[rtems-test] mipstx39/jmr3904: : Passed:1 Failed:0 Timeout:0 Test-Too-long:0 Invalid:593 Wrong:0

OAR Tester rtems-tester at oarcorp.com
Mon May 9 17:00:48 UTC 2022


Testing time     : 0:00:39.750936
Average test time: 0:00:00.066920

Host
====
Linux-3.10.0-1160.42.2.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.42.2.el7.x86_64 #1 SMP Tue Sep 7 14:49:57 UTC 2021 x86_64 x86_64)

Configuration
=============
Version: Not present in test
Build  : Not present in test
Tools  : Not present in test

Summary
=======

Passed:          1
Failed:          0
User Input:      0
Expected Fail:   0
Indeterminate:   0
Benchmark:       0
Timeout:         0
Test too long:   0
Invalid:       593
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
Wrong Header:    0
------------------
Total:         594

Invalid:
 sptasknopreempt01.exe
 block05.exe
 block15.exe
 sp08.exe
 paranoia.exe
 psxkey09.exe
 whetstone.exe
 psxtmrwlock01.exe
 termios.exe
 fsdosfsname02.exe
 psx13.exe
 spversion01.exe
 spclock_err02.exe
 mrfs_fsrename.exe
 block16.exe
 mimfs_fspermission.exe
 mdosfs_fserror.exe
 sptimer_err02.exe
 termios06.exe
 sp32.exe
 psxglobalcon02.exe
 tar01.exe
 spfatal10.exe
 heapwalk.exe
 psxclock01.exe
 sp71.exe
 psxtmmutex07.exe
 ts-userext.exe
 psxkey10.exe
 ts-validation-timecounter-1.exe
 psxtmcond02.exe
 tm31.exe
 psxcond01.exe
 block13.exe
 tm27.exe
 psxclockrealtime01.exe
 psxautoinit01.exe
 sp47.exe
 mdosfs_fsstatvfs.exe
 jffs2_fstime.exe
 psxtmcond06.exe
 ts-validation-acfg-0.exe
 imfs_fslink.exe
 sp74.exe
 mrfs_fstime.exe
 spcbssched02.exe
 sptimespec01.exe
 sparsedisk01.exe
 tm19.exe
 psxualarm.exe
 psxtmthread01.exe
 tm06.exe
 rbheap01.exe
 spconfig02.exe
 spcontext01.exe
 sp19.exe
 dl07.exe
 psxstrsignal01.exe
 spsem_err02.exe
 spmsgq_err01.exe
 block04.exe
 cdtest.exe
 spglobalcon02.exe
 psxid01.exe
 dumpbuf01.exe
 psxtmclocknanosleep01.exe
 psxfilelock01.exe
 psxtmmqrcvblock01.exe
 termios01.exe
 sp59.exe
 getentropy01.exe
 psxtmbarrier03.exe
 psxtmsem02.exe
 psx15.exe
 complex.exe
 psxstat.exe
 psxitimer.exe
 sptimecounter03.exe
 mimfs_fsscandir01.exe
 imfs_fssymlink.exe
 ttest01.exe
 sp03.exe
 dl01.exe
 spmsgq_err02.exe
 stringto01.exe
 sprmsched02.exe
 devnullfatal01.exe
 mdosfs_fsrdwr.exe
 sp24.exe
 mimfs_fssymlink.exe
 psxsignal08.exe
 pwdgrp01.exe
 psxstack01.exe
 psximfs01.exe
 psxtmmq01.exe
 exit02.exe
 spcache01.exe
 jffs2_fsrdwr.exe
 psxtmsem04.exe
 psxpasswd02.exe
 sprmsched01.exe
 sperror02.exe
 psxrwlock01.exe
 mimfs_fstime.exe
 sptls04.exe
 psxtmthread06.exe
 psxtmkey02.exe
 spconsole01.exe
 sp40.exe
 psxtmcleanup01.exe
 sptask_err02.exe
 psxalarm01.exe
 top.exe
 spcbssched01.exe
 psxconfstr.exe
 mimfs_fslink.exe
 psxtmthread05.exe
 sp20.exe
 psxtmbarrier01.exe
 spcpucounter01.exe
 mouse01.exe
 spsimplesched03.exe
 sp49.exe
 psxthreadname01.exe
 sp75.exe
 psxcancel.exe
 psx10.exe
 spfatal33.exe
 sperror01.exe
 psxtmmutexattr01.exe
 sp77.exe
 psxconcurrency01.exe
 psxtmthread04.exe
 pwdgrp02.exe
 tm25.exe
 psx11.exe
 spedfsched04.exe
 psxtmrwlock07.exe
 fsclose01.exe
 spfatal14.exe
 tm08.exe
 psxtmsem03.exe
 speventsystem01.exe
 psxstack02.exe
 ts-validation-timecounter-0.exe
 fileio.exe
 tmtimer01.exe
 sp27.exe
 psxtmmutex04.exe
 jffs2_fssymlink.exe
 psx03.exe
 psxcancel01.exe
 psxautoinit02.exe
 block03.exe
 rhtaskswitch.exe
 psxtmmutex05.exe
 termios04.exe
 ts-validation-tls-1.exe
 psx02.exe
 psxtmsleep01.exe
 psxclassic01.exe
 spatomic01.exe
 sp07.exe
 tm35.exe
 spfifo01.exe
 termios07.exe
 psxfile02.exe
 mimfs_fsrename.exe
 psxsignal03.exe
 rcxx01.exe
 spprintk.exe
 linpack.exe
 spchain.exe
 sp68.exe
 psxsem01.exe
 psxmutexattr01.exe
 dl04.exe
 sp60.exe
 sp45.exe
 mrfs_fsrdwr.exe
 sp72.exe
 spprivenv01.exe
 sp34.exe
 irqs01.exe
 block17.exe
 spedfsched02.exe
 spstdthreads01.exe
 sha.exe
 ts-validation-one-cpu-0.exe
 psx08.exe
 psxkey02.exe
 fsnofs01.exe
 tm11.exe
 sp55.exe
 termios09.exe
 mrfs_fssymlink.exe
 tm15.exe
 sp15.exe
 ts-validation-one-cpu-1.exe
 spfatal15.exe
 tar02.exe
 sp29.exe
 psxsignal05.exe
 tztest.exe
 psxgetattrnp01.exe
 sptask_err03.exe
 psxtimer01.exe
 psxtmthread03.exe
 psxaio02.exe
 psxspin01.exe
 fsimfsconfig03.exe
 bspcmdline01.exe
 imfs_fspatheval.exe
 tm24.exe
 mathf.exe
 spfreechain01.exe
 jffs2_fspatheval.exe
 spstkalloc03.exe
 psxtime.exe
 fsdosfswrite01.exe
 fsdosfssync01.exe
 tmcontext01.exe
 psxcleanup.exe
 psxtmcond04.exe
 psxkey05.exe
 sp37.exe
 ts-terminate.exe
 capture01.exe
 tm17.exe
 spfifo05.exe
 psxinttypes01.exe
 malloc02.exe
 psxtmsem05.exe
 spclock_err01.exe
 psxtmmutex02.exe
 fsdosfsformat01.exe
 sp23.exe
 psx05.exe
 psxmsgq01.exe
 mrfs_fserror.exe
 ts-performance-no-clock-0.exe
 ts-validation-acfg-1.exe
 spport_err01.exe
 psxtmsem01.exe
 block02.exe
 tm01.exe
 psxchroot01.exe
 sp63.exe
 spprofiling01.exe
 psxtmrwlock05.exe
 uid01.exe
 psxtmcond05.exe
 tmfine01.exe
 mdosfs_fstime.exe
 malloctest.exe
 psxmmap01.exe
 cpuuse.exe
 sp62.exe
 psxdevctl01.exe
 spfatal28.exe
 ticker.exe
 block07.exe
 sp31.exe
 psxmsgq03.exe
 psxmsgq02.exe
 mimfs_fsrdwr.exe
 sp41.exe
 tm36.exe
 spfatal12.exe
 imfs_fstime.exe
 jffs2_fslink.exe
 termios03.exe
 malloc03.exe
 psxsignal02.exe
 sp65.exe
 psxobj01.exe
 psxfile01.exe
 psxeintr_join.exe
 spinternalerror01.exe
 termios08.exe
 mdosfs_fspatheval.exe
 fsimfsconfig01.exe
 spsem03.exe
 spfatal05.exe
 psxtmrwlock03.exe
 tm13.exe
 psxkey06.exe
 sppartition_err01.exe
 jffs2_fspermission.exe
 sp11.exe
 sp17.exe
 dl09.exe
 spedfsched01.exe
 spfatal01.exe
 sp70.exe
 psxfchx01.exe
 sptimecounter01.exe
 fsrofs01.exe
 record01.exe
 psxglobalcon01.exe
 psxtmkey01.exe
 psxtmonce01.exe
 ts-validation-non-smp.exe
 sprbtree01.exe
 spthreadq01.exe
 sppagesize.exe
 spfatal30.exe
 psx04.exe
 fsrfsbitmap01.exe
 psxtmmutex03.exe
 mrfs_fspermission.exe
 tm33.exe
 tmonetoone.exe
 psxtmmqrcvblock02.exe
 sp56.exe
 tm28.exe
 jffs2_fserror.exe
 psx07.exe
 tm07.exe
 fsjffs2gc01.exe
 sp33.exe
 sptask_err01.exe
 sp76.exe
 i2c01.exe
 nsecs.exe
 tm20.exe
 sptls03.exe
 psxtmmutex06.exe
 spconfig01.exe
 psxtmrwlock06.exe
 psx01.exe
 spstkalloc.exe
 sp12.exe
 spheapprot.exe
 spsyslock01.exe
 psxtmnanosleep02.exe
 psxtmclocknanosleep02.exe
 spsimplesched01.exe
 psxrdwrv.exe
 psxtmthread02.exe
 spsignal_err01.exe
 fsimfsgeneric01.exe
 spmkdir.exe
 spwkspace.exe
 mrfs_fslink.exe
 psxgetrusage01.exe
 sp2038.exe
 spsimplesched02.exe
 sp25.exe
 sp35.exe
 sptask_err04.exe
 rhilatency.exe
 psxkey07.exe
 sp43.exe
 dl06.exe
 sp18.exe
 spfatal09.exe
 jffs2_fsscandir01.exe
 tm22.exe
 imfs_fsrdwr.exe
 sp01.exe
 spi01.exe
 psxfatal02.exe
 ts-unit-no-clock-0.exe
 libfdt01.exe
 dl02.exe
 sp26.exe
 psxfenv01.exe
 stackchk.exe
 tm09.exe
 sptimecounter02.exe
 spfatal11.exe
 psx14.exe
 spfifo04.exe
 sp57.exe
 block12.exe
 tm30.exe
 stackchk02.exe
 psxndbm01.exe
 spcpuset01.exe
 tm14.exe
 mrfs_fsfpathconf.exe
 psxtmcond01.exe
 sp13.exe
 iostream.exe
 rtmonuse.exe
 spstkalloc02.exe
 psxfatal01.exe
 psxtmthreadattr01.exe
 sptls01.exe
 psxkey01.exe
 spratemon_err01.exe
 spntp01.exe
 putenvtest.exe
 psxshm02.exe
 psxtmclocknanosleep03.exe
 psxaio01.exe
 ts-fatal-too-large-tls-size.exe
 block09.exe
 psxbarrier01.exe
 spregion_err01.exe
 unlimited.exe
 psxtmcond09.exe
 mdosfs_fsscandir01.exe
 sp21.exe
 psxkey03.exe
 mimfs_fserror.exe
 psxpipe01.exe
 ts-validation-io-kernel.exe
 psxconfig01.exe
 spcbssched03.exe
 sp50.exe
 psxtmcond10.exe
 psxtmbarrierattr01.exe
 deviceio01.exe
 block11.exe
 psxmsgq04.exe
 sp69.exe
 spclock_todhook01.exe
 spfifo02.exe
 spthread01.exe
 sp42.exe
 sp02.exe
 dl10.exe
 spfatal29.exe
 spfatal31.exe
 psxshm01.exe
 sp30.exe
 monitor.exe
 sp14.exe
 tm10.exe
 spmountmgr01.exe
 rhsemshuffle.exe
 ts-validation-1.exe
 psxsignal06.exe
 fsfseeko01.exe
 block10.exe
 termios05.exe
 spsize.exe
 tm03.exe
 rhtaskpreempt.exe
 psxtmbarrier04.exe
 sp52.exe
 sp06.exe
 sptimecounter04.exe
 spthreadlife01.exe
 devfs01.exe
 spsem_err01.exe
 ts-validation-intr.exe
 psxcleanup01.exe
 defaultconfig01.exe
 psxsignal07.exe
 spobjgetnext.exe
 psxftw01.exe
 ts-validation-tls-0.exe
 termios10.exe
 imfs_fspermission.exe
 fsimfsconfig02.exe
 psx06.exe
 tm05.exe
 devfs04.exe
 rhmlatency.exe
 psxtmmutex01.exe
 sptimerserver01.exe
 spedfsched03.exe
 psxcleanup02.exe
 md501.exe
 psx09.exe
 sp46.exe
 sp54.exe
 tar03.exe
 base_sp.exe
 dl03.exe
 rhdeadlockbrk.exe
 spintr_err01.exe
 spmisc01.exe
 spfatal03.exe
 psxenosys.exe
 sp48.exe
 fsdosfsname01.exe
 spmutex01.exe
 psxsignal04.exe
 spevent_err03.exe
 spsysinit01.exe
 block08.exe
 spfatal32.exe
 mimfs_fspatheval.exe
 block14.exe
 stackchk01.exe
 spfifo03.exe
 dhrystone.exe
 mathl.exe
 spassoc01.exe
 math.exe
 psxtimer02.exe
 tm02.exe
 sptls02.exe
 psx16.exe
 spscheduler01.exe
 spwatchdog.exe
 ttest02.exe
 tmck.exe
 spcxx01.exe
 tm21.exe
 shell01.exe
 sp66.exe
 psxkey08.exe
 tm16.exe
 splinkersets01.exe
 sppercpudata01.exe
 psxcond02.exe
 tm34.exe
 sp73.exe
 psxtmcond03.exe
 sp27a.exe
 tm12.exe
 sp04.exe
 spfatal34.exe
 tm18.exe
 sp53.exe
 flashdisk01.exe
 psx12.exe
 psxtmbarrier02.exe
 spsem02.exe
 psxkey04.exe
 sp67.exe
 sp51.exe
 sperror03.exe
 imfs_fsscandir01.exe
 spmrsp01.exe
 psxreaddir.exe
 mrfs_fspatheval.exe
 malloc04.exe
 tm23.exe
 block06.exe
 ts-validation-no-clock-0.exe
 sp22.exe
 exit01.exe
 record02.exe
 utf8proc01.exe
 sp44.exe
 dl08.exe
 sp16.exe
 crypt01.exe
 spqreslib.exe
 psxtmsleep02.exe
 tm32.exe
 spnsext01.exe
 capture.exe
 spsem01.exe
 imfs_fserror.exe
 tm26.exe
 psxonce01.exe
 psxsysconf.exe
 sp58.exe
 sp05.exe
 newlib01.exe
 spglobalcon01.exe
 spinternalerror02.exe
 psxclock.exe
 spextensions01.exe
 sp64.exe
 psxaio03.exe
 psxpasswd01.exe
 psxsignal01.exe
 ofw01.exe
 psxmount.exe
 psxtmcond08.exe
 psxtimes01.exe
 psximfs02.exe
 hello.exe
 termios11.exe
 ts-validation-cache.exe
 mrfs_fsscandir01.exe
 psxtmrwlock02.exe
 spfatal04.exe
 ts-validation-0.exe
 tm29.exe
 psxtmcond07.exe
 psxtmrwlock04.exe
 psxtmnanosleep01.exe
 speventtransient01.exe
 dl05.exe
 block01.exe
 spstkalloc04.exe
 sp38.exe
 termios02.exe
 ts-fatal-init-task-construct-failed.exe
 monitor02.exe
 psxusleep.exe
 sptimer_err01.exe
 fsbdpart01.exe
 tm04.exe
Log
===

RTEMS Testing - Tester, 6.0.not_released
 Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=jmr3904 --log=run-jmr3904.log --use-gitconfig --mail .
 Host: Linux VM-CentOS7 3.10.0-1160.42.2.el7.x86_64 #1 SMP Tue Sep 7 14:49:57 UTC 2021 x86_64
 Python: 2.7.5 (default, Nov 16 2020, 22:23:17) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]
Host: Linux-3.10.0-1160.42.2.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.42.2.el7.x86_64 #1 SMP Tue Sep 7 14:49:57 UTC 2021 x86_64 x86_64)
[  1/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: dhrystone.exe
Result: invalid   
Time: 0:00:00.777938 dhrystone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19550 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019550
=>  Loading section .init, size 0x48 lma ffffffff880195c0
=>  Loading section .fini, size 0x30 lma ffffffff88019608
=>  Loading section .ctors, size 0x8 lma ffffffff88019638
=>  Loading section .dtors, size 0x8 lma ffffffff88019640
=>  Loading section .rdata, size 0x270c lma ffffffff88019650
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bd60
=>  Loading section .data, size 0x5e4 lma ffffffff8801bd78
=>  Start address ffffffff88000004
=>  Transfer rate: 924288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  2/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: linpack.exe
Result: invalid   
Time: 0:00:00.786067 linpack.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ab10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ab10
=>  Loading section .init, size 0x48 lma ffffffff8801ab80
=>  Loading section .fini, size 0x30 lma ffffffff8801abc8
=>  Loading section .ctors, size 0x8 lma ffffffff8801abf8
=>  Loading section .dtors, size 0x8 lma ffffffff8801ac00
=>  Loading section .rdata, size 0x2484 lma ffffffff8801ac10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d098
=>  Loading section .data, size 0x5e4 lma ffffffff8801d0b0
=>  Start address ffffffff88000004
=>  Transfer rate: 963648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  3/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: whetstone.exe
Result: invalid   
Time: 0:00:00.778307 whetstone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19db0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019db0
=>  Loading section .init, size 0x48 lma ffffffff88019e20
=>  Loading section .fini, size 0x30 lma ffffffff88019e68
=>  Loading section .ctors, size 0x8 lma ffffffff88019e98
=>  Loading section .dtors, size 0x8 lma ffffffff88019ea0
=>  Loading section .rdata, size 0x2334 lma ffffffff88019eb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c1e8
=>  Loading section .data, size 0x5f4 lma ffffffff8801c200
=>  Start address ffffffff88000004
=>  Transfer rate: 933696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  4/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsbdpart01.exe
Result: invalid   
Time: 0:00:00.761722 fsbdpart01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022b50
=>  Loading section .init, size 0x48 lma ffffffff88022bc0
=>  Loading section .fini, size 0x30 lma ffffffff88022c08
=>  Loading section .ctors, size 0x8 lma ffffffff88022c38
=>  Loading section .dtors, size 0x8 lma ffffffff88022c40
=>  Loading section .rdata, size 0x28d0 lma ffffffff88022c50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025520
=>  Loading section .data, size 0x63c lma ffffffff88025538
=>  Start address ffffffff88000004
=>  Transfer rate: 1235808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  5/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsclose01.exe
Result: invalid   
Time: 0:00:00.782077 fsclose01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ab30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ab30
=>  Loading section .init, size 0x48 lma ffffffff8801aba0
=>  Loading section .fini, size 0x30 lma ffffffff8801abe8
=>  Loading section .ctors, size 0x8 lma ffffffff8801ac18
=>  Loading section .dtors, size 0x8 lma ffffffff8801ac20
=>  Loading section .rdata, size 0x23b0 lma ffffffff8801ac30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cfe0
=>  Loading section .data, size 0x5ec lma ffffffff8801cff8
=>  Start address ffffffff88000004
=>  Transfer rate: 962272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  6/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsdosfsformat01.exe
Result: invalid   
Time: 0:00:00.768560 fsdosfsformat01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2ade0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8802ade0
=>  Loading section .init, size 0x48 lma ffffffff8802ae50
=>  Loading section .fini, size 0x30 lma ffffffff8802ae98
=>  Loading section .ctors, size 0x8 lma ffffffff8802aec8
=>  Loading section .dtors, size 0x8 lma ffffffff8802aed0
=>  Loading section .rdata, size 0x2b40 lma ffffffff8802aee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802da20
=>  Loading section .data, size 0x614 lma ffffffff8802da38
=>  Start address ffffffff88000004
=>  Transfer rate: 1507872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  7/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsdosfsname01.exe
Result: invalid   
Time: 0:00:00.774704 fsdosfsname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x32380 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88032380
=>  Loading section .init, size 0x48 lma ffffffff880323f0
=>  Loading section .fini, size 0x30 lma ffffffff88032438
=>  Loading section .ctors, size 0x8 lma ffffffff88032468
=>  Loading section .dtors, size 0x8 lma ffffffff88032470
=>  Loading section .rdata, size 0x121740 lma ffffffff88032480
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88153bc0
=>  Loading section .data, size 0x2c514 lma ffffffff88153bd8
=>  Start address ffffffff88000004
=>  Transfer rate: 12584736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  8/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | mipstx39/jmr3904: fsdosfsname02.exe
Result: invalid   
Time: 0:00:00.758484 fsdosfsname02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x25ac0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88025ac0
=>  Loading section .init, size 0x48 lma ffffffff88025b30
=>  Loading section .fini, size 0x30 lma ffffffff88025b78
=>  Loading section .ctors, size 0x8 lma ffffffff88025ba8
=>  Loading section .dtors, size 0x8 lma ffffffff88025bb0
=>  Loading section .rdata, size 0x2918 lma ffffffff88025bc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880284d8
=>  Loading section .data, size 0x62c lma ffffffff880284f0
=>  Start address ffffffff88000004
=>  Transfer rate: 1333408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  9/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsdosfssync01.exe
Result: invalid   
Time: 0:00:00.253686 fsdosfssync01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26a50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88026a50
=>  Loading section .init, size 0x48 lma ffffffff88026ac0
=>  Loading section .fini, size 0x30 lma ffffffff88026b08
=>  Loading section .ctors, size 0x8 lma ffffffff88026b38
=>  Loading section .dtors, size 0x8 lma ffffffff88026b40
=>  Loading section .rdata, size 0x27d0 lma ffffffff88026b50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88029320
=>  Loading section .data, size 0x63c lma ffffffff88029338
=>  Start address ffffffff88000004
=>  Transfer rate: 1362784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 10/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsdosfswrite01.exe
Result: invalid   
Time: 0:00:00.257940 fsdosfswrite01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27d80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027d80
=>  Loading section .init, size 0x48 lma ffffffff88027df0
=>  Loading section .fini, size 0x30 lma ffffffff88027e38
=>  Loading section .ctors, size 0x8 lma ffffffff88027e68
=>  Loading section .dtors, size 0x8 lma ffffffff88027e70
=>  Loading section .rdata, size 0x28c8 lma ffffffff88027e80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802a748
=>  Loading section .data, size 0x614 lma ffffffff8802a760
=>  Start address ffffffff88000004
=>  Transfer rate: 1403744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 11/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsfseeko01.exe
Result: invalid   
Time: 0:00:00.264223 fsfseeko01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12860 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012860
=>  Loading section .init, size 0x48 lma ffffffff880128d0
=>  Loading section .fini, size 0x30 lma ffffffff88012918
=>  Loading section .ctors, size 0x8 lma ffffffff88012948
=>  Loading section .dtors, size 0x8 lma ffffffff88012950
=>  Loading section .rdata, size 0x1a70 lma ffffffff88012960
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880143d0
=>  Loading section .data, size 0x450 lma ffffffff880143e8
=>  Start address ffffffff88000004
=>  Transfer rate: 672128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 12/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsimfsconfig01.exe
Result: invalid   
Time: 0:00:00.253586 fsimfsconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88010a50
=>  Loading section .init, size 0x48 lma ffffffff88010ab0
=>  Loading section .fini, size 0x30 lma ffffffff88010af8
=>  Loading section .ctors, size 0x8 lma ffffffff88010b28
=>  Loading section .dtors, size 0x8 lma ffffffff88010b30
=>  Loading section .rdata, size 0x1b14 lma ffffffff88010b40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012658
=>  Loading section .data, size 0x400 lma ffffffff88012670
=>  Start address ffffffff88000004
=>  Transfer rate: 611104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 13/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsimfsconfig02.exe
Result: invalid   
Time: 0:00:00.260720 fsimfsconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd30
=>  Loading section .init, size 0x48 lma ffffffff8800fda0
=>  Loading section .fini, size 0x30 lma ffffffff8800fde8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe18
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe20
=>  Loading section .rdata, size 0x1a65 lma ffffffff8800fe30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011898
=>  Loading section .data, size 0x440 lma ffffffff880118b0
=>  Start address ffffffff88000004
=>  Transfer rate: 583464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 14/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsimfsconfig03.exe
Result: invalid   
Time: 0:00:00.255365 fsimfsconfig03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88010b60
=>  Loading section .init, size 0x48 lma ffffffff88010bc0
=>  Loading section .fini, size 0x30 lma ffffffff88010c08
=>  Loading section .ctors, size 0x8 lma ffffffff88010c38
=>  Loading section .dtors, size 0x8 lma ffffffff88010c40
=>  Loading section .rdata, size 0x1a85 lma ffffffff88010c50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126d8
=>  Loading section .data, size 0x400 lma ffffffff880126f0
=>  Start address ffffffff88000004
=>  Transfer rate: 612136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 15/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsimfsgeneric01.exe
Result: invalid   
Time: 0:00:00.256973 fsimfsgeneric01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12f20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012f20
=>  Loading section .init, size 0x48 lma ffffffff88012f90
=>  Loading section .fini, size 0x30 lma ffffffff88012fd8
=>  Loading section .ctors, size 0x8 lma ffffffff88013008
=>  Loading section .dtors, size 0x8 lma ffffffff88013010
=>  Loading section .rdata, size 0x1d90 lma ffffffff88013020
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014db0
=>  Loading section .data, size 0x480 lma ffffffff88014dc8
=>  Start address ffffffff88000004
=>  Transfer rate: 692736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 16/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:8   W:0   | mipstx39/jmr3904: fsjffs2gc01.exe
Result: invalid   
Time: 0:00:00.340362 fsjffs2gc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ee20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ee20
=>  Loading section .init, size 0x48 lma ffffffff8801ee90
=>  Loading section .fini, size 0x30 lma ffffffff8801eed8
=>  Loading section .ctors, size 0x8 lma ffffffff8801ef08
=>  Loading section .dtors, size 0x8 lma ffffffff8801ef10
=>  Loading section .rdata, size 0x5279 lma ffffffff8801ef20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880241a0
=>  Loading section .data, size 0x214f0 lma ffffffff880241b8
=>  Start address ffffffff88000004
=>  Transfer rate: 2274504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 17/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: fsnofs01.exe
Result: invalid   
Time: 0:00:00.269471 fsnofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe6c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800e6c0
=>  Loading section .init, size 0x48 lma ffffffff8800e730
=>  Loading section .fini, size 0x30 lma ffffffff8800e778
=>  Loading section .ctors, size 0x8 lma ffffffff8800e7a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800e7b0
=>  Loading section .rdata, size 0x1f20 lma ffffffff8800e7c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880106e0
=>  Loading section .data, size 0x430 lma ffffffff880106f8
=>  Start address ffffffff88000004
=>  Transfer rate: 547072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 18/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: fsrfsbitmap01.exe
Result: invalid   
Time: 0:00:00.258914 fsrfsbitmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22490 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022490
=>  Loading section .init, size 0x48 lma ffffffff88022500
=>  Loading section .fini, size 0x30 lma ffffffff88022548
=>  Loading section .ctors, size 0x8 lma ffffffff88022578
=>  Loading section .dtors, size 0x8 lma ffffffff88022580
=>  Loading section .rdata, size 0x5730 lma ffffffff88022590
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027cc0
=>  Loading section .data, size 0x4c8 lma ffffffff88027cd8
=>  Start address ffffffff88000004
=>  Transfer rate: 1313984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 19/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: fsrofs01.exe
Result: invalid   
Time: 0:00:00.264118 fsrofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x212a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880212a0
=>  Loading section .init, size 0x48 lma ffffffff88021310
=>  Loading section .fini, size 0x30 lma ffffffff88021358
=>  Loading section .ctors, size 0x8 lma ffffffff88021388
=>  Loading section .dtors, size 0x8 lma ffffffff88021390
=>  Loading section .rdata, size 0x4c34 lma ffffffff880213a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025fd8
=>  Loading section .data, size 0x4a0 lma ffffffff88025ff0
=>  Start address ffffffff88000004
=>  Transfer rate: 1254432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 20/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fserror.exe
Result: invalid   
Time: 0:00:00.259466 imfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018920
=>  Loading section .init, size 0x48 lma ffffffff88018990
=>  Loading section .fini, size 0x30 lma ffffffff880189d8
=>  Loading section .ctors, size 0x8 lma ffffffff88018a08
=>  Loading section .dtors, size 0x8 lma ffffffff88018a10
=>  Loading section .rdata, size 0x2560 lma ffffffff88018a20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801af80
=>  Loading section .data, size 0x5f4 lma ffffffff8801af98
=>  Start address ffffffff88000004
=>  Transfer rate: 896032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 21/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fslink.exe
Result: invalid   
Time: 0:00:00.281145 imfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110d0
=>  Loading section .init, size 0x48 lma ffffffff88011140
=>  Loading section .fini, size 0x30 lma ffffffff88011188
=>  Loading section .ctors, size 0x8 lma ffffffff880111b8
=>  Loading section .dtors, size 0x8 lma ffffffff880111c0
=>  Loading section .rdata, size 0x1b9d lma ffffffff880111d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d70
=>  Loading section .data, size 0x488 lma ffffffff88012d88
=>  Start address ffffffff88000004
=>  Transfer rate: 626728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 22/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.267018 imfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11de0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011de0
=>  Loading section .init, size 0x48 lma ffffffff88011e50
=>  Loading section .fini, size 0x30 lma ffffffff88011e98
=>  Loading section .ctors, size 0x8 lma ffffffff88011ec8
=>  Loading section .dtors, size 0x8 lma ffffffff88011ed0
=>  Loading section .rdata, size 0x1d21 lma ffffffff88011ee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c08
=>  Loading section .data, size 0x488 lma ffffffff88013c20
=>  Start address ffffffff88000004
=>  Transfer rate: 656584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 23/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fspermission.exe
Result: invalid   
Time: 0:00:00.266859 imfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18b90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018b90
=>  Loading section .init, size 0x48 lma ffffffff88018c00
=>  Loading section .fini, size 0x30 lma ffffffff88018c48
=>  Loading section .ctors, size 0x8 lma ffffffff88018c78
=>  Loading section .dtors, size 0x8 lma ffffffff88018c80
=>  Loading section .rdata, size 0x23f8 lma ffffffff88018c90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b088
=>  Loading section .data, size 0x5f4 lma ffffffff8801b0a0
=>  Start address ffffffff88000004
=>  Transfer rate: 898144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 24/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:16  W:0   | mipstx39/jmr3904: imfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.252064 imfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013ab0
=>  Loading section .init, size 0x48 lma ffffffff88013b20
=>  Loading section .fini, size 0x30 lma ffffffff88013b68
=>  Loading section .ctors, size 0x8 lma ffffffff88013b98
=>  Loading section .dtors, size 0x8 lma ffffffff88013ba0
=>  Loading section .rdata, size 0x2021 lma ffffffff88013bb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015bd8
=>  Loading section .data, size 0x488 lma ffffffff88015bf0
=>  Start address ffffffff88000004
=>  Transfer rate: 721736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 25/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: imfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.254869 imfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c30
=>  Loading section .init, size 0x48 lma ffffffff88011ca0
=>  Loading section .fini, size 0x30 lma ffffffff88011ce8
=>  Loading section .ctors, size 0x8 lma ffffffff88011d18
=>  Loading section .dtors, size 0x8 lma ffffffff88011d20
=>  Loading section .rdata, size 0x1bb1 lma ffffffff88011d30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138e8
=>  Loading section .data, size 0x488 lma ffffffff88013900
=>  Start address ffffffff88000004
=>  Transfer rate: 650184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 26/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: imfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.259539 imfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11650 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011650
=>  Loading section .init, size 0x48 lma ffffffff880116c0
=>  Loading section .fini, size 0x30 lma ffffffff88011708
=>  Loading section .ctors, size 0x8 lma ffffffff88011738
=>  Loading section .dtors, size 0x8 lma ffffffff88011740
=>  Loading section .rdata, size 0x1cf9 lma ffffffff88011750
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013450
=>  Loading section .data, size 0x488 lma ffffffff88013468
=>  Start address ffffffff88000004
=>  Transfer rate: 640776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 27/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: imfs_fstime.exe
Result: invalid   
Time: 0:00:00.258455 imfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x126f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880126f0
=>  Loading section .init, size 0x48 lma ffffffff88012760
=>  Loading section .fini, size 0x30 lma ffffffff880127a8
=>  Loading section .ctors, size 0x8 lma ffffffff880127d8
=>  Loading section .dtors, size 0x8 lma ffffffff880127e0
=>  Loading section .rdata, size 0x1cd4 lma ffffffff880127f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880144c8
=>  Loading section .data, size 0x494 lma ffffffff880144e0
=>  Start address ffffffff88000004
=>  Transfer rate: 674624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 28/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fserror.exe
Result: invalid   
Time: 0:00:00.257505 jffs2_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x265c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880265c0
=>  Loading section .init, size 0x48 lma ffffffff88026630
=>  Loading section .fini, size 0x30 lma ffffffff88026678
=>  Loading section .ctors, size 0x8 lma ffffffff880266a8
=>  Loading section .dtors, size 0x8 lma ffffffff880266b0
=>  Loading section .rdata, size 0x5958 lma ffffffff880266c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c018
=>  Loading section .data, size 0x21654 lma ffffffff8802c030
=>  Start address ffffffff88000004
=>  Transfer rate: 2536416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 29/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fslink.exe
Result: invalid   
Time: 0:00:00.261919 jffs2_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ede0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ede0
=>  Loading section .init, size 0x48 lma ffffffff8801ee50
=>  Loading section .fini, size 0x30 lma ffffffff8801ee98
=>  Loading section .ctors, size 0x8 lma ffffffff8801eec8
=>  Loading section .dtors, size 0x8 lma ffffffff8801eed0
=>  Loading section .rdata, size 0x4fd9 lma ffffffff8801eee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023ec0
=>  Loading section .data, size 0x214e8 lma ffffffff88023ed8
=>  Start address ffffffff88000004
=>  Transfer rate: 2268552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 30/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fspatheval.exe
Result: invalid   
Time: 0:00:00.266493 jffs2_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1faf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801faf0
=>  Loading section .init, size 0x48 lma ffffffff8801fb60
=>  Loading section .fini, size 0x30 lma ffffffff8801fba8
=>  Loading section .ctors, size 0x8 lma ffffffff8801fbd8
=>  Loading section .dtors, size 0x8 lma ffffffff8801fbe0
=>  Loading section .rdata, size 0x515d lma ffffffff8801fbf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024d50
=>  Loading section .data, size 0x214e8 lma ffffffff88024d68
=>  Start address ffffffff88000004
=>  Transfer rate: 2298408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 31/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fspermission.exe
Result: invalid   
Time: 0:00:00.257454 jffs2_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26830 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88026830
=>  Loading section .init, size 0x48 lma ffffffff880268a0
=>  Loading section .fini, size 0x30 lma ffffffff880268e8
=>  Loading section .ctors, size 0x8 lma ffffffff88026918
=>  Loading section .dtors, size 0x8 lma ffffffff88026920
=>  Loading section .rdata, size 0x57f8 lma ffffffff88026930
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c128
=>  Loading section .data, size 0x21654 lma ffffffff8802c140
=>  Start address ffffffff88000004
=>  Transfer rate: 2538592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 32/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:24  W:0   | mipstx39/jmr3904: jffs2_fsrdwr.exe
Result: invalid   
Time: 0:00:00.254521 jffs2_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x216d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880216d0
=>  Loading section .init, size 0x48 lma ffffffff88021740
=>  Loading section .fini, size 0x30 lma ffffffff88021788
=>  Loading section .ctors, size 0x8 lma ffffffff880217b8
=>  Loading section .dtors, size 0x8 lma ffffffff880217c0
=>  Loading section .rdata, size 0x5465 lma ffffffff880217d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026c38
=>  Loading section .data, size 0x214f0 lma ffffffff88026c50
=>  Start address ffffffff88000004
=>  Transfer rate: 2361768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 33/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: jffs2_fsscandir01.exe
Result: invalid   
Time: 0:00:00.265198 jffs2_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1f920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801f920
=>  Loading section .init, size 0x48 lma ffffffff8801f990
=>  Loading section .fini, size 0x30 lma ffffffff8801f9d8
=>  Loading section .ctors, size 0x8 lma ffffffff8801fa08
=>  Loading section .dtors, size 0x8 lma ffffffff8801fa10
=>  Loading section .rdata, size 0x4fed lma ffffffff8801fa20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024a10
=>  Loading section .data, size 0x214e8 lma ffffffff88024a28
=>  Start address ffffffff88000004
=>  Transfer rate: 2291752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 34/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: jffs2_fssymlink.exe
Result: invalid   
Time: 0:00:00.254112 jffs2_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1f280 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801f280
=>  Loading section .init, size 0x48 lma ffffffff8801f2f0
=>  Loading section .fini, size 0x30 lma ffffffff8801f338
=>  Loading section .ctors, size 0x8 lma ffffffff8801f368
=>  Loading section .dtors, size 0x8 lma ffffffff8801f370
=>  Loading section .rdata, size 0x5135 lma ffffffff8801f380
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880244b8
=>  Loading section .data, size 0x214e8 lma ffffffff880244d0
=>  Start address ffffffff88000004
=>  Transfer rate: 2280808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 35/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: jffs2_fstime.exe
Result: invalid   
Time: 0:00:00.257708 jffs2_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x203f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880203f0
=>  Loading section .init, size 0x48 lma ffffffff88020460
=>  Loading section .fini, size 0x30 lma ffffffff880204a8
=>  Loading section .ctors, size 0x8 lma ffffffff880204d8
=>  Loading section .dtors, size 0x8 lma ffffffff880204e0
=>  Loading section .rdata, size 0x5110 lma ffffffff880204f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025600
=>  Loading section .data, size 0x214f4 lma ffffffff88025618
=>  Start address ffffffff88000004
=>  Transfer rate: 2316320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 36/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fserror.exe
Result: invalid   
Time: 0:00:00.259899 mdosfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2bc10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8802bc10
=>  Loading section .init, size 0x48 lma ffffffff8802bc80
=>  Loading section .fini, size 0x30 lma ffffffff8802bcc8
=>  Loading section .ctors, size 0x8 lma ffffffff8802bcf8
=>  Loading section .dtors, size 0x8 lma ffffffff8802bd00
=>  Loading section .rdata, size 0x2fd0 lma ffffffff8802bd10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802ece0
=>  Loading section .data, size 0x67c lma ffffffff8802ecf8
=>  Start address ffffffff88000004
=>  Transfer rate: 1547104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 37/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.254933 mdosfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27f40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027f40
=>  Loading section .init, size 0x48 lma ffffffff88027fb0
=>  Loading section .fini, size 0x30 lma ffffffff88027ff8
=>  Loading section .ctors, size 0x8 lma ffffffff88028028
=>  Loading section .dtors, size 0x8 lma ffffffff88028030
=>  Loading section .rdata, size 0x2ba0 lma ffffffff88028040
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802abe0
=>  Loading section .data, size 0x67c lma ffffffff8802abf8
=>  Start address ffffffff88000004
=>  Transfer rate: 1413984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 38/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.255629 mdosfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x29d00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88029d00
=>  Loading section .init, size 0x48 lma ffffffff88029d70
=>  Loading section .fini, size 0x30 lma ffffffff88029db8
=>  Loading section .ctors, size 0x8 lma ffffffff88029de8
=>  Loading section .dtors, size 0x8 lma ffffffff88029df0
=>  Loading section .rdata, size 0x2e98 lma ffffffff88029e00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802cc98
=>  Loading section .data, size 0x67c lma ffffffff8802ccb0
=>  Start address ffffffff88000004
=>  Transfer rate: 1480992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 39/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.256951 mdosfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28240 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028240
=>  Loading section .init, size 0x48 lma ffffffff880282b0
=>  Loading section .fini, size 0x30 lma ffffffff880282f8
=>  Loading section .ctors, size 0x8 lma ffffffff88028328
=>  Loading section .dtors, size 0x8 lma ffffffff88028330
=>  Loading section .rdata, size 0x2a28 lma ffffffff88028340
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802ad68
=>  Loading section .data, size 0x67c lma ffffffff8802ad80
=>  Start address ffffffff88000004
=>  Transfer rate: 1417120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 40/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:32  W:0   | mipstx39/jmr3904: mdosfs_fsstatvfs.exe
Result: invalid   
Time: 0:00:00.253317 mdosfs_fsstatvfs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27340 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027340
=>  Loading section .init, size 0x48 lma ffffffff880273b0
=>  Loading section .fini, size 0x30 lma ffffffff880273f8
=>  Loading section .ctors, size 0x8 lma ffffffff88027428
=>  Loading section .dtors, size 0x8 lma ffffffff88027430
=>  Loading section .rdata, size 0x2b80 lma ffffffff88027440
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88029fc0
=>  Loading section .data, size 0x67c lma ffffffff88029fd8
=>  Start address ffffffff88000004
=>  Transfer rate: 1389152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 41/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:33  W:0   | mipstx39/jmr3904: mdosfs_fstime.exe
Result: invalid   
Time: 0:00:00.251777 mdosfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28a30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028a30
=>  Loading section .init, size 0x48 lma ffffffff88028aa0
=>  Loading section .fini, size 0x30 lma ffffffff88028ae8
=>  Loading section .ctors, size 0x8 lma ffffffff88028b18
=>  Loading section .dtors, size 0x8 lma ffffffff88028b20
=>  Loading section .rdata, size 0x2b34 lma ffffffff88028b30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b668
=>  Loading section .data, size 0x688 lma ffffffff8802b680
=>  Start address ffffffff88000004
=>  Transfer rate: 1435616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 42/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:41  W:0   | mipstx39/jmr3904: mimfs_fserror.exe
Result: invalid   
Time: 0:00:00.268104 mimfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19570 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019570
=>  Loading section .init, size 0x48 lma ffffffff880195e0
=>  Loading section .fini, size 0x30 lma ffffffff88019628
=>  Loading section .ctors, size 0x8 lma ffffffff88019658
=>  Loading section .dtors, size 0x8 lma ffffffff88019660
=>  Loading section .rdata, size 0x2680 lma ffffffff88019670
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bcf0
=>  Loading section .data, size 0x624 lma ffffffff8801bd08
=>  Start address ffffffff88000004
=>  Transfer rate: 923936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 43/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:41  W:0   | mipstx39/jmr3904: mimfs_fslink.exe
Result: invalid   
Time: 0:00:00.258515 mimfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011d20
=>  Loading section .init, size 0x48 lma ffffffff88011d90
=>  Loading section .fini, size 0x30 lma ffffffff88011dd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011e08
=>  Loading section .dtors, size 0x8 lma ffffffff88011e10
=>  Loading section .rdata, size 0x1cc1 lma ffffffff88011e20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ae8
=>  Loading section .data, size 0x4b8 lma ffffffff88013b00
=>  Start address ffffffff88000004
=>  Transfer rate: 654664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 44/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:41  W:0   | mipstx39/jmr3904: mimfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.263652 mimfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12a30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012a30
=>  Loading section .init, size 0x48 lma ffffffff88012aa0
=>  Loading section .fini, size 0x30 lma ffffffff88012ae8
=>  Loading section .ctors, size 0x8 lma ffffffff88012b18
=>  Loading section .dtors, size 0x8 lma ffffffff88012b20
=>  Loading section .rdata, size 0x1e45 lma ffffffff88012b30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014978
=>  Loading section .data, size 0x4b8 lma ffffffff88014990
=>  Start address ffffffff88000004
=>  Transfer rate: 684520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 45/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:41  W:0   | mipstx39/jmr3904: mimfs_fspermission.exe
Result: invalid   
Time: 0:00:00.255560 mimfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x197f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880197f0
=>  Loading section .init, size 0x48 lma ffffffff88019860
=>  Loading section .fini, size 0x30 lma ffffffff880198a8
=>  Loading section .ctors, size 0x8 lma ffffffff880198d8
=>  Loading section .dtors, size 0x8 lma ffffffff880198e0
=>  Loading section .rdata, size 0x2520 lma ffffffff880198f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801be10
=>  Loading section .data, size 0x624 lma ffffffff8801be28
=>  Start address ffffffff88000004
=>  Transfer rate: 926240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 46/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:41  W:0   | mipstx39/jmr3904: mimfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.263626 mimfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14700 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014700
=>  Loading section .init, size 0x48 lma ffffffff88014770
=>  Loading section .fini, size 0x30 lma ffffffff880147b8
=>  Loading section .ctors, size 0x8 lma ffffffff880147e8
=>  Loading section .dtors, size 0x8 lma ffffffff880147f0
=>  Loading section .rdata, size 0x2145 lma ffffffff88014800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016948
=>  Loading section .data, size 0x4b8 lma ffffffff88016960
=>  Start address ffffffff88000004
=>  Transfer rate: 749672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 47/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:41  W:0   | mipstx39/jmr3904: mimfs_fsrename.exe
Result: invalid   
Time: 0:00:00.260017 mimfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c540 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801c540
=>  Loading section .init, size 0x48 lma ffffffff8801c5b0
=>  Loading section .fini, size 0x30 lma ffffffff8801c5f8
=>  Loading section .ctors, size 0x8 lma ffffffff8801c628
=>  Loading section .dtors, size 0x8 lma ffffffff8801c630
=>  Loading section .rdata, size 0x2ba8 lma ffffffff8801c640
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f1e8
=>  Loading section .data, size 0x624 lma ffffffff8801f200
=>  Start address ffffffff88000004
=>  Transfer rate: 1032416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 48/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:41  W:0   | mipstx39/jmr3904: mimfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.266112 mimfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12880 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012880
=>  Loading section .init, size 0x48 lma ffffffff880128f0
=>  Loading section .fini, size 0x30 lma ffffffff88012938
=>  Loading section .ctors, size 0x8 lma ffffffff88012968
=>  Loading section .dtors, size 0x8 lma ffffffff88012970
=>  Loading section .rdata, size 0x1cd5 lma ffffffff88012980
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014658
=>  Loading section .data, size 0x4b8 lma ffffffff88014670
=>  Start address ffffffff88000004
=>  Transfer rate: 678120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 49/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:41  W:0   | mipstx39/jmr3904: mimfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.264309 mimfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x122b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880122b0
=>  Loading section .init, size 0x48 lma ffffffff88012320
=>  Loading section .fini, size 0x30 lma ffffffff88012368
=>  Loading section .ctors, size 0x8 lma ffffffff88012398
=>  Loading section .dtors, size 0x8 lma ffffffff880123a0
=>  Loading section .rdata, size 0x1e1d lma ffffffff880123b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880141d0
=>  Loading section .data, size 0x4b8 lma ffffffff880141e8
=>  Start address ffffffff88000004
=>  Transfer rate: 668840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 50/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:49  W:0   | mipstx39/jmr3904: mimfs_fstime.exe
Result: invalid   
Time: 0:00:00.254775 mimfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13350 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013350
=>  Loading section .init, size 0x48 lma ffffffff880133c0
=>  Loading section .fini, size 0x30 lma ffffffff88013408
=>  Loading section .ctors, size 0x8 lma ffffffff88013438
=>  Loading section .dtors, size 0x8 lma ffffffff88013440
=>  Loading section .rdata, size 0x1df8 lma ffffffff88013450
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015248
=>  Loading section .data, size 0x4c4 lma ffffffff88015260
=>  Start address ffffffff88000004
=>  Transfer rate: 702688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 51/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:49  W:0   | mipstx39/jmr3904: mrfs_fserror.exe
Result: invalid   
Time: 0:00:00.253942 mrfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28830 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028830
=>  Loading section .init, size 0x48 lma ffffffff880288a0
=>  Loading section .fini, size 0x30 lma ffffffff880288e8
=>  Loading section .ctors, size 0x8 lma ffffffff88028918
=>  Loading section .dtors, size 0x8 lma ffffffff88028920
=>  Loading section .rdata, size 0x5728 lma ffffffff88028930
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802e058
=>  Loading section .data, size 0x634 lma ffffffff8802e070
=>  Start address ffffffff88000004
=>  Transfer rate: 1520864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 52/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:49  W:0   | mipstx39/jmr3904: mrfs_fsfpathconf.exe
Result: invalid   
Time: 0:00:00.256208 mrfs_fsfpathconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20c10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88020c10
=>  Loading section .init, size 0x48 lma ffffffff88020c80
=>  Loading section .fini, size 0x30 lma ffffffff88020cc8
=>  Loading section .ctors, size 0x8 lma ffffffff88020cf8
=>  Loading section .dtors, size 0x8 lma ffffffff88020d00
=>  Loading section .rdata, size 0x4f58 lma ffffffff88020d10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025c68
=>  Loading section .data, size 0x4c8 lma ffffffff88025c80
=>  Start address ffffffff88000004
=>  Transfer rate: 1247744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 53/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:49  W:0   | mipstx39/jmr3904: mrfs_fslink.exe
Result: invalid   
Time: 0:00:00.258643 mrfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21130 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021130
=>  Loading section .init, size 0x48 lma ffffffff880211a0
=>  Loading section .fini, size 0x30 lma ffffffff880211e8
=>  Loading section .ctors, size 0x8 lma ffffffff88021218
=>  Loading section .dtors, size 0x8 lma ffffffff88021220
=>  Loading section .rdata, size 0x4d78 lma ffffffff88021230
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025fa8
=>  Loading section .data, size 0x4c8 lma ffffffff88025fc0
=>  Start address ffffffff88000004
=>  Transfer rate: 1254400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 54/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:49  W:0   | mipstx39/jmr3904: mrfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.263678 mrfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21b70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021b70
=>  Loading section .init, size 0x48 lma ffffffff88021be0
=>  Loading section .fini, size 0x30 lma ffffffff88021c28
=>  Loading section .ctors, size 0x8 lma ffffffff88021c58
=>  Loading section .dtors, size 0x8 lma ffffffff88021c60
=>  Loading section .rdata, size 0x4f00 lma ffffffff88021c70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026b70
=>  Loading section .data, size 0x4c8 lma ffffffff88026b88
=>  Start address ffffffff88000004
=>  Transfer rate: 1278528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 55/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:49  W:0   | mipstx39/jmr3904: mrfs_fspermission.exe
Result: invalid   
Time: 0:00:00.257288 mrfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028ab0
=>  Loading section .init, size 0x48 lma ffffffff88028b20
=>  Loading section .fini, size 0x30 lma ffffffff88028b68
=>  Loading section .ctors, size 0x8 lma ffffffff88028b98
=>  Loading section .dtors, size 0x8 lma ffffffff88028ba0
=>  Loading section .rdata, size 0x55d0 lma ffffffff88028bb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802e180
=>  Loading section .data, size 0x634 lma ffffffff8802e198
=>  Start address ffffffff88000004
=>  Transfer rate: 1523232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 56/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:49  W:0   | mipstx39/jmr3904: mrfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.264572 mrfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23a80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88023a80
=>  Loading section .init, size 0x48 lma ffffffff88023af0
=>  Loading section .fini, size 0x30 lma ffffffff88023b38
=>  Loading section .ctors, size 0x8 lma ffffffff88023b68
=>  Loading section .dtors, size 0x8 lma ffffffff88023b70
=>  Loading section .rdata, size 0x51fc lma ffffffff88023b80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028d80
=>  Loading section .data, size 0x4c8 lma ffffffff88028d98
=>  Start address ffffffff88000004
=>  Transfer rate: 1348256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 57/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:49  W:0   | mipstx39/jmr3904: mrfs_fsrename.exe
Result: invalid   
Time: 0:00:00.258846 mrfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2b800 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8802b800
=>  Loading section .init, size 0x48 lma ffffffff8802b870
=>  Loading section .fini, size 0x30 lma ffffffff8802b8b8
=>  Loading section .ctors, size 0x8 lma ffffffff8802b8e8
=>  Loading section .dtors, size 0x8 lma ffffffff8802b8f0
=>  Loading section .rdata, size 0x5c60 lma ffffffff8802b900
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88031560
=>  Loading section .data, size 0x634 lma ffffffff88031578
=>  Start address ffffffff88000004
=>  Transfer rate: 1629472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 58/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:57  W:0   | mipstx39/jmr3904: mrfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.255736 mrfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21e70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021e70
=>  Loading section .init, size 0x48 lma ffffffff88021ee0
=>  Loading section .fini, size 0x30 lma ffffffff88021f28
=>  Loading section .ctors, size 0x8 lma ffffffff88021f58
=>  Loading section .dtors, size 0x8 lma ffffffff88021f60
=>  Loading section .rdata, size 0x4d94 lma ffffffff88021f70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026d08
=>  Loading section .data, size 0x4c8 lma ffffffff88026d20
=>  Start address ffffffff88000004
=>  Transfer rate: 1281760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 59/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:57  W:0   | mipstx39/jmr3904: mrfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.252810 mrfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x215c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880215c0
=>  Loading section .init, size 0x48 lma ffffffff88021630
=>  Loading section .fini, size 0x30 lma ffffffff88021678
=>  Loading section .ctors, size 0x8 lma ffffffff880216a8
=>  Loading section .dtors, size 0x8 lma ffffffff880216b0
=>  Loading section .rdata, size 0x4ed8 lma ffffffff880216c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026598
=>  Loading section .data, size 0x4c8 lma ffffffff880265b0
=>  Start address ffffffff88000004
=>  Transfer rate: 1266560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 60/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:57  W:0   | mipstx39/jmr3904: mrfs_fstime.exe
Result: invalid   
Time: 0:00:00.259386 mrfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22650 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022650
=>  Loading section .init, size 0x48 lma ffffffff880226c0
=>  Loading section .fini, size 0x30 lma ffffffff88022708
=>  Loading section .ctors, size 0x8 lma ffffffff88022738
=>  Loading section .dtors, size 0x8 lma ffffffff88022740
=>  Loading section .rdata, size 0x4e98 lma ffffffff88022750
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880275e8
=>  Loading section .data, size 0x4d4 lma ffffffff88027600
=>  Start address ffffffff88000004
=>  Transfer rate: 1300064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 61/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:57  W:0   | mipstx39/jmr3904: block01.exe
Result: invalid   
Time: 0:00:00.255627 block01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15d90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015d90
=>  Loading section .init, size 0x48 lma ffffffff88015e00
=>  Loading section .fini, size 0x30 lma ffffffff88015e48
=>  Loading section .ctors, size 0x8 lma ffffffff88015e78
=>  Loading section .dtors, size 0x8 lma ffffffff88015e80
=>  Loading section .rdata, size 0x1cd8 lma ffffffff88015e90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017b68
=>  Loading section .data, size 0x478 lma ffffffff88017b80
=>  Start address ffffffff88000004
=>  Transfer rate: 786304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 62/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:57  W:0   | mipstx39/jmr3904: block02.exe
Result: invalid   
Time: 0:00:00.255758 block02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14870 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014870
=>  Loading section .init, size 0x48 lma ffffffff880148e0
=>  Loading section .fini, size 0x30 lma ffffffff88014928
=>  Loading section .ctors, size 0x8 lma ffffffff88014958
=>  Loading section .dtors, size 0x8 lma ffffffff88014960
=>  Loading section .rdata, size 0x1c90 lma ffffffff88014970
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016600
=>  Loading section .data, size 0x468 lma ffffffff88016618
=>  Start address ffffffff88000004
=>  Transfer rate: 742336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 63/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:57  W:0   | mipstx39/jmr3904: block03.exe
Result: invalid   
Time: 0:00:00.257481 block03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14800 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014800
=>  Loading section .init, size 0x48 lma ffffffff88014870
=>  Loading section .fini, size 0x30 lma ffffffff880148b8
=>  Loading section .ctors, size 0x8 lma ffffffff880148e8
=>  Loading section .dtors, size 0x8 lma ffffffff880148f0
=>  Loading section .rdata, size 0x1c78 lma ffffffff88014900
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016578
=>  Loading section .data, size 0x468 lma ffffffff88016590
=>  Start address ffffffff88000004
=>  Transfer rate: 741248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 64/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:57  W:0   | mipstx39/jmr3904: block04.exe
Result: invalid   
Time: 0:00:00.254523 block04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014790
=>  Loading section .init, size 0x48 lma ffffffff88014800
=>  Loading section .fini, size 0x30 lma ffffffff88014848
=>  Loading section .ctors, size 0x8 lma ffffffff88014878
=>  Loading section .dtors, size 0x8 lma ffffffff88014880
=>  Loading section .rdata, size 0x1c10 lma ffffffff88014890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880164a0
