Build FreeBSD: PASSED 6/rtems-mips on x86_64-freebsd13.0

OAR Tester rtems-tester at oarcorp.com
Sun May 1 06:34:49 UTC 2022


RTEMS Source Builder - Set Builder, 6 (a53d2c94322e)

Host: FreeBSD-13.0-RELEASE-amd64-64bit-ELF
       FreeBSD VM-FreeBSD13.rtems.com 13.0-RELEASE FreeBSD 13.0-RELEASE #0
       releng/13.0-n244733-ea31abc261f: Fri Apr  9 04:24:09 UTC 2021
       root at releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC
       amd64 amd64

Build Time: 0:12:06.002233

Sizes
=====

Maximum build usage: 5.009GB
Total size: 2.007GB
Installed : 1.209GB
Sources: 816.655MB
Patches: 216.722KB

Output
======

Build Set: 6/rtems-mips
config: devel/dtc-1.6.1-1.cfg
package: dtc-1.6.1-x86_64-freebsd13.0-1
building: dtc-1.6.1-x86_64-freebsd13.0-1
sizes: dtc-1.6.1-x86_64-freebsd13.0-1: 4.223MB (installed: 1.128MB)
cleaning: dtc-1.6.1-x86_64-freebsd13.0-1
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-freebsd13.0-1.txt
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-freebsd13.0-1.xml
config: devel/expat-2.4.8-1.cfg
package: expat-2.4.8-x86_64-freebsd13.0-1
building: expat-2.4.8-x86_64-freebsd13.0-1
sizes: expat-2.4.8-x86_64-freebsd13.0-1: 10.605MB (installed: 1.612MB)
cleaning: expat-2.4.8-x86_64-freebsd13.0-1
reporting: devel/expat-2.4.8-1.cfg -> expat-2.4.8-x86_64-freebsd13.0-1.txt
reporting: devel/expat-2.4.8-1.cfg -> expat-2.4.8-x86_64-freebsd13.0-1.xml
config: devel/gmp-6.2.1.cfg
package: gmp-6.2.1-x86_64-freebsd13.0-1
building: gmp-6.2.1-x86_64-freebsd13.0-1
sizes: gmp-6.2.1-x86_64-freebsd13.0-1: 22.693MB (installed: 1.728MB)
cleaning: gmp-6.2.1-x86_64-freebsd13.0-1
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-freebsd13.0-1.txt
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-freebsd13.0-1.xml
config: tools/rtems-gdb-11.2.cfg
package: mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1
building: mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1
sizes: mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1: 872.902MB (installed: 136.934MB)
cleaning: mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1
reporting: tools/rtems-gdb-11.2.cfg -> mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1.txt
reporting: tools/rtems-gdb-11.2.cfg -> mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1.xml
config: tools/rtems-binutils-2.38.cfg
package: mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1
building: mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1
sizes: mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1: 601.427MB (installed: 157.466MB)
cleaning: mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1
reporting: tools/rtems-binutils-2.38.cfg -> mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1.txt
reporting: tools/rtems-binutils-2.38.cfg -> mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1.xml
config: tools/rtems-gcc-10-newlib-head.cfg
package: mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1
building: mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1
sizes: mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1: 3.799GB (installed: 729.295MB)
cleaning: mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1
reporting: tools/rtems-gcc-10-newlib-head.cfg -> mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1.txt
reporting: tools/rtems-gcc-10-newlib-head.cfg -> mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1.xml
config: tools/rtems-tools-6.cfg
package: rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1
building: rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1
sizes: rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1: 291.104MB (installed: 73.951MB)
cleaning: rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1.xml
config: tools/rtems-mipstx39-gdb-11.2.cfg
package: mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1
building: mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1
sizes: mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1: 871.290MB (installed: 136.401MB)
cleaning: mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1
reporting: tools/rtems-mipstx39-gdb-11.2.cfg -> mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1.txt
reporting: tools/rtems-mipstx39-gdb-11.2.cfg -> mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1.xml
installing: dtc-1.6.1-x86_64-freebsd13.0-1 -> /home/tester/rtems-cron-6/tools/6
installing: expat-2.4.8-x86_64-freebsd13.0-1 -> /home/tester/rtems-cron-6/tools/6
installing: gmp-6.2.1-x86_64-freebsd13.0-1 -> /home/tester/rtems-cron-6/tools/6
installing: mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1 -> /home/tester/rtems-cron-6/tools/6
installing: mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1 -> /home/tester/rtems-cron-6/tools/6
installing: mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1 -> /home/tester/rtems-cron-6/tools/6
installing: rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1 -> /home/tester/rtems-cron-6/tools/6
installing: mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1 -> /home/tester/rtems-cron-6/tools/6
cleaning: dtc-1.6.1-x86_64-freebsd13.0-1
cleaning: expat-2.4.8-x86_64-freebsd13.0-1
cleaning: gmp-6.2.1-x86_64-freebsd13.0-1
cleaning: mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1
cleaning: mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1
cleaning: mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1
cleaning: rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1
cleaning: mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1
Build Sizes: usage: 5.009GB total: 2.007GB (sources: 816.655MB, patches: 216.722KB, installed 1.209GB)
Mailing report: build at rtems.org

