Build CYGWIN_NT-10.0-19044: FAILED 6/rtems-mips on x86_64-pc-cygwin (mips-rtems6-gcc-a5a6598-newlib-0b6342c-x86_64-pc-cygwin-1)

OAR Tester rtems-tester at oarcorp.com
Thu Nov 3 19:37:52 UTC 2022


RTEMS Source Builder - Set Builder, 6 (cb8821e93378 modified)

Host: CYGWIN_NT-10.0-19044-3.3.4-341.x86_64-x86_64-64bit-WindowsPE
       CYGWIN_NT-10.0-19044 VM-Windows10 3.3.4-341.x86_64 2022-01-31 19:35 UTC
       x86_64

Build Time: 1:15:19.168243


Output
======

Build Set: 6/rtems-mips
Build Set: tools/rtems-default-tools.bset
Build Set: textproc/gsed-internal.bset
config: textproc/gsed.cfg
Build Set: Time 0:00:00.066967
config: devel/expat-2.4.8-1.cfg
package: expat-2.4.8-x86_64-pc-cygwin-1
building: expat-2.4.8-x86_64-pc-cygwin-1
sizes: expat-2.4.8-x86_64-pc-cygwin-1: 10.041MB (installed: 1.463MB)
cleaning: expat-2.4.8-x86_64-pc-cygwin-1
reporting: devel/expat-2.4.8-1.cfg -> expat-2.4.8-x86_64-pc-cygwin-1.txt
reporting: devel/expat-2.4.8-1.cfg -> expat-2.4.8-x86_64-pc-cygwin-1.xml
config: devel/gmp-6.2.1.cfg
package: gmp-6.2.1-x86_64-pc-cygwin-1
building: gmp-6.2.1-x86_64-pc-cygwin-1
sizes: gmp-6.2.1-x86_64-pc-cygwin-1: 34.137MB (installed: 4.218MB)
cleaning: gmp-6.2.1-x86_64-pc-cygwin-1
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-pc-cygwin-1.txt
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-pc-cygwin-1.xml
config: tools/rtems-gdb-11.2.cfg
package: mips-rtems6-gdb-11.2-x86_64-pc-cygwin-1
building: mips-rtems6-gdb-11.2-x86_64-pc-cygwin-1
sizes: mips-rtems6-gdb-11.2-x86_64-pc-cygwin-1: 836.377MB (installed: 189.090MB)
cleaning: mips-rtems6-gdb-11.2-x86_64-pc-cygwin-1
reporting: tools/rtems-gdb-11.2.cfg -> mips-rtems6-gdb-11.2-x86_64-pc-cygwin-1.txt
reporting: tools/rtems-gdb-11.2.cfg -> mips-rtems6-gdb-11.2-x86_64-pc-cygwin-1.xml
config: tools/rtems-binutils-2.38.cfg
package: mips-rtems6-binutils-2.38-x86_64-pc-cygwin-1
building: mips-rtems6-binutils-2.38-x86_64-pc-cygwin-1
sizes: mips-rtems6-binutils-2.38-x86_64-pc-cygwin-1: 706.154MB (installed: 241.365MB)
cleaning: mips-rtems6-binutils-2.38-x86_64-pc-cygwin-1
reporting: tools/rtems-binutils-2.38.cfg -> mips-rtems6-binutils-2.38-x86_64-pc-cygwin-1.txt
reporting: tools/rtems-binutils-2.38.cfg -> mips-rtems6-binutils-2.38-x86_64-pc-cygwin-1.xml
config: tools/rtems-gcc-12-newlib-head.cfg
package: mips-rtems6-gcc-a5a6598-newlib-0b6342c-x86_64-pc-cygwin-1
building: mips-rtems6-gcc-a5a6598-newlib-0b6342c-x86_64-pc-cygwin-1
error: building mips-rtems6-gcc-a5a6598-newlib-0b6342c-x86_64-pc-cygwin-1
Build FAILED
  See error report: rsb-report-mips-rtems6-gcc-a5a6598-newlib-0b6342c-x86_64-pc-cygwin-1.txt
error: building mips-rtems6-gcc-a5a6598-newlib-0b6342c-x86_64-pc-cygwin-1
config: tools/rtems-tools-6.cfg
package: rtems-tools-40529bc566105be801481880a385a750bed44d36-1
building: rtems-tools-40529bc566105be801481880a385a750bed44d36-1
sizes: rtems-tools-40529bc566105be801481880a385a750bed44d36-1: 249.297MB (installed: 82.534MB)
cleaning: rtems-tools-40529bc566105be801481880a385a750bed44d36-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-40529bc566105be801481880a385a750bed44d36-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-40529bc566105be801481880a385a750bed44d36-1.xml
cleaning: expat-2.4.8-x86_64-pc-cygwin-1
cleaning: gmp-6.2.1-x86_64-pc-cygwin-1
cleaning: mips-rtems6-gdb-11.2-x86_64-pc-cygwin-1
cleaning: mips-rtems6-binutils-2.38-x86_64-pc-cygwin-1
cleaning: rtems-tools-40529bc566105be801481880a385a750bed44d36-1
Build Sizes: usage: 1.323GB total: 1.760GB (sources: 1.253GB, patches: 604.124KB, installed 518.670MB)
Build Set: Time 1:01:07.351256
config: tools/rtems-mipstx39-gdb-head.cfg
package: mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1
download: https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/c6d2040 -> sources/sourceware-mirror-binutils-gdb-c6d2040.tar.gz
building: mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1
sizes: mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1: 1.165GB (installed: 246.191MB)
cleaning: mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1
reporting: tools/rtems-mipstx39-gdb-head.cfg -> mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1.txt
reporting: tools/rtems-mipstx39-gdb-head.cfg -> mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1.xml
staging: mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1 -> /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609-staging
installing: mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1 -> /home/rtems-tester/rtems-cron-6/tools/6
cleaning: mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1
installing: 6/rtems-mips -> /home/rtems-tester/rtems-cron-6/tools/6
clean staging: 6/rtems-mips
Staging Size: 246.201MB
Mailing report: build at rtems.org

