[rtems-test] mipstx39/jmr3904: : Passed:4 Failed:0 Timeout:0 Test-Too-long:0 Invalid:1851 Wrong:0

[OAR Tester]

Testing time     : 0:02:04.823209
Average test time: 0:00:00.067290

Host
====
Linux-4.18.0-358.el8.x86_64-x86_64-with-centos-8 (Linux VM-CentOSStream8.rtems.com 4.18.0-358.el8.x86_64 #1 SMP Mon Jan 10 13:11:20 UTC 2022 x86_64 x86_64)

Configuration
=============
Version: Not present in test
Build  : Not present in test
Tools  : Not present in test

Summary
=======

Passed:           4
Failed:           0
User Input:       0
Expected Fail:    0
Indeterminate:    0
Benchmark:        0
Timeout:          0
Test too long:    0
Invalid:       1851
Wrong Version:    0
Wrong Build:      0
Wrong Tools:      0
Wrong Header:     0
-------------------
Total:         1855

Invalid:
 block07.exe
 rbheap01.exe
 spfatal33.exe
 psxshm02.exe
 psxkey03.exe
 sp18.exe
 psxtmrwlock01.exe
 psxtmrwlock03.exe
 psxfilelock01.exe
 spclock_err01.exe
 sp29.exe
 psxsignal03.exe
 psx09.exe
 psxglobalcon02.exe
 tar01.exe
 psxeintr_join.exe
 psxclock01.exe
 spedfsched04.exe
 defaultconfig01.exe
 spedfsched01.exe
 spmisc01.exe
 dl07.exe
 psxaio02.exe
 md501.exe
 tm29.exe
 spclock_todhook01.exe
 spsyslock01.exe
 block13.exe
 spglobalcon02.exe
 psxreaddir.exe
 spfatal28.exe
 psxclockrealtime01.exe
 spfatal04.exe
 fsdosfsname02.exe
 spintrcritical04.exe
 mdosfs_fsstatvfs.exe
 mimfs_fslink.exe
 psxtmcond06.exe
 spstdc17.exe
 tar03.exe
 imfs_fslink.exe
 spwatchdog.exe
 libfdt01.exe
 psxualarm.exe
 mathf.exe
 tar03.exe
 imfs_fspermission.exe
 sp67.exe
 spconfig02.exe
 tm18.exe
 psxtmrwlock05.exe
 sp30.exe
 spstdthreads01.exe
 spfatal01.exe
 psxstrsignal01.exe
 psxtmrwlock04.exe
 block04.exe
 stackchk01.exe
 spstdc17.exe
 psxid01.exe
 dumpbuf01.exe
 sp08.exe
 psxtmthread01.exe
 psxkey10.exe
 dl05.exe
 getentropy01.exe
 cdtest.exe
 spintrcritical12.exe
 spport_err01.exe
 spintrcritical13.exe
 sptimecounter01.exe
 psx15.exe
 jffs2_fslink.exe
 dl07.exe
 spi01.exe
 rtmonuse.exe
 tm16.exe
 sp03.exe
 psxtmcleanup01.exe
 tmfine01.exe
 sprmsched02.exe
 devnullfatal01.exe
 mdosfs_fsrdwr.exe
 psxconfig01.exe
 psxsignal08.exe
 pwdgrp01.exe
 math.exe
 exit02.exe
 psxtmsem04.exe
 capture01.exe
 sperror02.exe
 termios01.exe
 paranoia.exe
 psxtmrwlock01.exe
 sptls04.exe
 spwkspace.exe
 psxtmkey02.exe
 tm13.exe
 sp35.exe
 top.exe
 spfatal30.exe
 speventtransient01.exe
 spfifo02.exe
 mouse01.exe
 sp75.exe
 psxtmmutexattr01.exe
 tm35.exe
 rcxx01.exe
 fsclose01.exe
 imfs_fserror.exe
 fsrfsbitmap01.exe
 psxtmsem03.exe
 termios07.exe
 psxtmmutex01.exe
 sp47.exe
 block05.exe
 whetstone.exe
 jffs2_fssymlink.exe
 psxualarm.exe
 cpuuse.exe
 psxtmmutex05.exe
 termios04.exe
 psx02.exe
 psx05.exe
 sptask_err02.exe
 ofw01.exe
 uid01.exe
 psxclock.exe
 spregion_err01.exe
 termios07.exe
 psxfile02.exe
 spfatal03.exe
 tm14.exe
 psxtmrwlock05.exe
 sp27a.exe
 psxgetattrnp01.exe
 linpack.exe
 sp68.exe
 dl04.exe
 psx16.exe
 spintrcritical10.exe
 paranoia.exe
 psxtmmutex02.exe
 sp72.exe
 tm30.exe
 irqs01.exe
 irqs01.exe
 spsimplesched02.exe
 block17.exe
 psxftw01.exe
 psxtmsleep01.exe
 tm04.exe
 psxtmrwlock06.exe
 psxautoinit01.exe
 mathl.exe
 uid01.exe
 fsnofs01.exe
 tm11.exe
 sp55.exe
 tmonetoone.exe
 spmkdir.exe
 sp15.exe
 sp50.exe
 sppercpudata01.exe
 spintrcritical05.exe
 spfatal04.exe
 sp22.exe
 spsem01.exe
 psxgetattrnp01.exe
 sptask_err03.exe
 block01.exe
 dhrystone.exe
 psxaio02.exe
 sp32.exe
 termios06.exe
 fsbdpart01.exe
 tm30.exe
 exit02.exe
 tm24.exe
 mathf.exe
 spfreechain01.exe
 sp21.exe
 psxtmmutex06.exe
 sppagesize.exe
 tm27.exe
 sperror02.exe
 termios08.exe
 sp32.exe
 tm13.exe
 sp77.exe
 jffs2_fspatheval.exe
 ts-terminate.exe
 spintrcritical15.exe
 psxinttypes01.exe
 sp58.exe
 psxid01.exe
 sp73.exe
 sp34.exe
 block02.exe
 spwkspace.exe
 ts-validation-timecounter-0.exe
 psxcancel.exe
 mdosfs_fstime.exe
 sprmsched02.exe
 psxmmap01.exe
 termios11.exe
 block14.exe
 termios08.exe
 sparsedisk01.exe
 fsimfsconfig01.exe
 spqreslib.exe
 tm29.exe
 tm09.exe
 psximfs01.exe
 imfs_fsrdwr.exe
 psxsignal02.exe
 mrfs_fsrdwr.exe
 imfs_fstime.exe
 psxchroot01.exe
 deviceio01.exe
 spnsext01.exe
 tm14.exe
 mdosfs_fspatheval.exe
 fileio.exe
 psxcond01.exe
 psxrdwrv.exe
 sp12.exe
 psxcleanup.exe
 sppartition_err01.exe
 dl09.exe
 fsdosfssync01.exe
 psxtmcond01.exe
 tm16.exe
 spfatal01.exe
 sp70.exe
 tm32.exe
 termios05.exe
 spheapprot.exe
 ts-validation-0.exe
 sp25.exe
 sp50.exe
 psxtmonce01.exe
 dl01.exe
 sptimerserver01.exe
 spthreadq01.exe
 spfatal30.exe
 psxitimer.exe
 ts-validation-tls-1.exe
 sptasknopreempt01.exe
 fsrfsbitmap01.exe
 getentropy01.exe
 stackchk.exe
 sp27a.exe
 tm26.exe
 sp20.exe
 mrfs_fspermission.exe
 tmonetoone.exe
 spedfsched04.exe
 tm34.exe
 psxcleanup.exe
 psxclock01.exe
 spcbssched01.exe
 sp76.exe
 i2c01.exe
 i2c01.exe
 nsecs.exe
 psxtmmutex06.exe
 spconfig01.exe
 devfs01.exe
 mimfs_fsrename.exe
 spintrcritical16.exe
 fsjffs2gc01.exe
 psxtmkey01.exe
 sp35.exe
 sp62.exe
 ts-validation-acfg-1.exe
 spwkspace.exe
 utf8proc01.exe
 spwatchdog.exe
 libfdt01.exe
 spintrcritical14.exe
 sprmsched01.exe
 sp18.exe
 psx04.exe
 splinkersets01.exe
 jffs2_fsscandir01.exe
 spfatal09.exe
 psxtmnanosleep01.exe
 psxtmcond10.exe
 rbheap01.exe
 ts-unit-no-clock-0.exe
 spfatal12.exe
 libfdt01.exe
 sp70.exe
 sp26.exe
 mimfs_fsrename.exe
 tm09.exe
 spnsext01.exe
 sha.exe
 flashdisk01.exe
 dl04.exe
 sp64.exe
 tm14.exe
 psxtmcond01.exe
 tm01.exe
 i2c01.exe
 termios.exe
 spfatal28.exe
 spstkalloc02.exe
 psxfilelock01.exe
 sptls01.exe
 psxtmonce01.exe
 mdosfs_fsstatvfs.exe
 record02.exe
 spratemon_err01.exe
 psxshm02.exe
 spintrcritical02.exe
 ts-fatal-too-large-tls-size.exe
 imfs_fspermission.exe
 psxbarrier01.exe
 spregion_err01.exe
 psxtmcond09.exe
 sp21.exe
 ts-validation-io-kernel.exe
 ticker.exe
 spcbssched03.exe
 sperror01.exe
 psxmsgq04.exe
 mimfs_fstime.exe
 spfifo02.exe
 sp66.exe
 psxspin01.exe
 sp42.exe
 mimfs_fssymlink.exe
 spfatal29.exe
 psxtmonce01.exe
 tztest.exe
 block04.exe
 psx16.exe
 psxtmmqrcvblock02.exe
 spobjgetnext.exe
 monitor.exe
 psxtmcond06.exe
 psxspin01.exe
 spmountmgr01.exe
 sp71.exe
 psxsignal05.exe
 ts-validation-0.exe
 block10.exe
 devnullfatal01.exe
 block10.exe
 sptasknopreempt01.exe
 psxkey05.exe
 psxshm01.exe
 tm03.exe
 psxtmbarrier03.exe
 rhtaskpreempt.exe
 tm15.exe
 spfatal26.exe
 spfatal14.exe
 sp06.exe
 rhtaskswitch.exe
 tm05.exe
 spthreadq01.exe
 psxtmmutex06.exe
 psxbarrier01.exe
 psxcond01.exe
 sptask_err04.exe
 crypt01.exe
 psxcleanup01.exe
 tm03.exe
 psxclockrealtime01.exe
 ts-validation-tls-0.exe
 termios10.exe
 spfatal09.exe
 spcbssched01.exe
 termios05.exe
 psxsignal03.exe
 psxclock01.exe
 sptimerserver01.exe
 sppagesize.exe
 psxpipe01.exe
 spstdc17.exe
 psxtmbarrier03.exe
 psxkey10.exe
 imfs_fslink.exe
 tar03.exe
 rhdeadlockbrk.exe
 psxsignal06.exe
 spintrcritical08.exe
 mouse01.exe
 psx01.exe
 fsdosfsname01.exe
 sp33.exe
 spchain.exe
 psxsignal04.exe
 spevent_err03.exe
 spsysinit01.exe
 psxaio01.exe
 fsdosfsformat01.exe
 block14.exe
 spclock_err01.exe
 spwatchdog.exe
 spfatal32.exe
 dhrystone.exe
 sptasknopreempt01.exe
 block09.exe
 psx16.exe
 psxusleep.exe
 spscheduler01.exe
 spmsgq_err02.exe
 sp56.exe
 spmsgq_err01.exe
 spedfsched01.exe
 psxtmbarrier04.exe
 psxstat.exe
 ttest01.exe
 spsignal_err01.exe
 tm18.exe
 psxtmbarrier02.exe
 block01.exe
 imfs_fsscandir01.exe
 malloctest.exe
 psxreaddir.exe
 rtmonuse.exe
 mrfs_fspatheval.exe
 sp65.exe
 sp07.exe
 spfatal10.exe
 sp69.exe
 spedfsched03.exe
 utf8proc01.exe
 termios02.exe
 termios10.exe
 spsem01.exe
 psxtmsem04.exe
 psxkey08.exe
 tm06.exe
 mdosfs_fsrdwr.exe
 spglobalcon01.exe
 sp64.exe
 spassoc01.exe
 psx12.exe
 spmrsp01.exe
 spcbssched03.exe
 jffs2_fstime.exe
 ts-validation-cache.exe
 fsimfsgeneric01.exe
 spclock_err02.exe
 mimfs_fsscandir01.exe
 spfatal04.exe
 tm29.exe
 psxcleanup02.exe
 psxtmkey02.exe
 stackchk01.exe
 newlib01.exe
 spmutex01.exe
 mrfs_fsfpathconf.exe
 mimfs_fssymlink.exe
 psxclock.exe
 block01.exe
 psxtmcond10.exe
 rhilatency.exe
 psxtmsem04.exe
 spcxx01.exe
 sp43.exe
 termios02.exe
 psxusleep.exe
 monitor.exe
 psxtmsem03.exe
 psxkey08.exe
 spglobalcon02.exe
 exit02.exe
 psxclassic01.exe
 block05.exe
 ts-validation-one-cpu-0.exe
 psxtmbarrierattr01.exe
 psxtmmutex03.exe
 termios06.exe
 sptimerserver01.exe
 fsdosfsname02.exe
 psx13.exe
 spversion01.exe
 mimfs_fspermission.exe
 block17.exe
 spintrcritical08.exe
 malloc02.exe
 termios06.exe
 spsimplesched01.exe
 sp55.exe
 psxinttypes01.exe
 spmkdir.exe
 psxkey06.exe
 psxmsgq02.exe
 psx04.exe
 tftpfs.exe
 sha.exe
 mouse01.exe
 spfatal34.exe
 spfatal33.exe
 spintr_err01.exe
 psxfile01.exe
 psxtime.exe
 ts-validation-acfg-0.exe
 psxmsgq02.exe
 pwdgrp01.exe
 sparsedisk01.exe
 sppps01.exe
 rhmlatency.exe
 sptls03.exe
 tm06.exe
 psxsysconf.exe
 psxconfstr.exe
 spcxx01.exe
 rhtaskpreempt.exe
 psxtmsleep01.exe
 psxconcurrency01.exe
 sp75.exe
 psxpasswd02.exe
 tm22.exe
 sp03.exe
 termios01.exe
 block12.exe
 ts-unit-no-clock-0.exe
 sp11.exe
 psxtmsem02.exe
 spratemon_err01.exe
 ts-validation-cache.exe
 tm21.exe
 psxstat.exe
 sptimecounter03.exe
 psxtmthread03.exe
 psxeintr_join.exe
 mimfs_fsscandir01.exe
 spintrcritical20.exe
 psxtmmutex07.exe
 sp24.exe
 psxtmmq01.exe
 spcache01.exe
 jffs2_fsrdwr.exe
 psxrwlock01.exe
 mimfs_fstime.exe
 spintrcritical20.exe
 dhrystone.exe
 psxdevctl01.exe
 psx04.exe
 psxalarm01.exe
 spscheduler01.exe
 dl08.exe
 termios.exe
 mimfs_fslink.exe
 sp04.exe
 psxtmnanosleep02.exe
 spcpucounter01.exe
 psxintrcritical01.exe
 spsimplesched03.exe
 spconsole01.exe
 sp27.exe
 spfifo05.exe
 psxcancel.exe
 imfs_fssymlink.exe
 psxtmthread04.exe
 spglobalcon01.exe
 tmtimer01.exe
 psxtmrwlock07.exe
 capture01.exe
 spmutex01.exe
 sp43.exe
 spchain.exe
 psxtmmutex04.exe
 psx03.exe
 mimfs_fstime.exe
 psxcancel01.exe
 ts-validation-tls-1.exe
 psxclassic01.exe
 spatomic01.exe
 tm35.exe
 mrfs_fspermission.exe
 spfifo03.exe
 spfifo01.exe
 spintrcritical10.exe
 spstkalloc03.exe
 sp63.exe
 ts-performance-no-clock-0.exe
 psxtmthread06.exe
 mrfs_fsrename.exe
 rcxx01.exe
 block09.exe
 psxsem01.exe
 spcache01.exe
 psxgetrusage01.exe
 spthread01.exe
 sp23.exe
 block15.exe
 spedfsched02.exe
 spstdthreads01.exe
 spmsgq_err01.exe
 md501.exe
 psxkey02.exe
 psxtmcleanup01.exe
 sp12.exe
 mrfs_fssymlink.exe
 spfatal29.exe
 sp15.exe
 monitor.exe
 speventsystem01.exe
 mdosfs_fspatheval.exe
 spfatal15.exe
 spunlimited01.exe
 sp52.exe
 tztest.exe
 tm08.exe
 psx12.exe
 psxtmcond08.exe
 fsimfsconfig03.exe
 psx09.exe
 imfs_fspatheval.exe
 spintrcritical05.exe
 cdtest.exe
 jffs2_fspatheval.exe
 psxtmbarrier01.exe
 tm02.exe
 sp67.exe
 sp37.exe
 spcpuset01.exe
 sptimecounter04.exe
 mrfs_fslink.exe
 ts-validation-timecounter-1.exe
 spsize.exe
 fsdosfssync01.exe
 cpuuse.exe
 psxclockrealtime01.exe
 psxtmcond04.exe
 psxtmmutex05.exe
 spstkalloc04.exe
 stringto01.exe
 psxautoinit02.exe
 psx15.exe
 spclock_err01.exe
 psxtmmutex02.exe
 spsem_err02.exe
 sp23.exe
 psxtimer_face01.exe
 psxtmmutex01.exe
 tm11.exe
 tm33.exe
 psxmutexattr01.exe
 dl03.exe
 spfreechain01.exe
 psxtmrwlock05.exe
 malloc02.exe
 tmfine01.exe
 sp17.exe
 spintrcritical18.exe
 malloctest.exe
 spthreadlife01.exe
 ticker.exe
 sptls03.exe
 block07.exe
 spthreadq01.exe
 sppps01.exe
 jffs2_fspermission.exe
 spstkalloc02.exe
 dl03.exe
 sp06.exe
 fsrfsbitmap01.exe
 psxcancel01.exe
 psxtmclocknanosleep03.exe
 psxmsgq02.exe
 sp48.exe
 tm36.exe
 spfatal12.exe
 psx08.exe
 tm23.exe
 psxtmthread02.exe
 psxkey02.exe
 sp46.exe
 spthreadlife01.exe
 psxtmcond08.exe
 sperror01.exe
 spintrcritical04.exe
 psxeintr_join.exe
 psxtmmutex04.exe
 termios08.exe
 spintrcritical14.exe
 newlib01.exe
 psxenosys.exe
 psxtmrwlock07.exe
 spsem03.exe
 psxtmrwlock03.exe
 tm13.exe
 ts-validation-non-smp.exe
 psxcleanup02.exe
 mdosfs_fsstatvfs.exe
 jffs2_fspermission.exe
 sp11.exe
 sp17.exe
 psxfile02.exe
 spintrcritical02.exe
 block06.exe
 fsrofs01.exe
 imfs_fsscandir01.exe
 deviceio01.exe
 tm10.exe
 rhmlatency.exe
 psxtmkey01.exe
 psxrwlock01.exe
 fsbdpart01.exe
 psxtmsleep02.exe
 spatomic01.exe
 sp23.exe
 tm11.exe
 sp62.exe
 tm33.exe
 block03.exe
 sp14.exe
 psxtmmqrcvblock02.exe
 complex.exe
 psxualarm.exe
 sp46.exe
 sp02.exe
 sp33.exe
 spintrcritical13.exe
 sptls03.exe
 tm22.exe
 psxglobalcon01.exe
 spintrcritical22.exe
 sp12.exe
 spsyslock01.exe
 psxtmnanosleep02.exe
 psxconfstr.exe
 spcontext01.exe
 psx10.exe
 psxrdwrv.exe
 psx02.exe
 psxtmthread02.exe
 psxkey07.exe
 speventtransient01.exe
 psxtmmq01.exe
 mrfs_fslink.exe
 sp71.exe
 sp72.exe
 tmcontext01.exe
 ttest02.exe
 fsdosfswrite01.exe
 imfs_fsrdwr.exe
 sp58.exe
 spfatal05.exe
 dl06.exe
 psx10.exe
 fsdosfswrite01.exe
 dl02.exe
 rcxx01.exe
 spsimplesched02.exe
 psxkey01.exe
 sp75.exe
 spfatal11.exe
 psx14.exe
 psxtmmqrcvblock02.exe
 sp57.exe
 psxndbm01.exe
 spfatal34.exe
 sptimer_err02.exe
 psxtmcond06.exe
 spmisc01.exe
 spsem03.exe
 fsimfsconfig03.exe
 sp31.exe
 bspcmdline01.exe
 sperror03.exe
 tm32.exe
 base_sp.exe
 sha.exe
 sp56.exe
 sp01.exe
 psxcond02.exe
 psxfatal01.exe
 tm26.exe
 psxmsgq04.exe
 tm19.exe
 psxtmkey01.exe
 spsize.exe
 sp40.exe
 fsdosfsname01.exe
 psxtmclocknanosleep03.exe
 psxtmbarrier04.exe
 sptask_err04.exe
 sptimespec01.exe
 unlimited.exe
 psxtmsem01.exe
 mimfs_fserror.exe
 psxreaddir.exe
 psxsignal07.exe
 sptimespec01.exe
 sptask_err03.exe
 psxtmbarrierattr01.exe
 dl01.exe
 psxkey04.exe
 tm34.exe
 tm26.exe
 mdosfs_fspatheval.exe
 dl10.exe
 psx06.exe
 psxmsgq01.exe
 mrfs_fspatheval.exe
 psxkey04.exe
 psxsignal06.exe
 mimfs_fspatheval.exe
 termios11.exe
 termios05.exe
 sp53.exe
 sptask_err03.exe
 sp52.exe
 spmountmgr01.exe
 ts-validation-tls-0.exe
 spintrcritical23.exe
 spthreadlife01.exe
 psxtmcond03.exe
 mimfs_fspatheval.exe
 psxstack01.exe
 sptls04.exe
 psxaio02.exe
 sp26.exe
 spintr_err01.exe
 psxaio01.exe
 psxsignal08.exe
 psx06.exe
 psxtmmutex03.exe
 devfs04.exe
 ts-terminate.exe
 psxtmmutex01.exe
 tm31.exe
 spevent_err03.exe
 block17.exe
 ts-userext.exe
 tm05.exe
 ts-fatal-too-large-tls-size.exe
 sp54.exe
 psxtmmq01.exe
 mdosfs_fstime.exe
 psxtimer01.exe
 psxtmcond05.exe
 psxsignal02.exe
 ts-validation-one-cpu-1.exe
 block08.exe
 spfatal32.exe
 capture.exe
 mimfs_fspatheval.exe
 devfs04.exe
 sparsedisk01.exe
 paranoia.exe
 hello.exe
 ts-validation-no-clock-0.exe
 psxtmclocknanosleep02.exe
 stackchk02.exe
 sperror03.exe
 tmck.exe
 tm16.exe
 sp66.exe
 psxtimes01.exe
 fsnofs01.exe
 spclock_todhook01.exe
 tm24.exe
 psxpasswd01.exe
 dl09.exe
 spcpucounter01.exe
 psxtmnanosleep02.exe
 jffs2_fserror.exe
 spfifo05.exe
 sp27a.exe
 psxtmcond04.exe
 sp04.exe
 spfatal34.exe
 ts-validation-one-cpu-0.exe
 mimfs_fspermission.exe
 psxmutexattr01.exe
 sp51.exe
 sperror03.exe
 tm12.exe
 psx07.exe
 tm20.exe
 spsem02.exe
 tm25.exe
 sp37.exe
 psxtmmutexattr01.exe
 psxsignal08.exe
 sp19.exe
 speventsystem01.exe
 psxtmthread05.exe
 sp44.exe
 spsimplesched01.exe
 sp54.exe
 sp48.exe
 spintrcritical12.exe
 sp51.exe
 tar02.exe
 ts-validation-intr.exe
 psxsysconf.exe
 ts-validation-io-kernel.exe
 psx01.exe
 spinternalerror02.exe
 psxaio03.exe
 sp55.exe
 psxpasswd01.exe
 ofw01.exe
 dl06.exe
 fsdosfsformat01.exe
 psxdevctl01.exe
 spintrcritical01.exe
 psxglobalcon01.exe
 ts-validation-tls-0.exe
 spfatal26.exe
 ts-validation-0.exe
 psxtmcond07.exe
 sp13.exe
 speventtransient01.exe
 rhdeadlockbrk.exe
 iostream.exe
 psxtmthread06.exe
 spstkalloc04.exe
 iostream.exe
 tm27.exe
 sptimer_err01.exe
 sp34.exe
 tm04.exe
 sptimer_err02.exe
 ts-validation-no-clock-0.exe
 psxkey09.exe
 whetstone.exe
 spversion01.exe
 termios.exe
 spclock_err02.exe
 psxaio03.exe
 block16.exe
 mdosfs_fserror.exe
 spregion_err01.exe
 sp40.exe
 psxtmcond03.exe
 psxconfig01.exe
 heapwalk.exe
 mrfs_fsrename.exe
 sp27.exe
 psxkey10.exe
 cpuuse.exe
 mdosfs_fsscandir01.exe
 spstkalloc04.exe
 psxautoinit01.exe
 ts-fatal-too-large-tls-size.exe
 psxtmcond02.exe
 psxalarm01.exe
 fileio.exe
 psxtmsem05.exe
 devnullfatal01.exe
 tar01.exe
 sperror02.exe
 spcbssched02.exe
 psxtmthread01.exe
 ts-validation-non-smp.exe
 sprbtree01.exe
 block03.exe
 sp01.exe
 spfatal31.exe
 psx15.exe
 tm12.exe
 imfs_fsrdwr.exe
 dl07.exe
 spmsgq_err01.exe
 block13.exe
 spconsole01.exe
 spntp01.exe
 psxtmmqrcvblock01.exe
 sp65.exe
 exit01.exe
 sp24.exe
 tmcontext01.exe
 tm10.exe
 psxinttypes01.exe
 sptimer_err01.exe
 psxitimer.exe
 imfs_fssymlink.exe
 ttest01.exe
 ttest02.exe
 spmsgq_err02.exe
 stringto01.exe
 tm34.exe
 sp08.exe
 spfifo01.exe
 psxtmthread02.exe
 spsem_err01.exe
 top.exe
 ts-validation-timecounter-0.exe
 rhtaskpreempt.exe
 splinkersets01.exe
 psxtmthread06.exe
 sp33.exe
 pwdgrp02.exe
 sptimecounter03.exe
 psxtmcleanup01.exe
 sptask_err02.exe
 mrfs_fserror.exe
 sp31.exe
 fsclose01.exe
 sp45.exe
 sp16.exe
 psxtmthread05.exe
 spunlimited01.exe
 psxtmbarrier01.exe
 psxclassic01.exe
 spintrcritical23.exe
 psxthreadname01.exe
 psxenosys.exe
 block04.exe
 md501.exe
 fsdosfssync01.exe
 iostream.exe
 spfatal14.exe
 termios04.exe
 psxconcurrency01.exe
 tm25.exe
 utf8proc01.exe
 psx11.exe
 block14.exe
 sp69.exe
 speventsystem01.exe
 psxtimer01.exe
 psxtmbarrier02.exe
 ts-validation-timecounter-0.exe
 psxstack01.exe
 psxtmsem03.exe
 fsdosfsformat01.exe
 bspcmdline01.exe
 psxtmcond05.exe
 tm07.exe
 getentropy01.exe
 block03.exe
 psxsem01.exe
 rhtaskswitch.exe
 mathf.exe
 psxtmsleep01.exe
 fsimfsconfig01.exe
 sptimecounter04.exe
 cdtest.exe
 sp07.exe
 psxstrsignal01.exe
 tm23.exe
 psxfchx01.exe
 sp54.exe
 tm17.exe
 psxsignal03.exe
 hello.exe
 termios10.exe
 tm19.exe
 spclock_err02.exe
 block10.exe
 spextensions01.exe
 psxkey01.exe
 psxtmsem01.exe
 sprmsched01.exe
 spstkalloc.exe
 sptask_err04.exe
 psx08.exe
 spcbssched01.exe
 sp04.exe
 sp77.exe
 psxstack02.exe
 tm15.exe
 tm28.exe
 ts-validation-1.exe
 jffs2_fsscandir01.exe
 psxrdwrv.exe
 spfatal11.exe
 psxsignal05.exe
 record01.exe
 fsimfsconfig03.exe
 psxtimer_face01.exe
 hello.exe
 psxspin01.exe
 ticker.exe
 psxkey03.exe
 spprintk.exe
 nsecs.exe
 spport_err01.exe
 spassoc01.exe
 spfatal31.exe
 fsdosfswrite01.exe
 mrfs_fssymlink.exe
 sp57.exe
 spfatal33.exe
 tztest.exe
 psxkey05.exe
 spstdthreads01.exe
 psxtmsem05.exe
 psxtmnanosleep01.exe
 spfatal14.exe
 spconfig02.exe
 spedfsched04.exe
 pwdgrp02.exe
 psxtmcond05.exe
 ts-performance-no-clock-0.exe
 jffs2_fslink.exe
 spport_err01.exe
 psxthreadname01.exe
 psxsignal01.exe
 psxfchx01.exe
 tm01.exe
 sp63.exe
 spprofiling01.exe
 uid01.exe
 record01.exe
 spintrcritical11.exe
 jffs2_fssymlink.exe
 ts-validation-acfg-1.exe
 psxdevctl01.exe
 psxmsgq03.exe
 spfifo03.exe
 base_sp.exe
 sp31.exe
 ttest02.exe
 heapwalk.exe
 psxmsgq03.exe
 spfatal11.exe
 psxrwlock01.exe
 spatomic01.exe
 tm20.exe
 spcbssched02.exe
 sptask_err01.exe
 jffs2_fslink.exe
 termios03.exe
 mrfs_fsfpathconf.exe
 imfs_fspermission.exe
 psxtmrwlock04.exe
 spextensions01.exe
 termios11.exe
 psxfile01.exe
 tmfine01.exe
 sp2038.exe
 spfatal05.exe
 psxcleanup02.exe
 spprofiling01.exe
 psxtmclocknanosleep01.exe
 whetstone.exe
 tm07.exe
 fsnofs01.exe
 fsdosfsname02.exe
 linpack.exe
 psxfatal02.exe
 exit03.exe
 sppagesize.exe
 devfs01.exe
 sp59.exe
 psxsem01.exe
 sp56.exe
 sp74.exe
 imfs_fstime.exe
 sp40.exe
 tm07.exe
 sptimecounter04.exe
 sp02.exe
 psxstack02.exe
 base_sp.exe
 spconfig01.exe
 tm22.exe
 psxmsgq03.exe
 psxaio03.exe
 spstkalloc.exe
 sp25.exe
 sp44.exe
 spscheduler01.exe
 mimfs_fslink.exe
 termios02.exe
 malloc04.exe
 psxcleanup01.exe
 spmkdir.exe
 psxtmthreadattr01.exe
 psxgetrusage01.exe
 sptls01.exe
 sp2038.exe
 sp25.exe
 sp35.exe
 psxobj01.exe
 linpack.exe
 rhilatency.exe
 sp43.exe
 imfs_fspatheval.exe
 sppartition_err01.exe
 spobjgetnext.exe
 psxonce01.exe
 psx05.exe
 spsimplesched03.exe
 psximfs02.exe
 psxfatal02.exe
 psxsignal05.exe
 spcxx01.exe
 psxglobalcon02.exe
 sp74.exe
 tm31.exe
 tm23.exe
 psxtmmutex07.exe
 tm35.exe
 sptimecounter02.exe
 psxconcurrency01.exe
 tm01.exe
 stackchk02.exe
 unlimited.exe
 mrfs_fstime.exe
 spmountmgr01.exe
 dl04.exe
 imfs_fspatheval.exe
 psxgetrusage01.exe
 psxshm02.exe
 sp65.exe
 sp13.exe
 iostream.exe
 spinternalerror01.exe
 jffs2_fsrdwr.exe
 spconsole01.exe
 psxobj01.exe
 sp11.exe
 spfatal29.exe
 psxtmcond07.exe
 psxkey01.exe
 spsem02.exe
 ts-fatal-init-task-construct-failed.exe
 dumpbuf01.exe
 psxmsgq01.exe
 psxfatal01.exe
 devfs01.exe
 psxndbm01.exe
 mdosfs_fsscandir01.exe
 psxobj01.exe
 mimfs_fssymlink.exe
 rhilatency.exe
 psxcancel01.exe
 spfatal05.exe
 psxusleep.exe
 sp64.exe
 block11.exe
 pwdgrp02.exe
 spmrsp01.exe
 spfifo01.exe
 spntp01.exe
 spclock_todhook01.exe
 sp60.exe
 psxtmthread04.exe
 sp02.exe
 spfatal31.exe
 sptimecounter01.exe
 sperror01.exe
 tar02.exe
 psxmount.exe
 sp14.exe
 psxtmbarrier03.exe
 psxfile02.exe
 sppercpudata01.exe
 rhsemshuffle.exe
 psxpipe01.exe
 exit03.exe
 deviceio01.exe
 psxtmkey02.exe
 fsrofs01.exe
 sp62.exe
 tm04.exe
 spsem_err01.exe
 spmsgq_err02.exe
 sp58.exe
 block08.exe
 spedfsched02.exe
 mdosfs_fserror.exe
 monitor02.exe
 ts-validation-one-cpu-1.exe
 psxftw01.exe
 sp07.exe
 psxkey06.exe
 fsimfsconfig02.exe
 spsignal_err01.exe
 psxfile01.exe
 spsem01.exe
 spedfsched03.exe
 sp18.exe
 spsimplesched03.exe
 sp21.exe
 psxautoinit02.exe
 psxtmsleep02.exe
 base_sp.exe
 spmisc01.exe
 psx05.exe
 sp48.exe
 malloc03.exe
 mrfs_fstime.exe
 sp49.exe
 spintrcritical09.exe
 psxshm01.exe
 psxtmcond08.exe
 stackchk01.exe
 capture.exe
 psxconfstr.exe
 rhsemshuffle.exe
 psxkey09.exe
 tmtimer01.exe
 psxstat.exe
 psxtimer02.exe
 spfatal03.exe
 tftpfs.exe
 sptls02.exe
 dl05.exe
 ts-terminate.exe
 block16.exe
 psxtmrwlock07.exe
 psx12.exe
 spassoc01.exe
 spthread01.exe
 sp49.exe
 psxtmrwlock01.exe
 psxtmclocknanosleep01.exe
 pwdgrp01.exe
 psxtmthread03.exe
 sptls04.exe
 sppartition_err01.exe
 tm10.exe
 splinkersets01.exe
 psxtmmutex02.exe
 sp38.exe
 psxcond02.exe
 sp73.exe
 tm12.exe
 sp38.exe
 psxgetattrnp01.exe
 spfatal15.exe
 flashdisk01.exe
 termios03.exe
 psxtmbarrier02.exe
 block11.exe
 fileio.exe
 shell01.exe
 spsem02.exe
 sptask_err01.exe
 psxtmbarrier01.exe
 spstkalloc.exe
 ts-validation-acfg-1.exe
 sp51.exe
 psxfchx01.exe
 sptls02.exe
 spintrcritical03.exe
 dl09.exe
 exit01.exe
 psxalarm01.exe
 sptimecounter01.exe
 sp16.exe
 crypt01.exe
 psxtmsleep02.exe
 spnsext01.exe
 capture.exe
 sp19.exe
 psxtmrwlock02.exe
 sp03.exe
 psxtmcond02.exe
 sp76.exe
 block13.exe
 sp05.exe
 spcpuset01.exe
 stringto01.exe
 tm15.exe
 tm08.exe
 sp46.exe
 psximfs02.exe
 psxchroot01.exe
 tmck.exe
 psxconfig01.exe
 ts-performance-no-clock-0.exe
 spintrcritical18.exe
 spfatal32.exe
 spobjgetnext.exe
 psxmount.exe
 psxbarrier01.exe
 unlimited.exe
 mimfs_fsrdwr.exe
 psxtmnanosleep01.exe
 dl05.exe
 block05.exe
 sp20.exe
 spsem_err01.exe
 spthread01.exe
 ts-fatal-init-task-construct-failed.exe
 monitor02.exe
 nsecs.exe
 sp68.exe
 putenvtest.exe
 ts-validation-timecounter-1.exe
 block15.exe
 sp08.exe
 fsjffs2gc01.exe
 psxfenv01.exe
 spversion01.exe
 spcpuset01.exe
 mrfs_fstime.exe
 psxtimer01.exe
 psximfs02.exe
 spfifo04.exe
 psxtimer02.exe
 block15.exe
 mrfs_fsrename.exe
 sp32.exe
 mrfs_fsrdwr.exe
 spfatal10.exe
 psxcond02.exe
 tm02.exe
 sp77.exe
 sp71.exe
 mimfs_fserror.exe
 psxtmmutex07.exe
 psxtmmutexattr01.exe
 ts-userext.exe
 stackchk.exe
 psxcond01.exe
 ts-fatal-init-task-construct-failed.exe
 tm27.exe
 psxautoinit01.exe
 psxtmrwlock03.exe
 jffs2_fstime.exe
 sppps01.exe
 block02.exe
 spcbssched02.exe
 spinternalerror02.exe
 psxintrcritical01.exe
 spi01.exe
 tm19.exe
 sprbtree01.exe
 spcontext01.exe
 sp24.exe
 fsimfsconfig02.exe
 sp19.exe
 spsem_err02.exe
 cdtest.exe
 spglobalcon02.exe
 spintrcritical21.exe
 psxtime.exe
 sp74.exe
 sp59.exe
 block07.exe
 complex.exe
 psxsignal06.exe
 fsfseeko01.exe
 mdosfs_fsscandir01.exe
 sptimecounter02.exe
 tftpfs.exe
 jffs2_fspermission.exe
 psxmmap01.exe
 psx07.exe
 jffs2_fsscandir01.exe
 spmrsp01.exe
 dl01.exe
 psx13.exe
 spinternalerror02.exe
 dumpbuf01.exe
 ofw01.exe
 spqreslib.exe
 mrfs_fslink.exe
 psxstack01.exe
 psximfs01.exe
 spprivenv01.exe
 psxtmclocknanosleep03.exe
 spcpucounter01.exe
 spfifo04.exe
 sprmsched01.exe
 termios09.exe
 sptimespec01.exe
 fsfseeko01.exe
 spprintk.exe
 imfs_fslink.exe
 sp49.exe
 sp53.exe
 sp68.exe
 exit01.exe
 sp20.exe
 fileio.exe
 psximfs01.exe
 termios07.exe
 sp16.exe
 psxtmclocknanosleep02.exe
 fsrofs01.exe
 sptimecounter03.exe
 psx10.exe
 spconfig01.exe
 spintrcritical21.exe
 tm08.exe
 psxsignal07.exe
 tm36.exe
 spfatal30.exe
 sp26.exe
 psxmsgq01.exe
 psxautoinit02.exe
 fsfseeko01.exe
 sp06.exe
 hello.exe
 psxkey02.exe
 sp37.exe
 tar01.exe
 tm30.exe
 spsem_err02.exe
 ts-validation-tls-1.exe
 psx01.exe
 psxtmcond09.exe
 rhsemshuffle.exe
 spprintk.exe
 psxtmthread04.exe
 spfreechain01.exe
 spchain.exe
 psxcancel.exe
 psxmutexattr01.exe
 spintrcritical03.exe
 mrfs_fspermission.exe
 spntp01.exe
 sp60.exe
 sp45.exe
 ts-validation-one-cpu-0.exe
 ts-validation-non-smp.exe
 psxtmthread05.exe
 mrfs_fsrdwr.exe
 psxsignal04.exe
 psxsignal02.exe
 spprivenv01.exe
 mrfs_fsscandir01.exe
 psx08.exe
 sp76.exe
 sp53.exe
 ts-validation-io-kernel.exe
 psxtmmqrcvblock01.exe
 sprbtree01.exe
 tm25.exe
 termios09.exe
 fsimfsgeneric01.exe
 tar02.exe
 sp29.exe
 sp15.exe
 sptls01.exe
 tm32.exe
 block16.exe
 psxtmthread03.exe
 spsem03.exe
 putenvtest.exe
 psx06.exe
 ts-unit-no-clock-0.exe
 psxfenv01.exe
 psxtmbarrierattr01.exe
 spstkalloc03.exe
 psxtime.exe
 rbheap01.exe
 tmcontext01.exe
 psxcleanup.exe
 tm17.exe
 spsyslock01.exe
 malloc03.exe
 sptls02.exe
 devfs04.exe
 psxpasswd02.exe
 spfifo05.exe
 complex.exe
 psxsignal01.exe
 malloc02.exe
 sp34.exe
 dl08.exe
 psxglobalcon02.exe
 psxid01.exe
 mrfs_fserror.exe
 record02.exe
 spfifo04.exe
 psxchroot01.exe
 ts-validation-one-cpu-1.exe
 nsecs.exe
 sp63.exe
 termios09.exe
 fsclose01.exe
 termios01.exe
 spprivenv01.exe
 jffs2_fserror.exe
 sp47.exe
 heapwalk.exe
 spfatal28.exe
 psxpasswd01.exe
 spinternalerror01.exe
 psxtmclocknanosleep01.exe
 psxcleanup01.exe
 crypt01.exe
 sp69.exe
 ts-validation-cache.exe
 mimfs_fsrdwr.exe
 sp41.exe
 imfs_fstime.exe
 tmck.exe
 mdosfs_fstime.exe
 sp2038.exe
 exit03.exe
 sp42.exe
 malloc03.exe
 psxkey03.exe
 spintrcritical01.exe
 ts-validation-intr.exe
 spinternalerror01.exe
 dl02.exe
 spintrcritical11.exe
 psx11.exe
 spstkalloc02.exe
 fsimfsconfig02.exe
 flashdisk01.exe
 block08.exe
 psxtmsem05.exe
 sp14.exe
 psxpasswd02.exe
 sp72.exe
 psx03.exe
 psxtmrwlock02.exe
 spprofiling01.exe
 psxtmsem02.exe
 record01.exe
 psxglobalcon01.exe
 mrfs_fserror.exe
 dl08.exe
 psxfatal02.exe
 psxtmcond09.exe
 ttest01.exe
 psxkey05.exe
 stackchk02.exe
 tm31.exe
 dl02.exe
 psxtmmutex03.exe
 spfatal01.exe
 tm28.exe
 jffs2_fserror.exe
 psx07.exe
 spcbssched03.exe
 fsjffs2gc01.exe
 sptask_err01.exe
 mrfs_fsscandir01.exe
 sp30.exe
 block12.exe
 psxsignal04.exe
 monitor02.exe
 psxkey07.exe
 malloctest.exe
 block06.exe
 psxtmclocknanosleep02.exe
 psxkey09.exe
 psx14.exe
 sp52.exe
 math.exe
 paranoia.exe
 spsignal_err01.exe
 psxitimer.exe
 fsimfsgeneric01.exe
 mimfs_fserror.exe
 dl10.exe
 psxstack02.exe
 sptask_err02.exe
 tm21.exe
 spsimplesched02.exe
 spcache01.exe
 psxfilelock01.exe
 psxkey07.exe
 dl06.exe
 spheapprot.exe
 psx14.exe
 mdosfs_fserror.exe
 tm17.exe
 sptimecounter02.exe
 tm20.exe
 sp60.exe
 sp01.exe
 psxtmmqrcvblock01.exe
 malloc04.exe
 sp66.exe
 spsysinit01.exe
 psxfenv01.exe
 stackchk.exe
 spi01.exe
 psxtimer02.exe
 newlib01.exe
 spedfsched01.exe
 ts-validation-acfg-0.exe
 block12.exe
 mrfs_fsfpathconf.exe
 sp41.exe
 spintrcritical24.exe
 defaultconfig01.exe
 rtmonuse.exe
 sp27.exe
 sp44.exe
 ticker.exe
 rhtaskswitch.exe
 ts-userext.exe
 psxtmthreadattr01.exe
 sp29.exe
 sp59.exe
 mrfs_fssymlink.exe
 putenvtest.exe
 mimfs_fspermission.exe
 ts-validation-timecounter-1.exe
 block09.exe
 sptimer_err02.exe
 sptimer_err01.exe
 sp05.exe
 psxpipe01.exe
 psxtimer_face01.exe
 block11.exe
 ts-validation-1.exe
 spedfsched03.exe
 spintrcritical22.exe
 sp50.exe
 psxtmcond10.exe
 psxkey06.exe
 psxtmcond07.exe
 tm24.exe
 spedfsched02.exe
 psxfatal01.exe
 imfs_fserror.exe
 spintrcritical15.exe
 rhdeadlockbrk.exe
 dl10.exe
 spcontext01.exe
 spheapprot.exe
 psxshm01.exe
 sp30.exe
 sp42.exe
 sp70.exe
 sp05.exe
 psxtmrwlock06.exe
 psx13.exe
 ts-validation-1.exe
 spmutex01.exe
 spfatal12.exe
 psxaio01.exe
 spsize.exe
 sp57.exe
 psx02.exe
 imfs_fsscandir01.exe
 psxtmbarrier04.exe
 spfifo02.exe
 psxtmrwlock06.exe
 tm18.exe
 ts-validation-intr.exe
 spsysinit01.exe
 psxtmcond01.exe
 defaultconfig01.exe
 psxsignal07.exe
 sp41.exe
 psxndbm01.exe
 spratemon_err01.exe
 psxftw01.exe
 psxmsgq04.exe
 tm05.exe
 rhmlatency.exe
 block02.exe
 ts-validation-acfg-0.exe
 psx09.exe
 sp13.exe
 fsimfsconfig01.exe
 psxthreadname01.exe
 dl03.exe
 psx11.exe
 spintr_err01.exe
 tmonetoone.exe
 psxonce01.exe
 capture.exe
 spfatal03.exe
 psxenosys.exe
 psxtmthread01.exe
 tm09.exe
 spevent_err03.exe
 sp47.exe
 spfifo03.exe
 mathl.exe
 sprmsched02.exe
 tm33.exe
 math.exe
 jffs2_fstime.exe
 tm02.exe
 fsdosfsname01.exe
 sp73.exe
 psxtmthreadattr01.exe
 tm21.exe
 shell01.exe
 spconfig02.exe
 mimfs_fsscandir01.exe
 psxkey08.exe
 sp22.exe
 sppercpudata01.exe
 tmtimer01.exe
 psxtimes01.exe
 psxtmcond03.exe
 spintrcritical24.exe
 psxtmcond04.exe
 jffs2_fspatheval.exe
 imfs_fssymlink.exe
 unlimited.exe
 termios04.exe
 psxkey04.exe
 psxsignal01.exe
 sp67.exe
 mimfs_fsrdwr.exe
 spfatal09.exe
 psx03.exe
 mimfs_fsrename.exe
 spextensions01.exe
 jffs2_fssymlink.exe
 spintrcritical16.exe
 malloc04.exe
 spintrcritical09.exe
 block06.exe
 psxmmap01.exe
 bspcmdline01.exe
 tm03.exe
 ts-validation-no-clock-0.exe
 spstkalloc03.exe
 record02.exe
 spfatal15.exe
 spqreslib.exe
 spfatal10.exe
 psxtmmutex05.exe
 spglobalcon01.exe
 psxsysconf.exe
 capture01.exe
 sp22.exe
 psxonce01.exe
 tm36.exe
 psxtmmutex04.exe
 shell01.exe
 psxclock.exe
 top.exe
 sp45.exe
 psxmount.exe
 psxtmsem01.exe
 psxtimes01.exe
 tm06.exe
 psxtmsem02.exe
 irqs01.exe
 psxtmrwlock02.exe
 mrfs_fspatheval.exe
 spunlimited01.exe
 psxtmrwlock04.exe
 psxtmcond02.exe
 termios03.exe
 mdosfs_fsrdwr.exe
 psxstrsignal01.exe
 sp17.exe
 sp38.exe
 spsimplesched01.exe
 imfs_fserror.exe
 mrfs_fsscandir01.exe
 tm28.exe
 fsbdpart01.exe
 mathl.exe
 jffs2_fsrdwr.exe
Log
===

RTEMS Testing - Tester, 6.0.not_released
 Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=jmr3904 --log=run-jmr3904.log --use-gitconfig --mail .
 Host: Linux VM-CentOSStream8.rtems.com 4.18.0-358.el8.x86_64 #1 SMP Mon Jan 10 13:11:20 UTC 2022 x86_64
 Python: 2.7.18 (default, Jun 24 2022, 18:01:55) [GCC 8.5.0 20210514 (Red Hat 8.5.0-13)]
Host: Linux-4.18.0-358.el8.x86_64-x86_64-with-centos-8 (Linux VM-CentOSStream8.rtems.com 4.18.0-358.el8.x86_64 #1 SMP Mon Jan 10 13:11:20 UTC 2022 x86_64 x86_64)
[   1/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:0    W:0    | mipstx39/jmr3904: dhrystone.exe
Result: invalid   
Time: 0:00:00.503321 dhrystone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x191c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880191c0
=>  Loading section .init, size 0x48 lma ffffffff88019230
=>  Loading section .fini, size 0x30 lma ffffffff88019278
=>  Loading section .ctors, size 0x8 lma ffffffff880192a8
=>  Loading section .dtors, size 0x8 lma ffffffff880192b0
=>  Loading section .rdata, size 0x26f8 lma ffffffff880192c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b9b8
=>  Loading section .data, size 0x5b8 lma ffffffff8801b9d0
=>  Start address ffffffff88000004
=>  Transfer rate: 916480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/dhrystone.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[   2/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:0    W:0    | mipstx39/jmr3904: linpack.exe
Result: invalid   
Time: 0:00:00.253840 linpack.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a760 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a760
=>  Loading section .init, size 0x48 lma ffffffff8801a7d0
=>  Loading section .fini, size 0x30 lma ffffffff8801a818
=>  Loading section .ctors, size 0x8 lma ffffffff8801a848
=>  Loading section .dtors, size 0x8 lma ffffffff8801a850
=>  Loading section .rdata, size 0x2470 lma ffffffff8801a860
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ccd0
=>  Loading section .data, size 0x5b8 lma ffffffff8801cce8
=>  Start address ffffffff88000004
=>  Transfer rate: 955584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/linpack.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[   3/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:0    W:0    | mipstx39/jmr3904: whetstone.exe
Result: invalid   
Time: 0:00:00.256796 whetstone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19a00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019a00
=>  Loading section .init, size 0x48 lma ffffffff88019a70
=>  Loading section .fini, size 0x30 lma ffffffff88019ab8
=>  Loading section .ctors, size 0x8 lma ffffffff88019ae8
=>  Loading section .dtors, size 0x8 lma ffffffff88019af0
=>  Loading section .rdata, size 0x2328 lma ffffffff88019b00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801be28
=>  Loading section .data, size 0x5c8 lma ffffffff8801be40
=>  Start address ffffffff88000004
=>  Transfer rate: 925696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/benchmarks/whetstone.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[   4/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:0    W:0    | mipstx39/jmr3904: fsbdpart01.exe
Result: invalid   
Time: 0:00:00.324885 fsbdpart01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22710 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022710
=>  Loading section .init, size 0x48 lma ffffffff88022780
=>  Loading section .fini, size 0x30 lma ffffffff880227c8
=>  Loading section .ctors, size 0x8 lma ffffffff880227f8
=>  Loading section .dtors, size 0x8 lma ffffffff88022800
=>  Loading section .rdata, size 0x28c0 lma ffffffff88022810
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880250d0
=>  Loading section .data, size 0x60c lma ffffffff880250e8
=>  Start address ffffffff88000004
=>  Transfer rate: 1226592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsbdpart01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[   5/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:0    W:0    | mipstx39/jmr3904: fsclose01.exe
Result: invalid   
Time: 0:00:00.262848 fsclose01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a6f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a6f0
=>  Loading section .init, size 0x48 lma ffffffff8801a760
=>  Loading section .fini, size 0x30 lma ffffffff8801a7a8
=>  Loading section .ctors, size 0x8 lma ffffffff8801a7d8
=>  Loading section .dtors, size 0x8 lma ffffffff8801a7e0
=>  Loading section .rdata, size 0x23a0 lma ffffffff8801a7f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cb90
=>  Loading section .data, size 0x5c4 lma ffffffff8801cba8
=>  Start address ffffffff88000004
=>  Transfer rate: 953120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsclose01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[   6/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:0    W:0    | mipstx39/jmr3904: fsdosfsformat01.exe
Result: invalid   
Time: 0:00:00.503571 fsdosfsformat01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2a9a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8802a9a0
=>  Loading section .init, size 0x48 lma ffffffff8802aa10
=>  Loading section .fini, size 0x30 lma ffffffff8802aa58
=>  Loading section .ctors, size 0x8 lma ffffffff8802aa88
=>  Loading section .dtors, size 0x8 lma ffffffff8802aa90
=>  Loading section .rdata, size 0x2b2c lma ffffffff8802aaa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802d5d0
=>  Loading section .data, size 0x5e8 lma ffffffff8802d5e8
=>  Start address ffffffff88000004
=>  Transfer rate: 1498656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsformat01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[   7/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:0    W:0    | mipstx39/jmr3904: fsdosfsname01.exe
Result: invalid   
Time: 0:00:00.271867 fsdosfsname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x31ec0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88031ec0
=>  Loading section .init, size 0x48 lma ffffffff88031f30
=>  Loading section .fini, size 0x30 lma ffffffff88031f78
=>  Loading section .ctors, size 0x8 lma ffffffff88031fa8
=>  Loading section .dtors, size 0x8 lma ffffffff88031fb0
=>  Loading section .rdata, size 0x12172c lma ffffffff88031fc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff881536f0
=>  Loading section .data, size 0x2c4e8 lma ffffffff88153708
=>  Start address ffffffff88000004
=>  Transfer rate: 12574496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[   8/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:0    W:0    | mipstx39/jmr3904: fsdosfsname02.exe
Result: invalid   
Time: 0:00:00.502433 fsdosfsname02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x25670 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88025670
=>  Loading section .init, size 0x48 lma ffffffff880256e0
=>  Loading section .fini, size 0x30 lma ffffffff88025728
=>  Loading section .ctors, size 0x8 lma ffffffff88025758
=>  Loading section .dtors, size 0x8 lma ffffffff88025760
=>  Loading section .rdata, size 0x2908 lma ffffffff88025770
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028078
=>  Loading section .data, size 0x600 lma ffffffff88028090
=>  Start address ffffffff88000004
=>  Transfer rate: 1324096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfsname02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[   9/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:4    W:0    | mipstx39/jmr3904: fsdosfssync01.exe
Result: invalid   
Time: 0:00:00.252351 fsdosfssync01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26610 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88026610
=>  Loading section .init, size 0x48 lma ffffffff88026680
=>  Loading section .fini, size 0x30 lma ffffffff880266c8
=>  Loading section .ctors, size 0x8 lma ffffffff880266f8
=>  Loading section .dtors, size 0x8 lma ffffffff88026700
=>  Loading section .rdata, size 0x27c0 lma ffffffff88026710
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028ed0
=>  Loading section .data, size 0x610 lma ffffffff88028ee8
=>  Start address ffffffff88000004
=>  Transfer rate: 1353600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfssync01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  10/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:4    W:0    | mipstx39/jmr3904: fsdosfswrite01.exe
Result: invalid   
Time: 0:00:00.262040 fsdosfswrite01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27940 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027940
=>  Loading section .init, size 0x48 lma ffffffff880279b0
=>  Loading section .fini, size 0x30 lma ffffffff880279f8
=>  Loading section .ctors, size 0x8 lma ffffffff88027a28
=>  Loading section .dtors, size 0x8 lma ffffffff88027a30
=>  Loading section .rdata, size 0x28b8 lma ffffffff88027a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802a2f8
=>  Loading section .data, size 0x5e8 lma ffffffff8802a310
=>  Start address ffffffff88000004
=>  Transfer rate: 1394560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsdosfswrite01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  11/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:4    W:0    | mipstx39/jmr3904: fsfseeko01.exe
Result: invalid   
Time: 0:00:00.253716 fsfseeko01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x123f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880123f0
=>  Loading section .init, size 0x48 lma ffffffff88012460
=>  Loading section .fini, size 0x30 lma ffffffff880124a8
=>  Loading section .ctors, size 0x8 lma ffffffff880124d8
=>  Loading section .dtors, size 0x8 lma ffffffff880124e0
=>  Loading section .rdata, size 0x1a5d lma ffffffff880124f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f50
=>  Loading section .data, size 0x420 lma ffffffff88013f68
=>  Start address ffffffff88000004
=>  Transfer rate: 662504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsfseeko01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  12/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:5    W:0    | mipstx39/jmr3904: fsimfsconfig01.exe
Result: invalid   
Time: 0:00:00.273718 fsimfsconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10650 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88010650
=>  Loading section .init, size 0x48 lma ffffffff880106b0
=>  Loading section .fini, size 0x30 lma ffffffff880106f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010728
=>  Loading section .dtors, size 0x8 lma ffffffff88010730
=>  Loading section .rdata, size 0x1b08 lma ffffffff88010740
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012248
=>  Loading section .data, size 0x3c8 lma ffffffff88012260
=>  Start address ffffffff88000004
=>  Transfer rate: 602368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  13/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:11   W:0    | mipstx39/jmr3904: fsimfsconfig02.exe
Result: invalid   
Time: 0:00:00.257495 fsimfsconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f920
=>  Loading section .init, size 0x48 lma ffffffff8800f990
=>  Loading section .fini, size 0x30 lma ffffffff8800f9d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fa08
=>  Loading section .dtors, size 0x8 lma ffffffff8800fa10
=>  Loading section .rdata, size 0x1a59 lma ffffffff8800fa20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011480
=>  Loading section .data, size 0x408 lma ffffffff88011498
=>  Start address ffffffff88000004
=>  Transfer rate: 574600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  14/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:12   W:0    | mipstx39/jmr3904: fsimfsconfig03.exe
Result: invalid   
Time: 0:00:00.265800 fsimfsconfig03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10760 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88010760
=>  Loading section .init, size 0x48 lma ffffffff880107c0
=>  Loading section .fini, size 0x30 lma ffffffff88010808
=>  Loading section .ctors, size 0x8 lma ffffffff88010838
=>  Loading section .dtors, size 0x8 lma ffffffff88010840
=>  Loading section .rdata, size 0x1a79 lma ffffffff88010850
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122d0
=>  Loading section .data, size 0x3c8 lma ffffffff880122e8
=>  Start address ffffffff88000004
=>  Transfer rate: 603400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsconfig03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  15/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:12   W:0    | mipstx39/jmr3904: fsimfsgeneric01.exe
Result: invalid   
Time: 0:00:00.259393 fsimfsgeneric01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12b30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012b30
=>  Loading section .init, size 0x48 lma ffffffff88012ba0
=>  Loading section .fini, size 0x30 lma ffffffff88012be8
=>  Loading section .ctors, size 0x8 lma ffffffff88012c18
=>  Loading section .dtors, size 0x8 lma ffffffff88012c20
=>  Loading section .rdata, size 0x1d84 lma ffffffff88012c30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880149b8
=>  Loading section .data, size 0x448 lma ffffffff880149d0
=>  Start address ffffffff88000004
=>  Transfer rate: 684128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsimfsgeneric01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  16/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:12   W:0    | mipstx39/jmr3904: fsjffs2gc01.exe
Result: invalid   
Time: 0:00:00.257221 fsjffs2gc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e9e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e9e0
=>  Loading section .init, size 0x48 lma ffffffff8801ea50
=>  Loading section .fini, size 0x30 lma ffffffff8801ea98
=>  Loading section .ctors, size 0x8 lma ffffffff8801eac8
=>  Loading section .dtors, size 0x8 lma ffffffff8801ead0
=>  Loading section .rdata, size 0x5239 lma ffffffff8801eae0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023d20
=>  Loading section .data, size 0x214b8 lma ffffffff88023d38
=>  Start address ffffffff88000004
=>  Transfer rate: 2264840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsjffs2gc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  17/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:12   W:0    | mipstx39/jmr3904: fsnofs01.exe
Result: invalid   
Time: 0:00:00.269778 fsnofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe2b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800e2b0
=>  Loading section .init, size 0x48 lma ffffffff8800e320
=>  Loading section .fini, size 0x30 lma ffffffff8800e368
=>  Loading section .ctors, size 0x8 lma ffffffff8800e398
=>  Loading section .dtors, size 0x8 lma ffffffff8800e3a0
=>  Loading section .rdata, size 0x1f0d lma ffffffff8800e3b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880102c0
=>  Loading section .data, size 0x3f8 lma ffffffff880102d8
=>  Start address ffffffff88000004
=>  Transfer rate: 538152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsnofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  18/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:12   W:0    | mipstx39/jmr3904: fsrfsbitmap01.exe
Result: invalid   
Time: 0:00:00.274987 fsrfsbitmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21ff0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021ff0
=>  Loading section .init, size 0x48 lma ffffffff88022060
=>  Loading section .fini, size 0x30 lma ffffffff880220a8
=>  Loading section .ctors, size 0x8 lma ffffffff880220d8
=>  Loading section .dtors, size 0x8 lma ffffffff880220e0
=>  Loading section .rdata, size 0x5724 lma ffffffff880220f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027818
=>  Loading section .data, size 0x490 lma ffffffff88027830
=>  Start address ffffffff88000004
=>  Transfer rate: 1303968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrfsbitmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  19/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:12   W:0    | mipstx39/jmr3904: fsrofs01.exe
Result: invalid   
Time: 0:00:00.256819 fsrofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20e00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88020e00
=>  Loading section .init, size 0x48 lma ffffffff88020e70
=>  Loading section .fini, size 0x30 lma ffffffff88020eb8
=>  Loading section .ctors, size 0x8 lma ffffffff88020ee8
=>  Loading section .dtors, size 0x8 lma ffffffff88020ef0
=>  Loading section .rdata, size 0x4c28 lma ffffffff88020f00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025b28
=>  Loading section .data, size 0x468 lma ffffffff88025b40
=>  Start address ffffffff88000004
=>  Transfer rate: 1244416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/fsrofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  20/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:12   W:0    | mipstx39/jmr3904: imfs_fserror.exe
Result: invalid   
Time: 0:00:00.257694 imfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018520
=>  Loading section .init, size 0x48 lma ffffffff88018590
=>  Loading section .fini, size 0x30 lma ffffffff880185d8
=>  Loading section .ctors, size 0x8 lma ffffffff88018608
=>  Loading section .dtors, size 0x8 lma ffffffff88018610
=>  Loading section .rdata, size 0x2550 lma ffffffff88018620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ab70
=>  Loading section .data, size 0x5bc lma ffffffff8801ab88
=>  Start address ffffffff88000004
=>  Transfer rate: 887264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  21/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:20   W:0    | mipstx39/jmr3904: imfs_fslink.exe
Result: invalid   
Time: 0:00:00.251909 imfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10cc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010cc0
=>  Loading section .init, size 0x48 lma ffffffff88010d30
=>  Loading section .fini, size 0x30 lma ffffffff88010d78
=>  Loading section .ctors, size 0x8 lma ffffffff88010da8
=>  Loading section .dtors, size 0x8 lma ffffffff88010db0
=>  Loading section .rdata, size 0x1b91 lma ffffffff88010dc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012958
=>  Loading section .data, size 0x450 lma ffffffff88012970
=>  Start address ffffffff88000004
=>  Transfer rate: 617864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  22/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:20   W:0    | mipstx39/jmr3904: imfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.257029 imfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119e0
=>  Loading section .init, size 0x48 lma ffffffff88011a50
=>  Loading section .fini, size 0x30 lma ffffffff88011a98
=>  Loading section .ctors, size 0x8 lma ffffffff88011ac8
=>  Loading section .dtors, size 0x8 lma ffffffff88011ad0
=>  Loading section .rdata, size 0x1d15 lma ffffffff88011ae0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880137f8
=>  Loading section .data, size 0x450 lma ffffffff88013810
=>  Start address ffffffff88000004
=>  Transfer rate: 647848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  23/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:20   W:0    | mipstx39/jmr3904: imfs_fspermission.exe
Result: invalid   
Time: 0:00:00.251834 imfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x187a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880187a0
=>  Loading section .init, size 0x48 lma ffffffff88018810
=>  Loading section .fini, size 0x30 lma ffffffff88018858
=>  Loading section .ctors, size 0x8 lma ffffffff88018888
=>  Loading section .dtors, size 0x8 lma ffffffff88018890
=>  Loading section .rdata, size 0x23f0 lma ffffffff880188a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ac90
=>  Loading section .data, size 0x5bc lma ffffffff8801aca8
=>  Start address ffffffff88000004
=>  Transfer rate: 889568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  24/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:20   W:0    | mipstx39/jmr3904: imfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.263831 imfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013690
=>  Loading section .init, size 0x48 lma ffffffff88013700
=>  Loading section .fini, size 0x30 lma ffffffff88013748
=>  Loading section .ctors, size 0x8 lma ffffffff88013778
=>  Loading section .dtors, size 0x8 lma ffffffff88013780
=>  Loading section .rdata, size 0x2015 lma ffffffff88013790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880157a8
=>  Loading section .data, size 0x450 lma ffffffff880157c0
=>  Start address ffffffff88000004
=>  Transfer rate: 712744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  25/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:20   W:0    | mipstx39/jmr3904: imfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.252775 imfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11820 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011820
=>  Loading section .init, size 0x48 lma ffffffff88011890
=>  Loading section .fini, size 0x30 lma ffffffff880118d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011908
=>  Loading section .dtors, size 0x8 lma ffffffff88011910
=>  Loading section .rdata, size 0x1ba5 lma ffffffff88011920
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134c8
=>  Loading section .data, size 0x450 lma ffffffff880134e0
=>  Start address ffffffff88000004
=>  Transfer rate: 641320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  26/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:20   W:0    | mipstx39/jmr3904: imfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.300525 imfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11250 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011250
=>  Loading section .init, size 0x48 lma ffffffff880112c0
=>  Loading section .fini, size 0x30 lma ffffffff88011308
=>  Loading section .ctors, size 0x8 lma ffffffff88011338
=>  Loading section .dtors, size 0x8 lma ffffffff88011340
=>  Loading section .rdata, size 0x1ced lma ffffffff88011350
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013040
=>  Loading section .data, size 0x450 lma ffffffff88013058
=>  Start address ffffffff88000004
=>  Transfer rate: 632040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  27/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:20   W:0    | mipstx39/jmr3904: imfs_fstime.exe
Result: invalid   
Time: 0:00:00.292951 imfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x122d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880122d0
=>  Loading section .init, size 0x48 lma ffffffff88012340
=>  Loading section .fini, size 0x30 lma ffffffff88012388
=>  Loading section .ctors, size 0x8 lma ffffffff880123b8
=>  Loading section .dtors, size 0x8 lma ffffffff880123c0
=>  Loading section .rdata, size 0x1cc8 lma ffffffff880123d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014098
=>  Loading section .data, size 0x45c lma ffffffff880140b0
=>  Start address ffffffff88000004
=>  Transfer rate: 665632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/imfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  28/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:20   W:0    | mipstx39/jmr3904: jffs2_fserror.exe
Result: invalid   
Time: 0:00:00.281121 jffs2_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26180 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88026180
=>  Loading section .init, size 0x48 lma ffffffff880261f0
=>  Loading section .fini, size 0x30 lma ffffffff88026238
=>  Loading section .ctors, size 0x8 lma ffffffff88026268
=>  Loading section .dtors, size 0x8 lma ffffffff88026270
=>  Loading section .rdata, size 0x5918 lma ffffffff88026280
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802bb98
=>  Loading section .data, size 0x2161c lma ffffffff8802bbb0
=>  Start address ffffffff88000004
=>  Transfer rate: 2526752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  29/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:25   W:0    | mipstx39/jmr3904: jffs2_fslink.exe
Result: invalid   
Time: 0:00:00.254753 jffs2_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e990 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e990
=>  Loading section .init, size 0x48 lma ffffffff8801ea00
=>  Loading section .fini, size 0x30 lma ffffffff8801ea48
=>  Loading section .ctors, size 0x8 lma ffffffff8801ea78
=>  Loading section .dtors, size 0x8 lma ffffffff8801ea80
=>  Loading section .rdata, size 0x4f99 lma ffffffff8801ea90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023a30
=>  Loading section .data, size 0x214b0 lma ffffffff88023a48
=>  Start address ffffffff88000004
=>  Transfer rate: 2258760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  30/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:25   W:0    | mipstx39/jmr3904: jffs2_fspatheval.exe
Result: invalid   
Time: 0:00:00.261614 jffs2_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1f6a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801f6a0
=>  Loading section .init, size 0x48 lma ffffffff8801f710
=>  Loading section .fini, size 0x30 lma ffffffff8801f758
=>  Loading section .ctors, size 0x8 lma ffffffff8801f788
=>  Loading section .dtors, size 0x8 lma ffffffff8801f790
=>  Loading section .rdata, size 0x511d lma ffffffff8801f7a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880248c0
=>  Loading section .data, size 0x214b0 lma ffffffff880248d8
=>  Start address ffffffff88000004
=>  Transfer rate: 2288616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  31/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:25   W:0    | mipstx39/jmr3904: jffs2_fspermission.exe
Result: invalid   
Time: 0:00:00.253754 jffs2_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88026400
=>  Loading section .init, size 0x48 lma ffffffff88026470
=>  Loading section .fini, size 0x30 lma ffffffff880264b8
=>  Loading section .ctors, size 0x8 lma ffffffff880264e8
=>  Loading section .dtors, size 0x8 lma ffffffff880264f0
=>  Loading section .rdata, size 0x57b8 lma ffffffff88026500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802bcb8
=>  Loading section .data, size 0x2161c lma ffffffff8802bcd0
=>  Start address ffffffff88000004
=>  Transfer rate: 2529056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  32/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:25   W:0    | mipstx39/jmr3904: jffs2_fsrdwr.exe
Result: invalid   
Time: 0:00:00.257053 jffs2_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21280 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021280
=>  Loading section .init, size 0x48 lma ffffffff880212f0
=>  Loading section .fini, size 0x30 lma ffffffff88021338
=>  Loading section .ctors, size 0x8 lma ffffffff88021368
=>  Loading section .dtors, size 0x8 lma ffffffff88021370
=>  Loading section .rdata, size 0x5425 lma ffffffff88021380
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880267a8
=>  Loading section .data, size 0x214b8 lma ffffffff880267c0
=>  Start address ffffffff88000004
=>  Transfer rate: 2351976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  33/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:25   W:0    | mipstx39/jmr3904: jffs2_fsscandir01.exe
Result: invalid   
Time: 0:00:00.261763 jffs2_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1f4f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801f4f0
=>  Loading section .init, size 0x48 lma ffffffff8801f560
=>  Loading section .fini, size 0x30 lma ffffffff8801f5a8
=>  Loading section .ctors, size 0x8 lma ffffffff8801f5d8
=>  Loading section .dtors, size 0x8 lma ffffffff8801f5e0
=>  Loading section .rdata, size 0x4fad lma ffffffff8801f5f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880245a0
=>  Loading section .data, size 0x214b0 lma ffffffff880245b8
=>  Start address ffffffff88000004
=>  Transfer rate: 2282216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  34/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:31   W:0    | mipstx39/jmr3904: jffs2_fssymlink.exe
Result: invalid   
Time: 0:00:00.251951 jffs2_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ee40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ee40
=>  Loading section .init, size 0x48 lma ffffffff8801eeb0
=>  Loading section .fini, size 0x30 lma ffffffff8801eef8
=>  Loading section .ctors, size 0x8 lma ffffffff8801ef28
=>  Loading section .dtors, size 0x8 lma ffffffff8801ef30
=>  Loading section .rdata, size 0x50f5 lma ffffffff8801ef40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024038
=>  Loading section .data, size 0x214b0 lma ffffffff88024050
=>  Start address ffffffff88000004
=>  Transfer rate: 2271144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  35/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:33   W:0    | mipstx39/jmr3904: jffs2_fstime.exe
Result: invalid   
Time: 0:00:00.253634 jffs2_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ffa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ffa0
=>  Loading section .init, size 0x48 lma ffffffff88020010
=>  Loading section .fini, size 0x30 lma ffffffff88020058
=>  Loading section .ctors, size 0x8 lma ffffffff88020088
=>  Loading section .dtors, size 0x8 lma ffffffff88020090
=>  Loading section .rdata, size 0x50d0 lma ffffffff880200a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025170
=>  Loading section .data, size 0x214bc lma ffffffff88025188
=>  Start address ffffffff88000004
=>  Transfer rate: 2306528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/jffs2_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  36/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:33   W:0    | mipstx39/jmr3904: mdosfs_fserror.exe
Result: invalid   
Time: 0:00:00.302542 mdosfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2b7e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8802b7e0
=>  Loading section .init, size 0x48 lma ffffffff8802b850
=>  Loading section .fini, size 0x30 lma ffffffff8802b898
=>  Loading section .ctors, size 0x8 lma ffffffff8802b8c8
=>  Loading section .dtors, size 0x8 lma ffffffff8802b8d0
=>  Loading section .rdata, size 0x2fbc lma ffffffff8802b8e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802e8a0
=>  Loading section .data, size 0x650 lma ffffffff8802e8b8
=>  Start address ffffffff88000004
=>  Transfer rate: 1538016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  37/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:33   W:0    | mipstx39/jmr3904: mdosfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.307538 mdosfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27b20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027b20
=>  Loading section .init, size 0x48 lma ffffffff88027b90
=>  Loading section .fini, size 0x30 lma ffffffff88027bd8
=>  Loading section .ctors, size 0x8 lma ffffffff88027c08
=>  Loading section .dtors, size 0x8 lma ffffffff88027c10
=>  Loading section .rdata, size 0x2b90 lma ffffffff88027c20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802a7b0
=>  Loading section .data, size 0x650 lma ffffffff8802a7c8
=>  Start address ffffffff88000004
=>  Transfer rate: 1405056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  38/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:33   W:0    | mipstx39/jmr3904: mdosfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.267581 mdosfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x298d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880298d0
=>  Loading section .init, size 0x48 lma ffffffff88029940
=>  Loading section .fini, size 0x30 lma ffffffff88029988
=>  Loading section .ctors, size 0x8 lma ffffffff880299b8
=>  Loading section .dtors, size 0x8 lma ffffffff880299c0
=>  Loading section .rdata, size 0x2e88 lma ffffffff880299d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c858
=>  Loading section .data, size 0x650 lma ffffffff8802c870
=>  Start address ffffffff88000004
=>  Transfer rate: 1471936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  39/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:33   W:0    | mipstx39/jmr3904: mdosfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.268150 mdosfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27e20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027e20
=>  Loading section .init, size 0x48 lma ffffffff88027e90
=>  Loading section .fini, size 0x30 lma ffffffff88027ed8
=>  Loading section .ctors, size 0x8 lma ffffffff88027f08
=>  Loading section .dtors, size 0x8 lma ffffffff88027f10
=>  Loading section .rdata, size 0x2a18 lma ffffffff88027f20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802a938
=>  Loading section .data, size 0x650 lma ffffffff8802a950
=>  Start address ffffffff88000004
=>  Transfer rate: 1408192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  40/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:34   W:0    | mipstx39/jmr3904: mdosfs_fsstatvfs.exe
Result: invalid   
Time: 0:00:00.251560 mdosfs_fsstatvfs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26f20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88026f20
=>  Loading section .init, size 0x48 lma ffffffff88026f90
=>  Loading section .fini, size 0x30 lma ffffffff88026fd8
=>  Loading section .ctors, size 0x8 lma ffffffff88027008
=>  Loading section .dtors, size 0x8 lma ffffffff88027010
=>  Loading section .rdata, size 0x2b70 lma ffffffff88027020
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88029b90
=>  Loading section .data, size 0x650 lma ffffffff88029ba8
=>  Start address ffffffff88000004
=>  Transfer rate: 1380224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fsstatvfs.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  41/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:34   W:0    | mipstx39/jmr3904: mdosfs_fstime.exe
Result: invalid   
Time: 0:00:00.262225 mdosfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x285c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880285c0
=>  Loading section .init, size 0x48 lma ffffffff88028630
=>  Loading section .fini, size 0x30 lma ffffffff88028678
=>  Loading section .ctors, size 0x8 lma ffffffff880286a8
=>  Loading section .dtors, size 0x8 lma ffffffff880286b0
=>  Loading section .rdata, size 0x2b24 lma ffffffff880286c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b1e8
=>  Loading section .data, size 0x65c lma ffffffff8802b200
=>  Start address ffffffff88000004
=>  Transfer rate: 1426048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mdosfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  42/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:35   W:0    | mipstx39/jmr3904: mimfs_fserror.exe
Result: invalid   
Time: 0:00:00.278542 mimfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19180 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019180
=>  Loading section .init, size 0x48 lma ffffffff880191f0
=>  Loading section .fini, size 0x30 lma ffffffff88019238
=>  Loading section .ctors, size 0x8 lma ffffffff88019268
=>  Loading section .dtors, size 0x8 lma ffffffff88019270
=>  Loading section .rdata, size 0x2678 lma ffffffff88019280
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b8f8
=>  Loading section .data, size 0x5ec lma ffffffff8801b910
=>  Start address ffffffff88000004
=>  Transfer rate: 915360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  43/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:40   W:0    | mipstx39/jmr3904: mimfs_fslink.exe
Result: invalid   
Time: 0:00:00.261262 mimfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011930
=>  Loading section .init, size 0x48 lma ffffffff880119a0
=>  Loading section .fini, size 0x30 lma ffffffff880119e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011a18
=>  Loading section .dtors, size 0x8 lma ffffffff88011a20
=>  Loading section .rdata, size 0x1cb5 lma ffffffff88011a30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136e8
=>  Loading section .data, size 0x480 lma ffffffff88013700
=>  Start address ffffffff88000004
=>  Transfer rate: 646056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  44/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:41   W:0    | mipstx39/jmr3904: mimfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.253251 mimfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12650 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012650
=>  Loading section .init, size 0x48 lma ffffffff880126c0
=>  Loading section .fini, size 0x30 lma ffffffff88012708
=>  Loading section .ctors, size 0x8 lma ffffffff88012738
=>  Loading section .dtors, size 0x8 lma ffffffff88012740
=>  Loading section .rdata, size 0x1e39 lma ffffffff88012750
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014590
=>  Loading section .data, size 0x480 lma ffffffff880145a8
=>  Start address ffffffff88000004
=>  Transfer rate: 676040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  45/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:41   W:0    | mipstx39/jmr3904: mimfs_fspermission.exe
Result: invalid   
Time: 0:00:00.251578 mimfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019400
=>  Loading section .init, size 0x48 lma ffffffff88019470
=>  Loading section .fini, size 0x30 lma ffffffff880194b8
=>  Loading section .ctors, size 0x8 lma ffffffff880194e8
=>  Loading section .dtors, size 0x8 lma ffffffff880194f0
=>  Loading section .rdata, size 0x2510 lma ffffffff88019500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ba10
=>  Loading section .data, size 0x5ec lma ffffffff8801ba28
=>  Start address ffffffff88000004
=>  Transfer rate: 917600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  46/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:42   W:0    | mipstx39/jmr3904: mimfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.266081 mimfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14300 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014300
=>  Loading section .init, size 0x48 lma ffffffff88014370
=>  Loading section .fini, size 0x30 lma ffffffff880143b8
=>  Loading section .ctors, size 0x8 lma ffffffff880143e8
=>  Loading section .dtors, size 0x8 lma ffffffff880143f0
=>  Loading section .rdata, size 0x2139 lma ffffffff88014400
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016540
=>  Loading section .data, size 0x480 lma ffffffff88016558
=>  Start address ffffffff88000004
=>  Transfer rate: 740936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  47/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:42   W:0    | mipstx39/jmr3904: mimfs_fsrename.exe
Result: invalid   
Time: 0:00:00.263250 mimfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801c150
=>  Loading section .init, size 0x48 lma ffffffff8801c1c0
=>  Loading section .fini, size 0x30 lma ffffffff8801c208
=>  Loading section .ctors, size 0x8 lma ffffffff8801c238
=>  Loading section .dtors, size 0x8 lma ffffffff8801c240
=>  Loading section .rdata, size 0x2ba0 lma ffffffff8801c250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801edf0
=>  Loading section .data, size 0x5ec lma ffffffff8801ee08
=>  Start address ffffffff88000004
=>  Transfer rate: 1023840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  48/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:42   W:0    | mipstx39/jmr3904: mimfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.272226 mimfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12490 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012490
=>  Loading section .init, size 0x48 lma ffffffff88012500
=>  Loading section .fini, size 0x30 lma ffffffff88012548
=>  Loading section .ctors, size 0x8 lma ffffffff88012578
=>  Loading section .dtors, size 0x8 lma ffffffff88012580
=>  Loading section .rdata, size 0x1cc9 lma ffffffff88012590
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014260
=>  Loading section .data, size 0x480 lma ffffffff88014278
=>  Start address ffffffff88000004
=>  Transfer rate: 669512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  49/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:42   W:0    | mipstx39/jmr3904: mimfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.306305 mimfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11eb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011eb0
=>  Loading section .init, size 0x48 lma ffffffff88011f20
=>  Loading section .fini, size 0x30 lma ffffffff88011f68
=>  Loading section .ctors, size 0x8 lma ffffffff88011f98
=>  Loading section .dtors, size 0x8 lma ffffffff88011fa0
=>  Loading section .rdata, size 0x1e11 lma ffffffff88011fb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013dc8
=>  Loading section .data, size 0x480 lma ffffffff88013de0
=>  Start address ffffffff88000004
=>  Transfer rate: 660104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  50/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:42   W:0    | mipstx39/jmr3904: mimfs_fstime.exe
Result: invalid   
Time: 0:00:00.262912 mimfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12f30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012f30
=>  Loading section .init, size 0x48 lma ffffffff88012fa0
=>  Loading section .fini, size 0x30 lma ffffffff88012fe8
=>  Loading section .ctors, size 0x8 lma ffffffff88013018
=>  Loading section .dtors, size 0x8 lma ffffffff88013020
=>  Loading section .rdata, size 0x1dec lma ffffffff88013030
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014e20
=>  Loading section .data, size 0x48c lma ffffffff88014e38
=>  Start address ffffffff88000004
=>  Transfer rate: 693696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mimfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  51/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:48   W:0    | mipstx39/jmr3904: mrfs_fserror.exe
Result: invalid   
Time: 0:00:00.265051 mrfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x283a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880283a0
=>  Loading section .init, size 0x48 lma ffffffff88028410
=>  Loading section .fini, size 0x30 lma ffffffff88028458
=>  Loading section .ctors, size 0x8 lma ffffffff88028488
=>  Loading section .dtors, size 0x8 lma ffffffff88028490
=>  Loading section .rdata, size 0x5718 lma ffffffff880284a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802dbb8
=>  Loading section .data, size 0x5fc lma ffffffff8802dbd0
=>  Start address ffffffff88000004
=>  Transfer rate: 1510944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  52/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:48   W:0    | mipstx39/jmr3904: mrfs_fsfpathconf.exe
Result: invalid   
Time: 0:00:00.260162 mrfs_fsfpathconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20780 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88020780
=>  Loading section .init, size 0x48 lma ffffffff880207f0
=>  Loading section .fini, size 0x30 lma ffffffff88020838
=>  Loading section .ctors, size 0x8 lma ffffffff88020868
=>  Loading section .dtors, size 0x8 lma ffffffff88020870
=>  Loading section .rdata, size 0x4f4c lma ffffffff88020880
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880257d0
=>  Loading section .data, size 0x490 lma ffffffff880257e8
=>  Start address ffffffff88000004
=>  Transfer rate: 1237856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsfpathconf.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  53/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:47   W:0    | mipstx39/jmr3904: mrfs_fslink.exe
Result: invalid   
Time: 0:00:00.290820 mrfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88020c80
=>  Loading section .init, size 0x48 lma ffffffff88020cf0
=>  Loading section .fini, size 0x30 lma ffffffff88020d38
=>  Loading section .ctors, size 0x8 lma ffffffff88020d68
=>  Loading section .dtors, size 0x8 lma ffffffff88020d70
=>  Loading section .rdata, size 0x4d6c lma ffffffff88020d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88025af0
=>  Loading section .data, size 0x490 lma ffffffff88025b08
=>  Start address ffffffff88000004
=>  Transfer rate: 1244256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  54/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:47   W:0    | mipstx39/jmr3904: mrfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.276427 mrfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x216e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880216e0
=>  Loading section .init, size 0x48 lma ffffffff88021750
=>  Loading section .fini, size 0x30 lma ffffffff88021798
=>  Loading section .ctors, size 0x8 lma ffffffff880217c8
=>  Loading section .dtors, size 0x8 lma ffffffff880217d0
=>  Loading section .rdata, size 0x4ef4 lma ffffffff880217e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880266d8
=>  Loading section .data, size 0x490 lma ffffffff880266f0
=>  Start address ffffffff88000004
=>  Transfer rate: 1268640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  55/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:50   W:0    | mipstx39/jmr3904: mrfs_fspermission.exe
Result: invalid   
Time: 0:00:00.252724 mrfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028620
=>  Loading section .init, size 0x48 lma ffffffff88028690
=>  Loading section .fini, size 0x30 lma ffffffff880286d8
=>  Loading section .ctors, size 0x8 lma ffffffff88028708
=>  Loading section .dtors, size 0x8 lma ffffffff88028710
=>  Loading section .rdata, size 0x55c8 lma ffffffff88028720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802dce8
=>  Loading section .data, size 0x5fc lma ffffffff8802dd00
=>  Start address ffffffff88000004
=>  Transfer rate: 1513376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  56/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:50   W:0    | mipstx39/jmr3904: mrfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.257807 mrfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x235d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880235d0
=>  Loading section .init, size 0x48 lma ffffffff88023640
=>  Loading section .fini, size 0x30 lma ffffffff88023688
=>  Loading section .ctors, size 0x8 lma ffffffff880236b8
=>  Loading section .dtors, size 0x8 lma ffffffff880236c0
=>  Loading section .rdata, size 0x51f0 lma ffffffff880236d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880288c0
=>  Loading section .data, size 0x490 lma ffffffff880288d8
=>  Start address ffffffff88000004
=>  Transfer rate: 1338112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  57/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:50   W:0    | mipstx39/jmr3904: mrfs_fsrename.exe
Result: invalid   
Time: 0:00:00.254966 mrfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2b370 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8802b370
=>  Loading section .init, size 0x48 lma ffffffff8802b3e0
=>  Loading section .fini, size 0x30 lma ffffffff8802b428
=>  Loading section .ctors, size 0x8 lma ffffffff8802b458
=>  Loading section .dtors, size 0x8 lma ffffffff8802b460
=>  Loading section .rdata, size 0x5c50 lma ffffffff8802b470
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880310c0
=>  Loading section .data, size 0x5fc lma ffffffff880310d8
=>  Start address ffffffff88000004
=>  Transfer rate: 1619552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  58/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:50   W:0    | mipstx39/jmr3904: mrfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.265871 mrfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x219d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880219d0
=>  Loading section .init, size 0x48 lma ffffffff88021a40
=>  Loading section .fini, size 0x30 lma ffffffff88021a88
=>  Loading section .ctors, size 0x8 lma ffffffff88021ab8
=>  Loading section .dtors, size 0x8 lma ffffffff88021ac0
=>  Loading section .rdata, size 0x4d88 lma ffffffff88021ad0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026858
=>  Loading section .data, size 0x490 lma ffffffff88026870
=>  Start address ffffffff88000004
=>  Transfer rate: 1271744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  59/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:56   W:0    | mipstx39/jmr3904: mrfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.257924 mrfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21130 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88021130
=>  Loading section .init, size 0x48 lma ffffffff880211a0
=>  Loading section .fini, size 0x30 lma ffffffff880211e8
=>  Loading section .ctors, size 0x8 lma ffffffff88021218
=>  Loading section .dtors, size 0x8 lma ffffffff88021220
=>  Loading section .rdata, size 0x4ecc lma ffffffff88021230
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026100
=>  Loading section .data, size 0x490 lma ffffffff88026118
=>  Start address ffffffff88000004
=>  Transfer rate: 1256672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  60/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:58   W:0    | mipstx39/jmr3904: mrfs_fstime.exe
Result: invalid   
Time: 0:00:00.252624 mrfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x221a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880221a0
=>  Loading section .init, size 0x48 lma ffffffff88022210
=>  Loading section .fini, size 0x30 lma ffffffff88022258
=>  Loading section .ctors, size 0x8 lma ffffffff88022288
=>  Loading section .dtors, size 0x8 lma ffffffff88022290
=>  Loading section .rdata, size 0x4e8c lma ffffffff880222a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027130
=>  Loading section .data, size 0x49c lma ffffffff88027148
=>  Start address ffffffff88000004
=>  Transfer rate: 1289920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/mrfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  61/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:58   W:0    | mipstx39/jmr3904: tftpfs.exe
Result: invalid   
Time: 0:00:00.265832 tftpfs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/fstests/tftpfs.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/fstests/tftpfs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x33d00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x1f0 lma ffffffff88033d00
=>  Loading section .init, size 0x48 lma ffffffff88033ef0
=>  Loading section .fini, size 0x30 lma ffffffff88033f38
=>  Loading section .ctors, size 0x8 lma ffffffff88033f68
=>  Loading section .dtors, size 0x8 lma ffffffff88033f70
=>  Loading section .rdata, size 0x60c8 lma ffffffff88033f80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8803a048
=>  Loading section .data, size 0xbbc lma ffffffff8803a060
=>  Start address ffffffff88000004
=>  Transfer rate: 1925280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/fstests/tftpfs.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  62/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:58   W:0    | mipstx39/jmr3904: block01.exe
Result: invalid   
Time: 0:00:00.253583 block01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x158e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880158e0
=>  Loading section .init, size 0x48 lma ffffffff88015950
=>  Loading section .fini, size 0x30 lma ffffffff88015998
=>  Loading section .ctors, size 0x8 lma ffffffff880159c8
=>  Loading section .dtors, size 0x8 lma ffffffff880159d0
=>  Loading section .rdata, size 0x1cc5 lma ffffffff880159e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880176a8
=>  Loading section .data, size 0x440 lma ffffffff880176c0
=>  Start address ffffffff88000004
=>  Transfer rate: 776104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  63/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:58   W:0    | mipstx39/jmr3904: block02.exe
Result: invalid   
Time: 0:00:00.291527 block02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x143c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880143c0
=>  Loading section .init, size 0x48 lma ffffffff88014430
=>  Loading section .fini, size 0x30 lma ffffffff88014478
=>  Loading section .ctors, size 0x8 lma ffffffff880144a8
=>  Loading section .dtors, size 0x8 lma ffffffff880144b0
=>  Loading section .rdata, size 0x1c7d lma ffffffff880144c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016140
=>  Loading section .data, size 0x430 lma ffffffff88016158
=>  Start address ffffffff88000004
=>  Transfer rate: 732136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  64/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:58   W:0    | mipstx39/jmr3904: block03.exe
Result: invalid   
Time: 0:00:00.263303 block03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14350 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014350
=>  Loading section .init, size 0x48 lma ffffffff880143c0
=>  Loading section .fini, size 0x30 lma ffffffff88014408
=>  Loading section .ctors, size 0x8 lma ffffffff88014438
=>  Loading section .dtors, size 0x8 lma ffffffff88014440
=>  Loading section .rdata, size 0x1c65 lma ffffffff88014450
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880160b8
=>  Loading section .data, size 0x430 lma ffffffff880160d0
=>  Start address ffffffff88000004
=>  Transfer rate: 731048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  65/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:58   W:0    | mipstx39/jmr3904: block04.exe
Result: invalid   
Time: 0:00:00.258258 block04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x142e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880142e0
=>  Loading section .init, size 0x48 lma ffffffff88014350
=>  Loading section .fini, size 0x30 lma ffffffff88014398
=>  Loading section .ctors, size 0x8 lma ffffffff880143c8
=>  Loading section .dtors, size 0x8 lma ffffffff880143d0
=>  Loading section .rdata, size 0x1bfd lma ffffffff880143e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015fe0
=>  Loading section .data, size 0x430 lma ffffffff88015ff8
=>  Start address ffffffff88000004
=>  Transfer rate: 729320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  66/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:58   W:0    | mipstx39/jmr3904: block05.exe
Result: invalid   
Time: 0:00:00.253393 block05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15640 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015640
=>  Loading section .init, size 0x48 lma ffffffff880156b0
=>  Loading section .fini, size 0x30 lma ffffffff880156f8
=>  Loading section .ctors, size 0x8 lma ffffffff88015728
=>  Loading section .dtors, size 0x8 lma ffffffff88015730
=>  Loading section .rdata, size 0x1c45 lma ffffffff88015740
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017388
=>  Loading section .data, size 0x440 lma ffffffff880173a0
=>  Start address ffffffff88000004
=>  Transfer rate: 769704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  67/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:60   W:0    | mipstx39/jmr3904: block06.exe
Result: invalid   
Time: 0:00:00.255954 block06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e670 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e670
=>  Loading section .init, size 0x48 lma ffffffff8801e6e0
=>  Loading section .fini, size 0x30 lma ffffffff8801e728
=>  Loading section .ctors, size 0x8 lma ffffffff8801e758
=>  Loading section .dtors, size 0x8 lma ffffffff8801e760
=>  Loading section .rdata, size 0x2dd0 lma ffffffff8801e770
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021540
=>  Loading section .data, size 0x5dc lma ffffffff88021558
=>  Start address ffffffff88000004
=>  Transfer rate: 1104224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  68/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:60   W:0    | mipstx39/jmr3904: block07.exe
Result: invalid   
Time: 0:00:00.274005 block07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14770 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014770
=>  Loading section .init, size 0x48 lma ffffffff880147e0
=>  Loading section .fini, size 0x30 lma ffffffff88014828
=>  Loading section .ctors, size 0x8 lma ffffffff88014858
=>  Loading section .dtors, size 0x8 lma ffffffff88014860
=>  Loading section .rdata, size 0x1cd9 lma ffffffff88014870
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016550
=>  Loading section .data, size 0x430 lma ffffffff88016568
=>  Start address ffffffff88000004
=>  Transfer rate: 740424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  69/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:66   W:0    | mipstx39/jmr3904: block08.exe
Result: invalid   
Time: 0:00:00.275447 block08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c040 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801c040
=>  Loading section .init, size 0x48 lma ffffffff8801c0c0
=>  Loading section .fini, size 0x30 lma ffffffff8801c108
=>  Loading section .ctors, size 0x8 lma ffffffff8801c138
=>  Loading section .dtors, size 0x8 lma ffffffff8801c140
=>  Loading section .rdata, size 0x2541 lma ffffffff8801c150
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e698
=>  Loading section .data, size 0x4d8 lma ffffffff8801e6b0
=>  Start address ffffffff88000004
=>  Transfer rate: 1006536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  70/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:67   W:0    | mipstx39/jmr3904: block09.exe
Result: invalid   
Time: 0:00:00.260596 block09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14d30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014d30
=>  Loading section .init, size 0x48 lma ffffffff88014da0
=>  Loading section .fini, size 0x30 lma ffffffff88014de8
=>  Loading section .ctors, size 0x8 lma ffffffff88014e18
=>  Loading section .dtors, size 0x8 lma ffffffff88014e20
=>  Loading section .rdata, size 0x1c05 lma ffffffff88014e30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016a38
=>  Loading section .data, size 0x440 lma ffffffff88016a50
=>  Start address ffffffff88000004
=>  Transfer rate: 750632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  71/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:68   W:0    | mipstx39/jmr3904: block10.exe
Result: invalid   
Time: 0:00:00.261451 block10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15730 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015730
=>  Loading section .init, size 0x48 lma ffffffff880157a0
=>  Loading section .fini, size 0x30 lma ffffffff880157e8
=>  Loading section .ctors, size 0x8 lma ffffffff88015818
=>  Loading section .dtors, size 0x8 lma ffffffff88015820
=>  Loading section .rdata, size 0x1e2d lma ffffffff88015830
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017660
=>  Loading section .data, size 0x440 lma ffffffff88017678
=>  Start address ffffffff88000004
=>  Transfer rate: 775528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  72/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:68   W:0    | mipstx39/jmr3904: block11.exe
Result: invalid   
Time: 0:00:00.297496 block11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16190 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016190
=>  Loading section .init, size 0x48 lma ffffffff88016200
=>  Loading section .fini, size 0x30 lma ffffffff88016248
=>  Loading section .ctors, size 0x8 lma ffffffff88016278
=>  Loading section .dtors, size 0x8 lma ffffffff88016280
=>  Loading section .rdata, size 0x1e0d lma ffffffff88016290
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880180a0
=>  Loading section .data, size 0x458 lma ffffffff880180b8
=>  Start address ffffffff88000004
=>  Transfer rate: 796712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  73/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:68   W:0    | mipstx39/jmr3904: block12.exe
Result: invalid   
Time: 0:00:00.286995 block12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880147a0
=>  Loading section .init, size 0x48 lma ffffffff88014810
=>  Loading section .fini, size 0x30 lma ffffffff88014858
=>  Loading section .ctors, size 0x8 lma ffffffff88014888
=>  Loading section .dtors, size 0x8 lma ffffffff88014890
=>  Loading section .rdata, size 0x1c35 lma ffffffff880148a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880164d8
=>  Loading section .data, size 0x478 lma ffffffff880164f0
=>  Start address ffffffff88000004
=>  Transfer rate: 740072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  74/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:68   W:0    | mipstx39/jmr3904: block13.exe
Result: invalid   
Time: 0:00:00.262847 block13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x148c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880148c0
=>  Loading section .init, size 0x48 lma ffffffff88014930
=>  Loading section .fini, size 0x30 lma ffffffff88014978
=>  Loading section .ctors, size 0x8 lma ffffffff880149a8
=>  Loading section .dtors, size 0x8 lma ffffffff880149b0
=>  Loading section .rdata, size 0x2179 lma ffffffff880149c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016b40
=>  Loading section .data, size 0x440 lma ffffffff88016b58
=>  Start address ffffffff88000004
=>  Transfer rate: 752712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  75/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:70   W:0    | mipstx39/jmr3904: block14.exe
Result: invalid   
Time: 0:00:00.253535 block14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14b60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014b60
=>  Loading section .init, size 0x48 lma ffffffff88014bd0
=>  Loading section .fini, size 0x30 lma ffffffff88014c18
=>  Loading section .ctors, size 0x8 lma ffffffff88014c48
=>  Loading section .dtors, size 0x8 lma ffffffff88014c50
=>  Loading section .rdata, size 0x25c9 lma ffffffff88014c60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017230
=>  Loading section .data, size 0x440 lma ffffffff88017248
=>  Start address ffffffff88000004
=>  Transfer rate: 766920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  76/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:70   W:0    | mipstx39/jmr3904: block15.exe
Result: invalid   
Time: 0:00:00.255297 block15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014920
=>  Loading section .init, size 0x48 lma ffffffff88014990
=>  Loading section .fini, size 0x30 lma ffffffff880149d8
=>  Loading section .ctors, size 0x8 lma ffffffff88014a08
=>  Loading section .dtors, size 0x8 lma ffffffff88014a10
=>  Loading section .rdata, size 0x1d01 lma ffffffff88014a20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016728
=>  Loading section .data, size 0x440 lma ffffffff88016740
=>  Start address ffffffff88000004
=>  Transfer rate: 744328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  77/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:70   W:0    | mipstx39/jmr3904: block16.exe
Result: invalid   
Time: 0:00:00.253905 block16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ba0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014ba0
=>  Loading section .init, size 0x48 lma ffffffff88014c10
=>  Loading section .fini, size 0x30 lma ffffffff88014c58
=>  Loading section .ctors, size 0x8 lma ffffffff88014c88
=>  Loading section .dtors, size 0x8 lma ffffffff88014c90
=>  Loading section .rdata, size 0x1cb1 lma ffffffff88014ca0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016958
=>  Loading section .data, size 0x440 lma ffffffff88016970
=>  Start address ffffffff88000004
=>  Transfer rate: 748808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  78/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:71   W:0    | mipstx39/jmr3904: block17.exe
Result: invalid   
Time: 0:00:00.313285 block17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14010 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014010
=>  Loading section .init, size 0x48 lma ffffffff88014080
=>  Loading section .fini, size 0x30 lma ffffffff880140c8
=>  Loading section .ctors, size 0x8 lma ffffffff880140f8
=>  Loading section .dtors, size 0x8 lma ffffffff88014100
=>  Loading section .rdata, size 0x1b59 lma ffffffff88014110
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015c70
=>  Loading section .data, size 0x440 lma ffffffff88015c88
=>  Start address ffffffff88000004
=>  Transfer rate: 722376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/block17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  79/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:74   W:0    | mipstx39/jmr3904: bspcmdline01.exe
Result: invalid   
Time: 0:00:00.293034 bspcmdline01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010150
=>  Loading section .init, size 0x48 lma ffffffff880101c0
=>  Loading section .fini, size 0x30 lma ffffffff88010208
=>  Loading section .ctors, size 0x8 lma ffffffff88010238
=>  Loading section .dtors, size 0x8 lma ffffffff88010240
=>  Loading section .rdata, size 0x1f49 lma ffffffff88010250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121a0
=>  Loading section .data, size 0x408 lma ffffffff880121b8
=>  Start address ffffffff88000004
=>  Transfer rate: 601480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/bspcmdline01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  80/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:74   W:0    | mipstx39/jmr3904: capture01.exe
Result: invalid   
Time: 0:00:00.285540 capture01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e140 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801e140
=>  Loading section .init, size 0x48 lma ffffffff8801e1c0
=>  Loading section .fini, size 0x30 lma ffffffff8801e208
=>  Loading section .ctors, size 0x8 lma ffffffff8801e238
=>  Loading section .dtors, size 0x8 lma ffffffff8801e240
=>  Loading section .rdata, size 0x2818 lma ffffffff8801e250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020a68
=>  Loading section .data, size 0x618 lma ffffffff88020a80
=>  Start address ffffffff88000004
=>  Transfer rate: 1082496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/capture01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  81/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:74   W:0    | mipstx39/jmr3904: complex.exe
Result: invalid   
Time: 0:00:00.274558 complex.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24ea0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88024ea0
=>  Loading section .init, size 0x48 lma ffffffff88024f10
=>  Loading section .fini, size 0x30 lma ffffffff88024f58
=>  Loading section .ctors, size 0x8 lma ffffffff88024f88
=>  Loading section .dtors, size 0x8 lma ffffffff88024f90
=>  Loading section .rdata, size 0x2f58 lma ffffffff88024fa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88027ef8
=>  Loading section .data, size 0x5c0 lma ffffffff88027f10
=>  Start address ffffffff88000004
=>  Transfer rate: 1320512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/complex.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  82/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:74   W:0    | mipstx39/jmr3904: cpuuse.exe
Result: invalid   
Time: 0:00:00.308766 cpuuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012790
=>  Loading section .init, size 0x48 lma ffffffff88012800
=>  Loading section .fini, size 0x30 lma ffffffff88012848
=>  Loading section .ctors, size 0x8 lma ffffffff88012878
=>  Loading section .dtors, size 0x8 lma ffffffff88012880
=>  Loading section .rdata, size 0x2504 lma ffffffff88012890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d98
=>  Loading section .data, size 0x610 lma ffffffff88014db0
=>  Start address ffffffff88000004
=>  Transfer rate: 695712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/cpuuse.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  83/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:79   W:0    | mipstx39/jmr3904: crypt01.exe
Result: invalid   
Time: 0:00:00.253631 crypt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d8b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801d8b0
=>  Loading section .init, size 0x48 lma ffffffff8801d920
=>  Loading section .fini, size 0x30 lma ffffffff8801d968
=>  Loading section .ctors, size 0x8 lma ffffffff8801d998
=>  Loading section .dtors, size 0x8 lma ffffffff8801d9a0
=>  Loading section .rdata, size 0x30c8 lma ffffffff8801d9b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020a78
=>  Loading section .data, size 0x5e4 lma ffffffff88020a90
=>  Start address ffffffff88000004
=>  Transfer rate: 1082208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/crypt01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  84/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:80   W:0    | mipstx39/jmr3904: defaultconfig01.exe
Result: invalid   
Time: 0:00:00.268219 defaultconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14570 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014570
=>  Loading section .init, size 0x48 lma ffffffff880145f0
=>  Loading section .fini, size 0x30 lma ffffffff88014638
=>  Loading section .ctors, size 0x8 lma ffffffff88014668
=>  Loading section .dtors, size 0x8 lma ffffffff88014670
=>  Loading section .rdata, size 0x1cb0 lma ffffffff88014680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016330
=>  Loading section .data, size 0x5b0 lma ffffffff88016348
=>  Start address ffffffff88000004
=>  Transfer rate: 739200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/defaultconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  85/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:81   W:0    | mipstx39/jmr3904: devfs01.exe
Result: invalid   
Time: 0:00:00.255081 devfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xc4d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800c4d0
=>  Loading section .init, size 0x48 lma ffffffff8800c540
=>  Loading section .fini, size 0x30 lma ffffffff8800c588
=>  Loading section .ctors, size 0x8 lma ffffffff8800c5b8
=>  Loading section .dtors, size 0x8 lma ffffffff8800c5c0
=>  Loading section .rdata, size 0x1879 lma ffffffff8800c5d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800de50
=>  Loading section .data, size 0x408 lma ffffffff8800de68
=>  Start address ffffffff88000004
=>  Transfer rate: 463624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  86/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:81   W:0    | mipstx39/jmr3904: devfs04.exe
Result: invalid   
Time: 0:00:00.300623 devfs04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xd210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800d210
=>  Loading section .init, size 0x48 lma ffffffff8800d280
=>  Loading section .fini, size 0x30 lma ffffffff8800d2c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800d2f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800d300
=>  Loading section .rdata, size 0x1a4d lma ffffffff8800d310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800ed60
=>  Loading section .data, size 0x3ec lma ffffffff8800ed78
=>  Start address ffffffff88000004
=>  Transfer rate: 494280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devfs04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  87/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:82   W:0    | mipstx39/jmr3904: deviceio01.exe
Result: invalid   
Time: 0:00:00.251568 deviceio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103e0
=>  Loading section .init, size 0x48 lma ffffffff88010450
=>  Loading section .fini, size 0x30 lma ffffffff88010498
=>  Loading section .ctors, size 0x8 lma ffffffff880104c8
=>  Loading section .dtors, size 0x8 lma ffffffff880104d0
=>  Loading section .rdata, size 0x1b15 lma ffffffff880104e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ff8
=>  Loading section .data, size 0x430 lma ffffffff88012010
=>  Start address ffffffff88000004
=>  Transfer rate: 598440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/deviceio01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  88/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:82   W:0    | mipstx39/jmr3904: devnullfatal01.exe
Result: invalid   
Time: 0:00:00.258195 devnullfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ffd0
=>  Loading section .init, size 0x48 lma ffffffff88010040
=>  Loading section .fini, size 0x30 lma ffffffff88010088
=>  Loading section .ctors, size 0x8 lma ffffffff880100b8
=>  Loading section .dtors, size 0x8 lma ffffffff880100c0
=>  Loading section .rdata, size 0x1ef1 lma ffffffff880100d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fc8
=>  Loading section .data, size 0x418 lma ffffffff88011fe0
=>  Start address ffffffff88000004
=>  Transfer rate: 597832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/devnullfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  89/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:82   W:0    | mipstx39/jmr3904: dl01.exe
Result: invalid   
Time: 0:00:00.293711 dl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x278c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880278c0
=>  Loading section .init, size 0x48 lma ffffffff88027930
=>  Loading section .fini, size 0x30 lma ffffffff88027978
=>  Loading section .ctors, size 0x8 lma ffffffff880279a8
=>  Loading section .dtors, size 0x8 lma ffffffff880279b0
=>  Loading section .rdata, size 0xc0e0 lma ffffffff880279c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033aa0
=>  Loading section .data, size 0x604 lma ffffffff88033ac0
=>  Start address ffffffff88000004
=>  Transfer rate: 1705376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  90/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:85   W:0    | mipstx39/jmr3904: dl02.exe
Result: invalid   
Time: 0:00:00.255372 dl02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027920
=>  Loading section .init, size 0x48 lma ffffffff88027990
=>  Loading section .fini, size 0x30 lma ffffffff880279d8
=>  Loading section .ctors, size 0x8 lma ffffffff88027a08
=>  Loading section .dtors, size 0x8 lma ffffffff88027a10
=>  Loading section .rdata, size 0xc0b0 lma ffffffff88027a20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033ad0
=>  Loading section .data, size 0x5f4 lma ffffffff88033af0
=>  Start address ffffffff88000004
=>  Transfer rate: 1705632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  91/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:85   W:0    | mipstx39/jmr3904: dl03.exe
Result: invalid   
Time: 0:00:00.262283 dl03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b2b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801b2b0
=>  Loading section .init, size 0x48 lma ffffffff8801b320
=>  Loading section .fini, size 0x30 lma ffffffff8801b368
=>  Loading section .ctors, size 0x8 lma ffffffff8801b398
=>  Loading section .dtors, size 0x8 lma ffffffff8801b3a0
=>  Loading section .rdata, size 0x2d38 lma ffffffff8801b3b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e0e8
=>  Loading section .data, size 0x62c lma ffffffff8801e100
=>  Start address ffffffff88000004
=>  Transfer rate: 997664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  92/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:85   W:0    | mipstx39/jmr3904: dl04.exe
Result: invalid   
Time: 0:00:00.297265 dl04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27360 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027360
=>  Loading section .init, size 0x48 lma ffffffff880273d0
=>  Loading section .fini, size 0x30 lma ffffffff88027418
=>  Loading section .ctors, size 0x8 lma ffffffff88027448
=>  Loading section .dtors, size 0x8 lma ffffffff88027450
=>  Loading section .rdata, size 0xbfa8 lma ffffffff88027460
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88033408
=>  Loading section .data, size 0x5e4 lma ffffffff88033420
=>  Start address ffffffff88000004
=>  Transfer rate: 1691616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  93/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:85   W:0    | mipstx39/jmr3904: dl05.exe
Result: invalid   
Time: 0:00:00.253808 dl05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x3bf4c lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x84 lma ffffffff8803bf4c
=>  Loading section .init, size 0x48 lma ffffffff8803bfd0
=>  Loading section .fini, size 0x30 lma ffffffff8803c018
=>  Loading section .ctors, size 0x18 lma ffffffff8803c048
=>  Loading section .dtors, size 0x8 lma ffffffff8803c060
=>  Loading section .rdata, size 0xfa6c lma ffffffff8803c070
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8804bae0
=>  Loading section .rel.dyn, size 0x18 lma ffffffff8804baf8
=>  Loading section .data, size 0x69c lma ffffffff8804bb10
=>  Loading section .sdata, size 0x4 lma ffffffff8804c1b0
=>  Start address ffffffff88000004
=>  Transfer rate: 2493728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  94/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:90   W:0    | mipstx39/jmr3904: dl06.exe
Result: invalid   
Time: 0:00:00.261080 dl06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x278a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880278a0
=>  Loading section .init, size 0x48 lma ffffffff88027910
=>  Loading section .fini, size 0x30 lma ffffffff88027958
=>  Loading section .ctors, size 0x8 lma ffffffff88027988
=>  Loading section .dtors, size 0x8 lma ffffffff88027990
=>  Loading section .rdata, size 0xe8b0 lma ffffffff880279a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88036250
=>  Loading section .data, size 0x5f4 lma ffffffff88036270
=>  Start address ffffffff88000004
=>  Transfer rate: 1786528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  95/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:92   W:0    | mipstx39/jmr3904: dl07.exe
Result: invalid   
Time: 0:00:00.253483 dl07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028790
=>  Loading section .init, size 0x48 lma ffffffff88028800
=>  Loading section .fini, size 0x30 lma ffffffff88028848
=>  Loading section .ctors, size 0x8 lma ffffffff88028878
=>  Loading section .dtors, size 0x8 lma ffffffff88028880
=>  Loading section .rdata, size 0x112a0 lma ffffffff88028890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88039b30
=>  Loading section .data, size 0x5e4 lma ffffffff88039b50
=>  Start address ffffffff88000004
=>  Transfer rate: 1902880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  96/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:92   W:0    | mipstx39/jmr3904: dl08.exe
Result: invalid   
Time: 0:00:00.285426 dl08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x283c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880283c0
=>  Loading section .init, size 0x48 lma ffffffff88028430
=>  Loading section .fini, size 0x30 lma ffffffff88028478
=>  Loading section .ctors, size 0x8 lma ffffffff880284a8
=>  Loading section .dtors, size 0x8 lma ffffffff880284b0
=>  Loading section .rdata, size 0x111a0 lma ffffffff880284c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88039660
=>  Loading section .data, size 0x5e4 lma ffffffff88039680
=>  Start address ffffffff88000004
=>  Transfer rate: 1893024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  97/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:93   W:0    | mipstx39/jmr3904: dl09.exe
Result: invalid   
Time: 0:00:00.297674 dl09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28770 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88028770
=>  Loading section .init, size 0x48 lma ffffffff880287e0
=>  Loading section .fini, size 0x30 lma ffffffff88028828
=>  Loading section .ctors, size 0x8 lma ffffffff88028858
=>  Loading section .dtors, size 0x8 lma ffffffff88028860
=>  Loading section .rdata, size 0x11270 lma ffffffff88028870
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88039ae0
=>  Loading section .data, size 0x5e4 lma ffffffff88039b00
=>  Start address ffffffff88000004
=>  Transfer rate: 1902240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  98/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:92   W:0    | mipstx39/jmr3904: dl10.exe
Result: invalid   
Time: 0:00:00.515066 dl10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x7a3e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8807a3e0
=>  Loading section .init, size 0x48 lma ffffffff8807a460
=>  Loading section .fini, size 0x30 lma ffffffff8807a4a8
=>  Loading section .ctors, size 0x8 lma ffffffff8807a4d8
=>  Loading section .dtors, size 0x8 lma ffffffff8807a4e0
=>  Loading section .rdata, size 0x216f0 lma ffffffff8807a4f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8809bbe0
=>  Loading section .data, size 0x1808 lma ffffffff8809bc00
=>  Start address ffffffff88000004
=>  Transfer rate: 5152704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dl10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[  99/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:92   W:0    | mipstx39/jmr3904: dumpbuf01.exe
Result: invalid   
Time: 0:00:00.259286 dumpbuf01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe90
=>  Loading section .init, size 0x48 lma ffffffff8800ff00
=>  Loading section .fini, size 0x30 lma ffffffff8800ff48
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff78
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff80
=>  Loading section .rdata, size 0x1b10 lma ffffffff8800ff90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011aa0
=>  Loading section .data, size 0x440 lma ffffffff88011ab8
=>  Start address ffffffff88000004
=>  Transfer rate: 587648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/dumpbuf01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 100/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:93   W:0    | mipstx39/jmr3904: exit01.exe
Result: invalid   
Time: 0:00:00.268233 exit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010070
=>  Loading section .init, size 0x48 lma ffffffff880100e0
=>  Loading section .fini, size 0x30 lma ffffffff88010128
=>  Loading section .ctors, size 0x8 lma ffffffff88010158
=>  Loading section .dtors, size 0x8 lma ffffffff88010160
=>  Loading section .rdata, size 0x1a95 lma ffffffff88010170
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c08
=>  Loading section .data, size 0x418 lma ffffffff88011c20
=>  Start address ffffffff88000004
=>  Transfer rate: 590184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 101/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:95   W:0    | mipstx39/jmr3904: exit02.exe
Result: invalid   
Time: 0:00:00.258518 exit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd60
=>  Loading section .init, size 0x48 lma ffffffff8800fdd0
=>  Loading section .fini, size 0x30 lma ffffffff8800fe18
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe48
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe50
=>  Loading section .rdata, size 0x1a55 lma ffffffff8800fe60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118b8
=>  Loading section .data, size 0x418 lma ffffffff880118d0
=>  Start address ffffffff88000004
=>  Transfer rate: 583400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 102/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:95   W:0    | mipstx39/jmr3904: exit03.exe
Result: invalid   
Time: 0:00:00.521140 exit03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x96748 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x78 lma ffffffff88096748
=>  Loading section .init, size 0x48 lma ffffffff880967c0
=>  Loading section .fini, size 0x30 lma ffffffff88096808
=>  Loading section .ctors, size 0x34 lma ffffffff88096838
=>  Loading section .dtors, size 0x8 lma ffffffff8809686c
=>  Loading section .rdata, size 0xa434 lma ffffffff88096880
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a0cb8
=>  Loading section .rel.dyn, size 0x20 lma ffffffff880a0cd0
=>  Loading section .data, size 0x730 lma ffffffff880a0cf0
=>  Loading section .sdata, size 0x4 lma ffffffff880a1420
=>  Start address ffffffff88000004
=>  Transfer rate: 5284000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/exit03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 103/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:95   W:0    | mipstx39/jmr3904: flashdisk01.exe
Result: invalid   
Time: 0:00:00.259574 flashdisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x30060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88030060
=>  Loading section .init, size 0x48 lma ffffffff880300d0
=>  Loading section .fini, size 0x30 lma ffffffff88030118
=>  Loading section .ctors, size 0x8 lma ffffffff88030148
=>  Loading section .dtors, size 0x8 lma ffffffff88030150
=>  Loading section .rdata, size 0x62ec lma ffffffff88030160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88036450
=>  Loading section .data, size 0x5d0 lma ffffffff88036468
=>  Start address ffffffff88000004
=>  Transfer rate: 1790304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/flashdisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 104/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:100  W:0    | mipstx39/jmr3904: getentropy01.exe
Result: invalid   
Time: 0:00:00.259212 getentropy01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf4a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f4a0
=>  Loading section .init, size 0x48 lma ffffffff8800f510
=>  Loading section .fini, size 0x30 lma ffffffff8800f558
=>  Loading section .ctors, size 0x8 lma ffffffff8800f588
=>  Loading section .dtors, size 0x8 lma ffffffff8800f590
=>  Loading section .rdata, size 0x1a0d lma ffffffff8800f5a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010fb0
=>  Loading section .data, size 0x408 lma ffffffff88010fc8
=>  Start address ffffffff88000004
=>  Transfer rate: 564776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/getentropy01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 105/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:102  W:0    | mipstx39/jmr3904: heapwalk.exe
Result: invalid   
Time: 0:00:00.256523 heapwalk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109f0
=>  Loading section .init, size 0x48 lma ffffffff88010a60
=>  Loading section .fini, size 0x30 lma ffffffff88010aa8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ad8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ae0
=>  Loading section .rdata, size 0x2415 lma ffffffff88010af0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f08
=>  Loading section .data, size 0x418 lma ffffffff88012f20
=>  Start address ffffffff88000004
=>  Transfer rate: 629096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/heapwalk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 106/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:102  W:0    | mipstx39/jmr3904: i2c01.exe
Result: invalid   
Time: 0:00:00.274157 i2c01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14f50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014f50
=>  Loading section .init, size 0x48 lma ffffffff88014fc0
=>  Loading section .fini, size 0x30 lma ffffffff88015008
=>  Loading section .ctors, size 0x8 lma ffffffff88015038
=>  Loading section .dtors, size 0x8 lma ffffffff88015040
=>  Loading section .rdata, size 0x1fc9 lma ffffffff88015050
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017020
=>  Loading section .data, size 0x448 lma ffffffff88017038
=>  Start address ffffffff88000004
=>  Transfer rate: 762760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/i2c01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 107/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:102  W:0    | mipstx39/jmr3904: irqs01.exe
Result: invalid   
Time: 0:00:00.276928 irqs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x157d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff880157d0
=>  Loading section .init, size 0x48 lma ffffffff88015860
=>  Loading section .fini, size 0x30 lma ffffffff880158a8
=>  Loading section .ctors, size 0x8 lma ffffffff880158d8
=>  Loading section .dtors, size 0x8 lma ffffffff880158e0
=>  Loading section .rdata, size 0x25cc lma ffffffff880158f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017ec0
=>  Loading section .data, size 0x490 lma ffffffff88017ed8
=>  Start address ffffffff88000004
=>  Transfer rate: 793312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/irqs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 108/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:102  W:0    | mipstx39/jmr3904: libfdt01.exe
Result: invalid   
Time: 0:00:00.282525 libfdt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011580
=>  Loading section .init, size 0x48 lma ffffffff880115f0
=>  Loading section .fini, size 0x30 lma ffffffff88011638
=>  Loading section .ctors, size 0x8 lma ffffffff88011668
=>  Loading section .dtors, size 0x8 lma ffffffff88011670
=>  Loading section .rdata, size 0x1dcd lma ffffffff88011680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013450
=>  Loading section .data, size 0x418 lma ffffffff88013468
=>  Start address ffffffff88000004
=>  Transfer rate: 639912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/libfdt01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 109/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:103  W:0    | mipstx39/jmr3904: malloc02.exe
Result: invalid   
Time: 0:00:00.259086 malloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010210
=>  Loading section .init, size 0x48 lma ffffffff88010280
=>  Loading section .fini, size 0x30 lma ffffffff880102c8
=>  Loading section .ctors, size 0x8 lma ffffffff880102f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010300
=>  Loading section .rdata, size 0x1e89 lma ffffffff88010310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121a0
=>  Loading section .data, size 0x448 lma ffffffff880121b8
=>  Start address ffffffff88000004
=>  Transfer rate: 601992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 110/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:103  W:0    | mipstx39/jmr3904: malloc03.exe
Result: invalid   
Time: 0:00:00.306721 malloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf000 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f000
=>  Loading section .init, size 0x48 lma ffffffff8800f070
=>  Loading section .fini, size 0x30 lma ffffffff8800f0b8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f0e8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f0f0
=>  Loading section .rdata, size 0x19b9 lma ffffffff8800f100
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ac0
=>  Loading section .data, size 0x408 lma ffffffff88010ad8
=>  Start address ffffffff88000004
=>  Transfer rate: 554632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 111/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:104  W:0    | mipstx39/jmr3904: malloc04.exe
Result: invalid   
Time: 0:00:00.251730 malloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10760 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010760
=>  Loading section .init, size 0x48 lma ffffffff880107d0
=>  Loading section .fini, size 0x30 lma ffffffff88010818
=>  Loading section .ctors, size 0x8 lma ffffffff88010848
=>  Loading section .dtors, size 0x8 lma ffffffff88010850
=>  Loading section .rdata, size 0x1a89 lma ffffffff88010860
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122f0
=>  Loading section .data, size 0x418 lma ffffffff88012308
=>  Start address ffffffff88000004
=>  Transfer rate: 604296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 112/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:109  W:0    | mipstx39/jmr3904: malloctest.exe
Result: invalid   
Time: 0:00:00.255153 malloctest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16840 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016840
=>  Loading section .init, size 0x48 lma ffffffff880168b0
=>  Loading section .fini, size 0x30 lma ffffffff880168f8
=>  Loading section .ctors, size 0x8 lma ffffffff88016928
=>  Loading section .dtors, size 0x8 lma ffffffff88016930
=>  Loading section .rdata, size 0x40a4 lma ffffffff88016940
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a9e8
=>  Loading section .data, size 0x5f0 lma ffffffff8801aa00
=>  Start address ffffffff88000004
=>  Transfer rate: 884512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/malloctest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 113/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:111  W:0    | mipstx39/jmr3904: math.exe
Result: invalid   
Time: 0:00:00.256161 math.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027400
=>  Loading section .init, size 0x48 lma ffffffff88027470
=>  Loading section .fini, size 0x30 lma ffffffff880274b8
=>  Loading section .ctors, size 0x8 lma ffffffff880274e8
=>  Loading section .dtors, size 0x8 lma ffffffff880274f0
=>  Loading section .rdata, size 0x3968 lma ffffffff88027500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802ae68
=>  Loading section .data, size 0x5d0 lma ffffffff8802ae80
=>  Start address ffffffff88000004
=>  Transfer rate: 1417792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/math.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 114/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:110  W:0    | mipstx39/jmr3904: mathf.exe
Result: invalid   
Time: 0:00:00.295809 mathf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88023930
=>  Loading section .init, size 0x48 lma ffffffff880239a0
=>  Loading section .fini, size 0x30 lma ffffffff880239e8
=>  Loading section .ctors, size 0x8 lma ffffffff88023a18
=>  Loading section .dtors, size 0x8 lma ffffffff88023a20
=>  Loading section .rdata, size 0x32d8 lma ffffffff88023a30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88026d08
=>  Loading section .data, size 0x5b8 lma ffffffff88026d20
=>  Start address ffffffff88000004
=>  Transfer rate: 1283712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathf.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 115/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:111  W:0    | mipstx39/jmr3904: mathl.exe
Result: invalid   
Time: 0:00:00.253741 mathl.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17780 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017780
=>  Loading section .init, size 0x48 lma ffffffff880177f0
=>  Loading section .fini, size 0x30 lma ffffffff88017838
=>  Loading section .ctors, size 0x8 lma ffffffff88017868
=>  Loading section .dtors, size 0x8 lma ffffffff88017870
=>  Loading section .rdata, size 0x1fb8 lma ffffffff88017880
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019838
=>  Loading section .data, size 0x5a8 lma ffffffff88019850
=>  Start address ffffffff88000004
=>  Transfer rate: 847744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mathl.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 116/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:110  W:0    | mipstx39/jmr3904: md501.exe
Result: invalid   
Time: 0:00:00.274806 md501.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10df0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010df0
=>  Loading section .init, size 0x48 lma ffffffff88010e60
=>  Loading section .fini, size 0x30 lma ffffffff88010ea8
=>  Loading section .ctors, size 0x8 lma ffffffff88010ed8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ee0
=>  Loading section .rdata, size 0x1c7d lma ffffffff88010ef0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b70
=>  Loading section .data, size 0x458 lma ffffffff88012b88
=>  Start address ffffffff88000004
=>  Transfer rate: 622248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/md501.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 117/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:110  W:0    | mipstx39/jmr3904: monitor.exe
Result: invalid   
Time: 0:00:00.251879 monitor.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88027690
=>  Loading section .init, size 0x48 lma ffffffff88027700
=>  Loading section .fini, size 0x30 lma ffffffff88027748
=>  Loading section .ctors, size 0x8 lma ffffffff88027778
=>  Loading section .dtors, size 0x8 lma ffffffff88027780
=>  Loading section .rdata, size 0x4928 lma ffffffff88027790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802c0b8
=>  Loading section .data, size 0x7c8 lma ffffffff8802c0d0
=>  Start address ffffffff88000004
=>  Transfer rate: 1459328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 118/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:112  W:0    | mipstx39/jmr3904: monitor02.exe
Result: invalid   
Time: 0:00:00.261838 monitor02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x200f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880200f0
=>  Loading section .init, size 0x48 lma ffffffff88020170
=>  Loading section .fini, size 0x30 lma ffffffff880201b8
=>  Loading section .ctors, size 0x8 lma ffffffff880201e8
=>  Loading section .dtors, size 0x8 lma ffffffff880201f0
=>  Loading section .rdata, size 0x3744 lma ffffffff88020200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023948
=>  Loading section .data, size 0x850 lma ffffffff88023960
=>  Start address ffffffff88000004
=>  Transfer rate: 1183008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/monitor02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 119/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:112  W:0    | mipstx39/jmr3904: mouse01.exe
Result: invalid   
Time: 0:00:00.264436 mouse01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c5c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801c5c0
=>  Loading section .init, size 0x48 lma ffffffff8801c640
=>  Loading section .fini, size 0x30 lma ffffffff8801c688
=>  Loading section .ctors, size 0x8 lma ffffffff8801c6b8
=>  Loading section .dtors, size 0x8 lma ffffffff8801c6c0
=>  Loading section .rdata, size 0x28fc lma ffffffff8801c6d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801efd0
=>  Loading section .data, size 0x648 lma ffffffff8801efe8
=>  Start address ffffffff88000004
=>  Transfer rate: 1028384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/mouse01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 120/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:113  W:0    | mipstx39/jmr3904: newlib01.exe
Result: invalid   
Time: 0:00:00.257539 newlib01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x151b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880151b0
=>  Loading section .init, size 0x48 lma ffffffff88015220
=>  Loading section .fini, size 0x30 lma ffffffff88015268
=>  Loading section .ctors, size 0x8 lma ffffffff88015298
=>  Loading section .dtors, size 0x8 lma ffffffff880152a0
=>  Loading section .rdata, size 0x1d61 lma ffffffff880152b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017018
=>  Loading section .data, size 0x458 lma ffffffff88017030
=>  Start address ffffffff88000004
=>  Transfer rate: 762824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/newlib01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 121/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:113  W:0    | mipstx39/jmr3904: ofw01.exe
Result: invalid   
Time: 0:00:00.255744 ofw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012950
=>  Loading section .init, size 0x48 lma ffffffff880129c0
=>  Loading section .fini, size 0x30 lma ffffffff88012a08
=>  Loading section .ctors, size 0x8 lma ffffffff88012a38
=>  Loading section .dtors, size 0x8 lma ffffffff88012a40
=>  Loading section .rdata, size 0x1fe1 lma ffffffff88012a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014a38
=>  Loading section .data, size 0x418 lma ffffffff88014a50
=>  Start address ffffffff88000004
=>  Transfer rate: 684744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ofw01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 122/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:120  W:0    | mipstx39/jmr3904: putenvtest.exe
Result: invalid   
Time: 0:00:00.288415 putenvtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10720 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010720
=>  Loading section .init, size 0x48 lma ffffffff88010790
=>  Loading section .fini, size 0x30 lma ffffffff880107d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010808
=>  Loading section .dtors, size 0x8 lma ffffffff88010810
=>  Loading section .rdata, size 0x19d1 lma ffffffff88010820
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121f8
=>  Loading section .data, size 0x41c lma ffffffff88012210
=>  Start address ffffffff88000004
=>  Transfer rate: 602344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/putenvtest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 123/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:120  W:0    | mipstx39/jmr3904: pwdgrp01.exe
Result: invalid   
Time: 0:00:00.272360 pwdgrp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14090 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014090
=>  Loading section .init, size 0x48 lma ffffffff88014100
=>  Loading section .fini, size 0x30 lma ffffffff88014148
=>  Loading section .ctors, size 0x8 lma ffffffff88014178
=>  Loading section .dtors, size 0x8 lma ffffffff88014180
=>  Loading section .rdata, size 0x1df0 lma ffffffff88014190
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015f80
=>  Loading section .data, size 0x4a0 lma ffffffff88015f98
=>  Start address ffffffff88000004
=>  Transfer rate: 729472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 124/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:121  W:0    | mipstx39/jmr3904: pwdgrp02.exe
Result: invalid   
Time: 0:00:00.271205 pwdgrp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012c50
=>  Loading section .init, size 0x48 lma ffffffff88012cc0
=>  Loading section .fini, size 0x30 lma ffffffff88012d08
=>  Loading section .ctors, size 0x8 lma ffffffff88012d38
=>  Loading section .dtors, size 0x8 lma ffffffff88012d40
=>  Loading section .rdata, size 0x1d68 lma ffffffff88012d50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ab8
=>  Loading section .data, size 0x438 lma ffffffff88014ad0
=>  Start address ffffffff88000004
=>  Transfer rate: 686080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/pwdgrp02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 125/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:121  W:0    | mipstx39/jmr3904: rbheap01.exe
Result: invalid   
Time: 0:00:00.268549 rbheap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f20
=>  Loading section .init, size 0x48 lma ffffffff88010f90
=>  Loading section .fini, size 0x30 lma ffffffff88010fd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011008
=>  Loading section .dtors, size 0x8 lma ffffffff88011010
=>  Loading section .rdata, size 0x1ccd lma ffffffff88011020
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cf0
=>  Loading section .data, size 0x418 lma ffffffff88012d08
=>  Start address ffffffff88000004
=>  Transfer rate: 624808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rbheap01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 126/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:121  W:0    | mipstx39/jmr3904: rcxx01.exe
Result: invalid   
Time: 0:00:00.522648 rcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9affc lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x84 lma ffffffff8809affc
=>  Loading section .init, size 0x48 lma ffffffff8809b080
=>  Loading section .fini, size 0x30 lma ffffffff8809b0c8
=>  Loading section .ctors, size 0x44 lma ffffffff8809b0f8
=>  Loading section .dtors, size 0x8 lma ffffffff8809b13c
=>  Loading section .rdata, size 0xab5c lma ffffffff8809b150
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880a5cb0
=>  Loading section .rel.dyn, size 0x18 lma ffffffff880a5cc8
=>  Loading section .data, size 0x7b0 lma ffffffff880a5ce0
=>  Loading section .sdata, size 0x4 lma ffffffff880a6490
=>  Start address ffffffff88000004
=>  Transfer rate: 5448736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 127/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:121  W:0    | mipstx39/jmr3904: record01.exe
Result: invalid   
Time: 0:00:00.273234 record01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10eb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010eb0
=>  Loading section .init, size 0x48 lma ffffffff88010f20
=>  Loading section .fini, size 0x30 lma ffffffff88010f68
=>  Loading section .ctors, size 0x8 lma ffffffff88010f98
=>  Loading section .dtors, size 0x8 lma ffffffff88010fa0
=>  Loading section .rdata, size 0x1eb5 lma ffffffff88010fb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e68
=>  Loading section .data, size 0x418 lma ffffffff88012e80
=>  Start address ffffffff88000004
=>  Transfer rate: 627816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 128/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:121  W:0    | mipstx39/jmr3904: record02.exe
Result: invalid   
Time: 0:00:00.265462 record02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18d60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88018d60
=>  Loading section .init, size 0x48 lma ffffffff88018de0
=>  Loading section .fini, size 0x30 lma ffffffff88018e28
=>  Loading section .ctors, size 0x8 lma ffffffff88018e58
=>  Loading section .dtors, size 0x8 lma ffffffff88018e60
=>  Loading section .rdata, size 0x8be9 lma ffffffff88018e70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021a60
=>  Loading section .data, size 0x450 lma ffffffff88021a78
=>  Start address ffffffff88000004
=>  Transfer rate: 1111496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/record02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 129/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:121  W:0    | mipstx39/jmr3904: rtmonuse.exe
Result: invalid   
Time: 0:00:00.264700 rtmonuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x120c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880120c0
=>  Loading section .init, size 0x48 lma ffffffff88012130
=>  Loading section .fini, size 0x30 lma ffffffff88012178
=>  Loading section .ctors, size 0x8 lma ffffffff880121a8
=>  Loading section .dtors, size 0x8 lma ffffffff880121b0
=>  Loading section .rdata, size 0x2318 lma ffffffff880121c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880144d8
=>  Loading section .data, size 0x490 lma ffffffff880144f0
=>  Start address ffffffff88000004
=>  Transfer rate: 674752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/rtmonuse.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 130/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:128  W:0    | mipstx39/jmr3904: sha.exe
Result: invalid   
Time: 0:00:00.275122 sha.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014c00
=>  Loading section .init, size 0x48 lma ffffffff88014c70
=>  Loading section .fini, size 0x30 lma ffffffff88014cb8
=>  Loading section .ctors, size 0x8 lma ffffffff88014ce8
=>  Loading section .dtors, size 0x8 lma ffffffff88014cf0
=>  Loading section .rdata, size 0x25e5 lma ffffffff88014d00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880172e8
=>  Loading section .data, size 0x408 lma ffffffff88017300
=>  Start address ffffffff88000004
=>  Transfer rate: 767976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sha.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 131/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:128  W:0    | mipstx39/jmr3904: shell01.exe
Result: invalid   
Time: 0:00:00.255910 shell01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x315f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880315f0
=>  Loading section .init, size 0x48 lma ffffffff88031670
=>  Loading section .fini, size 0x30 lma ffffffff880316b8
=>  Loading section .ctors, size 0x8 lma ffffffff880316e8
=>  Loading section .dtors, size 0x8 lma ffffffff880316f0
=>  Loading section .rdata, size 0x5ed8 lma ffffffff88031700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880375d8
=>  Loading section .data, size 0x948 lma ffffffff880375f0
=>  Start address ffffffff88000004
=>  Transfer rate: 1833344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/shell01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 132/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:128  W:0    | mipstx39/jmr3904: sparsedisk01.exe
Result: invalid   
Time: 0:00:00.293056 sparsedisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16600 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016600
=>  Loading section .init, size 0x48 lma ffffffff88016670
=>  Loading section .fini, size 0x30 lma ffffffff880166b8
=>  Loading section .ctors, size 0x8 lma ffffffff880166e8
=>  Loading section .dtors, size 0x8 lma ffffffff880166f0
=>  Loading section .rdata, size 0x1d39 lma ffffffff88016700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018440
=>  Loading section .data, size 0x440 lma ffffffff88018458
=>  Start address ffffffff88000004
=>  Transfer rate: 803912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/sparsedisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 133/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:128  W:0    | mipstx39/jmr3904: spi01.exe
Result: invalid   
Time: 0:00:00.262989 spi01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x116c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880116c0
=>  Loading section .init, size 0x48 lma ffffffff88011730
=>  Loading section .fini, size 0x30 lma ffffffff88011778
=>  Loading section .ctors, size 0x8 lma ffffffff880117a8
=>  Loading section .dtors, size 0x8 lma ffffffff880117b0
=>  Loading section .rdata, size 0x1c81 lma ffffffff880117c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013448
=>  Loading section .data, size 0x458 lma ffffffff88013460
=>  Start address ffffffff88000004
=>  Transfer rate: 640328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/spi01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 134/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:129  W:0    | mipstx39/jmr3904: stackchk.exe
Result: invalid   
Time: 0:00:00.255249 stackchk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011d70
=>  Loading section .init, size 0x48 lma ffffffff88011de0
=>  Loading section .fini, size 0x30 lma ffffffff88011e28
=>  Loading section .ctors, size 0x8 lma ffffffff88011e58
=>  Loading section .dtors, size 0x8 lma ffffffff88011e60
=>  Loading section .rdata, size 0x22e8 lma ffffffff88011e70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014158
=>  Loading section .data, size 0x5c0 lma ffffffff88014170
=>  Start address ffffffff88000004
=>  Transfer rate: 670016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 135/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:129  W:0    | mipstx39/jmr3904: stackchk01.exe
Result: invalid   
Time: 0:00:00.253558 stackchk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf3a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f3a0
=>  Loading section .init, size 0x48 lma ffffffff8800f410
=>  Loading section .fini, size 0x30 lma ffffffff8800f458
=>  Loading section .ctors, size 0x8 lma ffffffff8800f488
=>  Loading section .dtors, size 0x8 lma ffffffff8800f490
=>  Loading section .rdata, size 0x1ae1 lma ffffffff8800f4a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010f88
=>  Loading section .data, size 0x408 lma ffffffff88010fa0
=>  Start address ffffffff88000004
=>  Transfer rate: 564424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 136/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:129  W:0    | mipstx39/jmr3904: stackchk02.exe
Result: invalid   
Time: 0:00:00.270679 stackchk02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf290 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f290
=>  Loading section .init, size 0x48 lma ffffffff8800f300
=>  Loading section .fini, size 0x30 lma ffffffff8800f348
=>  Loading section .ctors, size 0x8 lma ffffffff8800f378
=>  Loading section .dtors, size 0x8 lma ffffffff8800f380
=>  Loading section .rdata, size 0x1a2d lma ffffffff8800f390
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010dc0
=>  Loading section .data, size 0x408 lma ffffffff88010dd8
=>  Start address ffffffff88000004
=>  Transfer rate: 560808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stackchk02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 137/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:129  W:0    | mipstx39/jmr3904: stringto01.exe
Result: invalid   
Time: 0:00:00.305113 stringto01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16a90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016a90
=>  Loading section .init, size 0x48 lma ffffffff88016b00
=>  Loading section .fini, size 0x30 lma ffffffff88016b48
=>  Loading section .ctors, size 0x8 lma ffffffff88016b78
=>  Loading section .dtors, size 0x8 lma ffffffff88016b80
=>  Loading section .rdata, size 0x3a18 lma ffffffff88016b90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a5a8
=>  Loading section .data, size 0x570 lma ffffffff8801a5c0
=>  Start address ffffffff88000004
=>  Transfer rate: 874816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/stringto01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 138/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:134  W:0    | mipstx39/jmr3904: tar01.exe
Result: invalid   
Time: 0:00:00.261450 tar01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15fb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015fb0
=>  Loading section .init, size 0x48 lma ffffffff88016020
=>  Loading section .fini, size 0x30 lma ffffffff88016068
=>  Loading section .ctors, size 0x8 lma ffffffff88016098
=>  Loading section .dtors, size 0x8 lma ffffffff880160a0
=>  Loading section .rdata, size 0x86f0 lma ffffffff880160b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e7a0
=>  Loading section .data, size 0x408 lma ffffffff8801e7c0
=>  Start address ffffffff88000004
=>  Transfer rate: 1007040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 139/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:135  W:0    | mipstx39/jmr3904: tar02.exe
Result: invalid   
Time: 0:00:00.251407 tar02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11350 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011350
=>  Loading section .init, size 0x48 lma ffffffff880113c0
=>  Loading section .fini, size 0x30 lma ffffffff88011408
=>  Loading section .ctors, size 0x8 lma ffffffff88011438
=>  Loading section .dtors, size 0x8 lma ffffffff88011440
=>  Loading section .rdata, size 0x52e4 lma ffffffff88011450
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016738
=>  Loading section .data, size 0x408 lma ffffffff88016750
=>  Start address ffffffff88000004
=>  Transfer rate: 744032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 140/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:136  W:0    | mipstx39/jmr3904: tar03.exe
Result: invalid   
Time: 0:00:00.253281 tar03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110f0
=>  Loading section .init, size 0x48 lma ffffffff88011160
=>  Loading section .fini, size 0x30 lma ffffffff880111a8
=>  Loading section .ctors, size 0x8 lma ffffffff880111d8
=>  Loading section .dtors, size 0x8 lma ffffffff880111e0
=>  Loading section .rdata, size 0x253c lma ffffffff880111f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013730
=>  Loading section .data, size 0x418 lma ffffffff88013748
=>  Start address ffffffff88000004
=>  Transfer rate: 645792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tar03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 141/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:136  W:0    | mipstx39/jmr3904: termios.exe
Result: invalid   
Time: 0:00:00.264036 termios.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24960 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88024960
=>  Loading section .init, size 0x48 lma ffffffff880249d0
=>  Loading section .fini, size 0x30 lma ffffffff88024a18
=>  Loading section .ctors, size 0x8 lma ffffffff88024a48
=>  Loading section .dtors, size 0x8 lma ffffffff88024a50
=>  Loading section .rdata, size 0x446c lma ffffffff88024a60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028ed0
=>  Loading section .data, size 0x598 lma ffffffff88028ee8
=>  Start address ffffffff88000004
=>  Transfer rate: 1352608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 142/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:136  W:0    | mipstx39/jmr3904: termios01.exe
Result: invalid   
Time: 0:00:00.285498 termios01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x172a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880172a0
=>  Loading section .init, size 0x48 lma ffffffff88017310
=>  Loading section .fini, size 0x30 lma ffffffff88017358
=>  Loading section .ctors, size 0x8 lma ffffffff88017388
=>  Loading section .dtors, size 0x8 lma ffffffff88017390
=>  Loading section .rdata, size 0x3ad4 lma ffffffff880173a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ae78
=>  Loading section .data, size 0x4d0 lma ffffffff8801ae90
=>  Start address ffffffff88000004
=>  Transfer rate: 891552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 143/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:136  W:0    | mipstx39/jmr3904: termios02.exe
Result: invalid   
Time: 0:00:00.268675 termios02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013520
=>  Loading section .init, size 0x48 lma ffffffff88013590
=>  Loading section .fini, size 0x30 lma ffffffff880135d8
=>  Loading section .ctors, size 0x8 lma ffffffff88013608
=>  Loading section .dtors, size 0x8 lma ffffffff88013610
=>  Loading section .rdata, size 0x1e1c lma ffffffff88013620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015440
=>  Loading section .data, size 0x408 lma ffffffff88015458
=>  Start address ffffffff88000004
=>  Transfer rate: 705184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 144/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:137  W:0    | mipstx39/jmr3904: termios03.exe
Result: invalid   
Time: 0:00:00.257058 termios03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014520
=>  Loading section .init, size 0x48 lma ffffffff88014590
=>  Loading section .fini, size 0x30 lma ffffffff880145d8
=>  Loading section .ctors, size 0x8 lma ffffffff88014608
=>  Loading section .dtors, size 0x8 lma ffffffff88014610
=>  Loading section .rdata, size 0x220c lma ffffffff88014620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016830
=>  Loading section .data, size 0x458 lma ffffffff88016848
=>  Start address ffffffff88000004
=>  Transfer rate: 746656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 145/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:144  W:0    | mipstx39/jmr3904: termios04.exe
Result: invalid   
Time: 0:00:00.266944 termios04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14870 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014870
=>  Loading section .init, size 0x48 lma ffffffff880148f0
=>  Loading section .fini, size 0x30 lma ffffffff88014938
=>  Loading section .ctors, size 0x8 lma ffffffff88014968
=>  Loading section .dtors, size 0x8 lma ffffffff88014970
=>  Loading section .rdata, size 0x2148 lma ffffffff88014980
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ac8
=>  Loading section .data, size 0x488 lma ffffffff88016ae0
=>  Start address ffffffff88000004
=>  Transfer rate: 752384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 146/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:144  W:0    | mipstx39/jmr3904: termios05.exe
Result: invalid   
Time: 0:00:00.257166 termios05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014c30
=>  Loading section .init, size 0x48 lma ffffffff88014cb0
=>  Loading section .fini, size 0x30 lma ffffffff88014cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88014d28
=>  Loading section .dtors, size 0x8 lma ffffffff88014d30
=>  Loading section .rdata, size 0x21ac lma ffffffff88014d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ef0
=>  Loading section .data, size 0x488 lma ffffffff88016f08
=>  Start address ffffffff88000004
=>  Transfer rate: 760864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 147/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:144  W:0    | mipstx39/jmr3904: termios06.exe
Result: invalid   
Time: 0:00:00.289304 termios06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014920
=>  Loading section .init, size 0x48 lma ffffffff88014990
=>  Loading section .fini, size 0x30 lma ffffffff880149d8
=>  Loading section .ctors, size 0x8 lma ffffffff88014a08
=>  Loading section .dtors, size 0x8 lma ffffffff88014a10
=>  Loading section .rdata, size 0x22fc lma ffffffff88014a20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016d20
=>  Loading section .data, size 0x468 lma ffffffff88016d38
=>  Start address ffffffff88000004
=>  Transfer rate: 756896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 148/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:144  W:0    | mipstx39/jmr3904: termios07.exe
Result: invalid   
Time: 0:00:00.259725 termios07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14990 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014990
=>  Loading section .init, size 0x48 lma ffffffff88014a10
=>  Loading section .fini, size 0x30 lma ffffffff88014a58
=>  Loading section .ctors, size 0x8 lma ffffffff88014a88
=>  Loading section .dtors, size 0x8 lma ffffffff88014a90
=>  Loading section .rdata, size 0x21d0 lma ffffffff88014aa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016c70
=>  Loading section .data, size 0x488 lma ffffffff88016c88
=>  Start address ffffffff88000004
=>  Transfer rate: 755776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 149/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:144  W:0    | mipstx39/jmr3904: termios08.exe
Result: invalid   
Time: 0:00:00.255823 termios08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014150
=>  Loading section .init, size 0x48 lma ffffffff880141c0
=>  Loading section .fini, size 0x30 lma ffffffff88014208
=>  Loading section .ctors, size 0x8 lma ffffffff88014238
=>  Loading section .dtors, size 0x8 lma ffffffff88014240
=>  Loading section .rdata, size 0x2138 lma ffffffff88014250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016388
=>  Loading section .data, size 0x458 lma ffffffff880163a0
=>  Start address ffffffff88000004
=>  Transfer rate: 737152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 150/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:144  W:0    | mipstx39/jmr3904: termios09.exe
Result: invalid   
Time: 0:00:00.261929 termios09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18c00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018c00
=>  Loading section .init, size 0x48 lma ffffffff88018c70
=>  Loading section .fini, size 0x30 lma ffffffff88018cb8
=>  Loading section .ctors, size 0x8 lma ffffffff88018ce8
=>  Loading section .dtors, size 0x8 lma ffffffff88018cf0
=>  Loading section .rdata, size 0x233c lma ffffffff88018d00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b040
=>  Loading section .data, size 0x610 lma ffffffff8801b058
=>  Start address ffffffff88000004
=>  Transfer rate: 897760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 151/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:144  W:0    | mipstx39/jmr3904: termios10.exe
Result: invalid   
Time: 0:00:00.259053 termios10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16310 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88016310
=>  Loading section .init, size 0x48 lma ffffffff88016390
=>  Loading section .fini, size 0x30 lma ffffffff880163d8
=>  Loading section .ctors, size 0x8 lma ffffffff88016408
=>  Loading section .dtors, size 0x8 lma ffffffff88016410
=>  Loading section .rdata, size 0x23b8 lma ffffffff88016420
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880187d8
=>  Loading section .data, size 0x4d8 lma ffffffff880187f0
=>  Start address ffffffff88000004
=>  Transfer rate: 812544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 152/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:145  W:0    | mipstx39/jmr3904: termios11.exe
Result: invalid   
Time: 0:00:00.265565 termios11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x169f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880169f0
=>  Loading section .init, size 0x48 lma ffffffff88016a70
=>  Loading section .fini, size 0x30 lma ffffffff88016ab8
=>  Loading section .ctors, size 0x8 lma ffffffff88016ae8
=>  Loading section .dtors, size 0x8 lma ffffffff88016af0
=>  Loading section .rdata, size 0x23d0 lma ffffffff88016b00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018ed0
=>  Loading section .data, size 0x508 lma ffffffff88018ee8
=>  Start address ffffffff88000004
=>  Transfer rate: 827200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/termios11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 153/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:149  W:0    | mipstx39/jmr3904: top.exe
Result: invalid   
Time: 0:00:00.258909 top.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ea40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ea40
=>  Loading section .init, size 0x48 lma ffffffff8801eab0
=>  Loading section .fini, size 0x30 lma ffffffff8801eaf8
=>  Loading section .ctors, size 0x8 lma ffffffff8801eb28
=>  Loading section .dtors, size 0x8 lma ffffffff8801eb30
=>  Loading section .rdata, size 0x2c20 lma ffffffff8801eb40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88021760
=>  Loading section .data, size 0x5b4 lma ffffffff88021778
=>  Start address ffffffff88000004
=>  Transfer rate: 1108256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/top.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 154/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:147  W:0    | mipstx39/jmr3904: ttest01.exe
Result: invalid   
Time: 0:00:00.280865 ttest01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xb50 lma ffffffff88023c40
=>  Loading section .init, size 0x48 lma ffffffff88024790
=>  Loading section .fini, size 0x30 lma ffffffff880247d8
=>  Loading section .ctors, size 0x8 lma ffffffff88024808
=>  Loading section .dtors, size 0x8 lma ffffffff88024810
=>  Loading section .rdata, size 0x1c310 lma ffffffff88024820
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88040b30
=>  Loading section .data, size 0x1b48 lma ffffffff88040b48
=>  Start address ffffffff88000004
=>  Transfer rate: 2176064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 155/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:149  W:0    | mipstx39/jmr3904: ttest02.exe
Result: invalid   
Time: 0:00:00.267315 ttest02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16360 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff88016360
=>  Loading section .init, size 0x48 lma ffffffff880163f0
=>  Loading section .fini, size 0x30 lma ffffffff88016438
=>  Loading section .ctors, size 0x8 lma ffffffff88016468
=>  Loading section .dtors, size 0x8 lma ffffffff88016470
=>  Loading section .rdata, size 0x26a0 lma ffffffff88016480
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018b20
=>  Loading section .data, size 0x588 lma ffffffff88018b38
=>  Start address ffffffff88000004
=>  Transfer rate: 820672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/ttest02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 156/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:149  W:0    | mipstx39/jmr3904: tztest.exe
Result: invalid   
Time: 0:00:00.252750 tztest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15be0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015be0
=>  Loading section .init, size 0x48 lma ffffffff88015c50
=>  Loading section .fini, size 0x30 lma ffffffff88015c98
=>  Loading section .ctors, size 0x8 lma ffffffff88015cc8
=>  Loading section .dtors, size 0x8 lma ffffffff88015cd0
=>  Loading section .rdata, size 0x249c lma ffffffff88015ce0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018180
=>  Loading section .data, size 0x614 lma ffffffff88018198
=>  Start address ffffffff88000004
=>  Transfer rate: 802048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/tztest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 157/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:149  W:0    | mipstx39/jmr3904: uid01.exe
Result: invalid   
Time: 0:00:00.258930 uid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c3a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801c3a0
=>  Loading section .init, size 0x48 lma ffffffff8801c420
=>  Loading section .fini, size 0x30 lma ffffffff8801c468
=>  Loading section .ctors, size 0x8 lma ffffffff8801c498
=>  Loading section .dtors, size 0x8 lma ffffffff8801c4a0
=>  Loading section .rdata, size 0x285c lma ffffffff8801c4b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ed10
=>  Loading section .data, size 0x648 lma ffffffff8801ed28
=>  Start address ffffffff88000004
=>  Transfer rate: 1022752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/uid01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 158/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:156  W:0    | mipstx39/jmr3904: utf8proc01.exe
Result: invalid   
Time: 0:00:00.511294 utf8proc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11870 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011870
=>  Loading section .init, size 0x48 lma ffffffff880118e0
=>  Loading section .fini, size 0x30 lma ffffffff88011928
=>  Loading section .ctors, size 0x8 lma ffffffff88011958
=>  Loading section .dtors, size 0x8 lma ffffffff88011960
=>  Loading section .rdata, size 0x6cf0d lma ffffffff88011970
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8807e880
=>  Loading section .data, size 0x418 lma ffffffff8807e898
=>  Start address ffffffff88000004
=>  Transfer rate: 4154664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/libtests/utf8proc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 159/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:157  W:0    | mipstx39/jmr3904: psx01.exe
Result: invalid   
Time: 0:00:00.257199 psx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17020 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017020
=>  Loading section .init, size 0x48 lma ffffffff88017090
=>  Loading section .fini, size 0x30 lma ffffffff880170d8
=>  Loading section .ctors, size 0x8 lma ffffffff88017108
=>  Loading section .dtors, size 0x8 lma ffffffff88017110
=>  Loading section .rdata, size 0x24f8 lma ffffffff88017120
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019618
=>  Loading section .data, size 0x584 lma ffffffff88019630
=>  Start address ffffffff88000004
=>  Transfer rate: 843104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 160/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:157  W:0    | mipstx39/jmr3904: psx02.exe
Result: invalid   
Time: 0:00:00.279853 psx02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a190 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a190
=>  Loading section .init, size 0x48 lma ffffffff8801a200
=>  Loading section .fini, size 0x30 lma ffffffff8801a248
=>  Loading section .ctors, size 0x8 lma ffffffff8801a278
=>  Loading section .dtors, size 0x8 lma ffffffff8801a280
=>  Loading section .rdata, size 0x25e0 lma ffffffff8801a290
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c870
=>  Loading section .data, size 0x618 lma ffffffff8801c888
=>  Start address ffffffff88000004
=>  Transfer rate: 947392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 161/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:157  W:0    | mipstx39/jmr3904: psx03.exe
Result: invalid   
Time: 0:00:00.279651 psx03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a790 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a790
=>  Loading section .init, size 0x48 lma ffffffff8801a800
=>  Loading section .fini, size 0x30 lma ffffffff8801a848
=>  Loading section .ctors, size 0x8 lma ffffffff8801a878
=>  Loading section .dtors, size 0x8 lma ffffffff8801a880
=>  Loading section .rdata, size 0x26ec lma ffffffff8801a890
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cf80
=>  Loading section .data, size 0x618 lma ffffffff8801cf98
=>  Start address ffffffff88000004
=>  Transfer rate: 961824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 162/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:156  W:0    | mipstx39/jmr3904: psx04.exe
Result: invalid   
Time: 0:00:00.324944 psx04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a370 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a370
=>  Loading section .init, size 0x48 lma ffffffff8801a3e0
=>  Loading section .fini, size 0x30 lma ffffffff8801a428
=>  Loading section .ctors, size 0x8 lma ffffffff8801a458
=>  Loading section .dtors, size 0x8 lma ffffffff8801a460
=>  Loading section .rdata, size 0x3808 lma ffffffff8801a470
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801dc78
=>  Loading section .data, size 0x644 lma ffffffff8801dc90
=>  Start address ffffffff88000004
=>  Transfer rate: 988768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 163/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:157  W:0    | mipstx39/jmr3904: psx05.exe
Result: invalid   
Time: 0:00:00.313871 psx05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bd10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801bd10
=>  Loading section .init, size 0x48 lma ffffffff8801bd80
=>  Loading section .fini, size 0x30 lma ffffffff8801bdc8
=>  Loading section .ctors, size 0x8 lma ffffffff8801bdf8
=>  Loading section .dtors, size 0x8 lma ffffffff8801be00
=>  Loading section .rdata, size 0x34cc lma ffffffff8801be10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801f2e0
=>  Loading section .data, size 0x61c lma ffffffff8801f2f8
=>  Start address ffffffff88000004
=>  Transfer rate: 1034304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 164/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:157  W:0    | mipstx39/jmr3904: psx06.exe
Result: invalid   
Time: 0:00:00.288789 psx06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x178c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880178c0
=>  Loading section .init, size 0x48 lma ffffffff88017930
=>  Loading section .fini, size 0x30 lma ffffffff88017978
=>  Loading section .ctors, size 0x8 lma ffffffff880179a8
=>  Loading section .dtors, size 0x8 lma ffffffff880179b0
=>  Loading section .rdata, size 0x23dc lma ffffffff880179c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019da0
=>  Loading section .data, size 0x684 lma ffffffff88019db8
=>  Start address ffffffff88000004
=>  Transfer rate: 860544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 165/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:157  W:0    | mipstx39/jmr3904: psx07.exe
Result: invalid   
Time: 0:00:00.283229 psx07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bd60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801bd60
=>  Loading section .init, size 0x48 lma ffffffff8801bdd0
=>  Loading section .fini, size 0x30 lma ffffffff8801be18
=>  Loading section .ctors, size 0x8 lma ffffffff8801be48
=>  Loading section .dtors, size 0x8 lma ffffffff8801be50
=>  Loading section .rdata, size 0x4abc lma ffffffff8801be60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020920
=>  Loading section .data, size 0x61c lma ffffffff88020938
=>  Start address ffffffff88000004
=>  Transfer rate: 1079872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 166/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:159  W:0    | mipstx39/jmr3904: psx08.exe
Result: invalid   
Time: 0:00:00.255036 psx08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17d40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017d40
=>  Loading section .init, size 0x48 lma ffffffff88017db0
=>  Loading section .fini, size 0x30 lma ffffffff88017df8
=>  Loading section .ctors, size 0x8 lma ffffffff88017e28
=>  Loading section .dtors, size 0x8 lma ffffffff88017e30
=>  Loading section .rdata, size 0x253c lma ffffffff88017e40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a380
=>  Loading section .data, size 0x61c lma ffffffff8801a398
=>  Start address ffffffff88000004
=>  Transfer rate: 871744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 167/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:160  W:0    | mipstx39/jmr3904: psx09.exe
Result: invalid   
Time: 0:00:00.260454 psx09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x200a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880200a0
=>  Loading section .init, size 0x48 lma ffffffff88020110
=>  Loading section .fini, size 0x30 lma ffffffff88020158
=>  Loading section .ctors, size 0x8 lma ffffffff88020188
=>  Loading section .dtors, size 0x8 lma ffffffff88020190
=>  Loading section .rdata, size 0x32b4 lma ffffffff880201a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88023458
=>  Loading section .data, size 0x610 lma ffffffff88023470
=>  Start address ffffffff88000004
=>  Transfer rate: 1168288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 168/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:166  W:0    | mipstx39/jmr3904: psx10.exe
Result: invalid   
Time: 0:00:00.262470 psx10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13bb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013bb0
=>  Loading section .init, size 0x48 lma ffffffff88013c20
=>  Loading section .fini, size 0x30 lma ffffffff88013c68
=>  Loading section .ctors, size 0x8 lma ffffffff88013c98
=>  Loading section .dtors, size 0x8 lma ffffffff88013ca0
=>  Loading section .rdata, size 0x244c lma ffffffff88013cb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016100
=>  Loading section .data, size 0x424 lma ffffffff88016118
=>  Start address ffffffff88000004
=>  Transfer rate: 731520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 169/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:166  W:0    | mipstx39/jmr3904: psx11.exe
Result: invalid   
Time: 0:00:00.253527 psx11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017070
=>  Loading section .init, size 0x48 lma ffffffff880170e0
=>  Loading section .fini, size 0x30 lma ffffffff88017128
=>  Loading section .ctors, size 0x8 lma ffffffff88017158
=>  Loading section .dtors, size 0x8 lma ffffffff88017160
=>  Loading section .rdata, size 0x22b0 lma ffffffff88017170
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019420
=>  Loading section .data, size 0x610 lma ffffffff88019438
=>  Start address ffffffff88000004
=>  Transfer rate: 840192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 170/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:167  W:0    | mipstx39/jmr3904: psx12.exe
Result: invalid   
Time: 0:00:00.257460 psx12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17810 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017810
=>  Loading section .init, size 0x48 lma ffffffff88017880
=>  Loading section .fini, size 0x30 lma ffffffff880178c8
=>  Loading section .ctors, size 0x8 lma ffffffff880178f8
=>  Loading section .dtors, size 0x8 lma ffffffff88017900
=>  Loading section .rdata, size 0x22c4 lma ffffffff88017910
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019bd8
=>  Loading section .data, size 0x61c lma ffffffff88019bf0
=>  Start address ffffffff88000004
=>  Transfer rate: 856064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 171/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:167  W:0    | mipstx39/jmr3904: psx13.exe
Result: invalid   
Time: 0:00:00.290068 psx13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x176e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880176e0
=>  Loading section .init, size 0x48 lma ffffffff88017750
=>  Loading section .fini, size 0x30 lma ffffffff88017798
=>  Loading section .ctors, size 0x8 lma ffffffff880177c8
=>  Loading section .dtors, size 0x8 lma ffffffff880177d0
=>  Loading section .rdata, size 0x1c59 lma ffffffff880177e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019440
=>  Loading section .data, size 0x420 lma ffffffff88019458
=>  Start address ffffffff88000004
=>  Transfer rate: 836424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 172/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:167  W:0    | mipstx39/jmr3904: psx14.exe
Result: invalid   
Time: 0:00:00.284691 psx14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10fb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010fb0
=>  Loading section .init, size 0x48 lma ffffffff88011020
=>  Loading section .fini, size 0x30 lma ffffffff88011068
=>  Loading section .ctors, size 0x8 lma ffffffff88011098
=>  Loading section .dtors, size 0x8 lma ffffffff880110a0
=>  Loading section .rdata, size 0x2179 lma ffffffff880110b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013230
=>  Loading section .data, size 0x418 lma ffffffff88013248
=>  Start address ffffffff88000004
=>  Transfer rate: 635528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 173/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:167  W:0    | mipstx39/jmr3904: psx15.exe
Result: invalid   
Time: 0:00:00.276096 psx15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010060
=>  Loading section .init, size 0x48 lma ffffffff880100d0
=>  Loading section .fini, size 0x30 lma ffffffff88010118
=>  Loading section .ctors, size 0x8 lma ffffffff88010148
=>  Loading section .dtors, size 0x8 lma ffffffff88010150
=>  Loading section .rdata, size 0x1a05 lma ffffffff88010160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b68
=>  Loading section .data, size 0x418 lma ffffffff88011b80
=>  Start address ffffffff88000004
=>  Transfer rate: 588904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 174/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:167  W:0    | mipstx39/jmr3904: psx16.exe
Result: invalid   
Time: 0:00:00.313689 psx16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880115e0
=>  Loading section .init, size 0x48 lma ffffffff88011650
=>  Loading section .fini, size 0x30 lma ffffffff88011698
=>  Loading section .ctors, size 0x8 lma ffffffff880116c8
=>  Loading section .dtors, size 0x8 lma ffffffff880116d0
=>  Loading section .rdata, size 0x1b14 lma ffffffff880116e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131f8
=>  Loading section .data, size 0x424 lma ffffffff88013210
=>  Start address ffffffff88000004
=>  Transfer rate: 635200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psx16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 175/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:167  W:0    | mipstx39/jmr3904: psxaio01.exe
Result: invalid   
Time: 0:00:00.294410 psxaio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14b60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014b60
=>  Loading section .init, size 0x48 lma ffffffff88014bd0
=>  Loading section .fini, size 0x30 lma ffffffff88014c18
=>  Loading section .ctors, size 0x8 lma ffffffff88014c48
=>  Loading section .dtors, size 0x8 lma ffffffff88014c50
=>  Loading section .rdata, size 0x1cb1 lma ffffffff88014c60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016918
=>  Loading section .data, size 0x418 lma ffffffff88016930
=>  Start address ffffffff88000004
=>  Transfer rate: 747976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 176/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:171  W:0    | mipstx39/jmr3904: psxaio02.exe
Result: invalid   
Time: 0:00:00.261218 psxaio02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1aaf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801aaf0
=>  Loading section .init, size 0x48 lma ffffffff8801ab60
=>  Loading section .fini, size 0x30 lma ffffffff8801aba8
=>  Loading section .ctors, size 0x8 lma ffffffff8801abd8
=>  Loading section .dtors, size 0x8 lma ffffffff8801abe0
=>  Loading section .rdata, size 0x2518 lma ffffffff8801abf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801d108
=>  Loading section .data, size 0x584 lma ffffffff8801d120
=>  Start address ffffffff88000004
=>  Transfer rate: 963808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 177/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:173  W:0    | mipstx39/jmr3904: psxaio03.exe
Result: invalid   
Time: 0:00:00.265797 psxaio03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a7b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801a7b0
=>  Loading section .init, size 0x48 lma ffffffff8801a820
=>  Loading section .fini, size 0x30 lma ffffffff8801a868
=>  Loading section .ctors, size 0x8 lma ffffffff8801a898
=>  Loading section .dtors, size 0x8 lma ffffffff8801a8a0
=>  Loading section .rdata, size 0x22dc lma ffffffff8801a8b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cb90
=>  Loading section .data, size 0x590 lma ffffffff8801cba8
=>  Start address ffffffff88000004
=>  Transfer rate: 952672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxaio03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 178/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:173  W:0    | mipstx39/jmr3904: psxalarm01.exe
Result: invalid   
Time: 0:00:00.295959 psxalarm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012e30
=>  Loading section .init, size 0x48 lma ffffffff88012eb0
=>  Loading section .fini, size 0x30 lma ffffffff88012ef8
=>  Loading section .ctors, size 0x8 lma ffffffff88012f28
=>  Loading section .dtors, size 0x8 lma ffffffff88012f30
=>  Loading section .rdata, size 0x1cf0 lma ffffffff88012f40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c30
=>  Loading section .data, size 0x464 lma ffffffff88014c48
=>  Start address ffffffff88000004
=>  Transfer rate: 689440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxalarm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 179/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:173  W:0    | mipstx39/jmr3904: psxautoinit01.exe
Result: invalid   
Time: 0:00:00.254340 psxautoinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880111a0
=>  Loading section .init, size 0x48 lma ffffffff88011210
=>  Loading section .fini, size 0x30 lma ffffffff88011258
=>  Loading section .ctors, size 0x8 lma ffffffff88011288
=>  Loading section .dtors, size 0x8 lma ffffffff88011290
=>  Loading section .rdata, size 0x25a0 lma ffffffff880112a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013840
=>  Loading section .data, size 0x408 lma ffffffff88013858
=>  Start address ffffffff88000004
=>  Transfer rate: 647872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 180/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:173  W:0    | mipstx39/jmr3904: psxautoinit02.exe
Result: invalid   
Time: 0:00:00.271498 psxautoinit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012e00
=>  Loading section .init, size 0x48 lma ffffffff88012e70
=>  Loading section .fini, size 0x30 lma ffffffff88012eb8
=>  Loading section .ctors, size 0x8 lma ffffffff88012ee8
=>  Loading section .dtors, size 0x8 lma ffffffff88012ef0
=>  Loading section .rdata, size 0x26c8 lma ffffffff88012f00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880155c8
=>  Loading section .data, size 0x418 lma ffffffff880155e0
=>  Start address ffffffff88000004
=>  Transfer rate: 708480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxautoinit02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 181/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:173  W:0    | mipstx39/jmr3904: psxbarrier01.exe
Result: invalid   
Time: 0:00:00.298131 psxbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012520
=>  Loading section .init, size 0x48 lma ffffffff88012590
=>  Loading section .fini, size 0x30 lma ffffffff880125d8
=>  Loading section .ctors, size 0x8 lma ffffffff88012608
=>  Loading section .dtors, size 0x8 lma ffffffff88012610
=>  Loading section .rdata, size 0x217c lma ffffffff88012620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880147a0
=>  Loading section .data, size 0x494 lma ffffffff880147b8
=>  Start address ffffffff88000004
=>  Transfer rate: 680448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 182/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:176  W:0    | mipstx39/jmr3904: psxcancel.exe
Result: invalid   
Time: 0:00:00.252221 psxcancel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14f50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014f50
=>  Loading section .init, size 0x48 lma ffffffff88014fc0
=>  Loading section .fini, size 0x30 lma ffffffff88015008
=>  Loading section .ctors, size 0x8 lma ffffffff88015038
=>  Loading section .dtors, size 0x8 lma ffffffff88015040
=>  Loading section .rdata, size 0x28e8 lma ffffffff88015050
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017938
=>  Loading section .data, size 0x49c lma ffffffff88017950
=>  Start address ffffffff88000004
=>  Transfer rate: 782112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 183/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:178  W:0    | mipstx39/jmr3904: psxcancel01.exe
Result: invalid   
Time: 0:00:00.266296 psxcancel01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011950
=>  Loading section .init, size 0x48 lma ffffffff880119c0
=>  Loading section .fini, size 0x30 lma ffffffff88011a08
=>  Loading section .ctors, size 0x8 lma ffffffff88011a38
=>  Loading section .dtors, size 0x8 lma ffffffff88011a40
=>  Loading section .rdata, size 0x2468 lma ffffffff88011a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013eb8
=>  Loading section .data, size 0x448 lma ffffffff88013ed0
=>  Start address ffffffff88000004
=>  Transfer rate: 661632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcancel01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 184/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:176  W:0    | mipstx39/jmr3904: psxchroot01.exe
Result: invalid   
Time: 0:00:00.253459 psxchroot01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fb10
=>  Loading section .init, size 0x48 lma ffffffff8800fb80
=>  Loading section .fini, size 0x30 lma ffffffff8800fbc8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fbf8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc00
=>  Loading section .rdata, size 0x1b65 lma ffffffff8800fc10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011778
=>  Loading section .data, size 0x440 lma ffffffff88011790
=>  Start address ffffffff88000004
=>  Transfer rate: 581160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxchroot01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 185/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:183  W:0    | mipstx39/jmr3904: psxclassic01.exe
Result: invalid   
Time: 0:00:00.276161 psxclassic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x134b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880134b0
=>  Loading section .init, size 0x48 lma ffffffff88013530
=>  Loading section .fini, size 0x30 lma ffffffff88013578
=>  Loading section .ctors, size 0x8 lma ffffffff880135a8
=>  Loading section .dtors, size 0x8 lma ffffffff880135b0
=>  Loading section .rdata, size 0x1e64 lma ffffffff880135c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015428
=>  Loading section .data, size 0x4a4 lma ffffffff88015440
=>  Start address ffffffff88000004
=>  Transfer rate: 706240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclassic01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 186/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:184  W:0    | mipstx39/jmr3904: psxcleanup.exe
Result: invalid   
Time: 0:00:00.278692 psxcleanup.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14480 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014480
=>  Loading section .init, size 0x48 lma ffffffff880144f0
=>  Loading section .fini, size 0x30 lma ffffffff88014538
=>  Loading section .ctors, size 0x8 lma ffffffff88014568
=>  Loading section .dtors, size 0x8 lma ffffffff88014570
=>  Loading section .rdata, size 0x2694 lma ffffffff88014580
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016c18
=>  Loading section .data, size 0x46c lma ffffffff88016c30
=>  Start address ffffffff88000004
=>  Transfer rate: 754816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 187/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:184  W:0    | mipstx39/jmr3904: psxcleanup01.exe
Result: invalid   
Time: 0:00:00.566943 psxcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11160 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011160
=>  Loading section .init, size 0x48 lma ffffffff880111d0
=>  Loading section .fini, size 0x30 lma ffffffff88011218
=>  Loading section .ctors, size 0x8 lma ffffffff88011248
=>  Loading section .dtors, size 0x8 lma ffffffff88011250
=>  Loading section .rdata, size 0x1b2d lma ffffffff88011260
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d90
=>  Loading section .data, size 0x4b0 lma ffffffff88012da8
=>  Start address ffffffff88000004
=>  Transfer rate: 627304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 188/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:184  W:0    | mipstx39/jmr3904: psxcleanup02.exe
Result: invalid   
Time: 0:00:00.254945 psxcleanup02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10740 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010740
=>  Loading section .init, size 0x48 lma ffffffff880107b0
=>  Loading section .fini, size 0x30 lma ffffffff880107f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010828
=>  Loading section .dtors, size 0x8 lma ffffffff88010830
=>  Loading section .rdata, size 0x1ac9 lma ffffffff88010840
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012310
=>  Loading section .data, size 0x4a8 lma ffffffff88012328
=>  Start address ffffffff88000004
=>  Transfer rate: 605704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcleanup02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 189/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:184  W:0    | mipstx39/jmr3904: psxclock.exe
Result: invalid   
Time: 0:00:00.252825 psxclock.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19b00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019b00
=>  Loading section .init, size 0x48 lma ffffffff88019b70
=>  Loading section .fini, size 0x30 lma ffffffff88019bb8
=>  Loading section .ctors, size 0x8 lma ffffffff88019be8
=>  Loading section .dtors, size 0x8 lma ffffffff88019bf0
=>  Loading section .rdata, size 0x2970 lma ffffffff88019c00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c570
=>  Loading section .data, size 0x618 lma ffffffff8801c588
=>  Start address ffffffff88000004
=>  Transfer rate: 941248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 190/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:184  W:0    | mipstx39/jmr3904: psxclock01.exe
Result: invalid   
Time: 0:00:00.257017 psxclock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a30
=>  Loading section .init, size 0x48 lma ffffffff88010aa0
=>  Loading section .fini, size 0x30 lma ffffffff88010ae8
=>  Loading section .ctors, size 0x8 lma ffffffff88010b18
=>  Loading section .dtors, size 0x8 lma ffffffff88010b20
=>  Loading section .rdata, size 0x1a0d lma ffffffff88010b30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012540
=>  Loading section .data, size 0x418 lma ffffffff88012558
=>  Start address ffffffff88000004
=>  Transfer rate: 609064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 191/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:184  W:0    | mipstx39/jmr3904: psxclockrealtime01.exe
Result: invalid   
Time: 0:00:00.594355 psxclockrealtime01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16a30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88016a30
=>  Loading section .init, size 0x48 lma ffffffff88016aa0
=>  Loading section .fini, size 0x30 lma ffffffff88016ae8
=>  Loading section .ctors, size 0x8 lma ffffffff88016b18
=>  Loading section .dtors, size 0x8 lma ffffffff88016b20
=>  Loading section .rdata, size 0x26b0 lma ffffffff88016b30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880191e0
=>  Loading section .data, size 0x480 lma ffffffff880191f8
=>  Start address ffffffff88000004
=>  Transfer rate: 832384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxclockrealtime01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 192/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:184  W:0    | mipstx39/jmr3904: psxconcurrency01.exe
Result: invalid   
Time: 0:00:00.251812 psxconcurrency01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfcb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fcb0
=>  Loading section .init, size 0x48 lma ffffffff8800fd20
=>  Loading section .fini, size 0x30 lma ffffffff8800fd68
=>  Loading section .ctors, size 0x8 lma ffffffff8800fd98
=>  Loading section .dtors, size 0x8 lma ffffffff8800fda0
=>  Loading section .rdata, size 0x1ae1 lma ffffffff8800fdb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011898
=>  Loading section .data, size 0x408 lma ffffffff880118b0
=>  Start address ffffffff88000004
=>  Transfer rate: 582984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconcurrency01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 193/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:185  W:0    | mipstx39/jmr3904: psxcond01.exe
Result: invalid   
Time: 0:00:00.254330 psxcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x130a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880130a0
=>  Loading section .init, size 0x48 lma ffffffff88013110
=>  Loading section .fini, size 0x30 lma ffffffff88013158
=>  Loading section .ctors, size 0x8 lma ffffffff88013188
=>  Loading section .dtors, size 0x8 lma ffffffff88013190
=>  Loading section .rdata, size 0x2710 lma ffffffff880131a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880158b0
=>  Loading section .data, size 0x424 lma ffffffff880158c8
=>  Start address ffffffff88000004
=>  Transfer rate: 714528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 194/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:190  W:0    | mipstx39/jmr3904: psxcond02.exe
Result: invalid   
Time: 0:00:00.283010 psxcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106c0
=>  Loading section .init, size 0x48 lma ffffffff88010730
=>  Loading section .fini, size 0x30 lma ffffffff88010778
=>  Loading section .ctors, size 0x8 lma ffffffff880107a8
=>  Loading section .dtors, size 0x8 lma ffffffff880107b0
=>  Loading section .rdata, size 0x2658 lma ffffffff880107c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e18
=>  Loading section .data, size 0x408 lma ffffffff88012e30
=>  Start address ffffffff88000004
=>  Transfer rate: 627072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 195/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:191  W:0    | mipstx39/jmr3904: psxconfig01.exe
Result: invalid   
Time: 0:00:00.267157 psxconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x153e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xb0 lma ffffffff880153e0
=>  Loading section .init, size 0x48 lma ffffffff88015490
=>  Loading section .fini, size 0x30 lma ffffffff880154d8
=>  Loading section .ctors, size 0x8 lma ffffffff88015508
=>  Loading section .dtors, size 0x8 lma ffffffff88015510
=>  Loading section .rdata, size 0x2769 lma ffffffff88015520
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017c90
=>  Loading section .data, size 0x700 lma ffffffff88017ca8
=>  Start address ffffffff88000004
=>  Transfer rate: 793800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 196/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:191  W:0    | mipstx39/jmr3904: psxconfstr.exe
Result: invalid   
Time: 0:00:00.282406 psxconfstr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x174e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880174e0
=>  Loading section .init, size 0x48 lma ffffffff88017560
=>  Loading section .fini, size 0x30 lma ffffffff880175a8
=>  Loading section .ctors, size 0x8 lma ffffffff880175d8
=>  Loading section .dtors, size 0x8 lma ffffffff880175e0
=>  Loading section .rdata, size 0x2510 lma ffffffff880175f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019b00
=>  Loading section .data, size 0x448 lma ffffffff88019b18
=>  Start address ffffffff88000004
=>  Transfer rate: 850624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxconfstr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 197/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:191  W:0    | mipstx39/jmr3904: psxdevctl01.exe
Result: invalid   
Time: 0:00:00.300315 psxdevctl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x137f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880137f0
=>  Loading section .init, size 0x48 lma ffffffff88013860
=>  Loading section .fini, size 0x30 lma ffffffff880138a8
=>  Loading section .ctors, size 0x8 lma ffffffff880138d8
=>  Loading section .dtors, size 0x8 lma ffffffff880138e0
=>  Loading section .rdata, size 0x1dc8 lma ffffffff880138f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880156b8
=>  Loading section .data, size 0x408 lma ffffffff880156d0
=>  Start address ffffffff88000004
=>  Transfer rate: 710272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxdevctl01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 198/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:193  W:0    | mipstx39/jmr3904: psxeintr_join.exe
Result: invalid   
Time: 0:00:00.269349 psxeintr_join.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12170 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012170
=>  Loading section .init, size 0x48 lma ffffffff880121e0
=>  Loading section .fini, size 0x30 lma ffffffff88012228
=>  Loading section .ctors, size 0x8 lma ffffffff88012258
=>  Loading section .dtors, size 0x8 lma ffffffff88012260
=>  Loading section .rdata, size 0x1c95 lma ffffffff88012270
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f08
=>  Loading section .data, size 0x418 lma ffffffff88013f20
=>  Start address ffffffff88000004
=>  Transfer rate: 661864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxeintr_join.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 199/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:193  W:0    | mipstx39/jmr3904: psxenosys.exe
Result: invalid   
Time: 0:00:00.307162 psxenosys.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119c0
=>  Loading section .init, size 0x48 lma ffffffff88011a30
=>  Loading section .fini, size 0x30 lma ffffffff88011a78
=>  Loading section .ctors, size 0x8 lma ffffffff88011aa8
=>  Loading section .dtors, size 0x8 lma ffffffff88011ab0
=>  Loading section .rdata, size 0x26a8 lma ffffffff88011ac0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014168
=>  Loading section .data, size 0x41c lma ffffffff88014180
=>  Start address ffffffff88000004
=>  Transfer rate: 666784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxenosys.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 200/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:193  W:0    | mipstx39/jmr3904: psxfatal01.exe
Result: invalid   
Time: 0:00:00.275734 psxfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10db0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010db0
=>  Loading section .init, size 0x48 lma ffffffff88010e20
=>  Loading section .fini, size 0x30 lma ffffffff88010e68
=>  Loading section .ctors, size 0x8 lma ffffffff88010e98