=>  Loading section .data, size 0x468 lma ffffffff880164b8
=>  Start address ffffffff88000004
=>  Transfer rate: 739520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 65/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:57  W:0   | mipstx39/jmr3904: block05.exe
Result: invalid   
Time: 0:00:00.258204 block05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15a50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015a50
=>  Loading section .init, size 0x48 lma ffffffff88015ac0
=>  Loading section .fini, size 0x30 lma ffffffff88015b08
=>  Loading section .ctors, size 0x8 lma ffffffff88015b38
=>  Loading section .dtors, size 0x8 lma ffffffff88015b40
=>  Loading section .rdata, size 0x1c58 lma ffffffff88015b50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880177a8
=>  Loading section .data, size 0x478 lma ffffffff880177c0
=>  Start address ffffffff88000004
=>  Transfer rate: 778624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 66/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:65  W:0   | mipstx39/jmr3904: block06.exe
Result: invalid   
Time: 0:00:00.272830 block06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e790
=>  Loading section .init, size 0x48 lma ffffffff8801e800
=>  Loading section .fini, size 0x30 lma ffffffff8801e848
=>  Loading section .ctors, size 0x8 lma ffffffff8801e878
=>  Loading section .dtors, size 0x8 lma ffffffff8801e880
=>  Loading section .rdata, size 0x2dd0 lma ffffffff8801e890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021660
=>  Loading section .data, size 0x614 lma ffffffff88021678
=>  Start address ffffffff88000004
=>  Transfer rate: 1106976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 67/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:65  W:0   | mipstx39/jmr3904: block07.exe
Result: invalid   
Time: 0:00:00.254832 block07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14b70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014b70
=>  Loading section .init, size 0x48 lma ffffffff88014be0
=>  Loading section .fini, size 0x30 lma ffffffff88014c28
=>  Loading section .ctors, size 0x8 lma ffffffff88014c58
=>  Loading section .dtors, size 0x8 lma ffffffff88014c60
=>  Loading section .rdata, size 0x1cec lma ffffffff88014c70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016960
=>  Loading section .data, size 0x468 lma ffffffff88016978
=>  Start address ffffffff88000004
=>  Transfer rate: 749216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 68/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:65  W:0   | mipstx39/jmr3904: block08.exe
Result: invalid   
Time: 0:00:00.273288 block08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801c150
=>  Loading section .init, size 0x48 lma ffffffff8801c1d0
=>  Loading section .fini, size 0x30 lma ffffffff8801c218
=>  Loading section .ctors, size 0x8 lma ffffffff8801c248
=>  Loading section .dtors, size 0x8 lma ffffffff8801c250
=>  Loading section .rdata, size 0x2540 lma ffffffff8801c260
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e7a0
=>  Loading section .data, size 0x510 lma ffffffff8801e7b8
=>  Start address ffffffff88000004
=>  Transfer rate: 1009152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 69/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:65  W:0   | mipstx39/jmr3904: block09.exe
Result: invalid   
Time: 0:00:00.254588 block09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x151d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880151d0
=>  Loading section .init, size 0x48 lma ffffffff88015240
=>  Loading section .fini, size 0x30 lma ffffffff88015288
=>  Loading section .ctors, size 0x8 lma ffffffff880152b8
=>  Loading section .dtors, size 0x8 lma ffffffff880152c0
=>  Loading section .rdata, size 0x1c18 lma ffffffff880152d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ee8
=>  Loading section .data, size 0x478 lma ffffffff88016f00
=>  Start address ffffffff88000004
=>  Transfer rate: 760704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 70/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:65  W:0   | mipstx39/jmr3904: block10.exe
Result: invalid   
Time: 0:00:00.258022 block10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15b30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015b30
=>  Loading section .init, size 0x48 lma ffffffff88015ba0
=>  Loading section .fini, size 0x30 lma ffffffff88015be8
=>  Loading section .ctors, size 0x8 lma ffffffff88015c18
=>  Loading section .dtors, size 0x8 lma ffffffff88015c20
=>  Loading section .rdata, size 0x1e40 lma ffffffff88015c30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017a70
=>  Loading section .data, size 0x478 lma ffffffff88017a88
=>  Start address ffffffff88000004
=>  Transfer rate: 784320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 71/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:65  W:0   | mipstx39/jmr3904: block11.exe
Result: invalid   
Time: 0:00:00.254983 block11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16630 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016630
=>  Loading section .init, size 0x48 lma ffffffff880166a0
=>  Loading section .fini, size 0x30 lma ffffffff880166e8
=>  Loading section .ctors, size 0x8 lma ffffffff88016718
=>  Loading section .dtors, size 0x8 lma ffffffff88016720
=>  Loading section .rdata, size 0x1e20 lma ffffffff88016730
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018550
=>  Loading section .data, size 0x490 lma ffffffff88018568
=>  Start address ffffffff88000004
=>  Transfer rate: 806784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 72/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:65  W:0   | mipstx39/jmr3904: block12.exe
Result: invalid   
Time: 0:00:00.257416 block12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014c40
=>  Loading section .init, size 0x48 lma ffffffff88014cb0
=>  Loading section .fini, size 0x30 lma ffffffff88014cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88014d28
=>  Loading section .dtors, size 0x8 lma ffffffff88014d30
=>  Loading section .rdata, size 0x1c41 lma ffffffff88014d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016988
=>  Loading section .data, size 0x4b0 lma ffffffff880169a0
=>  Start address ffffffff88000004
=>  Transfer rate: 750088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 73/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:65  W:0   | mipstx39/jmr3904: block13.exe
Result: invalid   
Time: 0:00:00.256319 block13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14d60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014d60
=>  Loading section .init, size 0x48 lma ffffffff88014dd0
=>  Loading section .fini, size 0x30 lma ffffffff88014e18
=>  Loading section .ctors, size 0x8 lma ffffffff88014e48
=>  Loading section .dtors, size 0x8 lma ffffffff88014e50
=>  Loading section .rdata, size 0x2185 lma ffffffff88014e60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016fe8
=>  Loading section .data, size 0x478 lma ffffffff88017000
=>  Start address ffffffff88000004
=>  Transfer rate: 762728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 74/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:73  W:0   | mipstx39/jmr3904: block14.exe
Result: invalid   
Time: 0:00:00.262717 block14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15010 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015010
=>  Loading section .init, size 0x48 lma ffffffff88015080
=>  Loading section .fini, size 0x30 lma ffffffff880150c8
=>  Loading section .ctors, size 0x8 lma ffffffff880150f8
=>  Loading section .dtors, size 0x8 lma ffffffff88015100
=>  Loading section .rdata, size 0x25d5 lma ffffffff88015110
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880176e8
=>  Loading section .data, size 0x478 lma ffffffff88017700
=>  Start address ffffffff88000004
=>  Transfer rate: 777064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 75/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:73  W:0   | mipstx39/jmr3904: block15.exe
Result: invalid   
Time: 0:00:00.256925 block15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14db0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014db0
=>  Loading section .init, size 0x48 lma ffffffff88014e20
=>  Loading section .fini, size 0x30 lma ffffffff88014e68
=>  Loading section .ctors, size 0x8 lma ffffffff88014e98
=>  Loading section .dtors, size 0x8 lma ffffffff88014ea0
=>  Loading section .rdata, size 0x1d0d lma ffffffff88014eb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016bc0
=>  Loading section .data, size 0x478 lma ffffffff88016bd8
=>  Start address ffffffff88000004
=>  Transfer rate: 754216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 76/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:73  W:0   | mipstx39/jmr3904: block16.exe
Result: invalid   
Time: 0:00:00.257673 block16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15040 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015040
=>  Loading section .init, size 0x48 lma ffffffff880150b0
=>  Loading section .fini, size 0x30 lma ffffffff880150f8
=>  Loading section .ctors, size 0x8 lma ffffffff88015128
=>  Loading section .dtors, size 0x8 lma ffffffff88015130
=>  Loading section .rdata, size 0x1cbd lma ffffffff88015140
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016e00
=>  Loading section .data, size 0x478 lma ffffffff88016e18
=>  Start address ffffffff88000004
=>  Transfer rate: 758824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 77/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:73  W:0   | mipstx39/jmr3904: block17.exe
Result: invalid   
Time: 0:00:00.259827 block17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880144a0
=>  Loading section .init, size 0x48 lma ffffffff88014510
=>  Loading section .fini, size 0x30 lma ffffffff88014558
=>  Loading section .ctors, size 0x8 lma ffffffff88014588
=>  Loading section .dtors, size 0x8 lma ffffffff88014590
=>  Loading section .rdata, size 0x1b65 lma ffffffff880145a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016108
=>  Loading section .data, size 0x478 lma ffffffff88016120
=>  Start address ffffffff88000004
=>  Transfer rate: 732264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 78/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:73  W:0   | mipstx39/jmr3904: bspcmdline01.exe
Result: invalid   
Time: 0:00:00.253917 bspcmdline01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10550 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010550
=>  Loading section .init, size 0x48 lma ffffffff880105c0
=>  Loading section .fini, size 0x30 lma ffffffff88010608
=>  Loading section .ctors, size 0x8 lma ffffffff88010638
=>  Loading section .dtors, size 0x8 lma ffffffff88010640
=>  Loading section .rdata, size 0x1f55 lma ffffffff88010650
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125a8
=>  Loading section .data, size 0x440 lma ffffffff880125c0
=>  Start address ffffffff88000004
=>  Transfer rate: 610216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 79/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:73  W:0   | mipstx39/jmr3904: capture01.exe
Result: invalid   
Time: 0:00:00.254577 capture01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e200 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801e200
=>  Loading section .init, size 0x48 lma ffffffff8801e280
=>  Loading section .fini, size 0x30 lma ffffffff8801e2c8
=>  Loading section .ctors, size 0x8 lma ffffffff8801e2f8
=>  Loading section .dtors, size 0x8 lma ffffffff8801e300
=>  Loading section .rdata, size 0x2818 lma ffffffff8801e310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020b28
=>  Loading section .data, size 0x644 lma ffffffff88020b40
=>  Start address ffffffff88000004
=>  Transfer rate: 1084384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 80/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:73  W:0   | mipstx39/jmr3904: complex.exe
Result: invalid   
Time: 0:00:00.259842 complex.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x25260 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88025260
=>  Loading section .init, size 0x48 lma ffffffff880252d0
=>  Loading section .fini, size 0x30 lma ffffffff88025318
=>  Loading section .ctors, size 0x8 lma ffffffff88025348
=>  Loading section .dtors, size 0x8 lma ffffffff88025350
=>  Loading section .rdata, size 0x2f70 lma ffffffff88025360
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880282d0
=>  Loading section .data, size 0x5ec lma ffffffff880282e8
=>  Start address ffffffff88000004
=>  Transfer rate: 1328736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 81/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:73  W:0   | mipstx39/jmr3904: cpuuse.exe
Result: invalid   
Time: 0:00:00.260117 cpuuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12b90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012b90
=>  Loading section .init, size 0x48 lma ffffffff88012c00
=>  Loading section .fini, size 0x30 lma ffffffff88012c48
=>  Loading section .ctors, size 0x8 lma ffffffff88012c78
=>  Loading section .dtors, size 0x8 lma ffffffff88012c80
=>  Loading section .rdata, size 0x2510 lma ffffffff88012c90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880151a0
=>  Loading section .data, size 0x648 lma ffffffff880151b8
=>  Start address ffffffff88000004
=>  Transfer rate: 704448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 82/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:81  W:0   | mipstx39/jmr3904: crypt01.exe
Result: invalid   
Time: 0:00:00.252362 crypt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24d80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88024d80
=>  Loading section .init, size 0x48 lma ffffffff88024df0
=>  Loading section .fini, size 0x30 lma ffffffff88024e38
=>  Loading section .ctors, size 0x8 lma ffffffff88024e68
=>  Loading section .dtors, size 0x8 lma ffffffff88024e70
=>  Loading section .rdata, size 0x2c38 lma ffffffff88024e80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027ab8
=>  Loading section .data, size 0x61c lma ffffffff88027ad0
=>  Start address ffffffff88000004
=>  Transfer rate: 1312544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 83/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:81  W:0   | mipstx39/jmr3904: defaultconfig01.exe
Result: invalid   
Time: 0:00:00.259215 defaultconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14680 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014680
=>  Loading section .init, size 0x48 lma ffffffff88014700
=>  Loading section .fini, size 0x30 lma ffffffff88014748
=>  Loading section .ctors, size 0x8 lma ffffffff88014778
=>  Loading section .dtors, size 0x8 lma ffffffff88014780
=>  Loading section .rdata, size 0x1cac lma ffffffff88014790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016440
=>  Loading section .data, size 0x5e8 lma ffffffff88016458
=>  Start address ffffffff88000004
=>  Transfer rate: 741792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 84/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:81  W:0   | mipstx39/jmr3904: devfs01.exe
Result: invalid   
Time: 0:00:00.276233 devfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xc8d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800c8d0
=>  Loading section .init, size 0x48 lma ffffffff8800c940
=>  Loading section .fini, size 0x30 lma ffffffff8800c988
=>  Loading section .ctors, size 0x8 lma ffffffff8800c9b8
=>  Loading section .dtors, size 0x8 lma ffffffff8800c9c0
=>  Loading section .rdata, size 0x1885 lma ffffffff8800c9d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e258
=>  Loading section .data, size 0x440 lma ffffffff8800e270
=>  Start address ffffffff88000004
=>  Transfer rate: 472360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 85/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:81  W:0   | mipstx39/jmr3904: devfs04.exe
Result: invalid   
Time: 0:00:00.261142 devfs04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xd630 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800d630
=>  Loading section .init, size 0x48 lma ffffffff8800d6a0
=>  Loading section .fini, size 0x30 lma ffffffff8800d6e8
=>  Loading section .ctors, size 0x8 lma ffffffff8800d718
=>  Loading section .dtors, size 0x8 lma ffffffff8800d720
=>  Loading section .rdata, size 0x1a59 lma ffffffff8800d730
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800f190
=>  Loading section .data, size 0x424 lma ffffffff8800f1a8
=>  Start address ffffffff88000004
=>  Transfer rate: 503272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 86/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:81  W:0   | mipstx39/jmr3904: deviceio01.exe
Result: invalid   
Time: 0:00:00.258884 deviceio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107f0
=>  Loading section .init, size 0x48 lma ffffffff88010860
=>  Loading section .fini, size 0x30 lma ffffffff880108a8
=>  Loading section .ctors, size 0x8 lma ffffffff880108d8
=>  Loading section .dtors, size 0x8 lma ffffffff880108e0
=>  Loading section .rdata, size 0x1b21 lma ffffffff880108f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012418
=>  Loading section .data, size 0x468 lma ffffffff88012430
=>  Start address ffffffff88000004
=>  Transfer rate: 607304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 87/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:81  W:0   | mipstx39/jmr3904: devnullfatal01.exe
Result: invalid   
Time: 0:00:00.256541 devnullfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103d0
=>  Loading section .init, size 0x48 lma ffffffff88010440
=>  Loading section .fini, size 0x30 lma ffffffff88010488
=>  Loading section .ctors, size 0x8 lma ffffffff880104b8
=>  Loading section .dtors, size 0x8 lma ffffffff880104c0
=>  Loading section .rdata, size 0x1efd lma ffffffff880104d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123d0
=>  Loading section .data, size 0x450 lma ffffffff880123e8
=>  Start address ffffffff88000004
=>  Transfer rate: 606568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 88/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:81  W:0   | mipstx39/jmr3904: dl01.exe
Result: invalid   
Time: 0:00:00.258235 dl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27b00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027b00
=>  Loading section .init, size 0x48 lma ffffffff88027b70
=>  Loading section .fini, size 0x30 lma ffffffff88027bb8
=>  Loading section .ctors, size 0x8 lma ffffffff88027be8
=>  Loading section .dtors, size 0x8 lma ffffffff88027bf0
=>  Loading section .rdata, size 0xc058 lma ffffffff88027c00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033c58
=>  Loading section .data, size 0x5f8 lma ffffffff88033c70
=>  Start address ffffffff88000004
=>  Transfer rate: 1708800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 89/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:81  W:0   | mipstx39/jmr3904: dl02.exe
Result: invalid   
Time: 0:00:00.257640 dl02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27b70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027b70
=>  Loading section .init, size 0x48 lma ffffffff88027be0
=>  Loading section .fini, size 0x30 lma ffffffff88027c28
=>  Loading section .ctors, size 0x8 lma ffffffff88027c58
=>  Loading section .dtors, size 0x8 lma ffffffff88027c60
=>  Loading section .rdata, size 0xe830 lma ffffffff88027c70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880364a0
=>  Loading section .data, size 0x5f0 lma ffffffff880364b8
=>  Start address ffffffff88000004
=>  Transfer rate: 1791232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 90/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:82  W:0   | mipstx39/jmr3904: dl03.exe
Result: invalid   
Time: 0:00:00.254065 dl03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b6a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801b6a0
=>  Loading section .init, size 0x48 lma ffffffff8801b710
=>  Loading section .fini, size 0x30 lma ffffffff8801b758
=>  Loading section .ctors, size 0x8 lma ffffffff8801b788
=>  Loading section .dtors, size 0x8 lma ffffffff8801b790
=>  Loading section .rdata, size 0x2d48 lma ffffffff8801b7a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e4e8
=>  Loading section .data, size 0x664 lma ffffffff8801e500
=>  Start address ffffffff88000004
=>  Transfer rate: 1006304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 91/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:90  W:0   | mipstx39/jmr3904: dl04.exe
Result: invalid   
Time: 0:00:00.256873 dl04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027620
=>  Loading section .init, size 0x48 lma ffffffff88027690
=>  Loading section .fini, size 0x30 lma ffffffff880276d8
=>  Loading section .ctors, size 0x8 lma ffffffff88027708
=>  Loading section .dtors, size 0x8 lma ffffffff88027710
=>  Loading section .rdata, size 0xbf38 lma ffffffff88027720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033658
=>  Loading section .data, size 0x5e0 lma ffffffff88033670
=>  Start address ffffffff88000004
=>  Transfer rate: 1696320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 92/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:90  W:0   | mipstx39/jmr3904: dl05.exe
Result: invalid   
Time: 0:00:00.260491 dl05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x3bfb8 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x78 lma ffffffff8803bfb8
=>  Loading section .init, size 0x48 lma ffffffff8803c030
=>  Loading section .fini, size 0x30 lma ffffffff8803c078
=>  Loading section .ctors, size 0x18 lma ffffffff8803c0a8
=>  Loading section .dtors, size 0x8 lma ffffffff8803c0c0
=>  Loading section .rdata, size 0x1496c lma ffffffff8803c0d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88050a40
=>  Loading section .rel.dyn, size 0x18 lma ffffffff88050a58
=>  Loading section .data, size 0x698 lma ffffffff88050a70
=>  Loading section .sdata, size 0x4 lma ffffffff88051108
=>  Start address ffffffff88000004
=>  Transfer rate: 2656256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 93/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:90  W:0   | mipstx39/jmr3904: dl06.exe
Result: invalid   
Time: 0:00:00.259722 dl06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27ad0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027ad0
=>  Loading section .init, size 0x48 lma ffffffff88027b40
=>  Loading section .fini, size 0x30 lma ffffffff88027b88
=>  Loading section .ctors, size 0x8 lma ffffffff88027bb8
=>  Loading section .dtors, size 0x8 lma ffffffff88027bc0
=>  Loading section .rdata, size 0xe820 lma ffffffff88027bd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880363f0
=>  Loading section .data, size 0x5f0 lma ffffffff88036408
=>  Start address ffffffff88000004
=>  Transfer rate: 1789824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 94/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:90  W:0   | mipstx39/jmr3904: dl07.exe
Result: invalid   
Time: 0:00:00.261840 dl07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27ee0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027ee0
=>  Loading section .init, size 0x48 lma ffffffff88027f50
=>  Loading section .fini, size 0x30 lma ffffffff88027f98
=>  Loading section .ctors, size 0x8 lma ffffffff88027fc8
=>  Loading section .dtors, size 0x8 lma ffffffff88027fd0
=>  Loading section .rdata, size 0x189f8 lma ffffffff88027fe0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880409d8
=>  Loading section .data, size 0x5e0 lma ffffffff880409f0
=>  Start address ffffffff88000004
=>  Transfer rate: 2129472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 95/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:90  W:0   | mipstx39/jmr3904: dl08.exe
Result: invalid   
Time: 0:00:00.251523 dl08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27b90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027b90
=>  Loading section .init, size 0x48 lma ffffffff88027c00
=>  Loading section .fini, size 0x30 lma ffffffff88027c48
=>  Loading section .ctors, size 0x8 lma ffffffff88027c78
=>  Loading section .dtors, size 0x8 lma ffffffff88027c80
=>  Loading section .rdata, size 0x188f0 lma ffffffff88027c90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88040580
=>  Loading section .data, size 0x5e0 lma ffffffff88040598
=>  Start address ffffffff88000004
=>  Transfer rate: 2120576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 96/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:90  W:0   | mipstx39/jmr3904: dl09.exe
Result: invalid   
Time: 0:00:00.253903 dl09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27e00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027e00
=>  Loading section .init, size 0x48 lma ffffffff88027e70
=>  Loading section .fini, size 0x30 lma ffffffff88027eb8
=>  Loading section .ctors, size 0x8 lma ffffffff88027ee8
=>  Loading section .dtors, size 0x8 lma ffffffff88027ef0
=>  Loading section .rdata, size 0x161c8 lma ffffffff88027f00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8803e0c8
=>  Loading section .data, size 0x5e0 lma ffffffff8803e0e0
=>  Start address ffffffff88000004
=>  Transfer rate: 2045376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 97/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:90  W:0   | mipstx39/jmr3904: dl10.exe
Result: invalid   
Time: 0:00:00.253935 dl10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x79f40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88079f40
=>  Loading section .init, size 0x48 lma ffffffff88079fc0
=>  Loading section .fini, size 0x30 lma ffffffff8807a008
=>  Loading section .ctors, size 0x8 lma ffffffff8807a038
=>  Loading section .dtors, size 0x8 lma ffffffff8807a040
=>  Loading section .rdata, size 0x26308 lma ffffffff8807a050
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a0358
=>  Loading section .data, size 0x1758 lma ffffffff880a0370
=>  Start address ffffffff88000004
=>  Transfer rate: 5297664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 98/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:90  W:0   | mipstx39/jmr3904: dumpbuf01.exe
Result: invalid   
Time: 0:00:00.253088 dumpbuf01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880102b0
=>  Loading section .init, size 0x48 lma ffffffff88010320
=>  Loading section .fini, size 0x30 lma ffffffff88010368
=>  Loading section .ctors, size 0x8 lma ffffffff88010398
=>  Loading section .dtors, size 0x8 lma ffffffff880103a0
=>  Loading section .rdata, size 0x1b1c lma ffffffff880103b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ed0
=>  Loading section .data, size 0x478 lma ffffffff88011ee8
=>  Start address ffffffff88000004
=>  Transfer rate: 596640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 99/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:98  W:0   | mipstx39/jmr3904: exit01.exe
Result: invalid   
Time: 0:00:00.258865 exit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10470 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010470
=>  Loading section .init, size 0x48 lma ffffffff880104e0
=>  Loading section .fini, size 0x30 lma ffffffff88010528
=>  Loading section .ctors, size 0x8 lma ffffffff88010558
=>  Loading section .dtors, size 0x8 lma ffffffff88010560
=>  Loading section .rdata, size 0x1aa8 lma ffffffff88010570
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012018
=>  Loading section .data, size 0x450 lma ffffffff88012030
=>  Start address ffffffff88000004
=>  Transfer rate: 598976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[100/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:98  W:0   | mipstx39/jmr3904: exit02.exe
Result: invalid   
Time: 0:00:00.264087 exit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10170 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010170
=>  Loading section .init, size 0x48 lma ffffffff880101e0
=>  Loading section .fini, size 0x30 lma ffffffff88010228
=>  Loading section .ctors, size 0x8 lma ffffffff88010258
=>  Loading section .dtors, size 0x8 lma ffffffff88010260
=>  Loading section .rdata, size 0x1a61 lma ffffffff88010270
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cd8
=>  Loading section .data, size 0x450 lma ffffffff88011cf0
=>  Start address ffffffff88000004
=>  Transfer rate: 592264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[101/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:98  W:0   | mipstx39/jmr3904: flashdisk01.exe
Result: invalid   
Time: 0:00:00.255015 flashdisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x304b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880304b0
=>  Loading section .init, size 0x48 lma ffffffff88030520
=>  Loading section .fini, size 0x30 lma ffffffff88030568
=>  Loading section .ctors, size 0x8 lma ffffffff88030598
=>  Loading section .dtors, size 0x8 lma ffffffff880305a0
=>  Loading section .rdata, size 0x6300 lma ffffffff880305b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880368b0
=>  Loading section .data, size 0x5fc lma ffffffff880368c8
=>  Start address ffffffff88000004
=>  Transfer rate: 1799648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[102/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:98  W:0   | mipstx39/jmr3904: getentropy01.exe
Result: invalid   
Time: 0:00:00.259640 getentropy01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf8b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f8b0
=>  Loading section .init, size 0x48 lma ffffffff8800f920
=>  Loading section .fini, size 0x30 lma ffffffff8800f968
=>  Loading section .ctors, size 0x8 lma ffffffff8800f998
=>  Loading section .dtors, size 0x8 lma ffffffff8800f9a0
=>  Loading section .rdata, size 0x1a19 lma ffffffff8800f9b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880113d0
=>  Loading section .data, size 0x440 lma ffffffff880113e8
=>  Start address ffffffff88000004
=>  Transfer rate: 573640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[103/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:98  W:0   | mipstx39/jmr3904: heapwalk.exe
Result: invalid   
Time: 0:00:00.259706 heapwalk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e10
=>  Loading section .init, size 0x48 lma ffffffff88010e80
=>  Loading section .fini, size 0x30 lma ffffffff88010ec8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ef8
=>  Loading section .dtors, size 0x8 lma ffffffff88010f00
=>  Loading section .rdata, size 0x2421 lma ffffffff88010f10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013338
=>  Loading section .data, size 0x450 lma ffffffff88013350
=>  Start address ffffffff88000004
=>  Transfer rate: 638088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[104/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:98  W:0   | mipstx39/jmr3904: i2c01.exe
Result: invalid   
Time: 0:00:00.261292 i2c01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x153d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880153d0
=>  Loading section .init, size 0x48 lma ffffffff88015440
=>  Loading section .fini, size 0x30 lma ffffffff88015488
=>  Loading section .ctors, size 0x8 lma ffffffff880154b8
=>  Loading section .dtors, size 0x8 lma ffffffff880154c0
=>  Loading section .rdata, size 0x1fd5 lma ffffffff880154d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880174a8
=>  Loading section .data, size 0x480 lma ffffffff880174c0
=>  Start address ffffffff88000004
=>  Transfer rate: 772520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[105/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:98  W:0   | mipstx39/jmr3904: irqs01.exe
Result: invalid   
Time: 0:00:00.263765 irqs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x170c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff880170c0
=>  Loading section .init, size 0x48 lma ffffffff88017150
=>  Loading section .fini, size 0x30 lma ffffffff88017198
=>  Loading section .ctors, size 0x8 lma ffffffff880171c8
=>  Loading section .dtors, size 0x8 lma ffffffff880171d0
=>  Loading section .rdata, size 0x24d4 lma ffffffff880171e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880196b8
=>  Loading section .data, size 0x4c8 lma ffffffff880196d0
=>  Start address ffffffff88000004
=>  Transfer rate: 842848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[106/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:98  W:0   | mipstx39/jmr3904: libfdt01.exe
Result: invalid   
Time: 0:00:00.255985 libfdt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11970 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011970
=>  Loading section .init, size 0x48 lma ffffffff880119e0
=>  Loading section .fini, size 0x30 lma ffffffff88011a28
=>  Loading section .ctors, size 0x8 lma ffffffff88011a58
=>  Loading section .dtors, size 0x8 lma ffffffff88011a60
=>  Loading section .rdata, size 0x1dd9 lma ffffffff88011a70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013850
=>  Loading section .data, size 0x450 lma ffffffff88013868
=>  Start address ffffffff88000004
=>  Transfer rate: 648520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[107/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:106 W:0   | mipstx39/jmr3904: malloc02.exe
Result: invalid   
Time: 0:00:00.260546 malloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10600 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010600
=>  Loading section .init, size 0x48 lma ffffffff88010670
=>  Loading section .fini, size 0x30 lma ffffffff880106b8
=>  Loading section .ctors, size 0x8 lma ffffffff880106e8
=>  Loading section .dtors, size 0x8 lma ffffffff880106f0
=>  Loading section .rdata, size 0x1e95 lma ffffffff88010700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012598
=>  Loading section .data, size 0x480 lma ffffffff880125b0
=>  Start address ffffffff88000004
=>  Transfer rate: 610600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[108/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:106 W:0   | mipstx39/jmr3904: malloc03.exe
Result: invalid   
Time: 0:00:00.271530 malloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f410
=>  Loading section .init, size 0x48 lma ffffffff8800f480
=>  Loading section .fini, size 0x30 lma ffffffff8800f4c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f4f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f500
=>  Loading section .rdata, size 0x19c5 lma ffffffff8800f510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ed8
=>  Loading section .data, size 0x440 lma ffffffff88010ef0
=>  Start address ffffffff88000004
=>  Transfer rate: 563496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[109/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:106 W:0   | mipstx39/jmr3904: malloc04.exe
Result: invalid   
Time: 0:00:00.252837 malloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b60
=>  Loading section .init, size 0x48 lma ffffffff88010bd0
=>  Loading section .fini, size 0x30 lma ffffffff88010c18
=>  Loading section .ctors, size 0x8 lma ffffffff88010c48
=>  Loading section .dtors, size 0x8 lma ffffffff88010c50
=>  Loading section .rdata, size 0x1a95 lma ffffffff88010c60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126f8
=>  Loading section .data, size 0x450 lma ffffffff88012710
=>  Start address ffffffff88000004
=>  Transfer rate: 613032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[110/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:106 W:0   | mipstx39/jmr3904: malloctest.exe
Result: invalid   
Time: 0:00:00.261816 malloctest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016c40
=>  Loading section .init, size 0x48 lma ffffffff88016cb0
=>  Loading section .fini, size 0x30 lma ffffffff88016cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88016d28
=>  Loading section .dtors, size 0x8 lma ffffffff88016d30
=>  Loading section .rdata, size 0x40b0 lma ffffffff88016d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801adf0
=>  Loading section .data, size 0x628 lma ffffffff8801ae08
=>  Start address ffffffff88000004
=>  Transfer rate: 893248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[111/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:106 W:0   | mipstx39/jmr3904: math.exe
Result: invalid   
Time: 0:00:00.257725 math.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x277c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880277c0
=>  Loading section .init, size 0x48 lma ffffffff88027830
=>  Loading section .fini, size 0x30 lma ffffffff88027878
=>  Loading section .ctors, size 0x8 lma ffffffff880278a8
=>  Loading section .dtors, size 0x8 lma ffffffff880278b0
=>  Loading section .rdata, size 0x3980 lma ffffffff880278c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b240
=>  Loading section .data, size 0x5fc lma ffffffff8802b258
=>  Start address ffffffff88000004
=>  Transfer rate: 1426016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[112/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:106 W:0   | mipstx39/jmr3904: mathf.exe
Result: invalid   
Time: 0:00:00.251579 mathf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23d00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88023d00
=>  Loading section .init, size 0x48 lma ffffffff88023d70
=>  Loading section .fini, size 0x30 lma ffffffff88023db8
=>  Loading section .ctors, size 0x8 lma ffffffff88023de8
=>  Loading section .dtors, size 0x8 lma ffffffff88023df0
=>  Loading section .rdata, size 0x32e8 lma ffffffff88023e00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880270e8
=>  Loading section .data, size 0x5e4 lma ffffffff88027100
=>  Start address ffffffff88000004
=>  Transfer rate: 1292000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[113/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:106 W:0   | mipstx39/jmr3904: mathl.exe
Result: invalid   
Time: 0:00:00.262656 mathl.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17b40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017b40
=>  Loading section .init, size 0x48 lma ffffffff88017bb0
=>  Loading section .fini, size 0x30 lma ffffffff88017bf8
=>  Loading section .ctors, size 0x8 lma ffffffff88017c28
=>  Loading section .dtors, size 0x8 lma ffffffff88017c30
=>  Loading section .rdata, size 0x1fd0 lma ffffffff88017c40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019c10
=>  Loading section .data, size 0x5d4 lma ffffffff88019c28
=>  Start address ffffffff88000004
=>  Transfer rate: 855968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[114/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:106 W:0   | mipstx39/jmr3904: md501.exe
Result: invalid   
Time: 0:00:00.252445 md501.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880111f0
=>  Loading section .init, size 0x48 lma ffffffff88011260
=>  Loading section .fini, size 0x30 lma ffffffff880112a8
=>  Loading section .ctors, size 0x8 lma ffffffff880112d8
=>  Loading section .dtors, size 0x8 lma ffffffff880112e0
=>  Loading section .rdata, size 0x1c89 lma ffffffff880112f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f80
=>  Loading section .data, size 0x490 lma ffffffff88012f98
=>  Start address ffffffff88000004
=>  Transfer rate: 630984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[115/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:114 W:0   | mipstx39/jmr3904: monitor.exe
Result: invalid   
Time: 0:00:00.255971 monitor.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27890 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027890
=>  Loading section .init, size 0x48 lma ffffffff88027900
=>  Loading section .fini, size 0x30 lma ffffffff88027948
=>  Loading section .ctors, size 0x8 lma ffffffff88027978
=>  Loading section .dtors, size 0x8 lma ffffffff88027980
=>  Loading section .rdata, size 0x492c lma ffffffff88027990
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c2c0
=>  Loading section .data, size 0x7f4 lma ffffffff8802c2d8
=>  Start address ffffffff88000004
=>  Transfer rate: 1463808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[116/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:114 W:0   | mipstx39/jmr3904: monitor02.exe
Result: invalid   
Time: 0:00:00.254287 monitor02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x201d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880201d0
=>  Loading section .init, size 0x48 lma ffffffff88020250
=>  Loading section .fini, size 0x30 lma ffffffff88020298
=>  Loading section .ctors, size 0x8 lma ffffffff880202c8
=>  Loading section .dtors, size 0x8 lma ffffffff880202d0
=>  Loading section .rdata, size 0x3748 lma ffffffff880202e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023a28
=>  Loading section .data, size 0x878 lma ffffffff88023a40
=>  Start address ffffffff88000004
=>  Transfer rate: 1185152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[117/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:114 W:0   | mipstx39/jmr3904: mouse01.exe
Result: invalid   
Time: 0:00:00.258035 mouse01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c6e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801c6e0
=>  Loading section .init, size 0x48 lma ffffffff8801c760
=>  Loading section .fini, size 0x30 lma ffffffff8801c7a8
=>  Loading section .ctors, size 0x8 lma ffffffff8801c7d8
=>  Loading section .dtors, size 0x8 lma ffffffff8801c7e0
=>  Loading section .rdata, size 0x28f4 lma ffffffff8801c7f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f0e8
=>  Loading section .data, size 0x680 lma ffffffff8801f100
=>  Start address ffffffff88000004
=>  Transfer rate: 1031072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[118/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:114 W:0   | mipstx39/jmr3904: newlib01.exe
Result: invalid   
Time: 0:00:00.258994 newlib01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x152f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880152f0
=>  Loading section .init, size 0x48 lma ffffffff88015360
=>  Loading section .fini, size 0x30 lma ffffffff880153a8
=>  Loading section .ctors, size 0x8 lma ffffffff880153d8
=>  Loading section .dtors, size 0x8 lma ffffffff880153e0
=>  Loading section .rdata, size 0x1cfc lma ffffffff880153f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880170f0
=>  Loading section .data, size 0x480 lma ffffffff88017108
=>  Start address ffffffff88000004
=>  Transfer rate: 764896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[119/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:114 W:0   | mipstx39/jmr3904: ofw01.exe
Result: invalid   
Time: 0:00:00.260110 ofw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12d40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012d40
=>  Loading section .init, size 0x48 lma ffffffff88012db0
=>  Loading section .fini, size 0x30 lma ffffffff88012df8
=>  Loading section .ctors, size 0x8 lma ffffffff88012e28
=>  Loading section .dtors, size 0x8 lma ffffffff88012e30
=>  Loading section .rdata, size 0x1fed lma ffffffff88012e40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014e30
=>  Loading section .data, size 0x450 lma ffffffff88014e48
=>  Start address ffffffff88000004
=>  Transfer rate: 693352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[120/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:114 W:0   | mipstx39/jmr3904: putenvtest.exe
Result: invalid   
Time: 0:00:00.257324 putenvtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b10
=>  Loading section .init, size 0x48 lma ffffffff88010b80
=>  Loading section .fini, size 0x30 lma ffffffff88010bc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010bf8
=>  Loading section .dtors, size 0x8 lma ffffffff88010c00
=>  Loading section .rdata, size 0x19dd lma ffffffff88010c10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125f0
=>  Loading section .data, size 0x454 lma ffffffff88012608
=>  Start address ffffffff88000004
=>  Transfer rate: 610952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[121/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:114 W:0   | mipstx39/jmr3904: pwdgrp01.exe
Result: invalid   
Time: 0:00:00.261141 pwdgrp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014530
=>  Loading section .init, size 0x48 lma ffffffff880145a0
=>  Loading section .fini, size 0x30 lma ffffffff880145e8
=>  Loading section .ctors, size 0x8 lma ffffffff88014618
=>  Loading section .dtors, size 0x8 lma ffffffff88014620
=>  Loading section .rdata, size 0x1e00 lma ffffffff88014630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016430
=>  Loading section .data, size 0x4d0 lma ffffffff88016448
=>  Start address ffffffff88000004
=>  Transfer rate: 739456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[122/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:114 W:0   | mipstx39/jmr3904: pwdgrp02.exe
Result: invalid   
Time: 0:00:00.254771 pwdgrp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x130e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880130e0
=>  Loading section .init, size 0x48 lma ffffffff88013150
=>  Loading section .fini, size 0x30 lma ffffffff88013198
=>  Loading section .ctors, size 0x8 lma ffffffff880131c8
=>  Loading section .dtors, size 0x8 lma ffffffff880131d0
=>  Loading section .rdata, size 0x1d78 lma ffffffff880131e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014f58
=>  Loading section .data, size 0x468 lma ffffffff88014f70
=>  Start address ffffffff88000004
=>  Transfer rate: 695936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[123/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:122 W:0   | mipstx39/jmr3904: rbheap01.exe
Result: invalid   
Time: 0:00:00.256685 rbheap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11320 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011320
=>  Loading section .init, size 0x48 lma ffffffff88011390
=>  Loading section .fini, size 0x30 lma ffffffff880113d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011408
=>  Loading section .dtors, size 0x8 lma ffffffff88011410
=>  Loading section .rdata, size 0x1cd9 lma ffffffff88011420
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013100
=>  Loading section .data, size 0x450 lma ffffffff88013118
=>  Start address ffffffff88000004
=>  Transfer rate: 633544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[124/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:122 W:0   | mipstx39/jmr3904: rcxx01.exe
Result: invalid   
Time: 0:00:00.260994 rcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9b21c lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x84 lma ffffffff8809b21c
=>  Loading section .init, size 0x48 lma ffffffff8809b2a0
=>  Loading section .fini, size 0x30 lma ffffffff8809b2e8
=>  Loading section .ctors, size 0x44 lma ffffffff8809b318
=>  Loading section .dtors, size 0x8 lma ffffffff8809b35c
=>  Loading section .rdata, size 0xab64 lma ffffffff8809b370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a5ed8
=>  Loading section .rel.dyn, size 0x18 lma ffffffff880a5ef0
=>  Loading section .data, size 0x7e0 lma ffffffff880a5f08
=>  Loading section .sdata, size 0x4 lma ffffffff880a66e8
=>  Start address ffffffff88000004
=>  Transfer rate: 5453536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[125/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:122 W:0   | mipstx39/jmr3904: record01.exe
Result: invalid   
Time: 0:00:00.256780 record01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112b0
=>  Loading section .init, size 0x48 lma ffffffff88011320
=>  Loading section .fini, size 0x30 lma ffffffff88011368
=>  Loading section .ctors, size 0x8 lma ffffffff88011398
=>  Loading section .dtors, size 0x8 lma ffffffff880113a0
=>  Loading section .rdata, size 0x1ec1 lma ffffffff880113b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013278
=>  Loading section .data, size 0x450 lma ffffffff88013290
=>  Start address ffffffff88000004
=>  Transfer rate: 636552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[126/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:122 W:0   | mipstx39/jmr3904: record02.exe
Result: invalid   
Time: 0:00:00.254232 record02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19160 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88019160
=>  Loading section .init, size 0x48 lma ffffffff880191e0
=>  Loading section .fini, size 0x30 lma ffffffff88019228
=>  Loading section .ctors, size 0x8 lma ffffffff88019258
=>  Loading section .dtors, size 0x8 lma ffffffff88019260
=>  Loading section .rdata, size 0x8bf5 lma ffffffff88019270
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021e68
=>  Loading section .data, size 0x488 lma ffffffff88021e80
=>  Start address ffffffff88000004
=>  Transfer rate: 1120232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[127/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:122 W:0   | mipstx39/jmr3904: rtmonuse.exe
Result: invalid   
Time: 0:00:00.260152 rtmonuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x124d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880124d0
=>  Loading section .init, size 0x48 lma ffffffff88012540
=>  Loading section .fini, size 0x30 lma ffffffff88012588
=>  Loading section .ctors, size 0x8 lma ffffffff880125b8
=>  Loading section .dtors, size 0x8 lma ffffffff880125c0
=>  Loading section .rdata, size 0x2324 lma ffffffff880125d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880148f8
=>  Loading section .data, size 0x4c8 lma ffffffff88014910
=>  Start address ffffffff88000004
=>  Transfer rate: 683616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[128/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:122 W:0   | mipstx39/jmr3904: sha.exe
Result: invalid   
Time: 0:00:00.257348 sha.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bae0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801bae0
=>  Loading section .init, size 0x48 lma ffffffff8801bb50
=>  Loading section .fini, size 0x30 lma ffffffff8801bb98
=>  Loading section .ctors, size 0x8 lma ffffffff8801bbc8
=>  Loading section .dtors, size 0x8 lma ffffffff8801bbd0
=>  Loading section .rdata, size 0x1f1d lma ffffffff8801bbe0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801db00
=>  Loading section .data, size 0x440 lma ffffffff8801db18
=>  Start address ffffffff88000004
=>  Transfer rate: 981608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[129/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:122 W:0   | mipstx39/jmr3904: shell01.exe
Result: invalid   
Time: 0:00:00.253949 shell01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x31620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88031620
=>  Loading section .init, size 0x48 lma ffffffff880316a0
=>  Loading section .fini, size 0x30 lma ffffffff880316e8
=>  Loading section .ctors, size 0x8 lma ffffffff88031718
=>  Loading section .dtors, size 0x8 lma ffffffff88031720
=>  Loading section .rdata, size 0x5ec0 lma ffffffff88031730
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880375f0
=>  Loading section .data, size 0x974 lma ffffffff88037608
=>  Start address ffffffff88000004
=>  Transfer rate: 1833888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[130/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:122 W:0   | mipstx39/jmr3904: sparsedisk01.exe
Result: invalid   
Time: 0:00:00.253644 sparsedisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16aa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016aa0
=>  Loading section .init, size 0x48 lma ffffffff88016b10
=>  Loading section .fini, size 0x30 lma ffffffff88016b58
=>  Loading section .ctors, size 0x8 lma ffffffff88016b88
=>  Loading section .dtors, size 0x8 lma ffffffff88016b90
=>  Loading section .rdata, size 0x1d45 lma ffffffff88016ba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880188e8
=>  Loading section .data, size 0x478 lma ffffffff88018900
=>  Start address ffffffff88000004
=>  Transfer rate: 813928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[131/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:130 W:0   | mipstx39/jmr3904: spi01.exe
Result: invalid   
Time: 0:00:00.256459 spi01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ab0
=>  Loading section .init, size 0x48 lma ffffffff88011b20
=>  Loading section .fini, size 0x30 lma ffffffff88011b68
=>  Loading section .ctors, size 0x8 lma ffffffff88011b98
=>  Loading section .dtors, size 0x8 lma ffffffff88011ba0
=>  Loading section .rdata, size 0x1c8d lma ffffffff88011bb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013840
=>  Loading section .data, size 0x490 lma ffffffff88013858
=>  Start address ffffffff88000004
=>  Transfer rate: 648936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[132/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:130 W:0   | mipstx39/jmr3904: stackchk.exe
Result: invalid   
Time: 0:00:00.270738 stackchk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12170 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012170
=>  Loading section .init, size 0x48 lma ffffffff880121e0
=>  Loading section .fini, size 0x30 lma ffffffff88012228
=>  Loading section .ctors, size 0x8 lma ffffffff88012258
=>  Loading section .dtors, size 0x8 lma ffffffff88012260
=>  Loading section .rdata, size 0x22f4 lma ffffffff88012270
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014568
=>  Loading section .data, size 0x5f8 lma ffffffff88014580
=>  Start address ffffffff88000004
=>  Transfer rate: 678752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[133/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:130 W:0   | mipstx39/jmr3904: stackchk01.exe
Result: invalid   
Time: 0:00:00.269798 stackchk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf7a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f7a0
=>  Loading section .init, size 0x48 lma ffffffff8800f810
=>  Loading section .fini, size 0x30 lma ffffffff8800f858
=>  Loading section .ctors, size 0x8 lma ffffffff8800f888
=>  Loading section .dtors, size 0x8 lma ffffffff8800f890
=>  Loading section .rdata, size 0x1aed lma ffffffff8800f8a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011390
=>  Loading section .data, size 0x440 lma ffffffff880113a8
=>  Start address ffffffff88000004
=>  Transfer rate: 573160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[134/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:130 W:0   | mipstx39/jmr3904: stackchk02.exe
Result: invalid   
Time: 0:00:00.258849 stackchk02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f690
=>  Loading section .init, size 0x48 lma ffffffff8800f700
=>  Loading section .fini, size 0x30 lma ffffffff8800f748
=>  Loading section .ctors, size 0x8 lma ffffffff8800f778
=>  Loading section .dtors, size 0x8 lma ffffffff8800f780
=>  Loading section .rdata, size 0x1a39 lma ffffffff8800f790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880111d0
=>  Loading section .data, size 0x440 lma ffffffff880111e8
=>  Start address ffffffff88000004
=>  Transfer rate: 569544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[135/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:130 W:0   | mipstx39/jmr3904: stringto01.exe
Result: invalid   
Time: 0:00:00.266777 stringto01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16ea0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016ea0
=>  Loading section .init, size 0x48 lma ffffffff88016f10
=>  Loading section .fini, size 0x30 lma ffffffff88016f58
=>  Loading section .ctors, size 0x8 lma ffffffff88016f88
=>  Loading section .dtors, size 0x8 lma ffffffff88016f90
=>  Loading section .rdata, size 0x3a28 lma ffffffff88016fa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a9c8
=>  Loading section .data, size 0x5a8 lma ffffffff8801a9e0
=>  Start address ffffffff88000004
=>  Transfer rate: 883712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[136/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:130 W:0   | mipstx39/jmr3904: tar01.exe
Result: invalid   
Time: 0:00:00.270831 tar01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x158a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880158a0
=>  Loading section .init, size 0x48 lma ffffffff88015910
=>  Loading section .fini, size 0x30 lma ffffffff88015958
=>  Loading section .ctors, size 0x8 lma ffffffff88015988
=>  Loading section .dtors, size 0x8 lma ffffffff88015990
=>  Loading section .rdata, size 0x86ac lma ffffffff880159a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e050
=>  Loading section .data, size 0x440 lma ffffffff8801e068
=>  Start address ffffffff88000004
=>  Transfer rate: 992480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[137/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:130 W:0   | mipstx39/jmr3904: tar02.exe
Result: invalid   
Time: 0:00:00.268277 tar02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880113e0
=>  Loading section .init, size 0x48 lma ffffffff88011450
=>  Loading section .fini, size 0x30 lma ffffffff88011498
=>  Loading section .ctors, size 0x8 lma ffffffff880114c8
=>  Loading section .dtors, size 0x8 lma ffffffff880114d0
=>  Loading section .rdata, size 0x52b0 lma ffffffff880114e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016790
=>  Loading section .data, size 0x440 lma ffffffff880167a8
=>  Start address ffffffff88000004
=>  Transfer rate: 745216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[138/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:130 W:0   | mipstx39/jmr3904: tar03.exe
Result: invalid   
Time: 0:00:00.266177 tar03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880114f0
=>  Loading section .init, size 0x48 lma ffffffff88011560
=>  Loading section .fini, size 0x30 lma ffffffff880115a8
=>  Loading section .ctors, size 0x8 lma ffffffff880115d8
=>  Loading section .dtors, size 0x8 lma ffffffff880115e0
=>  Loading section .rdata, size 0x2548 lma ffffffff880115f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b38
=>  Loading section .data, size 0x450 lma ffffffff88013b50
=>  Start address ffffffff88000004
=>  Transfer rate: 654528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[139/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios.exe
Result: invalid   
Time: 0:00:00.256659 termios.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24b40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88024b40
=>  Loading section .init, size 0x48 lma ffffffff88024bb0
=>  Loading section .fini, size 0x30 lma ffffffff88024bf8
=>  Loading section .ctors, size 0x8 lma ffffffff88024c28
=>  Loading section .dtors, size 0x8 lma ffffffff88024c30
=>  Loading section .rdata, size 0x446c lma ffffffff88024c40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880290b0
=>  Loading section .data, size 0x5c8 lma ffffffff880290c8
=>  Start address ffffffff88000004
=>  Transfer rate: 1356832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[140/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios01.exe
Result: invalid   
Time: 0:00:00.257512 termios01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x173a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880173a0
=>  Loading section .init, size 0x48 lma ffffffff88017410
=>  Loading section .fini, size 0x30 lma ffffffff88017458
=>  Loading section .ctors, size 0x8 lma ffffffff88017488
=>  Loading section .dtors, size 0x8 lma ffffffff88017490
=>  Loading section .rdata, size 0x3acc lma ffffffff880174a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801af70
=>  Loading section .data, size 0x508 lma ffffffff8801af88
=>  Start address ffffffff88000004
=>  Transfer rate: 893984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[141/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios02.exe
Result: invalid   