Report
======

==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:22:49 2022
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-freebsd13.0-1
 Config: devel/dtc-1.6.1-1.cfg
 Summary:
  Device Tree Compiler v1.6.1 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  https://www.devicetree.org/
 Version:
  1.6.1
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
       sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.6.1
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.6.1
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  LIBS="${SB_HOST_LIBS}"
  CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
  gmake PREFIX=/home/tester/rtems-cron-6/tools/6
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.6.1
  gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/home/tester/rtems-cron-6/tools/6 install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:22:49 2022
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-freebsd13.0-1
 Config: devel/dtc-1.6.1-1.cfg
 Summary:
  Device Tree Compiler v1.6.1 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  https://www.devicetree.org/
 Version:
  1.6.1
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
       sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.6.1
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.6.1
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  LIBS="${SB_HOST_LIBS}"
  CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
  gmake PREFIX=/home/tester/rtems-cron-6/tools/6
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.6.1
  gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/home/tester/rtems-cron-6/tools/6 install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:22:53 2022
==============================================================================
Report: devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.4.8-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
Package: expat-2.4.8-x86_64-freebsd13.0-1
 Config: devel/expat-2.4.8-1.cfg
 Summary:
  Expat XML Parser v2.4.8 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  http://expat.sourceforge.net/
 Version:
  2.4.8
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_4_8/expat-2.4.8.tar.gz
       sha256: 398f6d95bf808d3108e27547b372cb4ac8dc2298a3c4251eb7aa3d4c6d4bb3e2
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.4.8
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.4.8
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --verbose  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --disable-shared
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.4.8
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:22:53 2022
==============================================================================
Report: devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.4.8-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
Package: expat-2.4.8-x86_64-freebsd13.0-1
 Config: devel/expat-2.4.8-1.cfg
 Summary:
  Expat XML Parser v2.4.8 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  http://expat.sourceforge.net/
 Version:
  2.4.8
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_4_8/expat-2.4.8.tar.gz
       sha256: 398f6d95bf808d3108e27547b372cb4ac8dc2298a3c4251eb7aa3d4c6d4bb3e2
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.4.8
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.4.8
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --verbose  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --disable-shared
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.4.8
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:23:11 2022
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-freebsd13.0-1
 Config: devel/gmp-6.2.1.cfg
 Summary:
  The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  https://gmplib.org/
 Version:
  6.2.1
 Release:
  1
  Sources: 1
    1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
       sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source gmp -q -n gmp-6.2.1
  %setup patch gmp -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd gmp-6.2.1
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --verbose  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --disable-shared
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd gmp-6.2.1
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:23:11 2022
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-freebsd13.0-1
 Config: devel/gmp-6.2.1.cfg
 Summary:
  The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  https://gmplib.org/
 Version:
  6.2.1
 Release:
  1
  Sources: 1
    1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
       sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source gmp -q -n gmp-6.2.1
  %setup patch gmp -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd gmp-6.2.1
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --verbose  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --disable-shared
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd gmp-6.2.1
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:24:37 2022
==============================================================================
Report: tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1
 Config: tools/rtems-gdb-11.2.cfg
 Summary:
  GDB v11.2 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  11.2
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
       sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-11.2"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-freebsd13.0" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --target=mips-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof    --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-sim  --enable-sim-hardware  --without-zlib  --with-expat  --with-guile=no  --with-libiconv-prefix=/usr/local  --with-python=/usr/local/bin/python3  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:24:37 2022
==============================================================================
Report: tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gdb-11.2-x86_64-freebsd13.0-1
 Config: tools/rtems-gdb-11.2.cfg
 Summary:
  GDB v11.2 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  11.2
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
       sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-11.2"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-freebsd13.0" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --target=mips-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof    --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-sim  --enable-sim-hardware  --without-zlib  --with-expat  --with-guile=no  --with-libiconv-prefix=/usr/local  --with-python=/usr/local/bin/python3  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:25:10 2022
==============================================================================
Report: tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.38.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1
 Config: tools/rtems-binutils-2.38.cfg
 Summary:
  Binutils v2.38 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.38
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/binutils/binutils-2.38.tar.bz2
       sha512: 7690b4158bd6587a85c6b98903980b9ac6f16b47f7fd1e60986b0a70388bedcfdc05d75597aa49c81fec1609ce24bed6c26583f76fd2471a9d63394fd9798afc
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.38"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-freebsd13.0" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --target=mips-rtems6  --verbose --disable-nls  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim  --enable-deterministic-archives  --enable-64-bit-bfd    --disable-lto  --without-included-gettext  --disable-win32-registry  --disable-werror  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info
  gmake -j 8 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:25:10 2022
==============================================================================
Report: tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.38.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-binutils-2.38-x86_64-freebsd13.0-1
 Config: tools/rtems-binutils-2.38.cfg
 Summary:
  Binutils v2.38 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.38
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/binutils/binutils-2.38.tar.bz2
       sha512: 7690b4158bd6587a85c6b98903980b9ac6f16b47f7fd1e60986b0a70388bedcfdc05d75597aa49c81fec1609ce24bed6c26583f76fd2471a9d63394fd9798afc
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.38"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-freebsd13.0" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --target=mips-rtems6  --verbose --disable-nls  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim  --enable-deterministic-archives  --enable-64-bit-bfd    --disable-lto  --without-included-gettext  --disable-win32-registry  --disable-werror  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info
  gmake -j 8 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:32:51 2022
==============================================================================
Report: tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-10-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1
 Config: tools/rtems-gcc-10-newlib-head.cfg
 Summary:
  GCC v0f001dd and Newlib v64b2081 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  http://gcc.gnu.org/
 Version:
  0f001dd
 Release:
  1
  Sources: 6
    1: --rsb-file=gnu-mirror-gcc-0f001dd.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/0f001dd
       No checksum
    2: --rsb-file=newlib-64b2081.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/64b2081
       No checksum
    3: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
       sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
    4: https://gcc.gnu.org/pub/gcc/infrastructure/mpc-1.0.3.tar.gz
       sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
    5: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
       sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
    6: https://gcc.gnu.org/pub/gcc/infrastructure/mpfr-3.1.6.tar.bz2
       sha512: 0c310dd7956be527884f8059c195a5aca1042b089d0927ac6341e6310b1250a7059bc61aaaab4dfb76c6ab8b67e440878ca203f72674529bbcb46770ed9b6885
  Patches: 2
    1: https://devel.rtems.org/raw-attachment/ticket/4196/0001-Back-port-v5-of-__gcov_info_to_gcda-to-GCC-10.patch
       No checksum
    2: https://devel.rtems.org/raw-attachment/ticket/4215/0001-nios2-Remove-custom-instruction-warnings.patch
       sha512: afd8a5e6bdcc5b75d5fbbf558bdf56ccac400521a6eec9d88cc95f6be67c481f2dbf8faa0f6ddc1e4ac7c56a84938714d80e46e9cf80ec4b8fcd739986449881
    3: https://devel.rtems.org/raw-attachment/ticket/4510/0001-aarch64-Add-ILP32-ABI-support-in-assembly-v2.patch