=>  Loading section .dtors, size 0x8 lma ffffffff88010ea0
=>  Loading section .rdata, size 0x2768 lma ffffffff88010eb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013618
=>  Loading section .data, size 0x418 lma ffffffff88013630
=>  Start address ffffffff88000004
=>  Transfer rate: 643584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 201/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:193  W:0    | mipstx39/jmr3904: psxfatal02.exe
Result: invalid   
Time: 0:00:00.263499 psxfatal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d10
=>  Loading section .init, size 0x48 lma ffffffff88010d80
=>  Loading section .fini, size 0x30 lma ffffffff88010dc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010df8
=>  Loading section .dtors, size 0x8 lma ffffffff88010e00
=>  Loading section .rdata, size 0x277c lma ffffffff88010e10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013590
=>  Loading section .data, size 0x418 lma ffffffff880135a8
=>  Start address ffffffff88000004
=>  Transfer rate: 642464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfatal02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 202/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:198  W:0    | mipstx39/jmr3904: psxfchx01.exe
Result: invalid   
Time: 0:00:00.262087 psxfchx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11000 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011000
=>  Loading section .init, size 0x48 lma ffffffff88011070
=>  Loading section .fini, size 0x30 lma ffffffff880110b8
=>  Loading section .ctors, size 0x8 lma ffffffff880110e8
=>  Loading section .dtors, size 0x8 lma ffffffff880110f0
=>  Loading section .rdata, size 0x1f91 lma ffffffff88011100
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013098
=>  Loading section .data, size 0x418 lma ffffffff880130b0
=>  Start address ffffffff88000004
=>  Transfer rate: 632264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfchx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 203/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:198  W:0    | mipstx39/jmr3904: psxfenv01.exe
Result: invalid   
Time: 0:00:00.532599 psxfenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012e10
=>  Loading section .init, size 0x48 lma ffffffff88012e80
=>  Loading section .fini, size 0x30 lma ffffffff88012ec8
=>  Loading section .ctors, size 0x8 lma ffffffff88012ef8
=>  Loading section .dtors, size 0x8 lma ffffffff88012f00
=>  Loading section .rdata, size 0x1cbc lma ffffffff88012f10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014bd0
=>  Loading section .data, size 0x408 lma ffffffff88014be8
=>  Start address ffffffff88000004
=>  Transfer rate: 687904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 204/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:198  W:0    | mipstx39/jmr3904: psxfile01.exe
Result: invalid   
Time: 0:00:00.256209 psxfile01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23de0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88023de0
=>  Loading section .init, size 0x48 lma ffffffff88023e50
=>  Loading section .fini, size 0x30 lma ffffffff88023e98
=>  Loading section .ctors, size 0x8 lma ffffffff88023ec8
=>  Loading section .dtors, size 0x8 lma ffffffff88023ed0
=>  Loading section .rdata, size 0x447c lma ffffffff88023ee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88028360
=>  Loading section .data, size 0x618 lma ffffffff88028378
=>  Start address ffffffff88000004
=>  Transfer rate: 1330208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 205/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:201  W:0    | mipstx39/jmr3904: psxfile02.exe
Result: invalid   
Time: 0:00:00.257459 psxfile02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11920 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011920
=>  Loading section .init, size 0x48 lma ffffffff88011990
=>  Loading section .fini, size 0x30 lma ffffffff880119d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011a08
=>  Loading section .dtors, size 0x8 lma ffffffff88011a10
=>  Loading section .rdata, size 0x24b0 lma ffffffff88011a20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ed0
=>  Loading section .data, size 0x418 lma ffffffff88013ee8
=>  Start address ffffffff88000004
=>  Transfer rate: 661440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfile02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 206/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:201  W:0    | mipstx39/jmr3904: psxfilelock01.exe
Result: invalid   
Time: 0:00:00.267349 psxfilelock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11e50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011e50
=>  Loading section .init, size 0x48 lma ffffffff88011ec0
=>  Loading section .fini, size 0x30 lma ffffffff88011f08
=>  Loading section .ctors, size 0x8 lma ffffffff88011f38
=>  Loading section .dtors, size 0x8 lma ffffffff88011f40
=>  Loading section .rdata, size 0x1a45 lma ffffffff88011f50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013998
=>  Loading section .data, size 0x420 lma ffffffff880139b0
=>  Start address ffffffff88000004
=>  Transfer rate: 650792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxfilelock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 207/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:201  W:0    | mipstx39/jmr3904: psxftw01.exe
Result: invalid   
Time: 0:00:00.255020 psxftw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a440 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801a440
=>  Loading section .init, size 0x48 lma ffffffff8801a4c0
=>  Loading section .fini, size 0x30 lma ffffffff8801a508
=>  Loading section .ctors, size 0x8 lma ffffffff8801a538
=>  Loading section .dtors, size 0x8 lma ffffffff8801a540
=>  Loading section .rdata, size 0x4418 lma ffffffff8801a550
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801e968
=>  Loading section .data, size 0x4b8 lma ffffffff8801e980
=>  Start address ffffffff88000004
=>  Transfer rate: 1012096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxftw01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 208/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:201  W:0    | mipstx39/jmr3904: psxgetattrnp01.exe
Result: invalid   
Time: 0:00:00.263854 psxgetattrnp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11e80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011e80
=>  Loading section .init, size 0x48 lma ffffffff88011ef0
=>  Loading section .fini, size 0x30 lma ffffffff88011f38
=>  Loading section .ctors, size 0x8 lma ffffffff88011f68
=>  Loading section .dtors, size 0x8 lma ffffffff88011f70
=>  Loading section .rdata, size 0x1f65 lma ffffffff88011f80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ee8
=>  Loading section .data, size 0x418 lma ffffffff88013f00
=>  Start address ffffffff88000004
=>  Transfer rate: 661608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetattrnp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 209/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:201  W:0    | mipstx39/jmr3904: psxgetrusage01.exe
Result: invalid   
Time: 0:00:00.303003 psxgetrusage01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10120 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010120
=>  Loading section .init, size 0x48 lma ffffffff88010190
=>  Loading section .fini, size 0x30 lma ffffffff880101d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010208
=>  Loading section .dtors, size 0x8 lma ffffffff88010210
=>  Loading section .rdata, size 0x1b85 lma ffffffff88010220
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011da8
=>  Loading section .data, size 0x418 lma ffffffff88011dc0
=>  Start address ffffffff88000004
=>  Transfer rate: 593512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxgetrusage01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 210/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:207  W:0    | mipstx39/jmr3904: psxglobalcon01.exe
Result: invalid   
Time: 0:00:00.320102 psxglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fc00
=>  Loading section .init, size 0x48 lma ffffffff8800fc70
=>  Loading section .fini, size 0x30 lma ffffffff8800fcb8
=>  Loading section .ctors, size 0xc lma ffffffff8800fce8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fcf4
=>  Loading section .rdata, size 0x1a3d lma ffffffff8800fd00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011740
=>  Loading section .data, size 0x408 lma ffffffff88011758
=>  Start address ffffffff88000004
=>  Transfer rate: 580296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 211/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:207  W:0    | mipstx39/jmr3904: psxglobalcon02.exe
Result: invalid   
Time: 0:00:00.284846 psxglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010100
=>  Loading section .init, size 0x48 lma ffffffff88010170
=>  Loading section .fini, size 0x30 lma ffffffff880101b8
=>  Loading section .ctors, size 0xc lma ffffffff880101e8
=>  Loading section .dtors, size 0x8 lma ffffffff880101f4
=>  Loading section .rdata, size 0x1a65 lma ffffffff88010200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c68
=>  Loading section .data, size 0x478 lma ffffffff88011c80
=>  Start address ffffffff88000004
=>  Transfer rate: 591752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 212/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:208  W:0    | mipstx39/jmr3904: psxid01.exe
Result: invalid   
Time: 0:00:00.267219 psxid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13570 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013570
=>  Loading section .init, size 0x48 lma ffffffff880135e0
=>  Loading section .fini, size 0x30 lma ffffffff88013628
=>  Loading section .ctors, size 0x8 lma ffffffff88013658
=>  Loading section .dtors, size 0x8 lma ffffffff88013660
=>  Loading section .rdata, size 0x1d44 lma ffffffff88013670
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880153b8
=>  Loading section .data, size 0x448 lma ffffffff880153d0
=>  Start address ffffffff88000004
=>  Transfer rate: 704608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxid01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 213/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:207  W:0    | mipstx39/jmr3904: psximfs01.exe
Result: invalid   
Time: 0:00:00.322158 psximfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ec0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ec0
=>  Loading section .init, size 0x48 lma ffffffff88010f30
=>  Loading section .fini, size 0x30 lma ffffffff88010f78
=>  Loading section .ctors, size 0x8 lma ffffffff88010fa8
=>  Loading section .dtors, size 0x8 lma ffffffff88010fb0
=>  Loading section .rdata, size 0x2514 lma ffffffff88010fc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880134d8
=>  Loading section .data, size 0x418 lma ffffffff880134f0
=>  Start address ffffffff88000004
=>  Transfer rate: 640992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 214/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:207  W:0    | mipstx39/jmr3904: psximfs02.exe
Result: invalid   
Time: 0:00:00.269991 psximfs02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19140 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019140
=>  Loading section .init, size 0x48 lma ffffffff880191b0
=>  Loading section .fini, size 0x30 lma ffffffff880191f8
=>  Loading section .ctors, size 0x8 lma ffffffff88019228
=>  Loading section .dtors, size 0x8 lma ffffffff88019230
=>  Loading section .rdata, size 0x2890 lma ffffffff88019240
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801bad0
=>  Loading section .data, size 0x5ac lma ffffffff8801bae8
=>  Start address ffffffff88000004
=>  Transfer rate: 918624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psximfs02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 215/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:208  W:0    | mipstx39/jmr3904: psxinttypes01.exe
Result: invalid   
Time: 0:00:00.290067 psxinttypes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880144e0
=>  Loading section .init, size 0x48 lma ffffffff88014550
=>  Loading section .fini, size 0x30 lma ffffffff88014598
=>  Loading section .ctors, size 0x8 lma ffffffff880145c8
=>  Loading section .dtors, size 0x8 lma ffffffff880145d0
=>  Loading section .rdata, size 0x213c lma ffffffff880145e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016720
=>  Loading section .data, size 0x570 lma ffffffff88016738
=>  Start address ffffffff88000004
=>  Transfer rate: 746720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxinttypes01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 216/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:208  W:0    | mipstx39/jmr3904: psxitimer.exe
Result: invalid   
Time: 0:00:00.282906 psxitimer.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c70
=>  Loading section .init, size 0x48 lma ffffffff88010ce0
=>  Loading section .fini, size 0x30 lma ffffffff88010d28
=>  Loading section .ctors, size 0x8 lma ffffffff88010d58
=>  Loading section .dtors, size 0x8 lma ffffffff88010d60
=>  Loading section .rdata, size 0x1c0d lma ffffffff88010d70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012980
=>  Loading section .data, size 0x418 lma ffffffff88012998
=>  Start address ffffffff88000004
=>  Transfer rate: 617768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxitimer.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 217/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:209  W:0    | mipstx39/jmr3904: psxkey01.exe
Result: invalid   
Time: 0:00:00.252526 psxkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf600 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f600
=>  Loading section .init, size 0x48 lma ffffffff8800f670
=>  Loading section .fini, size 0x30 lma ffffffff8800f6b8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f6e8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f6f0
=>  Loading section .rdata, size 0x1cf1 lma ffffffff8800f700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880113f8
=>  Loading section .data, size 0x470 lma ffffffff88011410
=>  Start address ffffffff88000004
=>  Transfer rate: 574344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 218/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:217  W:0    | mipstx39/jmr3904: psxkey02.exe
Result: invalid   
Time: 0:00:00.257216 psxkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010210
=>  Loading section .init, size 0x48 lma ffffffff88010280
=>  Loading section .fini, size 0x30 lma ffffffff880102c8
=>  Loading section .ctors, size 0x8 lma ffffffff880102f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010300
=>  Loading section .rdata, size 0x1b09 lma ffffffff88010310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e20
=>  Loading section .data, size 0x470 lma ffffffff88011e38
=>  Start address ffffffff88000004
=>  Transfer rate: 595144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 219/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:217  W:0    | mipstx39/jmr3904: psxkey03.exe
Result: invalid   
Time: 0:00:00.254903 psxkey03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011220
=>  Loading section .init, size 0x48 lma ffffffff88011290
=>  Loading section .fini, size 0x30 lma ffffffff880112d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011308
=>  Loading section .dtors, size 0x8 lma ffffffff88011310
=>  Loading section .rdata, size 0x1b91 lma ffffffff88011320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012eb8
=>  Loading section .data, size 0x490 lma ffffffff88012ed0
=>  Start address ffffffff88000004
=>  Transfer rate: 629384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 220/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:217  W:0    | mipstx39/jmr3904: psxkey04.exe
Result: invalid   
Time: 0:00:00.259536 psxkey04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112d0
=>  Loading section .init, size 0x48 lma ffffffff88011340
=>  Loading section .fini, size 0x30 lma ffffffff88011388
=>  Loading section .ctors, size 0x8 lma ffffffff880113b8
=>  Loading section .dtors, size 0x8 lma ffffffff880113c0
=>  Loading section .rdata, size 0x1b91 lma ffffffff880113d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f68
=>  Loading section .data, size 0x498 lma ffffffff88012f80
=>  Start address ffffffff88000004
=>  Transfer rate: 630856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 221/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:217  W:0    | mipstx39/jmr3904: psxkey05.exe
Result: invalid   
Time: 0:00:00.254661 psxkey05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfac0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fac0
=>  Loading section .init, size 0x48 lma ffffffff8800fb30
=>  Loading section .fini, size 0x30 lma ffffffff8800fb78
=>  Loading section .ctors, size 0x8 lma ffffffff8800fba8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fbb0
=>  Loading section .rdata, size 0x1b15 lma ffffffff8800fbc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880116d8
=>  Loading section .data, size 0x470 lma ffffffff880116f0
=>  Start address ffffffff88000004
=>  Transfer rate: 580264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 222/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:217  W:0    | mipstx39/jmr3904: psxkey06.exe
Result: invalid   
Time: 0:00:00.261202 psxkey06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ec0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011ec0
=>  Loading section .init, size 0x48 lma ffffffff88011f30
=>  Loading section .fini, size 0x30 lma ffffffff88011f78
=>  Loading section .ctors, size 0x8 lma ffffffff88011fa8
=>  Loading section .dtors, size 0x8 lma ffffffff88011fb0
=>  Loading section .rdata, size 0x1e41 lma ffffffff88011fc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e08
=>  Loading section .data, size 0x4a0 lma ffffffff88013e20
=>  Start address ffffffff88000004
=>  Transfer rate: 660872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 223/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:217  W:0    | mipstx39/jmr3904: psxkey07.exe
Result: invalid   
Time: 0:00:00.260256 psxkey07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x132a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880132a0
=>  Loading section .init, size 0x48 lma ffffffff88013310
=>  Loading section .fini, size 0x30 lma ffffffff88013358
=>  Loading section .ctors, size 0x8 lma ffffffff88013388
=>  Loading section .dtors, size 0x8 lma ffffffff88013390
=>  Loading section .rdata, size 0x1d2c lma ffffffff880133a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150d0
=>  Loading section .data, size 0x490 lma ffffffff880150e8
=>  Start address ffffffff88000004
=>  Transfer rate: 699232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 224/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:217  W:0    | mipstx39/jmr3904: psxkey08.exe
Result: invalid   
Time: 0:00:00.256364 psxkey08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b60
=>  Loading section .init, size 0x48 lma ffffffff88011bd0
=>  Loading section .fini, size 0x30 lma ffffffff88011c18
=>  Loading section .ctors, size 0x8 lma ffffffff88011c48
=>  Loading section .dtors, size 0x8 lma ffffffff88011c50
=>  Loading section .rdata, size 0x1cd5 lma ffffffff88011c60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013938
=>  Loading section .data, size 0x4a0 lma ffffffff88013950
=>  Start address ffffffff88000004
=>  Transfer rate: 651048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 225/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:217  W:0    | mipstx39/jmr3904: psxkey09.exe
Result: invalid   
Time: 0:00:00.251430 psxkey09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011100
=>  Loading section .init, size 0x48 lma ffffffff88011170
=>  Loading section .fini, size 0x30 lma ffffffff880111b8
=>  Loading section .ctors, size 0x8 lma ffffffff880111e8
=>  Loading section .dtors, size 0x8 lma ffffffff880111f0
=>  Loading section .rdata, size 0x1b39 lma ffffffff88011200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d40
=>  Loading section .data, size 0x490 lma ffffffff88012d58
=>  Start address ffffffff88000004
=>  Transfer rate: 626376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 226/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:225  W:0    | mipstx39/jmr3904: psxkey10.exe
Result: invalid   
Time: 0:00:00.255693 psxkey10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011100
=>  Loading section .init, size 0x48 lma ffffffff88011170
=>  Loading section .fini, size 0x30 lma ffffffff880111b8
=>  Loading section .ctors, size 0x8 lma ffffffff880111e8
=>  Loading section .dtors, size 0x8 lma ffffffff880111f0
=>  Loading section .rdata, size 0x1b49 lma ffffffff88011200
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d50
=>  Loading section .data, size 0x490 lma ffffffff88012d68
=>  Start address ffffffff88000004
=>  Transfer rate: 626504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxkey10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 227/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:225  W:0    | mipstx39/jmr3904: psxmmap01.exe
Result: invalid   
Time: 0:00:00.257592 psxmmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a860 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8801a860
=>  Loading section .init, size 0x48 lma ffffffff8801a8e0
=>  Loading section .fini, size 0x30 lma ffffffff8801a928
=>  Loading section .ctors, size 0x8 lma ffffffff8801a958
=>  Loading section .dtors, size 0x8 lma ffffffff8801a960
=>  Loading section .rdata, size 0x25e8 lma ffffffff8801a970
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801cf58
=>  Loading section .data, size 0x5fc lma ffffffff8801cf70
=>  Start address ffffffff88000004
=>  Transfer rate: 961312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 228/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:225  W:0    | mipstx39/jmr3904: psxmount.exe
Result: invalid   
Time: 0:00:00.254081 psxmount.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12670 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012670
=>  Loading section .init, size 0x48 lma ffffffff880126e0
=>  Loading section .fini, size 0x30 lma ffffffff88012728
=>  Loading section .ctors, size 0x8 lma ffffffff88012758
=>  Loading section .dtors, size 0x8 lma ffffffff88012760
=>  Loading section .rdata, size 0x2cbc lma ffffffff88012770
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015430
=>  Loading section .data, size 0x4e0 lma ffffffff88015448
=>  Start address ffffffff88000004
=>  Transfer rate: 706784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmount.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 229/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:225  W:0    | mipstx39/jmr3904: psxmsgq01.exe
Result: invalid   
Time: 0:00:00.265373 psxmsgq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26c20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88026c20
=>  Loading section .init, size 0x48 lma ffffffff88026ca0
=>  Loading section .fini, size 0x30 lma ffffffff88026ce8
=>  Loading section .ctors, size 0x8 lma ffffffff88026d18
=>  Loading section .dtors, size 0x8 lma ffffffff88026d20
=>  Loading section .rdata, size 0x4784 lma ffffffff88026d30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8802b4b8
=>  Loading section .data, size 0x860 lma ffffffff8802b4d0
=>  Start address ffffffff88000004
=>  Transfer rate: 1435936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 230/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:225  W:0    | mipstx39/jmr3904: psxmsgq02.exe
Result: invalid   
Time: 0:00:00.255296 psxmsgq02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x172d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880172d0
=>  Loading section .init, size 0x48 lma ffffffff88017340
=>  Loading section .fini, size 0x30 lma ffffffff88017388
=>  Loading section .ctors, size 0x8 lma ffffffff880173b8
=>  Loading section .dtors, size 0x8 lma ffffffff880173c0
=>  Loading section .rdata, size 0x2b78 lma ffffffff880173d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019f48
=>  Loading section .data, size 0x640 lma ffffffff88019f60
=>  Start address ffffffff88000004
=>  Transfer rate: 863424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 231/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:225  W:0    | mipstx39/jmr3904: psxmsgq03.exe
Result: invalid   
Time: 0:00:00.256324 psxmsgq03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13fd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013fd0
=>  Loading section .init, size 0x48 lma ffffffff88014050
=>  Loading section .fini, size 0x30 lma ffffffff88014098
=>  Loading section .ctors, size 0x8 lma ffffffff880140c8
=>  Loading section .dtors, size 0x8 lma ffffffff880140d0
=>  Loading section .rdata, size 0x2934 lma ffffffff880140e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016a18
=>  Loading section .data, size 0x494 lma ffffffff88016a30
=>  Start address ffffffff88000004
=>  Transfer rate: 751040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 232/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:225  W:0    | mipstx39/jmr3904: psxmsgq04.exe
Result: invalid   
Time: 0:00:00.256475 psxmsgq04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013150
=>  Loading section .init, size 0x48 lma ffffffff880131c0
=>  Loading section .fini, size 0x30 lma ffffffff88013208
=>  Loading section .ctors, size 0x8 lma ffffffff88013238
=>  Loading section .dtors, size 0x8 lma ffffffff88013240
=>  Loading section .rdata, size 0x25a0 lma ffffffff88013250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880157f0
=>  Loading section .data, size 0x458 lma ffffffff88015808
=>  Start address ffffffff88000004
=>  Transfer rate: 713408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmsgq04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 233/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:225  W:0    | mipstx39/jmr3904: psxmutexattr01.exe
Result: invalid   
Time: 0:00:00.256680 psxmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ff70
=>  Loading section .init, size 0x48 lma ffffffff8800ffe0
=>  Loading section .fini, size 0x30 lma ffffffff88010028
=>  Loading section .ctors, size 0x8 lma ffffffff88010058
=>  Loading section .dtors, size 0x8 lma ffffffff88010060
=>  Loading section .rdata, size 0x1cf9 lma ffffffff88010070
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d70
=>  Loading section .data, size 0x440 lma ffffffff88011d88
=>  Start address ffffffff88000004
=>  Transfer rate: 593352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 234/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:233  W:0    | mipstx39/jmr3904: psxndbm01.exe
Result: invalid   
Time: 0:00:00.258560 psxndbm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x191a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880191a0
=>  Loading section .init, size 0x48 lma ffffffff88019210
=>  Loading section .fini, size 0x30 lma ffffffff88019258
=>  Loading section .ctors, size 0x8 lma ffffffff88019288
=>  Loading section .dtors, size 0x8 lma ffffffff88019290
=>  Loading section .rdata, size 0x2490 lma ffffffff880192a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b730
=>  Loading section .data, size 0x418 lma ffffffff8801b748
=>  Start address ffffffff88000004
=>  Transfer rate: 907968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxndbm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 235/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:233  W:0    | mipstx39/jmr3904: psxobj01.exe
Result: invalid   
Time: 0:00:00.255453 psxobj01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf7b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f7b0
=>  Loading section .init, size 0x48 lma ffffffff8800f820
=>  Loading section .fini, size 0x30 lma ffffffff8800f868
=>  Loading section .ctors, size 0x8 lma ffffffff8800f898
=>  Loading section .dtors, size 0x8 lma ffffffff8800f8a0
=>  Loading section .rdata, size 0x1b5d lma ffffffff8800f8b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011410
=>  Loading section .data, size 0x438 lma ffffffff88011428
=>  Start address ffffffff88000004
=>  Transfer rate: 574120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxobj01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 236/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:233  W:0    | mipstx39/jmr3904: psxonce01.exe
Result: invalid   
Time: 0:00:00.260191 psxonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd90
=>  Loading section .init, size 0x48 lma ffffffff8800fe00
=>  Loading section .fini, size 0x30 lma ffffffff8800fe48
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe78
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe80
=>  Loading section .rdata, size 0x1b9d lma ffffffff8800fe90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a30
=>  Loading section .data, size 0x430 lma ffffffff88011a48
=>  Start address ffffffff88000004
=>  Transfer rate: 586600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 237/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:233  W:0    | mipstx39/jmr3904: psxpasswd01.exe
Result: invalid   
Time: 0:00:00.257532 psxpasswd01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ce0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013ce0
=>  Loading section .init, size 0x48 lma ffffffff88013d50
=>  Loading section .fini, size 0x30 lma ffffffff88013d98
=>  Loading section .ctors, size 0x8 lma ffffffff88013dc8
=>  Loading section .dtors, size 0x8 lma ffffffff88013dd0
=>  Loading section .rdata, size 0x1fa0 lma ffffffff88013de0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015d80
=>  Loading section .data, size 0x4b8 lma ffffffff88015d98
=>  Start address ffffffff88000004
=>  Transfer rate: 725568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 238/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:233  W:0    | mipstx39/jmr3904: psxpasswd02.exe
Result: invalid   
Time: 0:00:00.256860 psxpasswd02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ddc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801ddc0
=>  Loading section .init, size 0x48 lma ffffffff8801de30
=>  Loading section .fini, size 0x30 lma ffffffff8801de78
=>  Loading section .ctors, size 0x8 lma ffffffff8801dea8
=>  Loading section .dtors, size 0x8 lma ffffffff8801deb0
=>  Loading section .rdata, size 0x2778 lma ffffffff8801dec0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020638
=>  Loading section .data, size 0x624 lma ffffffff88020650
=>  Start address ffffffff88000004
=>  Transfer rate: 1074016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpasswd02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 239/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:233  W:0    | mipstx39/jmr3904: psxpipe01.exe
Result: invalid   
Time: 0:00:00.252478 psxpipe01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x186d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880186d0
=>  Loading section .init, size 0x48 lma ffffffff88018740
=>  Loading section .fini, size 0x30 lma ffffffff88018788
=>  Loading section .ctors, size 0x8 lma ffffffff880187b8
=>  Loading section .dtors, size 0x8 lma ffffffff880187c0
=>  Loading section .rdata, size 0x2340 lma ffffffff880187d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ab10
=>  Loading section .data, size 0x5ac lma ffffffff8801ab28
=>  Start address ffffffff88000004
=>  Transfer rate: 886368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxpipe01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 240/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:233  W:0    | mipstx39/jmr3904: psxrdwrv.exe
Result: invalid   
Time: 0:00:00.251257 psxrdwrv.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x135a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880135a0
=>  Loading section .init, size 0x48 lma ffffffff88013610
=>  Loading section .fini, size 0x30 lma ffffffff88013658
=>  Loading section .ctors, size 0x8 lma ffffffff88013688
=>  Loading section .dtors, size 0x8 lma ffffffff88013690
=>  Loading section .rdata, size 0x287c lma ffffffff880136a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015f20
=>  Loading section .data, size 0x420 lma ffffffff88015f38
=>  Start address ffffffff88000004
=>  Transfer rate: 727648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrdwrv.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 241/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:233  W:0    | mipstx39/jmr3904: psxreaddir.exe
Result: invalid   
Time: 0:00:00.251755 psxreaddir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12290 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012290
=>  Loading section .init, size 0x48 lma ffffffff88012300
=>  Loading section .fini, size 0x30 lma ffffffff88012348
=>  Loading section .ctors, size 0x8 lma ffffffff88012378
=>  Loading section .dtors, size 0x8 lma ffffffff88012380
=>  Loading section .rdata, size 0x2571 lma ffffffff88012390
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014908
=>  Loading section .data, size 0x4ec lma ffffffff88014920
=>  Start address ffffffff88000004
=>  Transfer rate: 684008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxreaddir.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 242/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:241  W:0    | mipstx39/jmr3904: psxrwlock01.exe
Result: invalid   
Time: 0:00:00.257046 psxrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14a60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014a60
=>  Loading section .init, size 0x48 lma ffffffff88014ad0
=>  Loading section .fini, size 0x30 lma ffffffff88014b18
=>  Loading section .ctors, size 0x8 lma ffffffff88014b48
=>  Loading section .dtors, size 0x8 lma ffffffff88014b50
=>  Loading section .rdata, size 0x3030 lma ffffffff88014b60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017b90
=>  Loading section .data, size 0x494 lma ffffffff88017ba8
=>  Start address ffffffff88000004
=>  Transfer rate: 786848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 243/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:241  W:0    | mipstx39/jmr3904: psxsem01.exe
Result: invalid   
Time: 0:00:00.508788 psxsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1caa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801caa0
=>  Loading section .init, size 0x48 lma ffffffff8801cb10
=>  Loading section .fini, size 0x30 lma ffffffff8801cb58
=>  Loading section .ctors, size 0x8 lma ffffffff8801cb88
=>  Loading section .dtors, size 0x8 lma ffffffff8801cb90
=>  Loading section .rdata, size 0x3570 lma ffffffff8801cba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020110
=>  Loading section .data, size 0x5b4 lma ffffffff88020128
=>  Start address ffffffff88000004
=>  Transfer rate: 1062560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 244/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:241  W:0    | mipstx39/jmr3904: psxshm01.exe
Result: invalid   
Time: 0:00:00.254320 psxshm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12660 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012660
=>  Loading section .init, size 0x48 lma ffffffff880126d0
=>  Loading section .fini, size 0x30 lma ffffffff88012718
=>  Loading section .ctors, size 0x8 lma ffffffff88012748
=>  Loading section .dtors, size 0x8 lma ffffffff88012750
=>  Loading section .rdata, size 0x247c lma ffffffff88012760
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014be0
=>  Loading section .data, size 0x450 lma ffffffff88014bf8
=>  Start address ffffffff88000004
=>  Transfer rate: 688608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 245/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:241  W:0    | mipstx39/jmr3904: psxshm02.exe
Result: invalid   
Time: 0:00:00.272115 psxshm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12940 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012940
=>  Loading section .init, size 0x48 lma ffffffff880129b0
=>  Loading section .fini, size 0x30 lma ffffffff880129f8
=>  Loading section .ctors, size 0x8 lma ffffffff88012a28
=>  Loading section .dtors, size 0x8 lma ffffffff88012a30
=>  Loading section .rdata, size 0x247c lma ffffffff88012a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ec0
=>  Loading section .data, size 0x450 lma ffffffff88014ed8
=>  Start address ffffffff88000004
=>  Transfer rate: 694496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxshm02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 246/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:241  W:0    | mipstx39/jmr3904: psxsignal01.exe
Result: invalid   
Time: 0:00:00.258690 psxsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x186d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880186d0
=>  Loading section .init, size 0x48 lma ffffffff88018750
=>  Loading section .fini, size 0x30 lma ffffffff88018798
=>  Loading section .ctors, size 0x8 lma ffffffff880187c8
=>  Loading section .dtors, size 0x8 lma ffffffff880187d0
=>  Loading section .rdata, size 0x2508 lma ffffffff880187e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ace8
=>  Loading section .data, size 0x654 lma ffffffff8801ad00
=>  Start address ffffffff88000004
=>  Transfer rate: 891488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 247/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:241  W:0    | mipstx39/jmr3904: psxsignal02.exe
Result: invalid   
Time: 0:00:00.274003 psxsignal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ea0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012ea0
=>  Loading section .init, size 0x48 lma ffffffff88012f10
=>  Loading section .fini, size 0x30 lma ffffffff88012f58
=>  Loading section .ctors, size 0x8 lma ffffffff88012f88
=>  Loading section .dtors, size 0x8 lma ffffffff88012f90
=>  Loading section .rdata, size 0x1ced lma ffffffff88012fa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c90
=>  Loading section .data, size 0x4a8 lma ffffffff88014ca8
=>  Start address ffffffff88000004
=>  Transfer rate: 690728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 248/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:241  W:0    | mipstx39/jmr3904: psxsignal03.exe
Result: invalid   
Time: 0:00:00.257951 psxsignal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12db0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012db0
=>  Loading section .init, size 0x48 lma ffffffff88012e20
=>  Loading section .fini, size 0x30 lma ffffffff88012e68
=>  Loading section .ctors, size 0x8 lma ffffffff88012e98
=>  Loading section .dtors, size 0x8 lma ffffffff88012ea0
=>  Loading section .rdata, size 0x1e6d lma ffffffff88012eb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d20
=>  Loading section .data, size 0x430 lma ffffffff88014d38
=>  Start address ffffffff88000004
=>  Transfer rate: 690920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 249/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:241  W:0    | mipstx39/jmr3904: psxsignal04.exe
Result: invalid   
Time: 0:00:00.255331 psxsignal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12db0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012db0
=>  Loading section .init, size 0x48 lma ffffffff88012e20
=>  Loading section .fini, size 0x30 lma ffffffff88012e68
=>  Loading section .ctors, size 0x8 lma ffffffff88012e98
=>  Loading section .dtors, size 0x8 lma ffffffff88012ea0
=>  Loading section .rdata, size 0x1e85 lma ffffffff88012eb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d38
=>  Loading section .data, size 0x430 lma ffffffff88014d50
=>  Start address ffffffff88000004
=>  Transfer rate: 691112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 250/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:248  W:0    | mipstx39/jmr3904: psxsignal05.exe
Result: invalid   
Time: 0:00:00.255401 psxsignal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010f20
=>  Loading section .init, size 0x48 lma ffffffff88010f90
=>  Loading section .fini, size 0x30 lma ffffffff88010fd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011008
=>  Loading section .dtors, size 0x8 lma ffffffff88011010
=>  Loading section .rdata, size 0x1c41 lma ffffffff88011020
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c68
=>  Loading section .data, size 0x418 lma ffffffff88012c80
=>  Start address ffffffff88000004
=>  Transfer rate: 623688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 251/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:248  W:0    | mipstx39/jmr3904: psxsignal06.exe
Result: invalid   
Time: 0:00:00.253217 psxsignal06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13250 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013250
=>  Loading section .init, size 0x48 lma ffffffff880132c0
=>  Loading section .fini, size 0x30 lma ffffffff88013308
=>  Loading section .ctors, size 0x8 lma ffffffff88013338
=>  Loading section .dtors, size 0x8 lma ffffffff88013340
=>  Loading section .rdata, size 0x1d30 lma ffffffff88013350
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015080
=>  Loading section .data, size 0x424 lma ffffffff88015098
=>  Start address ffffffff88000004
=>  Transfer rate: 697760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 252/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:249  W:0    | mipstx39/jmr3904: psxsignal07.exe
Result: invalid   
Time: 0:00:00.259879 psxsignal07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15e00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88015e00
=>  Loading section .init, size 0x48 lma ffffffff88015e80
=>  Loading section .fini, size 0x30 lma ffffffff88015ec8
=>  Loading section .ctors, size 0x8 lma ffffffff88015ef8
=>  Loading section .dtors, size 0x8 lma ffffffff88015f00
=>  Loading section .rdata, size 0x1e88 lma ffffffff88015f10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017d98
=>  Loading section .data, size 0x49c lma ffffffff88017db0
=>  Start address ffffffff88000004
=>  Transfer rate: 791072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 253/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:248  W:0    | mipstx39/jmr3904: psxsignal08.exe
Result: invalid   
Time: 0:00:00.254605 psxsignal08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15540 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015540
=>  Loading section .init, size 0x48 lma ffffffff880155b0
=>  Loading section .fini, size 0x30 lma ffffffff880155f8
=>  Loading section .ctors, size 0x8 lma ffffffff88015628
=>  Loading section .dtors, size 0x8 lma ffffffff88015630
=>  Loading section .rdata, size 0x2200 lma ffffffff88015640
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017840
=>  Loading section .data, size 0x424 lma ffffffff88017858
=>  Start address ffffffff88000004
=>  Transfer rate: 779168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsignal08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 254/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:249  W:0    | mipstx39/jmr3904: psxspin01.exe
Result: invalid   
Time: 0:00:00.277667 psxspin01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10330 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010330
=>  Loading section .init, size 0x48 lma ffffffff880103a0
=>  Loading section .fini, size 0x30 lma ffffffff880103e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010418
=>  Loading section .dtors, size 0x8 lma ffffffff88010420
=>  Loading section .rdata, size 0x1c1d lma ffffffff88010430
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012050
=>  Loading section .data, size 0x418 lma ffffffff88012068
=>  Start address ffffffff88000004
=>  Transfer rate: 598952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxspin01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 255/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:248  W:0    | mipstx39/jmr3904: psxstack01.exe
Result: invalid   
Time: 0:00:00.287320 psxstack01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11460 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011460
=>  Loading section .init, size 0x48 lma ffffffff880114d0
=>  Loading section .fini, size 0x30 lma ffffffff88011518
=>  Loading section .ctors, size 0x8 lma ffffffff88011548
=>  Loading section .dtors, size 0x8 lma ffffffff88011550
=>  Loading section .rdata, size 0x1b59 lma ffffffff88011560
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130c0
=>  Loading section .data, size 0x428 lma ffffffff880130d8
=>  Start address ffffffff88000004
=>  Transfer rate: 632712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 256/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:248  W:0    | mipstx39/jmr3904: psxstack02.exe
Result: invalid   
Time: 0:00:00.280507 psxstack02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11430 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011430
=>  Loading section .init, size 0x48 lma ffffffff880114a0
=>  Loading section .fini, size 0x30 lma ffffffff880114e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011518
=>  Loading section .dtors, size 0x8 lma ffffffff88011520
=>  Loading section .rdata, size 0x1b59 lma ffffffff88011530
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013090
=>  Loading section .data, size 0x428 lma ffffffff880130a8
=>  Start address ffffffff88000004
=>  Transfer rate: 632328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstack02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 257/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:251  W:0    | mipstx39/jmr3904: psxstat.exe
Result: invalid   
Time: 0:00:00.251339 psxstat.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20880 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88020880
=>  Loading section .init, size 0x48 lma ffffffff880208f0
=>  Loading section .fini, size 0x30 lma ffffffff88020938
=>  Loading section .ctors, size 0x8 lma ffffffff88020968
=>  Loading section .dtors, size 0x8 lma ffffffff88020970
=>  Loading section .rdata, size 0x41cc lma ffffffff88020980
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88024b50
=>  Loading section .data, size 0x778 lma ffffffff88024b68
=>  Start address ffffffff88000004
=>  Transfer rate: 1218208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstat.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 258/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:252  W:0    | mipstx39/jmr3904: psxstrsignal01.exe
Result: invalid   
Time: 0:00:00.253105 psxstrsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12850 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012850
=>  Loading section .init, size 0x48 lma ffffffff880128c0
=>  Loading section .fini, size 0x30 lma ffffffff88012908
=>  Loading section .ctors, size 0x8 lma ffffffff88012938
=>  Loading section .dtors, size 0x8 lma ffffffff88012940
=>  Loading section .rdata, size 0x20a8 lma ffffffff88012950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880149f8
=>  Loading section .data, size 0x674 lma ffffffff88014a10
=>  Start address ffffffff88000004
=>  Transfer rate: 689120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxstrsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 259/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:252  W:0    | mipstx39/jmr3904: psxsysconf.exe
Result: invalid   
Time: 0:00:00.252904 psxsysconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10fb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010fb0
=>  Loading section .init, size 0x48 lma ffffffff88011020
=>  Loading section .fini, size 0x30 lma ffffffff88011068
=>  Loading section .ctors, size 0x8 lma ffffffff88011098
=>  Loading section .dtors, size 0x8 lma ffffffff880110a0
=>  Loading section .rdata, size 0x25e4 lma ffffffff880110b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013698
=>  Loading section .data, size 0x418 lma ffffffff880136b0
=>  Start address ffffffff88000004
=>  Transfer rate: 644576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxsysconf.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 260/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:252  W:0    | mipstx39/jmr3904: psxthreadname01.exe
Result: invalid   
Time: 0:00:00.303590 psxthreadname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100f0
=>  Loading section .init, size 0x48 lma ffffffff88010160
=>  Loading section .fini, size 0x30 lma ffffffff880101a8
=>  Loading section .ctors, size 0x8 lma ffffffff880101d8
=>  Loading section .dtors, size 0x8 lma ffffffff880101e0
=>  Loading section .rdata, size 0x1ad9 lma ffffffff880101f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cd0
=>  Loading section .data, size 0x418 lma ffffffff88011ce8
=>  Start address ffffffff88000004
=>  Transfer rate: 591752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxthreadname01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 261/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:259  W:0    | mipstx39/jmr3904: psxtime.exe
Result: invalid   
Time: 0:00:00.251720 psxtime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17d60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017d60
=>  Loading section .init, size 0x48 lma ffffffff88017dd0
=>  Loading section .fini, size 0x30 lma ffffffff88017e18
=>  Loading section .ctors, size 0x8 lma ffffffff88017e48
=>  Loading section .dtors, size 0x8 lma ffffffff88017e50
=>  Loading section .rdata, size 0x2534 lma ffffffff88017e60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a398
=>  Loading section .data, size 0x6f8 lma ffffffff8801a3b0
=>  Start address ffffffff88000004
=>  Transfer rate: 873696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtime.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 262/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:259  W:0    | mipstx39/jmr3904: psxtimer01.exe
Result: invalid   
Time: 0:00:00.279443 psxtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23030 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88023030
=>  Loading section .init, size 0x48 lma ffffffff880230b0
=>  Loading section .fini, size 0x30 lma ffffffff880230f8
=>  Loading section .ctors, size 0x8 lma ffffffff88023128
=>  Loading section .dtors, size 0x8 lma ffffffff88023130
=>  Loading section .rdata, size 0x3598 lma ffffffff88023140
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880266d8
=>  Loading section .data, size 0x63c lma ffffffff880266f0
=>  Start address ffffffff88000004
=>  Transfer rate: 1272096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 263/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:259  W:0    | mipstx39/jmr3904: psxtimer02.exe
Result: invalid   
Time: 0:00:00.298172 psxtimer02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13420 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013420
=>  Loading section .init, size 0x48 lma ffffffff880134a0
=>  Loading section .fini, size 0x30 lma ffffffff880134e8
=>  Loading section .ctors, size 0x8 lma ffffffff88013518
=>  Loading section .dtors, size 0x8 lma ffffffff88013520
=>  Loading section .rdata, size 0x2a24 lma ffffffff88013530
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015f58
=>  Loading section .data, size 0x448 lma ffffffff88015f70
=>  Start address ffffffff88000004
=>  Transfer rate: 728416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 264/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:259  W:0    | mipstx39/jmr3904: psxtimer_face01.exe
Result: invalid   
Time: 0:00:00.294093 psxtimer_face01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer_face01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer_face01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x120c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880120c0
=>  Loading section .init, size 0x48 lma ffffffff88012140
=>  Loading section .fini, size 0x30 lma ffffffff88012188
=>  Loading section .ctors, size 0x8 lma ffffffff880121b8
=>  Loading section .dtors, size 0x8 lma ffffffff880121c0
=>  Loading section .rdata, size 0x2724 lma ffffffff880121d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880148f8
=>  Loading section .data, size 0x448 lma ffffffff88014910
=>  Start address ffffffff88000004
=>  Transfer rate: 682592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimer_face01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 265/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:258  W:0    | mipstx39/jmr3904: psxtimes01.exe
Result: invalid   
Time: 0:00:00.258726 psxtimes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100d0
=>  Loading section .init, size 0x48 lma ffffffff88010140
=>  Loading section .fini, size 0x30 lma ffffffff88010188
=>  Loading section .ctors, size 0x8 lma ffffffff880101b8
=>  Loading section .dtors, size 0x8 lma ffffffff880101c0
=>  Loading section .rdata, size 0x1b39 lma ffffffff880101d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d10
=>  Loading section .data, size 0x418 lma ffffffff88011d28
=>  Start address ffffffff88000004
=>  Transfer rate: 592264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxtimes01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 266/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:259  W:0    | mipstx39/jmr3904: psxualarm.exe
Result: invalid   
Time: 0:00:00.253234 psxualarm.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018400
=>  Loading section .init, size 0x48 lma ffffffff88018470
=>  Loading section .fini, size 0x30 lma ffffffff880184b8
=>  Loading section .ctors, size 0x8 lma ffffffff880184e8
=>  Loading section .dtors, size 0x8 lma ffffffff880184f0
=>  Loading section .rdata, size 0x2370 lma ffffffff88018500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a870
=>  Loading section .data, size 0x64c lma ffffffff8801a888
=>  Start address ffffffff88000004
=>  Transfer rate: 882272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxualarm.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 267/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:260  W:0    | mipstx39/jmr3904: psxusleep.exe
Result: invalid   
Time: 0:00:00.262319 psxusleep.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x183a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880183a0
=>  Loading section .init, size 0x48 lma ffffffff88018410
=>  Loading section .fini, size 0x30 lma ffffffff88018458
=>  Loading section .ctors, size 0x8 lma ffffffff88018488
=>  Loading section .dtors, size 0x8 lma ffffffff88018490
=>  Loading section .rdata, size 0x22a4 lma ffffffff880184a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a748
=>  Loading section .data, size 0x61c lma ffffffff8801a760
=>  Start address ffffffff88000004
=>  Transfer rate: 879488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtests/psxusleep.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 268/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:260  W:0    | mipstx39/jmr3904: psxtmbarrier01.exe
Result: invalid   
Time: 0:00:00.262032 psxtmbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfde0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fde0
=>  Loading section .init, size 0x48 lma ffffffff8800fe50
=>  Loading section .fini, size 0x30 lma ffffffff8800fe98
=>  Loading section .ctors, size 0x8 lma ffffffff8800fec8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fed0
=>  Loading section .rdata, size 0x1a65 lma ffffffff8800fee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011948
=>  Loading section .data, size 0x408 lma ffffffff88011960
=>  Start address ffffffff88000004
=>  Transfer rate: 584424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 269/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:266  W:0    | mipstx39/jmr3904: psxtmbarrier02.exe
Result: invalid   
Time: 0:00:00.258732 psxtmbarrier02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10090 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010090
=>  Loading section .init, size 0x48 lma ffffffff88010100
=>  Loading section .fini, size 0x30 lma ffffffff88010148
=>  Loading section .ctors, size 0x8 lma ffffffff88010178
=>  Loading section .dtors, size 0x8 lma ffffffff88010180
=>  Loading section .rdata, size 0x1a69 lma ffffffff88010190
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c00
=>  Loading section .data, size 0x408 lma ffffffff88011c18
=>  Start address ffffffff88000004
=>  Transfer rate: 589960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 270/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:268  W:0    | mipstx39/jmr3904: psxtmbarrier03.exe
Result: invalid   
Time: 0:00:00.255753 psxtmbarrier03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ffd0
=>  Loading section .init, size 0x48 lma ffffffff88010040
=>  Loading section .fini, size 0x30 lma ffffffff88010088
=>  Loading section .ctors, size 0x8 lma ffffffff880100b8
=>  Loading section .dtors, size 0x8 lma ffffffff880100c0
=>  Loading section .rdata, size 0x1a91 lma ffffffff880100d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b68
=>  Loading section .data, size 0x408 lma ffffffff88011b80
=>  Start address ffffffff88000004
=>  Transfer rate: 588744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 271/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:268  W:0    | mipstx39/jmr3904: psxtmbarrier04.exe
Result: invalid   
Time: 0:00:00.540885 psxtmbarrier04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103d0
=>  Loading section .init, size 0x48 lma ffffffff88010440
=>  Loading section .fini, size 0x30 lma ffffffff88010488
=>  Loading section .ctors, size 0x8 lma ffffffff880104b8
=>  Loading section .dtors, size 0x8 lma ffffffff880104c0
=>  Loading section .rdata, size 0x1a61 lma ffffffff880104d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f38
=>  Loading section .data, size 0x408 lma ffffffff88011f50
=>  Start address ffffffff88000004
=>  Transfer rate: 596552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrier04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 272/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:268  W:0    | mipstx39/jmr3904: psxtmbarrierattr01.exe
Result: invalid   
Time: 0:00:00.274886 psxtmbarrierattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe00
=>  Loading section .init, size 0x48 lma ffffffff8800fe70
=>  Loading section .fini, size 0x30 lma ffffffff8800feb8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fee8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fef0
=>  Loading section .rdata, size 0x1af5 lma ffffffff8800ff00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119f8
=>  Loading section .data, size 0x408 lma ffffffff88011a10
=>  Start address ffffffff88000004
=>  Transfer rate: 585832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmbarrierattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 273/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:268  W:0    | mipstx39/jmr3904: psxtmcleanup01.exe
Result: invalid   
Time: 0:00:00.258954 psxtmcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe20
=>  Loading section .init, size 0x48 lma ffffffff8800fe90
=>  Loading section .fini, size 0x30 lma ffffffff8800fed8
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff08
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff10
=>  Loading section .rdata, size 0x1a65 lma ffffffff8800ff20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011988
=>  Loading section .data, size 0x440 lma ffffffff880119a0
=>  Start address ffffffff88000004
=>  Transfer rate: 585384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 274/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:268  W:0    | mipstx39/jmr3904: psxtmclocknanosleep01.exe
Result: invalid   
Time: 0:00:00.256044 psxtmclocknanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10660 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010660
=>  Loading section .init, size 0x48 lma ffffffff880106d0
=>  Loading section .fini, size 0x30 lma ffffffff88010718
=>  Loading section .ctors, size 0x8 lma ffffffff88010748
=>  Loading section .dtors, size 0x8 lma ffffffff88010750
=>  Loading section .rdata, size 0x1a0d lma ffffffff88010760
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012170
=>  Loading section .data, size 0x418 lma ffffffff88012188
=>  Start address ffffffff88000004
=>  Transfer rate: 601256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 275/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:268  W:0    | mipstx39/jmr3904: psxtmclocknanosleep02.exe
Result: invalid   
Time: 0:00:00.256489 psxtmclocknanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10770 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010770
=>  Loading section .init, size 0x48 lma ffffffff880107e0
=>  Loading section .fini, size 0x30 lma ffffffff88010828
=>  Loading section .ctors, size 0x8 lma ffffffff88010858
=>  Loading section .dtors, size 0x8 lma ffffffff88010860
=>  Loading section .rdata, size 0x1a69 lma ffffffff88010870
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122e0
=>  Loading section .data, size 0x410 lma ffffffff880122f8
=>  Start address ffffffff88000004
=>  Transfer rate: 604104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 276/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:268  W:0    | mipstx39/jmr3904: psxtmclocknanosleep03.exe
Result: invalid   
Time: 0:00:00.251460 psxtmclocknanosleep03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10770 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010770
=>  Loading section .init, size 0x48 lma ffffffff880107e0
=>  Loading section .fini, size 0x30 lma ffffffff88010828
=>  Loading section .ctors, size 0x8 lma ffffffff88010858
=>  Loading section .dtors, size 0x8 lma ffffffff88010860
=>  Loading section .rdata, size 0x1a69 lma ffffffff88010870
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122e0
=>  Loading section .data, size 0x410 lma ffffffff880122f8
=>  Start address ffffffff88000004
=>  Transfer rate: 604104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmclocknanosleep03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 277/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:271  W:0    | mipstx39/jmr3904: psxtmcond01.exe
Result: invalid   
Time: 0:00:00.252445 psxtmcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfee0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fee0
=>  Loading section .init, size 0x48 lma ffffffff8800ff50
=>  Loading section .fini, size 0x30 lma ffffffff8800ff98
=>  Loading section .ctors, size 0x8 lma ffffffff8800ffc8
=>  Loading section .dtors, size 0x8 lma ffffffff8800ffd0
=>  Loading section .rdata, size 0x1a75 lma ffffffff8800ffe0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a58
=>  Loading section .data, size 0x408 lma ffffffff88011a70
=>  Start address ffffffff88000004
=>  Transfer rate: 586600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 278/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:271  W:0    | mipstx39/jmr3904: psxtmcond02.exe
Result: invalid   
Time: 0:00:00.257022 psxtmcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10180 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010180
=>  Loading section .init, size 0x48 lma ffffffff880101f0
=>  Loading section .fini, size 0x30 lma ffffffff88010238
=>  Loading section .ctors, size 0x8 lma ffffffff88010268
=>  Loading section .dtors, size 0x8 lma ffffffff88010270
=>  Loading section .rdata, size 0x1a75 lma ffffffff88010280
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cf8
=>  Loading section .data, size 0x408 lma ffffffff88011d10
=>  Start address ffffffff88000004
=>  Transfer rate: 591976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 279/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:271  W:0    | mipstx39/jmr3904: psxtmcond03.exe
Result: invalid   
Time: 0:00:00.252904 psxtmcond03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b50
=>  Loading section .init, size 0x48 lma ffffffff88011bc0
=>  Loading section .fini, size 0x30 lma ffffffff88011c08
=>  Loading section .ctors, size 0x8 lma ffffffff88011c38
=>  Loading section .dtors, size 0x8 lma ffffffff88011c40
=>  Loading section .rdata, size 0x1ab1 lma ffffffff88011c50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013708
=>  Loading section .data, size 0x408 lma ffffffff88013720
=>  Start address ffffffff88000004
=>  Transfer rate: 645320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 280/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:277  W:0    | mipstx39/jmr3904: psxtmcond04.exe
Result: invalid   
Time: 0:00:00.295453 psxtmcond04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b30
=>  Loading section .init, size 0x48 lma ffffffff88011ba0
=>  Loading section .fini, size 0x30 lma ffffffff88011be8
=>  Loading section .ctors, size 0x8 lma ffffffff88011c18
=>  Loading section .dtors, size 0x8 lma ffffffff88011c20
=>  Loading section .rdata, size 0x1aa9 lma ffffffff88011c30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136e0
=>  Loading section .data, size 0x408 lma ffffffff880136f8
=>  Start address ffffffff88000004
=>  Transfer rate: 645000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 281/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:279  W:0    | mipstx39/jmr3904: psxtmcond05.exe
Result: invalid   
Time: 0:00:00.258776 psxtmcond05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10180 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010180
=>  Loading section .init, size 0x48 lma ffffffff880101f0
=>  Loading section .fini, size 0x30 lma ffffffff88010238
=>  Loading section .ctors, size 0x8 lma ffffffff88010268
=>  Loading section .dtors, size 0x8 lma ffffffff88010270
=>  Loading section .rdata, size 0x1a7d lma ffffffff88010280
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d00
=>  Loading section .data, size 0x408 lma ffffffff88011d18
=>  Start address ffffffff88000004
=>  Transfer rate: 592040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 282/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:279  W:0    | mipstx39/jmr3904: psxtmcond06.exe
Result: invalid   
Time: 0:00:00.290331 psxtmcond06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11cb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011cb0
=>  Loading section .init, size 0x48 lma ffffffff88011d20
=>  Loading section .fini, size 0x30 lma ffffffff88011d68
=>  Loading section .ctors, size 0x8 lma ffffffff88011d98
=>  Loading section .dtors, size 0x8 lma ffffffff88011da0
=>  Loading section .rdata, size 0x1ab9 lma ffffffff88011db0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013870
=>  Loading section .data, size 0x408 lma ffffffff88013888
=>  Start address ffffffff88000004
=>  Transfer rate: 648200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 283/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:279  W:0    | mipstx39/jmr3904: psxtmcond07.exe
Result: invalid   
Time: 0:00:00.325249 psxtmcond07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11840 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011840
=>  Loading section .init, size 0x48 lma ffffffff880118b0
=>  Loading section .fini, size 0x30 lma ffffffff880118f8
=>  Loading section .ctors, size 0x8 lma ffffffff88011928
=>  Loading section .dtors, size 0x8 lma ffffffff88011930
=>  Loading section .rdata, size 0x1ab9 lma ffffffff88011940
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013400
=>  Loading section .data, size 0x408 lma ffffffff88013418
=>  Start address ffffffff88000004
=>  Transfer rate: 639112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 284/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:279  W:0    | mipstx39/jmr3904: psxtmcond08.exe
Result: invalid   
Time: 0:00:00.266455 psxtmcond08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011530
=>  Loading section .init, size 0x48 lma ffffffff880115a0
=>  Loading section .fini, size 0x30 lma ffffffff880115e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011618
=>  Loading section .dtors, size 0x8 lma ffffffff88011620
=>  Loading section .rdata, size 0x1aa9 lma ffffffff88011630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130e0
=>  Loading section .data, size 0x408 lma ffffffff880130f8
=>  Start address ffffffff88000004
=>  Transfer rate: 632712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 285/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:279  W:0    | mipstx39/jmr3904: psxtmcond09.exe
Result: invalid   
Time: 0:00:00.273801 psxtmcond09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11560 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011560
=>  Loading section .init, size 0x48 lma ffffffff880115d0
=>  Loading section .fini, size 0x30 lma ffffffff88011618
=>  Loading section .ctors, size 0x8 lma ffffffff88011648
=>  Loading section .dtors, size 0x8 lma ffffffff88011650
=>  Loading section .rdata, size 0x1ab9 lma ffffffff88011660
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013120
=>  Loading section .data, size 0x408 lma ffffffff88013138
=>  Start address ffffffff88000004
=>  Transfer rate: 633224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 286/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:279  W:0    | mipstx39/jmr3904: psxtmcond10.exe
Result: invalid   
Time: 0:00:00.261643 psxtmcond10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880115c0
=>  Loading section .init, size 0x48 lma ffffffff88011630
=>  Loading section .fini, size 0x30 lma ffffffff88011678
=>  Loading section .ctors, size 0x8 lma ffffffff880116a8
=>  Loading section .dtors, size 0x8 lma ffffffff880116b0
=>  Loading section .rdata, size 0x1ad1 lma ffffffff880116c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013198
=>  Loading section .data, size 0x408 lma ffffffff880131b0
=>  Start address ffffffff88000004
=>  Transfer rate: 634184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmcond10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 287/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:279  W:0    | mipstx39/jmr3904: psxtmkey01.exe
Result: invalid   
Time: 0:00:00.256477 psxtmkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100e0
=>  Loading section .init, size 0x48 lma ffffffff88010150
=>  Loading section .fini, size 0x30 lma ffffffff88010198
=>  Loading section .ctors, size 0x8 lma ffffffff880101c8
=>  Loading section .dtors, size 0x8 lma ffffffff880101d0
=>  Loading section .rdata, size 0x1a65 lma ffffffff880101e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c48
=>  Loading section .data, size 0x470 lma ffffffff88011c60
=>  Start address ffffffff88000004
=>  Transfer rate: 591400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 288/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:283  W:0    | mipstx39/jmr3904: psxtmkey02.exe
Result: invalid   
Time: 0:00:00.256788 psxtmkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105f0
=>  Loading section .init, size 0x48 lma ffffffff88010660
=>  Loading section .fini, size 0x30 lma ffffffff880106a8
=>  Loading section .ctors, size 0x8 lma ffffffff880106d8
=>  Loading section .dtors, size 0x8 lma ffffffff880106e0
=>  Loading section .rdata, size 0x1a85 lma ffffffff880106f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012178
=>  Loading section .data, size 0x470 lma ffffffff88012190
=>  Start address ffffffff88000004
=>  Transfer rate: 602024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 289/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:284  W:0    | mipstx39/jmr3904: psxtmmq01.exe
Result: invalid   
Time: 0:00:00.260035 psxtmmq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12cd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012cd0
=>  Loading section .init, size 0x48 lma ffffffff88012d40
=>  Loading section .fini, size 0x30 lma ffffffff88012d88
=>  Loading section .ctors, size 0x8 lma ffffffff88012db8
=>  Loading section .dtors, size 0x8 lma ffffffff88012dc0
=>  Loading section .rdata, size 0x1d35 lma ffffffff88012dd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014b08
=>  Loading section .data, size 0x448 lma ffffffff88014b20
=>  Start address ffffffff88000004
=>  Transfer rate: 686824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmq01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 290/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:285  W:0    | mipstx39/jmr3904: psxtmmqrcvblock01.exe
Result: invalid   
Time: 0:00:00.257847 psxtmmqrcvblock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10dd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010dd0
=>  Loading section .init, size 0x48 lma ffffffff88010e40
=>  Loading section .fini, size 0x30 lma ffffffff88010e88
=>  Loading section .ctors, size 0x8 lma ffffffff88010eb8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ec0
=>  Loading section .rdata, size 0x1a99 lma ffffffff88010ed0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012970
=>  Loading section .data, size 0x438 lma ffffffff88012988
=>  Start address ffffffff88000004
=>  Transfer rate: 617864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 291/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:285  W:0    | mipstx39/jmr3904: psxtmmqrcvblock02.exe
Result: invalid   
Time: 0:00:00.354799 psxtmmqrcvblock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014c40
=>  Loading section .init, size 0x48 lma ffffffff88014cb0
=>  Loading section .fini, size 0x30 lma ffffffff88014cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88014d28
=>  Loading section .dtors, size 0x8 lma ffffffff88014d30
=>  Loading section .rdata, size 0x1c64 lma ffffffff88014d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880169a8
=>  Loading section .data, size 0x4a8 lma ffffffff880169c0
=>  Start address ffffffff88000004
=>  Transfer rate: 750304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmqrcvblock02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 292/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:286  W:0    | mipstx39/jmr3904: psxtmmutex01.exe
Result: invalid   
Time: 0:00:00.253941 psxtmmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ff30
=>  Loading section .init, size 0x48 lma ffffffff8800ffa0
=>  Loading section .fini, size 0x30 lma ffffffff8800ffe8
=>  Loading section .ctors, size 0x8 lma ffffffff88010018
=>  Loading section .dtors, size 0x8 lma ffffffff88010020
=>  Loading section .rdata, size 0x1a7d lma ffffffff88010030
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ab0
=>  Loading section .data, size 0x408 lma ffffffff88011ac8
=>  Start address ffffffff88000004
=>  Transfer rate: 587304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 293/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:286  W:0    | mipstx39/jmr3904: psxtmmutex02.exe
Result: invalid   
Time: 0:00:00.281242 psxtmmutex02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10750 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010750
=>  Loading section .init, size 0x48 lma ffffffff880107c0
=>  Loading section .fini, size 0x30 lma ffffffff88010808
=>  Loading section .ctors, size 0x8 lma ffffffff88010838
=>  Loading section .dtors, size 0x8 lma ffffffff88010840
=>  Loading section .rdata, size 0x1a89 lma ffffffff88010850
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122e0
=>  Loading section .data, size 0x408 lma ffffffff880122f8
=>  Start address ffffffff88000004
=>  Transfer rate: 604040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 294/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:286  W:0    | mipstx39/jmr3904: psxtmmutex03.exe
Result: invalid   
Time: 0:00:00.253359 psxtmmutex03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110c0
=>  Loading section .init, size 0x48 lma ffffffff88011130
=>  Loading section .fini, size 0x30 lma ffffffff88011178
=>  Loading section .ctors, size 0x8 lma ffffffff880111a8
=>  Loading section .dtors, size 0x8 lma ffffffff880111b0
=>  Loading section .rdata, size 0x1b1d lma ffffffff880111c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ce0
=>  Loading section .data, size 0x408 lma ffffffff88012cf8
=>  Start address ffffffff88000004
=>  Transfer rate: 624552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 295/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:292  W:0    | mipstx39/jmr3904: psxtmmutex04.exe
Result: invalid   
Time: 0:00:00.256521 psxtmmutex04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b80
=>  Loading section .init, size 0x48 lma ffffffff88010bf0
=>  Loading section .fini, size 0x30 lma ffffffff88010c38
=>  Loading section .ctors, size 0x8 lma ffffffff88010c68
=>  Loading section .dtors, size 0x8 lma ffffffff88010c70
=>  Loading section .rdata, size 0x1a91 lma ffffffff88010c80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012718
=>  Loading section .data, size 0x408 lma ffffffff88012730
=>  Start address ffffffff88000004
=>  Transfer rate: 612680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 296/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:293  W:0    | mipstx39/jmr3904: psxtmmutex05.exe
Result: invalid   
Time: 0:00:00.268249 psxtmmutex05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a20
=>  Loading section .init, size 0x48 lma ffffffff88010a90
=>  Loading section .fini, size 0x30 lma ffffffff88010ad8
=>  Loading section .ctors, size 0x8 lma ffffffff88010b08
=>  Loading section .dtors, size 0x8 lma ffffffff88010b10
=>  Loading section .rdata, size 0x1a99 lma ffffffff88010b20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125c0
=>  Loading section .data, size 0x408 lma ffffffff880125d8
=>  Start address ffffffff88000004
=>  Transfer rate: 609928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 297/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:294  W:0    | mipstx39/jmr3904: psxtmmutex06.exe
Result: invalid   
Time: 0:00:00.276862 psxtmmutex06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c40
=>  Loading section .init, size 0x48 lma ffffffff88010cb0
=>  Loading section .fini, size 0x30 lma ffffffff88010cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88010d28
=>  Loading section .dtors, size 0x8 lma ffffffff88010d30
=>  Loading section .rdata, size 0x1a91 lma ffffffff88010d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127d8
=>  Loading section .data, size 0x408 lma ffffffff880127f0
=>  Start address ffffffff88000004
=>  Transfer rate: 614216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 298/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:293  W:0    | mipstx39/jmr3904: psxtmmutex07.exe
Result: invalid   
Time: 0:00:00.266883 psxtmmutex07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e30
=>  Loading section .init, size 0x48 lma ffffffff88010ea0
=>  Loading section .fini, size 0x30 lma ffffffff88010ee8
=>  Loading section .ctors, size 0x8 lma ffffffff88010f18
=>  Loading section .dtors, size 0x8 lma ffffffff88010f20
=>  Loading section .rdata, size 0x1aad lma ffffffff88010f30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129e0
=>  Loading section .data, size 0x408 lma ffffffff880129f8
=>  Start address ffffffff88000004
=>  Transfer rate: 618408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutex07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 299/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:294  W:0    | mipstx39/jmr3904: psxtmmutexattr01.exe
Result: invalid   
Time: 0:00:00.286558 psxtmmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10190 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010190
=>  Loading section .init, size 0x48 lma ffffffff88010200
=>  Loading section .fini, size 0x30 lma ffffffff88010248
=>  Loading section .ctors, size 0x8 lma ffffffff88010278
=>  Loading section .dtors, size 0x8 lma ffffffff88010280
=>  Loading section .rdata, size 0x1c65 lma ffffffff88010290
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ef8
=>  Loading section .data, size 0x408 lma ffffffff88011f10
=>  Start address ffffffff88000004
=>  Transfer rate: 596072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 300/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:293  W:0    | mipstx39/jmr3904: psxtmnanosleep01.exe
Result: invalid   
Time: 0:00:00.257537 psxtmnanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106a0
=>  Loading section .init, size 0x48 lma ffffffff88010710
=>  Loading section .fini, size 0x30 lma ffffffff88010758
=>  Loading section .ctors, size 0x8 lma ffffffff88010788
=>  Loading section .dtors, size 0x8 lma ffffffff88010790
=>  Loading section .rdata, size 0x1a0d lma ffffffff880107a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121b0
=>  Loading section .data, size 0x410 lma ffffffff880121c8
=>  Start address ffffffff88000004
=>  Transfer rate: 601704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 301/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:293  W:0    | mipstx39/jmr3904: psxtmnanosleep02.exe
Result: invalid   
Time: 0:00:00.252159 psxtmnanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107b0
=>  Loading section .init, size 0x48 lma ffffffff88010820
=>  Loading section .fini, size 0x30 lma ffffffff88010868
=>  Loading section .ctors, size 0x8 lma ffffffff88010898
=>  Loading section .dtors, size 0x8 lma ffffffff880108a0
=>  Loading section .rdata, size 0x1a59 lma ffffffff880108b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012310
=>  Loading section .data, size 0x418 lma ffffffff88012328
=>  Start address ffffffff88000004
=>  Transfer rate: 604552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmnanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 302/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:295  W:0    | mipstx39/jmr3904: psxtmonce01.exe
Result: invalid   
Time: 0:00:00.253518 psxtmonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010150
=>  Loading section .init, size 0x48 lma ffffffff880101c0
=>  Loading section .fini, size 0x30 lma ffffffff88010208
=>  Loading section .ctors, size 0x8 lma ffffffff88010238
=>  Loading section .dtors, size 0x8 lma ffffffff88010240
=>  Loading section .rdata, size 0x1a55 lma ffffffff88010250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ca8
=>  Loading section .data, size 0x430 lma ffffffff88011cc0
=>  Start address ffffffff88000004
=>  Transfer rate: 591656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 303/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:295  W:0    | mipstx39/jmr3904: psxtmrwlock01.exe
Result: invalid   
Time: 0:00:00.253766 psxtmrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e90
=>  Loading section .init, size 0x48 lma ffffffff88010f00
=>  Loading section .fini, size 0x30 lma ffffffff88010f48
=>  Loading section .ctors, size 0x8 lma ffffffff88010f78
=>  Loading section .dtors, size 0x8 lma ffffffff88010f80
=>  Loading section .rdata, size 0x1bf5 lma ffffffff88010f90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012b88
=>  Loading section .data, size 0x408 lma ffffffff88012ba0
=>  Start address ffffffff88000004
=>  Transfer rate: 621800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 304/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:298  W:0    | mipstx39/jmr3904: psxtmrwlock02.exe
Result: invalid   
Time: 0:00:00.270089 psxtmrwlock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10390 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010390
=>  Loading section .init, size 0x48 lma ffffffff88010400
=>  Loading section .fini, size 0x30 lma ffffffff88010448
=>  Loading section .ctors, size 0x8 lma ffffffff88010478
=>  Loading section .dtors, size 0x8 lma ffffffff88010480
=>  Loading section .rdata, size 0x1a69 lma ffffffff88010490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f00
=>  Loading section .data, size 0x408 lma ffffffff88011f18
=>  Start address ffffffff88000004
=>  Transfer rate: 596104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 305/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:299  W:0    | mipstx39/jmr3904: psxtmrwlock03.exe
Result: invalid   
Time: 0:00:00.255680 psxtmrwlock03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010a80
=>  Loading section .init, size 0x48 lma ffffffff88010af0
=>  Loading section .fini, size 0x30 lma ffffffff88010b38
=>  Loading section .ctors, size 0x8 lma ffffffff88010b68
=>  Loading section .dtors, size 0x8 lma ffffffff88010b70
=>  Loading section .rdata, size 0x1a71 lma ffffffff88010b80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125f8
=>  Loading section .data, size 0x408 lma ffffffff88012610
=>  Start address ffffffff88000004
=>  Transfer rate: 610376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 306/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:300  W:0    | mipstx39/jmr3904: psxtmrwlock04.exe
Result: invalid   
Time: 0:00:00.301362 psxtmrwlock04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x101d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880101d0
=>  Loading section .init, size 0x48 lma ffffffff88010240
=>  Loading section .fini, size 0x30 lma ffffffff88010288
=>  Loading section .ctors, size 0x8 lma ffffffff880102b8
=>  Loading section .dtors, size 0x8 lma ffffffff880102c0
=>  Loading section .rdata, size 0x1a69 lma ffffffff880102d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d40
=>  Loading section .data, size 0x408 lma ffffffff88011d58
=>  Start address ffffffff88000004
=>  Transfer rate: 592520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 307/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:301  W:0    | mipstx39/jmr3904: psxtmrwlock05.exe
Result: invalid   
Time: 0:00:00.264339 psxtmrwlock05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x108b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880108b0
=>  Loading section .init, size 0x48 lma ffffffff88010920
=>  Loading section .fini, size 0x30 lma ffffffff88010968
=>  Loading section .ctors, size 0x8 lma ffffffff88010998
=>  Loading section .dtors, size 0x8 lma ffffffff880109a0
=>  Loading section .rdata, size 0x1a71 lma ffffffff880109b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012428
=>  Loading section .data, size 0x408 lma ffffffff88012440
=>  Start address ffffffff88000004
=>  Transfer rate: 606664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 308/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:301  W:0    | mipstx39/jmr3904: psxtmrwlock06.exe
Result: invalid   
Time: 0:00:00.299378 psxtmrwlock06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10330 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010330
=>  Loading section .init, size 0x48 lma ffffffff880103a0
=>  Loading section .fini, size 0x30 lma ffffffff880103e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010418
=>  Loading section .dtors, size 0x8 lma ffffffff88010420
=>  Loading section .rdata, size 0x1a71 lma ffffffff88010430
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ea8
=>  Loading section .data, size 0x408 lma ffffffff88011ec0
=>  Start address ffffffff88000004
=>  Transfer rate: 595400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 309/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:301  W:0    | mipstx39/jmr3904: psxtmrwlock07.exe
Result: invalid   
Time: 0:00:00.251522 psxtmrwlock07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010520
=>  Loading section .init, size 0x48 lma ffffffff88010590
=>  Loading section .fini, size 0x30 lma ffffffff880105d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010608
=>  Loading section .dtors, size 0x8 lma ffffffff88010610
=>  Loading section .rdata, size 0x1a69 lma ffffffff88010620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012090
=>  Loading section .data, size 0x408 lma ffffffff880120a8
=>  Start address ffffffff88000004
=>  Transfer rate: 599304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmrwlock07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 310/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:306  W:0    | mipstx39/jmr3904: psxtmsem01.exe
Result: invalid   
Time: 0:00:00.257970 psxtmsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106a0
=>  Loading section .init, size 0x48 lma ffffffff88010710
=>  Loading section .fini, size 0x30 lma ffffffff88010758
=>  Loading section .ctors, size 0x8 lma ffffffff88010788
=>  Loading section .dtors, size 0x8 lma ffffffff88010790
=>  Loading section .rdata, size 0x1b1d lma ffffffff880107a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880122c0
=>  Loading section .data, size 0x438 lma ffffffff880122d8
=>  Start address ffffffff88000004
=>  Transfer rate: 604200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 311/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:309  W:0    | mipstx39/jmr3904: psxtmsem02.exe
Result: invalid   
Time: 0:00:00.264633 psxtmsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10640 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010640
=>  Loading section .init, size 0x48 lma ffffffff880106b0
=>  Loading section .fini, size 0x30 lma ffffffff880106f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010728
=>  Loading section .dtors, size 0x8 lma ffffffff88010730
=>  Loading section .rdata, size 0x1abd lma ffffffff88010740
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012200
=>  Loading section .data, size 0x408 lma ffffffff88012218
=>  Start address ffffffff88000004
=>  Transfer rate: 602280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 312/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:307  W:0    | mipstx39/jmr3904: psxtmsem03.exe
Result: invalid   
Time: 0:00:00.273675 psxtmsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10200 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010200
=>  Loading section .init, size 0x48 lma ffffffff88010270
=>  Loading section .fini, size 0x30 lma ffffffff880102b8
=>  Loading section .ctors, size 0x8 lma ffffffff880102e8
=>  Loading section .dtors, size 0x8 lma ffffffff880102f0
=>  Loading section .rdata, size 0x1a59 lma ffffffff88010300
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d60
=>  Loading section .data, size 0x408 lma ffffffff88011d78
=>  Start address ffffffff88000004
=>  Transfer rate: 592776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 313/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:307  W:0    | mipstx39/jmr3904: psxtmsem04.exe
Result: invalid   
Time: 0:00:00.253003 psxtmsem04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1a61 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f78
=>  Loading section .data, size 0x408 lma ffffffff88011f90
=>  Start address ffffffff88000004
=>  Transfer rate: 597064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 314/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:308  W:0    | mipstx39/jmr3904: psxtmsem05.exe
Result: invalid   
Time: 0:00:00.254501 psxtmsem05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10600 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010600
=>  Loading section .init, size 0x48 lma ffffffff88010670
=>  Loading section .fini, size 0x30 lma ffffffff880106b8
=>  Loading section .ctors, size 0x8 lma ffffffff880106e8
=>  Loading section .dtors, size 0x8 lma ffffffff880106f0
=>  Loading section .rdata, size 0x1a61 lma ffffffff88010700
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012168
=>  Loading section .data, size 0x408 lma ffffffff88012180
=>  Start address ffffffff88000004
=>  Transfer rate: 601032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsem05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 315/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:309  W:0    | mipstx39/jmr3904: psxtmsleep01.exe
Result: invalid   
Time: 0:00:00.252060 psxtmsleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10700 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010700
=>  Loading section .init, size 0x48 lma ffffffff88010770
=>  Loading section .fini, size 0x30 lma ffffffff880107b8
=>  Loading section .ctors, size 0x8 lma ffffffff880107e8
=>  Loading section .dtors, size 0x8 lma ffffffff880107f0
=>  Loading section .rdata, size 0x1a0c lma ffffffff88010800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012210
=>  Loading section .data, size 0x414 lma ffffffff88012228
=>  Start address ffffffff88000004
=>  Transfer rate: 602496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 316/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:311  W:0    | mipstx39/jmr3904: psxtmsleep02.exe
Result: invalid   
Time: 0:00:00.303363 psxtmsleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107f0
=>  Loading section .init, size 0x48 lma ffffffff88010860
=>  Loading section .fini, size 0x30 lma ffffffff880108a8
=>  Loading section .ctors, size 0x8 lma ffffffff880108d8
=>  Loading section .dtors, size 0x8 lma ffffffff880108e0
=>  Loading section .rdata, size 0x1a50 lma ffffffff880108f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012340
=>  Loading section .data, size 0x414 lma ffffffff88012358
=>  Start address ffffffff88000004
=>  Transfer rate: 604960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmsleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 317/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:310  W:0    | mipstx39/jmr3904: psxtmthread01.exe
Result: invalid   
Time: 0:00:00.271175 psxtmthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd70
=>  Loading section .init, size 0x48 lma ffffffff8800fde0
=>  Loading section .fini, size 0x30 lma ffffffff8800fe28
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe58
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe60
=>  Loading section .rdata, size 0x1a39 lma ffffffff8800fe70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118b0
=>  Loading section .data, size 0x408 lma ffffffff880118c8
=>  Start address ffffffff88000004
=>  Transfer rate: 583176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 318/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:315  W:0    | mipstx39/jmr3904: psxtmthread02.exe
Result: invalid   
Time: 0:00:00.503806 psxtmthread02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe10
=>  Loading section .init, size 0x48 lma ffffffff8800fe80
=>  Loading section .fini, size 0x30 lma ffffffff8800fec8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fef8
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff00
=>  Loading section .rdata, size 0x1a39 lma ffffffff8800ff10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011950
=>  Loading section .data, size 0x408 lma ffffffff88011968
=>  Start address ffffffff88000004
=>  Transfer rate: 584456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 319/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:315  W:0    | mipstx39/jmr3904: psxtmthread03.exe
Result: invalid   
Time: 0:00:00.253290 psxtmthread03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd40
=>  Loading section .init, size 0x48 lma ffffffff8800fdb0
=>  Loading section .fini, size 0x30 lma ffffffff8800fdf8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe28
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe30
=>  Loading section .rdata, size 0x1a39 lma ffffffff8800fe40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011880
=>  Loading section .data, size 0x408 lma ffffffff88011898
=>  Start address ffffffff88000004
=>  Transfer rate: 582792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 320/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:315  W:0    | mipstx39/jmr3904: psxtmthread04.exe
Result: invalid   
Time: 0:00:00.263723 psxtmthread04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100f0
=>  Loading section .init, size 0x48 lma ffffffff88010160
=>  Loading section .fini, size 0x30 lma ffffffff880101a8
=>  Loading section .ctors, size 0x8 lma ffffffff880101d8
=>  Loading section .dtors, size 0x8 lma ffffffff880101e0
=>  Loading section .rdata, size 0x1a6d lma ffffffff880101f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c60
=>  Loading section .data, size 0x408 lma ffffffff88011c78
=>  Start address ffffffff88000004
=>  Transfer rate: 590760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 321/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:316  W:0    | mipstx39/jmr3904: psxtmthread05.exe
Result: invalid   
Time: 0:00:00.265359 psxtmthread05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10130 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010130
=>  Loading section .init, size 0x48 lma ffffffff880101a0
=>  Loading section .fini, size 0x30 lma ffffffff880101e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010218
=>  Loading section .dtors, size 0x8 lma ffffffff88010220
=>  Loading section .rdata, size 0x1a59 lma ffffffff88010230
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c90
=>  Loading section .data, size 0x408 lma ffffffff88011ca8
=>  Start address ffffffff88000004
=>  Transfer rate: 591112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 322/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:316  W:0    | mipstx39/jmr3904: psxtmthread06.exe
Result: invalid   
Time: 0:00:00.256018 psxtmthread06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10130 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010130
=>  Loading section .init, size 0x48 lma ffffffff880101a0
=>  Loading section .fini, size 0x30 lma ffffffff880101e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010218
=>  Loading section .dtors, size 0x8 lma ffffffff88010220
=>  Loading section .rdata, size 0x1a59 lma ffffffff88010230
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c90
=>  Loading section .data, size 0x408 lma ffffffff88011ca8
=>  Start address ffffffff88000004
=>  Transfer rate: 591112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthread06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 323/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:316  W:0    | mipstx39/jmr3904: psxtmthreadattr01.exe
Result: invalid   
Time: 0:00:00.272280 psxtmthreadattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105d0
=>  Loading section .init, size 0x48 lma ffffffff88010640
=>  Loading section .fini, size 0x30 lma ffffffff88010688
=>  Loading section .ctors, size 0x8 lma ffffffff880106b8
=>  Loading section .dtors, size 0x8 lma ffffffff880106c0
=>  Loading section .rdata, size 0x1d7d lma ffffffff880106d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012450
=>  Loading section .data, size 0x408 lma ffffffff88012468
=>  Start address ffffffff88000004
=>  Transfer rate: 607016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/psxtmtests/psxtmthreadattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 324/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:317  W:0    | mipstx39/jmr3904: rhdeadlockbrk.exe
Result: invalid   
Time: 0:00:00.299644 rhdeadlockbrk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011690
=>  Loading section .init, size 0x48 lma ffffffff88011700
=>  Loading section .fini, size 0x30 lma ffffffff88011748
=>  Loading section .ctors, size 0x8 lma ffffffff88011778
=>  Loading section .dtors, size 0x8 lma ffffffff88011780
=>  Loading section .rdata, size 0x1e95 lma ffffffff88011790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013628
=>  Loading section .data, size 0x438 lma ffffffff88013640
=>  Start address ffffffff88000004
=>  Transfer rate: 643944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhdeadlockbrk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 325/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:317  W:0    | mipstx39/jmr3904: rhilatency.exe
Result: invalid   
Time: 0:00:00.251403 rhilatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf850 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f850
=>  Loading section .init, size 0x48 lma ffffffff8800f8c0
=>  Loading section .fini, size 0x30 lma ffffffff8800f908
=>  Loading section .ctors, size 0x8 lma ffffffff8800f938
=>  Loading section .dtors, size 0x8 lma ffffffff8800f940
=>  Loading section .rdata, size 0x1dc9 lma ffffffff8800f950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011720
=>  Loading section .data, size 0x408 lma ffffffff88011738
=>  Start address ffffffff88000004
=>  Transfer rate: 579976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhilatency.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 326/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:323  W:0    | mipstx39/jmr3904: rhmlatency.exe
Result: invalid   
Time: 0:00:00.277174 rhmlatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105a0
=>  Loading section .init, size 0x48 lma ffffffff88010610
=>  Loading section .fini, size 0x30 lma ffffffff88010658
=>  Loading section .ctors, size 0x8 lma ffffffff88010688
=>  Loading section .dtors, size 0x8 lma ffffffff88010690
=>  Loading section .rdata, size 0x1e39 lma ffffffff880106a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124e0
=>  Loading section .data, size 0x438 lma ffffffff880124f8
=>  Start address ffffffff88000004
=>  Transfer rate: 608520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhmlatency.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 327/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:323  W:0    | mipstx39/jmr3904: rhsemshuffle.exe
Result: invalid   
Time: 0:00:00.266904 rhsemshuffle.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011f60
=>  Loading section .init, size 0x48 lma ffffffff88011fd0
=>  Loading section .fini, size 0x30 lma ffffffff88012018
=>  Loading section .ctors, size 0x8 lma ffffffff88012048
=>  Loading section .dtors, size 0x8 lma ffffffff88012050
=>  Loading section .rdata, size 0x1ea9 lma ffffffff88012060
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f10
=>  Loading section .data, size 0x448 lma ffffffff88013f28
=>  Start address ffffffff88000004
=>  Transfer rate: 662280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhsemshuffle.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 328/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:323  W:0    | mipstx39/jmr3904: rhtaskpreempt.exe
Result: invalid   
Time: 0:00:00.281856 rhtaskpreempt.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf6a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f6a0
=>  Loading section .init, size 0x48 lma ffffffff8800f710
=>  Loading section .fini, size 0x30 lma ffffffff8800f758
=>  Loading section .ctors, size 0x8 lma ffffffff8800f788
=>  Loading section .dtors, size 0x8 lma ffffffff8800f790
=>  Loading section .rdata, size 0x1e11 lma ffffffff8800f7a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880115b8
=>  Loading section .data, size 0x408 lma ffffffff880115d0
=>  Start address ffffffff88000004
=>  Transfer rate: 577096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskpreempt.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 329/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:323  W:0    | mipstx39/jmr3904: rhtaskswitch.exe
Result: invalid   
Time: 0:00:00.264934 rhtaskswitch.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf530 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f530
=>  Loading section .init, size 0x48 lma ffffffff8800f5a0
=>  Loading section .fini, size 0x30 lma ffffffff8800f5e8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f618
=>  Loading section .dtors, size 0x8 lma ffffffff8800f620
=>  Loading section .rdata, size 0x1e11 lma ffffffff8800f630
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011448
=>  Loading section .data, size 0x408 lma ffffffff88011460
=>  Start address ffffffff88000004
=>  Transfer rate: 574152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/rhealstone/rhtaskswitch.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 330/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:323  W:0    | mipstx39/jmr3904: base_sp.exe
Result: invalid   
Time: 0:00:00.254392 base_sp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010220
=>  Loading section .init, size 0x48 lma ffffffff88010290
=>  Loading section .fini, size 0x30 lma ffffffff880102d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010308
=>  Loading section .dtors, size 0x8 lma ffffffff88010310
=>  Loading section .rdata, size 0x1e55 lma ffffffff88010320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012178
=>  Loading section .data, size 0x418 lma ffffffff88012190
=>  Start address ffffffff88000004
=>  Transfer rate: 601320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/base_sp.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 331/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:325  W:0    | mipstx39/jmr3904: capture.exe
Result: invalid   
Time: 0:00:00.261603 capture.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2fca0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8802fca0
=>  Loading section .init, size 0x48 lma ffffffff8802fd20
=>  Loading section .fini, size 0x30 lma ffffffff8802fd68
=>  Loading section .ctors, size 0x8 lma ffffffff8802fd98
=>  Loading section .dtors, size 0x8 lma ffffffff8802fda0
=>  Loading section .rdata, size 0x571c lma ffffffff8802fdb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880354d0
=>  Loading section .data, size 0x984 lma ffffffff880354e8
=>  Start address ffffffff88000004
=>  Transfer rate: 1766144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/capture.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 332/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:325  W:0    | mipstx39/jmr3904: cdtest.exe
Result: invalid   
Time: 0:00:00.286639 cdtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2d858 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x88 lma ffffffff8802d858
=>  Loading section .init, size 0x48 lma ffffffff8802d8e0
=>  Loading section .fini, size 0x30 lma ffffffff8802d928
=>  Loading section .ctors, size 0x1c lma ffffffff8802d958
=>  Loading section .dtors, size 0x8 lma ffffffff8802d974
=>  Loading section .rdata, size 0x4634 lma ffffffff8802d980
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88031fb8
=>  Loading section .rel.dyn, size 0x20 lma ffffffff88031fd0
=>  Loading section .data, size 0x640 lma ffffffff88031ff0
=>  Loading section .sdata, size 0x4 lma ffffffff88032630
=>  Start address ffffffff88000004
=>  Transfer rate: 1651040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/cdtest.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 333/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:325  W:0    | mipstx39/jmr3904: fileio.exe
Result: invalid   
Time: 0:00:00.295141 fileio.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x7fda0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8807fda0
=>  Loading section .init, size 0x48 lma ffffffff8807fe20
=>  Loading section .fini, size 0x30 lma ffffffff8807fe68
=>  Loading section .ctors, size 0x8 lma ffffffff8807fe98
=>  Loading section .dtors, size 0x8 lma ffffffff8807fea0
=>  Loading section .rdata, size 0x12ed0 lma ffffffff8807feb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88092d80
=>  Loading section .data, size 0x14c8 lma ffffffff88092d98
=>  Start address ffffffff88000004
=>  Transfer rate: 4854464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/fileio.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 334/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:331  W:0    | mipstx39/jmr3904: hello.exe
Result: invalid   
Time: 0:00:00.259507 hello.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x175e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880175e0
=>  Loading section .init, size 0x48 lma ffffffff88017650
=>  Loading section .fini, size 0x30 lma ffffffff88017698
=>  Loading section .ctors, size 0x8 lma ffffffff880176c8
=>  Loading section .dtors, size 0x8 lma ffffffff880176d0
=>  Loading section .rdata, size 0x1fd0 lma ffffffff880176e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880196b0
=>  Loading section .data, size 0x5a8 lma ffffffff880196c8
=>  Start address ffffffff88000004
=>  Transfer rate: 844608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/hello.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 335/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:333  W:0    | mipstx39/jmr3904: iostream.exe
Result: invalid   
Time: 0:00:00.519756 iostream.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x956c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880956c0
=>  Loading section .init, size 0x48 lma ffffffff88095740
=>  Loading section .fini, size 0x30 lma ffffffff88095788
=>  Loading section .ctors, size 0x34 lma ffffffff880957b8
=>  Loading section .dtors, size 0x8 lma ffffffff880957ec
=>  Loading section .rdata, size 0xa21c lma ffffffff88095800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8809fa20
=>  Loading section .rel.dyn, size 0x18 lma ffffffff8809fa38
=>  Loading section .data, size 0x718 lma ffffffff8809fa50
=>  Loading section .sdata, size 0x4 lma ffffffff880a0168
=>  Start address ffffffff88000004
=>  Transfer rate: 5245664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/iostream.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 336/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:333  W:0    | mipstx39/jmr3904: minimum.exe
[ 337/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:333  W:0    | mipstx39/jmr3904: nsecs.exe
Result: invalid   
Time: 0:00:00.268790 nsecs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17ee0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017ee0
=>  Loading section .init, size 0x48 lma ffffffff88017f50
=>  Loading section .fini, size 0x30 lma ffffffff88017f98
=>  Loading section .ctors, size 0x8 lma ffffffff88017fc8
=>  Loading section .dtors, size 0x8 lma ffffffff88017fd0
=>  Loading section .rdata, size 0x2764 lma ffffffff88017fe0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a748
=>  Loading section .data, size 0x61c lma ffffffff8801a760
=>  Start address ffffffff88000004
=>  Transfer rate: 879488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/nsecs.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 338/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:331  W:0    | mipstx39/jmr3904: paranoia.exe
Result: invalid   
Time: 0:00:00.318908 paranoia.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22280 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88022280
=>  Loading section .init, size 0x48 lma ffffffff880222f0
=>  Loading section .fini, size 0x30 lma ffffffff88022338
=>  Loading section .ctors, size 0x8 lma ffffffff88022368
=>  Loading section .dtors, size 0x8 lma ffffffff88022370
=>  Loading section .rdata, size 0x5168 lma ffffffff88022380
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880274e8
=>  Loading section .data, size 0x738 lma ffffffff88027500
=>  Start address ffffffff88000004
=>  Transfer rate: 1302912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/paranoia.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 339/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:334  W:0    | mipstx39/jmr3904: ticker.exe
Result: invalid   
Time: 0:00:00.254128 ticker.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880115b0
=>  Loading section .init, size 0x48 lma ffffffff88011620
=>  Loading section .fini, size 0x30 lma ffffffff88011668
=>  Loading section .ctors, size 0x8 lma ffffffff88011698
=>  Loading section .dtors, size 0x8 lma ffffffff880116a0
=>  Loading section .rdata, size 0x2008 lma ffffffff880116b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880136b8
=>  Loading section .data, size 0x5c0 lma ffffffff880136d0
=>  Start address ffffffff88000004
=>  Transfer rate: 648256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/ticker.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 340/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:334  W:0    | mipstx39/jmr3904: unlimited.exe
Result: invalid   
Time: 0:00:00.268354 unlimited.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11de0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011de0
=>  Loading section .init, size 0x48 lma ffffffff88011e50
=>  Loading section .fini, size 0x30 lma ffffffff88011e98
=>  Loading section .ctors, size 0x8 lma ffffffff88011ec8
=>  Loading section .dtors, size 0x8 lma ffffffff88011ed0
=>  Loading section .rdata, size 0x1f3c lma ffffffff88011ee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e20
=>  Loading section .data, size 0x410 lma ffffffff88013e38
=>  Start address ffffffff88000004
=>  Transfer rate: 659936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/samples/unlimited.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 341/1855] p:0    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:334  W:0    | mipstx39/jmr3904: sp01.exe
Result: invalid   
Time: 0:00:00.251606 sp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xb7d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800b7d0
=>  Loading section .init, size 0x48 lma ffffffff8800b830
=>  Loading section .fini, size 0x30 lma ffffffff8800b878
=>  Loading section .ctors, size 0x8 lma ffffffff8800b8a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800b8b0
=>  Loading section .rdata, size 0x1bd4 lma ffffffff8800b8c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800d498
=>  Loading section .data, size 0x1f4 lma ffffffff8800d4b0
=>  Start address ffffffff88000004
=>  Transfer rate: 439488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 342/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:335  W:0    | mipstx39/jmr3904: sp02.exe
Result: invalid   
Time: 0:00:00.252673 sp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11870 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011870
=>  Loading section .init, size 0x48 lma ffffffff880118e0
=>  Loading section .fini, size 0x30 lma ffffffff88011928
=>  Loading section .ctors, size 0x8 lma ffffffff88011958
=>  Loading section .dtors, size 0x8 lma ffffffff88011960
=>  Loading section .rdata, size 0x22e1 lma ffffffff88011970
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c58
=>  Loading section .data, size 0x418 lma ffffffff88013c70
=>  Start address ffffffff88000004
=>  Transfer rate: 656328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 343/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:339  W:0    | mipstx39/jmr3904: sp03.exe
Result: invalid   
Time: 0:00:00.260260 sp03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11a60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011a60
=>  Loading section .init, size 0x48 lma ffffffff88011ad0
=>  Loading section .fini, size 0x30 lma ffffffff88011b18
=>  Loading section .ctors, size 0x8 lma ffffffff88011b48
=>  Loading section .dtors, size 0x8 lma ffffffff88011b50
=>  Loading section .rdata, size 0x20cc lma ffffffff88011b60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013c30
=>  Loading section .data, size 0x440 lma ffffffff88013c48
=>  Start address ffffffff88000004
=>  Transfer rate: 656352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 344/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:341  W:0    | mipstx39/jmr3904: sp04.exe
Result: invalid   
Time: 0:00:00.260011 sp04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13360 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013360
=>  Loading section .init, size 0x48 lma ffffffff880133e0
=>  Loading section .fini, size 0x30 lma ffffffff88013428
=>  Loading section .ctors, size 0x8 lma ffffffff88013458
=>  Loading section .dtors, size 0x8 lma ffffffff88013460
=>  Loading section .rdata, size 0x2334 lma ffffffff88013470
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880157a8
=>  Loading section .data, size 0x610 lma ffffffff880157c0
=>  Start address ffffffff88000004
=>  Transfer rate: 716320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 345/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:341  W:0    | mipstx39/jmr3904: sp05.exe
Result: invalid   
Time: 0:00:00.260049 sp05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ab0
=>  Loading section .init, size 0x48 lma ffffffff88010b20
=>  Loading section .fini, size 0x30 lma ffffffff88010b68
=>  Loading section .ctors, size 0x8 lma ffffffff88010b98
=>  Loading section .dtors, size 0x8 lma ffffffff88010ba0
=>  Loading section .rdata, size 0x2135 lma ffffffff88010bb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ce8
=>  Loading section .data, size 0x418 lma ffffffff88012d00
=>  Start address ffffffff88000004
=>  Transfer rate: 624744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 346/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:341  W:0    | mipstx39/jmr3904: sp06.exe
Result: invalid   
Time: 0:00:00.254844 sp06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c30
=>  Loading section .init, size 0x48 lma ffffffff88010ca0
=>  Loading section .fini, size 0x30 lma ffffffff88010ce8
=>  Loading section .ctors, size 0x8 lma ffffffff88010d18
=>  Loading section .dtors, size 0x8 lma ffffffff88010d20
=>  Loading section .rdata, size 0x1fc1 lma ffffffff88010d30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012cf8
=>  Loading section .data, size 0x418 lma ffffffff88012d10
=>  Start address ffffffff88000004
=>  Transfer rate: 624840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 347/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:341  W:0    | mipstx39/jmr3904: sp07.exe
Result: invalid   
Time: 0:00:00.257582 sp07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12560 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012560
=>  Loading section .init, size 0x48 lma ffffffff880125d0
=>  Loading section .fini, size 0x30 lma ffffffff88012618
=>  Loading section .ctors, size 0x8 lma ffffffff88012648
=>  Loading section .dtors, size 0x8 lma ffffffff88012650
=>  Loading section .rdata, size 0x2680 lma ffffffff88012660
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ce0
=>  Loading section .data, size 0x5e8 lma ffffffff88014cf8
=>  Start address ffffffff88000004
=>  Transfer rate: 693952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 348/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:341  W:0    | mipstx39/jmr3904: sp08.exe
Result: invalid   
Time: 0:00:00.252837 sp08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fb90
=>  Loading section .init, size 0x48 lma ffffffff8800fc00
=>  Loading section .fini, size 0x30 lma ffffffff8800fc48
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc78
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc80
=>  Loading section .rdata, size 0x2119 lma ffffffff8800fc90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011db0
=>  Loading section .data, size 0x408 lma ffffffff88011dc8
=>  Start address ffffffff88000004
=>  Transfer rate: 593416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 349/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:341  W:0    | mipstx39/jmr3904: sp11.exe
Result: invalid   
Time: 0:00:00.255036 sp11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x154d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880154d0
=>  Loading section .init, size 0x48 lma ffffffff88015540
=>  Loading section .fini, size 0x30 lma ffffffff88015588
=>  Loading section .ctors, size 0x8 lma ffffffff880155b8
=>  Loading section .dtors, size 0x8 lma ffffffff880155c0
=>  Loading section .rdata, size 0x3069 lma ffffffff880155d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018640
=>  Loading section .data, size 0x470 lma ffffffff88018658
=>  Start address ffffffff88000004
=>  Transfer rate: 808392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 350/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:341  W:0    | mipstx39/jmr3904: sp12.exe
Result: invalid   
Time: 0:00:00.254547 sp12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014690
=>  Loading section .init, size 0x48 lma ffffffff88014700
=>  Loading section .fini, size 0x30 lma ffffffff88014748
=>  Loading section .ctors, size 0x8 lma ffffffff88014778
=>  Loading section .dtors, size 0x8 lma ffffffff88014780
=>  Loading section .rdata, size 0x2eac lma ffffffff88014790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017640
=>  Loading section .data, size 0x448 lma ffffffff88017658
=>  Start address ffffffff88000004
=>  Transfer rate: 775328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 351/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:342  W:0    | mipstx39/jmr3904: sp13.exe
Result: invalid   
Time: 0:00:00.282314 sp13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x148d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880148d0
=>  Loading section .init, size 0x48 lma ffffffff88014940
=>  Loading section .fini, size 0x30 lma ffffffff88014988
=>  Loading section .ctors, size 0x8 lma ffffffff880149b8
=>  Loading section .dtors, size 0x8 lma ffffffff880149c0
=>  Loading section .rdata, size 0x2c31 lma ffffffff880149d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017608
=>  Loading section .data, size 0x448 lma ffffffff88017620
=>  Start address ffffffff88000004
=>  Transfer rate: 774856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 352/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:349  W:0    | mipstx39/jmr3904: sp14.exe
Result: invalid   
Time: 0:00:00.260059 sp14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880114c0
=>  Loading section .init, size 0x48 lma ffffffff88011530
=>  Loading section .fini, size 0x30 lma ffffffff88011578
=>  Loading section .ctors, size 0x8 lma ffffffff880115a8
=>  Loading section .dtors, size 0x8 lma ffffffff880115b0
=>  Loading section .rdata, size 0x2285 lma ffffffff880115c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013848
=>  Loading section .data, size 0x448 lma ffffffff88013860
=>  Start address ffffffff88000004
=>  Transfer rate: 648424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 353/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:349  W:0    | mipstx39/jmr3904: sp15.exe
Result: invalid   
Time: 0:00:00.252688 sp15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c60
=>  Loading section .init, size 0x48 lma ffffffff88010cd0
=>  Loading section .fini, size 0x30 lma ffffffff88010d18
=>  Loading section .ctors, size 0x8 lma ffffffff88010d48
=>  Loading section .dtors, size 0x8 lma ffffffff88010d50
=>  Loading section .rdata, size 0x2205 lma ffffffff88010d60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f68
=>  Loading section .data, size 0x448 lma ffffffff88012f80
=>  Start address ffffffff88000004
=>  Transfer rate: 630248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 354/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:350  W:0    | mipstx39/jmr3904: sp16.exe
Result: invalid   
Time: 0:00:00.266227 sp16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b30 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013b30
=>  Loading section .init, size 0x48 lma ffffffff88013ba0
=>  Loading section .fini, size 0x30 lma ffffffff88013be8
=>  Loading section .ctors, size 0x8 lma ffffffff88013c18
=>  Loading section .dtors, size 0x8 lma ffffffff88013c20
=>  Loading section .rdata, size 0x2aa1 lma ffffffff88013c30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880166d8
=>  Loading section .data, size 0x448 lma ffffffff880166f0
=>  Start address ffffffff88000004
=>  Transfer rate: 743752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 355/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:350  W:0    | mipstx39/jmr3904: sp17.exe
Result: invalid   
Time: 0:00:00.255468 sp17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10900 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010900
=>  Loading section .init, size 0x48 lma ffffffff88010970
=>  Loading section .fini, size 0x30 lma ffffffff880109b8
=>  Loading section .ctors, size 0x8 lma ffffffff880109e8
=>  Loading section .dtors, size 0x8 lma ffffffff880109f0
=>  Loading section .rdata, size 0x1fa1 lma ffffffff88010a00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129a8
=>  Loading section .data, size 0x418 lma ffffffff880129c0
=>  Start address ffffffff88000004
=>  Transfer rate: 618056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 356/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:350  W:0    | mipstx39/jmr3904: sp18.exe
Result: invalid   
Time: 0:00:00.261359 sp18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfff0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fff0
=>  Loading section .init, size 0x48 lma ffffffff88010060
=>  Loading section .fini, size 0x30 lma ffffffff880100a8
=>  Loading section .ctors, size 0x8 lma ffffffff880100d8
=>  Loading section .dtors, size 0x8 lma ffffffff880100e0
=>  Loading section .rdata, size 0x1ead lma ffffffff880100f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011fa0
=>  Loading section .data, size 0x438 lma ffffffff88011fb8
=>  Start address ffffffff88000004
=>  Transfer rate: 597800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp18.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 357/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:350  W:0    | mipstx39/jmr3904: sp19.exe
Result: invalid   
Time: 0:00:00.254928 sp19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d800 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801d800
=>  Loading section .init, size 0x48 lma ffffffff8801d870
=>  Loading section .fini, size 0x30 lma ffffffff8801d8b8
=>  Loading section .ctors, size 0x8 lma ffffffff8801d8e8
=>  Loading section .dtors, size 0x8 lma ffffffff8801d8f0
=>  Loading section .rdata, size 0x3250 lma ffffffff8801d900
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020b50
=>  Loading section .data, size 0x760 lma ffffffff88020b68
=>  Start address ffffffff88000004
=>  Transfer rate: 1086976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp19.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 358/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:350  W:0    | mipstx39/jmr3904: sp20.exe
Result: invalid   
Time: 0:00:00.252938 sp20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19e60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019e60
=>  Loading section .init, size 0x48 lma ffffffff88019ed0
=>  Loading section .fini, size 0x30 lma ffffffff88019f18
=>  Loading section .ctors, size 0x8 lma ffffffff88019f48
=>  Loading section .dtors, size 0x8 lma ffffffff88019f50
=>  Loading section .rdata, size 0x2680 lma ffffffff88019f60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c5e0
=>  Loading section .data, size 0x5d0 lma ffffffff8801c5f8
=>  Start address ffffffff88000004
=>  Transfer rate: 941568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp20.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 359/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:350  W:0    | mipstx39/jmr3904: sp2038.exe
Result: invalid   
Time: 0:00:00.251525 sp2038.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10300 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010300
=>  Loading section .init, size 0x48 lma ffffffff88010370
=>  Loading section .fini, size 0x30 lma ffffffff880103b8
=>  Loading section .ctors, size 0x8 lma ffffffff880103e8
=>  Loading section .dtors, size 0x8 lma ffffffff880103f0
=>  Loading section .rdata, size 0x1d6d lma ffffffff88010400
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012170
=>  Loading section .data, size 0x440 lma ffffffff88012188
=>  Start address ffffffff88000004
=>  Transfer rate: 601576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp2038.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 360/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:358  W:0    | mipstx39/jmr3904: sp21.exe
Result: invalid   
Time: 0:00:00.251212 sp21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x148e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880148e0
=>  Loading section .init, size 0x48 lma ffffffff88014950
=>  Loading section .fini, size 0x30 lma ffffffff88014998
=>  Loading section .ctors, size 0x8 lma ffffffff880149c8
=>  Loading section .dtors, size 0x8 lma ffffffff880149d0
=>  Loading section .rdata, size 0x2670 lma ffffffff880149e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017050
=>  Loading section .data, size 0x470 lma ffffffff88017068
=>  Start address ffffffff88000004
=>  Transfer rate: 763520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp21.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 361/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:358  W:0    | mipstx39/jmr3904: sp22.exe
Result: invalid   
Time: 0:00:00.257881 sp22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12460 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012460
=>  Loading section .init, size 0x48 lma ffffffff880124d0
=>  Loading section .fini, size 0x30 lma ffffffff88012518
=>  Loading section .ctors, size 0x8 lma ffffffff88012548
=>  Loading section .dtors, size 0x8 lma ffffffff88012550
=>  Loading section .rdata, size 0x232c lma ffffffff88012560
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014890
=>  Loading section .data, size 0x470 lma ffffffff880148a8
=>  Start address ffffffff88000004
=>  Transfer rate: 682080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp22.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 362/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:358  W:0    | mipstx39/jmr3904: sp23.exe
Result: invalid   
Time: 0:00:00.255696 sp23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106a0
=>  Loading section .init, size 0x48 lma ffffffff88010710
=>  Loading section .fini, size 0x30 lma ffffffff88010758
=>  Loading section .ctors, size 0x8 lma ffffffff88010788
=>  Loading section .dtors, size 0x8 lma ffffffff88010790
=>  Loading section .rdata, size 0x1f45 lma ffffffff880107a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880126e8
=>  Loading section .data, size 0x448 lma ffffffff88012700
=>  Start address ffffffff88000004
=>  Transfer rate: 612840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp23.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 363/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:358  W:0    | mipstx39/jmr3904: sp24.exe
Result: invalid   
Time: 0:00:00.305970 sp24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b80
=>  Loading section .init, size 0x48 lma ffffffff88011bf0
=>  Loading section .fini, size 0x30 lma ffffffff88011c38
=>  Loading section .ctors, size 0x8 lma ffffffff88011c68
=>  Loading section .dtors, size 0x8 lma ffffffff88011c70
=>  Loading section .rdata, size 0x209c lma ffffffff88011c80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d20
=>  Loading section .data, size 0x5c0 lma ffffffff88013d38
=>  Start address ffffffff88000004
=>  Transfer rate: 661344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp24.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 364/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:358  W:0    | mipstx39/jmr3904: sp25.exe
Result: invalid   
Time: 0:00:00.276759 sp25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011d60
=>  Loading section .init, size 0x48 lma ffffffff88011dd0
=>  Loading section .fini, size 0x30 lma ffffffff88011e18
=>  Loading section .ctors, size 0x8 lma ffffffff88011e48
=>  Loading section .dtors, size 0x8 lma ffffffff88011e50
=>  Loading section .rdata, size 0x2335 lma ffffffff88011e60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014198
=>  Loading section .data, size 0x448 lma ffffffff880141b0
=>  Start address ffffffff88000004
=>  Transfer rate: 667496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp25.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 365/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:358  W:0    | mipstx39/jmr3904: sp26.exe
Result: invalid   
Time: 0:00:00.264681 sp26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10550 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010550
=>  Loading section .init, size 0x48 lma ffffffff880105c0
=>  Loading section .fini, size 0x30 lma ffffffff88010608
=>  Loading section .ctors, size 0x8 lma ffffffff88010638
=>  Loading section .dtors, size 0x8 lma ffffffff88010640
=>  Loading section .rdata, size 0x1de9 lma ffffffff88010650
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012440
=>  Loading section .data, size 0x418 lma ffffffff88012458
=>  Start address ffffffff88000004
=>  Transfer rate: 606984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp26.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 366/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:358  W:0    | mipstx39/jmr3904: sp27.exe
Result: invalid   
Time: 0:00:00.268925 sp27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110f0
=>  Loading section .init, size 0x48 lma ffffffff88011160
=>  Loading section .fini, size 0x30 lma ffffffff880111a8
=>  Loading section .ctors, size 0x8 lma ffffffff880111d8
=>  Loading section .dtors, size 0x8 lma ffffffff880111e0
=>  Loading section .rdata, size 0x1e99 lma ffffffff880111f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013090
=>  Loading section .data, size 0x448 lma ffffffff880130a8
=>  Start address ffffffff88000004
=>  Transfer rate: 632584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 367/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:358  W:0    | mipstx39/jmr3904: sp27a.exe
Result: invalid   
Time: 0:00:00.255893 sp27a.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110f0
=>  Loading section .init, size 0x48 lma ffffffff88011160
=>  Loading section .fini, size 0x30 lma ffffffff880111a8
=>  Loading section .ctors, size 0x8 lma ffffffff880111d8
=>  Loading section .dtors, size 0x8 lma ffffffff880111e0
=>  Loading section .rdata, size 0x1ea9 lma ffffffff880111f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880130a0
=>  Loading section .data, size 0x448 lma ffffffff880130b8
=>  Start address ffffffff88000004
=>  Transfer rate: 632712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp27a.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 368/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:361  W:0    | mipstx39/jmr3904: sp29.exe
Result: invalid   
Time: 0:00:00.264147 sp29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11830 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011830
=>  Loading section .init, size 0x48 lma ffffffff880118a0
=>  Loading section .fini, size 0x30 lma ffffffff880118e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011918
=>  Loading section .dtors, size 0x8 lma ffffffff88011920
=>  Loading section .rdata, size 0x20d1 lma ffffffff88011930
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a08
=>  Loading section .data, size 0x448 lma ffffffff88013a20
=>  Start address ffffffff88000004
=>  Transfer rate: 651976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp29.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 369/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:362  W:0    | mipstx39/jmr3904: sp30.exe
Result: invalid   
Time: 0:00:00.259898 sp30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12360 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012360
=>  Loading section .init, size 0x48 lma ffffffff880123d0
=>  Loading section .fini, size 0x30 lma ffffffff88012418
=>  Loading section .ctors, size 0x8 lma ffffffff88012448
=>  Loading section .dtors, size 0x8 lma ffffffff88012450
=>  Loading section .rdata, size 0x2198 lma ffffffff88012460
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880145f8
=>  Loading section .data, size 0x5c0 lma ffffffff88014610
=>  Start address ffffffff88000004
=>  Transfer rate: 679488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp30.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 370/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:362  W:0    | mipstx39/jmr3904: sp31.exe
Result: invalid   
Time: 0:00:00.304174 sp31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14850 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014850
=>  Loading section .init, size 0x48 lma ffffffff880148c0
=>  Loading section .fini, size 0x30 lma ffffffff88014908
=>  Loading section .ctors, size 0x8 lma ffffffff88014938
=>  Loading section .dtors, size 0x8 lma ffffffff88014940
=>  Loading section .rdata, size 0x269c lma ffffffff88014950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016ff0
=>  Loading section .data, size 0x470 lma ffffffff88017008
=>  Start address ffffffff88000004
=>  Transfer rate: 762720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp31.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 371/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:362  W:0    | mipstx39/jmr3904: sp32.exe
Result: invalid   
Time: 0:00:00.254957 sp32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b90
=>  Loading section .init, size 0x48 lma ffffffff88010c00
=>  Loading section .fini, size 0x30 lma ffffffff88010c48
=>  Loading section .ctors, size 0x8 lma ffffffff88010c78
=>  Loading section .dtors, size 0x8 lma ffffffff88010c80
=>  Loading section .rdata, size 0x1e41 lma ffffffff88010c90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ad8
=>  Loading section .data, size 0x448 lma ffffffff88012af0
=>  Start address ffffffff88000004
=>  Transfer rate: 620872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp32.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 372/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:370  W:0    | mipstx39/jmr3904: sp33.exe
Result: invalid   
Time: 0:00:00.253742 sp33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11550 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011550
=>  Loading section .init, size 0x48 lma ffffffff880115c0
=>  Loading section .fini, size 0x30 lma ffffffff88011608
=>  Loading section .ctors, size 0x8 lma ffffffff88011638
=>  Loading section .dtors, size 0x8 lma ffffffff88011640
=>  Loading section .rdata, size 0x23cd lma ffffffff88011650
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a20
=>  Loading section .data, size 0x448 lma ffffffff88013a38
=>  Start address ffffffff88000004
=>  Transfer rate: 652200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp33.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 373/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:367  W:0    | mipstx39/jmr3904: sp34.exe
Result: invalid   
Time: 0:00:00.273974 sp34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11890 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011890
=>  Loading section .init, size 0x48 lma ffffffff88011900
=>  Loading section .fini, size 0x30 lma ffffffff88011948
=>  Loading section .ctors, size 0x8 lma ffffffff88011978
=>  Loading section .dtors, size 0x8 lma ffffffff88011980
=>  Loading section .rdata, size 0x1f41 lma ffffffff88011990
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880138d8
=>  Loading section .data, size 0x448 lma ffffffff880138f0
=>  Start address ffffffff88000004
=>  Transfer rate: 649544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp34.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 374/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:369  W:0    | mipstx39/jmr3904: sp35.exe
Result: invalid   
Time: 0:00:00.275657 sp35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17e70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017e70
=>  Loading section .init, size 0x48 lma ffffffff88017ee0
=>  Loading section .fini, size 0x30 lma ffffffff88017f28
=>  Loading section .ctors, size 0x8 lma ffffffff88017f58
=>  Loading section .dtors, size 0x8 lma ffffffff88017f60
=>  Loading section .rdata, size 0x27b0 lma ffffffff88017f70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a720
=>  Loading section .data, size 0x5b4 lma ffffffff8801a738
=>  Start address ffffffff88000004
=>  Transfer rate: 878368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp35.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 375/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:368  W:0    | mipstx39/jmr3904: sp37.exe
Result: invalid   
Time: 0:00:00.310422 sp37.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12f10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012f10
=>  Loading section .init, size 0x48 lma ffffffff88012f80
=>  Loading section .fini, size 0x30 lma ffffffff88012fc8
=>  Loading section .ctors, size 0x8 lma ffffffff88012ff8
=>  Loading section .dtors, size 0x8 lma ffffffff88013000
=>  Loading section .rdata, size 0x2791 lma ffffffff88013010
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880157a8
=>  Loading section .data, size 0x470 lma ffffffff880157c0
=>  Start address ffffffff88000004
=>  Transfer rate: 712968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp37.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 376/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:369  W:0    | mipstx39/jmr3904: sp38.exe
Result: invalid   
Time: 0:00:00.253016 sp38.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10710 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010710
=>  Loading section .init, size 0x48 lma ffffffff88010780
=>  Loading section .fini, size 0x30 lma ffffffff880107c8
=>  Loading section .ctors, size 0x8 lma ffffffff880107f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010800
=>  Loading section .rdata, size 0x1e4d lma ffffffff88010810
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012660
=>  Loading section .data, size 0x448 lma ffffffff88012678
=>  Start address ffffffff88000004
=>  Transfer rate: 611752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp38.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 377/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:369  W:0    | mipstx39/jmr3904: sp40.exe
Result: invalid   
Time: 0:00:00.273888 sp40.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10860 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010860
=>  Loading section .init, size 0x48 lma ffffffff880108d0
=>  Loading section .fini, size 0x30 lma ffffffff88010918
=>  Loading section .ctors, size 0x8 lma ffffffff88010948
=>  Loading section .dtors, size 0x8 lma ffffffff88010950
=>  Loading section .rdata, size 0x20ad lma ffffffff88010960
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a10
=>  Loading section .data, size 0x460 lma ffffffff88012a28
=>  Start address ffffffff88000004
=>  Transfer rate: 619496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp40.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 378/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:370  W:0    | mipstx39/jmr3904: sp41.exe
Result: invalid   
Time: 0:00:00.270262 sp41.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe60
=>  Loading section .init, size 0x48 lma ffffffff8800fed0
=>  Loading section .fini, size 0x30 lma ffffffff8800ff18
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff48
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff50
=>  Loading section .rdata, size 0x1ab5 lma ffffffff8800ff60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a18
=>  Loading section .data, size 0x418 lma ffffffff88011a30
=>  Start address ffffffff88000004
=>  Transfer rate: 586216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp41.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 379/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:370  W:0    | mipstx39/jmr3904: sp42.exe
Result: invalid   
Time: 0:00:00.262004 sp42.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12970 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012970
=>  Loading section .init, size 0x48 lma ffffffff880129e0
=>  Loading section .fini, size 0x30 lma ffffffff88012a28
=>  Loading section .ctors, size 0x8 lma ffffffff88012a58
=>  Loading section .dtors, size 0x8 lma ffffffff88012a60
=>  Loading section .rdata, size 0x22ac lma ffffffff88012a70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014d20
=>  Loading section .data, size 0x598 lma ffffffff88014d38
=>  Start address ffffffff88000004
=>  Transfer rate: 693792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp42.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 380/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:376  W:0    | mipstx39/jmr3904: sp43.exe
Result: invalid   
Time: 0:00:00.256797 sp43.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x128e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880128e0
=>  Loading section .init, size 0x48 lma ffffffff88012950
=>  Loading section .fini, size 0x30 lma ffffffff88012998
=>  Loading section .ctors, size 0x8 lma ffffffff880129c8
=>  Loading section .dtors, size 0x8 lma ffffffff880129d0
=>  Loading section .rdata, size 0x2f80 lma ffffffff880129e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015960
=>  Loading section .data, size 0x478 lma ffffffff88015978
=>  Start address ffffffff88000004
=>  Transfer rate: 716608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp43.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 381/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:378  W:0    | mipstx39/jmr3904: sp44.exe
Result: invalid   
Time: 0:00:00.257303 sp44.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105a0
=>  Loading section .init, size 0x48 lma ffffffff88010610
=>  Loading section .fini, size 0x30 lma ffffffff88010658
=>  Loading section .ctors, size 0x8 lma ffffffff88010688
=>  Loading section .dtors, size 0x8 lma ffffffff88010690
=>  Loading section .rdata, size 0x1e21 lma ffffffff880106a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880124c8
=>  Loading section .data, size 0x418 lma ffffffff880124e0
=>  Start address ffffffff88000004
=>  Transfer rate: 608072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp44.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 382/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:378  W:0    | mipstx39/jmr3904: sp45.exe
Result: invalid   
Time: 0:00:00.253439 sp45.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10bd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010bd0
=>  Loading section .init, size 0x48 lma ffffffff88010c40
=>  Loading section .fini, size 0x30 lma ffffffff88010c88
=>  Loading section .ctors, size 0x8 lma ffffffff88010cb8
=>  Loading section .dtors, size 0x8 lma ffffffff88010cc0
=>  Loading section .rdata, size 0x1fb5 lma ffffffff88010cd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c88
=>  Loading section .data, size 0x448 lma ffffffff88012ca0
=>  Start address ffffffff88000004
=>  Transfer rate: 624360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp45.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 383/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:378  W:0    | mipstx39/jmr3904: sp46.exe
Result: invalid   
Time: 0:00:00.254666 sp46.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c80
=>  Loading section .init, size 0x48 lma ffffffff88010cf0
=>  Loading section .fini, size 0x30 lma ffffffff88010d38
=>  Loading section .ctors, size 0x8 lma ffffffff88010d68
=>  Loading section .dtors, size 0x8 lma ffffffff88010d70
=>  Loading section .rdata, size 0x1e65 lma ffffffff88010d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012be8
=>  Loading section .data, size 0x448 lma ffffffff88012c00
=>  Start address ffffffff88000004
=>  Transfer rate: 623080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp46.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 384/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:378  W:0    | mipstx39/jmr3904: sp47.exe
Result: invalid   
Time: 0:00:00.252291 sp47.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x101f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880101f0
=>  Loading section .init, size 0x48 lma ffffffff88010260
=>  Loading section .fini, size 0x30 lma ffffffff880102a8
=>  Loading section .ctors, size 0x8 lma ffffffff880102d8
=>  Loading section .dtors, size 0x8 lma ffffffff880102e0
=>  Loading section .rdata, size 0x1a01 lma ffffffff880102f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cf8
=>  Loading section .data, size 0x418 lma ffffffff88011d10
=>  Start address ffffffff88000004
=>  Transfer rate: 592072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp47.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 385/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:378  W:0    | mipstx39/jmr3904: sp48.exe
Result: invalid   
Time: 0:00:00.253275 sp48.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880102d0
=>  Loading section .init, size 0x48 lma ffffffff88010340
=>  Loading section .fini, size 0x30 lma ffffffff88010388
=>  Loading section .ctors, size 0x8 lma ffffffff880103b8
=>  Loading section .dtors, size 0x8 lma ffffffff880103c0
=>  Loading section .rdata, size 0x1eb0 lma ffffffff880103d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012280
=>  Loading section .data, size 0x438 lma ffffffff88012298
=>  Start address ffffffff88000004
=>  Transfer rate: 603712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp48.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 386/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:379  W:0    | mipstx39/jmr3904: sp49.exe
Result: invalid   
Time: 0:00:00.254277 sp49.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fa70
=>  Loading section .init, size 0x48 lma ffffffff8800fae0
=>  Loading section .fini, size 0x30 lma ffffffff8800fb28
=>  Loading section .ctors, size 0x8 lma ffffffff8800fb58
=>  Loading section .dtors, size 0x8 lma ffffffff8800fb60
=>  Loading section .rdata, size 0x1e2d lma ffffffff8800fb70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880119a0
=>  Loading section .data, size 0x438 lma ffffffff880119b8
=>  Start address ffffffff88000004
=>  Transfer rate: 585512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp49.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 387/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:380  W:0    | mipstx39/jmr3904: sp50.exe
Result: invalid   
Time: 0:00:00.253502 sp50.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010b20
=>  Loading section .init, size 0x48 lma ffffffff88010b90
=>  Loading section .fini, size 0x30 lma ffffffff88010bd8
=>  Loading section .ctors, size 0x8 lma ffffffff88010c08
=>  Loading section .dtors, size 0x8 lma ffffffff88010c10
=>  Loading section .rdata, size 0x1e01 lma ffffffff88010c20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012a28
=>  Loading section .data, size 0x448 lma ffffffff88012a40
=>  Start address ffffffff88000004
=>  Transfer rate: 619464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp50.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 388/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:381  W:0    | mipstx39/jmr3904: sp51.exe
Result: invalid   
Time: 0:00:00.277380 sp51.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c20
=>  Loading section .init, size 0x48 lma ffffffff88010c90
=>  Loading section .fini, size 0x30 lma ffffffff88010cd8
=>  Loading section .ctors, size 0x8 lma ffffffff88010d08
=>  Loading section .dtors, size 0x8 lma ffffffff88010d10
=>  Loading section .rdata, size 0x1f45 lma ffffffff88010d20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c68
=>  Loading section .data, size 0x438 lma ffffffff88012c80
=>  Start address ffffffff88000004
=>  Transfer rate: 623976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp51.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 389/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:385  W:0    | mipstx39/jmr3904: sp52.exe
Result: invalid   
Time: 0:00:00.257375 sp52.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11290 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011290
=>  Loading section .init, size 0x48 lma ffffffff88011300
=>  Loading section .fini, size 0x30 lma ffffffff88011348
=>  Loading section .ctors, size 0x8 lma ffffffff88011378
=>  Loading section .dtors, size 0x8 lma ffffffff88011380
=>  Loading section .rdata, size 0x1f41 lma ffffffff88011390
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880132d8
=>  Loading section .data, size 0x470 lma ffffffff880132f0
=>  Start address ffffffff88000004
=>  Transfer rate: 637576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp52.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 390/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:386  W:0    | mipstx39/jmr3904: sp53.exe
Result: invalid   
Time: 0:00:00.255124 sp53.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11940 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011940
=>  Loading section .init, size 0x48 lma ffffffff880119b0
=>  Loading section .fini, size 0x30 lma ffffffff880119f8
=>  Loading section .ctors, size 0x8 lma ffffffff88011a28
=>  Loading section .dtors, size 0x8 lma ffffffff88011a30
=>  Loading section .rdata, size 0x1f69 lma ffffffff88011a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139b0
=>  Loading section .data, size 0x470 lma ffffffff880139c8
=>  Start address ffffffff88000004
=>  Transfer rate: 651592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp53.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 391/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:387  W:0    | mipstx39/jmr3904: sp54.exe
Result: invalid   
Time: 0:00:00.510488 sp54.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf090 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f090
=>  Loading section .init, size 0x48 lma ffffffff8800f100
=>  Loading section .fini, size 0x30 lma ffffffff8800f148
=>  Loading section .ctors, size 0x8 lma ffffffff8800f178
=>  Loading section .dtors, size 0x8 lma ffffffff8800f180
=>  Loading section .rdata, size 0x1e44 lma ffffffff8800f190
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010fd8
=>  Loading section .data, size 0x548 lma ffffffff88010ff0
=>  Start address ffffffff88000004
=>  Transfer rate: 567648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp54.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 392/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:387  W:0    | mipstx39/jmr3904: sp55.exe
Result: invalid   
Time: 0:00:00.254737 sp55.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10310 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010310
=>  Loading section .init, size 0x48 lma ffffffff88010380
=>  Loading section .fini, size 0x30 lma ffffffff880103c8
=>  Loading section .ctors, size 0x8 lma ffffffff880103f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010400
=>  Loading section .rdata, size 0x1f0d lma ffffffff88010410
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012320
=>  Loading section .data, size 0x438 lma ffffffff88012338
=>  Start address ffffffff88000004
=>  Transfer rate: 604968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp55.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 393/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:387  W:0    | mipstx39/jmr3904: sp56.exe
Result: invalid   
Time: 0:00:00.258328 sp56.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf580 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f580
=>  Loading section .init, size 0x48 lma ffffffff8800f5f0
=>  Loading section .fini, size 0x30 lma ffffffff8800f638
=>  Loading section .ctors, size 0x8 lma ffffffff8800f668
=>  Loading section .dtors, size 0x8 lma ffffffff8800f670
=>  Loading section .rdata, size 0x1e41 lma ffffffff8800f680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880114c8
=>  Loading section .data, size 0x458 lma ffffffff880114e0
=>  Start address ffffffff88000004
=>  Transfer rate: 575816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp56.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 394/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:387  W:0    | mipstx39/jmr3904: sp57.exe
Result: invalid   
Time: 0:00:00.262814 sp57.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010400
=>  Loading section .init, size 0x48 lma ffffffff88010470
=>  Loading section .fini, size 0x30 lma ffffffff880104b8
=>  Loading section .ctors, size 0x8 lma ffffffff880104e8
=>  Loading section .dtors, size 0x8 lma ffffffff880104f0
=>  Loading section .rdata, size 0x1ee5 lma ffffffff88010500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123e8
=>  Loading section .data, size 0x418 lma ffffffff88012400
=>  Start address ffffffff88000004
=>  Transfer rate: 606312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp57.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 395/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:387  W:0    | mipstx39/jmr3904: sp58.exe
Result: invalid   
Time: 0:00:00.287275 sp58.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf320 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f320
=>  Loading section .init, size 0x48 lma ffffffff8800f390
=>  Loading section .fini, size 0x30 lma ffffffff8800f3d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f408
=>  Loading section .dtors, size 0x8 lma ffffffff8800f410
=>  Loading section .rdata, size 0x1a39 lma ffffffff8800f420
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010e60
=>  Loading section .data, size 0x408 lma ffffffff88010e78
=>  Start address ffffffff88000004
=>  Transfer rate: 562056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp58.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 396/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:387  W:0    | mipstx39/jmr3904: sp59.exe
Result: invalid   
Time: 0:00:00.309580 sp59.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e60
=>  Loading section .init, size 0x48 lma ffffffff88010ed0
=>  Loading section .fini, size 0x30 lma ffffffff88010f18
=>  Loading section .ctors, size 0x8 lma ffffffff88010f48
=>  Loading section .dtors, size 0x8 lma ffffffff88010f50
=>  Loading section .rdata, size 0x2041 lma ffffffff88010f60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012fa8
=>  Loading section .data, size 0x448 lma ffffffff88012fc0
=>  Start address ffffffff88000004
=>  Transfer rate: 630728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp59.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 397/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:389  W:0    | mipstx39/jmr3904: sp60.exe
Result: invalid   
Time: 0:00:00.273864 sp60.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10910 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010910
=>  Loading section .init, size 0x48 lma ffffffff88010980
=>  Loading section .fini, size 0x30 lma ffffffff880109c8
=>  Loading section .ctors, size 0x8 lma ffffffff880109f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010a00
=>  Loading section .rdata, size 0x1f25 lma ffffffff88010a10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012938
=>  Loading section .data, size 0x448 lma ffffffff88012950
=>  Start address ffffffff88000004
=>  Transfer rate: 617576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp60.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 398/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:389  W:0    | mipstx39/jmr3904: sp62.exe
Result: invalid   
Time: 0:00:00.254356 sp62.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011a70
=>  Loading section .init, size 0x48 lma ffffffff88011ae0
=>  Loading section .fini, size 0x30 lma ffffffff88011b28
=>  Loading section .ctors, size 0x8 lma ffffffff88011b58
=>  Loading section .dtors, size 0x8 lma ffffffff88011b60
=>  Loading section .rdata, size 0x2038 lma ffffffff88011b70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ba8
=>  Loading section .data, size 0x454 lma ffffffff88013bc0
=>  Start address ffffffff88000004
=>  Transfer rate: 655456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp62.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 399/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:396  W:0    | mipstx39/jmr3904: sp63.exe
Result: invalid   
Time: 0:00:00.257447 sp63.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf520 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f520
=>  Loading section .init, size 0x48 lma ffffffff8800f590
=>  Loading section .fini, size 0x30 lma ffffffff8800f5d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f608
=>  Loading section .dtors, size 0x8 lma ffffffff8800f610
=>  Loading section .rdata, size 0x1af9 lma ffffffff8800f620
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011120
=>  Loading section .data, size 0x408 lma ffffffff88011138
=>  Start address ffffffff88000004
=>  Transfer rate: 567688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp63.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 400/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:397  W:0    | mipstx39/jmr3904: sp64.exe
Result: invalid   
Time: 0:00:00.297497 sp64.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107c0
=>  Loading section .init, size 0x48 lma ffffffff88010830
=>  Loading section .fini, size 0x30 lma ffffffff88010878
=>  Loading section .ctors, size 0x8 lma ffffffff880108a8
=>  Loading section .dtors, size 0x8 lma ffffffff880108b0
=>  Loading section .rdata, size 0x1b41 lma ffffffff880108c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012408
=>  Loading section .data, size 0x468 lma ffffffff88012420
=>  Start address ffffffff88000004
=>  Transfer rate: 607176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp64.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 401/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:397  W:0    | mipstx39/jmr3904: sp65.exe
Result: invalid   
Time: 0:00:00.347311 sp65.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x121e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880121e0
=>  Loading section .init, size 0x48 lma ffffffff88012250
=>  Loading section .fini, size 0x30 lma ffffffff88012298
=>  Loading section .ctors, size 0x8 lma ffffffff880122c8
=>  Loading section .dtors, size 0x8 lma ffffffff880122d0
=>  Loading section .rdata, size 0x1f10 lma ffffffff880122e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880141f0
=>  Loading section .data, size 0x454 lma ffffffff88014208
=>  Start address ffffffff88000004
=>  Transfer rate: 668320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp65.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 402/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:397  W:0    | mipstx39/jmr3904: sp66.exe
Result: invalid   
Time: 0:00:00.256581 sp66.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x121f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880121f0
=>  Loading section .init, size 0x48 lma ffffffff88012260
=>  Loading section .fini, size 0x30 lma ffffffff880122a8
=>  Loading section .ctors, size 0x8 lma ffffffff880122d8
=>  Loading section .dtors, size 0x8 lma ffffffff880122e0
=>  Loading section .rdata, size 0x1f18 lma ffffffff880122f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014208
=>  Loading section .data, size 0x454 lma ffffffff88014220
=>  Start address ffffffff88000004
=>  Transfer rate: 668512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp66.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 403/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:397  W:0    | mipstx39/jmr3904: sp67.exe
Result: invalid   
Time: 0:00:00.285025 sp67.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10970 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010970
=>  Loading section .init, size 0x48 lma ffffffff880109e0
=>  Loading section .fini, size 0x30 lma ffffffff88010a28
=>  Loading section .ctors, size 0x8 lma ffffffff88010a58
=>  Loading section .dtors, size 0x8 lma ffffffff88010a60
=>  Loading section .rdata, size 0x1ed5 lma ffffffff88010a70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012948
=>  Loading section .data, size 0x448 lma ffffffff88012960
=>  Start address ffffffff88000004
=>  Transfer rate: 617704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp67.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 404/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:397  W:0    | mipstx39/jmr3904: sp68.exe
Result: invalid   
Time: 0:00:00.257332 sp68.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13f60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013f60
=>  Loading section .init, size 0x48 lma ffffffff88013fe0
=>  Loading section .fini, size 0x30 lma ffffffff88014028
=>  Loading section .ctors, size 0x8 lma ffffffff88014058
=>  Loading section .dtors, size 0x8 lma ffffffff88014060
=>  Loading section .rdata, size 0x229d lma ffffffff88014070
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016310
=>  Loading section .data, size 0x508 lma ffffffff88016328
=>  Start address ffffffff88000004
=>  Transfer rate: 737576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp68.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 405/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:397  W:0    | mipstx39/jmr3904: sp69.exe
Result: invalid   
Time: 0:00:00.255913 sp69.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11290 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011290
=>  Loading section .init, size 0x48 lma ffffffff88011300
=>  Loading section .fini, size 0x30 lma ffffffff88011348
=>  Loading section .ctors, size 0x8 lma ffffffff88011378
=>  Loading section .dtors, size 0x8 lma ffffffff88011380
=>  Loading section .rdata, size 0x226d lma ffffffff88011390
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013600
=>  Loading section .data, size 0x448 lma ffffffff88013618
=>  Start address ffffffff88000004
=>  Transfer rate: 643752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp69.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 406/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:397  W:0    | mipstx39/jmr3904: sp70.exe
Result: invalid   
Time: 0:00:00.298436 sp70.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10940 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010940
=>  Loading section .init, size 0x48 lma ffffffff880109b0
=>  Loading section .fini, size 0x30 lma ffffffff880109f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010a28
=>  Loading section .dtors, size 0x8 lma ffffffff88010a30
=>  Loading section .rdata, size 0x1dd4 lma ffffffff88010a40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012818
=>  Loading section .data, size 0x418 lma ffffffff88012830
=>  Start address ffffffff88000004
=>  Transfer rate: 614880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp70.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 407/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:403  W:0    | mipstx39/jmr3904: sp71.exe
Result: invalid   
Time: 0:00:00.315178 sp71.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf830 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f830
=>  Loading section .init, size 0x48 lma ffffffff8800f8a0
=>  Loading section .fini, size 0x30 lma ffffffff8800f8e8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f918
=>  Loading section .dtors, size 0x8 lma ffffffff8800f920
=>  Loading section .rdata, size 0x1de4 lma ffffffff8800f930
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011718
=>  Loading section .data, size 0x438 lma ffffffff88011730
=>  Start address ffffffff88000004
=>  Transfer rate: 580320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp71.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 408/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:403  W:0    | mipstx39/jmr3904: sp72.exe
Result: invalid   
Time: 0:00:00.253540 sp72.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880111d0
=>  Loading section .init, size 0x48 lma ffffffff88011240
=>  Loading section .fini, size 0x30 lma ffffffff88011288
=>  Loading section .ctors, size 0x8 lma ffffffff880112b8
=>  Loading section .dtors, size 0x8 lma ffffffff880112c0
=>  Loading section .rdata, size 0x1eb9 lma ffffffff880112d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013190
=>  Loading section .data, size 0x448 lma ffffffff880131a8
=>  Start address ffffffff88000004
=>  Transfer rate: 634632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp72.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 409/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:404  W:0    | mipstx39/jmr3904: sp73.exe
Result: invalid   
Time: 0:00:00.257852 sp73.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x112c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880112c0
=>  Loading section .init, size 0x48 lma ffffffff88011330
=>  Loading section .fini, size 0x30 lma ffffffff88011378
=>  Loading section .ctors, size 0x8 lma ffffffff880113a8
=>  Loading section .dtors, size 0x8 lma ffffffff880113b0
=>  Loading section .rdata, size 0x1fd4 lma ffffffff880113c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013398
=>  Loading section .data, size 0x440 lma ffffffff880133b0
=>  Start address ffffffff88000004
=>  Transfer rate: 638752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp73.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 410/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:403  W:0    | mipstx39/jmr3904: sp74.exe
Result: invalid   
Time: 0:00:00.253445 sp74.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf280 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f280
=>  Loading section .init, size 0x48 lma ffffffff8800f2f0
=>  Loading section .fini, size 0x30 lma ffffffff8800f338
=>  Loading section .ctors, size 0x8 lma ffffffff8800f368
=>  Loading section .dtors, size 0x8 lma ffffffff8800f370
=>  Loading section .rdata, size 0x1e11 lma ffffffff8800f380
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011198
=>  Loading section .data, size 0x408 lma ffffffff880111b0
=>  Start address ffffffff88000004
=>  Transfer rate: 568648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp74.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 411/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:405  W:0    | mipstx39/jmr3904: sp75.exe
Result: invalid   
Time: 0:00:00.258253 sp75.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10aa0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010aa0
=>  Loading section .init, size 0x48 lma ffffffff88010b10
=>  Loading section .fini, size 0x30 lma ffffffff88010b58
=>  Loading section .ctors, size 0x8 lma ffffffff88010b88
=>  Loading section .dtors, size 0x8 lma ffffffff88010b90
=>  Loading section .rdata, size 0x1e11 lma ffffffff88010ba0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880129b8
=>  Loading section .data, size 0x448 lma ffffffff880129d0
=>  Start address ffffffff88000004
=>  Transfer rate: 618568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp75.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 412/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:403  W:0    | mipstx39/jmr3904: sp76.exe
Result: invalid   
Time: 0:00:00.292644 sp76.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfbb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fbb0
=>  Loading section .init, size 0x48 lma ffffffff8800fc20
=>  Loading section .fini, size 0x30 lma ffffffff8800fc68
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc98
=>  Loading section .dtors, size 0x8 lma ffffffff8800fca0
=>  Loading section .rdata, size 0x1fc8 lma ffffffff8800fcb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c78
=>  Loading section .data, size 0x408 lma ffffffff88011c90
=>  Start address ffffffff88000004
=>  Transfer rate: 590976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp76.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 413/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:405  W:0    | mipstx39/jmr3904: sp77.exe
Result: invalid   
Time: 0:00:00.252805 sp77.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1d0d lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012220
=>  Loading section .data, size 0x448 lma ffffffff88012238
=>  Start address ffffffff88000004
=>  Transfer rate: 603048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sp77.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 414/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:405  W:0    | mipstx39/jmr3904: spassoc01.exe
Result: invalid   
Time: 0:00:00.257862 spassoc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10cd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010cd0
=>  Loading section .init, size 0x48 lma ffffffff88010d40
=>  Loading section .fini, size 0x30 lma ffffffff88010d88
=>  Loading section .ctors, size 0x8 lma ffffffff88010db8
=>  Loading section .dtors, size 0x8 lma ffffffff88010dc0
=>  Loading section .rdata, size 0x21a9 lma ffffffff88010dd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012f80
=>  Loading section .data, size 0x440 lma ffffffff88012f98
=>  Start address ffffffff88000004
=>  Transfer rate: 630344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spassoc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 415/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:413  W:0    | mipstx39/jmr3904: spatomic01.exe
Result: invalid   
Time: 0:00:00.262863 spatomic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fc80
=>  Loading section .init, size 0x48 lma ffffffff8800fcf0
=>  Loading section .fini, size 0x30 lma ffffffff8800fd38
=>  Loading section .ctors, size 0x8 lma ffffffff8800fd68
=>  Loading section .dtors, size 0x8 lma ffffffff8800fd70
=>  Loading section .rdata, size 0x1d05 lma ffffffff8800fd80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a88
=>  Loading section .data, size 0x410 lma ffffffff88011aa0
=>  Start address ffffffff88000004
=>  Transfer rate: 587048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spatomic01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 416/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:413  W:0    | mipstx39/jmr3904: spcache01.exe
Result: invalid   
Time: 0:00:00.255554 spcache01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x120b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880120b0
=>  Loading section .init, size 0x48 lma ffffffff88012120
=>  Loading section .fini, size 0x30 lma ffffffff88012168
=>  Loading section .ctors, size 0x8 lma ffffffff88012198
=>  Loading section .dtors, size 0x8 lma ffffffff880121a0
=>  Loading section .rdata, size 0x2145 lma ffffffff880121b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880142f8
=>  Loading section .data, size 0x418 lma ffffffff88014310
=>  Start address ffffffff88000004
=>  Transfer rate: 669928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcache01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 417/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:413  W:0    | mipstx39/jmr3904: spcbssched01.exe
Result: invalid   
Time: 0:00:00.261615 spcbssched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11820 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011820
=>  Loading section .init, size 0x48 lma ffffffff88011890
=>  Loading section .fini, size 0x30 lma ffffffff880118d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011908
=>  Loading section .dtors, size 0x8 lma ffffffff88011910
=>  Loading section .rdata, size 0x20a8 lma ffffffff88011920
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880139c8
=>  Loading section .data, size 0x5c0 lma ffffffff880139e0
=>  Start address ffffffff88000004
=>  Transfer rate: 654528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 418/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:413  W:0    | mipstx39/jmr3904: spcbssched02.exe
Result: invalid   
Time: 0:00:00.255554 spcbssched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013270
=>  Loading section .init, size 0x48 lma ffffffff880132e0
=>  Loading section .fini, size 0x30 lma ffffffff88013328
=>  Loading section .ctors, size 0x8 lma ffffffff88013358
=>  Loading section .dtors, size 0x8 lma ffffffff88013360
=>  Loading section .rdata, size 0x2685 lma ffffffff88013370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880159f8
=>  Loading section .data, size 0x458 lma ffffffff88015a10
=>  Start address ffffffff88000004
=>  Transfer rate: 717544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 419/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:413  W:0    | mipstx39/jmr3904: spcbssched03.exe
Result: invalid   
Time: 0:00:00.262125 spcbssched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12d00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012d00
=>  Loading section .init, size 0x48 lma ffffffff88012d70
=>  Loading section .fini, size 0x30 lma ffffffff88012db8
=>  Loading section .ctors, size 0x8 lma ffffffff88012de8
=>  Loading section .dtors, size 0x8 lma ffffffff88012df0
=>  Loading section .rdata, size 0x21d4 lma ffffffff88012e00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014fd8
=>  Loading section .data, size 0x4c0 lma ffffffff88014ff0
=>  Start address ffffffff88000004
=>  Transfer rate: 697632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcbssched03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 420/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:413  W:0    | mipstx39/jmr3904: spchain.exe
Result: invalid   
Time: 0:00:00.267657 spchain.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880115d0
=>  Loading section .init, size 0x48 lma ffffffff88011640
=>  Loading section .fini, size 0x30 lma ffffffff88011688
=>  Loading section .ctors, size 0x8 lma ffffffff880116b8
=>  Loading section .dtors, size 0x8 lma ffffffff880116c0
=>  Loading section .rdata, size 0x2145 lma ffffffff880116d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013818
=>  Loading section .data, size 0x438 lma ffffffff88013830
=>  Start address ffffffff88000004
=>  Transfer rate: 647912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spchain.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 421/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:413  W:0    | mipstx39/jmr3904: spclock_err01.exe
Result: invalid   
Time: 0:00:00.258045 spclock_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b90
=>  Loading section .init, size 0x48 lma ffffffff88011c00
=>  Loading section .fini, size 0x30 lma ffffffff88011c48
=>  Loading section .ctors, size 0x8 lma ffffffff88011c78
=>  Loading section .dtors, size 0x8 lma ffffffff88011c80
=>  Loading section .rdata, size 0x242d lma ffffffff88011c90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140c0
=>  Loading section .data, size 0x440 lma ffffffff880140d8
=>  Start address ffffffff88000004
=>  Transfer rate: 665704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 422/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:413  W:0    | mipstx39/jmr3904: spclock_err02.exe
Result: invalid   
Time: 0:00:00.272617 spclock_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x116c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880116c0
=>  Loading section .init, size 0x48 lma ffffffff88011730
=>  Loading section .fini, size 0x30 lma ffffffff88011778
=>  Loading section .ctors, size 0x8 lma ffffffff880117a8
=>  Loading section .dtors, size 0x8 lma ffffffff880117b0
=>  Loading section .rdata, size 0x20b9 lma ffffffff880117c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013880
=>  Loading section .data, size 0x440 lma ffffffff88013898
=>  Start address ffffffff88000004
=>  Transfer rate: 648776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 423/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:419  W:0    | mipstx39/jmr3904: spclock_todhook01.exe
Result: invalid   
Time: 0:00:00.251663 spclock_todhook01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15d70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015d70
=>  Loading section .init, size 0x48 lma ffffffff88015de0
=>  Loading section .fini, size 0x30 lma ffffffff88015e28
=>  Loading section .ctors, size 0x8 lma ffffffff88015e58
=>  Loading section .dtors, size 0x8 lma ffffffff88015e60
=>  Loading section .rdata, size 0x261c lma ffffffff88015e70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018490
=>  Loading section .data, size 0x7a0 lma ffffffff880184a8
=>  Start address ffffffff88000004
=>  Transfer rate: 811488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spclock_todhook01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 424/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:420  W:0    | mipstx39/jmr3904: spconfig01.exe
Result: invalid   
Time: 0:00:00.253767 spconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeea0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800eea0
=>  Loading section .init, size 0x48 lma ffffffff8800ef10
=>  Loading section .fini, size 0x30 lma ffffffff8800ef58
=>  Loading section .ctors, size 0x8 lma ffffffff8800ef88
=>  Loading section .dtors, size 0x8 lma ffffffff8800ef90
=>  Loading section .rdata, size 0x1a09 lma ffffffff8800efa0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880109b0
=>  Loading section .data, size 0x49c lma ffffffff880109c8
=>  Start address ffffffff88000004
=>  Transfer rate: 553640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 425/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:420  W:0    | mipstx39/jmr3904: spconfig02.exe
Result: invalid   
Time: 0:00:00.264642 spconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xbfb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800bfb0
=>  Loading section .init, size 0x48 lma ffffffff8800c030
=>  Loading section .fini, size 0x30 lma ffffffff8800c078
=>  Loading section .ctors, size 0x8 lma ffffffff8800c0a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800c0b0
=>  Loading section .rdata, size 0x15b8 lma ffffffff8800c0c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800d678
=>  Loading section .data, size 0x334 lma ffffffff8800d690
=>  Start address ffffffff88000004
=>  Transfer rate: 445920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 426/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:421  W:0    | mipstx39/jmr3904: spconsole01.exe
Result: invalid   
Time: 0:00:00.255802 spconsole01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e680 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8801e680
=>  Loading section .init, size 0x48 lma ffffffff8801e6f0
=>  Loading section .fini, size 0x30 lma ffffffff8801e738
=>  Loading section .ctors, size 0x8 lma ffffffff8801e768
=>  Loading section .dtors, size 0x8 lma ffffffff8801e770
=>  Loading section .rdata, size 0x2414 lma ffffffff8801e780
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88020b98
=>  Loading section .data, size 0x5ec lma ffffffff88020bb0
=>  Start address ffffffff88000004
=>  Transfer rate: 1084544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spconsole01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 427/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:421  W:0    | mipstx39/jmr3904: spcontext01.exe
Result: invalid   
Time: 0:00:00.252563 spcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110c0
=>  Loading section .init, size 0x48 lma ffffffff88011130
=>  Loading section .fini, size 0x30 lma ffffffff88011178
=>  Loading section .ctors, size 0x8 lma ffffffff880111a8
=>  Loading section .dtors, size 0x8 lma ffffffff880111b0
=>  Loading section .rdata, size 0x1a3d lma ffffffff880111c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c00
=>  Loading section .data, size 0x448 lma ffffffff88012c18
=>  Start address ffffffff88000004
=>  Transfer rate: 623272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 428/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:421  W:0    | mipstx39/jmr3904: spcpucounter01.exe
Result: invalid   
Time: 0:00:00.257427 spcpucounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18970 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018970
=>  Loading section .init, size 0x48 lma ffffffff880189e0
=>  Loading section .fini, size 0x30 lma ffffffff88018a28
=>  Loading section .ctors, size 0x8 lma ffffffff88018a58
=>  Loading section .dtors, size 0x8 lma ffffffff88018a60
=>  Loading section .rdata, size 0x2290 lma ffffffff88018a70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ad00
=>  Loading section .data, size 0x5b8 lma ffffffff8801ad18
=>  Start address ffffffff88000004
=>  Transfer rate: 890432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpucounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 429/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:422  W:0    | mipstx39/jmr3904: spcpuset01.exe
Result: invalid   
Time: 0:00:00.273651 spcpuset01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf7a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f7a0
=>  Loading section .init, size 0x48 lma ffffffff8800f810
=>  Loading section .fini, size 0x30 lma ffffffff8800f858
=>  Loading section .ctors, size 0x8 lma ffffffff8800f888
=>  Loading section .dtors, size 0x8 lma ffffffff8800f890
=>  Loading section .rdata, size 0x1b49 lma ffffffff8800f8a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880113f0
=>  Loading section .data, size 0x408 lma ffffffff88011408
=>  Start address ffffffff88000004
=>  Transfer rate: 573448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcpuset01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 430/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:423  W:0    | mipstx39/jmr3904: spcxx01.exe
Result: invalid   
Time: 0:00:00.261237 spcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x31d40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88031d40
=>  Loading section .init, size 0x48 lma ffffffff88031dc0
=>  Loading section .fini, size 0x30 lma ffffffff88031e08
=>  Loading section .ctors, size 0x24 lma ffffffff88031e38
=>  Loading section .dtors, size 0x8 lma ffffffff88031e5c
=>  Loading section .rdata, size 0x542c lma ffffffff88031e70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880372a0
=>  Loading section .rel.dyn, size 0x20 lma ffffffff880372b8
=>  Loading section .data, size 0x6c0 lma ffffffff880372d8
=>  Loading section .sdata, size 0x4 lma ffffffff88037998
=>  Start address ffffffff88000004
=>  Transfer rate: 1821792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 431/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:423  W:0    | mipstx39/jmr3904: spedfsched01.exe
Result: invalid   
Time: 0:00:00.251557 spedfsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11690 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011690
=>  Loading section .init, size 0x48 lma ffffffff88011700
=>  Loading section .fini, size 0x30 lma ffffffff88011748
=>  Loading section .ctors, size 0x8 lma ffffffff88011778
=>  Loading section .dtors, size 0x8 lma ffffffff88011780
=>  Loading section .rdata, size 0x20a8 lma ffffffff88011790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013838
=>  Loading section .data, size 0x5c0 lma ffffffff88013850
=>  Start address ffffffff88000004
=>  Transfer rate: 651328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 432/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:427  W:0    | mipstx39/jmr3904: spedfsched02.exe
Result: invalid   
Time: 0:00:00.253589 spedfsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12980 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012980
=>  Loading section .init, size 0x48 lma ffffffff880129f0
=>  Loading section .fini, size 0x30 lma ffffffff88012a38
=>  Loading section .ctors, size 0x8 lma ffffffff88012a68
=>  Loading section .dtors, size 0x8 lma ffffffff88012a70
=>  Loading section .rdata, size 0x2190 lma ffffffff88012a80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c10
=>  Loading section .data, size 0x4a8 lma ffffffff88014c28
=>  Start address ffffffff88000004
=>  Transfer rate: 689728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 433/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:428  W:0    | mipstx39/jmr3904: spedfsched03.exe
Result: invalid   
Time: 0:00:00.251971 spedfsched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x123a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880123a0
=>  Loading section .init, size 0x48 lma ffffffff88012410
=>  Loading section .fini, size 0x30 lma ffffffff88012458
=>  Loading section .ctors, size 0x8 lma ffffffff88012488
=>  Loading section .dtors, size 0x8 lma ffffffff88012490
=>  Loading section .rdata, size 0x20bc lma ffffffff880124a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014560
=>  Loading section .data, size 0x4c0 lma ffffffff88014578
=>  Start address ffffffff88000004
=>  Transfer rate: 676192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 434/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:430  W:0    | mipstx39/jmr3904: spedfsched04.exe
Result: invalid   
Time: 0:00:00.253397 spedfsched04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11430 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011430
=>  Loading section .init, size 0x48 lma ffffffff880114a0
=>  Loading section .fini, size 0x30 lma ffffffff880114e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011518
=>  Loading section .dtors, size 0x8 lma ffffffff88011520
=>  Loading section .rdata, size 0x1f55 lma ffffffff88011530
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013488
=>  Loading section .data, size 0x448 lma ffffffff880134a0
=>  Start address ffffffff88000004
=>  Transfer rate: 640744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spedfsched04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 435/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:430  W:0    | mipstx39/jmr3904: sperror01.exe
Result: invalid   
Time: 0:00:00.279566 sperror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19400 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019400
=>  Loading section .init, size 0x48 lma ffffffff88019470
=>  Loading section .fini, size 0x30 lma ffffffff880194b8
=>  Loading section .ctors, size 0x8 lma ffffffff880194e8
=>  Loading section .dtors, size 0x8 lma ffffffff880194f0
=>  Loading section .rdata, size 0x2efc lma ffffffff88019500
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c400
=>  Loading section .data, size 0x59c lma ffffffff8801c418
=>  Start address ffffffff88000004
=>  Transfer rate: 937280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 436/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:430  W:0    | mipstx39/jmr3904: sperror02.exe
Result: invalid   
Time: 0:00:00.253171 sperror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19370 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88019370
=>  Loading section .init, size 0x48 lma ffffffff880193e0
=>  Loading section .fini, size 0x30 lma ffffffff88019428
=>  Loading section .ctors, size 0x8 lma ffffffff88019458
=>  Loading section .dtors, size 0x8 lma ffffffff88019460
=>  Loading section .rdata, size 0x2e7c lma ffffffff88019470
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c2f0
=>  Loading section .data, size 0x59c lma ffffffff8801c308
=>  Start address ffffffff88000004
=>  Transfer rate: 935104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 437/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:430  W:0    | mipstx39/jmr3904: sperror03.exe
Result: invalid   
Time: 0:00:00.261716 sperror03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fb80
=>  Loading section .init, size 0x48 lma ffffffff8800fbf0
=>  Loading section .fini, size 0x30 lma ffffffff8800fc38
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc68
=>  Loading section .dtors, size 0x8 lma ffffffff8800fc70
=>  Loading section .rdata, size 0x19b1 lma ffffffff8800fc80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011638
=>  Loading section .data, size 0x418 lma ffffffff88011650
=>  Start address ffffffff88000004
=>  Transfer rate: 578248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sperror03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 438/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:430  W:0    | mipstx39/jmr3904: spevent_err03.exe
Result: invalid   
Time: 0:00:00.255578 spevent_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17770 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017770
=>  Loading section .init, size 0x48 lma ffffffff880177e0
=>  Loading section .fini, size 0x30 lma ffffffff88017828
=>  Loading section .ctors, size 0x8 lma ffffffff88017858
=>  Loading section .dtors, size 0x8 lma ffffffff88017860
=>  Loading section .rdata, size 0x2928 lma ffffffff88017870
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a198
=>  Loading section .data, size 0x610 lma ffffffff8801a1b0
=>  Start address ffffffff88000004
=>  Transfer rate: 867776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spevent_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 439/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:430  W:0    | mipstx39/jmr3904: speventsystem01.exe
Result: invalid   
Time: 0:00:00.270339 speventsystem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103b0
=>  Loading section .init, size 0x48 lma ffffffff88010420
=>  Loading section .fini, size 0x30 lma ffffffff88010468
=>  Loading section .ctors, size 0x8 lma ffffffff88010498
=>  Loading section .dtors, size 0x8 lma ffffffff880104a0
=>  Loading section .rdata, size 0x1a59 lma ffffffff880104b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011f10