Time: 0:00:00.264601 termios02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13630 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013630
=>  Loading section .init, size 0x48 lma ffffffff880136a0
=>  Loading section .fini, size 0x30 lma ffffffff880136e8
=>  Loading section .ctors, size 0x8 lma ffffffff88013718
=>  Loading section .dtors, size 0x8 lma ffffffff88013720
=>  Loading section .rdata, size 0x1e18 lma ffffffff88013730
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015548
=>  Loading section .data, size 0x440 lma ffffffff88015560
=>  Start address ffffffff88000004
=>  Transfer rate: 707776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[142/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios03.exe
Result: invalid   
Time: 0:00:00.254982 termios03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14630 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014630
=>  Loading section .init, size 0x48 lma ffffffff880146a0
=>  Loading section .fini, size 0x30 lma ffffffff880146e8
=>  Loading section .ctors, size 0x8 lma ffffffff88014718
=>  Loading section .dtors, size 0x8 lma ffffffff88014720
=>  Loading section .rdata, size 0x2204 lma ffffffff88014730
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016938
=>  Loading section .data, size 0x490 lma ffffffff88016950
=>  Start address ffffffff88000004
=>  Transfer rate: 749216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[143/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios04.exe
Result: invalid   
Time: 0:00:00.267615 termios04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14980 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014980
=>  Loading section .init, size 0x48 lma ffffffff88014a00
=>  Loading section .fini, size 0x30 lma ffffffff88014a48
=>  Loading section .ctors, size 0x8 lma ffffffff88014a78
=>  Loading section .dtors, size 0x8 lma ffffffff88014a80
=>  Loading section .rdata, size 0x2140 lma ffffffff88014a90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016bd0
=>  Loading section .data, size 0x4c0 lma ffffffff88016be8
=>  Start address ffffffff88000004
=>  Transfer rate: 754944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[144/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios05.exe
Result: invalid   
Time: 0:00:00.261820 termios05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14d50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014d50
=>  Loading section .init, size 0x48 lma ffffffff88014dd0
=>  Loading section .fini, size 0x30 lma ffffffff88014e18
=>  Loading section .ctors, size 0x8 lma ffffffff88014e48
=>  Loading section .dtors, size 0x8 lma ffffffff88014e50
=>  Loading section .rdata, size 0x21a4 lma ffffffff88014e60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017008
=>  Loading section .data, size 0x4c0 lma ffffffff88017020
=>  Start address ffffffff88000004
=>  Transfer rate: 763552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[145/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios06.exe
Result: invalid   
Time: 0:00:00.251793 termios06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14a40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014a40
=>  Loading section .init, size 0x48 lma ffffffff88014ab0
=>  Loading section .fini, size 0x30 lma ffffffff88014af8
=>  Loading section .ctors, size 0x8 lma ffffffff88014b28
=>  Loading section .dtors, size 0x8 lma ffffffff88014b30
=>  Loading section .rdata, size 0x22f4 lma ffffffff88014b40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016e38
=>  Loading section .data, size 0x4a0 lma ffffffff88016e50
=>  Start address ffffffff88000004
=>  Transfer rate: 759584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[146/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:138 W:0   | mipstx39/jmr3904: termios07.exe
Result: invalid   
Time: 0:00:00.254602 termios07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014ab0
=>  Loading section .init, size 0x48 lma ffffffff88014b30
=>  Loading section .fini, size 0x30 lma ffffffff88014b78
=>  Loading section .ctors, size 0x8 lma ffffffff88014ba8
=>  Loading section .dtors, size 0x8 lma ffffffff88014bb0
=>  Loading section .rdata, size 0x21c8 lma ffffffff88014bc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016d88
=>  Loading section .data, size 0x4c0 lma ffffffff88016da0
=>  Start address ffffffff88000004
=>  Transfer rate: 758464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[147/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios08.exe
Result: invalid   
Time: 0:00:00.271855 termios08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014270
=>  Loading section .init, size 0x48 lma ffffffff880142e0
=>  Loading section .fini, size 0x30 lma ffffffff88014328
=>  Loading section .ctors, size 0x8 lma ffffffff88014358
=>  Loading section .dtors, size 0x8 lma ffffffff88014360
=>  Loading section .rdata, size 0x2130 lma ffffffff88014370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880164a0
=>  Loading section .data, size 0x490 lma ffffffff880164b8
=>  Start address ffffffff88000004
=>  Transfer rate: 739840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[148/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios09.exe
Result: invalid   
Time: 0:00:00.261876 termios09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18d00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018d00
=>  Loading section .init, size 0x48 lma ffffffff88018d70
=>  Loading section .fini, size 0x30 lma ffffffff88018db8
=>  Loading section .ctors, size 0x8 lma ffffffff88018de8
=>  Loading section .dtors, size 0x8 lma ffffffff88018df0
=>  Loading section .rdata, size 0x2334 lma ffffffff88018e00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b138
=>  Loading section .data, size 0x648 lma ffffffff8801b150
=>  Start address ffffffff88000004
=>  Transfer rate: 900192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[149/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios10.exe
Result: invalid   
Time: 0:00:00.264657 termios10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16430 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88016430
=>  Loading section .init, size 0x48 lma ffffffff880164b0
=>  Loading section .fini, size 0x30 lma ffffffff880164f8
=>  Loading section .ctors, size 0x8 lma ffffffff88016528
=>  Loading section .dtors, size 0x8 lma ffffffff88016530
=>  Loading section .rdata, size 0x23b4 lma ffffffff88016540
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880188f8
=>  Loading section .data, size 0x510 lma ffffffff88018910
=>  Start address ffffffff88000004
=>  Transfer rate: 815264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[150/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: termios11.exe
Result: invalid   
Time: 0:00:00.258152 termios11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16b10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88016b10
=>  Loading section .init, size 0x48 lma ffffffff88016b90
=>  Loading section .fini, size 0x30 lma ffffffff88016bd8
=>  Loading section .ctors, size 0x8 lma ffffffff88016c08
=>  Loading section .dtors, size 0x8 lma ffffffff88016c10
=>  Loading section .rdata, size 0x23cc lma ffffffff88016c20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018ff0
=>  Loading section .data, size 0x540 lma ffffffff88019008
=>  Start address ffffffff88000004
=>  Transfer rate: 829920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[151/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: top.exe
Result: invalid   
Time: 0:00:00.256489 top.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ebd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ebd0
=>  Loading section .init, size 0x48 lma ffffffff8801ec40
=>  Loading section .fini, size 0x30 lma ffffffff8801ec88
=>  Loading section .ctors, size 0x8 lma ffffffff8801ecb8
=>  Loading section .dtors, size 0x8 lma ffffffff8801ecc0
=>  Loading section .rdata, size 0x2c18 lma ffffffff8801ecd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880218e8
=>  Loading section .data, size 0x5e4 lma ffffffff88021900
=>  Start address ffffffff88000004
=>  Transfer rate: 1111776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[152/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: ttest01.exe
Result: invalid   
Time: 0:00:00.262524 ttest01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x25230 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xb50 lma ffffffff88025230
=>  Loading section .init, size 0x48 lma ffffffff88025d80
=>  Loading section .fini, size 0x30 lma ffffffff88025dc8
=>  Loading section .ctors, size 0x8 lma ffffffff88025df8
=>  Loading section .dtors, size 0x8 lma ffffffff88025e00
=>  Loading section .rdata, size 0x1c204 lma ffffffff88025e10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88042018
=>  Loading section .data, size 0x1b80 lma ffffffff88042030
=>  Start address ffffffff88000004
=>  Transfer rate: 2219296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[153/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: ttest02.exe
Result: invalid   
Time: 0:00:00.254478 ttest02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17c50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff88017c50
=>  Loading section .init, size 0x48 lma ffffffff88017ce0
=>  Loading section .fini, size 0x30 lma ffffffff88017d28
=>  Loading section .ctors, size 0x8 lma ffffffff88017d58
=>  Loading section .dtors, size 0x8 lma ffffffff88017d60
=>  Loading section .rdata, size 0x25a8 lma ffffffff88017d70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a318
=>  Loading section .data, size 0x5c0 lma ffffffff8801a330
=>  Start address ffffffff88000004
=>  Transfer rate: 870208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[154/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:146 W:0   | mipstx39/jmr3904: tztest.exe
Result: invalid   
Time: 0:00:00.259818 tztest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15da0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015da0
=>  Loading section .init, size 0x48 lma ffffffff88015e10
=>  Loading section .fini, size 0x30 lma ffffffff88015e58
=>  Loading section .ctors, size 0x8 lma ffffffff88015e88
=>  Loading section .dtors, size 0x8 lma ffffffff88015e90
=>  Loading section .rdata, size 0x2498 lma ffffffff88015ea0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018338
=>  Loading section .data, size 0x64c lma ffffffff88018350
=>  Start address ffffffff88000004
=>  Transfer rate: 806048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[155/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: uid01.exe
Result: invalid   
Time: 0:00:00.257230 uid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c4c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801c4c0
=>  Loading section .init, size 0x48 lma ffffffff8801c540
=>  Loading section .fini, size 0x30 lma ffffffff8801c588
=>  Loading section .ctors, size 0x8 lma ffffffff8801c5b8
=>  Loading section .dtors, size 0x8 lma ffffffff8801c5c0
=>  Loading section .rdata, size 0x2854 lma ffffffff8801c5d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ee28
=>  Loading section .data, size 0x680 lma ffffffff8801ee40
=>  Start address ffffffff88000004
=>  Transfer rate: 1025440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[156/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: utf8proc01.exe
Result: invalid   
Time: 0:00:00.259526 utf8proc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c80
=>  Loading section .init, size 0x48 lma ffffffff88011cf0
=>  Loading section .fini, size 0x30 lma ffffffff88011d38
=>  Loading section .ctors, size 0x8 lma ffffffff88011d68
=>  Loading section .dtors, size 0x8 lma ffffffff88011d70
=>  Loading section .rdata, size 0x6cf19 lma ffffffff88011d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8807eca0
=>  Loading section .data, size 0x450 lma ffffffff8807ecb8
=>  Start address ffffffff88000004
=>  Transfer rate: 4163528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[157/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx01.exe
Result: invalid   
Time: 0:00:00.255088 psx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17440 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017440
=>  Loading section .init, size 0x48 lma ffffffff880174b0
=>  Loading section .fini, size 0x30 lma ffffffff880174f8
=>  Loading section .ctors, size 0x8 lma ffffffff88017528
=>  Loading section .dtors, size 0x8 lma ffffffff88017530
=>  Loading section .rdata, size 0x2508 lma ffffffff88017540
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019a48
=>  Loading section .data, size 0x5bc lma ffffffff88019a60
=>  Start address ffffffff88000004
=>  Transfer rate: 852128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[158/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx02.exe
Result: invalid   
Time: 0:00:00.265771 psx02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a390 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a390
=>  Loading section .init, size 0x48 lma ffffffff8801a400
=>  Loading section .fini, size 0x30 lma ffffffff8801a448
=>  Loading section .ctors, size 0x8 lma ffffffff8801a478
=>  Loading section .dtors, size 0x8 lma ffffffff8801a480
=>  Loading section .rdata, size 0x25e0 lma ffffffff8801a490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ca70
=>  Loading section .data, size 0x650 lma ffffffff8801ca88
=>  Start address ffffffff88000004
=>  Transfer rate: 951936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[159/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx03.exe
Result: invalid   
Time: 0:00:00.260157 psx03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a950
=>  Loading section .init, size 0x48 lma ffffffff8801a9c0
=>  Loading section .fini, size 0x30 lma ffffffff8801aa08
=>  Loading section .ctors, size 0x8 lma ffffffff8801aa38
=>  Loading section .dtors, size 0x8 lma ffffffff8801aa40
=>  Loading section .rdata, size 0x26e4 lma ffffffff8801aa50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d138
=>  Loading section .data, size 0x650 lma ffffffff8801d150
=>  Start address ffffffff88000004
=>  Transfer rate: 965792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[160/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx04.exe
Result: invalid   
Time: 0:00:00.260260 psx04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a570 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a570
=>  Loading section .init, size 0x48 lma ffffffff8801a5e0
=>  Loading section .fini, size 0x30 lma ffffffff8801a628
=>  Loading section .ctors, size 0x8 lma ffffffff8801a658
=>  Loading section .dtors, size 0x8 lma ffffffff8801a660
=>  Loading section .rdata, size 0x3808 lma ffffffff8801a670
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801de78
=>  Loading section .data, size 0x67c lma ffffffff8801de90
=>  Start address ffffffff88000004
=>  Transfer rate: 993312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[161/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx05.exe
Result: invalid   
Time: 0:00:00.258899 psx05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bc30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801bc30
=>  Loading section .init, size 0x48 lma ffffffff8801bca0
=>  Loading section .fini, size 0x30 lma ffffffff8801bce8
=>  Loading section .ctors, size 0x8 lma ffffffff8801bd18
=>  Loading section .dtors, size 0x8 lma ffffffff8801bd20
=>  Loading section .rdata, size 0x34b0 lma ffffffff8801bd30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f1e0
=>  Loading section .data, size 0x654 lma ffffffff8801f1f8
=>  Start address ffffffff88000004
=>  Transfer rate: 1032736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[162/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:154 W:0   | mipstx39/jmr3904: psx06.exe
Result: invalid   
Time: 0:00:00.254453 psx06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17aa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017aa0
=>  Loading section .init, size 0x48 lma ffffffff88017b10
=>  Loading section .fini, size 0x30 lma ffffffff88017b58
=>  Loading section .ctors, size 0x8 lma ffffffff88017b88
=>  Loading section .dtors, size 0x8 lma ffffffff88017b90
=>  Loading section .rdata, size 0x23d0 lma ffffffff88017ba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019f70
=>  Loading section .data, size 0x6bc lma ffffffff88019f88
=>  Start address ffffffff88000004
=>  Transfer rate: 864736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[163/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx07.exe
Result: invalid   
Time: 0:00:00.256400 psx07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bf90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801bf90
=>  Loading section .init, size 0x48 lma ffffffff8801c000
=>  Loading section .fini, size 0x30 lma ffffffff8801c048
=>  Loading section .ctors, size 0x8 lma ffffffff8801c078
=>  Loading section .dtors, size 0x8 lma ffffffff8801c080
=>  Loading section .rdata, size 0x4ab8 lma ffffffff8801c090
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020b48
=>  Loading section .data, size 0x654 lma ffffffff88020b60
=>  Start address ffffffff88000004
=>  Transfer rate: 1084768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[164/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx08.exe
Result: invalid   
Time: 0:00:00.471271 psx08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17490 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017490
=>  Loading section .init, size 0x48 lma ffffffff88017500
=>  Loading section .fini, size 0x30 lma ffffffff88017548
=>  Loading section .ctors, size 0x8 lma ffffffff88017578
=>  Loading section .dtors, size 0x8 lma ffffffff88017580
=>  Loading section .rdata, size 0x2458 lma ffffffff88017590
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880199e8
=>  Loading section .data, size 0x654 lma ffffffff88019a00
=>  Start address ffffffff88000004
=>  Transfer rate: 852576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[165/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx09.exe
Result: invalid   
Time: 0:00:00.471509 psx09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ffa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ffa0
=>  Loading section .init, size 0x48 lma ffffffff88020010
=>  Loading section .fini, size 0x30 lma ffffffff88020058
=>  Loading section .ctors, size 0x8 lma ffffffff88020088
=>  Loading section .dtors, size 0x8 lma ffffffff88020090
=>  Loading section .rdata, size 0x329c lma ffffffff880200a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023340
=>  Loading section .data, size 0x648 lma ffffffff88023358
=>  Start address ffffffff88000004
=>  Transfer rate: 1166496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[166/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx10.exe
Result: invalid   
Time: 0:00:00.471068 psx10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ce0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013ce0
=>  Loading section .init, size 0x48 lma ffffffff88013d50
=>  Loading section .fini, size 0x30 lma ffffffff88013d98
=>  Loading section .ctors, size 0x8 lma ffffffff88013dc8
=>  Loading section .dtors, size 0x8 lma ffffffff88013dd0
=>  Loading section .rdata, size 0x2444 lma ffffffff88013de0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016228
=>  Loading section .data, size 0x45c lma ffffffff88016240
=>  Start address ffffffff88000004
=>  Transfer rate: 734336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[167/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx11.exe
Result: invalid   
Time: 0:00:00.482633 psx11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17240 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017240
=>  Loading section .init, size 0x48 lma ffffffff880172b0
=>  Loading section .fini, size 0x30 lma ffffffff880172f8
=>  Loading section .ctors, size 0x8 lma ffffffff88017328
=>  Loading section .dtors, size 0x8 lma ffffffff88017330
=>  Loading section .rdata, size 0x22a4 lma ffffffff88017340
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880195e8
=>  Loading section .data, size 0x648 lma ffffffff88019600
=>  Start address ffffffff88000004
=>  Transfer rate: 844256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[168/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx12.exe
Result: invalid   
Time: 0:00:00.481790 psx12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x178e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880178e0
=>  Loading section .init, size 0x48 lma ffffffff88017950
=>  Loading section .fini, size 0x30 lma ffffffff88017998
=>  Loading section .ctors, size 0x8 lma ffffffff880179c8
=>  Loading section .dtors, size 0x8 lma ffffffff880179d0
=>  Loading section .rdata, size 0x22c0 lma ffffffff880179e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019ca0
=>  Loading section .data, size 0x654 lma ffffffff88019cb8
=>  Start address ffffffff88000004
=>  Transfer rate: 858144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[169/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx13.exe
Result: invalid   
Time: 0:00:00.461699 psx13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17de0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017de0
=>  Loading section .init, size 0x48 lma ffffffff88017e50
=>  Loading section .fini, size 0x30 lma ffffffff88017e98
=>  Loading section .ctors, size 0x8 lma ffffffff88017ec8
=>  Loading section .dtors, size 0x8 lma ffffffff88017ed0
=>  Loading section .rdata, size 0x1c6c lma ffffffff88017ee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019b50
=>  Loading section .data, size 0x450 lma ffffffff88019b68
=>  Start address ffffffff88000004
=>  Transfer rate: 851296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[170/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:162 W:0   | mipstx39/jmr3904: psx14.exe
Result: invalid   
Time: 0:00:00.460081 psx14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880113c0
=>  Loading section .init, size 0x48 lma ffffffff88011430
=>  Loading section .fini, size 0x30 lma ffffffff88011478
=>  Loading section .ctors, size 0x8 lma ffffffff880114a8
=>  Loading section .dtors, size 0x8 lma ffffffff880114b0
=>  Loading section .rdata, size 0x2189 lma ffffffff880114c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013650
=>  Loading section .data, size 0x450 lma ffffffff88013668
=>  Start address ffffffff88000004
=>  Transfer rate: 644424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[171/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psx15.exe
Result: invalid   
Time: 0:00:00.372792 psx15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10450 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010450
=>  Loading section .init, size 0x48 lma ffffffff880104c0
=>  Loading section .fini, size 0x30 lma ffffffff88010508
=>  Loading section .ctors, size 0x8 lma ffffffff88010538
=>  Loading section .dtors, size 0x8 lma ffffffff88010540
=>  Loading section .rdata, size 0x1a11 lma ffffffff88010550
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f68
=>  Loading section .data, size 0x450 lma ffffffff88011f80
=>  Start address ffffffff88000004
=>  Transfer rate: 597512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[172/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psx16.exe
Result: invalid   
Time: 0:00:00.335265 psx16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11a20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011a20
=>  Loading section .init, size 0x48 lma ffffffff88011a90
=>  Loading section .fini, size 0x30 lma ffffffff88011ad8
=>  Loading section .ctors, size 0x8 lma ffffffff88011b08
=>  Loading section .dtors, size 0x8 lma ffffffff88011b10
=>  Loading section .rdata, size 0x1b24 lma ffffffff88011b20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013648
=>  Loading section .data, size 0x45c lma ffffffff88013660
=>  Start address ffffffff88000004
=>  Transfer rate: 644480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[173/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxaio01.exe
Result: invalid   
Time: 0:00:00.311274 psxaio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014c70
=>  Loading section .init, size 0x48 lma ffffffff88014ce0
=>  Loading section .fini, size 0x30 lma ffffffff88014d28
=>  Loading section .ctors, size 0x8 lma ffffffff88014d58
=>  Loading section .dtors, size 0x8 lma ffffffff88014d60
=>  Loading section .rdata, size 0x1ca9 lma ffffffff88014d70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016a20
=>  Loading section .data, size 0x450 lma ffffffff88016a38
=>  Start address ffffffff88000004
=>  Transfer rate: 750536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[174/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxaio02.exe
Result: invalid   
Time: 0:00:00.339180 psxaio02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1abe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801abe0
=>  Loading section .init, size 0x48 lma ffffffff8801ac50
=>  Loading section .fini, size 0x30 lma ffffffff8801ac98
=>  Loading section .ctors, size 0x8 lma ffffffff8801acc8
=>  Loading section .dtors, size 0x8 lma ffffffff8801acd0
=>  Loading section .rdata, size 0x2510 lma ffffffff8801ace0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d1f0
=>  Loading section .data, size 0x5bc lma ffffffff8801d208
=>  Start address ffffffff88000004
=>  Transfer rate: 966112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[175/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxaio03.exe
Result: invalid   
Time: 0:00:00.322716 psxaio03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a8d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a8d0
=>  Loading section .init, size 0x48 lma ffffffff8801a940
=>  Loading section .fini, size 0x30 lma ffffffff8801a988
=>  Loading section .ctors, size 0x8 lma ffffffff8801a9b8
=>  Loading section .dtors, size 0x8 lma ffffffff8801a9c0
=>  Loading section .rdata, size 0x22d4 lma ffffffff8801a9d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cca8
=>  Loading section .data, size 0x5c8 lma ffffffff8801ccc0
=>  Start address ffffffff88000004
=>  Transfer rate: 955360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[176/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxalarm01.exe
Result: invalid   
Time: 0:00:00.335278 psxalarm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013220
=>  Loading section .init, size 0x48 lma ffffffff880132a0
=>  Loading section .fini, size 0x30 lma ffffffff880132e8
=>  Loading section .ctors, size 0x8 lma ffffffff88013318
=>  Loading section .dtors, size 0x8 lma ffffffff88013320
=>  Loading section .rdata, size 0x1d04 lma ffffffff88013330
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015038
=>  Loading section .data, size 0x494 lma ffffffff88015050
=>  Start address ffffffff88000004
=>  Transfer rate: 698048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[177/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxautoinit01.exe
Result: invalid   
Time: 0:00:00.329529 psxautoinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112b0
=>  Loading section .init, size 0x48 lma ffffffff88011320
=>  Loading section .fini, size 0x30 lma ffffffff88011368
=>  Loading section .ctors, size 0x8 lma ffffffff88011398
=>  Loading section .dtors, size 0x8 lma ffffffff880113a0
=>  Loading section .rdata, size 0x2598 lma ffffffff880113b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013948
=>  Loading section .data, size 0x440 lma ffffffff88013960
=>  Start address ffffffff88000004
=>  Transfer rate: 650432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[178/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:170 W:0   | mipstx39/jmr3904: psxautoinit02.exe
Result: invalid   
Time: 0:00:00.326418 psxautoinit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ba0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012ba0
=>  Loading section .init, size 0x48 lma ffffffff88012c10
=>  Loading section .fini, size 0x30 lma ffffffff88012c58
=>  Loading section .ctors, size 0x8 lma ffffffff88012c88
=>  Loading section .dtors, size 0x8 lma ffffffff88012c90
=>  Loading section .rdata, size 0x26c0 lma ffffffff88012ca0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015360
=>  Loading section .data, size 0x450 lma ffffffff88015378
=>  Start address ffffffff88000004
=>  Transfer rate: 704000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[179/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxbarrier01.exe
Result: invalid   
Time: 0:00:00.251552 psxbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12940 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012940
=>  Loading section .init, size 0x48 lma ffffffff880129b0
=>  Loading section .fini, size 0x30 lma ffffffff880129f8
=>  Loading section .ctors, size 0x8 lma ffffffff88012a28
=>  Loading section .dtors, size 0x8 lma ffffffff88012a30
=>  Loading section .rdata, size 0x2190 lma ffffffff88012a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014bd0
=>  Loading section .data, size 0x4cc lma ffffffff88014be8
=>  Start address ffffffff88000004
=>  Transfer rate: 689504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[180/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxcancel.exe
Result: invalid   
Time: 0:00:00.256071 psxcancel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x151b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880151b0
=>  Loading section .init, size 0x48 lma ffffffff88015220
=>  Loading section .fini, size 0x30 lma ffffffff88015268
=>  Loading section .ctors, size 0x8 lma ffffffff88015298
=>  Loading section .dtors, size 0x8 lma ffffffff880152a0
=>  Loading section .rdata, size 0x28e4 lma ffffffff880152b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017b98
=>  Loading section .data, size 0x4c4 lma ffffffff88017bb0
=>  Start address ffffffff88000004
=>  Transfer rate: 787264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[181/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxcancel01.exe
Result: invalid   
Time: 0:00:00.254111 psxcancel01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ee0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ee0
=>  Loading section .init, size 0x48 lma ffffffff88011f50
=>  Loading section .fini, size 0x30 lma ffffffff88011f98
=>  Loading section .ctors, size 0x8 lma ffffffff88011fc8
=>  Loading section .dtors, size 0x8 lma ffffffff88011fd0
=>  Loading section .rdata, size 0x2478 lma ffffffff88011fe0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014458
=>  Loading section .data, size 0x480 lma ffffffff88014470
=>  Start address ffffffff88000004
=>  Transfer rate: 673600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[182/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxchroot01.exe
Result: invalid   
Time: 0:00:00.259759 psxchroot01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ff10
=>  Loading section .init, size 0x48 lma ffffffff8800ff80
=>  Loading section .fini, size 0x30 lma ffffffff8800ffc8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fff8
=>  Loading section .dtors, size 0x8 lma ffffffff88010000
=>  Loading section .rdata, size 0x1b71 lma ffffffff88010010
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b88
=>  Loading section .data, size 0x478 lma ffffffff88011ba0
=>  Start address ffffffff88000004
=>  Transfer rate: 589896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[183/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxclassic01.exe
Result: invalid   
Time: 0:00:00.259583 psxclassic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x139c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880139c0
=>  Loading section .init, size 0x48 lma ffffffff88013a40
=>  Loading section .fini, size 0x30 lma ffffffff88013a88
=>  Loading section .ctors, size 0x8 lma ffffffff88013ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88013ac0
=>  Loading section .rdata, size 0x1e74 lma ffffffff88013ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015948
=>  Loading section .data, size 0x4dc lma ffffffff88015960
=>  Start address ffffffff88000004
=>  Transfer rate: 717184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[184/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxcleanup.exe
Result: invalid   
Time: 0:00:00.258079 psxcleanup.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14550 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014550
=>  Loading section .init, size 0x48 lma ffffffff880145c0
=>  Loading section .fini, size 0x30 lma ffffffff88014608
=>  Loading section .ctors, size 0x8 lma ffffffff88014638
=>  Loading section .dtors, size 0x8 lma ffffffff88014640
=>  Loading section .rdata, size 0x2690 lma ffffffff88014650
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ce0
=>  Loading section .data, size 0x494 lma ffffffff88016cf8
=>  Start address ffffffff88000004
=>  Transfer rate: 756768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[185/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxcleanup01.exe
Result: invalid   
Time: 0:00:00.259564 psxcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11560 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011560
=>  Loading section .init, size 0x48 lma ffffffff880115d0
=>  Loading section .fini, size 0x30 lma ffffffff88011618
=>  Loading section .ctors, size 0x8 lma ffffffff88011648
=>  Loading section .dtors, size 0x8 lma ffffffff88011650
=>  Loading section .rdata, size 0x1b3d lma ffffffff88011660
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131a0
=>  Loading section .data, size 0x4e8 lma ffffffff880131b8
=>  Start address ffffffff88000004
=>  Transfer rate: 636072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[186/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:178 W:0   | mipstx39/jmr3904: psxcleanup02.exe
Result: invalid   
Time: 0:00:00.256674 psxcleanup02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b70
=>  Loading section .init, size 0x48 lma ffffffff88010be0
=>  Loading section .fini, size 0x30 lma ffffffff88010c28
=>  Loading section .ctors, size 0x8 lma ffffffff88010c58
=>  Loading section .dtors, size 0x8 lma ffffffff88010c60
=>  Loading section .rdata, size 0x1ad9 lma ffffffff88010c70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012750
=>  Loading section .data, size 0x4e0 lma ffffffff88012768
=>  Start address ffffffff88000004
=>  Transfer rate: 614856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[187/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:179 W:0   | mipstx39/jmr3904: psxclock.exe
Result: invalid   
Time: 0:00:00.522920 psxclock.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x197f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880197f0
=>  Loading section .init, size 0x48 lma ffffffff88019860
=>  Loading section .fini, size 0x30 lma ffffffff880198a8
=>  Loading section .ctors, size 0x8 lma ffffffff880198d8
=>  Loading section .dtors, size 0x8 lma ffffffff880198e0
=>  Loading section .rdata, size 0x2828 lma ffffffff880198f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c118
=>  Loading section .data, size 0x658 lma ffffffff8801c130
=>  Start address ffffffff88000004
=>  Transfer rate: 932864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[188/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxclock01.exe
Result: invalid   
Time: 0:00:00.259306 psxclock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e20
=>  Loading section .init, size 0x48 lma ffffffff88010e90
=>  Loading section .fini, size 0x30 lma ffffffff88010ed8
=>  Loading section .ctors, size 0x8 lma ffffffff88010f08
=>  Loading section .dtors, size 0x8 lma ffffffff88010f10
=>  Loading section .rdata, size 0x1a15 lma ffffffff88010f20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012938
=>  Loading section .data, size 0x450 lma ffffffff88012950
=>  Start address ffffffff88000004
=>  Transfer rate: 617640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[189/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxclockrealtime01.exe
Result: invalid   
Time: 0:00:00.256550 psxclockrealtime01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16d40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016d40
=>  Loading section .init, size 0x48 lma ffffffff88016db0
=>  Loading section .fini, size 0x30 lma ffffffff88016df8
=>  Loading section .ctors, size 0x8 lma ffffffff88016e28
=>  Loading section .dtors, size 0x8 lma ffffffff88016e30
=>  Loading section .rdata, size 0x26a8 lma ffffffff88016e40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880194e8
=>  Loading section .data, size 0x4b8 lma ffffffff88019500
=>  Start address ffffffff88000004
=>  Transfer rate: 839040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[190/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxconcurrency01.exe
Result: invalid   
Time: 0:00:00.257584 psxconcurrency01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100c0
=>  Loading section .init, size 0x48 lma ffffffff88010130
=>  Loading section .fini, size 0x30 lma ffffffff88010178
=>  Loading section .ctors, size 0x8 lma ffffffff880101a8
=>  Loading section .dtors, size 0x8 lma ffffffff880101b0
=>  Loading section .rdata, size 0x1af1 lma ffffffff880101c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cb8
=>  Loading section .data, size 0x440 lma ffffffff88011cd0
=>  Start address ffffffff88000004
=>  Transfer rate: 591880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[191/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxcond01.exe
Result: invalid   
Time: 0:00:00.306332 psxcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x131d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880131d0
=>  Loading section .init, size 0x48 lma ffffffff88013240
=>  Loading section .fini, size 0x30 lma ffffffff88013288
=>  Loading section .ctors, size 0x8 lma ffffffff880132b8
=>  Loading section .dtors, size 0x8 lma ffffffff880132c0
=>  Loading section .rdata, size 0x2708 lma ffffffff880132d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880159d8
=>  Loading section .data, size 0x45c lma ffffffff880159f0
=>  Start address ffffffff88000004
=>  Transfer rate: 717344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[192/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxcond02.exe
Result: invalid   
Time: 0:00:00.257026 psxcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ad0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ad0
=>  Loading section .init, size 0x48 lma ffffffff88010b40
=>  Loading section .fini, size 0x30 lma ffffffff88010b88
=>  Loading section .ctors, size 0x8 lma ffffffff88010bb8
=>  Loading section .dtors, size 0x8 lma ffffffff88010bc0
=>  Loading section .rdata, size 0x2668 lma ffffffff88010bd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013238
=>  Loading section .data, size 0x440 lma ffffffff88013250
=>  Start address ffffffff88000004
=>  Transfer rate: 635968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[193/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxconfig01.exe
Result: invalid   
Time: 0:00:00.256625 psxconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x154a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xb0 lma ffffffff880154a0
=>  Loading section .init, size 0x48 lma ffffffff88015550
=>  Loading section .fini, size 0x30 lma ffffffff88015598
=>  Loading section .ctors, size 0x8 lma ffffffff880155c8
=>  Loading section .dtors, size 0x8 lma ffffffff880155d0
=>  Loading section .rdata, size 0x2768 lma ffffffff880155e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017d48
=>  Loading section .data, size 0x738 lma ffffffff88017d60
=>  Start address ffffffff88000004
=>  Transfer rate: 795776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[194/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:186 W:0   | mipstx39/jmr3904: psxconfstr.exe
Result: invalid   
Time: 0:00:00.262008 psxconfstr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18ae0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88018ae0
=>  Loading section .init, size 0x48 lma ffffffff88018b60
=>  Loading section .fini, size 0x30 lma ffffffff88018ba8
=>  Loading section .ctors, size 0x8 lma ffffffff88018bd8
=>  Loading section .dtors, size 0x8 lma ffffffff88018be0
=>  Loading section .rdata, size 0x2404 lma ffffffff88018bf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aff8
=>  Loading section .data, size 0x480 lma ffffffff8801b010
=>  Start address ffffffff88000004
=>  Transfer rate: 893984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[195/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:187 W:0   | mipstx39/jmr3904: psxdevctl01.exe
Result: invalid   
Time: 0:00:00.511362 psxdevctl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x138f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880138f0
=>  Loading section .init, size 0x48 lma ffffffff88013960
=>  Loading section .fini, size 0x30 lma ffffffff880139a8
=>  Loading section .ctors, size 0x8 lma ffffffff880139d8
=>  Loading section .dtors, size 0x8 lma ffffffff880139e0
=>  Loading section .rdata, size 0x1dc4 lma ffffffff880139f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880157b8
=>  Loading section .data, size 0x440 lma ffffffff880157d0
=>  Start address ffffffff88000004
=>  Transfer rate: 712736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[196/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxeintr_join.exe
Result: invalid   
Time: 0:00:00.256845 psxeintr_join.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12280 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012280
=>  Loading section .init, size 0x48 lma ffffffff880122f0
=>  Loading section .fini, size 0x30 lma ffffffff88012338
=>  Loading section .ctors, size 0x8 lma ffffffff88012368
=>  Loading section .dtors, size 0x8 lma ffffffff88012370
=>  Loading section .rdata, size 0x1c94 lma ffffffff88012380
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014018
=>  Loading section .data, size 0x450 lma ffffffff88014030
=>  Start address ffffffff88000004
=>  Transfer rate: 664480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[197/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxenosys.exe
Result: invalid   
Time: 0:00:00.254702 psxenosys.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11dc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011dc0
=>  Loading section .init, size 0x48 lma ffffffff88011e30
=>  Loading section .fini, size 0x30 lma ffffffff88011e78
=>  Loading section .ctors, size 0x8 lma ffffffff88011ea8
=>  Loading section .dtors, size 0x8 lma ffffffff88011eb0
=>  Loading section .rdata, size 0x26b0 lma ffffffff88011ec0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014570
=>  Loading section .data, size 0x454 lma ffffffff88014588
=>  Start address ffffffff88000004
=>  Transfer rate: 675488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[198/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxfatal01.exe
Result: invalid   
Time: 0:00:00.253858 psxfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880111d0
=>  Loading section .init, size 0x48 lma ffffffff88011240
=>  Loading section .fini, size 0x30 lma ffffffff88011288
=>  Loading section .ctors, size 0x8 lma ffffffff880112b8
=>  Loading section .dtors, size 0x8 lma ffffffff880112c0
=>  Loading section .rdata, size 0x2778 lma ffffffff880112d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a48
=>  Loading section .data, size 0x450 lma ffffffff88013a60
=>  Start address ffffffff88000004
=>  Transfer rate: 652608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[199/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxfatal02.exe
Result: invalid   
Time: 0:00:00.254264 psxfatal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11120 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011120
=>  Loading section .init, size 0x48 lma ffffffff88011190
=>  Loading section .fini, size 0x30 lma ffffffff880111d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011208
=>  Loading section .dtors, size 0x8 lma ffffffff88011210
=>  Loading section .rdata, size 0x278c lma ffffffff88011220
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139b0
=>  Loading section .data, size 0x450 lma ffffffff880139c8
=>  Start address ffffffff88000004
=>  Transfer rate: 651360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[200/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxfchx01.exe
Result: invalid   
Time: 0:00:00.256920 psxfchx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011400
=>  Loading section .init, size 0x48 lma ffffffff88011470
=>  Loading section .fini, size 0x30 lma ffffffff880114b8
=>  Loading section .ctors, size 0x8 lma ffffffff880114e8
=>  Loading section .dtors, size 0x8 lma ffffffff880114f0
=>  Loading section .rdata, size 0x1f9d lma ffffffff88011500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134a0
=>  Loading section .data, size 0x450 lma ffffffff880134b8
=>  Start address ffffffff88000004
=>  Transfer rate: 641000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[201/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxfenv01.exe
Result: invalid   
Time: 0:00:00.261317 psxfenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12f20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012f20
=>  Loading section .init, size 0x48 lma ffffffff88012f90
=>  Loading section .fini, size 0x30 lma ffffffff88012fd8
=>  Loading section .ctors, size 0x8 lma ffffffff88013008
=>  Loading section .dtors, size 0x8 lma ffffffff88013010
=>  Loading section .rdata, size 0x1cb4 lma ffffffff88013020
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014cd8
=>  Loading section .data, size 0x440 lma ffffffff88014cf0
=>  Start address ffffffff88000004
=>  Transfer rate: 690464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[202/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:194 W:0   | mipstx39/jmr3904: psxfile01.exe
Result: invalid   
Time: 0:00:00.258986 psxfile01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23ff0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88023ff0
=>  Loading section .init, size 0x48 lma ffffffff88024060
=>  Loading section .fini, size 0x30 lma ffffffff880240a8
=>  Loading section .ctors, size 0x8 lma ffffffff880240d8
=>  Loading section .dtors, size 0x8 lma ffffffff880240e0
=>  Loading section .rdata, size 0x4478 lma ffffffff880240f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028568
=>  Loading section .data, size 0x648 lma ffffffff88028580
=>  Start address ffffffff88000004
=>  Transfer rate: 1334784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[203/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:195 W:0   | mipstx39/jmr3904: psxfile02.exe
Result: invalid   
Time: 0:00:00.251872 psxfile02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011d20
=>  Loading section .init, size 0x48 lma ffffffff88011d90
=>  Loading section .fini, size 0x30 lma ffffffff88011dd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011e08
=>  Loading section .dtors, size 0x8 lma ffffffff88011e10
=>  Loading section .rdata, size 0x24bc lma ffffffff88011e20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880142e0
=>  Loading section .data, size 0x450 lma ffffffff880142f8
=>  Start address ffffffff88000004
=>  Transfer rate: 670176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[204/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:203 W:0   | mipstx39/jmr3904: psxfilelock01.exe
Result: invalid   
Time: 0:00:00.274226 psxfilelock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x122e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880122e0
=>  Loading section .init, size 0x48 lma ffffffff88012350
=>  Loading section .fini, size 0x30 lma ffffffff88012398
=>  Loading section .ctors, size 0x8 lma ffffffff880123c8
=>  Loading section .dtors, size 0x8 lma ffffffff880123d0
=>  Loading section .rdata, size 0x1a58 lma ffffffff880123e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e38
=>  Loading section .data, size 0x450 lma ffffffff88013e50
=>  Start address ffffffff88000004
=>  Transfer rate: 660672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[205/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:203 W:0   | mipstx39/jmr3904: psxftw01.exe
Result: invalid   
Time: 0:00:00.308594 psxftw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b970 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801b970
=>  Loading section .init, size 0x48 lma ffffffff8801b9f0
=>  Loading section .fini, size 0x30 lma ffffffff8801ba38
=>  Loading section .ctors, size 0x8 lma ffffffff8801ba68
=>  Loading section .dtors, size 0x8 lma ffffffff8801ba70
=>  Loading section .rdata, size 0x42fc lma ffffffff8801ba80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801fd80
=>  Loading section .data, size 0x4f0 lma ffffffff8801fd98
=>  Start address ffffffff88000004
=>  Transfer rate: 1053664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[206/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:203 W:0   | mipstx39/jmr3904: psxgetattrnp01.exe
Result: invalid   
Time: 0:00:00.256923 psxgetattrnp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012220
=>  Loading section .init, size 0x48 lma ffffffff88012290
=>  Loading section .fini, size 0x30 lma ffffffff880122d8
=>  Loading section .ctors, size 0x8 lma ffffffff88012308
=>  Loading section .dtors, size 0x8 lma ffffffff88012310
=>  Loading section .rdata, size 0x1f74 lma ffffffff88012320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014298
=>  Loading section .data, size 0x440 lma ffffffff880142b0
=>  Start address ffffffff88000004
=>  Transfer rate: 669472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[207/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:203 W:0   | mipstx39/jmr3904: psxgetrusage01.exe
Result: invalid   
Time: 0:00:00.260779 psxgetrusage01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010520
=>  Loading section .init, size 0x48 lma ffffffff88010590
=>  Loading section .fini, size 0x30 lma ffffffff880105d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010608
=>  Loading section .dtors, size 0x8 lma ffffffff88010610
=>  Loading section .rdata, size 0x1b91 lma ffffffff88010620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121b8
=>  Loading section .data, size 0x450 lma ffffffff880121d0
=>  Start address ffffffff88000004
=>  Transfer rate: 602248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[208/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:203 W:0   | mipstx39/jmr3904: psxglobalcon01.exe
Result: invalid   
Time: 0:00:00.263130 psxglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10010 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010010
=>  Loading section .init, size 0x48 lma ffffffff88010080
=>  Loading section .fini, size 0x30 lma ffffffff880100c8
=>  Loading section .ctors, size 0xc lma ffffffff880100f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010104
=>  Loading section .rdata, size 0x1a45 lma ffffffff88010110
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b58
=>  Loading section .data, size 0x440 lma ffffffff88011b70
=>  Start address ffffffff88000004
=>  Transfer rate: 589128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[209/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:203 W:0   | mipstx39/jmr3904: psxglobalcon02.exe
Result: invalid   
Time: 0:00:00.258635 psxglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10510 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010510
=>  Loading section .init, size 0x48 lma ffffffff88010580
=>  Loading section .fini, size 0x30 lma ffffffff880105c8
=>  Loading section .ctors, size 0xc lma ffffffff880105f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010604
=>  Loading section .rdata, size 0x1a6d lma ffffffff88010610
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012080
=>  Loading section .data, size 0x4b0 lma ffffffff88012098
=>  Start address ffffffff88000004
=>  Transfer rate: 600584 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[210/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:203 W:0   | mipstx39/jmr3904: psxid01.exe
Result: invalid   
Time: 0:00:00.255545 psxid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13a20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013a20
=>  Loading section .init, size 0x48 lma ffffffff88013a90
=>  Loading section .fini, size 0x30 lma ffffffff88013ad8
=>  Loading section .ctors, size 0x8 lma ffffffff88013b08
=>  Loading section .dtors, size 0x8 lma ffffffff88013b10
=>  Loading section .rdata, size 0x1d54 lma ffffffff88013b20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015878
=>  Loading section .data, size 0x478 lma ffffffff88015890
=>  Start address ffffffff88000004
=>  Transfer rate: 714720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[211/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:203 W:0   | mipstx39/jmr3904: psximfs01.exe
Result: invalid   
Time: 0:00:00.254121 psximfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112d0
=>  Loading section .init, size 0x48 lma ffffffff88011340
=>  Loading section .fini, size 0x30 lma ffffffff88011388
=>  Loading section .ctors, size 0x8 lma ffffffff880113b8
=>  Loading section .dtors, size 0x8 lma ffffffff880113c0
=>  Loading section .rdata, size 0x2520 lma ffffffff880113d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138f0
=>  Loading section .data, size 0x450 lma ffffffff88013908
=>  Start address ffffffff88000004
=>  Transfer rate: 649856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[212/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:211 W:0   | mipstx39/jmr3904: psximfs02.exe
Result: invalid   
Time: 0:00:00.259443 psximfs02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19540 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019540
=>  Loading section .init, size 0x48 lma ffffffff880195b0
=>  Loading section .fini, size 0x30 lma ffffffff880195f8
=>  Loading section .ctors, size 0x8 lma ffffffff88019628
=>  Loading section .dtors, size 0x8 lma ffffffff88019630
=>  Loading section .rdata, size 0x28a0 lma ffffffff88019640
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bee0
=>  Loading section .data, size 0x5e4 lma ffffffff8801bef8
=>  Start address ffffffff88000004
=>  Transfer rate: 927392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[213/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:211 W:0   | mipstx39/jmr3904: psxinttypes01.exe
Result: invalid   
Time: 0:00:00.262943 psxinttypes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x145f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880145f0
=>  Loading section .init, size 0x48 lma ffffffff88014660
=>  Loading section .fini, size 0x30 lma ffffffff880146a8
=>  Loading section .ctors, size 0x8 lma ffffffff880146d8
=>  Loading section .dtors, size 0x8 lma ffffffff880146e0
=>  Loading section .rdata, size 0x2134 lma ffffffff880146f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016828
=>  Loading section .data, size 0x5a8 lma ffffffff88016840
=>  Start address ffffffff88000004
=>  Transfer rate: 749280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[214/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:211 W:0   | mipstx39/jmr3904: psxitimer.exe
Result: invalid   
Time: 0:00:00.262347 psxitimer.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011070
=>  Loading section .init, size 0x48 lma ffffffff880110e0
=>  Loading section .fini, size 0x30 lma ffffffff88011128
=>  Loading section .ctors, size 0x8 lma ffffffff88011158
=>  Loading section .dtors, size 0x8 lma ffffffff88011160
=>  Loading section .rdata, size 0x1c15 lma ffffffff88011170
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d88
=>  Loading section .data, size 0x450 lma ffffffff88012da0
=>  Start address ffffffff88000004
=>  Transfer rate: 626472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[215/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:211 W:0   | mipstx39/jmr3904: psxkey01.exe
Result: invalid   
Time: 0:00:00.258881 psxkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fa10
=>  Loading section .init, size 0x48 lma ffffffff8800fa80
=>  Loading section .fini, size 0x30 lma ffffffff8800fac8
=>  Loading section .ctors, size 0x8 lma ffffffff8800faf8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fb00
=>  Loading section .rdata, size 0x1cfd lma ffffffff8800fb10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011810
=>  Loading section .data, size 0x4a8 lma ffffffff88011828
=>  Start address ffffffff88000004
=>  Transfer rate: 583208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[216/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:211 W:0   | mipstx39/jmr3904: psxkey02.exe
Result: invalid   
Time: 0:00:00.263905 psxkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10610 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010610
=>  Loading section .init, size 0x48 lma ffffffff88010680
=>  Loading section .fini, size 0x30 lma ffffffff880106c8
=>  Loading section .ctors, size 0x8 lma ffffffff880106f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010700
=>  Loading section .rdata, size 0x1b15 lma ffffffff88010710
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012228
=>  Loading section .data, size 0x4a8 lma ffffffff88012240
=>  Start address ffffffff88000004
=>  Transfer rate: 603880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[217/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:211 W:0   | mipstx39/jmr3904: psxkey03.exe
Result: invalid   
Time: 0:00:00.254792 psxkey03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11640 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011640
=>  Loading section .init, size 0x48 lma ffffffff880116b0
=>  Loading section .fini, size 0x30 lma ffffffff880116f8
=>  Loading section .ctors, size 0x8 lma ffffffff88011728
=>  Loading section .dtors, size 0x8 lma ffffffff88011730
=>  Loading section .rdata, size 0x1b9d lma ffffffff88011740
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880132e0
=>  Loading section .data, size 0x4c8 lma ffffffff880132f8
=>  Start address ffffffff88000004
=>  Transfer rate: 638376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[218/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:211 W:0   | mipstx39/jmr3904: psxkey04.exe
Result: invalid   
Time: 0:00:00.260372 psxkey04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11700 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011700
=>  Loading section .init, size 0x48 lma ffffffff88011770
=>  Loading section .fini, size 0x30 lma ffffffff880117b8
=>  Loading section .ctors, size 0x8 lma ffffffff880117e8
=>  Loading section .dtors, size 0x8 lma ffffffff880117f0
=>  Loading section .rdata, size 0x1b9d lma ffffffff88011800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880133a0
=>  Loading section .data, size 0x4d0 lma ffffffff880133b8
=>  Start address ffffffff88000004
=>  Transfer rate: 639976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[219/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:211 W:0   | mipstx39/jmr3904: psxkey05.exe
Result: invalid   
Time: 0:00:00.264268 psxkey05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfed0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fed0
=>  Loading section .init, size 0x48 lma ffffffff8800ff40
=>  Loading section .fini, size 0x30 lma ffffffff8800ff88
=>  Loading section .ctors, size 0x8 lma ffffffff8800ffb8
=>  Loading section .dtors, size 0x8 lma ffffffff8800ffc0