Report
======

==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 13:34:22 2022
==============================================================================
Report: devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.4.8-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
Package: expat-2.4.8-x86_64-pc-cygwin-1
 Config: devel/expat-2.4.8-1.cfg
 Summary:
  Expat XML Parser v2.4.8 for target mips-rtems6 on host x86_64-pc-cygwin
 URL:
  http://expat.sourceforge.net/
 Version:
  2.4.8
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_4_8/expat-2.4.8.tar.gz
       sha256: 398f6d95bf808d3108e27547b372cb4ac8dc2298a3c4251eb7aa3d4c6d4bb3e2
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.4.8
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.4.8
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --verbose  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info  --disable-shared
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.4.8
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 13:34:23 2022
==============================================================================
Report: devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.4.8-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
Package: expat-2.4.8-x86_64-pc-cygwin-1
 Config: devel/expat-2.4.8-1.cfg
 Summary:
  Expat XML Parser v2.4.8 for target mips-rtems6 on host x86_64-pc-cygwin
 URL:
  http://expat.sourceforge.net/
 Version:
  2.4.8
 Release:
  1
  Sources: 1
    1: https://github.com/libexpat/libexpat/releases/download/R_2_4_8/expat-2.4.8.tar.gz
       sha256: 398f6d95bf808d3108e27547b372cb4ac8dc2298a3c4251eb7aa3d4c6d4bb3e2
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source expat -q -n expat-2.4.8
  %setup patch expat -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd expat-2.4.8
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --verbose  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info  --disable-shared
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd expat-2.4.8
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 13:37:44 2022
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-pc-cygwin-1
 Config: devel/gmp-6.2.1.cfg
 Summary:
  The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target mips-rtems6 on host x86_64-pc-cygwin
 URL:
  https://gmplib.org/
 Version:
  6.2.1
 Release:
  1
  Sources: 1
    1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
       sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source gmp -q -n gmp-6.2.1
  %setup patch gmp -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd gmp-6.2.1
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --verbose  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info  --disable-shared
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd gmp-6.2.1
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 13:37:45 2022
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-pc-cygwin-1
 Config: devel/gmp-6.2.1.cfg
 Summary:
  The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target mips-rtems6 on host x86_64-pc-cygwin
 URL:
  https://gmplib.org/
 Version:
  6.2.1
 Release:
  1
  Sources: 1
    1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
       sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source gmp -q -n gmp-6.2.1
  %setup patch gmp -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd gmp-6.2.1
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ./configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --verbose  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info  --disable-shared
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd gmp-6.2.1
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 13:49:13 2022
==============================================================================
Report: tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gdb-11.2-x86_64-pc-cygwin-1
 Config: tools/rtems-gdb-11.2.cfg
 Summary:
  GDB v11.2 for target mips-rtems6 on host x86_64-pc-cygwin
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  11.2
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
       sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-11.2"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-pc-cygwin" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --target=mips-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof  --with-system-readline  --without-included-gettext  --disable-win32-registry  --disable-werror  --disable-sim    --without-zlib  --with-expat  --with-guile=no    --with-python=/bin/python3  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
  rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 13:49:16 2022
==============================================================================
Report: tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gdb-11.2-x86_64-pc-cygwin-1
 Config: tools/rtems-gdb-11.2.cfg
 Summary:
  GDB v11.2 for target mips-rtems6 on host x86_64-pc-cygwin
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  11.2
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
       sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-11.2"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-pc-cygwin" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --target=mips-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof  --with-system-readline  --without-included-gettext  --disable-win32-registry  --disable-werror  --disable-sim    --without-zlib  --with-expat  --with-guile=no    --with-python=/bin/python3  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
  rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 13:54:50 2022
==============================================================================
Report: tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.38.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-binutils-2.38-x86_64-pc-cygwin-1
 Config: tools/rtems-binutils-2.38.cfg
 Summary:
  Binutils v2.38 for target mips-rtems6 on host x86_64-pc-cygwin
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.38
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/binutils/binutils-2.38.tar.bz2
       sha512: 7690b4158bd6587a85c6b98903980b9ac6f16b47f7fd1e60986b0a70388bedcfdc05d75597aa49c81fec1609ce24bed6c26583f76fd2471a9d63394fd9798afc
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.38"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-pc-cygwin" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --target=mips-rtems6  --verbose --disable-nls  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim  --enable-deterministic-archives  --enable-64-bit-bfd    --without-included-gettext  --disable-win32-registry  --disable-werror  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  cd ${build_top}
  rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
  rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/locale
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/mips-rtems6-dlltool; then
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/mips-rtems6-nlmconv; then
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/mips-rtems6-windres; then
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/mips-rtems6-windmc; then
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 13:54:50 2022
==============================================================================
Report: tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.38.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-binutils-2.38-x86_64-pc-cygwin-1
 Config: tools/rtems-binutils-2.38.cfg
 Summary:
  Binutils v2.38 for target mips-rtems6 on host x86_64-pc-cygwin
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.38
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/binutils/binutils-2.38.tar.bz2
       sha512: 7690b4158bd6587a85c6b98903980b9ac6f16b47f7fd1e60986b0a70388bedcfdc05d75597aa49c81fec1609ce24bed6c26583f76fd2471a9d63394fd9798afc
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.38"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mips-rtems6" -o "x86_64-pc-cygwin" == "mips-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --target=mips-rtems6  --verbose --disable-nls  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim  --enable-deterministic-archives  --enable-64-bit-bfd    --without-included-gettext  --disable-win32-registry  --disable-werror  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  cd ${build_top}
  rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
  rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/locale
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/mips-rtems6-dlltool; then
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/mips-rtems6-nlmconv; then
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/mips-rtems6-windres; then
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/mips-rtems6-windmc; then
  rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/mips-rtems6-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 14:34:08 2022
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-40529bc566105be801481880a385a750bed44d36-1
 Config: tools/rtems-tools-6.cfg
 Summary:
  RTEMS Tools 40529bc566105be801481880a385a750bed44d36 for host x86_64-pc-cygwin
 URL:
  http://www.rtems.org/
 Version:
  40529bc566105be801481880a385a750bed44d36
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-40529bc566105be801481880a385a750bed44d36.tar.bz2
       sha512: TBBcCps/65zZJMhk+ijyGsTMMul7j18XUaGT3DQWz3f93nOHy25NHCfDgbwxmLGntEgzTm4I4fHe38sXYV8y6g==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-40529bc566105be801481880a385a750bed44d36
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
  RT_HOST="--host=x86_64-pc-cygwin"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/rtems-tester/rtems-cron-6/tools/6
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 14:34:09 2022
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-40529bc566105be801481880a385a750bed44d36-1
 Config: tools/rtems-tools-6.cfg
 Summary:
  RTEMS Tools 40529bc566105be801481880a385a750bed44d36 for host x86_64-pc-cygwin
 URL:
  http://www.rtems.org/
 Version:
  40529bc566105be801481880a385a750bed44d36
 Release:
  1
  Sources: 1
    1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-40529bc566105be801481880a385a750bed44d36.tar.bz2
       sha512: TBBcCps/65zZJMhk+ijyGsTMMul7j18XUaGT3DQWz3f93nOHy25NHCfDgbwxmLGntEgzTm4I4fHe38sXYV8y6g==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-40529bc566105be801481880a385a750bed44d36
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
  RT_HOST="--host=x86_64-pc-cygwin"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/rtems-tester/rtems-cron-6/tools/6
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}