=>  Loading section .data, size 0x418 lma ffffffff88011f28
=>  Start address ffffffff88000004
=>  Transfer rate: 596360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventsystem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 440/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:438  W:0    | mipstx39/jmr3904: speventtransient01.exe
Result: invalid   
Time: 0:00:00.311494 speventtransient01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880102d0
=>  Loading section .init, size 0x48 lma ffffffff88010340
=>  Loading section .fini, size 0x30 lma ffffffff88010388
=>  Loading section .ctors, size 0x8 lma ffffffff880103b8
=>  Loading section .dtors, size 0x8 lma ffffffff880103c0
=>  Loading section .rdata, size 0x1a1d lma ffffffff880103d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011df0
=>  Loading section .data, size 0x418 lma ffffffff88011e08
=>  Start address ffffffff88000004
=>  Transfer rate: 594088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/speventtransient01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 441/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:438  W:0    | mipstx39/jmr3904: spextensions01.exe
Result: invalid   
Time: 0:00:00.258576 spextensions01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11bc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011bc0
=>  Loading section .init, size 0x48 lma ffffffff88011c30
=>  Loading section .fini, size 0x30 lma ffffffff88011c78
=>  Loading section .ctors, size 0x8 lma ffffffff88011ca8
=>  Loading section .dtors, size 0x8 lma ffffffff88011cb0
=>  Loading section .rdata, size 0x1db1 lma ffffffff88011cc0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a78
=>  Loading section .data, size 0x448 lma ffffffff88013a90
=>  Start address ffffffff88000004
=>  Transfer rate: 652872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spextensions01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 442/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:438  W:0    | mipstx39/jmr3904: spfatal01.exe
Result: invalid   
Time: 0:00:00.268482 spfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfce0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fce0
=>  Loading section .init, size 0x48 lma ffffffff8800fd50
=>  Loading section .fini, size 0x30 lma ffffffff8800fd98
=>  Loading section .ctors, size 0x8 lma ffffffff8800fdc8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fdd0
=>  Loading section .rdata, size 0x1dcc lma ffffffff8800fde0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011bb0
=>  Loading section .data, size 0x418 lma ffffffff88011bc8
=>  Start address ffffffff88000004
=>  Transfer rate: 589472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 443/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:438  W:0    | mipstx39/jmr3904: spfatal03.exe
Result: invalid   
Time: 0:00:00.259231 spfatal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c80
=>  Loading section .init, size 0x48 lma ffffffff88010cf0
=>  Loading section .fini, size 0x30 lma ffffffff88010d38
=>  Loading section .ctors, size 0x8 lma ffffffff88010d68
=>  Loading section .dtors, size 0x8 lma ffffffff88010d70
=>  Loading section .rdata, size 0x1f5d lma ffffffff88010d80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012ce0
=>  Loading section .data, size 0x448 lma ffffffff88012cf8
=>  Start address ffffffff88000004
=>  Transfer rate: 625064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 444/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:438  W:0    | mipstx39/jmr3904: spfatal04.exe
Result: invalid   
Time: 0:00:00.294027 spfatal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd80
=>  Loading section .init, size 0x48 lma ffffffff8800fdf0
=>  Loading section .fini, size 0x30 lma ffffffff8800fe38
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe68
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe70
=>  Loading section .rdata, size 0x1dc1 lma ffffffff8800fe80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c48
=>  Loading section .data, size 0x418 lma ffffffff88011c60
=>  Start address ffffffff88000004
=>  Transfer rate: 590664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 445/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:438  W:0    | mipstx39/jmr3904: spfatal05.exe
Result: invalid   
Time: 0:00:00.299273 spfatal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10060 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010060
=>  Loading section .init, size 0x48 lma ffffffff880100d0
=>  Loading section .fini, size 0x30 lma ffffffff88010118
=>  Loading section .ctors, size 0x8 lma ffffffff88010148
=>  Loading section .dtors, size 0x8 lma ffffffff88010150
=>  Loading section .rdata, size 0x1f01 lma ffffffff88010160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012068
=>  Loading section .data, size 0x418 lma ffffffff88012080
=>  Start address ffffffff88000004
=>  Transfer rate: 599112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 446/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:438  W:0    | mipstx39/jmr3904: spfatal09.exe
Result: invalid   
Time: 0:00:00.292600 spfatal09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe40
=>  Loading section .init, size 0x48 lma ffffffff8800feb0
=>  Loading section .fini, size 0x30 lma ffffffff8800fef8
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff28
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff30
=>  Loading section .rdata, size 0x1dd1 lma ffffffff8800ff40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d18
=>  Loading section .data, size 0x418 lma ffffffff88011d30
=>  Start address ffffffff88000004
=>  Transfer rate: 592328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 447/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:438  W:0    | mipstx39/jmr3904: spfatal10.exe
Result: invalid   
Time: 0:00:00.252428 spfatal10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd20
=>  Loading section .init, size 0x48 lma ffffffff8800fd90
=>  Loading section .fini, size 0x30 lma ffffffff8800fdd8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe08
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe10
=>  Loading section .rdata, size 0x1abd lma ffffffff8800fe20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118e0
=>  Loading section .data, size 0x418 lma ffffffff880118f8
=>  Start address ffffffff88000004
=>  Transfer rate: 583720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 448/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:446  W:0    | mipstx39/jmr3904: spfatal11.exe
Result: invalid   
Time: 0:00:00.254064 spfatal11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd10
=>  Loading section .init, size 0x48 lma ffffffff8800fd80
=>  Loading section .fini, size 0x30 lma ffffffff8800fdc8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fdf8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe00
=>  Loading section .rdata, size 0x1aad lma ffffffff8800fe10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880118c0
=>  Loading section .data, size 0x418 lma ffffffff880118d8
=>  Start address ffffffff88000004
=>  Transfer rate: 583464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 449/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:446  W:0    | mipstx39/jmr3904: spfatal12.exe
Result: invalid   
Time: 0:00:00.255403 spfatal12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe50
=>  Loading section .init, size 0x48 lma ffffffff8800fec0
=>  Loading section .fini, size 0x30 lma ffffffff8800ff08
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff38
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff40
=>  Loading section .rdata, size 0x1de9 lma ffffffff8800ff50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d40
=>  Loading section .data, size 0x418 lma ffffffff88011d58
=>  Start address ffffffff88000004
=>  Transfer rate: 592648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 450/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:446  W:0    | mipstx39/jmr3904: spfatal14.exe
Result: invalid   
Time: 0:00:00.255973 spfatal14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfdf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fdf0
=>  Loading section .init, size 0x48 lma ffffffff8800fe60
=>  Loading section .fini, size 0x30 lma ffffffff8800fea8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fed8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fee0
=>  Loading section .rdata, size 0x1dc9 lma ffffffff8800fef0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cc0
=>  Loading section .data, size 0x418 lma ffffffff88011cd8
=>  Start address ffffffff88000004
=>  Transfer rate: 591624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 451/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:446  W:0    | mipstx39/jmr3904: spfatal15.exe
Result: invalid   
Time: 0:00:00.257003 spfatal15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfdf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fdf0
=>  Loading section .init, size 0x48 lma ffffffff8800fe60
=>  Loading section .fini, size 0x30 lma ffffffff8800fea8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fed8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fee0
=>  Loading section .rdata, size 0x1dc9 lma ffffffff8800fef0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cc0
=>  Loading section .data, size 0x418 lma ffffffff88011cd8
=>  Start address ffffffff88000004
=>  Transfer rate: 591624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 452/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:446  W:0    | mipstx39/jmr3904: spfatal28.exe
Result: invalid   
Time: 0:00:00.255955 spfatal28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfdc0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fdc0
=>  Loading section .init, size 0x48 lma ffffffff8800fe30
=>  Loading section .fini, size 0x30 lma ffffffff8800fe78
=>  Loading section .ctors, size 0x8 lma ffffffff8800fea8
=>  Loading section .dtors, size 0x8 lma ffffffff8800feb0
=>  Loading section .rdata, size 0x1dc1 lma ffffffff8800fec0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c88
=>  Loading section .data, size 0x418 lma ffffffff88011ca0
=>  Start address ffffffff88000004
=>  Transfer rate: 591176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal28.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 453/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:446  W:0    | mipstx39/jmr3904: spfatal29.exe
Result: invalid   
Time: 0:00:00.254579 spfatal29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010270
=>  Loading section .init, size 0x48 lma ffffffff880102e0
=>  Loading section .fini, size 0x30 lma ffffffff88010328
=>  Loading section .ctors, size 0x8 lma ffffffff88010358
=>  Loading section .dtors, size 0x8 lma ffffffff88010360
=>  Loading section .rdata, size 0x1e09 lma ffffffff88010370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012180
=>  Loading section .data, size 0x448 lma ffffffff88012198
=>  Start address ffffffff88000004
=>  Transfer rate: 601736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal29.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 454/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:446  W:0    | mipstx39/jmr3904: spfatal30.exe
Result: invalid   
Time: 0:00:00.251780 spfatal30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe030 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800e030
=>  Loading section .init, size 0x48 lma ffffffff8800e090
=>  Loading section .fini, size 0x30 lma ffffffff8800e0d8
=>  Loading section .ctors, size 0x8 lma ffffffff8800e108
=>  Loading section .dtors, size 0x8 lma ffffffff8800e110
=>  Loading section .rdata, size 0x1881 lma ffffffff8800e120
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800f9a8
=>  Loading section .data, size 0x3cc lma ffffffff8800f9c0
=>  Start address ffffffff88000004
=>  Transfer rate: 519144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal30.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 455/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:446  W:0    | mipstx39/jmr3904: spfatal31.exe
Result: invalid   
Time: 0:00:00.269225 spfatal31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf210 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f210
=>  Loading section .init, size 0x48 lma ffffffff8800f280
=>  Loading section .fini, size 0x30 lma ffffffff8800f2c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f2f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f300
=>  Loading section .rdata, size 0x18e9 lma ffffffff8800f310
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010c00
=>  Loading section .data, size 0x414 lma ffffffff88010c18
=>  Start address ffffffff88000004
=>  Transfer rate: 557288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal31.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 456/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:451  W:0    | mipstx39/jmr3904: spfatal32.exe
Result: invalid   
Time: 0:00:00.253540 spfatal32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe20
=>  Loading section .init, size 0x48 lma ffffffff8800fe90
=>  Loading section .fini, size 0x30 lma ffffffff8800fed8
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff08
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff10
=>  Loading section .rdata, size 0x1dd1 lma ffffffff8800ff20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011cf8
=>  Loading section .data, size 0x418 lma ffffffff88011d10
=>  Start address ffffffff88000004
=>  Transfer rate: 592072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal32.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 457/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:451  W:0    | mipstx39/jmr3904: spfatal33.exe
Result: invalid   
Time: 0:00:00.268786 spfatal33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe80
=>  Loading section .init, size 0x48 lma ffffffff8800fef0
=>  Loading section .fini, size 0x30 lma ffffffff8800ff38
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff68
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff70
=>  Loading section .rdata, size 0x1df1 lma ffffffff8800ff80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011d78
=>  Loading section .data, size 0x418 lma ffffffff88011d90
=>  Start address ffffffff88000004
=>  Transfer rate: 593096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal33.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 458/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:451  W:0    | mipstx39/jmr3904: spfatal34.exe
Result: invalid   
Time: 0:00:00.266711 spfatal34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fc00
=>  Loading section .init, size 0x48 lma ffffffff8800fc70
=>  Loading section .fini, size 0x30 lma ffffffff8800fcb8
=>  Loading section .ctors, size 0x8 lma ffffffff8800fce8
=>  Loading section .dtors, size 0x8 lma ffffffff8800fcf0
=>  Loading section .rdata, size 0x1db4 lma ffffffff8800fd00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ab8
=>  Loading section .data, size 0x418 lma ffffffff88011ad0
=>  Start address ffffffff88000004
=>  Transfer rate: 587488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfatal34.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 459/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:454  W:0    | mipstx39/jmr3904: spfifo01.exe
Result: invalid   
Time: 0:00:00.255676 spfifo01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf110 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f110
=>  Loading section .init, size 0x48 lma ffffffff8800f180
=>  Loading section .fini, size 0x30 lma ffffffff8800f1c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f1f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f200
=>  Loading section .rdata, size 0x1a5d lma ffffffff8800f210
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010c70
=>  Loading section .data, size 0x408 lma ffffffff88010c88
=>  Start address ffffffff88000004
=>  Transfer rate: 558120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 460/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:454  W:0    | mipstx39/jmr3904: spfifo02.exe
Result: invalid   
Time: 0:00:00.254149 spfifo02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12350 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012350
=>  Loading section .init, size 0x48 lma ffffffff880123c0
=>  Loading section .fini, size 0x30 lma ffffffff88012408
=>  Loading section .ctors, size 0x8 lma ffffffff88012438
=>  Loading section .dtors, size 0x8 lma ffffffff88012440
=>  Loading section .rdata, size 0x2668 lma ffffffff88012450
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014ab8
=>  Loading section .data, size 0x440 lma ffffffff88014ad0
=>  Start address ffffffff88000004
=>  Transfer rate: 686144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 461/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:455  W:0    | mipstx39/jmr3904: spfifo03.exe
Result: invalid   
Time: 0:00:00.319052 spfifo03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13840 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013840
=>  Loading section .init, size 0x48 lma ffffffff880138c0
=>  Loading section .fini, size 0x30 lma ffffffff88013908
=>  Loading section .ctors, size 0x8 lma ffffffff88013938
=>  Loading section .dtors, size 0x8 lma ffffffff88013940
=>  Loading section .rdata, size 0x27c4 lma ffffffff88013950
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016118
=>  Loading section .data, size 0x47c lma ffffffff88016130
=>  Start address ffffffff88000004
=>  Transfer rate: 732416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 462/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:457  W:0    | mipstx39/jmr3904: spfifo04.exe
Result: invalid   
Time: 0:00:00.258839 spfifo04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12220 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012220
=>  Loading section .init, size 0x48 lma ffffffff88012290
=>  Loading section .fini, size 0x30 lma ffffffff880122d8
=>  Loading section .ctors, size 0x8 lma ffffffff88012308
=>  Loading section .dtors, size 0x8 lma ffffffff88012310
=>  Loading section .rdata, size 0x1db9 lma ffffffff88012320
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880140e0
=>  Loading section .data, size 0x438 lma ffffffff880140f8
=>  Start address ffffffff88000004
=>  Transfer rate: 665864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 463/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:457  W:0    | mipstx39/jmr3904: spfifo05.exe
Result: invalid   
Time: 0:00:00.251690 spfifo05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x126f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880126f0
=>  Loading section .init, size 0x48 lma ffffffff88012760
=>  Loading section .fini, size 0x30 lma ffffffff880127a8
=>  Loading section .ctors, size 0x8 lma ffffffff880127d8
=>  Loading section .dtors, size 0x8 lma ffffffff880127e0
=>  Loading section .rdata, size 0x28e8 lma ffffffff880127f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880150d8
=>  Loading section .data, size 0x460 lma ffffffff880150f0
=>  Start address ffffffff88000004
=>  Transfer rate: 698944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfifo05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 464/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:457  W:0    | mipstx39/jmr3904: spfreechain01.exe
Result: invalid   
Time: 0:00:00.260473 spfreechain01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf300 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f300
=>  Loading section .init, size 0x48 lma ffffffff8800f370
=>  Loading section .fini, size 0x30 lma ffffffff8800f3b8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f3e8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f3f0
=>  Loading section .rdata, size 0x1b69 lma ffffffff8800f400
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010f70
=>  Loading section .data, size 0x408 lma ffffffff88010f88
=>  Start address ffffffff88000004
=>  Transfer rate: 564232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spfreechain01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 465/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:457  W:0    | mipstx39/jmr3904: spglobalcon01.exe
Result: invalid   
Time: 0:00:00.254601 spglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe6a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800e6a0
=>  Loading section .init, size 0x48 lma ffffffff8800e700
=>  Loading section .fini, size 0x30 lma ffffffff8800e748
=>  Loading section .ctors, size 0xc lma ffffffff8800e778
=>  Loading section .dtors, size 0x8 lma ffffffff8800e784
=>  Loading section .rdata, size 0x1980 lma ffffffff8800e790
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010110
=>  Loading section .data, size 0x390 lma ffffffff88010128
=>  Start address ffffffff88000004
=>  Transfer rate: 533920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 466/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:457  W:0    | mipstx39/jmr3904: spglobalcon02.exe
Result: invalid   
Time: 0:00:00.281108 spglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100a0
=>  Loading section .init, size 0x48 lma ffffffff88010110
=>  Loading section .fini, size 0x30 lma ffffffff88010158
=>  Loading section .ctors, size 0x18 lma ffffffff88010188
=>  Loading section .dtors, size 0x18 lma ffffffff880101a0
=>  Loading section .rdata, size 0x1a2d lma ffffffff880101c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011bf0
=>  Loading section .data, size 0x418 lma ffffffff88011c08
=>  Start address ffffffff88000004
=>  Transfer rate: 589992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 467/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:465  W:0    | mipstx39/jmr3904: spheapprot.exe
Result: invalid   
Time: 0:00:00.285800 spheapprot.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf180 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f180
=>  Loading section .init, size 0x48 lma ffffffff8800f1f0
=>  Loading section .fini, size 0x30 lma ffffffff8800f238
=>  Loading section .ctors, size 0x8 lma ffffffff8800f268
=>  Loading section .dtors, size 0x8 lma ffffffff8800f270
=>  Loading section .rdata, size 0x1971 lma ffffffff8800f280
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010bf8
=>  Loading section .data, size 0x408 lma ffffffff88010c10
=>  Start address ffffffff88000004
=>  Transfer rate: 557128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spheapprot.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 468/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:464  W:0    | mipstx39/jmr3904: spinternalerror01.exe
Result: invalid   
Time: 0:00:00.253406 spinternalerror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x3ed0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x50 lma ffffffff88003ed0
=>  Loading section .init, size 0x48 lma ffffffff88003f20
=>  Loading section .fini, size 0x30 lma ffffffff88003f68
=>  Loading section .ctors, size 0x8 lma ffffffff88003f98
=>  Loading section .dtors, size 0x8 lma ffffffff88003fa0
=>  Loading section .rdata, size 0x143c lma ffffffff88003fb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880053f0
=>  Loading section .data, size 0x7c lma ffffffff88005408
=>  Start address ffffffff88000004
=>  Transfer rate: 172992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 469/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:465  W:0    | mipstx39/jmr3904: spinternalerror02.exe
Result: invalid   
Time: 0:00:00.258737 spinternalerror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf140 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f140
=>  Loading section .init, size 0x48 lma ffffffff8800f1b0
=>  Loading section .fini, size 0x30 lma ffffffff8800f1f8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f228
=>  Loading section .dtors, size 0x8 lma ffffffff8800f230
=>  Loading section .rdata, size 0x1d55 lma ffffffff8800f240
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010f98
=>  Loading section .data, size 0x408 lma ffffffff88010fb0
=>  Start address ffffffff88000004
=>  Transfer rate: 564584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spinternalerror02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 470/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:465  W:0    | mipstx39/jmr3904: spintr_err01.exe
Result: invalid   
Time: 0:00:00.271061 spintr_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfbb0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fbb0
=>  Loading section .init, size 0x48 lma ffffffff8800fc20
=>  Loading section .fini, size 0x30 lma ffffffff8800fc68
=>  Loading section .ctors, size 0x8 lma ffffffff8800fc98
=>  Loading section .dtors, size 0x8 lma ffffffff8800fca0
=>  Loading section .rdata, size 0x1a01 lma ffffffff8800fcb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880116b8
=>  Loading section .data, size 0x418 lma ffffffff880116d0
=>  Start address ffffffff88000004
=>  Transfer rate: 579272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spintr_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 471/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:465  W:0    | mipstx39/jmr3904: splinkersets01.exe
Result: invalid   
Time: 0:00:00.516660 splinkersets01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf840 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xa0 lma ffffffff8800f840
=>  Loading section .init, size 0x48 lma ffffffff8800f8e0
=>  Loading section .fini, size 0x30 lma ffffffff8800f928
=>  Loading section .ctors, size 0x8 lma ffffffff8800f958
=>  Loading section .dtors, size 0x8 lma ffffffff8800f960
=>  Loading section .rdata, size 0x2209 lma ffffffff8800f970
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b80
=>  Loading section .data, size 0x408 lma ffffffff88011b98
=>  Loading section .rtemsrwset, size 0x34 lma ffffffff88011fa0
=>  Start address ffffffff88000004
=>  Transfer rate: 589352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/splinkersets01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 472/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:465  W:0    | mipstx39/jmr3904: spmisc01.exe
Result: invalid   
Time: 0:00:00.257133 spmisc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf1a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f1a0
=>  Loading section .init, size 0x48 lma ffffffff8800f210
=>  Loading section .fini, size 0x30 lma ffffffff8800f258
=>  Loading section .ctors, size 0x8 lma ffffffff8800f288
=>  Loading section .dtors, size 0x8 lma ffffffff8800f290
=>  Loading section .rdata, size 0x1ad1 lma ffffffff8800f2a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010d78
=>  Loading section .data, size 0x408 lma ffffffff88010d90
=>  Start address ffffffff88000004
=>  Transfer rate: 560200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmisc01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 473/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:465  W:0    | mipstx39/jmr3904: spmkdir.exe
Result: invalid   
Time: 0:00:00.265656 spmkdir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf8e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f8e0
=>  Loading section .init, size 0x48 lma ffffffff8800f950
=>  Loading section .fini, size 0x30 lma ffffffff8800f998
=>  Loading section .ctors, size 0x8 lma ffffffff8800f9c8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f9d0
=>  Loading section .rdata, size 0x1c19 lma ffffffff8800f9e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011600
=>  Loading section .data, size 0x408 lma ffffffff88011618
=>  Start address ffffffff88000004
=>  Transfer rate: 577672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmkdir.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 474/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:465  W:0    | mipstx39/jmr3904: spmountmgr01.exe
Result: invalid   
Time: 0:00:00.251175 spmountmgr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fd60
=>  Loading section .init, size 0x48 lma ffffffff8800fdd0
=>  Loading section .fini, size 0x30 lma ffffffff8800fe18
=>  Loading section .ctors, size 0x8 lma ffffffff8800fe48
=>  Loading section .dtors, size 0x8 lma ffffffff8800fe50
=>  Loading section .rdata, size 0x1cc1 lma ffffffff8800fe60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b28
=>  Loading section .data, size 0x408 lma ffffffff88011b40
=>  Start address ffffffff88000004
=>  Transfer rate: 588232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmountmgr01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 475/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:471  W:0    | mipstx39/jmr3904: spmrsp01.exe
Result: invalid   
Time: 0:00:00.280799 spmrsp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12750 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012750
=>  Loading section .init, size 0x48 lma ffffffff880127c0
=>  Loading section .fini, size 0x30 lma ffffffff88012808
=>  Loading section .ctors, size 0x8 lma ffffffff88012838
=>  Loading section .dtors, size 0x8 lma ffffffff88012840
=>  Loading section .rdata, size 0x1c51 lma ffffffff88012850
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880144a8
=>  Loading section .data, size 0x478 lma ffffffff880144c0
=>  Start address ffffffff88000004
=>  Transfer rate: 674120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmrsp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 476/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:472  W:0    | mipstx39/jmr3904: spmsgq_err01.exe
Result: invalid   
Time: 0:00:00.529056 spmsgq_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12460 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012460
=>  Loading section .init, size 0x48 lma ffffffff880124d0
=>  Loading section .fini, size 0x30 lma ffffffff88012518
=>  Loading section .ctors, size 0x8 lma ffffffff88012548
=>  Loading section .dtors, size 0x8 lma ffffffff88012550
=>  Loading section .rdata, size 0x2a99 lma ffffffff88012560
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015000
=>  Loading section .data, size 0x448 lma ffffffff88015018
=>  Start address ffffffff88000004
=>  Transfer rate: 696968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 477/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:472  W:0    | mipstx39/jmr3904: spmsgq_err02.exe
Result: invalid   
Time: 0:00:00.510128 spmsgq_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880119b0
=>  Loading section .init, size 0x48 lma ffffffff88011a20
=>  Loading section .fini, size 0x30 lma ffffffff88011a68
=>  Loading section .ctors, size 0x8 lma ffffffff88011a98
=>  Loading section .dtors, size 0x8 lma ffffffff88011aa0
=>  Loading section .rdata, size 0x22ad lma ffffffff88011ab0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013d60
=>  Loading section .data, size 0x448 lma ffffffff88013d78
=>  Start address ffffffff88000004
=>  Transfer rate: 658856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmsgq_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 478/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:473  W:0    | mipstx39/jmr3904: spmutex01.exe
Result: invalid   
Time: 0:00:00.251620 spmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14170 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88014170
=>  Loading section .init, size 0x48 lma ffffffff880141e0
=>  Loading section .fini, size 0x30 lma ffffffff88014228
=>  Loading section .ctors, size 0x8 lma ffffffff88014258
=>  Loading section .dtors, size 0x8 lma ffffffff88014260
=>  Loading section .rdata, size 0x1bf1 lma ffffffff88014270
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015e68
=>  Loading section .data, size 0x478 lma ffffffff88015e80
=>  Start address ffffffff88000004
=>  Transfer rate: 726856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 479/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:472  W:0    | mipstx39/jmr3904: spnsext01.exe
Result: invalid   
Time: 0:00:00.508231 spnsext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10020 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010020
=>  Loading section .init, size 0x48 lma ffffffff88010090
=>  Loading section .fini, size 0x30 lma ffffffff880100d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010108
=>  Loading section .dtors, size 0x8 lma ffffffff88010110
=>  Loading section .rdata, size 0x19fd lma ffffffff88010120
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011b20
=>  Loading section .data, size 0x418 lma ffffffff88011b38
=>  Start address ffffffff88000004
=>  Transfer rate: 588328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spnsext01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 480/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:473  W:0    | mipstx39/jmr3904: spntp01.exe
Result: invalid   
Time: 0:00:00.252069 spntp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14fe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014fe0
=>  Loading section .init, size 0x48 lma ffffffff88015060
=>  Loading section .fini, size 0x30 lma ffffffff880150a8
=>  Loading section .ctors, size 0x8 lma ffffffff880150d8
=>  Loading section .dtors, size 0x8 lma ffffffff880150e0
=>  Loading section .rdata, size 0x2438 lma ffffffff880150f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017528
=>  Loading section .data, size 0x460 lma ffffffff88017540
=>  Start address ffffffff88000004
=>  Transfer rate: 773312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spntp01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 481/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:473  W:0    | mipstx39/jmr3904: spobjgetnext.exe
Result: invalid   
Time: 0:00:00.329067 spobjgetnext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ff70
=>  Loading section .init, size 0x48 lma ffffffff8800ffe0
=>  Loading section .fini, size 0x30 lma ffffffff88010028
=>  Loading section .ctors, size 0x8 lma ffffffff88010058
=>  Loading section .dtors, size 0x8 lma ffffffff88010060
=>  Loading section .rdata, size 0x1a7d lma ffffffff88010070
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011af0
=>  Loading section .data, size 0x418 lma ffffffff88011b08
=>  Start address ffffffff88000004
=>  Transfer rate: 587944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spobjgetnext.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 482/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:473  W:0    | mipstx39/jmr3904: sppagesize.exe
Result: invalid   
Time: 0:00:00.254695 sppagesize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf010 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f010
=>  Loading section .init, size 0x48 lma ffffffff8800f080
=>  Loading section .fini, size 0x30 lma ffffffff8800f0c8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f0f8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f100
=>  Loading section .rdata, size 0x19c9 lma ffffffff8800f110
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ae0
=>  Loading section .data, size 0x408 lma ffffffff88010af8
=>  Start address ffffffff88000004
=>  Transfer rate: 554888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppagesize.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 483/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:477  W:0    | mipstx39/jmr3904: sppartition_err01.exe
Result: invalid   
Time: 0:00:00.270748 sppartition_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ed0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010ed0
=>  Loading section .init, size 0x48 lma ffffffff88010f40
=>  Loading section .fini, size 0x30 lma ffffffff88010f88
=>  Loading section .ctors, size 0x8 lma ffffffff88010fb8
=>  Loading section .dtors, size 0x8 lma ffffffff88010fc0
=>  Loading section .rdata, size 0x2591 lma ffffffff88010fd0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013568
=>  Loading section .data, size 0x448 lma ffffffff88013580
=>  Start address ffffffff88000004
=>  Transfer rate: 642504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppartition_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 484/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:477  W:0    | mipstx39/jmr3904: sppercpudata01.exe
Result: invalid   
Time: 0:00:00.261150 sppercpudata01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf870 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f870
=>  Loading section .init, size 0x48 lma ffffffff8800f8e0
=>  Loading section .fini, size 0x30 lma ffffffff8800f928
=>  Loading section .ctors, size 0x8 lma ffffffff8800f958
=>  Loading section .dtors, size 0x8 lma ffffffff8800f960
=>  Loading section .rdata, size 0x1b39 lma ffffffff8800f970
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880114b0
=>  Loading section .data, size 0x408 lma ffffffff880114c8
=>  Loading section .rtemsrwset, size 0x4c lma ffffffff880118d0
=>  Start address ffffffff88000004
=>  Transfer rate: 575592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppercpudata01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 485/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:476  W:0    | mipstx39/jmr3904: spport_err01.exe
Result: invalid   
Time: 0:00:00.261888 spport_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106e0
=>  Loading section .init, size 0x48 lma ffffffff88010750
=>  Loading section .fini, size 0x30 lma ffffffff88010798
=>  Loading section .ctors, size 0x8 lma ffffffff880107c8
=>  Loading section .dtors, size 0x8 lma ffffffff880107d0
=>  Loading section .rdata, size 0x207d lma ffffffff880107e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012860
=>  Loading section .data, size 0x448 lma ffffffff88012878
=>  Start address ffffffff88000004
=>  Transfer rate: 615848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spport_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 486/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:481  W:0    | mipstx39/jmr3904: sppps01.exe
Result: invalid   
Time: 0:00:00.255915 sppps01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15360 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88015360
=>  Loading section .init, size 0x48 lma ffffffff880153e0
=>  Loading section .fini, size 0x30 lma ffffffff88015428
=>  Loading section .ctors, size 0x8 lma ffffffff88015458
=>  Loading section .dtors, size 0x8 lma ffffffff88015460
=>  Loading section .rdata, size 0x2398 lma ffffffff88015470
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017808
=>  Loading section .data, size 0x478 lma ffffffff88017820
=>  Start address ffffffff88000004
=>  Transfer rate: 779392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sppps01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 487/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:481  W:0    | mipstx39/jmr3904: spprintk.exe
Result: invalid   
Time: 0:00:00.262476 spprintk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff8800f070
=>  Loading section .init, size 0x48 lma ffffffff8800f0d0
=>  Loading section .fini, size 0x30 lma ffffffff8800f118
=>  Loading section .ctors, size 0x8 lma ffffffff8800f148
=>  Loading section .dtors, size 0x8 lma ffffffff8800f150
=>  Loading section .rdata, size 0x23e1 lma ffffffff8800f160
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011548
=>  Loading section .data, size 0x3c8 lma ffffffff88011560
=>  Start address ffffffff88000004
=>  Transfer rate: 575688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprintk.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 488/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:483  W:0    | mipstx39/jmr3904: spprivenv01.exe
Result: invalid   
Time: 0:00:00.269310 spprivenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011150
=>  Loading section .init, size 0x48 lma ffffffff880111c0
=>  Loading section .fini, size 0x30 lma ffffffff88011208
=>  Loading section .ctors, size 0x8 lma ffffffff88011238
=>  Loading section .dtors, size 0x8 lma ffffffff88011240
=>  Loading section .rdata, size 0x20f4 lma ffffffff88011250
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013348
=>  Loading section .data, size 0x45c lma ffffffff88013360
=>  Start address ffffffff88000004
=>  Transfer rate: 638336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprivenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 489/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:483  W:0    | mipstx39/jmr3904: spprofiling01.exe
Result: invalid   
Time: 0:00:00.262737 spprofiling01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ff60
=>  Loading section .init, size 0x48 lma ffffffff8800ffd0
=>  Loading section .fini, size 0x30 lma ffffffff88010018
=>  Loading section .ctors, size 0x8 lma ffffffff88010048
=>  Loading section .dtors, size 0x8 lma ffffffff88010050
=>  Loading section .rdata, size 0x1a75 lma ffffffff88010060
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011ad8
=>  Loading section .data, size 0x418 lma ffffffff88011af0
=>  Start address ffffffff88000004
=>  Transfer rate: 587752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spprofiling01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 490/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:484  W:0    | mipstx39/jmr3904: spqreslib.exe
Result: invalid   
Time: 0:00:00.262647 spqreslib.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x130b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880130b0
=>  Loading section .init, size 0x48 lma ffffffff88013120
=>  Loading section .fini, size 0x30 lma ffffffff88013168
=>  Loading section .ctors, size 0x8 lma ffffffff88013198
=>  Loading section .dtors, size 0x8 lma ffffffff880131a0
=>  Loading section .rdata, size 0x2669 lma ffffffff880131b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015820
=>  Loading section .data, size 0x458 lma ffffffff88015838
=>  Start address ffffffff88000004
=>  Transfer rate: 713736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spqreslib.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 491/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:484  W:0    | mipstx39/jmr3904: spratemon_err01.exe
Result: invalid   
Time: 0:00:00.298763 spratemon_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c40
=>  Loading section .init, size 0x48 lma ffffffff88011cb0
=>  Loading section .fini, size 0x30 lma ffffffff88011cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88011d28
=>  Loading section .dtors, size 0x8 lma ffffffff88011d30
=>  Loading section .rdata, size 0x2741 lma ffffffff88011d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014488
=>  Loading section .data, size 0x448 lma ffffffff880144a0
=>  Start address ffffffff88000004
=>  Transfer rate: 673480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spratemon_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 492/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:484  W:0    | mipstx39/jmr3904: sprbtree01.exe
Result: invalid   
Time: 0:00:00.273612 sprbtree01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110f0
=>  Loading section .init, size 0x48 lma ffffffff88011160
=>  Loading section .fini, size 0x30 lma ffffffff880111a8
=>  Loading section .ctors, size 0x8 lma ffffffff880111d8
=>  Loading section .dtors, size 0x8 lma ffffffff880111e0
=>  Loading section .rdata, size 0x6f65 lma ffffffff880111f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018158
=>  Loading section .data, size 0x498 lma ffffffff88018170
=>  Start address ffffffff88000004
=>  Transfer rate: 798696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprbtree01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 493/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:484  W:0    | mipstx39/jmr3904: spregion_err01.exe
Result: invalid   
Time: 0:00:00.257346 spregion_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ab0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012ab0
=>  Loading section .init, size 0x48 lma ffffffff88012b20
=>  Loading section .fini, size 0x30 lma ffffffff88012b68
=>  Loading section .ctors, size 0x8 lma ffffffff88012b98
=>  Loading section .dtors, size 0x8 lma ffffffff88012ba0
=>  Loading section .rdata, size 0x2959 lma ffffffff88012bb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015510
=>  Loading section .data, size 0x448 lma ffffffff88015528
=>  Start address ffffffff88000004
=>  Transfer rate: 707336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spregion_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 494/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:490  W:0    | mipstx39/jmr3904: sprmsched01.exe
Result: invalid   
Time: 0:00:00.257299 sprmsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011410
=>  Loading section .init, size 0x48 lma ffffffff88011480
=>  Loading section .fini, size 0x30 lma ffffffff880114c8
=>  Loading section .ctors, size 0x8 lma ffffffff880114f8
=>  Loading section .dtors, size 0x8 lma ffffffff88011500
=>  Loading section .rdata, size 0x1f45 lma ffffffff88011510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013458
=>  Loading section .data, size 0x448 lma ffffffff88013470
=>  Start address ffffffff88000004
=>  Transfer rate: 640360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 495/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:492  W:0    | mipstx39/jmr3904: sprmsched02.exe
Result: invalid   
Time: 0:00:00.270039 sprmsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010c10
=>  Loading section .init, size 0x48 lma ffffffff88010c80
=>  Loading section .fini, size 0x30 lma ffffffff88010cc8
=>  Loading section .ctors, size 0x8 lma ffffffff88010cf8
=>  Loading section .dtors, size 0x8 lma ffffffff88010d00
=>  Loading section .rdata, size 0x1f0d lma ffffffff88010d10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c20
=>  Loading section .data, size 0x448 lma ffffffff88012c38
=>  Start address ffffffff88000004
=>  Transfer rate: 623528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sprmsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 496/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:492  W:0    | mipstx39/jmr3904: spscheduler01.exe
Result: invalid   
Time: 0:00:00.284818 spscheduler01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15050 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88015050
=>  Loading section .init, size 0x48 lma ffffffff880150c0
=>  Loading section .fini, size 0x30 lma ffffffff88015108
=>  Loading section .ctors, size 0x8 lma ffffffff88015138
=>  Loading section .dtors, size 0x8 lma ffffffff88015140
=>  Loading section .rdata, size 0x1e4d lma ffffffff88015150
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88016fa0
=>  Loading section .data, size 0x478 lma ffffffff88016fb8
=>  Start address ffffffff88000004
=>  Transfer rate: 762152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spscheduler01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 497/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:492  W:0    | mipstx39/jmr3904: spsem01.exe
Result: invalid   
Time: 0:00:00.252216 spsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011c40
=>  Loading section .init, size 0x48 lma ffffffff88011cb0
=>  Loading section .fini, size 0x30 lma ffffffff88011cf8
=>  Loading section .ctors, size 0x8 lma ffffffff88011d28
=>  Loading section .dtors, size 0x8 lma ffffffff88011d30
=>  Loading section .rdata, size 0x2079 lma ffffffff88011d40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013dc0
=>  Loading section .data, size 0x448 lma ffffffff88013dd8
=>  Start address ffffffff88000004
=>  Transfer rate: 659592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 498/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:492  W:0    | mipstx39/jmr3904: spsem02.exe
Result: invalid   
Time: 0:00:00.593833 spsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011f40
=>  Loading section .init, size 0x48 lma ffffffff88011fb0
=>  Loading section .fini, size 0x30 lma ffffffff88011ff8
=>  Loading section .ctors, size 0x8 lma ffffffff88012028
=>  Loading section .dtors, size 0x8 lma ffffffff88012030
=>  Loading section .rdata, size 0x2139 lma ffffffff88012040
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014180
=>  Loading section .data, size 0x448 lma ffffffff88014198
=>  Start address ffffffff88000004
=>  Transfer rate: 667272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 499/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:492  W:0    | mipstx39/jmr3904: spsem03.exe
Result: invalid   
Time: 0:00:00.263296 spsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010e80
=>  Loading section .init, size 0x48 lma ffffffff88010ef0
=>  Loading section .fini, size 0x30 lma ffffffff88010f38
=>  Loading section .ctors, size 0x8 lma ffffffff88010f68
=>  Loading section .dtors, size 0x8 lma ffffffff88010f70
=>  Loading section .rdata, size 0x1a0d lma ffffffff88010f80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012990
=>  Loading section .data, size 0x448 lma ffffffff880129a8
=>  Start address ffffffff88000004
=>  Transfer rate: 618280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 500/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:492  W:0    | mipstx39/jmr3904: spsem_err01.exe
Result: invalid   
Time: 0:00:00.270631 spsem_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11930 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011930
=>  Loading section .init, size 0x48 lma ffffffff880119a0
=>  Loading section .fini, size 0x30 lma ffffffff880119e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011a18
=>  Loading section .dtors, size 0x8 lma ffffffff88011a20
=>  Loading section .rdata, size 0x249d lma ffffffff88011a30
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013ed0
=>  Loading section .data, size 0x448 lma ffffffff88013ee8
=>  Start address ffffffff88000004
=>  Transfer rate: 661800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 501/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:492  W:0    | mipstx39/jmr3904: spsem_err02.exe
Result: invalid   
Time: 0:00:00.257756 spsem_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011b20
=>  Loading section .init, size 0x48 lma ffffffff88011b90
=>  Loading section .fini, size 0x30 lma ffffffff88011bd8
=>  Loading section .ctors, size 0x8 lma ffffffff88011c08
=>  Loading section .dtors, size 0x8 lma ffffffff88011c10
=>  Loading section .rdata, size 0x2335 lma ffffffff88011c20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f58
=>  Loading section .data, size 0x448 lma ffffffff88013f70
=>  Start address ffffffff88000004
=>  Transfer rate: 662888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsem_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 502/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:499  W:0    | mipstx39/jmr3904: spsignal_err01.exe
Result: invalid   
Time: 0:00:00.268069 spsignal_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10230 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010230
=>  Loading section .init, size 0x48 lma ffffffff880102a0
=>  Loading section .fini, size 0x30 lma ffffffff880102e8
=>  Loading section .ctors, size 0x8 lma ffffffff88010318
=>  Loading section .dtors, size 0x8 lma ffffffff88010320
=>  Loading section .rdata, size 0x1e69 lma ffffffff88010330
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121a0
=>  Loading section .data, size 0x418 lma ffffffff880121b8
=>  Start address ffffffff88000004
=>  Transfer rate: 601608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsignal_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 503/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:499  W:0    | mipstx39/jmr3904: spsimplesched01.exe
Result: invalid   
Time: 0:00:00.282366 spsimplesched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11730 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011730
=>  Loading section .init, size 0x48 lma ffffffff880117a0
=>  Loading section .fini, size 0x30 lma ffffffff880117e8
=>  Loading section .ctors, size 0x8 lma ffffffff88011818
=>  Loading section .dtors, size 0x8 lma ffffffff88011820
=>  Loading section .rdata, size 0x2024 lma ffffffff88011830
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013858
=>  Loading section .data, size 0x5c0 lma ffffffff88013870
=>  Start address ffffffff88000004
=>  Transfer rate: 651552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 504/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:499  W:0    | mipstx39/jmr3904: spsimplesched02.exe
Result: invalid   
Time: 0:00:00.254548 spsimplesched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880114b0
=>  Loading section .init, size 0x48 lma ffffffff88011520
=>  Loading section .fini, size 0x30 lma ffffffff88011568
=>  Loading section .ctors, size 0x8 lma ffffffff88011598
=>  Loading section .dtors, size 0x8 lma ffffffff880115a0
=>  Loading section .rdata, size 0x1f89 lma ffffffff880115b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013540
=>  Loading section .data, size 0x448 lma ffffffff88013558
=>  Start address ffffffff88000004
=>  Transfer rate: 642184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 505/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:499  W:0    | mipstx39/jmr3904: spsimplesched03.exe
Result: invalid   
Time: 0:00:00.258648 spsimplesched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ffe0
=>  Loading section .init, size 0x48 lma ffffffff88010050
=>  Loading section .fini, size 0x30 lma ffffffff88010098
=>  Loading section .ctors, size 0x8 lma ffffffff880100c8
=>  Loading section .dtors, size 0x8 lma ffffffff880100d0
=>  Loading section .rdata, size 0x1dcd lma ffffffff880100e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011eb0
=>  Loading section .data, size 0x448 lma ffffffff88011ec8
=>  Start address ffffffff88000004
=>  Transfer rate: 596008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsimplesched03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 506/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:499  W:0    | mipstx39/jmr3904: spsize.exe
Result: invalid   
Time: 0:00:00.274477 spsize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012270
=>  Loading section .init, size 0x48 lma ffffffff880122e0
=>  Loading section .fini, size 0x30 lma ffffffff88012328
=>  Loading section .ctors, size 0x8 lma ffffffff88012358
=>  Loading section .dtors, size 0x8 lma ffffffff88012360
=>  Loading section .rdata, size 0x2500 lma ffffffff88012370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014870
=>  Loading section .data, size 0x420 lma ffffffff88014888
=>  Start address ffffffff88000004
=>  Transfer rate: 681216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsize.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 507/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:499  W:0    | mipstx39/jmr3904: spstdc17.exe
Result: invalid   
Time: 0:00:00.261281 spstdc17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdc17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdc17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800ef50
=>  Loading section .init, size 0x48 lma ffffffff8800efc0
=>  Loading section .fini, size 0x30 lma ffffffff8800f008
=>  Loading section .ctors, size 0x8 lma ffffffff8800f038
=>  Loading section .dtors, size 0x8 lma ffffffff8800f040
=>  Loading section .rdata, size 0x1971 lma ffffffff8800f050
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880109c8
=>  Loading section .data, size 0x408 lma ffffffff880109e0
=>  Start address ffffffff88000004
=>  Transfer rate: 552648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstdc17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 508/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:499  W:0    | mipstx39/jmr3904: spstdthreads01.exe
Result: invalid   
Time: 0:00:00.269434 spstdthreads01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13fd0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013fd0
=>  Loading section .init, size 0x48 lma ffffffff88014050
=>  Loading section .fini, size 0x30 lma ffffffff88014098
=>  Loading section .ctors, size 0x8 lma ffffffff880140c8
=>  Loading section .dtors, size 0x8 lma ffffffff880140d0
=>  Loading section .rdata, size 0x1c39 lma ffffffff880140e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015d20
=>  Loading section .data, size 0x530 lma ffffffff88015d38
=>  Start address ffffffff88000004
=>  Transfer rate: 725704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstdthreads01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 509/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:505  W:0    | mipstx39/jmr3904: spstkalloc.exe
Result: invalid   
Time: 0:00:00.261291 spstkalloc.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf650 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f650
=>  Loading section .init, size 0x48 lma ffffffff8800f6c0
=>  Loading section .fini, size 0x30 lma ffffffff8800f708
=>  Loading section .ctors, size 0x8 lma ffffffff8800f738
=>  Loading section .dtors, size 0x8 lma ffffffff8800f740
=>  Loading section .rdata, size 0x1e78 lma ffffffff8800f750
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880115c8
=>  Loading section .data, size 0x408 lma ffffffff880115e0
=>  Start address ffffffff88000004
=>  Transfer rate: 577280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 510/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:507  W:0    | mipstx39/jmr3904: spstkalloc02.exe
Result: invalid   
Time: 0:00:00.505998 spstkalloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9280 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88009280
=>  Loading section .init, size 0x48 lma ffffffff880092e0
=>  Loading section .fini, size 0x30 lma ffffffff88009328
=>  Loading section .ctors, size 0x8 lma ffffffff88009358
=>  Loading section .dtors, size 0x8 lma ffffffff88009360
=>  Loading section .rdata, size 0x1960 lma ffffffff88009370
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800acd0
=>  Loading section .data, size 0x1cc lma ffffffff8800ace8
=>  Start address ffffffff88000004
=>  Transfer rate: 357728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 511/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:507  W:0    | mipstx39/jmr3904: spstkalloc03.exe
Result: invalid   
Time: 0:00:00.260472 spstkalloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x176e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880176e0
=>  Loading section .init, size 0x48 lma ffffffff88017750
=>  Loading section .fini, size 0x30 lma ffffffff88017798
=>  Loading section .ctors, size 0x8 lma ffffffff880177c8
=>  Loading section .dtors, size 0x8 lma ffffffff880177d0
=>  Loading section .rdata, size 0x2090 lma ffffffff880177e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88019870
=>  Loading section .data, size 0x5a8 lma ffffffff88019888
=>  Start address ffffffff88000004
=>  Transfer rate: 848192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 512/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:507  W:0    | mipstx39/jmr3904: spstkalloc04.exe
Result: invalid   
Time: 0:00:00.262056 spstkalloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17680 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88017680
=>  Loading section .init, size 0x48 lma ffffffff880176f0
=>  Loading section .fini, size 0x30 lma ffffffff88017738
=>  Loading section .ctors, size 0x8 lma ffffffff88017768
=>  Loading section .dtors, size 0x8 lma ffffffff88017770
=>  Loading section .rdata, size 0x2058 lma ffffffff88017780
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880197d8
=>  Loading section .data, size 0x5a8 lma ffffffff880197f0
=>  Start address ffffffff88000004
=>  Transfer rate: 846976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spstkalloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 513/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:507  W:0    | mipstx39/jmr3904: spsysinit01.exe
Result: invalid   
Time: 0:00:00.302493 spsysinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x310 lma ffffffff88018a70
=>  Loading section .init, size 0x48 lma ffffffff88018d80
=>  Loading section .fini, size 0x30 lma ffffffff88018dc8
=>  Loading section .ctors, size 0x8 lma ffffffff88018df8
=>  Loading section .dtors, size 0x8 lma ffffffff88018e00
=>  Loading section .rdata, size 0x3a2d lma ffffffff88018e10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801c840
=>  Loading section .data, size 0x7c0 lma ffffffff8801c858
=>  Start address ffffffff88000004
=>  Transfer rate: 950376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsysinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 514/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:507  W:0    | mipstx39/jmr3904: spsyslock01.exe
Result: invalid   
Time: 0:00:00.288402 spsyslock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88013620
=>  Loading section .init, size 0x48 lma ffffffff88013690
=>  Loading section .fini, size 0x30 lma ffffffff880136d8
=>  Loading section .ctors, size 0x8 lma ffffffff88013708
=>  Loading section .dtors, size 0x8 lma ffffffff88013710
=>  Loading section .rdata, size 0x1e69 lma ffffffff88013720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015590
=>  Loading section .data, size 0x418 lma ffffffff880155a8
=>  Start address ffffffff88000004
=>  Transfer rate: 707976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spsyslock01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 515/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:507  W:0    | mipstx39/jmr3904: sptask_err01.exe
Result: invalid   
Time: 0:00:00.308980 sptask_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1f19 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012430
=>  Loading section .data, size 0x418 lma ffffffff88012448
=>  Start address ffffffff88000004
=>  Transfer rate: 606856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 516/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:507  W:0    | mipstx39/jmr3904: sptask_err02.exe
Result: invalid   
Time: 0:00:00.296837 sptask_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11390 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011390
=>  Loading section .init, size 0x48 lma ffffffff88011400
=>  Loading section .fini, size 0x30 lma ffffffff88011448
=>  Loading section .ctors, size 0x8 lma ffffffff88011478
=>  Loading section .dtors, size 0x8 lma ffffffff88011480
=>  Loading section .rdata, size 0x2139 lma ffffffff88011490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880135d0
=>  Loading section .data, size 0x440 lma ffffffff880135e8
=>  Start address ffffffff88000004
=>  Transfer rate: 643272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 517/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:509  W:0    | mipstx39/jmr3904: sptask_err03.exe
Result: invalid   
Time: 0:00:00.258049 sptask_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10870 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010870
=>  Loading section .init, size 0x48 lma ffffffff880108e0
=>  Loading section .fini, size 0x30 lma ffffffff88010928
=>  Loading section .ctors, size 0x8 lma ffffffff88010958
=>  Loading section .dtors, size 0x8 lma ffffffff88010960
=>  Loading section .rdata, size 0x22fd lma ffffffff88010970
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012c70
=>  Loading section .data, size 0x418 lma ffffffff88012c88
=>  Start address ffffffff88000004
=>  Transfer rate: 623784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 518/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:514  W:0    | mipstx39/jmr3904: sptask_err04.exe
Result: invalid   
Time: 0:00:00.503760 sptask_err04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x118e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880118e0
=>  Loading section .init, size 0x48 lma ffffffff88011950
=>  Loading section .fini, size 0x30 lma ffffffff88011998
=>  Loading section .ctors, size 0x8 lma ffffffff880119c8
=>  Loading section .dtors, size 0x8 lma ffffffff880119d0
=>  Loading section .rdata, size 0x2481 lma ffffffff880119e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013e68
=>  Loading section .data, size 0x418 lma ffffffff88013e80
=>  Start address ffffffff88000004
=>  Transfer rate: 660552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptask_err04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 519/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:516  W:0    | mipstx39/jmr3904: sptasknopreempt01.exe
Result: invalid   
Time: 0:00:00.279859 sptasknopreempt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10740 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010740
=>  Loading section .init, size 0x48 lma ffffffff880107b0
=>  Loading section .fini, size 0x30 lma ffffffff880107f8
=>  Loading section .ctors, size 0x8 lma ffffffff88010828
=>  Loading section .dtors, size 0x8 lma ffffffff88010830
=>  Loading section .rdata, size 0x19e5 lma ffffffff88010840
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012228
=>  Loading section .data, size 0x448 lma ffffffff88012240
=>  Start address ffffffff88000004
=>  Transfer rate: 603112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptasknopreempt01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 520/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:516  W:0    | mipstx39/jmr3904: spthread01.exe
Result: invalid   
Time: 0:00:00.280737 spthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011620
=>  Loading section .init, size 0x48 lma ffffffff88011690
=>  Loading section .fini, size 0x30 lma ffffffff880116d8
=>  Loading section .ctors, size 0x8 lma ffffffff88011708
=>  Loading section .dtors, size 0x8 lma ffffffff88011710
=>  Loading section .rdata, size 0x1a41 lma ffffffff88011720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013168
=>  Loading section .data, size 0x418 lma ffffffff88013180
=>  Start address ffffffff88000004
=>  Transfer rate: 633928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 521/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:516  W:0    | mipstx39/jmr3904: spthreadlife01.exe
Result: invalid   
Time: 0:00:00.526570 spthreadlife01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012e20
=>  Loading section .init, size 0x48 lma ffffffff88012e90
=>  Loading section .fini, size 0x30 lma ffffffff88012ed8
=>  Loading section .ctors, size 0x8 lma ffffffff88012f08
=>  Loading section .dtors, size 0x8 lma ffffffff88012f10
=>  Loading section .rdata, size 0x1d0d lma ffffffff88012f20
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014c30
=>  Loading section .data, size 0x478 lma ffffffff88014c48
=>  Start address ffffffff88000004
=>  Transfer rate: 689576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadlife01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 522/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:516  W:0    | mipstx39/jmr3904: spthreadq01.exe
Result: invalid   
Time: 0:00:00.278273 spthreadq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12270 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012270
=>  Loading section .init, size 0x48 lma ffffffff880122f0
=>  Loading section .fini, size 0x30 lma ffffffff88012338
=>  Loading section .ctors, size 0x8 lma ffffffff88012368
=>  Loading section .dtors, size 0x8 lma ffffffff88012370
=>  Loading section .rdata, size 0x1b91 lma ffffffff88012380
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013f18
=>  Loading section .data, size 0x4c8 lma ffffffff88013f30
=>  Start address ffffffff88000004
=>  Transfer rate: 663368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spthreadq01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 523/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:516  W:0    | mipstx39/jmr3904: sptimecounter01.exe
Result: invalid   
Time: 0:00:00.305972 sptimecounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x65a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x50 lma ffffffff880065a0
=>  Loading section .init, size 0x48 lma ffffffff880065f0
=>  Loading section .fini, size 0x30 lma ffffffff88006638
=>  Loading section .ctors, size 0x8 lma ffffffff88006668
=>  Loading section .dtors, size 0x8 lma ffffffff88006670
=>  Loading section .rdata, size 0x175c lma ffffffff88006680
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88007de0
=>  Loading section .data, size 0x240 lma ffffffff88007df8
=>  Start address ffffffff88000004
=>  Transfer rate: 262496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 524/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:516  W:0    | mipstx39/jmr3904: sptimecounter02.exe
Result: invalid   
Time: 0:00:00.269447 sptimecounter02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12070 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012070
=>  Loading section .init, size 0x48 lma ffffffff880120f0
=>  Loading section .fini, size 0x30 lma ffffffff88012138
=>  Loading section .ctors, size 0x8 lma ffffffff88012168
=>  Loading section .dtors, size 0x8 lma ffffffff88012170
=>  Loading section .rdata, size 0x1b45 lma ffffffff88012180
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013cc8
=>  Loading section .data, size 0x448 lma ffffffff88013ce0
=>  Start address ffffffff88000004
=>  Transfer rate: 657640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 525/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:516  W:0    | mipstx39/jmr3904: sptimecounter03.exe
Result: invalid   
Time: 0:00:00.263340 sptimecounter03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d90
=>  Loading section .init, size 0x48 lma ffffffff88010e00
=>  Loading section .fini, size 0x30 lma ffffffff88010e48
=>  Loading section .ctors, size 0x8 lma ffffffff88010e78
=>  Loading section .dtors, size 0x8 lma ffffffff88010e80
=>  Loading section .rdata, size 0x1a1d lma ffffffff88010e90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128b0
=>  Loading section .data, size 0x448 lma ffffffff880128c8
=>  Start address ffffffff88000004
=>  Transfer rate: 616488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 526/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:520  W:0    | mipstx39/jmr3904: sptimecounter04.exe
Result: invalid   
Time: 0:00:00.256669 sptimecounter04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10260 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010260
=>  Loading section .init, size 0x48 lma ffffffff880102d0
=>  Loading section .fini, size 0x30 lma ffffffff88010318
=>  Loading section .ctors, size 0x8 lma ffffffff88010348
=>  Loading section .dtors, size 0x8 lma ffffffff88010350
=>  Loading section .rdata, size 0x1a99 lma ffffffff88010360
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e00
=>  Loading section .data, size 0x418 lma ffffffff88011e18
=>  Start address ffffffff88000004
=>  Transfer rate: 594184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimecounter04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 527/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:520  W:0    | mipstx39/jmr3904: sptimer_err01.exe
Result: invalid   
Time: 0:00:00.251979 sptimer_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12110 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012110
=>  Loading section .init, size 0x48 lma ffffffff88012180
=>  Loading section .fini, size 0x30 lma ffffffff880121c8
=>  Loading section .ctors, size 0x8 lma ffffffff880121f8
=>  Loading section .dtors, size 0x8 lma ffffffff88012200
=>  Loading section .rdata, size 0x2571 lma ffffffff88012210
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014788
=>  Loading section .data, size 0x470 lma ffffffff880147a0
=>  Start address ffffffff88000004
=>  Transfer rate: 679944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 528/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:521  W:0    | mipstx39/jmr3904: sptimer_err02.exe
Result: invalid   
Time: 0:00:00.275713 sptimer_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x120d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880120d0
=>  Loading section .init, size 0x48 lma ffffffff88012140
=>  Loading section .fini, size 0x30 lma ffffffff88012188
=>  Loading section .ctors, size 0x8 lma ffffffff880121b8
=>  Loading section .dtors, size 0x8 lma ffffffff880121c0
=>  Loading section .rdata, size 0x2381 lma ffffffff880121d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014558
=>  Loading section .data, size 0x470 lma ffffffff88014570
=>  Start address ffffffff88000004
=>  Transfer rate: 675464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimer_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 529/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:521  W:0    | mipstx39/jmr3904: sptimerserver01.exe
Result: invalid   
Time: 0:00:00.253306 sptimerserver01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880115a0
=>  Loading section .init, size 0x48 lma ffffffff88011610
=>  Loading section .fini, size 0x30 lma ffffffff88011658
=>  Loading section .ctors, size 0x8 lma ffffffff88011688
=>  Loading section .dtors, size 0x8 lma ffffffff88011690
=>  Loading section .rdata, size 0x1aa9 lma ffffffff880116a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013150
=>  Loading section .data, size 0x470 lma ffffffff88013168
=>  Start address ffffffff88000004
=>  Transfer rate: 634440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimerserver01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 530/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:527  W:0    | mipstx39/jmr3904: sptimespec01.exe
Result: invalid   
Time: 0:00:00.280585 sptimespec01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109c0
=>  Loading section .init, size 0x48 lma ffffffff88010a30
=>  Loading section .fini, size 0x30 lma ffffffff88010a78
=>  Loading section .ctors, size 0x8 lma ffffffff88010aa8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ab0
=>  Loading section .rdata, size 0x1d79 lma ffffffff88010ac0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012840
=>  Loading section .data, size 0x428 lma ffffffff88012858
=>  Start address ffffffff88000004
=>  Transfer rate: 615304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptimespec01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 531/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:527  W:0    | mipstx39/jmr3904: sptls01.exe
Result: invalid   
Time: 0:00:00.277166 sptls01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107d0
=>  Loading section .init, size 0x48 lma ffffffff88010840
=>  Loading section .fini, size 0x30 lma ffffffff88010888
=>  Loading section .ctors, size 0x8 lma ffffffff880108b8
=>  Loading section .dtors, size 0x8 lma ffffffff880108c0
=>  Loading section .rdata, size 0x1a39 lma ffffffff880108d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012310
=>  Loading section .tdata, size 0x1 lma ffffffff88012328
=>  Loading section .data, size 0x420 lma ffffffff88012330
=>  Start address ffffffff88000004
=>  Transfer rate: 604624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 532/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:527  W:0    | mipstx39/jmr3904: sptls02.exe
Result: invalid   
Time: 0:00:00.279690 sptls02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2de6c lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x74 lma ffffffff8802de6c
=>  Loading section .init, size 0x48 lma ffffffff8802dee0
=>  Loading section .fini, size 0x30 lma ffffffff8802df28
=>  Loading section .ctors, size 0x18 lma ffffffff8802df58
=>  Loading section .dtors, size 0x8 lma ffffffff8802df70
=>  Loading section .rdata, size 0x422c lma ffffffff8802df80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880321b0
=>  Loading section .rel.dyn, size 0x10 lma ffffffff880321c8
=>  Loading section .tdata, size 0x114 lma ffffffff88032200
=>  Loading section .data, size 0x640 lma ffffffff88032400
=>  Loading section .sdata, size 0x4 lma ffffffff88032a40
=>  Start address ffffffff88000004
=>  Transfer rate: 1657120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 533/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:527  W:0    | mipstx39/jmr3904: sptls03.exe
Result: invalid   
Time: 0:00:00.276969 sptls03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x8f50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88008f50
=>  Loading section .init, size 0x48 lma ffffffff88008fb0
=>  Loading section .fini, size 0x30 lma ffffffff88008ff8
=>  Loading section .ctors, size 0x8 lma ffffffff88009028
=>  Loading section .dtors, size 0x8 lma ffffffff88009030
=>  Loading section .rdata, size 0x1530 lma ffffffff88009040
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800a570
=>  Loading section .data, size 0x1d4 lma ffffffff8800a588
=>  Start address ffffffff88000004
=>  Transfer rate: 342688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 534/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:528  W:0    | mipstx39/jmr3904: sptls04.exe
Result: invalid   
Time: 0:00:00.269929 sptls04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf050 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f050
=>  Loading section .init, size 0x48 lma ffffffff8800f0c0
=>  Loading section .fini, size 0x30 lma ffffffff8800f108
=>  Loading section .ctors, size 0xc lma ffffffff8800f138
=>  Loading section .dtors, size 0x8 lma ffffffff8800f144
=>  Loading section .rdata, size 0x1991 lma ffffffff8800f150
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010ae8
=>  Loading section .tdata, size 0x4 lma ffffffff88010b00
=>  Loading section .data, size 0x408 lma ffffffff88010b08
=>  Start address ffffffff88000004
=>  Transfer rate: 555016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/sptls04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 535/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:528  W:0    | mipstx39/jmr3904: spunlimited01.exe
Result: invalid   
Time: 0:00:00.252370 spunlimited01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spunlimited01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spunlimited01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15660 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88015660
=>  Loading section .init, size 0x48 lma ffffffff880156e0
=>  Loading section .fini, size 0x30 lma ffffffff88015728
=>  Loading section .ctors, size 0x8 lma ffffffff88015758
=>  Loading section .dtors, size 0x8 lma ffffffff88015760
=>  Loading section .rdata, size 0x2304 lma ffffffff88015770
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88017a78
=>  Loading section .data, size 0x478 lma ffffffff88017a90
=>  Start address ffffffff88000004
=>  Transfer rate: 784352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spunlimited01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 536/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:528  W:0    | mipstx39/jmr3904: spversion01.exe
Result: invalid   
Time: 0:00:00.252801 spversion01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf0c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f0c0
=>  Loading section .init, size 0x48 lma ffffffff8800f130
=>  Loading section .fini, size 0x30 lma ffffffff8800f178
=>  Loading section .ctors, size 0x8 lma ffffffff8800f1a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f1b0
=>  Loading section .rdata, size 0x1a1d lma ffffffff8800f1c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010be0
=>  Loading section .data, size 0x408 lma ffffffff88010bf8
=>  Start address ffffffff88000004
=>  Transfer rate: 556968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spversion01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 537/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:528  W:0    | mipstx39/jmr3904: spwatchdog.exe
Result: invalid   
Time: 0:00:00.253452 spwatchdog.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12af0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012af0
=>  Loading section .init, size 0x48 lma ffffffff88012b60
=>  Loading section .fini, size 0x30 lma ffffffff88012ba8
=>  Loading section .ctors, size 0x8 lma ffffffff88012bd8
=>  Loading section .dtors, size 0x8 lma ffffffff88012be0
=>  Loading section .rdata, size 0x255c lma ffffffff88012bf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88015150
=>  Loading section .data, size 0x490 lma ffffffff88015168
=>  Start address ffffffff88000004
=>  Transfer rate: 700256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwatchdog.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 538/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:536  W:0    | mipstx39/jmr3904: spwkspace.exe
Result: invalid   
Time: 0:00:00.262769 spwkspace.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf700 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f700
=>  Loading section .init, size 0x48 lma ffffffff8800f770
=>  Loading section .fini, size 0x30 lma ffffffff8800f7b8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f7e8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f7f0
=>  Loading section .rdata, size 0x1c15 lma ffffffff8800f800
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011418
=>  Loading section .data, size 0x408 lma ffffffff88011430
=>  Start address ffffffff88000004
=>  Transfer rate: 573800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/sptests/spwkspace.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 539/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:536  W:0    | mipstx39/jmr3904: tm01.exe
Result: invalid   
Time: 0:00:00.256171 tm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880109e0
=>  Loading section .init, size 0x48 lma ffffffff88010a50
=>  Loading section .fini, size 0x30 lma ffffffff88010a98
=>  Loading section .ctors, size 0x8 lma ffffffff88010ac8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ad0
=>  Loading section .rdata, size 0x1e85 lma ffffffff88010ae0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012968
=>  Loading section .data, size 0x438 lma ffffffff88012980
=>  Start address ffffffff88000004
=>  Transfer rate: 617832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 540/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:536  W:0    | mipstx39/jmr3904: tm02.exe
Result: invalid   
Time: 0:00:00.255324 tm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1ea5 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123b8
=>  Loading section .data, size 0x438 lma ffffffff880123d0
=>  Start address ffffffff88000004
=>  Transfer rate: 606184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm02.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 541/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:536  W:0    | mipstx39/jmr3904: tm03.exe
Result: invalid   
Time: 0:00:00.255019 tm03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010950
=>  Loading section .init, size 0x48 lma ffffffff880109c0
=>  Loading section .fini, size 0x30 lma ffffffff88010a08
=>  Loading section .ctors, size 0x8 lma ffffffff88010a38
=>  Loading section .dtors, size 0x8 lma ffffffff88010a40
=>  Loading section .rdata, size 0x1e6d lma ffffffff88010a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128c0
=>  Loading section .data, size 0x438 lma ffffffff880128d8
=>  Start address ffffffff88000004
=>  Transfer rate: 616488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm03.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 542/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:536  W:0    | mipstx39/jmr3904: tm04.exe
Result: invalid   
Time: 0:00:00.272145 tm04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12050 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88012050
=>  Loading section .init, size 0x48 lma ffffffff880120c0
=>  Loading section .fini, size 0x30 lma ffffffff88012108
=>  Loading section .ctors, size 0x8 lma ffffffff88012138
=>  Loading section .dtors, size 0x8 lma ffffffff88012140
=>  Loading section .rdata, size 0x20e5 lma ffffffff88012150
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014238
=>  Loading section .data, size 0x438 lma ffffffff88014250
=>  Start address ffffffff88000004
=>  Transfer rate: 668648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm04.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 543/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:538  W:0    | mipstx39/jmr3904: tm05.exe
Result: invalid   
Time: 0:00:00.254808 tm05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf5b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f5b0
=>  Loading section .init, size 0x48 lma ffffffff8800f620
=>  Loading section .fini, size 0x30 lma ffffffff8800f668
=>  Loading section .ctors, size 0x8 lma ffffffff8800f698
=>  Loading section .dtors, size 0x8 lma ffffffff8800f6a0
=>  Loading section .rdata, size 0x1de1 lma ffffffff8800f6b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011498
=>  Loading section .data, size 0x408 lma ffffffff880114b0
=>  Start address ffffffff88000004
=>  Transfer rate: 574792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm05.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 544/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:538  W:0    | mipstx39/jmr3904: tm06.exe
Result: invalid   
Time: 0:00:00.252564 tm06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe60
=>  Loading section .init, size 0x48 lma ffffffff8800fed0
=>  Loading section .fini, size 0x30 lma ffffffff8800ff18
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff48
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff50
=>  Loading section .rdata, size 0x1e59 lma ffffffff8800ff60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011dc0
=>  Loading section .data, size 0x408 lma ffffffff88011dd8
=>  Start address ffffffff88000004
=>  Transfer rate: 593544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm06.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 545/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:538  W:0    | mipstx39/jmr3904: tm07.exe
Result: invalid   
Time: 0:00:00.255378 tm07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf8f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f8f0
=>  Loading section .init, size 0x48 lma ffffffff8800f960
=>  Loading section .fini, size 0x30 lma ffffffff8800f9a8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f9d8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f9e0
=>  Loading section .rdata, size 0x1db9 lma ffffffff8800f9f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880117b0
=>  Loading section .data, size 0x408 lma ffffffff880117c8
=>  Start address ffffffff88000004
=>  Transfer rate: 581128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm07.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 546/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:544  W:0    | mipstx39/jmr3904: tm08.exe
Result: invalid   
Time: 0:00:00.259881 tm08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d80 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d80
=>  Loading section .init, size 0x48 lma ffffffff88010df0
=>  Loading section .fini, size 0x30 lma ffffffff88010e38
=>  Loading section .ctors, size 0x8 lma ffffffff88010e68
=>  Loading section .dtors, size 0x8 lma ffffffff88010e70
=>  Loading section .rdata, size 0x1fa9 lma ffffffff88010e80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012e30
=>  Loading section .data, size 0x440 lma ffffffff88012e48
=>  Start address ffffffff88000004
=>  Transfer rate: 627656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm08.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 547/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:544  W:0    | mipstx39/jmr3904: tm09.exe
Result: invalid   
Time: 0:00:00.258735 tm09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x108b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880108b0
=>  Loading section .init, size 0x48 lma ffffffff88010920
=>  Loading section .fini, size 0x30 lma ffffffff88010968
=>  Loading section .ctors, size 0x8 lma ffffffff88010998
=>  Loading section .dtors, size 0x8 lma ffffffff880109a0
=>  Loading section .rdata, size 0x1efd lma ffffffff880109b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128b0
=>  Loading section .data, size 0x438 lma ffffffff880128c8
=>  Start address ffffffff88000004
=>  Transfer rate: 616360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm09.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 548/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:544  W:0    | mipstx39/jmr3904: tm10.exe
Result: invalid   
Time: 0:00:00.262318 tm10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10250 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010250
=>  Loading section .init, size 0x48 lma ffffffff880102c0
=>  Loading section .fini, size 0x30 lma ffffffff88010308
=>  Loading section .ctors, size 0x8 lma ffffffff88010338
=>  Loading section .dtors, size 0x8 lma ffffffff88010340
=>  Loading section .rdata, size 0x1e4d lma ffffffff88010350
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880121a0
=>  Loading section .data, size 0x438 lma ffffffff880121b8
=>  Start address ffffffff88000004
=>  Transfer rate: 601896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm10.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 549/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:544  W:0    | mipstx39/jmr3904: tm11.exe
Result: invalid   
Time: 0:00:00.257728 tm11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105d0
=>  Loading section .init, size 0x48 lma ffffffff88010640
=>  Loading section .fini, size 0x30 lma ffffffff88010688
=>  Loading section .ctors, size 0x8 lma ffffffff880106b8
=>  Loading section .dtors, size 0x8 lma ffffffff880106c0
=>  Loading section .rdata, size 0x1e3d lma ffffffff880106d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012510
=>  Loading section .data, size 0x438 lma ffffffff88012528
=>  Start address ffffffff88000004
=>  Transfer rate: 608936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm11.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 550/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:544  W:0    | mipstx39/jmr3904: tm12.exe
Result: invalid   
Time: 0:00:00.254503 tm12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10620 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010620
=>  Loading section .init, size 0x48 lma ffffffff88010690
=>  Loading section .fini, size 0x30 lma ffffffff880106d8
=>  Loading section .ctors, size 0x8 lma ffffffff88010708
=>  Loading section .dtors, size 0x8 lma ffffffff88010710
=>  Loading section .rdata, size 0x1e3d lma ffffffff88010720
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012560
=>  Loading section .data, size 0x438 lma ffffffff88012578
=>  Start address ffffffff88000004
=>  Transfer rate: 609576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm12.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 551/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:544  W:0    | mipstx39/jmr3904: tm13.exe
Result: invalid   
Time: 0:00:00.252071 tm13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880105d0
=>  Loading section .init, size 0x48 lma ffffffff88010640
=>  Loading section .fini, size 0x30 lma ffffffff88010688
=>  Loading section .ctors, size 0x8 lma ffffffff880106b8
=>  Loading section .dtors, size 0x8 lma ffffffff880106c0
=>  Loading section .rdata, size 0x1e3d lma ffffffff880106d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012510
=>  Loading section .data, size 0x438 lma ffffffff88012528
=>  Start address ffffffff88000004
=>  Transfer rate: 608936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm13.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 552/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:544  W:0    | mipstx39/jmr3904: tm14.exe
Result: invalid   
Time: 0:00:00.252156 tm14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10610 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010610
=>  Loading section .init, size 0x48 lma ffffffff88010680
=>  Loading section .fini, size 0x30 lma ffffffff880106c8
=>  Loading section .ctors, size 0x8 lma ffffffff880106f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010700
=>  Loading section .rdata, size 0x1e3d lma ffffffff88010710
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012550
=>  Loading section .data, size 0x438 lma ffffffff88012568
=>  Start address ffffffff88000004
=>  Transfer rate: 609448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm14.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 553/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:544  W:0    | mipstx39/jmr3904: tm15.exe
Result: invalid   
Time: 0:00:00.252278 tm15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fa90
=>  Loading section .init, size 0x48 lma ffffffff8800fb00
=>  Loading section .fini, size 0x30 lma ffffffff8800fb48
=>  Loading section .ctors, size 0x8 lma ffffffff8800fb78
=>  Loading section .dtors, size 0x8 lma ffffffff8800fb80
=>  Loading section .rdata, size 0x1ec9 lma ffffffff8800fb90
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011a60
=>  Loading section .data, size 0x408 lma ffffffff88011a78
=>  Start address ffffffff88000004
=>  Transfer rate: 586632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm15.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 554/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:552  W:0    | mipstx39/jmr3904: tm16.exe
Result: invalid   
Time: 0:00:00.255652 tm16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf960 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f960
=>  Loading section .init, size 0x48 lma ffffffff8800f9d0
=>  Loading section .fini, size 0x30 lma ffffffff8800fa18
=>  Loading section .ctors, size 0x8 lma ffffffff8800fa48
=>  Loading section .dtors, size 0x8 lma ffffffff8800fa50
=>  Loading section .rdata, size 0x1e01 lma ffffffff8800fa60
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011868
=>  Loading section .data, size 0x408 lma ffffffff88011880
=>  Start address ffffffff88000004
=>  Transfer rate: 582600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm16.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 555/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:552  W:0    | mipstx39/jmr3904: tm17.exe
Result: invalid   
Time: 0:00:00.254667 tm17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf6f0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f6f0
=>  Loading section .init, size 0x48 lma ffffffff8800f760
=>  Loading section .fini, size 0x30 lma ffffffff8800f7a8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f7d8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f7e0
=>  Loading section .rdata, size 0x1dc1 lma ffffffff8800f7f0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880115b8
=>  Loading section .data, size 0x408 lma ffffffff880115d0
=>  Start address ffffffff88000004
=>  Transfer rate: 577096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm17.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 556/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:552  W:0    | mipstx39/jmr3904: tm18.exe
Result: invalid   
Time: 0:00:00.272361 tm18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf350 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f350
=>  Loading section .init, size 0x48 lma ffffffff8800f3c0
=>  Loading section .fini, size 0x30 lma ffffffff8800f408
=>  Loading section .ctors, size 0x8 lma ffffffff8800f438
=>  Loading section .dtors, size 0x8 lma ffffffff8800f440
=>  Loading section .rdata, size 0x1db1 lma ffffffff8800f450
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011208
=>  Loading section .data, size 0x408 lma ffffffff88011220
=>  Start address ffffffff88000004
=>  Transfer rate: 569544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm18.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 557/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:552  W:0    | mipstx39/jmr3904: tm19.exe
Result: invalid   
Time: 0:00:00.257008 tm19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800fe40
=>  Loading section .init, size 0x48 lma ffffffff8800feb0
=>  Loading section .fini, size 0x30 lma ffffffff8800fef8
=>  Loading section .ctors, size 0x8 lma ffffffff8800ff28
=>  Loading section .dtors, size 0x8 lma ffffffff8800ff30
=>  Loading section .rdata, size 0x1f11 lma ffffffff8800ff40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011e58
=>  Loading section .data, size 0x408 lma ffffffff88011e70
=>  Start address ffffffff88000004
=>  Transfer rate: 594760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm19.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 558/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:552  W:0    | mipstx39/jmr3904: tm20.exe
Result: invalid   
Time: 0:00:00.258696 tm20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x117a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880117a0
=>  Loading section .init, size 0x48 lma ffffffff88011820
=>  Loading section .fini, size 0x30 lma ffffffff88011868
=>  Loading section .ctors, size 0x8 lma ffffffff88011898
=>  Loading section .dtors, size 0x8 lma ffffffff880118a0
=>  Loading section .rdata, size 0x21bd lma ffffffff880118b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013a70
=>  Loading section .data, size 0x480 lma ffffffff88013a88
=>  Start address ffffffff88000004
=>  Transfer rate: 653288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm20.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 559/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:552  W:0    | mipstx39/jmr3904: tm21.exe
Result: invalid   
Time: 0:00:00.277988 tm21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11150 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff88011150
=>  Loading section .init, size 0x48 lma ffffffff880111e0
=>  Loading section .fini, size 0x30 lma ffffffff88011228
=>  Loading section .ctors, size 0x8 lma ffffffff88011258
=>  Loading section .dtors, size 0x8 lma ffffffff88011260
=>  Loading section .rdata, size 0x1f8d lma ffffffff88011270
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013200
=>  Loading section .data, size 0x558 lma ffffffff88013218
=>  Start address ffffffff88000004
=>  Transfer rate: 637736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm21.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 560/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:552  W:0    | mipstx39/jmr3904: tm22.exe
Result: invalid   
Time: 0:00:00.252776 tm22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880107d0
=>  Loading section .init, size 0x48 lma ffffffff88010840
=>  Loading section .fini, size 0x30 lma ffffffff88010888
=>  Loading section .ctors, size 0x8 lma ffffffff880108b8
=>  Loading section .dtors, size 0x8 lma ffffffff880108c0
=>  Loading section .rdata, size 0x1f0d lma ffffffff880108d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880127e0
=>  Loading section .data, size 0x438 lma ffffffff880127f8
=>  Start address ffffffff88000004
=>  Transfer rate: 614696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm22.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 561/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:552  W:0    | mipstx39/jmr3904: tm23.exe
Result: invalid   
Time: 0:00:00.256825 tm23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880110b0
=>  Loading section .init, size 0x48 lma ffffffff88011120
=>  Loading section .fini, size 0x30 lma ffffffff88011168
=>  Loading section .ctors, size 0x8 lma ffffffff88011198
=>  Loading section .dtors, size 0x8 lma ffffffff880111a0
=>  Loading section .rdata, size 0x200d lma ffffffff880111b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880131c0
=>  Loading section .data, size 0x470 lma ffffffff880131d8
=>  Start address ffffffff88000004
=>  Transfer rate: 635368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm23.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 562/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:560  W:0    | mipstx39/jmr3904: tm24.exe
Result: invalid   
Time: 0:00:00.515812 tm24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf4b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f4b0
=>  Loading section .init, size 0x48 lma ffffffff8800f520
=>  Loading section .fini, size 0x30 lma ffffffff8800f568
=>  Loading section .ctors, size 0x8 lma ffffffff8800f598
=>  Loading section .dtors, size 0x8 lma ffffffff8800f5a0
=>  Loading section .rdata, size 0x1e09 lma ffffffff8800f5b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880113c0
=>  Loading section .data, size 0x408 lma ffffffff880113d8
=>  Start address ffffffff88000004
=>  Transfer rate: 573064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm24.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 563/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:560  W:0    | mipstx39/jmr3904: tm25.exe
Result: invalid   
Time: 0:00:00.256387 tm25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x106a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880106a0
=>  Loading section .init, size 0x48 lma ffffffff88010710
=>  Loading section .fini, size 0x30 lma ffffffff88010758
=>  Loading section .ctors, size 0x8 lma ffffffff88010788
=>  Loading section .dtors, size 0x8 lma ffffffff88010790
=>  Loading section .rdata, size 0x1e31 lma ffffffff880107a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880125d8
=>  Loading section .data, size 0x448 lma ffffffff880125f0
=>  Start address ffffffff88000004
=>  Transfer rate: 610632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm25.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 564/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:560  W:0    | mipstx39/jmr3904: tm26.exe
Result: invalid   
Time: 0:00:00.261823 tm26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18b40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88018b40
=>  Loading section .init, size 0x48 lma ffffffff88018bb0
=>  Loading section .fini, size 0x30 lma ffffffff88018bf8
=>  Loading section .ctors, size 0x8 lma ffffffff88018c28
=>  Loading section .dtors, size 0x8 lma ffffffff88018c30
=>  Loading section .rdata, size 0x2868 lma ffffffff88018c40
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801b4a8
=>  Loading section .data, size 0x5d8 lma ffffffff8801b4c0
=>  Start address ffffffff88000004
=>  Transfer rate: 906368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm26.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 565/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:560  W:0    | mipstx39/jmr3904: tm27.exe
Result: invalid   
Time: 0:00:00.251741 tm27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d00 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010d00
=>  Loading section .init, size 0x48 lma ffffffff88010d70
=>  Loading section .fini, size 0x30 lma ffffffff88010db8
=>  Loading section .ctors, size 0x8 lma ffffffff88010de8
=>  Loading section .dtors, size 0x8 lma ffffffff88010df0
=>  Loading section .rdata, size 0x1f41 lma ffffffff88010e00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012d48
=>  Loading section .data, size 0x418 lma ffffffff88012d60
=>  Start address ffffffff88000004
=>  Transfer rate: 625480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm27.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 566/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:560  W:0    | mipstx39/jmr3904: tm28.exe
Result: invalid   
Time: 0:00:00.255049 tm28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf770 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f770
=>  Loading section .init, size 0x48 lma ffffffff8800f7e0
=>  Loading section .fini, size 0x30 lma ffffffff8800f828
=>  Loading section .ctors, size 0x8 lma ffffffff8800f858
=>  Loading section .dtors, size 0x8 lma ffffffff8800f860
=>  Loading section .rdata, size 0x1e21 lma ffffffff8800f870
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011698
=>  Loading section .data, size 0x438 lma ffffffff880116b0
=>  Start address ffffffff88000004
=>  Transfer rate: 579272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm28.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 567/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:560  W:0    | mipstx39/jmr3904: tm29.exe
Result: invalid   
Time: 0:00:00.251646 tm29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880103b0
=>  Loading section .init, size 0x48 lma ffffffff88010420
=>  Loading section .fini, size 0x30 lma ffffffff88010468
=>  Loading section .ctors, size 0x8 lma ffffffff88010498
=>  Loading section .dtors, size 0x8 lma ffffffff880104a0
=>  Loading section .rdata, size 0x1f41 lma ffffffff880104b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123f8
=>  Loading section .data, size 0x438 lma ffffffff88012410
=>  Start address ffffffff88000004
=>  Transfer rate: 606664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm29.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 568/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:560  W:0    | mipstx39/jmr3904: tm30.exe
Result: invalid   
Time: 0:00:00.260412 tm30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf8b0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f8b0
=>  Loading section .init, size 0x48 lma ffffffff8800f920
=>  Loading section .fini, size 0x30 lma ffffffff8800f968
=>  Loading section .ctors, size 0x8 lma ffffffff8800f998
=>  Loading section .dtors, size 0x8 lma ffffffff8800f9a0
=>  Loading section .rdata, size 0x1e19 lma ffffffff8800f9b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880117d0
=>  Loading section .data, size 0x438 lma ffffffff880117e8
=>  Start address ffffffff88000004
=>  Transfer rate: 581768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm30.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 569/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:560  W:0    | mipstx39/jmr3904: tm31.exe
Result: invalid   
Time: 0:00:00.268335 tm31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1eb5 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123c8
=>  Loading section .data, size 0x438 lma ffffffff880123e0
=>  Start address ffffffff88000004
=>  Transfer rate: 606312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm31.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 570/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:563  W:0    | mipstx39/jmr3904: tm32.exe
Result: invalid   
Time: 0:00:00.269108 tm32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010950
=>  Loading section .init, size 0x48 lma ffffffff880109c0
=>  Loading section .fini, size 0x30 lma ffffffff88010a08
=>  Loading section .ctors, size 0x8 lma ffffffff88010a38
=>  Loading section .dtors, size 0x8 lma ffffffff88010a40
=>  Loading section .rdata, size 0x1e7d lma ffffffff88010a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128d0
=>  Loading section .data, size 0x438 lma ffffffff880128e8
=>  Start address ffffffff88000004
=>  Transfer rate: 616616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm32.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 571/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:564  W:0    | mipstx39/jmr3904: tm33.exe
Result: invalid   
Time: 0:00:00.273977 tm33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1ead lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123c0
=>  Loading section .data, size 0x438 lma ffffffff880123d8
=>  Start address ffffffff88000004
=>  Transfer rate: 606248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm33.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 572/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:565  W:0    | mipstx39/jmr3904: tm34.exe
Result: invalid   
Time: 0:00:00.282210 tm34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010950
=>  Loading section .init, size 0x48 lma ffffffff880109c0
=>  Loading section .fini, size 0x30 lma ffffffff88010a08
=>  Loading section .ctors, size 0x8 lma ffffffff88010a38
=>  Loading section .dtors, size 0x8 lma ffffffff88010a40
=>  Loading section .rdata, size 0x1e7d lma ffffffff88010a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128d0
=>  Loading section .data, size 0x438 lma ffffffff880128e8
=>  Start address ffffffff88000004
=>  Transfer rate: 616616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm34.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 573/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:568  W:0    | mipstx39/jmr3904: tm35.exe
Result: invalid   
Time: 0:00:00.267559 tm35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010410
=>  Loading section .init, size 0x48 lma ffffffff88010480
=>  Loading section .fini, size 0x30 lma ffffffff880104c8
=>  Loading section .ctors, size 0x8 lma ffffffff880104f8
=>  Loading section .dtors, size 0x8 lma ffffffff88010500
=>  Loading section .rdata, size 0x1eb5 lma ffffffff88010510
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880123c8
=>  Loading section .data, size 0x438 lma ffffffff880123e0
=>  Start address ffffffff88000004
=>  Transfer rate: 606312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm35.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 574/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:568  W:0    | mipstx39/jmr3904: tm36.exe
Result: invalid   
Time: 0:00:00.251318 tm36.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10950 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010950
=>  Loading section .init, size 0x48 lma ffffffff880109c0
=>  Loading section .fini, size 0x30 lma ffffffff88010a08
=>  Loading section .ctors, size 0x8 lma ffffffff88010a38
=>  Loading section .dtors, size 0x8 lma ffffffff88010a40
=>  Loading section .rdata, size 0x1e7d lma ffffffff88010a50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880128d0
=>  Loading section .data, size 0x438 lma ffffffff880128e8
=>  Start address ffffffff88000004
=>  Transfer rate: 616616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tm36.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 575/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:570  W:0    | mipstx39/jmr3904: tmck.exe
Result: invalid   
Time: 0:00:00.292012 tmck.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf540 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f540
=>  Loading section .init, size 0x48 lma ffffffff8800f5b0
=>  Loading section .fini, size 0x30 lma ffffffff8800f5f8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f628
=>  Loading section .dtors, size 0x8 lma ffffffff8800f630
=>  Loading section .rdata, size 0x1ef5 lma ffffffff8800f640
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011538
=>  Loading section .data, size 0x408 lma ffffffff88011550
=>  Start address ffffffff88000004
=>  Transfer rate: 576104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmck.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 576/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:571  W:0    | mipstx39/jmr3904: tmcontext01.exe
Result: invalid   
Time: 0:00:00.253960 tmcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff880100c0
=>  Loading section .init, size 0x48 lma ffffffff88010130
=>  Loading section .fini, size 0x30 lma ffffffff88010178
=>  Loading section .ctors, size 0x8 lma ffffffff880101a8
=>  Loading section .dtors, size 0x8 lma ffffffff880101b0
=>  Loading section .rdata, size 0x1ab9 lma ffffffff880101c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011c80
=>  Loading section .data, size 0x408 lma ffffffff88011c98
=>  Start address ffffffff88000004
=>  Transfer rate: 590984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 577/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:571  W:0    | mipstx39/jmr3904: tmfine01.exe
Result: invalid   
Time: 0:00:00.263881 tmfine01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c40 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88014c40
=>  Loading section .init, size 0x48 lma ffffffff88014cc0
=>  Loading section .fini, size 0x30 lma ffffffff88014d08
=>  Loading section .ctors, size 0x8 lma ffffffff88014d38
=>  Loading section .dtors, size 0x8 lma ffffffff88014d40
=>  Loading section .rdata, size 0x1c99 lma ffffffff88014d50
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880169f0
=>  Loading section .data, size 0x4a8 lma ffffffff88016a08
=>  Start address ffffffff88000004
=>  Transfer rate: 750856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmfine01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 578/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:571  W:0    | mipstx39/jmr3904: tmonetoone.exe
Result: invalid   
Time: 0:00:00.260613 tmonetoone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11de0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88011de0
=>  Loading section .init, size 0x48 lma ffffffff88011e50
=>  Loading section .fini, size 0x30 lma ffffffff88011e98
=>  Loading section .ctors, size 0x8 lma ffffffff88011ec8
=>  Loading section .dtors, size 0x8 lma ffffffff88011ed0
=>  Loading section .rdata, size 0x1ab1 lma ffffffff88011ee0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013998
=>  Loading section .data, size 0x448 lma ffffffff880139b0
=>  Start address ffffffff88000004
=>  Transfer rate: 651080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmonetoone.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 579/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:573  W:0    | mipstx39/jmr3904: tmtimer01.exe
Result: invalid   
Time: 0:00:00.253675 tmtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a70 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88010a70
=>  Loading section .init, size 0x48 lma ffffffff88010af0
=>  Loading section .fini, size 0x30 lma ffffffff88010b38
=>  Loading section .ctors, size 0x8 lma ffffffff88010b68
=>  Loading section .dtors, size 0x8 lma ffffffff88010b70
=>  Loading section .rdata, size 0x1afc lma ffffffff88010b80
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012680
=>  Loading section .data, size 0x448 lma ffffffff88012698
=>  Start address ffffffff88000004
=>  Transfer rate: 612000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/tmtests/tmtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 580/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:573  W:0    | mipstx39/jmr3904: ts-unit-no-clock-0.exe
Result: invalid   
Time: 0:00:00.320427 ts-unit-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xdd90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800dd90
=>  Loading section .init, size 0x48 lma ffffffff8800de10
=>  Loading section .fini, size 0x30 lma ffffffff8800de58
=>  Loading section .ctors, size 0x8 lma ffffffff8800de88
=>  Loading section .dtors, size 0x8 lma ffffffff8800de90
=>  Loading section .rdata, size 0x4a60 lma ffffffff8800dea0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012900
=>  Loading section .data, size 0x248 lma ffffffff88012918
=>  Start address ffffffff88000004
=>  Transfer rate: 613056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/unit/ts-unit-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 581/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:573  W:0    | mipstx39/jmr3904: ts-fatal-init-task-construct-failed.exe
Result: invalid   
Time: 0:00:00.329757 ts-fatal-init-task-construct-failed.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xb6d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800b6d0
=>  Loading section .init, size 0x48 lma ffffffff8800b750
=>  Loading section .fini, size 0x30 lma ffffffff8800b798
=>  Loading section .ctors, size 0x8 lma ffffffff8800b7c8
=>  Loading section .dtors, size 0x8 lma ffffffff8800b7d0
=>  Loading section .rdata, size 0x19b8 lma ffffffff8800b7e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800d198
=>  Loading section .data, size 0x22c lma ffffffff8800d1b0
=>  Start address ffffffff88000004
=>  Transfer rate: 433824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-init-task-construct-failed.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 582/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:573  W:0    | mipstx39/jmr3904: ts-fatal-too-large-tls-size.exe
Result: invalid   
Time: 0:00:00.283733 ts-fatal-too-large-tls-size.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x8d10 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88008d10
=>  Loading section .init, size 0x48 lma ffffffff88008d80
=>  Loading section .fini, size 0x30 lma ffffffff88008dc8
=>  Loading section .ctors, size 0x8 lma ffffffff88008df8
=>  Loading section .dtors, size 0x8 lma ffffffff88008e00
=>  Loading section .rdata, size 0x1948 lma ffffffff88008e10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800a758
=>  Loading section .data, size 0x204 lma ffffffff8800a770
=>  Start address ffffffff88000004
=>  Transfer rate: 346976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-fatal-too-large-tls-size.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 583/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:578  W:0    | mipstx39/jmr3904: ts-performance-no-clock-0.exe
Result: invalid   
Time: 0:00:00.277527 ts-performance-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x160a0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xa0 lma ffffffff880160a0
=>  Loading section .init, size 0x48 lma ffffffff88016140
=>  Loading section .fini, size 0x30 lma ffffffff88016188
=>  Loading section .ctors, size 0x8 lma ffffffff880161b8
=>  Loading section .dtors, size 0x8 lma ffffffff880161c0
=>  Loading section .rdata, size 0x283c lma ffffffff880161d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88018a10
=>  Loading section .data, size 0x3c4 lma ffffffff88018a28
=>  Start address ffffffff88000004
=>  Transfer rate: 814848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-performance-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 584/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:578  W:0    | mipstx39/jmr3904: ts-terminate.exe
Result: invalid   
Time: 0:00:00.331269 ts-terminate.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf5c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800f5c0
=>  Loading section .init, size 0x48 lma ffffffff8800f630
=>  Loading section .fini, size 0x30 lma ffffffff8800f678
=>  Loading section .ctors, size 0x8 lma ffffffff8800f6a8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f6b0
=>  Loading section .rdata, size 0x1fcc lma ffffffff8800f6c0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011690
=>  Loading section .data, size 0x220 lma ffffffff880116a8
=>  Start address ffffffff88000004
=>  Transfer rate: 574944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-terminate.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 585/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:578  W:0    | mipstx39/jmr3904: ts-userext.exe
Result: invalid   
Time: 0:00:00.262243 ts-userext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e60 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88010e60
=>  Loading section .init, size 0x48 lma ffffffff88010ee0
=>  Loading section .fini, size 0x30 lma ffffffff88010f28
=>  Loading section .ctors, size 0x8 lma ffffffff88010f58
=>  Loading section .dtors, size 0x8 lma ffffffff88010f60
=>  Loading section .rdata, size 0x21f4 lma ffffffff88010f70
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88013168
=>  Loading section .data, size 0x268 lma ffffffff88013180
=>  Start address ffffffff88000004
=>  Transfer rate: 630496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-userext.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 586/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:580  W:0    | mipstx39/jmr3904: ts-validation-0.exe
Result: invalid   
Time: 0:00:00.292431 ts-validation-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13bf0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88013bf0
=>  Loading section .init, size 0x48 lma ffffffff88013c70
=>  Loading section .fini, size 0x30 lma ffffffff88013cb8
=>  Loading section .ctors, size 0x8 lma ffffffff88013ce8
=>  Loading section .dtors, size 0x8 lma ffffffff88013cf0
=>  Loading section .rdata, size 0x25b4 lma ffffffff88013d00
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880162b8
=>  Loading section .data, size 0x39c lma ffffffff880162d0
=>  Start address ffffffff88000004
=>  Transfer rate: 733952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 587/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:579  W:0    | mipstx39/jmr3904: ts-validation-1.exe
Result: invalid   
Time: 0:00:00.277360 ts-validation-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff880109d0
=>  Loading section .init, size 0x48 lma ffffffff88010a50
=>  Loading section .fini, size 0x30 lma ffffffff88010a98
=>  Loading section .ctors, size 0x8 lma ffffffff88010ac8
=>  Loading section .dtors, size 0x8 lma ffffffff88010ad0
=>  Loading section .rdata, size 0xe4b8 lma ffffffff88010ae0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801ef98
=>  Loading section .data, size 0x268 lma ffffffff8801efb0
=>  Start address ffffffff88000004
=>  Transfer rate: 1020032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 588/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:581  W:0    | mipstx39/jmr3904: ts-validation-acfg-0.exe
Result: invalid   
Time: 0:00:00.256147 ts-validation-acfg-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xcac0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x90 lma ffffffff8800cac0
=>  Loading section .init, size 0x48 lma ffffffff8800cb50
=>  Loading section .fini, size 0x30 lma ffffffff8800cb98
=>  Loading section .ctors, size 0x8 lma ffffffff8800cbc8
=>  Loading section .dtors, size 0x8 lma ffffffff8800cbd0
=>  Loading section .rdata, size 0x1d68 lma ffffffff8800cbe0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800e948
=>  Loading section .data, size 0x32c lma ffffffff8800e960
=>  Start address ffffffff88000004
=>  Transfer rate: 484384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 589/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:581  W:0    | mipstx39/jmr3904: ts-validation-acfg-1.exe
Result: invalid   
Time: 0:00:00.260655 ts-validation-acfg-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xb3e0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff8800b3e0
=>  Loading section .init, size 0x48 lma ffffffff8800b450
=>  Loading section .fini, size 0x30 lma ffffffff8800b498
=>  Loading section .ctors, size 0x8 lma ffffffff8800b4c8
=>  Loading section .dtors, size 0x8 lma ffffffff8800b4d0
=>  Loading section .rdata, size 0x193c lma ffffffff8800b4e0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800ce20
=>  Loading section .data, size 0x1cc lma ffffffff8800ce38
=>  Start address ffffffff88000004
=>  Transfer rate: 425920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-acfg-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 590/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:581  W:0    | mipstx39/jmr3904: ts-validation-cache.exe
Result: invalid   
Time: 0:00:00.254789 ts-validation-cache.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf330 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800f330
=>  Loading section .init, size 0x48 lma ffffffff8800f3b0
=>  Loading section .fini, size 0x30 lma ffffffff8800f3f8
=>  Loading section .ctors, size 0x8 lma ffffffff8800f428
=>  Loading section .dtors, size 0x8 lma ffffffff8800f430
=>  Loading section .rdata, size 0x1e54 lma ffffffff8800f440
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88011298
=>  Loading section .data, size 0x254 lma ffffffff880112b0
=>  Start address ffffffff88000004
=>  Transfer rate: 567232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-cache.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 591/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:587  W:0    | mipstx39/jmr3904: ts-validation-intr.exe
Result: invalid   
Time: 0:00:00.256101 ts-validation-intr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15d90 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xb0 lma ffffffff88015d90
=>  Loading section .init, size 0x48 lma ffffffff88015e40
=>  Loading section .fini, size 0x30 lma ffffffff88015e88
=>  Loading section .ctors, size 0x8 lma ffffffff88015eb8
=>  Loading section .dtors, size 0x8 lma ffffffff88015ec0
=>  Loading section .rdata, size 0x4584 lma ffffffff88015ed0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801a458
=>  Loading section .data, size 0x438 lma ffffffff8801a470
=>  Start address ffffffff88000004
=>  Transfer rate: 869600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-intr.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 592/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:589  W:0    | mipstx39/jmr3904: ts-validation-io-kernel.exe
Result: invalid   
Time: 0:00:00.257445 ts-validation-io-kernel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x7b20 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x60 lma ffffffff88007b20
=>  Loading section .init, size 0x48 lma ffffffff88007b80
=>  Loading section .fini, size 0x30 lma ffffffff88007bc8
=>  Loading section .ctors, size 0x8 lma ffffffff88007bf8
=>  Loading section .dtors, size 0x8 lma ffffffff88007c00
=>  Loading section .rdata, size 0x1834 lma ffffffff88007c10
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88009448
=>  Loading section .data, size 0x7c lma ffffffff88009460
=>  Start address ffffffff88000004
=>  Transfer rate: 304768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-io-kernel.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 593/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:589  W:0    | mipstx39/jmr3904: ts-validation-no-clock-0.exe
Result: invalid   
Time: 0:00:00.504833 ts-validation-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x491d0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x250 lma ffffffff880491d0
=>  Loading section .init, size 0x48 lma ffffffff88049420
=>  Loading section .fini, size 0x30 lma ffffffff88049468
=>  Loading section .ctors, size 0x8 lma ffffffff88049498
=>  Loading section .dtors, size 0x8 lma ffffffff880494a0
=>  Loading section .rdata, size 0x19ec4 lma ffffffff880494b0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88063378
=>  Loading section .data, size 0x1390 lma ffffffff88063390
=>  Loading section .rtemsrwset, size 0x4 lma ffffffff88064720
=>  Start address ffffffff88000004
=>  Transfer rate: 3291328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 594/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:589  W:0    | mipstx39/jmr3904: ts-validation-non-smp.exe
Result: invalid   
Time: 0:00:00.265432 ts-validation-non-smp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xebe0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800ebe0
=>  Loading section .init, size 0x48 lma ffffffff8800ec60
=>  Loading section .fini, size 0x30 lma ffffffff8800eca8
=>  Loading section .ctors, size 0x8 lma ffffffff8800ecd8
=>  Loading section .dtors, size 0x8 lma ffffffff8800ece0
=>  Loading section .rdata, size 0x1ecc lma ffffffff8800ecf0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010bc0
=>  Loading section .data, size 0x264 lma ffffffff88010bd8
=>  Start address ffffffff88000004
=>  Transfer rate: 553344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-non-smp.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 595/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:589  W:0    | mipstx39/jmr3904: ts-validation-one-cpu-0.exe
Result: invalid   
Time: 0:00:00.269385 ts-validation-one-cpu-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19f50 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0xc0 lma ffffffff88019f50
=>  Loading section .init, size 0x48 lma ffffffff8801a010
=>  Loading section .fini, size 0x30 lma ffffffff8801a058
=>  Loading section .ctors, size 0x8 lma ffffffff8801a088
=>  Loading section .dtors, size 0x8 lma ffffffff8801a090
=>  Loading section .rdata, size 0x6058 lma ffffffff8801a0a0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff880200f8
=>  Loading section .data, size 0x484 lma ffffffff88020110
=>  Start address ffffffff88000004
=>  Transfer rate: 1059936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 596/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:589  W:0    | mipstx39/jmr3904: ts-validation-one-cpu-1.exe
Result: invalid   
Time: 0:00:00.259289 ts-validation-one-cpu-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf3c0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800f3c0
=>  Loading section .init, size 0x48 lma ffffffff8800f440
=>  Loading section .fini, size 0x30 lma ffffffff8800f488
=>  Loading section .ctors, size 0x8 lma ffffffff8800f4b8
=>  Loading section .dtors, size 0x8 lma ffffffff8800f4c0
=>  Loading section .rdata, size 0xe530 lma ffffffff8800f4d0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8801da00
=>  Loading section .data, size 0x25c lma ffffffff8801da18
=>  Start address ffffffff88000004
=>  Transfer rate: 975712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-one-cpu-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 597/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:589  W:0    | mipstx39/jmr3904: ts-validation-timecounter-0.exe
Result: invalid   
Time: 0:00:00.287172 ts-validation-timecounter-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10390 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x70 lma ffffffff88010390
=>  Loading section .init, size 0x48 lma ffffffff88010400
=>  Loading section .fini, size 0x30 lma ffffffff88010448
=>  Loading section .ctors, size 0x8 lma ffffffff88010478
=>  Loading section .dtors, size 0x8 lma ffffffff88010480
=>  Loading section .rdata, size 0x24c0 lma ffffffff88010490
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88012950
=>  Loading section .data, size 0x248 lma ffffffff88012968
=>  Start address ffffffff88000004
=>  Transfer rate: 613696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 598/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:589  W:0    | mipstx39/jmr3904: ts-validation-timecounter-1.exe
Result: invalid   
Time: 0:00:00.328641 ts-validation-timecounter-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12100 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88012100
=>  Loading section .init, size 0x48 lma ffffffff88012180
=>  Loading section .fini, size 0x30 lma ffffffff880121c8
=>  Loading section .ctors, size 0x8 lma ffffffff880121f8
=>  Loading section .dtors, size 0x8 lma ffffffff88012200
=>  Loading section .rdata, size 0x1f5c lma ffffffff88012210
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88014170
=>  Loading section .data, size 0x2fc lma ffffffff88014188
=>  Start address ffffffff88000004
=>  Transfer rate: 664512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-timecounter-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 599/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:593  W:0    | mipstx39/jmr3904: ts-validation-tls-0.exe
Result: invalid   
Time: 0:00:00.279736 ts-validation-tls-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeba0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff8800eba0
=>  Loading section .init, size 0x48 lma ffffffff8800ec20
=>  Loading section .fini, size 0x30 lma ffffffff8800ec68
=>  Loading section .ctors, size 0x8 lma ffffffff8800ec98
=>  Loading section .dtors, size 0x8 lma ffffffff8800eca0
=>  Loading section .rdata, size 0x1e68 lma ffffffff8800ecb0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff88010b18
=>  Loading section .tdata, size 0x10 lma ffffffff88010c00
=>  Loading section .data, size 0x254 lma ffffffff88010d00
=>  Start address ffffffff88000004
=>  Transfer rate: 552032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-0.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 600/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:594  W:0    | mipstx39/jmr3904: ts-validation-tls-1.exe
Result: invalid   
Time: 0:00:00.566796 ts-validation-tls-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe
=>  Reading symbols from ./b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x8ca0 lma ffffffff88000000
=>  Loading section .rtemsroset, size 0x80 lma ffffffff88008ca0
=>  Loading section .init, size 0x48 lma ffffffff88008d20
=>  Loading section .fini, size 0x30 lma ffffffff88008d68
=>  Loading section .ctors, size 0x8 lma ffffffff88008d98
=>  Loading section .dtors, size 0x8 lma ffffffff88008da0
=>  Loading section .rdata, size 0x198c lma ffffffff88008db0
=>  Loading section .MIPS.abiflags, size 0x18 lma ffffffff8800a740
=>  Loading section .tdata, size 0x10 lma ffffffff8800a800
=>  Loading section .data, size 0x20c lma ffffffff8800a900
=>  Start address ffffffff88000004
=>  Transfer rate: 346944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-jmr3904/mips/jmr3904/testsuites/validation/ts-validation-tls-1.exe 
=>  mips-core: 4 byte read to unmapped address 0xffffffff88000004 at 0xffffffff88000004
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/mips/jmr3904/start/start.S:57
=>  57		bal     $LF1
[ 601/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:594  W:0    | mipstx39/jmr3904: dhrystone.exe
Result: invalid   
Time: 0:00:00.511102 dhrystone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/benchmarks/dhrystone.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/benchmarks/dhrystone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17a50 lma 40000000
=>  Loading section .tdata, size 0xc lma 40017a50
=>  Loading section .rtemsroset, size 0x80 lma 40017a60
=>  Loading section .data, size 0x4b0 lma 4001a0c0
=>  Start address 40000000
=>  Transfer rate: 785504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/benchmarks/dhrystone.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 602/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:594  W:0    | mipstx39/jmr3904: linpack.exe
Result: invalid   
Time: 0:00:00.574179 linpack.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/benchmarks/linpack.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/benchmarks/linpack.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18ab0 lma 40000000
=>  Loading section .tdata, size 0xc lma 40018ab0
=>  Loading section .rtemsroset, size 0x80 lma 40018ac0
=>  Loading section .data, size 0x4b0 lma 4001b100
=>  Start address 40000000
=>  Transfer rate: 819040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/benchmarks/linpack.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 603/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:597  W:0    | mipstx39/jmr3904: whetstone.exe
Result: invalid   
Time: 0:00:00.268779 whetstone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/benchmarks/whetstone.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/benchmarks/whetstone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17cf0 lma 40000000
=>  Loading section .tdata, size 0xc lma 40017cf0
=>  Loading section .rtemsroset, size 0x80 lma 40017d00
=>  Loading section .data, size 0x4c0 lma 4001a340
=>  Start address 40000000
=>  Transfer rate: 791008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/benchmarks/whetstone.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 604/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:597  W:0    | mipstx39/jmr3904: fsbdpart01.exe
Result: invalid   
Time: 0:00:00.572712 fsbdpart01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsbdpart01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsbdpart01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1fa30 lma 40000000
=>  Loading section .tdata, size 0xc lma 4001fa30
=>  Loading section .rtemsroset, size 0x80 lma 4001fa40
=>  Loading section .data, size 0x500 lma 40022640
=>  Start address 40000000
=>  Transfer rate: 1048032 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsbdpart01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 605/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:597  W:0    | mipstx39/jmr3904: fsclose01.exe
Result: invalid   
Time: 0:00:00.287081 fsclose01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsclose01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsclose01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x184c0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400184c0
=>  Loading section .rtemsroset, size 0x80 lma 400184d0
=>  Loading section .data, size 0x4b0 lma 4001ae00
=>  Start address 40000000
=>  Transfer rate: 806880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsclose01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 606/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:597  W:0    | mipstx39/jmr3904: fsdosfsformat01.exe
Result: invalid   
Time: 0:00:00.510565 fsdosfsformat01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfsformat01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfsformat01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27170 lma 40000000
=>  Loading section .tdata, size 0x14 lma 40027170
=>  Loading section .rtemsroset, size 0x78 lma 40027188
=>  Loading section .data, size 0x4e0 lma 40029ac0
=>  Start address 40000000
=>  Transfer rate: 1292000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsdosfsformat01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 607/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:598  W:0    | mipstx39/jmr3904: fsdosfsname01.exe
Result: invalid   
Time: 0:00:00.533426 fsdosfsname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfsname01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfsname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c0d0 lma 40000000
=>  Loading section .tdata, size 0x14 lma 4014c0d0
=>  Loading section .rtemsroset, size 0x78 lma 4014c0e8
=>  Loading section .data, size 0x2c3c0 lma 4014ea00
=>  Start address 40000000
=>  Transfer rate: 12331232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsdosfsname01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 608/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:600  W:0    | mipstx39/jmr3904: fsdosfsname02.exe
Result: invalid   
Time: 0:00:00.518995 fsdosfsname02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfsname02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfsname02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x223b0 lma 40000000
=>  Loading section .tdata, size 0x14 lma 400223b0
=>  Loading section .rtemsroset, size 0x78 lma 400223c8
=>  Loading section .data, size 0x4d0 lma 40024d00
=>  Start address 40000000
=>  Transfer rate: 1132640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsdosfsname02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 609/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:600  W:0    | mipstx39/jmr3904: fsdosfssync01.exe
Result: invalid   
Time: 0:00:00.251789 fsdosfssync01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfssync01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfssync01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23180 lma 40000000
=>  Loading section .tdata, size 0x14 lma 40023180
=>  Loading section .rtemsroset, size 0x78 lma 40023198
=>  Loading section .data, size 0x500 lma 40025dc0
=>  Start address 40000000
=>  Transfer rate: 1161312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsdosfssync01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 610/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:605  W:0    | mipstx39/jmr3904: fsdosfswrite01.exe
Result: invalid   
Time: 0:00:00.533004 fsdosfswrite01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfswrite01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsdosfswrite01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24350 lma 40000000
=>  Loading section .tdata, size 0x14 lma 40024350
=>  Loading section .rtemsroset, size 0x78 lma 40024368
=>  Loading section .data, size 0x4e0 lma 400280c0
=>  Start address 40000000
=>  Transfer rate: 1197536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsdosfswrite01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 611/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:605  W:0    | mipstx39/jmr3904: fsfseeko01.exe
Result: invalid   
Time: 0:00:00.275290 fsfseeko01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsfseeko01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsfseeko01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d00 lma 40000000
=>  Loading section .tdata, size 0xc lma 40010d00
=>  Loading section .rtemsroset, size 0x80 lma 40010d10
=>  Loading section .data, size 0x310 lma 40013380
=>  Start address 40000000
=>  Transfer rate: 558304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsfseeko01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 612/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:605  W:0    | mipstx39/jmr3904: fsimfsconfig01.exe
Result: invalid   
Time: 0:00:00.251325 fsimfsconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsimfsconfig01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsimfsconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf250 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f250
=>  Loading section .data, size 0x2a0 lma 40011880
=>  Start address 40000000
=>  Transfer rate: 502528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsimfsconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 613/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:606  W:0    | mipstx39/jmr3904: fsimfsconfig02.exe
Result: invalid   
Time: 0:00:00.317092 fsimfsconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsimfsconfig02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsimfsconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe810 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e810
=>  Loading section .data, size 0x2e0 lma 40010e40
=>  Start address 40000000
=>  Transfer rate: 482048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsimfsconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 614/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:606  W:0    | mipstx39/jmr3904: fsimfsconfig03.exe
Result: invalid   
Time: 0:00:00.285558 fsimfsconfig03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsimfsconfig03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsimfsconfig03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf280 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f280
=>  Loading section .data, size 0x2a0 lma 400118c0
=>  Start address 40000000
=>  Transfer rate: 502912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsimfsconfig03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 615/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:609  W:0    | mipstx39/jmr3904: fsimfsgeneric01.exe
Result: invalid   
Time: 0:00:00.504765 fsimfsgeneric01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsimfsgeneric01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsimfsgeneric01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11500 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011500
=>  Loading section .data, size 0x340 lma 40013b40
=>  Start address 40000000
=>  Transfer rate: 574976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsimfsgeneric01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 616/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:609  W:0    | mipstx39/jmr3904: fsjffs2gc01.exe
Result: invalid   
Time: 0:00:00.255095 fsjffs2gc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsjffs2gc01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsjffs2gc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20e60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40020e60
=>  Loading section .data, size 0x213b0 lma 400234c0
=>  Start address 40000000
=>  Transfer rate: 2167936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsjffs2gc01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 617/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:610  W:0    | mipstx39/jmr3904: fsnofs01.exe
Result: invalid   
Time: 0:00:00.272057 fsnofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsnofs01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsnofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe4c0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e4c0
=>  Loading section .data, size 0x2e0 lma 40010b00
=>  Start address 40000000
=>  Transfer rate: 475264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsnofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 618/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:609  W:0    | mipstx39/jmr3904: fsrfsbitmap01.exe
Result: invalid   
Time: 0:00:00.273833 fsrfsbitmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsrfsbitmap01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsrfsbitmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23010 lma 40000000
=>  Loading section .tdata, size 0x8 lma 40023010
=>  Loading section .rtemsroset, size 0x78 lma 40023018
=>  Loading section .data, size 0x380 lma 40027340
=>  Start address 40000000
=>  Transfer rate: 1155200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsrfsbitmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 619/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:614  W:0    | mipstx39/jmr3904: fsrofs01.exe
Result: invalid   
Time: 0:00:00.508819 fsrofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/fsrofs01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/fsrofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x210f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400210f0
=>  Loading section .data, size 0x360 lma 40023d00
=>  Start address 40000000
=>  Transfer rate: 1091200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/fsrofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 620/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:616  W:0    | mipstx39/jmr3904: imfs_fserror.exe
Result: invalid   
Time: 0:00:00.294368 imfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fserror.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16e60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40016e60
=>  Loading section .data, size 0x4b0 lma 4001ae80
=>  Start address 40000000
=>  Transfer rate: 760960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/imfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 621/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:616  W:0    | mipstx39/jmr3904: imfs_fslink.exe
Result: invalid   
Time: 0:00:00.507152 imfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fslink.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fc60
=>  Loading section .data, size 0x340 lma 40013c80
=>  Start address 40000000
=>  Transfer rate: 524544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/imfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 622/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:616  W:0    | mipstx39/jmr3904: imfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.518839 imfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fspatheval.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10810 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010810
=>  Loading section .data, size 0x340 lma 40014840
=>  Start address 40000000
=>  Transfer rate: 548480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/imfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 623/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:616  W:0    | mipstx39/jmr3904: imfs_fspermission.exe
Result: invalid   
Time: 0:00:00.262239 imfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fspermission.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16dc0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40016dc0
=>  Loading section .data, size 0x4b0 lma 4001ae00
=>  Start address 40000000
=>  Transfer rate: 759680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/imfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 624/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:616  W:0    | mipstx39/jmr3904: imfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.262344 imfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fsrdwr.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12a40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012a40
=>  Loading section .data, size 0x340 lma 40016a80
=>  Start address 40000000
=>  Transfer rate: 618496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/imfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 625/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:616  W:0    | mipstx39/jmr3904: imfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.503003 imfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fsscandir01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10670 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010670
=>  Loading section .data, size 0x340 lma 400146c0
=>  Start address 40000000
=>  Transfer rate: 545152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/imfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 626/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:618  W:0    | mipstx39/jmr3904: imfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.264852 imfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fssymlink.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400102b0
=>  Loading section .data, size 0x340 lma 40014300
=>  Start address 40000000
=>  Transfer rate: 537472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/imfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 627/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:618  W:0    | mipstx39/jmr3904: imfs_fstime.exe
Result: invalid   
Time: 0:00:00.513262 imfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fstime.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/imfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010d60
=>  Loading section .data, size 0x350 lma 40014d80
=>  Start address 40000000
=>  Transfer rate: 559488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/imfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 628/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:622  W:0    | mipstx39/jmr3904: jffs2_fserror.exe
Result: invalid   
Time: 0:00:00.515965 jffs2_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fserror.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27d60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40027d60
=>  Loading section .data, size 0x21510 lma 4002a3c0
=>  Start address 40000000
=>  Transfer rate: 2398080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/jffs2_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 629/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:622  W:0    | mipstx39/jmr3904: jffs2_fslink.exe
Result: invalid   
Time: 0:00:00.556209 jffs2_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fslink.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20bf0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40020bf0
=>  Loading section .data, size 0x213a0 lma 40023240
=>  Start address 40000000
=>  Transfer rate: 2162816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/jffs2_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 630/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:623  W:0    | mipstx39/jmr3904: jffs2_fspatheval.exe
Result: invalid   
Time: 0:00:00.523171 jffs2_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fspatheval.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x217e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400217e0
=>  Loading section .data, size 0x213a0 lma 40023e40
=>  Start address 40000000
=>  Transfer rate: 2187264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/jffs2_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 631/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:622  W:0    | mipstx39/jmr3904: jffs2_fspermission.exe
Result: invalid   
Time: 0:00:00.506586 jffs2_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fspermission.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27cc0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40027cc0
=>  Loading section .data, size 0x21510 lma 4002a300
=>  Start address 40000000
=>  Transfer rate: 2396800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/jffs2_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 632/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:626  W:0    | mipstx39/jmr3904: jffs2_fsrdwr.exe
Result: invalid   
Time: 0:00:00.264693 jffs2_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fsrdwr.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x238d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400238d0
=>  Loading section .data, size 0x213b0 lma 40025f40
=>  Start address 40000000
=>  Transfer rate: 2254848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/jffs2_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 633/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:626  W:0    | mipstx39/jmr3904: jffs2_fsscandir01.exe
Result: invalid   
Time: 0:00:00.262861 jffs2_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fsscandir01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21630 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40021630
=>  Loading section .data, size 0x213a0 lma 40023c80
=>  Start address 40000000
=>  Transfer rate: 2183808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/jffs2_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 634/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:626  W:0    | mipstx39/jmr3904: jffs2_fssymlink.exe
Result: invalid   
Time: 0:00:00.256093 jffs2_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fssymlink.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21150 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40021150
=>  Loading section .data, size 0x213a0 lma 400237c0
=>  Start address 40000000
=>  Transfer rate: 2173824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/jffs2_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 635/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:628  W:0    | mipstx39/jmr3904: jffs2_fstime.exe
Result: invalid   
Time: 0:00:00.263307 jffs2_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fstime.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/jffs2_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21ce0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40021ce0
=>  Loading section .data, size 0x213b0 lma 40024340
=>  Start address 40000000
=>  Transfer rate: 2197632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/jffs2_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 636/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:629  W:0    | mipstx39/jmr3904: mdosfs_fserror.exe
Result: invalid   
Time: 0:00:00.258281 mdosfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fserror.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28130 lma 40000000
=>  Loading section .tdata, size 0x14 lma 40028130
=>  Loading section .rtemsroset, size 0x78 lma 40028148
=>  Loading section .data, size 0x540 lma 4002c440
=>  Start address 40000000
=>  Transfer rate: 1325024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 637/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:630  W:0    | mipstx39/jmr3904: mdosfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.297116 mdosfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fspatheval.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24700 lma 40000000
=>  Loading section .tdata, size 0x14 lma 40024700
=>  Loading section .rtemsroset, size 0x78 lma 40024718
=>  Loading section .data, size 0x540 lma 40028a40
=>  Start address 40000000
=>  Transfer rate: 1205856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 638/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:632  W:0    | mipstx39/jmr3904: mdosfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.513656 mdosfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fsrdwr.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26a80 lma 40000000
=>  Loading section .tdata, size 0x14 lma 40026a80
=>  Loading section .rtemsroset, size 0x78 lma 40026a98
=>  Loading section .data, size 0x540 lma 4002adc0
=>  Start address 40000000
=>  Transfer rate: 1278560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 639/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:633  W:0    | mipstx39/jmr3904: mdosfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.515998 mdosfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fsscandir01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x248b0 lma 40000000
=>  Loading section .tdata, size 0x14 lma 400248b0
=>  Loading section .rtemsroset, size 0x78 lma 400248c8
=>  Loading section .data, size 0x540 lma 40028bc0
=>  Start address 40000000
=>  Transfer rate: 1209312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 640/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:633  W:0    | mipstx39/jmr3904: mdosfs_fsstatvfs.exe
Result: invalid   
Time: 0:00:00.511692 mdosfs_fsstatvfs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fsstatvfs.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fsstatvfs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23d50 lma 40000000
=>  Loading section .tdata, size 0x14 lma 40023d50
=>  Loading section .rtemsroset, size 0x78 lma 40023d68
=>  Loading section .data, size 0x540 lma 40028080
=>  Start address 40000000
=>  Transfer rate: 1186016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fsstatvfs.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 641/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:633  W:0    | mipstx39/jmr3904: mdosfs_fstime.exe
Result: invalid   
Time: 0:00:00.557565 mdosfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fstime.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24dd0 lma 40000000
=>  Loading section .tdata, size 0x14 lma 40024dd0
=>  Loading section .rtemsroset, size 0x78 lma 40024de8
=>  Loading section .data, size 0x550 lma 40029100
=>  Start address 40000000
=>  Transfer rate: 1219936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mdosfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 642/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:633  W:0    | mipstx39/jmr3904: mimfs_fserror.exe
Result: invalid   
Time: 0:00:00.515721 mimfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fserror.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17920 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40017920
=>  Loading section .data, size 0x4e0 lma 4001b940
=>  Start address 40000000
=>  Transfer rate: 783360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mimfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 643/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:636  W:0    | mipstx39/jmr3904: mimfs_fslink.exe
Result: invalid   
Time: 0:00:00.509850 mimfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fslink.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10740 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010740
=>  Loading section .data, size 0x370 lma 40014780
=>  Start address 40000000
=>  Transfer rate: 547200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mimfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 644/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:636  W:0    | mipstx39/jmr3904: mimfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.264352 mimfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fspatheval.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11300 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011300
=>  Loading section .data, size 0x370 lma 40015340
=>  Start address 40000000
=>  Transfer rate: 571264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mimfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 645/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:636  W:0    | mipstx39/jmr3904: mimfs_fspermission.exe
Result: invalid   
Time: 0:00:00.512484 mimfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fspermission.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17890 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40017890
=>  Loading section .data, size 0x4e0 lma 4001b8c0
=>  Start address 40000000
=>  Transfer rate: 782208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mimfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 646/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:639  W:0    | mipstx39/jmr3904: mimfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.275788 mimfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fsrdwr.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13520 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013520
=>  Loading section .data, size 0x370 lma 40017540
=>  Start address 40000000
=>  Transfer rate: 641152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mimfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 647/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:639  W:0    | mipstx39/jmr3904: mimfs_fsrename.exe
Result: invalid   
Time: 0:00:00.266341 mimfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fsrename.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a920 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001a920
=>  Loading section .data, size 0x4e0 lma 4001e940
=>  Start address 40000000
=>  Transfer rate: 881664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mimfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 648/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:642  W:0    | mipstx39/jmr3904: mimfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.503108 mimfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fsscandir01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11150 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011150
=>  Loading section .data, size 0x370 lma 40015180
=>  Start address 40000000
=>  Transfer rate: 567808 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mimfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 649/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:643  W:0    | mipstx39/jmr3904: mimfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.526190 mimfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fssymlink.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d90 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010d90
=>  Loading section .data, size 0x370 lma 40014dc0
=>  Start address 40000000
=>  Transfer rate: 560128 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mimfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 650/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:645  W:0    | mipstx39/jmr3904: mimfs_fstime.exe
Result: invalid   
Time: 0:00:00.534761 mimfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fstime.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mimfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11810 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011810
=>  Loading section .data, size 0x380 lma 40015840
=>  Start address 40000000
=>  Transfer rate: 581760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mimfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 651/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:646  W:0    | mipstx39/jmr3904: mrfs_fserror.exe
Result: invalid   
Time: 0:00:00.521131 mrfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fserror.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28310 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40028310
=>  Loading section .data, size 0x4f0 lma 4002c640
=>  Start address 40000000
=>  Transfer rate: 1328128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 652/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:646  W:0    | mipstx39/jmr3904: mrfs_fsfpathconf.exe
Result: invalid   
Time: 0:00:00.508578 mrfs_fsfpathconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsfpathconf.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsfpathconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21030 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40021030
=>  Loading section .data, size 0x380 lma 40025340
=>  Start address 40000000
=>  Transfer rate: 1089920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsfpathconf.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 653/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:646  W:0    | mipstx39/jmr3904: mrfs_fslink.exe
Result: invalid   
Time: 0:00:00.529515 mrfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fslink.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21240 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40021240
=>  Loading section .data, size 0x380 lma 40025540
=>  Start address 40000000
=>  Transfer rate: 1094144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 654/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:646  W:0    | mipstx39/jmr3904: mrfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.504743 mrfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fspatheval.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21c10 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40021c10
=>  Loading section .data, size 0x380 lma 40025f40
=>  Start address 40000000
=>  Transfer rate: 1114240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 655/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:646  W:0    | mipstx39/jmr3904: mrfs_fspermission.exe
Result: invalid   
Time: 0:00:00.511133 mrfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fspermission.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28280 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40028280
=>  Loading section .data, size 0x4f0 lma 4002c580
=>  Start address 40000000
=>  Transfer rate: 1326976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 656/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:651  W:0    | mipstx39/jmr3904: mrfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.512691 mrfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsrdwr.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23fc0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40023fc0
=>  Loading section .data, size 0x380 lma 400282c0
=>  Start address 40000000
=>  Transfer rate: 1187328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 657/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:651  W:0    | mipstx39/jmr3904: mrfs_fsrename.exe
Result: invalid   
Time: 0:00:00.502323 mrfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsrename.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2b300 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4002b300
=>  Loading section .data, size 0x4f0 lma 4002f600
=>  Start address 40000000
=>  Transfer rate: 1426304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 658/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:654  W:0    | mipstx39/jmr3904: mrfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.524170 mrfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsscandir01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21dd0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40021dd0
=>  Loading section .data, size 0x380 lma 40026100
=>  Start address 40000000
=>  Transfer rate: 1117824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 659/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:654  W:0    | mipstx39/jmr3904: mrfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.506631 mrfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fssymlink.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21790 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40021790
=>  Loading section .data, size 0x380 lma 40025ac0
=>  Start address 40000000
=>  Transfer rate: 1105024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 660/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:654  W:0    | mipstx39/jmr3904: mrfs_fstime.exe
Result: invalid   
Time: 0:00:00.524831 mrfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fstime.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/mrfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22250 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40022250
=>  Loading section .data, size 0x390 lma 40026580
=>  Start address 40000000
=>  Transfer rate: 1127168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/mrfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 661/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:654  W:0    | mipstx39/jmr3904: tftpfs.exe
Result: invalid   
Time: 0:00:00.505997 tftpfs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/fstests/tftpfs.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/fstests/tftpfs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x324e0 lma 40000000
=>  Loading section .rtemsroset, size 0x1f0 lma 400324e0
=>  Loading section .data, size 0xab0 lma 40034cc0
=>  Start address 40000000
=>  Transfer rate: 1674240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/fstests/tftpfs.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 662/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:654  W:0    | mipstx39/jmr3904: block01.exe
Result: invalid   
Time: 0:00:00.513509 block01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13780 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40013780
=>  Loading section .data, size 0x310 lma 400160c0
=>  Start address 40000000
=>  Transfer rate: 645120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 663/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:654  W:0    | mipstx39/jmr3904: block02.exe
Result: invalid   
Time: 0:00:00.507199 block02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12880 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40012880
=>  Loading section .data, size 0x300 lma 40015780
=>  Start address 40000000
=>  Transfer rate: 614272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 664/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:660  W:0    | mipstx39/jmr3904: block03.exe
Result: invalid   
Time: 0:00:00.252280 block03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12850 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40012850
=>  Loading section .data, size 0x300 lma 40015740
=>  Start address 40000000
=>  Transfer rate: 613888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 665/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:661  W:0    | mipstx39/jmr3904: block04.exe
Result: invalid   
Time: 0:00:00.791233 block04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12740 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40012740
=>  Loading section .data, size 0x300 lma 40015640
=>  Start address 40000000
=>  Transfer rate: 611712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 666/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:661  W:0    | mipstx39/jmr3904: block05.exe
Result: invalid   
Time: 0:00:00.517601 block05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13a40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013a40
=>  Loading section .data, size 0x330 lma 40016c00
=>  Start address 40000000
=>  Transfer rate: 651136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 667/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:662  W:0    | mipstx39/jmr3904: block06.exe
Result: invalid   
Time: 0:00:00.511629 block06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c9e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001c9e0
=>  Loading section .data, size 0x4d0 lma 4001fc40
=>  Start address 40000000
=>  Transfer rate: 948608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 668/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:661  W:0    | mipstx39/jmr3904: block07.exe
Result: invalid   
Time: 0:00:00.517103 block07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12be0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40012be0
=>  Loading section .data, size 0x300 lma 40015dc0
=>  Start address 40000000
=>  Transfer rate: 621184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 669/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:662  W:0    | mipstx39/jmr3904: block08.exe
Result: invalid   
Time: 0:00:00.508264 block08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a3a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001a3a0
=>  Loading section .data, size 0x3d0 lma 400224c0
=>  Start address 40000000
=>  Transfer rate: 868224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 670/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:662  W:0    | mipstx39/jmr3904: block09.exe
Result: invalid   
Time: 0:00:00.555007 block09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block09.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13350 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013350
=>  Loading section .data, size 0x330 lma 40015c80
=>  Start address 40000000
=>  Transfer rate: 636928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block09.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 671/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:662  W:0    | mipstx39/jmr3904: block10.exe
Result: invalid   
Time: 0:00:00.506480 block10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block10.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13dc0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013dc0
=>  Loading section .data, size 0x330 lma 40016cc0
=>  Start address 40000000
=>  Transfer rate: 658304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block10.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 672/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:663  W:0    | mipstx39/jmr3904: block11.exe
Result: invalid   
Time: 0:00:00.263018 block11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block11.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x143b0 lma 40000000
=>  Loading section .tdata, size 0xe lma 400143b0
=>  Loading section .rtemsroset, size 0x80 lma 400143c0
=>  Loading section .data, size 0x350 lma 40016d00
=>  Start address 40000000
=>  Transfer rate: 670832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block11.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 673/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:667  W:0    | mipstx39/jmr3904: block12.exe
Result: invalid   
Time: 0:00:00.565043 block12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block12.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e20 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012e20
=>  Loading section .data, size 0x370 lma 40015740
=>  Start address 40000000
=>  Transfer rate: 626816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block12.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 674/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:667  W:0    | mipstx39/jmr3904: block13.exe
Result: invalid   
Time: 0:00:00.522015 block13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block13.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13480 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013480
=>  Loading section .data, size 0x330 lma 40016080
=>  Start address 40000000
=>  Transfer rate: 639360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block13.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 675/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:667  W:0    | mipstx39/jmr3904: block14.exe
Result: invalid   
Time: 0:00:00.286642 block14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block14.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013b40
=>  Loading section .data, size 0x330 lma 40016740
=>  Start address 40000000
=>  Transfer rate: 653184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block14.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 676/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:670  W:0    | mipstx39/jmr3904: block15.exe
Result: invalid   
Time: 0:00:00.518588 block15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block15.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13000 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013000
=>  Loading section .data, size 0x330 lma 40015940
=>  Start address 40000000
=>  Transfer rate: 630144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block15.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 677/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:670  W:0    | mipstx39/jmr3904: block16.exe
Result: invalid   
Time: 0:00:00.533342 block16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block16.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13190 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013190
=>  Loading section .data, size 0x330 lma 40015ac0
=>  Start address 40000000
=>  Transfer rate: 633344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block16.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 678/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:670  W:0    | mipstx39/jmr3904: block17.exe
Result: invalid   
Time: 0:00:00.269575 block17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/block17.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/block17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12770 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012770
=>  Loading section .data, size 0x330 lma 40015380
=>  Start address 40000000
=>  Transfer rate: 612608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/block17.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 679/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:671  W:0    | mipstx39/jmr3904: bspcmdline01.exe
Result: invalid   
Time: 0:00:00.263100 bspcmdline01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/bspcmdline01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/bspcmdline01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf590 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f590
=>  Loading section .data, size 0x2e0 lma 40011bc0
=>  Start address 40000000
=>  Transfer rate: 509696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/bspcmdline01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 680/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:672  W:0    | mipstx39/jmr3904: capture01.exe
Result: invalid   
Time: 0:00:00.275739 capture01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/capture01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/capture01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bc30 lma 40000000
=>  Loading section .tdata, size 0xc lma 4001bc30
=>  Loading section .rtemsroset, size 0x80 lma 4001bc40
=>  Loading section .data, size 0x510 lma 4001f040
=>  Start address 40000000
=>  Transfer rate: 921184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/capture01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 681/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:677  W:0    | mipstx39/jmr3904: complex.exe
Result: invalid   
Time: 0:00:00.514100 complex.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/complex.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/complex.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22200 lma 40000000
=>  Loading section .tdata, size 0xc lma 40022200
=>  Loading section .rtemsroset, size 0x70 lma 40022210
=>  Loading section .data, size 0x490 lma 40024840
=>  Start address 40000000
=>  Transfer rate: 1128544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/complex.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 682/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:674  W:0    | mipstx39/jmr3904: cpuuse.exe
Result: invalid   
Time: 0:00:00.509085 cpuuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/cpuuse.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/cpuuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x117d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400117d0
=>  Loading section .data, size 0x500 lma 40014740
=>  Start address 40000000
=>  Transfer rate: 584320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/cpuuse.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 683/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:674  W:0    | mipstx39/jmr3904: crypt01.exe
Result: invalid   
Time: 0:00:00.531452 crypt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/crypt01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/crypt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1cd60 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4001cd60
=>  Loading section .data, size 0x4c0 lma 4001f3c0
=>  Start address 40000000
=>  Transfer rate: 955520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/crypt01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 684/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:679  W:0    | mipstx39/jmr3904: defaultconfig01.exe
Result: invalid   
Time: 0:00:00.510668 defaultconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/defaultconfig01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/defaultconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ec0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012ec0
=>  Loading section .data, size 0x4a0 lma 40017000
=>  Start address 40000000
=>  Transfer rate: 630528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/defaultconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 685/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:679  W:0    | mipstx39/jmr3904: devfs01.exe
Result: invalid   
Time: 0:00:00.518584 devfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/devfs01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/devfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xc0f0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000c0f0
=>  Loading section .data, size 0x2e0 lma 4000e740
=>  Start address 40000000
=>  Transfer rate: 401920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/devfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 686/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:679  W:0    | mipstx39/jmr3904: devfs04.exe
Result: invalid   
Time: 0:00:00.275394 devfs04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/devfs04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/devfs04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xd000 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000d000
=>  Loading section .data, size 0x2e0 lma 4000f640
=>  Start address 40000000
=>  Transfer rate: 432768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/devfs04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 687/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:679  W:0    | mipstx39/jmr3904: deviceio01.exe
Result: invalid   
Time: 0:00:00.517813 deviceio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/deviceio01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/deviceio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf450 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f450
=>  Loading section .data, size 0x320 lma 40011ac0
=>  Start address 40000000
=>  Transfer rate: 507776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/deviceio01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 688/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:679  W:0    | mipstx39/jmr3904: devnullfatal01.exe
Result: invalid   
Time: 0:00:00.268129 devnullfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/devnullfatal01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/devnullfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf610 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f610
=>  Loading section .data, size 0x310 lma 40011c80
=>  Start address 40000000
=>  Transfer rate: 511232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/devnullfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 689/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:682  W:0    | mipstx39/jmr3904: dl01.exe
Result: invalid   
Time: 0:00:00.502173 dl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2ed70 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4002ed70
=>  Loading section .data, size 0x4e0 lma 40031400
=>  Start address 40000000
=>  Transfer rate: 1545856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 690/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:683  W:0    | mipstx39/jmr3904: dl02.exe
Result: invalid   
Time: 0:00:00.508477 dl02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2ede0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4002ede0
=>  Loading section .data, size 0x4e0 lma 40031480
=>  Start address 40000000
=>  Transfer rate: 1546752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 691/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:683  W:0    | mipstx39/jmr3904: dl03.exe
Result: invalid   
Time: 0:00:00.504022 dl03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19ff0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40019ff0
=>  Loading section .data, size 0x520 lma 4001c640
=>  Start address 40000000
=>  Transfer rate: 863360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 692/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:687  W:0    | mipstx39/jmr3904: dl04.exe
Result: invalid   
Time: 0:00:00.558261 dl04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2e790 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4002e790
=>  Loading section .data, size 0x4d0 lma 40030e40
=>  Start address 40000000
=>  Transfer rate: 1533696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 693/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:686  W:0    | mipstx39/jmr3904: dl05.exe
Result: invalid   
Time: 0:00:00.524702 dl05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x470e0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400470e0
=>  Loading section .rtemsroset, size 0x80 lma 400470f0
=>  Loading section .data, size 0x640 lma 400497c0
=>  Start address 40000000
=>  Transfer rate: 2342240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 694/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:686  W:0    | mipstx39/jmr3904: dl06.exe
Result: invalid   
Time: 0:00:00.521821 dl06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x31530 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40031530
=>  Loading section .data, size 0x4e0 lma 40033bc0
=>  Start address 40000000
=>  Transfer rate: 1627264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 695/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:687  W:0    | mipstx39/jmr3904: dl07.exe
Result: invalid   
Time: 0:00:00.520124 dl07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x34d10 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40034d10
=>  Loading section .data, size 0x4d0 lma 400373c0
=>  Start address 40000000
=>  Transfer rate: 1741568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 696/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:689  W:0    | mipstx39/jmr3904: dl08.exe
Result: invalid   
Time: 0:00:00.252762 dl08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x347a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400347a0
=>  Loading section .data, size 0x4d0 lma 40036e40
=>  Start address 40000000
=>  Transfer rate: 1730432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 697/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:690  W:0    | mipstx39/jmr3904: dl09.exe
Result: invalid   
Time: 0:00:00.503653 dl09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl09.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x32460 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40032460
=>  Loading section .data, size 0x4d0 lma 40034b00
=>  Start address 40000000
=>  Transfer rate: 1658240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl09.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 698/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:690  W:0    | mipstx39/jmr3904: dl10.exe
Result: invalid   
Time: 0:00:00.529701 dl10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dl10.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dl10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x8d220 lma 40000000
=>  Loading section .tdata, size 0x14 lma 4008d220
=>  Loading section .rtemsroset, size 0x88 lma 4008d238
=>  Loading section .data, size 0x1700 lma 40093880
=>  Start address 40000000
=>  Transfer rate: 4672992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dl10.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 699/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:690  W:0    | mipstx39/jmr3904: dumpbuf01.exe
Result: invalid   
Time: 0:00:00.513285 dumpbuf01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/dumpbuf01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/dumpbuf01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf0a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f0a0
=>  Loading section .data, size 0x330 lma 40011700
=>  Start address 40000000
=>  Transfer rate: 500352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/dumpbuf01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 700/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:694  W:0    | mipstx39/jmr3904: exit01.exe
Result: invalid   
Time: 0:00:00.505143 exit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/exit01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/exit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf200 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f200
=>  Loading section .data, size 0x310 lma 40011b40
=>  Start address 40000000
=>  Transfer rate: 502912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/exit01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 701/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:694  W:0    | mipstx39/jmr3904: exit02.exe
Result: invalid   
Time: 0:00:00.540525 exit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/exit02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/exit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef10 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000ef10
=>  Loading section .data, size 0x310 lma 40011840
=>  Start address 40000000
=>  Transfer rate: 496896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/exit02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 702/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:694  W:0    | mipstx39/jmr3904: exit03.exe
Result: invalid   
Time: 0:00:00.754680 exit03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/exit03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/exit03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9efd0 lma 40000000
=>  Loading section .tdata, size 0xc lma 4009efd0
=>  Loading section .rtemsroset, size 0x80 lma 4009efe0
=>  Loading section .data, size 0x22e0 lma 400a1900
=>  Start address 40000000
=>  Transfer rate: 5282272 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/exit03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 703/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:696  W:0    | mipstx39/jmr3904: flashdisk01.exe
Result: invalid   
Time: 0:00:00.272422 flashdisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/flashdisk01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/flashdisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x30000 lma 40000000
=>  Loading section .tdata, size 0x1a lma 40030000
=>  Loading section .rtemsroset, size 0x80 lma 40030020
=>  Loading section .data, size 0x4c0 lma 40032c40
=>  Start address 40000000
=>  Transfer rate: 1583824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/flashdisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 704/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:696  W:0    | mipstx39/jmr3904: getentropy01.exe
Result: invalid   
Time: 0:00:00.504608 getentropy01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/getentropy01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/getentropy01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe560 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000e560
=>  Loading section .data, size 0x300 lma 40010bc0
=>  Start address 40000000
=>  Transfer rate: 476928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/getentropy01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 705/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:698  W:0    | mipstx39/jmr3904: heapwalk.exe
Result: invalid   
Time: 0:00:00.538294 heapwalk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/heapwalk.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/heapwalk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400105f0
=>  Loading section .data, size 0x310 lma 40013ac0
=>  Start address 40000000