=>  Loading section .rdata, size 0x1b21 lma ffffffff8800ffd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011af8
=>  Loading section .data, size 0x4a8 lma ffffffff88011b10
=>  Start address ffffffff88000004
=>  Transfer rate: 589128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[220/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:219 W:0   | mipstx39/jmr3904: psxkey06.exe
Result: invalid   
Time: 0:00:00.257407 psxkey06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x122f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880122f0
=>  Loading section .init, size 0x48 lma ffffffff88012360
=>  Loading section .fini, size 0x30 lma ffffffff880123a8
=>  Loading section .ctors, size 0x8 lma ffffffff880123d8
=>  Loading section .dtors, size 0x8 lma ffffffff880123e0
=>  Loading section .rdata, size 0x1e4d lma ffffffff880123f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014240
=>  Loading section .data, size 0x4d8 lma ffffffff88014258
=>  Start address ffffffff88000004
=>  Transfer rate: 669992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[221/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:219 W:0   | mipstx39/jmr3904: psxkey07.exe
Result: invalid   
Time: 0:00:00.340070 psxkey07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x133b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880133b0
=>  Loading section .init, size 0x48 lma ffffffff88013420
=>  Loading section .fini, size 0x30 lma ffffffff88013468
=>  Loading section .ctors, size 0x8 lma ffffffff88013498
=>  Loading section .dtors, size 0x8 lma ffffffff880134a0
=>  Loading section .rdata, size 0x1d14 lma ffffffff880134b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880151c8
=>  Loading section .data, size 0x4c8 lma ffffffff880151e0
=>  Start address ffffffff88000004
=>  Transfer rate: 701664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[222/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:219 W:0   | mipstx39/jmr3904: psxkey08.exe
Result: invalid   
Time: 0:00:00.335382 psxkey08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c50
=>  Loading section .init, size 0x48 lma ffffffff88011cc0
=>  Loading section .fini, size 0x30 lma ffffffff88011d08
=>  Loading section .ctors, size 0x8 lma ffffffff88011d38
=>  Loading section .dtors, size 0x8 lma ffffffff88011d40
=>  Loading section .rdata, size 0x1cd4 lma ffffffff88011d50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a28
=>  Loading section .data, size 0x4d8 lma ffffffff88013a40
=>  Start address ffffffff88000004
=>  Transfer rate: 653408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[223/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:219 W:0   | mipstx39/jmr3904: psxkey09.exe
Result: invalid   
Time: 0:00:00.338517 psxkey09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011530
=>  Loading section .init, size 0x48 lma ffffffff880115a0
=>  Loading section .fini, size 0x30 lma ffffffff880115e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011618
=>  Loading section .dtors, size 0x8 lma ffffffff88011620
=>  Loading section .rdata, size 0x1b45 lma ffffffff88011630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013178
=>  Loading section .data, size 0x4c8 lma ffffffff88013190
=>  Start address ffffffff88000004
=>  Transfer rate: 635496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[224/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:219 W:0   | mipstx39/jmr3904: psxkey10.exe
Result: invalid   
Time: 0:00:00.257070 psxkey10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011520
=>  Loading section .init, size 0x48 lma ffffffff88011590
=>  Loading section .fini, size 0x30 lma ffffffff880115d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011608
=>  Loading section .dtors, size 0x8 lma ffffffff88011610
=>  Loading section .rdata, size 0x1b55 lma ffffffff88011620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013178
=>  Loading section .data, size 0x4c8 lma ffffffff88013190
=>  Start address ffffffff88000004
=>  Transfer rate: 635496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[225/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:219 W:0   | mipstx39/jmr3904: psxmmap01.exe
Result: invalid   
Time: 0:00:00.337339 psxmmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ac20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801ac20
=>  Loading section .init, size 0x48 lma ffffffff8801aca0
=>  Loading section .fini, size 0x30 lma ffffffff8801ace8
=>  Loading section .ctors, size 0x8 lma ffffffff8801ad18
=>  Loading section .dtors, size 0x8 lma ffffffff8801ad20
=>  Loading section .rdata, size 0x25f0 lma ffffffff8801ad30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d320
=>  Loading section .data, size 0x624 lma ffffffff8801d338
=>  Start address ffffffff88000004
=>  Transfer rate: 969376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[226/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:219 W:0   | mipstx39/jmr3904: psxmount.exe
Result: invalid   
Time: 0:00:00.337030 psxmount.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12a30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012a30
=>  Loading section .init, size 0x48 lma ffffffff88012aa0
=>  Loading section .fini, size 0x30 lma ffffffff88012ae8
=>  Loading section .ctors, size 0x8 lma ffffffff88012b18
=>  Loading section .dtors, size 0x8 lma ffffffff88012b20
=>  Loading section .rdata, size 0x2ccc lma ffffffff88012b30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015800
=>  Loading section .data, size 0x510 lma ffffffff88015818
=>  Start address ffffffff88000004
=>  Transfer rate: 714976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[227/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:219 W:0   | mipstx39/jmr3904: psxmsgq01.exe
Result: invalid   
Time: 0:00:00.334693 psxmsgq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26a80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88026a80
=>  Loading section .init, size 0x48 lma ffffffff88026b00
=>  Loading section .fini, size 0x30 lma ffffffff88026b48
=>  Loading section .ctors, size 0x8 lma ffffffff88026b78
=>  Loading section .dtors, size 0x8 lma ffffffff88026b80
=>  Loading section .rdata, size 0x4774 lma ffffffff88026b90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b308
=>  Loading section .data, size 0x890 lma ffffffff8802b320
=>  Start address ffffffff88000004
=>  Transfer rate: 1432864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[228/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:227 W:0   | mipstx39/jmr3904: psxmsgq02.exe
Result: invalid   
Time: 0:00:00.259705 psxmsgq02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x171a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880171a0
=>  Loading section .init, size 0x48 lma ffffffff88017210
=>  Loading section .fini, size 0x30 lma ffffffff88017258
=>  Loading section .ctors, size 0x8 lma ffffffff88017288
=>  Loading section .dtors, size 0x8 lma ffffffff88017290
=>  Loading section .rdata, size 0x2b5c lma ffffffff880172a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019e00
=>  Loading section .data, size 0x678 lma ffffffff88019e18
=>  Start address ffffffff88000004
=>  Transfer rate: 861216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[229/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:227 W:0   | mipstx39/jmr3904: psxmsgq03.exe
Result: invalid   
Time: 0:00:00.261589 psxmsgq03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x140b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880140b0
=>  Loading section .init, size 0x48 lma ffffffff88014130
=>  Loading section .fini, size 0x30 lma ffffffff88014178
=>  Loading section .ctors, size 0x8 lma ffffffff880141a8
=>  Loading section .dtors, size 0x8 lma ffffffff880141b0
=>  Loading section .rdata, size 0x2930 lma ffffffff880141c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016af0
=>  Loading section .data, size 0x4bc lma ffffffff88016b08
=>  Start address ffffffff88000004
=>  Transfer rate: 753120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[230/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:227 W:0   | mipstx39/jmr3904: psxmsgq04.exe
Result: invalid   
Time: 0:00:00.265510 psxmsgq04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013220
=>  Loading section .init, size 0x48 lma ffffffff88013290
=>  Loading section .fini, size 0x30 lma ffffffff880132d8
=>  Loading section .ctors, size 0x8 lma ffffffff88013308
=>  Loading section .dtors, size 0x8 lma ffffffff88013310
=>  Loading section .rdata, size 0x259c lma ffffffff88013320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880158c0
=>  Loading section .data, size 0x480 lma ffffffff880158d8
=>  Start address ffffffff88000004
=>  Transfer rate: 715360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[231/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:227 W:0   | mipstx39/jmr3904: psxmutexattr01.exe
Result: invalid   
Time: 0:00:00.262316 psxmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10380 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010380
=>  Loading section .init, size 0x48 lma ffffffff880103f0
=>  Loading section .fini, size 0x30 lma ffffffff88010438
=>  Loading section .ctors, size 0x8 lma ffffffff88010468
=>  Loading section .dtors, size 0x8 lma ffffffff88010470
=>  Loading section .rdata, size 0x1d09 lma ffffffff88010480
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012190
=>  Loading section .data, size 0x478 lma ffffffff880121a8
=>  Start address ffffffff88000004
=>  Transfer rate: 602248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[232/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:227 W:0   | mipstx39/jmr3904: psxndbm01.exe
Result: invalid   
Time: 0:00:00.254908 psxndbm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x192c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880192c0
=>  Loading section .init, size 0x48 lma ffffffff88019330
=>  Loading section .fini, size 0x30 lma ffffffff88019378
=>  Loading section .ctors, size 0x8 lma ffffffff880193a8
=>  Loading section .dtors, size 0x8 lma ffffffff880193b0
=>  Loading section .rdata, size 0x248c lma ffffffff880193c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b850
=>  Loading section .data, size 0x450 lma ffffffff8801b868
=>  Start address ffffffff88000004
=>  Transfer rate: 910688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[233/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:227 W:0   | mipstx39/jmr3904: psxobj01.exe
Result: invalid   
Time: 0:00:00.255957 psxobj01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfbb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fbb0
=>  Loading section .init, size 0x48 lma ffffffff8800fc20
=>  Loading section .fini, size 0x30 lma ffffffff8800fc68
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc98
=>  Loading section .dtors, size 0x8 lma ffffffff8800fca0
=>  Loading section .rdata, size 0x1b69 lma ffffffff8800fcb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011820
=>  Loading section .data, size 0x470 lma ffffffff88011838
=>  Start address ffffffff88000004
=>  Transfer rate: 582856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[234/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:227 W:0   | mipstx39/jmr3904: psxonce01.exe
Result: invalid   
Time: 0:00:00.259610 psxonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x101b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880101b0
=>  Loading section .init, size 0x48 lma ffffffff88010220
=>  Loading section .fini, size 0x30 lma ffffffff88010268
=>  Loading section .ctors, size 0x8 lma ffffffff88010298
=>  Loading section .dtors, size 0x8 lma ffffffff880102a0
=>  Loading section .rdata, size 0x1ba9 lma ffffffff880102b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e60
=>  Loading section .data, size 0x468 lma ffffffff88011e78
=>  Start address ffffffff88000004
=>  Transfer rate: 595592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[235/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:227 W:0   | mipstx39/jmr3904: psxpasswd01.exe
Result: invalid   
Time: 0:00:00.255872 psxpasswd01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14180 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014180
=>  Loading section .init, size 0x48 lma ffffffff880141f0
=>  Loading section .fini, size 0x30 lma ffffffff88014238
=>  Loading section .ctors, size 0x8 lma ffffffff88014268
=>  Loading section .dtors, size 0x8 lma ffffffff88014270
=>  Loading section .rdata, size 0x1fb0 lma ffffffff88014280
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016230
=>  Loading section .data, size 0x4e0 lma ffffffff88016248
=>  Start address ffffffff88000004
=>  Transfer rate: 735488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[236/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:235 W:0   | mipstx39/jmr3904: psxpasswd02.exe
Result: invalid   
Time: 0:00:00.283443 psxpasswd02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e250 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e250
=>  Loading section .init, size 0x48 lma ffffffff8801e2c0
=>  Loading section .fini, size 0x30 lma ffffffff8801e308
=>  Loading section .ctors, size 0x8 lma ffffffff8801e338
=>  Loading section .dtors, size 0x8 lma ffffffff8801e340
=>  Loading section .rdata, size 0x2788 lma ffffffff8801e350
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020ad8
=>  Loading section .data, size 0x64c lma ffffffff88020af0
=>  Start address ffffffff88000004
=>  Transfer rate: 1083808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[237/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:235 W:0   | mipstx39/jmr3904: psxpipe01.exe
Result: invalid   
Time: 0:00:00.277555 psxpipe01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18ae0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018ae0
=>  Loading section .init, size 0x48 lma ffffffff88018b50
=>  Loading section .fini, size 0x30 lma ffffffff88018b98
=>  Loading section .ctors, size 0x8 lma ffffffff88018bc8
=>  Loading section .dtors, size 0x8 lma ffffffff88018bd0
=>  Loading section .rdata, size 0x2350 lma ffffffff88018be0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801af30
=>  Loading section .data, size 0x5e4 lma ffffffff8801af48
=>  Start address ffffffff88000004
=>  Transfer rate: 895264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[238/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:235 W:0   | mipstx39/jmr3904: psxrdwrv.exe
Result: invalid   
Time: 0:00:00.273962 psxrdwrv.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13a30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013a30
=>  Loading section .init, size 0x48 lma ffffffff88013aa0
=>  Loading section .fini, size 0x30 lma ffffffff88013ae8
=>  Loading section .ctors, size 0x8 lma ffffffff88013b18
=>  Loading section .dtors, size 0x8 lma ffffffff88013b20
=>  Loading section .rdata, size 0x288c lma ffffffff88013b30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880163c0
=>  Loading section .data, size 0x450 lma ffffffff880163d8
=>  Start address ffffffff88000004
=>  Transfer rate: 737504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[239/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:235 W:0   | mipstx39/jmr3904: psxreaddir.exe
Result: invalid   
Time: 0:00:00.297797 psxreaddir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x126a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880126a0
=>  Loading section .init, size 0x48 lma ffffffff88012710
=>  Loading section .fini, size 0x30 lma ffffffff88012758
=>  Loading section .ctors, size 0x8 lma ffffffff88012788
=>  Loading section .dtors, size 0x8 lma ffffffff88012790
=>  Loading section .rdata, size 0x257d lma ffffffff880127a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d20
=>  Loading section .data, size 0x520 lma ffffffff88014d38
=>  Start address ffffffff88000004
=>  Transfer rate: 692840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[240/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:235 W:0   | mipstx39/jmr3904: psxrwlock01.exe
Result: invalid   
Time: 0:00:00.278276 psxrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14e70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014e70
=>  Loading section .init, size 0x48 lma ffffffff88014ee0
=>  Loading section .fini, size 0x30 lma ffffffff88014f28
=>  Loading section .ctors, size 0x8 lma ffffffff88014f58
=>  Loading section .dtors, size 0x8 lma ffffffff88014f60
=>  Loading section .rdata, size 0x3044 lma ffffffff88014f70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017fb8
=>  Loading section .data, size 0x4cc lma ffffffff88017fd0
=>  Start address ffffffff88000004
=>  Transfer rate: 795776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[241/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:235 W:0   | mipstx39/jmr3904: psxsem01.exe
Result: invalid   
Time: 0:00:00.268880 psxsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ca10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ca10
=>  Loading section .init, size 0x48 lma ffffffff8801ca80
=>  Loading section .fini, size 0x30 lma ffffffff8801cac8
=>  Loading section .ctors, size 0x8 lma ffffffff8801caf8
=>  Loading section .dtors, size 0x8 lma ffffffff8801cb00
=>  Loading section .rdata, size 0x3570 lma ffffffff8801cb10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020080
=>  Loading section .data, size 0x5ec lma ffffffff88020098
=>  Start address ffffffff88000004
=>  Transfer rate: 1061856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[242/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:235 W:0   | mipstx39/jmr3904: psxshm01.exe
Result: invalid   
Time: 0:00:00.268452 psxshm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12a60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012a60
=>  Loading section .init, size 0x48 lma ffffffff88012ad0
=>  Loading section .fini, size 0x30 lma ffffffff88012b18
=>  Loading section .ctors, size 0x8 lma ffffffff88012b48
=>  Loading section .dtors, size 0x8 lma ffffffff88012b50
=>  Loading section .rdata, size 0x248c lma ffffffff88012b60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ff0
=>  Loading section .data, size 0x488 lma ffffffff88015008
=>  Start address ffffffff88000004
=>  Transfer rate: 697376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[243/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:235 W:0   | mipstx39/jmr3904: psxshm02.exe
Result: invalid   
Time: 0:00:00.253102 psxshm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12d40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012d40
=>  Loading section .init, size 0x48 lma ffffffff88012db0
=>  Loading section .fini, size 0x30 lma ffffffff88012df8
=>  Loading section .ctors, size 0x8 lma ffffffff88012e28
=>  Loading section .dtors, size 0x8 lma ffffffff88012e30
=>  Loading section .rdata, size 0x248c lma ffffffff88012e40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880152d0
=>  Loading section .data, size 0x488 lma ffffffff880152e8
=>  Start address ffffffff88000004
=>  Transfer rate: 703264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[244/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:243 W:0   | mipstx39/jmr3904: psxsignal01.exe
Result: invalid   
Time: 0:00:00.259827 psxsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x188c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880188c0
=>  Loading section .init, size 0x48 lma ffffffff88018940
=>  Loading section .fini, size 0x30 lma ffffffff88018988
=>  Loading section .ctors, size 0x8 lma ffffffff880189b8
=>  Loading section .dtors, size 0x8 lma ffffffff880189c0
=>  Loading section .rdata, size 0x2500 lma ffffffff880189d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aed0
=>  Loading section .data, size 0x68c lma ffffffff8801aee8
=>  Start address ffffffff88000004
=>  Transfer rate: 895840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[245/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:243 W:0   | mipstx39/jmr3904: psxsignal02.exe
Result: invalid   
Time: 0:00:00.261393 psxsignal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x132c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880132c0
=>  Loading section .init, size 0x48 lma ffffffff88013330
=>  Loading section .fini, size 0x30 lma ffffffff88013378
=>  Loading section .ctors, size 0x8 lma ffffffff880133a8
=>  Loading section .dtors, size 0x8 lma ffffffff880133b0
=>  Loading section .rdata, size 0x1d04 lma ffffffff880133c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150c8
=>  Loading section .data, size 0x4e0 lma ffffffff880150e0
=>  Start address ffffffff88000004
=>  Transfer rate: 699808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[246/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:243 W:0   | mipstx39/jmr3904: psxsignal03.exe
Result: invalid   
Time: 0:00:00.263466 psxsignal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013210
=>  Loading section .init, size 0x48 lma ffffffff88013280
=>  Loading section .fini, size 0x30 lma ffffffff880132c8
=>  Loading section .ctors, size 0x8 lma ffffffff880132f8
=>  Loading section .dtors, size 0x8 lma ffffffff88013300
=>  Loading section .rdata, size 0x1e84 lma ffffffff88013310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015198
=>  Loading section .data, size 0x468 lma ffffffff880151b0
=>  Start address ffffffff88000004
=>  Transfer rate: 700512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[247/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:243 W:0   | mipstx39/jmr3904: psxsignal04.exe
Result: invalid   
Time: 0:00:00.257460 psxsignal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013210
=>  Loading section .init, size 0x48 lma ffffffff88013280
=>  Loading section .fini, size 0x30 lma ffffffff880132c8
=>  Loading section .ctors, size 0x8 lma ffffffff880132f8
=>  Loading section .dtors, size 0x8 lma ffffffff88013300
=>  Loading section .rdata, size 0x1e9c lma ffffffff88013310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880151b0
=>  Loading section .data, size 0x468 lma ffffffff880151c8
=>  Start address ffffffff88000004
=>  Transfer rate: 700704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[248/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:243 W:0   | mipstx39/jmr3904: psxsignal05.exe
Result: invalid   
Time: 0:00:00.258235 psxsignal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11320 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011320
=>  Loading section .init, size 0x48 lma ffffffff88011390
=>  Loading section .fini, size 0x30 lma ffffffff880113d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011408
=>  Loading section .dtors, size 0x8 lma ffffffff88011410
=>  Loading section .rdata, size 0x1c58 lma ffffffff88011420
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013078
=>  Loading section .data, size 0x450 lma ffffffff88013090
=>  Start address ffffffff88000004
=>  Transfer rate: 632512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[249/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:243 W:0   | mipstx39/jmr3904: psxsignal06.exe
Result: invalid   
Time: 0:00:00.254234 psxsignal06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13380 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013380
=>  Loading section .init, size 0x48 lma ffffffff880133f0
=>  Loading section .fini, size 0x30 lma ffffffff88013438
=>  Loading section .ctors, size 0x8 lma ffffffff88013468
=>  Loading section .dtors, size 0x8 lma ffffffff88013470
=>  Loading section .rdata, size 0x1d2c lma ffffffff88013480
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880151b0
=>  Loading section .data, size 0x45c lma ffffffff880151c8
=>  Start address ffffffff88000004
=>  Transfer rate: 700608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[250/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:243 W:0   | mipstx39/jmr3904: psxsignal07.exe
Result: invalid   
Time: 0:00:00.256199 psxsignal07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15f40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88015f40
=>  Loading section .init, size 0x48 lma ffffffff88015fc0
=>  Loading section .fini, size 0x30 lma ffffffff88016008
=>  Loading section .ctors, size 0x8 lma ffffffff88016038
=>  Loading section .dtors, size 0x8 lma ffffffff88016040
=>  Loading section .rdata, size 0x1e84 lma ffffffff88016050
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017ed8
=>  Loading section .data, size 0x4d4 lma ffffffff88017ef0
=>  Start address ffffffff88000004
=>  Transfer rate: 794048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[251/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:243 W:0   | mipstx39/jmr3904: psxsignal08.exe
Result: invalid   
Time: 0:00:00.255513 psxsignal08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15710 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015710
=>  Loading section .init, size 0x48 lma ffffffff88015780
=>  Loading section .fini, size 0x30 lma ffffffff880157c8
=>  Loading section .ctors, size 0x8 lma ffffffff880157f8
=>  Loading section .dtors, size 0x8 lma ffffffff88015800
=>  Loading section .rdata, size 0x21fc lma ffffffff88015810
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017a10
=>  Loading section .data, size 0x45c lma ffffffff88017a28
=>  Start address ffffffff88000004
=>  Transfer rate: 783296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[252/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:251 W:0   | mipstx39/jmr3904: psxspin01.exe
Result: invalid   
Time: 0:00:00.266467 psxspin01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10720 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010720
=>  Loading section .init, size 0x48 lma ffffffff88010790
=>  Loading section .fini, size 0x30 lma ffffffff880107d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010808
=>  Loading section .dtors, size 0x8 lma ffffffff88010810
=>  Loading section .rdata, size 0x1c30 lma ffffffff88010820
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012450
=>  Loading section .data, size 0x450 lma ffffffff88012468
=>  Start address ffffffff88000004
=>  Transfer rate: 607616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[253/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:251 W:0   | mipstx39/jmr3904: psxstack01.exe
Result: invalid   
Time: 0:00:00.260544 psxstack01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11880 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011880
=>  Loading section .init, size 0x48 lma ffffffff880118f0
=>  Loading section .fini, size 0x30 lma ffffffff88011938
=>  Loading section .ctors, size 0x8 lma ffffffff88011968
=>  Loading section .dtors, size 0x8 lma ffffffff88011970
=>  Loading section .rdata, size 0x1b61 lma ffffffff88011980
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134e8
=>  Loading section .data, size 0x460 lma ffffffff88013500
=>  Start address ffffffff88000004
=>  Transfer rate: 641672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[254/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:251 W:0   | mipstx39/jmr3904: psxstack02.exe
Result: invalid   
Time: 0:00:00.255474 psxstack02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11860 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011860
=>  Loading section .init, size 0x48 lma ffffffff880118d0
=>  Loading section .fini, size 0x30 lma ffffffff88011918
=>  Loading section .ctors, size 0x8 lma ffffffff88011948
=>  Loading section .dtors, size 0x8 lma ffffffff88011950
=>  Loading section .rdata, size 0x1b61 lma ffffffff88011960
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134c8
=>  Loading section .data, size 0x460 lma ffffffff880134e0
=>  Start address ffffffff88000004
=>  Transfer rate: 641416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[255/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:251 W:0   | mipstx39/jmr3904: psxstat.exe
Result: invalid   
Time: 0:00:00.258734 psxstat.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20a00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88020a00
=>  Loading section .init, size 0x48 lma ffffffff88020a70
=>  Loading section .fini, size 0x30 lma ffffffff88020ab8
=>  Loading section .ctors, size 0x8 lma ffffffff88020ae8
=>  Loading section .dtors, size 0x8 lma ffffffff88020af0
=>  Loading section .rdata, size 0x41cc lma ffffffff88020b00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024cd0
=>  Loading section .data, size 0x7a0 lma ffffffff88024ce8
=>  Start address ffffffff88000004
=>  Transfer rate: 1221600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[256/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:251 W:0   | mipstx39/jmr3904: psxstrsignal01.exe
Result: invalid   
Time: 0:00:00.277074 psxstrsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012c30
=>  Loading section .init, size 0x48 lma ffffffff88012ca0
=>  Loading section .fini, size 0x30 lma ffffffff88012ce8
=>  Loading section .ctors, size 0x8 lma ffffffff88012d18
=>  Loading section .dtors, size 0x8 lma ffffffff88012d20
=>  Loading section .rdata, size 0x20b0 lma ffffffff88012d30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014de0
=>  Loading section .data, size 0x6ac lma ffffffff88014df8
=>  Start address ffffffff88000004
=>  Transfer rate: 697568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[257/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:251 W:0   | mipstx39/jmr3904: psxsysconf.exe
Result: invalid   
Time: 0:00:00.259912 psxsysconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880113b0
=>  Loading section .init, size 0x48 lma ffffffff88011420
=>  Loading section .fini, size 0x30 lma ffffffff88011468
=>  Loading section .ctors, size 0x8 lma ffffffff88011498
=>  Loading section .dtors, size 0x8 lma ffffffff880114a0
=>  Loading section .rdata, size 0x25f4 lma ffffffff880114b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013aa8
=>  Loading section .data, size 0x450 lma ffffffff88013ac0
=>  Start address ffffffff88000004
=>  Transfer rate: 653344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[258/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:251 W:0   | mipstx39/jmr3904: psxthreadname01.exe
Result: invalid   
Time: 0:00:00.261187 psxthreadname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10510 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010510
=>  Loading section .init, size 0x48 lma ffffffff88010580
=>  Loading section .fini, size 0x30 lma ffffffff880105c8
=>  Loading section .ctors, size 0x8 lma ffffffff880105f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010600
=>  Loading section .rdata, size 0x1ae5 lma ffffffff88010610
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120f8
=>  Loading section .data, size 0x450 lma ffffffff88012110
=>  Start address ffffffff88000004
=>  Transfer rate: 600744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[259/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:251 W:0   | mipstx39/jmr3904: psxtime.exe
Result: invalid   
Time: 0:00:00.252567 psxtime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17f00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017f00
=>  Loading section .init, size 0x48 lma ffffffff88017f70
=>  Loading section .fini, size 0x30 lma ffffffff88017fb8
=>  Loading section .ctors, size 0x8 lma ffffffff88017fe8
=>  Loading section .dtors, size 0x8 lma ffffffff88017ff0
=>  Loading section .rdata, size 0x252c lma ffffffff88018000
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a530
=>  Loading section .data, size 0x730 lma ffffffff8801a548
=>  Start address ffffffff88000004
=>  Transfer rate: 877408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[260/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:259 W:0   | mipstx39/jmr3904: psxtimer01.exe
Result: invalid   
Time: 0:00:00.256298 psxtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22ed0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88022ed0
=>  Loading section .init, size 0x48 lma ffffffff88022f50
=>  Loading section .fini, size 0x30 lma ffffffff88022f98
=>  Loading section .ctors, size 0x8 lma ffffffff88022fc8
=>  Loading section .dtors, size 0x8 lma ffffffff88022fd0
=>  Loading section .rdata, size 0x3580 lma ffffffff88022fe0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026560
=>  Loading section .data, size 0x66c lma ffffffff88026578
=>  Start address ffffffff88000004
=>  Transfer rate: 1269472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[261/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:259 W:0   | mipstx39/jmr3904: psxtimer02.exe
Result: invalid   
Time: 0:00:00.252484 psxtimer02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x137f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880137f0
=>  Loading section .init, size 0x48 lma ffffffff88013870
=>  Loading section .fini, size 0x30 lma ffffffff880138b8
=>  Loading section .ctors, size 0x8 lma ffffffff880138e8
=>  Loading section .dtors, size 0x8 lma ffffffff880138f0
=>  Loading section .rdata, size 0x2a38 lma ffffffff88013900
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016338
=>  Loading section .data, size 0x480 lma ffffffff88016350
=>  Start address ffffffff88000004
=>  Transfer rate: 736832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[262/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:259 W:0   | mipstx39/jmr3904: psxtimes01.exe
Result: invalid   
Time: 0:00:00.259350 psxtimes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x104e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880104e0
=>  Loading section .init, size 0x48 lma ffffffff88010550
=>  Loading section .fini, size 0x30 lma ffffffff88010598
=>  Loading section .ctors, size 0x8 lma ffffffff880105c8
=>  Loading section .dtors, size 0x8 lma ffffffff880105d0
=>  Loading section .rdata, size 0x1b45 lma ffffffff880105e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012128
=>  Loading section .data, size 0x450 lma ffffffff88012140
=>  Start address ffffffff88000004
=>  Transfer rate: 601128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[263/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:259 W:0   | mipstx39/jmr3904: psxualarm.exe
Result: invalid   
Time: 0:00:00.259108 psxualarm.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18600 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018600
=>  Loading section .init, size 0x48 lma ffffffff88018670
=>  Loading section .fini, size 0x30 lma ffffffff880186b8
=>  Loading section .ctors, size 0x8 lma ffffffff880186e8
=>  Loading section .dtors, size 0x8 lma ffffffff880186f0
=>  Loading section .rdata, size 0x2368 lma ffffffff88018700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801aa68
=>  Loading section .data, size 0x684 lma ffffffff8801aa80
=>  Start address ffffffff88000004
=>  Transfer rate: 886752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[264/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:259 W:0   | mipstx39/jmr3904: psxusleep.exe
Result: invalid   
Time: 0:00:00.261026 psxusleep.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x185b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880185b0
=>  Loading section .init, size 0x48 lma ffffffff88018620
=>  Loading section .fini, size 0x30 lma ffffffff88018668
=>  Loading section .ctors, size 0x8 lma ffffffff88018698
=>  Loading section .dtors, size 0x8 lma ffffffff880186a0
=>  Loading section .rdata, size 0x229c lma ffffffff880186b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a950
=>  Loading section .data, size 0x654 lma ffffffff8801a968
=>  Start address ffffffff88000004
=>  Transfer rate: 884096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[265/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:259 W:0   | mipstx39/jmr3904: psxtmbarrier01.exe
Result: invalid   
Time: 0:00:00.262481 psxtmbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10200 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010200
=>  Loading section .init, size 0x48 lma ffffffff88010270
=>  Loading section .fini, size 0x30 lma ffffffff880102b8
=>  Loading section .ctors, size 0x8 lma ffffffff880102e8
=>  Loading section .dtors, size 0x8 lma ffffffff880102f0
=>  Loading section .rdata, size 0x1a75 lma ffffffff88010300
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d78
=>  Loading section .data, size 0x440 lma ffffffff88011d90
=>  Start address ffffffff88000004
=>  Transfer rate: 593448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[266/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:259 W:0   | mipstx39/jmr3904: psxtmbarrier02.exe
Result: invalid   
Time: 0:00:00.259795 psxtmbarrier02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x104a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880104a0
=>  Loading section .init, size 0x48 lma ffffffff88010510
=>  Loading section .fini, size 0x30 lma ffffffff88010558
=>  Loading section .ctors, size 0x8 lma ffffffff88010588
=>  Loading section .dtors, size 0x8 lma ffffffff88010590
=>  Loading section .rdata, size 0x1a79 lma ffffffff880105a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012020
=>  Loading section .data, size 0x440 lma ffffffff88012038
=>  Start address ffffffff88000004
=>  Transfer rate: 598856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[267/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:259 W:0   | mipstx39/jmr3904: psxtmbarrier03.exe
Result: invalid   
Time: 0:00:00.252929 psxtmbarrier03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103d0
=>  Loading section .init, size 0x48 lma ffffffff88010440
=>  Loading section .fini, size 0x30 lma ffffffff88010488
=>  Loading section .ctors, size 0x8 lma ffffffff880104b8
=>  Loading section .dtors, size 0x8 lma ffffffff880104c0
=>  Loading section .rdata, size 0x1aa1 lma ffffffff880104d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f78
=>  Loading section .data, size 0x440 lma ffffffff88011f90
=>  Start address ffffffff88000004
=>  Transfer rate: 597512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[268/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:267 W:0   | mipstx39/jmr3904: psxtmbarrier04.exe
Result: invalid   
Time: 0:00:00.279827 psxtmbarrier04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107e0
=>  Loading section .init, size 0x48 lma ffffffff88010850
=>  Loading section .fini, size 0x30 lma ffffffff88010898
=>  Loading section .ctors, size 0x8 lma ffffffff880108c8
=>  Loading section .dtors, size 0x8 lma ffffffff880108d0
=>  Loading section .rdata, size 0x1a71 lma ffffffff880108e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012358
=>  Loading section .data, size 0x440 lma ffffffff88012370
=>  Start address ffffffff88000004
=>  Transfer rate: 605448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[269/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:267 W:0   | mipstx39/jmr3904: psxtmbarrierattr01.exe
Result: invalid   
Time: 0:00:00.526821 psxtmbarrierattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010220
=>  Loading section .init, size 0x48 lma ffffffff88010290
=>  Loading section .fini, size 0x30 lma ffffffff880102d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010308
=>  Loading section .dtors, size 0x8 lma ffffffff88010310
=>  Loading section .rdata, size 0x1afd lma ffffffff88010320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e20
=>  Loading section .data, size 0x440 lma ffffffff88011e38
=>  Start address ffffffff88000004
=>  Transfer rate: 594792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[270/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:267 W:0   | mipstx39/jmr3904: psxtmcleanup01.exe
Result: invalid   
Time: 0:00:00.280258 psxtmcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010220
=>  Loading section .init, size 0x48 lma ffffffff88010290
=>  Loading section .fini, size 0x30 lma ffffffff880102d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010308
=>  Loading section .dtors, size 0x8 lma ffffffff88010310
=>  Loading section .rdata, size 0x1a75 lma ffffffff88010320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d98
=>  Loading section .data, size 0x478 lma ffffffff88011db0
=>  Start address ffffffff88000004
=>  Transfer rate: 594152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[271/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:267 W:0   | mipstx39/jmr3904: psxtmclocknanosleep01.exe
Result: invalid   
Time: 0:00:00.281153 psxtmclocknanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b70
=>  Loading section .init, size 0x48 lma ffffffff88010be0
=>  Loading section .fini, size 0x30 lma ffffffff88010c28
=>  Loading section .ctors, size 0x8 lma ffffffff88010c58
=>  Loading section .dtors, size 0x8 lma ffffffff88010c60
=>  Loading section .rdata, size 0x1a1d lma ffffffff88010c70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012690
=>  Loading section .data, size 0x450 lma ffffffff880126a8
=>  Start address ffffffff88000004
=>  Transfer rate: 612200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[272/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:267 W:0   | mipstx39/jmr3904: psxtmclocknanosleep02.exe
Result: invalid   
Time: 0:00:00.270929 psxtmclocknanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c80
=>  Loading section .init, size 0x48 lma ffffffff88010cf0
=>  Loading section .fini, size 0x30 lma ffffffff88010d38
=>  Loading section .ctors, size 0x8 lma ffffffff88010d68
=>  Loading section .dtors, size 0x8 lma ffffffff88010d70
=>  Loading section .rdata, size 0x1a71 lma ffffffff88010d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127f8
=>  Loading section .data, size 0x448 lma ffffffff88012810
=>  Start address ffffffff88000004
=>  Transfer rate: 614984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[273/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:267 W:0   | mipstx39/jmr3904: psxtmclocknanosleep03.exe
Result: invalid   
Time: 0:00:00.260304 psxtmclocknanosleep03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c80
=>  Loading section .init, size 0x48 lma ffffffff88010cf0
=>  Loading section .fini, size 0x30 lma ffffffff88010d38
=>  Loading section .ctors, size 0x8 lma ffffffff88010d68
=>  Loading section .dtors, size 0x8 lma ffffffff88010d70
=>  Loading section .rdata, size 0x1a71 lma ffffffff88010d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127f8
=>  Loading section .data, size 0x448 lma ffffffff88012810
=>  Start address ffffffff88000004
=>  Transfer rate: 614984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[274/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:267 W:0   | mipstx39/jmr3904: psxtmcond01.exe
Result: invalid   
Time: 0:00:00.263143 psxtmcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880102f0
=>  Loading section .init, size 0x48 lma ffffffff88010360
=>  Loading section .fini, size 0x30 lma ffffffff880103a8
=>  Loading section .ctors, size 0x8 lma ffffffff880103d8
=>  Loading section .dtors, size 0x8 lma ffffffff880103e0
=>  Loading section .rdata, size 0x1a85 lma ffffffff880103f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e78
=>  Loading section .data, size 0x440 lma ffffffff88011e90
=>  Start address ffffffff88000004
=>  Transfer rate: 595496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[275/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:267 W:0   | mipstx39/jmr3904: psxtmcond02.exe
Result: invalid   
Time: 0:00:00.255243 psxtmcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010580
=>  Loading section .init, size 0x48 lma ffffffff880105f0
=>  Loading section .fini, size 0x30 lma ffffffff88010638
=>  Loading section .ctors, size 0x8 lma ffffffff88010668
=>  Loading section .dtors, size 0x8 lma ffffffff88010670
=>  Loading section .rdata, size 0x1a7d lma ffffffff88010680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012100
=>  Loading section .data, size 0x440 lma ffffffff88012118
=>  Start address ffffffff88000004
=>  Transfer rate: 600680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[276/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:275 W:0   | mipstx39/jmr3904: psxtmcond03.exe
Result: invalid   
Time: 0:00:00.254437 psxtmcond03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119d0
=>  Loading section .init, size 0x48 lma ffffffff88011a40
=>  Loading section .fini, size 0x30 lma ffffffff88011a88
=>  Loading section .ctors, size 0x8 lma ffffffff88011ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88011ac0
=>  Loading section .rdata, size 0x1aa9 lma ffffffff88011ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013580
=>  Loading section .data, size 0x440 lma ffffffff88013598
=>  Start address ffffffff88000004
=>  Transfer rate: 642632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[277/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:275 W:0   | mipstx39/jmr3904: psxtmcond04.exe
Result: invalid   
Time: 0:00:00.259289 psxtmcond04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119b0
=>  Loading section .init, size 0x48 lma ffffffff88011a20
=>  Loading section .fini, size 0x30 lma ffffffff88011a68
=>  Loading section .ctors, size 0x8 lma ffffffff88011a98
=>  Loading section .dtors, size 0x8 lma ffffffff88011aa0
=>  Loading section .rdata, size 0x1aa1 lma ffffffff88011ab0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013558
=>  Loading section .data, size 0x440 lma ffffffff88013570
=>  Start address ffffffff88000004
=>  Transfer rate: 642312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[278/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:275 W:0   | mipstx39/jmr3904: psxtmcond05.exe
Result: invalid   
Time: 0:00:00.259635 psxtmcond05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010580
=>  Loading section .init, size 0x48 lma ffffffff880105f0
=>  Loading section .fini, size 0x30 lma ffffffff88010638
=>  Loading section .ctors, size 0x8 lma ffffffff88010668
=>  Loading section .dtors, size 0x8 lma ffffffff88010670
=>  Loading section .rdata, size 0x1a85 lma ffffffff88010680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012108
=>  Loading section .data, size 0x440 lma ffffffff88012120
=>  Start address ffffffff88000004
=>  Transfer rate: 600744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[279/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:275 W:0   | mipstx39/jmr3904: psxtmcond06.exe
Result: invalid   
Time: 0:00:00.257389 psxtmcond06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b20
=>  Loading section .init, size 0x48 lma ffffffff88011b90
=>  Loading section .fini, size 0x30 lma ffffffff88011bd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011c08
=>  Loading section .dtors, size 0x8 lma ffffffff88011c10
=>  Loading section .rdata, size 0x1ab1 lma ffffffff88011c20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136d8
=>  Loading section .data, size 0x440 lma ffffffff880136f0
=>  Start address ffffffff88000004
=>  Transfer rate: 645384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[280/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:275 W:0   | mipstx39/jmr3904: psxtmcond07.exe
Result: invalid   
Time: 0:00:00.258595 psxtmcond07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x116b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880116b0
=>  Loading section .init, size 0x48 lma ffffffff88011720
=>  Loading section .fini, size 0x30 lma ffffffff88011768
=>  Loading section .ctors, size 0x8 lma ffffffff88011798
=>  Loading section .dtors, size 0x8 lma ffffffff880117a0
=>  Loading section .rdata, size 0x1ab1 lma ffffffff880117b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013268
=>  Loading section .data, size 0x440 lma ffffffff88013280
=>  Start address ffffffff88000004
=>  Transfer rate: 636296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[281/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:275 W:0   | mipstx39/jmr3904: psxtmcond08.exe
Result: invalid   
Time: 0:00:00.257145 psxtmcond08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880113a0
=>  Loading section .init, size 0x48 lma ffffffff88011410
=>  Loading section .fini, size 0x30 lma ffffffff88011458
=>  Loading section .ctors, size 0x8 lma ffffffff88011488
=>  Loading section .dtors, size 0x8 lma ffffffff88011490
=>  Loading section .rdata, size 0x1aa1 lma ffffffff880114a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f48
=>  Loading section .data, size 0x440 lma ffffffff88012f60
=>  Start address ffffffff88000004
=>  Transfer rate: 629896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[282/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:275 W:0   | mipstx39/jmr3904: psxtmcond09.exe
Result: invalid   
Time: 0:00:00.251104 psxtmcond09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880113e0
=>  Loading section .init, size 0x48 lma ffffffff88011450
=>  Loading section .fini, size 0x30 lma ffffffff88011498
=>  Loading section .ctors, size 0x8 lma ffffffff880114c8
=>  Loading section .dtors, size 0x8 lma ffffffff880114d0
=>  Loading section .rdata, size 0x1ab1 lma ffffffff880114e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f98
=>  Loading section .data, size 0x440 lma ffffffff88012fb0
=>  Start address ffffffff88000004
=>  Transfer rate: 630536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[283/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:275 W:0   | mipstx39/jmr3904: psxtmcond10.exe
Result: invalid   
Time: 0:00:00.255178 psxtmcond10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11430 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011430
=>  Loading section .init, size 0x48 lma ffffffff880114a0
=>  Loading section .fini, size 0x30 lma ffffffff880114e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011518
=>  Loading section .dtors, size 0x8 lma ffffffff88011520
=>  Loading section .rdata, size 0x1ac9 lma ffffffff88011530
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013000
=>  Loading section .data, size 0x440 lma ffffffff88013018
=>  Start address ffffffff88000004
=>  Transfer rate: 631368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[284/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmkey01.exe
Result: invalid   
Time: 0:00:00.258866 psxtmkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x104f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880104f0
=>  Loading section .init, size 0x48 lma ffffffff88010560
=>  Loading section .fini, size 0x30 lma ffffffff880105a8
=>  Loading section .ctors, size 0x8 lma ffffffff880105d8
=>  Loading section .dtors, size 0x8 lma ffffffff880105e0
=>  Loading section .rdata, size 0x1a6d lma ffffffff880105f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012060
=>  Loading section .data, size 0x4a8 lma ffffffff88012078
=>  Start address ffffffff88000004
=>  Transfer rate: 600232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[285/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmkey02.exe
Result: invalid   
Time: 0:00:00.268790 psxtmkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109f0
=>  Loading section .init, size 0x48 lma ffffffff88010a60
=>  Loading section .fini, size 0x30 lma ffffffff88010aa8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ad8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ae0
=>  Loading section .rdata, size 0x1a8d lma ffffffff88010af0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012580
=>  Loading section .data, size 0x4a8 lma ffffffff88012598
=>  Start address ffffffff88000004
=>  Transfer rate: 610728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[286/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmq01.exe
Result: invalid   
Time: 0:00:00.259462 psxtmmq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ca0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012ca0
=>  Loading section .init, size 0x48 lma ffffffff88012d10
=>  Loading section .fini, size 0x30 lma ffffffff88012d58
=>  Loading section .ctors, size 0x8 lma ffffffff88012d88
=>  Loading section .dtors, size 0x8 lma ffffffff88012d90
=>  Loading section .rdata, size 0x1d34 lma ffffffff88012da0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ad8
=>  Loading section .data, size 0x480 lma ffffffff88014af0
=>  Start address ffffffff88000004
=>  Transfer rate: 686880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[287/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmqrcvblock01.exe
Result: invalid   
Time: 0:00:00.266945 psxtmmqrcvblock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ef0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ef0
=>  Loading section .init, size 0x48 lma ffffffff88010f60
=>  Loading section .fini, size 0x30 lma ffffffff88010fa8
=>  Loading section .ctors, size 0x8 lma ffffffff88010fd8
=>  Loading section .dtors, size 0x8 lma ffffffff88010fe0
=>  Loading section .rdata, size 0x1a91 lma ffffffff88010ff0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a88
=>  Loading section .data, size 0x470 lma ffffffff88012aa0
=>  Start address ffffffff88000004
=>  Transfer rate: 620552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[288/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmqrcvblock02.exe
Result: invalid   
Time: 0:00:00.262325 psxtmmqrcvblock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014c00
=>  Loading section .init, size 0x48 lma ffffffff88014c70
=>  Loading section .fini, size 0x30 lma ffffffff88014cb8
=>  Loading section .ctors, size 0x8 lma ffffffff88014ce8
=>  Loading section .dtors, size 0x8 lma ffffffff88014cf0
=>  Loading section .rdata, size 0x1c5c lma ffffffff88014d00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016960
=>  Loading section .data, size 0x4e0 lma ffffffff88016978
=>  Start address ffffffff88000004
=>  Transfer rate: 750176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[289/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmutex01.exe
Result: invalid   
Time: 0:00:00.264612 psxtmmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10340 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010340
=>  Loading section .init, size 0x48 lma ffffffff880103b0
=>  Loading section .fini, size 0x30 lma ffffffff880103f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010428
=>  Loading section .dtors, size 0x8 lma ffffffff88010430
=>  Loading section .rdata, size 0x1a8d lma ffffffff88010440
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ed0
=>  Loading section .data, size 0x440 lma ffffffff88011ee8
=>  Start address ffffffff88000004
=>  Transfer rate: 596200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[290/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmutex02.exe
Result: invalid   
Time: 0:00:00.264995 psxtmmutex02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10870 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010870
=>  Loading section .init, size 0x48 lma ffffffff880108e0
=>  Loading section .fini, size 0x30 lma ffffffff88010928
=>  Loading section .ctors, size 0x8 lma ffffffff88010958
=>  Loading section .dtors, size 0x8 lma ffffffff88010960
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010970
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123f8
=>  Loading section .data, size 0x440 lma ffffffff88012410
=>  Start address ffffffff88000004
=>  Transfer rate: 606728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[291/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:283 W:0   | mipstx39/jmr3904: psxtmmutex03.exe
Result: invalid   
Time: 0:00:00.403835 psxtmmutex03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11080 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011080
=>  Loading section .init, size 0x48 lma ffffffff880110f0
=>  Loading section .fini, size 0x30 lma ffffffff88011138
=>  Loading section .ctors, size 0x8 lma ffffffff88011168
=>  Loading section .dtors, size 0x8 lma ffffffff88011170
=>  Loading section .rdata, size 0x1b15 lma ffffffff88011180
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c98
=>  Loading section .data, size 0x440 lma ffffffff88012cb0
=>  Start address ffffffff88000004
=>  Transfer rate: 624424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[292/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex04.exe
Result: invalid   
Time: 0:00:00.254501 psxtmmutex04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b40
=>  Loading section .init, size 0x48 lma ffffffff88010bb0
=>  Loading section .fini, size 0x30 lma ffffffff88010bf8
=>  Loading section .ctors, size 0x8 lma ffffffff88010c28
=>  Loading section .dtors, size 0x8 lma ffffffff88010c30
=>  Loading section .rdata, size 0x1a89 lma ffffffff88010c40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126d0
=>  Loading section .data, size 0x440 lma ffffffff880126e8
=>  Start address ffffffff88000004
=>  Transfer rate: 612552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[293/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex05.exe
Result: invalid   
Time: 0:00:00.265523 psxtmmutex05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b50
=>  Loading section .init, size 0x48 lma ffffffff88010bc0
=>  Loading section .fini, size 0x30 lma ffffffff88010c08
=>  Loading section .ctors, size 0x8 lma ffffffff88010c38
=>  Loading section .dtors, size 0x8 lma ffffffff88010c40
=>  Loading section .rdata, size 0x1a91 lma ffffffff88010c50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126e8
=>  Loading section .data, size 0x440 lma ffffffff88012700
=>  Start address ffffffff88000004
=>  Transfer rate: 612744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[294/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex06.exe
Result: invalid   
Time: 0:00:00.255116 psxtmmutex06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d50
=>  Loading section .init, size 0x48 lma ffffffff88010dc0
=>  Loading section .fini, size 0x30 lma ffffffff88010e08
=>  Loading section .ctors, size 0x8 lma ffffffff88010e38
=>  Loading section .dtors, size 0x8 lma ffffffff88010e40
=>  Loading section .rdata, size 0x1a89 lma ffffffff88010e50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128e0
=>  Loading section .data, size 0x440 lma ffffffff880128f8
=>  Start address ffffffff88000004
=>  Transfer rate: 616776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[295/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutex07.exe
Result: invalid   
Time: 0:00:00.253682 psxtmmutex07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f40
=>  Loading section .init, size 0x48 lma ffffffff88010fb0
=>  Loading section .fini, size 0x30 lma ffffffff88010ff8
=>  Loading section .ctors, size 0x8 lma ffffffff88011028
=>  Loading section .dtors, size 0x8 lma ffffffff88011030
=>  Loading section .rdata, size 0x1aa5 lma ffffffff88011040
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ae8
=>  Loading section .data, size 0x440 lma ffffffff88012b00
=>  Start address ffffffff88000004
=>  Transfer rate: 620968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[296/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmmutexattr01.exe
Result: invalid   
Time: 0:00:00.260134 psxtmmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105a0
=>  Loading section .init, size 0x48 lma ffffffff88010610
=>  Loading section .fini, size 0x30 lma ffffffff88010658
=>  Loading section .ctors, size 0x8 lma ffffffff88010688
=>  Loading section .dtors, size 0x8 lma ffffffff88010690
=>  Loading section .rdata, size 0x1c6d lma ffffffff880106a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012310
=>  Loading section .data, size 0x440 lma ffffffff88012328
=>  Start address ffffffff88000004