       sha512: 7ca237eabfd5b382713186e1fc290dfc999a353315795ecb8dd0d22fcd1ab7f5bf31f4329954adab91ad04c100dcac0e86d406fdbce8f82cf9dc23842c88caf6
 Preparation:
  build_top=$(pwd)
  gcc_source=gnu-mirror-gcc-0f001dd
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib=sourceware-mirror-newlib-cygwin-64b2081
  %setup source newlib -q -D -n ${source_dir_newlib}
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_isl="isl-0.18"
  %setup source isl -q -D -n isl-0.18
  %setup patch isl -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/isl
  ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
  source_dir_mpfr="mpfr-3.1.6"
  %setup source mpfr -q -D -n mpfr-3.1.6
  %setup patch mpfr -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpfr
  ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
  source_dir_mpc="mpc-1.0.3"
  %setup source mpc -q -D -n mpc-1.0.3
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  source_dir_gmp="gmp-6.2.1"
  %setup source gmp -q -D -n gmp-6.2.1
  %setup patch gmp -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/gmp
  ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
  echo "RTEMS 6, RSB a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1, Newlib 64b2081" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-freebsd13.0" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gcc}/configure  --prefix=/home/tester/rtems-cron-6/tools/6  --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec_prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include  --libdir=/home/tester/rtems-cron-6/tools/6/lib  --libexecdir=/home/tester/rtems-cron-6/tools/6/libexec  --mandir=/home/tester/rtems-cron-6/tools/6/share/man  --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --datadir=/home/tester/rtems-cron-6/tools/6/share  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --target=mips-rtems6  --disable-libstdcxx-pch  --with-gnu-as --with-gnu-ld --verbose  --with-newlib  --disable-nls --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-version-specific-runtime-libs  --disable-lto  --enable-newlib-io-c99-formats    --enable-newlib-iconv  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258  --enable-threads  --disable-plugin        --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-c++filt
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:32:51 2022
==============================================================================
Report: tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-10-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-10-newlib-head.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gcc-0f001dd-newlib-64b2081-x86_64-freebsd13.0-1
 Config: tools/rtems-gcc-10-newlib-head.cfg
 Summary:
  GCC v0f001dd and Newlib v64b2081 for target mips-rtems6 on host x86_64-freebsd13.0
 URL:
  http://gcc.gnu.org/
 Version:
  0f001dd
 Release:
  1
  Sources: 6
    1: --rsb-file=gnu-mirror-gcc-0f001dd.tar.gz https://codeload.github.com/RTEMS/gnu-mirror-gcc/tar.gz/0f001dd
       No checksum
    2: --rsb-file=newlib-64b2081.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/64b2081
       No checksum
    3: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.18.tar.bz2
       sha512: 85d0b40f4dbf14cb99d17aa07048cdcab2dc3eb527d2fbb1e84c41b2de5f351025370e57448b63b2b8a8cf8a0843a089c3263f9baee1542d5c2e1cb37ed39d94
    4: https://gcc.gnu.org/pub/gcc/infrastructure/mpc-1.0.3.tar.gz
       sha512: 0028b76df130720c1fad7de937a0d041224806ce5ef76589f19c7b49d956071a683e2f20d154c192a231e69756b19e48208f2889b0c13950ceb7b3cfaf059a43
    5: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
       sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
    6: https://gcc.gnu.org/pub/gcc/infrastructure/mpfr-3.1.6.tar.bz2
       sha512: 0c310dd7956be527884f8059c195a5aca1042b089d0927ac6341e6310b1250a7059bc61aaaab4dfb76c6ab8b67e440878ca203f72674529bbcb46770ed9b6885
  Patches: 2
    1: https://devel.rtems.org/raw-attachment/ticket/4196/0001-Back-port-v5-of-__gcov_info_to_gcda-to-GCC-10.patch
       No checksum
    2: https://devel.rtems.org/raw-attachment/ticket/4215/0001-nios2-Remove-custom-instruction-warnings.patch
       sha512: afd8a5e6bdcc5b75d5fbbf558bdf56ccac400521a6eec9d88cc95f6be67c481f2dbf8faa0f6ddc1e4ac7c56a84938714d80e46e9cf80ec4b8fcd739986449881
    3: https://devel.rtems.org/raw-attachment/ticket/4510/0001-aarch64-Add-ILP32-ABI-support-in-assembly-v2.patch
       sha512: 7ca237eabfd5b382713186e1fc290dfc999a353315795ecb8dd0d22fcd1ab7f5bf31f4329954adab91ad04c100dcac0e86d406fdbce8f82cf9dc23842c88caf6
 Preparation:
  build_top=$(pwd)
  gcc_source=gnu-mirror-gcc-0f001dd
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib=sourceware-mirror-newlib-cygwin-64b2081
  %setup source newlib -q -D -n ${source_dir_newlib}
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_isl="isl-0.18"
  %setup source isl -q -D -n isl-0.18
  %setup patch isl -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/isl
  ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
  source_dir_mpfr="mpfr-3.1.6"
  %setup source mpfr -q -D -n mpfr-3.1.6
  %setup patch mpfr -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpfr
  ln -s $PWD/${source_dir_mpfr} ${source_dir_gcc}/mpfr
  source_dir_mpc="mpc-1.0.3"
  %setup source mpc -q -D -n mpc-1.0.3
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  source_dir_gmp="gmp-6.2.1"
  %setup source gmp -q -D -n gmp-6.2.1
  %setup patch gmp -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/gmp