=>  Transfer rate: 543744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/heapwalk.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 706/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:698  W:0    | mipstx39/jmr3904: i2c01.exe
Result: invalid   
Time: 0:00:00.507486 i2c01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/i2c01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/i2c01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x139d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400139d0
=>  Loading section .data, size 0x340 lma 40016300
=>  Start address 40000000
=>  Transfer rate: 650368 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/i2c01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 707/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:698  W:0    | mipstx39/jmr3904: irqs01.exe
Result: invalid   
Time: 0:00:00.577157 irqs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/irqs01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/irqs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14650 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40014650
=>  Loading section .data, size 0x380 lma 40016f80
=>  Start address 40000000
=>  Transfer rate: 676608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/irqs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 708/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:701  W:0    | mipstx39/jmr3904: libfdt01.exe
Result: invalid   
Time: 0:00:00.531818 libfdt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/libfdt01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/libfdt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10af0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010af0
=>  Loading section .data, size 0x310 lma 40013140
=>  Start address 40000000
=>  Transfer rate: 553984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/libfdt01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 709/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:701  W:0    | mipstx39/jmr3904: malloc02.exe
Result: invalid   
Time: 0:00:00.254392 malloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/malloc02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/malloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf760 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f760
=>  Loading section .data, size 0x340 lma 40011e00
=>  Start address 40000000
=>  Transfer rate: 514304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/malloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 710/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:701  W:0    | mipstx39/jmr3904: malloc03.exe
Result: invalid   
Time: 0:00:00.541420 malloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/malloc03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/malloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe090 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e090
=>  Loading section .data, size 0x2e0 lma 400106c0
=>  Start address 40000000
=>  Transfer rate: 466688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/malloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 711/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:705  W:0    | mipstx39/jmr3904: malloc04.exe
Result: invalid   
Time: 0:00:00.523870 malloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/malloc04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/malloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf790 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f790
=>  Loading section .data, size 0x310 lma 40011e00
=>  Start address 40000000
=>  Transfer rate: 514304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/malloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 712/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:705  W:0    | mipstx39/jmr3904: malloctest.exe
Result: invalid   
Time: 0:00:00.508752 malloctest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/malloctest.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/malloctest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x174e0 lma 40000000
=>  Loading section .tdata, size 0x8 lma 400174e0
=>  Loading section .rtemsroset, size 0x78 lma 400174e8
=>  Loading section .data, size 0x4e0 lma 4001a980
=>  Start address 40000000
=>  Transfer rate: 774656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/malloctest.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 713/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:705  W:0    | mipstx39/jmr3904: math.exe
Result: invalid   
Time: 0:00:00.508088 math.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/math.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/math.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23680 lma 40000000
=>  Loading section .tdata, size 0xc lma 40023680
=>  Loading section .rtemsroset, size 0x70 lma 40023690
=>  Loading section .data, size 0x4a0 lma 40025cc0
=>  Start address 40000000
=>  Transfer rate: 1170656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/math.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 714/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:707  W:0    | mipstx39/jmr3904: mathf.exe
Result: invalid   
Time: 0:00:00.573504 mathf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/mathf.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/mathf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21ed0 lma 40000000
=>  Loading section .tdata, size 0xc lma 40021ed0
=>  Loading section .rtemsroset, size 0x70 lma 40021ee0
=>  Loading section .data, size 0x490 lma 40024540
=>  Start address 40000000
=>  Transfer rate: 1122016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/mathf.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 715/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:707  W:0    | mipstx39/jmr3904: mathl.exe
Result: invalid   
Time: 0:00:00.510956 mathl.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/mathl.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/mathl.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15a30 lma 40000000
=>  Loading section .tdata, size 0xc lma 40015a30
=>  Loading section .rtemsroset, size 0x70 lma 40015a40
=>  Loading section .data, size 0x480 lma 40018080
=>  Start address 40000000
=>  Transfer rate: 719200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/mathl.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 716/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:707  W:0    | mipstx39/jmr3904: md501.exe
Result: invalid   
Time: 0:00:00.252979 md501.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/md501.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/md501.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10160 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010160
=>  Loading section .data, size 0x350 lma 400127c0
=>  Start address 40000000
=>  Transfer rate: 534912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/md501.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 717/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:708  W:0    | mipstx39/jmr3904: monitor.exe
Result: invalid   
Time: 0:00:00.297038 monitor.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/monitor.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/monitor.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26000 lma 40000000
=>  Loading section .tdata, size 0xc lma 40026000
=>  Loading section .rtemsroset, size 0x80 lma 40026010
=>  Loading section .data, size 0x6c0 lma 40029e80
=>  Start address 40000000
=>  Transfer rate: 1260128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/monitor.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 718/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:714  W:0    | mipstx39/jmr3904: monitor02.exe
Result: invalid   
Time: 0:00:00.510119 monitor02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/monitor02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/monitor02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e810 lma 40000000
=>  Loading section .tdata, size 0xc lma 4001e810
=>  Loading section .rtemsroset, size 0x90 lma 4001e820
=>  Loading section .data, size 0x740 lma 40022980
=>  Start address 40000000
=>  Transfer rate: 1015648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/monitor02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 719/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:714  W:0    | mipstx39/jmr3904: mouse01.exe
Result: invalid   
Time: 0:00:00.551983 mouse01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/mouse01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/mouse01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a8f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001a8f0
=>  Loading section .data, size 0x540 lma 4001d040
=>  Start address 40000000
=>  Transfer rate: 882048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/mouse01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 720/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:714  W:0    | mipstx39/jmr3904: newlib01.exe
Result: invalid   
Time: 0:00:00.514871 newlib01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/newlib01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/newlib01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13640 lma 40000000
=>  Loading section .tdata, size 0x22 lma 40013640
=>  Loading section .rtemsroset, size 0x78 lma 40013668
=>  Loading section .data, size 0x350 lma 40015f80
=>  Start address 40000000
=>  Transfer rate: 643408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/newlib01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 721/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:716  W:0    | mipstx39/jmr3904: ofw01.exe
Result: invalid   
Time: 0:00:00.524984 ofw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/ofw01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/ofw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011f40
=>  Loading section .data, size 0x310 lma 40014580
=>  Start address 40000000
=>  Transfer rate: 595584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/ofw01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 722/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:715  W:0    | mipstx39/jmr3904: putenvtest.exe
Result: invalid   
Time: 0:00:00.285439 putenvtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/putenvtest.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/putenvtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf710 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f710
=>  Loading section .data, size 0x310 lma 40011d80
=>  Start address 40000000
=>  Transfer rate: 513280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/putenvtest.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 723/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:716  W:0    | mipstx39/jmr3904: pwdgrp01.exe
Result: invalid   
Time: 0:00:00.277438 pwdgrp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/pwdgrp01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/pwdgrp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12660 lma 40000000
=>  Loading section .tdata, size 0xc lma 40012660
=>  Loading section .rtemsroset, size 0x70 lma 40012670
=>  Loading section .data, size 0x380 lma 40014cc0
=>  Start address 40000000
=>  Transfer rate: 611040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/pwdgrp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 724/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:716  W:0    | mipstx39/jmr3904: pwdgrp02.exe
Result: invalid   
Time: 0:00:00.254266 pwdgrp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/pwdgrp02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/pwdgrp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114a0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400114a0
=>  Loading section .rtemsroset, size 0x70 lma 400114b0
=>  Loading section .data, size 0x310 lma 40013b00
=>  Start address 40000000
=>  Transfer rate: 573792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/pwdgrp02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 725/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:716  W:0    | mipstx39/jmr3904: rbheap01.exe
Result: invalid   
Time: 0:00:00.252626 rbheap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/rbheap01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/rbheap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10060 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010060
=>  Loading section .data, size 0x310 lma 400126c0
=>  Start address 40000000
=>  Transfer rate: 532352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/rbheap01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 726/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:723  W:0    | mipstx39/jmr3904: rcxx01.exe
Result: invalid   
Time: 0:00:00.757267 rcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/rcxx01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/rcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xa3950 lma 40000000
=>  Loading section .tdata, size 0xc lma 400a3950
=>  Loading section .rtemsroset, size 0x80 lma 400a3960
=>  Loading section .data, size 0x2550 lma 400a6e00
=>  Start address 40000000
=>  Transfer rate: 5437792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/rcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 727/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:723  W:0    | mipstx39/jmr3904: record01.exe
Result: invalid   
Time: 0:00:00.527418 record01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/record01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/record01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102c0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400102c0
=>  Loading section .data, size 0x310 lma 40012900
=>  Start address 40000000
=>  Transfer rate: 537216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/record01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 728/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:723  W:0    | mipstx39/jmr3904: record02.exe
Result: invalid   
Time: 0:00:00.503198 record02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/record02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/record02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1f2c0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001f2c0
=>  Loading section .data, size 0x340 lma 40021900
=>  Start address 40000000
=>  Transfer rate: 1029120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/record02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 729/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:723  W:0    | mipstx39/jmr3904: rtmonuse.exe
Result: invalid   
Time: 0:00:00.509431 rtmonuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/rtmonuse.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/rtmonuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400114a0
=>  Loading section .data, size 0x380 lma 40015040
=>  Start address 40000000
=>  Transfer rate: 574720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/rtmonuse.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 730/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:724  W:0    | mipstx39/jmr3904: sha.exe
Result: invalid   
Time: 0:00:00.508538 sha.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/sha.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/sha.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14290 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40014290
=>  Loading section .data, size 0x2e0 lma 400168c0
=>  Start address 40000000
=>  Transfer rate: 667392 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/sha.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 731/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:724  W:0    | mipstx39/jmr3904: shell01.exe
Result: invalid   
Time: 0:00:00.550536 shell01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/shell01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/shell01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2fe90 lma 40000000
=>  Loading section .tdata, size 0xc lma 4002fe90
=>  Loading section .rtemsroset, size 0x80 lma 4002fea0
=>  Loading section .data, size 0x820 lma 40032b00
=>  Start address 40000000
=>  Transfer rate: 1587680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/shell01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 732/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:724  W:0    | mipstx39/jmr3904: sparsedisk01.exe
Result: invalid   
Time: 0:00:00.546913 sparsedisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/sparsedisk01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/sparsedisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14750 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014750
=>  Loading section .data, size 0x330 lma 40017080
=>  Start address 40000000
=>  Transfer rate: 677888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/sparsedisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 733/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:724  W:0    | mipstx39/jmr3904: spi01.exe
Result: invalid   
Time: 0:00:00.280689 spi01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/spi01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/spi01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10540 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010540
=>  Loading section .data, size 0x350 lma 40012b80
=>  Start address 40000000
=>  Transfer rate: 542848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/spi01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 734/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:727  W:0    | mipstx39/jmr3904: stackchk.exe
Result: invalid   
Time: 0:00:00.256449 stackchk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/stackchk.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/stackchk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10e40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010e40
=>  Loading section .data, size 0x4b0 lma 40013d40
=>  Start address 40000000
=>  Transfer rate: 564096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/stackchk.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 735/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:728  W:0    | mipstx39/jmr3904: stackchk01.exe
Result: invalid   
Time: 0:00:00.269788 stackchk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/stackchk01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/stackchk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe460 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e460
=>  Loading section .data, size 0x2e0 lma 40010ac0
=>  Start address 40000000
=>  Transfer rate: 474496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/stackchk01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 736/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:728  W:0    | mipstx39/jmr3904: stackchk02.exe
Result: invalid   
Time: 0:00:00.287871 stackchk02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/stackchk02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/stackchk02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe2c0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e2c0
=>  Loading section .data, size 0x2e0 lma 40010900
=>  Start address 40000000
=>  Transfer rate: 471168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/stackchk02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 737/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:728  W:0    | mipstx39/jmr3904: stringto01.exe
Result: invalid   
Time: 0:00:00.256350 stringto01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/stringto01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/stringto01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x168a0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 400168a0
=>  Loading section .data, size 0x450 lma 40018f00
=>  Start address 40000000
=>  Transfer rate: 748288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/stringto01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 738/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:734  W:0    | mipstx39/jmr3904: tar01.exe
Result: invalid   
Time: 0:00:00.514856 tar01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/tar01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/tar01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b7c0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4001b7c0
=>  Loading section .data, size 0x2e0 lma 4001de00
=>  Start address 40000000
=>  Transfer rate: 907392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/tar01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 739/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:736  W:0    | mipstx39/jmr3904: tar02.exe
Result: invalid   
Time: 0:00:00.510926 tar02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/tar02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/tar02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13860 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40013860
=>  Loading section .data, size 0x2e0 lma 40015ec0
=>  Start address 40000000
=>  Transfer rate: 646528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/tar02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 740/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:736  W:0    | mipstx39/jmr3904: tar03.exe
Result: invalid   
Time: 0:00:00.505183 tar03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/tar03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/tar03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ba0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010ba0
=>  Loading section .data, size 0x310 lma 40013200
=>  Start address 40000000
=>  Transfer rate: 555392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/tar03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 741/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:736  W:0    | mipstx39/jmr3904: termios.exe
Result: invalid   
Time: 0:00:00.560882 termios.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23700 lma 40000000
=>  Loading section .tdata, size 0xc lma 40023700
=>  Loading section .rtemsroset, size 0x80 lma 40023710
=>  Loading section .data, size 0x490 lma 40025d80
=>  Start address 40000000
=>  Transfer rate: 1171680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 742/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:736  W:0    | mipstx39/jmr3904: termios01.exe
Result: invalid   
Time: 0:00:00.506990 termios01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x174f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400174f0
=>  Loading section .data, size 0x3c0 lma 40019b40
=>  Start address 40000000
=>  Transfer rate: 772480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 743/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:736  W:0    | mipstx39/jmr3904: termios02.exe
Result: invalid   
Time: 0:00:00.519408 termios02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12040 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40012040
=>  Loading section .data, size 0x2e0 lma 40014680
=>  Start address 40000000
=>  Transfer rate: 597120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 744/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:736  W:0    | mipstx39/jmr3904: termios03.exe
Result: invalid   
Time: 0:00:00.551585 termios03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x133a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400133a0
=>  Loading section .data, size 0x350 lma 40015a00
=>  Start address 40000000
=>  Transfer rate: 637824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 745/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:736  W:0    | mipstx39/jmr3904: termios04.exe
Result: invalid   
Time: 0:00:00.513606 termios04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13540 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013540
=>  Loading section .data, size 0x380 lma 40015c40
=>  Start address 40000000
=>  Transfer rate: 641536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 746/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:743  W:0    | mipstx39/jmr3904: termios05.exe
Result: invalid   
Time: 0:00:01.009374 termios05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x138a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400138a0
=>  Loading section .data, size 0x380 lma 40016840
=>  Start address 40000000
=>  Transfer rate: 648448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 747/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:741  W:0    | mipstx39/jmr3904: termios06.exe
Result: invalid   
Time: 0:00:00.792066 termios06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13780 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013780
=>  Loading section .data, size 0x360 lma 40015dc0
=>  Start address 40000000
=>  Transfer rate: 645888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 748/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:740  W:0    | mipstx39/jmr3904: termios07.exe
Result: invalid   
Time: 0:00:00.773896 termios07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13700 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013700
=>  Loading section .data, size 0x380 lma 40015e00
=>  Start address 40000000
=>  Transfer rate: 645120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 749/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:741  W:0    | mipstx39/jmr3904: termios08.exe
Result: invalid   
Time: 0:00:00.793893 termios08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13020 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013020
=>  Loading section .data, size 0x350 lma 40015680
=>  Start address 40000000
=>  Transfer rate: 630656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 750/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:742  W:0    | mipstx39/jmr3904: termios09.exe
Result: invalid   
Time: 0:00:00.518780 termios09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios09.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17500 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40017500
=>  Loading section .data, size 0x500 lma 40019e40
=>  Start address 40000000
=>  Transfer rate: 775168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios09.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 751/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:744  W:0    | mipstx39/jmr3904: termios10.exe
Result: invalid   
Time: 0:00:00.786019 termios10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios10.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ce0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014ce0
=>  Loading section .data, size 0x3d0 lma 40017340
=>  Start address 40000000
=>  Transfer rate: 690560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios10.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 752/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:744  W:0    | mipstx39/jmr3904: termios11.exe
Result: invalid   
Time: 0:00:00.799133 termios11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/termios11.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/termios11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15230 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40015230
=>  Loading section .data, size 0x400 lma 40017940
=>  Start address 40000000
=>  Transfer rate: 701952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/termios11.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 753/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:744  W:0    | mipstx39/jmr3904: top.exe
Result: invalid   
Time: 0:00:00.791023 top.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/top.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/top.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c4a0 lma 40000000
=>  Loading section .tdata, size 0xc lma 4001c4a0
=>  Loading section .rtemsroset, size 0x80 lma 4001c4b0
=>  Loading section .data, size 0x4a0 lma 40024540
=>  Start address 40000000
=>  Transfer rate: 937568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/top.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 754/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:745  W:0    | mipstx39/jmr3904: ttest01.exe
Result: invalid   
Time: 0:00:00.503642 ttest01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/ttest01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/ttest01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x3a9e0 lma 40000000
=>  Loading section .rtemsroset, size 0xb60 lma 4003a9e0
=>  Loading section .data, size 0x1a30 lma 4003e100
=>  Start address 40000000
=>  Transfer rate: 1997696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/ttest01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 755/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:748  W:0    | mipstx39/jmr3904: ttest02.exe
Result: invalid   
Time: 0:00:00.808172 ttest02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/ttest02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/ttest02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14fb0 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40014fb0
=>  Loading section .data, size 0x480 lma 40017600
=>  Start address 40000000
=>  Transfer rate: 697856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/ttest02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 756/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:748  W:0    | mipstx39/jmr3904: tztest.exe
Result: invalid   
Time: 0:00:00.503516 tztest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/tztest.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/tztest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14a20 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014a20
=>  Loading section .data, size 0x500 lma 40017080
=>  Start address 40000000
=>  Transfer rate: 687360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/tztest.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 757/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:752  W:0    | mipstx39/jmr3904: uid01.exe
Result: invalid   
Time: 0:00:00.789155 uid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/uid01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/uid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a660 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001a660
=>  Loading section .data, size 0x540 lma 4001cd80
=>  Start address 40000000
=>  Transfer rate: 876800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/uid01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 758/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:752  W:0    | mipstx39/jmr3904: utf8proc01.exe
Result: invalid   
Time: 0:00:00.764813 utf8proc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/libtests/utf8proc01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/libtests/utf8proc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x7bd00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4007bd00
=>  Loading section .data, size 0x310 lma 4007e340
=>  Start address 40000000
=>  Transfer rate: 4064384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/libtests/utf8proc01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 759/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:752  W:0    | mipstx39/jmr3904: psx01.exe
Result: invalid   
Time: 0:00:00.765289 psx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15d70 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40015d70
=>  Loading section .data, size 0x480 lma 400186c0
=>  Start address 40000000
=>  Transfer rate: 725888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 760/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:752  W:0    | mipstx39/jmr3904: psx02.exe
Result: invalid   
Time: 0:00:00.533271 psx02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x186a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400186a0
=>  Loading section .data, size 0x510 lma 4001afc0
=>  Start address 40000000
=>  Transfer rate: 811392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 761/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:752  W:0    | mipstx39/jmr3904: psx03.exe
Result: invalid   
Time: 0:00:00.754322 psx03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18d40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40018d40
=>  Loading section .data, size 0x510 lma 4001b940
=>  Start address 40000000
=>  Transfer rate: 824960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 762/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:753  W:0    | mipstx39/jmr3904: psx04.exe
Result: invalid   
Time: 0:00:00.508011 psx04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19890 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40019890
=>  Loading section .data, size 0x540 lma 4001c780
=>  Start address 40000000
=>  Transfer rate: 848512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 763/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:755  W:0    | mipstx39/jmr3904: psx05.exe
Result: invalid   
Time: 0:00:00.515591 psx05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b230 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001b230
=>  Loading section .data, size 0x510 lma 4001e140
=>  Start address 40000000
=>  Transfer rate: 900608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 764/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:755  W:0    | mipstx39/jmr3904: psx06.exe
Result: invalid   
Time: 0:00:00.504099 psx06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15fd0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40015fd0
=>  Loading section .data, size 0x580 lma 40018c00
=>  Start address 40000000
=>  Transfer rate: 732800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 765/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:761  W:0    | mipstx39/jmr3904: psx07.exe
Result: invalid   
Time: 0:00:00.253665 psx07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1cf80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001cf80
=>  Loading section .data, size 0x510 lma 4001fb80
=>  Start address 40000000
=>  Transfer rate: 960640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 766/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:761  W:0    | mipstx39/jmr3904: psx08.exe
Result: invalid   
Time: 0:00:00.529685 psx08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x164c0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400164c0
=>  Loading section .data, size 0x510 lma 400193c0
=>  Start address 40000000
=>  Transfer rate: 742016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 767/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:761  W:0    | mipstx39/jmr3904: psx09.exe
Result: invalid   
Time: 0:00:00.525963 psx09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx09.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e860 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001e860
=>  Loading section .data, size 0x500 lma 40021180
=>  Start address 40000000
=>  Transfer rate: 1011456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx09.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 768/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:761  W:0    | mipstx39/jmr3904: psx10.exe
Result: invalid   
Time: 0:00:00.519019 psx10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx10.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12b20 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012b20
=>  Loading section .data, size 0x320 lma 40015a00
=>  Start address 40000000
=>  Transfer rate: 620032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx10.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 769/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:761  W:0    | mipstx39/jmr3904: psx11.exe
Result: invalid   
Time: 0:00:00.510679 psx11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx11.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15790 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40015790
=>  Loading section .data, size 0x500 lma 40018680
=>  Start address 40000000
=>  Transfer rate: 714880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx11.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 770/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:761  W:0    | mipstx39/jmr3904: psx12.exe
Result: invalid   
Time: 0:00:00.510624 psx12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx12.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15e00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40015e00
=>  Loading section .data, size 0x510 lma 40018740
=>  Start address 40000000
=>  Transfer rate: 728192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx12.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 771/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:764  W:0    | mipstx39/jmr3904: psx13.exe
Result: invalid   
Time: 0:00:00.252919 psx13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx13.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15c10 lma 40000000
=>  Loading section .tdata, size 0xc lma 40015c10
=>  Loading section .rtemsroset, size 0x80 lma 40015c20
=>  Loading section .data, size 0x310 lma 40018280
=>  Start address 40000000
=>  Transfer rate: 720224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx13.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 772/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:764  W:0    | mipstx39/jmr3904: psx14.exe
Result: invalid   
Time: 0:00:00.252963 psx14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx14.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10560 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010560
=>  Loading section .data, size 0x310 lma 40012e80
=>  Start address 40000000
=>  Transfer rate: 542592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx14.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 773/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:764  W:0    | mipstx39/jmr3904: psx15.exe
Result: invalid   
Time: 0:00:00.254295 psx15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx15.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf070 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f070
=>  Loading section .data, size 0x310 lma 40011cc0
=>  Start address 40000000
=>  Transfer rate: 499712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx15.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 774/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:772  W:0    | mipstx39/jmr3904: psx16.exe
Result: invalid   
Time: 0:00:00.505650 psx16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psx16.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psx16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400102a0
=>  Loading section .data, size 0x320 lma 40012bc0
=>  Start address 40000000
=>  Transfer rate: 537088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psx16.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 775/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:772  W:0    | mipstx39/jmr3904: psxaio01.exe
Result: invalid   
Time: 0:00:00.504811 psxaio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxaio01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxaio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12cf0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012cf0
=>  Loading section .data, size 0x310 lma 40016d40
=>  Start address 40000000
=>  Transfer rate: 623616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxaio01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 776/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:772  W:0    | mipstx39/jmr3904: psxaio02.exe
Result: invalid   
Time: 0:00:00.516075 psxaio02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxaio02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxaio02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18920 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40018920
=>  Loading section .data, size 0x470 lma 4001c940
=>  Start address 40000000
=>  Transfer rate: 815232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxaio02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 777/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:772  W:0    | mipstx39/jmr3904: psxaio03.exe
Result: invalid   
Time: 0:00:00.515352 psxaio03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxaio03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxaio03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18430 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40018430
=>  Loading section .data, size 0x480 lma 4001c480
=>  Start address 40000000
=>  Transfer rate: 805248 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxaio03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 778/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:772  W:0    | mipstx39/jmr3904: psxalarm01.exe
Result: invalid   
Time: 0:00:00.510037 psxalarm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxalarm01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxalarm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11840 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011840
=>  Loading section .data, size 0x350 lma 40013e80
=>  Start address 40000000
=>  Transfer rate: 581760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxalarm01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 779/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:772  W:0    | mipstx39/jmr3904: psxautoinit01.exe
Result: invalid   
Time: 0:00:00.252293 psxautoinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxautoinit01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxautoinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a40 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40010a40
=>  Loading section .data, size 0x2e0 lma 40013080
=>  Start address 40000000
=>  Transfer rate: 552064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxautoinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 780/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:772  W:0    | mipstx39/jmr3904: psxautoinit02.exe
Result: invalid   
Time: 0:00:00.253809 psxautoinit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxautoinit02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxautoinit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x123b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400123b0
=>  Loading section .data, size 0x310 lma 40014a00
=>  Start address 40000000
=>  Transfer rate: 604672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxautoinit02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 781/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:772  W:0    | mipstx39/jmr3904: psxbarrier01.exe
Result: invalid   
Time: 0:00:00.251591 psxbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxbarrier01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11530 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011530
=>  Loading section .data, size 0x390 lma 40015840
=>  Start address 40000000
=>  Transfer rate: 576000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 782/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:780  W:0    | mipstx39/jmr3904: psxcancel.exe
Result: invalid   
Time: 0:00:00.515514 psxcancel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxcancel.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxcancel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14230 lma 40000000
=>  Loading section .tdata, size 0xc lma 40014230
=>  Loading section .rtemsroset, size 0x80 lma 40014240
=>  Loading section .data, size 0x390 lma 40016b80
=>  Start address 40000000
=>  Transfer rate: 668256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxcancel.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 783/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:780  W:0    | mipstx39/jmr3904: psxcancel01.exe
Result: invalid   
Time: 0:00:00.517986 psxcancel01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxcancel01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxcancel01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11000 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011000
=>  Loading section .data, size 0x340 lma 40013980
=>  Start address 40000000
=>  Transfer rate: 564736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxcancel01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 784/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:780  W:0    | mipstx39/jmr3904: psxchroot01.exe
Result: invalid   
Time: 0:00:00.513427 psxchroot01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxchroot01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxchroot01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeb50 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eb50
=>  Loading section .data, size 0x320 lma 40011180
=>  Start address 40000000
=>  Transfer rate: 489216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxchroot01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 785/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:780  W:0    | mipstx39/jmr3904: psxclassic01.exe
Result: invalid   
Time: 0:00:00.511354 psxclassic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxclassic01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxclassic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11e80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011e80
=>  Loading section .data, size 0x3a0 lma 400147c0
=>  Start address 40000000
=>  Transfer rate: 595200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxclassic01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 786/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:780  W:0    | mipstx39/jmr3904: psxcleanup.exe
Result: invalid   
Time: 0:00:00.503647 psxcleanup.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxcleanup.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxcleanup.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13590 lma 40000000
=>  Loading section .tdata, size 0xc lma 40013590
=>  Loading section .rtemsroset, size 0x80 lma 400135a0
=>  Loading section .data, size 0x360 lma 40016480
=>  Start address 40000000
=>  Transfer rate: 642016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxcleanup.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 787/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:780  W:0    | mipstx39/jmr3904: psxcleanup01.exe
Result: invalid   
Time: 0:00:00.510563 psxcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxcleanup01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfae0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fae0
=>  Loading section .data, size 0x380 lma 40012400
=>  Start address 40000000
=>  Transfer rate: 521984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 788/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:780  W:0    | mipstx39/jmr3904: psxcleanup02.exe
Result: invalid   
Time: 0:00:00.536567 psxcleanup02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxcleanup02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxcleanup02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf410 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f410
=>  Loading section .data, size 0x380 lma 40011d80
=>  Start address 40000000
=>  Transfer rate: 508032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxcleanup02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 789/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:780  W:0    | mipstx39/jmr3904: psxclock.exe
Result: invalid   
Time: 0:00:00.511208 psxclock.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxclock.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxclock.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18480 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40018480
=>  Loading section .data, size 0x510 lma 4001b380
=>  Start address 40000000
=>  Transfer rate: 807040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxclock.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 790/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:788  W:0    | mipstx39/jmr3904: psxclock01.exe
Result: invalid   
Time: 0:00:00.310173 psxclock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxclock01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxclock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf830 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f830
=>  Loading section .data, size 0x310 lma 40012180
=>  Start address 40000000
=>  Transfer rate: 515584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxclock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 791/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:788  W:0    | mipstx39/jmr3904: psxclockrealtime01.exe
Result: invalid   
Time: 0:00:00.261133 psxclockrealtime01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxclockrealtime01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxclockrealtime01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14e30 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014e30
=>  Loading section .data, size 0x370 lma 400177c0
=>  Start address 40000000
=>  Transfer rate: 692480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxclockrealtime01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 792/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:788  W:0    | mipstx39/jmr3904: psxconcurrency01.exe
Result: invalid   
Time: 0:00:00.529258 psxconcurrency01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxconcurrency01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxconcurrency01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xebf0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ebf0
=>  Loading section .data, size 0x2e0 lma 40011240
=>  Start address 40000000
=>  Transfer rate: 489984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxconcurrency01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 793/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:788  W:0    | mipstx39/jmr3904: psxcond01.exe
Result: invalid   
Time: 0:00:00.583502 psxcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxcond01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12660 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012660
=>  Loading section .data, size 0x320 lma 40014f80
=>  Start address 40000000
=>  Transfer rate: 610304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 794/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:788  W:0    | mipstx39/jmr3904: psxcond02.exe
Result: invalid   
Time: 0:00:00.512881 psxcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxcond02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10120 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40010120
=>  Loading section .data, size 0x2e0 lma 40012780
=>  Start address 40000000
=>  Transfer rate: 533376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 795/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:788  W:0    | mipstx39/jmr3904: psxconfig01.exe
Result: invalid   
Time: 0:00:00.514264 psxconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxconfig01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x140a0 lma 40000000
=>  Loading section .rtemsroset, size 0xb0 lma 400140a0
=>  Loading section .data, size 0x5f0 lma 40021600
=>  Start address 40000000
=>  Transfer rate: 670208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 796/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:788  W:0    | mipstx39/jmr3904: psxconfstr.exe
Result: invalid   
Time: 0:00:00.508541 psxconfstr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxconfstr.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxconfstr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15fc0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40015fc0
=>  Loading section .data, size 0x330 lma 40018600
=>  Start address 40000000
=>  Transfer rate: 727936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxconfstr.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 797/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:788  W:0    | mipstx39/jmr3904: psxdevctl01.exe
Result: invalid   
Time: 0:00:00.527323 psxdevctl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxdevctl01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxdevctl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12160 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40012160
=>  Loading section .data, size 0x2e0 lma 400147c0
=>  Start address 40000000
=>  Transfer rate: 599424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxdevctl01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 798/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:790  W:0    | mipstx39/jmr3904: psxeintr_join.exe
Result: invalid   
Time: 0:00:00.256068 psxeintr_join.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxeintr_join.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxeintr_join.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10de0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010de0
=>  Loading section .data, size 0x310 lma 40013700
=>  Start address 40000000
=>  Transfer rate: 560000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxeintr_join.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 799/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:790  W:0    | mipstx39/jmr3904: psxenosys.exe
Result: invalid   
Time: 0:00:00.253328 psxenosys.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxenosys.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxenosys.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x114f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400114f0
=>  Loading section .data, size 0x310 lma 40013e40
=>  Start address 40000000
=>  Transfer rate: 574464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxenosys.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 800/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:798  W:0    | mipstx39/jmr3904: psxfatal01.exe
Result: invalid   
Time: 0:00:00.527827 psxfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxfatal01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010a40
=>  Loading section .data, size 0x310 lma 40013080
=>  Start address 40000000
=>  Transfer rate: 552576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 801/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:798  W:0    | mipstx39/jmr3904: psxfatal02.exe
Result: invalid   
Time: 0:00:00.519968 psxfatal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxfatal02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxfatal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109d0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 400109d0
=>  Loading section .data, size 0x310 lma 40013000
=>  Start address 40000000
=>  Transfer rate: 551552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxfatal02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 802/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:798  W:0    | mipstx39/jmr3904: psxfchx01.exe
Result: invalid   
Time: 0:00:00.280406 psxfchx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxfchx01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxfchx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10360 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010360
=>  Loading section .data, size 0x310 lma 400129c0
=>  Start address 40000000
=>  Transfer rate: 538496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxfchx01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 803/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:798  W:0    | mipstx39/jmr3904: psxfenv01.exe
Result: invalid   
Time: 0:00:00.538214 psxfenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxfenv01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxfenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d50 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40011d50
=>  Loading section .data, size 0x2e0 lma 40014380
=>  Start address 40000000
=>  Transfer rate: 591104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxfenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 804/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:798  W:0    | mipstx39/jmr3904: psxfile01.exe
Result: invalid   
Time: 0:00:00.518501 psxfile01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxfile01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxfile01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23470 lma 40000000
=>  Loading section .tdata, size 0xc lma 40023470
=>  Loading section .rtemsroset, size 0x80 lma 40023480
=>  Loading section .data, size 0x510 lma 40025ac0
=>  Start address 40000000
=>  Transfer rate: 1167456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxfile01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 805/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:798  W:0    | mipstx39/jmr3904: psxfile02.exe
Result: invalid   
Time: 0:00:00.571012 psxfile02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxfile02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxfile02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10de0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010de0
=>  Loading section .data, size 0x310 lma 40013440
=>  Start address 40000000
=>  Transfer rate: 560000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxfile02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 806/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:798  W:0    | mipstx39/jmr3904: psxfilelock01.exe
Result: invalid   
Time: 0:00:00.590824 psxfilelock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxfilelock01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxfilelock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109b0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400109b0
=>  Loading section .rtemsroset, size 0x80 lma 400109c0
=>  Loading section .data, size 0x310 lma 40013000
=>  Start address 40000000
=>  Transfer rate: 551520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxfilelock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 807/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:798  W:0    | mipstx39/jmr3904: psxftw01.exe
Result: invalid   
Time: 0:00:00.622324 psxftw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxftw01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxftw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a6b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001a6b0
=>  Loading section .data, size 0x3a0 lma 4001d2c0
=>  Start address 40000000
=>  Transfer rate: 874112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxftw01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 808/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:799  W:0    | mipstx39/jmr3904: psxgetattrnp01.exe
Result: invalid   
Time: 0:00:00.270762 psxgetattrnp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxgetattrnp01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxgetattrnp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10d90 lma 40000000
=>  Loading section .tdata, size 0xc lma 40010d90
=>  Loading section .rtemsroset, size 0x70 lma 40010da0
=>  Loading section .data, size 0x2f0 lma 400136c0
=>  Start address 40000000
=>  Transfer rate: 559072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxgetattrnp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 809/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:805  W:0    | mipstx39/jmr3904: psxgetrusage01.exe
Result: invalid   
Time: 0:00:00.509248 psxgetrusage01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxgetrusage01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxgetrusage01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f2d0
=>  Loading section .data, size 0x310 lma 40011940
=>  Start address 40000000
=>  Transfer rate: 504576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxgetrusage01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 810/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:805  W:0    | mipstx39/jmr3904: psxglobalcon01.exe
Result: invalid   
Time: 0:00:00.598212 psxglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxglobalcon01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xead0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ead0
=>  Loading section .data, size 0x2e0 lma 40011100
=>  Start address 40000000
=>  Transfer rate: 487680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 811/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:806  W:0    | mipstx39/jmr3904: psxglobalcon02.exe
Result: invalid   
Time: 0:00:00.573249 psxglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxglobalcon02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeef0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000eef0
=>  Loading section .data, size 0x350 lma 40011840
=>  Start address 40000000
=>  Transfer rate: 497152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 812/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:805  W:0    | mipstx39/jmr3904: psxid01.exe
Result: invalid   
Time: 0:00:00.511101 psxid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxid01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11eb0 lma 40000000
=>  Loading section .tdata, size 0xc lma 40011eb0
=>  Loading section .rtemsroset, size 0x80 lma 40011ec0
=>  Loading section .data, size 0x340 lma 40014500
=>  Start address 40000000
=>  Transfer rate: 594912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxid01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 813/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:807  W:0    | mipstx39/jmr3904: psximfs01.exe
Result: invalid   
Time: 0:00:00.540580 psximfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psximfs01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psximfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10850 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010850
=>  Loading section .data, size 0x310 lma 40012ec0
=>  Start address 40000000
=>  Transfer rate: 548608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psximfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 814/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:807  W:0    | mipstx39/jmr3904: psximfs02.exe
Result: invalid   
Time: 0:00:00.511229 psximfs02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psximfs02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psximfs02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17b30 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40017b30
=>  Loading section .data, size 0x4a0 lma 4001a180
=>  Start address 40000000
=>  Transfer rate: 787072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psximfs02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 815/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:806  W:0    | mipstx39/jmr3904: psxintrcritical01.exe
Result: invalid   
Time: 0:00:00.553100 psxintrcritical01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxintrcritical01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxintrcritical01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15b20 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40015b20
=>  Loading section .data, size 0x420 lma 40018200
=>  Start address 40000000
=>  Transfer rate: 720512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxintrcritical01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 816/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:807  W:0    | mipstx39/jmr3904: psxinttypes01.exe
Result: invalid   
Time: 0:00:00.251752 psxinttypes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxinttypes01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxinttypes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13140 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40013140
=>  Loading section .data, size 0x440 lma 40015780
=>  Start address 40000000
=>  Transfer rate: 634752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxinttypes01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 817/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:809  W:0    | mipstx39/jmr3904: psxitimer.exe
Result: invalid   
Time: 0:00:00.504382 psxitimer.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxitimer.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxitimer.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fc80
=>  Loading section .data, size 0x310 lma 400122c0
=>  Start address 40000000
=>  Transfer rate: 524416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxitimer.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 818/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:810  W:0    | mipstx39/jmr3904: psxkey01.exe
Result: invalid   
Time: 0:00:00.510317 psxkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe8a0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e8a0
=>  Loading section .data, size 0x350 lma 40010f00
=>  Start address 40000000
=>  Transfer rate: 484096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 819/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:812  W:0    | mipstx39/jmr3904: psxkey02.exe
Result: invalid   
Time: 0:00:00.519323 psxkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef90 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ef90
=>  Loading section .data, size 0x350 lma 40011600
=>  Start address 40000000
=>  Transfer rate: 498304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 820/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:814  W:0    | mipstx39/jmr3904: psxkey03.exe
Result: invalid   
Time: 0:00:00.514444 psxkey03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffa0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000ffa0
=>  Loading section .data, size 0x380 lma 40012900
=>  Start address 40000000
=>  Transfer rate: 531712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 821/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:813  W:0    | mipstx39/jmr3904: psxkey04.exe
Result: invalid   
Time: 0:00:00.504624 psxkey04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10020 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010020
=>  Loading section .data, size 0x390 lma 40012c40
=>  Start address 40000000
=>  Transfer rate: 532864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 822/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:814  W:0    | mipstx39/jmr3904: psxkey05.exe
Result: invalid   
Time: 0:00:00.517449 psxkey05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe9f0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e9f0
=>  Loading section .data, size 0x350 lma 40011080
=>  Start address 40000000
=>  Transfer rate: 486784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 823/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:815  W:0    | mipstx39/jmr3904: psxkey06.exe
Result: invalid   
Time: 0:00:00.516569 psxkey06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10bc0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010bc0
=>  Loading section .data, size 0x390 lma 40013800
=>  Start address 40000000
=>  Transfer rate: 556672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 824/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:815  W:0    | mipstx39/jmr3904: psxkey07.exe
Result: invalid   
Time: 0:00:00.257017 psxkey07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011b80
=>  Loading section .data, size 0x380 lma 40015bc0
=>  Start address 40000000
=>  Transfer rate: 588800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 825/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:821  W:0    | mipstx39/jmr3904: psxkey08.exe
Result: invalid   
Time: 0:00:00.505325 psxkey08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400105a0
=>  Loading section .data, size 0x380 lma 40015200
=>  Start address 40000000
=>  Transfer rate: 544000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 826/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:821  W:0    | mipstx39/jmr3904: psxkey09.exe
Result: invalid   
Time: 0:00:00.514149 psxkey09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey09.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fe60
=>  Loading section .data, size 0x380 lma 400127c0
=>  Start address 40000000
=>  Transfer rate: 529152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey09.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 827/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:822  W:0    | mipstx39/jmr3904: psxkey10.exe
Result: invalid   
Time: 0:00:00.521119 psxkey10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey10.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxkey10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe70 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fe70
=>  Loading section .data, size 0x380 lma 400127c0
=>  Start address 40000000
=>  Transfer rate: 529280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxkey10.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 828/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:823  W:0    | mipstx39/jmr3904: psxmmap01.exe
Result: invalid   
Time: 0:00:00.523381 psxmmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxmmap01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxmmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18c60 lma 40000000
=>  Loading section .tdata, size 0xc lma 40018c60
=>  Loading section .rtemsroset, size 0x80 lma 40018c70
=>  Loading section .data, size 0x4f0 lma 4001b300
=>  Start address 40000000
=>  Transfer rate: 823008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxmmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 829/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:823  W:0    | mipstx39/jmr3904: psxmount.exe
Result: invalid   
Time: 0:00:00.505511 psxmount.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxmount.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxmount.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x121e0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400121e0
=>  Loading section .rtemsroset, size 0x70 lma 400121f0
=>  Loading section .data, size 0x3c0 lma 40014840
=>  Start address 40000000
=>  Transfer rate: 602336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxmount.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 830/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:823  W:0    | mipstx39/jmr3904: psxmsgq01.exe
Result: invalid   
Time: 0:00:00.521219 psxmsgq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26050 lma 40000000
=>  Loading section .tdata, size 0xc lma 40026050
=>  Loading section .rtemsroset, size 0x80 lma 40026060
=>  Loading section .data, size 0x750 lma 400298c0
=>  Start address 40000000
=>  Transfer rate: 1261920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 831/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:823  W:0    | mipstx39/jmr3904: psxmsgq02.exe
Result: invalid   
Time: 0:00:00.528657 psxmsgq02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16600 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40016600
=>  Loading section .data, size 0x530 lma 40019c40
=>  Start address 40000000
=>  Transfer rate: 744832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 832/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:823  W:0    | mipstx39/jmr3904: psxmsgq03.exe
Result: invalid   
Time: 0:00:00.252184 psxmsgq03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13440 lma 40000000
=>  Loading section .tdata, size 0xc lma 40013440
=>  Loading section .rtemsroset, size 0x80 lma 40013450
=>  Loading section .data, size 0x380 lma 40015b80
=>  Start address 40000000
=>  Transfer rate: 639584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 833/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:830  W:0    | mipstx39/jmr3904: psxmsgq04.exe
Result: invalid   
Time: 0:00:00.528106 psxmsgq04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12640 lma 40000000
=>  Loading section .tdata, size 0xc lma 40012640
=>  Loading section .rtemsroset, size 0x80 lma 40012650
=>  Loading section .data, size 0x350 lma 40014d00
=>  Start address 40000000
=>  Transfer rate: 610528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxmsgq04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 834/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:831  W:0    | mipstx39/jmr3904: psxmutexattr01.exe
Result: invalid   
Time: 0:00:00.505231 psxmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxmutexattr01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf070 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f070
=>  Loading section .data, size 0x310 lma 400116c0
=>  Start address 40000000
=>  Transfer rate: 499584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 835/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:831  W:0    | mipstx39/jmr3904: psxndbm01.exe
Result: invalid   
Time: 0:00:00.527706 psxndbm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxndbm01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxndbm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17510 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40017510
=>  Loading section .data, size 0x2f0 lma 40019b40
=>  Start address 40000000
=>  Transfer rate: 770944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxndbm01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 836/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:831  W:0    | mipstx39/jmr3904: psxobj01.exe
Result: invalid   
Time: 0:00:00.511938 psxobj01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxobj01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxobj01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe8d0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e8d0
=>  Loading section .data, size 0x310 lma 40010f00
=>  Start address 40000000
=>  Transfer rate: 483968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxobj01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 837/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:831  W:0    | mipstx39/jmr3904: psxonce01.exe
Result: invalid   
Time: 0:00:00.526669 psxonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxonce01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xecc0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ecc0
=>  Loading section .data, size 0x300 lma 40011600
=>  Start address 40000000
=>  Transfer rate: 491904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 838/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:831  W:0    | mipstx39/jmr3904: psxpasswd01.exe
Result: invalid   
Time: 0:00:00.513921 psxpasswd01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxpasswd01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxpasswd01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x127b0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400127b0
=>  Loading section .rtemsroset, size 0x80 lma 400127c0
=>  Loading section .data, size 0x3b0 lma 40014e40
=>  Start address 40000000
=>  Transfer rate: 614240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxpasswd01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 839/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:831  W:0    | mipstx39/jmr3904: psxpasswd02.exe
Result: invalid   
Time: 0:00:00.511736 psxpasswd02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxpasswd02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxpasswd02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bc10 lma 40000000
=>  Loading section .tdata, size 0xc lma 4001bc10
=>  Loading section .rtemsroset, size 0x80 lma 4001bc20
=>  Loading section .data, size 0x510 lma 4001e280
=>  Start address 40000000
=>  Transfer rate: 920928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxpasswd02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 840/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:831  W:0    | mipstx39/jmr3904: psxpipe01.exe
Result: invalid   
Time: 0:00:00.257816 psxpipe01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxpipe01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxpipe01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16d00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40016d00
=>  Loading section .data, size 0x4a0 lma 40019340
=>  Start address 40000000
=>  Transfer rate: 758016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxpipe01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 841/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:839  W:0    | mipstx39/jmr3904: psxrdwrv.exe
Result: invalid   
Time: 0:00:00.535678 psxrdwrv.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxrdwrv.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxrdwrv.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c40 lma 40000000
=>  Loading section .tdata, size 0xc lma 40012c40
=>  Loading section .rtemsroset, size 0x80 lma 40012c50
=>  Loading section .data, size 0x310 lma 400152c0
=>  Start address 40000000
=>  Transfer rate: 622304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxrdwrv.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 842/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:839  W:0    | mipstx39/jmr3904: psxreaddir.exe
Result: invalid   
Time: 0:00:00.530278 psxreaddir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxreaddir.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxreaddir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11850 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40011850
=>  Loading section .data, size 0x3c0 lma 40013e80
=>  Start address 40000000
=>  Transfer rate: 582656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxreaddir.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 843/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:839  W:0    | mipstx39/jmr3904: psxrwlock01.exe
Result: invalid   
Time: 0:00:00.510839 psxrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxrwlock01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14970 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014970
=>  Loading section .data, size 0x390 lma 40017580
=>  Start address 40000000
=>  Transfer rate: 683008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 844/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:839  W:0    | mipstx39/jmr3904: psxsem01.exe
Result: invalid   
Time: 0:00:00.532929 psxsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsem01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c280 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001c280
=>  Loading section .data, size 0x4b0 lma 4001ec40
=>  Start address 40000000
=>  Transfer rate: 933248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 845/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:839  W:0    | mipstx39/jmr3904: psxshm01.exe
Result: invalid   
Time: 0:00:00.506277 psxshm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxshm01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxshm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11ae0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011ae0
=>  Loading section .data, size 0x340 lma 40014180
=>  Start address 40000000
=>  Transfer rate: 587008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxshm01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 846/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:839  W:0    | mipstx39/jmr3904: psxshm02.exe
Result: invalid   
Time: 0:00:00.503709 psxshm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxshm02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxshm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d20 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011d20
=>  Loading section .data, size 0x340 lma 400143c0
=>  Start address 40000000
=>  Transfer rate: 591616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxshm02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 847/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:839  W:0    | mipstx39/jmr3904: psxsignal01.exe
Result: invalid   
Time: 0:00:00.558640 psxsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16d40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40016d40
=>  Loading section .data, size 0x550 lma 40019c80
=>  Start address 40000000
=>  Transfer rate: 759936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 848/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:839  W:0    | mipstx39/jmr3904: psxsignal02.exe
Result: invalid   
Time: 0:00:00.519725 psxsignal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11840 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011840
=>  Loading section .data, size 0x3a0 lma 40015580
=>  Start address 40000000
=>  Transfer rate: 582400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsignal02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 849/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:847  W:0    | mipstx39/jmr3904: psxsignal03.exe
Result: invalid   
Time: 0:00:00.505330 psxsignal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400119a0
=>  Loading section .data, size 0x320 lma 400145c0
=>  Start address 40000000
=>  Transfer rate: 584192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsignal03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 850/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:847  W:0    | mipstx39/jmr3904: psxsignal04.exe
Result: invalid   
Time: 0:00:00.540775 psxsignal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x119c0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400119c0
=>  Loading section .data, size 0x320 lma 400145c0
=>  Start address 40000000
=>  Transfer rate: 584448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsignal04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 851/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:847  W:0    | mipstx39/jmr3904: psxsignal05.exe
Result: invalid   
Time: 0:00:00.765102 psxsignal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff20 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000ff20
=>  Loading section .data, size 0x310 lma 40012580
=>  Start address 40000000
=>  Transfer rate: 529792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsignal05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 852/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:847  W:0    | mipstx39/jmr3904: psxsignal06.exe
Result: invalid   
Time: 0:00:00.553370 psxsignal06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11bd0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011bd0
=>  Loading section .data, size 0x320 lma 40014500
=>  Start address 40000000
=>  Transfer rate: 588672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsignal06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 853/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:847  W:0    | mipstx39/jmr3904: psxsignal07.exe
Result: invalid   
Time: 0:00:00.504178 psxsignal07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14420 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014420
=>  Loading section .data, size 0x390 lma 40019580
=>  Start address 40000000
=>  Transfer rate: 672128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsignal07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 854/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:847  W:0    | mipstx39/jmr3904: psxsignal08.exe
Result: invalid   
Time: 0:00:00.511525 psxsignal08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsignal08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14110 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014110
=>  Loading section .data, size 0x310 lma 40017b80
=>  Start address 40000000
=>  Transfer rate: 664832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsignal08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 855/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:847  W:0    | mipstx39/jmr3904: psxspin01.exe
Result: invalid   
Time: 0:00:00.768143 psxspin01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxspin01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxspin01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf500 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f500
=>  Loading section .data, size 0x310 lma 40011e40
=>  Start address 40000000
=>  Transfer rate: 509056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxspin01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 856/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:847  W:0    | mipstx39/jmr3904: psxstack01.exe
Result: invalid   
Time: 0:00:00.517694 psxstack01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxstack01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxstack01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x101e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400101e0
=>  Loading section .data, size 0x320 lma 40012b00
=>  Start address 40000000
=>  Transfer rate: 535552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxstack01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 857/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:848  W:0    | mipstx39/jmr3904: psxstack02.exe
Result: invalid   
Time: 0:00:00.258373 psxstack02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxstack02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxstack02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x101d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400101d0
=>  Loading section .data, size 0x320 lma 40012b00
=>  Start address 40000000
=>  Transfer rate: 535424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxstack02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 858/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:853  W:0    | mipstx39/jmr3904: psxstat.exe
Result: invalid   
Time: 0:00:00.530453 psxstat.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxstat.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxstat.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1fe50 lma 40000000
=>  Loading section .tdata, size 0xc lma 4001fe50
=>  Loading section .rtemsroset, size 0x80 lma 4001fe60
=>  Loading section .data, size 0x670 lma 400224c0
=>  Start address 40000000
=>  Transfer rate: 1059424 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxstat.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 859/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:853  W:0    | mipstx39/jmr3904: psxstrsignal01.exe
Result: invalid   
Time: 0:00:00.504333 psxstrsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxstrsignal01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxstrsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11a70 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011a70
=>  Loading section .data, size 0x560 lma 400140c0
=>  Start address 40000000
=>  Transfer rate: 590464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxstrsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 860/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:855  W:0    | mipstx39/jmr3904: psxsysconf.exe
Result: invalid   
Time: 0:00:00.513970 psxsysconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxsysconf.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxsysconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010b00
=>  Loading section .data, size 0x310 lma 40013440
=>  Start address 40000000
=>  Transfer rate: 554112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxsysconf.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 861/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:855  W:0    | mipstx39/jmr3904: psxthreadname01.exe
Result: invalid   
Time: 0:00:00.541128 psxthreadname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxthreadname01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxthreadname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf200 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f200
=>  Loading section .data, size 0x310 lma 40011840
=>  Start address 40000000
=>  Transfer rate: 502912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxthreadname01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 862/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:855  W:0    | mipstx39/jmr3904: psxtime.exe
Result: invalid   
Time: 0:00:00.541895 psxtime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxtime.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxtime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16780 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40016780
=>  Loading section .data, size 0x5f0 lma 40018dc0
=>  Start address 40000000
=>  Transfer rate: 749440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxtime.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 863/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:855  W:0    | mipstx39/jmr3904: psxtimer01.exe
Result: invalid   
Time: 0:00:00.518238 psxtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxtimer01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x215e0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400215e0
=>  Loading section .rtemsroset, size 0x80 lma 400215f0
=>  Loading section .data, size 0x530 lma 40024a80
=>  Start address 40000000
=>  Transfer rate: 1105120 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 864/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:856  W:0    | mipstx39/jmr3904: psxtimer02.exe
Result: invalid   
Time: 0:00:00.257499 psxtimer02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxtimer02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxtimer02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c70 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012c70
=>  Loading section .data, size 0x340 lma 40015340
=>  Start address 40000000
=>  Transfer rate: 622976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxtimer02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 865/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:856  W:0    | mipstx39/jmr3904: psxtimer_face01.exe
Result: invalid   
Time: 0:00:00.261518 psxtimer_face01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxtimer_face01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxtimer_face01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11900 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011900
=>  Loading section .data, size 0x340 lma 40014000
=>  Start address 40000000
=>  Transfer rate: 583168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxtimer_face01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 866/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:858  W:0    | mipstx39/jmr3904: psxtimes01.exe
Result: invalid   
Time: 0:00:00.514271 psxtimes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxtimes01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxtimes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf250 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f250
=>  Loading section .data, size 0x310 lma 400118c0
=>  Start address 40000000
=>  Transfer rate: 503552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxtimes01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 867/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:862  W:0    | mipstx39/jmr3904: psxualarm.exe
Result: invalid   
Time: 0:00:00.504880 psxualarm.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxualarm.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxualarm.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x168d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400168d0
=>  Loading section .data, size 0x540 lma 400197c0
=>  Start address 40000000
=>  Transfer rate: 750720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxualarm.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 868/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:864  W:0    | mipstx39/jmr3904: psxusleep.exe
Result: invalid   
Time: 0:00:00.509075 psxusleep.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtests/psxusleep.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtests/psxusleep.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16b80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40016b80
=>  Loading section .data, size 0x510 lma 400191c0
=>  Start address 40000000
=>  Transfer rate: 755840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtests/psxusleep.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 869/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:864  W:0    | mipstx39/jmr3904: psxtmbarrier01.exe
Result: invalid   
Time: 0:00:00.521770 psxtmbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xec90 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ec90
=>  Loading section .data, size 0x2e0 lma 400112c0
=>  Start address 40000000
=>  Transfer rate: 491264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 870/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:864  W:0    | mipstx39/jmr3904: psxtmbarrier02.exe
Result: invalid   
Time: 0:00:00.537358 psxtmbarrier02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef60 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ef60
=>  Loading section .data, size 0x2e0 lma 40023800
=>  Start address 40000000
=>  Transfer rate: 497024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 871/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:864  W:0    | mipstx39/jmr3904: psxtmbarrier03.exe
Result: invalid   
Time: 0:00:00.505413 psxtmbarrier03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeed0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eed0
=>  Loading section .data, size 0x2e0 lma 40011800
=>  Start address 40000000
=>  Transfer rate: 495872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 872/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:864  W:0    | mipstx39/jmr3904: psxtmbarrier04.exe
Result: invalid   
Time: 0:00:00.514199 psxtmbarrier04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf180 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f180
=>  Loading section .data, size 0x2e0 lma 40011ac0
=>  Start address 40000000
=>  Transfer rate: 501376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrier04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 873/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:864  W:0    | mipstx39/jmr3904: psxtmbarrierattr01.exe
Result: invalid   
Time: 0:00:00.538750 psxtmbarrierattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrierattr01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrierattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xed70 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ed70
=>  Loading section .data, size 0x2e0 lma 400113c0
=>  Start address 40000000
=>  Transfer rate: 493056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmbarrierattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 874/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:868  W:0    | mipstx39/jmr3904: psxtmcleanup01.exe
Result: invalid   
Time: 0:00:00.251808 psxtmcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcleanup01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeca0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eca0
=>  Loading section .data, size 0x310 lma 40011300
=>  Start address 40000000
=>  Transfer rate: 491776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 875/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:869  W:0    | mipstx39/jmr3904: psxtmclocknanosleep01.exe
Result: invalid   
Time: 0:00:00.270409 psxtmclocknanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmclocknanosleep01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmclocknanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf270 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f270
=>  Loading section .data, size 0x2f0 lma 400118c0
=>  Start address 40000000
=>  Transfer rate: 503424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmclocknanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 876/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:868  W:0    | mipstx39/jmr3904: psxtmclocknanosleep02.exe
Result: invalid   
Time: 0:00:00.509899 psxtmclocknanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmclocknanosleep02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmclocknanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf3c0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f3c0
=>  Loading section .data, size 0x2f0 lma 40023c80
=>  Start address 40000000
=>  Transfer rate: 506112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmclocknanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 877/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:869  W:0    | mipstx39/jmr3904: psxtmclocknanosleep03.exe
Result: invalid   
Time: 0:00:00.533036 psxtmclocknanosleep03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmclocknanosleep03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmclocknanosleep03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf3c0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f3c0
=>  Loading section .data, size 0x2f0 lma 40023c80
=>  Start address 40000000
=>  Transfer rate: 506112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmclocknanosleep03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 878/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:873  W:0    | mipstx39/jmr3904: psxtmcond01.exe
Result: invalid   
Time: 0:00:00.506344 psxtmcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xed60 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ed60
=>  Loading section .data, size 0x2e0 lma 400113c0
=>  Start address 40000000
=>  Transfer rate: 492928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 879/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:873  W:0    | mipstx39/jmr3904: psxtmcond02.exe
Result: invalid   
Time: 0:00:00.510212 psxtmcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef60 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ef60
=>  Loading section .data, size 0x2e0 lma 400115c0
=>  Start address 40000000
=>  Transfer rate: 497024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 880/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:874  W:0    | mipstx39/jmr3904: psxtmcond03.exe
Result: invalid   
Time: 0:00:00.535464 psxtmcond03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10330 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40010330
=>  Loading section .data, size 0x2e0 lma 40012c40
=>  Start address 40000000
=>  Transfer rate: 537600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 881/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:874  W:0    | mipstx39/jmr3904: psxtmcond04.exe
Result: invalid   
Time: 0:00:00.512567 psxtmcond04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10320 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40010320
=>  Loading section .data, size 0x2e0 lma 40012c40
=>  Start address 40000000
=>  Transfer rate: 537472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 882/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:874  W:0    | mipstx39/jmr3904: psxtmcond05.exe
Result: invalid   
Time: 0:00:00.256941 psxtmcond05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef60 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ef60
=>  Loading section .data, size 0x2e0 lma 400115c0
=>  Start address 40000000
=>  Transfer rate: 497024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 883/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:877  W:0    | mipstx39/jmr3904: psxtmcond06.exe
Result: invalid   
Time: 0:00:00.260057 psxtmcond06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10460 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40010460
=>  Loading section .data, size 0x2e0 lma 40013c00
=>  Start address 40000000
=>  Transfer rate: 540032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 884/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:877  W:0    | mipstx39/jmr3904: psxtmcond07.exe
Result: invalid   
Time: 0:00:00.273125 psxtmcond07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10160 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40010160
=>  Loading section .data, size 0x2e0 lma 40012d80
=>  Start address 40000000
=>  Transfer rate: 533888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 885/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:882  W:0    | mipstx39/jmr3904: psxtmcond08.exe
Result: invalid   
Time: 0:00:00.574872 psxtmcond08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff50 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ff50
=>  Loading section .data, size 0x2e0 lma 40024800
=>  Start address 40000000
=>  Transfer rate: 529664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 886/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:880  W:0    | mipstx39/jmr3904: psxtmcond09.exe
Result: invalid   
Time: 0:00:00.541881 psxtmcond09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond09.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffa0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ffa0
=>  Loading section .data, size 0x2e0 lma 40024840
=>  Start address 40000000
=>  Transfer rate: 530304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond09.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 887/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:881  W:0    | mipstx39/jmr3904: psxtmcond10.exe
Result: invalid   
Time: 0:00:00.532872 psxtmcond10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond10.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10000 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40010000
=>  Loading section .data, size 0x2e0 lma 400248c0
=>  Start address 40000000
=>  Transfer rate: 531072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmcond10.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 888/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:881  W:0    | mipstx39/jmr3904: psxtmkey01.exe
Result: invalid   
Time: 0:00:00.502824 psxtmkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmkey01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xee60 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ee60
=>  Loading section .data, size 0x350 lma 400117c0
=>  Start address 40000000
=>  Transfer rate: 495872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 889/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:881  W:0    | mipstx39/jmr3904: psxtmkey02.exe
Result: invalid   
Time: 0:00:00.513052 psxtmkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmkey02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf260 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f260
=>  Loading section .data, size 0x350 lma 40011bc0
=>  Start address 40000000
=>  Transfer rate: 504064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 890/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:883  W:0    | mipstx39/jmr3904: psxtmmq01.exe
Result: invalid   
Time: 0:00:00.292033 psxtmmq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmq01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11410 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011410
=>  Loading section .data, size 0x320 lma 40013b40
=>  Start address 40000000
=>  Transfer rate: 572800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmq01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 891/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:883  W:0    | mipstx39/jmr3904: psxtmmqrcvblock01.exe
Result: invalid   
Time: 0:00:00.259529 psxtmmqrcvblock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmqrcvblock01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmqrcvblock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa00 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fa00
=>  Loading section .data, size 0x310 lma 400242c0
=>  Start address 40000000
=>  Transfer rate: 519168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmqrcvblock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 892/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:883  W:0    | mipstx39/jmr3904: psxtmmqrcvblock02.exe
Result: invalid   
Time: 0:00:00.275886 psxtmmqrcvblock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmqrcvblock02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmqrcvblock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x130f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400130f0
=>  Loading section .data, size 0x380 lma 400279c0
=>  Start address 40000000
=>  Transfer rate: 632704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmqrcvblock02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 893/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:884  W:0    | mipstx39/jmr3904: psxtmmutex01.exe
Result: invalid   
Time: 0:00:00.258068 psxtmmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xede0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ede0
=>  Loading section .data, size 0x2e0 lma 40011440
=>  Start address 40000000
=>  Transfer rate: 493952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 894/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:892  W:0    | mipstx39/jmr3904: psxtmmutex02.exe
Result: invalid   
Time: 0:00:00.259710 psxtmmutex02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf520 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f520
=>  Loading section .data, size 0x2e0 lma 40023dc0
=>  Start address 40000000
=>  Transfer rate: 508800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 895/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:892  W:0    | mipstx39/jmr3904: psxtmmutex03.exe
Result: invalid   
Time: 0:00:00.512305 psxtmmutex03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd10 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fd10
=>  Loading section .data, size 0x2e0 lma 40012340
=>  Start address 40000000
=>  Transfer rate: 525056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 896/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:892  W:0    | mipstx39/jmr3904: psxtmmutex04.exe
Result: invalid   
Time: 0:00:00.515765 psxtmmutex04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf820 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f820
=>  Loading section .data, size 0x2e0 lma 400240c0
=>  Start address 40000000
=>  Transfer rate: 514944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 897/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:892  W:0    | mipstx39/jmr3904: psxtmmutex05.exe
Result: invalid   
Time: 0:00:00.507371 psxtmmutex05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf730 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f730
=>  Loading section .data, size 0x2e0 lma 40012040
=>  Start address 40000000
=>  Transfer rate: 513024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 898/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:892  W:0    | mipstx39/jmr3904: psxtmmutex06.exe
Result: invalid   
Time: 0:00:00.505438 psxtmmutex06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf900 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f900
=>  Loading section .data, size 0x2e0 lma 400241c0
=>  Start address 40000000
=>  Transfer rate: 516736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 899/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:892  W:0    | mipstx39/jmr3904: psxtmmutex07.exe
Result: invalid   
Time: 0:00:00.514841 psxtmmutex07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa50 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fa50
=>  Loading section .data, size 0x2e0 lma 40012080
=>  Start address 40000000
=>  Transfer rate: 519424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutex07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 900/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:892  W:0    | mipstx39/jmr3904: psxtmmutexattr01.exe
Result: invalid   
Time: 0:00:00.507276 psxtmmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutexattr01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf240 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f240
=>  Loading section .data, size 0x2e0 lma 40011880
=>  Start address 40000000
=>  Transfer rate: 502912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 901/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:892  W:0    | mipstx39/jmr3904: psxtmnanosleep01.exe
Result: invalid   
Time: 0:00:00.515796 psxtmnanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmnanosleep01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmnanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2b0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f2b0
=>  Loading section .data, size 0x2f0 lma 40011900
=>  Start address 40000000
=>  Transfer rate: 503936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmnanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 902/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:893  W:0    | mipstx39/jmr3904: psxtmnanosleep02.exe
Result: invalid   
Time: 0:00:00.266354 psxtmnanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmnanosleep02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmnanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf3e0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f3e0
=>  Loading section .data, size 0x2f0 lma 40023c80
=>  Start address 40000000
=>  Transfer rate: 506368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmnanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 903/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:901  W:0    | mipstx39/jmr3904: psxtmonce01.exe
Result: invalid   
Time: 0:00:00.511396 psxtmonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmonce01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef30 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ef30
=>  Loading section .data, size 0x300 lma 40011580
=>  Start address 40000000
=>  Transfer rate: 496896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 904/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:901  W:0    | mipstx39/jmr3904: psxtmrwlock01.exe
Result: invalid   
Time: 0:00:00.524132 psxtmrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb70 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fb70
=>  Loading section .data, size 0x2e0 lma 400121c0
=>  Start address 40000000
=>  Transfer rate: 521728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 905/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:901  W:0    | mipstx39/jmr3904: psxtmrwlock02.exe
Result: invalid   
Time: 0:00:00.549587 psxtmrwlock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf170 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f170
=>  Loading section .data, size 0x2e0 lma 40023a00
=>  Start address 40000000
=>  Transfer rate: 501248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 906/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:901  W:0    | mipstx39/jmr3904: psxtmrwlock03.exe
Result: invalid   
Time: 0:00:00.517232 psxtmrwlock03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf630 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f630
=>  Loading section .data, size 0x2e0 lma 40023ec0
=>  Start address 40000000
=>  Transfer rate: 510976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 907/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:901  W:0    | mipstx39/jmr3904: psxtmrwlock04.exe
Result: invalid   
Time: 0:00:00.534739 psxtmrwlock04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf030 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f030
=>  Loading section .data, size 0x2e0 lma 400238c0
=>  Start address 40000000
=>  Transfer rate: 498688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 908/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:901  W:0    | mipstx39/jmr3904: psxtmrwlock05.exe
Result: invalid   
Time: 0:00:00.504142 psxtmrwlock05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf4f0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f4f0
=>  Loading section .data, size 0x2e0 lma 40023d80
=>  Start address 40000000
=>  Transfer rate: 508416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 909/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:901  W:0    | mipstx39/jmr3904: psxtmrwlock06.exe
Result: invalid   
Time: 0:00:00.504270 psxtmrwlock06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf110 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f110
=>  Loading section .data, size 0x2e0 lma 40011a40
=>  Start address 40000000
=>  Transfer rate: 500480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 910/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:901  W:0    | mipstx39/jmr3904: psxtmrwlock07.exe
Result: invalid   
Time: 0:00:00.532318 psxtmrwlock07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2d0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f2d0
=>  Loading section .data, size 0x2e0 lma 40023b80
=>  Start address 40000000
=>  Transfer rate: 504064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmrwlock07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 911/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:909  W:0    | mipstx39/jmr3904: psxtmsem01.exe
Result: invalid   
Time: 0:00:00.510976 psxtmsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf4c0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f4c0
=>  Loading section .data, size 0x310 lma 40011b80
=>  Start address 40000000
=>  Transfer rate: 508416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 912/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:909  W:0    | mipstx39/jmr3904: psxtmsem02.exe
Result: invalid   
Time: 0:00:00.508176 psxtmsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf350 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f350
=>  Loading section .data, size 0x2e0 lma 40011980
=>  Start address 40000000
=>  Transfer rate: 505088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 913/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:909  W:0    | mipstx39/jmr3904: psxtmsem03.exe
Result: invalid   
Time: 0:00:00.505916 psxtmsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf040 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f040
=>  Loading section .data, size 0x2e0 lma 40023900
=>  Start address 40000000
=>  Transfer rate: 498816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 914/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:909  W:0    | mipstx39/jmr3904: psxtmsem04.exe
Result: invalid   
Time: 0:00:00.554609 psxtmsem04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf160 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f160
=>  Loading section .data, size 0x2e0 lma 40011a80
=>  Start address 40000000
=>  Transfer rate: 501120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 915/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:909  W:0    | mipstx39/jmr3904: psxtmsem05.exe
Result: invalid   
Time: 0:00:00.576465 psxtmsem05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf330 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f330
=>  Loading section .data, size 0x2e0 lma 40023bc0
=>  Start address 40000000
=>  Transfer rate: 504832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsem05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 916/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:909  W:0    | mipstx39/jmr3904: psxtmsleep01.exe
Result: invalid   
Time: 0:00:00.526467 psxtmsleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsleep01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2d0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f2d0
=>  Loading section .data, size 0x2f0 lma 40011900
=>  Start address 40000000
=>  Transfer rate: 504192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 917/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:909  W:0    | mipstx39/jmr3904: psxtmsleep02.exe
Result: invalid   
Time: 0:00:00.524263 psxtmsleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsleep02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf3f0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f3f0
=>  Loading section .data, size 0x2f0 lma 40023c80
=>  Start address 40000000
=>  Transfer rate: 506496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmsleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 918/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:909  W:0    | mipstx39/jmr3904: psxtmthread01.exe
Result: invalid   
Time: 0:00:00.509248 psxtmthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xec10 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ec10
=>  Loading section .data, size 0x2e0 lma 400234c0
=>  Start address 40000000
=>  Transfer rate: 490240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 919/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:912  W:0    | mipstx39/jmr3904: psxtmthread02.exe
Result: invalid   
Time: 0:00:00.519492 psxtmthread02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xecc0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ecc0
=>  Loading section .data, size 0x2e0 lma 40011600
=>  Start address 40000000
=>  Transfer rate: 491648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 920/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:916  W:0    | mipstx39/jmr3904: psxtmthread03.exe
Result: invalid   
Time: 0:00:00.523540 psxtmthread03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xebd0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ebd0
=>  Loading section .data, size 0x2e0 lma 40023480
=>  Start address 40000000
=>  Transfer rate: 489728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 921/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:916  W:0    | mipstx39/jmr3904: psxtmthread04.exe
Result: invalid   
Time: 0:00:00.256912 psxtmthread04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeeb0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eeb0
=>  Loading section .data, size 0x2e0 lma 40011500
=>  Start address 40000000
=>  Transfer rate: 495616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 922/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:917  W:0    | mipstx39/jmr3904: psxtmthread05.exe
Result: invalid   
Time: 0:00:00.507760 psxtmthread05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeed0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eed0
=>  Loading section .data, size 0x2e0 lma 40011800
=>  Start address 40000000
=>  Transfer rate: 495872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 923/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:916  W:0    | mipstx39/jmr3904: psxtmthread06.exe
Result: invalid   
Time: 0:00:00.534856 psxtmthread06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeed0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eed0
=>  Loading section .data, size 0x2e0 lma 40011800
=>  Start address 40000000
=>  Transfer rate: 495872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthread06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 924/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:916  W:0    | mipstx39/jmr3904: psxtmthreadattr01.exe
Result: invalid   
Time: 0:00:00.533286 psxtmthreadattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthreadattr01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthreadattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf750 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f750
=>  Loading section .data, size 0x2e0 lma 40011d80
=>  Start address 40000000
=>  Transfer rate: 513280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/psxtmtests/psxtmthreadattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 925/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:916  W:0    | mipstx39/jmr3904: rhdeadlockbrk.exe
Result: invalid   
Time: 0:00:00.518521 rhdeadlockbrk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/rhealstone/rhdeadlockbrk.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/rhealstone/rhdeadlockbrk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10500 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40010500
=>  Loading section .data, size 0x310 lma 40013440
=>  Start address 40000000
=>  Transfer rate: 541696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/rhealstone/rhdeadlockbrk.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 926/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:918  W:0    | mipstx39/jmr3904: rhilatency.exe
Result: invalid   
Time: 0:00:00.251138 rhilatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/rhealstone/rhilatency.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/rhealstone/rhilatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xec40 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ec40
=>  Loading section .data, size 0x2e0 lma 40011580
=>  Start address 40000000
=>  Transfer rate: 490624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/rhealstone/rhilatency.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 927/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:920  W:0    | mipstx39/jmr3904: rhmlatency.exe
Result: invalid   
Time: 0:00:00.257700 rhmlatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/rhealstone/rhmlatency.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/rhealstone/rhmlatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf730 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f730
=>  Loading section .data, size 0x310 lma 40012380
=>  Start address 40000000
=>  Transfer rate: 513408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/rhealstone/rhmlatency.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 928/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:921  W:0    | mipstx39/jmr3904: rhsemshuffle.exe
Result: invalid   
Time: 0:00:00.252330 rhsemshuffle.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/rhealstone/rhsemshuffle.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/rhealstone/rhsemshuffle.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ed0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010ed0
=>  Loading section .data, size 0x340 lma 40013b40
=>  Start address 40000000
=>  Transfer rate: 562304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/rhealstone/rhsemshuffle.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 929/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:924  W:0    | mipstx39/jmr3904: rhtaskpreempt.exe
Result: invalid   
Time: 0:00:00.288438 rhtaskpreempt.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/rhealstone/rhtaskpreempt.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/rhealstone/rhtaskpreempt.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeb30 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eb30
=>  Loading section .data, size 0x2e0 lma 40011740
=>  Start address 40000000
=>  Transfer rate: 488448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/rhealstone/rhtaskpreempt.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 930/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:924  W:0    | mipstx39/jmr3904: rhtaskswitch.exe
Result: invalid   
Time: 0:00:00.280898 rhtaskswitch.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/rhealstone/rhtaskswitch.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/rhealstone/rhtaskswitch.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xea60 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ea60
=>  Loading section .data, size 0x2e0 lma 40011680
=>  Start address 40000000
=>  Transfer rate: 486784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/rhealstone/rhtaskswitch.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 931/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:925  W:0    | mipstx39/jmr3904: base_sp.exe
Result: invalid   
Time: 0:00:00.277885 base_sp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/base_sp.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/base_sp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf7b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f7b0
=>  Loading section .data, size 0x310 lma 40012100
=>  Start address 40000000
=>  Transfer rate: 514560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/base_sp.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 932/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:927  W:0    | mipstx39/jmr3904: capture.exe
Result: invalid   
Time: 0:00:00.521394 capture.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/capture.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/capture.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2d790 lma 40000000
=>  Loading section .tdata, size 0xc lma 4002d790
=>  Loading section .rtemsroset, size 0x80 lma 4002d7a0
=>  Loading section .data, size 0x880 lma 40034040
=>  Start address 40000000
=>  Transfer rate: 1508576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/capture.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 933/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:927  W:0    | mipstx39/jmr3904: cdtest.exe
Result: invalid   
Time: 0:00:00.761638 cdtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/cdtest.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/cdtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2e9c0 lma 40000000
=>  Loading section .tdata, size 0xc lma 4002e9c0
=>  Loading section .rtemsroset, size 0x80 lma 4002e9d0
=>  Loading section .data, size 0x640 lma 40031040
=>  Start address 40000000
=>  Transfer rate: 1541216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/cdtest.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 934/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:927  W:0    | mipstx39/jmr3904: fileio.exe
Result: invalid   
Time: 0:00:00.509908 fileio.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/fileio.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/fileio.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x830e0 lma 40000000
=>  Loading section .tdata, size 0x14 lma 400830e0
=>  Loading section .rtemsroset, size 0x88 lma 400830f8
=>  Loading section .data, size 0x13c0 lma 40089d40
=>  Start address 40000000
=>  Transfer rate: 4336096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/fileio.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 935/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:928  W:0    | mipstx39/jmr3904: hello.exe
Result: invalid   
Time: 0:00:00.784551 hello.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/hello.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/hello.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15910 lma 40000000
=>  Loading section .tdata, size 0xc lma 40015910
=>  Loading section .rtemsroset, size 0x70 lma 40015920
=>  Loading section .data, size 0x480 lma 40017f80
=>  Start address 40000000
=>  Transfer rate: 716896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/hello.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 936/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:930  W:0    | mipstx39/jmr3904: iostream.exe
Result: invalid   
Time: 0:00:00.524422 iostream.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/iostream.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/iostream.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9dd90 lma 40000000
=>  Loading section .tdata, size 0xc lma 4009dd90
=>  Loading section .rtemsroset, size 0x80 lma 4009dda0
=>  Loading section .data, size 0x22a0 lma 400a0400
=>  Start address 40000000
=>  Transfer rate: 5244384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/iostream.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 937/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:930  W:0    | mipstx39/jmr3904: minimum.exe
[ 938/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:930  W:0    | mipstx39/jmr3904: nsecs.exe
Result: invalid   
Time: 0:00:00.503999 nsecs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/nsecs.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/nsecs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16b00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40016b00
=>  Loading section .data, size 0x510 lma 40019140
=>  Start address 40000000
=>  Transfer rate: 754816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/nsecs.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 939/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:930  W:0    | mipstx39/jmr3904: paranoia.exe
Result: invalid   
Time: 0:00:00.597778 paranoia.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/paranoia.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/paranoia.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22b90 lma 40000000
=>  Loading section .tdata, size 0xc lma 40022b90
=>  Loading section .rtemsroset, size 0x80 lma 40022ba0
=>  Loading section .data, size 0x630 lma 40025200
=>  Start address 40000000
=>  Transfer rate: 1151584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/paranoia.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 940/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:933  W:0    | mipstx39/jmr3904: ticker.exe
Result: invalid   
Time: 0:00:00.327324 ticker.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/ticker.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/ticker.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10540 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010540
=>  Loading section .data, size 0x4b0 lma 40013440
=>  Start address 40000000
=>  Transfer rate: 545664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/ticker.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 941/1855] p:1    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:932  W:0    | mipstx39/jmr3904: unlimited.exe
Result: invalid   
Time: 0:00:00.253479 unlimited.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/samples/unlimited.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/samples/unlimited.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b50 lma 40000000
=>  Loading section .tdata, size 0xc lma 40010b50
=>  Loading section .rtemsroset, size 0x70 lma 40010b60
=>  Loading section .data, size 0x2f0 lma 40013d40
=>  Start address 40000000
=>  Transfer rate: 554464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/samples/unlimited.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 942/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:937  W:0    | mipstx39/jmr3904: sp01.exe
Result: invalid   
Time: 0:00:00.531850 sp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xba80 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ba80
=>  Loading section .data, size 0x200 lma 40010a00
=>  Start address 40000000
=>  Transfer rate: 386944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 943/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:937  W:0    | mipstx39/jmr3904: sp02.exe
Result: invalid   
Time: 0:00:00.503828 sp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ef0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010ef0
=>  Loading section .data, size 0x310 lma 40014e00
=>  Start address 40000000
=>  Transfer rate: 562176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 944/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:937  W:0    | mipstx39/jmr3904: sp03.exe
Result: invalid   
Time: 0:00:00.519613 sp03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10930 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010930
=>  Loading section .data, size 0x330 lma 40013540
=>  Start address 40000000
=>  Transfer rate: 550656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 945/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:939  W:0    | mipstx39/jmr3904: sp04.exe
Result: invalid   
Time: 0:00:00.540132 sp04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011f60
=>  Loading section .data, size 0x500 lma 40014f00
=>  Start address 40000000
=>  Transfer rate: 599808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 946/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:937  W:0    | mipstx39/jmr3904: sp05.exe
Result: invalid   
Time: 0:00:00.557623 sp05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400102e0
=>  Loading section .data, size 0x310 lma 400131c0
=>  Start address 40000000
=>  Transfer rate: 537472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 947/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:938  W:0    | mipstx39/jmr3904: sp06.exe
Result: invalid   
Time: 0:00:00.526818 sp06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400100f0
=>  Loading section .data, size 0x310 lma 40013000
=>  Start address 40000000
=>  Transfer rate: 533504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 948/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:939  W:0    | mipstx39/jmr3904: sp07.exe
Result: invalid   
Time: 0:00:00.507660 sp07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11e90 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011e90
=>  Loading section .data, size 0x4e0 lma 40015140
=>  Start address 40000000
=>  Transfer rate: 597888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 949/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:939  W:0    | mipstx39/jmr3904: sp08.exe
Result: invalid   
Time: 0:00:00.555703 sp08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2e0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f2e0
=>  Loading section .data, size 0x2e0 lma 40011940
=>  Start address 40000000
=>  Transfer rate: 504192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 950/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:940  W:0    | mipstx39/jmr3904: sp11.exe
Result: invalid   
Time: 0:00:00.521381 sp11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp11.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15110 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40015110
=>  Loading section .data, size 0x360 lma 40017ec0
=>  Start address 40000000
=>  Transfer rate: 698240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp11.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 951/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:942  W:0    | mipstx39/jmr3904: sp12.exe
Result: invalid   
Time: 0:00:00.290696 sp12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp12.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14400 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014400
=>  Loading section .data, size 0x340 lma 400180c0
=>  Start address 40000000
=>  Transfer rate: 671232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp12.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 952/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:942  W:0    | mipstx39/jmr3904: sp13.exe
Result: invalid   
Time: 0:00:00.269081 sp13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp13.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x145f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400145f0
=>  Loading section .data, size 0x340 lma 40017800
=>  Start address 40000000
=>  Transfer rate: 675200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp13.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 953/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:946  W:0    | mipstx39/jmr3904: sp14.exe
Result: invalid   
Time: 0:00:00.260845 sp14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp14.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b90 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010b90
=>  Loading section .data, size 0x340 lma 40013800
=>  Start address 40000000
=>  Transfer rate: 555648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp14.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 954/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:949  W:0    | mipstx39/jmr3904: sp15.exe
Result: invalid   
Time: 0:00:00.511125 sp15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp15.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10430 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010430
=>  Loading section .data, size 0x340 lma 40012dc0
=>  Start address 40000000
=>  Transfer rate: 540544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp15.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 955/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:949  W:0    | mipstx39/jmr3904: sp16.exe
Result: invalid   
Time: 0:00:00.519043 sp16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp16.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x136c0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400136c0
=>  Loading section .data, size 0x340 lma 40016800
=>  Start address 40000000
=>  Transfer rate: 644096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp16.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 956/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:949  W:0    | mipstx39/jmr3904: sp17.exe
Result: invalid   
Time: 0:00:00.275671 sp17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp17.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fe00
=>  Loading section .data, size 0x310 lma 40012a00
=>  Start address 40000000
=>  Transfer rate: 527488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp17.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 957/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:949  W:0    | mipstx39/jmr3904: sp18.exe
Result: invalid   
Time: 0:00:00.552708 sp18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp18.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf260 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f260
=>  Loading section .data, size 0x310 lma 40011c80
=>  Start address 40000000
=>  Transfer rate: 503552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp18.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 958/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:949  W:0    | mipstx39/jmr3904: sp19.exe
Result: invalid   
Time: 0:00:00.266952 sp19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp19.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bc40 lma 40000000
=>  Loading section .tdata, size 0xc lma 4001bc40
=>  Loading section .rtemsroset, size 0x80 lma 4001bc50
=>  Loading section .data, size 0x650 lma 4001f400
=>  Start address 40000000
=>  Transfer rate: 923872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp19.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 959/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:949  W:0    | mipstx39/jmr3904: sp20.exe
Result: invalid   
Time: 0:00:00.552891 sp20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp20.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18210 lma 40000000
=>  Loading section .tdata, size 0xc lma 40018210
=>  Loading section .rtemsroset, size 0x80 lma 40018220
=>  Loading section .data, size 0x4c0 lma 4001c380
=>  Start address 40000000
=>  Transfer rate: 801504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp20.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 960/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:952  W:0    | mipstx39/jmr3904: sp2038.exe
Result: invalid   
Time: 0:00:00.251543 sp2038.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp2038.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp2038.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf240 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f240
=>  Loading section .data, size 0x320 lma 40011880
=>  Start address 40000000
=>  Transfer rate: 503424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp2038.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 961/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:952  W:0    | mipstx39/jmr3904: sp21.exe
Result: invalid   
Time: 0:00:00.266268 sp21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp21.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13d00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013d00
=>  Loading section .data, size 0x360 lma 40016340
=>  Start address 40000000
=>  Transfer rate: 657152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp21.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 962/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:953  W:0    | mipstx39/jmr3904: sp22.exe
Result: invalid   
Time: 0:00:00.272125 sp22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp22.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400113b0
=>  Loading section .data, size 0x360 lma 40013d80
=>  Start address 40000000
=>  Transfer rate: 572544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp22.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 963/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:957  W:0    | mipstx39/jmr3904: sp23.exe
Result: invalid   
Time: 0:00:00.511627 sp23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp23.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fc60
=>  Loading section .data, size 0x340 lma 400125c0
=>  Start address 40000000
=>  Transfer rate: 524544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp23.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 964/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:957  W:0    | mipstx39/jmr3904: sp24.exe
Result: invalid   
Time: 0:00:00.534631 sp24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp24.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a20 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010a20
=>  Loading section .data, size 0x4b0 lma 40013a00
=>  Start address 40000000
=>  Transfer rate: 555648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp24.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 965/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:960  W:0    | mipstx39/jmr3904: sp25.exe
Result: invalid   
Time: 0:00:00.556325 sp25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp25.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x113b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400113b0
=>  Loading section .data, size 0x340 lma 40013d80
=>  Start address 40000000
=>  Transfer rate: 572288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp25.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 966/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:960  W:0    | mipstx39/jmr3904: sp26.exe
Result: invalid   
Time: 0:00:00.282595 sp26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp26.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf870 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f870
=>  Loading section .data, size 0x310 lma 40012a40
=>  Start address 40000000
=>  Transfer rate: 516096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp26.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 967/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:960  W:0    | mipstx39/jmr3904: sp27.exe
Result: invalid   
Time: 0:00:00.254220 sp27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp27.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400103b0
=>  Loading section .data, size 0x340 lma 400138c0
=>  Start address 40000000
=>  Transfer rate: 539520 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp27.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 968/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:960  W:0    | mipstx39/jmr3904: sp27a.exe
Result: invalid   
Time: 0:00:00.516415 sp27a.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp27a.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp27a.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x103b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400103b0
=>  Loading section .data, size 0x340 lma 400138c0
=>  Start address 40000000
=>  Transfer rate: 539520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp27a.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 969/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:960  W:0    | mipstx39/jmr3904: sp29.exe
Result: invalid   
Time: 0:00:00.508951 sp29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp29.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10c30 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010c30
=>  Loading section .data, size 0x340 lma 400135c0
=>  Start address 40000000
=>  Transfer rate: 556928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp29.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 970/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:960  W:0    | mipstx39/jmr3904: sp30.exe
Result: invalid   
Time: 0:00:00.523886 sp30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp30.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400110a0
=>  Loading section .data, size 0x4b0 lma 40014340
=>  Start address 40000000
=>  Transfer rate: 568960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp30.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 971/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:962  W:0    | mipstx39/jmr3904: sp31.exe
Result: invalid   
Time: 0:00:00.258907 sp31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp31.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013b40
=>  Loading section .data, size 0x360 lma 40016800
=>  Start address 40000000
=>  Transfer rate: 653568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp31.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 972/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:962  W:0    | mipstx39/jmr3904: sp32.exe
Result: invalid   
Time: 0:00:00.292619 sp32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp32.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fd00
=>  Loading section .data, size 0x340 lma 40012400
=>  Start address 40000000
=>  Transfer rate: 525824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp32.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 973/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:969  W:0    | mipstx39/jmr3904: sp33.exe
Result: invalid   
Time: 0:00:00.502440 sp33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp33.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010f80
=>  Loading section .data, size 0x340 lma 40014180
=>  Start address 40000000
=>  Transfer rate: 563712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp33.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 974/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:969  W:0    | mipstx39/jmr3904: sp34.exe
Result: invalid   
Time: 0:00:00.526225 sp34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp34.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010a40
=>  Loading section .data, size 0x340 lma 40013f40
=>  Start address 40000000
=>  Transfer rate: 552960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp34.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 975/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:969  W:0    | mipstx39/jmr3904: sp35.exe
Result: invalid   
Time: 0:00:00.503886 sp35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp35.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16ca0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40016ca0
=>  Loading section .data, size 0x4b0 lma 4001af00
=>  Start address 40000000
=>  Transfer rate: 757376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp35.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 976/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:969  W:0    | mipstx39/jmr3904: sp37.exe
Result: invalid   
Time: 0:00:00.261951 sp37.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp37.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp37.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12120 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012120
=>  Loading section .data, size 0x360 lma 40014ac0
=>  Start address 40000000
=>  Transfer rate: 600064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp37.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 977/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:969  W:0    | mipstx39/jmr3904: sp38.exe
Result: invalid   
Time: 0:00:00.511463 sp38.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp38.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp38.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfaa0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000faa0
=>  Loading section .data, size 0x340 lma 40012140
=>  Start address 40000000
=>  Transfer rate: 520960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp38.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 978/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:970  W:0    | mipstx39/jmr3904: sp40.exe
Result: invalid   
Time: 0:00:00.505661 sp40.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp40.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp40.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff30 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000ff30
=>  Loading section .data, size 0x350 lma 40012580
=>  Start address 40000000
=>  Transfer rate: 530432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp40.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 979/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:969  W:0    | mipstx39/jmr3904: sp41.exe
Result: invalid   
Time: 0:00:00.577491 sp41.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp41.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp41.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf020 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f020
=>  Loading section .data, size 0x310 lma 40011680
=>  Start address 40000000
=>  Transfer rate: 499072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp41.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 980/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:970  W:0    | mipstx39/jmr3904: sp42.exe
Result: invalid   
Time: 0:00:00.251370 sp42.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp42.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp42.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b70 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011b70
=>  Loading section .data, size 0x490 lma 40017b80
=>  Start address 40000000
=>  Transfer rate: 590848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp42.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 981/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:973  W:0    | mipstx39/jmr3904: sp43.exe
Result: invalid   
Time: 0:00:00.252006 sp43.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp43.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp43.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12b80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012b80
=>  Loading section .data, size 0x370 lma 40015580
=>  Start address 40000000
=>  Transfer rate: 621440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp43.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 982/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:973  W:0    | mipstx39/jmr3904: sp44.exe
Result: invalid   
Time: 0:00:00.253593 sp44.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp44.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp44.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fa00
=>  Loading section .data, size 0x310 lma 40012600
=>  Start address 40000000
=>  Transfer rate: 519296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp44.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 983/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:980  W:0    | mipstx39/jmr3904: sp45.exe
Result: invalid   
Time: 0:00:00.506862 sp45.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp45.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp45.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xff60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000ff60
=>  Loading section .data, size 0x340 lma 40012940
=>  Start address 40000000
=>  Transfer rate: 530688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp45.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 984/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:980  W:0    | mipstx39/jmr3904: sp46.exe
Result: invalid   
Time: 0:00:00.505764 sp46.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp46.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp46.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfde0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fde0
=>  Loading section .data, size 0x340 lma 400127c0
=>  Start address 40000000
=>  Transfer rate: 527616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp46.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 985/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:980  W:0    | mipstx39/jmr3904: sp47.exe
Result: invalid   
Time: 0:00:00.259664 sp47.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp47.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp47.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf240 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f240
=>  Loading section .data, size 0x310 lma 4001cdc0
=>  Start address 40000000
=>  Transfer rate: 503424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp47.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 986/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:980  W:0    | mipstx39/jmr3904: sp48.exe
Result: invalid   
Time: 0:00:00.535503 sp48.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp48.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp48.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf690 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f690
=>  Loading section .data, size 0x310 lma 40011e00
=>  Start address 40000000
=>  Transfer rate: 512128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp48.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 987/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:980  W:0    | mipstx39/jmr3904: sp49.exe
Result: invalid   
Time: 0:00:00.506468 sp49.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp49.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp49.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xee80 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ee80
=>  Loading section .data, size 0x310 lma 40011500
=>  Start address 40000000
=>  Transfer rate: 495616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp49.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 988/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:980  W:0    | mipstx39/jmr3904: sp50.exe
Result: invalid   
Time: 0:00:00.273823 sp50.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp50.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp50.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fc80
=>  Loading section .data, size 0x340 lma 40012600
=>  Start address 40000000
=>  Transfer rate: 524800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp50.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 989/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:980  W:0    | mipstx39/jmr3904: sp51.exe
Result: invalid   
Time: 0:00:00.255979 sp51.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp51.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp51.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfcb0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fcb0
=>  Loading section .data, size 0x310 lma 40012340
=>  Start address 40000000
=>  Transfer rate: 524672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp51.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 990/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:980  W:0    | mipstx39/jmr3904: sp52.exe
Result: invalid   
Time: 0:00:00.254490 sp52.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp52.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp52.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xffd0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000ffd0
=>  Loading section .data, size 0x360 lma 40012940
=>  Start address 40000000
=>  Transfer rate: 531840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp52.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 991/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:982  W:0    | mipstx39/jmr3904: sp53.exe
Result: invalid   
Time: 0:00:00.503917 sp53.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp53.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp53.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10410 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010410
=>  Loading section .data, size 0x360 lma 40012d80
=>  Start address 40000000
=>  Transfer rate: 540544 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp53.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 992/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:983  W:0    | mipstx39/jmr3904: sp54.exe
Result: invalid   
Time: 0:00:00.252080 sp54.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp54.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp54.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe760 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e760
=>  Loading section .data, size 0x420 lma 40010ac0
=>  Start address 40000000
=>  Transfer rate: 483200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp54.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 993/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:989  W:0    | mipstx39/jmr3904: sp55.exe
Result: invalid   
Time: 0:00:00.506323 sp55.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp55.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp55.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf540 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f540
=>  Loading section .data, size 0x310 lma 40011bc0
=>  Start address 40000000
=>  Transfer rate: 509440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp55.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 994/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:989  W:0    | mipstx39/jmr3904: sp56.exe
Result: invalid   
Time: 0:00:00.510039 sp56.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp56.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp56.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe9c0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e9c0
=>  Loading section .data, size 0x330 lma 40011340
=>  Start address 40000000
=>  Transfer rate: 486144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp56.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 995/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:989  W:0    | mipstx39/jmr3904: sp57.exe
Result: invalid   
Time: 0:00:00.506328 sp57.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp57.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp57.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf970 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f970
=>  Loading section .data, size 0x310 lma 400122c0
=>  Start address 40000000
=>  Transfer rate: 518144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp57.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 996/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:989  W:0    | mipstx39/jmr3904: sp58.exe
Result: invalid   
Time: 0:00:00.505947 sp58.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp58.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp58.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe3b0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e3b0
=>  Loading section .data, size 0x2e0 lma 40010a00
=>  Start address 40000000
=>  Transfer rate: 473088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp58.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 997/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:989  W:0    | mipstx39/jmr3904: sp59.exe
Result: invalid   
Time: 0:00:00.510758 sp59.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp59.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp59.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10310 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010310
=>  Loading section .data, size 0x340 lma 40012cc0
=>  Start address 40000000
=>  Transfer rate: 538240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp59.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 998/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:989  W:0    | mipstx39/jmr3904: sp60.exe
Result: invalid   
Time: 0:00:00.507278 sp60.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp60.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp60.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fc40
=>  Loading section .data, size 0x340 lma 40012400
=>  Start address 40000000
=>  Transfer rate: 524288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp60.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[ 999/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:989  W:0    | mipstx39/jmr3904: sp62.exe
Result: invalid   
Time: 0:00:00.506845 sp62.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp62.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp62.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10b80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010b80
=>  Loading section .data, size 0x350 lma 40013540
=>  Start address 40000000
=>  Transfer rate: 555648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp62.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1000/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:990  W:0    | mipstx39/jmr3904: sp63.exe
Result: invalid   
Time: 0:00:00.253861 sp63.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp63.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp63.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe640 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e640
=>  Loading section .data, size 0x2e0 lma 40010c80
=>  Start address 40000000
=>  Transfer rate: 478336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp63.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1001/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:998  W:0    | mipstx39/jmr3904: sp64.exe
Result: invalid   
Time: 0:00:00.507378 sp64.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp64.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp64.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf670 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f670
=>  Loading section .data, size 0x340 lma 40011dc0
=>  Start address 40000000
=>  Transfer rate: 512256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp64.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1002/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:998  W:0    | mipstx39/jmr3904: sp65.exe
Result: invalid   
Time: 0:00:00.296864 sp65.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp65.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp65.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400110b0
=>  Loading section .data, size 0x350 lma 40013a40
=>  Start address 40000000
=>  Transfer rate: 566272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp65.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1003/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:998  W:0    | mipstx39/jmr3904: sp66.exe
Result: invalid   
Time: 0:00:00.571279 sp66.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp66.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp66.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400110b0
=>  Loading section .data, size 0x350 lma 40013a40
=>  Start address 40000000
=>  Transfer rate: 566272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp66.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1004/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:998  W:0    | mipstx39/jmr3904: sp67.exe
Result: invalid   
Time: 0:00:00.531191 sp67.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp67.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp67.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc90 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fc90
=>  Loading section .data, size 0x340 lma 40012640
=>  Start address 40000000
=>  Transfer rate: 524928 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp67.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1005/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:998  W:0    | mipstx39/jmr3904: sp68.exe
Result: invalid   
Time: 0:00:00.557963 sp68.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp68.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp68.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c20 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40012c20
=>  Loading section .data, size 0x400 lma 40015880
=>  Start address 40000000
=>  Transfer rate: 624000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp68.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1006/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:998  W:0    | mipstx39/jmr3904: sp69.exe
Result: invalid   
Time: 0:00:00.598739 sp69.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp69.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp69.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400107a0
=>  Loading section .data, size 0x340 lma 40012ec0
=>  Start address 40000000
=>  Transfer rate: 547584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp69.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1007/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:998  W:0    | mipstx39/jmr3904: sp70.exe
Result: invalid   
Time: 0:00:00.504221 sp70.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp70.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp70.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc30 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fc30
=>  Loading section .data, size 0x310 lma 40012280
=>  Start address 40000000
=>  Transfer rate: 523776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp70.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1008/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:998  W:0    | mipstx39/jmr3904: sp71.exe
Result: invalid   
Time: 0:00:00.287901 sp71.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp71.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp71.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xec10 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ec10
=>  Loading section .data, size 0x310 lma 40047d40
=>  Start address 40000000
=>  Transfer rate: 490624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp71.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1009/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1001 W:0    | mipstx39/jmr3904: sp72.exe
Result: invalid   
Time: 0:00:00.254305 sp72.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp72.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp72.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10420 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010420
=>  Loading section .data, size 0x340 lma 40012d80
=>  Start address 40000000
=>  Transfer rate: 540416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp72.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1010/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1001 W:0    | mipstx39/jmr3904: sp73.exe
Result: invalid   
Time: 0:00:00.252272 sp73.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp73.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp73.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400100d0
=>  Loading section .data, size 0x330 lma 40012f40
=>  Start address 40000000
=>  Transfer rate: 533504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp73.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1011/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1001 W:0    | mipstx39/jmr3904: sp74.exe
Result: invalid   
Time: 0:00:00.263854 sp74.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp74.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp74.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe7a0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e7a0
=>  Loading section .data, size 0x2e0 lma 400113c0
=>  Start address 40000000
=>  Transfer rate: 481152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp74.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1012/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1008 W:0    | mipstx39/jmr3904: sp75.exe
Result: invalid   
Time: 0:00:00.254420 sp75.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp75.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp75.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe20 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fe20
=>  Loading section .data, size 0x340 lma 400124c0
=>  Start address 40000000
=>  Transfer rate: 528128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp75.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1013/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1008 W:0    | mipstx39/jmr3904: sp76.exe
Result: invalid   
Time: 0:00:00.258600 sp76.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp76.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp76.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf140 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f140
=>  Loading section .data, size 0x2e0 lma 40011d40
=>  Start address 40000000
=>  Transfer rate: 500864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp76.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1014/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1009 W:0    | mipstx39/jmr3904: sp77.exe
Result: invalid   
Time: 0:00:00.509580 sp77.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sp77.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sp77.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf7a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f7a0
=>  Loading section .data, size 0x340 lma 40011e40
=>  Start address 40000000
=>  Transfer rate: 514816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sp77.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1015/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1009 W:0    | mipstx39/jmr3904: spassoc01.exe
Result: invalid   
Time: 0:00:00.513087 spassoc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spassoc01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spassoc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10310 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010310
=>  Loading section .data, size 0x330 lma 40012980
=>  Start address 40000000
=>  Transfer rate: 538112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spassoc01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1016/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1009 W:0    | mipstx39/jmr3904: spatomic01.exe
Result: invalid   
Time: 0:00:00.519199 spatomic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spatomic01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spatomic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xec00 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ec00
=>  Loading section .data, size 0x2e0 lma 40011240
=>  Start address 40000000
=>  Transfer rate: 490112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spatomic01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1017/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1009 W:0    | mipstx39/jmr3904: spcache01.exe
Result: invalid   
Time: 0:00:00.522140 spcache01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spcache01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spcache01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11620 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011620
=>  Loading section .data, size 0x310 lma 40013c80
=>  Start address 40000000
=>  Transfer rate: 576896 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spcache01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1018/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1009 W:0    | mipstx39/jmr3904: spcbssched01.exe
Result: invalid   
Time: 0:00:00.268082 spcbssched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spcbssched01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spcbssched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10790 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010790
=>  Loading section .data, size 0x4b0 lma 400136c0
=>  Start address 40000000
=>  Transfer rate: 550400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spcbssched01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1019/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1009 W:0    | mipstx39/jmr3904: spcbssched02.exe
Result: invalid   
Time: 0:00:00.511420 spcbssched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spcbssched02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spcbssched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x127d0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400127d0
=>  Loading section .rtemsroset, size 0x80 lma 400127e0
=>  Loading section .data, size 0x350 lma 40015b00
=>  Start address 40000000
=>  Transfer rate: 613728 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spcbssched02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1020/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1011 W:0    | mipstx39/jmr3904: spcbssched03.exe
Result: invalid   
Time: 0:00:00.542948 spcbssched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spcbssched03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spcbssched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11e00 lma 40000000
=>  Loading section .tdata, size 0xc lma 40011e00
=>  Loading section .rtemsroset, size 0x80 lma 40011e10
=>  Loading section .data, size 0x3b0 lma 40015cc0
=>  Start address 40000000
=>  Transfer rate: 594400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spcbssched03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1021/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1011 W:0    | mipstx39/jmr3904: spchain.exe
Result: invalid   
Time: 0:00:00.253460 spchain.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spchain.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spchain.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a50 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010a50
=>  Loading section .data, size 0x330 lma 400130c0
=>  Start address 40000000
=>  Transfer rate: 552960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spchain.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1022/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1014 W:0    | mipstx39/jmr3904: spclock_err01.exe
Result: invalid   
Time: 0:00:00.258190 spclock_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spclock_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spclock_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10dd0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010dd0
=>  Loading section .data, size 0x330 lma 40014e00
=>  Start address 40000000
=>  Transfer rate: 560128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spclock_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1023/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1015 W:0    | mipstx39/jmr3904: spclock_err02.exe
Result: invalid   
Time: 0:00:00.254256 spclock_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spclock_err02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spclock_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10680 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010680
=>  Loading section .data, size 0x330 lma 40012cc0
=>  Start address 40000000
=>  Transfer rate: 545152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spclock_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1024/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1015 W:0    | mipstx39/jmr3904: spclock_todhook01.exe
Result: invalid   
Time: 0:00:00.273059 spclock_todhook01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spclock_todhook01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spclock_todhook01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14e80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014e80
=>  Loading section .data, size 0x690 lma 400174c0
=>  Start address 40000000
=>  Transfer rate: 699520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spclock_todhook01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1025/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1015 W:0    | mipstx39/jmr3904: spconfig01.exe
Result: invalid   
Time: 0:00:00.278884 spconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spconfig01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe0a0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e0a0
=>  Loading section .data, size 0x370 lma 40011700
=>  Start address 40000000
=>  Transfer rate: 467968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1026/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1023 W:0    | mipstx39/jmr3904: spconfig02.exe
Result: invalid   
Time: 0:00:00.505624 spconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spconfig02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xbbd0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000bbd0
=>  Loading section .data, size 0x330 lma 4000e240
=>  Start address 40000000
=>  Transfer rate: 392192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1027/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1023 W:0    | mipstx39/jmr3904: spconsole01.exe
Result: invalid   
Time: 0:00:00.503044 spconsole01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spconsole01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spconsole01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bd50 lma 40000000
=>  Loading section .tdata, size 0xc lma 4001bd50
=>  Loading section .rtemsroset, size 0x80 lma 4001bd60
=>  Loading section .data, size 0x4e0 lma 4001e9c0
=>  Start address 40000000
=>  Transfer rate: 923104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spconsole01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1028/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1022 W:0    | mipstx39/jmr3904: spcontext01.exe
Result: invalid   
Time: 0:00:00.256612 spcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spcontext01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010a80
=>  Loading section .data, size 0x340 lma 400139c0
=>  Start address 40000000
=>  Transfer rate: 553472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1029/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1023 W:0    | mipstx39/jmr3904: spcpucounter01.exe
Result: invalid   
Time: 0:00:00.538995 spcpucounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spcpucounter01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spcpucounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16f90 lma 40000000
=>  Loading section .tdata, size 0xc lma 40016f90
=>  Loading section .rtemsroset, size 0x80 lma 40016fa0
=>  Loading section .data, size 0x4b0 lma 40019600
=>  Start address 40000000
=>  Transfer rate: 763488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spcpucounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1030/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1023 W:0    | mipstx39/jmr3904: spcpuset01.exe
Result: invalid   
Time: 0:00:00.515325 spcpuset01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spcpuset01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spcpuset01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe900 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e900
=>  Loading section .data, size 0x2e0 lma 40010f40
=>  Start address 40000000
=>  Transfer rate: 483968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spcpuset01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1031/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1023 W:0    | mipstx39/jmr3904: spcxx01.exe
Result: invalid   
Time: 0:00:00.504384 spcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spcxx01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x33a80 lma 40000000
=>  Loading section .tdata, size 0xc lma 40033a80
=>  Loading section .rtemsroset, size 0x90 lma 40033a90
=>  Loading section .data, size 0x7f0 lma 400363c0
=>  Start address 40000000
=>  Transfer rate: 1710176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1032/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1023 W:0    | mipstx39/jmr3904: spedfsched01.exe
Result: invalid   
Time: 0:00:00.543673 spedfsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spedfsched01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spedfsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10650 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010650
=>  Loading section .data, size 0x4b0 lma 40013540
=>  Start address 40000000
=>  Transfer rate: 547840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spedfsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1033/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1023 W:0    | mipstx39/jmr3904: spedfsched02.exe
Result: invalid   
Time: 0:00:00.518727 spedfsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spedfsched02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spedfsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11990 lma 40000000
=>  Loading section .tdata, size 0xc lma 40011990
=>  Loading section .rtemsroset, size 0x80 lma 400119a0
=>  Loading section .data, size 0x3a0 lma 40015800
=>  Start address 40000000
=>  Transfer rate: 585184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spedfsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1034/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1024 W:0    | mipstx39/jmr3904: spedfsched03.exe
Result: invalid   
Time: 0:00:00.274225 spedfsched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spedfsched03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spedfsched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11390 lma 40000000
=>  Loading section .tdata, size 0xc lma 40011390
=>  Loading section .rtemsroset, size 0x80 lma 400113a0
=>  Loading section .data, size 0x3b0 lma 40015200
=>  Start address 40000000
=>  Transfer rate: 573024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spedfsched03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1035/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1029 W:0    | mipstx39/jmr3904: spedfsched04.exe
Result: invalid   
Time: 0:00:00.568413 spedfsched04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spedfsched04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spedfsched04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10490 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010490
=>  Loading section .data, size 0x340 lma 40013200
=>  Start address 40000000
=>  Transfer rate: 541312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spedfsched04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1036/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1031 W:0    | mipstx39/jmr3904: sperror01.exe
Result: invalid   
Time: 0:00:00.556315 sperror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sperror01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sperror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x185e0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400185e0
=>  Loading section .rtemsroset, size 0x80 lma 400185f0
=>  Loading section .data, size 0x490 lma 4001ac40
=>  Start address 40000000
=>  Transfer rate: 808928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sperror01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1037/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1032 W:0    | mipstx39/jmr3904: sperror02.exe
Result: invalid   
Time: 0:00:00.508303 sperror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sperror02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sperror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x184c0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400184c0
=>  Loading section .rtemsroset, size 0x80 lma 400184d0
=>  Loading section .data, size 0x490 lma 4001ab40
=>  Start address 40000000
=>  Transfer rate: 806624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sperror02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1038/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1030 W:0    | mipstx39/jmr3904: sperror03.exe
Result: invalid   
Time: 0:00:00.259089 sperror03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sperror03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sperror03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xecb0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000ecb0
=>  Loading section .data, size 0x310 lma 40011300
=>  Start address 40000000
=>  Transfer rate: 492032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sperror03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1039/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1029 W:0    | mipstx39/jmr3904: spevent_err03.exe
Result: invalid   
Time: 0:00:00.551065 spevent_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spevent_err03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spevent_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x166d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400166d0
=>  Loading section .data, size 0x500 lma 4001a700
=>  Start address 40000000
=>  Transfer rate: 746112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spevent_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1040/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1032 W:0    | mipstx39/jmr3904: speventsystem01.exe
Result: invalid   
Time: 0:00:00.513538 speventsystem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/speventsystem01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/speventsystem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf310 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f310
=>  Loading section .data, size 0x310 lma 40011c40
=>  Start address 40000000
=>  Transfer rate: 505088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/speventsystem01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1041/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1032 W:0    | mipstx39/jmr3904: speventtransient01.exe
Result: invalid   
Time: 0:00:00.265808 speventtransient01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/speventtransient01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/speventtransient01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf250 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f250
=>  Loading section .data, size 0x310 lma 40011b80
=>  Start address 40000000
=>  Transfer rate: 503552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/speventtransient01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1042/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1033 W:0    | mipstx39/jmr3904: spextensions01.exe
Result: invalid   
Time: 0:00:00.259728 spextensions01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spextensions01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spextensions01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ec0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010ec0
=>  Loading section .data, size 0x340 lma 40013980
=>  Start address 40000000
=>  Transfer rate: 562176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spextensions01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1043/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1033 W:0    | mipstx39/jmr3904: spfatal01.exe
Result: invalid   
Time: 0:00:00.275137 spfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf1c0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f1c0
=>  Loading section .data, size 0x310 lma 40011800
=>  Start address 40000000
=>  Transfer rate: 502272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1044/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1039 W:0    | mipstx39/jmr3904: spfatal03.exe
Result: invalid   
Time: 0:00:00.756087 spfatal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10090 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010090
=>  Loading section .data, size 0x340 lma 40012900
=>  Start address 40000000
=>  Transfer rate: 533120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1045/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1039 W:0    | mipstx39/jmr3904: spfatal04.exe
Result: invalid   
Time: 0:00:00.507707 spfatal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f2d0
=>  Loading section .data, size 0x310 lma 40011940
=>  Start address 40000000
=>  Transfer rate: 504576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1046/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1041 W:0    | mipstx39/jmr3904: spfatal05.exe
Result: invalid   
Time: 0:00:00.773705 spfatal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf680 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f680
=>  Loading section .data, size 0x310 lma 40011fc0
=>  Start address 40000000
=>  Transfer rate: 512128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1047/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1041 W:0    | mipstx39/jmr3904: spfatal09.exe
Result: invalid   
Time: 0:00:00.758891 spfatal09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal09.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf320 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f320
=>  Loading section .data, size 0x310 lma 40011980
=>  Start address 40000000
=>  Transfer rate: 505216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal09.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1048/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1041 W:0    | mipstx39/jmr3904: spfatal10.exe
Result: invalid   
Time: 0:00:00.785512 spfatal10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal10.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef20 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000ef20
=>  Loading section .data, size 0x310 lma 40011580
=>  Start address 40000000
=>  Transfer rate: 497024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal10.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1049/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1041 W:0    | mipstx39/jmr3904: spfatal11.exe
Result: invalid   
Time: 0:00:00.527138 spfatal11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal11.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeef0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000eef0
=>  Loading section .data, size 0x310 lma 40011540
=>  Start address 40000000
=>  Transfer rate: 496640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal11.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1050/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1041 W:0    | mipstx39/jmr3904: spfatal12.exe
Result: invalid   
Time: 0:00:00.771189 spfatal12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal12.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf340 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f340
=>  Loading section .data, size 0x310 lma 40011980
=>  Start address 40000000
=>  Transfer rate: 505472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal12.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1051/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1041 W:0    | mipstx39/jmr3904: spfatal14.exe
Result: invalid   
Time: 0:00:00.502016 spfatal14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal14.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f2e0
=>  Loading section .data, size 0x310 lma 40011940
=>  Start address 40000000
=>  Transfer rate: 504704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal14.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1052/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1042 W:0    | mipstx39/jmr3904: spfatal15.exe
Result: invalid   
Time: 0:00:00.541901 spfatal15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal15.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f2e0
=>  Loading section .data, size 0x310 lma 40011940
=>  Start address 40000000
=>  Transfer rate: 504704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal15.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1053/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1045 W:0    | mipstx39/jmr3904: spfatal26.exe
Result: invalid   
Time: 0:00:00.254329 spfatal26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal26.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x8f50 lma 40000000
=>  Loading section .rtemsroset, size 0x60 lma 40008f50
=>  Loading section .data, size 0x1b0 lma 4000b580
=>  Start address 40000000
=>  Transfer rate: 297728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal26.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1054/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1045 W:0    | mipstx39/jmr3904: spfatal28.exe