=>  Transfer rate: 604904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[297/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmnanosleep01.exe
Result: invalid   
Time: 0:00:00.252655 psxtmnanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10bc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010bc0
=>  Loading section .init, size 0x48 lma ffffffff88010c30
=>  Loading section .fini, size 0x30 lma ffffffff88010c78
=>  Loading section .ctors, size 0x8 lma ffffffff88010ca8
=>  Loading section .dtors, size 0x8 lma ffffffff88010cb0
=>  Loading section .rdata, size 0x1a15 lma ffffffff88010cc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126d8
=>  Loading section .data, size 0x448 lma ffffffff880126f0
=>  Start address ffffffff88000004
=>  Transfer rate: 612712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[298/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmnanosleep02.exe
Result: invalid   
Time: 0:00:00.262695 psxtmnanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10cc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010cc0
=>  Loading section .init, size 0x48 lma ffffffff88010d30
=>  Loading section .fini, size 0x30 lma ffffffff88010d78
=>  Loading section .ctors, size 0x8 lma ffffffff88010da8
=>  Loading section .dtors, size 0x8 lma ffffffff88010db0
=>  Loading section .rdata, size 0x1a69 lma ffffffff88010dc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012830
=>  Loading section .data, size 0x450 lma ffffffff88012848
=>  Start address ffffffff88000004
=>  Transfer rate: 615496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[299/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:291 W:0   | mipstx39/jmr3904: psxtmonce01.exe
Result: invalid   
Time: 0:00:00.262261 psxtmonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10560 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010560
=>  Loading section .init, size 0x48 lma ffffffff880105d0
=>  Loading section .fini, size 0x30 lma ffffffff88010618
=>  Loading section .ctors, size 0x8 lma ffffffff88010648
=>  Loading section .dtors, size 0x8 lma ffffffff88010650
=>  Loading section .rdata, size 0x1a65 lma ffffffff88010660
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120c8
=>  Loading section .data, size 0x468 lma ffffffff880120e0
=>  Start address ffffffff88000004
=>  Transfer rate: 600552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[300/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock01.exe
Result: invalid   
Time: 0:00:00.256945 psxtmrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11140 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011140
=>  Loading section .init, size 0x48 lma ffffffff880111b0
=>  Loading section .fini, size 0x30 lma ffffffff880111f8
=>  Loading section .ctors, size 0x8 lma ffffffff88011228
=>  Loading section .dtors, size 0x8 lma ffffffff88011230
=>  Loading section .rdata, size 0x1bfd lma ffffffff88011240
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e40
=>  Loading section .data, size 0x440 lma ffffffff88012e58
=>  Start address ffffffff88000004
=>  Transfer rate: 627816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[301/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock02.exe
Result: invalid   
Time: 0:00:00.258886 psxtmrwlock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010790
=>  Loading section .init, size 0x48 lma ffffffff88010800
=>  Loading section .fini, size 0x30 lma ffffffff88010848
=>  Loading section .ctors, size 0x8 lma ffffffff88010878
=>  Loading section .dtors, size 0x8 lma ffffffff88010880
=>  Loading section .rdata, size 0x1a79 lma ffffffff88010890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012310
=>  Loading section .data, size 0x440 lma ffffffff88012328
=>  Start address ffffffff88000004
=>  Transfer rate: 604872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[302/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock03.exe
Result: invalid   
Time: 0:00:00.257304 psxtmrwlock03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ef0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ef0
=>  Loading section .init, size 0x48 lma ffffffff88010f60
=>  Loading section .fini, size 0x30 lma ffffffff88010fa8
=>  Loading section .ctors, size 0x8 lma ffffffff88010fd8
=>  Loading section .dtors, size 0x8 lma ffffffff88010fe0
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010ff0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a78
=>  Loading section .data, size 0x440 lma ffffffff88012a90
=>  Start address ffffffff88000004
=>  Transfer rate: 620040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[303/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock04.exe
Result: invalid   
Time: 0:00:00.265679 psxtmrwlock04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105f0
=>  Loading section .init, size 0x48 lma ffffffff88010660
=>  Loading section .fini, size 0x30 lma ffffffff880106a8
=>  Loading section .ctors, size 0x8 lma ffffffff880106d8
=>  Loading section .dtors, size 0x8 lma ffffffff880106e0
=>  Loading section .rdata, size 0x1a79 lma ffffffff880106f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012170
=>  Loading section .data, size 0x440 lma ffffffff88012188
=>  Start address ffffffff88000004
=>  Transfer rate: 601544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[304/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock05.exe
Result: invalid   
Time: 0:00:00.260656 psxtmrwlock05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d20
=>  Loading section .init, size 0x48 lma ffffffff88010d90
=>  Loading section .fini, size 0x30 lma ffffffff88010dd8
=>  Loading section .ctors, size 0x8 lma ffffffff88010e08
=>  Loading section .dtors, size 0x8 lma ffffffff88010e10
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010e20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128a8
=>  Loading section .data, size 0x440 lma ffffffff880128c0
=>  Start address ffffffff88000004
=>  Transfer rate: 616328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[305/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock06.exe
Result: invalid   
Time: 0:00:00.262560 psxtmrwlock06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10740 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010740
=>  Loading section .init, size 0x48 lma ffffffff880107b0
=>  Loading section .fini, size 0x30 lma ffffffff880107f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010828
=>  Loading section .dtors, size 0x8 lma ffffffff88010830
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010840
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122c8
=>  Loading section .data, size 0x440 lma ffffffff880122e0
=>  Start address ffffffff88000004
=>  Transfer rate: 604296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[306/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmrwlock07.exe
Result: invalid   
Time: 0:00:00.259985 psxtmrwlock07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10940 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010940
=>  Loading section .init, size 0x48 lma ffffffff880109b0
=>  Loading section .fini, size 0x30 lma ffffffff880109f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010a28
=>  Loading section .dtors, size 0x8 lma ffffffff88010a30
=>  Loading section .rdata, size 0x1a79 lma ffffffff88010a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124c0
=>  Loading section .data, size 0x440 lma ffffffff880124d8
=>  Start address ffffffff88000004
=>  Transfer rate: 608328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[307/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:299 W:0   | mipstx39/jmr3904: psxtmsem01.exe
Result: invalid   
Time: 0:00:00.251014 psxtmsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ab0
=>  Loading section .init, size 0x48 lma ffffffff88010b20
=>  Loading section .fini, size 0x30 lma ffffffff88010b68
=>  Loading section .ctors, size 0x8 lma ffffffff88010b98
=>  Loading section .dtors, size 0x8 lma ffffffff88010ba0
=>  Loading section .rdata, size 0x1b2d lma ffffffff88010bb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126e0
=>  Loading section .data, size 0x470 lma ffffffff880126f8
=>  Start address ffffffff88000004
=>  Transfer rate: 613096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[308/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsem02.exe
Result: invalid   
Time: 0:00:00.264432 psxtmsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10750 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010750
=>  Loading section .init, size 0x48 lma ffffffff880107c0
=>  Loading section .fini, size 0x30 lma ffffffff88010808
=>  Loading section .ctors, size 0x8 lma ffffffff88010838
=>  Loading section .dtors, size 0x8 lma ffffffff88010840
=>  Loading section .rdata, size 0x1ab5 lma ffffffff88010850
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012308
=>  Loading section .data, size 0x440 lma ffffffff88012320
=>  Start address ffffffff88000004
=>  Transfer rate: 604840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[309/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsem03.exe
Result: invalid   
Time: 0:00:00.261831 psxtmsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10310 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010310
=>  Loading section .init, size 0x48 lma ffffffff88010380
=>  Loading section .fini, size 0x30 lma ffffffff880103c8
=>  Loading section .ctors, size 0x8 lma ffffffff880103f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010400
=>  Loading section .rdata, size 0x1a51 lma ffffffff88010410
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e68
=>  Loading section .data, size 0x440 lma ffffffff88011e80
=>  Start address ffffffff88000004
=>  Transfer rate: 595336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[310/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsem04.exe
Result: invalid   
Time: 0:00:00.257076 psxtmsem04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010520
=>  Loading section .init, size 0x48 lma ffffffff88010590
=>  Loading section .fini, size 0x30 lma ffffffff880105d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010608
=>  Loading section .dtors, size 0x8 lma ffffffff88010610
=>  Loading section .rdata, size 0x1a59 lma ffffffff88010620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012080
=>  Loading section .data, size 0x440 lma ffffffff88012098
=>  Start address ffffffff88000004
=>  Transfer rate: 599624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[311/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsem05.exe
Result: invalid   
Time: 0:00:00.255689 psxtmsem05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10720 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010720
=>  Loading section .init, size 0x48 lma ffffffff88010790
=>  Loading section .fini, size 0x30 lma ffffffff880107d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010808
=>  Loading section .dtors, size 0x8 lma ffffffff88010810
=>  Loading section .rdata, size 0x1a59 lma ffffffff88010820
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012280
=>  Loading section .data, size 0x440 lma ffffffff88012298
=>  Start address ffffffff88000004
=>  Transfer rate: 603720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[312/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsleep01.exe
Result: invalid   
Time: 0:00:00.260207 psxtmsleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c10
=>  Loading section .init, size 0x48 lma ffffffff88010c80
=>  Loading section .fini, size 0x30 lma ffffffff88010cc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010cf8
=>  Loading section .dtors, size 0x8 lma ffffffff88010d00
=>  Loading section .rdata, size 0x1a14 lma ffffffff88010d10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012728
=>  Loading section .data, size 0x44c lma ffffffff88012740
=>  Start address ffffffff88000004
=>  Transfer rate: 613376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[313/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmsleep02.exe
Result: invalid   
Time: 0:00:00.268071 psxtmsleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10cf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010cf0
=>  Loading section .init, size 0x48 lma ffffffff88010d60
=>  Loading section .fini, size 0x30 lma ffffffff88010da8
=>  Loading section .ctors, size 0x8 lma ffffffff88010dd8
=>  Loading section .dtors, size 0x8 lma ffffffff88010de0
=>  Loading section .rdata, size 0x1a60 lma ffffffff88010df0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012850
=>  Loading section .data, size 0x44c lma ffffffff88012868
=>  Start address ffffffff88000004
=>  Transfer rate: 615776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[314/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmthread01.exe
Result: invalid   
Time: 0:00:00.264271 psxtmthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10180 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010180
=>  Loading section .init, size 0x48 lma ffffffff880101f0
=>  Loading section .fini, size 0x30 lma ffffffff88010238
=>  Loading section .ctors, size 0x8 lma ffffffff88010268
=>  Loading section .dtors, size 0x8 lma ffffffff88010270
=>  Loading section .rdata, size 0x1a49 lma ffffffff88010280
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cd0
=>  Loading section .data, size 0x440 lma ffffffff88011ce8
=>  Start address ffffffff88000004
=>  Transfer rate: 592072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[315/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:307 W:0   | mipstx39/jmr3904: psxtmthread02.exe
Result: invalid   
Time: 0:00:00.491928 psxtmthread02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010220
=>  Loading section .init, size 0x48 lma ffffffff88010290
=>  Loading section .fini, size 0x30 lma ffffffff880102d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010308
=>  Loading section .dtors, size 0x8 lma ffffffff88010310
=>  Loading section .rdata, size 0x1a41 lma ffffffff88010320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d68
=>  Loading section .data, size 0x440 lma ffffffff88011d80
=>  Start address ffffffff88000004
=>  Transfer rate: 593288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[316/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread03.exe
Result: invalid   
Time: 0:00:00.273280 psxtmthread03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10140 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010140
=>  Loading section .init, size 0x48 lma ffffffff880101b0
=>  Loading section .fini, size 0x30 lma ffffffff880101f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010228
=>  Loading section .dtors, size 0x8 lma ffffffff88010230
=>  Loading section .rdata, size 0x1a41 lma ffffffff88010240
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c88
=>  Loading section .data, size 0x440 lma ffffffff88011ca0
=>  Start address ffffffff88000004
=>  Transfer rate: 591496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[317/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread04.exe
Result: invalid   
Time: 0:00:00.264346 psxtmthread04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10500 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010500
=>  Loading section .init, size 0x48 lma ffffffff88010570
=>  Loading section .fini, size 0x30 lma ffffffff880105b8
=>  Loading section .ctors, size 0x8 lma ffffffff880105e8
=>  Loading section .dtors, size 0x8 lma ffffffff880105f0
=>  Loading section .rdata, size 0x1a7d lma ffffffff88010600
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012080
=>  Loading section .data, size 0x440 lma ffffffff88012098
=>  Start address ffffffff88000004
=>  Transfer rate: 599656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[318/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread05.exe
Result: invalid   
Time: 0:00:00.268099 psxtmthread05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10540 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010540
=>  Loading section .init, size 0x48 lma ffffffff880105b0
=>  Loading section .fini, size 0x30 lma ffffffff880105f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010628
=>  Loading section .dtors, size 0x8 lma ffffffff88010630
=>  Loading section .rdata, size 0x1a61 lma ffffffff88010640
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120a8
=>  Loading section .data, size 0x440 lma ffffffff880120c0
=>  Start address ffffffff88000004
=>  Transfer rate: 599944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[319/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthread06.exe
Result: invalid   
Time: 0:00:00.261890 psxtmthread06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010530
=>  Loading section .init, size 0x48 lma ffffffff880105a0
=>  Loading section .fini, size 0x30 lma ffffffff880105e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010618
=>  Loading section .dtors, size 0x8 lma ffffffff88010620
=>  Loading section .rdata, size 0x1a61 lma ffffffff88010630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012098
=>  Loading section .data, size 0x440 lma ffffffff880120b0
=>  Start address ffffffff88000004
=>  Transfer rate: 599816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[320/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: psxtmthreadattr01.exe
Result: invalid   
Time: 0:00:00.268283 psxtmthreadattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109d0
=>  Loading section .init, size 0x48 lma ffffffff88010a40
=>  Loading section .fini, size 0x30 lma ffffffff88010a88
=>  Loading section .ctors, size 0x8 lma ffffffff88010ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ac0
=>  Loading section .rdata, size 0x1d89 lma ffffffff88010ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012860
=>  Loading section .data, size 0x440 lma ffffffff88012878
=>  Start address ffffffff88000004
=>  Transfer rate: 615752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[321/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: rhdeadlockbrk.exe
Result: invalid   
Time: 0:00:00.256171 rhdeadlockbrk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x117b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880117b0
=>  Loading section .init, size 0x48 lma ffffffff88011820
=>  Loading section .fini, size 0x30 lma ffffffff88011868
=>  Loading section .ctors, size 0x8 lma ffffffff88011898
=>  Loading section .dtors, size 0x8 lma ffffffff880118a0
=>  Loading section .rdata, size 0x1e8d lma ffffffff880118b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013740
=>  Loading section .data, size 0x470 lma ffffffff88013758
=>  Start address ffffffff88000004
=>  Transfer rate: 646632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[322/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: rhilatency.exe
Result: invalid   
Time: 0:00:00.270183 rhilatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fc60
=>  Loading section .init, size 0x48 lma ffffffff8800fcd0
=>  Loading section .fini, size 0x30 lma ffffffff8800fd18
=>  Loading section .ctors, size 0x8 lma ffffffff8800fd48
=>  Loading section .dtors, size 0x8 lma ffffffff8800fd50
=>  Loading section .rdata, size 0x1dd5 lma ffffffff8800fd60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b38
=>  Loading section .data, size 0x440 lma ffffffff88011b50
=>  Start address ffffffff88000004
=>  Transfer rate: 588840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[323/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:315 W:0   | mipstx39/jmr3904: rhmlatency.exe
Result: invalid   
Time: 0:00:00.257551 rhmlatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106b0
=>  Loading section .init, size 0x48 lma ffffffff88010720
=>  Loading section .fini, size 0x30 lma ffffffff88010768
=>  Loading section .ctors, size 0x8 lma ffffffff88010798
=>  Loading section .dtors, size 0x8 lma ffffffff880107a0
=>  Loading section .rdata, size 0x1e31 lma ffffffff880107b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125e8
=>  Loading section .data, size 0x470 lma ffffffff88012600
=>  Start address ffffffff88000004
=>  Transfer rate: 611080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[324/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:323 W:0   | mipstx39/jmr3904: rhsemshuffle.exe
Result: invalid   
Time: 0:00:00.256441 rhsemshuffle.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012060
=>  Loading section .init, size 0x48 lma ffffffff880120d0
=>  Loading section .fini, size 0x30 lma ffffffff88012118
=>  Loading section .ctors, size 0x8 lma ffffffff88012148
=>  Loading section .dtors, size 0x8 lma ffffffff88012150
=>  Loading section .rdata, size 0x1ea1 lma ffffffff88012160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014008
=>  Loading section .data, size 0x480 lma ffffffff88014020
=>  Start address ffffffff88000004
=>  Transfer rate: 664712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[325/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:323 W:0   | mipstx39/jmr3904: rhtaskpreempt.exe
Result: invalid   
Time: 0:00:00.266135 rhtaskpreempt.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fab0
=>  Loading section .init, size 0x48 lma ffffffff8800fb20
=>  Loading section .fini, size 0x30 lma ffffffff8800fb68
=>  Loading section .ctors, size 0x8 lma ffffffff8800fb98
=>  Loading section .dtors, size 0x8 lma ffffffff8800fba0
=>  Loading section .rdata, size 0x1e1d lma ffffffff8800fbb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119d0
=>  Loading section .data, size 0x440 lma ffffffff880119e8
=>  Start address ffffffff88000004
=>  Transfer rate: 585960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[326/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:323 W:0   | mipstx39/jmr3904: rhtaskswitch.exe
Result: invalid   
Time: 0:00:00.260048 rhtaskswitch.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f930
=>  Loading section .init, size 0x48 lma ffffffff8800f9a0
=>  Loading section .fini, size 0x30 lma ffffffff8800f9e8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fa18
=>  Loading section .dtors, size 0x8 lma ffffffff8800fa20
=>  Loading section .rdata, size 0x1e1d lma ffffffff8800fa30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011850
=>  Loading section .data, size 0x440 lma ffffffff88011868
=>  Start address ffffffff88000004
=>  Transfer rate: 582888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[327/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:323 W:0   | mipstx39/jmr3904: base_sp.exe
Result: invalid   
Time: 0:00:00.261304 base_sp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010620
=>  Loading section .init, size 0x48 lma ffffffff88010690
=>  Loading section .fini, size 0x30 lma ffffffff880106d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010708
=>  Loading section .dtors, size 0x8 lma ffffffff88010710
=>  Loading section .rdata, size 0x1e68 lma ffffffff88010720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012588
=>  Loading section .data, size 0x450 lma ffffffff880125a0
=>  Start address ffffffff88000004
=>  Transfer rate: 610112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[328/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:323 W:0   | mipstx39/jmr3904: capture.exe
Result: invalid   
Time: 0:00:00.253914 capture.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2fe40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8802fe40
=>  Loading section .init, size 0x48 lma ffffffff8802fec0
=>  Loading section .fini, size 0x30 lma ffffffff8802ff08
=>  Loading section .ctors, size 0x8 lma ffffffff8802ff38
=>  Loading section .dtors, size 0x8 lma ffffffff8802ff40
=>  Loading section .rdata, size 0x5718 lma ffffffff8802ff50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88035668
=>  Loading section .data, size 0x9b0 lma ffffffff88035680
=>  Start address ffffffff88000004
=>  Transfer rate: 1769792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[329/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:323 W:0   | mipstx39/jmr3904: cdtest.exe
Result: invalid   
Time: 0:00:00.254132 cdtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2dce0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8802dce0
=>  Loading section .init, size 0x48 lma ffffffff8802dd60
=>  Loading section .fini, size 0x30 lma ffffffff8802dda8
=>  Loading section .ctors, size 0x1c lma ffffffff8802ddd8
=>  Loading section .dtors, size 0x8 lma ffffffff8802ddf4
=>  Loading section .rdata, size 0x4644 lma ffffffff8802de00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88032448
=>  Loading section .rel.dyn, size 0x20 lma ffffffff88032460
=>  Loading section .data, size 0x670 lma ffffffff88032480
=>  Loading section .sdata, size 0x4 lma ffffffff88032af0
=>  Start address ffffffff88000004
=>  Transfer rate: 1660768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[330/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:323 W:0   | mipstx39/jmr3904: fileio.exe
Result: invalid   
Time: 0:00:00.260496 fileio.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x85970 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88085970
=>  Loading section .init, size 0x48 lma ffffffff880859f0
=>  Loading section .fini, size 0x30 lma ffffffff88085a38
=>  Loading section .ctors, size 0x8 lma ffffffff88085a68
=>  Loading section .dtors, size 0x8 lma ffffffff88085a70
=>  Loading section .rdata, size 0x12a20 lma ffffffff88085a80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880984a0
=>  Loading section .data, size 0x14d0 lma ffffffff880984b8
=>  Start address ffffffff88000004
=>  Transfer rate: 5032960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[331/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:323 W:0   | mipstx39/jmr3904: hello.exe
Result: invalid   
Time: 0:00:00.256530 hello.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x179a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880179a0
=>  Loading section .init, size 0x48 lma ffffffff88017a10
=>  Loading section .fini, size 0x30 lma ffffffff88017a58
=>  Loading section .ctors, size 0x8 lma ffffffff88017a88
=>  Loading section .dtors, size 0x8 lma ffffffff88017a90
=>  Loading section .rdata, size 0x1fe8 lma ffffffff88017aa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019a88
=>  Loading section .data, size 0x5d4 lma ffffffff88019aa0
=>  Start address ffffffff88000004
=>  Transfer rate: 852832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[332/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:331 W:0   | mipstx39/jmr3904: iostream.exe
Result: invalid   
Time: 0:00:00.260365 iostream.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x958a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880958a0
=>  Loading section .init, size 0x48 lma ffffffff88095920
=>  Loading section .fini, size 0x30 lma ffffffff88095968
=>  Loading section .ctors, size 0x34 lma ffffffff88095998
=>  Loading section .dtors, size 0x8 lma ffffffff880959cc
=>  Loading section .rdata, size 0xa224 lma ffffffff880959e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8809fc08
=>  Loading section .rel.dyn, size 0x18 lma ffffffff8809fc20
=>  Loading section .data, size 0x740 lma ffffffff8809fc38
=>  Loading section .sdata, size 0x4 lma ffffffff880a0378
=>  Start address ffffffff88000004
=>  Transfer rate: 5249888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[333/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:331 W:0   | mipstx39/jmr3904: minimum.exe
[334/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:331 W:0   | mipstx39/jmr3904: nsecs.exe
Result: invalid   
Time: 0:00:00.254156 nsecs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x180e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880180e0
=>  Loading section .init, size 0x48 lma ffffffff88018150
=>  Loading section .fini, size 0x30 lma ffffffff88018198
=>  Loading section .ctors, size 0x8 lma ffffffff880181c8
=>  Loading section .dtors, size 0x8 lma ffffffff880181d0
=>  Loading section .rdata, size 0x2760 lma ffffffff880181e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a940
=>  Loading section .data, size 0x654 lma ffffffff8801a958
=>  Start address ffffffff88000004
=>  Transfer rate: 884000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[335/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:331 W:0   | mipstx39/jmr3904: paranoia.exe
Result: invalid   
Time: 0:00:00.262045 paranoia.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022620
=>  Loading section .init, size 0x48 lma ffffffff88022690
=>  Loading section .fini, size 0x30 lma ffffffff880226d8
=>  Loading section .ctors, size 0x8 lma ffffffff88022708
=>  Loading section .dtors, size 0x8 lma ffffffff88022710
=>  Loading section .rdata, size 0x5180 lma ffffffff88022720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880278a0
=>  Loading section .data, size 0x764 lma ffffffff880278b8
=>  Start address ffffffff88000004
=>  Transfer rate: 1310880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[336/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:331 W:0   | mipstx39/jmr3904: ticker.exe
Result: invalid   
Time: 0:00:00.256756 ticker.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119b0
=>  Loading section .init, size 0x48 lma ffffffff88011a20
=>  Loading section .fini, size 0x30 lma ffffffff88011a68
=>  Loading section .ctors, size 0x8 lma ffffffff88011a98
=>  Loading section .dtors, size 0x8 lma ffffffff88011aa0
=>  Loading section .rdata, size 0x2014 lma ffffffff88011ab0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ac8
=>  Loading section .data, size 0x5f8 lma ffffffff88013ae0
=>  Start address ffffffff88000004
=>  Transfer rate: 656992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[337/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:331 W:0   | mipstx39/jmr3904: unlimited.exe
Result: invalid   
Time: 0:00:00.255348 unlimited.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x121a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880121a0
=>  Loading section .init, size 0x48 lma ffffffff88012210
=>  Loading section .fini, size 0x30 lma ffffffff88012258
=>  Loading section .ctors, size 0x8 lma ffffffff88012288
=>  Loading section .dtors, size 0x8 lma ffffffff88012290
=>  Loading section .rdata, size 0x1f4c lma ffffffff880122a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880141f0
=>  Loading section .data, size 0x440 lma ffffffff88014208
=>  Start address ffffffff88000004
=>  Transfer rate: 668128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[338/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:331 W:0   | mipstx39/jmr3904: sp01.exe
Result: invalid   
Time: 0:00:00.254300 sp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xbda0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800bda0
=>  Loading section .init, size 0x48 lma ffffffff8800be00
=>  Loading section .fini, size 0x30 lma ffffffff8800be48
=>  Loading section .ctors, size 0x8 lma ffffffff8800be78
=>  Loading section .dtors, size 0x8 lma ffffffff8800be80
=>  Loading section .rdata, size 0x1c0c lma ffffffff8800be90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800daa0
=>  Loading section .data, size 0x350 lma ffffffff8800dab8
=>  Start address ffffffff88000004
=>  Transfer rate: 454624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[339/594] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:331 W:0   | mipstx39/jmr3904: sp02.exe
Result: invalid   
Time: 0:00:00.256344 sp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c60
=>  Loading section .init, size 0x48 lma ffffffff88011cd0
=>  Loading section .fini, size 0x30 lma ffffffff88011d18
=>  Loading section .ctors, size 0x8 lma ffffffff88011d48
=>  Loading section .dtors, size 0x8 lma ffffffff88011d50
=>  Loading section .rdata, size 0x22ed lma ffffffff88011d60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014050
=>  Loading section .data, size 0x450 lma ffffffff88014068
=>  Start address ffffffff88000004
=>  Transfer rate: 664936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[340/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:338 W:0   | mipstx39/jmr3904: sp03.exe
Result: invalid   
Time: 0:00:00.261001 sp03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11e60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011e60
=>  Loading section .init, size 0x48 lma ffffffff88011ed0
=>  Loading section .fini, size 0x30 lma ffffffff88011f18
=>  Loading section .ctors, size 0x8 lma ffffffff88011f48
=>  Loading section .dtors, size 0x8 lma ffffffff88011f50
=>  Loading section .rdata, size 0x20d8 lma ffffffff88011f60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014038
=>  Loading section .data, size 0x478 lma ffffffff88014050
=>  Start address ffffffff88000004
=>  Transfer rate: 665088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[341/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:338 W:0   | mipstx39/jmr3904: sp04.exe
Result: invalid   
Time: 0:00:00.260255 sp04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13800 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013800
=>  Loading section .init, size 0x48 lma ffffffff88013880
=>  Loading section .fini, size 0x30 lma ffffffff880138c8
=>  Loading section .ctors, size 0x8 lma ffffffff880138f8
=>  Loading section .dtors, size 0x8 lma ffffffff88013900
=>  Loading section .rdata, size 0x2340 lma ffffffff88013910
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015c50
=>  Loading section .data, size 0x648 lma ffffffff88015c68
=>  Start address ffffffff88000004
=>  Transfer rate: 726336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[342/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:338 W:0   | mipstx39/jmr3904: sp05.exe
Result: invalid   
Time: 0:00:00.257122 sp05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10eb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010eb0
=>  Loading section .init, size 0x48 lma ffffffff88010f20
=>  Loading section .fini, size 0x30 lma ffffffff88010f68
=>  Loading section .ctors, size 0x8 lma ffffffff88010f98
=>  Loading section .dtors, size 0x8 lma ffffffff88010fa0
=>  Loading section .rdata, size 0x2141 lma ffffffff88010fb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130f8
=>  Loading section .data, size 0x450 lma ffffffff88013110
=>  Start address ffffffff88000004
=>  Transfer rate: 633480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[343/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:338 W:0   | mipstx39/jmr3904: sp06.exe
Result: invalid   
Time: 0:00:00.296642 sp06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11030 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011030
=>  Loading section .init, size 0x48 lma ffffffff880110a0
=>  Loading section .fini, size 0x30 lma ffffffff880110e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011118
=>  Loading section .dtors, size 0x8 lma ffffffff88011120
=>  Loading section .rdata, size 0x1fcd lma ffffffff88011130
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013100
=>  Loading section .data, size 0x450 lma ffffffff88013118
=>  Start address ffffffff88000004
=>  Transfer rate: 633576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[344/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:338 W:0   | mipstx39/jmr3904: sp07.exe
Result: invalid   
Time: 0:00:00.267074 sp07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012950
=>  Loading section .init, size 0x48 lma ffffffff880129c0
=>  Loading section .fini, size 0x30 lma ffffffff88012a08
=>  Loading section .ctors, size 0x8 lma ffffffff88012a38
=>  Loading section .dtors, size 0x8 lma ffffffff88012a40
=>  Loading section .rdata, size 0x268c lma ffffffff88012a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150e0
=>  Loading section .data, size 0x620 lma ffffffff880150f8
=>  Start address ffffffff88000004
=>  Transfer rate: 702560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[345/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:338 W:0   | mipstx39/jmr3904: sp08.exe
Result: invalid   
Time: 0:00:00.255651 sp08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ffa0
=>  Loading section .init, size 0x48 lma ffffffff88010010
=>  Loading section .fini, size 0x30 lma ffffffff88010058
=>  Loading section .ctors, size 0x8 lma ffffffff88010088
=>  Loading section .dtors, size 0x8 lma ffffffff88010090
=>  Loading section .rdata, size 0x2125 lma ffffffff880100a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121c8
=>  Loading section .data, size 0x440 lma ffffffff880121e0
=>  Start address ffffffff88000004
=>  Transfer rate: 602280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[346/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:338 W:0   | mipstx39/jmr3904: sp11.exe
Result: invalid   
Time: 0:00:00.259952 sp11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15960 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015960
=>  Loading section .init, size 0x48 lma ffffffff880159d0
=>  Loading section .fini, size 0x30 lma ffffffff88015a18
=>  Loading section .ctors, size 0x8 lma ffffffff88015a48
=>  Loading section .dtors, size 0x8 lma ffffffff88015a50
=>  Loading section .rdata, size 0x3075 lma ffffffff88015a60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018ad8
=>  Loading section .data, size 0x4a8 lma ffffffff88018af0
=>  Start address ffffffff88000004
=>  Transfer rate: 818280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[347/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:338 W:0   | mipstx39/jmr3904: sp12.exe
Result: invalid   
Time: 0:00:00.256462 sp12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880147a0
=>  Loading section .init, size 0x48 lma ffffffff88014810
=>  Loading section .fini, size 0x30 lma ffffffff88014858
=>  Loading section .ctors, size 0x8 lma ffffffff88014888
=>  Loading section .dtors, size 0x8 lma ffffffff88014890
=>  Loading section .rdata, size 0x2ea4 lma ffffffff880148a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017748
=>  Loading section .data, size 0x480 lma ffffffff88017760
=>  Start address ffffffff88000004
=>  Transfer rate: 777888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[348/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:346 W:0   | mipstx39/jmr3904: sp13.exe
Result: invalid   
Time: 0:00:00.281446 sp13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x149d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880149d0
=>  Loading section .init, size 0x48 lma ffffffff88014a40
=>  Loading section .fini, size 0x30 lma ffffffff88014a88
=>  Loading section .ctors, size 0x8 lma ffffffff88014ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88014ac0
=>  Loading section .rdata, size 0x2c29 lma ffffffff88014ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017700
=>  Loading section .data, size 0x480 lma ffffffff88017718
=>  Start address ffffffff88000004
=>  Transfer rate: 777288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[349/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:346 W:0   | mipstx39/jmr3904: sp14.exe
Result: invalid   
Time: 0:00:00.259395 sp14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x118b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880118b0
=>  Loading section .init, size 0x48 lma ffffffff88011920
=>  Loading section .fini, size 0x30 lma ffffffff88011968
=>  Loading section .ctors, size 0x8 lma ffffffff88011998
=>  Loading section .dtors, size 0x8 lma ffffffff880119a0
=>  Loading section .rdata, size 0x2291 lma ffffffff880119b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c48
=>  Loading section .data, size 0x480 lma ffffffff88013c60
=>  Start address ffffffff88000004
=>  Transfer rate: 657032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[350/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:346 W:0   | mipstx39/jmr3904: sp15.exe
Result: invalid   
Time: 0:00:00.266462 sp15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011060
=>  Loading section .init, size 0x48 lma ffffffff880110d0
=>  Loading section .fini, size 0x30 lma ffffffff88011118
=>  Loading section .ctors, size 0x8 lma ffffffff88011148
=>  Loading section .dtors, size 0x8 lma ffffffff88011150
=>  Loading section .rdata, size 0x2211 lma ffffffff88011160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013378
=>  Loading section .data, size 0x480 lma ffffffff88013390
=>  Start address ffffffff88000004
=>  Transfer rate: 638984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[351/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:346 W:0   | mipstx39/jmr3904: sp16.exe
Result: invalid   
Time: 0:00:00.256246 sp16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13c30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013c30
=>  Loading section .init, size 0x48 lma ffffffff88013ca0
=>  Loading section .fini, size 0x30 lma ffffffff88013ce8
=>  Loading section .ctors, size 0x8 lma ffffffff88013d18
=>  Loading section .dtors, size 0x8 lma ffffffff88013d20
=>  Loading section .rdata, size 0x2a99 lma ffffffff88013d30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880167d0
=>  Loading section .data, size 0x480 lma ffffffff880167e8
=>  Start address ffffffff88000004
=>  Transfer rate: 746184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[352/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:346 W:0   | mipstx39/jmr3904: sp17.exe
Result: invalid   
Time: 0:00:00.275584 sp17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d00
=>  Loading section .init, size 0x48 lma ffffffff88010d70
=>  Loading section .fini, size 0x30 lma ffffffff88010db8
=>  Loading section .ctors, size 0x8 lma ffffffff88010de8
=>  Loading section .dtors, size 0x8 lma ffffffff88010df0
=>  Loading section .rdata, size 0x1fad lma ffffffff88010e00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012db0
=>  Loading section .data, size 0x450 lma ffffffff88012dc8
=>  Start address ffffffff88000004
=>  Transfer rate: 626792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[353/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:346 W:0   | mipstx39/jmr3904: sp18.exe
Result: invalid   
Time: 0:00:00.254114 sp18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10480 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010480
=>  Loading section .init, size 0x48 lma ffffffff880104f0
=>  Loading section .fini, size 0x30 lma ffffffff88010538
=>  Loading section .ctors, size 0x8 lma ffffffff88010568
=>  Loading section .dtors, size 0x8 lma ffffffff88010570
=>  Loading section .rdata, size 0x1eb9 lma ffffffff88010580
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012440
=>  Loading section .data, size 0x470 lma ffffffff88012458
=>  Start address ffffffff88000004
=>  Transfer rate: 607688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[354/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:346 W:0   | mipstx39/jmr3904: sp19.exe
Result: invalid   
Time: 0:00:00.257726 sp19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1dba0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801dba0
=>  Loading section .init, size 0x48 lma ffffffff8801dc10
=>  Loading section .fini, size 0x30 lma ffffffff8801dc58
=>  Loading section .ctors, size 0x8 lma ffffffff8801dc88
=>  Loading section .dtors, size 0x8 lma ffffffff8801dc90
=>  Loading section .rdata, size 0x3260 lma ffffffff8801dca0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020f00
=>  Loading section .data, size 0x78c lma ffffffff88020f18
=>  Start address ffffffff88000004
=>  Transfer rate: 1094880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[355/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:346 W:0   | mipstx39/jmr3904: sp20.exe
Result: invalid   
Time: 0:00:00.259198 sp20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a210
=>  Loading section .init, size 0x48 lma ffffffff8801a280
=>  Loading section .fini, size 0x30 lma ffffffff8801a2c8
=>  Loading section .ctors, size 0x8 lma ffffffff8801a2f8
=>  Loading section .dtors, size 0x8 lma ffffffff8801a300
=>  Loading section .rdata, size 0x2698 lma ffffffff8801a310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c9a8
=>  Loading section .data, size 0x5fc lma ffffffff8801c9c0
=>  Start address ffffffff88000004
=>  Transfer rate: 949664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[356/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:354 W:0   | mipstx39/jmr3904: sp2038.exe
Result: invalid   
Time: 0:00:00.257810 sp2038.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10710 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010710
=>  Loading section .init, size 0x48 lma ffffffff88010780
=>  Loading section .fini, size 0x30 lma ffffffff880107c8
=>  Loading section .ctors, size 0x8 lma ffffffff880107f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010800
=>  Loading section .rdata, size 0x1d79 lma ffffffff88010810
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012590
=>  Loading section .data, size 0x478 lma ffffffff880125a8
=>  Start address ffffffff88000004
=>  Transfer rate: 610440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[357/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:354 W:0   | mipstx39/jmr3904: sp21.exe
Result: invalid   
Time: 0:00:00.276739 sp21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x149f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880149f0
=>  Loading section .init, size 0x48 lma ffffffff88014a60
=>  Loading section .fini, size 0x30 lma ffffffff88014aa8
=>  Loading section .ctors, size 0x8 lma ffffffff88014ad8
=>  Loading section .dtors, size 0x8 lma ffffffff88014ae0
=>  Loading section .rdata, size 0x2668 lma ffffffff88014af0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017158
=>  Loading section .data, size 0x4a8 lma ffffffff88017170
=>  Start address ffffffff88000004
=>  Transfer rate: 766080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[358/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:354 W:0   | mipstx39/jmr3904: sp22.exe
Result: invalid   
Time: 0:00:00.271823 sp22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12860 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012860
=>  Loading section .init, size 0x48 lma ffffffff880128d0
=>  Loading section .fini, size 0x30 lma ffffffff88012918
=>  Loading section .ctors, size 0x8 lma ffffffff88012948
=>  Loading section .dtors, size 0x8 lma ffffffff88012950
=>  Loading section .rdata, size 0x2338 lma ffffffff88012960
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c98
=>  Loading section .data, size 0x4a8 lma ffffffff88014cb0
=>  Start address ffffffff88000004
=>  Transfer rate: 690816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[359/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:354 W:0   | mipstx39/jmr3904: sp23.exe
Result: invalid   
Time: 0:00:00.253587 sp23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10aa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010aa0
=>  Loading section .init, size 0x48 lma ffffffff88010b10
=>  Loading section .fini, size 0x30 lma ffffffff88010b58
=>  Loading section .ctors, size 0x8 lma ffffffff88010b88
=>  Loading section .dtors, size 0x8 lma ffffffff88010b90
=>  Loading section .rdata, size 0x1f51 lma ffffffff88010ba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012af8
=>  Loading section .data, size 0x480 lma ffffffff88012b10
=>  Start address ffffffff88000004
=>  Transfer rate: 621576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[360/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:354 W:0   | mipstx39/jmr3904: sp24.exe
Result: invalid   
Time: 0:00:00.286819 sp24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011f70
=>  Loading section .init, size 0x48 lma ffffffff88011fe0
=>  Loading section .fini, size 0x30 lma ffffffff88012028
=>  Loading section .ctors, size 0x8 lma ffffffff88012058
=>  Loading section .dtors, size 0x8 lma ffffffff88012060
=>  Loading section .rdata, size 0x20a8 lma ffffffff88012070
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014118
=>  Loading section .data, size 0x5f8 lma ffffffff88014130
=>  Start address ffffffff88000004
=>  Transfer rate: 669952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[361/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:354 W:0   | mipstx39/jmr3904: sp25.exe
Result: invalid   
Time: 0:00:00.289608 sp25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11e80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011e80
=>  Loading section .init, size 0x48 lma ffffffff88011ef0
=>  Loading section .fini, size 0x30 lma ffffffff88011f38
=>  Loading section .ctors, size 0x8 lma ffffffff88011f68
=>  Loading section .dtors, size 0x8 lma ffffffff88011f70
=>  Loading section .rdata, size 0x232d lma ffffffff88011f80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880142b0
=>  Loading section .data, size 0x480 lma ffffffff880142c8
=>  Start address ffffffff88000004
=>  Transfer rate: 670184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[362/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:354 W:0   | mipstx39/jmr3904: sp26.exe
Result: invalid   
Time: 0:00:00.281823 sp26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010950
=>  Loading section .init, size 0x48 lma ffffffff880109c0
=>  Loading section .fini, size 0x30 lma ffffffff88010a08
=>  Loading section .ctors, size 0x8 lma ffffffff88010a38
=>  Loading section .dtors, size 0x8 lma ffffffff88010a40
=>  Loading section .rdata, size 0x1df5 lma ffffffff88010a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012848
=>  Loading section .data, size 0x450 lma ffffffff88012860
=>  Start address ffffffff88000004
=>  Transfer rate: 615720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[363/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:354 W:0   | mipstx39/jmr3904: sp27.exe
Result: invalid   
Time: 0:00:00.269054 sp27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11200 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011200
=>  Loading section .init, size 0x48 lma ffffffff88011270
=>  Loading section .fini, size 0x30 lma ffffffff880112b8
=>  Loading section .ctors, size 0x8 lma ffffffff880112e8
=>  Loading section .dtors, size 0x8 lma ffffffff880112f0
=>  Loading section .rdata, size 0x1e91 lma ffffffff88011300
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013198
=>  Loading section .data, size 0x480 lma ffffffff880131b0
=>  Start address ffffffff88000004
=>  Transfer rate: 635144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[364/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:362 W:0   | mipstx39/jmr3904: sp27a.exe
Result: invalid   
Time: 0:00:00.258967 sp27a.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11200 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011200
=>  Loading section .init, size 0x48 lma ffffffff88011270
=>  Loading section .fini, size 0x30 lma ffffffff880112b8
=>  Loading section .ctors, size 0x8 lma ffffffff880112e8
=>  Loading section .dtors, size 0x8 lma ffffffff880112f0
=>  Loading section .rdata, size 0x1ea1 lma ffffffff88011300
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131a8
=>  Loading section .data, size 0x480 lma ffffffff880131c0
=>  Start address ffffffff88000004
=>  Transfer rate: 635272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[365/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:362 W:0   | mipstx39/jmr3904: sp29.exe
Result: invalid   
Time: 0:00:00.254066 sp29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11940 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011940
=>  Loading section .init, size 0x48 lma ffffffff880119b0
=>  Loading section .fini, size 0x30 lma ffffffff880119f8
=>  Loading section .ctors, size 0x8 lma ffffffff88011a28
=>  Loading section .dtors, size 0x8 lma ffffffff88011a30
=>  Loading section .rdata, size 0x20c9 lma ffffffff88011a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b10
=>  Loading section .data, size 0x480 lma ffffffff88013b28
=>  Start address ffffffff88000004
=>  Transfer rate: 654536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[366/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:362 W:0   | mipstx39/jmr3904: sp30.exe
Result: invalid   
Time: 0:00:00.256710 sp30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12770 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012770
=>  Loading section .init, size 0x48 lma ffffffff880127e0
=>  Loading section .fini, size 0x30 lma ffffffff88012828
=>  Loading section .ctors, size 0x8 lma ffffffff88012858
=>  Loading section .dtors, size 0x8 lma ffffffff88012860
=>  Loading section .rdata, size 0x21a4 lma ffffffff88012870
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014a18
=>  Loading section .data, size 0x5f8 lma ffffffff88014a30
=>  Start address ffffffff88000004
=>  Transfer rate: 688352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[367/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:362 W:0   | mipstx39/jmr3904: sp31.exe
Result: invalid   
Time: 0:00:00.253811 sp31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014c40
=>  Loading section .init, size 0x48 lma ffffffff88014cb0
=>  Loading section .fini, size 0x30 lma ffffffff88014cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88014d28
=>  Loading section .dtors, size 0x8 lma ffffffff88014d30
=>  Loading section .rdata, size 0x26a8 lma ffffffff88014d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880173e8
=>  Loading section .data, size 0x4a8 lma ffffffff88017400
=>  Start address ffffffff88000004
=>  Transfer rate: 771328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[368/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:362 W:0   | mipstx39/jmr3904: sp32.exe
Result: invalid   
Time: 0:00:00.259828 sp32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f90
=>  Loading section .init, size 0x48 lma ffffffff88011000
=>  Loading section .fini, size 0x30 lma ffffffff88011048
=>  Loading section .ctors, size 0x8 lma ffffffff88011078
=>  Loading section .dtors, size 0x8 lma ffffffff88011080
=>  Loading section .rdata, size 0x1e4d lma ffffffff88011090
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ee0
=>  Loading section .data, size 0x480 lma ffffffff88012ef8
=>  Start address ffffffff88000004
=>  Transfer rate: 629608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[369/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:362 W:0   | mipstx39/jmr3904: sp33.exe
Result: invalid   
Time: 0:00:00.261325 sp33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011950
=>  Loading section .init, size 0x48 lma ffffffff880119c0
=>  Loading section .fini, size 0x30 lma ffffffff88011a08
=>  Loading section .ctors, size 0x8 lma ffffffff88011a38
=>  Loading section .dtors, size 0x8 lma ffffffff88011a40
=>  Loading section .rdata, size 0x23e0 lma ffffffff88011a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e30
=>  Loading section .data, size 0x480 lma ffffffff88013e48
=>  Start address ffffffff88000004
=>  Transfer rate: 660992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[370/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:362 W:0   | mipstx39/jmr3904: sp34.exe
Result: invalid   
Time: 0:00:00.263364 sp34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11990 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011990
=>  Loading section .init, size 0x48 lma ffffffff88011a00
=>  Loading section .fini, size 0x30 lma ffffffff88011a48
=>  Loading section .ctors, size 0x8 lma ffffffff88011a78
=>  Loading section .dtors, size 0x8 lma ffffffff88011a80
=>  Loading section .rdata, size 0x1f39 lma ffffffff88011a90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139d0
=>  Loading section .data, size 0x480 lma ffffffff880139e8
=>  Start address ffffffff88000004
=>  Transfer rate: 651976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[371/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:362 W:0   | mipstx39/jmr3904: sp35.exe
Result: invalid   
Time: 0:00:00.261581 sp35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17f80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017f80
=>  Loading section .init, size 0x48 lma ffffffff88017ff0
=>  Loading section .fini, size 0x30 lma ffffffff88018038
=>  Loading section .ctors, size 0x8 lma ffffffff88018068
=>  Loading section .dtors, size 0x8 lma ffffffff88018070
=>  Loading section .rdata, size 0x27b0 lma ffffffff88018080
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a830
=>  Loading section .data, size 0x5ec lma ffffffff8801a848
=>  Start address ffffffff88000004
=>  Transfer rate: 880992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[372/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:370 W:0   | mipstx39/jmr3904: sp37.exe
Result: invalid   
Time: 0:00:00.255950 sp37.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x133b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880133b0
=>  Loading section .init, size 0x48 lma ffffffff88013420
=>  Loading section .fini, size 0x30 lma ffffffff88013468
=>  Loading section .ctors, size 0x8 lma ffffffff88013498
=>  Loading section .dtors, size 0x8 lma ffffffff880134a0
=>  Loading section .rdata, size 0x279d lma ffffffff880134b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015c50
=>  Loading section .data, size 0x4a8 lma ffffffff88015c68
=>  Start address ffffffff88000004
=>  Transfer rate: 722984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[373/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:370 W:0   | mipstx39/jmr3904: sp38.exe
Result: invalid   
Time: 0:00:00.258897 sp38.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b00
=>  Loading section .init, size 0x48 lma ffffffff88010b70
=>  Loading section .fini, size 0x30 lma ffffffff88010bb8
=>  Loading section .ctors, size 0x8 lma ffffffff88010be8
=>  Loading section .dtors, size 0x8 lma ffffffff88010bf0
=>  Loading section .rdata, size 0x1e59 lma ffffffff88010c00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a60
=>  Loading section .data, size 0x480 lma ffffffff88012a78
=>  Start address ffffffff88000004
=>  Transfer rate: 620360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[374/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:370 W:0   | mipstx39/jmr3904: sp40.exe
Result: invalid   
Time: 0:00:00.256922 sp40.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c60
=>  Loading section .init, size 0x48 lma ffffffff88010cd0
=>  Loading section .fini, size 0x30 lma ffffffff88010d18
=>  Loading section .ctors, size 0x8 lma ffffffff88010d48
=>  Loading section .dtors, size 0x8 lma ffffffff88010d50
=>  Loading section .rdata, size 0x20b9 lma ffffffff88010d60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e20
=>  Loading section .data, size 0x498 lma ffffffff88012e38
=>  Start address ffffffff88000004
=>  Transfer rate: 628232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[375/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:370 W:0   | mipstx39/jmr3904: sp41.exe
Result: invalid   
Time: 0:00:00.264377 sp41.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10260 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010260
=>  Loading section .init, size 0x48 lma ffffffff880102d0
=>  Loading section .fini, size 0x30 lma ffffffff88010318
=>  Loading section .ctors, size 0x8 lma ffffffff88010348
=>  Loading section .dtors, size 0x8 lma ffffffff88010350
=>  Loading section .rdata, size 0x1ac1 lma ffffffff88010360
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e28
=>  Loading section .data, size 0x450 lma ffffffff88011e40
=>  Start address ffffffff88000004
=>  Transfer rate: 594952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[376/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:370 W:0   | mipstx39/jmr3904: sp42.exe