  ln -s $PWD/${source_dir_gmp} ${source_dir_gcc}/gmp
  echo "RTEMS 6, RSB a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1, Newlib 64b2081" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-freebsd13.0" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gcc}/configure  --prefix=/home/tester/rtems-cron-6/tools/6  --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec_prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include  --libdir=/home/tester/rtems-cron-6/tools/6/lib  --libexecdir=/home/tester/rtems-cron-6/tools/6/libexec  --mandir=/home/tester/rtems-cron-6/tools/6/share/man  --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --datadir=/home/tester/rtems-cron-6/tools/6/share  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --target=mips-rtems6  --disable-libstdcxx-pch  --with-gnu-as --with-gnu-ld --verbose  --with-newlib  --disable-nls --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-version-specific-runtime-libs  --disable-lto  --enable-newlib-io-c99-formats    --enable-newlib-iconv  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258  --enable-threads  --disable-plugin        --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/bin/mips-rtems6-c++filt
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:33:05 2022
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1
 Config: tools/rtems-tools-6.cfg
 Summary:
  RTEMS Tools 3c0e4f74f16e840958c0b1a824cb1dfeba8491fa for host x86_64-freebsd13.0
 URL:
  http://www.rtems.org/
 Version:
  3c0e4f74f16e840958c0b1a824cb1dfeba8491fa
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa.tar.bz2
       sha512: ugbldQjSr3yt5H/7EH6pMfUD8AjMTECOBrT2cxmHud3oxg2UTvZLTcubdKCgUFQMk8PVCY4+dmBpWOHtnQgzvg==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
  RT_HOST="--host=x86_64-freebsd13.0"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/tester/rtems-cron-6/tools/6
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:33:05 2022
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa-1
 Config: tools/rtems-tools-6.cfg
 Summary:
  RTEMS Tools 3c0e4f74f16e840958c0b1a824cb1dfeba8491fa for host x86_64-freebsd13.0
 URL:
  http://www.rtems.org/
 Version:
  3c0e4f74f16e840958c0b1a824cb1dfeba8491fa
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa.tar.bz2
       sha512: ugbldQjSr3yt5H/7EH6pMfUD8AjMTECOBrT2cxmHud3oxg2UTvZLTcubdKCgUFQMk8PVCY4+dmBpWOHtnQgzvg==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-3c0e4f74f16e840958c0b1a824cb1dfeba8491fa
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
  RT_HOST="--host=x86_64-freebsd13.0"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/tester/rtems-cron-6/tools/6
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:34:32 2022
==============================================================================
Report: tools/rtems-mipstx39-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-mipstx39-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-mipstx39-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1
 Config: tools/rtems-mipstx39-gdb-11.2.cfg
 Summary:
  GDB v11.2 for target mipstx39-rtems6 on host x86_64-freebsd13.0
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  11.2
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
       sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-11.2"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mipstx39-rtems6" -o "x86_64-freebsd13.0" == "mipstx39-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --target=mipstx39-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof    --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-sim  --enable-sim-hardware  --without-zlib  --with-expat  --with-guile=no  --with-libiconv-prefix=/usr/local  --with-python=/usr/local/bin/python3  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun May  1 01:34:32 2022
==============================================================================
Report: tools/rtems-mipstx39-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: a53d2c94322ed4fe261ba0c99bfb66a6cbd1def1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-mipstx39-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-mipstx39-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mipstx39-rtems6-gdb-11.2-x86_64-freebsd13.0-1
 Config: tools/rtems-mipstx39-gdb-11.2.cfg
 Summary:
  GDB v11.2 for target mipstx39-rtems6 on host x86_64-freebsd13.0
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  11.2
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
       sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-11.2"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mipstx39-rtems6" -o "x86_64-freebsd13.0" == "mipstx39-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.0-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.0-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-freebsd13.0" != "x86_64-freebsd13.0" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-freebsd13.0 --host=x86_64-freebsd13.0  --target=mipstx39-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof    --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-sim  --enable-sim-hardware  --without-zlib  --with-expat  --with-guile=no  --with-libiconv-prefix=/usr/local  --with-python=/usr/local/bin/python3  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info
  gmake -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}


More information about the build mailing list