Result: invalid   
Time: 0:00:00.253030 spfatal28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal28.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf290 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f290
=>  Loading section .data, size 0x310 lma 40011900
=>  Start address 40000000
=>  Transfer rate: 504064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal28.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1055/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1049 W:0    | mipstx39/jmr3904: spfatal29.exe
Result: invalid   
Time: 0:00:00.503457 spfatal29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal29.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf690 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f690
=>  Loading section .data, size 0x340 lma 40011d40
=>  Start address 40000000
=>  Transfer rate: 512640 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal29.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1056/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1051 W:0    | mipstx39/jmr3904: spfatal30.exe
Result: invalid   
Time: 0:00:00.530988 spfatal30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal30.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xd3d0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000d3d0
=>  Loading section .data, size 0x2a0 lma 4000fa00
=>  Start address 40000000
=>  Transfer rate: 440064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal30.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1057/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1051 W:0    | mipstx39/jmr3904: spfatal31.exe
Result: invalid   
Time: 0:00:00.524202 spfatal31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal31.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe4a0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e4a0
=>  Loading section .data, size 0x300 lma 40010b40
=>  Start address 40000000
=>  Transfer rate: 475264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal31.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1058/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1052 W:0    | mipstx39/jmr3904: spfatal32.exe
Result: invalid   
Time: 0:00:00.510780 spfatal32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal32.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf310 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f310
=>  Loading section .data, size 0x310 lma 40011980
=>  Start address 40000000
=>  Transfer rate: 505088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal32.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1059/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1051 W:0    | mipstx39/jmr3904: spfatal33.exe
Result: invalid   
Time: 0:00:00.513402 spfatal33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal33.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf370 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f370
=>  Loading section .data, size 0x310 lma 400119c0
=>  Start address 40000000
=>  Transfer rate: 505856 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal33.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1060/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1052 W:0    | mipstx39/jmr3904: spfatal34.exe
Result: invalid   
Time: 0:00:00.502384 spfatal34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfatal34.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfatal34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf110 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f110
=>  Loading section .data, size 0x310 lma 40011740
=>  Start address 40000000
=>  Transfer rate: 500864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfatal34.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1061/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1052 W:0    | mipstx39/jmr3904: spfifo01.exe
Result: invalid   
Time: 0:00:00.528488 spfifo01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfifo01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfifo01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe220 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e220
=>  Loading section .data, size 0x2e0 lma 40010880
=>  Start address 40000000
=>  Transfer rate: 469888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfifo01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1062/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1052 W:0    | mipstx39/jmr3904: spfifo02.exe
Result: invalid   
Time: 0:00:00.558397 spfifo02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfifo02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfifo02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11b00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011b00
=>  Loading section .data, size 0x330 lma 40014140
=>  Start address 40000000
=>  Transfer rate: 587136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfifo02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1063/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1053 W:0    | mipstx39/jmr3904: spfifo03.exe
Result: invalid   
Time: 0:00:00.271906 spfifo03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfifo03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfifo03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12b60 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012b60
=>  Loading section .data, size 0x370 lma 400157c0
=>  Start address 40000000
=>  Transfer rate: 621184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfifo03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1064/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1058 W:0    | mipstx39/jmr3904: spfifo04.exe
Result: invalid   
Time: 0:00:00.509835 spfifo04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfifo04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfifo04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10fa0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010fa0
=>  Loading section .data, size 0x330 lma 40013bc0
=>  Start address 40000000
=>  Transfer rate: 563840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfifo04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1065/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1061 W:0    | mipstx39/jmr3904: spfifo05.exe
Result: invalid   
Time: 0:00:00.506107 spfifo05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfifo05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfifo05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c50 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011c50
=>  Loading section .data, size 0x330 lma 400148c0
=>  Start address 40000000
=>  Transfer rate: 589824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfifo05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1066/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1060 W:0    | mipstx39/jmr3904: spfreechain01.exe
Result: invalid   
Time: 0:00:00.524183 spfreechain01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spfreechain01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spfreechain01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe520 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e520
=>  Loading section .data, size 0x2e0 lma 40010b80
=>  Start address 40000000
=>  Transfer rate: 476032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spfreechain01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1067/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1060 W:0    | mipstx39/jmr3904: spglobalcon01.exe
Result: invalid   
Time: 0:00:00.504010 spglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spglobalcon01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xd9c0 lma 40000000
=>  Loading section .rtemsroset, size 0x60 lma 4000d9c0
=>  Loading section .data, size 0x260 lma 4000fd00
=>  Start address 40000000
=>  Transfer rate: 451584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1068/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1060 W:0    | mipstx39/jmr3904: spglobalcon02.exe
Result: invalid   
Time: 0:00:00.533995 spglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spglobalcon02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf220 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f220
=>  Loading section .data, size 0x310 lma 40011880
=>  Start address 40000000
=>  Transfer rate: 503168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1069/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1061 W:0    | mipstx39/jmr3904: spheapprot.exe
Result: invalid   
Time: 0:00:00.251455 spheapprot.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spheapprot.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spheapprot.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe140 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e140
=>  Loading section .data, size 0x2e0 lma 40010a80
=>  Start address 40000000
=>  Transfer rate: 468096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spheapprot.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1070/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1061 W:0    | mipstx39/jmr3904: spinternalerror01.exe
Result: invalid   
Time: 0:00:00.268218 spinternalerror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spinternalerror01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spinternalerror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x5530 lma 40000000
=>  Loading section .rtemsroset, size 0x50 lma 40005530
=>  Loading section .data, size 0x70 lma 40007880
=>  Start address 40000000
=>  Transfer rate: 176000 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spinternalerror01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1071/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1061 W:0    | mipstx39/jmr3904: spinternalerror02.exe
Result: invalid   
Time: 0:00:00.259374 spinternalerror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spinternalerror02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spinternalerror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe580 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e580
=>  Loading section .data, size 0x2e0 lma 40010bc0
=>  Start address 40000000
=>  Transfer rate: 476800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spinternalerror02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1072/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1064 W:0    | mipstx39/jmr3904: spintr_err01.exe
Result: invalid   
Time: 0:00:00.257474 spintr_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintr_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintr_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf830 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f830
=>  Loading section .data, size 0x310 lma 40013880
=>  Start address 40000000
=>  Transfer rate: 515584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintr_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1073/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1064 W:0    | mipstx39/jmr3904: spintrcritical01.exe
Result: invalid   
Time: 0:00:00.517907 spintrcritical01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15230 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40015230
=>  Loading section .data, size 0x420 lma 400178c0
=>  Start address 40000000
=>  Transfer rate: 702208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1074/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1070 W:0    | mipstx39/jmr3904: spintrcritical02.exe
Result: invalid   
Time: 0:00:00.504484 spintrcritical02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15240 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40015240
=>  Loading section .data, size 0x420 lma 40017900
=>  Start address 40000000
=>  Transfer rate: 702336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1075/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1070 W:0    | mipstx39/jmr3904: spintrcritical03.exe
Result: invalid   
Time: 0:00:00.540018 spintrcritical03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15240 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40015240
=>  Loading section .data, size 0x420 lma 40017900
=>  Start address 40000000
=>  Transfer rate: 702336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1076/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1070 W:0    | mipstx39/jmr3904: spintrcritical04.exe
Result: invalid   
Time: 0:00:00.517091 spintrcritical04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15240 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40015240
=>  Loading section .data, size 0x420 lma 40017900
=>  Start address 40000000
=>  Transfer rate: 702336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1077/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1070 W:0    | mipstx39/jmr3904: spintrcritical05.exe
Result: invalid   
Time: 0:00:00.504801 spintrcritical05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15250 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40015250
=>  Loading section .data, size 0x420 lma 40017900
=>  Start address 40000000
=>  Transfer rate: 702464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1078/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1070 W:0    | mipstx39/jmr3904: spintrcritical08.exe
Result: invalid   
Time: 0:00:00.520064 spintrcritical08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c30 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40014c30
=>  Loading section .data, size 0x420 lma 40017340
=>  Start address 40000000
=>  Transfer rate: 689920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1079/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1070 W:0    | mipstx39/jmr3904: spintrcritical09.exe
Result: invalid   
Time: 0:00:00.509857 spintrcritical09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical09.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14e40 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40014e40
=>  Loading section .data, size 0x420 lma 40017500
=>  Start address 40000000
=>  Transfer rate: 694144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical09.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1080/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1070 W:0    | mipstx39/jmr3904: spintrcritical10.exe
Result: invalid   
Time: 0:00:00.253324 spintrcritical10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical10.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14b50 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40014b50
=>  Loading section .data, size 0x410 lma 400171c0
=>  Start address 40000000
=>  Transfer rate: 688000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical10.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1081/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1072 W:0    | mipstx39/jmr3904: spintrcritical11.exe
Result: invalid   
Time: 0:00:00.255390 spintrcritical11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical11.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x142f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400142f0
=>  Loading section .data, size 0x3f0 lma 40016940
=>  Start address 40000000
=>  Transfer rate: 670464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical11.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1082/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1072 W:0    | mipstx39/jmr3904: spintrcritical12.exe
Result: invalid   
Time: 0:00:00.252720 spintrcritical12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical12.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14300 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014300
=>  Loading section .data, size 0x3f0 lma 40016940
=>  Start address 40000000
=>  Transfer rate: 670592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical12.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1083/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1080 W:0    | mipstx39/jmr3904: spintrcritical13.exe
Result: invalid   
Time: 0:00:00.508495 spintrcritical13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical13.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14510 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40014510
=>  Loading section .data, size 0x420 lma 40016ec0
=>  Start address 40000000
=>  Transfer rate: 675328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical13.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1084/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1080 W:0    | mipstx39/jmr3904: spintrcritical14.exe
Result: invalid   
Time: 0:00:00.506323 spintrcritical14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical14.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x146a0 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 400146a0
=>  Loading section .data, size 0x420 lma 40017300
=>  Start address 40000000
=>  Transfer rate: 678528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical14.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1085/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1080 W:0    | mipstx39/jmr3904: spintrcritical15.exe
Result: invalid   
Time: 0:00:00.509898 spintrcritical15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical15.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15350 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40015350
=>  Loading section .data, size 0x420 lma 40017cc0
=>  Start address 40000000
=>  Transfer rate: 704512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical15.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1086/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1080 W:0    | mipstx39/jmr3904: spintrcritical16.exe
Result: invalid   
Time: 0:00:00.517392 spintrcritical16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical16.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x152b0 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 400152b0
=>  Loading section .data, size 0x420 lma 40017940
=>  Start address 40000000
=>  Transfer rate: 703232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical16.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1087/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1080 W:0    | mipstx39/jmr3904: spintrcritical18.exe
Result: invalid   
Time: 0:00:00.505233 spintrcritical18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical18.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400147f0
=>  Loading section .data, size 0x3f0 lma 40017400
=>  Start address 40000000
=>  Transfer rate: 680704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical18.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1088/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1080 W:0    | mipstx39/jmr3904: spintrcritical20.exe
Result: invalid   
Time: 0:00:00.567695 spintrcritical20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical20.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x157d0 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 400157d0
=>  Loading section .data, size 0x420 lma 40018140
=>  Start address 40000000
=>  Transfer rate: 713728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical20.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1089/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1080 W:0    | mipstx39/jmr3904: spintrcritical21.exe
Result: invalid   
Time: 0:00:00.508319 spintrcritical21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical21.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14710 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40014710
=>  Loading section .data, size 0x400 lma 40017040
=>  Start address 40000000
=>  Transfer rate: 679168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical21.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1090/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1080 W:0    | mipstx39/jmr3904: spintrcritical22.exe
Result: invalid   
Time: 0:00:00.510255 spintrcritical22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical22.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x154e0 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 400154e0
=>  Loading section .data, size 0x420 lma 40017b80
=>  Start address 40000000
=>  Transfer rate: 707712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical22.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1091/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1088 W:0    | mipstx39/jmr3904: spintrcritical23.exe
Result: invalid   
Time: 0:00:00.563929 spintrcritical23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical23.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14390 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014390
=>  Loading section .data, size 0x3f0 lma 40016a00
=>  Start address 40000000
=>  Transfer rate: 671744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical23.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1092/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1088 W:0    | mipstx39/jmr3904: spintrcritical24.exe
Result: invalid   
Time: 0:00:00.575582 spintrcritical24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical24.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spintrcritical24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15350 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40015350
=>  Loading section .data, size 0x3f0 lma 400179c0
=>  Start address 40000000
=>  Transfer rate: 704000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spintrcritical24.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1093/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1088 W:0    | mipstx39/jmr3904: splinkersets01.exe
Result: invalid   
Time: 0:00:00.522548 splinkersets01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/splinkersets01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/splinkersets01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf010 lma 40000000
=>  Loading section .rtemsroset, size 0xb0 lma 4000f010
=>  Loading section .data, size 0x2e0 lma 40011680
=>  Loading section .rtemsrwset, size 0x34 lma 40011960
=>  Start address 40000000
=>  Transfer rate: 499360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/splinkersets01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1094/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1088 W:0    | mipstx39/jmr3904: spmisc01.exe
Result: invalid   
Time: 0:00:00.504364 spmisc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spmisc01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spmisc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe300 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000e300
=>  Loading section .data, size 0x2e0 lma 40010940
=>  Start address 40000000
=>  Transfer rate: 471808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spmisc01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1095/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1088 W:0    | mipstx39/jmr3904: spmkdir.exe
Result: invalid   
Time: 0:00:00.506577 spmkdir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spmkdir.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spmkdir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeaa0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eaa0
=>  Loading section .data, size 0x2e0 lma 40011100
=>  Start address 40000000
=>  Transfer rate: 487296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spmkdir.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1096/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1088 W:0    | mipstx39/jmr3904: spmountmgr01.exe
Result: invalid   
Time: 0:00:00.505786 spmountmgr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spmountmgr01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spmountmgr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xee20 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ee20
=>  Loading section .data, size 0x2e0 lma 40011480
=>  Start address 40000000
=>  Transfer rate: 494464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spmountmgr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1097/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1088 W:0    | mipstx39/jmr3904: spmrsp01.exe
Result: invalid   
Time: 0:00:00.555288 spmrsp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spmrsp01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spmrsp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x110c0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400110c0
=>  Loading section .data, size 0x370 lma 40013a40
=>  Start address 40000000
=>  Transfer rate: 566656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spmrsp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1098/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1088 W:0    | mipstx39/jmr3904: spmsgq_err01.exe
Result: invalid   
Time: 0:00:00.602755 spmsgq_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spmsgq_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spmsgq_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x120e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400120e0
=>  Loading section .data, size 0x340 lma 40016180
=>  Start address 40000000
=>  Transfer rate: 599296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spmsgq_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1099/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1096 W:0    | mipstx39/jmr3904: spmsgq_err02.exe
Result: invalid   
Time: 0:00:00.519390 spmsgq_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spmsgq_err02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spmsgq_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f10 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010f10
=>  Loading section .data, size 0x340 lma 40014f80
=>  Start address 40000000
=>  Transfer rate: 562816 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spmsgq_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1100/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1096 W:0    | mipstx39/jmr3904: spmutex01.exe
Result: invalid   
Time: 0:00:00.515217 spmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spmutex01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12890 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012890
=>  Loading section .data, size 0x370 lma 40015b00
=>  Start address 40000000
=>  Transfer rate: 615424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1101/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1096 W:0    | mipstx39/jmr3904: spnsext01.exe
Result: invalid   
Time: 0:00:00.514046 spnsext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spnsext01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spnsext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf040 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f040
=>  Loading section .data, size 0x310 lma 40011680
=>  Start address 40000000
=>  Transfer rate: 499328 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spnsext01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1102/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1096 W:0    | mipstx39/jmr3904: spntp01.exe
Result: invalid   
Time: 0:00:00.774387 spntp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spntp01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spntp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ef0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013ef0
=>  Loading section .data, size 0x350 lma 40016540
=>  Start address 40000000
=>  Transfer rate: 660992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spntp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1103/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1096 W:0    | mipstx39/jmr3904: spobjgetnext.exe
Result: invalid   
Time: 0:00:00.797684 spobjgetnext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spobjgetnext.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spobjgetnext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf0f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f0f0
=>  Loading section .data, size 0x310 lma 40011a40
=>  Start address 40000000
=>  Transfer rate: 500736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spobjgetnext.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1104/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1096 W:0    | mipstx39/jmr3904: sppagesize.exe
Result: invalid   
Time: 0:00:00.792410 sppagesize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sppagesize.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sppagesize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe0b0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e0b0
=>  Loading section .data, size 0x2e0 lma 40010700
=>  Start address 40000000
=>  Transfer rate: 466944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sppagesize.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1105/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1096 W:0    | mipstx39/jmr3904: sppartition_err01.exe
Result: invalid   
Time: 0:00:00.796984 sppartition_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sppartition_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sppartition_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10a00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010a00
=>  Loading section .data, size 0x340 lma 40013080
=>  Start address 40000000
=>  Transfer rate: 552448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sppartition_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1106/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1096 W:0    | mipstx39/jmr3904: sppercpudata01.exe
Result: invalid   
Time: 0:00:00.783430 sppercpudata01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sppercpudata01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sppercpudata01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe910 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e910
=>  Loading section .data, size 0x2e0 lma 40010f40
=>  Loading section .rtemsrwset, size 0x48 lma 40011220
=>  Start address 40000000
=>  Transfer rate: 484672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sppercpudata01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1107/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1099 W:0    | mipstx39/jmr3904: spport_err01.exe
Result: invalid   
Time: 0:00:00.757426 spport_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spport_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spport_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfd70 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fd70
=>  Loading section .data, size 0x340 lma 40013dc0
=>  Start address 40000000
=>  Transfer rate: 526720 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spport_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1108/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1099 W:0    | mipstx39/jmr3904: sppps01.exe
Result: invalid   
Time: 0:00:01.506291 sppps01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sppps01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sppps01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14110 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 40014110
=>  Loading section .data, size 0x370 lma 40016a40
=>  Start address 40000000
=>  Transfer rate: 665728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sppps01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1109/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1099 W:0    | mipstx39/jmr3904: spprintk.exe
Result: invalid   
Time: 0:00:01.291183 spprintk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spprintk.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spprintk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xedc0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000edc0
=>  Loading section .data, size 0x2a0 lma 40011400
=>  Start address 40000000
=>  Transfer rate: 493184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spprintk.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1110/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1104 W:0    | mipstx39/jmr3904: spprivenv01.exe
Result: invalid   
Time: 0:00:01.037457 spprivenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spprivenv01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spprivenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10560 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010560
=>  Loading section .data, size 0x350 lma 40013180
=>  Start address 40000000
=>  Transfer rate: 543104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spprivenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1111/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1104 W:0    | mipstx39/jmr3904: spprofiling01.exe
Result: invalid   
Time: 0:00:01.020592 spprofiling01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spprofiling01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spprofiling01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf090 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f090
=>  Loading section .data, size 0x310 lma 40011700
=>  Start address 40000000
=>  Transfer rate: 499968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spprofiling01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1112/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1104 W:0    | mipstx39/jmr3904: spqreslib.exe
Result: invalid   
Time: 0:00:01.016363 spqreslib.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spqreslib.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spqreslib.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12620 lma 40000000
=>  Loading section .tdata, size 0xc lma 40012620
=>  Loading section .rtemsroset, size 0x80 lma 40012630
=>  Loading section .data, size 0x350 lma 40015680
=>  Start address 40000000
=>  Transfer rate: 610272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spqreslib.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1113/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1104 W:0    | mipstx39/jmr3904: spratemon_err01.exe
Result: invalid   
Time: 0:00:01.264902 spratemon_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spratemon_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spratemon_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x115b0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400115b0
=>  Loading section .data, size 0x340 lma 40015680
=>  Start address 40000000
=>  Transfer rate: 576384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spratemon_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1114/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1104 W:0    | mipstx39/jmr3904: sprbtree01.exe
Result: invalid   
Time: 0:00:01.268903 sprbtree01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sprbtree01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sprbtree01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15680 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40015680
=>  Loading section .data, size 0x370 lma 40017cc0
=>  Start address 40000000
=>  Transfer rate: 709376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sprbtree01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1115/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1105 W:0    | mipstx39/jmr3904: spregion_err01.exe
Result: invalid   
Time: 0:00:00.755842 spregion_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spregion_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spregion_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12580 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012580
=>  Loading section .data, size 0x340 lma 40014c80
=>  Start address 40000000
=>  Transfer rate: 608768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spregion_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1116/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1113 W:0    | mipstx39/jmr3904: sprmsched01.exe
Result: invalid   
Time: 0:00:00.502931 sprmsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sprmsched01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sprmsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x104c0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400104c0
=>  Loading section .data, size 0x340 lma 40013240
=>  Start address 40000000
=>  Transfer rate: 541696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sprmsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1117/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1113 W:0    | mipstx39/jmr3904: sprmsched02.exe
Result: invalid   
Time: 0:00:00.254002 sprmsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sprmsched02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sprmsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fe80
=>  Loading section .data, size 0x340 lma 40012580
=>  Start address 40000000
=>  Transfer rate: 528896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sprmsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1118/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1113 W:0    | mipstx39/jmr3904: spscheduler01.exe
Result: invalid   
Time: 0:00:00.506445 spscheduler01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spscheduler01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spscheduler01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13bc0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40013bc0
=>  Loading section .data, size 0x370 lma 40016540
=>  Start address 40000000
=>  Transfer rate: 654720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spscheduler01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1119/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1113 W:0    | mipstx39/jmr3904: spsem01.exe
Result: invalid   
Time: 0:00:00.525445 spsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsem01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10ee0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010ee0
=>  Loading section .data, size 0x340 lma 40013b80
=>  Start address 40000000
=>  Transfer rate: 562432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1120/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1113 W:0    | mipstx39/jmr3904: spsem02.exe
Result: invalid   
Time: 0:00:00.505489 spsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsem02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11290 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011290
=>  Loading section .data, size 0x340 lma 40014200
=>  Start address 40000000
=>  Transfer rate: 569984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1121/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1113 W:0    | mipstx39/jmr3904: spsem03.exe
Result: invalid   
Time: 0:00:00.549211 spsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsem03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfca0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fca0
=>  Loading section .data, size 0x340 lma 40012c00
=>  Start address 40000000
=>  Transfer rate: 525056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1122/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1114 W:0    | mipstx39/jmr3904: spsem_err01.exe
Result: invalid   
Time: 0:00:00.513468 spsem_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsem_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsem_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x111e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400111e0
=>  Loading section .data, size 0x340 lma 40015280
=>  Start address 40000000
=>  Transfer rate: 568576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsem_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1123/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1114 W:0    | mipstx39/jmr3904: spsem_err02.exe
Result: invalid   
Time: 0:00:00.510878 spsem_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsem_err02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsem_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11180 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011180
=>  Loading section .data, size 0x340 lma 40015240
=>  Start address 40000000
=>  Transfer rate: 567808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsem_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1124/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1114 W:0    | mipstx39/jmr3904: spsignal_err01.exe
Result: invalid   
Time: 0:00:00.255587 spsignal_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsignal_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsignal_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf6d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f6d0
=>  Loading section .data, size 0x310 lma 40013700
=>  Start address 40000000
=>  Transfer rate: 512768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsignal_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1125/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1120 W:0    | mipstx39/jmr3904: spsimplesched01.exe
Result: invalid   
Time: 0:00:00.753313 spsimplesched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsimplesched01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsimplesched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400105d0
=>  Loading section .data, size 0x4b0 lma 40013440
=>  Start address 40000000
=>  Transfer rate: 546816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsimplesched01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1126/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1121 W:0    | mipstx39/jmr3904: spsimplesched02.exe
Result: invalid   
Time: 0:00:00.755231 spsimplesched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsimplesched02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsimplesched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10710 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010710
=>  Loading section .data, size 0x340 lma 40013340
=>  Start address 40000000
=>  Transfer rate: 546432 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsimplesched02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1127/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1122 W:0    | mipstx39/jmr3904: spsimplesched03.exe
Result: invalid   
Time: 0:00:00.765995 spsimplesched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsimplesched03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsimplesched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf2f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f2f0
=>  Loading section .data, size 0x340 lma 40011c00
=>  Start address 40000000
=>  Transfer rate: 505216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsimplesched03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1128/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1122 W:0    | mipstx39/jmr3904: spsize.exe
Result: invalid   
Time: 0:00:00.755320 spsize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsize.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11890 lma 40000000
=>  Loading section .tdata, size 0xc lma 40011890
=>  Loading section .rtemsroset, size 0x80 lma 400118a0
=>  Loading section .data, size 0x310 lma 40013f00
=>  Start address 40000000
=>  Transfer rate: 581984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsize.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1129/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1121 W:0    | mipstx39/jmr3904: spstdc17.exe
Result: invalid   
Time: 0:00:01.050694 spstdc17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spstdc17.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spstdc17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xdf80 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000df80
=>  Loading section .data, size 0x2e0 lma 400105c0
=>  Start address 40000000
=>  Transfer rate: 464512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spstdc17.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1130/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1121 W:0    | mipstx39/jmr3904: spstdthreads01.exe
Result: invalid   
Time: 0:00:01.041100 spstdthreads01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spstdthreads01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spstdthreads01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x121e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400121e0
=>  Loading section .data, size 0x420 lma 400153c0
=>  Start address 40000000
=>  Transfer rate: 603136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spstdthreads01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1131/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1122 W:0    | mipstx39/jmr3904: spstkalloc.exe
Result: invalid   
Time: 0:00:00.757175 spstkalloc.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spstkalloc.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spstkalloc.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xea50 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ea50
=>  Loading section .data, size 0x2e0 lma 40011640
=>  Start address 40000000
=>  Transfer rate: 486656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spstkalloc.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1132/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1122 W:0    | mipstx39/jmr3904: spstkalloc02.exe
Result: invalid   
Time: 0:00:00.756439 spstkalloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spstkalloc02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spstkalloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xa290 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000a290
=>  Loading section .data, size 0x1e0 lma 4000d440
=>  Start address 40000000
=>  Transfer rate: 337664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spstkalloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1133/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1124 W:0    | mipstx39/jmr3904: spstkalloc03.exe
Result: invalid   
Time: 0:00:00.251197 spstkalloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spstkalloc03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spstkalloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15ad0 lma 40000000
=>  Loading section .tdata, size 0xc lma 40015ad0
=>  Loading section .rtemsroset, size 0x70 lma 40015ae0
=>  Loading section .data, size 0x480 lma 40017140
=>  Start address 40000000
=>  Transfer rate: 720480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spstkalloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1134/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1128 W:0    | mipstx39/jmr3904: spstkalloc04.exe
Result: invalid   
Time: 0:00:00.764656 spstkalloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spstkalloc04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spstkalloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15a30 lma 40000000
=>  Loading section .tdata, size 0xc lma 40015a30
=>  Loading section .rtemsroset, size 0x70 lma 40015a40
=>  Loading section .data, size 0x480 lma 40017080
=>  Start address 40000000
=>  Transfer rate: 719200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spstkalloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1135/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1129 W:0    | mipstx39/jmr3904: spsysinit01.exe
Result: invalid   
Time: 0:00:00.776482 spsysinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsysinit01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsysinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18270 lma 40000000
=>  Loading section .rtemsroset, size 0x310 lma 40018270
=>  Loading section .data, size 0x6a0 lma 4001b5c0
=>  Start address 40000000
=>  Transfer rate: 811264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsysinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1136/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1129 W:0    | mipstx39/jmr3904: spsyslock01.exe
Result: invalid   
Time: 0:00:00.764086 spsyslock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spsyslock01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spsyslock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11f20 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011f20
=>  Loading section .data, size 0x310 lma 40014e00
=>  Start address 40000000
=>  Transfer rate: 595328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spsyslock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1137/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1131 W:0    | mipstx39/jmr3904: sptask_err01.exe
Result: invalid   
Time: 0:00:00.761403 sptask_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptask_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptask_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf8f0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f8f0
=>  Loading section .data, size 0x310 lma 40013940
=>  Start address 40000000
=>  Transfer rate: 517120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptask_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1138/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1129 W:0    | mipstx39/jmr3904: sptask_err02.exe
Result: invalid   
Time: 0:00:00.764761 sptask_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptask_err02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptask_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10340 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010340
=>  Loading section .data, size 0x330 lma 40012980
=>  Start address 40000000
=>  Transfer rate: 538496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptask_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1139/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1131 W:0    | mipstx39/jmr3904: sptask_err03.exe
Result: invalid   
Time: 0:00:00.768993 sptask_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptask_err03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptask_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10240 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010240
=>  Loading section .data, size 0x310 lma 40014280
=>  Start address 40000000
=>  Transfer rate: 536192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptask_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1140/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1131 W:0    | mipstx39/jmr3904: sptask_err04.exe
Result: invalid   
Time: 0:00:00.764879 sptask_err04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptask_err04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptask_err04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11010 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011010
=>  Loading section .data, size 0x310 lma 40013940
=>  Start address 40000000
=>  Transfer rate: 564480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptask_err04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1141/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1131 W:0    | mipstx39/jmr3904: sptasknopreempt01.exe
Result: invalid   
Time: 0:00:00.766653 sptasknopreempt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptasknopreempt01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptasknopreempt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf470 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f470
=>  Loading section .data, size 0x340 lma 40012080
=>  Start address 40000000
=>  Transfer rate: 508288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptasknopreempt01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1142/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1132 W:0    | mipstx39/jmr3904: spthread01.exe
Result: invalid   
Time: 0:00:00.814382 spthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spthread01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x100a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400100a0
=>  Loading section .data, size 0x310 lma 400129c0
=>  Start address 40000000
=>  Transfer rate: 532864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1143/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1139 W:0    | mipstx39/jmr3904: spthreadlife01.exe
Result: invalid   
Time: 0:00:00.528853 spthreadlife01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spthreadlife01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spthreadlife01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11790 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011790
=>  Loading section .data, size 0x370 lma 40014100
=>  Start address 40000000
=>  Transfer rate: 580608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spthreadlife01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1144/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1137 W:0    | mipstx39/jmr3904: spthreadq01.exe
Result: invalid   
Time: 0:00:00.551249 spthreadq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spthreadq01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spthreadq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10950 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010950
=>  Loading section .data, size 0x3a0 lma 40013400
=>  Start address 40000000
=>  Transfer rate: 551808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spthreadq01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1145/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1139 W:0    | mipstx39/jmr3904: sptimecounter01.exe
Result: invalid   
Time: 0:00:00.511888 sptimecounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptimecounter01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptimecounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x77e0 lma 40000000
=>  Loading section .rtemsroset, size 0x50 lma 400077e0
=>  Loading section .data, size 0x110 lma 40009b00
=>  Start address 40000000
=>  Transfer rate: 248320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptimecounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1146/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1139 W:0    | mipstx39/jmr3904: sptimecounter02.exe
Result: invalid   
Time: 0:00:00.517885 sptimecounter02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptimecounter02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptimecounter02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10380 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010380
=>  Loading section .data, size 0x340 lma 40018680
=>  Start address 40000000
=>  Transfer rate: 539136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptimecounter02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1147/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1139 W:0    | mipstx39/jmr3904: sptimecounter03.exe
Result: invalid   
Time: 0:00:00.255857 sptimecounter03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptimecounter03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptimecounter03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf9d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f9d0
=>  Loading section .data, size 0x340 lma 40017980
=>  Start address 40000000
=>  Transfer rate: 519296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptimecounter03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1148/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1139 W:0    | mipstx39/jmr3904: sptimecounter04.exe
Result: invalid   
Time: 0:00:00.300536 sptimecounter04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptimecounter04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptimecounter04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf290 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f290
=>  Loading section .data, size 0x310 lma 40011900
=>  Start address 40000000
=>  Transfer rate: 504064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptimecounter04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1149/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1139 W:0    | mipstx39/jmr3904: sptimer_err01.exe
Result: invalid   
Time: 0:00:00.562148 sptimer_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptimer_err01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptimer_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11340 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011340
=>  Loading section .data, size 0x360 lma 40013a00
=>  Start address 40000000
=>  Transfer rate: 571648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptimer_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1150/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1141 W:0    | mipstx39/jmr3904: sptimer_err02.exe
Result: invalid   
Time: 0:00:00.252491 sptimer_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptimer_err02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptimer_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f90 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010f90
=>  Loading section .data, size 0x360 lma 40013900
=>  Start address 40000000
=>  Transfer rate: 564096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptimer_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1151/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1147 W:0    | mipstx39/jmr3904: sptimerserver01.exe
Result: invalid   
Time: 0:00:00.530365 sptimerserver01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptimerserver01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptimerserver01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fb80
=>  Loading section .data, size 0x360 lma 40012540
=>  Start address 40000000
=>  Transfer rate: 523008 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptimerserver01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1152/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1147 W:0    | mipstx39/jmr3904: sptimespec01.exe
Result: invalid   
Time: 0:00:00.523342 sptimespec01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptimespec01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptimespec01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfc00 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fc00
=>  Loading section .data, size 0x320 lma 40012240
=>  Start address 40000000
=>  Transfer rate: 523520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptimespec01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1153/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1147 W:0    | mipstx39/jmr3904: sptls01.exe
Result: invalid   
Time: 0:00:00.518563 sptls01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptls01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptls01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf5e0 lma 40000000
=>  Loading section .tdata, size 0x1 lma 4000f5e0
=>  Loading section .rtemsroset, size 0x78 lma 4000f5e8
=>  Loading section .data, size 0x310 lma 40011f00
=>  Start address 40000000
=>  Transfer rate: 510792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptls01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1154/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1148 W:0    | mipstx39/jmr3904: sptls02.exe
Result: invalid   
Time: 0:00:00.527072 sptls02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptls02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptls02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2c040 lma 40000000
=>  Loading section .tdata, size 0x114 lma 4002c200
=>  Loading section .rtemsroset, size 0x80 lma 4002c400
=>  Loading section .data, size 0x5f0 lma 4002ed80
=>  Start address 40000000
=>  Transfer rate: 1457696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptls02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1155/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1148 W:0    | mipstx39/jmr3904: sptls03.exe
Result: invalid   
Time: 0:00:00.530960 sptls03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptls03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptls03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9bb0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40009bb0
=>  Loading section .data, size 0x1e0 lma 4000c200
=>  Start address 40000000
=>  Transfer rate: 323584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptls03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1156/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1147 W:0    | mipstx39/jmr3904: sptls04.exe
Result: invalid   
Time: 0:00:00.507545 sptls04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/sptls04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/sptls04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe0a0 lma 40000000
=>  Loading section .tdata, size 0x4 lma 4000e0a0
=>  Loading section .rtemsroset, size 0x78 lma 4000e0a8
=>  Loading section .data, size 0x2e0 lma 40010700
=>  Start address 40000000
=>  Transfer rate: 466912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/sptls04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1157/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1147 W:0    | mipstx39/jmr3904: spunlimited01.exe
Result: invalid   
Time: 0:00:00.536742 spunlimited01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spunlimited01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spunlimited01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14100 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40014100
=>  Loading section .data, size 0x370 lma 400167c0
=>  Start address 40000000
=>  Transfer rate: 665472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spunlimited01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1158/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1148 W:0    | mipstx39/jmr3904: spversion01.exe
Result: invalid   
Time: 0:00:00.516326 spversion01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spversion01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spversion01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe1a0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e1a0
=>  Loading section .data, size 0x2e0 lma 40010800
=>  Start address 40000000
=>  Transfer rate: 468864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spversion01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1159/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1152 W:0    | mipstx39/jmr3904: spwatchdog.exe
Result: invalid   
Time: 0:00:00.513573 spwatchdog.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spwatchdog.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spwatchdog.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11c80 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011c80
=>  Loading section .data, size 0x380 lma 40014640
=>  Start address 40000000
=>  Transfer rate: 590848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spwatchdog.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1160/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1154 W:0    | mipstx39/jmr3904: spwkspace.exe
Result: invalid   
Time: 0:00:00.263739 spwkspace.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/sptests/spwkspace.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/sptests/spwkspace.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe8b0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e8b0
=>  Loading section .data, size 0x2e0 lma 40010f00
=>  Start address 40000000
=>  Transfer rate: 483328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/sptests/spwkspace.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1161/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1152 W:0    | mipstx39/jmr3904: tm01.exe
Result: invalid   
Time: 0:00:00.507855 tm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfb80 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fb80
=>  Loading section .data, size 0x310 lma 40012500
=>  Start address 40000000
=>  Transfer rate: 522240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1162/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1155 W:0    | mipstx39/jmr3904: tm02.exe
Result: invalid   
Time: 0:00:00.291144 tm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm02.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf730 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f730
=>  Loading section .data, size 0x310 lma 40024300
=>  Start address 40000000
=>  Transfer rate: 513408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm02.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1163/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1156 W:0    | mipstx39/jmr3904: tm03.exe
Result: invalid   
Time: 0:00:00.521257 tm03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm03.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa70 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fa70
=>  Loading section .data, size 0x310 lma 40024640
=>  Start address 40000000
=>  Transfer rate: 520064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm03.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1164/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1156 W:0    | mipstx39/jmr3904: tm04.exe
Result: invalid   
Time: 0:00:00.265084 tm04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm04.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11070 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40011070
=>  Loading section .data, size 0x310 lma 40025f00
=>  Start address 40000000
=>  Transfer rate: 565120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm04.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1165/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1157 W:0    | mipstx39/jmr3904: tm05.exe
Result: invalid   
Time: 0:00:00.265717 tm05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm05.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe9d0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e9d0
=>  Loading section .data, size 0x2e0 lma 40023280
=>  Start address 40000000
=>  Transfer rate: 485632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm05.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1166/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1156 W:0    | mipstx39/jmr3904: tm06.exe
Result: invalid   
Time: 0:00:00.516170 tm06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm06.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf140 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f140
=>  Loading section .data, size 0x2e0 lma 40023a00
=>  Start address 40000000
=>  Transfer rate: 500864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm06.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1167/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1161 W:0    | mipstx39/jmr3904: tm07.exe
Result: invalid   
Time: 0:00:00.770889 tm07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm07.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xec30 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ec30
=>  Loading section .data, size 0x2e0 lma 400234c0
=>  Start address 40000000
=>  Transfer rate: 490496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm07.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1168/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1161 W:0    | mipstx39/jmr3904: tm08.exe
Result: invalid   
Time: 0:00:01.006125 tm08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm08.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfe10 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fe10
=>  Loading section .data, size 0x310 lma 40012a00
=>  Start address 40000000
=>  Transfer rate: 527488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm08.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1169/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1161 W:0    | mipstx39/jmr3904: tm09.exe
Result: invalid   
Time: 0:00:00.782705 tm09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm09.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa80 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fa80
=>  Loading section .data, size 0x310 lma 40012400
=>  Start address 40000000
=>  Transfer rate: 520192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm09.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1170/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1161 W:0    | mipstx39/jmr3904: tm10.exe
Result: invalid   
Time: 0:00:00.762789 tm10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm10.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf4e0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f4e0
=>  Loading section .data, size 0x310 lma 40023dc0
=>  Start address 40000000
=>  Transfer rate: 508672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm10.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1171/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1162 W:0    | mipstx39/jmr3904: tm11.exe
Result: invalid   
Time: 0:00:00.805441 tm11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm11.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf730 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f730
=>  Loading section .data, size 0x310 lma 40024300
=>  Start address 40000000
=>  Transfer rate: 513408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm11.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1172/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1164 W:0    | mipstx39/jmr3904: tm12.exe
Result: invalid   
Time: 0:00:00.755286 tm12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm12.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf7a0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f7a0
=>  Loading section .data, size 0x310 lma 40024380
=>  Start address 40000000
=>  Transfer rate: 514304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm12.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1173/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1164 W:0    | mipstx39/jmr3904: tm13.exe
Result: invalid   
Time: 0:00:00.756342 tm13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm13.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf740 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f740
=>  Loading section .data, size 0x310 lma 40024300
=>  Start address 40000000
=>  Transfer rate: 513536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm13.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1174/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1164 W:0    | mipstx39/jmr3904: tm14.exe
Result: invalid   
Time: 0:00:00.758580 tm14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm14.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf7a0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f7a0
=>  Loading section .data, size 0x310 lma 40024380
=>  Start address 40000000
=>  Transfer rate: 514304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm14.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1175/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1172 W:0    | mipstx39/jmr3904: tm15.exe
Result: invalid   
Time: 0:00:00.525640 tm15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm15.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeec0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eec0
=>  Loading section .data, size 0x2e0 lma 40023780
=>  Start address 40000000
=>  Transfer rate: 495744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm15.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1176/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1172 W:0    | mipstx39/jmr3904: tm16.exe
Result: invalid   
Time: 0:00:00.505238 tm16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm16.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xec90 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ec90
=>  Loading section .data, size 0x2e0 lma 40023800
=>  Start address 40000000
=>  Transfer rate: 491264 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm16.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1177/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1172 W:0    | mipstx39/jmr3904: tm17.exe
Result: invalid   
Time: 0:00:00.263654 tm17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm17.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeac0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eac0
=>  Loading section .data, size 0x2e0 lma 40023380
=>  Start address 40000000
=>  Transfer rate: 487552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm17.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1178/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1172 W:0    | mipstx39/jmr3904: tm18.exe
Result: invalid   
Time: 0:00:00.516616 tm18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm18.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe800 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e800
=>  Loading section .data, size 0x2e0 lma 400230c0
=>  Start address 40000000
=>  Transfer rate: 481920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm18.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1179/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1173 W:0    | mipstx39/jmr3904: tm19.exe
Result: invalid   
Time: 0:00:00.512036 tm19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm19.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf260 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f260
=>  Loading section .data, size 0x2e0 lma 40012140
=>  Start address 40000000
=>  Transfer rate: 503168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm19.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1180/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1172 W:0    | mipstx39/jmr3904: tm20.exe
Result: invalid   
Time: 0:00:00.505572 tm20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm20.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x109a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400109a0
=>  Loading section .data, size 0x360 lma 40013680
=>  Start address 40000000
=>  Transfer rate: 551936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm20.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1181/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1173 W:0    | mipstx39/jmr3904: tm21.exe
Result: invalid   
Time: 0:00:00.507697 tm21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm21.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x102b0 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 400102b0
=>  Loading section .data, size 0x430 lma 40033780
=>  Start address 40000000
=>  Transfer rate: 539520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm21.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1182/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1172 W:0    | mipstx39/jmr3904: tm22.exe
Result: invalid   
Time: 0:00:00.503777 tm22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm22.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf9c0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f9c0
=>  Loading section .data, size 0x310 lma 40012900
=>  Start address 40000000
=>  Transfer rate: 518656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm22.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1183/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1174 W:0    | mipstx39/jmr3904: tm23.exe
Result: invalid   
Time: 0:00:00.259740 tm23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm23.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10060 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 40010060
=>  Loading section .data, size 0x340 lma 40026240
=>  Start address 40000000
=>  Transfer rate: 532608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm23.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1184/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1176 W:0    | mipstx39/jmr3904: tm24.exe
Result: invalid   
Time: 0:00:00.532850 tm24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm24.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xe9b0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000e9b0
=>  Loading section .data, size 0x2e0 lma 40023240
=>  Start address 40000000
=>  Transfer rate: 485376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm24.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1185/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1178 W:0    | mipstx39/jmr3904: tm25.exe
Result: invalid   
Time: 0:00:00.509393 tm25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm25.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf800 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f800
=>  Loading section .data, size 0x320 lma 40024100
=>  Start address 40000000
=>  Transfer rate: 515200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm25.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1186/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1181 W:0    | mipstx39/jmr3904: tm26.exe
Result: invalid   
Time: 0:00:00.544887 tm26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm26.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x174d0 lma 40000000
=>  Loading section .tdata, size 0xc lma 400174d0
=>  Loading section .rtemsroset, size 0x70 lma 400174e0
=>  Loading section .data, size 0x4b0 lma 4002c940
=>  Start address 40000000
=>  Transfer rate: 774112 bits/sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm26.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1187/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1181 W:0    | mipstx39/jmr3904: tm27.exe
Result: invalid   
Time: 0:00:00.551419 tm27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm27.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfef0 lma 40000000
=>  Loading section .tdata, size 0xc lma 4000fef0
=>  Loading section .rtemsroset, size 0x70 lma 4000ff00
=>  Loading section .data, size 0x2f0 lma 40012b00
=>  Start address 40000000
=>  Transfer rate: 529120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm27.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1188/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1181 W:0    | mipstx39/jmr3904: tm28.exe
Result: invalid   
Time: 0:00:00.520855 tm28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm28.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeb90 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eb90
=>  Loading section .data, size 0x310 lma 400114c0
=>  Start address 40000000
=>  Transfer rate: 489600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm28.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1189/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1181 W:0    | mipstx39/jmr3904: tm29.exe
Result: invalid   
Time: 0:00:00.516989 tm29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm29.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf5a0 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f5a0
=>  Loading section .data, size 0x310 lma 40028300
=>  Start address 40000000
=>  Transfer rate: 510208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm29.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1190/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1181 W:0    | mipstx39/jmr3904: tm30.exe
Result: invalid   
Time: 0:00:00.525189 tm30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm30.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xed70 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000ed70
=>  Loading section .data, size 0x310 lma 40012340
=>  Start address 40000000
=>  Transfer rate: 493440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm30.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1191/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1181 W:0    | mipstx39/jmr3904: tm31.exe
Result: invalid   
Time: 0:00:00.517017 tm31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm31.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf740 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f740
=>  Loading section .data, size 0x310 lma 40024300
=>  Start address 40000000
=>  Transfer rate: 513536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm31.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1192/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1183 W:0    | mipstx39/jmr3904: tm32.exe
Result: invalid   
Time: 0:00:00.262452 tm32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm32.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa80 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fa80
=>  Loading section .data, size 0x310 lma 40024640
=>  Start address 40000000
=>  Transfer rate: 520192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm32.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1193/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1183 W:0    | mipstx39/jmr3904: tm33.exe
Result: invalid   
Time: 0:00:00.266560 tm33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm33.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf740 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f740
=>  Loading section .data, size 0x310 lma 40024300
=>  Start address 40000000
=>  Transfer rate: 513536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm33.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1194/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1190 W:0    | mipstx39/jmr3904: tm34.exe
Result: invalid   
Time: 0:00:00.257945 tm34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm34.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa80 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fa80
=>  Loading section .data, size 0x310 lma 40024640
=>  Start address 40000000
=>  Transfer rate: 520192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm34.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1195/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1191 W:0    | mipstx39/jmr3904: tm35.exe
Result: invalid   
Time: 0:00:00.509873 tm35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm35.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf740 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000f740
=>  Loading section .data, size 0x310 lma 40024300
=>  Start address 40000000
=>  Transfer rate: 513536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm35.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1196/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1191 W:0    | mipstx39/jmr3904: tm36.exe
Result: invalid   
Time: 0:00:00.254394 tm36.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tm36.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tm36.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa80 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000fa80
=>  Loading section .data, size 0x310 lma 40024640
=>  Start address 40000000
=>  Transfer rate: 520192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tm36.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1197/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1191 W:0    | mipstx39/jmr3904: tmck.exe
Result: invalid   
Time: 0:00:00.514428 tmck.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tmck.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tmck.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xeb60 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000eb60
=>  Loading section .data, size 0x2e0 lma 40011480
=>  Start address 40000000
=>  Transfer rate: 488832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tmck.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1198/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1191 W:0    | mipstx39/jmr3904: tmcontext01.exe
Result: invalid   
Time: 0:00:00.522017 tmcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tmcontext01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tmcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf0e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f0e0
=>  Loading section .data, size 0x300 lma 40017340
=>  Start address 40000000
=>  Transfer rate: 500480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tmcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1199/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1191 W:0    | mipstx39/jmr3904: tmfine01.exe
Result: invalid   
Time: 0:00:00.517990 tmfine01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tmfine01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tmfine01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c10 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40012c10
=>  Loading section .data, size 0x3a0 lma 40015380
=>  Start address 40000000
=>  Transfer rate: 622976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tmfine01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1200/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1191 W:0    | mipstx39/jmr3904: tmonetoone.exe
Result: invalid   
Time: 0:00:00.519371 tmonetoone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tmonetoone.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tmonetoone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107d0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400107d0
=>  Loading section .data, size 0x340 lma 400134c0
=>  Start address 40000000
=>  Transfer rate: 547968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tmonetoone.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1201/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1191 W:0    | mipstx39/jmr3904: tmtimer01.exe
Result: invalid   
Time: 0:00:00.512199 tmtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/tmtests/tmtimer01.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/tmtests/tmtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xfa90 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000fa90
=>  Loading section .data, size 0x340 lma 40012a00
=>  Start address 40000000
=>  Transfer rate: 520832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/tmtests/tmtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1202/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1192 W:0    | mipstx39/jmr3904: ts-unit-no-clock-0.exe
Result: invalid   
Time: 0:00:00.276876 ts-unit-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/unit/ts-unit-no-clock-0.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/unit/ts-unit-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010f40
=>  Loading section .data, size 0x260 lma 40019600
=>  Start address 40000000
=>  Transfer rate: 561408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/unit/ts-unit-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1203/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1194 W:0    | mipstx39/jmr3904: ts-fatal-init-task-construct-failed.exe
Result: invalid   
Time: 0:00:00.252271 ts-fatal-init-task-construct-failed.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-fatal-init-task-construct-failed.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-fatal-init-task-construct-failed.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xbeb0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000beb0
=>  Loading section .data, size 0x240 lma 4000e500
=>  Start address 40000000
=>  Transfer rate: 396160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-fatal-init-task-construct-failed.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1204/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1194 W:0    | mipstx39/jmr3904: ts-fatal-too-large-tls-size.exe
Result: invalid   
Time: 0:00:00.251808 ts-fatal-too-large-tls-size.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-fatal-too-large-tls-size.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-fatal-too-large-tls-size.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9d40 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40009d40
=>  Loading section .data, size 0x210 lma 4000c0c0
=>  Start address 40000000
=>  Transfer rate: 327296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-fatal-too-large-tls-size.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1205/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1202 W:0    | mipstx39/jmr3904: ts-performance-no-clock-0.exe
Result: invalid   
Time: 0:00:00.263142 ts-performance-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-performance-no-clock-0.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-performance-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15350 lma 40000000
=>  Loading section .rtemsroset, size 0xa0 lma 40015350
=>  Loading section .data, size 0x3d0 lma 4001dd00
=>  Start address 40000000
=>  Transfer rate: 704000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-performance-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1206/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1202 W:0    | mipstx39/jmr3904: ts-terminate.exe
Result: invalid   
Time: 0:00:00.278014 ts-terminate.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-terminate.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-terminate.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf9a0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f9a0
=>  Loading section .data, size 0x230 lma 40017ec0
=>  Start address 40000000
=>  Transfer rate: 516736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-terminate.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1207/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1202 W:0    | mipstx39/jmr3904: ts-userext.exe
Result: invalid   
Time: 0:00:00.253542 ts-userext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-userext.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-userext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11210 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40011210
=>  Loading section .data, size 0x280 lma 400198c0
=>  Start address 40000000
=>  Transfer rate: 567424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-userext.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1208/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1202 W:0    | mipstx39/jmr3904: ts-validation-0.exe
Result: invalid   
Time: 0:00:00.511637 ts-validation-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-0.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x133d0 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 400133d0
=>  Loading section .data, size 0x3b0 lma 4001bac0
=>  Start address 40000000
=>  Transfer rate: 639104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1209/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1202 W:0    | mipstx39/jmr3904: ts-validation-1.exe
Result: invalid   
Time: 0:00:00.253269 ts-validation-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-1.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d0c0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001d0c0
=>  Loading section .data, size 0x280 lma 40025780
=>  Start address 40000000
=>  Transfer rate: 957952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1210/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1202 W:0    | mipstx39/jmr3904: ts-validation-acfg-0.exe
Result: invalid   
Time: 0:00:00.253193 ts-validation-acfg-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-acfg-0.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-acfg-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xd280 lma 40000000
=>  Loading section .rtemsroset, size 0x90 lma 4000d280
=>  Loading section .data, size 0x340 lma 4000f600
=>  Start address 40000000
=>  Transfer rate: 438912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-acfg-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1211/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1202 W:0    | mipstx39/jmr3904: ts-validation-acfg-1.exe
Result: invalid   
Time: 0:00:00.270541 ts-validation-acfg-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-acfg-1.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-acfg-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xbc70 lma 40000000
=>  Loading section .rtemsroset, size 0x70 lma 4000bc70
=>  Loading section .data, size 0x1e0 lma 4000e2c0
=>  Start address 40000000
=>  Transfer rate: 390656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-acfg-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1212/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1202 W:0    | mipstx39/jmr3904: ts-validation-cache.exe
Result: invalid   
Time: 0:00:00.253787 ts-validation-cache.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-cache.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-cache.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf4c0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f4c0
=>  Loading section .data, size 0x260 lma 40017b80
=>  Start address 40000000
=>  Transfer rate: 507136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-cache.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1213/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1210 W:0    | mipstx39/jmr3904: ts-validation-intr.exe
Result: invalid   
Time: 0:00:00.510682 ts-validation-intr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-intr.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-intr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18100 lma 40000000
=>  Loading section .rtemsroset, size 0xb0 lma 40018100
=>  Loading section .data, size 0x450 lma 40020800
=>  Start address 40000000
=>  Transfer rate: 798720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-intr.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1214/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1210 W:0    | mipstx39/jmr3904: ts-validation-io-kernel.exe
Result: invalid   
Time: 0:00:00.254699 ts-validation-io-kernel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-io-kernel.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-io-kernel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x8f40 lma 40000000
=>  Loading section .rtemsroset, size 0x60 lma 40008f40
=>  Loading section .data, size 0x90 lma 4000b280
=>  Start address 40000000
=>  Transfer rate: 295296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-io-kernel.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1215/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1210 W:0    | mipstx39/jmr3904: ts-validation-no-clock-0.exe
Result: invalid   
Time: 0:00:00.510977 ts-validation-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-no-clock-0.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x5b190 lma 40000000
=>  Loading section .rtemsroset, size 0x250 lma 4005b190
=>  Loading section .data, size 0x13a0 lma 40064140
=>  Loading section .rtemsrwset, size 0x4 lma 400654e0
=>  Start address 40000000
=>  Transfer rate: 3030048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1216/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1210 W:0    | mipstx39/jmr3904: ts-validation-non-smp.exe
Result: invalid   
Time: 0:00:00.515869 ts-validation-non-smp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-non-smp.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-non-smp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf100 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4000f100
=>  Loading section .data, size 0x270 lma 400177c0
=>  Start address 40000000
=>  Transfer rate: 499584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-non-smp.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1217/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1210 W:0    | mipstx39/jmr3904: ts-validation-one-cpu-0.exe
Result: invalid   
Time: 0:00:00.521683 ts-validation-one-cpu-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-one-cpu-0.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-one-cpu-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c5b0 lma 40000000
=>  Loading section .rtemsroset, size 0xc0 lma 4001c5b0
=>  Loading section .data, size 0x490 lma 40024e00
=>  Start address 40000000
=>  Transfer rate: 940032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-one-cpu-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1218/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1210 W:0    | mipstx39/jmr3904: ts-validation-one-cpu-1.exe
Result: invalid   
Time: 0:00:00.505189 ts-validation-one-cpu-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-one-cpu-1.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-one-cpu-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bcf0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 4001bcf0
=>  Loading section .data, size 0x270 lma 400243c0
=>  Start address 40000000
=>  Transfer rate: 917248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-one-cpu-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1219/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1210 W:0    | mipstx39/jmr3904: ts-validation-timecounter-0.exe
Result: invalid   
Time: 0:00:00.251824 ts-validation-timecounter-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-timecounter-0.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-timecounter-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x105e0 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 400105e0
=>  Loading section .data, size 0x260 lma 40018cc0
=>  Start address 40000000
=>  Transfer rate: 542208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-timecounter-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1220/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1210 W:0    | mipstx39/jmr3904: ts-validation-timecounter-1.exe
Result: invalid   
Time: 0:00:00.253228 ts-validation-timecounter-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-timecounter-1.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-timecounter-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10f70 lma 40000000
=>  Loading section .rtemsroset, size 0x80 lma 40010f70
=>  Loading section .data, size 0x310 lma 40019640
=>  Start address 40000000
=>  Transfer rate: 563200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-timecounter-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1221/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1211 W:0    | mipstx39/jmr3904: ts-validation-tls-0.exe
Result: invalid   
Time: 0:00:00.251527 ts-validation-tls-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-tls-0.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-tls-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xefb0 lma 40000000
=>  Loading section .tdata, size 0x4 lma 4000f000
=>  Loading section .rtemsroset, size 0x80 lma 4000f100
=>  Loading section .data, size 0x260 lma 400177c0
=>  Start address 40000000
=>  Transfer rate: 496800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-tls-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1222/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1219 W:0    | mipstx39/jmr3904: ts-validation-tls-1.exe
Result: invalid   
Time: 0:00:00.785997 ts-validation-tls-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-tls-1.exe
=>  Reading symbols from ./b-leon2/sparc/leon2/testsuites/validation/ts-validation-tls-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x9d90 lma 40000000
=>  Loading section .tdata, size 0x4 lma 40009e00
=>  Loading section .rtemsroset, size 0x80 lma 40009f00
=>  Loading section .data, size 0x220 lma 4000c280
=>  Start address 40000000
=>  Transfer rate: 328096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-leon2/sparc/leon2/testsuites/validation/ts-validation-tls-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x40000000 at 0x40000000
=>  Program
=>   received signal SIGBUS, Bus error.
=>  trap_table () at ../../../bsps/sparc/shared/start/start.S:114
=>  114	  RTRAP( 0, SYM(hard_reset) );                  ! 00 reset trap
[1223/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1219 W:0    | mipstx39/jmr3904: dhrystone.exe
Result: invalid   
Time: 0:00:00.509866 dhrystone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/benchmarks/dhrystone.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/benchmarks/dhrystone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d01c lma 0
=>  Loading section .init, size 0x40 lma 1d01c
=>  Loading section .fini, size 0x20 lma 1d05c
=>  Loading section .rodata, size 0x2b27 lma 1d080
=>  Loading section .eh_frame_hdr, size 0xf7c lma 1fba8
=>  Loading section .eh_frame, size 0x540c lma 20b24
=>  Loading section .tdata, size 0xc lma 25f30
=>  Loading section .ctors, size 0x8 lma 25f3c
=>  Loading section .dtors, size 0x8 lma 25f44
=>  Loading section .got2, size 0x2c lma 25f4c
=>  Loading section .rtemsroset, size 0x70 lma 25f78
=>  Loading section .data, size 0x504 lma 25fe8
=>  Loading section .sdata, size 0xa9 lma 264f0
=>  Start address 4
=>  Transfer rate: 1256576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/benchmarks/dhrystone.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1224/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1219 W:0    | mipstx39/jmr3904: linpack.exe
Result: invalid   
Time: 0:00:00.757921 linpack.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/benchmarks/linpack.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/benchmarks/linpack.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e280 lma 0
=>  Loading section .init, size 0x40 lma 1e280
=>  Loading section .fini, size 0x20 lma 1e2c0
=>  Loading section .rodata, size 0x288f lma 1e2e0
=>  Loading section .eh_frame_hdr, size 0xf74 lma 20b70
=>  Loading section .eh_frame, size 0x5508 lma 21ae4
=>  Loading section .tdata, size 0xc lma 26fec
=>  Loading section .ctors, size 0x8 lma 26ff8
=>  Loading section .dtors, size 0x8 lma 27000
=>  Loading section .got2, size 0x2c lma 27008
=>  Loading section .rtemsroset, size 0x70 lma 27034
=>  Loading section .data, size 0x508 lma 270a8
=>  Loading section .sdata, size 0xb1 lma 275b0
=>  Start address 4
=>  Transfer rate: 1290976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/benchmarks/linpack.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1225/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1219 W:0    | mipstx39/jmr3904: whetstone.exe
Result: invalid   
Time: 0:00:00.768851 whetstone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/benchmarks/whetstone.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/benchmarks/whetstone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d4d0 lma 0
=>  Loading section .init, size 0x40 lma 1d4d0
=>  Loading section .fini, size 0x20 lma 1d510
=>  Loading section .rodata, size 0x2747 lma 1d530
=>  Loading section .eh_frame_hdr, size 0xfbc lma 1fc78
=>  Loading section .eh_frame, size 0x55b4 lma 20c34
=>  Loading section .tdata, size 0xc lma 261e8
=>  Loading section .ctors, size 0x8 lma 261f4
=>  Loading section .dtors, size 0x8 lma 261fc
=>  Loading section .got2, size 0x2c lma 26204
=>  Loading section .rtemsroset, size 0x70 lma 26230
=>  Loading section .data, size 0x51c lma 262a0
=>  Loading section .sdata, size 0xa9 lma 267c0
=>  Start address 4
=>  Transfer rate: 1262368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/benchmarks/whetstone.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1226/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1219 W:0    | mipstx39/jmr3904: fsbdpart01.exe
Result: invalid   
Time: 0:00:00.771946 fsbdpart01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsbdpart01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsbdpart01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26a88 lma 0
=>  Loading section .init, size 0x40 lma 26a88
=>  Loading section .fini, size 0x20 lma 26ac8
=>  Loading section .rodata, size 0x2def lma 26ae8
=>  Loading section .eh_frame_hdr, size 0x126c lma 298d8
=>  Loading section .eh_frame, size 0x6fa8 lma 2ab44
=>  Loading section .tdata, size 0xc lma 31aec
=>  Loading section .ctors, size 0x8 lma 31af8
=>  Loading section .dtors, size 0x8 lma 31b00
=>  Loading section .got2, size 0x2c lma 31b08
=>  Loading section .rtemsroset, size 0x74 lma 31b34
=>  Loading section .data, size 0x55c lma 31ba8
=>  Loading section .sdata, size 0xb1 lma 32108
=>  Start address 4
=>  Transfer rate: 1641888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsbdpart01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1227/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1219 W:0    | mipstx39/jmr3904: fsclose01.exe
Result: invalid   
Time: 0:00:00.775500 fsclose01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsclose01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsclose01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ea64 lma 0
=>  Loading section .init, size 0x40 lma 1ea64
=>  Loading section .fini, size 0x20 lma 1eaa4
=>  Loading section .rodata, size 0x28db lma 1eac8
=>  Loading section .eh_frame_hdr, size 0x1024 lma 213a4
=>  Loading section .eh_frame, size 0x58e0 lma 223c8
=>  Loading section .tdata, size 0xc lma 27ca8
=>  Loading section .ctors, size 0x8 lma 27cb4
=>  Loading section .dtors, size 0x8 lma 27cbc
=>  Loading section .got2, size 0x2c lma 27cc4
=>  Loading section .rtemsroset, size 0x70 lma 27cf0
=>  Loading section .data, size 0x510 lma 27d60
=>  Loading section .sdata, size 0xa5 lma 28270
=>  Start address 4
=>  Transfer rate: 1316992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsclose01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1228/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1219 W:0    | mipstx39/jmr3904: fsdosfsformat01.exe
Result: invalid   
Time: 0:00:00.772654 fsdosfsformat01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsdosfsformat01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsdosfsformat01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2f7c8 lma 0
=>  Loading section .init, size 0x40 lma 2f7c8
=>  Loading section .fini, size 0x20 lma 2f808
=>  Loading section .rodata, size 0x2f5c lma 2f828
=>  Loading section .eh_frame_hdr, size 0x1464 lma 32784
=>  Loading section .eh_frame, size 0x8380 lma 33be8
=>  Loading section .tdata, size 0x14 lma 3bf68
=>  Loading section .ctors, size 0x8 lma 3bf7c
=>  Loading section .dtors, size 0x8 lma 3bf84
=>  Loading section .got2, size 0x2c lma 3bf8c
=>  Loading section .rtemsroset, size 0x70 lma 3bfb8
=>  Loading section .data, size 0x534 lma 3c028
=>  Loading section .sdata, size 0xb5 lma 3c560
=>  Start address 4
=>  Transfer rate: 1978504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsdosfsformat01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1229/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1219 W:0    | mipstx39/jmr3904: fsdosfsname01.exe
Result: invalid   
Time: 0:00:00.776435 fsdosfsname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsdosfsname01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsdosfsname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x36ad0 lma 0
=>  Loading section .init, size 0x40 lma 36ad0
=>  Loading section .fini, size 0x20 lma 36b10
=>  Loading section .rodata, size 0x121ac4 lma 36b30
=>  Loading section .eh_frame_hdr, size 0x1884 lma 1585f4
=>  Loading section .eh_frame, size 0x9c80 lma 159e78
=>  Loading section .tdata, size 0x14 lma 163af8
=>  Loading section .ctors, size 0x8 lma 163b0c
=>  Loading section .dtors, size 0x8 lma 163b14
=>  Loading section .got2, size 0x2c lma 163b1c
=>  Loading section .rtemsroset, size 0x74 lma 163b48
=>  Loading section .data, size 0x2c428 lma 163bc0
=>  Loading section .sdata, size 0xa9 lma 18ffe8
=>  Start address 4
=>  Transfer rate: 13108328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsdosfsname01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1230/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1220 W:0    | mipstx39/jmr3904: fsdosfsname02.exe
Result: invalid   
Time: 0:00:00.260439 fsdosfsname02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsdosfsname02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsdosfsname02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x298cc lma 0
=>  Loading section .init, size 0x40 lma 298cc
=>  Loading section .fini, size 0x20 lma 2990c
=>  Loading section .rodata, size 0x2c98 lma 29930
=>  Loading section .eh_frame_hdr, size 0x13d4 lma 2c5c8
=>  Loading section .eh_frame, size 0x7e6c lma 2d99c
=>  Loading section .tdata, size 0x14 lma 35808
=>  Loading section .ctors, size 0x8 lma 3581c
=>  Loading section .dtors, size 0x8 lma 35824
=>  Loading section .got2, size 0x2c lma 3582c
=>  Loading section .rtemsroset, size 0x70 lma 35858
=>  Loading section .data, size 0x544 lma 358c8
=>  Loading section .sdata, size 0xa9 lma 35e0c
=>  Start address 4
=>  Transfer rate: 1766792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsdosfsname02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1231/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1227 W:0    | mipstx39/jmr3904: fsdosfssync01.exe
Result: invalid   
Time: 0:00:00.256979 fsdosfssync01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsdosfssync01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsdosfssync01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2ab6c lma 0
=>  Loading section .init, size 0x40 lma 2ab6c
=>  Loading section .fini, size 0x20 lma 2abac
=>  Loading section .rodata, size 0x2be8 lma 2abd0
=>  Loading section .eh_frame_hdr, size 0x146c lma 2d7b8
=>  Loading section .eh_frame, size 0x8134 lma 2ec24
=>  Loading section .tdata, size 0x14 lma 36d58
=>  Loading section .ctors, size 0x8 lma 36d6c
=>  Loading section .dtors, size 0x8 lma 36d74
=>  Loading section .got2, size 0x2c lma 36d7c
=>  Loading section .rtemsroset, size 0x74 lma 36da8
=>  Loading section .data, size 0x55c lma 36e20
=>  Loading section .sdata, size 0xb9 lma 37380
=>  Start address 4
=>  Transfer rate: 1810792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsdosfssync01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1232/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1228 W:0    | mipstx39/jmr3904: fsdosfswrite01.exe
Result: invalid   
Time: 0:00:00.530991 fsdosfswrite01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsdosfswrite01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsdosfswrite01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2c4ec lma 0
=>  Loading section .init, size 0x40 lma 2c4ec
=>  Loading section .fini, size 0x20 lma 2c52c
=>  Loading section .rodata, size 0x2cd8 lma 2c550
=>  Loading section .eh_frame_hdr, size 0x14ac lma 2f228
=>  Loading section .eh_frame, size 0x835c lma 306d4
=>  Loading section .tdata, size 0x14 lma 38a30
=>  Loading section .ctors, size 0x8 lma 38a44
=>  Loading section .dtors, size 0x8 lma 38a4c
=>  Loading section .got2, size 0x2c lma 38a54
=>  Loading section .rtemsroset, size 0x70 lma 38a80
=>  Loading section .data, size 0x534 lma 38af0
=>  Loading section .sdata, size 0xc0 lma 39028
=>  Start address 4
=>  Transfer rate: 1869568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsdosfswrite01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1233/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1228 W:0    | mipstx39/jmr3904: fsfseeko01.exe
Result: invalid   
Time: 0:00:00.273904 fsfseeko01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsfseeko01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsfseeko01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16214 lma 0
=>  Loading section .init, size 0x40 lma 16214
=>  Loading section .fini, size 0x20 lma 16254
=>  Loading section .rodata, size 0x2028 lma 16278
=>  Loading section .eh_frame_hdr, size 0xdcc lma 182a0
=>  Loading section .eh_frame, size 0x487c lma 1906c
=>  Loading section .tdata, size 0xc lma 1d8e8
=>  Loading section .ctors, size 0x8 lma 1d8f4
=>  Loading section .dtors, size 0x8 lma 1d8fc
=>  Loading section .got2, size 0x2c lma 1d904
=>  Loading section .rtemsroset, size 0x70 lma 1d930
=>  Loading section .data, size 0x374 lma 1d9a0
=>  Loading section .sdata, size 0xa9 lma 1dd18
=>  Start address 4
=>  Transfer rate: 978376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsfseeko01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1234/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1228 W:0    | mipstx39/jmr3904: fsimfsconfig01.exe
Result: invalid   
Time: 0:00:00.255061 fsimfsconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsimfsconfig01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsimfsconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x145f4 lma 0
=>  Loading section .init, size 0x40 lma 145f4
=>  Loading section .fini, size 0x20 lma 14634
=>  Loading section .rodata, size 0x203a lma 14658
=>  Loading section .eh_frame_hdr, size 0xcd4 lma 16694
=>  Loading section .eh_frame, size 0x4374 lma 17368
=>  Loading section .ctors, size 0x8 lma 1b6dc
=>  Loading section .dtors, size 0x8 lma 1b6e4
=>  Loading section .got2, size 0x2c lma 1b6ec
=>  Loading section .rtemsroset, size 0x64 lma 1b718
=>  Loading section .data, size 0x30c lma 1b780
=>  Loading section .sdata, size 0x89 lma 1ba8c
=>  Start address 4
=>  Transfer rate: 907352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1235/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1228 W:0    | mipstx39/jmr3904: fsimfsconfig02.exe
Result: invalid   
Time: 0:00:00.268393 fsimfsconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsimfsconfig02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsimfsconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x135f8 lma 0
=>  Loading section .init, size 0x40 lma 135f8
=>  Loading section .fini, size 0x20 lma 13638
=>  Loading section .rodata, size 0x1f88 lma 13658
=>  Loading section .eh_frame_hdr, size 0xc34 lma 155e0
=>  Loading section .eh_frame, size 0x3fb4 lma 16214
=>  Loading section .ctors, size 0x8 lma 1a1c8
=>  Loading section .dtors, size 0x8 lma 1a1d0
=>  Loading section .got2, size 0x2c lma 1a1d8
=>  Loading section .rtemsroset, size 0x6c lma 1a204
=>  Loading section .data, size 0x34c lma 1a270
=>  Loading section .sdata, size 0x91 lma 1a5bc
=>  Start address 4
=>  Transfer rate: 864872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1236/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1228 W:0    | mipstx39/jmr3904: fsimfsconfig03.exe
Result: invalid   
Time: 0:00:00.268896 fsimfsconfig03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsimfsconfig03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsimfsconfig03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14508 lma 0
=>  Loading section .init, size 0x40 lma 14508
=>  Loading section .fini, size 0x20 lma 14548
=>  Loading section .rodata, size 0x1fb8 lma 14568
=>  Loading section .eh_frame_hdr, size 0xccc lma 16520
=>  Loading section .eh_frame, size 0x42e8 lma 171ec
=>  Loading section .ctors, size 0x8 lma 1b4d4
=>  Loading section .dtors, size 0x8 lma 1b4dc
=>  Loading section .got2, size 0x2c lma 1b4e4
=>  Loading section .rtemsroset, size 0x64 lma 1b510
=>  Loading section .data, size 0x308 lma 1b578
=>  Loading section .sdata, size 0x89 lma 1b880
=>  Start address 4
=>  Transfer rate: 903208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsconfig03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1237/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1228 W:0    | mipstx39/jmr3904: fsimfsgeneric01.exe
Result: invalid   
Time: 0:00:00.305135 fsimfsgeneric01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16d54 lma 0
=>  Loading section .init, size 0x40 lma 16d54
=>  Loading section .fini, size 0x20 lma 16d94
=>  Loading section .rodata, size 0x2324 lma 16db8
=>  Loading section .eh_frame_hdr, size 0xe3c lma 190dc
=>  Loading section .eh_frame, size 0x49a4 lma 19f18
=>  Loading section .ctors, size 0x8 lma 1e8bc
=>  Loading section .dtors, size 0x8 lma 1e8c4
=>  Loading section .got2, size 0x2c lma 1e8cc
=>  Loading section .rtemsroset, size 0x70 lma 1e8f8
=>  Loading section .data, size 0x398 lma 1e968
=>  Loading section .sdata, size 0xd0 lma 1ed00
=>  Start address 4
=>  Transfer rate: 1011296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1238/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1228 W:0    | mipstx39/jmr3904: fsjffs2gc01.exe
Result: invalid   
Time: 0:00:00.315110 fsjffs2gc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsjffs2gc01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsjffs2gc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23d78 lma 0
=>  Loading section .init, size 0x40 lma 23d78
=>  Loading section .fini, size 0x20 lma 23db8
=>  Loading section .rodata, size 0x57f4 lma 23dd8
=>  Loading section .eh_frame_hdr, size 0x11ec lma 295cc
=>  Loading section .eh_frame, size 0x6b88 lma 2a7b8
=>  Loading section .ctors, size 0x8 lma 31340
=>  Loading section .dtors, size 0x8 lma 31348
=>  Loading section .got2, size 0x2c lma 31350
=>  Loading section .rtemsroset, size 0x74 lma 3137c
=>  Loading section .data, size 0x21408 lma 313f0
=>  Loading section .sdata, size 0xbd lma 527f8
=>  Start address 4
=>  Transfer rate: 2704808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsjffs2gc01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1239/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1234 W:0    | mipstx39/jmr3904: fsnofs01.exe
Result: invalid   
Time: 0:00:00.529648 fsnofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsnofs01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsnofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ff8 lma 0
=>  Loading section .init, size 0x40 lma 12ff8
=>  Loading section .fini, size 0x20 lma 13038
=>  Loading section .rodata, size 0x24ec lma 13058
=>  Loading section .eh_frame_hdr, size 0xa9c lma 15544
=>  Loading section .eh_frame, size 0x37e8 lma 15fe0
=>  Loading section .ctors, size 0x8 lma 197c8
=>  Loading section .dtors, size 0x8 lma 197d0
=>  Loading section .got2, size 0x2c lma 197d8
=>  Loading section .rtemsroset, size 0x68 lma 19804
=>  Loading section .data, size 0x348 lma 19870
=>  Loading section .sdata, size 0x8d lma 19bb8
=>  Start address 4
=>  Transfer rate: 844296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsnofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1240/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1232 W:0    | mipstx39/jmr3904: fsrfsbitmap01.exe
Result: invalid   
Time: 0:00:00.503865 fsrfsbitmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsrfsbitmap01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsrfsbitmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x269cc lma 0
=>  Loading section .init, size 0x40 lma 269cc
=>  Loading section .fini, size 0x20 lma 26a0c
=>  Loading section .rodata, size 0x5cdc lma 26a30
=>  Loading section .eh_frame_hdr, size 0x139c lma 2c70c
=>  Loading section .eh_frame, size 0x7628 lma 2daa8
=>  Loading section .tdata, size 0x8 lma 350d0
=>  Loading section .ctors, size 0x8 lma 350d8
=>  Loading section .dtors, size 0x8 lma 350e0
=>  Loading section .got2, size 0x2c lma 350e8
=>  Loading section .rtemsroset, size 0x74 lma 35114
=>  Loading section .data, size 0x3e0 lma 35188
=>  Loading section .sdata, size 0xb1 lma 35568
=>  Start address 4
=>  Transfer rate: 1749160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsrfsbitmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1241/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1232 W:0    | mipstx39/jmr3904: fsrofs01.exe
Result: invalid   
Time: 0:00:00.526511 fsrofs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsrofs01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsrofs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x253b4 lma 0
=>  Loading section .init, size 0x40 lma 253b4
=>  Loading section .fini, size 0x20 lma 253f4
=>  Loading section .rodata, size 0x51dc lma 25418
=>  Loading section .eh_frame_hdr, size 0x134c lma 2a5f4
=>  Loading section .eh_frame, size 0x749c lma 2b940
=>  Loading section .ctors, size 0x8 lma 32ddc
=>  Loading section .dtors, size 0x8 lma 32de4
=>  Loading section .got2, size 0x2c lma 32dec
=>  Loading section .rtemsroset, size 0x74 lma 32e18
=>  Loading section .data, size 0x3b4 lma 32e90
=>  Loading section .sdata, size 0xb9 lma 33248
=>  Start address 4
=>  Transfer rate: 1677224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsrofs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1242/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1232 W:0    | mipstx39/jmr3904: imfs_fserror.exe
Result: invalid   
Time: 0:00:00.514191 imfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/imfs_fserror.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/imfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c880 lma 0
=>  Loading section .init, size 0x40 lma 1c880
=>  Loading section .fini, size 0x20 lma 1c8c0
=>  Loading section .rodata, size 0x2a8b lma 1c8e0
=>  Loading section .eh_frame_hdr, size 0xe2c lma 1f36c
=>  Loading section .eh_frame, size 0x4c6c lma 20198
=>  Loading section .ctors, size 0x8 lma 24e04
=>  Loading section .dtors, size 0x8 lma 24e0c
=>  Loading section .got2, size 0x2c lma 24e14
=>  Loading section .rtemsroset, size 0x74 lma 24e40
=>  Loading section .data, size 0x508 lma 24eb8
=>  Loading section .sdata, size 0xa5 lma 253c0
=>  Start address 4
=>  Transfer rate: 1221376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1243/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1235 W:0    | mipstx39/jmr3904: imfs_fslink.exe
Result: invalid   
Time: 0:00:00.519546 imfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/imfs_fslink.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/imfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x150f8 lma 0
=>  Loading section .init, size 0x40 lma 150f8
=>  Loading section .fini, size 0x20 lma 15138
=>  Loading section .rodata, size 0x2154 lma 15158
=>  Loading section .eh_frame_hdr, size 0xd0c lma 172ac
=>  Loading section .eh_frame, size 0x43f8 lma 17fb8
=>  Loading section .ctors, size 0x8 lma 1c3b0
=>  Loading section .dtors, size 0x8 lma 1c3b8
=>  Loading section .got2, size 0x2c lma 1c3c0
=>  Loading section .rtemsroset, size 0x74 lma 1c3ec
=>  Loading section .data, size 0x39c lma 1c460
=>  Loading section .sdata, size 0xa5 lma 1c800
=>  Start address 4
=>  Transfer rate: 935176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1244/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1235 W:0    | mipstx39/jmr3904: imfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.504769 imfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/imfs_fspatheval.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/imfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15ad4 lma 0
=>  Loading section .init, size 0x40 lma 15ad4
=>  Loading section .fini, size 0x20 lma 15b14
=>  Loading section .rodata, size 0x22e8 lma 15b38
=>  Loading section .eh_frame_hdr, size 0xd6c lma 17e20
=>  Loading section .eh_frame, size 0x475c lma 18b8c
=>  Loading section .ctors, size 0x8 lma 1d2e8
=>  Loading section .dtors, size 0x8 lma 1d2f0
=>  Loading section .got2, size 0x2c lma 1d2f8
=>  Loading section .rtemsroset, size 0x74 lma 1d324
=>  Loading section .data, size 0x39c lma 1d398
=>  Loading section .sdata, size 0xa5 lma 1d738
=>  Start address 4
=>  Transfer rate: 966312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1245/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1235 W:0    | mipstx39/jmr3904: imfs_fspermission.exe
Result: invalid   
Time: 0:00:00.506640 imfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/imfs_fspermission.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/imfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d204 lma 0
=>  Loading section .init, size 0x40 lma 1d204
=>  Loading section .fini, size 0x20 lma 1d244
=>  Loading section .rodata, size 0x2923 lma 1d268
=>  Loading section .eh_frame_hdr, size 0xe8c lma 1fb8c
=>  Loading section .eh_frame, size 0x4ecc lma 20a18
=>  Loading section .ctors, size 0x8 lma 258e4
=>  Loading section .dtors, size 0x8 lma 258ec
=>  Loading section .got2, size 0x2c lma 258f4
=>  Loading section .rtemsroset, size 0x74 lma 25920
=>  Loading section .data, size 0x508 lma 25998
=>  Loading section .sdata, size 0xa5 lma 25ea0
=>  Start address 4
=>  Transfer rate: 1243616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1246/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1236 W:0    | mipstx39/jmr3904: imfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.275531 imfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/imfs_fsrdwr.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/imfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17a04 lma 0
=>  Loading section .init, size 0x40 lma 17a04
=>  Loading section .fini, size 0x20 lma 17a44
=>  Loading section .rodata, size 0x25d8 lma 17a68
=>  Loading section .eh_frame_hdr, size 0xd54 lma 1a040
=>  Loading section .eh_frame, size 0x4558 lma 1ad94
=>  Loading section .ctors, size 0x8 lma 1f2ec
=>  Loading section .dtors, size 0x8 lma 1f2f4
=>  Loading section .got2, size 0x2c lma 1f2fc
=>  Loading section .rtemsroset, size 0x74 lma 1f328
=>  Loading section .data, size 0x39c lma 1f3a0
=>  Loading section .sdata, size 0xb5 lma 1f740
=>  Start address 4
=>  Transfer rate: 1032008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1247/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1242 W:0    | mipstx39/jmr3904: imfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.255148 imfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/imfs_fsscandir01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/imfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15de4 lma 0
=>  Loading section .init, size 0x40 lma 15de4
=>  Loading section .fini, size 0x20 lma 15e24
=>  Loading section .rodata, size 0x2168 lma 15e48
=>  Loading section .eh_frame_hdr, size 0xd34 lma 17fb0
=>  Loading section .eh_frame, size 0x4580 lma 18ce4
=>  Loading section .ctors, size 0x8 lma 1d264
=>  Loading section .dtors, size 0x8 lma 1d26c
=>  Loading section .got2, size 0x2c lma 1d274
=>  Loading section .rtemsroset, size 0x74 lma 1d2a0
=>  Loading section .data, size 0x3a0 lma 1d318
=>  Loading section .sdata, size 0xa9 lma 1d6b8
=>  Start address 4
=>  Transfer rate: 965320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1248/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1244 W:0    | mipstx39/jmr3904: imfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.285872 imfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/imfs_fssymlink.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/imfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x155dc lma 0
=>  Loading section .init, size 0x40 lma 155dc
=>  Loading section .fini, size 0x20 lma 1561c
=>  Loading section .rodata, size 0x22b0 lma 15640
=>  Loading section .eh_frame_hdr, size 0xd34 lma 178f0
=>  Loading section .eh_frame, size 0x4474 lma 18624
=>  Loading section .ctors, size 0x8 lma 1ca98
=>  Loading section .dtors, size 0x8 lma 1caa0
=>  Loading section .got2, size 0x2c lma 1caa8
=>  Loading section .rtemsroset, size 0x74 lma 1cad4
=>  Loading section .data, size 0x39c lma 1cb48
=>  Loading section .sdata, size 0xa5 lma 1cee8
=>  Start address 4
=>  Transfer rate: 949288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1249/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1244 W:0    | mipstx39/jmr3904: imfs_fstime.exe
Result: invalid   
Time: 0:00:00.512928 imfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/imfs_fstime.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/imfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16640 lma 0
=>  Loading section .init, size 0x40 lma 16640
=>  Loading section .fini, size 0x20 lma 16680
=>  Loading section .rodata, size 0x228e lma 166a0
=>  Loading section .eh_frame_hdr, size 0xdac lma 18930
=>  Loading section .eh_frame, size 0x4738 lma 196dc
=>  Loading section .ctors, size 0x8 lma 1de14
=>  Loading section .dtors, size 0x8 lma 1de1c
=>  Loading section .got2, size 0x2c lma 1de24
=>  Loading section .rtemsroset, size 0x74 lma 1de50
=>  Loading section .data, size 0x3a8 lma 1dec8
=>  Loading section .sdata, size 0xa5 lma 1e270
=>  Start address 4
=>  Transfer rate: 989304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1250/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1244 W:0    | mipstx39/jmr3904: jffs2_fserror.exe
Result: invalid   
Time: 0:00:00.509236 jffs2_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fserror.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2b5c4 lma 0
=>  Loading section .init, size 0x40 lma 2b5c4
=>  Loading section .fini, size 0x20 lma 2b604
=>  Loading section .rodata, size 0x5e49 lma 2b628
=>  Loading section .eh_frame_hdr, size 0x131c lma 31474
=>  Loading section .eh_frame, size 0x7460 lma 32790
=>  Loading section .ctors, size 0x8 lma 39bf0
=>  Loading section .dtors, size 0x8 lma 39bf8
=>  Loading section .got2, size 0x2c lma 39c00
=>  Loading section .rtemsroset, size 0x74 lma 39c2c
=>  Loading section .data, size 0x21574 lma 39ca0
=>  Loading section .sdata, size 0xb5 lma 5b218
=>  Start address 4
=>  Transfer rate: 2987536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1251/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1244 W:0    | mipstx39/jmr3904: jffs2_fslink.exe
Result: invalid   
Time: 0:00:00.515063 jffs2_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fslink.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23ea8 lma 0
=>  Loading section .init, size 0x40 lma 23ea8
=>  Loading section .fini, size 0x20 lma 23ee8
=>  Loading section .rodata, size 0x5554 lma 23f08
=>  Loading section .eh_frame_hdr, size 0x1204 lma 2945c
=>  Loading section .eh_frame, size 0x6c04 lma 2a660
=>  Loading section .ctors, size 0x8 lma 31264
=>  Loading section .dtors, size 0x8 lma 3126c
=>  Loading section .got2, size 0x2c lma 31274
=>  Loading section .rtemsroset, size 0x74 lma 312a0
=>  Loading section .data, size 0x21408 lma 31318
=>  Loading section .sdata, size 0xb5 lma 52720
=>  Start address 4
=>  Transfer rate: 2702984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1252/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1244 W:0    | mipstx39/jmr3904: jffs2_fspatheval.exe
Result: invalid   
Time: 0:00:00.519560 jffs2_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fspatheval.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24884 lma 0
=>  Loading section .init, size 0x40 lma 24884
=>  Loading section .fini, size 0x20 lma 248c4
=>  Loading section .rodata, size 0x56e0 lma 248e8
=>  Loading section .eh_frame_hdr, size 0x1264 lma 29fc8
=>  Loading section .eh_frame, size 0x6f68 lma 2b22c
=>  Loading section .ctors, size 0x8 lma 32194
=>  Loading section .dtors, size 0x8 lma 3219c
=>  Loading section .got2, size 0x2c lma 321a4
=>  Loading section .rtemsroset, size 0x74 lma 321d0
=>  Loading section .data, size 0x21408 lma 32248
=>  Loading section .sdata, size 0xb5 lma 53650
=>  Start address 4
=>  Transfer rate: 2734056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1253/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1244 W:0    | mipstx39/jmr3904: jffs2_fspermission.exe
Result: invalid   
Time: 0:00:00.252767 jffs2_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fspermission.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2bf48 lma 0
=>  Loading section .init, size 0x40 lma 2bf48
=>  Loading section .fini, size 0x20 lma 2bf88
=>  Loading section .rodata, size 0x5ce1 lma 2bfa8
=>  Loading section .eh_frame_hdr, size 0x137c lma 31c8c
=>  Loading section .eh_frame, size 0x76c0 lma 33008
=>  Loading section .ctors, size 0x8 lma 3a6c8
=>  Loading section .dtors, size 0x8 lma 3a6d0
=>  Loading section .got2, size 0x2c lma 3a6d8
=>  Loading section .rtemsroset, size 0x74 lma 3a704
=>  Loading section .data, size 0x21574 lma 3a778
=>  Loading section .sdata, size 0xb5 lma 5bcf0
=>  Start address 4
=>  Transfer rate: 3009776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1254/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1244 W:0    | mipstx39/jmr3904: jffs2_fsrdwr.exe
Result: invalid   
Time: 0:00:00.503344 jffs2_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrdwr.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26708 lma 0
=>  Loading section .init, size 0x40 lma 26708
=>  Loading section .fini, size 0x20 lma 26748
=>  Loading section .rodata, size 0x59d0 lma 26768
=>  Loading section .eh_frame_hdr, size 0x1244 lma 2c138
=>  Loading section .eh_frame, size 0x6d50 lma 2d37c
=>  Loading section .ctors, size 0x8 lma 340cc
=>  Loading section .dtors, size 0x8 lma 340d4
=>  Loading section .got2, size 0x2c lma 340dc
=>  Loading section .rtemsroset, size 0x74 lma 34108
=>  Loading section .data, size 0x21408 lma 34180
=>  Loading section .sdata, size 0xc5 lma 55588
=>  Start address 4
=>  Transfer rate: 2798152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1255/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1247 W:0    | mipstx39/jmr3904: jffs2_fsscandir01.exe
Result: invalid   
Time: 0:00:00.283239 jffs2_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fsscandir01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24b94 lma 0
=>  Loading section .init, size 0x40 lma 24b94
=>  Loading section .fini, size 0x20 lma 24bd4
=>  Loading section .rodata, size 0x5568 lma 24bf8
=>  Loading section .eh_frame_hdr, size 0x122c lma 2a160
=>  Loading section .eh_frame, size 0x6d8c lma 2b38c
=>  Loading section .ctors, size 0x8 lma 32118
=>  Loading section .dtors, size 0x8 lma 32120
=>  Loading section .got2, size 0x2c lma 32128
=>  Loading section .rtemsroset, size 0x74 lma 32154
=>  Loading section .data, size 0x2140c lma 321c8
=>  Loading section .sdata, size 0xb9 lma 535d8
=>  Start address 4
=>  Transfer rate: 2733128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1256/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1246 W:0    | mipstx39/jmr3904: jffs2_fssymlink.exe
Result: invalid   
Time: 0:00:00.265420 jffs2_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fssymlink.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x242c0 lma 0
=>  Loading section .init, size 0x40 lma 242c0
=>  Loading section .fini, size 0x20 lma 24300
=>  Loading section .rodata, size 0x56b0 lma 24320
=>  Loading section .eh_frame_hdr, size 0x1224 lma 299d0
=>  Loading section .eh_frame, size 0x6c6c lma 2abf4
=>  Loading section .ctors, size 0x8 lma 31860
=>  Loading section .dtors, size 0x8 lma 31868
=>  Loading section .got2, size 0x2c lma 31870
=>  Loading section .rtemsroset, size 0x74 lma 3189c
=>  Loading section .data, size 0x21408 lma 31910
=>  Loading section .sdata, size 0xb5 lma 52d18
=>  Start address 4
=>  Transfer rate: 2715240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1257/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1251 W:0    | mipstx39/jmr3904: jffs2_fstime.exe
Result: invalid   
Time: 0:00:00.255999 jffs2_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fstime.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/jffs2_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x253f0 lma 0
=>  Loading section .init, size 0x40 lma 253f0
=>  Loading section .fini, size 0x20 lma 25430
=>  Loading section .rodata, size 0x568e lma 25450
=>  Loading section .eh_frame_hdr, size 0x12a4 lma 2aae0
=>  Loading section .eh_frame, size 0x6f44 lma 2bd84
=>  Loading section .ctors, size 0x8 lma 32cc8
=>  Loading section .dtors, size 0x8 lma 32cd0
=>  Loading section .got2, size 0x2c lma 32cd8
=>  Loading section .rtemsroset, size 0x74 lma 32d04
=>  Loading section .data, size 0x21414 lma 32d78
=>  Loading section .sdata, size 0xb5 lma 54190
=>  Start address 4
=>  Transfer rate: 2757112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1258/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1252 W:0    | mipstx39/jmr3904: mdosfs_fserror.exe
Result: invalid   
Time: 0:00:00.509327 mdosfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fserror.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2ff80 lma 0
=>  Loading section .init, size 0x40 lma 2ff80
=>  Loading section .fini, size 0x20 lma 2ffc0
=>  Loading section .rodata, size 0x33dc lma 2ffe0
=>  Loading section .eh_frame_hdr, size 0x1554 lma 333bc
=>  Loading section .eh_frame, size 0x86cc lma 34910
=>  Loading section .tdata, size 0x14 lma 3cfe0
=>  Loading section .ctors, size 0x8 lma 3cff4
=>  Loading section .dtors, size 0x8 lma 3cffc
=>  Loading section .got2, size 0x2c lma 3d004
=>  Loading section .rtemsroset, size 0x74 lma 3d030
=>  Loading section .data, size 0x59c lma 3d0a8
=>  Loading section .sdata, size 0xb5 lma 3d648
=>  Start address 4
=>  Transfer rate: 2013064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mdosfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1259/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1252 W:0    | mipstx39/jmr3904: mdosfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.518568 mdosfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fspatheval.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2c0b8 lma 0
=>  Loading section .init, size 0x40 lma 2c0b8
=>  Loading section .fini, size 0x20 lma 2c0f8
=>  Loading section .rodata, size 0x2fc0 lma 2c118
=>  Loading section .eh_frame_hdr, size 0x1564 lma 2f0d8
=>  Loading section .eh_frame, size 0x86e8 lma 3063c
=>  Loading section .tdata, size 0x14 lma 38d28
=>  Loading section .ctors, size 0x8 lma 38d3c
=>  Loading section .dtors, size 0x8 lma 38d44
=>  Loading section .got2, size 0x2c lma 38d4c
=>  Loading section .rtemsroset, size 0x74 lma 38d78
=>  Loading section .data, size 0x59c lma 38df0
=>  Loading section .sdata, size 0xb5 lma 39390
=>  Start address 4
=>  Transfer rate: 1876424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mdosfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1260/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1254 W:0    | mipstx39/jmr3904: mdosfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.623619 mdosfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsrdwr.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2e2d4 lma 0
=>  Loading section .init, size 0x40 lma 2e2d4
=>  Loading section .fini, size 0x20 lma 2e314
=>  Loading section .rodata, size 0x32b0 lma 2e338
=>  Loading section .eh_frame_hdr, size 0x155c lma 315e8
=>  Loading section .eh_frame, size 0x8580 lma 32b44
=>  Loading section .tdata, size 0x14 lma 3b0c8
=>  Loading section .ctors, size 0x8 lma 3b0dc
=>  Loading section .dtors, size 0x8 lma 3b0e4
=>  Loading section .got2, size 0x2c lma 3b0ec
=>  Loading section .rtemsroset, size 0x74 lma 3b118
=>  Loading section .data, size 0x59c lma 3b190
=>  Loading section .sdata, size 0xc5 lma 3b730
=>  Start address 4
=>  Transfer rate: 1949480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1261/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1254 W:0    | mipstx39/jmr3904: mdosfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.503510 mdosfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsscandir01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2c91c lma 0
=>  Loading section .init, size 0x40 lma 2c91c
=>  Loading section .fini, size 0x20 lma 2c95c
=>  Loading section .rodata, size 0x2e40 lma 2c980
=>  Loading section .eh_frame_hdr, size 0x1554 lma 2f7c0
=>  Loading section .eh_frame, size 0x85f0 lma 30d14
=>  Loading section .tdata, size 0x14 lma 39308
=>  Loading section .ctors, size 0x8 lma 3931c
=>  Loading section .dtors, size 0x8 lma 39324
=>  Loading section .got2, size 0x2c lma 3932c
=>  Loading section .rtemsroset, size 0x74 lma 39358
=>  Loading section .data, size 0x5a0 lma 393d0
=>  Loading section .sdata, size 0xb9 lma 39970
=>  Start address 4
=>  Transfer rate: 1888488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1262/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1254 W:0    | mipstx39/jmr3904: mdosfs_fsstatvfs.exe
Result: invalid   
Time: 0:00:00.514559 mdosfs_fsstatvfs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsstatvfs.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsstatvfs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2b664 lma 0
=>  Loading section .init, size 0x40 lma 2b664
=>  Loading section .fini, size 0x20 lma 2b6a4
=>  Loading section .rodata, size 0x2f90 lma 2b6c8
=>  Loading section .eh_frame_hdr, size 0x150c lma 2e658
=>  Loading section .eh_frame, size 0x842c lma 2fb64
=>  Loading section .tdata, size 0x14 lma 37f90
=>  Loading section .ctors, size 0x8 lma 37fa4
=>  Loading section .dtors, size 0x8 lma 37fac
=>  Loading section .got2, size 0x2c lma 37fb4
=>  Loading section .rtemsroset, size 0x74 lma 37fe0
=>  Loading section .data, size 0x59c lma 38058
=>  Loading section .sdata, size 0xb5 lma 385f8
=>  Start address 4
=>  Transfer rate: 1848584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsstatvfs.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1263/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1254 W:0    | mipstx39/jmr3904: mdosfs_fstime.exe
Result: invalid   
Time: 0:00:00.556931 mdosfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fstime.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mdosfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2cf7c lma 0
=>  Loading section .init, size 0x40 lma 2cf7c
=>  Loading section .fini, size 0x20 lma 2cfbc
=>  Loading section .rodata, size 0x2f52 lma 2cfe0
=>  Loading section .eh_frame_hdr, size 0x15a4 lma 2ff34
=>  Loading section .eh_frame, size 0x8758 lma 314d8
=>  Loading section .tdata, size 0x14 lma 39c30
=>  Loading section .ctors, size 0x8 lma 39c44
=>  Loading section .dtors, size 0x8 lma 39c4c
=>  Loading section .got2, size 0x2c lma 39c54
=>  Loading section .rtemsroset, size 0x74 lma 39c80
=>  Loading section .data, size 0x5a8 lma 39cf8
=>  Loading section .sdata, size 0xb5 lma 3a2a0
=>  Start address 4
=>  Transfer rate: 1907288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mdosfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1264/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1254 W:0    | mipstx39/jmr3904: mimfs_fserror.exe
Result: invalid   
Time: 0:00:00.529180 mimfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d480 lma 0
=>  Loading section .init, size 0x40 lma 1d480
=>  Loading section .fini, size 0x20 lma 1d4c0
=>  Loading section .rodata, size 0x2bb3 lma 1d4e0
=>  Loading section .eh_frame_hdr, size 0xebc lma 20094
=>  Loading section .eh_frame, size 0x4f6c lma 20f50
=>  Loading section .ctors, size 0x8 lma 25ebc
=>  Loading section .dtors, size 0x8 lma 25ec4
=>  Loading section .got2, size 0x2c lma 25ecc
=>  Loading section .rtemsroset, size 0x74 lma 25ef8
=>  Loading section .data, size 0x538 lma 25f70
=>  Loading section .sdata, size 0xa5 lma 264a8
=>  Start address 4
=>  Transfer rate: 1256000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1265/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1255 W:0    | mipstx39/jmr3904: mimfs_fslink.exe
Result: invalid   
Time: 0:00:00.297692 mimfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fslink.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15cf8 lma 0
=>  Loading section .init, size 0x40 lma 15cf8
=>  Loading section .fini, size 0x20 lma 15d38
=>  Loading section .rodata, size 0x2278 lma 15d58
=>  Loading section .eh_frame_hdr, size 0xd9c lma 17fd0
=>  Loading section .eh_frame, size 0x46f8 lma 18d6c
=>  Loading section .ctors, size 0x8 lma 1d464
=>  Loading section .dtors, size 0x8 lma 1d46c
=>  Loading section .got2, size 0x2c lma 1d474
=>  Loading section .rtemsroset, size 0x74 lma 1d4a0
=>  Loading section .data, size 0x3cc lma 1d518
=>  Loading section .sdata, size 0xa5 lma 1d8e8
=>  Start address 4
=>  Transfer rate: 969768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1266/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1258 W:0    | mipstx39/jmr3904: mimfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.283514 mimfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fspatheval.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x166d4 lma 0
=>  Loading section .init, size 0x40 lma 166d4
=>  Loading section .fini, size 0x20 lma 16714
=>  Loading section .rodata, size 0x240c lma 16738
=>  Loading section .eh_frame_hdr, size 0xdfc lma 18b44
=>  Loading section .eh_frame, size 0x4a5c lma 19940
=>  Loading section .ctors, size 0x8 lma 1e39c
=>  Loading section .dtors, size 0x8 lma 1e3a4
=>  Loading section .got2, size 0x2c lma 1e3ac
=>  Loading section .rtemsroset, size 0x74 lma 1e3d8
=>  Loading section .data, size 0x3cc lma 1e450
=>  Loading section .sdata, size 0xa5 lma 1e820
=>  Start address 4
=>  Transfer rate: 1000904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1267/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1258 W:0    | mipstx39/jmr3904: mimfs_fspermission.exe
Result: invalid   
Time: 0:00:00.517855 mimfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fspermission.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1de04 lma 0
=>  Loading section .init, size 0x40 lma 1de04
=>  Loading section .fini, size 0x20 lma 1de44
=>  Loading section .rodata, size 0x2a53 lma 1de68
=>  Loading section .eh_frame_hdr, size 0xf1c lma 208bc
=>  Loading section .eh_frame, size 0x51cc lma 217d8
=>  Loading section .ctors, size 0x8 lma 269a4
=>  Loading section .dtors, size 0x8 lma 269ac
=>  Loading section .got2, size 0x2c lma 269b4
=>  Loading section .rtemsroset, size 0x74 lma 269e0
=>  Loading section .data, size 0x538 lma 26a58
=>  Loading section .sdata, size 0xa5 lma 26f90
=>  Start address 4
=>  Transfer rate: 1278304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1268/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1258 W:0    | mipstx39/jmr3904: mimfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.254811 mimfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrdwr.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18624 lma 0
=>  Loading section .init, size 0x40 lma 18624
=>  Loading section .fini, size 0x20 lma 18664
=>  Loading section .rodata, size 0x26fc lma 18688
=>  Loading section .eh_frame_hdr, size 0xde4 lma 1ad84
=>  Loading section .eh_frame, size 0x4858 lma 1bb68
=>  Loading section .ctors, size 0x8 lma 203c0
=>  Loading section .dtors, size 0x8 lma 203c8
=>  Loading section .got2, size 0x2c lma 203d0
=>  Loading section .rtemsroset, size 0x74 lma 203fc
=>  Loading section .data, size 0x3cc lma 20470
=>  Loading section .sdata, size 0xb5 lma 20840
=>  Start address 4
=>  Transfer rate: 1066856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1269/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1263 W:0    | mipstx39/jmr3904: mimfs_fsrename.exe
Result: invalid   
Time: 0:00:00.255214 mimfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrename.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21078 lma 0
=>  Loading section .init, size 0x40 lma 21078
=>  Loading section .fini, size 0x20 lma 210b8
=>  Loading section .rodata, size 0x30d3 lma 210d8
=>  Loading section .eh_frame_hdr, size 0xefc lma 241ac
=>  Loading section .eh_frame, size 0x5160 lma 250a8
=>  Loading section .ctors, size 0x8 lma 2a208
=>  Loading section .dtors, size 0x8 lma 2a210
=>  Loading section .got2, size 0x2c lma 2a218
=>  Loading section .rtemsroset, size 0x74 lma 2a244
=>  Loading section .data, size 0x538 lma 2a2b8
=>  Loading section .sdata, size 0xa5 lma 2a7f0
=>  Start address 4
=>  Transfer rate: 1393824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1270/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1264 W:0    | mipstx39/jmr3904: mimfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.257413 mimfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fsscandir01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x169e4 lma 0
=>  Loading section .init, size 0x40 lma 169e4
=>  Loading section .fini, size 0x20 lma 16a24
=>  Loading section .rodata, size 0x2294 lma 16a48
=>  Loading section .eh_frame_hdr, size 0xdc4 lma 18cdc
=>  Loading section .eh_frame, size 0x4880 lma 19aa0
=>  Loading section .ctors, size 0x8 lma 1e320
=>  Loading section .dtors, size 0x8 lma 1e328
=>  Loading section .got2, size 0x2c lma 1e330
=>  Loading section .rtemsroset, size 0x74 lma 1e35c
=>  Loading section .data, size 0x3d0 lma 1e3d0
=>  Loading section .sdata, size 0xa9 lma 1e7a0
=>  Start address 4
=>  Transfer rate: 999976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1271/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1265 W:0    | mipstx39/jmr3904: mimfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.520375 mimfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fssymlink.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x161dc lma 0
=>  Loading section .init, size 0x40 lma 161dc
=>  Loading section .fini, size 0x20 lma 1621c
=>  Loading section .rodata, size 0x23dc lma 16240
=>  Loading section .eh_frame_hdr, size 0xdc4 lma 1861c
=>  Loading section .eh_frame, size 0x4774 lma 193e0
=>  Loading section .ctors, size 0x8 lma 1db54
=>  Loading section .dtors, size 0x8 lma 1db5c
=>  Loading section .got2, size 0x2c lma 1db64
=>  Loading section .rtemsroset, size 0x74 lma 1db90
=>  Loading section .data, size 0x3cc lma 1dc08
=>  Loading section .sdata, size 0xa5 lma 1dfd8
=>  Start address 4
=>  Transfer rate: 983944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1272/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1264 W:0    | mipstx39/jmr3904: mimfs_fstime.exe
Result: invalid   
Time: 0:00:00.530675 mimfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fstime.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mimfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17240 lma 0
=>  Loading section .init, size 0x40 lma 17240
=>  Loading section .fini, size 0x20 lma 17280
=>  Loading section .rodata, size 0x23b2 lma 172a0
=>  Loading section .eh_frame_hdr, size 0xe3c lma 19654
=>  Loading section .eh_frame, size 0x4a38 lma 1a490
=>  Loading section .ctors, size 0x8 lma 1eec8
=>  Loading section .dtors, size 0x8 lma 1eed0
=>  Loading section .got2, size 0x2c lma 1eed8
=>  Loading section .rtemsroset, size 0x74 lma 1ef04
=>  Loading section .data, size 0x3d8 lma 1ef78
=>  Loading section .sdata, size 0xa5 lma 1f350
=>  Start address 4
=>  Transfer rate: 1023896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1273/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1265 W:0    | mipstx39/jmr3904: mrfs_fserror.exe
Result: invalid   
Time: 0:00:00.312114 mrfs_fserror.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fserror.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fserror.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2cac0 lma 0
=>  Loading section .init, size 0x40 lma 2cac0
=>  Loading section .fini, size 0x20 lma 2cb00
=>  Loading section .rodata, size 0x5b4f lma 2cb20
=>  Loading section .eh_frame_hdr, size 0x1484 lma 32670
=>  Loading section .eh_frame, size 0x7cfc lma 33af4
=>  Loading section .ctors, size 0x8 lma 3b7f0
=>  Loading section .dtors, size 0x8 lma 3b7f8
=>  Loading section .got2, size 0x2c lma 3b800
=>  Loading section .rtemsroset, size 0x74 lma 3b82c
=>  Loading section .data, size 0x548 lma 3b8a0
=>  Loading section .sdata, size 0xad lma 3bde8
=>  Start address 4
=>  Transfer rate: 1963168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fserror.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1274/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1265 W:0    | mipstx39/jmr3904: mrfs_fsfpathconf.exe
Result: invalid   
Time: 0:00:00.529262 mrfs_fsfpathconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fsfpathconf.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fsfpathconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24c28 lma 0
=>  Loading section .init, size 0x40 lma 24c28
=>  Loading section .fini, size 0x20 lma 24c68
=>  Loading section .rodata, size 0x550c lma 24c88
=>  Loading section .eh_frame_hdr, size 0x134c lma 2a194
=>  Loading section .eh_frame, size 0x73c0 lma 2b4e0
=>  Loading section .ctors, size 0x8 lma 328a0
=>  Loading section .dtors, size 0x8 lma 328a8
=>  Loading section .got2, size 0x2c lma 328b0
=>  Loading section .rtemsroset, size 0x74 lma 328dc
=>  Loading section .data, size 0x3dc lma 32950
=>  Loading section .sdata, size 0xad lma 32d30
=>  Start address 4
=>  Transfer rate: 1666760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsfpathconf.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1275/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1265 W:0    | mipstx39/jmr3904: mrfs_fslink.exe
Result: invalid   
Time: 0:00:00.302319 mrfs_fslink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fslink.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fslink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x254f8 lma 0
=>  Loading section .init, size 0x40 lma 254f8
=>  Loading section .fini, size 0x20 lma 25538
=>  Loading section .rodata, size 0x532c lma 25558
=>  Loading section .eh_frame_hdr, size 0x136c lma 2a884
=>  Loading section .eh_frame, size 0x749c lma 2bbf0
=>  Loading section .ctors, size 0x8 lma 3308c
=>  Loading section .dtors, size 0x8 lma 33094
=>  Loading section .got2, size 0x2c lma 3309c
=>  Loading section .rtemsroset, size 0x74 lma 330c8
=>  Loading section .data, size 0x3dc lma 33140
=>  Loading section .sdata, size 0xad lma 33520
=>  Start address 4
=>  Transfer rate: 1682984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fslink.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1276/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1268 W:0    | mipstx39/jmr3904: mrfs_fspatheval.exe
Result: invalid   
Time: 0:00:00.286331 mrfs_fspatheval.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fspatheval.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fspatheval.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x25be0 lma 0
=>  Loading section .init, size 0x40 lma 25be0
=>  Loading section .fini, size 0x20 lma 25c20
=>  Loading section .rodata, size 0x54bc lma 25c40
=>  Loading section .eh_frame_hdr, size 0x13bc lma 2b0fc
=>  Loading section .eh_frame, size 0x77ac lma 2c4b8
=>  Loading section .ctors, size 0x8 lma 33c64
=>  Loading section .dtors, size 0x8 lma 33c6c
=>  Loading section .got2, size 0x2c lma 33c74
=>  Loading section .rtemsroset, size 0x74 lma 33ca0
=>  Loading section .data, size 0x3dc lma 33d18
=>  Loading section .sdata, size 0xad lma 340f8
=>  Start address 4
=>  Transfer rate: 1707240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fspatheval.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1277/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1268 W:0    | mipstx39/jmr3904: mrfs_fspermission.exe
Result: invalid   
Time: 0:00:00.272825 mrfs_fspermission.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fspermission.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fspermission.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2d464 lma 0
=>  Loading section .init, size 0x40 lma 2d464
=>  Loading section .fini, size 0x20 lma 2d4a4
=>  Loading section .rodata, size 0x59ef lma 2d4c8
=>  Loading section .eh_frame_hdr, size 0x14e4 lma 32eb8
=>  Loading section .eh_frame, size 0x7f5c lma 3439c
=>  Loading section .ctors, size 0x8 lma 3c2f8
=>  Loading section .dtors, size 0x8 lma 3c300
=>  Loading section .got2, size 0x2c lma 3c308
=>  Loading section .rtemsroset, size 0x74 lma 3c334
=>  Loading section .data, size 0x548 lma 3c3a8
=>  Loading section .sdata, size 0xad lma 3c8f0
=>  Start address 4
=>  Transfer rate: 1985728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fspermission.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1278/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1268 W:0    | mipstx39/jmr3904: mrfs_fsrdwr.exe
Result: invalid   
Time: 0:00:00.282504 mrfs_fsrdwr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrdwr.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrdwr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27e78 lma 0
=>  Loading section .init, size 0x40 lma 27e78
=>  Loading section .fini, size 0x20 lma 27eb8
=>  Loading section .rodata, size 0x57a0 lma 27ed8
=>  Loading section .eh_frame_hdr, size 0x13bc lma 2d678
=>  Loading section .eh_frame, size 0x7638 lma 2ea34
=>  Loading section .ctors, size 0x8 lma 3606c
=>  Loading section .dtors, size 0x8 lma 36074
=>  Loading section .got2, size 0x2c lma 3607c
=>  Loading section .rtemsroset, size 0x74 lma 360a8
=>  Loading section .data, size 0x3dc lma 36120
=>  Loading section .sdata, size 0xbd lma 36500
=>  Start address 4
=>  Transfer rate: 1781160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrdwr.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1279/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1272 W:0    | mipstx39/jmr3904: mrfs_fsrename.exe
Result: invalid   
Time: 0:00:00.527069 mrfs_fsrename.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrename.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrename.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x306d8 lma 0
=>  Loading section .init, size 0x40 lma 306d8
=>  Loading section .fini, size 0x20 lma 30718
=>  Loading section .rodata, size 0x6087 lma 30738
=>  Loading section .eh_frame_hdr, size 0x14c4 lma 367c0
=>  Loading section .eh_frame, size 0x7ef0 lma 37c84
=>  Loading section .ctors, size 0x8 lma 3fb74
=>  Loading section .dtors, size 0x8 lma 3fb7c
=>  Loading section .got2, size 0x2c lma 3fb84
=>  Loading section .rtemsroset, size 0x74 lma 3fbb0
=>  Loading section .data, size 0x548 lma 3fc28
=>  Loading section .sdata, size 0xad lma 40170
=>  Start address 4
=>  Transfer rate: 2101440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsrename.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1280/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1272 W:0    | mipstx39/jmr3904: mrfs_fsscandir01.exe
Result: invalid   
Time: 0:00:00.261144 mrfs_fsscandir01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fsscandir01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fsscandir01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26444 lma 0
=>  Loading section .init, size 0x40 lma 26444
=>  Loading section .fini, size 0x20 lma 26484
=>  Loading section .rodata, size 0x5340 lma 264a8
=>  Loading section .eh_frame_hdr, size 0x13ac lma 2b7e8
=>  Loading section .eh_frame, size 0x76b4 lma 2cb94
=>  Loading section .ctors, size 0x8 lma 34248
=>  Loading section .dtors, size 0x8 lma 34250
=>  Loading section .got2, size 0x2c lma 34258
=>  Loading section .rtemsroset, size 0x74 lma 34284
=>  Loading section .data, size 0x3e0 lma 342f8
=>  Loading section .sdata, size 0xb1 lma 346d8
=>  Start address 4
=>  Transfer rate: 1719336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fsscandir01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1281/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1272 W:0    | mipstx39/jmr3904: mrfs_fssymlink.exe
Result: invalid   
Time: 0:00:00.505567 mrfs_fssymlink.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fssymlink.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fssymlink.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x25910 lma 0
=>  Loading section .init, size 0x40 lma 25910
=>  Loading section .fini, size 0x20 lma 25950
=>  Loading section .rodata, size 0x5484 lma 25970
=>  Loading section .eh_frame_hdr, size 0x138c lma 2adf4
=>  Loading section .eh_frame, size 0x7504 lma 2c180
=>  Loading section .ctors, size 0x8 lma 33684
=>  Loading section .dtors, size 0x8 lma 3368c
=>  Loading section .got2, size 0x2c lma 33694
=>  Loading section .rtemsroset, size 0x74 lma 336c0
=>  Loading section .data, size 0x3dc lma 33738
=>  Loading section .sdata, size 0xad lma 33b18
=>  Start address 4
=>  Transfer rate: 1695208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fssymlink.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1282/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1277 W:0    | mipstx39/jmr3904: mrfs_fstime.exe
Result: invalid   
Time: 0:00:00.514620 mrfs_fstime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x26a20 lma 0
=>  Loading section .init, size 0x40 lma 26a20
=>  Loading section .fini, size 0x20 lma 26a60
=>  Loading section .rodata, size 0x5452 lma 26a80
=>  Loading section .eh_frame_hdr, size 0x13fc lma 2bed4
=>  Loading section .eh_frame, size 0x77dc lma 2d2d0
=>  Loading section .ctors, size 0x8 lma 34aac
=>  Loading section .dtors, size 0x8 lma 34ab4
=>  Loading section .got2, size 0x2c lma 34abc
=>  Loading section .rtemsroset, size 0x74 lma 34ae8
=>  Loading section .data, size 0x3e8 lma 34b60
=>  Loading section .sdata, size 0xad lma 34f48
=>  Start address 4
=>  Transfer rate: 1736568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1283/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1277 W:0    | mipstx39/jmr3904: tftpfs.exe
Result: invalid   
Time: 0:00:00.256608 tftpfs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/tftpfs.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/tftpfs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x3833c lma 0
=>  Loading section .init, size 0x40 lma 3833c
=>  Loading section .fini, size 0x20 lma 3837c
=>  Loading section .rodata, size 0x64b0 lma 383a0
=>  Loading section .eh_frame_hdr, size 0x19a4 lma 3e850
=>  Loading section .eh_frame, size 0x965c lma 401f4
=>  Loading section .ctors, size 0x8 lma 49850
=>  Loading section .dtors, size 0x8 lma 49858
=>  Loading section .got2, size 0x2c lma 49860
=>  Loading section .rtemsroset, size 0x1ec lma 4988c
=>  Loading section .data, size 0xae4 lma 49a78
=>  Loading section .sdata, size 0x10d lma 4a560
=>  Start address 4
=>  Transfer rate: 2437928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/tftpfs.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1284/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1277 W:0    | mipstx39/jmr3904: block01.exe
Result: invalid   
Time: 0:00:00.533994 block01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19c68 lma 0
=>  Loading section .init, size 0x40 lma 19c68
=>  Loading section .fini, size 0x20 lma 19ca8
=>  Loading section .rodata, size 0x21ec lma 19cc8
=>  Loading section .eh_frame_hdr, size 0xeec lma 1beb4
=>  Loading section .eh_frame, size 0x5560 lma 1cda0
=>  Loading section .ctors, size 0x8 lma 22300
=>  Loading section .dtors, size 0x8 lma 22308
=>  Loading section .got2, size 0x2c lma 22310
=>  Loading section .rtemsroset, size 0x70 lma 2233c
=>  Loading section .data, size 0x388 lma 223b0
=>  Loading section .sdata, size 0x9d lma 22738
=>  Start address 4
=>  Transfer rate: 1130120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1285/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1277 W:0    | mipstx39/jmr3904: block02.exe
Result: invalid   
Time: 0:00:00.518843 block02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x183b8 lma 0
=>  Loading section .init, size 0x40 lma 183b8
=>  Loading section .fini, size 0x20 lma 183f8
=>  Loading section .rodata, size 0x219f lma 18418
=>  Loading section .eh_frame_hdr, size 0xe84 lma 1a5b8
=>  Loading section .eh_frame, size 0x50f8 lma 1b43c
=>  Loading section .ctors, size 0x8 lma 20534
=>  Loading section .dtors, size 0x8 lma 2053c
=>  Loading section .got2, size 0x2c lma 20544
=>  Loading section .rtemsroset, size 0x6c lma 20570
=>  Loading section .data, size 0x370 lma 205e0
=>  Loading section .sdata, size 0x9d lma 20950
=>  Start address 4
=>  Transfer rate: 1068864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1286/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1277 W:0    | mipstx39/jmr3904: block03.exe
Result: invalid   
Time: 0:00:00.512996 block03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18358 lma 0
=>  Loading section .init, size 0x40 lma 18358
=>  Loading section .fini, size 0x20 lma 18398
=>  Loading section .rodata, size 0x218f lma 183b8
=>  Loading section .eh_frame_hdr, size 0xe7c lma 1a548
=>  Loading section .eh_frame, size 0x50d4 lma 1b3c4
=>  Loading section .ctors, size 0x8 lma 20498
=>  Loading section .dtors, size 0x8 lma 204a0
=>  Loading section .got2, size 0x2c lma 204a8
=>  Loading section .rtemsroset, size 0x6c lma 204d4
=>  Loading section .data, size 0x370 lma 20540
=>  Loading section .sdata, size 0x9d lma 208b0
=>  Start address 4
=>  Transfer rate: 1067616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1287/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1277 W:0    | mipstx39/jmr3904: block04.exe
Result: invalid   
Time: 0:00:00.312256 block04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18258 lma 0
=>  Loading section .init, size 0x40 lma 18258
=>  Loading section .fini, size 0x20 lma 18298
=>  Loading section .rodata, size 0x2127 lma 182b8
=>  Loading section .eh_frame_hdr, size 0xe84 lma 1a3e0
=>  Loading section .eh_frame, size 0x5100 lma 1b264
=>  Loading section .ctors, size 0x8 lma 20364
=>  Loading section .dtors, size 0x8 lma 2036c
=>  Loading section .got2, size 0x2c lma 20374
=>  Loading section .rtemsroset, size 0x6c lma 203a0
=>  Loading section .data, size 0x370 lma 20410
=>  Loading section .sdata, size 0x9d lma 20780
=>  Start address 4
=>  Transfer rate: 1065152 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1288/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1280 W:0    | mipstx39/jmr3904: block05.exe
Result: invalid   
Time: 0:00:00.272547 block05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x197b8 lma 0
=>  Loading section .init, size 0x40 lma 197b8
=>  Loading section .fini, size 0x20 lma 197f8
=>  Loading section .rodata, size 0x2200 lma 19818
=>  Loading section .eh_frame_hdr, size 0xf34 lma 1ba18
=>  Loading section .eh_frame, size 0x5474 lma 1c94c
=>  Loading section .ctors, size 0x8 lma 21dc0
=>  Loading section .dtors, size 0x8 lma 21dc8
=>  Loading section .got2, size 0x2c lma 21dd0
=>  Loading section .rtemsroset, size 0x70 lma 21dfc
=>  Loading section .data, size 0x38c lma 21e70
=>  Loading section .sdata, size 0xad lma 22200
=>  Start address 4
=>  Transfer rate: 1119528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1289/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1280 W:0    | mipstx39/jmr3904: block06.exe
Result: invalid   
Time: 0:00:00.272472 block06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22944 lma 0
=>  Loading section .init, size 0x40 lma 22944
=>  Loading section .fini, size 0x20 lma 22984
=>  Loading section .rodata, size 0x3303 lma 229a8
=>  Loading section .eh_frame_hdr, size 0x114c lma 25cac
=>  Loading section .eh_frame, size 0x642c lma 26df8
=>  Loading section .ctors, size 0x8 lma 2d224
=>  Loading section .dtors, size 0x8 lma 2d22c
=>  Loading section .got2, size 0x2c lma 2d234
=>  Loading section .rtemsroset, size 0x74 lma 2d260
=>  Loading section .data, size 0x528 lma 2d2d8
=>  Loading section .sdata, size 0xb1 lma 2d800
=>  Start address 4
=>  Transfer rate: 1492288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1290/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1280 W:0    | mipstx39/jmr3904: block07.exe
Result: invalid   
Time: 0:00:00.261421 block07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18848 lma 0
=>  Loading section .init, size 0x40 lma 18848
=>  Loading section .fini, size 0x20 lma 18888
=>  Loading section .rodata, size 0x2204 lma 188a8
=>  Loading section .eh_frame_hdr, size 0xea4 lma 1aaac
=>  Loading section .eh_frame, size 0x51a8 lma 1b950
=>  Loading section .ctors, size 0x8 lma 20af8
=>  Loading section .dtors, size 0x8 lma 20b00
=>  Loading section .got2, size 0x2c lma 20b08
=>  Loading section .rtemsroset, size 0x6c lma 20b34
=>  Loading section .data, size 0x370 lma 20ba0
=>  Loading section .sdata, size 0x9d lma 20f10
=>  Start address 4
=>  Transfer rate: 1080680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1291/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1282 W:0    | mipstx39/jmr3904: block08.exe
Result: invalid   
Time: 0:00:00.260388 block08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2073c lma 0
=>  Loading section .init, size 0x40 lma 2073c
=>  Loading section .fini, size 0x20 lma 2077c
=>  Loading section .rodata, size 0x2af7 lma 207a0
=>  Loading section .eh_frame_hdr, size 0x116c lma 23298
=>  Loading section .eh_frame, size 0x6924 lma 24404
=>  Loading section .ctors, size 0x8 lma 2ad28
=>  Loading section .dtors, size 0x8 lma 2ad30
=>  Loading section .got2, size 0x2c lma 2ad38
=>  Loading section .rtemsroset, size 0x78 lma 2ad64
=>  Loading section .data, size 0x424 lma 2ade0
=>  Loading section .sdata, size 0xbd lma 2b208
=>  Start address 4
=>  Transfer rate: 1414592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1292/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1282 W:0    | mipstx39/jmr3904: block09.exe
Result: invalid   
Time: 0:00:00.274051 block09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block09.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18ec8 lma 0
=>  Loading section .init, size 0x40 lma 18ec8
=>  Loading section .fini, size 0x20 lma 18f08
=>  Loading section .rodata, size 0x21bf lma 18f28
=>  Loading section .eh_frame_hdr, size 0xefc lma 1b0e8
=>  Loading section .eh_frame, size 0x52c4 lma 1bfe4
=>  Loading section .ctors, size 0x8 lma 212a8
=>  Loading section .dtors, size 0x8 lma 212b0
=>  Loading section .got2, size 0x2c lma 212b8
=>  Loading section .rtemsroset, size 0x70 lma 212e4
=>  Loading section .data, size 0x38c lma 21358
=>  Loading section .sdata, size 0xb5 lma 216e8
=>  Start address 4
=>  Transfer rate: 1096864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block09.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1293/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1289 W:0    | mipstx39/jmr3904: block10.exe
Result: invalid   
Time: 0:00:00.279343 block10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block10.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19908 lma 0
=>  Loading section .init, size 0x40 lma 19908
=>  Loading section .fini, size 0x20 lma 19948
=>  Loading section .rodata, size 0x23a3 lma 19968
=>  Loading section .eh_frame_hdr, size 0xf54 lma 1bd0c
=>  Loading section .eh_frame, size 0x55e8 lma 1cc60
=>  Loading section .ctors, size 0x8 lma 22248
=>  Loading section .dtors, size 0x8 lma 22250
=>  Loading section .got2, size 0x2c lma 22258
=>  Loading section .rtemsroset, size 0x70 lma 22284
=>  Loading section .data, size 0x38c lma 222f8
=>  Loading section .sdata, size 0xfd lma 22688
=>  Start address 4
=>  Transfer rate: 1129440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block10.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1294/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1289 W:0    | mipstx39/jmr3904: block11.exe
Result: invalid   
Time: 0:00:00.514292 block11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block11.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a670 lma 0
=>  Loading section .init, size 0x40 lma 1a670
=>  Loading section .fini, size 0x20 lma 1a6b0
=>  Loading section .rodata, size 0x23d4 lma 1a6d0
=>  Loading section .eh_frame_hdr, size 0xf9c lma 1caa4
=>  Loading section .eh_frame, size 0x56b4 lma 1da40
=>  Loading section .tdata, size 0x10 lma 230f4
=>  Loading section .ctors, size 0x8 lma 23104
=>  Loading section .dtors, size 0x8 lma 2310c
=>  Loading section .got2, size 0x2c lma 23114
=>  Loading section .rtemsroset, size 0x74 lma 23140
=>  Loading section .data, size 0x3a4 lma 231b8
=>  Loading section .sdata, size 0xa9 lma 23560
=>  Start address 4
=>  Transfer rate: 1159176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block11.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1295/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1290 W:0    | mipstx39/jmr3904: block12.exe
Result: invalid   
Time: 0:00:00.533612 block12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block12.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x189a0 lma 0
=>  Loading section .init, size 0x40 lma 189a0
=>  Loading section .fini, size 0x20 lma 189e0
=>  Loading section .rodata, size 0x2200 lma 18a00
=>  Loading section .eh_frame_hdr, size 0xed4 lma 1ac00
=>  Loading section .eh_frame, size 0x51bc lma 1bad4
=>  Loading section .ctors, size 0x8 lma 20c90
=>  Loading section .dtors, size 0x8 lma 20c98
=>  Loading section .got2, size 0x2c lma 20ca0
=>  Loading section .rtemsroset, size 0x70 lma 20ccc
=>  Loading section .data, size 0x3cc lma 20d40
=>  Loading section .sdata, size 0xa5 lma 21110
=>  Start address 4
=>  Transfer rate: 1084776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block12.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1296/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1290 W:0    | mipstx39/jmr3904: block13.exe
Result: invalid   
Time: 0:00:00.516083 block13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block13.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18b94 lma 0
=>  Loading section .init, size 0x40 lma 18b94
=>  Loading section .fini, size 0x20 lma 18bd4
=>  Loading section .rodata, size 0x2744 lma 18bf8
=>  Loading section .eh_frame_hdr, size 0xee4 lma 1b33c
=>  Loading section .eh_frame, size 0x5264 lma 1c220
=>  Loading section .ctors, size 0x8 lma 21484
=>  Loading section .dtors, size 0x8 lma 2148c
=>  Loading section .got2, size 0x2c lma 21494
=>  Loading section .rtemsroset, size 0x70 lma 214c0
=>  Loading section .data, size 0x38c lma 21530
=>  Loading section .sdata, size 0xa5 lma 218c0
=>  Start address 4
=>  Transfer rate: 1100520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block13.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1297/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1290 W:0    | mipstx39/jmr3904: block14.exe
Result: invalid   
Time: 0:00:00.521698 block14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block14.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18e18 lma 0
=>  Loading section .init, size 0x40 lma 18e18
=>  Loading section .fini, size 0x20 lma 18e58
=>  Loading section .rodata, size 0x2b8c lma 18e78
=>  Loading section .eh_frame_hdr, size 0xee4 lma 1ba04
=>  Loading section .eh_frame, size 0x52d8 lma 1c8e8
=>  Loading section .ctors, size 0x8 lma 21bc0
=>  Loading section .dtors, size 0x8 lma 21bc8
=>  Loading section .got2, size 0x2c lma 21bd0
=>  Loading section .rtemsroset, size 0x70 lma 21bfc
=>  Loading section .data, size 0x38c lma 21c70
=>  Loading section .sdata, size 0xa5 lma 22000
=>  Start address 4
=>  Transfer rate: 1115368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block14.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1298/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1290 W:0    | mipstx39/jmr3904: block15.exe
Result: invalid   
Time: 0:00:00.261399 block15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block15.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18ba0 lma 0
=>  Loading section .init, size 0x40 lma 18ba0
=>  Loading section .fini, size 0x20 lma 18be0
=>  Loading section .rodata, size 0x22cc lma 18c00
=>  Loading section .eh_frame_hdr, size 0xecc lma 1aecc
=>  Loading section .eh_frame, size 0x520c lma 1bd98
=>  Loading section .ctors, size 0x8 lma 20fa4
=>  Loading section .dtors, size 0x8 lma 20fac
=>  Loading section .got2, size 0x2c lma 20fb4
=>  Loading section .rtemsroset, size 0x70 lma 20fe0
=>  Loading section .data, size 0x38c lma 21050
=>  Loading section .sdata, size 0xa5 lma 213e0
=>  Start address 4
=>  Transfer rate: 1090568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block15.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1299/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1290 W:0    | mipstx39/jmr3904: block16.exe
Result: invalid   
Time: 0:00:00.504726 block16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block16.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18ee0 lma 0
=>  Loading section .init, size 0x40 lma 18ee0
=>  Loading section .fini, size 0x20 lma 18f20
=>  Loading section .rodata, size 0x227c lma 18f40
=>  Loading section .eh_frame_hdr, size 0xedc lma 1b1bc
=>  Loading section .eh_frame, size 0x5264 lma 1c098
=>  Loading section .ctors, size 0x8 lma 212fc
=>  Loading section .dtors, size 0x8 lma 21304
=>  Loading section .got2, size 0x2c lma 2130c
=>  Loading section .rtemsroset, size 0x70 lma 21338
=>  Loading section .data, size 0x38c lma 213a8
=>  Loading section .sdata, size 0xa5 lma 21738
=>  Start address 4
=>  Transfer rate: 1097416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block16.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1300/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1290 W:0    | mipstx39/jmr3904: block17.exe
Result: invalid   
Time: 0:00:00.260039 block17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/block17.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/block17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18100 lma 0
=>  Loading section .init, size 0x40 lma 18100
=>  Loading section .fini, size 0x20 lma 18140
=>  Loading section .rodata, size 0x2124 lma 18160
=>  Loading section .eh_frame_hdr, size 0xe8c lma 1a284
=>  Loading section .eh_frame, size 0x4fe4 lma 1b110
=>  Loading section .ctors, size 0x8 lma 200f4
=>  Loading section .dtors, size 0x8 lma 200fc
=>  Loading section .got2, size 0x2c lma 20104
=>  Loading section .rtemsroset, size 0x70 lma 20130
=>  Loading section .data, size 0x38c lma 201a0
=>  Loading section .sdata, size 0xa5 lma 20530
=>  Start address 4
=>  Transfer rate: 1060488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block17.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1301/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1291 W:0    | mipstx39/jmr3904: bspcmdline01.exe
Result: invalid   
Time: 0:00:00.260321 bspcmdline01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/bspcmdline01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/bspcmdline01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14050 lma 0
=>  Loading section .init, size 0x40 lma 14050
=>  Loading section .fini, size 0x20 lma 14090
=>  Loading section .rodata, size 0x2478 lma 140b0
=>  Loading section .eh_frame_hdr, size 0xc4c lma 16528
=>  Loading section .eh_frame, size 0x4040 lma 17174
=>  Loading section .ctors, size 0x8 lma 1b1b4
=>  Loading section .dtors, size 0x8 lma 1b1bc
=>  Loading section .got2, size 0x2c lma 1b1c4
=>  Loading section .rtemsroset, size 0x6c lma 1b1f0
=>  Loading section .data, size 0x34c lma 1b260
=>  Loading section .sdata, size 0x91 lma 1b5ac
=>  Start address 4
=>  Transfer rate: 897480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/bspcmdline01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1302/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1295 W:0    | mipstx39/jmr3904: capture01.exe
Result: invalid   
Time: 0:00:00.251356 capture01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/capture01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/capture01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x219bc lma 0
=>  Loading section .init, size 0x40 lma 219bc
=>  Loading section .fini, size 0x20 lma 219fc
=>  Loading section .rodata, size 0x2d41 lma 21a20
=>  Loading section .eh_frame_hdr, size 0x122c lma 24764
=>  Loading section .eh_frame, size 0x6700 lma 25990
=>  Loading section .tdata, size 0xc lma 2c090
=>  Loading section .ctors, size 0x8 lma 2c09c
=>  Loading section .dtors, size 0x8 lma 2c0a4
=>  Loading section .got2, size 0x2c lma 2c0ac
=>  Loading section .rtemsroset, size 0x78 lma 2c0d8
=>  Loading section .data, size 0x564 lma 2c150
=>  Loading section .sdata, size 0xb5 lma 2c6b8
=>  Start address 4
=>  Transfer rate: 1456912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/capture01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1303/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1297 W:0    | mipstx39/jmr3904: complex.exe
Result: invalid   
Time: 0:00:00.257646 complex.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/complex.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/complex.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27720 lma 0
=>  Loading section .init, size 0x40 lma 27720
=>  Loading section .fini, size 0x20 lma 27760
=>  Loading section .rodata, size 0x3333 lma 27780
=>  Loading section .eh_frame_hdr, size 0x1254 lma 2aab4
=>  Loading section .eh_frame, size 0x6df4 lma 2bd08
=>  Loading section .tdata, size 0xc lma 32afc
=>  Loading section .ctors, size 0x8 lma 32b08
=>  Loading section .dtors, size 0x8 lma 32b10
=>  Loading section .got2, size 0x2c lma 32b18
=>  Loading section .rtemsroset, size 0x6c lma 32b44
=>  Loading section .data, size 0x504 lma 32bb0
=>  Loading section .sdata, size 0xa9 lma 330b4
=>  Start address 4
=>  Transfer rate: 1673952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/complex.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1304/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1297 W:0    | mipstx39/jmr3904: cpuuse.exe
Result: invalid   
Time: 0:00:00.261199 cpuuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/cpuuse.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/cpuuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x164ec lma 0
=>  Loading section .init, size 0x40 lma 164ec
=>  Loading section .fini, size 0x20 lma 1652c
=>  Loading section .rodata, size 0x2aa9 lma 16550
=>  Loading section .eh_frame_hdr, size 0xdec lma 18ffc
=>  Loading section .eh_frame, size 0x4814 lma 19de8
=>  Loading section .ctors, size 0x8 lma 1e5fc
=>  Loading section .dtors, size 0x8 lma 1e604
=>  Loading section .got2, size 0x2c lma 1e60c
=>  Loading section .rtemsroset, size 0x74 lma 1e638
=>  Loading section .data, size 0x568 lma 1e6b0
=>  Loading section .sdata, size 0xbd lma 1ec18
=>  Start address 4
=>  Transfer rate: 1009232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/cpuuse.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1305/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1297 W:0    | mipstx39/jmr3904: crypt01.exe
Result: invalid   
Time: 0:00:00.260042 crypt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/crypt01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/crypt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20154 lma 0
=>  Loading section .init, size 0x40 lma 20154
=>  Loading section .fini, size 0x20 lma 20194
=>  Loading section .rodata, size 0x34bf lma 201b8
=>  Loading section .eh_frame_hdr, size 0xe2c lma 23678
=>  Loading section .eh_frame, size 0x4d70 lma 244a4
=>  Loading section .ctors, size 0x8 lma 29214
=>  Loading section .dtors, size 0x8 lma 2921c
=>  Loading section .got2, size 0x2c lma 29224
=>  Loading section .rtemsroset, size 0x70 lma 29250
=>  Loading section .data, size 0x524 lma 292c0
=>  Loading section .sdata, size 0xb9 lma 297e4
=>  Start address 4
=>  Transfer rate: 1361088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/crypt01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1306/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1297 W:0    | mipstx39/jmr3904: defaultconfig01.exe
Result: invalid   
Time: 0:00:00.255444 defaultconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/defaultconfig01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/defaultconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17d34 lma 0
=>  Loading section .init, size 0x40 lma 17d34
=>  Loading section .fini, size 0x20 lma 17d74
=>  Loading section .rodata, size 0x22e5 lma 17d98
=>  Loading section .eh_frame_hdr, size 0xe9c lma 1a080
=>  Loading section .eh_frame, size 0x4e8c lma 1af1c
=>  Loading section .ctors, size 0x8 lma 1fda8
=>  Loading section .dtors, size 0x8 lma 1fdb0
=>  Loading section .got2, size 0x2c lma 1fdb8
=>  Loading section .rtemsroset, size 0x74 lma 1fde4
=>  Loading section .data, size 0x4ec lma 1fe58
=>  Loading section .sdata, size 0xb8 lma 20348
=>  Start address 4
=>  Transfer rate: 1056680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/defaultconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1307/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1300 W:0    | mipstx39/jmr3904: devfs01.exe
Result: invalid   
Time: 0:00:00.260093 devfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/devfs01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/devfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10244 lma 0
=>  Loading section .init, size 0x40 lma 10244
=>  Loading section .fini, size 0x20 lma 10284
=>  Loading section .rodata, size 0x1db0 lma 102a8
=>  Loading section .eh_frame_hdr, size 0xad4 lma 12058
=>  Loading section .eh_frame, size 0x35d0 lma 12b2c
=>  Loading section .ctors, size 0x8 lma 160fc
=>  Loading section .dtors, size 0x8 lma 16104
=>  Loading section .got2, size 0x2c lma 1610c
=>  Loading section .rtemsroset, size 0x6c lma 16138
=>  Loading section .data, size 0x34c lma 161a8
=>  Loading section .sdata, size 0x8d lma 164f4
=>  Start address 4
=>  Transfer rate: 732104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/devfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1308/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1301 W:0    | mipstx39/jmr3904: devfs04.exe
Result: invalid   
Time: 0:00:00.276300 devfs04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/devfs04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/devfs04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11340 lma 0
=>  Loading section .init, size 0x40 lma 11340
=>  Loading section .fini, size 0x20 lma 11380
=>  Loading section .rodata, size 0x201c lma 113a0
=>  Loading section .eh_frame_hdr, size 0xb6c lma 133bc
=>  Loading section .eh_frame, size 0x383c lma 13f28
=>  Loading section .ctors, size 0x8 lma 17764
=>  Loading section .dtors, size 0x8 lma 1776c
=>  Loading section .got2, size 0x2c lma 17774
=>  Loading section .rtemsroset, size 0x6c lma 177a0
=>  Loading section .data, size 0x340 lma 17810
=>  Loading section .sdata, size 0xa0 lma 17b50
=>  Start address 4
=>  Transfer rate: 778080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/devfs04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1309/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1304 W:0    | mipstx39/jmr3904: deviceio01.exe
Result: invalid   
Time: 0:00:00.276181 deviceio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/deviceio01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/deviceio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x143e8 lma 0
=>  Loading section .init, size 0x40 lma 143e8
=>  Loading section .fini, size 0x20 lma 14428
=>  Loading section .rodata, size 0x20dc lma 14448
=>  Loading section .eh_frame_hdr, size 0xce4 lma 16524
=>  Loading section .eh_frame, size 0x426c lma 17208
=>  Loading section .ctors, size 0x8 lma 1b474
=>  Loading section .dtors, size 0x8 lma 1b47c
=>  Loading section .got2, size 0x2c lma 1b484
=>  Loading section .rtemsroset, size 0x74 lma 1b4b0
=>  Loading section .data, size 0x380 lma 1b528
=>  Loading section .sdata, size 0xa5 lma 1b8a8
=>  Start address 4
=>  Transfer rate: 903752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/deviceio01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1310/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1304 W:0    | mipstx39/jmr3904: devnullfatal01.exe
Result: invalid   
Time: 0:00:00.531166 devnullfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/devnullfatal01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/devnullfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14028 lma 0
=>  Loading section .init, size 0x40 lma 14028
=>  Loading section .fini, size 0x20 lma 14068
=>  Loading section .rodata, size 0x24b3 lma 14088
=>  Loading section .eh_frame_hdr, size 0xc9c lma 1653c
=>  Loading section .eh_frame, size 0x4190 lma 171d8
=>  Loading section .ctors, size 0x8 lma 1b368
=>  Loading section .dtors, size 0x8 lma 1b370
=>  Loading section .got2, size 0x2c lma 1b378
=>  Loading section .rtemsroset, size 0x70 lma 1b3a4
=>  Loading section .data, size 0x364 lma 1b418
=>  Loading section .sdata, size 0xa9 lma 1b780
=>  Start address 4
=>  Transfer rate: 901376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/devnullfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1311/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1304 W:0    | mipstx39/jmr3904: dl01.exe
Result: invalid   
Time: 0:00:00.312425 dl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2d2e8 lma 0
=>  Loading section .init, size 0x40 lma 2d2e8
=>  Loading section .fini, size 0x20 lma 2d328
=>  Loading section .rodata, size 0xd5d8 lma 2d350
=>  Loading section .eh_frame_hdr, size 0x158c lma 3a928
=>  Loading section .eh_frame, size 0x8464 lma 3beb4
=>  Loading section .ctors, size 0x8 lma 44318
=>  Loading section .dtors, size 0x8 lma 44320
=>  Loading section .got2, size 0x2c lma 44328
=>  Loading section .rtemsroset, size 0x70 lma 44354
=>  Loading section .data, size 0x524 lma 443c8
=>  Loading section .sdata, size 0xd8 lma 448f0
=>  Start address 4
=>  Transfer rate: 2248128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1312/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1304 W:0    | mipstx39/jmr3904: dl02.exe
Result: invalid   
Time: 0:00:00.324169 dl02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2d368 lma 0
=>  Loading section .init, size 0x40 lma 2d368
=>  Loading section .fini, size 0x20 lma 2d3a8
=>  Loading section .rodata, size 0xd5b8 lma 2d3d0
=>  Loading section .eh_frame_hdr, size 0x158c lma 3a988
=>  Loading section .eh_frame, size 0x8468 lma 3bf14
=>  Loading section .ctors, size 0x8 lma 4437c
=>  Loading section .dtors, size 0x8 lma 44384
=>  Loading section .got2, size 0x2c lma 4438c
=>  Loading section .rtemsroset, size 0x70 lma 443b8
=>  Loading section .data, size 0x52c lma 44428
=>  Loading section .sdata, size 0xd0 lma 44958
=>  Start address 4
=>  Transfer rate: 2248928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1313/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1304 W:0    | mipstx39/jmr3904: dl03.exe
Result: invalid   
Time: 0:00:00.266551 dl03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1fa9c lma 0
=>  Loading section .init, size 0x40 lma 1fa9c
=>  Loading section .fini, size 0x20 lma 1fadc
=>  Loading section .rodata, size 0x3173 lma 1fb00
=>  Loading section .eh_frame_hdr, size 0xf9c lma 22c74
=>  Loading section .eh_frame, size 0x58a8 lma 23c10
=>  Loading section .ctors, size 0x8 lma 294b8
=>  Loading section .dtors, size 0x8 lma 294c0
=>  Loading section .got2, size 0x2c lma 294c8
=>  Loading section .rtemsroset, size 0x70 lma 294f4
=>  Loading section .data, size 0x578 lma 29568
=>  Loading section .sdata, size 0xa5 lma 29ae0
=>  Start address 4
=>  Transfer rate: 1367008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1314/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1304 W:0    | mipstx39/jmr3904: dl04.exe
Result: invalid   
Time: 0:00:00.257853 dl04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2cdc8 lma 0
=>  Loading section .init, size 0x40 lma 2cdc8
=>  Loading section .fini, size 0x20 lma 2ce08
=>  Loading section .rodata, size 0xd4c8 lma 2ce30
=>  Loading section .eh_frame_hdr, size 0x155c lma 3a2f8
=>  Loading section .eh_frame, size 0x8328 lma 3b854
=>  Loading section .ctors, size 0x8 lma 43b7c
=>  Loading section .dtors, size 0x8 lma 43b84
=>  Loading section .got2, size 0x2c lma 43b8c
=>  Loading section .rtemsroset, size 0x70 lma 43bb8
=>  Loading section .data, size 0x51c lma 43c28
=>  Loading section .sdata, size 0xd0 lma 44148
=>  Start address 4
=>  Transfer rate: 2232416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1315/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1307 W:0    | mipstx39/jmr3904: dl05.exe
Result: invalid   
Time: 0:00:00.288232 dl05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x40840 lma 0
=>  Loading section .init, size 0x40 lma 40840
=>  Loading section .fini, size 0x20 lma 40880
=>  Loading section .rodata, size 0x10cd2 lma 408a0
=>  Loading section .eh_frame_hdr, size 0x1bec lma 51574
=>  Loading section .eh_frame, size 0xb9ec lma 53160
=>  Loading section .gcc_except_table, size 0xf2 lma 5eb4c
=>  Loading section .tdata, size 0xc lma 5ec40
=>  Loading section .ctors, size 0xc lma 5ec4c
=>  Loading section .dtors, size 0x8 lma 5ec58
=>  Loading section .got2, size 0x2c lma 5ec60
=>  Loading section .rtemsroset, size 0x78 lma 5ec8c
=>  Loading section .data, size 0x58c lma 5ed08
=>  Loading section .sdata, size 0x108 lma 5f298
=>  Start address 4
=>  Transfer rate: 3120288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00000004 in std::set_unexpected (func=0x0 <std::set_unexpected(void (*)())>) at ../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc:108
=>  108	../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc: No such file or directory.