Result: invalid   
Time: 0:00:00.263032 sp42.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12a80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012a80
=>  Loading section .init, size 0x48 lma ffffffff88012af0
=>  Loading section .fini, size 0x30 lma ffffffff88012b38
=>  Loading section .ctors, size 0x8 lma ffffffff88012b68
=>  Loading section .dtors, size 0x8 lma ffffffff88012b70
=>  Loading section .rdata, size 0x22a4 lma ffffffff88012b80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014e28
=>  Loading section .data, size 0x5d0 lma ffffffff88014e40
=>  Start address ffffffff88000004
=>  Transfer rate: 696352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[377/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:370 W:0   | mipstx39/jmr3904: sp43.exe
Result: invalid   
Time: 0:00:00.259503 sp43.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12a00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012a00
=>  Loading section .init, size 0x48 lma ffffffff88012a70
=>  Loading section .fini, size 0x30 lma ffffffff88012ab8
=>  Loading section .ctors, size 0x8 lma ffffffff88012ae8
=>  Loading section .dtors, size 0x8 lma ffffffff88012af0
=>  Loading section .rdata, size 0x2f78 lma ffffffff88012b00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015a78
=>  Loading section .data, size 0x4b0 lma ffffffff88015a90
=>  Start address ffffffff88000004
=>  Transfer rate: 719296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[378/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:370 W:0   | mipstx39/jmr3904: sp44.exe
Result: invalid   
Time: 0:00:00.265921 sp44.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109a0
=>  Loading section .init, size 0x48 lma ffffffff88010a10
=>  Loading section .fini, size 0x30 lma ffffffff88010a58
=>  Loading section .ctors, size 0x8 lma ffffffff88010a88
=>  Loading section .dtors, size 0x8 lma ffffffff88010a90
=>  Loading section .rdata, size 0x1e34 lma ffffffff88010aa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128d8
=>  Loading section .data, size 0x450 lma ffffffff880128f0
=>  Start address ffffffff88000004
=>  Transfer rate: 616864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[379/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:370 W:0   | mipstx39/jmr3904: sp45.exe
Result: invalid   
Time: 0:00:00.266298 sp45.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10fc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010fc0
=>  Loading section .init, size 0x48 lma ffffffff88011030
=>  Loading section .fini, size 0x30 lma ffffffff88011078
=>  Loading section .ctors, size 0x8 lma ffffffff880110a8
=>  Loading section .dtors, size 0x8 lma ffffffff880110b0
=>  Loading section .rdata, size 0x1fc1 lma ffffffff880110c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013088
=>  Loading section .data, size 0x480 lma ffffffff880130a0
=>  Start address ffffffff88000004
=>  Transfer rate: 632968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[380/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:378 W:0   | mipstx39/jmr3904: sp46.exe
Result: invalid   
Time: 0:00:00.255863 sp46.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11080 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011080
=>  Loading section .init, size 0x48 lma ffffffff880110f0
=>  Loading section .fini, size 0x30 lma ffffffff88011138
=>  Loading section .ctors, size 0x8 lma ffffffff88011168
=>  Loading section .dtors, size 0x8 lma ffffffff88011170
=>  Loading section .rdata, size 0x1e71 lma ffffffff88011180
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ff8
=>  Loading section .data, size 0x480 lma ffffffff88013010
=>  Start address ffffffff88000004
=>  Transfer rate: 631816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[381/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:378 W:0   | mipstx39/jmr3904: sp47.exe
Result: invalid   
Time: 0:00:00.258015 sp47.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105f0
=>  Loading section .init, size 0x48 lma ffffffff88010660
=>  Loading section .fini, size 0x30 lma ffffffff880106a8
=>  Loading section .ctors, size 0x8 lma ffffffff880106d8
=>  Loading section .dtors, size 0x8 lma ffffffff880106e0
=>  Loading section .rdata, size 0x1a14 lma ffffffff880106f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012108
=>  Loading section .data, size 0x450 lma ffffffff88012120
=>  Start address ffffffff88000004
=>  Transfer rate: 600864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[382/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:378 W:0   | mipstx39/jmr3904: sp48.exe
Result: invalid   
Time: 0:00:00.256422 sp48.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103e0
=>  Loading section .init, size 0x48 lma ffffffff88010450
=>  Loading section .fini, size 0x30 lma ffffffff88010498
=>  Loading section .ctors, size 0x8 lma ffffffff880104c8
=>  Loading section .dtors, size 0x8 lma ffffffff880104d0
=>  Loading section .rdata, size 0x1ea8 lma ffffffff880104e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012388
=>  Loading section .data, size 0x470 lma ffffffff880123a0
=>  Start address ffffffff88000004
=>  Transfer rate: 606272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[383/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:378 W:0   | mipstx39/jmr3904: sp49.exe
Result: invalid   
Time: 0:00:00.280484 sp49.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fb90
=>  Loading section .init, size 0x48 lma ffffffff8800fc00
=>  Loading section .fini, size 0x30 lma ffffffff8800fc48
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc78
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc80
=>  Loading section .rdata, size 0x1e25 lma ffffffff8800fc90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ab8
=>  Loading section .data, size 0x470 lma ffffffff88011ad0
=>  Start address ffffffff88000004
=>  Transfer rate: 588200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[384/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:378 W:0   | mipstx39/jmr3904: sp50.exe
Result: invalid   
Time: 0:00:00.264658 sp50.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f20
=>  Loading section .init, size 0x48 lma ffffffff88010f90
=>  Loading section .fini, size 0x30 lma ffffffff88010fd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011008
=>  Loading section .dtors, size 0x8 lma ffffffff88011010
=>  Loading section .rdata, size 0x1e0d lma ffffffff88011020
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e30
=>  Loading section .data, size 0x480 lma ffffffff88012e48
=>  Start address ffffffff88000004
=>  Transfer rate: 628200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[385/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:378 W:0   | mipstx39/jmr3904: sp51.exe
Result: invalid   
Time: 0:00:00.265999 sp51.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d40
=>  Loading section .init, size 0x48 lma ffffffff88010db0
=>  Loading section .fini, size 0x30 lma ffffffff88010df8
=>  Loading section .ctors, size 0x8 lma ffffffff88010e28
=>  Loading section .dtors, size 0x8 lma ffffffff88010e30
=>  Loading section .rdata, size 0x1f3d lma ffffffff88010e40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d80
=>  Loading section .data, size 0x470 lma ffffffff88012d98
=>  Start address ffffffff88000004
=>  Transfer rate: 626664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[386/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:378 W:0   | mipstx39/jmr3904: sp52.exe
Result: invalid   
Time: 0:00:00.254639 sp52.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011690
=>  Loading section .init, size 0x48 lma ffffffff88011700
=>  Loading section .fini, size 0x30 lma ffffffff88011748
=>  Loading section .ctors, size 0x8 lma ffffffff88011778
=>  Loading section .dtors, size 0x8 lma ffffffff88011780
=>  Loading section .rdata, size 0x1f4d lma ffffffff88011790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136e0
=>  Loading section .data, size 0x4a8 lma ffffffff880136f8
=>  Start address ffffffff88000004
=>  Transfer rate: 646312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[387/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:378 W:0   | mipstx39/jmr3904: sp53.exe
Result: invalid   
Time: 0:00:00.264386 sp53.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011d30
=>  Loading section .init, size 0x48 lma ffffffff88011da0
=>  Loading section .fini, size 0x30 lma ffffffff88011de8
=>  Loading section .ctors, size 0x8 lma ffffffff88011e18
=>  Loading section .dtors, size 0x8 lma ffffffff88011e20
=>  Loading section .rdata, size 0x1f75 lma ffffffff88011e30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013da8
=>  Loading section .data, size 0x4a8 lma ffffffff88013dc0
=>  Start address ffffffff88000004
=>  Transfer rate: 660200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[388/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:386 W:0   | mipstx39/jmr3904: sp54.exe
Result: invalid   
Time: 0:00:00.262926 sp54.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f2c0
=>  Loading section .init, size 0x48 lma ffffffff8800f330
=>  Loading section .fini, size 0x30 lma ffffffff8800f378
=>  Loading section .ctors, size 0x8 lma ffffffff8800f3a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f3b0
=>  Loading section .rdata, size 0x1e30 lma ffffffff8800f3c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880111f0
=>  Loading section .data, size 0x580 lma ffffffff88011208
=>  Start address ffffffff88000004
=>  Transfer rate: 572416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[389/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:386 W:0   | mipstx39/jmr3904: sp55.exe
Result: invalid   
Time: 0:00:00.263784 sp55.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010420
=>  Loading section .init, size 0x48 lma ffffffff88010490
=>  Loading section .fini, size 0x30 lma ffffffff880104d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010508
=>  Loading section .dtors, size 0x8 lma ffffffff88010510
=>  Loading section .rdata, size 0x1f05 lma ffffffff88010520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012428
=>  Loading section .data, size 0x470 lma ffffffff88012440
=>  Start address ffffffff88000004
=>  Transfer rate: 607528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[390/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:386 W:0   | mipstx39/jmr3904: sp56.exe
Result: invalid   
Time: 0:00:00.252064 sp56.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf9a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f9a0
=>  Loading section .init, size 0x48 lma ffffffff8800fa10
=>  Loading section .fini, size 0x30 lma ffffffff8800fa58
=>  Loading section .ctors, size 0x8 lma ffffffff8800fa88
=>  Loading section .dtors, size 0x8 lma ffffffff8800fa90
=>  Loading section .rdata, size 0x1e4d lma ffffffff8800faa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118f0
=>  Loading section .data, size 0x490 lma ffffffff88011908
=>  Start address ffffffff88000004
=>  Transfer rate: 584808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[391/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:386 W:0   | mipstx39/jmr3904: sp57.exe
Result: invalid   
Time: 0:00:00.291126 sp57.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10800 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010800
=>  Loading section .init, size 0x48 lma ffffffff88010870
=>  Loading section .fini, size 0x30 lma ffffffff880108b8
=>  Loading section .ctors, size 0x8 lma ffffffff880108e8
=>  Loading section .dtors, size 0x8 lma ffffffff880108f0
=>  Loading section .rdata, size 0x1ef1 lma ffffffff88010900
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127f8
=>  Loading section .data, size 0x450 lma ffffffff88012810
=>  Start address ffffffff88000004
=>  Transfer rate: 615048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[392/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:386 W:0   | mipstx39/jmr3904: sp58.exe
Result: invalid   
Time: 0:00:00.291343 sp58.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf730 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f730
=>  Loading section .init, size 0x48 lma ffffffff8800f7a0
=>  Loading section .fini, size 0x30 lma ffffffff8800f7e8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f818
=>  Loading section .dtors, size 0x8 lma ffffffff8800f820
=>  Loading section .rdata, size 0x1a45 lma ffffffff8800f830
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011278
=>  Loading section .data, size 0x440 lma ffffffff88011290
=>  Start address ffffffff88000004
=>  Transfer rate: 570920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[393/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:386 W:0   | mipstx39/jmr3904: sp59.exe
Result: invalid   
Time: 0:00:00.271328 sp59.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f70
=>  Loading section .init, size 0x48 lma ffffffff88010fe0
=>  Loading section .fini, size 0x30 lma ffffffff88011028
=>  Loading section .ctors, size 0x8 lma ffffffff88011058
=>  Loading section .dtors, size 0x8 lma ffffffff88011060
=>  Loading section .rdata, size 0x2039 lma ffffffff88011070
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130b0
=>  Loading section .data, size 0x480 lma ffffffff880130c8
=>  Start address ffffffff88000004
=>  Transfer rate: 633288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[394/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:386 W:0   | mipstx39/jmr3904: sp60.exe
Result: invalid   
Time: 0:00:00.261238 sp60.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d20
=>  Loading section .init, size 0x48 lma ffffffff88010d90
=>  Loading section .fini, size 0x30 lma ffffffff88010dd8
=>  Loading section .ctors, size 0x8 lma ffffffff88010e08
=>  Loading section .dtors, size 0x8 lma ffffffff88010e10
=>  Loading section .rdata, size 0x1f31 lma ffffffff88010e20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d58
=>  Loading section .data, size 0x480 lma ffffffff88012d70
=>  Start address ffffffff88000004
=>  Transfer rate: 626440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[395/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:386 W:0   | mipstx39/jmr3904: sp62.exe
Result: invalid   
Time: 0:00:00.256955 sp62.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11bb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011bb0
=>  Loading section .init, size 0x48 lma ffffffff88011c20
=>  Loading section .fini, size 0x30 lma ffffffff88011c68
=>  Loading section .ctors, size 0x8 lma ffffffff88011c98
=>  Loading section .dtors, size 0x8 lma ffffffff88011ca0
=>  Loading section .rdata, size 0x2030 lma ffffffff88011cb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ce0
=>  Loading section .data, size 0x48c lma ffffffff88013cf8
=>  Start address ffffffff88000004
=>  Transfer rate: 658400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[396/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:394 W:0   | mipstx39/jmr3904: sp63.exe
Result: invalid   
Time: 0:00:00.257267 sp63.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f930
=>  Loading section .init, size 0x48 lma ffffffff8800f9a0
=>  Loading section .fini, size 0x30 lma ffffffff8800f9e8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fa18
=>  Loading section .dtors, size 0x8 lma ffffffff8800fa20
=>  Loading section .rdata, size 0x1b05 lma ffffffff8800fa30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011538
=>  Loading section .data, size 0x440 lma ffffffff88011550
=>  Start address ffffffff88000004
=>  Transfer rate: 576552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[397/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:394 W:0   | mipstx39/jmr3904: sp64.exe
Result: invalid   
Time: 0:00:00.257704 sp64.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x108d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880108d0
=>  Loading section .init, size 0x48 lma ffffffff88010940
=>  Loading section .fini, size 0x30 lma ffffffff88010988
=>  Loading section .ctors, size 0x8 lma ffffffff880109b8
=>  Loading section .dtors, size 0x8 lma ffffffff880109c0
=>  Loading section .rdata, size 0x1b39 lma ffffffff880109d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012510
=>  Loading section .data, size 0x4a0 lma ffffffff88012528
=>  Start address ffffffff88000004
=>  Transfer rate: 609736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[398/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:394 W:0   | mipstx39/jmr3904: sp65.exe
Result: invalid   
Time: 0:00:00.260023 sp65.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12330 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012330
=>  Loading section .init, size 0x48 lma ffffffff880123a0
=>  Loading section .fini, size 0x30 lma ffffffff880123e8
=>  Loading section .ctors, size 0x8 lma ffffffff88012418
=>  Loading section .dtors, size 0x8 lma ffffffff88012420
=>  Loading section .rdata, size 0x1f08 lma ffffffff88012430
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014338
=>  Loading section .data, size 0x48c lma ffffffff88014350
=>  Start address ffffffff88000004
=>  Transfer rate: 671392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[399/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:394 W:0   | mipstx39/jmr3904: sp66.exe
Result: invalid   
Time: 0:00:00.275295 sp66.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12330 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012330
=>  Loading section .init, size 0x48 lma ffffffff880123a0
=>  Loading section .fini, size 0x30 lma ffffffff880123e8
=>  Loading section .ctors, size 0x8 lma ffffffff88012418
=>  Loading section .dtors, size 0x8 lma ffffffff88012420
=>  Loading section .rdata, size 0x1f10 lma ffffffff88012430
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014340
=>  Loading section .data, size 0x48c lma ffffffff88014358
=>  Start address ffffffff88000004
=>  Transfer rate: 671456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[400/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:394 W:0   | mipstx39/jmr3904: sp67.exe
Result: invalid   
Time: 0:00:00.258712 sp67.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d80
=>  Loading section .init, size 0x48 lma ffffffff88010df0
=>  Loading section .fini, size 0x30 lma ffffffff88010e38
=>  Loading section .ctors, size 0x8 lma ffffffff88010e68
=>  Loading section .dtors, size 0x8 lma ffffffff88010e70
=>  Loading section .rdata, size 0x1ee1 lma ffffffff88010e80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d68
=>  Loading section .data, size 0x480 lma ffffffff88012d80
=>  Start address ffffffff88000004
=>  Transfer rate: 626568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[401/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:394 W:0   | mipstx39/jmr3904: sp68.exe
Result: invalid   
Time: 0:00:00.257508 sp68.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014060
=>  Loading section .init, size 0x48 lma ffffffff880140e0
=>  Loading section .fini, size 0x30 lma ffffffff88014128
=>  Loading section .ctors, size 0x8 lma ffffffff88014158
=>  Loading section .dtors, size 0x8 lma ffffffff88014160
=>  Loading section .rdata, size 0x2295 lma ffffffff88014170
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016408
=>  Loading section .data, size 0x540 lma ffffffff88016420
=>  Start address ffffffff88000004
=>  Transfer rate: 740008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[402/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:394 W:0   | mipstx39/jmr3904: sp69.exe
Result: invalid   
Time: 0:00:00.264363 sp69.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x116a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880116a0
=>  Loading section .init, size 0x48 lma ffffffff88011710
=>  Loading section .fini, size 0x30 lma ffffffff88011758
=>  Loading section .ctors, size 0x8 lma ffffffff88011788
=>  Loading section .dtors, size 0x8 lma ffffffff88011790
=>  Loading section .rdata, size 0x2279 lma ffffffff880117a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a20
=>  Loading section .data, size 0x480 lma ffffffff88013a38
=>  Start address ffffffff88000004
=>  Transfer rate: 652616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[403/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:394 W:0   | mipstx39/jmr3904: sp70.exe
Result: invalid   
Time: 0:00:00.276187 sp70.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10dd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010dd0
=>  Loading section .init, size 0x48 lma ffffffff88010e40
=>  Loading section .fini, size 0x30 lma ffffffff88010e88
=>  Loading section .ctors, size 0x8 lma ffffffff88010eb8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ec0
=>  Loading section .rdata, size 0x1de0 lma ffffffff88010ed0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cb0
=>  Loading section .data, size 0x450 lma ffffffff88012cc8
=>  Start address ffffffff88000004
=>  Transfer rate: 624768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[404/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:402 W:0   | mipstx39/jmr3904: sp71.exe
Result: invalid   
Time: 0:00:00.259842 sp71.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fc40
=>  Loading section .init, size 0x48 lma ffffffff8800fcb0
=>  Loading section .fini, size 0x30 lma ffffffff8800fcf8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fd28
=>  Loading section .dtors, size 0x8 lma ffffffff8800fd30
=>  Loading section .rdata, size 0x1df0 lma ffffffff8800fd40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b30
=>  Loading section .data, size 0x470 lma ffffffff88011b48
=>  Start address ffffffff88000004
=>  Transfer rate: 589184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[405/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:402 W:0   | mipstx39/jmr3904: sp72.exe
Result: invalid   
Time: 0:00:00.262118 sp72.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11380 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011380
=>  Loading section .init, size 0x48 lma ffffffff880113f0
=>  Loading section .fini, size 0x30 lma ffffffff88011438
=>  Loading section .ctors, size 0x8 lma ffffffff88011468
=>  Loading section .dtors, size 0x8 lma ffffffff88011470
=>  Loading section .rdata, size 0x1eb1 lma ffffffff88011480
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013338
=>  Loading section .data, size 0x480 lma ffffffff88013350
=>  Start address ffffffff88000004
=>  Transfer rate: 638472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[406/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:402 W:0   | mipstx39/jmr3904: sp73.exe
Result: invalid   
Time: 0:00:00.265483 sp73.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11700 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011700
=>  Loading section .init, size 0x48 lma ffffffff88011770
=>  Loading section .fini, size 0x30 lma ffffffff880117b8
=>  Loading section .ctors, size 0x8 lma ffffffff880117e8
=>  Loading section .dtors, size 0x8 lma ffffffff880117f0
=>  Loading section .rdata, size 0x1fe0 lma ffffffff88011800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137e0
=>  Loading section .data, size 0x478 lma ffffffff880137f8
=>  Start address ffffffff88000004
=>  Transfer rate: 648000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[407/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:402 W:0   | mipstx39/jmr3904: sp74.exe
Result: invalid   
Time: 0:00:00.270583 sp74.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f690
=>  Loading section .init, size 0x48 lma ffffffff8800f700
=>  Loading section .fini, size 0x30 lma ffffffff8800f748
=>  Loading section .ctors, size 0x8 lma ffffffff8800f778
=>  Loading section .dtors, size 0x8 lma ffffffff8800f780
=>  Loading section .rdata, size 0x1e1d lma ffffffff8800f790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880115b0
=>  Loading section .data, size 0x440 lma ffffffff880115c8
=>  Start address ffffffff88000004
=>  Transfer rate: 577512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[408/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:402 W:0   | mipstx39/jmr3904: sp75.exe
Result: invalid   
Time: 0:00:00.255579 sp75.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10bb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010bb0
=>  Loading section .init, size 0x48 lma ffffffff88010c20
=>  Loading section .fini, size 0x30 lma ffffffff88010c68
=>  Loading section .ctors, size 0x8 lma ffffffff88010c98
=>  Loading section .dtors, size 0x8 lma ffffffff88010ca0
=>  Loading section .rdata, size 0x1e09 lma ffffffff88010cb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ac0
=>  Loading section .data, size 0x480 lma ffffffff88012ad8
=>  Start address ffffffff88000004
=>  Transfer rate: 621128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[409/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:402 W:0   | mipstx39/jmr3904: sp76.exe
Result: invalid   
Time: 0:00:00.255446 sp76.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ffc0
=>  Loading section .init, size 0x48 lma ffffffff88010030
=>  Loading section .fini, size 0x30 lma ffffffff88010078
=>  Loading section .ctors, size 0x8 lma ffffffff880100a8
=>  Loading section .dtors, size 0x8 lma ffffffff880100b0
=>  Loading section .rdata, size 0x1fd4 lma ffffffff880100c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012098
=>  Loading section .data, size 0x440 lma ffffffff880120b0
=>  Start address ffffffff88000004
=>  Transfer rate: 599840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[410/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:402 W:0   | mipstx39/jmr3904: sp77.exe
Result: invalid   
Time: 0:00:00.259161 sp77.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10510 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010510
=>  Loading section .init, size 0x48 lma ffffffff88010580
=>  Loading section .fini, size 0x30 lma ffffffff880105c8
=>  Loading section .ctors, size 0x8 lma ffffffff880105f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010600
=>  Loading section .rdata, size 0x1d05 lma ffffffff88010610
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012318
=>  Loading section .data, size 0x480 lma ffffffff88012330
=>  Start address ffffffff88000004
=>  Transfer rate: 605480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[411/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:402 W:0   | mipstx39/jmr3904: spassoc01.exe
Result: invalid   
Time: 0:00:00.260941 spassoc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110d0
=>  Loading section .init, size 0x48 lma ffffffff88011140
=>  Loading section .fini, size 0x30 lma ffffffff88011188
=>  Loading section .ctors, size 0x8 lma ffffffff880111b8
=>  Loading section .dtors, size 0x8 lma ffffffff880111c0
=>  Loading section .rdata, size 0x21b5 lma ffffffff880111d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013388
=>  Loading section .data, size 0x478 lma ffffffff880133a0
=>  Start address ffffffff88000004
=>  Transfer rate: 639080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[412/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:410 W:0   | mipstx39/jmr3904: spatomic01.exe
Result: invalid   
Time: 0:00:00.259338 spatomic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10080 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010080
=>  Loading section .init, size 0x48 lma ffffffff880100f0
=>  Loading section .fini, size 0x30 lma ffffffff88010138
=>  Loading section .ctors, size 0x8 lma ffffffff88010168
=>  Loading section .dtors, size 0x8 lma ffffffff88010170
=>  Loading section .rdata, size 0x1d11 lma ffffffff88010180
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e98
=>  Loading section .data, size 0x448 lma ffffffff88011eb0
=>  Start address ffffffff88000004
=>  Transfer rate: 595784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[413/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:410 W:0   | mipstx39/jmr3904: spcache01.exe
Result: invalid   
Time: 0:00:00.254833 spcache01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x124a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880124a0
=>  Loading section .init, size 0x48 lma ffffffff88012510
=>  Loading section .fini, size 0x30 lma ffffffff88012558
=>  Loading section .ctors, size 0x8 lma ffffffff88012588
=>  Loading section .dtors, size 0x8 lma ffffffff88012590
=>  Loading section .rdata, size 0x2151 lma ffffffff880125a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880146f8
=>  Loading section .data, size 0x450 lma ffffffff88014710
=>  Start address ffffffff88000004
=>  Transfer rate: 678536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[414/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:410 W:0   | mipstx39/jmr3904: spcbssched01.exe
Result: invalid   
Time: 0:00:00.254264 spcbssched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c30
=>  Loading section .init, size 0x48 lma ffffffff88011ca0
=>  Loading section .fini, size 0x30 lma ffffffff88011ce8
=>  Loading section .ctors, size 0x8 lma ffffffff88011d18
=>  Loading section .dtors, size 0x8 lma ffffffff88011d20
=>  Loading section .rdata, size 0x20b4 lma ffffffff88011d30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013de8
=>  Loading section .data, size 0x5f8 lma ffffffff88013e00
=>  Start address ffffffff88000004
=>  Transfer rate: 663392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[415/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:410 W:0   | mipstx39/jmr3904: spcbssched02.exe
Result: invalid   
Time: 0:00:00.254421 spcbssched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13630 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013630
=>  Loading section .init, size 0x48 lma ffffffff880136a0
=>  Loading section .fini, size 0x30 lma ffffffff880136e8
=>  Loading section .ctors, size 0x8 lma ffffffff88013718
=>  Loading section .dtors, size 0x8 lma ffffffff88013720
=>  Loading section .rdata, size 0x2698 lma ffffffff88013730
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015dc8
=>  Loading section .data, size 0x480 lma ffffffff88015de0
=>  Start address ffffffff88000004
=>  Transfer rate: 725696 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[416/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:410 W:0   | mipstx39/jmr3904: spcbssched03.exe
Result: invalid   
Time: 0:00:00.259781 spcbssched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x130d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880130d0
=>  Loading section .init, size 0x48 lma ffffffff88013140
=>  Loading section .fini, size 0x30 lma ffffffff88013188
=>  Loading section .ctors, size 0x8 lma ffffffff880131b8
=>  Loading section .dtors, size 0x8 lma ffffffff880131c0
=>  Loading section .rdata, size 0x21e4 lma ffffffff880131d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880153b8
=>  Loading section .data, size 0x4e8 lma ffffffff880153d0
=>  Start address ffffffff88000004
=>  Transfer rate: 705888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[417/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:410 W:0   | mipstx39/jmr3904: spchain.exe
Result: invalid   
Time: 0:00:00.256349 spchain.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119c0
=>  Loading section .init, size 0x48 lma ffffffff88011a30
=>  Loading section .fini, size 0x30 lma ffffffff88011a78
=>  Loading section .ctors, size 0x8 lma ffffffff88011aa8
=>  Loading section .dtors, size 0x8 lma ffffffff88011ab0
=>  Loading section .rdata, size 0x2151 lma ffffffff88011ac0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c18
=>  Loading section .data, size 0x470 lma ffffffff88013c30
=>  Start address ffffffff88000004
=>  Transfer rate: 656520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[418/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:410 W:0   | mipstx39/jmr3904: spclock_err01.exe
Result: invalid   
Time: 0:00:00.256333 spclock_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011f90
=>  Loading section .init, size 0x48 lma ffffffff88012000
=>  Loading section .fini, size 0x30 lma ffffffff88012048
=>  Loading section .ctors, size 0x8 lma ffffffff88012078
=>  Loading section .dtors, size 0x8 lma ffffffff88012080
=>  Loading section .rdata, size 0x2439 lma ffffffff88012090
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880144d0
=>  Loading section .data, size 0x478 lma ffffffff880144e8
=>  Start address ffffffff88000004
=>  Transfer rate: 674440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[419/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:410 W:0   | mipstx39/jmr3904: spclock_err02.exe
Result: invalid   
Time: 0:00:00.257763 spclock_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ac0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ac0
=>  Loading section .init, size 0x48 lma ffffffff88011b30
=>  Loading section .fini, size 0x30 lma ffffffff88011b78
=>  Loading section .ctors, size 0x8 lma ffffffff88011ba8
=>  Loading section .dtors, size 0x8 lma ffffffff88011bb0
=>  Loading section .rdata, size 0x20c5 lma ffffffff88011bc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c88
=>  Loading section .data, size 0x478 lma ffffffff88013ca0
=>  Start address ffffffff88000004
=>  Transfer rate: 657512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[420/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:418 W:0   | mipstx39/jmr3904: spclock_todhook01.exe
Result: invalid   
Time: 0:00:00.256017 spclock_todhook01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15f30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015f30
=>  Loading section .init, size 0x48 lma ffffffff88015fa0
=>  Loading section .fini, size 0x30 lma ffffffff88015fe8
=>  Loading section .ctors, size 0x8 lma ffffffff88016018
=>  Loading section .dtors, size 0x8 lma ffffffff88016020
=>  Loading section .rdata, size 0x2614 lma ffffffff88016030
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018648
=>  Loading section .data, size 0x7d8 lma ffffffff88018660
=>  Start address ffffffff88000004
=>  Transfer rate: 815456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[421/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:418 W:0   | mipstx39/jmr3904: spconfig01.exe
Result: invalid   
Time: 0:00:00.257072 spconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f2a0
=>  Loading section .init, size 0x48 lma ffffffff8800f310
=>  Loading section .fini, size 0x30 lma ffffffff8800f358
=>  Loading section .ctors, size 0x8 lma ffffffff8800f388
=>  Loading section .dtors, size 0x8 lma ffffffff8800f390
=>  Loading section .rdata, size 0x1a15 lma ffffffff8800f3a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010db8
=>  Loading section .data, size 0x4d4 lma ffffffff88010dd0
=>  Start address ffffffff88000004
=>  Transfer rate: 562376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[422/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:418 W:0   | mipstx39/jmr3904: spconfig02.exe
Result: invalid   
Time: 0:00:00.261365 spconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xc070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800c070
=>  Loading section .init, size 0x48 lma ffffffff8800c0f0
=>  Loading section .fini, size 0x30 lma ffffffff8800c138
=>  Loading section .ctors, size 0x8 lma ffffffff8800c168
=>  Loading section .dtors, size 0x8 lma ffffffff8800c170
=>  Loading section .rdata, size 0x15b0 lma ffffffff8800c180
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800d730
=>  Loading section .data, size 0x334 lma ffffffff8800d748
=>  Start address ffffffff88000004
=>  Transfer rate: 447392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[423/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:418 W:0   | mipstx39/jmr3904: spconsole01.exe
Result: invalid   
Time: 0:00:00.259342 spconsole01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e850 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e850
=>  Loading section .init, size 0x48 lma ffffffff8801e8c0
=>  Loading section .fini, size 0x30 lma ffffffff8801e908
=>  Loading section .ctors, size 0x8 lma ffffffff8801e938
=>  Loading section .dtors, size 0x8 lma ffffffff8801e940
=>  Loading section .rdata, size 0x240c lma ffffffff8801e950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020d60
=>  Loading section .data, size 0x618 lma ffffffff88020d78
=>  Start address ffffffff88000004
=>  Transfer rate: 1088544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[424/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:418 W:0   | mipstx39/jmr3904: spcontext01.exe
Result: invalid   
Time: 0:00:00.262844 spcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880114c0
=>  Loading section .init, size 0x48 lma ffffffff88011530
=>  Loading section .fini, size 0x30 lma ffffffff88011578
=>  Loading section .ctors, size 0x8 lma ffffffff880115a8
=>  Loading section .dtors, size 0x8 lma ffffffff880115b0
=>  Loading section .rdata, size 0x1a49 lma ffffffff880115c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013010
=>  Loading section .data, size 0x480 lma ffffffff88013028
=>  Start address ffffffff88000004
=>  Transfer rate: 632008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[425/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:418 W:0   | mipstx39/jmr3904: spcpucounter01.exe
Result: invalid   
Time: 0:00:00.252095 spcpucounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18d30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018d30
=>  Loading section .init, size 0x48 lma ffffffff88018da0
=>  Loading section .fini, size 0x30 lma ffffffff88018de8
=>  Loading section .ctors, size 0x8 lma ffffffff88018e18
=>  Loading section .dtors, size 0x8 lma ffffffff88018e20
=>  Loading section .rdata, size 0x22a8 lma ffffffff88018e30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b0d8
=>  Loading section .data, size 0x5e4 lma ffffffff8801b0f0
=>  Start address ffffffff88000004
=>  Transfer rate: 898656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[426/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:418 W:0   | mipstx39/jmr3904: spcpuset01.exe
Result: invalid   
Time: 0:00:00.254266 spcpuset01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfbf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fbf0
=>  Loading section .init, size 0x48 lma ffffffff8800fc60
=>  Loading section .fini, size 0x30 lma ffffffff8800fca8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fcd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fce0
=>  Loading section .rdata, size 0x1b6c lma ffffffff8800fcf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011860
=>  Loading section .data, size 0x440 lma ffffffff88011878
=>  Start address ffffffff88000004
=>  Transfer rate: 583008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[427/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:418 W:0   | mipstx39/jmr3904: spcxx01.exe
Result: invalid   
Time: 0:00:00.264000 spcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x320c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880320c0
=>  Loading section .init, size 0x48 lma ffffffff88032140
=>  Loading section .fini, size 0x30 lma ffffffff88032188
=>  Loading section .ctors, size 0x24 lma ffffffff880321b8
=>  Loading section .dtors, size 0x8 lma ffffffff880321dc
=>  Loading section .rdata, size 0x543c lma ffffffff880321f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88037630
=>  Loading section .rel.dyn, size 0x20 lma ffffffff88037648
=>  Loading section .data, size 0x6f0 lma ffffffff88037668
=>  Loading section .sdata, size 0x4 lma ffffffff88037d58
=>  Start address ffffffff88000004
=>  Transfer rate: 1829472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[428/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:426 W:0   | mipstx39/jmr3904: spedfsched01.exe
Result: invalid   
Time: 0:00:00.263013 spedfsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ab0
=>  Loading section .init, size 0x48 lma ffffffff88011b20
=>  Loading section .fini, size 0x30 lma ffffffff88011b68
=>  Loading section .ctors, size 0x8 lma ffffffff88011b98
=>  Loading section .dtors, size 0x8 lma ffffffff88011ba0
=>  Loading section .rdata, size 0x20b4 lma ffffffff88011bb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c68
=>  Loading section .data, size 0x5f8 lma ffffffff88013c80
=>  Start address ffffffff88000004
=>  Transfer rate: 660320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[429/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:426 W:0   | mipstx39/jmr3904: spedfsched02.exe
Result: invalid   
Time: 0:00:00.258888 spedfsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12d40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012d40
=>  Loading section .init, size 0x48 lma ffffffff88012db0
=>  Loading section .fini, size 0x30 lma ffffffff88012df8
=>  Loading section .ctors, size 0x8 lma ffffffff88012e28
=>  Loading section .dtors, size 0x8 lma ffffffff88012e30
=>  Loading section .rdata, size 0x21a0 lma ffffffff88012e40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014fe0
=>  Loading section .data, size 0x4d0 lma ffffffff88014ff8
=>  Start address ffffffff88000004
=>  Transfer rate: 697856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[430/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:426 W:0   | mipstx39/jmr3904: spedfsched03.exe
Result: invalid   
Time: 0:00:00.263196 spedfsched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12750 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012750
=>  Loading section .init, size 0x48 lma ffffffff880127c0
=>  Loading section .fini, size 0x30 lma ffffffff88012808
=>  Loading section .ctors, size 0x8 lma ffffffff88012838
=>  Loading section .dtors, size 0x8 lma ffffffff88012840
=>  Loading section .rdata, size 0x20cc lma ffffffff88012850
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014920
=>  Loading section .data, size 0x4e8 lma ffffffff88014938
=>  Start address ffffffff88000004
=>  Transfer rate: 684192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[431/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:426 W:0   | mipstx39/jmr3904: spedfsched04.exe
Result: invalid   
Time: 0:00:00.258772 spedfsched04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11820 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011820
=>  Loading section .init, size 0x48 lma ffffffff88011890
=>  Loading section .fini, size 0x30 lma ffffffff880118d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011908
=>  Loading section .dtors, size 0x8 lma ffffffff88011910
=>  Loading section .rdata, size 0x1f61 lma ffffffff88011920
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013888
=>  Loading section .data, size 0x480 lma ffffffff880138a0
=>  Start address ffffffff88000004
=>  Transfer rate: 649352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[432/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:426 W:0   | mipstx39/jmr3904: sperror01.exe
Result: invalid   
Time: 0:00:00.257724 sperror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x197b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880197b0
=>  Loading section .init, size 0x48 lma ffffffff88019820
=>  Loading section .fini, size 0x30 lma ffffffff88019868
=>  Loading section .ctors, size 0x8 lma ffffffff88019898
=>  Loading section .dtors, size 0x8 lma ffffffff880198a0
=>  Loading section .rdata, size 0x2f0c lma ffffffff880198b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c7c0
=>  Loading section .data, size 0x5c8 lma ffffffff8801c7d8
=>  Start address ffffffff88000004
=>  Transfer rate: 945312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[433/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:426 W:0   | mipstx39/jmr3904: sperror02.exe
Result: invalid   
Time: 0:00:00.254531 sperror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19730 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019730
=>  Loading section .init, size 0x48 lma ffffffff880197a0
=>  Loading section .fini, size 0x30 lma ffffffff880197e8
=>  Loading section .ctors, size 0x8 lma ffffffff88019818
=>  Loading section .dtors, size 0x8 lma ffffffff88019820
=>  Loading section .rdata, size 0x2e84 lma ffffffff88019830
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c6b8
=>  Loading section .data, size 0x5c8 lma ffffffff8801c6d0
=>  Start address ffffffff88000004
=>  Transfer rate: 943200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[434/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:426 W:0   | mipstx39/jmr3904: sperror03.exe
Result: invalid   
Time: 0:00:00.262135 sperror03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ff90
=>  Loading section .init, size 0x48 lma ffffffff88010000
=>  Loading section .fini, size 0x30 lma ffffffff88010048
=>  Loading section .ctors, size 0x8 lma ffffffff88010078
=>  Loading section .dtors, size 0x8 lma ffffffff88010080
=>  Loading section .rdata, size 0x19bd lma ffffffff88010090
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a50
=>  Loading section .data, size 0x450 lma ffffffff88011a68
=>  Start address ffffffff88000004
=>  Transfer rate: 587112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[435/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:426 W:0   | mipstx39/jmr3904: spevent_err03.exe
Result: invalid   
Time: 0:00:00.256627 spevent_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017920
=>  Loading section .init, size 0x48 lma ffffffff88017990
=>  Loading section .fini, size 0x30 lma ffffffff880179d8
=>  Loading section .ctors, size 0x8 lma ffffffff88017a08
=>  Loading section .dtors, size 0x8 lma ffffffff88017a10
=>  Loading section .rdata, size 0x2920 lma ffffffff88017a20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a340
=>  Loading section .data, size 0x648 lma ffffffff8801a358
=>  Start address ffffffff88000004
=>  Transfer rate: 871616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[436/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:434 W:0   | mipstx39/jmr3904: speventsystem01.exe
Result: invalid   
Time: 0:00:00.257270 speventsystem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107b0
=>  Loading section .init, size 0x48 lma ffffffff88010820
=>  Loading section .fini, size 0x30 lma ffffffff88010868
=>  Loading section .ctors, size 0x8 lma ffffffff88010898
=>  Loading section .dtors, size 0x8 lma ffffffff880108a0
=>  Loading section .rdata, size 0x1a65 lma ffffffff880108b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012318
=>  Loading section .data, size 0x450 lma ffffffff88012330
=>  Start address ffffffff88000004
=>  Transfer rate: 605096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[437/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:434 W:0   | mipstx39/jmr3904: speventtransient01.exe
Result: invalid   
Time: 0:00:00.274440 speventtransient01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106e0
=>  Loading section .init, size 0x48 lma ffffffff88010750
=>  Loading section .fini, size 0x30 lma ffffffff88010798
=>  Loading section .ctors, size 0x8 lma ffffffff880107c8
=>  Loading section .dtors, size 0x8 lma ffffffff880107d0
=>  Loading section .rdata, size 0x1a29 lma ffffffff880107e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012210
=>  Loading section .data, size 0x450 lma ffffffff88012228
=>  Start address ffffffff88000004
=>  Transfer rate: 602952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[438/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:434 W:0   | mipstx39/jmr3904: spextensions01.exe
Result: invalid   
Time: 0:00:00.254010 spextensions01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11fd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011fd0
=>  Loading section .init, size 0x48 lma ffffffff88012040
=>  Loading section .fini, size 0x30 lma ffffffff88012088
=>  Loading section .ctors, size 0x8 lma ffffffff880120b8
=>  Loading section .dtors, size 0x8 lma ffffffff880120c0
=>  Loading section .rdata, size 0x1d5c lma ffffffff880120d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e30
=>  Loading section .data, size 0x480 lma ffffffff88013e48
=>  Start address ffffffff88000004
=>  Transfer rate: 660960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[439/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:434 W:0   | mipstx39/jmr3904: spfatal01.exe
Result: invalid   
Time: 0:00:00.259458 spfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100e0
=>  Loading section .init, size 0x48 lma ffffffff88010150
=>  Loading section .fini, size 0x30 lma ffffffff88010198
=>  Loading section .ctors, size 0x8 lma ffffffff880101c8
=>  Loading section .dtors, size 0x8 lma ffffffff880101d0
=>  Loading section .rdata, size 0x1dd8 lma ffffffff880101e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fb8
=>  Loading section .data, size 0x450 lma ffffffff88011fd0
=>  Start address ffffffff88000004
=>  Transfer rate: 598208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[440/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:434 W:0   | mipstx39/jmr3904: spfatal03.exe
Result: invalid   
Time: 0:00:00.255599 spfatal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d80
=>  Loading section .init, size 0x48 lma ffffffff88010df0
=>  Loading section .fini, size 0x30 lma ffffffff88010e38
=>  Loading section .ctors, size 0x8 lma ffffffff88010e68
=>  Loading section .dtors, size 0x8 lma ffffffff88010e70
=>  Loading section .rdata, size 0x1f55 lma ffffffff88010e80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012dd8
=>  Loading section .data, size 0x480 lma ffffffff88012df0
=>  Start address ffffffff88000004
=>  Transfer rate: 627496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[441/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:434 W:0   | mipstx39/jmr3904: spfatal04.exe
Result: invalid   
Time: 0:00:00.262331 spfatal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10190 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010190
=>  Loading section .init, size 0x48 lma ffffffff88010200
=>  Loading section .fini, size 0x30 lma ffffffff88010248
=>  Loading section .ctors, size 0x8 lma ffffffff88010278
=>  Loading section .dtors, size 0x8 lma ffffffff88010280
=>  Loading section .rdata, size 0x1dcd lma ffffffff88010290
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012060
=>  Loading section .data, size 0x450 lma ffffffff88012078
=>  Start address ffffffff88000004
=>  Transfer rate: 599528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[442/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:434 W:0   | mipstx39/jmr3904: spfatal05.exe
Result: invalid   
Time: 0:00:00.256180 spfatal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10470 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010470
=>  Loading section .init, size 0x48 lma ffffffff880104e0
=>  Loading section .fini, size 0x30 lma ffffffff88010528
=>  Loading section .ctors, size 0x8 lma ffffffff88010558
=>  Loading section .dtors, size 0x8 lma ffffffff88010560
=>  Loading section .rdata, size 0x1f0d lma ffffffff88010570
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012480
=>  Loading section .data, size 0x450 lma ffffffff88012498
=>  Start address ffffffff88000004
=>  Transfer rate: 607976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[443/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:434 W:0   | mipstx39/jmr3904: spfatal09.exe
Result: invalid   
Time: 0:00:00.260680 spfatal09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10260 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010260
=>  Loading section .init, size 0x48 lma ffffffff880102d0
=>  Loading section .fini, size 0x30 lma ffffffff88010318
=>  Loading section .ctors, size 0x8 lma ffffffff88010348
=>  Loading section .dtors, size 0x8 lma ffffffff88010350
=>  Loading section .rdata, size 0x1ddd lma ffffffff88010360
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012140
=>  Loading section .data, size 0x450 lma ffffffff88012158
=>  Start address ffffffff88000004
=>  Transfer rate: 601320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[444/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:442 W:0   | mipstx39/jmr3904: spfatal10.exe
Result: invalid   
Time: 0:00:00.253961 spfatal10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10130 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010130
=>  Loading section .init, size 0x48 lma ffffffff880101a0
=>  Loading section .fini, size 0x30 lma ffffffff880101e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010218
=>  Loading section .dtors, size 0x8 lma ffffffff88010220
=>  Loading section .rdata, size 0x1ac9 lma ffffffff88010230
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d00
=>  Loading section .data, size 0x450 lma ffffffff88011d18
=>  Start address ffffffff88000004
=>  Transfer rate: 592584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[445/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:442 W:0   | mipstx39/jmr3904: spfatal11.exe
Result: invalid   
Time: 0:00:00.263577 spfatal11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10120 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010120
=>  Loading section .init, size 0x48 lma ffffffff88010190
=>  Loading section .fini, size 0x30 lma ffffffff880101d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010208
=>  Loading section .dtors, size 0x8 lma ffffffff88010210
=>  Loading section .rdata, size 0x1ab9 lma ffffffff88010220
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ce0
=>  Loading section .data, size 0x450 lma ffffffff88011cf8
=>  Start address ffffffff88000004
=>  Transfer rate: 592328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[446/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:442 W:0   | mipstx39/jmr3904: spfatal12.exe
Result: invalid   
Time: 0:00:00.256871 spfatal12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10260 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010260
=>  Loading section .init, size 0x48 lma ffffffff880102d0
=>  Loading section .fini, size 0x30 lma ffffffff88010318
=>  Loading section .ctors, size 0x8 lma ffffffff88010348
=>  Loading section .dtors, size 0x8 lma ffffffff88010350
=>  Loading section .rdata, size 0x1df5 lma ffffffff88010360
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012158
=>  Loading section .data, size 0x450 lma ffffffff88012170
=>  Start address ffffffff88000004
=>  Transfer rate: 601512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[447/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:442 W:0   | mipstx39/jmr3904: spfatal14.exe
Result: invalid   
Time: 0:00:00.267270 spfatal14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10200 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010200
=>  Loading section .init, size 0x48 lma ffffffff88010270
=>  Loading section .fini, size 0x30 lma ffffffff880102b8
=>  Loading section .ctors, size 0x8 lma ffffffff880102e8
=>  Loading section .dtors, size 0x8 lma ffffffff880102f0
=>  Loading section .rdata, size 0x1dd5 lma ffffffff88010300
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120d8
=>  Loading section .data, size 0x450 lma ffffffff880120f0
=>  Start address ffffffff88000004
=>  Transfer rate: 600488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[448/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:442 W:0   | mipstx39/jmr3904: spfatal15.exe
Result: invalid   
Time: 0:00:00.254930 spfatal15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10200 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010200
=>  Loading section .init, size 0x48 lma ffffffff88010270
=>  Loading section .fini, size 0x30 lma ffffffff880102b8
=>  Loading section .ctors, size 0x8 lma ffffffff880102e8
=>  Loading section .dtors, size 0x8 lma ffffffff880102f0
=>  Loading section .rdata, size 0x1dd5 lma ffffffff88010300
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120d8
=>  Loading section .data, size 0x450 lma ffffffff880120f0
=>  Start address ffffffff88000004
=>  Transfer rate: 600488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[449/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:442 W:0   | mipstx39/jmr3904: spfatal28.exe
Result: invalid   
Time: 0:00:00.258254 spfatal28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x101d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880101d0
=>  Loading section .init, size 0x48 lma ffffffff88010240
=>  Loading section .fini, size 0x30 lma ffffffff88010288
=>  Loading section .ctors, size 0x8 lma ffffffff880102b8
=>  Loading section .dtors, size 0x8 lma ffffffff880102c0
=>  Loading section .rdata, size 0x1dcd lma ffffffff880102d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880120a0
=>  Loading section .data, size 0x450 lma ffffffff880120b8
=>  Start address ffffffff88000004
=>  Transfer rate: 600040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[450/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:442 W:0   | mipstx39/jmr3904: spfatal29.exe
Result: invalid   
Time: 0:00:00.262520 spfatal29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10660 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010660
=>  Loading section .init, size 0x48 lma ffffffff880106d0
=>  Loading section .fini, size 0x30 lma ffffffff88010718
=>  Loading section .ctors, size 0x8 lma ffffffff88010748
=>  Loading section .dtors, size 0x8 lma ffffffff88010750
=>  Loading section .rdata, size 0x1e15 lma ffffffff88010760
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012578
=>  Loading section .data, size 0x480 lma ffffffff88012590
=>  Start address ffffffff88000004
=>  Transfer rate: 610344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[451/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:442 W:0   | mipstx39/jmr3904: spfatal30.exe
Result: invalid   
Time: 0:00:00.259206 spfatal30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe430 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800e430
=>  Loading section .init, size 0x48 lma ffffffff8800e490
=>  Loading section .fini, size 0x30 lma ffffffff8800e4d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800e508
=>  Loading section .dtors, size 0x8 lma ffffffff8800e510
=>  Loading section .rdata, size 0x188d lma ffffffff8800e520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800fdb0
=>  Loading section .data, size 0x404 lma ffffffff8800fdc8
=>  Start address ffffffff88000004
=>  Transfer rate: 527880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[452/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:450 W:0   | mipstx39/jmr3904: spfatal31.exe
Result: invalid   
Time: 0:00:00.262284 spfatal31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf610 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f610
=>  Loading section .init, size 0x48 lma ffffffff8800f680
=>  Loading section .fini, size 0x30 lma ffffffff8800f6c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f6f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f700
=>  Loading section .rdata, size 0x18f5 lma ffffffff8800f710
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011008
=>  Loading section .data, size 0x44c lma ffffffff88011020
=>  Start address ffffffff88000004
=>  Transfer rate: 566024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[453/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:450 W:0   | mipstx39/jmr3904: spfatal32.exe
Result: invalid   
Time: 0:00:00.254922 spfatal32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10230 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010230