==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 14:48:14 2022
==============================================================================
Report: tools/rtems-mipstx39-gdb-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-mipstx39-gdb-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-mipstx39-gdb-head.cfg
------------------------------------------------------------------------------
Package: mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1
 Config: tools/rtems-mipstx39-gdb-head.cfg
 Summary:
  GDB vc6d2040 for target mipstx39-rtems6 on host x86_64-pc-cygwin
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  c6d2040
 Release:
  1
  Sources: 1
    1: --rsb-file=sourceware-mirror-binutils-gdb-c6d2040.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/c6d2040
       No checksum
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source=sourceware-mirror-binutils-gdb-c6d2040
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mipstx39-rtems6" -o "x86_64-pc-cygwin" == "mipstx39-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --target=mipstx39-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof  --with-system-readline  --without-included-gettext  --disable-win32-registry  --disable-werror  --disable-sim    --without-zlib  --with-expat  --with-guile=no    --with-python=/bin/python3  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
  rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Nov  3 14:48:17 2022
==============================================================================
Report: tools/rtems-mipstx39-gdb-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: cb8821e93378118e78a9cb25859789b126bd5761
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-mipstx39-gdb-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-mipstx39-gdb-head.cfg
------------------------------------------------------------------------------
Package: mipstx39-rtems6-gdb-c6d2040-x86_64-pc-cygwin-1
 Config: tools/rtems-mipstx39-gdb-head.cfg
 Summary:
  GDB vc6d2040 for target mipstx39-rtems6 on host x86_64-pc-cygwin
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  c6d2040
 Release:
  1
  Sources: 1
    1: --rsb-file=sourceware-mirror-binutils-gdb-c6d2040.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/c6d2040
       No checksum
  Patches: 0
 Preparation:
  build_top=$(pwd)
  gdb_source=sourceware-mirror-binutils-gdb-c6d2040
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "mipstx39-rtems6" -o "x86_64-pc-cygwin" == "mipstx39-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin  --target=mipstx39-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof  --with-system-readline  --without-included-gettext  --disable-win32-registry  --disable-werror  --disable-sim    --without-zlib  --with-expat  --with-guile=no    --with-python=/bin/python3  --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
  rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}


More information about the build mailing list