[1316/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1307 W:0    | mipstx39/jmr3904: dl06.exe
Result: invalid   
Time: 0:00:00.273311 dl06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2d308 lma 0
=>  Loading section .init, size 0x40 lma 2d308
=>  Loading section .fini, size 0x20 lma 2d348
=>  Loading section .rodata, size 0xfda8 lma 2d370
=>  Loading section .eh_frame_hdr, size 0x158c lma 3d118
=>  Loading section .eh_frame, size 0x8468 lma 3e6a4
=>  Loading section .ctors, size 0x8 lma 46b0c
=>  Loading section .dtors, size 0x8 lma 46b14
=>  Loading section .got2, size 0x2c lma 46b1c
=>  Loading section .rtemsroset, size 0x70 lma 46b48
=>  Loading section .data, size 0x52c lma 46bb8
=>  Loading section .sdata, size 0xd0 lma 470e8
=>  Start address 4
=>  Transfer rate: 2329952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1317/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1307 W:0    | mipstx39/jmr3904: dl07.exe
Result: invalid   
Time: 0:00:00.287912 dl07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2e1cc lma 0
=>  Loading section .init, size 0x40 lma 2e1cc
=>  Loading section .fini, size 0x20 lma 2e20c
=>  Loading section .rodata, size 0x12798 lma 2e230
=>  Loading section .eh_frame_hdr, size 0x15d4 lma 409c8
=>  Loading section .eh_frame, size 0x8628 lma 41f9c
=>  Loading section .ctors, size 0x8 lma 4a5c4
=>  Loading section .dtors, size 0x8 lma 4a5cc
=>  Loading section .got2, size 0x2c lma 4a5d4
=>  Loading section .rtemsroset, size 0x70 lma 4a600
=>  Loading section .data, size 0x51c lma 4a670
=>  Loading section .sdata, size 0xd0 lma 4ab90
=>  Start address 4
=>  Transfer rate: 2450112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1318/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1312 W:0    | mipstx39/jmr3904: dl08.exe
Result: invalid   
Time: 0:00:00.257031 dl08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2de6c lma 0
=>  Loading section .init, size 0x40 lma 2de6c
=>  Loading section .fini, size 0x20 lma 2deac
=>  Loading section .rodata, size 0x126a8 lma 2ded0
=>  Loading section .eh_frame_hdr, size 0x15d4 lma 40578
=>  Loading section .eh_frame, size 0x8628 lma 41b4c
=>  Loading section .ctors, size 0x8 lma 4a174
=>  Loading section .dtors, size 0x8 lma 4a17c
=>  Loading section .got2, size 0x2c lma 4a184
=>  Loading section .rtemsroset, size 0x70 lma 4a1b0
=>  Loading section .data, size 0x51c lma 4a220
=>  Loading section .sdata, size 0xd0 lma 4a740
=>  Start address 4
=>  Transfer rate: 2441280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1319/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1312 W:0    | mipstx39/jmr3904: dl09.exe
Result: invalid   
Time: 0:00:00.258507 dl09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl09.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2e20c lma 0
=>  Loading section .init, size 0x40 lma 2e20c
=>  Loading section .fini, size 0x20 lma 2e24c
=>  Loading section .rodata, size 0x12778 lma 2e270
=>  Loading section .eh_frame_hdr, size 0x15ec lma 409e8
=>  Loading section .eh_frame, size 0x86a0 lma 41fd4
=>  Loading section .ctors, size 0x8 lma 4a674
=>  Loading section .dtors, size 0x8 lma 4a67c
=>  Loading section .got2, size 0x2c lma 4a684
=>  Loading section .rtemsroset, size 0x70 lma 4a6b0
=>  Loading section .data, size 0x51c lma 4a720
=>  Loading section .sdata, size 0xd0 lma 4ac40
=>  Start address 4
=>  Transfer rate: 2451520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl09.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1320/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1312 W:0    | mipstx39/jmr3904: dl10.exe
Result: invalid   
Time: 0:00:00.260862 dl10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl10.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x803fc lma 0
=>  Loading section .init, size 0x40 lma 803fc
=>  Loading section .fini, size 0x20 lma 8043c
=>  Loading section .rodata, size 0x22c1c lma 80460
=>  Loading section .eh_frame_hdr, size 0x303c lma a307c
=>  Loading section .eh_frame, size 0x152cc lma a60b8
=>  Loading section .tdata, size 0x14 lma bb388
=>  Loading section .ctors, size 0x8 lma bb39c
=>  Loading section .dtors, size 0x8 lma bb3a4
=>  Loading section .got2, size 0x2c lma bb3ac
=>  Loading section .rtemsroset, size 0x80 lma bb3d8
=>  Loading section .data, size 0x1700 lma bb458
=>  Loading section .sdata, size 0x150 lma bcb58
=>  Start address 4
=>  Transfer rate: 6186240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl10.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1321/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1313 W:0    | mipstx39/jmr3904: dumpbuf01.exe
Result: invalid   
Time: 0:00:00.257753 dumpbuf01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dumpbuf01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dumpbuf01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14018 lma 0
=>  Loading section .init, size 0x40 lma 14018
=>  Loading section .fini, size 0x20 lma 14058
=>  Loading section .rodata, size 0x20d5 lma 14078
=>  Loading section .eh_frame_hdr, size 0xc94 lma 16150
=>  Loading section .eh_frame, size 0x418c lma 16de4
=>  Loading section .ctors, size 0x8 lma 1af70
=>  Loading section .dtors, size 0x8 lma 1af78
=>  Loading section .got2, size 0x2c lma 1af80
=>  Loading section .rtemsroset, size 0x70 lma 1afac
=>  Loading section .data, size 0x390 lma 1b020
=>  Loading section .sdata, size 0xa9 lma 1b3b0
=>  Start address 4
=>  Transfer rate: 893584 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dumpbuf01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1322/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1315 W:0    | mipstx39/jmr3904: exit01.exe
Result: invalid   
Time: 0:00:00.286535 exit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/exit01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/exit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13fc8 lma 0
=>  Loading section .init, size 0x40 lma 13fc8
=>  Loading section .fini, size 0x20 lma 14008
=>  Loading section .rodata, size 0x2047 lma 14028
=>  Loading section .eh_frame_hdr, size 0xcac lma 16070
=>  Loading section .eh_frame, size 0x4190 lma 16d1c
=>  Loading section .ctors, size 0x8 lma 1aeac
=>  Loading section .dtors, size 0x8 lma 1aeb4
=>  Loading section .got2, size 0x2c lma 1aebc
=>  Loading section .rtemsroset, size 0x70 lma 1aee8
=>  Loading section .data, size 0x368 lma 1af58
=>  Loading section .sdata, size 0xb9 lma 1b2c0
=>  Start address 4
=>  Transfer rate: 891840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/exit01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1323/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1318 W:0    | mipstx39/jmr3904: exit02.exe
Result: invalid   
Time: 0:00:00.255094 exit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/exit02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/exit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13cc0 lma 0
=>  Loading section .init, size 0x40 lma 13cc0
=>  Loading section .fini, size 0x20 lma 13d00
=>  Loading section .rodata, size 0x2007 lma 13d20
=>  Loading section .eh_frame_hdr, size 0xc94 lma 15d28
=>  Loading section .eh_frame, size 0x4100 lma 169bc
=>  Loading section .ctors, size 0x8 lma 1aabc
=>  Loading section .dtors, size 0x8 lma 1aac4
=>  Loading section .got2, size 0x2c lma 1aacc
=>  Loading section .rtemsroset, size 0x70 lma 1aaf8
=>  Loading section .data, size 0x368 lma 1ab68
=>  Loading section .sdata, size 0xb9 lma 1aed0
=>  Start address 4
=>  Transfer rate: 883776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/exit02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1324/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1318 W:0    | mipstx39/jmr3904: exit03.exe
Result: invalid   
Time: 0:00:00.508235 exit03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/exit03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/exit03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x95368 lma 0
=>  Loading section .init, size 0x40 lma 95368
=>  Loading section .fini, size 0x20 lma 953a8
=>  Loading section .rodata, size 0xa7c4 lma 953c8
=>  Loading section .eh_frame_hdr, size 0x37a4 lma 9fb8c
=>  Loading section .eh_frame, size 0x16c84 lma a3330
=>  Loading section .gcc_except_table, size 0x1d61 lma b9fb4
=>  Loading section .tdata, size 0xc lma bbd18
=>  Loading section .ctors, size 0x28 lma bbd24
=>  Loading section .dtors, size 0x8 lma bbd4c
=>  Loading section .got2, size 0x2c lma bbd54
=>  Loading section .rtemsroset, size 0x78 lma bbd80
=>  Loading section .data, size 0x5ec lma bbdf8
=>  Loading section .sdata, size 0x190 lma bc3e8
=>  Start address 4
=>  Transfer rate: 6171528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/exit03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00000004 in std::set_unexpected (func=0x0 <std::set_unexpected(void (*)())>) at ../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc:108
=>  108	../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc: No such file or directory.
[1325/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1318 W:0    | mipstx39/jmr3904: flashdisk01.exe
Result: invalid   
Time: 0:00:00.253304 flashdisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/flashdisk01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/flashdisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x34c5c lma 0
=>  Loading section .init, size 0x40 lma 34c5c
=>  Loading section .fini, size 0x20 lma 34c9c
=>  Loading section .rodata, size 0x670c lma 34cc0
=>  Loading section .eh_frame_hdr, size 0x16dc lma 3b3cc
=>  Loading section .eh_frame, size 0x9330 lma 3caa8
=>  Loading section .tdata, size 0x1c lma 45dd8
=>  Loading section .ctors, size 0x8 lma 45df4
=>  Loading section .dtors, size 0x8 lma 45dfc
=>  Loading section .got2, size 0x2c lma 45e04
=>  Loading section .rtemsroset, size 0x74 lma 45e30
=>  Loading section .data, size 0x51c lma 45ea8
=>  Loading section .sdata, size 0xc1 lma 463c8
=>  Start address 4
=>  Transfer rate: 2302952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/flashdisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1326/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1320 W:0    | mipstx39/jmr3904: getentropy01.exe
Result: invalid   
Time: 0:00:00.557077 getentropy01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/getentropy01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/getentropy01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13154 lma 0
=>  Loading section .init, size 0x40 lma 13154
=>  Loading section .fini, size 0x20 lma 13194
=>  Loading section .rodata, size 0x1f3b lma 131b8
=>  Loading section .eh_frame_hdr, size 0xbf4 lma 150f4
=>  Loading section .eh_frame, size 0x3e8c lma 15ce8
=>  Loading section .ctors, size 0x8 lma 19b74
=>  Loading section .dtors, size 0x8 lma 19b7c
=>  Loading section .got2, size 0x2c lma 19b84
=>  Loading section .rtemsroset, size 0x70 lma 19bb0
=>  Loading section .data, size 0x34c lma 19c20
=>  Loading section .sdata, size 0x91 lma 19f6c
=>  Start address 4
=>  Transfer rate: 851904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/getentropy01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1327/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1322 W:0    | mipstx39/jmr3904: heapwalk.exe
Result: invalid   
Time: 0:00:00.254010 heapwalk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/heapwalk.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/heapwalk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14a78 lma 0
=>  Loading section .init, size 0x40 lma 14a78
=>  Loading section .fini, size 0x20 lma 14ab8
=>  Loading section .rodata, size 0x29d7 lma 14ad8
=>  Loading section .eh_frame_hdr, size 0xcb4 lma 174b0
=>  Loading section .eh_frame, size 0x4244 lma 18164
=>  Loading section .ctors, size 0x8 lma 1c3a8
=>  Loading section .dtors, size 0x8 lma 1c3b0
=>  Loading section .got2, size 0x2c lma 1c3b8
=>  Loading section .rtemsroset, size 0x70 lma 1c3e4
=>  Loading section .data, size 0x368 lma 1c458
=>  Loading section .sdata, size 0xa9 lma 1c7c0
=>  Start address 4
=>  Transfer rate: 934688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/heapwalk.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1328/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1322 W:0    | mipstx39/jmr3904: i2c01.exe
Result: invalid   
Time: 0:00:00.516083 i2c01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/i2c01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/i2c01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x190e8 lma 0
=>  Loading section .init, size 0x40 lma 190e8
=>  Loading section .fini, size 0x20 lma 19128
=>  Loading section .rodata, size 0x2584 lma 19148
=>  Loading section .eh_frame_hdr, size 0xefc lma 1b6cc
=>  Loading section .eh_frame, size 0x4f68 lma 1c5c8
=>  Loading section .ctors, size 0x8 lma 21530
=>  Loading section .dtors, size 0x8 lma 21538
=>  Loading section .got2, size 0x2c lma 21540
=>  Loading section .rtemsroset, size 0x70 lma 2156c
=>  Loading section .data, size 0x394 lma 215e0
=>  Loading section .sdata, size 0xb5 lma 21978
=>  Start address 4
=>  Transfer rate: 1102120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/i2c01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1329/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1322 W:0    | mipstx39/jmr3904: irqs01.exe
Result: invalid   
Time: 0:00:00.506850 irqs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/irqs01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/irqs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x194e0 lma 0
=>  Loading section .init, size 0x40 lma 194e0
=>  Loading section .fini, size 0x20 lma 19520
=>  Loading section .rodata, size 0x2b84 lma 19540
=>  Loading section .eh_frame_hdr, size 0xfec lma 1c0c4
=>  Loading section .eh_frame, size 0x5338 lma 1d0b0
=>  Loading section .ctors, size 0x8 lma 223e8
=>  Loading section .dtors, size 0x8 lma 223f0
=>  Loading section .got2, size 0x2c lma 223f8
=>  Loading section .rtemsroset, size 0x88 lma 22424
=>  Loading section .data, size 0x3e4 lma 224b0
=>  Loading section .sdata, size 0xb1 lma 22898
=>  Start address 4
=>  Transfer rate: 1133064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/irqs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1330/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1322 W:0    | mipstx39/jmr3904: libfdt01.exe
Result: invalid   
Time: 0:00:00.275059 libfdt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/libfdt01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/libfdt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15908 lma 0
=>  Loading section .init, size 0x40 lma 15908
=>  Loading section .fini, size 0x20 lma 15948
=>  Loading section .rodata, size 0x238c lma 15968
=>  Loading section .eh_frame_hdr, size 0xd44 lma 17cf4
=>  Loading section .eh_frame, size 0x462c lma 18a38
=>  Loading section .ctors, size 0x8 lma 1d064
=>  Loading section .dtors, size 0x8 lma 1d06c
=>  Loading section .got2, size 0x2c lma 1d074
=>  Loading section .rtemsroset, size 0x70 lma 1d0a0
=>  Loading section .data, size 0x368 lma 1d110
=>  Loading section .sdata, size 0xa9 lma 1d478
=>  Start address 4
=>  Transfer rate: 960776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/libfdt01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1331/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1323 W:0    | mipstx39/jmr3904: malloc02.exe
Result: invalid   
Time: 0:00:00.254427 malloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/malloc02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/malloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14288 lma 0
=>  Loading section .init, size 0x40 lma 14288
=>  Loading section .fini, size 0x20 lma 142c8
=>  Loading section .rodata, size 0x2454 lma 142e8
=>  Loading section .eh_frame_hdr, size 0xce4 lma 1673c
=>  Loading section .eh_frame, size 0x4288 lma 17420
=>  Loading section .ctors, size 0x8 lma 1b6a8
=>  Loading section .dtors, size 0x8 lma 1b6b0
=>  Loading section .got2, size 0x2c lma 1b6b8
=>  Loading section .rtemsroset, size 0x74 lma 1b6e4
=>  Loading section .data, size 0x398 lma 1b758
=>  Loading section .sdata, size 0xa9 lma 1baf0
=>  Start address 4
=>  Transfer rate: 908488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/malloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1332/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1324 W:0    | mipstx39/jmr3904: malloc03.exe
Result: invalid   
Time: 0:00:00.261660 malloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/malloc03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/malloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12d20 lma 0
=>  Loading section .init, size 0x40 lma 12d20
=>  Loading section .fini, size 0x20 lma 12d60
=>  Loading section .rodata, size 0x1ef0 lma 12d80
=>  Loading section .eh_frame_hdr, size 0xbe4 lma 14c70
=>  Loading section .eh_frame, size 0x3df8 lma 15854
=>  Loading section .ctors, size 0x8 lma 1964c
=>  Loading section .dtors, size 0x8 lma 19654
=>  Loading section .got2, size 0x2c lma 1965c
=>  Loading section .rtemsroset, size 0x6c lma 19688
=>  Loading section .data, size 0x34c lma 196f8
=>  Loading section .sdata, size 0x91 lma 19a44
=>  Start address 4
=>  Transfer rate: 841352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/malloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1333/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1324 W:0    | mipstx39/jmr3904: malloc04.exe
Result: invalid   
Time: 0:00:00.260004 malloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/malloc04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/malloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x140e8 lma 0
=>  Loading section .init, size 0x40 lma 140e8
=>  Loading section .fini, size 0x20 lma 14128
=>  Loading section .rodata, size 0x2054 lma 14148
=>  Loading section .eh_frame_hdr, size 0xc84 lma 1619c
=>  Loading section .eh_frame, size 0x40d8 lma 16e20
=>  Loading section .ctors, size 0x8 lma 1aef8
=>  Loading section .dtors, size 0x8 lma 1af00
=>  Loading section .got2, size 0x2c lma 1af08
=>  Loading section .rtemsroset, size 0x6c lma 1af34
=>  Loading section .data, size 0x364 lma 1afa0
=>  Loading section .sdata, size 0xa5 lma 1b308
=>  Start address 4
=>  Transfer rate: 892232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/malloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1334/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1325 W:0    | mipstx39/jmr3904: malloctest.exe
Result: invalid   
Time: 0:00:00.507025 malloctest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/malloctest.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/malloctest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a5e8 lma 0
=>  Loading section .init, size 0x40 lma 1a5e8
=>  Loading section .fini, size 0x20 lma 1a628
=>  Loading section .rodata, size 0x4660 lma 1a648
=>  Loading section .eh_frame_hdr, size 0xf04 lma 1eca8
=>  Loading section .eh_frame, size 0x4fb8 lma 1fbac
=>  Loading section .tdata, size 0x8 lma 24b68
=>  Loading section .ctors, size 0x8 lma 24b70
=>  Loading section .dtors, size 0x8 lma 24b78
=>  Loading section .got2, size 0x2c lma 24b80
=>  Loading section .rtemsroset, size 0x74 lma 24bac
=>  Loading section .data, size 0x53c lma 24c20
=>  Loading section .sdata, size 0xb9 lma 25160
=>  Start address 4
=>  Transfer rate: 1216648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/malloctest.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1335/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1325 W:0    | mipstx39/jmr3904: math.exe
Result: invalid   
Time: 0:00:00.274325 math.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/math.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/math.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2723c lma 0
=>  Loading section .init, size 0x40 lma 2723c
=>  Loading section .fini, size 0x20 lma 2727c
=>  Loading section .rodata, size 0x3d8b lma 272a0
=>  Loading section .eh_frame_hdr, size 0x11bc lma 2b02c
=>  Loading section .eh_frame, size 0x6b34 lma 2c1e8
=>  Loading section .tdata, size 0xc lma 32d1c
=>  Loading section .ctors, size 0x8 lma 32d28
=>  Loading section .dtors, size 0x8 lma 32d30
=>  Loading section .got2, size 0x2c lma 32d38
=>  Loading section .rtemsroset, size 0x6c lma 32d64
=>  Loading section .data, size 0x514 lma 32dd0
=>  Loading section .sdata, size 0x99 lma 332e4
=>  Start address 4
=>  Transfer rate: 1678272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/math.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1336/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1331 W:0    | mipstx39/jmr3904: mathf.exe
Result: invalid   
Time: 0:00:00.252696 mathf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/mathf.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/mathf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x261d8 lma 0
=>  Loading section .init, size 0x40 lma 261d8
=>  Loading section .fini, size 0x20 lma 26218
=>  Loading section .rodata, size 0x375b lma 26238
=>  Loading section .eh_frame_hdr, size 0x11f4 lma 29994
=>  Loading section .eh_frame, size 0x69f0 lma 2ab88
=>  Loading section .tdata, size 0xc lma 31578
=>  Loading section .ctors, size 0x8 lma 31584
=>  Loading section .dtors, size 0x8 lma 3158c
=>  Loading section .got2, size 0x2c lma 31594
=>  Loading section .rtemsroset, size 0x6c lma 315c0
=>  Loading section .data, size 0x500 lma 31630
=>  Loading section .sdata, size 0x99 lma 31b30
=>  Start address 4
=>  Transfer rate: 1629728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/mathf.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1337/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1331 W:0    | mipstx39/jmr3904: mathl.exe
Result: invalid   
Time: 0:00:00.262349 mathl.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/mathl.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/mathl.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b2c4 lma 0
=>  Loading section .init, size 0x40 lma 1b2c4
=>  Loading section .fini, size 0x20 lma 1b304
=>  Loading section .rodata, size 0x245b lma 1b328
=>  Loading section .eh_frame_hdr, size 0xe84 lma 1d784
=>  Loading section .eh_frame, size 0x4fe0 lma 1e608
=>  Loading section .tdata, size 0xc lma 235e8
=>  Loading section .ctors, size 0x8 lma 235f4
=>  Loading section .dtors, size 0x8 lma 235fc
=>  Loading section .got2, size 0x2c lma 23604
=>  Loading section .rtemsroset, size 0x6c lma 23630
=>  Loading section .data, size 0x4ec lma 236a0
=>  Loading section .sdata, size 0x99 lma 23b8c
=>  Start address 4
=>  Transfer rate: 1171680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/mathl.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1338/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1332 W:0    | mipstx39/jmr3904: md501.exe
Result: invalid   
Time: 0:00:00.521156 md501.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/md501.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/md501.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ae8 lma 0
=>  Loading section .init, size 0x40 lma 14ae8
=>  Loading section .fini, size 0x20 lma 14b28
=>  Loading section .rodata, size 0x2234 lma 14b48
=>  Loading section .eh_frame_hdr, size 0xc94 lma 16d7c
=>  Loading section .eh_frame, size 0x41ac lma 17a10
=>  Loading section .ctors, size 0x8 lma 1bbbc
=>  Loading section .dtors, size 0x8 lma 1bbc4
=>  Loading section .got2, size 0x2c lma 1bbcc
=>  Loading section .rtemsroset, size 0x70 lma 1bbf8
=>  Loading section .data, size 0x3a8 lma 1bc68
=>  Loading section .sdata, size 0xb9 lma 1c010
=>  Start address 4
=>  Transfer rate: 919112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/md501.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1339/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1332 W:0    | mipstx39/jmr3904: monitor.exe
Result: invalid   
Time: 0:00:00.561821 monitor.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/monitor.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/monitor.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2b458 lma 0
=>  Loading section .init, size 0x40 lma 2b458
=>  Loading section .fini, size 0x20 lma 2b498
=>  Loading section .rodata, size 0x4d3c lma 2b4b8
=>  Loading section .eh_frame_hdr, size 0x15ec lma 301f4
=>  Loading section .eh_frame, size 0x7ca8 lma 317e0
=>  Loading section .tdata, size 0xc lma 39488
=>  Loading section .ctors, size 0x8 lma 39494
=>  Loading section .dtors, size 0x8 lma 3949c
=>  Loading section .got2, size 0x2c lma 394a4
=>  Loading section .rtemsroset, size 0x74 lma 394d0
=>  Loading section .data, size 0x704 lma 39548
=>  Loading section .sdata, size 0xd0 lma 39c50
=>  Start address 4
=>  Transfer rate: 1894592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/monitor.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1340/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1332 W:0    | mipstx39/jmr3904: monitor02.exe
Result: invalid   
Time: 0:00:00.251875 monitor02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/monitor02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/monitor02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24214 lma 0
=>  Loading section .init, size 0x40 lma 24214
=>  Loading section .fini, size 0x20 lma 24254
=>  Loading section .rodata, size 0x3bdc lma 24278
=>  Loading section .eh_frame_hdr, size 0x1264 lma 27e54
=>  Loading section .eh_frame, size 0x66b0 lma 290b8
=>  Loading section .tdata, size 0xc lma 2f768
=>  Loading section .ctors, size 0x8 lma 2f774
=>  Loading section .dtors, size 0x8 lma 2f77c
=>  Loading section .got2, size 0x2c lma 2f784
=>  Loading section .rtemsroset, size 0x80 lma 2f7b0
=>  Loading section .data, size 0x7a4 lma 2f830
=>  Loading section .sdata, size 0xbc lma 2ffd8
=>  Start address 4
=>  Transfer rate: 1573984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/monitor02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1341/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1332 W:0    | mipstx39/jmr3904: mouse01.exe
Result: invalid   
Time: 0:00:00.256910 mouse01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/mouse01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/mouse01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20430 lma 0
=>  Loading section .init, size 0x40 lma 20430
=>  Loading section .fini, size 0x20 lma 20470
=>  Loading section .rodata, size 0x2d22 lma 20490
=>  Loading section .eh_frame_hdr, size 0x1194 lma 231b4
=>  Loading section .eh_frame, size 0x606c lma 24348
=>  Loading section .ctors, size 0x8 lma 2a3b4
=>  Loading section .dtors, size 0x8 lma 2a3bc
=>  Loading section .got2, size 0x2c lma 2a3c4
=>  Loading section .rtemsroset, size 0x7c lma 2a3f0
=>  Loading section .data, size 0x580 lma 2a470
=>  Loading section .sdata, size 0xdd lma 2a9f0
=>  Start address 4
=>  Transfer rate: 1398328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/mouse01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1342/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1336 W:0    | mipstx39/jmr3904: newlib01.exe
Result: invalid   
Time: 0:00:00.258200 newlib01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/newlib01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/newlib01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1950c lma 0
=>  Loading section .init, size 0x40 lma 1950c
=>  Loading section .fini, size 0x20 lma 1954c
=>  Loading section .rodata, size 0x2324 lma 19570
=>  Loading section .eh_frame_hdr, size 0xfbc lma 1b894
=>  Loading section .eh_frame, size 0x52dc lma 1c850
=>  Loading section .tdata, size 0x24 lma 21b30
=>  Loading section .ctors, size 0x8 lma 21b54
=>  Loading section .dtors, size 0x8 lma 21b5c
=>  Loading section .got2, size 0x2c lma 21b64
=>  Loading section .rtemsroset, size 0x74 lma 21b90
=>  Loading section .data, size 0x3a0 lma 21c08
=>  Loading section .sdata, size 0xa9 lma 21fa8
=>  Start address 4
=>  Transfer rate: 1114664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/newlib01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1343/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1336 W:0    | mipstx39/jmr3904: ofw01.exe
Result: invalid   
Time: 0:00:00.546475 ofw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/ofw01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/ofw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16e40 lma 0
=>  Loading section .init, size 0x40 lma 16e40
=>  Loading section .fini, size 0x20 lma 16e80
=>  Loading section .rodata, size 0x25a0 lma 16ea0
=>  Loading section .eh_frame_hdr, size 0xe04 lma 19440
=>  Loading section .eh_frame, size 0x4b28 lma 1a244
=>  Loading section .ctors, size 0x8 lma 1ed6c
=>  Loading section .dtors, size 0x8 lma 1ed74
=>  Loading section .got2, size 0x2c lma 1ed7c
=>  Loading section .rtemsroset, size 0x74 lma 1eda8
=>  Loading section .data, size 0x368 lma 1ee20
=>  Loading section .sdata, size 0xb1 lma 1f188
=>  Start address 4
=>  Transfer rate: 1020328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/ofw01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1344/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1337 W:0    | mipstx39/jmr3904: putenvtest.exe
Result: invalid   
Time: 0:00:00.529310 putenvtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/putenvtest.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/putenvtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x146d4 lma 0
=>  Loading section .init, size 0x40 lma 146d4
=>  Loading section .fini, size 0x20 lma 14714
=>  Loading section .rodata, size 0x1f94 lma 14738
=>  Loading section .eh_frame_hdr, size 0xcec lma 166cc
=>  Loading section .eh_frame, size 0x4368 lma 173b8
=>  Loading section .ctors, size 0x8 lma 1b720
=>  Loading section .dtors, size 0x8 lma 1b728
=>  Loading section .got2, size 0x2c lma 1b730
=>  Loading section .rtemsroset, size 0x70 lma 1b75c
=>  Loading section .data, size 0x368 lma 1b7d0
=>  Loading section .sdata, size 0xb0 lma 1bb38
=>  Start address 4
=>  Transfer rate: 909056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/putenvtest.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1345/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1336 W:0    | mipstx39/jmr3904: pwdgrp01.exe
Result: invalid   
Time: 0:00:00.534132 pwdgrp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/pwdgrp01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/pwdgrp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18030 lma 0
=>  Loading section .init, size 0x40 lma 18030
=>  Loading section .fini, size 0x20 lma 18070
=>  Loading section .rodata, size 0x231d lma 18090
=>  Loading section .eh_frame_hdr, size 0xee4 lma 1a3b0
=>  Loading section .eh_frame, size 0x4f7c lma 1b294
=>  Loading section .tdata, size 0xc lma 20210
=>  Loading section .ctors, size 0x8 lma 2021c
=>  Loading section .dtors, size 0x8 lma 20224
=>  Loading section .got2, size 0x2c lma 2022c
=>  Loading section .rtemsroset, size 0x70 lma 20258
=>  Loading section .data, size 0x3e8 lma 202c8
=>  Loading section .sdata, size 0x95 lma 206b0
=>  Start address 4
=>  Transfer rate: 1063440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/pwdgrp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1346/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1336 W:0    | mipstx39/jmr3904: pwdgrp02.exe
Result: invalid   
Time: 0:00:00.256534 pwdgrp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/pwdgrp02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/pwdgrp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16c60 lma 0
=>  Loading section .init, size 0x40 lma 16c60
=>  Loading section .fini, size 0x20 lma 16ca0
=>  Loading section .rodata, size 0x2295 lma 16cc0
=>  Loading section .eh_frame_hdr, size 0xe44 lma 18f58
=>  Loading section .eh_frame, size 0x4b24 lma 19d9c
=>  Loading section .tdata, size 0xc lma 1e8c0
=>  Loading section .ctors, size 0x8 lma 1e8cc
=>  Loading section .dtors, size 0x8 lma 1e8d4
=>  Loading section .got2, size 0x2c lma 1e8dc
=>  Loading section .rtemsroset, size 0x6c lma 1e908
=>  Loading section .data, size 0x380 lma 1e978
=>  Loading section .sdata, size 0x91 lma 1ecf8
=>  Start address 4
=>  Transfer rate: 1010704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/pwdgrp02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1347/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1337 W:0    | mipstx39/jmr3904: rbheap01.exe
Result: invalid   
Time: 0:00:00.280176 rbheap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/rbheap01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/rbheap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x152c8 lma 0
=>  Loading section .init, size 0x40 lma 152c8
=>  Loading section .fini, size 0x20 lma 15308
=>  Loading section .rodata, size 0x2260 lma 15328
=>  Loading section .eh_frame_hdr, size 0xd1c lma 17588
=>  Loading section .eh_frame, size 0x4564 lma 182a4
=>  Loading section .ctors, size 0x8 lma 1c808
=>  Loading section .dtors, size 0x8 lma 1c810
=>  Loading section .got2, size 0x2c lma 1c818
=>  Loading section .rtemsroset, size 0x70 lma 1c844
=>  Loading section .data, size 0x364 lma 1c8b8
=>  Loading section .sdata, size 0xe1 lma 1cc20
=>  Start address 4
=>  Transfer rate: 944072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/rbheap01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1348/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1341 W:0    | mipstx39/jmr3904: rcxx01.exe
Result: invalid   
Time: 0:00:00.783592 rcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/rcxx01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/rcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x99974 lma 0
=>  Loading section .init, size 0x40 lma 99974
=>  Loading section .fini, size 0x20 lma 999b4
=>  Loading section .rodata, size 0xaee4 lma 999d8
=>  Loading section .eh_frame_hdr, size 0x3abc lma a48bc
=>  Loading section .eh_frame, size 0x17dd8 lma a8378
=>  Loading section .gcc_except_table, size 0x1f49 lma c0150
=>  Loading section .tdata, size 0xc lma c209c
=>  Loading section .ctors, size 0x38 lma c20a8
=>  Loading section .dtors, size 0x8 lma c20e0
=>  Loading section .got2, size 0x2c lma c20e8
=>  Loading section .rtemsroset, size 0x7c lma c2114
=>  Loading section .data, size 0x66c lma c2190
=>  Loading section .sdata, size 0x1a4 lma c2800
=>  Start address 4
=>  Transfer rate: 6376648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/rcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00000004 in std::set_unexpected (func=0x0 <std::set_unexpected(void (*)())>) at ../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc:108
=>  108	../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc: No such file or directory.
[1349/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1341 W:0    | mipstx39/jmr3904: record01.exe
Result: invalid   
Time: 0:00:00.280815 record01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/record01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/record01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15308 lma 0
=>  Loading section .init, size 0x40 lma 15308
=>  Loading section .fini, size 0x20 lma 15348
=>  Loading section .rodata, size 0x2478 lma 15368
=>  Loading section .eh_frame_hdr, size 0xc9c lma 177e0
=>  Loading section .eh_frame, size 0x4198 lma 1847c
=>  Loading section .ctors, size 0x8 lma 1c614
=>  Loading section .dtors, size 0x8 lma 1c61c
=>  Loading section .got2, size 0x2c lma 1c624
=>  Loading section .rtemsroset, size 0x70 lma 1c650
=>  Loading section .data, size 0x368 lma 1c6c0
=>  Loading section .sdata, size 0xa9 lma 1ca28
=>  Start address 4
=>  Transfer rate: 939656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/record01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1350/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1341 W:0    | mipstx39/jmr3904: record02.exe
Result: invalid   
Time: 0:00:00.537892 record02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/record02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/record02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1cb44 lma 0
=>  Loading section .init, size 0x40 lma 1cb44
=>  Loading section .fini, size 0x20 lma 1cb84
=>  Loading section .rodata, size 0x91a4 lma 1cba8
=>  Loading section .eh_frame_hdr, size 0x104c lma 25d4c
=>  Loading section .eh_frame, size 0x5658 lma 26d98
=>  Loading section .ctors, size 0x8 lma 2c3f0
=>  Loading section .dtors, size 0x8 lma 2c3f8
=>  Loading section .got2, size 0x2c lma 2c400
=>  Loading section .rtemsroset, size 0x78 lma 2c42c
=>  Loading section .data, size 0x3a4 lma 2c4a8
=>  Loading section .sdata, size 0xb1 lma 2c850
=>  Start address 4
=>  Transfer rate: 1460136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/record02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1351/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1341 W:0    | mipstx39/jmr3904: rtmonuse.exe
Result: invalid   
Time: 0:00:00.252170 rtmonuse.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/rtmonuse.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/rtmonuse.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1646c lma 0
=>  Loading section .init, size 0x40 lma 1646c
=>  Loading section .fini, size 0x20 lma 164ac
=>  Loading section .rodata, size 0x28e1 lma 164d0
=>  Loading section .eh_frame_hdr, size 0xd8c lma 18db4
=>  Loading section .eh_frame, size 0x4968 lma 19b40
=>  Loading section .ctors, size 0x8 lma 1e4a8
=>  Loading section .dtors, size 0x8 lma 1e4b0
=>  Loading section .got2, size 0x2c lma 1e4b8
=>  Loading section .rtemsroset, size 0x74 lma 1e4e4
=>  Loading section .data, size 0x3dc lma 1e558
=>  Loading section .sdata, size 0xa9 lma 1e938
=>  Start address 4
=>  Transfer rate: 1003184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/rtmonuse.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1352/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1345 W:0    | mipstx39/jmr3904: sha.exe
Result: invalid   
Time: 0:00:00.260505 sha.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/sha.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/sha.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17828 lma 0
=>  Loading section .init, size 0x40 lma 17828
=>  Loading section .fini, size 0x20 lma 17868
=>  Loading section .rodata, size 0x2b83 lma 17888
=>  Loading section .eh_frame_hdr, size 0xd14 lma 1a40c
=>  Loading section .eh_frame, size 0x4428 lma 1b120
=>  Loading section .ctors, size 0x8 lma 1f548
=>  Loading section .dtors, size 0x8 lma 1f550
=>  Loading section .got2, size 0x2c lma 1f558
=>  Loading section .rtemsroset, size 0x70 lma 1f584
=>  Loading section .data, size 0x348 lma 1f5f8
=>  Loading section .sdata, size 0x95 lma 1f940
=>  Start address 4
=>  Transfer rate: 1035904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/sha.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1353/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1346 W:0    | mipstx39/jmr3904: shell01.exe
Result: invalid   
Time: 0:00:00.515368 shell01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/shell01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/shell01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x35d94 lma 0
=>  Loading section .init, size 0x40 lma 35d94
=>  Loading section .fini, size 0x20 lma 35dd4
=>  Loading section .rodata, size 0x625a lma 35df8
=>  Loading section .eh_frame_hdr, size 0x185c lma 3c054
=>  Loading section .eh_frame, size 0x92a4 lma 3d8b0
=>  Loading section .tdata, size 0xc lma 46b54
=>  Loading section .ctors, size 0x8 lma 46b60
=>  Loading section .dtors, size 0x8 lma 46b68
=>  Loading section .got2, size 0x2c lma 46b70
=>  Loading section .rtemsroset, size 0x78 lma 46b9c
=>  Loading section .data, size 0x880 lma 46c18
=>  Loading section .sdata, size 0xc4 lma 47498
=>  Start address 4
=>  Transfer rate: 2337424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/shell01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1354/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1346 W:0    | mipstx39/jmr3904: sparsedisk01.exe
Result: invalid   
Time: 0:00:00.548785 sparsedisk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/sparsedisk01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/sparsedisk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b02c lma 0
=>  Loading section .init, size 0x40 lma 1b02c
=>  Loading section .fini, size 0x20 lma 1b06c
=>  Loading section .rodata, size 0x2304 lma 1b090
=>  Loading section .eh_frame_hdr, size 0xf54 lma 1d394
=>  Loading section .eh_frame, size 0x5648 lma 1e2e8
=>  Loading section .ctors, size 0x8 lma 23930
=>  Loading section .dtors, size 0x8 lma 23938
=>  Loading section .got2, size 0x2c lma 23940
=>  Loading section .rtemsroset, size 0x70 lma 2396c
=>  Loading section .data, size 0x38c lma 239e0
=>  Loading section .sdata, size 0xa5 lma 23d70
=>  Start address 4
=>  Transfer rate: 1175624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/sparsedisk01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1355/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1347 W:0    | mipstx39/jmr3904: spi01.exe
Result: invalid   
Time: 0:00:00.516010 spi01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/spi01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/spi01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x159a8 lma 0
=>  Loading section .init, size 0x40 lma 159a8
=>  Loading section .fini, size 0x20 lma 159e8
=>  Loading section .rodata, size 0x223c lma 15a08
=>  Loading section .eh_frame_hdr, size 0xd84 lma 17c44
=>  Loading section .eh_frame, size 0x45bc lma 189c8
=>  Loading section .ctors, size 0x8 lma 1cf84
=>  Loading section .dtors, size 0x8 lma 1cf8c
=>  Loading section .got2, size 0x2c lma 1cf94
=>  Loading section .rtemsroset, size 0x70 lma 1cfc0
=>  Loading section .data, size 0x394 lma 1d030
=>  Loading section .sdata, size 0xbd lma 1d3c8
=>  Start address 4
=>  Transfer rate: 959496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/spi01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1356/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1347 W:0    | mipstx39/jmr3904: stackchk.exe
Result: invalid   
Time: 0:00:00.283209 stackchk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/stackchk.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/stackchk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15ab4 lma 0
=>  Loading section .init, size 0x40 lma 15ab4
=>  Loading section .fini, size 0x20 lma 15af4
=>  Loading section .rodata, size 0x2909 lma 15b18
=>  Loading section .eh_frame_hdr, size 0xdc4 lma 18424
=>  Loading section .eh_frame, size 0x4634 lma 191e8
=>  Loading section .ctors, size 0x8 lma 1d81c
=>  Loading section .dtors, size 0x8 lma 1d824
=>  Loading section .got2, size 0x2c lma 1d82c
=>  Loading section .rtemsroset, size 0x74 lma 1d858
=>  Loading section .data, size 0x510 lma 1d8d0
=>  Loading section .sdata, size 0xb9 lma 1dde0
=>  Start address 4
=>  Transfer rate: 980080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/stackchk.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1357/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1347 W:0    | mipstx39/jmr3904: stackchk01.exe
Result: invalid   
Time: 0:00:00.531611 stackchk01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/stackchk01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/stackchk01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13124 lma 0
=>  Loading section .init, size 0x40 lma 13124
=>  Loading section .fini, size 0x20 lma 13164
=>  Loading section .rodata, size 0x2087 lma 13188
=>  Loading section .eh_frame_hdr, size 0xc1c lma 15210
=>  Loading section .eh_frame, size 0x3ef0 lma 15e2c
=>  Loading section .ctors, size 0x8 lma 19d1c
=>  Loading section .dtors, size 0x8 lma 19d24
=>  Loading section .got2, size 0x2c lma 19d2c
=>  Loading section .rtemsroset, size 0x70 lma 19d58
=>  Loading section .data, size 0x348 lma 19dc8
=>  Loading section .sdata, size 0x91 lma 1a110
=>  Start address 4
=>  Transfer rate: 855264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/stackchk01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1358/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1349 W:0    | mipstx39/jmr3904: stackchk02.exe
Result: invalid   
Time: 0:00:00.252729 stackchk02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/stackchk02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/stackchk02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13014 lma 0
=>  Loading section .init, size 0x40 lma 13014
=>  Loading section .fini, size 0x20 lma 13054
=>  Loading section .rodata, size 0x1fcb lma 13078
=>  Loading section .eh_frame_hdr, size 0xc04 lma 15044
=>  Loading section .eh_frame, size 0x3ec0 lma 15c48
=>  Loading section .ctors, size 0x8 lma 19b08
=>  Loading section .dtors, size 0x8 lma 19b10
=>  Loading section .got2, size 0x2c lma 19b18
=>  Loading section .rtemsroset, size 0x70 lma 19b44
=>  Loading section .data, size 0x348 lma 19bb8
=>  Loading section .sdata, size 0x91 lma 19f00
=>  Start address 4
=>  Transfer rate: 851008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/stackchk02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1359/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1349 W:0    | mipstx39/jmr3904: stringto01.exe
Result: invalid   
Time: 0:00:00.265082 stringto01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/stringto01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/stringto01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b0e4 lma 0
=>  Loading section .init, size 0x40 lma 1b0e4
=>  Loading section .fini, size 0x20 lma 1b124
=>  Loading section .rodata, size 0x3da3 lma 1b148
=>  Loading section .eh_frame_hdr, size 0xdfc lma 1eeec
=>  Loading section .eh_frame, size 0x4e5c lma 1fce8
=>  Loading section .ctors, size 0x8 lma 24b44
=>  Loading section .dtors, size 0x8 lma 24b4c
=>  Loading section .got2, size 0x2c lma 24b54
=>  Loading section .rtemsroset, size 0x6c lma 24b80
=>  Loading section .data, size 0x4b8 lma 24bf0
=>  Loading section .sdata, size 0x91 lma 250a8
=>  Start address 4
=>  Transfer rate: 1214848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/stringto01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1360/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1355 W:0    | mipstx39/jmr3904: tar01.exe
Result: invalid   
Time: 0:00:00.277901 tar01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/tar01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/tar01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19eb0 lma 0
=>  Loading section .init, size 0x40 lma 19eb0
=>  Loading section .fini, size 0x20 lma 19ef0
=>  Loading section .rodata, size 0x8c10 lma 19f10
=>  Loading section .eh_frame_hdr, size 0xd94 lma 22b20
=>  Loading section .eh_frame, size 0x49b8 lma 238b4
=>  Loading section .ctors, size 0x8 lma 2826c
=>  Loading section .dtors, size 0x8 lma 28274
=>  Loading section .got2, size 0x2c lma 2827c
=>  Loading section .rtemsroset, size 0x6c lma 282a8
=>  Loading section .data, size 0x348 lma 28318
=>  Loading section .sdata, size 0xb1 lma 28660
=>  Start address 4
=>  Transfer rate: 1325160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/tar01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1361/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1355 W:0    | mipstx39/jmr3904: tar02.exe
Result: invalid   
Time: 0:00:00.259601 tar02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/tar02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/tar02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14f30 lma 0
=>  Loading section .init, size 0x40 lma 14f30
=>  Loading section .fini, size 0x20 lma 14f70
=>  Loading section .rodata, size 0x57d8 lma 14f90
=>  Loading section .eh_frame_hdr, size 0xcec lma 1a768
=>  Loading section .eh_frame, size 0x4388 lma 1b454
=>  Loading section .ctors, size 0x8 lma 1f7dc
=>  Loading section .dtors, size 0x8 lma 1f7e4
=>  Loading section .got2, size 0x2c lma 1f7ec
=>  Loading section .rtemsroset, size 0x6c lma 1f818
=>  Loading section .data, size 0x348 lma 1f888
=>  Loading section .sdata, size 0xad lma 1fbd0
=>  Start address 4
=>  Transfer rate: 1041352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/tar02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1362/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1356 W:0    | mipstx39/jmr3904: tar03.exe
Result: invalid   
Time: 0:00:00.290024 tar03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/tar03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/tar03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15174 lma 0
=>  Loading section .init, size 0x40 lma 15174
=>  Loading section .fini, size 0x20 lma 151b4
=>  Loading section .rodata, size 0x2af4 lma 151d8
=>  Loading section .eh_frame_hdr, size 0xd1c lma 17ccc
=>  Loading section .eh_frame, size 0x4430 lma 189e8
=>  Loading section .ctors, size 0x8 lma 1ce18
=>  Loading section .dtors, size 0x8 lma 1ce20
=>  Loading section .got2, size 0x2c lma 1ce28
=>  Loading section .rtemsroset, size 0x70 lma 1ce54
=>  Loading section .data, size 0x368 lma 1cec8
=>  Loading section .sdata, size 0xb1 lma 1d230
=>  Start address 4
=>  Transfer rate: 956104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/tar03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1363/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1357 W:0    | mipstx39/jmr3904: termios.exe
Result: invalid   
Time: 0:00:00.262856 termios.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x280f4 lma 0
=>  Loading section .init, size 0x40 lma 280f4
=>  Loading section .fini, size 0x20 lma 28134
=>  Loading section .rodata, size 0x487a lma 28158
=>  Loading section .eh_frame_hdr, size 0x12bc lma 2c9d4
=>  Loading section .eh_frame, size 0x6c98 lma 2dc90
=>  Loading section .tdata, size 0xc lma 34928
=>  Loading section .ctors, size 0x8 lma 34934
=>  Loading section .dtors, size 0x8 lma 3493c
=>  Loading section .got2, size 0x2c lma 34944
=>  Loading section .rtemsroset, size 0x70 lma 34970
=>  Loading section .data, size 0x4d8 lma 349e0
=>  Loading section .sdata, size 0xc1 lma 34eb8
=>  Start address 4
=>  Transfer rate: 1735576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1364/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1357 W:0    | mipstx39/jmr3904: termios01.exe
Result: invalid   
Time: 0:00:00.537360 termios01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b8fc lma 0
=>  Loading section .init, size 0x40 lma 1b8fc
=>  Loading section .fini, size 0x20 lma 1b93c
=>  Loading section .rodata, size 0x4068 lma 1b960
=>  Loading section .eh_frame_hdr, size 0x1054 lma 1f9c8
=>  Loading section .eh_frame, size 0x5728 lma 20a1c
=>  Loading section .ctors, size 0x8 lma 26144
=>  Loading section .dtors, size 0x8 lma 2614c
=>  Loading section .got2, size 0x2c lma 26154
=>  Loading section .rtemsroset, size 0x74 lma 26180
=>  Loading section .data, size 0x408 lma 261f8
=>  Loading section .sdata, size 0xe1 lma 26600
=>  Start address 4
=>  Transfer rate: 1259208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1365/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1357 W:0    | mipstx39/jmr3904: termios02.exe
Result: invalid   
Time: 0:00:00.253949 termios02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17420 lma 0
=>  Loading section .init, size 0x40 lma 17420
=>  Loading section .fini, size 0x20 lma 17460
=>  Loading section .rodata, size 0x234d lma 17480
=>  Loading section .eh_frame_hdr, size 0xe2c lma 197d0
=>  Loading section .eh_frame, size 0x4b98 lma 1a5fc
=>  Loading section .ctors, size 0x8 lma 1f194
=>  Loading section .dtors, size 0x8 lma 1f19c
=>  Loading section .got2, size 0x2c lma 1f1a4
=>  Loading section .rtemsroset, size 0x6c lma 1f1d0
=>  Loading section .data, size 0x338 lma 1f240
=>  Loading section .sdata, size 0xa1 lma 1f578
=>  Start address 4
=>  Transfer rate: 1028240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1366/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1357 W:0    | mipstx39/jmr3904: termios03.exe
Result: invalid   
Time: 0:00:00.503973 termios03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x185b8 lma 0
=>  Loading section .init, size 0x40 lma 185b8
=>  Loading section .fini, size 0x20 lma 185f8
=>  Loading section .rodata, size 0x27c5 lma 18618
=>  Loading section .eh_frame_hdr, size 0xefc lma 1ade0
=>  Loading section .eh_frame, size 0x5008 lma 1bcdc
=>  Loading section .ctors, size 0x8 lma 20ce4
=>  Loading section .dtors, size 0x8 lma 20cec
=>  Loading section .got2, size 0x2c lma 20cf4
=>  Loading section .rtemsroset, size 0x74 lma 20d20
=>  Loading section .data, size 0x390 lma 20d98
=>  Loading section .sdata, size 0xc9 lma 21128
=>  Start address 4
=>  Transfer rate: 1085264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1367/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1357 W:0    | mipstx39/jmr3904: termios04.exe
Result: invalid   
Time: 0:00:00.278845 termios04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18878 lma 0
=>  Loading section .init, size 0x40 lma 18878
=>  Loading section .fini, size 0x20 lma 188b8
=>  Loading section .rodata, size 0x2709 lma 188d8
=>  Loading section .eh_frame_hdr, size 0xf54 lma 1afe4
=>  Loading section .eh_frame, size 0x51c0 lma 1bf38
=>  Loading section .ctors, size 0x8 lma 210f8
=>  Loading section .dtors, size 0x8 lma 21100
=>  Loading section .got2, size 0x2c lma 21108
=>  Loading section .rtemsroset, size 0x78 lma 21134
=>  Loading section .data, size 0x3c0 lma 211b0
=>  Loading section .sdata, size 0xc1 lma 21570
=>  Start address 4
=>  Transfer rate: 1093968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1368/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1362 W:0    | mipstx39/jmr3904: termios05.exe
Result: invalid   
Time: 0:00:00.263651 termios05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18c38 lma 0
=>  Loading section .init, size 0x40 lma 18c38
=>  Loading section .fini, size 0x20 lma 18c78
=>  Loading section .rodata, size 0x2765 lma 18c98
=>  Loading section .eh_frame_hdr, size 0xf7c lma 1b400
=>  Loading section .eh_frame, size 0x5298 lma 1c37c
=>  Loading section .ctors, size 0x8 lma 21614
=>  Loading section .dtors, size 0x8 lma 2161c
=>  Loading section .got2, size 0x2c lma 21624
=>  Loading section .rtemsroset, size 0x78 lma 21650
=>  Loading section .data, size 0x3c0 lma 216c8
=>  Loading section .sdata, size 0xc9 lma 21a88
=>  Start address 4
=>  Transfer rate: 1104496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1369/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1363 W:0    | mipstx39/jmr3904: termios06.exe
Result: invalid   
Time: 0:00:00.522593 termios06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18a98 lma 0
=>  Loading section .init, size 0x40 lma 18a98
=>  Loading section .fini, size 0x20 lma 18ad8
=>  Loading section .rodata, size 0x28bd lma 18af8
=>  Loading section .eh_frame_hdr, size 0xf5c lma 1b3b8
=>  Loading section .eh_frame, size 0x5190 lma 1c314
=>  Loading section .ctors, size 0x8 lma 214a4
=>  Loading section .dtors, size 0x8 lma 214ac
=>  Loading section .got2, size 0x2c lma 214b4
=>  Loading section .rtemsroset, size 0x74 lma 214e0
=>  Loading section .data, size 0x390 lma 21558
=>  Loading section .sdata, size 0xd1 lma 218e8
=>  Start address 4
=>  Transfer rate: 1101200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1370/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1363 W:0    | mipstx39/jmr3904: termios07.exe
Result: invalid   
Time: 0:00:00.541544 termios07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x189f8 lma 0
=>  Loading section .init, size 0x40 lma 189f8
=>  Loading section .fini, size 0x20 lma 18a38
=>  Loading section .rodata, size 0x278d lma 18a58
=>  Loading section .eh_frame_hdr, size 0xf64 lma 1b1e8
=>  Loading section .eh_frame, size 0x521c lma 1c14c
=>  Loading section .ctors, size 0x8 lma 21368
=>  Loading section .dtors, size 0x8 lma 21370
=>  Loading section .got2, size 0x2c lma 21378
=>  Loading section .rtemsroset, size 0x78 lma 213a4
=>  Loading section .data, size 0x3c0 lma 21420
=>  Loading section .sdata, size 0xc1 lma 217e0
=>  Start address 4
=>  Transfer rate: 1098960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1371/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1363 W:0    | mipstx39/jmr3904: termios08.exe
Result: invalid   
Time: 0:00:00.515226 termios08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18138 lma 0
=>  Loading section .init, size 0x40 lma 18138
=>  Loading section .fini, size 0x20 lma 18178
=>  Loading section .rodata, size 0x26f9 lma 18198
=>  Loading section .eh_frame_hdr, size 0xedc lma 1a894
=>  Loading section .eh_frame, size 0x4f08 lma 1b770
=>  Loading section .ctors, size 0x8 lma 20678
=>  Loading section .dtors, size 0x8 lma 20680
=>  Loading section .got2, size 0x2c lma 20688
=>  Loading section .rtemsroset, size 0x74 lma 206b4
=>  Loading section .data, size 0x390 lma 20728
=>  Loading section .sdata, size 0xc1 lma 20ab8
=>  Start address 4
=>  Transfer rate: 1072048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1372/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1362 W:0    | mipstx39/jmr3904: termios09.exe
Result: invalid   
Time: 0:00:00.263358 termios09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios09.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d368 lma 0
=>  Loading section .init, size 0x40 lma 1d368
=>  Loading section .fini, size 0x20 lma 1d3a8
=>  Loading section .rodata, size 0x28ed lma 1d3c8
=>  Loading section .eh_frame_hdr, size 0xf4c lma 1fcb8
=>  Loading section .eh_frame, size 0x541c lma 20c04
=>  Loading section .ctors, size 0x8 lma 26020
=>  Loading section .dtors, size 0x8 lma 26028
=>  Loading section .got2, size 0x2c lma 26030
=>  Loading section .rtemsroset, size 0x70 lma 2605c
=>  Loading section .data, size 0x54c lma 260d0
=>  Loading section .sdata, size 0xc5 lma 26620
=>  Start address 4
=>  Transfer rate: 1259216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios09.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1373/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1367 W:0    | mipstx39/jmr3904: termios10.exe
Result: invalid   
Time: 0:00:00.513078 termios10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios10.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a164 lma 0
=>  Loading section .init, size 0x40 lma 1a164
=>  Loading section .fini, size 0x20 lma 1a1a4
=>  Loading section .rodata, size 0x2961 lma 1a1c8
=>  Loading section .eh_frame_hdr, size 0x104c lma 1cb2c
=>  Loading section .eh_frame, size 0x566c lma 1db78
=>  Loading section .ctors, size 0x8 lma 231e4
=>  Loading section .dtors, size 0x8 lma 231ec
=>  Loading section .got2, size 0x2c lma 231f4
=>  Loading section .rtemsroset, size 0x7c lma 23220
=>  Loading section .data, size 0x410 lma 232a0
=>  Loading section .sdata, size 0xd9 lma 236b0
=>  Start address 4
=>  Transfer rate: 1162224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios10.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1374/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1366 W:0    | mipstx39/jmr3904: termios11.exe
Result: invalid   
Time: 0:00:00.275352 termios11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/termios11.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/termios11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a7a4 lma 0
=>  Loading section .init, size 0x40 lma 1a7a4
=>  Loading section .fini, size 0x20 lma 1a7e4
=>  Loading section .rodata, size 0x2979 lma 1a808
=>  Loading section .eh_frame_hdr, size 0x10bc lma 1d184
=>  Loading section .eh_frame, size 0x58cc lma 1e240
=>  Loading section .ctors, size 0x8 lma 23b0c
=>  Loading section .dtors, size 0x8 lma 23b14
=>  Loading section .got2, size 0x2c lma 23b1c
=>  Loading section .rtemsroset, size 0x80 lma 23b48
=>  Loading section .data, size 0x440 lma 23bc8
=>  Loading section .sdata, size 0xd9 lma 24008
=>  Start address 4
=>  Transfer rate: 1181392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios11.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1375/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1367 W:0    | mipstx39/jmr3904: top.exe
Result: invalid   
Time: 0:00:00.273683 top.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/top.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/top.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22420 lma 0
=>  Loading section .init, size 0x40 lma 22420
=>  Loading section .fini, size 0x20 lma 22460
=>  Loading section .rodata, size 0x3046 lma 22480
=>  Loading section .eh_frame_hdr, size 0x11dc lma 254c8
=>  Loading section .eh_frame, size 0x63f8 lma 266a4
=>  Loading section .tdata, size 0xc lma 2ca9c
=>  Loading section .ctors, size 0x8 lma 2caa8
=>  Loading section .dtors, size 0x8 lma 2cab0
=>  Loading section .got2, size 0x2c lma 2cab8
=>  Loading section .rtemsroset, size 0x70 lma 2cae4
=>  Loading section .data, size 0x4f4 lma 2cb58
=>  Loading section .sdata, size 0xc8 lma 2d050
=>  Start address 4
=>  Transfer rate: 1476720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/top.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1376/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1367 W:0    | mipstx39/jmr3904: ttest01.exe
Result: invalid   
Time: 0:00:00.570814 ttest01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/ttest01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/ttest01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x27a3c lma 0
=>  Loading section .init, size 0x40 lma 27a3c
=>  Loading section .fini, size 0x20 lma 27a7c
=>  Loading section .rodata, size 0x1c858 lma 27aa0
=>  Loading section .eh_frame_hdr, size 0x1e24 lma 442f8
=>  Loading section .eh_frame, size 0x8f34 lma 4611c
=>  Loading section .ctors, size 0x8 lma 4f050
=>  Loading section .dtors, size 0x8 lma 4f058
=>  Loading section .got2, size 0x2c lma 4f060
=>  Loading section .rtemsroset, size 0xb54 lma 4f08c
=>  Loading section .data, size 0x1a90 lma 4fbe0
=>  Loading section .sdata, size 0x125 lma 51670
=>  Start address 4
=>  Transfer rate: 2669704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/ttest01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1377/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1367 W:0    | mipstx39/jmr3904: ttest02.exe
Result: invalid   
Time: 0:00:00.286161 ttest02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/ttest02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/ttest02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19ec4 lma 0
=>  Loading section .init, size 0x40 lma 19ec4
=>  Loading section .fini, size 0x20 lma 19f04
=>  Loading section .rodata, size 0x2c48 lma 19f28
=>  Loading section .eh_frame_hdr, size 0x1074 lma 1cb70
=>  Loading section .eh_frame, size 0x55c0 lma 1dbe4
=>  Loading section .ctors, size 0x8 lma 231a4
=>  Loading section .dtors, size 0x8 lma 231ac
=>  Loading section .got2, size 0x2c lma 231b4
=>  Loading section .rtemsroset, size 0x8c lma 231e0
=>  Loading section .data, size 0x4dc lma 23270
=>  Loading section .sdata, size 0xb1 lma 23750
=>  Start address 4
=>  Transfer rate: 1163176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/ttest02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1378/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1372 W:0    | mipstx39/jmr3904: tztest.exe
Result: invalid   
Time: 0:00:00.255219 tztest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/tztest.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/tztest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19460 lma 0
=>  Loading section .init, size 0x40 lma 19460
=>  Loading section .fini, size 0x20 lma 194a0
=>  Loading section .rodata, size 0x28ce lma 194c0
=>  Loading section .eh_frame_hdr, size 0xe64 lma 1bd90
=>  Loading section .eh_frame, size 0x4b60 lma 1cbf4
=>  Loading section .ctors, size 0x8 lma 21754
=>  Loading section .dtors, size 0x8 lma 2175c
=>  Loading section .got2, size 0x2c lma 21764
=>  Loading section .rtemsroset, size 0x70 lma 21790
=>  Loading section .data, size 0x554 lma 21800
=>  Loading section .sdata, size 0xd0 lma 21d58
=>  Start address 4
=>  Transfer rate: 1110288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/tztest.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1379/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1373 W:0    | mipstx39/jmr3904: uid01.exe
Result: invalid   
Time: 0:00:00.504929 uid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/uid01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/uid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20290 lma 0
=>  Loading section .init, size 0x40 lma 20290
=>  Loading section .fini, size 0x20 lma 202d0
=>  Loading section .rodata, size 0x2c8a lma 202f0
=>  Loading section .eh_frame_hdr, size 0x1184 lma 22f7c
=>  Loading section .eh_frame, size 0x603c lma 24100
=>  Loading section .ctors, size 0x8 lma 2a13c
=>  Loading section .dtors, size 0x8 lma 2a144
=>  Loading section .got2, size 0x2c lma 2a14c
=>  Loading section .rtemsroset, size 0x7c lma 2a178
=>  Loading section .data, size 0x580 lma 2a1f8
=>  Loading section .sdata, size 0xd5 lma 2a778
=>  Start address 4
=>  Transfer rate: 1393208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/uid01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1380/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1374 W:0    | mipstx39/jmr3904: utf8proc01.exe
Result: invalid   
Time: 0:00:00.575396 utf8proc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/utf8proc01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/utf8proc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15948 lma 0
=>  Loading section .init, size 0x40 lma 15948
=>  Loading section .fini, size 0x20 lma 15988
=>  Loading section .rodata, size 0x6d4d8 lma 159a8
=>  Loading section .eh_frame_hdr, size 0xd04 lma 82e80
=>  Loading section .eh_frame, size 0x448c lma 83b84
=>  Loading section .ctors, size 0x8 lma 88010
=>  Loading section .dtors, size 0x8 lma 88018
=>  Loading section .got2, size 0x2c lma 88020
=>  Loading section .rtemsroset, size 0x70 lma 8804c
=>  Loading section .data, size 0x368 lma 880c0
=>  Loading section .sdata, size 0xa9 lma 88428
=>  Start address 4
=>  Transfer rate: 4466280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/utf8proc01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1381/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1374 W:0    | mipstx39/jmr3904: psx01.exe
Result: invalid   
Time: 0:00:00.268291 psx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b25c lma 0
=>  Loading section .init, size 0x40 lma 1b25c
=>  Loading section .fini, size 0x20 lma 1b29c
=>  Loading section .rodata, size 0x2a1b lma 1b2c0
=>  Loading section .eh_frame_hdr, size 0xe4c lma 1dcdc
=>  Loading section .eh_frame, size 0x4c18 lma 1eb28
=>  Loading section .ctors, size 0x8 lma 23740
=>  Loading section .dtors, size 0x8 lma 23748
=>  Loading section .got2, size 0x2c lma 23750
=>  Loading section .rtemsroset, size 0x70 lma 2377c
=>  Loading section .data, size 0x4d0 lma 237f0
=>  Loading section .sdata, size 0xc5 lma 23cc0
=>  Start address 4
=>  Transfer rate: 1174496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1382/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1374 W:0    | mipstx39/jmr3904: psx02.exe
Result: invalid   
Time: 0:00:00.534221 psx02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1dec8 lma 0
=>  Loading section .init, size 0x40 lma 1dec8
=>  Loading section .fini, size 0x20 lma 1df08
=>  Loading section .rodata, size 0x2a08 lma 1df28
=>  Loading section .eh_frame_hdr, size 0x100c lma 20930
=>  Loading section .eh_frame, size 0x55b0 lma 2193c
=>  Loading section .ctors, size 0x8 lma 26eec
=>  Loading section .dtors, size 0x8 lma 26ef4
=>  Loading section .got2, size 0x2c lma 26efc
=>  Loading section .rtemsroset, size 0x74 lma 26f28
=>  Loading section .data, size 0x564 lma 26fa0
=>  Loading section .sdata, size 0xd8 lma 27508
=>  Start address 4
=>  Transfer rate: 1289920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1383/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1374 W:0    | mipstx39/jmr3904: psx03.exe
Result: invalid   
Time: 0:00:00.585731 psx03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e4a8 lma 0
=>  Loading section .init, size 0x40 lma 1e4a8
=>  Loading section .fini, size 0x20 lma 1e4e8
=>  Loading section .rodata, size 0x2b10 lma 1e508
=>  Loading section .eh_frame_hdr, size 0x1004 lma 21018
=>  Loading section .eh_frame, size 0x5584 lma 2201c
=>  Loading section .ctors, size 0x8 lma 275a0
=>  Loading section .dtors, size 0x8 lma 275a8
=>  Loading section .got2, size 0x2c lma 275b0
=>  Loading section .rtemsroset, size 0x74 lma 275dc
=>  Loading section .data, size 0x564 lma 27650
=>  Loading section .sdata, size 0xd8 lma 27bb8
=>  Start address 4
=>  Transfer rate: 1303648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1384/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1374 W:0    | mipstx39/jmr3904: psx04.exe
Result: invalid   
Time: 0:00:00.579574 psx04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e34c lma 0
=>  Loading section .init, size 0x40 lma 1e34c
=>  Loading section .fini, size 0x20 lma 1e38c
=>  Loading section .rodata, size 0x3c2a lma 1e3b0
=>  Loading section .eh_frame_hdr, size 0x1054 lma 21fdc
=>  Loading section .eh_frame, size 0x5570 lma 23030
=>  Loading section .ctors, size 0x8 lma 285a0
=>  Loading section .dtors, size 0x8 lma 285a8
=>  Loading section .got2, size 0x2c lma 285b0
=>  Loading section .rtemsroset, size 0x74 lma 285dc
=>  Loading section .data, size 0x590 lma 28650
=>  Loading section .sdata, size 0xdc lma 28be0
=>  Start address 4
=>  Transfer rate: 1336752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1385/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1377 W:0    | mipstx39/jmr3904: psx05.exe
Result: invalid   
Time: 0:00:00.255952 psx05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1fbfc lma 0
=>  Loading section .init, size 0x40 lma 1fbfc
=>  Loading section .fini, size 0x20 lma 1fc3c
=>  Loading section .rodata, size 0x38f6 lma 1fc60
=>  Loading section .eh_frame_hdr, size 0x1084 lma 23558
=>  Loading section .eh_frame, size 0x5a8c lma 245dc
=>  Loading section .ctors, size 0x8 lma 2a068
=>  Loading section .dtors, size 0x8 lma 2a070
=>  Loading section .got2, size 0x2c lma 2a078
=>  Loading section .rtemsroset, size 0x70 lma 2a0a4
=>  Loading section .data, size 0x560 lma 2a118
=>  Loading section .sdata, size 0xd4 lma 2a678
=>  Start address 4
=>  Transfer rate: 1391120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1386/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1377 W:0    | mipstx39/jmr3904: psx06.exe
Result: invalid   
Time: 0:00:00.313477 psx06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b0e0 lma 0
=>  Loading section .init, size 0x40 lma 1b0e0
=>  Loading section .fini, size 0x20 lma 1b120
=>  Loading section .rodata, size 0x27fe lma 1b140
=>  Loading section .eh_frame_hdr, size 0xf84 lma 1d940
=>  Loading section .eh_frame, size 0x50fc lma 1e8c4
=>  Loading section .ctors, size 0x8 lma 239c0
=>  Loading section .dtors, size 0x8 lma 239c8
=>  Loading section .got2, size 0x2c lma 239d0
=>  Loading section .rtemsroset, size 0x74 lma 239fc
=>  Loading section .data, size 0x5c8 lma 23a70
=>  Loading section .sdata, size 0xdc lma 24038
=>  Start address 4
=>  Transfer rate: 1181840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1387/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1377 W:0    | mipstx39/jmr3904: psx07.exe
Result: invalid   
Time: 0:00:00.254794 psx07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20cd0 lma 0
=>  Loading section .init, size 0x40 lma 20cd0
=>  Loading section .fini, size 0x20 lma 20d10
=>  Loading section .rodata, size 0x4ee6 lma 20d30
=>  Loading section .eh_frame_hdr, size 0x1014 lma 25c18
=>  Loading section .eh_frame, size 0x63f0 lma 26c2c
=>  Loading section .ctors, size 0x8 lma 2d01c
=>  Loading section .dtors, size 0x8 lma 2d024
=>  Loading section .got2, size 0x2c lma 2d02c
=>  Loading section .rtemsroset, size 0x70 lma 2d058
=>  Loading section .data, size 0x560 lma 2d0c8
=>  Loading section .sdata, size 0xd4 lma 2d628
=>  Start address 4
=>  Transfer rate: 1488848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1388/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1379 W:0    | mipstx39/jmr3904: psx08.exe
Result: invalid   
Time: 0:00:00.253409 psx08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b7a0 lma 0
=>  Loading section .init, size 0x40 lma 1b7a0
=>  Loading section .fini, size 0x20 lma 1b7e0
=>  Loading section .rodata, size 0x295e lma 1b800
=>  Loading section .eh_frame_hdr, size 0xfbc lma 1e160
=>  Loading section .eh_frame, size 0x5224 lma 1f11c
=>  Loading section .ctors, size 0x8 lma 24340
=>  Loading section .dtors, size 0x8 lma 24348
=>  Loading section .got2, size 0x2c lma 24350
=>  Loading section .rtemsroset, size 0x70 lma 2437c
=>  Loading section .data, size 0x560 lma 243f0
=>  Loading section .sdata, size 0xd4 lma 24950
=>  Start address 4
=>  Transfer rate: 1200368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1389/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1381 W:0    | mipstx39/jmr3904: psx09.exe
Result: invalid   
Time: 0:00:00.255784 psx09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx09.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x23dcc lma 0
=>  Loading section .init, size 0x40 lma 23dcc
=>  Loading section .fini, size 0x20 lma 23e0c
=>  Loading section .rodata, size 0x36bf lma 23e30
=>  Loading section .eh_frame_hdr, size 0x10a4 lma 274f0
=>  Loading section .eh_frame, size 0x5ca0 lma 28594
=>  Loading section .ctors, size 0x8 lma 2e234
=>  Loading section .dtors, size 0x8 lma 2e23c
=>  Loading section .got2, size 0x2c lma 2e244
=>  Loading section .rtemsroset, size 0x70 lma 2e270
=>  Loading section .data, size 0x554 lma 2e2e0
=>  Loading section .sdata, size 0xd4 lma 2e838
=>  Start address 4
=>  Transfer rate: 1525784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx09.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1390/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1381 W:0    | mipstx39/jmr3904: psx10.exe
Result: invalid   
Time: 0:00:00.266502 psx10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx10.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18320 lma 0
=>  Loading section .init, size 0x40 lma 18320
=>  Loading section .fini, size 0x20 lma 18360
=>  Loading section .rodata, size 0x29f2 lma 18380
=>  Loading section .eh_frame_hdr, size 0xe94 lma 1ad74
=>  Loading section .eh_frame, size 0x4e3c lma 1bc08
=>  Loading section .ctors, size 0x8 lma 20a44
=>  Loading section .dtors, size 0x8 lma 20a4c
=>  Loading section .got2, size 0x2c lma 20a54
=>  Loading section .rtemsroset, size 0x70 lma 20a80
=>  Loading section .data, size 0x370 lma 20af0
=>  Loading section .sdata, size 0xc5 lma 20e60
=>  Start address 4
=>  Transfer rate: 1079576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx10.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1391/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1381 W:0    | mipstx39/jmr3904: psx11.exe
Result: invalid   
Time: 0:00:00.264498 psx11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx11.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a9a8 lma 0
=>  Loading section .init, size 0x40 lma 1a9a8
=>  Loading section .fini, size 0x20 lma 1a9e8
=>  Loading section .rodata, size 0x26d2 lma 1aa08
=>  Loading section .eh_frame_hdr, size 0xf0c lma 1d0dc
=>  Loading section .eh_frame, size 0x4f34 lma 1dfe8
=>  Loading section .ctors, size 0x8 lma 22f1c
=>  Loading section .dtors, size 0x8 lma 22f24
=>  Loading section .got2, size 0x2c lma 22f2c
=>  Loading section .rtemsroset, size 0x70 lma 22f58
=>  Loading section .data, size 0x554 lma 22fc8
=>  Loading section .sdata, size 0xd4 lma 23520
=>  Start address 4
=>  Transfer rate: 1159024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx11.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1392/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1387 W:0    | mipstx39/jmr3904: psx12.exe
Result: invalid   
Time: 0:00:00.252295 psx12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b13c lma 0
=>  Loading section .init, size 0x40 lma 1b13c
=>  Loading section .fini, size 0x20 lma 1b17c
=>  Loading section .rodata, size 0x26ee lma 1b1a0
=>  Loading section .eh_frame_hdr, size 0xf74 lma 1d890
=>  Loading section .eh_frame, size 0x5164 lma 1e804
=>  Loading section .ctors, size 0x8 lma 23968
=>  Loading section .dtors, size 0x8 lma 23970
=>  Loading section .got2, size 0x2c lma 23978
=>  Loading section .rtemsroset, size 0x70 lma 239a4
=>  Loading section .data, size 0x560 lma 23a18
=>  Loading section .sdata, size 0xd4 lma 23f78
=>  Start address 4
=>  Transfer rate: 1180176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1393/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1387 W:0    | mipstx39/jmr3904: psx13.exe
Result: invalid   
Time: 0:00:00.501467 psx13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx13.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bc84 lma 0
=>  Loading section .init, size 0x40 lma 1bc84
=>  Loading section .fini, size 0x20 lma 1bcc4
=>  Loading section .rodata, size 0x221c lma 1bce8
=>  Loading section .eh_frame_hdr, size 0xecc lma 1df04
=>  Loading section .eh_frame, size 0x53d8 lma 1edd0
=>  Loading section .tdata, size 0xc lma 241a8
=>  Loading section .ctors, size 0x8 lma 241b4
=>  Loading section .dtors, size 0x8 lma 241bc
=>  Loading section .got2, size 0x2c lma 241c4
=>  Loading section .rtemsroset, size 0x70 lma 241f0
=>  Loading section .data, size 0x370 lma 24260
=>  Loading section .sdata, size 0xad lma 245d0
=>  Start address 4
=>  Transfer rate: 1192904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx13.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1394/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1389 W:0    | mipstx39/jmr3904: psx14.exe
Result: invalid   
Time: 0:00:00.279697 psx14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx14.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15060 lma 0
=>  Loading section .init, size 0x40 lma 15060
=>  Loading section .fini, size 0x20 lma 150a0
=>  Loading section .rodata, size 0x2724 lma 150c0
=>  Loading section .eh_frame_hdr, size 0xda4 lma 177e4
=>  Loading section .eh_frame, size 0x4608 lma 18588
=>  Loading section .ctors, size 0x8 lma 1cb90
=>  Loading section .dtors, size 0x8 lma 1cb98
=>  Loading section .got2, size 0x2c lma 1cba0
=>  Loading section .rtemsroset, size 0x70 lma 1cbcc
=>  Loading section .data, size 0x364 lma 1cc40
=>  Loading section .sdata, size 0xc5 lma 1cfa8
=>  Start address 4
=>  Transfer rate: 951080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx14.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1395/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1389 W:0    | mipstx39/jmr3904: psx15.exe
Result: invalid   
Time: 0:00:00.258568 psx15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx15.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14008 lma 0
=>  Loading section .init, size 0x40 lma 14008
=>  Loading section .fini, size 0x20 lma 14048
=>  Loading section .rodata, size 0x1fc0 lma 14068
=>  Loading section .eh_frame_hdr, size 0xc9c lma 16028
=>  Loading section .eh_frame, size 0x41b4 lma 16cc4
=>  Loading section .ctors, size 0x8 lma 1ae78
=>  Loading section .dtors, size 0x8 lma 1ae80
=>  Loading section .got2, size 0x2c lma 1ae88
=>  Loading section .rtemsroset, size 0x70 lma 1aeb4
=>  Loading section .data, size 0x368 lma 1af28
=>  Loading section .sdata, size 0xb1 lma 1b290
=>  Start address 4
=>  Transfer rate: 891368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx15.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1396/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1389 W:0    | mipstx39/jmr3904: psx16.exe
Result: invalid   
Time: 0:00:00.516250 psx16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx16.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15500 lma 0
=>  Loading section .init, size 0x40 lma 15500
=>  Loading section .fini, size 0x20 lma 15540
=>  Loading section .rodata, size 0x20ba lma 15560
=>  Loading section .eh_frame_hdr, size 0xdb4 lma 1761c
=>  Loading section .eh_frame, size 0x4670 lma 183d0
=>  Loading section .ctors, size 0x8 lma 1ca40
=>  Loading section .dtors, size 0x8 lma 1ca48
=>  Loading section .got2, size 0x2c lma 1ca50
=>  Loading section .rtemsroset, size 0x70 lma 1ca7c
=>  Loading section .data, size 0x370 lma 1caf0
=>  Loading section .sdata, size 0xc5 lma 1ce60
=>  Start address 4
=>  Transfer rate: 948472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx16.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1397/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1389 W:0    | mipstx39/jmr3904: psxaio01.exe
Result: invalid   
Time: 0:00:00.270500 psxaio01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxaio01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxaio01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x189ec lma 0
=>  Loading section .init, size 0x40 lma 189ec
=>  Loading section .fini, size 0x20 lma 18a2c
=>  Loading section .rodata, size 0x2268 lma 18a50
=>  Loading section .eh_frame_hdr, size 0xf3c lma 1acb8
=>  Loading section .eh_frame, size 0x5160 lma 1bbf4
=>  Loading section .ctors, size 0x8 lma 20d54
=>  Loading section .dtors, size 0x8 lma 20d5c
=>  Loading section .got2, size 0x2c lma 20d64
=>  Loading section .rtemsroset, size 0x70 lma 20d90
=>  Loading section .data, size 0x364 lma 20e00
=>  Loading section .sdata, size 0xc1 lma 21168
=>  Start address 4
=>  Transfer rate: 1085704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxaio01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1398/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1389 W:0    | mipstx39/jmr3904: psxaio02.exe
Result: invalid   
Time: 0:00:00.293094 psxaio02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxaio02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxaio02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e9fc lma 0
=>  Loading section .init, size 0x40 lma 1e9fc
=>  Loading section .fini, size 0x20 lma 1ea3c
=>  Loading section .rodata, size 0x2a3b lma 1ea60
=>  Loading section .eh_frame_hdr, size 0x101c lma 2149c
=>  Loading section .eh_frame, size 0x5914 lma 224b8
=>  Loading section .ctors, size 0x8 lma 27dcc
=>  Loading section .dtors, size 0x8 lma 27dd4
=>  Loading section .got2, size 0x2c lma 27ddc
=>  Loading section .rtemsroset, size 0x70 lma 27e08
=>  Loading section .data, size 0x4d0 lma 27e78
=>  Loading section .sdata, size 0xc1 lma 28348
=>  Start address 4
=>  Transfer rate: 1318944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxaio02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1399/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1389 W:0    | mipstx39/jmr3904: psxaio03.exe
Result: invalid   
Time: 0:00:00.251202 psxaio03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxaio03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxaio03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e594 lma 0
=>  Loading section .init, size 0x40 lma 1e594
=>  Loading section .fini, size 0x20 lma 1e5d4
=>  Loading section .rodata, size 0x2806 lma 1e5f8
=>  Loading section .eh_frame_hdr, size 0x1024 lma 20e00
=>  Loading section .eh_frame, size 0x58b8 lma 21e24
=>  Loading section .ctors, size 0x8 lma 276dc
=>  Loading section .dtors, size 0x8 lma 276e4
=>  Loading section .got2, size 0x2c lma 276ec
=>  Loading section .rtemsroset, size 0x70 lma 27718
=>  Loading section .data, size 0x4dc lma 27788
=>  Loading section .sdata, size 0xc1 lma 27c68
=>  Start address 4
=>  Transfer rate: 1304824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxaio03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1400/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1393 W:0    | mipstx39/jmr3904: psxalarm01.exe
Result: invalid   
Time: 0:00:00.288271 psxalarm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxalarm01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxalarm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16c98 lma 0
=>  Loading section .init, size 0x40 lma 16c98
=>  Loading section .fini, size 0x20 lma 16cd8
=>  Loading section .rodata, size 0x2296 lma 16cf8
=>  Loading section .eh_frame_hdr, size 0xe64 lma 18f90
=>  Loading section .eh_frame, size 0x4ad0 lma 19df4
=>  Loading section .ctors, size 0x8 lma 1e8c4
=>  Loading section .dtors, size 0x8 lma 1e8cc
=>  Loading section .got2, size 0x2c lma 1e8d4
=>  Loading section .rtemsroset, size 0x78 lma 1e900
=>  Loading section .data, size 0x3a4 lma 1e978
=>  Loading section .sdata, size 0xd1 lma 1ed20
=>  Start address 4
=>  Transfer rate: 1011544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxalarm01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1401/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1394 W:0    | mipstx39/jmr3904: psxautoinit01.exe
Result: invalid   
Time: 0:00:00.260133 psxautoinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxautoinit01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxautoinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14f0c lma 0
=>  Loading section .init, size 0x40 lma 14f0c
=>  Loading section .fini, size 0x20 lma 14f4c
=>  Loading section .rodata, size 0x2ab8 lma 14f70
=>  Loading section .eh_frame_hdr, size 0xd34 lma 17a28
=>  Loading section .eh_frame, size 0x44a4 lma 1875c
=>  Loading section .ctors, size 0x8 lma 1cc00
=>  Loading section .dtors, size 0x8 lma 1cc08
=>  Loading section .got2, size 0x2c lma 1cc10
=>  Loading section .rtemsroset, size 0x6c lma 1cc3c
=>  Loading section .data, size 0x348 lma 1cca8
=>  Loading section .sdata, size 0xa9 lma 1cff0
=>  Start address 4
=>  Transfer rate: 951464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxautoinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1402/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1394 W:0    | mipstx39/jmr3904: psxautoinit02.exe
Result: invalid   
Time: 0:00:00.260003 psxautoinit02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxautoinit02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxautoinit02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16edc lma 0
=>  Loading section .init, size 0x40 lma 16edc
=>  Loading section .fini, size 0x20 lma 16f1c
=>  Loading section .rodata, size 0x2c70 lma 16f40
=>  Loading section .eh_frame_hdr, size 0xe44 lma 19bb0
=>  Loading section .eh_frame, size 0x4a94 lma 1a9f4
=>  Loading section .ctors, size 0x8 lma 1f488
=>  Loading section .dtors, size 0x8 lma 1f490
=>  Loading section .got2, size 0x2c lma 1f498
=>  Loading section .rtemsroset, size 0x70 lma 1f4c4
=>  Loading section .data, size 0x364 lma 1f538
=>  Loading section .sdata, size 0xbd lma 1f8a0
=>  Start address 4
=>  Transfer rate: 1034888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxautoinit02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1403/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1394 W:0    | mipstx39/jmr3904: psxbarrier01.exe
Result: invalid   
Time: 0:00:00.295448 psxbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxbarrier01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x167f8 lma 0
=>  Loading section .init, size 0x40 lma 167f8
=>  Loading section .fini, size 0x20 lma 16838
=>  Loading section .rodata, size 0x2732 lma 16858
=>  Loading section .eh_frame_hdr, size 0xe0c lma 18f8c
=>  Loading section .eh_frame, size 0x4898 lma 19d98
=>  Loading section .ctors, size 0x8 lma 1e630
=>  Loading section .dtors, size 0x8 lma 1e638
=>  Loading section .got2, size 0x2c lma 1e640
=>  Loading section .rtemsroset, size 0x74 lma 1e66c
=>  Loading section .data, size 0x3e8 lma 1e6e0
=>  Loading section .sdata, size 0xb5 lma 1eac8
=>  Start address 4
=>  Transfer rate: 1006552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1404/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1395 W:0    | mipstx39/jmr3904: psxcancel.exe
Result: invalid   
Time: 0:00:00.256013 psxcancel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxcancel.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxcancel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x192e4 lma 0
=>  Loading section .init, size 0x40 lma 192e4
=>  Loading section .fini, size 0x20 lma 19324
=>  Loading section .rodata, size 0x2e96 lma 19348
=>  Loading section .eh_frame_hdr, size 0xfdc lma 1c1e0
=>  Loading section .eh_frame, size 0x51a8 lma 1d1bc
=>  Loading section .tdata, size 0xc lma 22364
=>  Loading section .ctors, size 0x8 lma 22370
=>  Loading section .dtors, size 0x8 lma 22378
=>  Loading section .got2, size 0x2c lma 22380
=>  Loading section .rtemsroset, size 0x74 lma 223ac
=>  Loading section .data, size 0x3e4 lma 22420
=>  Loading section .sdata, size 0xbd lma 22808
=>  Start address 4
=>  Transfer rate: 1131992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcancel.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1405/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1395 W:0    | mipstx39/jmr3904: psxcancel01.exe
Result: invalid   
Time: 0:00:00.542263 psxcancel01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxcancel01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxcancel01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x158bc lma 0
=>  Loading section .init, size 0x40 lma 158bc
=>  Loading section .fini, size 0x20 lma 158fc
=>  Loading section .rodata, size 0x2a18 lma 15920
=>  Loading section .eh_frame_hdr, size 0xde4 lma 18338
=>  Loading section .eh_frame, size 0x47a4 lma 1911c
=>  Loading section .ctors, size 0x8 lma 1d8c0
=>  Loading section .dtors, size 0x8 lma 1d8c8
=>  Loading section .got2, size 0x2c lma 1d8d0
=>  Loading section .rtemsroset, size 0x74 lma 1d8fc
=>  Loading section .data, size 0x394 lma 1d970
=>  Loading section .sdata, size 0xbd lma 1dd08
=>  Start address 4
=>  Transfer rate: 978408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcancel01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1406/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1401 W:0    | mipstx39/jmr3904: psxchroot01.exe
Result: invalid   
Time: 0:00:00.251902 psxchroot01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxchroot01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxchroot01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x139b8 lma 0
=>  Loading section .init, size 0x40 lma 139b8
=>  Loading section .fini, size 0x20 lma 139f8
=>  Loading section .rodata, size 0x2098 lma 13a18
=>  Loading section .eh_frame_hdr, size 0xc64 lma 15ab0
=>  Loading section .eh_frame, size 0x40f4 lma 16714
=>  Loading section .ctors, size 0x8 lma 1a808
=>  Loading section .dtors, size 0x8 lma 1a810
=>  Loading section .got2, size 0x2c lma 1a818
=>  Loading section .rtemsroset, size 0x70 lma 1a844
=>  Loading section .data, size 0x384 lma 1a8b8
=>  Loading section .sdata, size 0x95 lma 1ac3c
=>  Start address 4
=>  Transfer rate: 878184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxchroot01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1407/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1402 W:0    | mipstx39/jmr3904: psxclassic01.exe
Result: invalid   
Time: 0:00:00.264324 psxclassic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxclassic01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxclassic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17624 lma 0
=>  Loading section .init, size 0x40 lma 17624
=>  Loading section .fini, size 0x20 lma 17664
=>  Loading section .rodata, size 0x2412 lma 17688
=>  Loading section .eh_frame_hdr, size 0xeec lma 19a9c
=>  Loading section .eh_frame, size 0x4cec lma 1a988
=>  Loading section .ctors, size 0x8 lma 1f674
=>  Loading section .dtors, size 0x8 lma 1f67c
=>  Loading section .got2, size 0x2c lma 1f684
=>  Loading section .rtemsroset, size 0x78 lma 1f6b0
=>  Loading section .data, size 0x3f8 lma 1f728
=>  Loading section .sdata, size 0xbc lma 1fb20
=>  Start address 4
=>  Transfer rate: 1040048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxclassic01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1408/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1402 W:0    | mipstx39/jmr3904: psxcleanup.exe
Result: invalid   
Time: 0:00:00.311735 psxcleanup.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxcleanup.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxcleanup.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18304 lma 0
=>  Loading section .init, size 0x40 lma 18304
=>  Loading section .fini, size 0x20 lma 18344
=>  Loading section .rodata, size 0x2c42 lma 18368
=>  Loading section .eh_frame_hdr, size 0xfa4 lma 1afac
=>  Loading section .eh_frame, size 0x51a0 lma 1bf50
=>  Loading section .tdata, size 0xc lma 210f0
=>  Loading section .ctors, size 0x8 lma 210fc
=>  Loading section .dtors, size 0x8 lma 21104
=>  Loading section .got2, size 0x2c lma 2110c
=>  Loading section .rtemsroset, size 0x74 lma 21138
=>  Loading section .data, size 0x3b4 lma 211b0
=>  Loading section .sdata, size 0xbd lma 21568
=>  Start address 4
=>  Transfer rate: 1093816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcleanup.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1409/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1402 W:0    | mipstx39/jmr3904: psxcleanup01.exe
Result: invalid   
Time: 0:00:00.559240 psxcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxcleanup01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14cb8 lma 0
=>  Loading section .init, size 0x40 lma 14cb8
=>  Loading section .fini, size 0x20 lma 14cf8
=>  Loading section .rodata, size 0x204c lma 14d18
=>  Loading section .eh_frame_hdr, size 0xd74 lma 16d64
=>  Loading section .eh_frame, size 0x4618 lma 17ad8
=>  Loading section .ctors, size 0x8 lma 1c0f0
=>  Loading section .dtors, size 0x8 lma 1c0f8
=>  Loading section .got2, size 0x2c lma 1c100
=>  Loading section .rtemsroset, size 0x74 lma 1c12c
=>  Loading section .data, size 0x3fc lma 1c1a0
=>  Loading section .sdata, size 0xa9 lma 1c59c
=>  Start address 4
=>  Transfer rate: 930344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1410/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1402 W:0    | mipstx39/jmr3904: psxcleanup02.exe
Result: invalid   
Time: 0:00:00.268534 psxcleanup02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxcleanup02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxcleanup02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1433c lma 0
=>  Loading section .init, size 0x40 lma 1433c
=>  Loading section .fini, size 0x20 lma 1437c
=>  Loading section .rodata, size 0x1fbb lma 143a0
=>  Loading section .eh_frame_hdr, size 0xd3c lma 1635c
=>  Loading section .eh_frame, size 0x43fc lma 17098
=>  Loading section .ctors, size 0x8 lma 1b494
=>  Loading section .dtors, size 0x8 lma 1b49c
=>  Loading section .got2, size 0x2c lma 1b4a4
=>  Loading section .rtemsroset, size 0x74 lma 1b4d0
=>  Loading section .data, size 0x3e8 lma 1b548
=>  Loading section .sdata, size 0xcd lma 1b930
=>  Start address 4
=>  Transfer rate: 905120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcleanup02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1411/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1402 W:0    | mipstx39/jmr3904: psxclock.exe
Result: invalid   
Time: 0:00:00.267798 psxclock.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxclock.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxclock.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1dc30 lma 0
=>  Loading section .init, size 0x40 lma 1dc30
=>  Loading section .fini, size 0x20 lma 1dc70
=>  Loading section .rodata, size 0x2dae lma 1dc90
=>  Loading section .eh_frame_hdr, size 0xf74 lma 20a40
=>  Loading section .eh_frame, size 0x533c lma 219b4
=>  Loading section .ctors, size 0x8 lma 26cf0
=>  Loading section .dtors, size 0x8 lma 26cf8
=>  Loading section .got2, size 0x2c lma 26d00
=>  Loading section .rtemsroset, size 0x70 lma 26d2c
=>  Loading section .data, size 0x564 lma 26da0
=>  Loading section .sdata, size 0xb8 lma 27308
=>  Start address 4
=>  Transfer rate: 1285552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxclock.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1412/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1402 W:0    | mipstx39/jmr3904: psxclock01.exe
Result: invalid   
Time: 0:00:00.297627 psxclock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxclock01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxclock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x148e8 lma 0
=>  Loading section .init, size 0x40 lma 148e8
=>  Loading section .fini, size 0x20 lma 14928
=>  Loading section .rodata, size 0x1fb8 lma 14948
=>  Loading section .eh_frame_hdr, size 0xd14 lma 16900
=>  Loading section .eh_frame, size 0x4398 lma 17614
=>  Loading section .ctors, size 0x8 lma 1b9ac
=>  Loading section .dtors, size 0x8 lma 1b9b4
=>  Loading section .got2, size 0x2c lma 1b9bc
=>  Loading section .rtemsroset, size 0x70 lma 1b9e8
=>  Loading section .data, size 0x368 lma 1ba58
=>  Loading section .sdata, size 0xbd lma 1bdc0
=>  Start address 4
=>  Transfer rate: 914408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxclock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1413/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1403 W:0    | mipstx39/jmr3904: psxclockrealtime01.exe
Result: invalid   
Time: 0:00:00.266412 psxclockrealtime01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxclockrealtime01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxclockrealtime01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a4e4 lma 0
=>  Loading section .init, size 0x40 lma 1a4e4
=>  Loading section .fini, size 0x20 lma 1a524
=>  Loading section .rodata, size 0x2c5c lma 1a548
=>  Loading section .eh_frame_hdr, size 0x107c lma 1d1a4
=>  Loading section .eh_frame, size 0x57c0 lma 1e220
=>  Loading section .ctors, size 0x8 lma 239e0
=>  Loading section .dtors, size 0x8 lma 239e8
=>  Loading section .got2, size 0x2c lma 239f0
=>  Loading section .rtemsroset, size 0x74 lma 23a1c
=>  Loading section .data, size 0x3c8 lma 23a90
=>  Loading section .sdata, size 0xc1 lma 23e58
=>  Start address 4
=>  Transfer rate: 1177768 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxclockrealtime01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1414/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1409 W:0    | mipstx39/jmr3904: psxconcurrency01.exe
Result: invalid   
Time: 0:00:00.258896 psxconcurrency01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxconcurrency01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxconcurrency01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x139b8 lma 0
=>  Loading section .init, size 0x40 lma 139b8
=>  Loading section .fini, size 0x20 lma 139f8
=>  Loading section .rodata, size 0x1ffc lma 13a18
=>  Loading section .eh_frame_hdr, size 0xc9c lma 15a14
=>  Loading section .eh_frame, size 0x40fc lma 166b0
=>  Loading section .ctors, size 0x8 lma 1a7ac
=>  Loading section .dtors, size 0x8 lma 1a7b4
=>  Loading section .got2, size 0x2c lma 1a7bc
=>  Loading section .rtemsroset, size 0x6c lma 1a7e8
=>  Loading section .data, size 0x34c lma 1a858
=>  Loading section .sdata, size 0xa9 lma 1aba4
=>  Start address 4
=>  Transfer rate: 877128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxconcurrency01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1415/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1410 W:0    | mipstx39/jmr3904: psxcond01.exe
Result: invalid   
Time: 0:00:00.274977 psxcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxcond01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17154 lma 0
=>  Loading section .init, size 0x40 lma 17154
=>  Loading section .fini, size 0x20 lma 17194
=>  Loading section .rodata, size 0x2cbe lma 171b8
=>  Loading section .eh_frame_hdr, size 0xe74 lma 19e78
=>  Loading section .eh_frame, size 0x4b90 lma 1acec
=>  Loading section .ctors, size 0x8 lma 1f87c
=>  Loading section .dtors, size 0x8 lma 1f884
=>  Loading section .got2, size 0x2c lma 1f88c
=>  Loading section .rtemsroset, size 0x70 lma 1f8b8
=>  Loading section .data, size 0x370 lma 1f928
=>  Loading section .sdata, size 0xbd lma 1fc98
=>  Start address 4
=>  Transfer rate: 1043064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1416/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1410 W:0    | mipstx39/jmr3904: psxcond02.exe
Result: invalid   
Time: 0:00:00.513461 psxcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxcond02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x145cc lma 0
=>  Loading section .init, size 0x40 lma 145cc
=>  Loading section .fini, size 0x20 lma 1460c
=>  Loading section .rodata, size 0x2b70 lma 14630
=>  Loading section .eh_frame_hdr, size 0xccc lma 171a0
=>  Loading section .eh_frame, size 0x41b4 lma 17e6c
=>  Loading section .ctors, size 0x8 lma 1c020
=>  Loading section .dtors, size 0x8 lma 1c028
=>  Loading section .got2, size 0x2c lma 1c030
=>  Loading section .rtemsroset, size 0x6c lma 1c05c
=>  Loading section .data, size 0x348 lma 1c0c8
=>  Loading section .sdata, size 0xa9 lma 1c410
=>  Start address 4
=>  Transfer rate: 927144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1417/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1410 W:0    | mipstx39/jmr3904: psxconfig01.exe
Result: invalid   
Time: 0:00:00.255672 psxconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxconfig01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19734 lma 0
=>  Loading section .init, size 0x40 lma 19734
=>  Loading section .fini, size 0x20 lma 19774
=>  Loading section .rodata, size 0x2cf4 lma 19798
=>  Loading section .eh_frame_hdr, size 0x100c lma 1c48c
=>  Loading section .eh_frame, size 0x55b8 lma 1d498
=>  Loading section .ctors, size 0x8 lma 22a50
=>  Loading section .dtors, size 0x8 lma 22a58
=>  Loading section .got2, size 0x2c lma 22a60
=>  Loading section .rtemsroset, size 0xa8 lma 22a8c
=>  Loading section .data, size 0x654 lma 22b38
=>  Loading section .sdata, size 0xe1 lma 23190
=>  Start address 4
=>  Transfer rate: 1151784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1418/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1411 W:0    | mipstx39/jmr3904: psxconfstr.exe
Result: invalid   
Time: 0:00:00.274611 psxconfstr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxconfstr.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxconfstr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b118 lma 0
=>  Loading section .init, size 0x40 lma 1b118
=>  Loading section .fini, size 0x20 lma 1b158
=>  Loading section .rodata, size 0x2a41 lma 1b178
=>  Loading section .eh_frame_hdr, size 0x104c lma 1dbbc
=>  Loading section .eh_frame, size 0x585c lma 1ec08
=>  Loading section .ctors, size 0x8 lma 24464
=>  Loading section .dtors, size 0x8 lma 2446c
=>  Loading section .got2, size 0x2c lma 24474
=>  Loading section .rtemsroset, size 0x78 lma 244a0
=>  Loading section .data, size 0x378 lma 24518
=>  Loading section .sdata, size 0xa1 lma 24890
=>  Start address 4
=>  Transfer rate: 1198448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxconfstr.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1419/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1411 W:0    | mipstx39/jmr3904: psxdevctl01.exe
Result: invalid   
Time: 0:00:00.305818 psxdevctl01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxdevctl01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxdevctl01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17580 lma 0
=>  Loading section .init, size 0x40 lma 17580
=>  Loading section .fini, size 0x20 lma 175c0
=>  Loading section .rodata, size 0x22f9 lma 175e0
=>  Loading section .eh_frame_hdr, size 0xe0c lma 198dc
=>  Loading section .eh_frame, size 0x4c44 lma 1a6e8
=>  Loading section .ctors, size 0x8 lma 1f32c
=>  Loading section .dtors, size 0x8 lma 1f334
=>  Loading section .got2, size 0x2c lma 1f33c
=>  Loading section .rtemsroset, size 0x6c lma 1f368
=>  Loading section .data, size 0x334 lma 1f3d8
=>  Loading section .sdata, size 0xa1 lma 1f70c
=>  Start address 4
=>  Transfer rate: 1031472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxdevctl01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1420/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1411 W:0    | mipstx39/jmr3904: psxeintr_join.exe
Result: invalid   
Time: 0:00:00.255519 psxeintr_join.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxeintr_join.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxeintr_join.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x160b4 lma 0
=>  Loading section .init, size 0x40 lma 160b4
=>  Loading section .fini, size 0x20 lma 160f4
=>  Loading section .rodata, size 0x2244 lma 16118
=>  Loading section .eh_frame_hdr, size 0xe34 lma 1835c
=>  Loading section .eh_frame, size 0x4914 lma 19190
=>  Loading section .ctors, size 0x8 lma 1daa4
=>  Loading section .dtors, size 0x8 lma 1daac
=>  Loading section .got2, size 0x2c lma 1dab4
=>  Loading section .rtemsroset, size 0x74 lma 1dae0
=>  Loading section .data, size 0x364 lma 1db58
=>  Loading section .sdata, size 0xc1 lma 1dec0
=>  Start address 4
=>  Transfer rate: 981928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxeintr_join.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1421/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1415 W:0    | mipstx39/jmr3904: psxenosys.exe
Result: invalid   
Time: 0:00:00.561487 psxenosys.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxenosys.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxenosys.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x158f4 lma 0
=>  Loading section .init, size 0x40 lma 158f4
=>  Loading section .fini, size 0x20 lma 15934
=>  Loading section .rodata, size 0x2c55 lma 15958
=>  Loading section .eh_frame_hdr, size 0xe24 lma 185b0
=>  Loading section .eh_frame, size 0x4724 lma 193d4
=>  Loading section .ctors, size 0x8 lma 1daf8
=>  Loading section .dtors, size 0x8 lma 1db00
=>  Loading section .got2, size 0x2c lma 1db08
=>  Loading section .rtemsroset, size 0x70 lma 1db34
=>  Loading section .data, size 0x364 lma 1dba8
=>  Loading section .sdata, size 0xc4 lma 1df10
=>  Start address 4
=>  Transfer rate: 982568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxenosys.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1422/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1415 W:0    | mipstx39/jmr3904: psxfatal01.exe
Result: invalid   
Time: 0:00:00.312695 psxfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxfatal01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14cdc lma 0
=>  Loading section .init, size 0x40 lma 14cdc
=>  Loading section .fini, size 0x20 lma 14d1c
=>  Loading section .rodata, size 0x2d1c lma 14d40
=>  Loading section .eh_frame_hdr, size 0xd0c lma 17a5c
=>  Loading section .eh_frame, size 0x43c0 lma 18768
=>  Loading section .ctors, size 0x8 lma 1cb28
=>  Loading section .dtors, size 0x8 lma 1cb30
=>  Loading section .got2, size 0x2c lma 1cb38
=>  Loading section .rtemsroset, size 0x70 lma 1cb64
=>  Loading section .data, size 0x368 lma 1cbd8
=>  Loading section .sdata, size 0xbd lma 1cf40
=>  Start address 4
=>  Transfer rate: 950184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1423/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1415 W:0    | mipstx39/jmr3904: psxfatal02.exe
Result: invalid   
Time: 0:00:00.563763 psxfatal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxfatal02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxfatal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c78 lma 0
=>  Loading section .init, size 0x40 lma 14c78
=>  Loading section .fini, size 0x20 lma 14cb8
=>  Loading section .rodata, size 0x2d44 lma 14cd8
=>  Loading section .eh_frame_hdr, size 0xd1c lma 17a1c
=>  Loading section .eh_frame, size 0x43cc lma 18738
=>  Loading section .ctors, size 0x8 lma 1cb04
=>  Loading section .dtors, size 0x8 lma 1cb0c
=>  Loading section .got2, size 0x2c lma 1cb14
=>  Loading section .rtemsroset, size 0x6c lma 1cb40
=>  Loading section .data, size 0x368 lma 1cbb0
=>  Loading section .sdata, size 0xc1 lma 1cf18
=>  Start address 4
=>  Transfer rate: 949928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfatal02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1424/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1415 W:0    | mipstx39/jmr3904: psxfchx01.exe
Result: invalid   
Time: 0:00:00.537412 psxfchx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxfchx01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxfchx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15528 lma 0
=>  Loading section .init, size 0x40 lma 15528
=>  Loading section .fini, size 0x20 lma 15568
=>  Loading section .rodata, size 0x255c lma 15588
=>  Loading section .eh_frame_hdr, size 0xccc lma 17ae4
=>  Loading section .eh_frame, size 0x4438 lma 187b0
=>  Loading section .ctors, size 0x8 lma 1cbe8
=>  Loading section .dtors, size 0x8 lma 1cbf0
=>  Loading section .got2, size 0x2c lma 1cbf8
=>  Loading section .rtemsroset, size 0x70 lma 1cc24
=>  Loading section .data, size 0x364 lma 1cc98
=>  Loading section .sdata, size 0xa5 lma 1d000
=>  Start address 4
=>  Transfer rate: 951528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfchx01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1425/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1418 W:0    | mipstx39/jmr3904: psxfenv01.exe
Result: invalid   
Time: 0:00:00.251639 psxfenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxfenv01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxfenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16ca8 lma 0
=>  Loading section .init, size 0x40 lma 16ca8
=>  Loading section .fini, size 0x20 lma 16ce8
=>  Loading section .rodata, size 0x21ed lma 16d08
=>  Loading section .eh_frame_hdr, size 0xdfc lma 18ef8
=>  Loading section .eh_frame, size 0x4a90 lma 19cf4
=>  Loading section .ctors, size 0x8 lma 1e784
=>  Loading section .dtors, size 0x8 lma 1e78c
=>  Loading section .got2, size 0x2c lma 1e794
=>  Loading section .rtemsroset, size 0x6c lma 1e7c0
=>  Loading section .data, size 0x338 lma 1e830
=>  Loading section .sdata, size 0xa5 lma 1eb68
=>  Start address 4
=>  Transfer rate: 1007664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1426/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1418 W:0    | mipstx39/jmr3904: psxfile01.exe
Result: invalid   
Time: 0:00:00.537433 psxfile01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxfile01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxfile01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x28f20 lma 0
=>  Loading section .init, size 0x40 lma 28f20
=>  Loading section .fini, size 0x20 lma 28f60
=>  Loading section .rodata, size 0x488f lma 28f80
=>  Loading section .eh_frame_hdr, size 0x11cc lma 2d810
=>  Loading section .eh_frame, size 0x7320 lma 2e9dc
=>  Loading section .tdata, size 0xc lma 35cfc
=>  Loading section .ctors, size 0x8 lma 35d08
=>  Loading section .dtors, size 0x8 lma 35d10
=>  Loading section .got2, size 0x2c lma 35d18
=>  Loading section .rtemsroset, size 0x70 lma 35d44
=>  Loading section .data, size 0x55c lma 35db8
=>  Loading section .sdata, size 0xc4 lma 36318
=>  Start address 4
=>  Transfer rate: 1777304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfile01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1427/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1418 W:0    | mipstx39/jmr3904: psxfile02.exe
Result: invalid   
Time: 0:00:00.260517 psxfile02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxfile02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxfile02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1591c lma 0
=>  Loading section .init, size 0x40 lma 1591c
=>  Loading section .fini, size 0x20 lma 1595c
=>  Loading section .rodata, size 0x2a78 lma 15980
=>  Loading section .eh_frame_hdr, size 0xcfc lma 183f8
=>  Loading section .eh_frame, size 0x4438 lma 190f4
=>  Loading section .ctors, size 0x8 lma 1d52c
=>  Loading section .dtors, size 0x8 lma 1d534
=>  Loading section .got2, size 0x2c lma 1d53c
=>  Loading section .rtemsroset, size 0x70 lma 1d568
=>  Loading section .data, size 0x364 lma 1d5d8
=>  Loading section .sdata, size 0xa5 lma 1d940
=>  Start address 4
=>  Transfer rate: 970472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfile02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1428/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1418 W:0    | mipstx39/jmr3904: psxfilelock01.exe
Result: invalid   
Time: 0:00:00.284047 psxfilelock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxfilelock01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxfilelock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15d2c lma 0
=>  Loading section .init, size 0x40 lma 15d2c
=>  Loading section .fini, size 0x20 lma 15d6c
=>  Loading section .rodata, size 0x2008 lma 15d90
=>  Loading section .eh_frame_hdr, size 0xdc4 lma 17d98
=>  Loading section .eh_frame, size 0x4830 lma 18b5c
=>  Loading section .tdata, size 0xc lma 1d38c
=>  Loading section .ctors, size 0x8 lma 1d398
=>  Loading section .dtors, size 0x8 lma 1d3a0
=>  Loading section .got2, size 0x2c lma 1d3a8
=>  Loading section .rtemsroset, size 0x70 lma 1d3d4
=>  Loading section .data, size 0x374 lma 1d448
=>  Loading section .sdata, size 0xa9 lma 1d7c0
=>  Start address 4
=>  Transfer rate: 967400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxfilelock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1429/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1420 W:0    | mipstx39/jmr3904: psxftw01.exe
Result: invalid   
Time: 0:00:00.254967 psxftw01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxftw01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxftw01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e008 lma 0
=>  Loading section .init, size 0x40 lma 1e008
=>  Loading section .fini, size 0x20 lma 1e048
=>  Loading section .rodata, size 0x491c lma 1e068
=>  Loading section .eh_frame_hdr, size 0x11d4 lma 22984
=>  Loading section .eh_frame, size 0x6138 lma 23b58
=>  Loading section .ctors, size 0x8 lma 29c90
=>  Loading section .dtors, size 0x8 lma 29c98
=>  Loading section .got2, size 0x2c lma 29ca0
=>  Loading section .rtemsroset, size 0x7c lma 29ccc
=>  Loading section .data, size 0x3ec lma 29d48
=>  Loading section .sdata, size 0xc1 lma 2a134
=>  Start address 4
=>  Transfer rate: 1380264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxftw01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1430/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1421 W:0    | mipstx39/jmr3904: psxgetattrnp01.exe
Result: invalid   
Time: 0:00:00.257218 psxgetattrnp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxgetattrnp01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxgetattrnp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15ee0 lma 0
=>  Loading section .init, size 0x40 lma 15ee0
=>  Loading section .fini, size 0x20 lma 15f20
=>  Loading section .rodata, size 0x2480 lma 15f40
=>  Loading section .eh_frame_hdr, size 0xddc lma 183c0
=>  Loading section .eh_frame, size 0x4808 lma 1919c
=>  Loading section .tdata, size 0xc lma 1d9a4
=>  Loading section .ctors, size 0x8 lma 1d9b0
=>  Loading section .dtors, size 0x8 lma 1d9b8
=>  Loading section .got2, size 0x2c lma 1d9c0
=>  Loading section .rtemsroset, size 0x6c lma 1d9ec
=>  Loading section .data, size 0x354 lma 1da58
=>  Loading section .sdata, size 0xa9 lma 1ddac
=>  Start address 4
=>  Transfer rate: 979624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxgetattrnp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1431/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1427 W:0    | mipstx39/jmr3904: psxgetrusage01.exe
Result: invalid   
Time: 0:00:00.258935 psxgetrusage01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxgetrusage01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxgetrusage01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x141c8 lma 0
=>  Loading section .init, size 0x40 lma 141c8
=>  Loading section .fini, size 0x20 lma 14208
=>  Loading section .rodata, size 0x2148 lma 14228
=>  Loading section .eh_frame_hdr, size 0xc9c lma 16370
=>  Loading section .eh_frame, size 0x4170 lma 1700c
=>  Loading section .ctors, size 0x8 lma 1b17c
=>  Loading section .dtors, size 0x8 lma 1b184
=>  Loading section .got2, size 0x2c lma 1b18c
=>  Loading section .rtemsroset, size 0x70 lma 1b1b8
=>  Loading section .data, size 0x368 lma 1b228
=>  Loading section .sdata, size 0xa9 lma 1b590
=>  Start address 4
=>  Transfer rate: 897480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxgetrusage01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1432/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1428 W:0    | mipstx39/jmr3904: psxglobalcon01.exe
Result: invalid   
Time: 0:00:00.575534 psxglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13878 lma 0
=>  Loading section .init, size 0x40 lma 13878
=>  Loading section .fini, size 0x20 lma 138b8
=>  Loading section .rodata, size 0x1f58 lma 138d8
=>  Loading section .eh_frame_hdr, size 0xc84 lma 15830
=>  Loading section .eh_frame, size 0x40b4 lma 164b4
=>  Loading section .ctors, size 0xc lma 1a568
=>  Loading section .dtors, size 0x8 lma 1a574
=>  Loading section .got2, size 0x2c lma 1a57c
=>  Loading section .rtemsroset, size 0x6c lma 1a5a8
=>  Loading section .data, size 0x34c lma 1a618
=>  Loading section .sdata, size 0xa9 lma 1a964
=>  Start address 4
=>  Transfer rate: 872520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1433/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1428 W:0    | mipstx39/jmr3904: psxglobalcon02.exe
Result: invalid   
Time: 0:00:00.261787 psxglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13d38 lma 0
=>  Loading section .init, size 0x40 lma 13d38
=>  Loading section .fini, size 0x20 lma 13d78
=>  Loading section .rodata, size 0x1f80 lma 13d98
=>  Loading section .eh_frame_hdr, size 0xcd4 lma 15d18
=>  Loading section .eh_frame, size 0x425c lma 169ec
=>  Loading section .ctors, size 0xc lma 1ac48
=>  Loading section .dtors, size 0x8 lma 1ac54
=>  Loading section .got2, size 0x2c lma 1ac5c
=>  Loading section .rtemsroset, size 0x74 lma 1ac88
=>  Loading section .data, size 0x3c4 lma 1ad00
=>  Loading section .sdata, size 0xa9 lma 1b0c4
=>  Start address 4
=>  Transfer rate: 887624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1434/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1428 W:0    | mipstx39/jmr3904: psxid01.exe
Result: invalid   
Time: 0:00:00.264360 psxid01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxid01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxid01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17578 lma 0
=>  Loading section .init, size 0x40 lma 17578
=>  Loading section .fini, size 0x20 lma 175b8
=>  Loading section .rodata, size 0x22fd lma 175d8
=>  Loading section .eh_frame_hdr, size 0xefc lma 198d8
=>  Loading section .eh_frame, size 0x4de4 lma 1a7d4
=>  Loading section .tdata, size 0xc lma 1f5b8
=>  Loading section .ctors, size 0x8 lma 1f5c4
=>  Loading section .dtors, size 0x8 lma 1f5cc
=>  Loading section .got2, size 0x2c lma 1f5d4
=>  Loading section .rtemsroset, size 0x70 lma 1f600
=>  Loading section .data, size 0x39c lma 1f670
=>  Loading section .sdata, size 0xb1 lma 1fa10
=>  Start address 4
=>  Transfer rate: 1037776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxid01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1435/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1428 W:0    | mipstx39/jmr3904: psximfs01.exe
Result: invalid   
Time: 0:00:00.556762 psximfs01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psximfs01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psximfs01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14e9c lma 0