=>  Loading section .init, size 0x48 lma ffffffff880102a0
=>  Loading section .fini, size 0x30 lma ffffffff880102e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010318
=>  Loading section .dtors, size 0x8 lma ffffffff88010320
=>  Loading section .rdata, size 0x1ddd lma ffffffff88010330
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012110
=>  Loading section .data, size 0x450 lma ffffffff88012128
=>  Start address ffffffff88000004
=>  Transfer rate: 600936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[454/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:450 W:0   | mipstx39/jmr3904: spfatal33.exe
Result: invalid   
Time: 0:00:00.259075 spfatal33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10280 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010280
=>  Loading section .init, size 0x48 lma ffffffff880102f0
=>  Loading section .fini, size 0x30 lma ffffffff88010338
=>  Loading section .ctors, size 0x8 lma ffffffff88010368
=>  Loading section .dtors, size 0x8 lma ffffffff88010370
=>  Loading section .rdata, size 0x1dfd lma ffffffff88010380
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012180
=>  Loading section .data, size 0x450 lma ffffffff88012198
=>  Start address ffffffff88000004
=>  Transfer rate: 601832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[455/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:450 W:0   | mipstx39/jmr3904: spfatal34.exe
Result: invalid   
Time: 0:00:00.261641 spfatal34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10010 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010010
=>  Loading section .init, size 0x48 lma ffffffff88010080
=>  Loading section .fini, size 0x30 lma ffffffff880100c8
=>  Loading section .ctors, size 0x8 lma ffffffff880100f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010100
=>  Loading section .rdata, size 0x1dc0 lma ffffffff88010110
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ed0
=>  Loading section .data, size 0x450 lma ffffffff88011ee8
=>  Start address ffffffff88000004
=>  Transfer rate: 596352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[456/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:450 W:0   | mipstx39/jmr3904: spfifo01.exe
Result: invalid   
Time: 0:00:00.259779 spfifo01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f520
=>  Loading section .init, size 0x48 lma ffffffff8800f590
=>  Loading section .fini, size 0x30 lma ffffffff8800f5d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f608
=>  Loading section .dtors, size 0x8 lma ffffffff8800f610
=>  Loading section .rdata, size 0x1a69 lma ffffffff8800f620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011090
=>  Loading section .data, size 0x440 lma ffffffff880110a8
=>  Start address ffffffff88000004
=>  Transfer rate: 566984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[457/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:450 W:0   | mipstx39/jmr3904: spfifo02.exe
Result: invalid   
Time: 0:00:00.263134 spfifo02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12760 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012760
=>  Loading section .init, size 0x48 lma ffffffff880127d0
=>  Loading section .fini, size 0x30 lma ffffffff88012818
=>  Loading section .ctors, size 0x8 lma ffffffff88012848
=>  Loading section .dtors, size 0x8 lma ffffffff88012850
=>  Loading section .rdata, size 0x2678 lma ffffffff88012860
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ed8
=>  Loading section .data, size 0x478 lma ffffffff88014ef0
=>  Start address ffffffff88000004
=>  Transfer rate: 695040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[458/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:450 W:0   | mipstx39/jmr3904: spfifo03.exe
Result: invalid   
Time: 0:00:00.260787 spfifo03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13c60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013c60
=>  Loading section .init, size 0x48 lma ffffffff88013ce0
=>  Loading section .fini, size 0x30 lma ffffffff88013d28
=>  Loading section .ctors, size 0x8 lma ffffffff88013d58
=>  Loading section .dtors, size 0x8 lma ffffffff88013d60
=>  Loading section .rdata, size 0x27d4 lma ffffffff88013d70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016548
=>  Loading section .data, size 0x4b4 lma ffffffff88016560
=>  Start address ffffffff88000004
=>  Transfer rate: 741440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[459/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:450 W:0   | mipstx39/jmr3904: spfifo04.exe
Result: invalid   
Time: 0:00:00.252666 spfifo04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12610 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012610
=>  Loading section .init, size 0x48 lma ffffffff88012680
=>  Loading section .fini, size 0x30 lma ffffffff880126c8
=>  Loading section .ctors, size 0x8 lma ffffffff880126f8
=>  Loading section .dtors, size 0x8 lma ffffffff88012700
=>  Loading section .rdata, size 0x1dcc lma ffffffff88012710
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880144e0
=>  Loading section .data, size 0x470 lma ffffffff880144f8
=>  Start address ffffffff88000004
=>  Transfer rate: 674528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[460/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:458 W:0   | mipstx39/jmr3904: spfifo05.exe
Result: invalid   
Time: 0:00:00.258554 spfifo05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ae0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012ae0
=>  Loading section .init, size 0x48 lma ffffffff88012b50
=>  Loading section .fini, size 0x30 lma ffffffff88012b98
=>  Loading section .ctors, size 0x8 lma ffffffff88012bc8
=>  Loading section .dtors, size 0x8 lma ffffffff88012bd0
=>  Loading section .rdata, size 0x28f8 lma ffffffff88012be0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880154d8
=>  Loading section .data, size 0x498 lma ffffffff880154f0
=>  Start address ffffffff88000004
=>  Transfer rate: 707584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[461/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:458 W:0   | mipstx39/jmr3904: spfreechain01.exe
Result: invalid   
Time: 0:00:00.264944 spfreechain01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf710 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f710
=>  Loading section .init, size 0x48 lma ffffffff8800f780
=>  Loading section .fini, size 0x30 lma ffffffff8800f7c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f7f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f800
=>  Loading section .rdata, size 0x1b75 lma ffffffff8800f810
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011388
=>  Loading section .data, size 0x440 lma ffffffff880113a0
=>  Start address ffffffff88000004
=>  Transfer rate: 573096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[462/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:458 W:0   | mipstx39/jmr3904: spglobalcon01.exe
Result: invalid   
Time: 0:00:00.258272 spglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800eab0
=>  Loading section .init, size 0x48 lma ffffffff8800eb10
=>  Loading section .fini, size 0x30 lma ffffffff8800eb58
=>  Loading section .ctors, size 0xc lma ffffffff8800eb88
=>  Loading section .dtors, size 0x8 lma ffffffff8800eb94
=>  Loading section .rdata, size 0x198c lma ffffffff8800eba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010530
=>  Loading section .data, size 0x3c8 lma ffffffff88010548
=>  Start address ffffffff88000004
=>  Transfer rate: 542784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[463/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:458 W:0   | mipstx39/jmr3904: spglobalcon02.exe
Result: invalid   
Time: 0:00:00.263334 spglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x104a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880104a0
=>  Loading section .init, size 0x48 lma ffffffff88010510
=>  Loading section .fini, size 0x30 lma ffffffff88010558
=>  Loading section .ctors, size 0x18 lma ffffffff88010588
=>  Loading section .dtors, size 0x18 lma ffffffff880105a0
=>  Loading section .rdata, size 0x1a40 lma ffffffff880105c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012000
=>  Loading section .data, size 0x450 lma ffffffff88012018
=>  Start address ffffffff88000004
=>  Transfer rate: 598784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[464/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:458 W:0   | mipstx39/jmr3904: spheapprot.exe
Result: invalid   
Time: 0:00:00.269948 spheapprot.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f580
=>  Loading section .init, size 0x48 lma ffffffff8800f5f0
=>  Loading section .fini, size 0x30 lma ffffffff8800f638
=>  Loading section .ctors, size 0x8 lma ffffffff8800f668
=>  Loading section .dtors, size 0x8 lma ffffffff8800f670
=>  Loading section .rdata, size 0x1984 lma ffffffff8800f680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011008
=>  Loading section .data, size 0x440 lma ffffffff88011020
=>  Start address ffffffff88000004
=>  Transfer rate: 565920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[465/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:458 W:0   | mipstx39/jmr3904: spinternalerror01.exe
Result: invalid   
Time: 0:00:00.261137 spinternalerror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x3ec0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x50 lma ffffffff88003ec0
=>  Loading section .init, size 0x48 lma ffffffff88003f10
=>  Loading section .fini, size 0x30 lma ffffffff88003f58
=>  Loading section .ctors, size 0x8 lma ffffffff88003f88
=>  Loading section .dtors, size 0x8 lma ffffffff88003f90
=>  Loading section .rdata, size 0x1434 lma ffffffff88003fa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880053d8
=>  Loading section .data, size 0x7c lma ffffffff880053f0
=>  Start address ffffffff88000004
=>  Transfer rate: 172800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[466/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:458 W:0   | mipstx39/jmr3904: spinternalerror02.exe
Result: invalid   
Time: 0:00:00.255964 spinternalerror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf540 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f540
=>  Loading section .init, size 0x48 lma ffffffff8800f5b0
=>  Loading section .fini, size 0x30 lma ffffffff8800f5f8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f628
=>  Loading section .dtors, size 0x8 lma ffffffff8800f630
=>  Loading section .rdata, size 0x1d61 lma ffffffff8800f640
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880113a8
=>  Loading section .data, size 0x440 lma ffffffff880113c0
=>  Start address ffffffff88000004
=>  Transfer rate: 573320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[467/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:458 W:0   | mipstx39/jmr3904: spintr_err01.exe
Result: invalid   
Time: 0:00:00.258455 spintr_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ffc0
=>  Loading section .init, size 0x48 lma ffffffff88010030
=>  Loading section .fini, size 0x30 lma ffffffff88010078
=>  Loading section .ctors, size 0x8 lma ffffffff880100a8
=>  Loading section .dtors, size 0x8 lma ffffffff880100b0
=>  Loading section .rdata, size 0x1a0d lma ffffffff880100c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ad0
=>  Loading section .data, size 0x450 lma ffffffff88011ae8
=>  Start address ffffffff88000004
=>  Transfer rate: 588136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[468/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:466 W:0   | mipstx39/jmr3904: splinkersets01.exe
Result: invalid   
Time: 0:00:00.259230 splinkersets01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xa0 lma ffffffff8800fc50
=>  Loading section .init, size 0x48 lma ffffffff8800fcf0
=>  Loading section .fini, size 0x30 lma ffffffff8800fd38
=>  Loading section .ctors, size 0x8 lma ffffffff8800fd68
=>  Loading section .dtors, size 0x8 lma ffffffff8800fd70
=>  Loading section .rdata, size 0x2215 lma ffffffff8800fd80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f98
=>  Loading section .data, size 0x440 lma ffffffff88011fb0
=>  Loading section .rtemsrwset, size 0x34 lma ffffffff880123f0
=>  Start address ffffffff88000004
=>  Transfer rate: 598216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[469/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:466 W:0   | mipstx39/jmr3904: spmisc01.exe
Result: invalid   
Time: 0:00:00.253333 spmisc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf5a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f5a0
=>  Loading section .init, size 0x48 lma ffffffff8800f610
=>  Loading section .fini, size 0x30 lma ffffffff8800f658
=>  Loading section .ctors, size 0x8 lma ffffffff8800f688
=>  Loading section .dtors, size 0x8 lma ffffffff8800f690
=>  Loading section .rdata, size 0x1add lma ffffffff8800f6a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011180
=>  Loading section .data, size 0x440 lma ffffffff88011198
=>  Start address ffffffff88000004
=>  Transfer rate: 568936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[470/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:466 W:0   | mipstx39/jmr3904: spmkdir.exe
Result: invalid   
Time: 0:00:00.257322 spmkdir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfcf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fcf0
=>  Loading section .init, size 0x48 lma ffffffff8800fd60
=>  Loading section .fini, size 0x30 lma ffffffff8800fda8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fdd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fde0
=>  Loading section .rdata, size 0x1c2c lma ffffffff8800fdf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a20
=>  Loading section .data, size 0x440 lma ffffffff88011a38
=>  Start address ffffffff88000004
=>  Transfer rate: 586592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[471/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:466 W:0   | mipstx39/jmr3904: spmountmgr01.exe
Result: invalid   
Time: 0:00:00.259264 spmountmgr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10160 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010160
=>  Loading section .init, size 0x48 lma ffffffff880101d0
=>  Loading section .fini, size 0x30 lma ffffffff88010218
=>  Loading section .ctors, size 0x8 lma ffffffff88010248
=>  Loading section .dtors, size 0x8 lma ffffffff88010250
=>  Loading section .rdata, size 0x1ccd lma ffffffff88010260
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f30
=>  Loading section .data, size 0x440 lma ffffffff88011f48
=>  Start address ffffffff88000004
=>  Transfer rate: 596968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[472/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:466 W:0   | mipstx39/jmr3904: spmrsp01.exe
Result: invalid   
Time: 0:00:00.254468 spmrsp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12850 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012850
=>  Loading section .init, size 0x48 lma ffffffff880128c0
=>  Loading section .fini, size 0x30 lma ffffffff88012908
=>  Loading section .ctors, size 0x8 lma ffffffff88012938
=>  Loading section .dtors, size 0x8 lma ffffffff88012940
=>  Loading section .rdata, size 0x1c49 lma ffffffff88012950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880145a0
=>  Loading section .data, size 0x4b0 lma ffffffff880145b8
=>  Start address ffffffff88000004
=>  Transfer rate: 676552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[473/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:466 W:0   | mipstx39/jmr3904: spmsgq_err01.exe
Result: invalid   
Time: 0:00:00.257041 spmsgq_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12560 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012560
=>  Loading section .init, size 0x48 lma ffffffff880125d0
=>  Loading section .fini, size 0x30 lma ffffffff88012618
=>  Loading section .ctors, size 0x8 lma ffffffff88012648
=>  Loading section .dtors, size 0x8 lma ffffffff88012650
=>  Loading section .rdata, size 0x2a91 lma ffffffff88012660
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150f8
=>  Loading section .data, size 0x480 lma ffffffff88015110
=>  Start address ffffffff88000004
=>  Transfer rate: 699400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[474/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:466 W:0   | mipstx39/jmr3904: spmsgq_err02.exe
Result: invalid   
Time: 0:00:00.283222 spmsgq_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ac0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ac0
=>  Loading section .init, size 0x48 lma ffffffff88011b30
=>  Loading section .fini, size 0x30 lma ffffffff88011b78
=>  Loading section .ctors, size 0x8 lma ffffffff88011ba8
=>  Loading section .dtors, size 0x8 lma ffffffff88011bb0
=>  Loading section .rdata, size 0x22a5 lma ffffffff88011bc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e68
=>  Loading section .data, size 0x480 lma ffffffff88013e80
=>  Start address ffffffff88000004
=>  Transfer rate: 661416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[475/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:466 W:0   | mipstx39/jmr3904: spmutex01.exe
Result: invalid   
Time: 0:00:00.259041 spmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14260 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014260
=>  Loading section .init, size 0x48 lma ffffffff880142d0
=>  Loading section .fini, size 0x30 lma ffffffff88014318
=>  Loading section .ctors, size 0x8 lma ffffffff88014348
=>  Loading section .dtors, size 0x8 lma ffffffff88014350
=>  Loading section .rdata, size 0x1be9 lma ffffffff88014360
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015f50
=>  Loading section .data, size 0x4b0 lma ffffffff88015f68
=>  Start address ffffffff88000004
=>  Transfer rate: 729160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[476/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:474 W:0   | mipstx39/jmr3904: spnsext01.exe
Result: invalid   
Time: 0:00:00.263322 spnsext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1a09 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f20
=>  Loading section .data, size 0x450 lma ffffffff88011f38
=>  Start address ffffffff88000004
=>  Transfer rate: 596936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[477/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:474 W:0   | mipstx39/jmr3904: spntp01.exe
Result: invalid   
Time: 0:00:00.261005 spntp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16740 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88016740
=>  Loading section .init, size 0x48 lma ffffffff880167c0
=>  Loading section .fini, size 0x30 lma ffffffff88016808
=>  Loading section .ctors, size 0x8 lma ffffffff88016838
=>  Loading section .dtors, size 0x8 lma ffffffff88016840
=>  Loading section .rdata, size 0x2340 lma ffffffff88016850
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018b90
=>  Loading section .data, size 0x490 lma ffffffff88018ba8
=>  Start address ffffffff88000004
=>  Transfer rate: 819584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[478/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:474 W:0   | mipstx39/jmr3904: spobjgetnext.exe
Result: invalid   
Time: 0:00:00.283923 spobjgetnext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10380 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010380
=>  Loading section .init, size 0x48 lma ffffffff880103f0
=>  Loading section .fini, size 0x30 lma ffffffff88010438
=>  Loading section .ctors, size 0x8 lma ffffffff88010468
=>  Loading section .dtors, size 0x8 lma ffffffff88010470
=>  Loading section .rdata, size 0x1a89 lma ffffffff88010480
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f10
=>  Loading section .data, size 0x450 lma ffffffff88011f28
=>  Start address ffffffff88000004
=>  Transfer rate: 596808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[479/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:474 W:0   | mipstx39/jmr3904: sppagesize.exe
Result: invalid   
Time: 0:00:00.272883 sppagesize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f420
=>  Loading section .init, size 0x48 lma ffffffff8800f490
=>  Loading section .fini, size 0x30 lma ffffffff8800f4d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f508
=>  Loading section .dtors, size 0x8 lma ffffffff8800f510
=>  Loading section .rdata, size 0x19d5 lma ffffffff8800f520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ef8
=>  Loading section .data, size 0x440 lma ffffffff88010f10
=>  Start address ffffffff88000004
=>  Transfer rate: 563752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[480/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:474 W:0   | mipstx39/jmr3904: sppartition_err01.exe
Result: invalid   
Time: 0:00:00.284424 sppartition_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112c0
=>  Loading section .init, size 0x48 lma ffffffff88011330
=>  Loading section .fini, size 0x30 lma ffffffff88011378
=>  Loading section .ctors, size 0x8 lma ffffffff880113a8
=>  Loading section .dtors, size 0x8 lma ffffffff880113b0
=>  Loading section .rdata, size 0x259d lma ffffffff880113c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013960
=>  Loading section .data, size 0x480 lma ffffffff88013978
=>  Start address ffffffff88000004
=>  Transfer rate: 651112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[481/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:474 W:0   | mipstx39/jmr3904: sppercpudata01.exe
Result: invalid   
Time: 0:00:00.271144 sppercpudata01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fc80
=>  Loading section .init, size 0x48 lma ffffffff8800fcf0
=>  Loading section .fini, size 0x30 lma ffffffff8800fd38
=>  Loading section .ctors, size 0x8 lma ffffffff8800fd68
=>  Loading section .dtors, size 0x8 lma ffffffff8800fd70
=>  Loading section .rdata, size 0x1b45 lma ffffffff8800fd80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118c8
=>  Loading section .data, size 0x440 lma ffffffff880118e0
=>  Loading section .rtemsrwset, size 0x4c lma ffffffff88011d20
=>  Start address ffffffff88000004
=>  Transfer rate: 584456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[482/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:474 W:0   | mipstx39/jmr3904: spport_err01.exe
Result: invalid   
Time: 0:00:00.269929 spport_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ae0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ae0
=>  Loading section .init, size 0x48 lma ffffffff88010b50
=>  Loading section .fini, size 0x30 lma ffffffff88010b98
=>  Loading section .ctors, size 0x8 lma ffffffff88010bc8
=>  Loading section .dtors, size 0x8 lma ffffffff88010bd0
=>  Loading section .rdata, size 0x2089 lma ffffffff88010be0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c70
=>  Loading section .data, size 0x480 lma ffffffff88012c88
=>  Start address ffffffff88000004
=>  Transfer rate: 624584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[483/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:474 W:0   | mipstx39/jmr3904: spprintk.exe
Result: invalid   
Time: 0:00:00.251735 spprintk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf470 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800f470
=>  Loading section .init, size 0x48 lma ffffffff8800f4d0
=>  Loading section .fini, size 0x30 lma ffffffff8800f518
=>  Loading section .ctors, size 0x8 lma ffffffff8800f548
=>  Loading section .dtors, size 0x8 lma ffffffff8800f550
=>  Loading section .rdata, size 0x23ed lma ffffffff8800f560
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011950
=>  Loading section .data, size 0x400 lma ffffffff88011968
=>  Start address ffffffff88000004
=>  Transfer rate: 584424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[484/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:482 W:0   | mipstx39/jmr3904: spprivenv01.exe
Result: invalid   
Time: 0:00:00.255932 spprivenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011580
=>  Loading section .init, size 0x48 lma ffffffff880115f0
=>  Loading section .fini, size 0x30 lma ffffffff88011638
=>  Loading section .ctors, size 0x8 lma ffffffff88011668
=>  Loading section .dtors, size 0x8 lma ffffffff88011670
=>  Loading section .rdata, size 0x2100 lma ffffffff88011680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013780
=>  Loading section .data, size 0x494 lma ffffffff88013798
=>  Start address ffffffff88000004
=>  Transfer rate: 647456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[485/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:482 W:0   | mipstx39/jmr3904: spprofiling01.exe
Result: invalid   
Time: 0:00:00.254207 spprofiling01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10360 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010360
=>  Loading section .init, size 0x48 lma ffffffff880103d0
=>  Loading section .fini, size 0x30 lma ffffffff88010418
=>  Loading section .ctors, size 0x8 lma ffffffff88010448
=>  Loading section .dtors, size 0x8 lma ffffffff88010450
=>  Loading section .rdata, size 0x1a81 lma ffffffff88010460
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ee8
=>  Loading section .data, size 0x450 lma ffffffff88011f00
=>  Start address ffffffff88000004
=>  Transfer rate: 596488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[486/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:482 W:0   | mipstx39/jmr3904: spqreslib.exe
Result: invalid   
Time: 0:00:00.259846 spqreslib.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13460 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013460
=>  Loading section .init, size 0x48 lma ffffffff880134d0
=>  Loading section .fini, size 0x30 lma ffffffff88013518
=>  Loading section .ctors, size 0x8 lma ffffffff88013548
=>  Loading section .dtors, size 0x8 lma ffffffff88013550
=>  Loading section .rdata, size 0x267c lma ffffffff88013560
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015be0
=>  Loading section .data, size 0x480 lma ffffffff88015bf8
=>  Start address ffffffff88000004
=>  Transfer rate: 721760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[487/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:482 W:0   | mipstx39/jmr3904: spratemon_err01.exe
Result: invalid   
Time: 0:00:00.259706 spratemon_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12040 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012040
=>  Loading section .init, size 0x48 lma ffffffff880120b0
=>  Loading section .fini, size 0x30 lma ffffffff880120f8
=>  Loading section .ctors, size 0x8 lma ffffffff88012128
=>  Loading section .dtors, size 0x8 lma ffffffff88012130
=>  Loading section .rdata, size 0x274d lma ffffffff88012140
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014890
=>  Loading section .data, size 0x480 lma ffffffff880148a8
=>  Start address ffffffff88000004
=>  Transfer rate: 682216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[488/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:482 W:0   | mipstx39/jmr3904: sprbtree01.exe
Result: invalid   
Time: 0:00:00.258257 sprbtree01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880114f0
=>  Loading section .init, size 0x48 lma ffffffff88011560
=>  Loading section .fini, size 0x30 lma ffffffff880115a8
=>  Loading section .ctors, size 0x8 lma ffffffff880115d8
=>  Loading section .dtors, size 0x8 lma ffffffff880115e0
=>  Loading section .rdata, size 0x6f71 lma ffffffff880115f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018568
=>  Loading section .data, size 0x4d0 lma ffffffff88018580
=>  Start address ffffffff88000004
=>  Transfer rate: 807432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[489/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:482 W:0   | mipstx39/jmr3904: spregion_err01.exe
Result: invalid   
Time: 0:00:00.253629 spregion_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12bc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012bc0
=>  Loading section .init, size 0x48 lma ffffffff88012c30
=>  Loading section .fini, size 0x30 lma ffffffff88012c78
=>  Loading section .ctors, size 0x8 lma ffffffff88012ca8
=>  Loading section .dtors, size 0x8 lma ffffffff88012cb0
=>  Loading section .rdata, size 0x2951 lma ffffffff88012cc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015618
=>  Loading section .data, size 0x480 lma ffffffff88015630
=>  Start address ffffffff88000004
=>  Transfer rate: 709896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[490/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:482 W:0   | mipstx39/jmr3904: sprmsched01.exe
Result: invalid   
Time: 0:00:00.255893 sprmsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x118a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880118a0
=>  Loading section .init, size 0x48 lma ffffffff88011910
=>  Loading section .fini, size 0x30 lma ffffffff88011958
=>  Loading section .ctors, size 0x8 lma ffffffff88011988
=>  Loading section .dtors, size 0x8 lma ffffffff88011990
=>  Loading section .rdata, size 0x1f51 lma ffffffff880119a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138f8
=>  Loading section .data, size 0x480 lma ffffffff88013910
=>  Start address ffffffff88000004
=>  Transfer rate: 650248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[491/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:482 W:0   | mipstx39/jmr3904: sprmsched02.exe
Result: invalid   
Time: 0:00:00.256207 sprmsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11020 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011020
=>  Loading section .init, size 0x48 lma ffffffff88011090
=>  Loading section .fini, size 0x30 lma ffffffff880110d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011108
=>  Loading section .dtors, size 0x8 lma ffffffff88011110
=>  Loading section .rdata, size 0x1f19 lma ffffffff88011120
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013040
=>  Loading section .data, size 0x480 lma ffffffff88013058
=>  Start address ffffffff88000004
=>  Transfer rate: 632392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[492/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:490 W:0   | mipstx39/jmr3904: spscheduler01.exe
Result: invalid   
Time: 0:00:00.270621 spscheduler01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015150
=>  Loading section .init, size 0x48 lma ffffffff880151c0
=>  Loading section .fini, size 0x30 lma ffffffff88015208
=>  Loading section .ctors, size 0x8 lma ffffffff88015238
=>  Loading section .dtors, size 0x8 lma ffffffff88015240
=>  Loading section .rdata, size 0x1e45 lma ffffffff88015250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017098
=>  Loading section .data, size 0x4b0 lma ffffffff880170b0
=>  Start address ffffffff88000004
=>  Transfer rate: 764584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[493/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:490 W:0   | mipstx39/jmr3904: spsem01.exe
Result: invalid   
Time: 0:00:00.263915 spsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011d50
=>  Loading section .init, size 0x48 lma ffffffff88011dc0
=>  Loading section .fini, size 0x30 lma ffffffff88011e08
=>  Loading section .ctors, size 0x8 lma ffffffff88011e38
=>  Loading section .dtors, size 0x8 lma ffffffff88011e40
=>  Loading section .rdata, size 0x2071 lma ffffffff88011e50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ec8
=>  Loading section .data, size 0x480 lma ffffffff88013ee0
=>  Start address ffffffff88000004
=>  Transfer rate: 662152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[494/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:490 W:0   | mipstx39/jmr3904: spsem02.exe
Result: invalid   
Time: 0:00:00.272017 spsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12040 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012040
=>  Loading section .init, size 0x48 lma ffffffff880120b0
=>  Loading section .fini, size 0x30 lma ffffffff880120f8
=>  Loading section .ctors, size 0x8 lma ffffffff88012128
=>  Loading section .dtors, size 0x8 lma ffffffff88012130
=>  Loading section .rdata, size 0x2131 lma ffffffff88012140
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014278
=>  Loading section .data, size 0x480 lma ffffffff88014290
=>  Start address ffffffff88000004
=>  Transfer rate: 669704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[495/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:490 W:0   | mipstx39/jmr3904: spsem03.exe
Result: invalid   
Time: 0:00:00.258845 spsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f80
=>  Loading section .init, size 0x48 lma ffffffff88010ff0
=>  Loading section .fini, size 0x30 lma ffffffff88011038
=>  Loading section .ctors, size 0x8 lma ffffffff88011068
=>  Loading section .dtors, size 0x8 lma ffffffff88011070
=>  Loading section .rdata, size 0x1a05 lma ffffffff88011080
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a88
=>  Loading section .data, size 0x480 lma ffffffff88012aa0
=>  Start address ffffffff88000004
=>  Transfer rate: 620712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[496/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:490 W:0   | mipstx39/jmr3904: spsem_err01.exe
Result: invalid   
Time: 0:00:00.255259 spsem_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11a40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011a40
=>  Loading section .init, size 0x48 lma ffffffff88011ab0
=>  Loading section .fini, size 0x30 lma ffffffff88011af8
=>  Loading section .ctors, size 0x8 lma ffffffff88011b28
=>  Loading section .dtors, size 0x8 lma ffffffff88011b30
=>  Loading section .rdata, size 0x2495 lma ffffffff88011b40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013fd8
=>  Loading section .data, size 0x480 lma ffffffff88013ff0
=>  Start address ffffffff88000004
=>  Transfer rate: 664360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[497/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:490 W:0   | mipstx39/jmr3904: spsem_err02.exe
Result: invalid   
Time: 0:00:00.258578 spsem_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c40
=>  Loading section .init, size 0x48 lma ffffffff88011cb0
=>  Loading section .fini, size 0x30 lma ffffffff88011cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88011d28
=>  Loading section .dtors, size 0x8 lma ffffffff88011d30
=>  Loading section .rdata, size 0x232d lma ffffffff88011d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014070
=>  Loading section .data, size 0x480 lma ffffffff88014088
=>  Start address ffffffff88000004
=>  Transfer rate: 665576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[498/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:490 W:0   | mipstx39/jmr3904: spsignal_err01.exe
Result: invalid   
Time: 0:00:00.253920 spsignal_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010620
=>  Loading section .init, size 0x48 lma ffffffff88010690
=>  Loading section .fini, size 0x30 lma ffffffff880106d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010708
=>  Loading section .dtors, size 0x8 lma ffffffff88010710
=>  Loading section .rdata, size 0x1e75 lma ffffffff88010720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012598
=>  Loading section .data, size 0x450 lma ffffffff880125b0
=>  Start address ffffffff88000004
=>  Transfer rate: 610216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[499/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:490 W:0   | mipstx39/jmr3904: spsimplesched01.exe
Result: invalid   
Time: 0:00:00.262870 spsimplesched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b70
=>  Loading section .init, size 0x48 lma ffffffff88011be0
=>  Loading section .fini, size 0x30 lma ffffffff88011c28
=>  Loading section .ctors, size 0x8 lma ffffffff88011c58
=>  Loading section .dtors, size 0x8 lma ffffffff88011c60
=>  Loading section .rdata, size 0x2030 lma ffffffff88011c70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ca0
=>  Loading section .data, size 0x5f8 lma ffffffff88013cb8
=>  Start address ffffffff88000004
=>  Transfer rate: 660800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[500/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:498 W:0   | mipstx39/jmr3904: spsimplesched02.exe
Result: invalid   
Time: 0:00:00.257790 spsimplesched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880115e0
=>  Loading section .init, size 0x48 lma ffffffff88011650
=>  Loading section .fini, size 0x30 lma ffffffff88011698
=>  Loading section .ctors, size 0x8 lma ffffffff880116c8
=>  Loading section .dtors, size 0x8 lma ffffffff880116d0
=>  Loading section .rdata, size 0x1f81 lma ffffffff880116e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013668
=>  Loading section .data, size 0x480 lma ffffffff88013680
=>  Start address ffffffff88000004
=>  Transfer rate: 645000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[501/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:498 W:0   | mipstx39/jmr3904: spsimplesched03.exe
Result: invalid   
Time: 0:00:00.256017 spsimplesched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1dd9 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122f0
=>  Loading section .data, size 0x480 lma ffffffff88012308
=>  Start address ffffffff88000004
=>  Transfer rate: 605128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[502/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:498 W:0   | mipstx39/jmr3904: spsize.exe
Result: invalid   
Time: 0:00:00.265112 spsize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12700 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012700
=>  Loading section .init, size 0x48 lma ffffffff88012770
=>  Loading section .fini, size 0x30 lma ffffffff880127b8
=>  Loading section .ctors, size 0x8 lma ffffffff880127e8
=>  Loading section .dtors, size 0x8 lma ffffffff880127f0
=>  Loading section .rdata, size 0x2510 lma ffffffff88012800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d10
=>  Loading section .data, size 0x450 lma ffffffff88014d28
=>  Start address ffffffff88000004
=>  Transfer rate: 691072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[503/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:498 W:0   | mipstx39/jmr3904: spstdthreads01.exe
Result: invalid   
Time: 0:00:00.259497 spstdthreads01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014420
=>  Loading section .init, size 0x48 lma ffffffff880144a0
=>  Loading section .fini, size 0x30 lma ffffffff880144e8
=>  Loading section .ctors, size 0x8 lma ffffffff88014518
=>  Loading section .dtors, size 0x8 lma ffffffff88014520
=>  Loading section .rdata, size 0x1c41 lma ffffffff88014530
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016178
=>  Loading section .data, size 0x568 lma ffffffff88016190
=>  Start address ffffffff88000004
=>  Transfer rate: 735048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[504/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:498 W:0   | mipstx39/jmr3904: spstkalloc.exe
Result: invalid   
Time: 0:00:00.254416 spstkalloc.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfaf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800faf0
=>  Loading section .init, size 0x48 lma ffffffff8800fb60
=>  Loading section .fini, size 0x30 lma ffffffff8800fba8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fbd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fbe0
=>  Loading section .rdata, size 0x1e84 lma ffffffff8800fbf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a78
=>  Loading section .data, size 0x440 lma ffffffff88011a90
=>  Start address ffffffff88000004
=>  Transfer rate: 587296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[505/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:498 W:0   | mipstx39/jmr3904: spstkalloc02.exe
Result: invalid   
Time: 0:00:00.257387 spstkalloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9840 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88009840
=>  Loading section .init, size 0x48 lma ffffffff880098a0
=>  Loading section .fini, size 0x30 lma ffffffff880098e8
=>  Loading section .ctors, size 0x8 lma ffffffff88009918
=>  Loading section .dtors, size 0x8 lma ffffffff88009920
=>  Loading section .rdata, size 0x1998 lma ffffffff88009930
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800b2c8
=>  Loading section .data, size 0x32c lma ffffffff8800b2e0
=>  Start address ffffffff88000004
=>  Transfer rate: 372768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[506/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:498 W:0   | mipstx39/jmr3904: spstkalloc03.exe
Result: invalid   
Time: 0:00:00.254413 spstkalloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17a90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017a90
=>  Loading section .init, size 0x48 lma ffffffff88017b00
=>  Loading section .fini, size 0x30 lma ffffffff88017b48
=>  Loading section .ctors, size 0x8 lma ffffffff88017b78
=>  Loading section .dtors, size 0x8 lma ffffffff88017b80
=>  Loading section .rdata, size 0x20a0 lma ffffffff88017b90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019c30
=>  Loading section .data, size 0x5d4 lma ffffffff88019c48
=>  Start address ffffffff88000004
=>  Transfer rate: 856224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[507/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:498 W:0   | mipstx39/jmr3904: spstkalloc04.exe
Result: invalid   
Time: 0:00:00.254213 spstkalloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17a40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017a40
=>  Loading section .init, size 0x48 lma ffffffff88017ab0
=>  Loading section .fini, size 0x30 lma ffffffff88017af8
=>  Loading section .ctors, size 0x8 lma ffffffff88017b28
=>  Loading section .dtors, size 0x8 lma ffffffff88017b30
=>  Loading section .rdata, size 0x2068 lma ffffffff88017b40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019ba8
=>  Loading section .data, size 0x5d4 lma ffffffff88019bc0
=>  Start address ffffffff88000004
=>  Transfer rate: 855136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[508/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:506 W:0   | mipstx39/jmr3904: spsysinit01.exe
Result: invalid   
Time: 0:00:00.254471 spsysinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18bd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x310 lma ffffffff88018bd0
=>  Loading section .init, size 0x48 lma ffffffff88018ee0
=>  Loading section .fini, size 0x30 lma ffffffff88018f28
=>  Loading section .ctors, size 0x8 lma ffffffff88018f58
=>  Loading section .dtors, size 0x8 lma ffffffff88018f60
=>  Loading section .rdata, size 0x3a44 lma ffffffff88018f70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c9b8
=>  Loading section .data, size 0x7f8 lma ffffffff8801c9d0
=>  Start address ffffffff88000004
=>  Transfer rate: 953824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[509/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:506 W:0   | mipstx39/jmr3904: spsyslock01.exe
Result: invalid   
Time: 0:00:00.257254 spsyslock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x137d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880137d0
=>  Loading section .init, size 0x48 lma ffffffff88013840
=>  Loading section .fini, size 0x30 lma ffffffff88013888
=>  Loading section .ctors, size 0x8 lma ffffffff880138b8
=>  Loading section .dtors, size 0x8 lma ffffffff880138c0
=>  Loading section .rdata, size 0x1e61 lma ffffffff880138d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015738
=>  Loading section .data, size 0x450 lma ffffffff88015750
=>  Start address ffffffff88000004
=>  Transfer rate: 711816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[510/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:506 W:0   | mipstx39/jmr3904: sptask_err01.exe
Result: invalid   
Time: 0:00:00.265929 sptask_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x108a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880108a0
=>  Loading section .init, size 0x48 lma ffffffff88010910
=>  Loading section .fini, size 0x30 lma ffffffff88010958
=>  Loading section .ctors, size 0x8 lma ffffffff88010988
=>  Loading section .dtors, size 0x8 lma ffffffff88010990
=>  Loading section .rdata, size 0x1f25 lma ffffffff880109a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128c8
=>  Loading section .data, size 0x450 lma ffffffff880128e0
=>  Start address ffffffff88000004
=>  Transfer rate: 616744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[511/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:506 W:0   | mipstx39/jmr3904: sptask_err02.exe
Result: invalid   
Time: 0:00:00.255987 sptask_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011790
=>  Loading section .init, size 0x48 lma ffffffff88011800
=>  Loading section .fini, size 0x30 lma ffffffff88011848
=>  Loading section .ctors, size 0x8 lma ffffffff88011878
=>  Loading section .dtors, size 0x8 lma ffffffff88011880
=>  Loading section .rdata, size 0x2145 lma ffffffff88011890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139d8
=>  Loading section .data, size 0x478 lma ffffffff880139f0
=>  Start address ffffffff88000004
=>  Transfer rate: 652008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[512/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:506 W:0   | mipstx39/jmr3904: sptask_err03.exe
Result: invalid   
Time: 0:00:00.256389 sptask_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c70
=>  Loading section .init, size 0x48 lma ffffffff88010ce0
=>  Loading section .fini, size 0x30 lma ffffffff88010d28
=>  Loading section .ctors, size 0x8 lma ffffffff88010d58
=>  Loading section .dtors, size 0x8 lma ffffffff88010d60
=>  Loading section .rdata, size 0x2309 lma ffffffff88010d70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013080
=>  Loading section .data, size 0x450 lma ffffffff88013098
=>  Start address ffffffff88000004
=>  Transfer rate: 632520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[513/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:506 W:0   | mipstx39/jmr3904: sptask_err04.exe
Result: invalid   
Time: 0:00:00.265063 sptask_err04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11cd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011cd0
=>  Loading section .init, size 0x48 lma ffffffff88011d40
=>  Loading section .fini, size 0x30 lma ffffffff88011d88
=>  Loading section .ctors, size 0x8 lma ffffffff88011db8
=>  Loading section .dtors, size 0x8 lma ffffffff88011dc0
=>  Loading section .rdata, size 0x248d lma ffffffff88011dd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014260
=>  Loading section .data, size 0x450 lma ffffffff88014278
=>  Start address ffffffff88000004
=>  Transfer rate: 669160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[514/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:506 W:0   | mipstx39/jmr3904: sptasknopreempt01.exe
Result: invalid   
Time: 0:00:00.262000 sptasknopreempt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c90
=>  Loading section .init, size 0x48 lma ffffffff88010d00
=>  Loading section .fini, size 0x30 lma ffffffff88010d48
=>  Loading section .ctors, size 0x8 lma ffffffff88010d78
=>  Loading section .dtors, size 0x8 lma ffffffff88010d80
=>  Loading section .rdata, size 0x19f9 lma ffffffff88010d90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012790
=>  Loading section .data, size 0x480 lma ffffffff880127a8
=>  Start address ffffffff88000004
=>  Transfer rate: 614600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[515/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:506 W:0   | mipstx39/jmr3904: spthread01.exe
Result: invalid   
Time: 0:00:00.274303 spthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x117d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880117d0
=>  Loading section .init, size 0x48 lma ffffffff88011840
=>  Loading section .fini, size 0x30 lma ffffffff88011888
=>  Loading section .ctors, size 0x8 lma ffffffff880118b8
=>  Loading section .dtors, size 0x8 lma ffffffff880118c0
=>  Loading section .rdata, size 0x1a39 lma ffffffff880118d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013310
=>  Loading section .data, size 0x450 lma ffffffff88013328
=>  Start address ffffffff88000004
=>  Transfer rate: 637768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[516/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:514 W:0   | mipstx39/jmr3904: spthreadlife01.exe
Result: invalid   
Time: 0:00:00.279015 spthreadlife01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12f20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012f20
=>  Loading section .init, size 0x48 lma ffffffff88012f90
=>  Loading section .fini, size 0x30 lma ffffffff88012fd8
=>  Loading section .ctors, size 0x8 lma ffffffff88013008
=>  Loading section .dtors, size 0x8 lma ffffffff88013010
=>  Loading section .rdata, size 0x1d05 lma ffffffff88013020
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d28
=>  Loading section .data, size 0x4b0 lma ffffffff88014d40
=>  Start address ffffffff88000004
=>  Transfer rate: 692008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[517/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:514 W:0   | mipstx39/jmr3904: spthreadq01.exe
Result: invalid   
Time: 0:00:00.268772 spthreadq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12380 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012380
=>  Loading section .init, size 0x48 lma ffffffff88012400
=>  Loading section .fini, size 0x30 lma ffffffff88012448
=>  Loading section .ctors, size 0x8 lma ffffffff88012478
=>  Loading section .dtors, size 0x8 lma ffffffff88012480
=>  Loading section .rdata, size 0x1b89 lma ffffffff88012490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014020
=>  Loading section .data, size 0x500 lma ffffffff88014038
=>  Start address ffffffff88000004
=>  Transfer rate: 665928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[518/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:514 W:0   | mipstx39/jmr3904: sptimecounter01.exe
Result: invalid   
Time: 0:00:00.261244 sptimecounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x6580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x50 lma ffffffff88006580
=>  Loading section .init, size 0x48 lma ffffffff880065d0
=>  Loading section .fini, size 0x30 lma ffffffff88006618
=>  Loading section .ctors, size 0x8 lma ffffffff88006648
=>  Loading section .dtors, size 0x8 lma ffffffff88006650
=>  Loading section .rdata, size 0x1758 lma ffffffff88006660
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88007db8
=>  Loading section .data, size 0x278 lma ffffffff88007dd0
=>  Start address ffffffff88000004
=>  Transfer rate: 262656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[519/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:514 W:0   | mipstx39/jmr3904: sptimecounter02.exe
Result: invalid   
Time: 0:00:00.262671 sptimecounter02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12470 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012470
=>  Loading section .init, size 0x48 lma ffffffff880124f0
=>  Loading section .fini, size 0x30 lma ffffffff88012538
=>  Loading section .ctors, size 0x8 lma ffffffff88012568
=>  Loading section .dtors, size 0x8 lma ffffffff88012570
=>  Loading section .rdata, size 0x1b51 lma ffffffff88012580
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140d8
=>  Loading section .data, size 0x480 lma ffffffff880140f0
=>  Start address ffffffff88000004
=>  Transfer rate: 666376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[520/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:514 W:0   | mipstx39/jmr3904: sptimecounter03.exe
Result: invalid   
Time: 0:00:00.256502 sptimecounter03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880111a0
=>  Loading section .init, size 0x48 lma ffffffff88011210
=>  Loading section .fini, size 0x30 lma ffffffff88011258
=>  Loading section .ctors, size 0x8 lma ffffffff88011288
=>  Loading section .dtors, size 0x8 lma ffffffff88011290
=>  Loading section .rdata, size 0x1a29 lma ffffffff880112a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cd0
=>  Loading section .data, size 0x480 lma ffffffff88012ce8
=>  Start address ffffffff88000004
=>  Transfer rate: 625352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[521/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:514 W:0   | mipstx39/jmr3904: sptimecounter04.exe
Result: invalid   
Time: 0:00:00.268885 sptimecounter04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10650 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010650
=>  Loading section .init, size 0x48 lma ffffffff880106c0
=>  Loading section .fini, size 0x30 lma ffffffff88010708
=>  Loading section .ctors, size 0x8 lma ffffffff88010738
=>  Loading section .dtors, size 0x8 lma ffffffff88010740
=>  Loading section .rdata, size 0x1aa5 lma ffffffff88010750
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121f8
=>  Loading section .data, size 0x450 lma ffffffff88012210
=>  Start address ffffffff88000004
=>  Transfer rate: 602792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[522/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:514 W:0   | mipstx39/jmr3904: sptimer_err01.exe
Result: invalid   
Time: 0:00:00.260987 sptimer_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12510 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012510
=>  Loading section .init, size 0x48 lma ffffffff88012580
=>  Loading section .fini, size 0x30 lma ffffffff880125c8
=>  Loading section .ctors, size 0x8 lma ffffffff880125f8
=>  Loading section .dtors, size 0x8 lma ffffffff88012600
=>  Loading section .rdata, size 0x257d lma ffffffff88012610
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014b90
=>  Loading section .data, size 0x4a8 lma ffffffff88014ba8
=>  Start address ffffffff88000004
=>  Transfer rate: 688680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[523/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:514 W:0   | mipstx39/jmr3904: sptimer_err02.exe
Result: invalid   
Time: 0:00:00.254465 sptimer_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x124c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880124c0
=>  Loading section .init, size 0x48 lma ffffffff88012530
=>  Loading section .fini, size 0x30 lma ffffffff88012578
=>  Loading section .ctors, size 0x8 lma ffffffff880125a8
=>  Loading section .dtors, size 0x8 lma ffffffff880125b0
=>  Loading section .rdata, size 0x238d lma ffffffff880125c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014950
=>  Loading section .data, size 0x4a8 lma ffffffff88014968
=>  Start address ffffffff88000004
=>  Transfer rate: 684072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[524/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptimerserver01.exe
Result: invalid   
Time: 0:00:00.361543 sptimerserver01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119a0
=>  Loading section .init, size 0x48 lma ffffffff88011a10
=>  Loading section .fini, size 0x30 lma ffffffff88011a58
=>  Loading section .ctors, size 0x8 lma ffffffff88011a88
=>  Loading section .dtors, size 0x8 lma ffffffff88011a90
=>  Loading section .rdata, size 0x1ab5 lma ffffffff88011aa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013558
=>  Loading section .data, size 0x4a8 lma ffffffff88013570
=>  Start address ffffffff88000004
=>  Transfer rate: 643176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[525/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptimespec01.exe
Result: invalid   
Time: 0:00:00.332459 sptimespec01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10db0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010db0
=>  Loading section .init, size 0x48 lma ffffffff88010e20
=>  Loading section .fini, size 0x30 lma ffffffff88010e68
=>  Loading section .ctors, size 0x8 lma ffffffff88010e98
=>  Loading section .dtors, size 0x8 lma ffffffff88010ea0
=>  Loading section .rdata, size 0x1d85 lma ffffffff88010eb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c38
=>  Loading section .data, size 0x460 lma ffffffff88012c50
=>  Start address ffffffff88000004
=>  Transfer rate: 623912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[526/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptls01.exe
Result: invalid   
Time: 0:00:00.355373 sptls01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c20
=>  Loading section .init, size 0x48 lma ffffffff88010c90
=>  Loading section .fini, size 0x30 lma ffffffff88010cd8
=>  Loading section .ctors, size 0x8 lma ffffffff88010d08
=>  Loading section .dtors, size 0x8 lma ffffffff88010d10
=>  Loading section .rdata, size 0x1a45 lma ffffffff88010d20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012768
=>  Loading section .tdata, size 0x1 lma ffffffff88012780
=>  Loading section .data, size 0x458 lma ffffffff88012788
=>  Start address ffffffff88000004
=>  Transfer rate: 614000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[527/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptls02.exe
Result: invalid   
Time: 0:00:00.355039 sptls02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2e1cc lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x74 lma ffffffff8802e1cc
=>  Loading section .init, size 0x48 lma ffffffff8802e240
=>  Loading section .fini, size 0x30 lma ffffffff8802e288
=>  Loading section .ctors, size 0x18 lma ffffffff8802e2b8
=>  Loading section .dtors, size 0x8 lma ffffffff8802e2d0
=>  Loading section .rdata, size 0x4244 lma ffffffff8802e2e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88032528
=>  Loading section .rel.dyn, size 0x10 lma ffffffff88032540
=>  Loading section .tdata, size 0x114 lma ffffffff88032600
=>  Loading section .data, size 0x668 lma ffffffff88032800
=>  Loading section .sdata, size 0x4 lma ffffffff88032e68
=>  Start address ffffffff88000004
=>  Transfer rate: 1664544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[528/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptls03.exe
Result: invalid   
Time: 0:00:00.357247 sptls03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88009520
=>  Loading section .init, size 0x48 lma ffffffff88009580
=>  Loading section .fini, size 0x30 lma ffffffff880095c8
=>  Loading section .ctors, size 0x8 lma ffffffff880095f8
=>  Loading section .dtors, size 0x8 lma ffffffff88009600
=>  Loading section .rdata, size 0x1568 lma ffffffff88009610
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800ab78
=>  Loading section .data, size 0x330 lma ffffffff8800ab90
=>  Start address ffffffff88000004
=>  Transfer rate: 357824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[529/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: sptls04.exe
Result: invalid   
Time: 0:00:00.334410 sptls04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f420
=>  Loading section .init, size 0x48 lma ffffffff8800f490
=>  Loading section .fini, size 0x30 lma ffffffff8800f4d8
=>  Loading section .ctors, size 0xc lma ffffffff8800f508
=>  Loading section .dtors, size 0x8 lma ffffffff8800f514
=>  Loading section .rdata, size 0x1995 lma ffffffff8800f520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010eb8
=>  Loading section .data, size 0x440 lma ffffffff88010ed0
=>  Start address ffffffff88000004
=>  Transfer rate: 563272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[530/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: spversion01.exe
Result: invalid   
Time: 0:00:00.324278 spversion01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf4d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f4d0
=>  Loading section .init, size 0x48 lma ffffffff8800f540
=>  Loading section .fini, size 0x30 lma ffffffff8800f588