=>  Loading section .init, size 0x40 lma 14e9c
=>  Loading section .fini, size 0x20 lma 14edc
=>  Loading section .rodata, size 0x2ad4 lma 14f00
=>  Loading section .eh_frame_hdr, size 0xd14 lma 179d4
=>  Loading section .eh_frame, size 0x43e4 lma 186e8
=>  Loading section .ctors, size 0x8 lma 1cacc
=>  Loading section .dtors, size 0x8 lma 1cad4
=>  Loading section .got2, size 0x2c lma 1cadc
=>  Loading section .rtemsroset, size 0x70 lma 1cb08
=>  Loading section .data, size 0x364 lma 1cb78
=>  Loading section .sdata, size 0xa5 lma 1cee0
=>  Start address 4
=>  Transfer rate: 949224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psximfs01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1436/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1428 W:0    | mipstx39/jmr3904: psximfs02.exe
Result: invalid   
Time: 0:00:00.570188 psximfs02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psximfs02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psximfs02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d570 lma 0
=>  Loading section .init, size 0x40 lma 1d570
=>  Loading section .fini, size 0x20 lma 1d5b0
=>  Loading section .rodata, size 0x2dab lma 1d5d0
=>  Loading section .eh_frame_hdr, size 0xf5c lma 2037c
=>  Loading section .eh_frame, size 0x53f0 lma 212d8
=>  Loading section .ctors, size 0x8 lma 266c8
=>  Loading section .dtors, size 0x8 lma 266d0
=>  Loading section .got2, size 0x2c lma 266d8
=>  Loading section .rtemsroset, size 0x74 lma 26704
=>  Loading section .data, size 0x4f0 lma 26778
=>  Loading section .sdata, size 0xc9 lma 26c68
=>  Start address 4
=>  Transfer rate: 1272192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psximfs02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1437/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1428 W:0    | mipstx39/jmr3904: psxintrcritical01.exe
Result: invalid   
Time: 0:00:00.541518 psxintrcritical01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxintrcritical01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxintrcritical01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a8cc lma 0
=>  Loading section .init, size 0x40 lma 1a8cc
=>  Loading section .fini, size 0x20 lma 1a90c
=>  Loading section .rodata, size 0x30c4 lma 1a930
=>  Loading section .eh_frame_hdr, size 0x1064 lma 1d9f4
=>  Loading section .eh_frame, size 0x56a0 lma 1ea58
=>  Loading section .ctors, size 0x8 lma 240f8
=>  Loading section .dtors, size 0x8 lma 24100
=>  Loading section .got2, size 0x2c lma 24108
=>  Loading section .rtemsroset, size 0x84 lma 24134
=>  Loading section .data, size 0x484 lma 241b8
=>  Loading section .sdata, size 0xb5 lma 24640
=>  Start address 4
=>  Transfer rate: 1193832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxintrcritical01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1438/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1428 W:0    | mipstx39/jmr3904: psxinttypes01.exe
Result: invalid   
Time: 0:00:00.288883 psxinttypes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxinttypes01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxinttypes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18458 lma 0
=>  Loading section .init, size 0x40 lma 18458
=>  Loading section .fini, size 0x20 lma 18498
=>  Loading section .rodata, size 0x24f2 lma 184b8
=>  Loading section .eh_frame_hdr, size 0xe2c lma 1a9ac
=>  Loading section .eh_frame, size 0x4d5c lma 1b7d8
=>  Loading section .ctors, size 0x8 lma 20534
=>  Loading section .dtors, size 0x8 lma 2053c
=>  Loading section .got2, size 0x2c lma 20544
=>  Loading section .rtemsroset, size 0x6c lma 20570
=>  Loading section .data, size 0x4a4 lma 205e0
=>  Loading section .sdata, size 0xa1 lma 20a84
=>  Start address 4
=>  Transfer rate: 1071352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxinttypes01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1439/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1431 W:0    | mipstx39/jmr3904: psxitimer.exe
Result: invalid   
Time: 0:00:00.305963 psxitimer.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxitimer.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxitimer.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c48 lma 0
=>  Loading section .init, size 0x40 lma 14c48
=>  Loading section .fini, size 0x20 lma 14c88
=>  Loading section .rodata, size 0x21bc lma 14ca8
=>  Loading section .eh_frame_hdr, size 0xd24 lma 16e64
=>  Loading section .eh_frame, size 0x43b8 lma 17b88
=>  Loading section .ctors, size 0x8 lma 1bf40
=>  Loading section .dtors, size 0x8 lma 1bf48
=>  Loading section .got2, size 0x2c lma 1bf50
=>  Loading section .rtemsroset, size 0x70 lma 1bf7c
=>  Loading section .data, size 0x368 lma 1bff0
=>  Loading section .sdata, size 0xbd lma 1c358
=>  Start address 4
=>  Transfer rate: 925832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxitimer.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1440/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1431 W:0    | mipstx39/jmr3904: psxkey01.exe
Result: invalid   
Time: 0:00:00.283674 psxkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13358 lma 0
=>  Loading section .init, size 0x40 lma 13358
=>  Loading section .fini, size 0x20 lma 13398
=>  Loading section .rodata, size 0x2220 lma 133b8
=>  Loading section .eh_frame_hdr, size 0xc5c lma 155d8
=>  Loading section .eh_frame, size 0x3ffc lma 16234
=>  Loading section .ctors, size 0x8 lma 1a230
=>  Loading section .dtors, size 0x8 lma 1a238
=>  Loading section .got2, size 0x2c lma 1a240
=>  Loading section .rtemsroset, size 0x70 lma 1a26c
=>  Loading section .data, size 0x3b0 lma 1a2e0
=>  Loading section .sdata, size 0x95 lma 1a690
=>  Start address 4
=>  Transfer rate: 866568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1441/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1432 W:0    | mipstx39/jmr3904: psxkey02.exe
Result: invalid   
Time: 0:00:00.511668 psxkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13fd8 lma 0
=>  Loading section .init, size 0x40 lma 13fd8
=>  Loading section .fini, size 0x20 lma 14018
=>  Loading section .rodata, size 0x2038 lma 14038
=>  Loading section .eh_frame_hdr, size 0xccc lma 16070
=>  Loading section .eh_frame, size 0x42bc lma 16d3c
=>  Loading section .ctors, size 0x8 lma 1aff8
=>  Loading section .dtors, size 0x8 lma 1b000
=>  Loading section .got2, size 0x2c lma 1b008
=>  Loading section .rtemsroset, size 0x70 lma 1b034
=>  Loading section .data, size 0x3b0 lma 1b0a8
=>  Loading section .sdata, size 0x95 lma 1b458
=>  Start address 4
=>  Transfer rate: 894792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1442/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1432 W:0    | mipstx39/jmr3904: psxkey03.exe
Result: invalid   
Time: 0:00:00.272293 psxkey03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x151e8 lma 0
=>  Loading section .init, size 0x40 lma 151e8
=>  Loading section .fini, size 0x20 lma 15228
=>  Loading section .rodata, size 0x2154 lma 15248
=>  Loading section .eh_frame_hdr, size 0xd5c lma 1739c
=>  Loading section .eh_frame, size 0x4548 lma 180f8
=>  Loading section .ctors, size 0x8 lma 1c640
=>  Loading section .dtors, size 0x8 lma 1c648
=>  Loading section .got2, size 0x2c lma 1c650
=>  Loading section .rtemsroset, size 0x74 lma 1c67c
=>  Loading section .data, size 0x3d8 lma 1c6f0
=>  Loading section .sdata, size 0xa9 lma 1cac8
=>  Start address 4
=>  Transfer rate: 940936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1443/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1439 W:0    | mipstx39/jmr3904: psxkey04.exe
Result: invalid   
Time: 0:00:00.276982 psxkey04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15228 lma 0
=>  Loading section .init, size 0x40 lma 15228
=>  Loading section .fini, size 0x20 lma 15268
=>  Loading section .rodata, size 0x2154 lma 15288
=>  Loading section .eh_frame_hdr, size 0xd64 lma 173dc
=>  Loading section .eh_frame, size 0x452c lma 18140
=>  Loading section .ctors, size 0x8 lma 1c66c
=>  Loading section .dtors, size 0x8 lma 1c674
=>  Loading section .got2, size 0x2c lma 1c67c
=>  Loading section .rtemsroset, size 0x74 lma 1c6a8
=>  Loading section .data, size 0x3d8 lma 1c720
=>  Loading section .sdata, size 0xb1 lma 1caf8
=>  Start address 4
=>  Transfer rate: 941352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1444/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1439 W:0    | mipstx39/jmr3904: psxkey05.exe
Result: invalid   
Time: 0:00:00.276246 psxkey05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13858 lma 0
=>  Loading section .init, size 0x40 lma 13858
=>  Loading section .fini, size 0x20 lma 13898
=>  Loading section .rodata, size 0x2044 lma 138b8
=>  Loading section .eh_frame_hdr, size 0xc54 lma 158fc
=>  Loading section .eh_frame, size 0x404c lma 16550
=>  Loading section .ctors, size 0x8 lma 1a59c
=>  Loading section .dtors, size 0x8 lma 1a5a4
=>  Loading section .got2, size 0x2c lma 1a5ac
=>  Loading section .rtemsroset, size 0x70 lma 1a5d8
=>  Loading section .data, size 0x3b0 lma 1a648
=>  Loading section .sdata, size 0x9d lma 1a9f8
=>  Start address 4
=>  Transfer rate: 873640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1445/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1439 W:0    | mipstx39/jmr3904: psxkey06.exe
Result: invalid   
Time: 0:00:00.544487 psxkey06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15e28 lma 0
=>  Loading section .init, size 0x40 lma 15e28
=>  Loading section .fini, size 0x20 lma 15e68
=>  Loading section .rodata, size 0x2404 lma 15e88
=>  Loading section .eh_frame_hdr, size 0xdac lma 1828c
=>  Loading section .eh_frame, size 0x46fc lma 19038
=>  Loading section .ctors, size 0x8 lma 1d734
=>  Loading section .dtors, size 0x8 lma 1d73c
=>  Loading section .got2, size 0x2c lma 1d744
=>  Loading section .rtemsroset, size 0x74 lma 1d770
=>  Loading section .data, size 0x3e8 lma 1d7e8
=>  Loading section .sdata, size 0xa9 lma 1dbd0
=>  Start address 4
=>  Transfer rate: 975784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1446/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1439 W:0    | mipstx39/jmr3904: psxkey07.exe
Result: invalid   
Time: 0:00:00.254955 psxkey07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x171d4 lma 0
=>  Loading section .init, size 0x40 lma 171d4
=>  Loading section .fini, size 0x20 lma 17214
=>  Loading section .rodata, size 0x22ec lma 17238
=>  Loading section .eh_frame_hdr, size 0xe94 lma 19524
=>  Loading section .eh_frame, size 0x4d3c lma 1a3b8
=>  Loading section .ctors, size 0x8 lma 1f0f4
=>  Loading section .dtors, size 0x8 lma 1f0fc
=>  Loading section .got2, size 0x2c lma 1f104
=>  Loading section .rtemsroset, size 0x74 lma 1f130
=>  Loading section .data, size 0x3d8 lma 1f1a8
=>  Loading section .sdata, size 0xac lma 1f580
=>  Start address 4
=>  Transfer rate: 1028384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1447/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1439 W:0    | mipstx39/jmr3904: psxkey08.exe
Result: invalid   
Time: 0:00:00.584831 psxkey08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15850 lma 0
=>  Loading section .init, size 0x40 lma 15850
=>  Loading section .fini, size 0x20 lma 15890
=>  Loading section .rodata, size 0x2200 lma 158b0
=>  Loading section .eh_frame_hdr, size 0xdbc lma 17ab0
=>  Loading section .eh_frame, size 0x4830 lma 1886c
=>  Loading section .ctors, size 0x8 lma 1d09c
=>  Loading section .dtors, size 0x8 lma 1d0a4
=>  Loading section .got2, size 0x2c lma 1d0ac
=>  Loading section .rtemsroset, size 0x74 lma 1d0d8
=>  Loading section .data, size 0x3e0 lma 1d150
=>  Loading section .sdata, size 0x99 lma 1d530
=>  Start address 4
=>  Transfer rate: 962088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1448/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1439 W:0    | mipstx39/jmr3904: psxkey09.exe
Result: invalid   
Time: 0:00:00.529614 psxkey09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey09.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15028 lma 0
=>  Loading section .init, size 0x40 lma 15028
=>  Loading section .fini, size 0x20 lma 15068
=>  Loading section .rodata, size 0x20fc lma 15088
=>  Loading section .eh_frame_hdr, size 0xd5c lma 17184
=>  Loading section .eh_frame, size 0x451c lma 17ee0
=>  Loading section .ctors, size 0x8 lma 1c3fc
=>  Loading section .dtors, size 0x8 lma 1c404
=>  Loading section .got2, size 0x2c lma 1c40c
=>  Loading section .rtemsroset, size 0x74 lma 1c438
=>  Loading section .data, size 0x3d8 lma 1c4b0
=>  Loading section .sdata, size 0xb1 lma 1c888
=>  Start address 4
=>  Transfer rate: 936360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey09.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1449/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1439 W:0    | mipstx39/jmr3904: psxkey10.exe
Result: invalid   
Time: 0:00:00.516148 psxkey10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey10.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15028 lma 0
=>  Loading section .init, size 0x40 lma 15028
=>  Loading section .fini, size 0x20 lma 15068
=>  Loading section .rodata, size 0x210c lma 15088
=>  Loading section .eh_frame_hdr, size 0xd5c lma 17194
=>  Loading section .eh_frame, size 0x451c lma 17ef0
=>  Loading section .ctors, size 0x8 lma 1c40c
=>  Loading section .dtors, size 0x8 lma 1c414
=>  Loading section .got2, size 0x2c lma 1c41c
=>  Loading section .rtemsroset, size 0x74 lma 1c448
=>  Loading section .data, size 0x3d8 lma 1c4c0
=>  Loading section .sdata, size 0xa9 lma 1c898
=>  Start address 4
=>  Transfer rate: 936424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey10.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1450/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1443 W:0    | mipstx39/jmr3904: psxmmap01.exe
Result: invalid   
Time: 0:00:00.289942 psxmmap01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxmmap01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxmmap01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1e9f8 lma 0
=>  Loading section .init, size 0x40 lma 1e9f8
=>  Loading section .fini, size 0x20 lma 1ea38
=>  Loading section .rodata, size 0x2b0b lma 1ea58
=>  Loading section .eh_frame_hdr, size 0x107c lma 21564
=>  Loading section .eh_frame, size 0x5b0c lma 225e0
=>  Loading section .tdata, size 0xc lma 280ec
=>  Loading section .ctors, size 0x8 lma 280f8
=>  Loading section .dtors, size 0x8 lma 28100
=>  Loading section .got2, size 0x2c lma 28108
=>  Loading section .rtemsroset, size 0x78 lma 28134
=>  Loading section .data, size 0x548 lma 281b0
=>  Loading section .sdata, size 0xbd lma 286f8
=>  Start address 4
=>  Transfer rate: 1326464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmmap01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1451/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1443 W:0    | mipstx39/jmr3904: psxmount.exe
Result: invalid   
Time: 0:00:00.301595 psxmount.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxmount.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxmount.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1686c lma 0
=>  Loading section .init, size 0x40 lma 1686c
=>  Loading section .fini, size 0x20 lma 168ac
=>  Loading section .rodata, size 0x31e0 lma 168d0
=>  Loading section .eh_frame_hdr, size 0xd94 lma 19ab0
=>  Loading section .eh_frame, size 0x47ec lma 1a844
=>  Loading section .tdata, size 0xc lma 1f030
=>  Loading section .ctors, size 0x8 lma 1f03c
=>  Loading section .dtors, size 0x8 lma 1f044
=>  Loading section .got2, size 0x2c lma 1f04c
=>  Loading section .rtemsroset, size 0x70 lma 1f078
=>  Loading section .data, size 0x42c lma 1f0e8
=>  Loading section .sdata, size 0x91 lma 1f514
=>  Start address 4
=>  Transfer rate: 1027336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmount.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1452/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1443 W:0    | mipstx39/jmr3904: psxmsgq01.exe
Result: invalid   
Time: 0:00:00.517044 psxmsgq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxmsgq01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxmsgq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x2bc9c lma 0
=>  Loading section .init, size 0x40 lma 2bc9c
=>  Loading section .fini, size 0x20 lma 2bcdc
=>  Loading section .rodata, size 0x4b9f lma 2bd00
=>  Loading section .eh_frame_hdr, size 0x1394 lma 308a0
=>  Loading section .eh_frame, size 0x6c00 lma 31c34
=>  Loading section .tdata, size 0xc lma 38834
=>  Loading section .ctors, size 0x8 lma 38840
=>  Loading section .dtors, size 0x8 lma 38848
=>  Loading section .got2, size 0x2c lma 38850
=>  Loading section .rtemsroset, size 0x7c lma 3887c
=>  Loading section .data, size 0x7ac lma 388f8
=>  Loading section .sdata, size 0xd4 lma 390a8
=>  Start address 4
=>  Transfer rate: 1870744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmsgq01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1453/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1443 W:0    | mipstx39/jmr3904: psxmsgq02.exe
Result: invalid   
Time: 0:00:00.265122 psxmsgq02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxmsgq02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxmsgq02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ac84 lma 0
=>  Loading section .init, size 0x40 lma 1ac84
=>  Loading section .fini, size 0x20 lma 1acc4
=>  Loading section .rodata, size 0x2fa2 lma 1ace8
=>  Loading section .eh_frame_hdr, size 0xf64 lma 1dc8c
=>  Loading section .eh_frame, size 0x505c lma 1ebf0
=>  Loading section .ctors, size 0x8 lma 23c4c
=>  Loading section .dtors, size 0x8 lma 23c54
=>  Loading section .got2, size 0x2c lma 23c5c
=>  Loading section .rtemsroset, size 0x74 lma 23c88
=>  Loading section .data, size 0x584 lma 23d00
=>  Loading section .sdata, size 0xd0 lma 24288
=>  Start address 4
=>  Transfer rate: 1186384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmsgq02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1454/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1449 W:0    | mipstx39/jmr3904: psxmsgq03.exe
Result: invalid   
Time: 0:00:00.253903 psxmsgq03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxmsgq03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxmsgq03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17e78 lma 0
=>  Loading section .init, size 0x40 lma 17e78
=>  Loading section .fini, size 0x20 lma 17eb8
=>  Loading section .rodata, size 0x2eda lma 17ed8
=>  Loading section .eh_frame_hdr, size 0xf54 lma 1adb4
=>  Loading section .eh_frame, size 0x501c lma 1bd08
=>  Loading section .tdata, size 0xc lma 20d24
=>  Loading section .ctors, size 0x8 lma 20d30
=>  Loading section .dtors, size 0x8 lma 20d38
=>  Loading section .got2, size 0x2c lma 20d40
=>  Loading section .rtemsroset, size 0x78 lma 20d6c
=>  Loading section .data, size 0x3dc lma 20de8
=>  Loading section .sdata, size 0xc1 lma 211c8
=>  Start address 4
=>  Transfer rate: 1086456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmsgq03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1455/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1449 W:0    | mipstx39/jmr3904: psxmsgq04.exe
Result: invalid   
Time: 0:00:00.266974 psxmsgq04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxmsgq04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxmsgq04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x171cc lma 0
=>  Loading section .init, size 0x40 lma 171cc
=>  Loading section .fini, size 0x20 lma 1720c
=>  Loading section .rodata, size 0x2b4c lma 17230
=>  Loading section .eh_frame_hdr, size 0xedc lma 19d7c
=>  Loading section .eh_frame, size 0x4d2c lma 1ac58
=>  Loading section .tdata, size 0xc lma 1f984
=>  Loading section .ctors, size 0x8 lma 1f990
=>  Loading section .dtors, size 0x8 lma 1f998
=>  Loading section .got2, size 0x2c lma 1f9a0
=>  Loading section .rtemsroset, size 0x74 lma 1f9cc
=>  Loading section .data, size 0x3a0 lma 1fa40
=>  Loading section .sdata, size 0xc1 lma 1fde0
=>  Start address 4
=>  Transfer rate: 1045736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmsgq04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1456/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1449 W:0    | mipstx39/jmr3904: psxmutexattr01.exe
Result: invalid   
Time: 0:00:00.765857 psxmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxmutexattr01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13db8 lma 0
=>  Loading section .init, size 0x40 lma 13db8
=>  Loading section .fini, size 0x20 lma 13df8
=>  Loading section .rodata, size 0x2214 lma 13e18
=>  Loading section .eh_frame_hdr, size 0xca4 lma 1602c
=>  Loading section .eh_frame, size 0x4194 lma 16cd0
=>  Loading section .ctors, size 0x8 lma 1ae64
=>  Loading section .dtors, size 0x8 lma 1ae6c
=>  Loading section .got2, size 0x2c lma 1ae74
=>  Loading section .rtemsroset, size 0x6c lma 1aea0
=>  Loading section .data, size 0x38c lma 1af10
=>  Loading section .sdata, size 0xa9 lma 1b29c
=>  Start address 4
=>  Transfer rate: 891400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1457/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1450 W:0    | mipstx39/jmr3904: psxndbm01.exe
Result: invalid   
Time: 0:00:00.504207 psxndbm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d384 lma 0
=>  Loading section .init, size 0x40 lma 1d384
=>  Loading section .fini, size 0x20 lma 1d3c4
=>  Loading section .rodata, size 0x29c8 lma 1d3e8
=>  Loading section .eh_frame_hdr, size 0x1024 lma 1fdb0
=>  Loading section .eh_frame, size 0x5dac lma 20dd4
=>  Loading section .ctors, size 0x8 lma 26b80
=>  Loading section .dtors, size 0x8 lma 26b88
=>  Loading section .got2, size 0x2c lma 26b90
=>  Loading section .rtemsroset, size 0x70 lma 26bbc
=>  Loading section .data, size 0x344 lma 26c30
=>  Loading section .sdata, size 0xac lma 26f74
=>  Start address 4
=>  Transfer rate: 1278144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1458/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1450 W:0    | mipstx39/jmr3904: psxobj01.exe
Result: invalid   
Time: 0:00:00.542891 psxobj01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxobj01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxobj01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1368c lma 0
=>  Loading section .init, size 0x40 lma 1368c
=>  Loading section .fini, size 0x20 lma 136cc
=>  Loading section .rodata, size 0x208c lma 136f0
=>  Loading section .eh_frame_hdr, size 0xc34 lma 1577c
=>  Loading section .eh_frame, size 0x3fcc lma 163b0
=>  Loading section .ctors, size 0x8 lma 1a37c
=>  Loading section .dtors, size 0x8 lma 1a384
=>  Loading section .got2, size 0x2c lma 1a38c
=>  Loading section .rtemsroset, size 0x6c lma 1a3b8
=>  Loading section .data, size 0x378 lma 1a428
=>  Loading section .sdata, size 0x91 lma 1a7a0
=>  Start address 4
=>  Transfer rate: 868680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxobj01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1459/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1450 W:0    | mipstx39/jmr3904: psxonce01.exe
Result: invalid   
Time: 0:00:00.555345 psxonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxonce01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13af8 lma 0
=>  Loading section .init, size 0x40 lma 13af8
=>  Loading section .fini, size 0x20 lma 13b38
=>  Loading section .rodata, size 0x20d4 lma 13b58
=>  Loading section .eh_frame_hdr, size 0xca4 lma 15c2c
=>  Loading section .eh_frame, size 0x4114 lma 168d0
=>  Loading section .ctors, size 0x8 lma 1a9e4
=>  Loading section .dtors, size 0x8 lma 1a9ec
=>  Loading section .got2, size 0x2c lma 1a9f4
=>  Loading section .rtemsroset, size 0x6c lma 1aa20
=>  Loading section .data, size 0x374 lma 1aa90
=>  Loading section .sdata, size 0x91 lma 1ae04
=>  Start address 4
=>  Transfer rate: 881800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1460/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1450 W:0    | mipstx39/jmr3904: psxpasswd01.exe
Result: invalid   
Time: 0:00:00.517401 psxpasswd01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17d70 lma 0
=>  Loading section .init, size 0x40 lma 17d70
=>  Loading section .fini, size 0x20 lma 17db0
=>  Loading section .rodata, size 0x255d lma 17dd0
=>  Loading section .eh_frame_hdr, size 0xf44 lma 1a330
=>  Loading section .eh_frame, size 0x4ff0 lma 1b274
=>  Loading section .tdata, size 0xc lma 20264
=>  Loading section .ctors, size 0x8 lma 20270
=>  Loading section .dtors, size 0x8 lma 20278
=>  Loading section .got2, size 0x2c lma 20280
=>  Loading section .rtemsroset, size 0x74 lma 202ac
=>  Loading section .data, size 0x400 lma 20320
=>  Loading section .sdata, size 0xa9 lma 20720
=>  Start address 4
=>  Transfer rate: 1064496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1461/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1453 W:0    | mipstx39/jmr3904: psxpasswd02.exe
Result: invalid   
Time: 0:00:00.551909 psxpasswd02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxpasswd02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxpasswd02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21df0 lma 0
=>  Loading section .init, size 0x40 lma 21df0
=>  Loading section .fini, size 0x20 lma 21e30
=>  Loading section .rodata, size 0x2bab lma 21e50
=>  Loading section .eh_frame_hdr, size 0x1084 lma 249fc
=>  Loading section .eh_frame, size 0x5ca8 lma 25a80
=>  Loading section .tdata, size 0xc lma 2b728
=>  Loading section .ctors, size 0x8 lma 2b734
=>  Loading section .dtors, size 0x8 lma 2b73c
=>  Loading section .got2, size 0x2c lma 2b744
=>  Loading section .rtemsroset, size 0x74 lma 2b770
=>  Loading section .data, size 0x56c lma 2b7e8
=>  Loading section .sdata, size 0xa9 lma 2bd58
=>  Start address 4
=>  Transfer rate: 1437632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxpasswd02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1462/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1453 W:0    | mipstx39/jmr3904: psxpipe01.exe
Result: invalid   
Time: 0:00:00.521927 psxpipe01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxpipe01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxpipe01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c908 lma 0
=>  Loading section .init, size 0x40 lma 1c908
=>  Loading section .fini, size 0x20 lma 1c948
=>  Loading section .rodata, size 0x287b lma 1c968
=>  Loading section .eh_frame_hdr, size 0xf04 lma 1f1e4
=>  Loading section .eh_frame, size 0x5240 lma 200e8
=>  Loading section .ctors, size 0x8 lma 25328
=>  Loading section .dtors, size 0x8 lma 25330
=>  Loading section .got2, size 0x2c lma 25338
=>  Loading section .rtemsroset, size 0x74 lma 25364
=>  Loading section .data, size 0x4f0 lma 253d8
=>  Loading section .sdata, size 0xb1 lma 258c8
=>  Start address 4
=>  Transfer rate: 1231808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxpipe01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1463/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1453 W:0    | mipstx39/jmr3904: psxrdwrv.exe
Result: invalid   
Time: 0:00:00.511813 psxrdwrv.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxrdwrv.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxrdwrv.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x173a8 lma 0
=>  Loading section .init, size 0x40 lma 173a8
=>  Loading section .fini, size 0x20 lma 173e8
=>  Loading section .rodata, size 0x2e44 lma 17408
=>  Loading section .eh_frame_hdr, size 0xe1c lma 1a24c
=>  Loading section .eh_frame, size 0x4acc lma 1b068
=>  Loading section .tdata, size 0xc lma 1fb34
=>  Loading section .ctors, size 0x8 lma 1fb40
=>  Loading section .dtors, size 0x8 lma 1fb48
=>  Loading section .got2, size 0x2c lma 1fb50
=>  Loading section .rtemsroset, size 0x70 lma 1fb7c
=>  Loading section .data, size 0x374 lma 1fbf0
=>  Loading section .sdata, size 0xa9 lma 1ff68
=>  Start address 4
=>  Transfer rate: 1048648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxrdwrv.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1464/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1455 W:0    | mipstx39/jmr3904: psxreaddir.exe
Result: invalid   
Time: 0:00:00.251728 psxreaddir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16930 lma 0
=>  Loading section .init, size 0x40 lma 16930
=>  Loading section .fini, size 0x20 lma 16970
=>  Loading section .rodata, size 0x2a98 lma 16990
=>  Loading section .eh_frame_hdr, size 0xd14 lma 19428
=>  Loading section .eh_frame, size 0x45b4 lma 1a13c
=>  Loading section .ctors, size 0x8 lma 1e6f0
=>  Loading section .dtors, size 0x8 lma 1e6f8
=>  Loading section .got2, size 0x2c lma 1e700
=>  Loading section .rtemsroset, size 0x6c lma 1e72c
=>  Loading section .data, size 0x42c lma 1e798
=>  Loading section .sdata, size 0x91 lma 1ebc4
=>  Start address 4
=>  Transfer rate: 1008296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1465/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1455 W:0    | mipstx39/jmr3904: psxrwlock01.exe
Result: invalid   
Time: 0:00:00.253795 psxrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxrwlock01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18dcc lma 0
=>  Loading section .init, size 0x40 lma 18dcc
=>  Loading section .fini, size 0x20 lma 18e0c
=>  Loading section .rodata, size 0x35e6 lma 18e30
=>  Loading section .eh_frame_hdr, size 0xe94 lma 1c418
=>  Loading section .eh_frame, size 0x4dbc lma 1d2ac
=>  Loading section .ctors, size 0x8 lma 22068
=>  Loading section .dtors, size 0x8 lma 22070
=>  Loading section .got2, size 0x2c lma 22078
=>  Loading section .rtemsroset, size 0x74 lma 220a4
=>  Loading section .data, size 0x3e8 lma 22118
=>  Loading section .sdata, size 0xb5 lma 22500
=>  Start address 4
=>  Transfer rate: 1125752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1466/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1463 W:0    | mipstx39/jmr3904: psxsem01.exe
Result: invalid   
Time: 0:00:00.260075 psxsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsem01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x21040 lma 0
=>  Loading section .init, size 0x40 lma 21040
=>  Loading section .fini, size 0x20 lma 21080
=>  Loading section .rodata, size 0x3a7b lma 210a0
=>  Loading section .eh_frame_hdr, size 0xf3c lma 24b1c
=>  Loading section .eh_frame, size 0x51c8 lma 25a58
=>  Loading section .ctors, size 0x8 lma 2ac20
=>  Loading section .dtors, size 0x8 lma 2ac28
=>  Loading section .got2, size 0x2c lma 2ac30
=>  Loading section .rtemsroset, size 0x74 lma 2ac5c
=>  Loading section .data, size 0x500 lma 2acd0
=>  Loading section .sdata, size 0xbd lma 2b1d0
=>  Start address 4
=>  Transfer rate: 1414240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1467/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1463 W:0    | mipstx39/jmr3904: psxshm01.exe
Result: invalid   
Time: 0:00:00.253261 psxshm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxshm01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxshm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1670c lma 0
=>  Loading section .init, size 0x40 lma 1670c
=>  Loading section .fini, size 0x20 lma 1674c
=>  Loading section .rodata, size 0x2a2c lma 16770
=>  Loading section .eh_frame_hdr, size 0xde4 lma 1919c
=>  Loading section .eh_frame, size 0x49ec lma 19f80
=>  Loading section .ctors, size 0x8 lma 1e96c
=>  Loading section .dtors, size 0x8 lma 1e974
=>  Loading section .got2, size 0x2c lma 1e97c
=>  Loading section .rtemsroset, size 0x74 lma 1e9a8
=>  Loading section .data, size 0x3a0 lma 1ea20
=>  Loading section .sdata, size 0xc1 lma 1edc0
=>  Start address 4
=>  Transfer rate: 1012680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxshm01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1468/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1463 W:0    | mipstx39/jmr3904: psxshm02.exe
Result: invalid   
Time: 0:00:00.257502 psxshm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxshm02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxshm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x169cc lma 0
=>  Loading section .init, size 0x40 lma 169cc
=>  Loading section .fini, size 0x20 lma 16a0c
=>  Loading section .rodata, size 0x2a2c lma 16a30
=>  Loading section .eh_frame_hdr, size 0xdf4 lma 1945c
=>  Loading section .eh_frame, size 0x4a7c lma 1a250
=>  Loading section .ctors, size 0x8 lma 1eccc
=>  Loading section .dtors, size 0x8 lma 1ecd4
=>  Loading section .got2, size 0x2c lma 1ecdc
=>  Loading section .rtemsroset, size 0x74 lma 1ed08
=>  Loading section .data, size 0x3a0 lma 1ed80
=>  Loading section .sdata, size 0xc1 lma 1f120
=>  Start address 4
=>  Transfer rate: 1019592 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxshm02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1469/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1463 W:0    | mipstx39/jmr3904: psxsignal01.exe
Result: invalid   
Time: 0:00:00.258910 psxsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1be38 lma 0
=>  Loading section .init, size 0x40 lma 1be38
=>  Loading section .fini, size 0x20 lma 1be78
=>  Loading section .rodata, size 0x2932 lma 1be98
=>  Loading section .eh_frame_hdr, size 0x1024 lma 1e7cc
=>  Loading section .eh_frame, size 0x5454 lma 1f7f0
=>  Loading section .ctors, size 0x8 lma 24c44
=>  Loading section .dtors, size 0x8 lma 24c4c
=>  Loading section .got2, size 0x2c lma 24c54
=>  Loading section .rtemsroset, size 0x78 lma 24c80
=>  Loading section .data, size 0x5a0 lma 24cf8
=>  Loading section .sdata, size 0xd4 lma 25298
=>  Start address 4
=>  Transfer rate: 1219408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1470/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1464 W:0    | mipstx39/jmr3904: psxsignal02.exe
Result: invalid   
Time: 0:00:00.253578 psxsignal02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16e00 lma 0
=>  Loading section .init, size 0x40 lma 16e00
=>  Loading section .fini, size 0x20 lma 16e40
=>  Loading section .rodata, size 0x2298 lma 16e60
=>  Loading section .eh_frame_hdr, size 0xe6c lma 190f8
=>  Loading section .eh_frame, size 0x4b7c lma 19f64
=>  Loading section .ctors, size 0x8 lma 1eae0
=>  Loading section .dtors, size 0x8 lma 1eae8
=>  Loading section .got2, size 0x2c lma 1eaf0
=>  Loading section .rtemsroset, size 0x74 lma 1eb1c
=>  Loading section .data, size 0x3f4 lma 1eb90
=>  Loading section .sdata, size 0xc1 lma 1ef88
=>  Start address 4
=>  Transfer rate: 1016360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1471/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1463 W:0    | mipstx39/jmr3904: psxsignal03.exe
Result: invalid   
Time: 0:00:00.255154 psxsignal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16d6c lma 0
=>  Loading section .init, size 0x40 lma 16d6c
=>  Loading section .fini, size 0x20 lma 16dac
=>  Loading section .rodata, size 0x2418 lma 16dd0
=>  Loading section .eh_frame_hdr, size 0xe4c lma 191e8
=>  Loading section .eh_frame, size 0x4a08 lma 1a034
=>  Loading section .ctors, size 0x8 lma 1ea3c
=>  Loading section .dtors, size 0x8 lma 1ea44
=>  Loading section .got2, size 0x2c lma 1ea4c
=>  Loading section .rtemsroset, size 0x74 lma 1ea78
=>  Loading section .data, size 0x37c lma 1eaf0
=>  Loading section .sdata, size 0xc5 lma 1ee70
=>  Start address 4
=>  Transfer rate: 1014088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1472/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1464 W:0    | mipstx39/jmr3904: psxsignal04.exe
Result: invalid   
Time: 0:00:00.259913 psxsignal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16d6c lma 0
=>  Loading section .init, size 0x40 lma 16d6c
=>  Loading section .fini, size 0x20 lma 16dac
=>  Loading section .rodata, size 0x2438 lma 16dd0
=>  Loading section .eh_frame_hdr, size 0xe4c lma 19208
=>  Loading section .eh_frame, size 0x4a08 lma 1a054
=>  Loading section .ctors, size 0x8 lma 1ea5c
=>  Loading section .dtors, size 0x8 lma 1ea64
=>  Loading section .got2, size 0x2c lma 1ea6c
=>  Loading section .rtemsroset, size 0x74 lma 1ea98
=>  Loading section .data, size 0x37c lma 1eb10
=>  Loading section .sdata, size 0xc5 lma 1ee90
=>  Start address 4
=>  Transfer rate: 1014344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1473/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1464 W:0    | mipstx39/jmr3904: psxsignal05.exe
Result: invalid   
Time: 0:00:00.259797 psxsignal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14e60 lma 0
=>  Loading section .init, size 0x40 lma 14e60
=>  Loading section .fini, size 0x20 lma 14ea0
=>  Loading section .rodata, size 0x21ec lma 14ec0
=>  Loading section .eh_frame_hdr, size 0xd64 lma 170ac
=>  Loading section .eh_frame, size 0x44f8 lma 17e10
=>  Loading section .ctors, size 0x8 lma 1c308
=>  Loading section .dtors, size 0x8 lma 1c310
=>  Loading section .got2, size 0x2c lma 1c318
=>  Loading section .rtemsroset, size 0x74 lma 1c344
=>  Loading section .data, size 0x368 lma 1c3b8
=>  Loading section .sdata, size 0xc1 lma 1c720
=>  Start address 4
=>  Transfer rate: 933640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1474/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1469 W:0    | mipstx39/jmr3904: psxsignal06.exe
Result: invalid   
Time: 0:00:00.252662 psxsignal06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17198 lma 0
=>  Loading section .init, size 0x40 lma 17198
=>  Loading section .fini, size 0x20 lma 171d8
=>  Loading section .rodata, size 0x22da lma 171f8
=>  Loading section .eh_frame_hdr, size 0xeac lma 194d4
=>  Loading section .eh_frame, size 0x4ca0 lma 1a380
=>  Loading section .ctors, size 0x8 lma 1f020
=>  Loading section .dtors, size 0x8 lma 1f028
=>  Loading section .got2, size 0x2c lma 1f030
=>  Loading section .rtemsroset, size 0x74 lma 1f05c
=>  Loading section .data, size 0x370 lma 1f0d0
=>  Loading section .sdata, size 0xc1 lma 1f440
=>  Start address 4
=>  Transfer rate: 1026040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1475/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1467 W:0    | mipstx39/jmr3904: psxsignal07.exe
Result: invalid   
Time: 0:00:00.254349 psxsignal07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19d0c lma 0
=>  Loading section .init, size 0x40 lma 19d0c
=>  Loading section .fini, size 0x20 lma 19d4c
=>  Loading section .rodata, size 0x2436 lma 19d70
=>  Loading section .eh_frame_hdr, size 0x101c lma 1c1a8
=>  Loading section .eh_frame, size 0x55a4 lma 1d1c4
=>  Loading section .ctors, size 0x8 lma 22768
=>  Loading section .dtors, size 0x8 lma 22770
=>  Loading section .got2, size 0x2c lma 22778
=>  Loading section .rtemsroset, size 0x78 lma 227a4
=>  Loading section .data, size 0x3d4 lma 22820
=>  Loading section .sdata, size 0xdc lma 22bf8
=>  Start address 4
=>  Transfer rate: 1140272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1476/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1471 W:0    | mipstx39/jmr3904: psxsignal08.exe
Result: invalid   
Time: 0:00:00.506331 psxsignal08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsignal08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19510 lma 0
=>  Loading section .init, size 0x40 lma 19510
=>  Loading section .fini, size 0x20 lma 19550
=>  Loading section .rodata, size 0x27c2 lma 19570
=>  Loading section .eh_frame_hdr, size 0xf9c lma 1bd34
=>  Loading section .eh_frame, size 0x5318 lma 1ccd0
=>  Loading section .ctors, size 0x8 lma 21fe8
=>  Loading section .dtors, size 0x8 lma 21ff0
=>  Loading section .got2, size 0x2c lma 21ff8
=>  Loading section .rtemsroset, size 0x74 lma 22024
=>  Loading section .data, size 0x35c lma 22098
=>  Loading section .sdata, size 0xc8 lma 223f8
=>  Start address 4
=>  Transfer rate: 1123792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1477/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1471 W:0    | mipstx39/jmr3904: psxspin01.exe
Result: invalid   
Time: 0:00:00.255305 psxspin01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxspin01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxspin01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14560 lma 0
=>  Loading section .init, size 0x40 lma 14560
=>  Loading section .fini, size 0x20 lma 145a0
=>  Loading section .rodata, size 0x21e8 lma 145c0
=>  Loading section .eh_frame_hdr, size 0xcbc lma 167a8
=>  Loading section .eh_frame, size 0x41f8 lma 17464
=>  Loading section .ctors, size 0x8 lma 1b65c
=>  Loading section .dtors, size 0x8 lma 1b664
=>  Loading section .got2, size 0x2c lma 1b66c
=>  Loading section .rtemsroset, size 0x70 lma 1b698
=>  Loading section .data, size 0x368 lma 1b708
=>  Loading section .sdata, size 0xa9 lma 1ba70
=>  Start address 4
=>  Transfer rate: 907464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxspin01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1478/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1474 W:0    | mipstx39/jmr3904: psxstack01.exe
Result: invalid   
Time: 0:00:00.262562 psxstack01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxstack01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxstack01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x153a8 lma 0
=>  Loading section .init, size 0x40 lma 153a8
=>  Loading section .fini, size 0x20 lma 153e8
=>  Loading section .rodata, size 0x2108 lma 15408
=>  Loading section .eh_frame_hdr, size 0xd8c lma 17510
=>  Loading section .eh_frame, size 0x45b0 lma 1829c
=>  Loading section .ctors, size 0x8 lma 1c84c
=>  Loading section .dtors, size 0x8 lma 1c854
=>  Loading section .got2, size 0x2c lma 1c85c
=>  Loading section .rtemsroset, size 0x70 lma 1c888
=>  Loading section .data, size 0x370 lma 1c8f8
=>  Loading section .sdata, size 0xbd lma 1cc68
=>  Start address 4
=>  Transfer rate: 944424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxstack01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1479/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1474 W:0    | mipstx39/jmr3904: psxstack02.exe
Result: invalid   
Time: 0:00:00.267674 psxstack02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxstack02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxstack02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15368 lma 0
=>  Loading section .init, size 0x40 lma 15368
=>  Loading section .fini, size 0x20 lma 153a8
=>  Loading section .rodata, size 0x2108 lma 153c8
=>  Loading section .eh_frame_hdr, size 0xd8c lma 174d0
=>  Loading section .eh_frame, size 0x45b0 lma 1825c
=>  Loading section .ctors, size 0x8 lma 1c80c
=>  Loading section .dtors, size 0x8 lma 1c814
=>  Loading section .got2, size 0x2c lma 1c81c
=>  Loading section .rtemsroset, size 0x70 lma 1c848
=>  Loading section .data, size 0x370 lma 1c8b8
=>  Loading section .sdata, size 0xbd lma 1cc28
=>  Start address 4
=>  Transfer rate: 943912 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxstack02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1480/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1474 W:0    | mipstx39/jmr3904: psxstat.exe
Result: invalid   
Time: 0:00:00.257047 psxstat.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxstat.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxstat.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x24d7c lma 0
=>  Loading section .init, size 0x40 lma 24d7c
=>  Loading section .fini, size 0x20 lma 24dbc
=>  Loading section .rodata, size 0x45e7 lma 24de0
=>  Loading section .eh_frame_hdr, size 0x110c lma 293c8
=>  Loading section .eh_frame, size 0x5f18 lma 2a4d4
=>  Loading section .tdata, size 0xc lma 303ec
=>  Loading section .ctors, size 0x8 lma 303f8
=>  Loading section .dtors, size 0x8 lma 30400
=>  Loading section .got2, size 0x2c lma 30408
=>  Loading section .rtemsroset, size 0x70 lma 30434
=>  Loading section .data, size 0x6bc lma 304a8
=>  Loading section .sdata, size 0xd0 lma 30b68
=>  Start address 4
=>  Transfer rate: 1597784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxstat.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1481/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1474 W:0    | mipstx39/jmr3904: psxstrsignal01.exe
Result: invalid   
Time: 0:00:00.257883 psxstrsignal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxstrsignal01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxstrsignal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16b70 lma 0
=>  Loading section .init, size 0x40 lma 16b70
=>  Loading section .fini, size 0x20 lma 16bb0
=>  Loading section .rodata, size 0x25d5 lma 16bd0
=>  Loading section .eh_frame_hdr, size 0xd94 lma 191a8
=>  Loading section .eh_frame, size 0x4710 lma 19f3c
=>  Loading section .ctors, size 0x8 lma 1e64c
=>  Loading section .dtors, size 0x8 lma 1e654
=>  Loading section .got2, size 0x2c lma 1e65c
=>  Loading section .rtemsroset, size 0x70 lma 1e688
=>  Loading section .data, size 0x5c4 lma 1e6f8
=>  Loading section .sdata, size 0xbd lma 1ecc0
=>  Start address 4
=>  Transfer rate: 1010608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxstrsignal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1482/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1474 W:0    | mipstx39/jmr3904: psxsysconf.exe
Result: invalid   
Time: 0:00:00.510249 psxsysconf.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxsysconf.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxsysconf.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14f3c lma 0
=>  Loading section .init, size 0x40 lma 14f3c
=>  Loading section .fini, size 0x20 lma 14f7c
=>  Loading section .rodata, size 0x2b94 lma 14fa0
=>  Loading section .eh_frame_hdr, size 0xd4c lma 17b34
=>  Loading section .eh_frame, size 0x4424 lma 18880
=>  Loading section .ctors, size 0x8 lma 1cca4
=>  Loading section .dtors, size 0x8 lma 1ccac
=>  Loading section .got2, size 0x2c lma 1ccb4
=>  Loading section .rtemsroset, size 0x70 lma 1cce0
=>  Loading section .data, size 0x364 lma 1cd50
=>  Loading section .sdata, size 0xbd lma 1d0b8
=>  Start address 4
=>  Transfer rate: 953192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsysconf.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1483/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1474 W:0    | mipstx39/jmr3904: psxthreadname01.exe
Result: invalid   
Time: 0:00:00.254507 psxthreadname01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxthreadname01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxthreadname01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14198 lma 0
=>  Loading section .init, size 0x40 lma 14198
=>  Loading section .fini, size 0x20 lma 141d8
=>  Loading section .rodata, size 0x2094 lma 141f8
=>  Loading section .eh_frame_hdr, size 0xc8c lma 1628c
=>  Loading section .eh_frame, size 0x4144 lma 16f18
=>  Loading section .ctors, size 0x8 lma 1b05c
=>  Loading section .dtors, size 0x8 lma 1b064
=>  Loading section .got2, size 0x2c lma 1b06c
=>  Loading section .rtemsroset, size 0x70 lma 1b098
=>  Loading section .data, size 0x364 lma 1b108
=>  Loading section .sdata, size 0xb1 lma 1b470
=>  Start address 4
=>  Transfer rate: 895208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxthreadname01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1484/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1475 W:0    | mipstx39/jmr3904: psxtime.exe
Result: invalid   
Time: 0:00:00.503320 psxtime.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxtime.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxtime.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1badc lma 0
=>  Loading section .init, size 0x40 lma 1badc
=>  Loading section .fini, size 0x20 lma 1bb1c
=>  Loading section .rodata, size 0x296a lma 1bb40
=>  Loading section .eh_frame_hdr, size 0xeac lma 1e4ac
=>  Loading section .eh_frame, size 0x4e14 lma 1f358
=>  Loading section .ctors, size 0x8 lma 2416c
=>  Loading section .dtors, size 0x8 lma 24174
=>  Loading section .got2, size 0x2c lma 2417c
=>  Loading section .rtemsroset, size 0x74 lma 241a8
=>  Loading section .data, size 0x634 lma 24220
=>  Loading section .sdata, size 0xd8 lma 24858
=>  Start address 4
=>  Transfer rate: 1198352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtime.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1485/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1480 W:0    | mipstx39/jmr3904: psxtimer01.exe
Result: invalid   
Time: 0:00:00.256515 psxtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxtimer01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x270f8 lma 0
=>  Loading section .init, size 0x40 lma 270f8
=>  Loading section .fini, size 0x20 lma 27138
=>  Loading section .rodata, size 0x39b2 lma 27158
=>  Loading section .eh_frame_hdr, size 0x12ec lma 2ab0c
=>  Loading section .eh_frame, size 0x6a5c lma 2bdf8
=>  Loading section .tdata, size 0xc lma 32854
=>  Loading section .ctors, size 0x8 lma 32860
=>  Loading section .dtors, size 0x8 lma 32868
=>  Loading section .got2, size 0x2c lma 32870
=>  Loading section .rtemsroset, size 0x78 lma 3289c
=>  Loading section .data, size 0x580 lma 32918
=>  Loading section .sdata, size 0xd8 lma 32e98
=>  Start address 4
=>  Transfer rate: 1669968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1486/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1480 W:0    | mipstx39/jmr3904: psxtimer02.exe
Result: invalid   
Time: 0:00:00.274617 psxtimer02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxtimer02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxtimer02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x176f4 lma 0
=>  Loading section .init, size 0x40 lma 176f4
=>  Loading section .fini, size 0x20 lma 17734
=>  Loading section .rodata, size 0x2fd0 lma 17758
=>  Loading section .eh_frame_hdr, size 0xe1c lma 1a728
=>  Loading section .eh_frame, size 0x4974 lma 1b544
=>  Loading section .ctors, size 0x8 lma 1feb8
=>  Loading section .dtors, size 0x8 lma 1fec0
=>  Loading section .got2, size 0x2c lma 1fec8
=>  Loading section .rtemsroset, size 0x78 lma 1fef4
=>  Loading section .data, size 0x394 lma 1ff70
=>  Loading section .sdata, size 0xc1 lma 20308
=>  Start address 4
=>  Transfer rate: 1056232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimer02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1487/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1480 W:0    | mipstx39/jmr3904: psxtimer_face01.exe
Result: invalid   
Time: 0:00:00.534031 psxtimer_face01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxtimer_face01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxtimer_face01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16074 lma 0
=>  Loading section .init, size 0x40 lma 16074
=>  Loading section .fini, size 0x20 lma 160b4
=>  Loading section .rodata, size 0x2cd8 lma 160d8
=>  Loading section .eh_frame_hdr, size 0xdd4 lma 18db0
=>  Loading section .eh_frame, size 0x47a8 lma 19b84
=>  Loading section .ctors, size 0x8 lma 1e32c
=>  Loading section .dtors, size 0x8 lma 1e334
=>  Loading section .got2, size 0x2c lma 1e33c
=>  Loading section .rtemsroset, size 0x78 lma 1e368
=>  Loading section .data, size 0x394 lma 1e3e0
=>  Loading section .sdata, size 0xc1 lma 1e778
=>  Start address 4
=>  Transfer rate: 999816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimer_face01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1488/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1480 W:0    | mipstx39/jmr3904: psxtimes01.exe
Result: invalid   
Time: 0:00:00.511607 psxtimes01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxtimes01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxtimes01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14188 lma 0
=>  Loading section .init, size 0x40 lma 14188
=>  Loading section .fini, size 0x20 lma 141c8
=>  Loading section .rodata, size 0x20fc lma 141e8
=>  Loading section .eh_frame_hdr, size 0xcac lma 162e4
=>  Loading section .eh_frame, size 0x41c8 lma 16f90
=>  Loading section .ctors, size 0x8 lma 1b158
=>  Loading section .dtors, size 0x8 lma 1b160
=>  Loading section .got2, size 0x2c lma 1b168
=>  Loading section .rtemsroset, size 0x70 lma 1b194
=>  Loading section .data, size 0x368 lma 1b208
=>  Loading section .sdata, size 0xa9 lma 1b570
=>  Start address 4
=>  Transfer rate: 897192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxtimes01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1489/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1480 W:0    | mipstx39/jmr3904: psxualarm.exe
Result: invalid   
Time: 0:00:00.506084 psxualarm.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxualarm.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxualarm.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bcb8 lma 0
=>  Loading section .init, size 0x40 lma 1bcb8
=>  Loading section .fini, size 0x20 lma 1bcf8
=>  Loading section .rodata, size 0x279a lma 1bd18
=>  Loading section .eh_frame_hdr, size 0xfcc lma 1e4b4
=>  Loading section .eh_frame, size 0x52c8 lma 1f480
=>  Loading section .ctors, size 0x8 lma 24748
=>  Loading section .dtors, size 0x8 lma 24750
=>  Loading section .got2, size 0x2c lma 24758
=>  Loading section .rtemsroset, size 0x74 lma 24784
=>  Loading section .data, size 0x590 lma 247f8
=>  Loading section .sdata, size 0xd4 lma 24d88
=>  Start address 4
=>  Transfer rate: 1209040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxualarm.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1490/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1480 W:0    | mipstx39/jmr3904: psxusleep.exe
Result: invalid   
Time: 0:00:00.251613 psxusleep.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxusleep.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxusleep.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bfd4 lma 0
=>  Loading section .init, size 0x40 lma 1bfd4
=>  Loading section .fini, size 0x20 lma 1c014
=>  Loading section .rodata, size 0x26ee lma 1c038
=>  Loading section .eh_frame_hdr, size 0xee4 lma 1e728
=>  Loading section .eh_frame, size 0x4f10 lma 1f60c
=>  Loading section .ctors, size 0x8 lma 2451c
=>  Loading section .dtors, size 0x8 lma 24524
=>  Loading section .got2, size 0x2c lma 2452c
=>  Loading section .rtemsroset, size 0x70 lma 24558
=>  Loading section .data, size 0x560 lma 245c8
=>  Loading section .sdata, size 0xb8 lma 24b28
=>  Start address 4
=>  Transfer rate: 1203920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxusleep.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1491/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1485 W:0    | mipstx39/jmr3904: psxtmbarrier01.exe
Result: invalid   
Time: 0:00:00.526192 psxtmbarrier01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b80 lma 0
=>  Loading section .init, size 0x40 lma 13b80
=>  Loading section .fini, size 0x20 lma 13bc0
=>  Loading section .rodata, size 0x205c lma 13be0
=>  Loading section .eh_frame_hdr, size 0xca4 lma 15c3c
=>  Loading section .eh_frame, size 0x4114 lma 168e0
=>  Loading section .ctors, size 0x8 lma 1a9f4
=>  Loading section .dtors, size 0x8 lma 1a9fc
=>  Loading section .got2, size 0x2c lma 1aa04
=>  Loading section .rtemsroset, size 0x6c lma 1aa30
=>  Loading section .data, size 0x34c lma 1aaa0
=>  Loading section .sdata, size 0xa9 lma 1adec
=>  Start address 4
=>  Transfer rate: 881800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1492/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1485 W:0    | mipstx39/jmr3904: psxtmbarrier02.exe
Result: invalid   
Time: 0:00:00.255646 psxtmbarrier02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ea0 lma 0
=>  Loading section .init, size 0x40 lma 13ea0
=>  Loading section .fini, size 0x20 lma 13ee0
=>  Loading section .rodata, size 0x2060 lma 13f00
=>  Loading section .eh_frame_hdr, size 0xce4 lma 15f60
=>  Loading section .eh_frame, size 0x41e8 lma 16c44
=>  Loading section .ctors, size 0x8 lma 1ae2c
=>  Loading section .dtors, size 0x8 lma 1ae34
=>  Loading section .got2, size 0x2c lma 1ae3c
=>  Loading section .rtemsroset, size 0x6c lma 1ae68
=>  Loading section .data, size 0x348 lma 1aed8
=>  Loading section .sdata, size 0xa9 lma 1b220
=>  Start address 4
=>  Transfer rate: 890408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1493/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1485 W:0    | mipstx39/jmr3904: psxtmbarrier03.exe
Result: invalid   
Time: 0:00:00.539777 psxtmbarrier03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13dc0 lma 0
=>  Loading section .init, size 0x40 lma 13dc0
=>  Loading section .fini, size 0x20 lma 13e00
=>  Loading section .rodata, size 0x2088 lma 13e20
=>  Loading section .eh_frame_hdr, size 0xcd4 lma 15ea8
=>  Loading section .eh_frame, size 0x41b4 lma 16b7c
=>  Loading section .ctors, size 0x8 lma 1ad30
=>  Loading section .dtors, size 0x8 lma 1ad38
=>  Loading section .got2, size 0x2c lma 1ad40
=>  Loading section .rtemsroset, size 0x6c lma 1ad6c
=>  Loading section .data, size 0x348 lma 1add8
=>  Loading section .sdata, size 0xa9 lma 1b120
=>  Start address 4
=>  Transfer rate: 888392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1494/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1485 W:0    | mipstx39/jmr3904: psxtmbarrier04.exe
Result: invalid   
Time: 0:00:00.263521 psxtmbarrier04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14180 lma 0
=>  Loading section .init, size 0x40 lma 14180
=>  Loading section .fini, size 0x20 lma 141c0
=>  Loading section .rodata, size 0x2058 lma 141e0
=>  Loading section .eh_frame_hdr, size 0xcec lma 16238
=>  Loading section .eh_frame, size 0x42c4 lma 16f24
=>  Loading section .ctors, size 0x8 lma 1b1e8
=>  Loading section .dtors, size 0x8 lma 1b1f0
=>  Loading section .got2, size 0x2c lma 1b1f8
=>  Loading section .rtemsroset, size 0x6c lma 1b224
=>  Loading section .data, size 0x348 lma 1b290
=>  Loading section .sdata, size 0xa9 lma 1b5d8
=>  Start address 4
=>  Transfer rate: 898056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrier04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1495/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1488 W:0    | mipstx39/jmr3904: psxtmbarrierattr01.exe
Result: invalid   
Time: 0:00:00.302329 psxtmbarrierattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrierattr01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrierattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13c00 lma 0
=>  Loading section .init, size 0x40 lma 13c00
=>  Loading section .fini, size 0x20 lma 13c40
=>  Loading section .rodata, size 0x20ec lma 13c60
=>  Loading section .eh_frame_hdr, size 0xcac lma 15d4c
=>  Loading section .eh_frame, size 0x4128 lma 169f8
=>  Loading section .ctors, size 0x8 lma 1ab20
=>  Loading section .dtors, size 0x8 lma 1ab28
=>  Loading section .got2, size 0x2c lma 1ab30
=>  Loading section .rtemsroset, size 0x6c lma 1ab5c
=>  Loading section .data, size 0x34c lma 1abc8
=>  Loading section .sdata, size 0xa9 lma 1af14
=>  Start address 4
=>  Transfer rate: 884200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmbarrierattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1496/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1489 W:0    | mipstx39/jmr3904: psxtmcleanup01.exe
Result: invalid   
Time: 0:00:00.537109 psxtmcleanup01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcleanup01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcleanup01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13bc0 lma 0
=>  Loading section .init, size 0x40 lma 13bc0
=>  Loading section .fini, size 0x20 lma 13c00
=>  Loading section .rodata, size 0x205c lma 13c20
=>  Loading section .eh_frame_hdr, size 0xcbc lma 15c7c
=>  Loading section .eh_frame, size 0x418c lma 16938
=>  Loading section .ctors, size 0x8 lma 1aac4
=>  Loading section .dtors, size 0x8 lma 1aacc
=>  Loading section .got2, size 0x2c lma 1aad4
=>  Loading section .rtemsroset, size 0x70 lma 1ab00
=>  Loading section .data, size 0x384 lma 1ab70
=>  Loading section .sdata, size 0xad lma 1aef4
=>  Start address 4
=>  Transfer rate: 883976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcleanup01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1497/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1490 W:0    | mipstx39/jmr3904: psxtmclocknanosleep01.exe
Result: invalid   
Time: 0:00:00.527915 psxtmclocknanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmclocknanosleep01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmclocknanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14360 lma 0
=>  Loading section .init, size 0x40 lma 14360
=>  Loading section .fini, size 0x20 lma 143a0
=>  Loading section .rodata, size 0x2004 lma 143c0
=>  Loading section .eh_frame_hdr, size 0xcec lma 163c4
=>  Loading section .eh_frame, size 0x42b4 lma 170b0
=>  Loading section .ctors, size 0x8 lma 1b364
=>  Loading section .dtors, size 0x8 lma 1b36c
=>  Loading section .got2, size 0x2c lma 1b374
=>  Loading section .rtemsroset, size 0x6c lma 1b3a0
=>  Loading section .data, size 0x354 lma 1b410
=>  Loading section .sdata, size 0xa9 lma 1b764
=>  Start address 4
=>  Transfer rate: 901192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmclocknanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1498/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1490 W:0    | mipstx39/jmr3904: psxtmclocknanosleep02.exe
Result: invalid   
Time: 0:00:00.511881 psxtmclocknanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmclocknanosleep02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmclocknanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144a0 lma 0
=>  Loading section .init, size 0x40 lma 144a0
=>  Loading section .fini, size 0x20 lma 144e0
=>  Loading section .rodata, size 0x2060 lma 14500
=>  Loading section .eh_frame_hdr, size 0xcfc lma 16560
=>  Loading section .eh_frame, size 0x42f4 lma 1725c
=>  Loading section .ctors, size 0x8 lma 1b550
=>  Loading section .dtors, size 0x8 lma 1b558
=>  Loading section .got2, size 0x2c lma 1b560
=>  Loading section .rtemsroset, size 0x6c lma 1b58c
=>  Loading section .data, size 0x358 lma 1b5f8
=>  Loading section .sdata, size 0xa9 lma 1b950
=>  Start address 4
=>  Transfer rate: 905160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmclocknanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1499/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1490 W:0    | mipstx39/jmr3904: psxtmclocknanosleep03.exe
Result: invalid   
Time: 0:00:00.252620 psxtmclocknanosleep03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmclocknanosleep03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmclocknanosleep03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144a0 lma 0
=>  Loading section .init, size 0x40 lma 144a0
=>  Loading section .fini, size 0x20 lma 144e0
=>  Loading section .rodata, size 0x2060 lma 14500
=>  Loading section .eh_frame_hdr, size 0xcfc lma 16560
=>  Loading section .eh_frame, size 0x42f4 lma 1725c
=>  Loading section .ctors, size 0x8 lma 1b550
=>  Loading section .dtors, size 0x8 lma 1b558
=>  Loading section .got2, size 0x2c lma 1b560
=>  Loading section .rtemsroset, size 0x6c lma 1b58c
=>  Loading section .data, size 0x358 lma 1b5f8
=>  Loading section .sdata, size 0xa9 lma 1b950
=>  Start address 4
=>  Transfer rate: 905160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmclocknanosleep03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1500/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1492 W:0    | mipstx39/jmr3904: psxtmcond01.exe
Result: invalid   
Time: 0:00:00.259419 psxtmcond01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13c80 lma 0
=>  Loading section .init, size 0x40 lma 13c80
=>  Loading section .fini, size 0x20 lma 13cc0
=>  Loading section .rodata, size 0x2074 lma 13ce0
=>  Loading section .eh_frame_hdr, size 0xcb4 lma 15d54
=>  Loading section .eh_frame, size 0x4190 lma 16a08
=>  Loading section .ctors, size 0x8 lma 1ab98
=>  Loading section .dtors, size 0x8 lma 1aba0
=>  Loading section .got2, size 0x2c lma 1aba8
=>  Loading section .rtemsroset, size 0x6c lma 1abd4
=>  Loading section .data, size 0x34c lma 1ac40
=>  Loading section .sdata, size 0xa9 lma 1af8c
=>  Start address 4
=>  Transfer rate: 885160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1501/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1493 W:0    | mipstx39/jmr3904: psxtmcond02.exe
Result: invalid   
Time: 0:00:00.264773 psxtmcond02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ee0 lma 0
=>  Loading section .init, size 0x40 lma 13ee0
=>  Loading section .fini, size 0x20 lma 13f20
=>  Loading section .rodata, size 0x206c lma 13f40
=>  Loading section .eh_frame_hdr, size 0xce4 lma 15fac
=>  Loading section .eh_frame, size 0x425c lma 16c90
=>  Loading section .ctors, size 0x8 lma 1aeec
=>  Loading section .dtors, size 0x8 lma 1aef4
=>  Loading section .got2, size 0x2c lma 1aefc
=>  Loading section .rtemsroset, size 0x6c lma 1af28
=>  Loading section .data, size 0x34c lma 1af98
=>  Loading section .sdata, size 0xa9 lma 1b2e4
=>  Start address 4
=>  Transfer rate: 891976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1502/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1498 W:0    | mipstx39/jmr3904: psxtmcond03.exe
Result: invalid   
Time: 0:00:00.253730 psxtmcond03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15820 lma 0
=>  Loading section .init, size 0x40 lma 15820
=>  Loading section .fini, size 0x20 lma 15860
=>  Loading section .rodata, size 0x20a8 lma 15880
=>  Loading section .eh_frame_hdr, size 0xdac lma 17928
=>  Loading section .eh_frame, size 0x4830 lma 186d4
=>  Loading section .ctors, size 0x8 lma 1cf04
=>  Loading section .dtors, size 0x8 lma 1cf0c
=>  Loading section .got2, size 0x2c lma 1cf14
=>  Loading section .rtemsroset, size 0x6c lma 1cf40
=>  Loading section .data, size 0x348 lma 1cfb0
=>  Loading section .sdata, size 0xa9 lma 1d2f8
=>  Start address 4
=>  Transfer rate: 957672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1503/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1498 W:0    | mipstx39/jmr3904: psxtmcond04.exe
Result: invalid   
Time: 0:00:00.547424 psxtmcond04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x157e0 lma 0
=>  Loading section .init, size 0x40 lma 157e0
=>  Loading section .fini, size 0x20 lma 15820
=>  Loading section .rodata, size 0x20a0 lma 15840
=>  Loading section .eh_frame_hdr, size 0xdac lma 178e0
=>  Loading section .eh_frame, size 0x482c lma 1868c
=>  Loading section .ctors, size 0x8 lma 1ceb8
=>  Loading section .dtors, size 0x8 lma 1cec0
=>  Loading section .got2, size 0x2c lma 1cec8
=>  Loading section .rtemsroset, size 0x6c lma 1cef4
=>  Loading section .data, size 0x348 lma 1cf60
=>  Loading section .sdata, size 0xa9 lma 1d2a8
=>  Start address 4
=>  Transfer rate: 957064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1504/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1497 W:0    | mipstx39/jmr3904: psxtmcond05.exe
Result: invalid   
Time: 0:00:00.272300 psxtmcond05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ee0 lma 0
=>  Loading section .init, size 0x40 lma 13ee0
=>  Loading section .fini, size 0x20 lma 13f20
=>  Loading section .rodata, size 0x2074 lma 13f40
=>  Loading section .eh_frame_hdr, size 0xce4 lma 15fb4
=>  Loading section .eh_frame, size 0x425c lma 16c98
=>  Loading section .ctors, size 0x8 lma 1aef4
=>  Loading section .dtors, size 0x8 lma 1aefc
=>  Loading section .got2, size 0x2c lma 1af04
=>  Loading section .rtemsroset, size 0x6c lma 1af30
=>  Loading section .data, size 0x34c lma 1afa0
=>  Loading section .sdata, size 0xa9 lma 1b2ec
=>  Start address 4
=>  Transfer rate: 892040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1505/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1498 W:0    | mipstx39/jmr3904: psxtmcond06.exe
Result: invalid   
Time: 0:00:00.530168 psxtmcond06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15a00 lma 0
=>  Loading section .init, size 0x40 lma 15a00
=>  Loading section .fini, size 0x20 lma 15a40
=>  Loading section .rodata, size 0x20b0 lma 15a60
=>  Loading section .eh_frame_hdr, size 0xdb4 lma 17b10
=>  Loading section .eh_frame, size 0x4860 lma 188c4
=>  Loading section .ctors, size 0x8 lma 1d124
=>  Loading section .dtors, size 0x8 lma 1d12c
=>  Loading section .got2, size 0x2c lma 1d134
=>  Loading section .rtemsroset, size 0x6c lma 1d160
=>  Loading section .data, size 0x348 lma 1d1d0
=>  Loading section .sdata, size 0xa9 lma 1d518
=>  Start address 4
=>  Transfer rate: 962024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1506/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1501 W:0    | mipstx39/jmr3904: psxtmcond07.exe
Result: invalid   
Time: 0:00:00.509437 psxtmcond07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15560 lma 0
=>  Loading section .init, size 0x40 lma 15560
=>  Loading section .fini, size 0x20 lma 155a0
=>  Loading section .rodata, size 0x20b0 lma 155c0
=>  Loading section .eh_frame_hdr, size 0xda4 lma 17670
=>  Loading section .eh_frame, size 0x4740 lma 18414
=>  Loading section .ctors, size 0x8 lma 1cb54
=>  Loading section .dtors, size 0x8 lma 1cb5c
=>  Loading section .got2, size 0x2c lma 1cb64
=>  Loading section .rtemsroset, size 0x6c lma 1cb90
=>  Loading section .data, size 0x348 lma 1cc00
=>  Loading section .sdata, size 0xa9 lma 1cf48
=>  Start address 4
=>  Transfer rate: 950120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1507/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1501 W:0    | mipstx39/jmr3904: psxtmcond08.exe
Result: invalid   
Time: 0:00:00.545282 psxtmcond08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x152bc lma 0
=>  Loading section .init, size 0x40 lma 152bc
=>  Loading section .fini, size 0x20 lma 152fc
=>  Loading section .rodata, size 0x20a0 lma 15320
=>  Loading section .eh_frame_hdr, size 0xd7c lma 173c0
=>  Loading section .eh_frame, size 0x4668 lma 1813c
=>  Loading section .ctors, size 0x8 lma 1c7a4
=>  Loading section .dtors, size 0x8 lma 1c7ac
=>  Loading section .got2, size 0x2c lma 1c7b4
=>  Loading section .rtemsroset, size 0x6c lma 1c7e0
=>  Loading section .data, size 0x348 lma 1c850
=>  Loading section .sdata, size 0xa9 lma 1cb98
=>  Start address 4
=>  Transfer rate: 942536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1508/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1501 W:0    | mipstx39/jmr3904: psxtmcond09.exe
Result: invalid   
Time: 0:00:00.521096 psxtmcond09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond09.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x152fc lma 0
=>  Loading section .init, size 0x40 lma 152fc
=>  Loading section .fini, size 0x20 lma 1533c
=>  Loading section .rodata, size 0x20b0 lma 15360
=>  Loading section .eh_frame_hdr, size 0xd7c lma 17410
=>  Loading section .eh_frame, size 0x4668 lma 1818c
=>  Loading section .ctors, size 0x8 lma 1c7f4
=>  Loading section .dtors, size 0x8 lma 1c7fc
=>  Loading section .got2, size 0x2c lma 1c804
=>  Loading section .rtemsroset, size 0x6c lma 1c830
=>  Loading section .data, size 0x348 lma 1c8a0
=>  Loading section .sdata, size 0xa9 lma 1cbe8
=>  Start address 4
=>  Transfer rate: 943176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond09.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1509/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1501 W:0    | mipstx39/jmr3904: psxtmcond10.exe
Result: invalid   
Time: 0:00:00.514635 psxtmcond10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond10.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1533c lma 0
=>  Loading section .init, size 0x40 lma 1533c
=>  Loading section .fini, size 0x20 lma 1537c
=>  Loading section .rodata, size 0x20c8 lma 153a0
=>  Loading section .eh_frame_hdr, size 0xd84 lma 17468
=>  Loading section .eh_frame, size 0x4690 lma 181ec
=>  Loading section .ctors, size 0x8 lma 1c87c
=>  Loading section .dtors, size 0x8 lma 1c884
=>  Loading section .got2, size 0x2c lma 1c88c
=>  Loading section .rtemsroset, size 0x6c lma 1c8b8
=>  Loading section .data, size 0x348 lma 1c928
=>  Loading section .sdata, size 0xa9 lma 1cc70
=>  Start address 4
=>  Transfer rate: 944264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmcond10.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1510/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1501 W:0    | mipstx39/jmr3904: psxtmkey01.exe
Result: invalid   
Time: 0:00:00.264303 psxtmkey01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmkey01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmkey01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13e20 lma 0
=>  Loading section .init, size 0x40 lma 13e20
=>  Loading section .fini, size 0x20 lma 13e60
=>  Loading section .rodata, size 0x2054 lma 13e80
=>  Loading section .eh_frame_hdr, size 0xccc lma 15ed4
=>  Loading section .eh_frame, size 0x4214 lma 16ba0
=>  Loading section .ctors, size 0x8 lma 1adb4
=>  Loading section .dtors, size 0x8 lma 1adbc
=>  Loading section .got2, size 0x2c lma 1adc4
=>  Loading section .rtemsroset, size 0x70 lma 1adf0
=>  Loading section .data, size 0x3b0 lma 1ae60
=>  Loading section .sdata, size 0xad lma 1b210
=>  Start address 4
=>  Transfer rate: 890344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmkey01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1511/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1501 W:0    | mipstx39/jmr3904: psxtmkey02.exe
Result: invalid   
Time: 0:00:00.275483 psxtmkey02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmkey02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmkey02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x142c0 lma 0
=>  Loading section .init, size 0x40 lma 142c0
=>  Loading section .fini, size 0x20 lma 14300
=>  Loading section .rodata, size 0x2074 lma 14320
=>  Loading section .eh_frame_hdr, size 0xcfc lma 16394
=>  Loading section .eh_frame, size 0x4324 lma 17090
=>  Loading section .ctors, size 0x8 lma 1b3b4
=>  Loading section .dtors, size 0x8 lma 1b3bc
=>  Loading section .got2, size 0x2c lma 1b3c4
=>  Loading section .rtemsroset, size 0x70 lma 1b3f0
=>  Loading section .data, size 0x3b0 lma 1b460
=>  Loading section .sdata, size 0xad lma 1b810
=>  Start address 4
=>  Transfer rate: 902632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmkey02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1512/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1504 W:0    | mipstx39/jmr3904: psxtmmq01.exe
Result: invalid   
Time: 0:00:00.259889 psxtmmq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmq01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1682c lma 0
=>  Loading section .init, size 0x40 lma 1682c
=>  Loading section .fini, size 0x20 lma 1686c
=>  Loading section .rodata, size 0x2324 lma 16890
=>  Loading section .eh_frame_hdr, size 0xe64 lma 18bb4
=>  Loading section .eh_frame, size 0x4b54 lma 19a18
=>  Loading section .ctors, size 0x8 lma 1e56c
=>  Loading section .dtors, size 0x8 lma 1e574
=>  Loading section .got2, size 0x2c lma 1e57c
=>  Loading section .rtemsroset, size 0x74 lma 1e5a8
=>  Loading section .data, size 0x384 lma 1e620
=>  Loading section .sdata, size 0xb1 lma 1e9a4
=>  Start address 4
=>  Transfer rate: 1004136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmq01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1513/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1508 W:0    | mipstx39/jmr3904: psxtmmqrcvblock01.exe
Result: invalid   
Time: 0:00:00.262483 psxtmmqrcvblock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmqrcvblock01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmqrcvblock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14bb4 lma 0
=>  Loading section .init, size 0x40 lma 14bb4
=>  Loading section .fini, size 0x20 lma 14bf4
=>  Loading section .rodata, size 0x2090 lma 14c18
=>  Loading section .eh_frame_hdr, size 0xd5c lma 16ca8
=>  Loading section .eh_frame, size 0x453c lma 17a04
=>  Loading section .ctors, size 0x8 lma 1bf40
=>  Loading section .dtors, size 0x8 lma 1bf48
=>  Loading section .got2, size 0x2c lma 1bf50
=>  Loading section .rtemsroset, size 0x70 lma 1bf7c
=>  Loading section .data, size 0x378 lma 1bff0
=>  Loading section .sdata, size 0xad lma 1c368
=>  Start address 4
=>  Transfer rate: 925800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmqrcvblock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1514/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1505 W:0    | mipstx39/jmr3904: psxtmmqrcvblock02.exe
Result: invalid   
Time: 0:00:00.520298 psxtmmqrcvblock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmqrcvblock02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmqrcvblock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18894 lma 0
=>  Loading section .init, size 0x40 lma 18894
=>  Loading section .fini, size 0x20 lma 188d4
=>  Loading section .rodata, size 0x2219 lma 188f8
=>  Loading section .eh_frame_hdr, size 0xf4c lma 1ab14
=>  Loading section .eh_frame, size 0x51f0 lma 1ba60
=>  Loading section .ctors, size 0x8 lma 20c50
=>  Loading section .dtors, size 0x8 lma 20c58
=>  Loading section .got2, size 0x2c lma 20c60
=>  Loading section .rtemsroset, size 0x74 lma 20c8c
=>  Loading section .data, size 0x3d8 lma 20d00
=>  Loading section .sdata, size 0xb9 lma 210d8
=>  Start address 4
=>  Transfer rate: 1084496 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmqrcvblock02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1515/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1510 W:0    | mipstx39/jmr3904: psxtmmutex01.exe
Result: invalid   
Time: 0:00:00.251383 psxtmmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13cc0 lma 0
=>  Loading section .init, size 0x40 lma 13cc0
=>  Loading section .fini, size 0x20 lma 13d00
=>  Loading section .rodata, size 0x2074 lma 13d20
=>  Loading section .eh_frame_hdr, size 0xca4 lma 15d94
=>  Loading section .eh_frame, size 0x4158 lma 16a38
=>  Loading section .ctors, size 0x8 lma 1ab90
=>  Loading section .dtors, size 0x8 lma 1ab98
=>  Loading section .got2, size 0x2c lma 1aba0
=>  Loading section .rtemsroset, size 0x6c lma 1abcc
=>  Loading section .data, size 0x34c lma 1ac38
=>  Loading section .sdata, size 0xa9 lma 1af84
=>  Start address 4
=>  Transfer rate: 885096 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1516/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1511 W:0    | mipstx39/jmr3904: psxtmmutex02.exe
Result: invalid   
Time: 0:00:00.526438 psxtmmutex02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14540 lma 0
=>  Loading section .init, size 0x40 lma 14540
=>  Loading section .fini, size 0x20 lma 14580
=>  Loading section .rodata, size 0x2080 lma 145a0
=>  Loading section .eh_frame_hdr, size 0xd0c lma 16620
=>  Loading section .eh_frame, size 0x4378 lma 1732c
=>  Loading section .ctors, size 0x8 lma 1b6a4
=>  Loading section .dtors, size 0x8 lma 1b6ac
=>  Loading section .got2, size 0x2c lma 1b6b4
=>  Loading section .rtemsroset, size 0x6c lma 1b6e0
=>  Loading section .data, size 0x348 lma 1b750
=>  Loading section .sdata, size 0xa9 lma 1ba98
=>  Start address 4
=>  Transfer rate: 907752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1517/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1511 W:0    | mipstx39/jmr3904: psxtmmutex03.exe
Result: invalid   
Time: 0:00:00.273482 psxtmmutex03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14de0 lma 0
=>  Loading section .init, size 0x40 lma 14de0
=>  Loading section .fini, size 0x20 lma 14e20
=>  Loading section .rodata, size 0x2114 lma 14e40
=>  Loading section .eh_frame_hdr, size 0xd5c lma 16f54
=>  Loading section .eh_frame, size 0x4574 lma 17cb0
=>  Loading section .ctors, size 0x8 lma 1c224
=>  Loading section .dtors, size 0x8 lma 1c22c
=>  Loading section .got2, size 0x2c lma 1c234
=>  Loading section .rtemsroset, size 0x6c lma 1c260
=>  Loading section .data, size 0x34c lma 1c2d0
=>  Loading section .sdata, size 0xa9 lma 1c61c
=>  Start address 4
=>  Transfer rate: 931336 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1518/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1511 W:0    | mipstx39/jmr3904: psxtmmutex04.exe
Result: invalid   
Time: 0:00:00.261293 psxtmmutex04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x148e0 lma 0
=>  Loading section .init, size 0x40 lma 148e0
=>  Loading section .fini, size 0x20 lma 14920
=>  Loading section .rodata, size 0x2088 lma 14940
=>  Loading section .eh_frame_hdr, size 0xd2c lma 169c8
=>  Loading section .eh_frame, size 0x4430 lma 176f4
=>  Loading section .ctors, size 0x8 lma 1bb24
=>  Loading section .dtors, size 0x8 lma 1bb2c
=>  Loading section .got2, size 0x2c lma 1bb34
=>  Loading section .rtemsroset, size 0x6c lma 1bb60
=>  Loading section .data, size 0x348 lma 1bbd0
=>  Loading section .sdata, size 0xa9 lma 1bf18
=>  Start address 4
=>  Transfer rate: 916968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1519/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1511 W:0    | mipstx39/jmr3904: psxtmmutex05.exe
Result: invalid   
Time: 0:00:00.507573 psxtmmutex05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147e0 lma 0
=>  Loading section .init, size 0x40 lma 147e0
=>  Loading section .fini, size 0x20 lma 14820
=>  Loading section .rodata, size 0x2090 lma 14840
=>  Loading section .eh_frame_hdr, size 0xd14 lma 168d0
=>  Loading section .eh_frame, size 0x43f0 lma 175e4
=>  Loading section .ctors, size 0x8 lma 1b9d4
=>  Loading section .dtors, size 0x8 lma 1b9dc
=>  Loading section .got2, size 0x2c lma 1b9e4
=>  Loading section .rtemsroset, size 0x6c lma 1ba10
=>  Loading section .data, size 0x348 lma 1ba80
=>  Loading section .sdata, size 0xa9 lma 1bdc8
=>  Start address 4
=>  Transfer rate: 914280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1520/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1511 W:0    | mipstx39/jmr3904: psxtmmutex06.exe
Result: invalid   
Time: 0:00:00.260184 psxtmmutex06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14a80 lma 0
=>  Loading section .init, size 0x40 lma 14a80
=>  Loading section .fini, size 0x20 lma 14ac0
=>  Loading section .rodata, size 0x2088 lma 14ae0
=>  Loading section .eh_frame_hdr, size 0xd24 lma 16b68
=>  Loading section .eh_frame, size 0x4434 lma 1788c
=>  Loading section .ctors, size 0x8 lma 1bcc0
=>  Loading section .dtors, size 0x8 lma 1bcc8
=>  Loading section .got2, size 0x2c lma 1bcd0
=>  Loading section .rtemsroset, size 0x6c lma 1bcfc
=>  Loading section .data, size 0x348 lma 1bd68
=>  Loading section .sdata, size 0xa9 lma 1c0b0
=>  Start address 4
=>  Transfer rate: 920264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1521/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1511 W:0    | mipstx39/jmr3904: psxtmmutex07.exe
Result: invalid   
Time: 0:00:00.263861 psxtmmutex07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ba0 lma 0
=>  Loading section .init, size 0x40 lma 14ba0
=>  Loading section .fini, size 0x20 lma 14be0
=>  Loading section .rodata, size 0x20a4 lma 14c00
=>  Loading section .eh_frame_hdr, size 0xd34 lma 16ca4
=>  Loading section .eh_frame, size 0x4520 lma 179d8
=>  Loading section .ctors, size 0x8 lma 1bef8
=>  Loading section .dtors, size 0x8 lma 1bf00
=>  Loading section .got2, size 0x2c lma 1bf08
=>  Loading section .rtemsroset, size 0x6c lma 1bf34
=>  Loading section .data, size 0x34c lma 1bfa0
=>  Loading section .sdata, size 0xa9 lma 1c2ec
=>  Start address 4
=>  Transfer rate: 924840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutex07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1522/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1514 W:0    | mipstx39/jmr3904: psxtmmutexattr01.exe
Result: invalid   
Time: 0:00:00.257167 psxtmmutexattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutexattr01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutexattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14080 lma 0
=>  Loading section .init, size 0x40 lma 14080
=>  Loading section .fini, size 0x20 lma 140c0
=>  Loading section .rodata, size 0x225c lma 140e0
=>  Loading section .eh_frame_hdr, size 0xcdc lma 1633c
=>  Loading section .eh_frame, size 0x41a4 lma 17018
=>  Loading section .ctors, size 0x8 lma 1b1bc
=>  Loading section .dtors, size 0x8 lma 1b1c4
=>  Loading section .got2, size 0x2c lma 1b1cc
=>  Loading section .rtemsroset, size 0x6c lma 1b1f8
=>  Loading section .data, size 0x34c lma 1b268
=>  Loading section .sdata, size 0xa9 lma 1b5b4
=>  Start address 4
=>  Transfer rate: 897736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutexattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1523/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1514 W:0    | mipstx39/jmr3904: psxtmnanosleep01.exe
Result: invalid   
Time: 0:00:00.252497 psxtmnanosleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmnanosleep01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmnanosleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x143a0 lma 0
=>  Loading section .init, size 0x40 lma 143a0
=>  Loading section .fini, size 0x20 lma 143e0
=>  Loading section .rodata, size 0x2004 lma 14400
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 16404
=>  Loading section .eh_frame, size 0x42d8 lma 170f8
=>  Loading section .ctors, size 0x8 lma 1b3d0
=>  Loading section .dtors, size 0x8 lma 1b3d8
=>  Loading section .got2, size 0x2c lma 1b3e0
=>  Loading section .rtemsroset, size 0x6c lma 1b40c
=>  Loading section .data, size 0x358 lma 1b478
=>  Loading section .sdata, size 0xa9 lma 1b7d0
=>  Start address 4
=>  Transfer rate: 902088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmnanosleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1524/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1517 W:0    | mipstx39/jmr3904: psxtmnanosleep02.exe
Result: invalid   
Time: 0:00:00.261650 psxtmnanosleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmnanosleep02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmnanosleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144e0 lma 0
=>  Loading section .init, size 0x40 lma 144e0
=>  Loading section .fini, size 0x20 lma 14520
=>  Loading section .rodata, size 0x2050 lma 14540
=>  Loading section .eh_frame_hdr, size 0xd04 lma 16590
=>  Loading section .eh_frame, size 0x4318 lma 17294
=>  Loading section .ctors, size 0x8 lma 1b5ac
=>  Loading section .dtors, size 0x8 lma 1b5b4
=>  Loading section .got2, size 0x2c lma 1b5bc
=>  Loading section .rtemsroset, size 0x6c lma 1b5e8
=>  Loading section .data, size 0x354 lma 1b658
=>  Loading section .sdata, size 0xa9 lma 1b9ac
=>  Start address 4
=>  Transfer rate: 905864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmnanosleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1525/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1521 W:0    | mipstx39/jmr3904: psxtmonce01.exe
Result: invalid   
Time: 0:00:00.505946 psxtmonce01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmonce01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmonce01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13e80 lma 0
=>  Loading section .init, size 0x40 lma 13e80
=>  Loading section .fini, size 0x20 lma 13ec0
=>  Loading section .rodata, size 0x204c lma 13ee0
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 15f2c
=>  Loading section .eh_frame, size 0x4238 lma 16c20
=>  Loading section .ctors, size 0x8 lma 1ae58
=>  Loading section .dtors, size 0x8 lma 1ae60
=>  Loading section .got2, size 0x2c lma 1ae68
=>  Loading section .rtemsroset, size 0x6c lma 1ae94
=>  Loading section .data, size 0x374 lma 1af00
=>  Loading section .sdata, size 0xa9 lma 1b274
=>  Start address 4
=>  Transfer rate: 891112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmonce01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1526/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1522 W:0    | mipstx39/jmr3904: psxtmrwlock01.exe
Result: invalid   
Time: 0:00:00.515082 psxtmrwlock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ba0 lma 0
=>  Loading section .init, size 0x40 lma 14ba0
=>  Loading section .fini, size 0x20 lma 14be0
=>  Loading section .rodata, size 0x21ec lma 14c00
=>  Loading section .eh_frame_hdr, size 0xd5c lma 16dec
=>  Loading section .eh_frame, size 0x450c lma 17b48
=>  Loading section .ctors, size 0x8 lma 1c054
=>  Loading section .dtors, size 0x8 lma 1c05c
=>  Loading section .got2, size 0x2c lma 1c064
=>  Loading section .rtemsroset, size 0x6c lma 1c090
=>  Loading section .data, size 0x34c lma 1c100
=>  Loading section .sdata, size 0xa9 lma 1c44c
=>  Start address 4
=>  Transfer rate: 927624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1527/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1522 W:0    | mipstx39/jmr3904: psxtmrwlock02.exe
Result: invalid   
Time: 0:00:00.259902 psxtmrwlock02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14140 lma 0
=>  Loading section .init, size 0x40 lma 14140
=>  Loading section .fini, size 0x20 lma 14180
=>  Loading section .rodata, size 0x2060 lma 141a0
=>  Loading section .eh_frame_hdr, size 0xd04 lma 16200
=>  Loading section .eh_frame, size 0x42dc lma 16f04
=>  Loading section .ctors, size 0x8 lma 1b1e0
=>  Loading section .dtors, size 0x8 lma 1b1e8
=>  Loading section .got2, size 0x2c lma 1b1f0
=>  Loading section .rtemsroset, size 0x6c lma 1b21c
=>  Loading section .data, size 0x348 lma 1b288
=>  Loading section .sdata, size 0xa9 lma 1b5d0
=>  Start address 4
=>  Transfer rate: 897992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1528/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1522 W:0    | mipstx39/jmr3904: psxtmrwlock03.exe
Result: invalid   
Time: 0:00:00.516871 psxtmrwlock03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147a0 lma 0
=>  Loading section .init, size 0x40 lma 147a0
=>  Loading section .fini, size 0x20 lma 147e0
=>  Loading section .rodata, size 0x2068 lma 14800
=>  Loading section .eh_frame_hdr, size 0xd2c lma 16868
=>  Loading section .eh_frame, size 0x4404 lma 17594
=>  Loading section .ctors, size 0x8 lma 1b998
=>  Loading section .dtors, size 0x8 lma 1b9a0
=>  Loading section .got2, size 0x2c lma 1b9a8
=>  Loading section .rtemsroset, size 0x6c lma 1b9d4
=>  Loading section .data, size 0x348 lma 1ba40
=>  Loading section .sdata, size 0xa9 lma 1bd88
=>  Start address 4
=>  Transfer rate: 913800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1529/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1522 W:0    | mipstx39/jmr3904: psxtmrwlock04.exe
Result: invalid   
Time: 0:00:00.507710 psxtmrwlock04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13fe0 lma 0
=>  Loading section .init, size 0x40 lma 13fe0
=>  Loading section .fini, size 0x20 lma 14020
=>  Loading section .rodata, size 0x2060 lma 14040
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 160a0
=>  Loading section .eh_frame, size 0x4270 lma 16d94
=>  Loading section .ctors, size 0x8 lma 1b004
=>  Loading section .dtors, size 0x8 lma 1b00c
=>  Loading section .got2, size 0x2c lma 1b014
=>  Loading section .rtemsroset, size 0x6c lma 1b040
=>  Loading section .data, size 0x348 lma 1b0b0
=>  Loading section .sdata, size 0xa9 lma 1b3f8
=>  Start address 4
=>  Transfer rate: 894184 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1530/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1522 W:0    | mipstx39/jmr3904: psxtmrwlock05.exe
Result: invalid   
Time: 0:00:00.554117 psxtmrwlock05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14620 lma 0
=>  Loading section .init, size 0x40 lma 14620
=>  Loading section .fini, size 0x20 lma 14660
=>  Loading section .rodata, size 0x2068 lma 14680
=>  Loading section .eh_frame_hdr, size 0xd1c lma 166e8
=>  Loading section .eh_frame, size 0x4390 lma 17404
=>  Loading section .ctors, size 0x8 lma 1b794
=>  Loading section .dtors, size 0x8 lma 1b79c
=>  Loading section .got2, size 0x2c lma 1b7a4
=>  Loading section .rtemsroset, size 0x6c lma 1b7d0
=>  Loading section .data, size 0x348 lma 1b840
=>  Loading section .sdata, size 0xa9 lma 1bb88
=>  Start address 4
=>  Transfer rate: 909672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1531/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1522 W:0    | mipstx39/jmr3904: psxtmrwlock06.exe
Result: invalid   
Time: 0:00:00.291473 psxtmrwlock06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14120 lma 0
=>  Loading section .init, size 0x40 lma 14120
=>  Loading section .fini, size 0x20 lma 14160
=>  Loading section .rodata, size 0x2068 lma 14180
=>  Loading section .eh_frame_hdr, size 0xd04 lma 161e8
=>  Loading section .eh_frame, size 0x42bc lma 16eec
=>  Loading section .ctors, size 0x8 lma 1b1a8
=>  Loading section .dtors, size 0x8 lma 1b1b0
=>  Loading section .got2, size 0x2c lma 1b1b8
=>  Loading section .rtemsroset, size 0x6c lma 1b1e4
=>  Loading section .data, size 0x348 lma 1b250
=>  Loading section .sdata, size 0xa9 lma 1b598
=>  Start address 4
=>  Transfer rate: 897544 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1532/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1522 W:0    | mipstx39/jmr3904: psxtmrwlock07.exe
Result: invalid   
Time: 0:00:00.322192 psxtmrwlock07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14400 lma 0
=>  Loading section .init, size 0x40 lma 14400
=>  Loading section .fini, size 0x20 lma 14440
=>  Loading section .rodata, size 0x2060 lma 14460
=>  Loading section .eh_frame_hdr, size 0xd14 lma 164c0
=>  Loading section .eh_frame, size 0x4318 lma 171d4
=>  Loading section .ctors, size 0x8 lma 1b4ec
=>  Loading section .dtors, size 0x8 lma 1b4f4
=>  Loading section .got2, size 0x2c lma 1b4fc
=>  Loading section .rtemsroset, size 0x6c lma 1b528
=>  Loading section .data, size 0x348 lma 1b598
=>  Loading section .sdata, size 0xa9 lma 1b8e0
=>  Start address 4
=>  Transfer rate: 904232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmrwlock07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1533/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1523 W:0    | mipstx39/jmr3904: psxtmsem01.exe
Result: invalid   
Time: 0:00:00.255053 psxtmsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14534 lma 0
=>  Loading section .init, size 0x40 lma 14534
=>  Loading section .fini, size 0x20 lma 14574
=>  Loading section .rodata, size 0x2114 lma 14598
=>  Loading section .eh_frame_hdr, size 0xd04 lma 166ac
=>  Loading section .eh_frame, size 0x4378 lma 173b0
=>  Loading section .ctors, size 0x8 lma 1b728
=>  Loading section .dtors, size 0x8 lma 1b730
=>  Loading section .got2, size 0x2c lma 1b738
=>  Loading section .rtemsroset, size 0x70 lma 1b764
=>  Loading section .data, size 0x378 lma 1b7d8
=>  Loading section .sdata, size 0xa9 lma 1bb50
=>  Start address 4
=>  Transfer rate: 909192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1534/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1527 W:0    | mipstx39/jmr3904: psxtmsem02.exe
Result: invalid   
Time: 0:00:00.532235 psxtmsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14380 lma 0
=>  Loading section .init, size 0x40 lma 14380
=>  Loading section .fini, size 0x20 lma 143c0
=>  Loading section .rodata, size 0x20b4 lma 143e0
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 16494
=>  Loading section .eh_frame, size 0x42a0 lma 17188
=>  Loading section .ctors, size 0x8 lma 1b428
=>  Loading section .dtors, size 0x8 lma 1b430
=>  Loading section .got2, size 0x2c lma 1b438
=>  Loading section .rtemsroset, size 0x6c lma 1b464
=>  Loading section .data, size 0x34c lma 1b4d0
=>  Loading section .sdata, size 0xa9 lma 1b81c
=>  Start address 4
=>  Transfer rate: 902696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1535/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1530 W:0    | mipstx39/jmr3904: psxtmsem03.exe
Result: invalid   
Time: 0:00:00.257887 psxtmsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14000 lma 0
=>  Loading section .init, size 0x40 lma 14000
=>  Loading section .fini, size 0x20 lma 14040
=>  Loading section .rodata, size 0x2050 lma 14060
=>  Loading section .eh_frame_hdr, size 0xcdc lma 160b0
=>  Loading section .eh_frame, size 0x4230 lma 16d8c
=>  Loading section .ctors, size 0x8 lma 1afbc
=>  Loading section .dtors, size 0x8 lma 1afc4
=>  Loading section .got2, size 0x2c lma 1afcc
=>  Loading section .rtemsroset, size 0x6c lma 1aff8
=>  Loading section .data, size 0x348 lma 1b068
=>  Loading section .sdata, size 0xa9 lma 1b3b0
=>  Start address 4
=>  Transfer rate: 893608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1536/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1530 W:0    | mipstx39/jmr3904: psxtmsem04.exe
Result: invalid   
Time: 0:00:00.252083 psxtmsem04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x141a0 lma 0
=>  Loading section .init, size 0x40 lma 141a0
=>  Loading section .fini, size 0x20 lma 141e0
=>  Loading section .rodata, size 0x2058 lma 14200
=>  Loading section .eh_frame_hdr, size 0xcec lma 16258
=>  Loading section .eh_frame, size 0x4298 lma 16f44
=>  Loading section .ctors, size 0x8 lma 1b1dc
=>  Loading section .dtors, size 0x8 lma 1b1e4
=>  Loading section .got2, size 0x2c lma 1b1ec
=>  Loading section .rtemsroset, size 0x6c lma 1b218
=>  Loading section .data, size 0x348 lma 1b288
=>  Loading section .sdata, size 0xa9 lma 1b5d0
=>  Start address 4
=>  Transfer rate: 897960 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1537/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1530 W:0    | mipstx39/jmr3904: psxtmsem05.exe
Result: invalid   
Time: 0:00:00.274081 psxtmsem05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14460 lma 0
=>  Loading section .init, size 0x40 lma 14460
=>  Loading section .fini, size 0x20 lma 144a0
=>  Loading section .rodata, size 0x2058 lma 144c0
=>  Loading section .eh_frame_hdr, size 0xcfc lma 16518
=>  Loading section .eh_frame, size 0x42f4 lma 17214
=>  Loading section .ctors, size 0x8 lma 1b508
=>  Loading section .dtors, size 0x8 lma 1b510
=>  Loading section .got2, size 0x2c lma 1b518
=>  Loading section .rtemsroset, size 0x6c lma 1b544
=>  Loading section .data, size 0x348 lma 1b5b0
=>  Loading section .sdata, size 0xa9 lma 1b8f8
=>  Start address 4
=>  Transfer rate: 904456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsem05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1538/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1531 W:0    | mipstx39/jmr3904: psxtmsleep01.exe
Result: invalid   
Time: 0:00:00.265927 psxtmsleep01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsleep01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsleep01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x143f8 lma 0
=>  Loading section .init, size 0x40 lma 143f8
=>  Loading section .fini, size 0x20 lma 14438
=>  Loading section .rodata, size 0x1ffe lma 14458
=>  Loading section .eh_frame_hdr, size 0xcfc lma 16458
=>  Loading section .eh_frame, size 0x4308 lma 17154
=>  Loading section .ctors, size 0x8 lma 1b45c
=>  Loading section .dtors, size 0x8 lma 1b464
=>  Loading section .got2, size 0x2c lma 1b46c
=>  Loading section .rtemsroset, size 0x6c lma 1b498
=>  Loading section .data, size 0x358 lma 1b508
=>  Loading section .sdata, size 0xa9 lma 1b860
=>  Start address 4
=>  Transfer rate: 903192 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsleep01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1539/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1532 W:0    | mipstx39/jmr3904: psxtmsleep02.exe
Result: invalid   
Time: 0:00:00.263066 psxtmsleep02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsleep02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsleep02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14518 lma 0
=>  Loading section .init, size 0x40 lma 14518
=>  Loading section .fini, size 0x20 lma 14558
=>  Loading section .rodata, size 0x2042 lma 14578
=>  Loading section .eh_frame_hdr, size 0xd0c lma 165bc
=>  Loading section .eh_frame, size 0x434c lma 172c8
=>  Loading section .ctors, size 0x8 lma 1b614
=>  Loading section .dtors, size 0x8 lma 1b61c
=>  Loading section .got2, size 0x2c lma 1b624
=>  Loading section .rtemsroset, size 0x6c lma 1b650
=>  Loading section .data, size 0x354 lma 1b6c0
=>  Loading section .sdata, size 0xa9 lma 1ba14
=>  Start address 4
=>  Transfer rate: 906680 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmsleep02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1540/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1533 W:0    | mipstx39/jmr3904: psxtmthread01.exe
Result: invalid   
Time: 0:00:00.264004 psxtmthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b80 lma 0
=>  Loading section .init, size 0x40 lma 13b80
=>  Loading section .fini, size 0x20 lma 13bc0
=>  Loading section .rodata, size 0x2030 lma 13be0
=>  Loading section .eh_frame_hdr, size 0xcac lma 15c10
=>  Loading section .eh_frame, size 0x4170 lma 168bc
=>  Loading section .ctors, size 0x8 lma 1aa2c
=>  Loading section .dtors, size 0x8 lma 1aa34
=>  Loading section .got2, size 0x2c lma 1aa3c
=>  Loading section .rtemsroset, size 0x6c lma 1aa68
=>  Loading section .data, size 0x348 lma 1aad8
=>  Loading section .sdata, size 0xa9 lma 1ae20
=>  Start address 4
=>  Transfer rate: 882216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1541/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1534 W:0    | mipstx39/jmr3904: psxtmthread02.exe
Result: invalid   
Time: 0:00:00.333981 psxtmthread02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13be0 lma 0
=>  Loading section .init, size 0x40 lma 13be0
=>  Loading section .fini, size 0x20 lma 13c20
=>  Loading section .rodata, size 0x2030 lma 13c40
=>  Loading section .eh_frame_hdr, size 0xcb4 lma 15c70
=>  Loading section .eh_frame, size 0x4160 lma 16924
=>  Loading section .ctors, size 0x8 lma 1aa84
=>  Loading section .dtors, size 0x8 lma 1aa8c
=>  Loading section .got2, size 0x2c lma 1aa94
=>  Loading section .rtemsroset, size 0x6c lma 1aac0
=>  Loading section .data, size 0x348 lma 1ab30
=>  Loading section .sdata, size 0xa9 lma 1ae78
=>  Start address 4
=>  Transfer rate: 882920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1542/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1534 W:0    | mipstx39/jmr3904: psxtmthread03.exe
Result: invalid   
Time: 0:00:00.256683 psxtmthread03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ae0 lma 0
=>  Loading section .init, size 0x40 lma 13ae0
=>  Loading section .fini, size 0x20 lma 13b20
=>  Loading section .rodata, size 0x2030 lma 13b40
=>  Loading section .eh_frame_hdr, size 0xca4 lma 15b70
=>  Loading section .eh_frame, size 0x412c lma 16814
=>  Loading section .ctors, size 0x8 lma 1a940
=>  Loading section .dtors, size 0x8 lma 1a948
=>  Loading section .got2, size 0x2c lma 1a950
=>  Loading section .rtemsroset, size 0x6c lma 1a97c
=>  Loading section .data, size 0x348 lma 1a9e8
=>  Loading section .sdata, size 0xa9 lma 1ad30
=>  Start address 4
=>  Transfer rate: 880328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1543/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1534 W:0    | mipstx39/jmr3904: psxtmthread04.exe
Result: invalid   
Time: 0:00:00.255937 psxtmthread04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ea0 lma 0
=>  Loading section .init, size 0x40 lma 13ea0
=>  Loading section .fini, size 0x20 lma 13ee0
=>  Loading section .rodata, size 0x2064 lma 13f00
=>  Loading section .eh_frame_hdr, size 0xcac lma 15f64
=>  Loading section .eh_frame, size 0x4218 lma 16c10
=>  Loading section .ctors, size 0x8 lma 1ae28
=>  Loading section .dtors, size 0x8 lma 1ae30
=>  Loading section .got2, size 0x2c lma 1ae38
=>  Loading section .rtemsroset, size 0x6c lma 1ae64
=>  Loading section .data, size 0x34c lma 1aed0
=>  Loading section .sdata, size 0xa9 lma 1b21c
=>  Start address 4
=>  Transfer rate: 890408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1544/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1534 W:0    | mipstx39/jmr3904: psxtmthread05.exe
Result: invalid   
Time: 0:00:00.253137 psxtmthread05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ea0 lma 0
=>  Loading section .init, size 0x40 lma 13ea0
=>  Loading section .fini, size 0x20 lma 13ee0
=>  Loading section .rodata, size 0x2050 lma 13f00
=>  Loading section .eh_frame_hdr, size 0xcbc lma 15f50
=>  Loading section .eh_frame, size 0x4248 lma 16c0c
=>  Loading section .ctors, size 0x8 lma 1ae54
=>  Loading section .dtors, size 0x8 lma 1ae5c
=>  Loading section .got2, size 0x2c lma 1ae64
=>  Loading section .rtemsroset, size 0x6c lma 1ae90
=>  Loading section .data, size 0x348 lma 1af00
=>  Loading section .sdata, size 0xa9 lma 1b248
=>  Start address 4
=>  Transfer rate: 890728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1545/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1542 W:0    | mipstx39/jmr3904: psxtmthread06.exe
Result: invalid   
Time: 0:00:00.511112 psxtmthread06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ea0 lma 0
=>  Loading section .init, size 0x40 lma 13ea0
=>  Loading section .fini, size 0x20 lma 13ee0
=>  Loading section .rodata, size 0x2050 lma 13f00
=>  Loading section .eh_frame_hdr, size 0xcbc lma 15f50
=>  Loading section .eh_frame, size 0x4248 lma 16c0c
=>  Loading section .ctors, size 0x8 lma 1ae54
=>  Loading section .dtors, size 0x8 lma 1ae5c
=>  Loading section .got2, size 0x2c lma 1ae64
=>  Loading section .rtemsroset, size 0x6c lma 1ae90
=>  Loading section .data, size 0x348 lma 1af00
=>  Loading section .sdata, size 0xa9 lma 1b248
=>  Start address 4
=>  Transfer rate: 890728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1546/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1542 W:0    | mipstx39/jmr3904: psxtmthreadattr01.exe
Result: invalid   
Time: 0:00:00.263961 psxtmthreadattr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthreadattr01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthreadattr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x145e0 lma 0
=>  Loading section .init, size 0x40 lma 145e0
=>  Loading section .fini, size 0x20 lma 14620
=>  Loading section .rodata, size 0x2370 lma 14640
=>  Loading section .eh_frame_hdr, size 0xd04 lma 169b0
=>  Loading section .eh_frame, size 0x425c lma 176b4
=>  Loading section .ctors, size 0x8 lma 1b910
=>  Loading section .dtors, size 0x8 lma 1b918
=>  Loading section .got2, size 0x2c lma 1b920
=>  Loading section .rtemsroset, size 0x6c lma 1b94c
=>  Loading section .data, size 0x34c lma 1b9b8
=>  Loading section .sdata, size 0xa9 lma 1bd04
=>  Start address 4
=>  Transfer rate: 912744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthreadattr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1547/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1542 W:0    | mipstx39/jmr3904: rhdeadlockbrk.exe
Result: invalid   
Time: 0:00:00.260665 rhdeadlockbrk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/rhealstone/rhdeadlockbrk.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/rhealstone/rhdeadlockbrk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x153e0 lma 0
=>  Loading section .init, size 0x40 lma 153e0
=>  Loading section .fini, size 0x20 lma 15420
=>  Loading section .rodata, size 0x24a4 lma 15440
=>  Loading section .eh_frame_hdr, size 0xd1c lma 178e4
=>  Loading section .eh_frame, size 0x4550 lma 18600
=>  Loading section .ctors, size 0x8 lma 1cb50
=>  Loading section .dtors, size 0x8 lma 1cb58
=>  Loading section .got2, size 0x2c lma 1cb60
=>  Loading section .rtemsroset, size 0x70 lma 1cb8c
=>  Loading section .data, size 0x378 lma 1cc00
=>  Loading section .sdata, size 0x95 lma 1cf78
=>  Start address 4
=>  Transfer rate: 950344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/rhealstone/rhdeadlockbrk.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1548/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1542 W:0    | mipstx39/jmr3904: rhilatency.exe
Result: invalid   
Time: 0:00:00.267141 rhilatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/rhealstone/rhilatency.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/rhealstone/rhilatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x132e0 lma 0
=>  Loading section .init, size 0x40 lma 132e0
=>  Loading section .fini, size 0x20 lma 13320
=>  Loading section .rodata, size 0x2477 lma 13340
=>  Loading section .eh_frame_hdr, size 0xc44 lma 157b8
=>  Loading section .eh_frame, size 0x3f3c lma 163fc
=>  Loading section .ctors, size 0x8 lma 1a338
=>  Loading section .dtors, size 0x8 lma 1a340
=>  Loading section .got2, size 0x2c lma 1a348
=>  Loading section .rtemsroset, size 0x6c lma 1a374
=>  Loading section .data, size 0x368 lma 1a3e0
=>  Loading section .sdata, size 0x91 lma 1a748
=>  Start address 4
=>  Transfer rate: 868032 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/rhealstone/rhilatency.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1549/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1542 W:0    | mipstx39/jmr3904: rhmlatency.exe
Result: invalid   
Time: 0:00:00.265215 rhmlatency.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/rhealstone/rhmlatency.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/rhealstone/rhmlatency.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14380 lma 0
=>  Loading section .init, size 0x40 lma 14380
=>  Loading section .fini, size 0x20 lma 143c0
=>  Loading section .rodata, size 0x2448 lma 143e0
=>  Loading section .eh_frame_hdr, size 0xce4 lma 16828
=>  Loading section .eh_frame, size 0x433c lma 1750c
=>  Loading section .ctors, size 0x8 lma 1b848
=>  Loading section .dtors, size 0x8 lma 1b850
=>  Loading section .got2, size 0x2c lma 1b858
=>  Loading section .rtemsroset, size 0x70 lma 1b884
=>  Loading section .data, size 0x378 lma 1b8f8
=>  Loading section .sdata, size 0x95 lma 1bc70
=>  Start address 4
=>  Transfer rate: 911368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/rhealstone/rhmlatency.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1550/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1542 W:0    | mipstx39/jmr3904: rhsemshuffle.exe
Result: invalid   
Time: 0:00:00.535144 rhsemshuffle.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/rhealstone/rhsemshuffle.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/rhealstone/rhsemshuffle.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15f30 lma 0
=>  Loading section .init, size 0x40 lma 15f30
=>  Loading section .fini, size 0x20 lma 15f70
=>  Loading section .rodata, size 0x2544 lma 15f90
=>  Loading section .eh_frame_hdr, size 0xd94 lma 184d4
=>  Loading section .eh_frame, size 0x4790 lma 19268
=>  Loading section .ctors, size 0x8 lma 1d9f8
=>  Loading section .dtors, size 0x8 lma 1da00
=>  Loading section .got2, size 0x2c lma 1da08
=>  Loading section .rtemsroset, size 0x74 lma 1da34
=>  Loading section .data, size 0x394 lma 1daa8
=>  Loading section .sdata, size 0xad lma 1de40
=>  Start address 4
=>  Transfer rate: 980808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/rhealstone/rhsemshuffle.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1551/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1542 W:0    | mipstx39/jmr3904: rhtaskpreempt.exe
Result: invalid   
Time: 0:00:00.521740 rhtaskpreempt.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/rhealstone/rhtaskpreempt.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/rhealstone/rhtaskpreempt.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x134c0 lma 0
=>  Loading section .init, size 0x40 lma 134c0
=>  Loading section .fini, size 0x20 lma 13500
=>  Loading section .rodata, size 0x2424 lma 13520
=>  Loading section .eh_frame_hdr, size 0xc3c lma 15944
=>  Loading section .eh_frame, size 0x3f44 lma 16580
=>  Loading section .ctors, size 0x8 lma 1a4c4
=>  Loading section .dtors, size 0x8 lma 1a4cc
=>  Loading section .got2, size 0x2c lma 1a4d4
=>  Loading section .rtemsroset, size 0x6c lma 1a500
=>  Loading section .data, size 0x348 lma 1a570
=>  Loading section .sdata, size 0x91 lma 1a8b8
=>  Start address 4
=>  Transfer rate: 870952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/rhealstone/rhtaskpreempt.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1552/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1542 W:0    | mipstx39/jmr3904: rhtaskswitch.exe
Result: invalid   
Time: 0:00:00.255278 rhtaskswitch.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/rhealstone/rhtaskswitch.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/rhealstone/rhtaskswitch.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13380 lma 0
=>  Loading section .init, size 0x40 lma 13380
=>  Loading section .fini, size 0x20 lma 133c0
=>  Loading section .rodata, size 0x241c lma 133e0
=>  Loading section .eh_frame_hdr, size 0xc2c lma 157fc
=>  Loading section .eh_frame, size 0x3ecc lma 16428
=>  Loading section .ctors, size 0x8 lma 1a2f4
=>  Loading section .dtors, size 0x8 lma 1a2fc
=>  Loading section .got2, size 0x2c lma 1a304
=>  Loading section .rtemsroset, size 0x6c lma 1a330
=>  Loading section .data, size 0x348 lma 1a3a0
=>  Loading section .sdata, size 0x91 lma 1a6e8
=>  Start address 4
=>  Transfer rate: 867240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/rhealstone/rhtaskswitch.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1553/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1547 W:0    | mipstx39/jmr3904: base_sp.exe
Result: invalid   
Time: 0:00:00.259287 base_sp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/base_sp.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/base_sp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14300 lma 0
=>  Loading section .init, size 0x40 lma 14300
=>  Loading section .fini, size 0x20 lma 14340
=>  Loading section .rodata, size 0x2420 lma 14360
=>  Loading section .eh_frame_hdr, size 0xcdc lma 16780
=>  Loading section .eh_frame, size 0x4234 lma 1745c
=>  Loading section .ctors, size 0x8 lma 1b690
=>  Loading section .dtors, size 0x8 lma 1b698
=>  Loading section .got2, size 0x2c lma 1b6a0
=>  Loading section .rtemsroset, size 0x70 lma 1b6cc
=>  Loading section .data, size 0x364 lma 1b740
=>  Loading section .sdata, size 0xa9 lma 1baa8
=>  Start address 4
=>  Transfer rate: 907848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/base_sp.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1554/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1548 W:0    | mipstx39/jmr3904: capture.exe
Result: invalid   
Time: 0:00:00.259631 capture.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/capture.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/capture.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x333e0 lma 0
=>  Loading section .init, size 0x40 lma 333e0
=>  Loading section .fini, size 0x20 lma 33420
=>  Loading section .rodata, size 0x5b36 lma 33440
=>  Loading section .eh_frame_hdr, size 0x19ec lma 38f78
=>  Loading section .eh_frame, size 0x9980 lma 3a964
=>  Loading section .tdata, size 0xc lma 442e4
=>  Loading section .ctors, size 0x8 lma 442f0
=>  Loading section .dtors, size 0x8 lma 442f8
=>  Loading section .got2, size 0x2c lma 44300
=>  Loading section .rtemsroset, size 0x7c lma 4432c
=>  Loading section .data, size 0x8b8 lma 443a8
=>  Loading section .sdata, size 0xd0 lma 44c60
=>  Start address 4
=>  Transfer rate: 2255216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/capture.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1555/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1547 W:0    | mipstx39/jmr3904: cdtest.exe
Result: invalid   
Time: 0:00:00.260120 cdtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/cdtest.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/cdtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x30654 lma 0
=>  Loading section .init, size 0x40 lma 30654
=>  Loading section .fini, size 0x20 lma 30694
=>  Loading section .rodata, size 0x4b44 lma 306b8
=>  Loading section .eh_frame_hdr, size 0x156c lma 351fc
=>  Loading section .eh_frame, size 0x89c4 lma 36768
=>  Loading section .gcc_except_table, size 0x16e lma 3f12c
=>  Loading section .tdata, size 0xc lma 3f29c
=>  Loading section .ctors, size 0x10 lma 3f2a8
=>  Loading section .dtors, size 0x8 lma 3f2b8
=>  Loading section .got2, size 0x2c lma 3f2c0
=>  Loading section .rtemsroset, size 0x7c lma 3f2ec
=>  Loading section .data, size 0x514 lma 3f368
=>  Loading section .sdata, size 0x128 lma 3f880
=>  Start address 4
=>  Transfer rate: 2084080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/cdtest.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00000004 in std::set_unexpected (func=0x0 <std::set_unexpected(void (*)())>) at ../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc:108
=>  108	../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc: No such file or directory.
[1556/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1547 W:0    | mipstx39/jmr3904: fileio.exe
Result: invalid   
Time: 0:00:00.261965 fileio.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/fileio.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/fileio.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x842e8 lma 0
=>  Loading section .init, size 0x40 lma 842e8
=>  Loading section .fini, size 0x20 lma 84328
=>  Loading section .rodata, size 0x13308 lma 84348
=>  Loading section .eh_frame_hdr, size 0x321c lma 97650
=>  Loading section .eh_frame, size 0x160a8 lma 9a86c
=>  Loading section .tdata, size 0x14 lma b0918
=>  Loading section .ctors, size 0x8 lma b092c
=>  Loading section .dtors, size 0x8 lma b0934
=>  Loading section .got2, size 0x2c lma b093c
=>  Loading section .rtemsroset, size 0x80 lma b0968
=>  Loading section .data, size 0x13b8 lma b09e8
=>  Loading section .sdata, size 0x164 lma b1da0
=>  Start address 4
=>  Transfer rate: 5830656 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/fileio.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1557/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1547 W:0    | mipstx39/jmr3904: hello.exe
Result: invalid   
Time: 0:00:00.266627 hello.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/hello.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/hello.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b188 lma 0
=>  Loading section .init, size 0x40 lma 1b188
=>  Loading section .fini, size 0x20 lma 1b1c8
=>  Loading section .rodata, size 0x2473 lma 1b1e8
=>  Loading section .eh_frame_hdr, size 0xe84 lma 1d65c
=>  Loading section .eh_frame, size 0x4f94 lma 1e4e0
=>  Loading section .tdata, size 0xc lma 23474
=>  Loading section .ctors, size 0x8 lma 23480
=>  Loading section .dtors, size 0x8 lma 23488
=>  Loading section .got2, size 0x2c lma 23490
=>  Loading section .rtemsroset, size 0x6c lma 234bc
=>  Loading section .data, size 0x4ec lma 23528
=>  Loading section .sdata, size 0x91 lma 23a14
=>  Start address 4
=>  Transfer rate: 1168672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/hello.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1558/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1551 W:0    | mipstx39/jmr3904: iostream.exe
Result: invalid   
Time: 0:00:00.276246 iostream.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/iostream.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/iostream.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x94048 lma 0
=>  Loading section .init, size 0x40 lma 94048
=>  Loading section .fini, size 0x20 lma 94088
=>  Loading section .rodata, size 0xa52c lma 940a8
=>  Loading section .eh_frame_hdr, size 0x36bc lma 9e5d4
=>  Loading section .eh_frame, size 0x168b4 lma a1c90
=>  Loading section .gcc_except_table, size 0x1d3d lma b8544
=>  Loading section .tdata, size 0xc lma ba284
=>  Loading section .ctors, size 0x28 lma ba290
=>  Loading section .dtors, size 0x8 lma ba2b8
=>  Loading section .got2, size 0x2c lma ba2c0
=>  Loading section .rtemsroset, size 0x74 lma ba2ec
=>  Loading section .data, size 0x5cc lma ba360
=>  Loading section .sdata, size 0x164 lma ba92c
=>  Start address 4
=>  Transfer rate: 6116456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/iostream.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00000004 in std::set_unexpected (func=0x0 <std::set_unexpected(void (*)())>) at ../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc:108
=>  108	../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc: No such file or directory.