=>  Loading section .ctors, size 0x8 lma ffffffff8800f5b8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f5c0
=>  Loading section .rdata, size 0x1a29 lma ffffffff8800f5d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011000
=>  Loading section .data, size 0x440 lma ffffffff88011018
=>  Start address ffffffff88000004
=>  Transfer rate: 565832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[531/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:522 W:0   | mipstx39/jmr3904: spwatchdog.exe
Result: invalid   
Time: 0:00:00.329776 spwatchdog.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ee0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012ee0
=>  Loading section .init, size 0x48 lma ffffffff88012f50
=>  Loading section .fini, size 0x30 lma ffffffff88012f98
=>  Loading section .ctors, size 0x8 lma ffffffff88012fc8
=>  Loading section .dtors, size 0x8 lma ffffffff88012fd0
=>  Loading section .rdata, size 0x2568 lma ffffffff88012fe0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015548
=>  Loading section .data, size 0x4c8 lma ffffffff88015560
=>  Start address ffffffff88000004
=>  Transfer rate: 708864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[532/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:530 W:0   | mipstx39/jmr3904: spwkspace.exe
Result: invalid   
Time: 0:00:00.261183 spwkspace.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fb10
=>  Loading section .init, size 0x48 lma ffffffff8800fb80
=>  Loading section .fini, size 0x30 lma ffffffff8800fbc8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fbf8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc00
=>  Loading section .rdata, size 0x1c21 lma ffffffff8800fc10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011838
=>  Loading section .data, size 0x440 lma ffffffff88011850
=>  Start address ffffffff88000004
=>  Transfer rate: 582664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[533/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:530 W:0   | mipstx39/jmr3904: tm01.exe
Result: invalid   
Time: 0:00:00.255083 tm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b00
=>  Loading section .init, size 0x48 lma ffffffff88010b70
=>  Loading section .fini, size 0x30 lma ffffffff88010bb8
=>  Loading section .ctors, size 0x8 lma ffffffff88010be8
=>  Loading section .dtors, size 0x8 lma ffffffff88010bf0
=>  Loading section .rdata, size 0x1e7d lma ffffffff88010c00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a80
=>  Loading section .data, size 0x470 lma ffffffff88012a98
=>  Start address ffffffff88000004
=>  Transfer rate: 620520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[534/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:530 W:0   | mipstx39/jmr3904: tm02.exe
Result: invalid   
Time: 0:00:00.256682 tm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010530
=>  Loading section .init, size 0x48 lma ffffffff880105a0
=>  Loading section .fini, size 0x30 lma ffffffff880105e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010618
=>  Loading section .dtors, size 0x8 lma ffffffff88010620
=>  Loading section .rdata, size 0x1e9d lma ffffffff88010630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124d0
=>  Loading section .data, size 0x470 lma ffffffff880124e8
=>  Start address ffffffff88000004
=>  Transfer rate: 608872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[535/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:530 W:0   | mipstx39/jmr3904: tm03.exe
Result: invalid   
Time: 0:00:00.257663 tm03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a70
=>  Loading section .init, size 0x48 lma ffffffff88010ae0
=>  Loading section .fini, size 0x30 lma ffffffff88010b28
=>  Loading section .ctors, size 0x8 lma ffffffff88010b58
=>  Loading section .dtors, size 0x8 lma ffffffff88010b60
=>  Loading section .rdata, size 0x1e65 lma ffffffff88010b70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129d8
=>  Loading section .data, size 0x470 lma ffffffff880129f0
=>  Start address ffffffff88000004
=>  Transfer rate: 619176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[536/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:530 W:0   | mipstx39/jmr3904: tm04.exe
Result: invalid   
Time: 0:00:00.262425 tm04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12160 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012160
=>  Loading section .init, size 0x48 lma ffffffff880121d0
=>  Loading section .fini, size 0x30 lma ffffffff88012218
=>  Loading section .ctors, size 0x8 lma ffffffff88012248
=>  Loading section .dtors, size 0x8 lma ffffffff88012250
=>  Loading section .rdata, size 0x20dd lma ffffffff88012260
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014340
=>  Loading section .data, size 0x470 lma ffffffff88014358
=>  Start address ffffffff88000004
=>  Transfer rate: 671208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[537/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:530 W:0   | mipstx39/jmr3904: tm05.exe
Result: invalid   
Time: 0:00:00.256539 tm05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf9b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f9b0
=>  Loading section .init, size 0x48 lma ffffffff8800fa20
=>  Loading section .fini, size 0x30 lma ffffffff8800fa68
=>  Loading section .ctors, size 0x8 lma ffffffff8800fa98
=>  Loading section .dtors, size 0x8 lma ffffffff8800faa0
=>  Loading section .rdata, size 0x1ded lma ffffffff8800fab0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118a0
=>  Loading section .data, size 0x440 lma ffffffff880118b8
=>  Start address ffffffff88000004
=>  Transfer rate: 583528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[538/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:530 W:0   | mipstx39/jmr3904: tm06.exe
Result: invalid   
Time: 0:00:00.259178 tm06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010270
=>  Loading section .init, size 0x48 lma ffffffff880102e0
=>  Loading section .fini, size 0x30 lma ffffffff88010328
=>  Loading section .ctors, size 0x8 lma ffffffff88010358
=>  Loading section .dtors, size 0x8 lma ffffffff88010360
=>  Loading section .rdata, size 0x1e65 lma ffffffff88010370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121d8
=>  Loading section .data, size 0x440 lma ffffffff880121f0
=>  Start address ffffffff88000004
=>  Transfer rate: 602408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[539/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:530 W:0   | mipstx39/jmr3904: tm07.exe
Result: invalid   
Time: 0:00:00.259785 tm07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfcf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fcf0
=>  Loading section .init, size 0x48 lma ffffffff8800fd60
=>  Loading section .fini, size 0x30 lma ffffffff8800fda8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fdd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fde0
=>  Loading section .rdata, size 0x1dc5 lma ffffffff8800fdf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011bb8
=>  Loading section .data, size 0x440 lma ffffffff88011bd0
=>  Start address ffffffff88000004
=>  Transfer rate: 589864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[540/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:538 W:0   | mipstx39/jmr3904: tm08.exe
Result: invalid   
Time: 0:00:00.272768 tm08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11190 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011190
=>  Loading section .init, size 0x48 lma ffffffff88011200
=>  Loading section .fini, size 0x30 lma ffffffff88011248
=>  Loading section .ctors, size 0x8 lma ffffffff88011278
=>  Loading section .dtors, size 0x8 lma ffffffff88011280
=>  Loading section .rdata, size 0x1fb5 lma ffffffff88011290
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013248
=>  Loading section .data, size 0x478 lma ffffffff88013260
=>  Start address ffffffff88000004
=>  Transfer rate: 636520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[541/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:538 W:0   | mipstx39/jmr3904: tm09.exe
Result: invalid   
Time: 0:00:00.276064 tm09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109d0
=>  Loading section .init, size 0x48 lma ffffffff88010a40
=>  Loading section .fini, size 0x30 lma ffffffff88010a88
=>  Loading section .ctors, size 0x8 lma ffffffff88010ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ac0
=>  Loading section .rdata, size 0x1ef5 lma ffffffff88010ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129c8
=>  Loading section .data, size 0x470 lma ffffffff880129e0
=>  Start address ffffffff88000004
=>  Transfer rate: 619048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[542/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:538 W:0   | mipstx39/jmr3904: tm10.exe
Result: invalid   
Time: 0:00:00.256861 tm10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10360 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010360
=>  Loading section .init, size 0x48 lma ffffffff880103d0
=>  Loading section .fini, size 0x30 lma ffffffff88010418
=>  Loading section .ctors, size 0x8 lma ffffffff88010448
=>  Loading section .dtors, size 0x8 lma ffffffff88010450
=>  Loading section .rdata, size 0x1e45 lma ffffffff88010460
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122a8
=>  Loading section .data, size 0x470 lma ffffffff880122c0
=>  Start address ffffffff88000004
=>  Transfer rate: 604456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[543/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:538 W:0   | mipstx39/jmr3904: tm11.exe
Result: invalid   
Time: 0:00:00.262475 tm11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106f0
=>  Loading section .init, size 0x48 lma ffffffff88010760
=>  Loading section .fini, size 0x30 lma ffffffff880107a8
=>  Loading section .ctors, size 0x8 lma ffffffff880107d8
=>  Loading section .dtors, size 0x8 lma ffffffff880107e0
=>  Loading section .rdata, size 0x1e35 lma ffffffff880107f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012628
=>  Loading section .data, size 0x470 lma ffffffff88012640
=>  Start address ffffffff88000004
=>  Transfer rate: 611624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[544/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:538 W:0   | mipstx39/jmr3904: tm12.exe
Result: invalid   
Time: 0:00:00.267779 tm12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10730 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010730
=>  Loading section .init, size 0x48 lma ffffffff880107a0
=>  Loading section .fini, size 0x30 lma ffffffff880107e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010818
=>  Loading section .dtors, size 0x8 lma ffffffff88010820
=>  Loading section .rdata, size 0x1e35 lma ffffffff88010830
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012668
=>  Loading section .data, size 0x470 lma ffffffff88012680
=>  Start address ffffffff88000004
=>  Transfer rate: 612136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[545/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:538 W:0   | mipstx39/jmr3904: tm13.exe
Result: invalid   
Time: 0:00:00.282603 tm13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106e0
=>  Loading section .init, size 0x48 lma ffffffff88010750
=>  Loading section .fini, size 0x30 lma ffffffff88010798
=>  Loading section .ctors, size 0x8 lma ffffffff880107c8
=>  Loading section .dtors, size 0x8 lma ffffffff880107d0
=>  Loading section .rdata, size 0x1e35 lma ffffffff880107e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012618
=>  Loading section .data, size 0x470 lma ffffffff88012630
=>  Start address ffffffff88000004
=>  Transfer rate: 611496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[546/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:538 W:0   | mipstx39/jmr3904: tm14.exe
Result: invalid   
Time: 0:00:00.265683 tm14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10730 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010730
=>  Loading section .init, size 0x48 lma ffffffff880107a0
=>  Loading section .fini, size 0x30 lma ffffffff880107e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010818
=>  Loading section .dtors, size 0x8 lma ffffffff88010820
=>  Loading section .rdata, size 0x1e35 lma ffffffff88010830
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012668
=>  Loading section .data, size 0x470 lma ffffffff88012680
=>  Start address ffffffff88000004
=>  Transfer rate: 612136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[547/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:538 W:0   | mipstx39/jmr3904: tm15.exe
Result: invalid   
Time: 0:00:00.257969 tm15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfea0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fea0
=>  Loading section .init, size 0x48 lma ffffffff8800ff10
=>  Loading section .fini, size 0x30 lma ffffffff8800ff58
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff88
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff90
=>  Loading section .rdata, size 0x1ed5 lma ffffffff8800ffa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e78
=>  Loading section .data, size 0x440 lma ffffffff88011e90
=>  Start address ffffffff88000004
=>  Transfer rate: 595496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[548/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:546 W:0   | mipstx39/jmr3904: tm16.exe
Result: invalid   
Time: 0:00:00.281384 tm16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd70
=>  Loading section .init, size 0x48 lma ffffffff8800fde0
=>  Loading section .fini, size 0x30 lma ffffffff8800fe28
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe58
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe60
=>  Loading section .rdata, size 0x1e0d lma ffffffff8800fe70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c80
=>  Loading section .data, size 0x440 lma ffffffff88011c98
=>  Start address ffffffff88000004
=>  Transfer rate: 591464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[549/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:546 W:0   | mipstx39/jmr3904: tm17.exe
Result: invalid   
Time: 0:00:00.259945 tm17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfaf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800faf0
=>  Loading section .init, size 0x48 lma ffffffff8800fb60
=>  Loading section .fini, size 0x30 lma ffffffff8800fba8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fbd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fbe0
=>  Loading section .rdata, size 0x1dcd lma ffffffff8800fbf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119c0
=>  Loading section .data, size 0x440 lma ffffffff880119d8
=>  Start address ffffffff88000004
=>  Transfer rate: 585832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[550/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:546 W:0   | mipstx39/jmr3904: tm18.exe
Result: invalid   
Time: 0:00:00.266857 tm18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf760 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f760
=>  Loading section .init, size 0x48 lma ffffffff8800f7d0
=>  Loading section .fini, size 0x30 lma ffffffff8800f818
=>  Loading section .ctors, size 0x8 lma ffffffff8800f848
=>  Loading section .dtors, size 0x8 lma ffffffff8800f850
=>  Loading section .rdata, size 0x1dbd lma ffffffff8800f860
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011620
=>  Loading section .data, size 0x440 lma ffffffff88011638
=>  Start address ffffffff88000004
=>  Transfer rate: 578408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[551/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:546 W:0   | mipstx39/jmr3904: tm19.exe
Result: invalid   
Time: 0:00:00.266804 tm19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10240 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010240
=>  Loading section .init, size 0x48 lma ffffffff880102b0
=>  Loading section .fini, size 0x30 lma ffffffff880102f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010328
=>  Loading section .dtors, size 0x8 lma ffffffff88010330
=>  Loading section .rdata, size 0x1f1d lma ffffffff88010340
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012260
=>  Loading section .data, size 0x440 lma ffffffff88012278
=>  Start address ffffffff88000004
=>  Transfer rate: 603496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[552/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:546 W:0   | mipstx39/jmr3904: tm20.exe
Result: invalid   
Time: 0:00:00.265237 tm20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x118b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880118b0
=>  Loading section .init, size 0x48 lma ffffffff88011930
=>  Loading section .fini, size 0x30 lma ffffffff88011978
=>  Loading section .ctors, size 0x8 lma ffffffff880119a8
=>  Loading section .dtors, size 0x8 lma ffffffff880119b0
=>  Loading section .rdata, size 0x21b5 lma ffffffff880119c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013b78
=>  Loading section .data, size 0x4b8 lma ffffffff88013b90
=>  Start address ffffffff88000004
=>  Transfer rate: 655848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[553/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:546 W:0   | mipstx39/jmr3904: tm21.exe
Result: invalid   
Time: 0:00:00.259021 tm21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11280 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff88011280
=>  Loading section .init, size 0x48 lma ffffffff88011310
=>  Loading section .fini, size 0x30 lma ffffffff88011358
=>  Loading section .ctors, size 0x8 lma ffffffff88011388
=>  Loading section .dtors, size 0x8 lma ffffffff88011390
=>  Loading section .rdata, size 0x1f85 lma ffffffff880113a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013328
=>  Loading section .data, size 0x590 lma ffffffff88013340
=>  Start address ffffffff88000004
=>  Transfer rate: 640552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[554/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:546 W:0   | mipstx39/jmr3904: tm22.exe
Result: invalid   
Time: 0:00:00.264698 tm22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x108e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880108e0
=>  Loading section .init, size 0x48 lma ffffffff88010950
=>  Loading section .fini, size 0x30 lma ffffffff88010998
=>  Loading section .ctors, size 0x8 lma ffffffff880109c8
=>  Loading section .dtors, size 0x8 lma ffffffff880109d0
=>  Loading section .rdata, size 0x1f05 lma ffffffff880109e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128e8
=>  Loading section .data, size 0x470 lma ffffffff88012900
=>  Start address ffffffff88000004
=>  Transfer rate: 617256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[555/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:546 W:0   | mipstx39/jmr3904: tm23.exe
Result: invalid   
Time: 0:00:00.259280 tm23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880114c0
=>  Loading section .init, size 0x48 lma ffffffff88011530
=>  Loading section .fini, size 0x30 lma ffffffff88011578
=>  Loading section .ctors, size 0x8 lma ffffffff880115a8
=>  Loading section .dtors, size 0x8 lma ffffffff880115b0
=>  Loading section .rdata, size 0x2019 lma ffffffff880115c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880135e0
=>  Loading section .data, size 0x4a8 lma ffffffff880135f8
=>  Start address ffffffff88000004
=>  Transfer rate: 644232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[556/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:554 W:0   | mipstx39/jmr3904: tm24.exe
Result: invalid   
Time: 0:00:00.260476 tm24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf8c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f8c0
=>  Loading section .init, size 0x48 lma ffffffff8800f930
=>  Loading section .fini, size 0x30 lma ffffffff8800f978
=>  Loading section .ctors, size 0x8 lma ffffffff8800f9a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f9b0
=>  Loading section .rdata, size 0x1e15 lma ffffffff8800f9c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880117d8
=>  Loading section .data, size 0x440 lma ffffffff880117f0
=>  Start address ffffffff88000004
=>  Transfer rate: 581928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[557/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:554 W:0   | mipstx39/jmr3904: tm25.exe
Result: invalid   
Time: 0:00:00.260714 tm25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107c0
=>  Loading section .init, size 0x48 lma ffffffff88010830
=>  Loading section .fini, size 0x30 lma ffffffff88010878
=>  Loading section .ctors, size 0x8 lma ffffffff880108a8
=>  Loading section .dtors, size 0x8 lma ffffffff880108b0
=>  Loading section .rdata, size 0x1e29 lma ffffffff880108c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126f0
=>  Loading section .data, size 0x480 lma ffffffff88012708
=>  Start address ffffffff88000004
=>  Transfer rate: 613320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[558/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:554 W:0   | mipstx39/jmr3904: tm26.exe
Result: invalid   
Time: 0:00:00.257490 tm26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18ef0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018ef0
=>  Loading section .init, size 0x48 lma ffffffff88018f60
=>  Loading section .fini, size 0x30 lma ffffffff88018fa8
=>  Loading section .ctors, size 0x8 lma ffffffff88018fd8
=>  Loading section .dtors, size 0x8 lma ffffffff88018fe0
=>  Loading section .rdata, size 0x2880 lma ffffffff88018ff0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b870
=>  Loading section .data, size 0x604 lma ffffffff8801b888
=>  Start address ffffffff88000004
=>  Transfer rate: 914464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[559/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:554 W:0   | mipstx39/jmr3904: tm27.exe
Result: invalid   
Time: 0:00:00.258551 tm27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110b0
=>  Loading section .init, size 0x48 lma ffffffff88011120
=>  Loading section .fini, size 0x30 lma ffffffff88011168
=>  Loading section .ctors, size 0x8 lma ffffffff88011198
=>  Loading section .dtors, size 0x8 lma ffffffff880111a0
=>  Loading section .rdata, size 0x1f54 lma ffffffff880111b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013108
=>  Loading section .data, size 0x440 lma ffffffff88013120
=>  Start address ffffffff88000004
=>  Transfer rate: 633504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[560/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:554 W:0   | mipstx39/jmr3904: tm28.exe
Result: invalid   
Time: 0:00:00.261717 tm28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fb90
=>  Loading section .init, size 0x48 lma ffffffff8800fc00
=>  Loading section .fini, size 0x30 lma ffffffff8800fc48
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc78
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc80
=>  Loading section .rdata, size 0x1e2d lma ffffffff8800fc90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ac0
=>  Loading section .data, size 0x470 lma ffffffff88011ad8
=>  Start address ffffffff88000004
=>  Transfer rate: 588264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[561/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:554 W:0   | mipstx39/jmr3904: tm29.exe
Result: invalid   
Time: 0:00:00.252046 tm29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107b0
=>  Loading section .init, size 0x48 lma ffffffff88010820
=>  Loading section .fini, size 0x30 lma ffffffff88010868
=>  Loading section .ctors, size 0x8 lma ffffffff88010898
=>  Loading section .dtors, size 0x8 lma ffffffff880108a0
=>  Loading section .rdata, size 0x1f4d lma ffffffff880108b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012800
=>  Loading section .data, size 0x470 lma ffffffff88012818
=>  Start address ffffffff88000004
=>  Transfer rate: 615400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[562/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:554 W:0   | mipstx39/jmr3904: tm30.exe
Result: invalid   
Time: 0:00:00.266311 tm30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfcc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fcc0
=>  Loading section .init, size 0x48 lma ffffffff8800fd30
=>  Loading section .fini, size 0x30 lma ffffffff8800fd78
=>  Loading section .ctors, size 0x8 lma ffffffff8800fda8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fdb0
=>  Loading section .rdata, size 0x1e25 lma ffffffff8800fdc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011be8
=>  Loading section .data, size 0x470 lma ffffffff88011c00
=>  Start address ffffffff88000004
=>  Transfer rate: 590632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[563/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:554 W:0   | mipstx39/jmr3904: tm31.exe
Result: invalid   
Time: 0:00:00.257228 tm31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010530
=>  Loading section .init, size 0x48 lma ffffffff880105a0
=>  Loading section .fini, size 0x30 lma ffffffff880105e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010618
=>  Loading section .dtors, size 0x8 lma ffffffff88010620
=>  Loading section .rdata, size 0x1ead lma ffffffff88010630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e0
=>  Loading section .data, size 0x470 lma ffffffff880124f8
=>  Start address ffffffff88000004
=>  Transfer rate: 609000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[564/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:562 W:0   | mipstx39/jmr3904: tm32.exe
Result: invalid   
Time: 0:00:00.267225 tm32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a70
=>  Loading section .init, size 0x48 lma ffffffff88010ae0
=>  Loading section .fini, size 0x30 lma ffffffff88010b28
=>  Loading section .ctors, size 0x8 lma ffffffff88010b58
=>  Loading section .dtors, size 0x8 lma ffffffff88010b60
=>  Loading section .rdata, size 0x1e75 lma ffffffff88010b70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129e8
=>  Loading section .data, size 0x470 lma ffffffff88012a00
=>  Start address ffffffff88000004
=>  Transfer rate: 619304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[565/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:562 W:0   | mipstx39/jmr3904: tm33.exe
Result: invalid   
Time: 0:00:00.271458 tm33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010530
=>  Loading section .init, size 0x48 lma ffffffff880105a0
=>  Loading section .fini, size 0x30 lma ffffffff880105e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010618
=>  Loading section .dtors, size 0x8 lma ffffffff88010620
=>  Loading section .rdata, size 0x1ea5 lma ffffffff88010630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124d8
=>  Loading section .data, size 0x470 lma ffffffff880124f0
=>  Start address ffffffff88000004
=>  Transfer rate: 608936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[566/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:562 W:0   | mipstx39/jmr3904: tm34.exe
Result: invalid   
Time: 0:00:00.261890 tm34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a70
=>  Loading section .init, size 0x48 lma ffffffff88010ae0
=>  Loading section .fini, size 0x30 lma ffffffff88010b28
=>  Loading section .ctors, size 0x8 lma ffffffff88010b58
=>  Loading section .dtors, size 0x8 lma ffffffff88010b60
=>  Loading section .rdata, size 0x1e75 lma ffffffff88010b70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129e8
=>  Loading section .data, size 0x470 lma ffffffff88012a00
=>  Start address ffffffff88000004
=>  Transfer rate: 619304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[567/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:562 W:0   | mipstx39/jmr3904: tm35.exe
Result: invalid   
Time: 0:00:00.253364 tm35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010530
=>  Loading section .init, size 0x48 lma ffffffff880105a0
=>  Loading section .fini, size 0x30 lma ffffffff880105e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010618
=>  Loading section .dtors, size 0x8 lma ffffffff88010620
=>  Loading section .rdata, size 0x1ead lma ffffffff88010630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e0
=>  Loading section .data, size 0x470 lma ffffffff880124f8
=>  Start address ffffffff88000004
=>  Transfer rate: 609000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[568/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:562 W:0   | mipstx39/jmr3904: tm36.exe
Result: invalid   
Time: 0:00:00.262366 tm36.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a70
=>  Loading section .init, size 0x48 lma ffffffff88010ae0
=>  Loading section .fini, size 0x30 lma ffffffff88010b28
=>  Loading section .ctors, size 0x8 lma ffffffff88010b58
=>  Loading section .dtors, size 0x8 lma ffffffff88010b60
=>  Loading section .rdata, size 0x1e75 lma ffffffff88010b70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129e8
=>  Loading section .data, size 0x470 lma ffffffff88012a00
=>  Start address ffffffff88000004
=>  Transfer rate: 619304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[569/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:562 W:0   | mipstx39/jmr3904: tmck.exe
Result: invalid   
Time: 0:00:00.259601 tmck.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f950
=>  Loading section .init, size 0x48 lma ffffffff8800f9c0
=>  Loading section .fini, size 0x30 lma ffffffff8800fa08
=>  Loading section .ctors, size 0x8 lma ffffffff8800fa38
=>  Loading section .dtors, size 0x8 lma ffffffff8800fa40
=>  Loading section .rdata, size 0x1f01 lma ffffffff8800fa50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011958
=>  Loading section .data, size 0x440 lma ffffffff88011970
=>  Start address ffffffff88000004
=>  Transfer rate: 584968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[570/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:562 W:0   | mipstx39/jmr3904: tmcontext01.exe
Result: invalid   
Time: 0:00:00.266184 tmcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x104b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880104b0
=>  Loading section .init, size 0x48 lma ffffffff88010520
=>  Loading section .fini, size 0x30 lma ffffffff88010568
=>  Loading section .ctors, size 0x8 lma ffffffff88010598
=>  Loading section .dtors, size 0x8 lma ffffffff880105a0
=>  Loading section .rdata, size 0x1ac5 lma ffffffff880105b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012078
=>  Loading section .data, size 0x440 lma ffffffff88012090
=>  Start address ffffffff88000004
=>  Transfer rate: 599592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[571/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:562 W:0   | mipstx39/jmr3904: tmfine01.exe
Result: invalid   
Time: 0:00:00.261201 tmfine01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14d70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014d70
=>  Loading section .init, size 0x48 lma ffffffff88014df0
=>  Loading section .fini, size 0x30 lma ffffffff88014e38
=>  Loading section .ctors, size 0x8 lma ffffffff88014e68
=>  Loading section .dtors, size 0x8 lma ffffffff88014e70
=>  Loading section .rdata, size 0x1c91 lma ffffffff88014e80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016b18
=>  Loading section .data, size 0x4e0 lma ffffffff88016b30
=>  Start address ffffffff88000004
=>  Transfer rate: 753672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[572/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:570 W:0   | mipstx39/jmr3904: tmonetoone.exe
Result: invalid   
Time: 0:00:00.262301 tmonetoone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ef0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ef0
=>  Loading section .init, size 0x48 lma ffffffff88011f60
=>  Loading section .fini, size 0x30 lma ffffffff88011fa8
=>  Loading section .ctors, size 0x8 lma ffffffff88011fd8
=>  Loading section .dtors, size 0x8 lma ffffffff88011fe0
=>  Loading section .rdata, size 0x1aa9 lma ffffffff88011ff0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013aa0
=>  Loading section .data, size 0x480 lma ffffffff88013ab8
=>  Start address ffffffff88000004
=>  Transfer rate: 653640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[573/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:570 W:0   | mipstx39/jmr3904: tmtimer01.exe
Result: invalid   
Time: 0:00:00.260272 tmtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88010e60
=>  Loading section .init, size 0x48 lma ffffffff88010ee0
=>  Loading section .fini, size 0x30 lma ffffffff88010f28
=>  Loading section .ctors, size 0x8 lma ffffffff88010f58
=>  Loading section .dtors, size 0x8 lma ffffffff88010f60
=>  Loading section .rdata, size 0x1b08 lma ffffffff88010f70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a78
=>  Loading section .data, size 0x480 lma ffffffff88012a90
=>  Start address ffffffff88000004
=>  Transfer rate: 620608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[574/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:570 W:0   | mipstx39/jmr3904: ts-unit-no-clock-0.exe
Result: invalid   
Time: 0:00:00.256918 ts-unit-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf5c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800f5c0
=>  Loading section .init, size 0x48 lma ffffffff8800f640
=>  Loading section .fini, size 0x30 lma ffffffff8800f688
=>  Loading section .ctors, size 0x8 lma ffffffff8800f6b8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f6c0
=>  Loading section .rdata, size 0x4968 lma ffffffff8800f6d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014038
=>  Loading section .data, size 0x248 lma ffffffff88014050
=>  Start address ffffffff88000004
=>  Transfer rate: 660608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[575/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:570 W:0   | mipstx39/jmr3904: ts-fatal-init-task-construct-failed.exe
Result: invalid   
Time: 0:00:00.255354 ts-fatal-init-task-construct-failed.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xcee0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800cee0
=>  Loading section .init, size 0x48 lma ffffffff8800cf60
=>  Loading section .fini, size 0x30 lma ffffffff8800cfa8
=>  Loading section .ctors, size 0x8 lma ffffffff8800cfd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800cfe0
=>  Loading section .rdata, size 0x18c0 lma ffffffff8800cff0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e8b0
=>  Loading section .data, size 0x22c lma ffffffff8800e8c8
=>  Start address ffffffff88000004
=>  Transfer rate: 481120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[576/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:570 W:0   | mipstx39/jmr3904: ts-fatal-too-large-tls-size.exe
Result: invalid   
Time: 0:00:00.256142 ts-fatal-too-large-tls-size.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xa220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800a220
=>  Loading section .init, size 0x48 lma ffffffff8800a290
=>  Loading section .fini, size 0x30 lma ffffffff8800a2d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800a308
=>  Loading section .dtors, size 0x8 lma ffffffff8800a310
=>  Loading section .rdata, size 0x183c lma ffffffff8800a320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800bb60
=>  Loading section .data, size 0x204 lma ffffffff8800bb78
=>  Start address ffffffff88000004
=>  Transfer rate: 387968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[577/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:570 W:0   | mipstx39/jmr3904: ts-performance-no-clock-0.exe
Result: invalid   
Time: 0:00:00.259272 ts-performance-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x175d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xa0 lma ffffffff880175d0
=>  Loading section .init, size 0x48 lma ffffffff88017670
=>  Loading section .fini, size 0x30 lma ffffffff880176b8
=>  Loading section .ctors, size 0x8 lma ffffffff880176e8
=>  Loading section .dtors, size 0x8 lma ffffffff880176f0
=>  Loading section .rdata, size 0x2730 lma ffffffff88017700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019e30
=>  Loading section .data, size 0x3c4 lma ffffffff88019e48
=>  Start address ffffffff88000004
=>  Transfer rate: 856096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[578/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:570 W:0   | mipstx39/jmr3904: ts-terminate.exe
Result: invalid   
Time: 0:00:00.255552 ts-terminate.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10dd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010dd0
=>  Loading section .init, size 0x48 lma ffffffff88010e40
=>  Loading section .fini, size 0x30 lma ffffffff88010e88
=>  Loading section .ctors, size 0x8 lma ffffffff88010eb8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ec0
=>  Loading section .rdata, size 0x1ed4 lma ffffffff88010ed0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012da8
=>  Loading section .data, size 0x220 lma ffffffff88012dc0
=>  Start address ffffffff88000004
=>  Transfer rate: 622240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[579/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:570 W:0   | mipstx39/jmr3904: ts-userext.exe
Result: invalid   
Time: 0:00:00.272880 ts-userext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12680 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012680
=>  Loading section .init, size 0x48 lma ffffffff88012700
=>  Loading section .fini, size 0x30 lma ffffffff88012748
=>  Loading section .ctors, size 0x8 lma ffffffff88012778
=>  Loading section .dtors, size 0x8 lma ffffffff88012780
=>  Loading section .rdata, size 0x20fc lma ffffffff88012790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014890
=>  Loading section .data, size 0x268 lma ffffffff880148a8
=>  Start address ffffffff88000004
=>  Transfer rate: 677920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[580/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:578 W:0   | mipstx39/jmr3904: ts-validation-0.exe
Result: invalid   
Time: 0:00:00.257097 ts-validation-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14f30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014f30
=>  Loading section .init, size 0x48 lma ffffffff88014fb0
=>  Loading section .fini, size 0x30 lma ffffffff88014ff8
=>  Loading section .ctors, size 0x8 lma ffffffff88015028
=>  Loading section .dtors, size 0x8 lma ffffffff88015030
=>  Loading section .rdata, size 0x2430 lma ffffffff88015040
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017470
=>  Loading section .data, size 0x37c lma ffffffff88017488
=>  Start address ffffffff88000004
=>  Transfer rate: 770016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[581/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:578 W:0   | mipstx39/jmr3904: ts-validation-1.exe
Result: invalid   
Time: 0:00:00.260333 ts-validation-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x121f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880121f0
=>  Loading section .init, size 0x48 lma ffffffff88012270
=>  Loading section .fini, size 0x30 lma ffffffff880122b8
=>  Loading section .ctors, size 0x8 lma ffffffff880122e8
=>  Loading section .dtors, size 0x8 lma ffffffff880122f0
=>  Loading section .rdata, size 0xe3c0 lma ffffffff88012300
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880206c0
=>  Loading section .data, size 0x268 lma ffffffff880206d8
=>  Start address ffffffff88000004
=>  Transfer rate: 1067456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[582/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:578 W:0   | mipstx39/jmr3904: ts-validation-acfg-0.exe
Result: invalid   
Time: 0:00:00.254535 ts-validation-acfg-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xdff0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff8800dff0
=>  Loading section .init, size 0x48 lma ffffffff8800e080
=>  Loading section .fini, size 0x30 lma ffffffff8800e0c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800e0f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800e100
=>  Loading section .rdata, size 0x1c5c lma ffffffff8800e110
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800fd70
=>  Loading section .data, size 0x32c lma ffffffff8800fd88
=>  Start address ffffffff88000004
=>  Transfer rate: 525632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[583/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:578 W:0   | mipstx39/jmr3904: ts-validation-acfg-1.exe
Result: invalid   
Time: 0:00:00.261016 ts-validation-acfg-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xcbf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800cbf0
=>  Loading section .init, size 0x48 lma ffffffff8800cc60
=>  Loading section .fini, size 0x30 lma ffffffff8800cca8
=>  Loading section .ctors, size 0x8 lma ffffffff8800ccd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800cce0
=>  Loading section .rdata, size 0x1844 lma ffffffff8800ccf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e538
=>  Loading section .data, size 0x1cc lma ffffffff8800e550
=>  Start address ffffffff88000004
=>  Transfer rate: 473216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[584/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:578 W:0   | mipstx39/jmr3904: ts-validation-cache.exe
Result: invalid   
Time: 0:00:00.265347 ts-validation-cache.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88010b50
=>  Loading section .init, size 0x48 lma ffffffff88010bd0
=>  Loading section .fini, size 0x30 lma ffffffff88010c18
=>  Loading section .ctors, size 0x8 lma ffffffff88010c48
=>  Loading section .dtors, size 0x8 lma ffffffff88010c50
=>  Loading section .rdata, size 0x1d5c lma ffffffff88010c60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129c0
=>  Loading section .data, size 0x254 lma ffffffff880129d8
=>  Start address ffffffff88000004
=>  Transfer rate: 614656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[585/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:578 W:0   | mipstx39/jmr3904: ts-validation-intr.exe
Result: invalid   
Time: 0:00:00.260021 ts-validation-intr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17000 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xb0 lma ffffffff88017000
=>  Loading section .init, size 0x48 lma ffffffff880170b0
=>  Loading section .fini, size 0x30 lma ffffffff880170f8
=>  Loading section .ctors, size 0x8 lma ffffffff88017128
=>  Loading section .dtors, size 0x8 lma ffffffff88017130
=>  Loading section .rdata, size 0x4380 lma ffffffff88017140
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b4c0
=>  Loading section .data, size 0x410 lma ffffffff8801b4d8
=>  Start address ffffffff88000004
=>  Transfer rate: 902912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[586/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:578 W:0   | mipstx39/jmr3904: ts-validation-io-kernel.exe
Result: invalid   
Time: 0:00:00.262900 ts-validation-io-kernel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x8fe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88008fe0
=>  Loading section .init, size 0x48 lma ffffffff88009040
=>  Loading section .fini, size 0x30 lma ffffffff88009088
=>  Loading section .ctors, size 0x8 lma ffffffff880090b8
=>  Loading section .dtors, size 0x8 lma ffffffff880090c0
=>  Loading section .rdata, size 0x1728 lma ffffffff880090d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800a7f8
=>  Loading section .data, size 0x7c lma ffffffff8800a810
=>  Start address ffffffff88000004
=>  Transfer rate: 345120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[587/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:578 W:0   | mipstx39/jmr3904: ts-validation-no-clock-0.exe
Result: invalid   
Time: 0:00:00.260796 ts-validation-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x49f70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x240 lma ffffffff88049f70
=>  Loading section .init, size 0x48 lma ffffffff8804a1b0
=>  Loading section .fini, size 0x30 lma ffffffff8804a1f8
=>  Loading section .ctors, size 0x8 lma ffffffff8804a228
=>  Loading section .dtors, size 0x8 lma ffffffff8804a230
=>  Loading section .rdata, size 0x19b8c lma ffffffff8804a240
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88063dd0
=>  Loading section .data, size 0x1358 lma ffffffff88063de8
=>  Loading section .rtemsrwset, size 0x4 lma ffffffff88065140
=>  Start address ffffffff88000004
=>  Transfer rate: 3312064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[588/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:586 W:0   | mipstx39/jmr3904: ts-validation-non-smp.exe
Result: invalid   
Time: 0:00:00.255545 ts-validation-non-smp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88010400
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1dd4 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122e8
=>  Loading section .data, size 0x264 lma ffffffff88012300
=>  Start address ffffffff88000004
=>  Transfer rate: 600768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[589/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:586 W:0   | mipstx39/jmr3904: ts-validation-one-cpu-0.exe
Result: invalid   
Time: 0:00:00.256510 ts-validation-one-cpu-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b490 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xc0 lma ffffffff8801b490
=>  Loading section .init, size 0x48 lma ffffffff8801b550
=>  Loading section .fini, size 0x30 lma ffffffff8801b598
=>  Loading section .ctors, size 0x8 lma ffffffff8801b5c8
=>  Loading section .dtors, size 0x8 lma ffffffff8801b5d0
=>  Loading section .rdata, size 0x5f48 lma ffffffff8801b5e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021528
=>  Loading section .data, size 0x484 lma ffffffff88021540
=>  Start address ffffffff88000004
=>  Transfer rate: 1101280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[590/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:586 W:0   | mipstx39/jmr3904: ts-validation-one-cpu-1.exe
Result: invalid   
Time: 0:00:00.256725 ts-validation-one-cpu-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ba0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ba0
=>  Loading section .init, size 0x48 lma ffffffff88010c10
=>  Loading section .fini, size 0x30 lma ffffffff88010c58
=>  Loading section .ctors, size 0x8 lma ffffffff88010c88
=>  Loading section .dtors, size 0x8 lma ffffffff88010c90
=>  Loading section .rdata, size 0xe3b8 lma ffffffff88010ca0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f058
=>  Loading section .data, size 0x24c lma ffffffff8801f070
=>  Start address ffffffff88000004
=>  Transfer rate: 1021344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[591/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:586 W:0   | mipstx39/jmr3904: ts-validation-timecounter-0.exe
Result: invalid   
Time: 0:00:00.261210 ts-validation-timecounter-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11bc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011bc0
=>  Loading section .init, size 0x48 lma ffffffff88011c30
=>  Loading section .fini, size 0x30 lma ffffffff88011c78
=>  Loading section .ctors, size 0x8 lma ffffffff88011ca8
=>  Loading section .dtors, size 0x8 lma ffffffff88011cb0
=>  Loading section .rdata, size 0x23c8 lma ffffffff88011cc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014088
=>  Loading section .data, size 0x248 lma ffffffff880140a0
=>  Start address ffffffff88000004
=>  Transfer rate: 661248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[592/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:586 W:0   | mipstx39/jmr3904: ts-validation-timecounter-1.exe
Result: invalid   
Time: 0:00:00.255037 ts-validation-timecounter-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013930
=>  Loading section .init, size 0x48 lma ffffffff880139b0
=>  Loading section .fini, size 0x30 lma ffffffff880139f8
=>  Loading section .ctors, size 0x8 lma ffffffff88013a28
=>  Loading section .dtors, size 0x8 lma ffffffff88013a30
=>  Loading section .rdata, size 0x1e64 lma ffffffff88013a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880158a8
=>  Loading section .data, size 0x2fc lma ffffffff880158c0
=>  Start address ffffffff88000004
=>  Transfer rate: 712064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[593/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:586 W:0   | mipstx39/jmr3904: ts-validation-tls-0.exe
Result: invalid   
Time: 0:00:00.256415 ts-validation-tls-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880103d0
=>  Loading section .init, size 0x48 lma ffffffff88010450
=>  Loading section .fini, size 0x30 lma ffffffff88010498
=>  Loading section .ctors, size 0x8 lma ffffffff880104c8
=>  Loading section .dtors, size 0x8 lma ffffffff880104d0
=>  Loading section .rdata, size 0x1d70 lma ffffffff880104e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012250
=>  Loading section .tdata, size 0x10 lma ffffffff88012300
=>  Loading section .data, size 0x254 lma ffffffff88012400
=>  Start address ffffffff88000004
=>  Transfer rate: 599584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[594/594] p:1   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:586 W:0   | mipstx39/jmr3904: ts-validation-tls-1.exe
Result: invalid   
Time: 0:00:00.253295 ts-validation-tls-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xa1b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800a1b0
=>  Loading section .init, size 0x48 lma ffffffff8800a230
=>  Loading section .fini, size 0x30 lma ffffffff8800a278
=>  Loading section .ctors, size 0x8 lma ffffffff8800a2a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800a2b0
=>  Loading section .rdata, size 0x1880 lma ffffffff8800a2c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800bb40
=>  Loading section .tdata, size 0x10 lma ffffffff8800bc00
=>  Loading section .data, size 0x20c lma ffffffff8800bd00
=>  Start address ffffffff88000004
=>  Transfer rate: 387936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1

Passed:          1
Failed:          0
User Input:      0
Expected Fail:   0
Indeterminate:   0
Benchmark:       0
Timeout:         0
Test too long:   0
Invalid:       593
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
Wrong Header:    0
------------------
Total:         594
Invalid:
 sptasknopreempt01.exe
 block05.exe
 block15.exe
 sp08.exe
 paranoia.exe
 psxkey09.exe
 whetstone.exe
 psxtmrwlock01.exe
 termios.exe
 fsdosfsname02.exe
 psx13.exe
 spversion01.exe
 spclock_err02.exe
 mrfs_fsrename.exe
 block16.exe
 mimfs_fspermission.exe
 mdosfs_fserror.exe
 sptimer_err02.exe
 termios06.exe
 sp32.exe
 psxglobalcon02.exe
 tar01.exe
 spfatal10.exe
 heapwalk.exe
 psxclock01.exe
 sp71.exe
 psxtmmutex07.exe
 ts-userext.exe
 psxkey10.exe
 ts-validation-timecounter-1.exe
 psxtmcond02.exe
 tm31.exe
 psxcond01.exe
 block13.exe
 tm27.exe
 psxclockrealtime01.exe
 psxautoinit01.exe
 sp47.exe
 mdosfs_fsstatvfs.exe
 jffs2_fstime.exe
 psxtmcond06.exe
 ts-validation-acfg-0.exe
 imfs_fslink.exe
 sp74.exe
 mrfs_fstime.exe
 spcbssched02.exe
 sptimespec01.exe
 sparsedisk01.exe
 tm19.exe
 psxualarm.exe
 psxtmthread01.exe
 tm06.exe
 rbheap01.exe
 spconfig02.exe
 spcontext01.exe
 sp19.exe
 dl07.exe
 psxstrsignal01.exe
 spsem_err02.exe
 spmsgq_err01.exe
 block04.exe
 cdtest.exe
 spglobalcon02.exe
 psxid01.exe
 dumpbuf01.exe
 psxtmclocknanosleep01.exe
 psxfilelock01.exe
 psxtmmqrcvblock01.exe
 termios01.exe
 sp59.exe
 getentropy01.exe
 psxtmbarrier03.exe
 psxtmsem02.exe
 psx15.exe
 complex.exe
 psxstat.exe
 psxitimer.exe
 sptimecounter03.exe
 mimfs_fsscandir01.exe
 imfs_fssymlink.exe
 ttest01.exe
 sp03.exe
 dl01.exe
 spmsgq_err02.exe
 stringto01.exe
 sprmsched02.exe
 devnullfatal01.exe
 mdosfs_fsrdwr.exe
 sp24.exe
 mimfs_fssymlink.exe
 psxsignal08.exe
 pwdgrp01.exe
 psxstack01.exe
 psximfs01.exe
 psxtmmq01.exe
 exit02.exe
 spcache01.exe
 jffs2_fsrdwr.exe
 psxtmsem04.exe
 psxpasswd02.exe
 sprmsched01.exe
 sperror02.exe
 psxrwlock01.exe
 mimfs_fstime.exe
 sptls04.exe
 psxtmthread06.exe
 psxtmkey02.exe
 spconsole01.exe
 sp40.exe
 psxtmcleanup01.exe
 sptask_err02.exe
 psxalarm01.exe
 top.exe
 spcbssched01.exe
 psxconfstr.exe
 mimfs_fslink.exe
 psxtmthread05.exe
 sp20.exe
 psxtmbarrier01.exe
 spcpucounter01.exe
 mouse01.exe
 spsimplesched03.exe
 sp49.exe
 psxthreadname01.exe
 sp75.exe
 psxcancel.exe
 psx10.exe
 spfatal33.exe
 sperror01.exe
 psxtmmutexattr01.exe
 sp77.exe
 psxconcurrency01.exe
 psxtmthread04.exe
 pwdgrp02.exe
 tm25.exe
 psx11.exe
 spedfsched04.exe
 psxtmrwlock07.exe
 fsclose01.exe
 spfatal14.exe
 tm08.exe
 psxtmsem03.exe
 speventsystem01.exe
 psxstack02.exe
 ts-validation-timecounter-0.exe
 fileio.exe
 tmtimer01.exe
 sp27.exe
 psxtmmutex04.exe
 jffs2_fssymlink.exe
 psx03.exe
 psxcancel01.exe
 psxautoinit02.exe
 block03.exe
 rhtaskswitch.exe
 psxtmmutex05.exe
 termios04.exe
 ts-validation-tls-1.exe
 psx02.exe
 psxtmsleep01.exe
 psxclassic01.exe
 spatomic01.exe
 sp07.exe
 tm35.exe
 spfifo01.exe
 termios07.exe
 psxfile02.exe
 mimfs_fsrename.exe
 psxsignal03.exe
 rcxx01.exe
 spprintk.exe
 linpack.exe
 spchain.exe
 sp68.exe
 psxsem01.exe
 psxmutexattr01.exe
 dl04.exe
 sp60.exe
 sp45.exe
 mrfs_fsrdwr.exe
 sp72.exe
 spprivenv01.exe
 sp34.exe
 irqs01.exe
 block17.exe
 spedfsched02.exe
 spstdthreads01.exe
 sha.exe
 ts-validation-one-cpu-0.exe
 psx08.exe
 psxkey02.exe
 fsnofs01.exe
 tm11.exe
 sp55.exe
 termios09.exe
 mrfs_fssymlink.exe
 tm15.exe
 sp15.exe
 ts-validation-one-cpu-1.exe
 spfatal15.exe
 tar02.exe
 sp29.exe
 psxsignal05.exe
 tztest.exe
 psxgetattrnp01.exe
 sptask_err03.exe
 psxtimer01.exe
 psxtmthread03.exe
 psxaio02.exe
 psxspin01.exe
 fsimfsconfig03.exe
 bspcmdline01.exe
 imfs_fspatheval.exe
 tm24.exe
 mathf.exe
 spfreechain01.exe
 jffs2_fspatheval.exe
 spstkalloc03.exe
 psxtime.exe
 fsdosfswrite01.exe
 fsdosfssync01.exe
 tmcontext01.exe
 psxcleanup.exe
 psxtmcond04.exe
 psxkey05.exe
 sp37.exe
 ts-terminate.exe
 capture01.exe
 tm17.exe
 spfifo05.exe
 psxinttypes01.exe
 malloc02.exe
 psxtmsem05.exe
 spclock_err01.exe
 psxtmmutex02.exe
 fsdosfsformat01.exe
 sp23.exe
 psx05.exe
 psxmsgq01.exe
 mrfs_fserror.exe
 ts-performance-no-clock-0.exe
 ts-validation-acfg-1.exe
 spport_err01.exe
 psxtmsem01.exe
 block02.exe
 tm01.exe
 psxchroot01.exe
 sp63.exe
 spprofiling01.exe
 psxtmrwlock05.exe
 uid01.exe
 psxtmcond05.exe
 tmfine01.exe
 mdosfs_fstime.exe
 malloctest.exe
 psxmmap01.exe
 cpuuse.exe
 sp62.exe
 psxdevctl01.exe
 spfatal28.exe
 ticker.exe
 block07.exe
 sp31.exe
 psxmsgq03.exe
 psxmsgq02.exe
 mimfs_fsrdwr.exe
 sp41.exe
 tm36.exe
 spfatal12.exe
 imfs_fstime.exe
 jffs2_fslink.exe
 termios03.exe
 malloc03.exe
 psxsignal02.exe
 sp65.exe
 psxobj01.exe
 psxfile01.exe
 psxeintr_join.exe
 spinternalerror01.exe
 termios08.exe
 mdosfs_fspatheval.exe
 fsimfsconfig01.exe
 spsem03.exe
 spfatal05.exe
 psxtmrwlock03.exe
 tm13.exe
 psxkey06.exe
 sppartition_err01.exe
 jffs2_fspermission.exe
 sp11.exe
 sp17.exe
 dl09.exe
 spedfsched01.exe
 spfatal01.exe
 sp70.exe
 psxfchx01.exe
 sptimecounter01.exe
 fsrofs01.exe
 record01.exe
 psxglobalcon01.exe
 psxtmkey01.exe
 psxtmonce01.exe
 ts-validation-non-smp.exe
 sprbtree01.exe
 spthreadq01.exe
 sppagesize.exe
 spfatal30.exe
 psx04.exe
 fsrfsbitmap01.exe
 psxtmmutex03.exe
 mrfs_fspermission.exe
 tm33.exe
 tmonetoone.exe
 psxtmmqrcvblock02.exe
 sp56.exe
 tm28.exe
 jffs2_fserror.exe
 psx07.exe
 tm07.exe
 fsjffs2gc01.exe
 sp33.exe
 sptask_err01.exe
 sp76.exe
 i2c01.exe
 nsecs.exe
 tm20.exe
 sptls03.exe
 psxtmmutex06.exe
 spconfig01.exe
 psxtmrwlock06.exe
 psx01.exe
 spstkalloc.exe
 sp12.exe
 spheapprot.exe
 spsyslock01.exe
 psxtmnanosleep02.exe
 psxtmclocknanosleep02.exe
 spsimplesched01.exe
 psxrdwrv.exe
 psxtmthread02.exe
 spsignal_err01.exe
 fsimfsgeneric01.exe
 spmkdir.exe
 spwkspace.exe
 mrfs_fslink.exe
 psxgetrusage01.exe
 sp2038.exe
 spsimplesched02.exe
 sp25.exe
 sp35.exe
 sptask_err04.exe
 rhilatency.exe
 psxkey07.exe
 sp43.exe
 dl06.exe
 sp18.exe
 spfatal09.exe
 jffs2_fsscandir01.exe
 tm22.exe
 imfs_fsrdwr.exe
 sp01.exe
 spi01.exe
 psxfatal02.exe
 ts-unit-no-clock-0.exe
 libfdt01.exe
 dl02.exe
 sp26.exe
 psxfenv01.exe
 stackchk.exe
 tm09.exe
 sptimecounter02.exe
 spfatal11.exe
 psx14.exe
 spfifo04.exe
 sp57.exe
 block12.exe
 tm30.exe
 stackchk02.exe
 psxndbm01.exe
 spcpuset01.exe
 tm14.exe
 mrfs_fsfpathconf.exe
 psxtmcond01.exe
 sp13.exe
 iostream.exe
 rtmonuse.exe
 spstkalloc02.exe
 psxfatal01.exe
 psxtmthreadattr01.exe
 sptls01.exe
 psxkey01.exe
 spratemon_err01.exe
 spntp01.exe
 putenvtest.exe
 psxshm02.exe
 psxtmclocknanosleep03.exe
 psxaio01.exe
 ts-fatal-too-large-tls-size.exe
 block09.exe
 psxbarrier01.exe
 spregion_err01.exe
 unlimited.exe
 psxtmcond09.exe
 mdosfs_fsscandir01.exe
 sp21.exe
 psxkey03.exe
 mimfs_fserror.exe
 psxpipe01.exe
 ts-validation-io-kernel.exe
 psxconfig01.exe
 spcbssched03.exe
 sp50.exe
 psxtmcond10.exe
 psxtmbarrierattr01.exe
 deviceio01.exe
 block11.exe
 psxmsgq04.exe
 sp69.exe
 spclock_todhook01.exe
 spfifo02.exe
 spthread01.exe
 sp42.exe
 sp02.exe
 dl10.exe
 spfatal29.exe
 spfatal31.exe
 psxshm01.exe
 sp30.exe
 monitor.exe
 sp14.exe
 tm10.exe
 spmountmgr01.exe
 rhsemshuffle.exe
 ts-validation-1.exe
 psxsignal06.exe
 fsfseeko01.exe
 block10.exe
 termios05.exe
 spsize.exe
 tm03.exe
 rhtaskpreempt.exe
 psxtmbarrier04.exe
 sp52.exe
 sp06.exe
 sptimecounter04.exe
 spthreadlife01.exe
 devfs01.exe
 spsem_err01.exe
 ts-validation-intr.exe
 psxcleanup01.exe
 defaultconfig01.exe
 psxsignal07.exe
 spobjgetnext.exe
 psxftw01.exe
 ts-validation-tls-0.exe
 termios10.exe
 imfs_fspermission.exe
 fsimfsconfig02.exe
 psx06.exe
 tm05.exe
 devfs04.exe
 rhmlatency.exe
 psxtmmutex01.exe
 sptimerserver01.exe
 spedfsched03.exe
 psxcleanup02.exe
 md501.exe
 psx09.exe
 sp46.exe
 sp54.exe
 tar03.exe
 base_sp.exe
 dl03.exe
 rhdeadlockbrk.exe
 spintr_err01.exe
 spmisc01.exe
 spfatal03.exe
 psxenosys.exe
 sp48.exe
 fsdosfsname01.exe
 spmutex01.exe
 psxsignal04.exe
 spevent_err03.exe
 spsysinit01.exe
 block08.exe
 spfatal32.exe
 mimfs_fspatheval.exe
 block14.exe
 stackchk01.exe
 spfifo03.exe
 dhrystone.exe
 mathl.exe
 spassoc01.exe
 math.exe
 psxtimer02.exe
 tm02.exe
 sptls02.exe
 psx16.exe
 spscheduler01.exe
 spwatchdog.exe
 ttest02.exe
 tmck.exe
 spcxx01.exe
 tm21.exe
 shell01.exe
 sp66.exe
 psxkey08.exe
 tm16.exe
 splinkersets01.exe
 sppercpudata01.exe
 psxcond02.exe
 tm34.exe
 sp73.exe
 psxtmcond03.exe
 sp27a.exe
 tm12.exe
 sp04.exe
 spfatal34.exe
 tm18.exe
 sp53.exe
 flashdisk01.exe
 psx12.exe
 psxtmbarrier02.exe
 spsem02.exe
 psxkey04.exe
 sp67.exe
 sp51.exe
 sperror03.exe
 imfs_fsscandir01.exe
 spmrsp01.exe
 psxreaddir.exe
 mrfs_fspatheval.exe
 malloc04.exe
 tm23.exe
 block06.exe
 ts-validation-no-clock-0.exe
 sp22.exe
 exit01.exe
 record02.exe
 utf8proc01.exe
 sp44.exe
 dl08.exe
 sp16.exe
 crypt01.exe
 spqreslib.exe
 psxtmsleep02.exe
 tm32.exe
 spnsext01.exe
 capture.exe
 spsem01.exe
 imfs_fserror.exe
 tm26.exe
 psxonce01.exe
 psxsysconf.exe
 sp58.exe
 sp05.exe
 newlib01.exe
 spglobalcon01.exe
 spinternalerror02.exe
 psxclock.exe
 spextensions01.exe
 sp64.exe
 psxaio03.exe
 psxpasswd01.exe
 psxsignal01.exe
 ofw01.exe
 psxmount.exe
 psxtmcond08.exe
 psxtimes01.exe
 psximfs02.exe
 hello.exe
 termios11.exe
 ts-validation-cache.exe
 mrfs_fsscandir01.exe
 psxtmrwlock02.exe
 spfatal04.exe
 ts-validation-0.exe
 tm29.exe
 psxtmcond07.exe
 psxtmrwlock04.exe
 psxtmnanosleep01.exe
 speventtransient01.exe
 dl05.exe
 block01.exe
 spstkalloc04.exe
 sp38.exe
 termios02.exe
 ts-fatal-init-task-construct-failed.exe
 monitor02.exe
 psxusleep.exe
 sptimer_err01.exe
 fsbdpart01.exe
 tm04.exe
Average test time: 0:00:00.066920
Testing time     : 0:00:39.750936


More information about the build mailing list