[1559/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1552 W:0    | mipstx39/jmr3904: minimum.exe
[1560/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1553 W:0    | mipstx39/jmr3904: nsecs.exe
Result: invalid   
Time: 0:00:00.255974 nsecs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/nsecs.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/nsecs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1bc18 lma 0
=>  Loading section .init, size 0x40 lma 1bc18
=>  Loading section .fini, size 0x20 lma 1bc58
=>  Loading section .rodata, size 0x2b96 lma 1bc78
=>  Loading section .eh_frame_hdr, size 0xf04 lma 1e810
=>  Loading section .eh_frame, size 0x4fa4 lma 1f714
=>  Loading section .ctors, size 0x8 lma 246b8
=>  Loading section .dtors, size 0x8 lma 246c0
=>  Loading section .got2, size 0x2c lma 246c8
=>  Loading section .rtemsroset, size 0x70 lma 246f4
=>  Loading section .data, size 0x560 lma 24768
=>  Loading section .sdata, size 0xc8 lma 24cc8
=>  Start address 4
=>  Transfer rate: 1207376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/nsecs.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1561/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1555 W:0    | mipstx39/jmr3904: paranoia.exe
Result: invalid   
Time: 0:00:00.261603 paranoia.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/paranoia.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/paranoia.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x232f8 lma 0
=>  Loading section .init, size 0x40 lma 232f8
=>  Loading section .fini, size 0x20 lma 23338
=>  Loading section .rodata, size 0x565b lma 23358
=>  Loading section .eh_frame_hdr, size 0x1014 lma 289b4
=>  Loading section .eh_frame, size 0x5a2c lma 299c8
=>  Loading section .tdata, size 0xc lma 2f3f4
=>  Loading section .ctors, size 0x8 lma 2f400
=>  Loading section .dtors, size 0x8 lma 2f408
=>  Loading section .got2, size 0x2c lma 2f410
=>  Loading section .rtemsroset, size 0x70 lma 2f43c
=>  Loading section .data, size 0x61c lma 2f4b0
=>  Loading section .sdata, size 0x121 lma 2fad0
=>  Start address 4
=>  Transfer rate: 1564480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/paranoia.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1562/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1555 W:0    | mipstx39/jmr3904: ticker.exe
Result: invalid   
Time: 0:00:00.252020 ticker.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/ticker.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/ticker.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x151e8 lma 0
=>  Loading section .init, size 0x40 lma 151e8
=>  Loading section .fini, size 0x20 lma 15228
=>  Loading section .rodata, size 0x25c1 lma 15248
=>  Loading section .eh_frame_hdr, size 0xd64 lma 1780c
=>  Loading section .eh_frame, size 0x4454 lma 18570
=>  Loading section .ctors, size 0x8 lma 1c9c4
=>  Loading section .dtors, size 0x8 lma 1c9cc
=>  Loading section .got2, size 0x2c lma 1c9d4
=>  Loading section .rtemsroset, size 0x70 lma 1ca00
=>  Loading section .data, size 0x510 lma 1ca70
=>  Loading section .sdata, size 0xb9 lma 1cf80
=>  Start address 4
=>  Transfer rate: 950704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/ticker.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1563/1855] p:2    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1555 W:0    | mipstx39/jmr3904: unlimited.exe
Result: invalid   
Time: 0:00:00.287407 unlimited.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/samples/unlimited.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/samples/unlimited.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15a50 lma 0
=>  Loading section .init, size 0x40 lma 15a50
=>  Loading section .fini, size 0x20 lma 15a90
=>  Loading section .rodata, size 0x246c lma 15ab0
=>  Loading section .eh_frame_hdr, size 0xd54 lma 17f1c
=>  Loading section .eh_frame, size 0x47fc lma 18c70
=>  Loading section .tdata, size 0xc lma 1d46c
=>  Loading section .ctors, size 0x8 lma 1d478
=>  Loading section .dtors, size 0x8 lma 1d480
=>  Loading section .got2, size 0x2c lma 1d488
=>  Loading section .rtemsroset, size 0x6c lma 1d4b4
=>  Loading section .data, size 0x358 lma 1d520
=>  Loading section .sdata, size 0x94 lma 1d878
=>  Start address 4
=>  Transfer rate: 968800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/unlimited.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1564/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1558 W:0    | mipstx39/jmr3904: sp01.exe
Result: invalid   
Time: 0:00:00.255481 sp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef1c lma 0
=>  Loading section .init, size 0x40 lma ef1c
=>  Loading section .fini, size 0x20 lma ef5c
=>  Loading section .rodata, size 0x21a1 lma ef80
=>  Loading section .eh_frame_hdr, size 0x774 lma 11124
=>  Loading section .eh_frame, size 0x2738 lma 11898
=>  Loading section .ctors, size 0x8 lma 13fd0
=>  Loading section .dtors, size 0x8 lma 13fd8
=>  Loading section .got2, size 0x2c lma 13fe0
=>  Loading section .rtemsroset, size 0x60 lma 1400c
=>  Loading section .data, size 0x260 lma 14070
=>  Loading section .sdata, size 0x9c lma 142d0
=>  Start address 4
=>  Transfer rate: 662280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1565/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1558 W:0    | mipstx39/jmr3904: sp02.exe
Result: invalid   
Time: 0:00:00.261657 sp02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x160e8 lma 0
=>  Loading section .init, size 0x40 lma 160e8
=>  Loading section .fini, size 0x20 lma 16128
=>  Loading section .rodata, size 0x2898 lma 16148
=>  Loading section .eh_frame_hdr, size 0xd4c lma 189e0
=>  Loading section .eh_frame, size 0x46b4 lma 1972c
=>  Loading section .ctors, size 0x8 lma 1dde0
=>  Loading section .dtors, size 0x8 lma 1dde8
=>  Loading section .got2, size 0x2c lma 1ddf0
=>  Loading section .rtemsroset, size 0x70 lma 1de1c
=>  Loading section .data, size 0x364 lma 1de90
=>  Loading section .sdata, size 0xb1 lma 1e1f8
=>  Start address 4
=>  Transfer rate: 988424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1566/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1558 W:0    | mipstx39/jmr3904: sp03.exe
Result: invalid   
Time: 0:00:00.276328 sp03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15668 lma 0
=>  Loading section .init, size 0x40 lma 15668
=>  Loading section .fini, size 0x20 lma 156a8
=>  Loading section .rodata, size 0x267d lma 156c8
=>  Loading section .eh_frame_hdr, size 0xd34 lma 17d48
=>  Loading section .eh_frame, size 0x4520 lma 18a7c
=>  Loading section .ctors, size 0x8 lma 1cf9c
=>  Loading section .dtors, size 0x8 lma 1cfa4
=>  Loading section .got2, size 0x2c lma 1cfac
=>  Loading section .rtemsroset, size 0x70 lma 1cfd8
=>  Loading section .data, size 0x390 lma 1d048
=>  Loading section .sdata, size 0xc1 lma 1d3d8
=>  Start address 4
=>  Transfer rate: 959664 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1567/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1559 W:0    | mipstx39/jmr3904: sp04.exe
Result: invalid   
Time: 0:00:00.265504 sp04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x175fc lma 0
=>  Loading section .init, size 0x40 lma 175fc
=>  Loading section .fini, size 0x20 lma 1763c
=>  Loading section .rodata, size 0x28d9 lma 17660
=>  Loading section .eh_frame_hdr, size 0xe54 lma 19f3c
=>  Loading section .eh_frame, size 0x4e80 lma 1ad90
=>  Loading section .ctors, size 0x8 lma 1fc10
=>  Loading section .dtors, size 0x8 lma 1fc18
=>  Loading section .got2, size 0x2c lma 1fc20
=>  Loading section .rtemsroset, size 0x78 lma 1fc4c
=>  Loading section .data, size 0x568 lma 1fcc8
=>  Loading section .sdata, size 0xbd lma 20230
=>  Start address 4
=>  Transfer rate: 1054480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1568/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1559 W:0    | mipstx39/jmr3904: sp05.exe
Result: invalid   
Time: 0:00:00.255556 sp05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14fc8 lma 0
=>  Loading section .init, size 0x40 lma 14fc8
=>  Loading section .fini, size 0x20 lma 15008
=>  Loading section .rodata, size 0x26ec lma 15028
=>  Loading section .eh_frame_hdr, size 0xce4 lma 17714
=>  Loading section .eh_frame, size 0x42f0 lma 183f8
=>  Loading section .ctors, size 0x8 lma 1c6e8
=>  Loading section .dtors, size 0x8 lma 1c6f0
=>  Loading section .got2, size 0x2c lma 1c6f8
=>  Loading section .rtemsroset, size 0x70 lma 1c724
=>  Loading section .data, size 0x364 lma 1c798
=>  Loading section .sdata, size 0xb5 lma 1cb00
=>  Start address 4
=>  Transfer rate: 941416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1569/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1560 W:0    | mipstx39/jmr3904: sp06.exe
Result: invalid   
Time: 0:00:00.261377 sp06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ea8 lma 0
=>  Loading section .init, size 0x40 lma 14ea8
=>  Loading section .fini, size 0x20 lma 14ee8
=>  Loading section .rodata, size 0x2578 lma 14f08
=>  Loading section .eh_frame_hdr, size 0xce4 lma 17480
=>  Loading section .eh_frame, size 0x432c lma 18164
=>  Loading section .ctors, size 0x8 lma 1c490
=>  Loading section .dtors, size 0x8 lma 1c498
=>  Loading section .got2, size 0x2c lma 1c4a0
=>  Loading section .rtemsroset, size 0x70 lma 1c4cc
=>  Loading section .data, size 0x364 lma 1c540
=>  Loading section .sdata, size 0xb5 lma 1c8a8
=>  Start address 4
=>  Transfer rate: 936616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1570/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1560 W:0    | mipstx39/jmr3904: sp07.exe
Result: invalid   
Time: 0:00:00.255943 sp07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16d3c lma 0
=>  Loading section .init, size 0x40 lma 16d3c
=>  Loading section .fini, size 0x20 lma 16d7c
=>  Loading section .rodata, size 0x2c35 lma 16da0
=>  Loading section .eh_frame_hdr, size 0xe1c lma 199d8
=>  Loading section .eh_frame, size 0x4850 lma 1a7f4
=>  Loading section .ctors, size 0x8 lma 1f044
=>  Loading section .dtors, size 0x8 lma 1f04c
=>  Loading section .got2, size 0x2c lma 1f054
=>  Loading section .rtemsroset, size 0x74 lma 1f080
=>  Loading section .data, size 0x53c lma 1f0f8
=>  Loading section .sdata, size 0xad lma 1f638
=>  Start address 4
=>  Transfer rate: 1029808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1571/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1561 W:0    | mipstx39/jmr3904: sp08.exe
Result: invalid   
Time: 0:00:00.274037 sp08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13e78 lma 0
=>  Loading section .init, size 0x40 lma 13e78
=>  Loading section .fini, size 0x20 lma 13eb8
=>  Loading section .rodata, size 0x2648 lma 13ed8
=>  Loading section .eh_frame_hdr, size 0xc14 lma 16520
=>  Loading section .eh_frame, size 0x3ee8 lma 17134
=>  Loading section .ctors, size 0x8 lma 1b01c
=>  Loading section .dtors, size 0x8 lma 1b024
=>  Loading section .got2, size 0x2c lma 1b02c
=>  Loading section .rtemsroset, size 0x6c lma 1b058
=>  Loading section .data, size 0x348 lma 1b0c8
=>  Loading section .sdata, size 0x99 lma 1b410
=>  Start address 4
=>  Transfer rate: 894248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1572/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1567 W:0    | mipstx39/jmr3904: sp11.exe
Result: invalid   
Time: 0:00:00.265851 sp11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp11.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19788 lma 0
=>  Loading section .init, size 0x40 lma 19788
=>  Loading section .fini, size 0x20 lma 197c8
=>  Loading section .rodata, size 0x361c lma 197e8
=>  Loading section .eh_frame_hdr, size 0xddc lma 1ce04
=>  Loading section .eh_frame, size 0x4b90 lma 1dbe0
=>  Loading section .ctors, size 0x8 lma 22770
=>  Loading section .dtors, size 0x8 lma 22778
=>  Loading section .got2, size 0x2c lma 22780
=>  Loading section .rtemsroset, size 0x74 lma 227ac
=>  Loading section .data, size 0x3c0 lma 22820
=>  Loading section .sdata, size 0xbd lma 22be0
=>  Start address 4
=>  Transfer rate: 1139944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp11.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1573/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1568 W:0    | mipstx39/jmr3904: sp12.exe
Result: invalid   
Time: 0:00:00.262124 sp12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp12.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x197dc lma 0
=>  Loading section .init, size 0x40 lma 197dc
=>  Loading section .fini, size 0x20 lma 1981c
=>  Loading section .rodata, size 0x3459 lma 19840
=>  Loading section .eh_frame_hdr, size 0xe14 lma 1cc9c
=>  Loading section .eh_frame, size 0x4c5c lma 1dab0
=>  Loading section .ctors, size 0x8 lma 2270c
=>  Loading section .dtors, size 0x8 lma 22714
=>  Loading section .got2, size 0x2c lma 2271c
=>  Loading section .rtemsroset, size 0x74 lma 22748
=>  Loading section .data, size 0x394 lma 227c0
=>  Loading section .sdata, size 0xb9 lma 22b58
=>  Start address 4
=>  Transfer rate: 1138704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp12.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1574/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1568 W:0    | mipstx39/jmr3904: sp13.exe
Result: invalid   
Time: 0:00:00.262002 sp13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp13.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x192bc lma 0
=>  Loading section .init, size 0x40 lma 192bc
=>  Loading section .fini, size 0x20 lma 192fc
=>  Loading section .rodata, size 0x31e4 lma 19320
=>  Loading section .eh_frame_hdr, size 0xe44 lma 1c504
=>  Loading section .eh_frame, size 0x4ec0 lma 1d348
=>  Loading section .ctors, size 0x8 lma 22208
=>  Loading section .dtors, size 0x8 lma 22210
=>  Loading section .got2, size 0x2c lma 22218
=>  Loading section .rtemsroset, size 0x74 lma 22244
=>  Loading section .data, size 0x394 lma 222b8
=>  Loading section .sdata, size 0xb9 lma 22650
=>  Start address 4
=>  Transfer rate: 1128456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp13.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1575/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1568 W:0    | mipstx39/jmr3904: sp14.exe
Result: invalid   
Time: 0:00:00.294239 sp14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp14.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x159c8 lma 0
=>  Loading section .init, size 0x40 lma 159c8
=>  Loading section .fini, size 0x20 lma 15a08
=>  Loading section .rodata, size 0x2844 lma 15a28
=>  Loading section .eh_frame_hdr, size 0xd24 lma 1826c
=>  Loading section .eh_frame, size 0x44d8 lma 18f90
=>  Loading section .ctors, size 0x8 lma 1d468
=>  Loading section .dtors, size 0x8 lma 1d470
=>  Loading section .got2, size 0x2c lma 1d478
=>  Loading section .rtemsroset, size 0x74 lma 1d4a4
=>  Loading section .data, size 0x394 lma 1d518
=>  Loading section .sdata, size 0xb5 lma 1d8b0
=>  Start address 4
=>  Transfer rate: 969480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp14.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1576/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1568 W:0    | mipstx39/jmr3904: sp15.exe
Result: invalid   
Time: 0:00:00.265303 sp15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp15.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x150e8 lma 0
=>  Loading section .init, size 0x40 lma 150e8
=>  Loading section .fini, size 0x20 lma 15128
=>  Loading section .rodata, size 0x27b8 lma 15148
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 17900
=>  Loading section .eh_frame, size 0x43a0 lma 185f4
=>  Loading section .ctors, size 0x8 lma 1c994
=>  Loading section .dtors, size 0x8 lma 1c99c
=>  Loading section .got2, size 0x2c lma 1c9a4
=>  Loading section .rtemsroset, size 0x74 lma 1c9d0
=>  Loading section .data, size 0x394 lma 1ca48
=>  Loading section .sdata, size 0xad lma 1cde0
=>  Start address 4
=>  Transfer rate: 947240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp15.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1577/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1568 W:0    | mipstx39/jmr3904: sp16.exe
Result: invalid   
Time: 0:00:00.263740 sp16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp16.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18688 lma 0
=>  Loading section .init, size 0x40 lma 18688
=>  Loading section .fini, size 0x20 lma 186c8
=>  Loading section .rodata, size 0x3058 lma 186e8
=>  Loading section .eh_frame_hdr, size 0xde4 lma 1b740
=>  Loading section .eh_frame, size 0x4af8 lma 1c524
=>  Loading section .ctors, size 0x8 lma 2101c
=>  Loading section .dtors, size 0x8 lma 21024
=>  Loading section .got2, size 0x2c lma 2102c
=>  Loading section .rtemsroset, size 0x74 lma 21058
=>  Loading section .data, size 0x394 lma 210d0
=>  Loading section .sdata, size 0xb9 lma 21468
=>  Start address 4
=>  Transfer rate: 1091784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp16.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1578/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1568 W:0    | mipstx39/jmr3904: sp17.exe
Result: invalid   
Time: 0:00:00.256459 sp17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp17.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14a08 lma 0
=>  Loading section .init, size 0x40 lma 14a08
=>  Loading section .fini, size 0x20 lma 14a48
=>  Loading section .rodata, size 0x2564 lma 14a68
=>  Loading section .eh_frame_hdr, size 0xce4 lma 16fcc
=>  Loading section .eh_frame, size 0x42ec lma 17cb0
=>  Loading section .ctors, size 0x8 lma 1bf9c
=>  Loading section .dtors, size 0x8 lma 1bfa4
=>  Loading section .got2, size 0x2c lma 1bfac
=>  Loading section .rtemsroset, size 0x70 lma 1bfd8
=>  Loading section .data, size 0x364 lma 1c048
=>  Loading section .sdata, size 0xad lma 1c3b0
=>  Start address 4
=>  Transfer rate: 926408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp17.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1579/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1569 W:0    | mipstx39/jmr3904: sp18.exe
Result: invalid   
Time: 0:00:00.254767 sp18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp18.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13d58 lma 0
=>  Loading section .init, size 0x40 lma 13d58
=>  Loading section .fini, size 0x20 lma 13d98
=>  Loading section .rodata, size 0x23dc lma 13db8
=>  Loading section .eh_frame_hdr, size 0xcdc lma 16194
=>  Loading section .eh_frame, size 0x4270 lma 16e70
=>  Loading section .ctors, size 0x8 lma 1b0e0
=>  Loading section .dtors, size 0x8 lma 1b0e8
=>  Loading section .got2, size 0x2c lma 1b0f0
=>  Loading section .rtemsroset, size 0x6c lma 1b11c
=>  Loading section .data, size 0x378 lma 1b188
=>  Loading section .sdata, size 0x99 lma 1b500
=>  Start address 4
=>  Transfer rate: 896200 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp18.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1580/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1569 W:0    | mipstx39/jmr3904: sp19.exe
Result: invalid   
Time: 0:00:00.251654 sp19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp19.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x20b60 lma 0
=>  Loading section .init, size 0x40 lma 20b60
=>  Loading section .fini, size 0x20 lma 20ba0
=>  Loading section .rodata, size 0x360f lma 20bc0
=>  Loading section .eh_frame_hdr, size 0x106c lma 241d0
=>  Loading section .eh_frame, size 0x58fc lma 2523c
=>  Loading section .tdata, size 0xc lma 2ab38
=>  Loading section .ctors, size 0x8 lma 2ab44
=>  Loading section .dtors, size 0x8 lma 2ab4c
=>  Loading section .got2, size 0x2c lma 2ab54
=>  Loading section .rtemsroset, size 0x70 lma 2ab80
=>  Loading section .data, size 0x6b0 lma 2abf0
=>  Loading section .sdata, size 0xc1 lma 2b2a0
=>  Start address 4
=>  Transfer rate: 1415936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp19.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1581/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1577 W:0    | mipstx39/jmr3904: sp20.exe
Result: invalid   
Time: 0:00:00.257065 sp20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp20.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1de90 lma 0
=>  Loading section .init, size 0x40 lma 1de90
=>  Loading section .fini, size 0x20 lma 1ded0
=>  Loading section .rodata, size 0x2bb3 lma 1def0
=>  Loading section .eh_frame_hdr, size 0xf94 lma 20aa4
=>  Loading section .eh_frame, size 0x57ec lma 21a38
=>  Loading section .tdata, size 0xc lma 27224
=>  Loading section .ctors, size 0x8 lma 27230
=>  Loading section .dtors, size 0x8 lma 27238
=>  Loading section .got2, size 0x2c lma 27240
=>  Loading section .rtemsroset, size 0x74 lma 2726c
=>  Loading section .data, size 0x524 lma 272e0
=>  Loading section .sdata, size 0xb1 lma 27808
=>  Start address 4
=>  Transfer rate: 1295776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp20.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1582/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1577 W:0    | mipstx39/jmr3904: sp2038.exe
Result: invalid   
Time: 0:00:00.254969 sp2038.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp2038.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp2038.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13f18 lma 0
=>  Loading section .init, size 0x40 lma 13f18
=>  Loading section .fini, size 0x20 lma 13f58
=>  Loading section .rodata, size 0x2288 lma 13f78
=>  Loading section .eh_frame_hdr, size 0xc44 lma 16200
=>  Loading section .eh_frame, size 0x4034 lma 16e44
=>  Loading section .ctors, size 0x8 lma 1ae78
=>  Loading section .dtors, size 0x8 lma 1ae80
=>  Loading section .got2, size 0x2c lma 1ae88
=>  Loading section .rtemsroset, size 0x6c lma 1aeb4
=>  Loading section .data, size 0x370 lma 1af20
=>  Loading section .sdata, size 0xc1 lma 1b290
=>  Start address 4
=>  Transfer rate: 891528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp2038.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1583/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1577 W:0    | mipstx39/jmr3904: sp21.exe
Result: invalid   
Time: 0:00:00.273555 sp21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp21.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18e20 lma 0
=>  Loading section .init, size 0x40 lma 18e20
=>  Loading section .fini, size 0x20 lma 18e60
=>  Loading section .rodata, size 0x2c2d lma 18e80
=>  Loading section .eh_frame_hdr, size 0xef4 lma 1bab0
=>  Loading section .eh_frame, size 0x4ef0 lma 1c9a4
=>  Loading section .ctors, size 0x8 lma 21894
=>  Loading section .dtors, size 0x8 lma 2189c
=>  Loading section .got2, size 0x2c lma 218a4
=>  Loading section .rtemsroset, size 0x70 lma 218d0
=>  Loading section .data, size 0x3b0 lma 21940
=>  Loading section .sdata, size 0xc1 lma 21cf0
=>  Start address 4
=>  Transfer rate: 1109360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1584/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1577 W:0    | mipstx39/jmr3904: sp22.exe
Result: invalid   
Time: 0:00:00.259957 sp22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp22.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1641c lma 0
=>  Loading section .init, size 0x40 lma 1641c
=>  Loading section .fini, size 0x20 lma 1645c
=>  Loading section .rodata, size 0x28d9 lma 16480
=>  Loading section .eh_frame_hdr, size 0xd9c lma 18d5c
=>  Loading section .eh_frame, size 0x4708 lma 19af8
=>  Loading section .ctors, size 0x8 lma 1e200
=>  Loading section .dtors, size 0x8 lma 1e208
=>  Loading section .got2, size 0x2c lma 1e210
=>  Loading section .rtemsroset, size 0x74 lma 1e23c
=>  Loading section .data, size 0x3c0 lma 1e2b0
=>  Loading section .sdata, size 0xc1 lma 1e670
=>  Start address 4
=>  Transfer rate: 997712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp22.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1585/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1577 W:0    | mipstx39/jmr3904: sp23.exe
Result: invalid   
Time: 0:00:00.275471 sp23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp23.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14968 lma 0
=>  Loading section .init, size 0x40 lma 14968
=>  Loading section .fini, size 0x20 lma 149a8
=>  Loading section .rodata, size 0x2508 lma 149c8
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 16ed0
=>  Loading section .eh_frame, size 0x4358 lma 17bc4
=>  Loading section .ctors, size 0x8 lma 1bf1c
=>  Loading section .dtors, size 0x8 lma 1bf24
=>  Loading section .got2, size 0x2c lma 1bf2c
=>  Loading section .rtemsroset, size 0x74 lma 1bf58
=>  Loading section .data, size 0x394 lma 1bfd0
=>  Loading section .sdata, size 0xb1 lma 1c368
=>  Start address 4
=>  Transfer rate: 925832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp23.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1586/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1577 W:0    | mipstx39/jmr3904: sp24.exe
Result: invalid   
Time: 0:00:00.253600 sp24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp24.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15748 lma 0
=>  Loading section .init, size 0x40 lma 15748
=>  Loading section .fini, size 0x20 lma 15788
=>  Loading section .rodata, size 0x264d lma 157a8
=>  Loading section .eh_frame_hdr, size 0xdbc lma 17df8
=>  Loading section .eh_frame, size 0x46a4 lma 18bb4
=>  Loading section .ctors, size 0x8 lma 1d258
=>  Loading section .dtors, size 0x8 lma 1d260
=>  Loading section .got2, size 0x2c lma 1d268
=>  Loading section .rtemsroset, size 0x74 lma 1d294
=>  Loading section .data, size 0x510 lma 1d308
=>  Loading section .sdata, size 0xc1 lma 1d818
=>  Start address 4
=>  Transfer rate: 968368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp24.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1587/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1577 W:0    | mipstx39/jmr3904: sp25.exe
Result: invalid   
Time: 0:00:00.255032 sp25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp25.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16368 lma 0
=>  Loading section .init, size 0x40 lma 16368
=>  Loading section .fini, size 0x20 lma 163a8
=>  Loading section .rodata, size 0x28f8 lma 163c8
=>  Loading section .eh_frame_hdr, size 0xdbc lma 18cc0
=>  Loading section .eh_frame, size 0x472c lma 19a7c
=>  Loading section .ctors, size 0x8 lma 1e1a8
=>  Loading section .dtors, size 0x8 lma 1e1b0
=>  Loading section .got2, size 0x2c lma 1e1b8
=>  Loading section .rtemsroset, size 0x74 lma 1e1e4
=>  Loading section .data, size 0x394 lma 1e258
=>  Loading section .sdata, size 0xb5 lma 1e5f0
=>  Start address 4
=>  Transfer rate: 996616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp25.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1588/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1577 W:0    | mipstx39/jmr3904: sp26.exe
Result: invalid   
Time: 0:00:00.253794 sp26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp26.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14428 lma 0
=>  Loading section .init, size 0x40 lma 14428
=>  Loading section .fini, size 0x20 lma 14468
=>  Loading section .rodata, size 0x23a8 lma 14488
=>  Loading section .eh_frame_hdr, size 0xce4 lma 16830
=>  Loading section .eh_frame, size 0x42fc lma 17514
=>  Loading section .ctors, size 0x8 lma 1b810
=>  Loading section .dtors, size 0x8 lma 1b818
=>  Loading section .got2, size 0x2c lma 1b820
=>  Loading section .rtemsroset, size 0x70 lma 1b84c
=>  Loading section .data, size 0x368 lma 1b8c0
=>  Loading section .sdata, size 0xb1 lma 1bc28
=>  Start address 4
=>  Transfer rate: 911016 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp26.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1589/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1585 W:0    | mipstx39/jmr3904: sp27.exe
Result: invalid   
Time: 0:00:00.257169 sp27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp27.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15128 lma 0
=>  Loading section .init, size 0x40 lma 15128
=>  Loading section .fini, size 0x20 lma 15168
=>  Loading section .rodata, size 0x2450 lma 15188
=>  Loading section .eh_frame_hdr, size 0xd5c lma 175d8
=>  Loading section .eh_frame, size 0x45bc lma 18334
=>  Loading section .ctors, size 0x8 lma 1c8f0
=>  Loading section .dtors, size 0x8 lma 1c8f8
=>  Loading section .got2, size 0x2c lma 1c900
=>  Loading section .rtemsroset, size 0x74 lma 1c92c
=>  Loading section .data, size 0x394 lma 1c9a0
=>  Loading section .sdata, size 0xb5 lma 1cd38
=>  Start address 4
=>  Transfer rate: 945992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp27.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1590/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1585 W:0    | mipstx39/jmr3904: sp27a.exe
Result: invalid   
Time: 0:00:00.257826 sp27a.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp27a.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp27a.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15128 lma 0
=>  Loading section .init, size 0x40 lma 15128
=>  Loading section .fini, size 0x20 lma 15168
=>  Loading section .rodata, size 0x2460 lma 15188
=>  Loading section .eh_frame_hdr, size 0xd5c lma 175e8
=>  Loading section .eh_frame, size 0x45bc lma 18344
=>  Loading section .ctors, size 0x8 lma 1c900
=>  Loading section .dtors, size 0x8 lma 1c908
=>  Loading section .got2, size 0x2c lma 1c910
=>  Loading section .rtemsroset, size 0x74 lma 1c93c
=>  Loading section .data, size 0x394 lma 1c9b0
=>  Loading section .sdata, size 0xb5 lma 1cd48
=>  Start address 4
=>  Transfer rate: 946120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp27a.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1591/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1585 W:0    | mipstx39/jmr3904: sp29.exe
Result: invalid   
Time: 0:00:00.306162 sp29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp29.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15ae8 lma 0
=>  Loading section .init, size 0x40 lma 15ae8
=>  Loading section .fini, size 0x20 lma 15b28
=>  Loading section .rodata, size 0x2690 lma 15b48
=>  Loading section .eh_frame_hdr, size 0xd6c lma 181d8
=>  Loading section .eh_frame, size 0x46ec lma 18f44
=>  Loading section .ctors, size 0x8 lma 1d630
=>  Loading section .dtors, size 0x8 lma 1d638
=>  Loading section .got2, size 0x2c lma 1d640
=>  Loading section .rtemsroset, size 0x74 lma 1d66c
=>  Loading section .data, size 0x394 lma 1d6e0
=>  Loading section .sdata, size 0xb5 lma 1da78
=>  Start address 4
=>  Transfer rate: 973128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp29.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1592/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1585 W:0    | mipstx39/jmr3904: sp30.exe
Result: invalid   
Time: 0:00:00.304089 sp30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp30.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15f3c lma 0
=>  Loading section .init, size 0x40 lma 15f3c
=>  Loading section .fini, size 0x20 lma 15f7c
=>  Loading section .rodata, size 0x2749 lma 15fa0
=>  Loading section .eh_frame_hdr, size 0xde4 lma 186ec
=>  Loading section .eh_frame, size 0x4878 lma 194d0
=>  Loading section .ctors, size 0x8 lma 1dd48
=>  Loading section .dtors, size 0x8 lma 1dd50
=>  Loading section .got2, size 0x2c lma 1dd58
=>  Loading section .rtemsroset, size 0x74 lma 1dd84
=>  Loading section .data, size 0x510 lma 1ddf8
=>  Loading section .sdata, size 0xc1 lma 1e308
=>  Start address 4
=>  Transfer rate: 990736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp30.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1593/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1585 W:0    | mipstx39/jmr3904: sp31.exe
Result: invalid   
Time: 0:00:00.258246 sp31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp31.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1863c lma 0
=>  Loading section .init, size 0x40 lma 1863c
=>  Loading section .fini, size 0x20 lma 1867c
=>  Loading section .rodata, size 0x2c41 lma 186a0
=>  Loading section .eh_frame_hdr, size 0xdd4 lma 1b2e4
=>  Loading section .eh_frame, size 0x4a28 lma 1c0b8
=>  Loading section .ctors, size 0x8 lma 20ae0
=>  Loading section .dtors, size 0x8 lma 20ae8
=>  Loading section .got2, size 0x2c lma 20af0
=>  Loading section .rtemsroset, size 0x74 lma 20b1c
=>  Loading section .data, size 0x3c0 lma 20b90
=>  Loading section .sdata, size 0xc1 lma 20f50
=>  Start address 4
=>  Transfer rate: 1081424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp31.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1594/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1585 W:0    | mipstx39/jmr3904: sp32.exe
Result: invalid   
Time: 0:00:00.261486 sp32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp32.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ba8 lma 0
=>  Loading section .init, size 0x40 lma 14ba8
=>  Loading section .fini, size 0x20 lma 14be8
=>  Loading section .rodata, size 0x2418 lma 14c08
=>  Loading section .eh_frame_hdr, size 0xce4 lma 17020
=>  Loading section .eh_frame, size 0x43c0 lma 17d04
=>  Loading section .ctors, size 0x8 lma 1c0c4
=>  Loading section .dtors, size 0x8 lma 1c0cc
=>  Loading section .got2, size 0x2c lma 1c0d4
=>  Loading section .rtemsroset, size 0x74 lma 1c100
=>  Loading section .data, size 0x394 lma 1c178
=>  Loading section .sdata, size 0xb1 lma 1c510
=>  Start address 4
=>  Transfer rate: 929224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp32.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1595/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1585 W:0    | mipstx39/jmr3904: sp33.exe
Result: invalid   
Time: 0:00:00.265143 sp33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp33.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16120 lma 0
=>  Loading section .init, size 0x40 lma 16120
=>  Loading section .fini, size 0x20 lma 16160
=>  Loading section .rodata, size 0x298c lma 16180
=>  Loading section .eh_frame_hdr, size 0xd64 lma 18b0c
=>  Loading section .eh_frame, size 0x4938 lma 19870
=>  Loading section .ctors, size 0x8 lma 1e1a8
=>  Loading section .dtors, size 0x8 lma 1e1b0
=>  Loading section .got2, size 0x2c lma 1e1b8
=>  Loading section .rtemsroset, size 0x74 lma 1e1e4
=>  Loading section .data, size 0x394 lma 1e258
=>  Loading section .sdata, size 0xb5 lma 1e5f0
=>  Start address 4
=>  Transfer rate: 996616 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp33.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1596/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1585 W:0    | mipstx39/jmr3904: sp34.exe
Result: invalid   
Time: 0:00:00.256363 sp34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp34.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15988 lma 0
=>  Loading section .init, size 0x40 lma 15988
=>  Loading section .fini, size 0x20 lma 159c8
=>  Loading section .rodata, size 0x2500 lma 159e8
=>  Loading section .eh_frame_hdr, size 0xd74 lma 17ee8
=>  Loading section .eh_frame, size 0x4664 lma 18c5c
=>  Loading section .ctors, size 0x8 lma 1d2c0
=>  Loading section .dtors, size 0x8 lma 1d2c8
=>  Loading section .got2, size 0x2c lma 1d2d0
=>  Loading section .rtemsroset, size 0x74 lma 1d2fc
=>  Loading section .data, size 0x394 lma 1d370
=>  Loading section .sdata, size 0xb5 lma 1d708
=>  Start address 4
=>  Transfer rate: 966088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp34.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1597/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1586 W:0    | mipstx39/jmr3904: sp35.exe
Result: invalid   
Time: 0:00:00.307705 sp35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp35.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c230 lma 0
=>  Loading section .init, size 0x40 lma 1c230
=>  Loading section .fini, size 0x20 lma 1c270
=>  Loading section .rodata, size 0x2cd3 lma 1c290
=>  Loading section .eh_frame_hdr, size 0xea4 lma 1ef64
=>  Loading section .eh_frame, size 0x4f00 lma 1fe08
=>  Loading section .ctors, size 0x8 lma 24d08
=>  Loading section .dtors, size 0x8 lma 24d10
=>  Loading section .got2, size 0x2c lma 24d18
=>  Loading section .rtemsroset, size 0x74 lma 24d44
=>  Loading section .data, size 0x500 lma 24db8
=>  Loading section .sdata, size 0xb5 lma 252b8
=>  Start address 4
=>  Transfer rate: 1219424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp35.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1598/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1593 W:0    | mipstx39/jmr3904: sp37.exe
Result: invalid   
Time: 0:00:00.262044 sp37.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp37.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp37.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16ea8 lma 0
=>  Loading section .init, size 0x40 lma 16ea8
=>  Loading section .fini, size 0x20 lma 16ee8
=>  Loading section .rodata, size 0x2d14 lma 16f08
=>  Loading section .eh_frame_hdr, size 0xe14 lma 19c1c
=>  Loading section .eh_frame, size 0x4850 lma 1aa30
=>  Loading section .ctors, size 0x8 lma 1f280
=>  Loading section .dtors, size 0x8 lma 1f288
=>  Loading section .got2, size 0x2c lma 1f290
=>  Loading section .rtemsroset, size 0x74 lma 1f2bc
=>  Loading section .data, size 0x3c0 lma 1f330
=>  Loading section .sdata, size 0xc1 lma 1f6f0
=>  Start address 4
=>  Transfer rate: 1031560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp37.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1599/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1593 W:0    | mipstx39/jmr3904: sp38.exe
Result: invalid   
Time: 0:00:00.256130 sp38.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp38.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp38.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14708 lma 0
=>  Loading section .init, size 0x40 lma 14708
=>  Loading section .fini, size 0x20 lma 14748
=>  Loading section .rodata, size 0x2408 lma 14768
=>  Loading section .eh_frame_hdr, size 0xd04 lma 16b70
=>  Loading section .eh_frame, size 0x4368 lma 17874
=>  Loading section .ctors, size 0x8 lma 1bbdc
=>  Loading section .dtors, size 0x8 lma 1bbe4
=>  Loading section .got2, size 0x2c lma 1bbec
=>  Loading section .rtemsroset, size 0x74 lma 1bc18
=>  Loading section .data, size 0x394 lma 1bc90
=>  Loading section .sdata, size 0xb1 lma 1c028
=>  Start address 4
=>  Transfer rate: 919176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp38.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1600/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1593 W:0    | mipstx39/jmr3904: sp40.exe
Result: invalid   
Time: 0:00:00.259092 sp40.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp40.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp40.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14b68 lma 0
=>  Loading section .init, size 0x40 lma 14b68
=>  Loading section .fini, size 0x20 lma 14ba8
=>  Loading section .rodata, size 0x266c lma 14bc8
=>  Loading section .eh_frame_hdr, size 0xcfc lma 17234
=>  Loading section .eh_frame, size 0x42bc lma 17f30
=>  Loading section .ctors, size 0x8 lma 1c1ec
=>  Loading section .dtors, size 0x8 lma 1c1f4
=>  Loading section .got2, size 0x2c lma 1c1fc
=>  Loading section .rtemsroset, size 0x74 lma 1c228
=>  Loading section .data, size 0x3ac lma 1c2a0
=>  Loading section .sdata, size 0xad lma 1c650
=>  Start address 4
=>  Transfer rate: 931752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp40.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1601/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1594 W:0    | mipstx39/jmr3904: sp41.exe
Result: invalid   
Time: 0:00:00.267649 sp41.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp41.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp41.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ea8 lma 0
=>  Loading section .init, size 0x40 lma 13ea8
=>  Loading section .fini, size 0x20 lma 13ee8
=>  Loading section .rodata, size 0x2070 lma 13f08
=>  Loading section .eh_frame_hdr, size 0xcac lma 15f78
=>  Loading section .eh_frame, size 0x4198 lma 16c24
=>  Loading section .ctors, size 0x8 lma 1adbc
=>  Loading section .dtors, size 0x8 lma 1adc4
=>  Loading section .got2, size 0x2c lma 1adcc
=>  Loading section .rtemsroset, size 0x70 lma 1adf8
=>  Loading section .data, size 0x364 lma 1ae68
=>  Loading section .sdata, size 0xb1 lma 1b1d0
=>  Start address 4
=>  Transfer rate: 889832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp41.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1602/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1594 W:0    | mipstx39/jmr3904: sp42.exe
Result: invalid   
Time: 0:00:00.297989 sp42.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp42.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp42.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1699c lma 0
=>  Loading section .init, size 0x40 lma 1699c
=>  Loading section .fini, size 0x20 lma 169dc
=>  Loading section .rodata, size 0x2865 lma 16a00
=>  Loading section .eh_frame_hdr, size 0xe4c lma 19268
=>  Loading section .eh_frame, size 0x4a10 lma 1a0b4
=>  Loading section .ctors, size 0x8 lma 1eac4
=>  Loading section .dtors, size 0x8 lma 1eacc
=>  Loading section .got2, size 0x2c lma 1ead4
=>  Loading section .rtemsroset, size 0x74 lma 1eb00
=>  Loading section .data, size 0x4e4 lma 1eb78
=>  Loading section .sdata, size 0xb5 lma 1f060
=>  Start address 4
=>  Transfer rate: 1017904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp42.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1603/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1594 W:0    | mipstx39/jmr3904: sp43.exe
Result: invalid   
Time: 0:00:00.268175 sp43.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp43.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp43.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17114 lma 0
=>  Loading section .init, size 0x40 lma 17114
=>  Loading section .fini, size 0x20 lma 17154
=>  Loading section .rodata, size 0x353d lma 17178
=>  Loading section .eh_frame_hdr, size 0xe2c lma 1a6b8
=>  Loading section .eh_frame, size 0x4998 lma 1b4e4
=>  Loading section .ctors, size 0x8 lma 1fe7c
=>  Loading section .dtors, size 0x8 lma 1fe84
=>  Loading section .got2, size 0x2c lma 1fe8c
=>  Loading section .rtemsroset, size 0x74 lma 1feb8
=>  Loading section .data, size 0x3c4 lma 1ff30
=>  Loading section .sdata, size 0xb1 lma 202f8
=>  Start address 4
=>  Transfer rate: 1055952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp43.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1604/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1594 W:0    | mipstx39/jmr3904: sp44.exe
Result: invalid   
Time: 0:00:00.284018 sp44.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp44.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp44.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14640 lma 0
=>  Loading section .init, size 0x40 lma 14640
=>  Loading section .fini, size 0x20 lma 14680
=>  Loading section .rodata, size 0x23dc lma 146a0
=>  Loading section .eh_frame_hdr, size 0xcc4 lma 16a7c
=>  Loading section .eh_frame, size 0x4258 lma 17740
=>  Loading section .ctors, size 0x8 lma 1b998
=>  Loading section .dtors, size 0x8 lma 1b9a0
=>  Loading section .got2, size 0x2c lma 1b9a8
=>  Loading section .rtemsroset, size 0x70 lma 1b9d4
=>  Loading section .data, size 0x364 lma 1ba48
=>  Loading section .sdata, size 0xad lma 1bdb0
=>  Start address 4
=>  Transfer rate: 914088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp44.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1605/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1597 W:0    | mipstx39/jmr3904: sp45.exe
Result: invalid   
Time: 0:00:00.252766 sp45.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp45.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp45.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14b88 lma 0
=>  Loading section .init, size 0x40 lma 14b88
=>  Loading section .fini, size 0x20 lma 14bc8
=>  Loading section .rodata, size 0x2570 lma 14be8
=>  Loading section .eh_frame_hdr, size 0xd04 lma 17158
=>  Loading section .eh_frame, size 0x43d0 lma 17e5c
=>  Loading section .ctors, size 0x8 lma 1c22c
=>  Loading section .dtors, size 0x8 lma 1c234
=>  Loading section .got2, size 0x2c lma 1c23c
=>  Loading section .rtemsroset, size 0x74 lma 1c268
=>  Loading section .data, size 0x398 lma 1c2e0
=>  Loading section .sdata, size 0xb1 lma 1c678
=>  Start address 4
=>  Transfer rate: 932136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp45.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1606/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1596 W:0    | mipstx39/jmr3904: sp46.exe
Result: invalid   
Time: 0:00:00.256494 sp46.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp46.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp46.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c68 lma 0
=>  Loading section .init, size 0x40 lma 14c68
=>  Loading section .fini, size 0x20 lma 14ca8
=>  Loading section .rodata, size 0x2420 lma 14cc8
=>  Loading section .eh_frame_hdr, size 0xd0c lma 170e8
=>  Loading section .eh_frame, size 0x4448 lma 17df4
=>  Loading section .ctors, size 0x8 lma 1c23c
=>  Loading section .dtors, size 0x8 lma 1c244
=>  Loading section .got2, size 0x2c lma 1c24c
=>  Loading section .rtemsroset, size 0x74 lma 1c278
=>  Loading section .data, size 0x394 lma 1c2f0
=>  Loading section .sdata, size 0xb1 lma 1c688
=>  Start address 4
=>  Transfer rate: 932232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp46.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1607/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1597 W:0    | mipstx39/jmr3904: sp47.exe
Result: invalid   
Time: 0:00:00.305123 sp47.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp47.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp47.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x141a0 lma 0
=>  Loading section .init, size 0x40 lma 141a0
=>  Loading section .fini, size 0x20 lma 141e0
=>  Loading section .rodata, size 0x1fc4 lma 14200
=>  Loading section .eh_frame_hdr, size 0xcb4 lma 161c4
=>  Loading section .eh_frame, size 0x41e0 lma 16e78
=>  Loading section .ctors, size 0x8 lma 1b058
=>  Loading section .dtors, size 0x8 lma 1b060
=>  Loading section .got2, size 0x2c lma 1b068
=>  Loading section .rtemsroset, size 0x70 lma 1b094
=>  Loading section .data, size 0x368 lma 1b108
=>  Loading section .sdata, size 0xb1 lma 1b470
=>  Start address 4
=>  Transfer rate: 895208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp47.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1608/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1597 W:0    | mipstx39/jmr3904: sp48.exe
Result: invalid   
Time: 0:00:00.301507 sp48.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp48.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp48.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14164 lma 0
=>  Loading section .init, size 0x40 lma 14164
=>  Loading section .fini, size 0x20 lma 141a4
=>  Loading section .rodata, size 0x23d0 lma 141c8
=>  Loading section .eh_frame_hdr, size 0xccc lma 16598
=>  Loading section .eh_frame, size 0x42f4 lma 17264
=>  Loading section .ctors, size 0x8 lma 1b558
=>  Loading section .dtors, size 0x8 lma 1b560
=>  Loading section .got2, size 0x2c lma 1b568
=>  Loading section .rtemsroset, size 0x70 lma 1b594
=>  Loading section .data, size 0x378 lma 1b608
=>  Loading section .sdata, size 0xa0 lma 1b980
=>  Start address 4
=>  Transfer rate: 905408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp48.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1609/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1602 W:0    | mipstx39/jmr3904: sp49.exe
Result: invalid   
Time: 0:00:00.315438 sp49.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp49.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp49.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13878 lma 0
=>  Loading section .init, size 0x40 lma 13878
=>  Loading section .fini, size 0x20 lma 138b8
=>  Loading section .rodata, size 0x2350 lma 138d8
=>  Loading section .eh_frame_hdr, size 0xc9c lma 15c28
=>  Loading section .eh_frame, size 0x411c lma 168c4
=>  Loading section .ctors, size 0x8 lma 1a9e0
=>  Loading section .dtors, size 0x8 lma 1a9e8
=>  Loading section .got2, size 0x2c lma 1a9f0
=>  Loading section .rtemsroset, size 0x70 lma 1aa1c
=>  Loading section .data, size 0x378 lma 1aa90
=>  Loading section .sdata, size 0x9d lma 1ae08
=>  Start address 4
=>  Transfer rate: 881928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp49.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1610/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1602 W:0    | mipstx39/jmr3904: sp50.exe
Result: invalid   
Time: 0:00:00.255766 sp50.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp50.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp50.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x149c8 lma 0
=>  Loading section .init, size 0x40 lma 149c8
=>  Loading section .fini, size 0x20 lma 14a08
=>  Loading section .rodata, size 0x23bc lma 14a28
=>  Loading section .eh_frame_hdr, size 0xcfc lma 16de4
=>  Loading section .eh_frame, size 0x43e4 lma 17ae0
=>  Loading section .ctors, size 0x8 lma 1bec4
=>  Loading section .dtors, size 0x8 lma 1becc
=>  Loading section .got2, size 0x2c lma 1bed4
=>  Loading section .rtemsroset, size 0x74 lma 1bf00
=>  Loading section .data, size 0x394 lma 1bf78
=>  Loading section .sdata, size 0xb1 lma 1c310
=>  Start address 4
=>  Transfer rate: 925128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp50.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1611/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1603 W:0    | mipstx39/jmr3904: sp51.exe
Result: invalid   
Time: 0:00:00.287791 sp51.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp51.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp51.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x149d8 lma 0
=>  Loading section .init, size 0x40 lma 149d8
=>  Loading section .fini, size 0x20 lma 14a18
=>  Loading section .rodata, size 0x2470 lma 14a38
=>  Loading section .eh_frame_hdr, size 0xcec lma 16ea8
=>  Loading section .eh_frame, size 0x43d4 lma 17b94
=>  Loading section .ctors, size 0x8 lma 1bf68
=>  Loading section .dtors, size 0x8 lma 1bf70
=>  Loading section .got2, size 0x2c lma 1bf78
=>  Loading section .rtemsroset, size 0x70 lma 1bfa4
=>  Loading section .data, size 0x378 lma 1c018
=>  Loading section .sdata, size 0x9d lma 1c390
=>  Start address 4
=>  Transfer rate: 926024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp51.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1612/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1605 W:0    | mipstx39/jmr3904: sp52.exe
Result: invalid   
Time: 0:00:00.276699 sp52.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp52.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp52.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ca8 lma 0
=>  Loading section .init, size 0x40 lma 14ca8
=>  Loading section .fini, size 0x20 lma 14ce8
=>  Loading section .rodata, size 0x24f4 lma 14d08
=>  Loading section .eh_frame_hdr, size 0xd24 lma 171fc
=>  Loading section .eh_frame, size 0x4474 lma 17f20
=>  Loading section .ctors, size 0x8 lma 1c394
=>  Loading section .dtors, size 0x8 lma 1c39c
=>  Loading section .got2, size 0x2c lma 1c3a4
=>  Loading section .rtemsroset, size 0x74 lma 1c3d0
=>  Loading section .data, size 0x3c0 lma 1c448
=>  Loading section .sdata, size 0xc1 lma 1c808
=>  Start address 4
=>  Transfer rate: 935464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp52.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1613/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1603 W:0    | mipstx39/jmr3904: sp53.exe
Result: invalid   
Time: 0:00:00.285106 sp53.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp53.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp53.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15208 lma 0
=>  Loading section .init, size 0x40 lma 15208
=>  Loading section .fini, size 0x20 lma 15248
=>  Loading section .rodata, size 0x2514 lma 15268
=>  Loading section .eh_frame_hdr, size 0xd44 lma 1777c
=>  Loading section .eh_frame, size 0x4580 lma 184c0
=>  Loading section .ctors, size 0x8 lma 1ca40
=>  Loading section .dtors, size 0x8 lma 1ca48
=>  Loading section .got2, size 0x2c lma 1ca50
=>  Loading section .rtemsroset, size 0x74 lma 1ca7c
=>  Loading section .data, size 0x3c0 lma 1caf0
=>  Loading section .sdata, size 0xc1 lma 1ceb0
=>  Start address 4
=>  Transfer rate: 949128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp53.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1614/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1605 W:0    | mipstx39/jmr3904: sp54.exe
Result: invalid   
Time: 0:00:00.252255 sp54.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp54.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp54.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13194 lma 0
=>  Loading section .init, size 0x40 lma 13194
=>  Loading section .fini, size 0x20 lma 131d4
=>  Loading section .rodata, size 0x238c lma 131f8
=>  Loading section .eh_frame_hdr, size 0xc14 lma 15584
=>  Loading section .eh_frame, size 0x3e4c lma 16198
=>  Loading section .ctors, size 0x8 lma 19fe4
=>  Loading section .dtors, size 0x8 lma 19fec
=>  Loading section .got2, size 0x2c lma 19ff4
=>  Loading section .rtemsroset, size 0x74 lma 1a020
=>  Loading section .data, size 0x498 lma 1a098
=>  Loading section .sdata, size 0x86 lma 1a530
=>  Start address 4
=>  Transfer rate: 863600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp54.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1615/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1606 W:0    | mipstx39/jmr3904: sp55.exe
Result: invalid   
Time: 0:00:00.253284 sp55.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp55.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp55.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x140d8 lma 0
=>  Loading section .init, size 0x40 lma 140d8
=>  Loading section .fini, size 0x20 lma 14118
=>  Loading section .rodata, size 0x2430 lma 14138
=>  Loading section .eh_frame_hdr, size 0xcd4 lma 16568
=>  Loading section .eh_frame, size 0x4320 lma 1723c
=>  Loading section .ctors, size 0x8 lma 1b55c
=>  Loading section .dtors, size 0x8 lma 1b564
=>  Loading section .got2, size 0x2c lma 1b56c
=>  Loading section .rtemsroset, size 0x70 lma 1b598
=>  Loading section .data, size 0x378 lma 1b608
=>  Loading section .sdata, size 0x9d lma 1b980
=>  Start address 4
=>  Transfer rate: 905448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp55.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1616/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1609 W:0    | mipstx39/jmr3904: sp56.exe
Result: invalid   
Time: 0:00:00.283743 sp56.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp56.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp56.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13358 lma 0
=>  Loading section .init, size 0x40 lma 13358
=>  Loading section .fini, size 0x20 lma 13398
=>  Loading section .rodata, size 0x2368 lma 133b8
=>  Loading section .eh_frame_hdr, size 0xc44 lma 15720
=>  Loading section .eh_frame, size 0x3f7c lma 16364
=>  Loading section .ctors, size 0x8 lma 1a2e0
=>  Loading section .dtors, size 0x8 lma 1a2e8
=>  Loading section .got2, size 0x2c lma 1a2f0
=>  Loading section .rtemsroset, size 0x70 lma 1a31c
=>  Loading section .data, size 0x3a0 lma 1a390
=>  Loading section .sdata, size 0x99 lma 1a730
=>  Start address 4
=>  Transfer rate: 867880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp56.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1617/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1608 W:0    | mipstx39/jmr3904: sp57.exe
Result: invalid   
Time: 0:00:00.277453 sp57.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp57.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp57.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144c8 lma 0
=>  Loading section .init, size 0x40 lma 144c8
=>  Loading section .fini, size 0x20 lma 14508
=>  Loading section .rodata, size 0x24a0 lma 14528
=>  Loading section .eh_frame_hdr, size 0xcbc lma 169c8
=>  Loading section .eh_frame, size 0x4208 lma 17684
=>  Loading section .ctors, size 0x8 lma 1b88c
=>  Loading section .dtors, size 0x8 lma 1b894
=>  Loading section .got2, size 0x2c lma 1b89c
=>  Loading section .rtemsroset, size 0x70 lma 1b8c8
=>  Loading section .data, size 0x364 lma 1b938
=>  Loading section .sdata, size 0xb1 lma 1bca0
=>  Start address 4
=>  Transfer rate: 911976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp57.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1618/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1612 W:0    | mipstx39/jmr3904: sp58.exe
Result: invalid   
Time: 0:00:00.255360 sp58.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp58.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp58.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x130b8 lma 0
=>  Loading section .init, size 0x40 lma 130b8
=>  Loading section .fini, size 0x20 lma 130f8
=>  Loading section .rodata, size 0x1f68 lma 13118
=>  Loading section .eh_frame_hdr, size 0xc14 lma 15080
=>  Loading section .eh_frame, size 0x3ed0 lma 15c94
=>  Loading section .ctors, size 0x8 lma 19b64
=>  Loading section .dtors, size 0x8 lma 19b6c
=>  Loading section .got2, size 0x2c lma 19b74
=>  Loading section .rtemsroset, size 0x6c lma 19ba0
=>  Loading section .data, size 0x34c lma 19c10
=>  Loading section .sdata, size 0x99 lma 19f5c
=>  Start address 4
=>  Transfer rate: 851848 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp58.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1619/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1612 W:0    | mipstx39/jmr3904: sp59.exe
Result: invalid   
Time: 0:00:00.261171 sp59.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp59.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp59.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14fa8 lma 0
=>  Loading section .init, size 0x40 lma 14fa8
=>  Loading section .fini, size 0x20 lma 14fe8
=>  Loading section .rodata, size 0x25f8 lma 15008
=>  Loading section .eh_frame_hdr, size 0xd5c lma 17600
=>  Loading section .eh_frame, size 0x4500 lma 1835c
=>  Loading section .ctors, size 0x8 lma 1c85c
=>  Loading section .dtors, size 0x8 lma 1c864
=>  Loading section .got2, size 0x2c lma 1c86c
=>  Loading section .rtemsroset, size 0x74 lma 1c898
=>  Loading section .data, size 0x394 lma 1c910
=>  Loading section .sdata, size 0xb5 lma 1cca8
=>  Start address 4
=>  Transfer rate: 944808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp59.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1620/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1614 W:0    | mipstx39/jmr3904: sp60.exe
Result: invalid   
Time: 0:00:00.268074 sp60.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp60.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp60.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14948 lma 0
=>  Loading section .init, size 0x40 lma 14948
=>  Loading section .fini, size 0x20 lma 14988
=>  Loading section .rodata, size 0x24e8 lma 149a8
=>  Loading section .eh_frame_hdr, size 0xcdc lma 16e90
=>  Loading section .eh_frame, size 0x4330 lma 17b6c
=>  Loading section .ctors, size 0x8 lma 1be9c
=>  Loading section .dtors, size 0x8 lma 1bea4
=>  Loading section .got2, size 0x2c lma 1beac
=>  Loading section .rtemsroset, size 0x74 lma 1bed8
=>  Loading section .data, size 0x394 lma 1bf50
=>  Loading section .sdata, size 0xb1 lma 1c2e8
=>  Start address 4
=>  Transfer rate: 924808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp60.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1621/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1614 W:0    | mipstx39/jmr3904: sp62.exe
Result: invalid   
Time: 0:00:00.262407 sp62.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp62.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp62.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15a40 lma 0
=>  Loading section .init, size 0x40 lma 15a40
=>  Loading section .fini, size 0x20 lma 15a80
=>  Loading section .rodata, size 0x25ea lma 15aa0
=>  Loading section .eh_frame_hdr, size 0xdb4 lma 1808c
=>  Loading section .eh_frame, size 0x47a4 lma 18e40
=>  Loading section .ctors, size 0x8 lma 1d5e4
=>  Loading section .dtors, size 0x8 lma 1d5ec
=>  Loading section .got2, size 0x2c lma 1d5f4
=>  Loading section .rtemsroset, size 0x74 lma 1d620
=>  Loading section .data, size 0x3a0 lma 1d698
=>  Loading section .sdata, size 0xb5 lma 1da38
=>  Start address 4
=>  Transfer rate: 972600 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp62.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1622/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1614 W:0    | mipstx39/jmr3904: sp63.exe
Result: invalid   
Time: 0:00:00.260649 sp63.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp63.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp63.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13318 lma 0
=>  Loading section .init, size 0x40 lma 13318
=>  Loading section .fini, size 0x20 lma 13358
=>  Loading section .rodata, size 0x2020 lma 13378
=>  Loading section .eh_frame_hdr, size 0xc14 lma 15398
=>  Loading section .eh_frame, size 0x3f08 lma 15fac
=>  Loading section .ctors, size 0x8 lma 19eb4
=>  Loading section .dtors, size 0x8 lma 19ebc
=>  Loading section .got2, size 0x2c lma 19ec4
=>  Loading section .rtemsroset, size 0x6c lma 19ef0
=>  Loading section .data, size 0x34c lma 19f60
=>  Loading section .sdata, size 0x99 lma 1a2ac
=>  Start address 4
=>  Transfer rate: 858632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp63.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1623/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1614 W:0    | mipstx39/jmr3904: sp64.exe
Result: invalid   
Time: 0:00:00.263091 sp64.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp64.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp64.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14638 lma 0
=>  Loading section .init, size 0x40 lma 14638
=>  Loading section .fini, size 0x20 lma 14678
=>  Loading section .rodata, size 0x206c lma 14698
=>  Loading section .eh_frame_hdr, size 0xd2c lma 16704
=>  Loading section .eh_frame, size 0x44a8 lma 17430
=>  Loading section .ctors, size 0x8 lma 1b8d8
=>  Loading section .dtors, size 0x8 lma 1b8e0
=>  Loading section .got2, size 0x2c lma 1b8e8
=>  Loading section .rtemsroset, size 0x70 lma 1b914
=>  Loading section .data, size 0x3a8 lma 1b988
=>  Loading section .sdata, size 0x9d lma 1bd30
=>  Start address 4
=>  Transfer rate: 912968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp64.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1624/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1614 W:0    | mipstx39/jmr3904: sp65.exe
Result: invalid   
Time: 0:00:00.311521 sp65.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp65.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp65.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x161c0 lma 0
=>  Loading section .init, size 0x40 lma 161c0
=>  Loading section .fini, size 0x20 lma 16200
=>  Loading section .rodata, size 0x24c2 lma 16220
=>  Loading section .eh_frame_hdr, size 0xdcc lma 186e4
=>  Loading section .eh_frame, size 0x48a4 lma 194b0
=>  Loading section .ctors, size 0x8 lma 1dd54
=>  Loading section .dtors, size 0x8 lma 1dd5c
=>  Loading section .got2, size 0x2c lma 1dd64
=>  Loading section .rtemsroset, size 0x74 lma 1dd90
=>  Loading section .data, size 0x3a0 lma 1de08
=>  Loading section .sdata, size 0xb5 lma 1e1a8
=>  Start address 4
=>  Transfer rate: 987832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp65.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1625/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1614 W:0    | mipstx39/jmr3904: sp66.exe
Result: invalid   
Time: 0:00:00.254296 sp66.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp66.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp66.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x161c0 lma 0
=>  Loading section .init, size 0x40 lma 161c0
=>  Loading section .fini, size 0x20 lma 16200
=>  Loading section .rodata, size 0x24ca lma 16220
=>  Loading section .eh_frame_hdr, size 0xdcc lma 186ec
=>  Loading section .eh_frame, size 0x48a8 lma 194b8
=>  Loading section .ctors, size 0x8 lma 1dd60
=>  Loading section .dtors, size 0x8 lma 1dd68
=>  Loading section .got2, size 0x2c lma 1dd70
=>  Loading section .rtemsroset, size 0x74 lma 1dd9c
=>  Loading section .data, size 0x3a0 lma 1de10
=>  Loading section .sdata, size 0xb5 lma 1e1b0
=>  Start address 4
=>  Transfer rate: 987928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp66.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1626/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1617 W:0    | mipstx39/jmr3904: sp67.exe
Result: invalid   
Time: 0:00:00.252398 sp67.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp67.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp67.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14968 lma 0
=>  Loading section .init, size 0x40 lma 14968
=>  Loading section .fini, size 0x20 lma 149a8
=>  Loading section .rodata, size 0x2498 lma 149c8
=>  Loading section .eh_frame_hdr, size 0xcfc lma 16e60
=>  Loading section .eh_frame, size 0x4394 lma 17b5c
=>  Loading section .ctors, size 0x8 lma 1bef0
=>  Loading section .dtors, size 0x8 lma 1bef8
=>  Loading section .got2, size 0x2c lma 1bf00
=>  Loading section .rtemsroset, size 0x74 lma 1bf2c
=>  Loading section .data, size 0x394 lma 1bfa0
=>  Loading section .sdata, size 0xb1 lma 1c338
=>  Start address 4
=>  Transfer rate: 925480 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp67.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1627/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1620 W:0    | mipstx39/jmr3904: sp68.exe
Result: invalid   
Time: 0:00:00.258818 sp68.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp68.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp68.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17ee8 lma 0
=>  Loading section .init, size 0x40 lma 17ee8
=>  Loading section .fini, size 0x20 lma 17f28
=>  Loading section .rodata, size 0x2854 lma 17f48
=>  Loading section .eh_frame_hdr, size 0xed4 lma 1a79c
=>  Loading section .eh_frame, size 0x5004 lma 1b670
=>  Loading section .ctors, size 0x8 lma 20674
=>  Loading section .dtors, size 0x8 lma 2067c
=>  Loading section .got2, size 0x2c lma 20684
=>  Loading section .rtemsroset, size 0x84 lma 206b0
=>  Loading section .data, size 0x454 lma 20738
=>  Loading section .sdata, size 0xb5 lma 20b90
=>  Start address 4
=>  Transfer rate: 1073640 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp68.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1628/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1621 W:0    | mipstx39/jmr3904: sp69.exe
Result: invalid   
Time: 0:00:00.255946 sp69.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp69.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp69.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15588 lma 0
=>  Loading section .init, size 0x40 lma 15588
=>  Loading section .fini, size 0x20 lma 155c8
=>  Loading section .rodata, size 0x2828 lma 155e8
=>  Loading section .eh_frame_hdr, size 0xd1c lma 17e10
=>  Loading section .eh_frame, size 0x451c lma 18b2c
=>  Loading section .ctors, size 0x8 lma 1d048
=>  Loading section .dtors, size 0x8 lma 1d050
=>  Loading section .got2, size 0x2c lma 1d058
=>  Loading section .rtemsroset, size 0x74 lma 1d084
=>  Loading section .data, size 0x394 lma 1d0f8
=>  Loading section .sdata, size 0xb1 lma 1d490
=>  Start address 4
=>  Transfer rate: 961000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp69.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1629/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1621 W:0    | mipstx39/jmr3904: sp70.exe
Result: invalid   
Time: 0:00:00.287021 sp70.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp70.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp70.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14874 lma 0
=>  Loading section .init, size 0x40 lma 14874
=>  Loading section .fini, size 0x20 lma 148b4
=>  Loading section .rodata, size 0x238c lma 148d8
=>  Loading section .eh_frame_hdr, size 0xcfc lma 16c64
=>  Loading section .eh_frame, size 0x43b8 lma 17960
=>  Loading section .ctors, size 0x8 lma 1bd18
=>  Loading section .dtors, size 0x8 lma 1bd20
=>  Loading section .got2, size 0x2c lma 1bd28
=>  Loading section .rtemsroset, size 0x70 lma 1bd54
=>  Loading section .data, size 0x364 lma 1bdc8
=>  Loading section .sdata, size 0xb4 lma 1c130
=>  Start address 4
=>  Transfer rate: 921280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp70.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1630/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1621 W:0    | mipstx39/jmr3904: sp71.exe
Result: invalid   
Time: 0:00:00.253481 sp71.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp71.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp71.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x135a4 lma 0
=>  Loading section .init, size 0x40 lma 135a4
=>  Loading section .fini, size 0x20 lma 135e4
=>  Loading section .rodata, size 0x2310 lma 13608
=>  Loading section .eh_frame_hdr, size 0xc4c lma 15918
=>  Loading section .eh_frame, size 0x4050 lma 16564
=>  Loading section .ctors, size 0x8 lma 1a5b4
=>  Loading section .dtors, size 0x8 lma 1a5bc
=>  Loading section .got2, size 0x2c lma 1a5c4
=>  Loading section .rtemsroset, size 0x70 lma 1a5f0
=>  Loading section .data, size 0x378 lma 1a660
=>  Loading section .sdata, size 0x9c lma 1a9d8
=>  Start address 4
=>  Transfer rate: 873344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp71.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1631/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1622 W:0    | mipstx39/jmr3904: sp72.exe
Result: invalid   
Time: 0:00:00.316148 sp72.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp72.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp72.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15248 lma 0
=>  Loading section .init, size 0x40 lma 15248
=>  Loading section .fini, size 0x20 lma 15288
=>  Loading section .rodata, size 0x2470 lma 152a8
=>  Loading section .eh_frame_hdr, size 0xd5c lma 17718
=>  Loading section .eh_frame, size 0x4574 lma 18474
=>  Loading section .ctors, size 0x8 lma 1c9e8
=>  Loading section .dtors, size 0x8 lma 1c9f0
=>  Loading section .got2, size 0x2c lma 1c9f8
=>  Loading section .rtemsroset, size 0x74 lma 1ca24
=>  Loading section .data, size 0x394 lma 1ca98
=>  Loading section .sdata, size 0xb5 lma 1ce30
=>  Start address 4
=>  Transfer rate: 947976 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp72.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1632/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1621 W:0    | mipstx39/jmr3904: sp73.exe
Result: invalid   
Time: 0:00:00.298028 sp73.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp73.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp73.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ea8 lma 0
=>  Loading section .init, size 0x40 lma 14ea8
=>  Loading section .fini, size 0x20 lma 14ee8
=>  Loading section .rodata, size 0x2585 lma 14f08
=>  Loading section .eh_frame_hdr, size 0xd04 lma 17490
=>  Loading section .eh_frame, size 0x43a4 lma 18194
=>  Loading section .ctors, size 0x8 lma 1c538
=>  Loading section .dtors, size 0x8 lma 1c540
=>  Loading section .got2, size 0x2c lma 1c548
=>  Loading section .rtemsroset, size 0x70 lma 1c574
=>  Loading section .data, size 0x390 lma 1c5e8
=>  Loading section .sdata, size 0xc1 lma 1c978
=>  Start address 4
=>  Transfer rate: 938384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp73.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1633/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1622 W:0    | mipstx39/jmr3904: sp74.exe
Result: invalid   
Time: 0:00:00.255893 sp74.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp74.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp74.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13098 lma 0
=>  Loading section .init, size 0x40 lma 13098
=>  Loading section .fini, size 0x20 lma 130d8
=>  Loading section .rodata, size 0x2338 lma 130f8
=>  Loading section .eh_frame_hdr, size 0xc14 lma 15430
=>  Loading section .eh_frame, size 0x3e88 lma 16044
=>  Loading section .ctors, size 0x8 lma 19ecc
=>  Loading section .dtors, size 0x8 lma 19ed4
=>  Loading section .got2, size 0x2c lma 19edc
=>  Loading section .rtemsroset, size 0x6c lma 19f08
=>  Loading section .data, size 0x348 lma 19f78
=>  Loading section .sdata, size 0x99 lma 1a2c0
=>  Start address 4
=>  Transfer rate: 858792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp74.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1634/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1627 W:0    | mipstx39/jmr3904: sp75.exe
Result: invalid   
Time: 0:00:00.269144 sp75.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp75.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp75.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ae8 lma 0
=>  Loading section .init, size 0x40 lma 14ae8
=>  Loading section .fini, size 0x20 lma 14b28
=>  Loading section .rodata, size 0x23c8 lma 14b48
=>  Loading section .eh_frame_hdr, size 0xd24 lma 16f10
=>  Loading section .eh_frame, size 0x4434 lma 17c34
=>  Loading section .ctors, size 0x8 lma 1c068
=>  Loading section .dtors, size 0x8 lma 1c070
=>  Loading section .got2, size 0x2c lma 1c078
=>  Loading section .rtemsroset, size 0x74 lma 1c0a4
=>  Loading section .data, size 0x394 lma 1c118
=>  Loading section .sdata, size 0xb5 lma 1c4b0
=>  Start address 4
=>  Transfer rate: 928520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp75.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1635/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1628 W:0    | mipstx39/jmr3904: sp76.exe
Result: invalid   
Time: 0:00:00.270929 sp76.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp76.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp76.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b0c lma 0
=>  Loading section .init, size 0x40 lma 13b0c
=>  Loading section .fini, size 0x20 lma 13b4c
=>  Loading section .rodata, size 0x24e9 lma 13b70
=>  Loading section .eh_frame_hdr, size 0xc7c lma 1605c
=>  Loading section .eh_frame, size 0x40b4 lma 16cd8
=>  Loading section .ctors, size 0x8 lma 1ad8c
=>  Loading section .dtors, size 0x8 lma 1ad94
=>  Loading section .got2, size 0x2c lma 1ad9c
=>  Loading section .rtemsroset, size 0x6c lma 1adc8
=>  Loading section .data, size 0x348 lma 1ae38
=>  Loading section .sdata, size 0x99 lma 1b180
=>  Start address 4
=>  Transfer rate: 888944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp76.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1636/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1629 W:0    | mipstx39/jmr3904: sp77.exe
Result: invalid   
Time: 0:00:00.263015 sp77.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sp77.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sp77.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x143e8 lma 0
=>  Loading section .init, size 0x40 lma 143e8
=>  Loading section .fini, size 0x20 lma 14428
=>  Loading section .rodata, size 0x22c4 lma 14448
=>  Loading section .eh_frame_hdr, size 0xcec lma 1670c
=>  Loading section .eh_frame, size 0x42ec lma 173f8
=>  Loading section .ctors, size 0x8 lma 1b6e4
=>  Loading section .dtors, size 0x8 lma 1b6ec
=>  Loading section .got2, size 0x2c lma 1b6f4
=>  Loading section .rtemsroset, size 0x74 lma 1b720
=>  Loading section .data, size 0x398 lma 1b798
=>  Loading section .sdata, size 0xb5 lma 1bb30
=>  Start address 4
=>  Transfer rate: 909064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp77.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1637/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1628 W:0    | mipstx39/jmr3904: spassoc01.exe
Result: invalid   
Time: 0:00:00.282916 spassoc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spassoc01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spassoc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15120 lma 0
=>  Loading section .init, size 0x40 lma 15120
=>  Loading section .fini, size 0x20 lma 15160
=>  Loading section .rodata, size 0x2774 lma 15180
=>  Loading section .eh_frame_hdr, size 0xcec lma 178f4
=>  Loading section .eh_frame, size 0x4460 lma 185e0
=>  Loading section .ctors, size 0x8 lma 1ca40
=>  Loading section .dtors, size 0x8 lma 1ca48
=>  Loading section .got2, size 0x2c lma 1ca50
=>  Loading section .rtemsroset, size 0x70 lma 1ca7c
=>  Loading section .data, size 0x390 lma 1caf0
=>  Loading section .sdata, size 0xa9 lma 1ce80
=>  Start address 4
=>  Transfer rate: 948520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spassoc01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1638/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1630 W:0    | mipstx39/jmr3904: spatomic01.exe
Result: invalid   
Time: 0:00:00.259773 spatomic01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spatomic01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spatomic01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x139f8 lma 0
=>  Loading section .init, size 0x40 lma 139f8
=>  Loading section .fini, size 0x20 lma 13a38
=>  Loading section .rodata, size 0x2234 lma 13a58
=>  Loading section .eh_frame_hdr, size 0xc24 lma 15c8c
=>  Loading section .eh_frame, size 0x3f28 lma 168b0
=>  Loading section .ctors, size 0x8 lma 1a7d8
=>  Loading section .dtors, size 0x8 lma 1a7e0
=>  Loading section .got2, size 0x2c lma 1a7e8
=>  Loading section .rtemsroset, size 0x6c lma 1a814
=>  Loading section .data, size 0x34c lma 1a880
=>  Loading section .sdata, size 0x9d lma 1abcc
=>  Start address 4
=>  Transfer rate: 877384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spatomic01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1639/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1631 W:0    | mipstx39/jmr3904: spcache01.exe
Result: invalid   
Time: 0:00:00.253537 spcache01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spcache01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spcache01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15dac lma 0
=>  Loading section .init, size 0x40 lma 15dac
=>  Loading section .fini, size 0x20 lma 15dec
=>  Loading section .rodata, size 0x2710 lma 15e10
=>  Loading section .eh_frame_hdr, size 0xd2c lma 18520
=>  Loading section .eh_frame, size 0x4398 lma 1924c
=>  Loading section .ctors, size 0x8 lma 1d5e4
=>  Loading section .dtors, size 0x8 lma 1d5ec
=>  Loading section .got2, size 0x2c lma 1d5f4
=>  Loading section .rtemsroset, size 0x74 lma 1d620
=>  Loading section .data, size 0x368 lma 1d698
=>  Loading section .sdata, size 0xa9 lma 1da00
=>  Start address 4
=>  Transfer rate: 972040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcache01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1640/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1631 W:0    | mipstx39/jmr3904: spcbssched01.exe
Result: invalid   
Time: 0:00:00.261502 spcbssched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spcbssched01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spcbssched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x154e8 lma 0
=>  Loading section .init, size 0x40 lma 154e8
=>  Loading section .fini, size 0x20 lma 15528
=>  Loading section .rodata, size 0x2659 lma 15548
=>  Loading section .eh_frame_hdr, size 0xd9c lma 17ba4
=>  Loading section .eh_frame, size 0x4590 lma 18940
=>  Loading section .ctors, size 0x8 lma 1ced0
=>  Loading section .dtors, size 0x8 lma 1ced8
=>  Loading section .got2, size 0x2c lma 1cee0
=>  Loading section .rtemsroset, size 0x70 lma 1cf0c
=>  Loading section .data, size 0x510 lma 1cf80
=>  Loading section .sdata, size 0xb9 lma 1d490
=>  Start address 4
=>  Transfer rate: 961040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcbssched01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1641/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1632 W:0    | mipstx39/jmr3904: spcbssched02.exe
Result: invalid   
Time: 0:00:00.253631 spcbssched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spcbssched02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spcbssched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17354 lma 0
=>  Loading section .init, size 0x40 lma 17354
=>  Loading section .fini, size 0x20 lma 17394
=>  Loading section .rodata, size 0x2c40 lma 173b8
=>  Loading section .eh_frame_hdr, size 0xe5c lma 19ff8
=>  Loading section .eh_frame, size 0x4c28 lma 1ae54
=>  Loading section .tdata, size 0xc lma 1fa7c
=>  Loading section .ctors, size 0x8 lma 1fa88
=>  Loading section .dtors, size 0x8 lma 1fa90
=>  Loading section .got2, size 0x2c lma 1fa98
=>  Loading section .rtemsroset, size 0x74 lma 1fac4
=>  Loading section .data, size 0x3a0 lma 1fb38
=>  Loading section .sdata, size 0xa9 lma 1fed8
=>  Start address 4
=>  Transfer rate: 1047528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcbssched02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1642/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1631 W:0    | mipstx39/jmr3904: spcbssched03.exe
Result: invalid   
Time: 0:00:00.276053 spcbssched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spcbssched03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spcbssched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16e38 lma 0
=>  Loading section .init, size 0x40 lma 16e38
=>  Loading section .fini, size 0x20 lma 16e78
=>  Loading section .rodata, size 0x2795 lma 16e98
=>  Loading section .eh_frame_hdr, size 0xe74 lma 19630
=>  Loading section .eh_frame, size 0x4bf0 lma 1a4a4
=>  Loading section .tdata, size 0xc lma 1f094
=>  Loading section .ctors, size 0x8 lma 1f0a0
=>  Loading section .dtors, size 0x8 lma 1f0a8
=>  Loading section .got2, size 0x2c lma 1f0b0
=>  Loading section .rtemsroset, size 0x74 lma 1f0dc
=>  Loading section .data, size 0x408 lma 1f150
=>  Loading section .sdata, size 0xa9 lma 1f558
=>  Start address 4
=>  Transfer rate: 1028080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcbssched03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1643/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1636 W:0    | mipstx39/jmr3904: spchain.exe
Result: invalid   
Time: 0:00:00.281433 spchain.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spchain.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spchain.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15c88 lma 0
=>  Loading section .init, size 0x40 lma 15c88
=>  Loading section .fini, size 0x20 lma 15cc8
=>  Loading section .rodata, size 0x2700 lma 15ce8
=>  Loading section .eh_frame_hdr, size 0xd0c lma 183e8
=>  Loading section .eh_frame, size 0x44d0 lma 190f4
=>  Loading section .ctors, size 0x8 lma 1d5c4
=>  Loading section .dtors, size 0x8 lma 1d5cc
=>  Loading section .got2, size 0x2c lma 1d5d4
=>  Loading section .rtemsroset, size 0x70 lma 1d600
=>  Loading section .data, size 0x380 lma 1d670
=>  Loading section .sdata, size 0xb9 lma 1d9f0
=>  Start address 4
=>  Transfer rate: 972104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spchain.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1644/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1638 W:0    | mipstx39/jmr3904: spclock_err01.exe
Result: invalid   
Time: 0:00:00.268760 spclock_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spclock_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spclock_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15908 lma 0
=>  Loading section .init, size 0x40 lma 15908
=>  Loading section .fini, size 0x20 lma 15948
=>  Loading section .rodata, size 0x29ec lma 15968
=>  Loading section .eh_frame_hdr, size 0xd1c lma 18354
=>  Loading section .eh_frame, size 0x43cc lma 19070
=>  Loading section .ctors, size 0x8 lma 1d43c
=>  Loading section .dtors, size 0x8 lma 1d444
=>  Loading section .got2, size 0x2c lma 1d44c
=>  Loading section .rtemsroset, size 0x70 lma 1d478
=>  Loading section .data, size 0x390 lma 1d4e8
=>  Loading section .sdata, size 0xb5 lma 1d878
=>  Start address 4
=>  Transfer rate: 969064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spclock_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1645/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1638 W:0    | mipstx39/jmr3904: spclock_err02.exe
Result: invalid   
Time: 0:00:00.270459 spclock_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spclock_err02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spclock_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15388 lma 0
=>  Loading section .init, size 0x40 lma 15388
=>  Loading section .fini, size 0x20 lma 153c8
=>  Loading section .rodata, size 0x2674 lma 153e8
=>  Loading section .eh_frame_hdr, size 0xce4 lma 17a5c
=>  Loading section .eh_frame, size 0x42b4 lma 18740
=>  Loading section .ctors, size 0x8 lma 1c9f4
=>  Loading section .dtors, size 0x8 lma 1c9fc
=>  Loading section .got2, size 0x2c lma 1ca04
=>  Loading section .rtemsroset, size 0x70 lma 1ca30
=>  Loading section .data, size 0x390 lma 1caa0
=>  Loading section .sdata, size 0xb5 lma 1ce30
=>  Start address 4
=>  Transfer rate: 948008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spclock_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1646/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1639 W:0    | mipstx39/jmr3904: spclock_todhook01.exe
Result: invalid   
Time: 0:00:00.260193 spclock_todhook01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spclock_todhook01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spclock_todhook01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x197a8 lma 0
=>  Loading section .init, size 0x40 lma 197a8
=>  Loading section .fini, size 0x20 lma 197e8
=>  Loading section .rodata, size 0x2a4e lma 19808
=>  Loading section .eh_frame_hdr, size 0xe54 lma 1c258
=>  Loading section .eh_frame, size 0x4b4c lma 1d0ac
=>  Loading section .ctors, size 0x8 lma 21bf8
=>  Loading section .dtors, size 0x8 lma 21c00
=>  Loading section .got2, size 0x2c lma 21c08
=>  Loading section .rtemsroset, size 0x70 lma 21c34
=>  Loading section .data, size 0x6e4 lma 21ca8
=>  Loading section .sdata, size 0xc8 lma 22390
=>  Start address 4
=>  Transfer rate: 1122928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spclock_todhook01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1647/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1639 W:0    | mipstx39/jmr3904: spconfig01.exe
Result: invalid   
Time: 0:00:00.275475 spconfig01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spconfig01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spconfig01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c90 lma 0
=>  Loading section .init, size 0x40 lma 12c90
=>  Loading section .fini, size 0x20 lma 12cd0
=>  Loading section .rodata, size 0x1f38 lma 12cf0
=>  Loading section .eh_frame_hdr, size 0xc54 lma 14c28
=>  Loading section .eh_frame, size 0x3e0c lma 1587c
=>  Loading section .ctors, size 0x8 lma 19688
=>  Loading section .dtors, size 0x8 lma 19690
=>  Loading section .got2, size 0x2c lma 19698
=>  Loading section .rtemsroset, size 0x6c lma 196c4
=>  Loading section .data, size 0x3e0 lma 19730
=>  Loading section .sdata, size 0x98 lma 19b10
=>  Start address 4
=>  Transfer rate: 843072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spconfig01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1648/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1639 W:0    | mipstx39/jmr3904: spconfig02.exe
Result: invalid   
Time: 0:00:00.255284 spconfig02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spconfig02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spconfig02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x10194 lma 0
=>  Loading section .init, size 0x40 lma 10194
=>  Loading section .fini, size 0x20 lma 101d4
=>  Loading section .rodata, size 0x1b07 lma 101f8
=>  Loading section .eh_frame_hdr, size 0x8e4 lma 11d00
=>  Loading section .eh_frame, size 0x3294 lma 125e4
=>  Loading section .ctors, size 0x8 lma 15878
=>  Loading section .dtors, size 0x8 lma 15880
=>  Loading section .got2, size 0x2c lma 15888
=>  Loading section .rtemsroset, size 0x80 lma 158b4
=>  Loading section .data, size 0x3a0 lma 15938
=>  Loading section .sdata, size 0x74 lma 15cd8
=>  Start address 4
=>  Transfer rate: 715288 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spconfig02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1649/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1639 W:0    | mipstx39/jmr3904: spconsole01.exe
Result: invalid   
Time: 0:00:00.281205 spconsole01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spconsole01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spconsole01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x22520 lma 0
=>  Loading section .init, size 0x40 lma 22520
=>  Loading section .fini, size 0x20 lma 22560
=>  Loading section .rodata, size 0x284a lma 22580
=>  Loading section .eh_frame_hdr, size 0x1254 lma 24dcc
=>  Loading section .eh_frame, size 0x6858 lma 26020
=>  Loading section .tdata, size 0xc lma 2c878
=>  Loading section .ctors, size 0x8 lma 2c884
=>  Loading section .dtors, size 0x8 lma 2c88c
=>  Loading section .got2, size 0x2c lma 2c894
=>  Loading section .rtemsroset, size 0x74 lma 2c8c0
=>  Loading section .data, size 0x530 lma 2c938
=>  Loading section .sdata, size 0xb9 lma 2ce68
=>  Start address 4
=>  Transfer rate: 1472728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spconsole01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1650/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1639 W:0    | mipstx39/jmr3904: spcontext01.exe
Result: invalid   
Time: 0:00:00.266552 spcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spcontext01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15328 lma 0
=>  Loading section .init, size 0x40 lma 15328
=>  Loading section .fini, size 0x20 lma 15368
=>  Loading section .rodata, size 0x2008 lma 15388
=>  Loading section .eh_frame_hdr, size 0xd54 lma 17390
=>  Loading section .eh_frame, size 0x45d0 lma 180e4
=>  Loading section .ctors, size 0x8 lma 1c6b4
=>  Loading section .dtors, size 0x8 lma 1c6bc
=>  Loading section .got2, size 0x2c lma 1c6c4
=>  Loading section .rtemsroset, size 0x74 lma 1c6f0
=>  Loading section .data, size 0x394 lma 1c768
=>  Loading section .sdata, size 0xa9 lma 1cb00
=>  Start address 4
=>  Transfer rate: 941320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1651/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1645 W:0    | mipstx39/jmr3904: spcpucounter01.exe
Result: invalid   
Time: 0:00:00.266635 spcpucounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spcpucounter01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spcpucounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c85c lma 0
=>  Loading section .init, size 0x40 lma 1c85c
=>  Loading section .fini, size 0x20 lma 1c89c
=>  Loading section .rodata, size 0x27cb lma 1c8c0
=>  Loading section .eh_frame_hdr, size 0xf64 lma 1f08c
=>  Loading section .eh_frame, size 0x5390 lma 1fff0
=>  Loading section .tdata, size 0xc lma 25380
=>  Loading section .ctors, size 0x8 lma 2538c
=>  Loading section .dtors, size 0x8 lma 25394
=>  Loading section .got2, size 0x2c lma 2539c
=>  Loading section .rtemsroset, size 0x74 lma 253c8
=>  Loading section .data, size 0x508 lma 25440
=>  Loading section .sdata, size 0xa9 lma 25948
=>  Start address 4
=>  Transfer rate: 1232704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcpucounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1652/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1647 W:0    | mipstx39/jmr3904: spcpuset01.exe
Result: invalid   
Time: 0:00:00.256557 spcpuset01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spcpuset01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spcpuset01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x135f0 lma 0
=>  Loading section .init, size 0x40 lma 135f0
=>  Loading section .fini, size 0x20 lma 13630
=>  Loading section .rodata, size 0x2078 lma 13650
=>  Loading section .eh_frame_hdr, size 0xc3c lma 156c8
=>  Loading section .eh_frame, size 0x3fc4 lma 16304
=>  Loading section .ctors, size 0x8 lma 1a2c8
=>  Loading section .dtors, size 0x8 lma 1a2d0
=>  Loading section .got2, size 0x2c lma 1a2d8
=>  Loading section .rtemsroset, size 0x6c lma 1a304
=>  Loading section .data, size 0x34c lma 1a370
=>  Loading section .sdata, size 0x91 lma 1a6bc
=>  Start address 4
=>  Transfer rate: 866920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcpuset01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1653/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1646 W:0    | mipstx39/jmr3904: spcxx01.exe
Result: invalid   
Time: 0:00:00.268475 spcxx01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spcxx01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spcxx01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x33918 lma 0
=>  Loading section .init, size 0x40 lma 33918
=>  Loading section .fini, size 0x20 lma 33958
=>  Loading section .rodata, size 0x57ac lma 33978
=>  Loading section .eh_frame_hdr, size 0x18ec lma 39124
=>  Loading section .eh_frame, size 0x99f4 lma 3aa10
=>  Loading section .gcc_except_table, size 0x22e lma 44404
=>  Loading section .tdata, size 0xc lma 44634
=>  Loading section .ctors, size 0x14 lma 44640
=>  Loading section .dtors, size 0x8 lma 44654
=>  Loading section .got2, size 0x2c lma 4465c
=>  Loading section .rtemsroset, size 0x80 lma 44688
=>  Loading section .data, size 0x600 lma 44708
=>  Loading section .sdata, size 0x130 lma 44d08
=>  Start address 4
=>  Transfer rate: 2257328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcxx01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00000004 in std::set_unexpected (func=0x0 <std::set_unexpected(void (*)())>) at ../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc:108
=>  108	../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc: No such file or directory.
[1654/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1647 W:0    | mipstx39/jmr3904: spedfsched01.exe
Result: invalid   
Time: 0:00:00.251298 spedfsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spedfsched01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spedfsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15388 lma 0
=>  Loading section .init, size 0x40 lma 15388
=>  Loading section .fini, size 0x20 lma 153c8
=>  Loading section .rodata, size 0x2659 lma 153e8
=>  Loading section .eh_frame_hdr, size 0xd7c lma 17a44
=>  Loading section .eh_frame, size 0x4510 lma 187c0
=>  Loading section .ctors, size 0x8 lma 1ccd0
=>  Loading section .dtors, size 0x8 lma 1ccd8
=>  Loading section .got2, size 0x2c lma 1cce0
=>  Loading section .rtemsroset, size 0x70 lma 1cd0c
=>  Loading section .data, size 0x510 lma 1cd80
=>  Loading section .sdata, size 0xb9 lma 1d290
=>  Start address 4
=>  Transfer rate: 956944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spedfsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1655/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1647 W:0    | mipstx39/jmr3904: spedfsched02.exe
Result: invalid   
Time: 0:00:00.284064 spedfsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spedfsched02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spedfsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16ea8 lma 0
=>  Loading section .init, size 0x40 lma 16ea8
=>  Loading section .fini, size 0x20 lma 16ee8
=>  Loading section .rodata, size 0x2755 lma 16f08
=>  Loading section .eh_frame_hdr, size 0xe04 lma 19660
=>  Loading section .eh_frame, size 0x4d5c lma 1a464
=>  Loading section .tdata, size 0xc lma 1f1c0
=>  Loading section .ctors, size 0x8 lma 1f1cc
=>  Loading section .dtors, size 0x8 lma 1f1d4
=>  Loading section .got2, size 0x2c lma 1f1dc
=>  Loading section .rtemsroset, size 0x74 lma 1f208
=>  Loading section .data, size 0x3f8 lma 1f280
=>  Loading section .sdata, size 0xa9 lma 1f678
=>  Start address 4
=>  Transfer rate: 1030352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spedfsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1656/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1647 W:0    | mipstx39/jmr3904: spedfsched03.exe
Result: invalid   
Time: 0:00:00.300497 spedfsched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spedfsched03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spedfsched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16434 lma 0
=>  Loading section .init, size 0x40 lma 16434
=>  Loading section .fini, size 0x20 lma 16474
=>  Loading section .rodata, size 0x2681 lma 16498
=>  Loading section .eh_frame_hdr, size 0xdfc lma 18b1c
=>  Loading section .eh_frame, size 0x49f8 lma 19918
=>  Loading section .tdata, size 0xc lma 1e310
=>  Loading section .ctors, size 0x8 lma 1e31c
=>  Loading section .dtors, size 0x8 lma 1e324
=>  Loading section .got2, size 0x2c lma 1e32c
=>  Loading section .rtemsroset, size 0x74 lma 1e358
=>  Loading section .data, size 0x408 lma 1e3d0
=>  Loading section .sdata, size 0xa9 lma 1e7d8
=>  Start address 4
=>  Transfer rate: 1000368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spedfsched03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1657/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1647 W:0    | mipstx39/jmr3904: spedfsched04.exe
Result: invalid   
Time: 0:00:00.312271 spedfsched04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spedfsched04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spedfsched04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15448 lma 0
=>  Loading section .init, size 0x40 lma 15448
=>  Loading section .fini, size 0x20 lma 15488
=>  Loading section .rodata, size 0x2500 lma 154a8
=>  Loading section .eh_frame_hdr, size 0xd74 lma 179a8
=>  Loading section .eh_frame, size 0x4660 lma 1871c
=>  Loading section .ctors, size 0x8 lma 1cd7c
=>  Loading section .dtors, size 0x8 lma 1cd84
=>  Loading section .got2, size 0x2c lma 1cd8c
=>  Loading section .rtemsroset, size 0x74 lma 1cdb8
=>  Loading section .data, size 0x394 lma 1ce30
=>  Loading section .sdata, size 0xc1 lma 1d1c8
=>  Start address 4
=>  Transfer rate: 955400 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spedfsched04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1658/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1647 W:0    | mipstx39/jmr3904: sperror01.exe
Result: invalid   
Time: 0:00:00.262085 sperror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sperror01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sperror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d2e4 lma 0
=>  Loading section .init, size 0x40 lma 1d2e4
=>  Loading section .fini, size 0x20 lma 1d324
=>  Loading section .rodata, size 0x342c lma 1d348
=>  Loading section .eh_frame_hdr, size 0xf7c lma 20774
=>  Loading section .eh_frame, size 0x5524 lma 216f0
=>  Loading section .tdata, size 0xc lma 26c14
=>  Loading section .ctors, size 0x8 lma 26c20
=>  Loading section .dtors, size 0x8 lma 26c28
=>  Loading section .got2, size 0x2c lma 26c30
=>  Loading section .rtemsroset, size 0x74 lma 26c5c
=>  Loading section .data, size 0x4ec lma 26cd0
=>  Loading section .sdata, size 0xb0 lma 271c0
=>  Start address 4
=>  Transfer rate: 1282880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sperror01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1659/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1653 W:0    | mipstx39/jmr3904: sperror02.exe
Result: invalid   
Time: 0:00:00.261300 sperror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sperror02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sperror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1d1e4 lma 0
=>  Loading section .init, size 0x40 lma 1d1e4
=>  Loading section .fini, size 0x20 lma 1d224
=>  Loading section .rodata, size 0x33a4 lma 1d248
=>  Loading section .eh_frame_hdr, size 0xf6c lma 205ec
=>  Loading section .eh_frame, size 0x54ec lma 21558
=>  Loading section .tdata, size 0xc lma 26a44
=>  Loading section .ctors, size 0x8 lma 26a50
=>  Loading section .dtors, size 0x8 lma 26a58
=>  Loading section .got2, size 0x2c lma 26a60
=>  Loading section .rtemsroset, size 0x74 lma 26a8c
=>  Loading section .data, size 0x4ec lma 26b00
=>  Loading section .sdata, size 0xb0 lma 26ff0
=>  Start address 4
=>  Transfer rate: 1279168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sperror02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1660/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1654 W:0    | mipstx39/jmr3904: sperror03.exe
Result: invalid   
Time: 0:00:00.277487 sperror03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sperror03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sperror03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ad0 lma 0
=>  Loading section .init, size 0x40 lma 13ad0
=>  Loading section .fini, size 0x20 lma 13b10
=>  Loading section .rodata, size 0x1f7b lma 13b30
=>  Loading section .eh_frame_hdr, size 0xc54 lma 15aac
=>  Loading section .eh_frame, size 0x4034 lma 16700
=>  Loading section .ctors, size 0x8 lma 1a734
=>  Loading section .dtors, size 0x8 lma 1a73c
=>  Loading section .got2, size 0x2c lma 1a744
=>  Loading section .rtemsroset, size 0x70 lma 1a770
=>  Loading section .data, size 0x368 lma 1a7e0
=>  Loading section .sdata, size 0xa9 lma 1ab48
=>  Start address 4
=>  Transfer rate: 876416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sperror03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1661/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1653 W:0    | mipstx39/jmr3904: spevent_err03.exe
Result: invalid   
Time: 0:00:00.314349 spevent_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spevent_err03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spevent_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b570 lma 0
=>  Loading section .init, size 0x40 lma 1b570
=>  Loading section .fini, size 0x20 lma 1b5b0
=>  Loading section .rodata, size 0x2d5c lma 1b5d0
=>  Loading section .eh_frame_hdr, size 0xe8c lma 1e32c
=>  Loading section .eh_frame, size 0x4d24 lma 1f1b8
=>  Loading section .ctors, size 0x8 lma 23edc
=>  Loading section .dtors, size 0x8 lma 23ee4
=>  Loading section .got2, size 0x2c lma 23eec
=>  Loading section .rtemsroset, size 0x70 lma 23f18
=>  Loading section .data, size 0x554 lma 23f88
=>  Loading section .sdata, size 0xc4 lma 244e0
=>  Start address 4
=>  Transfer rate: 1191168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spevent_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1662/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1654 W:0    | mipstx39/jmr3904: speventsystem01.exe
Result: invalid   
Time: 0:00:00.260555 speventsystem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/speventsystem01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/speventsystem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x143a8 lma 0
=>  Loading section .init, size 0x40 lma 143a8
=>  Loading section .fini, size 0x20 lma 143e8
=>  Loading section .rodata, size 0x201c lma 14408
=>  Loading section .eh_frame_hdr, size 0xc94 lma 16424
=>  Loading section .eh_frame, size 0x4190 lma 170b8
=>  Loading section .ctors, size 0x8 lma 1b248
=>  Loading section .dtors, size 0x8 lma 1b250
=>  Loading section .got2, size 0x2c lma 1b258
=>  Loading section .rtemsroset, size 0x70 lma 1b284
=>  Loading section .data, size 0x368 lma 1b2f8
=>  Loading section .sdata, size 0xa9 lma 1b660
=>  Start address 4
=>  Transfer rate: 899112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/speventsystem01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1663/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1653 W:0    | mipstx39/jmr3904: speventtransient01.exe
Result: invalid   
Time: 0:00:00.260876 speventtransient01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/speventtransient01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/speventtransient01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14288 lma 0
=>  Loading section .init, size 0x40 lma 14288
=>  Loading section .fini, size 0x20 lma 142c8
=>  Loading section .rodata, size 0x1fe8 lma 142e8
=>  Loading section .eh_frame_hdr, size 0xc9c lma 162d0
=>  Loading section .eh_frame, size 0x417c lma 16f6c
=>  Loading section .ctors, size 0x8 lma 1b0e8
=>  Loading section .dtors, size 0x8 lma 1b0f0
=>  Loading section .got2, size 0x2c lma 1b0f8
=>  Loading section .rtemsroset, size 0x70 lma 1b124
=>  Loading section .data, size 0x368 lma 1b198
=>  Loading section .sdata, size 0xa9 lma 1b500
=>  Start address 4
=>  Transfer rate: 896296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/speventtransient01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1664/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1655 W:0    | mipstx39/jmr3904: spextensions01.exe
Result: invalid   
Time: 0:00:00.266400 spextensions01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spextensions01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spextensions01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15808 lma 0
=>  Loading section .init, size 0x40 lma 15808
=>  Loading section .fini, size 0x20 lma 15848
=>  Loading section .rodata, size 0x2363 lma 15868
=>  Loading section .eh_frame_hdr, size 0xe6c lma 17bcc
=>  Loading section .eh_frame, size 0x4918 lma 18a38
=>  Loading section .ctors, size 0x8 lma 1d350
=>  Loading section .dtors, size 0x8 lma 1d358
=>  Loading section .got2, size 0x2c lma 1d360
=>  Loading section .rtemsroset, size 0x74 lma 1d38c
=>  Loading section .data, size 0x394 lma 1d400
=>  Loading section .sdata, size 0xb9 lma 1d798
=>  Start address 4
=>  Transfer rate: 967264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spextensions01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1665/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1655 W:0    | mipstx39/jmr3904: spfatal01.exe
Result: invalid   
Time: 0:00:00.251577 spfatal01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13d04 lma 0
=>  Loading section .init, size 0x40 lma 13d04
=>  Loading section .fini, size 0x20 lma 13d44
=>  Loading section .rodata, size 0x23a3 lma 13d68
=>  Loading section .eh_frame_hdr, size 0xc64 lma 1610c
=>  Loading section .eh_frame, size 0x40b8 lma 16d70
=>  Loading section .ctors, size 0x8 lma 1ae28
=>  Loading section .dtors, size 0x8 lma 1ae30
=>  Loading section .got2, size 0x2c lma 1ae38
=>  Loading section .rtemsroset, size 0x6c lma 1ae64
=>  Loading section .data, size 0x368 lma 1aed0
=>  Loading section .sdata, size 0xa5 lma 1b238
=>  Start address 4
=>  Transfer rate: 890560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1666/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1655 W:0    | mipstx39/jmr3904: spfatal03.exe
Result: invalid   
Time: 0:00:00.258963 spfatal03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ca8 lma 0
=>  Loading section .init, size 0x40 lma 14ca8
=>  Loading section .fini, size 0x20 lma 14ce8
=>  Loading section .rodata, size 0x251b lma 14d08
=>  Loading section .eh_frame_hdr, size 0xd1c lma 17224
=>  Loading section .eh_frame, size 0x4490 lma 17f40
=>  Loading section .ctors, size 0x8 lma 1c3d0
=>  Loading section .dtors, size 0x8 lma 1c3d8
=>  Loading section .got2, size 0x2c lma 1c3e0
=>  Loading section .rtemsroset, size 0x74 lma 1c40c
=>  Loading section .data, size 0x394 lma 1c480
=>  Loading section .sdata, size 0xad lma 1c818
=>  Start address 4
=>  Transfer rate: 935424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1667/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1662 W:0    | mipstx39/jmr3904: spfatal04.exe
Result: invalid   
Time: 0:00:00.282922 spfatal04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13d88 lma 0
=>  Loading section .init, size 0x40 lma 13d88
=>  Loading section .fini, size 0x20 lma 13dc8
=>  Loading section .rodata, size 0x238b lma 13de8
=>  Loading section .eh_frame_hdr, size 0xc5c lma 16174
=>  Loading section .eh_frame, size 0x40ac lma 16dd0
=>  Loading section .ctors, size 0x8 lma 1ae7c
=>  Loading section .dtors, size 0x8 lma 1ae84
=>  Loading section .got2, size 0x2c lma 1ae8c
=>  Loading section .rtemsroset, size 0x70 lma 1aeb8
=>  Loading section .data, size 0x368 lma 1af28
=>  Loading section .sdata, size 0xa9 lma 1b290
=>  Start address 4
=>  Transfer rate: 891328 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1668/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1662 W:0    | mipstx39/jmr3904: spfatal05.exe
Result: invalid   
Time: 0:00:00.280316 spfatal05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14148 lma 0
=>  Loading section .init, size 0x40 lma 14148
=>  Loading section .fini, size 0x20 lma 14188
=>  Loading section .rodata, size 0x24cb lma 141a8
=>  Loading section .eh_frame_hdr, size 0xc94 lma 16674
=>  Loading section .eh_frame, size 0x416c lma 17308
=>  Loading section .ctors, size 0x8 lma 1b474
=>  Loading section .dtors, size 0x8 lma 1b47c
=>  Loading section .got2, size 0x2c lma 1b484
=>  Loading section .rtemsroset, size 0x70 lma 1b4b0
=>  Loading section .data, size 0x364 lma 1b520
=>  Loading section .sdata, size 0xa9 lma 1b888
=>  Start address 4
=>  Transfer rate: 903520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1669/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1663 W:0    | mipstx39/jmr3904: spfatal09.exe
Result: invalid   
Time: 0:00:00.272756 spfatal09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal09.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13eb4 lma 0
=>  Loading section .init, size 0x40 lma 13eb4
=>  Loading section .fini, size 0x20 lma 13ef4
=>  Loading section .rodata, size 0x2393 lma 13f18
=>  Loading section .eh_frame_hdr, size 0xc74 lma 162ac
=>  Loading section .eh_frame, size 0x4118 lma 16f20
=>  Loading section .ctors, size 0x8 lma 1b038
=>  Loading section .dtors, size 0x8 lma 1b040
=>  Loading section .got2, size 0x2c lma 1b048
=>  Loading section .rtemsroset, size 0x74 lma 1b074
=>  Loading section .data, size 0x368 lma 1b0e8
=>  Loading section .sdata, size 0xa9 lma 1b450
=>  Start address 4
=>  Transfer rate: 894880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal09.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1670/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1663 W:0    | mipstx39/jmr3904: spfatal10.exe
Result: invalid   
Time: 0:00:00.260226 spfatal10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal10.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13cd0 lma 0
=>  Loading section .init, size 0x40 lma 13cd0
=>  Loading section .fini, size 0x20 lma 13d10
=>  Loading section .rodata, size 0x207f lma 13d30
=>  Loading section .eh_frame_hdr, size 0xc5c lma 15db0
=>  Loading section .eh_frame, size 0x4084 lma 16a0c
=>  Loading section .ctors, size 0x8 lma 1aa90
=>  Loading section .dtors, size 0x8 lma 1aa98
=>  Loading section .got2, size 0x2c lma 1aaa0
=>  Loading section .rtemsroset, size 0x70 lma 1aacc
=>  Loading section .data, size 0x368 lma 1ab40
=>  Loading section .sdata, size 0xa9 lma 1aea8
=>  Start address 4
=>  Transfer rate: 883296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal10.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1671/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1663 W:0    | mipstx39/jmr3904: spfatal11.exe
Result: invalid   
Time: 0:00:00.263455 spfatal11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal11.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13cd0 lma 0
=>  Loading section .init, size 0x40 lma 13cd0
=>  Loading section .fini, size 0x20 lma 13d10
=>  Loading section .rodata, size 0x2077 lma 13d30
=>  Loading section .eh_frame_hdr, size 0xc5c lma 15da8
=>  Loading section .eh_frame, size 0x4084 lma 16a04
=>  Loading section .ctors, size 0x8 lma 1aa88
=>  Loading section .dtors, size 0x8 lma 1aa90
=>  Loading section .got2, size 0x2c lma 1aa98
=>  Loading section .rtemsroset, size 0x70 lma 1aac4
=>  Loading section .data, size 0x368 lma 1ab38
=>  Loading section .sdata, size 0xa9 lma 1aea0
=>  Start address 4
=>  Transfer rate: 883232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal11.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1672/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1663 W:0    | mipstx39/jmr3904: spfatal12.exe
Result: invalid   
Time: 0:00:00.280063 spfatal12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal12.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13eb4 lma 0
=>  Loading section .init, size 0x40 lma 13eb4
=>  Loading section .fini, size 0x20 lma 13ef4
=>  Loading section .rodata, size 0x23ab lma 13f18
=>  Loading section .eh_frame_hdr, size 0xc74 lma 162c4
=>  Loading section .eh_frame, size 0x4118 lma 16f38
=>  Loading section .ctors, size 0x8 lma 1b050
=>  Loading section .dtors, size 0x8 lma 1b058
=>  Loading section .got2, size 0x2c lma 1b060
=>  Loading section .rtemsroset, size 0x74 lma 1b08c
=>  Loading section .data, size 0x368 lma 1b100
=>  Loading section .sdata, size 0xa9 lma 1b468
=>  Start address 4
=>  Transfer rate: 895072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal12.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1673/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1663 W:0    | mipstx39/jmr3904: spfatal14.exe
Result: invalid   
Time: 0:00:00.264827 spfatal14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal14.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13df4 lma 0
=>  Loading section .init, size 0x40 lma 13df4
=>  Loading section .fini, size 0x20 lma 13e34
=>  Loading section .rodata, size 0x238b lma 13e58
=>  Loading section .eh_frame_hdr, size 0xc6c lma 161e4
=>  Loading section .eh_frame, size 0x40f8 lma 16e50
=>  Loading section .ctors, size 0x8 lma 1af48
=>  Loading section .dtors, size 0x8 lma 1af50
=>  Loading section .got2, size 0x2c lma 1af58
=>  Loading section .rtemsroset, size 0x70 lma 1af84
=>  Loading section .data, size 0x368 lma 1aff8
=>  Loading section .sdata, size 0xa9 lma 1b360
=>  Start address 4
=>  Transfer rate: 892928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal14.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1674/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1663 W:0    | mipstx39/jmr3904: spfatal15.exe
Result: invalid   
Time: 0:00:00.258552 spfatal15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal15.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13df4 lma 0
=>  Loading section .init, size 0x40 lma 13df4
=>  Loading section .fini, size 0x20 lma 13e34
=>  Loading section .rodata, size 0x238b lma 13e58
=>  Loading section .eh_frame_hdr, size 0xc6c lma 161e4
=>  Loading section .eh_frame, size 0x40f8 lma 16e50
=>  Loading section .ctors, size 0x8 lma 1af48
=>  Loading section .dtors, size 0x8 lma 1af50
=>  Loading section .got2, size 0x2c lma 1af58
=>  Loading section .rtemsroset, size 0x70 lma 1af84
=>  Loading section .data, size 0x368 lma 1aff8
=>  Loading section .sdata, size 0xa9 lma 1b360
=>  Start address 4
=>  Transfer rate: 892928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal15.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1675/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1669 W:0    | mipstx39/jmr3904: spfatal26.exe
Result: invalid   
Time: 0:00:00.251293 spfatal26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal26.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xc344 lma 0
=>  Loading section .init, size 0x40 lma c344
=>  Loading section .fini, size 0x20 lma c384
=>  Loading section .rodata, size 0x1a98 lma c3a8
=>  Loading section .eh_frame_hdr, size 0x624 lma de40
=>  Loading section .eh_frame, size 0x20d8 lma e464
=>  Loading section .ctors, size 0x8 lma 1053c
=>  Loading section .dtors, size 0x8 lma 10544
=>  Loading section .got2, size 0x2c lma 1054c
=>  Loading section .rtemsroset, size 0x60 lma 10578
=>  Loading section .data, size 0x22c lma 105d8
=>  Loading section .sdata, size 0x78 lma 10804
=>  Start address 4
=>  Transfer rate: 541632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal26.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1676/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1670 W:0    | mipstx39/jmr3904: spfatal28.exe
Result: invalid   
Time: 0:00:00.272257 spfatal28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal28.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13da8 lma 0
=>  Loading section .init, size 0x40 lma 13da8
=>  Loading section .fini, size 0x20 lma 13de8
=>  Loading section .rodata, size 0x2383 lma 13e08
=>  Loading section .eh_frame_hdr, size 0xc5c lma 1618c
=>  Loading section .eh_frame, size 0x40c8 lma 16de8
=>  Loading section .ctors, size 0x8 lma 1aeb0
=>  Loading section .dtors, size 0x8 lma 1aeb8
=>  Loading section .got2, size 0x2c lma 1aec0
=>  Loading section .rtemsroset, size 0x70 lma 1aeec
=>  Loading section .data, size 0x368 lma 1af60
=>  Loading section .sdata, size 0xa9 lma 1b2c8
=>  Start address 4
=>  Transfer rate: 891744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal28.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1677/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1671 W:0    | mipstx39/jmr3904: spfatal29.exe
Result: invalid   
Time: 0:00:00.259009 spfatal29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal29.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14288 lma 0
=>  Loading section .init, size 0x40 lma 14288
=>  Loading section .fini, size 0x20 lma 142c8
=>  Loading section .rodata, size 0x23cb lma 142e8
=>  Loading section .eh_frame_hdr, size 0xcd4 lma 166b4
=>  Loading section .eh_frame, size 0x42c8 lma 17388
=>  Loading section .ctors, size 0x8 lma 1b650
=>  Loading section .dtors, size 0x8 lma 1b658
=>  Loading section .got2, size 0x2c lma 1b660
=>  Loading section .rtemsroset, size 0x74 lma 1b68c
=>  Loading section .data, size 0x394 lma 1b700
=>  Loading section .sdata, size 0xa9 lma 1ba98
=>  Start address 4
=>  Transfer rate: 907744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal29.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1678/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1671 W:0    | mipstx39/jmr3904: spfatal30.exe
Result: invalid   
Time: 0:00:00.259444 spfatal30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal30.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d1c lma 0
=>  Loading section .init, size 0x40 lma 11d1c
=>  Loading section .fini, size 0x20 lma 11d5c
=>  Loading section .rodata, size 0x1dc0 lma 11d80
=>  Loading section .eh_frame_hdr, size 0xb24 lma 13b40
=>  Loading section .eh_frame, size 0x3994 lma 14664
=>  Loading section .ctors, size 0x8 lma 17ff8
=>  Loading section .dtors, size 0x8 lma 18000
=>  Loading section .got2, size 0x2c lma 18008
=>  Loading section .rtemsroset, size 0x64 lma 18034
=>  Loading section .data, size 0x30c lma 18098
=>  Loading section .sdata, size 0x98 lma 183a8
=>  Start address 4
=>  Transfer rate: 795072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal30.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1679/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1671 W:0    | mipstx39/jmr3904: spfatal31.exe
Result: invalid   
Time: 0:00:00.259437 spfatal31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal31.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x131c0 lma 0
=>  Loading section .init, size 0x40 lma 131c0
=>  Loading section .fini, size 0x20 lma 13200
=>  Loading section .rodata, size 0x1eb0 lma 13220
=>  Loading section .eh_frame_hdr, size 0xc1c lma 150d0
=>  Loading section .eh_frame, size 0x3e2c lma 15cec
=>  Loading section .ctors, size 0x8 lma 19b18
=>  Loading section .dtors, size 0x8 lma 19b20
=>  Loading section .got2, size 0x2c lma 19b28
=>  Loading section .rtemsroset, size 0x6c lma 19b54
=>  Loading section .data, size 0x354 lma 19bc0
=>  Loading section .sdata, size 0xac lma 19f18
=>  Start address 4
=>  Transfer rate: 851456 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal31.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1680/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1671 W:0    | mipstx39/jmr3904: spfatal32.exe
Result: invalid   
Time: 0:00:00.256368 spfatal32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal32.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13e14 lma 0
=>  Loading section .init, size 0x40 lma 13e14
=>  Loading section .fini, size 0x20 lma 13e54
=>  Loading section .rodata, size 0x2393 lma 13e78
=>  Loading section .eh_frame_hdr, size 0xc6c lma 1620c
=>  Loading section .eh_frame, size 0x40fc lma 16e78
=>  Loading section .ctors, size 0x8 lma 1af74
=>  Loading section .dtors, size 0x8 lma 1af7c
=>  Loading section .got2, size 0x2c lma 1af84
=>  Loading section .rtemsroset, size 0x70 lma 1afb0
=>  Loading section .data, size 0x368 lma 1b020
=>  Loading section .sdata, size 0xa9 lma 1b388
=>  Start address 4
=>  Transfer rate: 893280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal32.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1681/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1671 W:0    | mipstx39/jmr3904: spfatal33.exe
Result: invalid   
Time: 0:00:00.262166 spfatal33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal33.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ec8 lma 0
=>  Loading section .init, size 0x40 lma 13ec8
=>  Loading section .fini, size 0x20 lma 13f08
=>  Loading section .rodata, size 0x23b3 lma 13f28
=>  Loading section .eh_frame_hdr, size 0xc7c lma 162dc
=>  Loading section .eh_frame, size 0x412c lma 16f58
=>  Loading section .ctors, size 0x8 lma 1b084
=>  Loading section .dtors, size 0x8 lma 1b08c
=>  Loading section .got2, size 0x2c lma 1b094
=>  Loading section .rtemsroset, size 0x70 lma 1b0c0
=>  Loading section .data, size 0x368 lma 1b130
=>  Loading section .sdata, size 0xa9 lma 1b498
=>  Start address 4
=>  Transfer rate: 895488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal33.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1682/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1671 W:0    | mipstx39/jmr3904: spfatal34.exe
Result: invalid   
Time: 0:00:00.278962 spfatal34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfatal34.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfatal34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13d28 lma 0
=>  Loading section .init, size 0x40 lma 13d28
=>  Loading section .fini, size 0x20 lma 13d68
=>  Loading section .rodata, size 0x2393 lma 13d88
=>  Loading section .eh_frame_hdr, size 0xc44 lma 1611c
=>  Loading section .eh_frame, size 0x4088 lma 16d60
=>  Loading section .ctors, size 0x8 lma 1ade8
=>  Loading section .dtors, size 0x8 lma 1adf0
=>  Loading section .got2, size 0x2c lma 1adf8
=>  Loading section .rtemsroset, size 0x70 lma 1ae24
=>  Loading section .data, size 0x368 lma 1ae98
=>  Loading section .sdata, size 0x9e lma 1b200
=>  Start address 4
=>  Transfer rate: 890056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal34.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1683/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1674 W:0    | mipstx39/jmr3904: spfifo01.exe
Result: invalid   
Time: 0:00:00.251618 spfifo01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfifo01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfifo01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ed8 lma 0
=>  Loading section .init, size 0x40 lma 12ed8
=>  Loading section .fini, size 0x20 lma 12f18
=>  Loading section .rodata, size 0x1f94 lma 12f38
=>  Loading section .eh_frame_hdr, size 0xbfc lma 14ecc
=>  Loading section .eh_frame, size 0x3e44 lma 15ac8
=>  Loading section .ctors, size 0x8 lma 1990c
=>  Loading section .dtors, size 0x8 lma 19914
=>  Loading section .got2, size 0x2c lma 1991c
=>  Loading section .rtemsroset, size 0x6c lma 19948
=>  Loading section .data, size 0x34c lma 199b8
=>  Loading section .sdata, size 0x91 lma 19d04
=>  Start address 4
=>  Transfer rate: 846984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1684/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1675 W:0    | mipstx39/jmr3904: spfifo02.exe
Result: invalid   
Time: 0:00:00.289305 spfifo02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfifo02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfifo02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x162d4 lma 0
=>  Loading section .init, size 0x40 lma 162d4
=>  Loading section .fini, size 0x20 lma 16314
=>  Loading section .rodata, size 0x2c24 lma 16338
=>  Loading section .eh_frame_hdr, size 0xdec lma 18f5c
=>  Loading section .eh_frame, size 0x48e4 lma 19d48
=>  Loading section .ctors, size 0x8 lma 1e62c
=>  Loading section .dtors, size 0x8 lma 1e634
=>  Loading section .got2, size 0x2c lma 1e63c
=>  Loading section .rtemsroset, size 0x74 lma 1e668
=>  Loading section .data, size 0x384 lma 1e6e0
=>  Loading section .sdata, size 0xb1 lma 1ea68
=>  Start address 4
=>  Transfer rate: 1005672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1685/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1674 W:0    | mipstx39/jmr3904: spfifo03.exe
Result: invalid   
Time: 0:00:00.276344 spfifo03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfifo03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfifo03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1788c lma 0
=>  Loading section .init, size 0x40 lma 1788c
=>  Loading section .fini, size 0x20 lma 178cc
=>  Loading section .rodata, size 0x2d72 lma 178f0
=>  Loading section .eh_frame_hdr, size 0xeac lma 1a664
=>  Loading section .eh_frame, size 0x4ce0 lma 1b510
=>  Loading section .ctors, size 0x8 lma 201f0
=>  Loading section .dtors, size 0x8 lma 201f8
=>  Loading section .got2, size 0x2c lma 20200
=>  Loading section .rtemsroset, size 0x78 lma 2022c
=>  Loading section .data, size 0x3c0 lma 202a8
=>  Loading section .sdata, size 0xb5 lma 20668
=>  Start address 4
=>  Transfer rate: 1063064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1686/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1680 W:0    | mipstx39/jmr3904: spfifo04.exe
Result: invalid   
Time: 0:00:00.262826 spfifo04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x162e0 lma 0
=>  Loading section .init, size 0x40 lma 162e0
=>  Loading section .fini, size 0x20 lma 16320
=>  Loading section .rodata, size 0x2380 lma 16340
=>  Loading section .eh_frame_hdr, size 0xdcc lma 186c0
=>  Loading section .eh_frame, size 0x4894 lma 1948c
=>  Loading section .ctors, size 0x8 lma 1dd20
=>  Loading section .dtors, size 0x8 lma 1dd28
=>  Loading section .got2, size 0x2c lma 1dd30
=>  Loading section .rtemsroset, size 0x74 lma 1dd5c
=>  Loading section .data, size 0x388 lma 1ddd0
=>  Loading section .sdata, size 0xb1 lma 1e158
=>  Start address 4
=>  Transfer rate: 987208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1687/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1680 W:0    | mipstx39/jmr3904: spfifo05.exe
Result: invalid   
Time: 0:00:00.307336 spfifo05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfifo05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfifo05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16704 lma 0
=>  Loading section .init, size 0x40 lma 16704
=>  Loading section .fini, size 0x20 lma 16744
=>  Loading section .rodata, size 0x2e0c lma 16768
=>  Loading section .eh_frame_hdr, size 0xdd4 lma 19574
=>  Loading section .eh_frame, size 0x4960 lma 1a348
=>  Loading section .ctors, size 0x8 lma 1eca8
=>  Loading section .dtors, size 0x8 lma 1ecb0
=>  Loading section .got2, size 0x2c lma 1ecb8
=>  Loading section .rtemsroset, size 0x74 lma 1ece4
=>  Loading section .data, size 0x398 lma 1ed58
=>  Loading section .sdata, size 0x9d lma 1f0f0
=>  Start address 4
=>  Transfer rate: 1018952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1688/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1682 W:0    | mipstx39/jmr3904: spfreechain01.exe
Result: invalid   
Time: 0:00:00.284751 spfreechain01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spfreechain01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spfreechain01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13178 lma 0
=>  Loading section .init, size 0x40 lma 13178
=>  Loading section .fini, size 0x20 lma 131b8
=>  Loading section .rodata, size 0x20a0 lma 131d8
=>  Loading section .eh_frame_hdr, size 0xc0c lma 15278
=>  Loading section .eh_frame, size 0x3e94 lma 15e84
=>  Loading section .ctors, size 0x8 lma 19d18
=>  Loading section .dtors, size 0x8 lma 19d20
=>  Loading section .got2, size 0x2c lma 19d28
=>  Loading section .rtemsroset, size 0x6c lma 19d54
=>  Loading section .data, size 0x348 lma 19dc0
=>  Loading section .sdata, size 0x91 lma 1a108
=>  Start address 4
=>  Transfer rate: 855240 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfreechain01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1689/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1681 W:0    | mipstx39/jmr3904: spglobalcon01.exe
Result: invalid   
Time: 0:00:00.265641 spglobalcon01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spglobalcon01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spglobalcon01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x125f8 lma 0
=>  Loading section .init, size 0x40 lma 125f8
=>  Loading section .fini, size 0x20 lma 12638
=>  Loading section .rodata, size 0x1ed0 lma 12658
=>  Loading section .eh_frame_hdr, size 0xb4c lma 14528
=>  Loading section .eh_frame, size 0x3b40 lma 15074
=>  Loading section .ctors, size 0xc lma 18bb4
=>  Loading section .dtors, size 0x8 lma 18bc0
=>  Loading section .got2, size 0x2c lma 18bc8
=>  Loading section .rtemsroset, size 0x64 lma 18bf4
=>  Loading section .data, size 0x2dc lma 18c58
=>  Loading section .sdata, size 0x7e lma 18f34
=>  Start address 4
=>  Transfer rate: 818576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spglobalcon01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1690/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1680 W:0    | mipstx39/jmr3904: spglobalcon02.exe
Result: invalid   
Time: 0:00:00.257105 spglobalcon02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spglobalcon02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spglobalcon02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14080 lma 0
=>  Loading section .init, size 0x40 lma 14080
=>  Loading section .fini, size 0x20 lma 140c0
=>  Loading section .rodata, size 0x1ff8 lma 140e0
=>  Loading section .eh_frame_hdr, size 0xccc lma 160d8
=>  Loading section .eh_frame, size 0x41f0 lma 16da4
=>  Loading section .ctors, size 0x18 lma 1af94
=>  Loading section .dtors, size 0x18 lma 1afac
=>  Loading section .got2, size 0x2c lma 1afc4
=>  Loading section .rtemsroset, size 0x70 lma 1aff0
=>  Loading section .data, size 0x368 lma 1b060
=>  Loading section .sdata, size 0xa9 lma 1b3c8
=>  Start address 4
=>  Transfer rate: 893832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spglobalcon02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1691/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1681 W:0    | mipstx39/jmr3904: spheapprot.exe
Result: invalid   
Time: 0:00:00.259628 spheapprot.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spheapprot.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spheapprot.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12e48 lma 0
=>  Loading section .init, size 0x40 lma 12e48
=>  Loading section .fini, size 0x20 lma 12e88
=>  Loading section .rodata, size 0x1ea8 lma 12ea8
=>  Loading section .eh_frame_hdr, size 0xbe4 lma 14d50
=>  Loading section .eh_frame, size 0x3e44 lma 15934
=>  Loading section .ctors, size 0x8 lma 19778
=>  Loading section .dtors, size 0x8 lma 19780
=>  Loading section .got2, size 0x2c lma 19788
=>  Loading section .rtemsroset, size 0x6c lma 197b4
=>  Loading section .data, size 0x34c lma 19820
=>  Loading section .sdata, size 0x91 lma 19b6c
=>  Start address 4
=>  Transfer rate: 843752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spheapprot.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1692/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1682 W:0    | mipstx39/jmr3904: spinternalerror01.exe
Result: invalid   
Time: 0:00:00.252061 spinternalerror01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spinternalerror01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spinternalerror01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x46dc lma 0
=>  Loading section .init, size 0x40 lma 46dc
=>  Loading section .fini, size 0x20 lma 471c
=>  Loading section .rodata, size 0x139c lma 4740
=>  Loading section .eh_frame_hdr, size 0x21c lma 5adc
=>  Loading section .eh_frame, size 0xa54 lma 5cf8
=>  Loading section .ctors, size 0x8 lma 674c
=>  Loading section .dtors, size 0x8 lma 6754
=>  Loading section .got2, size 0x2c lma 675c
=>  Loading section .rtemsroset, size 0x48 lma 6788
=>  Loading section .data, size 0x70 lma 67d0
=>  Loading section .sdata, size 0x4c lma 6840
=>  Start address 4
=>  Transfer rate: 214080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spinternalerror01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1693/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1683 W:0    | mipstx39/jmr3904: spinternalerror02.exe
Result: invalid   
Time: 0:00:00.256166 spinternalerror02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spinternalerror02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spinternalerror02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12ee8 lma 0
=>  Loading section .init, size 0x40 lma 12ee8
=>  Loading section .fini, size 0x20 lma 12f28
=>  Loading section .rodata, size 0x2284 lma 12f48
=>  Loading section .eh_frame_hdr, size 0xbfc lma 151cc
=>  Loading section .eh_frame, size 0x3e48 lma 15dc8
=>  Loading section .ctors, size 0x8 lma 19c10
=>  Loading section .dtors, size 0x8 lma 19c18
=>  Loading section .got2, size 0x2c lma 19c20
=>  Loading section .rtemsroset, size 0x6c lma 19c4c
=>  Loading section .data, size 0x34c lma 19cb8
=>  Loading section .sdata, size 0x91 lma 1a004
=>  Start address 4
=>  Transfer rate: 853160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spinternalerror02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1694/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1689 W:0    | mipstx39/jmr3904: spintr_err01.exe
Result: invalid   
Time: 0:00:00.254121 spintr_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintr_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintr_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b8c lma 0
=>  Loading section .init, size 0x40 lma 13b8c
=>  Loading section .fini, size 0x20 lma 13bcc
=>  Loading section .rodata, size 0x1fc4 lma 13bf0
=>  Loading section .eh_frame_hdr, size 0xc5c lma 15bb4
=>  Loading section .eh_frame, size 0x4064 lma 16810
=>  Loading section .ctors, size 0x8 lma 1a874
=>  Loading section .dtors, size 0x8 lma 1a87c
=>  Loading section .got2, size 0x2c lma 1a884
=>  Loading section .rtemsroset, size 0x70 lma 1a8b0
=>  Loading section .data, size 0x368 lma 1a920
=>  Loading section .sdata, size 0xa5 lma 1ac88
=>  Start address 4
=>  Transfer rate: 878920 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintr_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1695/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1690 W:0    | mipstx39/jmr3904: spintrcritical01.exe
Result: invalid   
Time: 0:00:00.524671 spintrcritical01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a4fc lma 0
=>  Loading section .init, size 0x40 lma 1a4fc
=>  Loading section .fini, size 0x20 lma 1a53c
=>  Loading section .rodata, size 0x29a4 lma 1a560
=>  Loading section .eh_frame_hdr, size 0x1034 lma 1cf04
=>  Loading section .eh_frame, size 0x5618 lma 1df38
=>  Loading section .ctors, size 0x8 lma 23550
=>  Loading section .dtors, size 0x8 lma 23558
=>  Loading section .got2, size 0x2c lma 23560
=>  Loading section .rtemsroset, size 0x80 lma 2358c
=>  Loading section .data, size 0x47c lma 23610
=>  Loading section .sdata, size 0xad lma 23a90
=>  Start address 4
=>  Transfer rate: 1169800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1696/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1690 W:0    | mipstx39/jmr3904: spintrcritical02.exe
Result: invalid   
Time: 0:00:00.504564 spintrcritical02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a4fc lma 0
=>  Loading section .init, size 0x40 lma 1a4fc
=>  Loading section .fini, size 0x20 lma 1a53c
=>  Loading section .rodata, size 0x29b4 lma 1a560
=>  Loading section .eh_frame_hdr, size 0x1034 lma 1cf14
=>  Loading section .eh_frame, size 0x5618 lma 1df48
=>  Loading section .ctors, size 0x8 lma 23560
=>  Loading section .dtors, size 0x8 lma 23568
=>  Loading section .got2, size 0x2c lma 23570
=>  Loading section .rtemsroset, size 0x80 lma 2359c
=>  Loading section .data, size 0x47c lma 23620
=>  Loading section .sdata, size 0xad lma 23aa0
=>  Start address 4
=>  Transfer rate: 1169928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1697/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1690 W:0    | mipstx39/jmr3904: spintrcritical03.exe
Result: invalid   
Time: 0:00:00.290859 spintrcritical03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a4fc lma 0
=>  Loading section .init, size 0x40 lma 1a4fc
=>  Loading section .fini, size 0x20 lma 1a53c
=>  Loading section .rodata, size 0x29bc lma 1a560
=>  Loading section .eh_frame_hdr, size 0x1034 lma 1cf1c
=>  Loading section .eh_frame, size 0x5618 lma 1df50
=>  Loading section .ctors, size 0x8 lma 23568
=>  Loading section .dtors, size 0x8 lma 23570
=>  Loading section .got2, size 0x2c lma 23578
=>  Loading section .rtemsroset, size 0x80 lma 235a4
=>  Loading section .data, size 0x47c lma 23628
=>  Loading section .sdata, size 0xad lma 23aa8
=>  Start address 4
=>  Transfer rate: 1169992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1698/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1690 W:0    | mipstx39/jmr3904: spintrcritical04.exe
Result: invalid   
Time: 0:00:00.507593 spintrcritical04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a4fc lma 0
=>  Loading section .init, size 0x40 lma 1a4fc
=>  Loading section .fini, size 0x20 lma 1a53c
=>  Loading section .rodata, size 0x29bc lma 1a560
=>  Loading section .eh_frame_hdr, size 0x1034 lma 1cf1c
=>  Loading section .eh_frame, size 0x5618 lma 1df50
=>  Loading section .ctors, size 0x8 lma 23568
=>  Loading section .dtors, size 0x8 lma 23570
=>  Loading section .got2, size 0x2c lma 23578
=>  Loading section .rtemsroset, size 0x80 lma 235a4
=>  Loading section .data, size 0x47c lma 23628
=>  Loading section .sdata, size 0xad lma 23aa8
=>  Start address 4
=>  Transfer rate: 1169992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1699/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1690 W:0    | mipstx39/jmr3904: spintrcritical05.exe
Result: invalid   
Time: 0:00:00.322853 spintrcritical05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a4fc lma 0
=>  Loading section .init, size 0x40 lma 1a4fc
=>  Loading section .fini, size 0x20 lma 1a53c
=>  Loading section .rodata, size 0x29c4 lma 1a560
=>  Loading section .eh_frame_hdr, size 0x1034 lma 1cf24
=>  Loading section .eh_frame, size 0x5618 lma 1df58
=>  Loading section .ctors, size 0x8 lma 23570
=>  Loading section .dtors, size 0x8 lma 23578
=>  Loading section .got2, size 0x2c lma 23580
=>  Loading section .rtemsroset, size 0x80 lma 235ac
=>  Loading section .data, size 0x47c lma 23630
=>  Loading section .sdata, size 0xad lma 23ab0
=>  Start address 4
=>  Transfer rate: 1170056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1700/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1690 W:0    | mipstx39/jmr3904: spintrcritical08.exe
Result: invalid   
Time: 0:00:00.627730 spintrcritical08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19ec0 lma 0
=>  Loading section .init, size 0x40 lma 19ec0
=>  Loading section .fini, size 0x20 lma 19f00
=>  Loading section .rodata, size 0x2a48 lma 19f20
=>  Loading section .eh_frame_hdr, size 0xff4 lma 1c968
=>  Loading section .eh_frame, size 0x54d4 lma 1d95c
=>  Loading section .ctors, size 0x8 lma 22e30
=>  Loading section .dtors, size 0x8 lma 22e38
=>  Loading section .got2, size 0x2c lma 22e40
=>  Loading section .rtemsroset, size 0x80 lma 22e6c
=>  Loading section .data, size 0x47c lma 22ef0
=>  Loading section .sdata, size 0xa9 lma 23370
=>  Start address 4
=>  Transfer rate: 1155208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1701/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1690 W:0    | mipstx39/jmr3904: spintrcritical09.exe
Result: invalid   
Time: 0:00:00.296835 spintrcritical09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical09.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a09c lma 0
=>  Loading section .init, size 0x40 lma 1a09c
=>  Loading section .fini, size 0x20 lma 1a0dc
=>  Loading section .rodata, size 0x298c lma 1a100
=>  Loading section .eh_frame_hdr, size 0x1014 lma 1ca8c
=>  Loading section .eh_frame, size 0x554c lma 1daa0
=>  Loading section .ctors, size 0x8 lma 22fec
=>  Loading section .dtors, size 0x8 lma 22ff4
=>  Loading section .got2, size 0x2c lma 22ffc
=>  Loading section .rtemsroset, size 0x80 lma 23028
=>  Loading section .data, size 0x47c lma 230a8
=>  Loading section .sdata, size 0xad lma 23528
=>  Start address 4
=>  Transfer rate: 1158760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical09.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1702/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1691 W:0    | mipstx39/jmr3904: spintrcritical10.exe
Result: invalid   
Time: 0:00:00.265653 spintrcritical10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical10.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19ea0 lma 0
=>  Loading section .init, size 0x40 lma 19ea0
=>  Loading section .fini, size 0x20 lma 19ee0
=>  Loading section .rodata, size 0x2bac lma 19f00
=>  Loading section .eh_frame_hdr, size 0xfb4 lma 1caac
=>  Loading section .eh_frame, size 0x5318 lma 1da60
=>  Loading section .ctors, size 0x8 lma 22d78
=>  Loading section .dtors, size 0x8 lma 22d80
=>  Loading section .got2, size 0x2c lma 22d88
=>  Loading section .rtemsroset, size 0x84 lma 22db4
=>  Loading section .data, size 0x474 lma 22e38
=>  Loading section .sdata, size 0xa9 lma 232b0
=>  Start address 4
=>  Transfer rate: 1153704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical10.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1703/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1697 W:0    | mipstx39/jmr3904: spintrcritical11.exe
Result: invalid   
Time: 0:00:00.252256 spintrcritical11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical11.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19374 lma 0
=>  Loading section .init, size 0x40 lma 19374
=>  Loading section .fini, size 0x20 lma 193b4
=>  Loading section .rodata, size 0x2984 lma 193d8
=>  Loading section .eh_frame_hdr, size 0xf9c lma 1bd5c
=>  Loading section .eh_frame, size 0x5234 lma 1ccf8
=>  Loading section .ctors, size 0x8 lma 21f2c
=>  Loading section .dtors, size 0x8 lma 21f34
=>  Loading section .got2, size 0x2c lma 21f3c
=>  Loading section .rtemsroset, size 0x7c lma 21f68
=>  Loading section .data, size 0x454 lma 21fe8
=>  Loading section .sdata, size 0xa9 lma 22440
=>  Start address 4
=>  Transfer rate: 1124072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical11.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1704/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1697 W:0    | mipstx39/jmr3904: spintrcritical12.exe
Result: invalid   
Time: 0:00:00.504749 spintrcritical12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical12.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19374 lma 0
=>  Loading section .init, size 0x40 lma 19374
=>  Loading section .fini, size 0x20 lma 193b4
=>  Loading section .rodata, size 0x299c lma 193d8
=>  Loading section .eh_frame_hdr, size 0xf9c lma 1bd74
=>  Loading section .eh_frame, size 0x5234 lma 1cd10
=>  Loading section .ctors, size 0x8 lma 21f44
=>  Loading section .dtors, size 0x8 lma 21f4c
=>  Loading section .got2, size 0x2c lma 21f54
=>  Loading section .rtemsroset, size 0x7c lma 21f80
=>  Loading section .data, size 0x454 lma 22000
=>  Loading section .sdata, size 0xa9 lma 22458
=>  Start address 4
=>  Transfer rate: 1124264 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical12.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1705/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1698 W:0    | mipstx39/jmr3904: spintrcritical13.exe
Result: invalid   
Time: 0:00:00.287083 spintrcritical13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical13.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x195cc lma 0
=>  Loading section .init, size 0x40 lma 195cc
=>  Loading section .fini, size 0x20 lma 1960c
=>  Loading section .rodata, size 0x2974 lma 19630
=>  Loading section .eh_frame_hdr, size 0xfd4 lma 1bfa4
=>  Loading section .eh_frame, size 0x5350 lma 1cf78
=>  Loading section .ctors, size 0x8 lma 222c8
=>  Loading section .dtors, size 0x8 lma 222d0
=>  Loading section .got2, size 0x2c lma 222d8
=>  Loading section .rtemsroset, size 0x80 lma 22304
=>  Loading section .data, size 0x47c lma 22388
=>  Loading section .sdata, size 0xa9 lma 22808
=>  Start address 4
=>  Transfer rate: 1131816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical13.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1706/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1698 W:0    | mipstx39/jmr3904: spintrcritical14.exe
Result: invalid   
Time: 0:00:00.261619 spintrcritical14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical14.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x197d8 lma 0
=>  Loading section .init, size 0x40 lma 197d8
=>  Loading section .fini, size 0x20 lma 19818
=>  Loading section .rodata, size 0x298c lma 19838
=>  Loading section .eh_frame_hdr, size 0xfe4 lma 1c1c4
=>  Loading section .eh_frame, size 0x53c4 lma 1d1a8
=>  Loading section .ctors, size 0x8 lma 2256c
=>  Loading section .dtors, size 0x8 lma 22574
=>  Loading section .got2, size 0x2c lma 2257c
=>  Loading section .rtemsroset, size 0x80 lma 225a8
=>  Loading section .data, size 0x47c lma 22628
=>  Loading section .sdata, size 0xa9 lma 22aa8
=>  Start address 4
=>  Transfer rate: 1137256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical14.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1707/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1698 W:0    | mipstx39/jmr3904: spintrcritical15.exe
Result: invalid   
Time: 0:00:00.258140 spintrcritical15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical15.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a69c lma 0
=>  Loading section .init, size 0x40 lma 1a69c
=>  Loading section .fini, size 0x20 lma 1a6dc
=>  Loading section .rodata, size 0x29c4 lma 1a700
=>  Loading section .eh_frame_hdr, size 0x105c lma 1d0c4
=>  Loading section .eh_frame, size 0x56c0 lma 1e120
=>  Loading section .ctors, size 0x8 lma 237e0
=>  Loading section .dtors, size 0x8 lma 237e8
=>  Loading section .got2, size 0x2c lma 237f0
=>  Loading section .rtemsroset, size 0x80 lma 2381c
=>  Loading section .data, size 0x47c lma 238a0
=>  Loading section .sdata, size 0xad lma 23d20
=>  Start address 4
=>  Transfer rate: 1175048 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical15.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1708/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1699 W:0    | mipstx39/jmr3904: spintrcritical16.exe
Result: invalid   
Time: 0:00:00.259551 spintrcritical16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a5c0 lma 0
=>  Loading section .init, size 0x40 lma 1a5c0
=>  Loading section .fini, size 0x20 lma 1a600
=>  Loading section .rodata, size 0x299c lma 1a620
=>  Loading section .eh_frame_hdr, size 0x1054 lma 1cfbc
=>  Loading section .eh_frame, size 0x5684 lma 1e010
=>  Loading section .ctors, size 0x8 lma 23694
=>  Loading section .dtors, size 0x8 lma 2369c
=>  Loading section .got2, size 0x2c lma 236a4
=>  Loading section .rtemsroset, size 0x80 lma 236d0
=>  Loading section .data, size 0x47c lma 23750
=>  Loading section .sdata, size 0xad lma 23bd0
=>  Start address 4
=>  Transfer rate: 1172424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1709/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1699 W:0    | mipstx39/jmr3904: spintrcritical18.exe
Result: invalid   
Time: 0:00:00.254646 spintrcritical18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical18.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x198f4 lma 0
=>  Loading section .init, size 0x40 lma 198f4
=>  Loading section .fini, size 0x20 lma 19934
=>  Loading section .rodata, size 0x29d8 lma 19958
=>  Loading section .eh_frame_hdr, size 0xfe4 lma 1c330
=>  Loading section .eh_frame, size 0x53a8 lma 1d314
=>  Loading section .ctors, size 0x8 lma 226bc
=>  Loading section .dtors, size 0x8 lma 226c4
=>  Loading section .got2, size 0x2c lma 226cc
=>  Loading section .rtemsroset, size 0x7c lma 226f8
=>  Loading section .data, size 0x454 lma 22778
=>  Loading section .sdata, size 0xa9 lma 22bd0
=>  Start address 4
=>  Transfer rate: 1139560 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical18.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1710/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1699 W:0    | mipstx39/jmr3904: spintrcritical20.exe
Result: invalid   
Time: 0:00:00.310536 spintrcritical20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical20.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1ab3c lma 0
=>  Loading section .init, size 0x40 lma 1ab3c
=>  Loading section .fini, size 0x20 lma 1ab7c
=>  Loading section .rodata, size 0x29fc lma 1aba0
=>  Loading section .eh_frame_hdr, size 0x1094 lma 1d59c
=>  Loading section .eh_frame, size 0x57b4 lma 1e630
=>  Loading section .ctors, size 0x8 lma 23de4
=>  Loading section .dtors, size 0x8 lma 23dec
=>  Loading section .got2, size 0x2c lma 23df4
=>  Loading section .rtemsroset, size 0x80 lma 23e20
=>  Loading section .data, size 0x47c lma 23ea0
=>  Loading section .sdata, size 0xad lma 24320
=>  Start address 4
=>  Transfer rate: 1187368 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical20.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1711/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1705 W:0    | mipstx39/jmr3904: spintrcritical21.exe
Result: invalid   
Time: 0:00:00.261012 spintrcritical21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical21.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1982c lma 0
=>  Loading section .init, size 0x40 lma 1982c
=>  Loading section .fini, size 0x20 lma 1986c
=>  Loading section .rodata, size 0x29bc lma 19890
=>  Loading section .eh_frame_hdr, size 0xfcc lma 1c24c
=>  Loading section .eh_frame, size 0x5350 lma 1d218
=>  Loading section .ctors, size 0x8 lma 22568
=>  Loading section .dtors, size 0x8 lma 22570
=>  Loading section .got2, size 0x2c lma 22578
=>  Loading section .rtemsroset, size 0x80 lma 225a4
=>  Loading section .data, size 0x464 lma 22628
=>  Loading section .sdata, size 0xa9 lma 22a90
=>  Start address 4
=>  Transfer rate: 1137000 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical21.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1712/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1705 W:0    | mipstx39/jmr3904: spintrcritical22.exe
Result: invalid   
Time: 0:00:00.270156 spintrcritical22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical22.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a828 lma 0
=>  Loading section .init, size 0x40 lma 1a828
=>  Loading section .fini, size 0x20 lma 1a868
=>  Loading section .rodata, size 0x2a08 lma 1a888
=>  Loading section .eh_frame_hdr, size 0x105c lma 1d290
=>  Loading section .eh_frame, size 0x56a8 lma 1e2ec
=>  Loading section .ctors, size 0x8 lma 23994
=>  Loading section .dtors, size 0x8 lma 2399c
=>  Loading section .got2, size 0x2c lma 239a4
=>  Loading section .rtemsroset, size 0x80 lma 239d0
=>  Loading section .data, size 0x47c lma 23a50
=>  Loading section .sdata, size 0xad lma 23ed0
=>  Start address 4
=>  Transfer rate: 1178568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical22.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1713/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1706 W:0    | mipstx39/jmr3904: spintrcritical23.exe
Result: invalid   
Time: 0:00:00.259124 spintrcritical23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical23.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19390 lma 0
=>  Loading section .init, size 0x40 lma 19390
=>  Loading section .fini, size 0x20 lma 193d0
=>  Loading section .rodata, size 0x29a0 lma 193f0
=>  Loading section .eh_frame_hdr, size 0xf8c lma 1bd90
=>  Loading section .eh_frame, size 0x51e4 lma 1cd1c
=>  Loading section .ctors, size 0x8 lma 21f00
=>  Loading section .dtors, size 0x8 lma 21f08
=>  Loading section .got2, size 0x2c lma 21f10
=>  Loading section .rtemsroset, size 0x7c lma 21f3c
=>  Loading section .data, size 0x454 lma 21fb8
=>  Loading section .sdata, size 0xa9 lma 22410
=>  Start address 4
=>  Transfer rate: 1123752 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical23.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1714/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1705 W:0    | mipstx39/jmr3904: spintrcritical24.exe
Result: invalid   
Time: 0:00:00.254128 spintrcritical24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical24.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spintrcritical24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1a020 lma 0
=>  Loading section .init, size 0x40 lma 1a020
=>  Loading section .fini, size 0x20 lma 1a060
=>  Loading section .rodata, size 0x3070 lma 1a080
=>  Loading section .eh_frame_hdr, size 0x1004 lma 1d0f0
=>  Loading section .eh_frame, size 0x54b8 lma 1e0f4
=>  Loading section .ctors, size 0x8 lma 235ac
=>  Loading section .dtors, size 0x8 lma 235b4
=>  Loading section .got2, size 0x2c lma 235bc
=>  Loading section .rtemsroset, size 0x7c lma 235e8
=>  Loading section .data, size 0x44c lma 23668
=>  Loading section .sdata, size 0xb5 lma 23ab8
=>  Start address 4
=>  Transfer rate: 1170216 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical24.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1715/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1705 W:0    | mipstx39/jmr3904: splinkersets01.exe
Result: invalid   
Time: 0:00:00.304822 splinkersets01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/splinkersets01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/splinkersets01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ad4 lma 0
=>  Loading section .init, size 0x40 lma 13ad4
=>  Loading section .fini, size 0x20 lma 13b14
=>  Loading section .rodata, size 0x2734 lma 13b38
=>  Loading section .eh_frame_hdr, size 0xbdc lma 1626c
=>  Loading section .eh_frame, size 0x3e00 lma 16e48
=>  Loading section .ctors, size 0x8 lma 1ac48
=>  Loading section .dtors, size 0x8 lma 1ac50
=>  Loading section .got2, size 0x2c lma 1ac58
=>  Loading section .rtemsroset, size 0xa4 lma 1ac84
=>  Loading section .data, size 0x34c lma 1ad28
=>  Loading section .rtemsrwset, size 0x34 lma 1b074
=>  Loading section .sdata, size 0x9d lma 1b0a8
=>  Start address 4
=>  Transfer rate: 887304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/splinkersets01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1716/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1706 W:0    | mipstx39/jmr3904: spmisc01.exe
Result: invalid   
Time: 0:00:00.255501 spmisc01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spmisc01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spmisc01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12f78 lma 0
=>  Loading section .init, size 0x40 lma 12f78
=>  Loading section .fini, size 0x20 lma 12fb8
=>  Loading section .rodata, size 0x2000 lma 12fd8
=>  Loading section .eh_frame_hdr, size 0xc04 lma 14fd8
=>  Loading section .eh_frame, size 0x3e5c lma 15bdc
=>  Loading section .ctors, size 0x8 lma 19a38
=>  Loading section .dtors, size 0x8 lma 19a40
=>  Loading section .got2, size 0x2c lma 19a48
=>  Loading section .rtemsroset, size 0x70 lma 19a74
=>  Loading section .data, size 0x34c lma 19ae8
=>  Loading section .sdata, size 0x91 lma 19e34
=>  Start address 4
=>  Transfer rate: 849416 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spmisc01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1717/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1708 W:0    | mipstx39/jmr3904: spmkdir.exe
Result: invalid   
Time: 0:00:00.276421 spmkdir.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spmkdir.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spmkdir.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x136b0 lma 0
=>  Loading section .init, size 0x40 lma 136b0
=>  Loading section .fini, size 0x20 lma 136f0
=>  Loading section .rodata, size 0x2140 lma 13710
=>  Loading section .eh_frame_hdr, size 0xc44 lma 15850
=>  Loading section .eh_frame, size 0x400c lma 16494
=>  Loading section .ctors, size 0x8 lma 1a4a0
=>  Loading section .dtors, size 0x8 lma 1a4a8
=>  Loading section .got2, size 0x2c lma 1a4b0
=>  Loading section .rtemsroset, size 0x6c lma 1a4dc
=>  Loading section .data, size 0x348 lma 1a548
=>  Loading section .sdata, size 0x99 lma 1a890
=>  Start address 4
=>  Transfer rate: 870728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spmkdir.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1718/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1710 W:0    | mipstx39/jmr3904: spmountmgr01.exe
Result: invalid   
Time: 0:00:00.262764 spmountmgr01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spmountmgr01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spmountmgr01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13c78 lma 0
=>  Loading section .init, size 0x40 lma 13c78
=>  Loading section .fini, size 0x20 lma 13cb8
=>  Loading section .rodata, size 0x21f0 lma 13cd8
=>  Loading section .eh_frame_hdr, size 0xc6c lma 15ec8
=>  Loading section .eh_frame, size 0x4124 lma 16b34
=>  Loading section .ctors, size 0x8 lma 1ac58
=>  Loading section .dtors, size 0x8 lma 1ac60
=>  Loading section .got2, size 0x2c lma 1ac68
=>  Loading section .rtemsroset, size 0x6c lma 1ac94
=>  Loading section .data, size 0x34c lma 1ad00
=>  Loading section .sdata, size 0x91 lma 1b04c
=>  Start address 4
=>  Transfer rate: 886504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spmountmgr01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1719/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1708 W:0    | mipstx39/jmr3904: spmrsp01.exe
Result: invalid   
Time: 0:00:00.255573 spmrsp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spmrsp01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spmrsp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16868 lma 0
=>  Loading section .init, size 0x40 lma 16868
=>  Loading section .fini, size 0x20 lma 168a8
=>  Loading section .rodata, size 0x2218 lma 168c8
=>  Loading section .eh_frame_hdr, size 0xe04 lma 18ae0
=>  Loading section .eh_frame, size 0x4a1c lma 198e4
=>  Loading section .ctors, size 0x8 lma 1e300
=>  Loading section .dtors, size 0x8 lma 1e308
=>  Loading section .got2, size 0x2c lma 1e310
=>  Loading section .rtemsroset, size 0x74 lma 1e33c
=>  Loading section .data, size 0x3c4 lma 1e3b0
=>  Loading section .sdata, size 0xad lma 1e778
=>  Start address 4
=>  Transfer rate: 999688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spmrsp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1720/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1714 W:0    | mipstx39/jmr3904: spmsgq_err01.exe
Result: invalid   
Time: 0:00:00.273279 spmsgq_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spmsgq_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spmsgq_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16c24 lma 0
=>  Loading section .init, size 0x40 lma 16c24
=>  Loading section .fini, size 0x20 lma 16c64
=>  Loading section .rodata, size 0x3060 lma 16c88
=>  Loading section .eh_frame_hdr, size 0xda4 lma 19ce8
=>  Loading section .eh_frame, size 0x47a4 lma 1aa8c
=>  Loading section .ctors, size 0x8 lma 1f230
=>  Loading section .dtors, size 0x8 lma 1f238
=>  Loading section .got2, size 0x2c lma 1f240
=>  Loading section .rtemsroset, size 0x74 lma 1f26c
=>  Loading section .data, size 0x394 lma 1f2e0
=>  Loading section .sdata, size 0xa9 lma 1f678
=>  Start address 4
=>  Transfer rate: 1030344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spmsgq_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1721/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1716 W:0    | mipstx39/jmr3904: spmsgq_err02.exe
Result: invalid   
Time: 0:00:00.261716 spmsgq_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spmsgq_err02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spmsgq_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15e04 lma 0
=>  Loading section .init, size 0x40 lma 15e04
=>  Loading section .fini, size 0x20 lma 15e44
=>  Loading section .rodata, size 0x286c lma 15e68
=>  Loading section .eh_frame_hdr, size 0xd74 lma 186d4
=>  Loading section .eh_frame, size 0x4638 lma 19448
=>  Loading section .ctors, size 0x8 lma 1da80
=>  Loading section .dtors, size 0x8 lma 1da88
=>  Loading section .got2, size 0x2c lma 1da90
=>  Loading section .rtemsroset, size 0x74 lma 1dabc
=>  Loading section .data, size 0x394 lma 1db30
=>  Loading section .sdata, size 0xa9 lma 1dec8
=>  Start address 4
=>  Transfer rate: 981832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spmsgq_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1722/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1716 W:0    | mipstx39/jmr3904: spmutex01.exe
Result: invalid   
Time: 0:00:00.296203 spmutex01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spmutex01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spmutex01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x180e0 lma 0
=>  Loading section .init, size 0x40 lma 180e0
=>  Loading section .fini, size 0x20 lma 18120
=>  Loading section .rodata, size 0x21b8 lma 18140
=>  Loading section .eh_frame_hdr, size 0xee4 lma 1a2f8
=>  Loading section .eh_frame, size 0x4e40 lma 1b1dc
=>  Loading section .ctors, size 0x8 lma 2001c
=>  Loading section .dtors, size 0x8 lma 20024
=>  Loading section .got2, size 0x2c lma 2002c
=>  Loading section .rtemsroset, size 0x74 lma 20058
=>  Loading section .data, size 0x3c4 lma 200d0
=>  Loading section .sdata, size 0xad lma 20498
=>  Start address 4
=>  Transfer rate: 1059304 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spmutex01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1723/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1716 W:0    | mipstx39/jmr3904: spnsext01.exe
Result: invalid   
Time: 0:00:00.263915 spnsext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spnsext01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spnsext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14008 lma 0
=>  Loading section .init, size 0x40 lma 14008
=>  Loading section .fini, size 0x20 lma 14048
=>  Loading section .rodata, size 0x1fc8 lma 14068
=>  Loading section .eh_frame_hdr, size 0xc84 lma 16030
=>  Loading section .eh_frame, size 0x4118 lma 16cb4
=>  Loading section .ctors, size 0x8 lma 1adcc
=>  Loading section .dtors, size 0x8 lma 1add4
=>  Loading section .got2, size 0x2c lma 1addc
=>  Loading section .rtemsroset, size 0x70 lma 1ae08
=>  Loading section .data, size 0x368 lma 1ae78
=>  Loading section .sdata, size 0xa9 lma 1b1e0
=>  Start address 4
=>  Transfer rate: 889928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spnsext01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1724/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1716 W:0    | mipstx39/jmr3904: spntp01.exe
Result: invalid   
Time: 0:00:00.275842 spntp01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spntp01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spntp01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18990 lma 0
=>  Loading section .init, size 0x40 lma 18990
=>  Loading section .fini, size 0x20 lma 189d0
=>  Loading section .rodata, size 0x2964 lma 189f0
=>  Loading section .eh_frame_hdr, size 0xed4 lma 1b354
=>  Loading section .eh_frame, size 0x4f34 lma 1c228
=>  Loading section .ctors, size 0x8 lma 2115c
=>  Loading section .dtors, size 0x8 lma 21164
=>  Loading section .got2, size 0x2c lma 2116c
=>  Loading section .rtemsroset, size 0x7c lma 21198
=>  Loading section .data, size 0x38c lma 21218
=>  Loading section .sdata, size 0xb1 lma 215a4
=>  Start address 4
=>  Transfer rate: 1094280 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spntp01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1725/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1716 W:0    | mipstx39/jmr3904: spobjgetnext.exe
Result: invalid   
Time: 0:00:00.260791 spobjgetnext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spobjgetnext.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spobjgetnext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14068 lma 0
=>  Loading section .init, size 0x40 lma 14068
=>  Loading section .fini, size 0x20 lma 140a8
=>  Loading section .rodata, size 0x2048 lma 140c8
=>  Loading section .eh_frame_hdr, size 0xca4 lma 16110
=>  Loading section .eh_frame, size 0x41ac lma 16db4
=>  Loading section .ctors, size 0x8 lma 1af60
=>  Loading section .dtors, size 0x8 lma 1af68
=>  Loading section .got2, size 0x2c lma 1af70
=>  Loading section .rtemsroset, size 0x70 lma 1af9c
=>  Loading section .data, size 0x364 lma 1b010
=>  Loading section .sdata, size 0xa9 lma 1b378
=>  Start address 4
=>  Transfer rate: 893128 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spobjgetnext.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1726/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1716 W:0    | mipstx39/jmr3904: sppagesize.exe
Result: invalid   
Time: 0:00:00.252369 sppagesize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sppagesize.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sppagesize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12d38 lma 0
=>  Loading section .init, size 0x40 lma 12d38
=>  Loading section .fini, size 0x20 lma 12d78
=>  Loading section .rodata, size 0x1f00 lma 12d98
=>  Loading section .eh_frame_hdr, size 0xbec lma 14c98
=>  Loading section .eh_frame, size 0x3e0c lma 15884
=>  Loading section .ctors, size 0x8 lma 19690
=>  Loading section .dtors, size 0x8 lma 19698
=>  Loading section .got2, size 0x2c lma 196a0
=>  Loading section .rtemsroset, size 0x6c lma 196cc
=>  Loading section .data, size 0x34c lma 19738
=>  Loading section .sdata, size 0x91 lma 19a84
=>  Start address 4
=>  Transfer rate: 841896 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sppagesize.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1727/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1716 W:0    | mipstx39/jmr3904: sppartition_err01.exe
Result: invalid   
Time: 0:00:00.252183 sppartition_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sppartition_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sppartition_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x154a8 lma 0
=>  Loading section .init, size 0x40 lma 154a8
=>  Loading section .fini, size 0x20 lma 154e8
=>  Loading section .rodata, size 0x2b5c lma 15508
=>  Loading section .eh_frame_hdr, size 0xcdc lma 18064
=>  Loading section .eh_frame, size 0x4324 lma 18d40
=>  Loading section .ctors, size 0x8 lma 1d064
=>  Loading section .dtors, size 0x8 lma 1d06c
=>  Loading section .got2, size 0x2c lma 1d074
=>  Loading section .rtemsroset, size 0x74 lma 1d0a0
=>  Loading section .data, size 0x394 lma 1d118
=>  Loading section .sdata, size 0xa9 lma 1d4b0
=>  Start address 4
=>  Transfer rate: 961160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sppartition_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1728/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1723 W:0    | mipstx39/jmr3904: sppercpudata01.exe
Result: invalid   
Time: 0:00:00.274064 sppercpudata01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sppercpudata01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sppercpudata01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ab8 lma 0
=>  Loading section .init, size 0x40 lma 13ab8
=>  Loading section .fini, size 0x20 lma 13af8
=>  Loading section .rodata, size 0x2064 lma 13b18
=>  Loading section .eh_frame_hdr, size 0xc04 lma 15b7c
=>  Loading section .eh_frame, size 0x40d0 lma 16780
=>  Loading section .ctors, size 0x8 lma 1a850
=>  Loading section .dtors, size 0x8 lma 1a858
=>  Loading section .got2, size 0x2c lma 1a860
=>  Loading section .rtemsroset, size 0x6c lma 1a88c
=>  Loading section .data, size 0x34c lma 1a8f8
=>  Loading section .rtemsrwset, size 0x48 lma 1ac48
=>  Loading section .sdata, size 0x95 lma 1ac90
=>  Start address 4
=>  Transfer rate: 878856 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sppercpudata01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1729/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1724 W:0    | mipstx39/jmr3904: spport_err01.exe
Result: invalid   
Time: 0:00:00.579602 spport_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spport_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spport_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14964 lma 0
=>  Loading section .init, size 0x40 lma 14964
=>  Loading section .fini, size 0x20 lma 149a4
=>  Loading section .rodata, size 0x2640 lma 149c8
=>  Loading section .eh_frame_hdr, size 0xcdc lma 17008
=>  Loading section .eh_frame, size 0x42d4 lma 17ce4
=>  Loading section .ctors, size 0x8 lma 1bfb8
=>  Loading section .dtors, size 0x8 lma 1bfc0
=>  Loading section .got2, size 0x2c lma 1bfc8
=>  Loading section .rtemsroset, size 0x74 lma 1bff4
=>  Loading section .data, size 0x394 lma 1c068
=>  Loading section .sdata, size 0xa5 lma 1c400
=>  Start address 4
=>  Transfer rate: 926952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spport_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1730/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1724 W:0    | mipstx39/jmr3904: sppps01.exe
Result: invalid   
Time: 0:00:00.511853 sppps01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sppps01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sppps01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x190d4 lma 0
=>  Loading section .init, size 0x40 lma 190d4
=>  Loading section .fini, size 0x20 lma 19114
=>  Loading section .rodata, size 0x2950 lma 19138
=>  Loading section .eh_frame_hdr, size 0xf8c lma 1ba88
=>  Loading section .eh_frame, size 0x51d8 lma 1ca14
=>  Loading section .ctors, size 0x8 lma 21bec
=>  Loading section .dtors, size 0x8 lma 21bf4
=>  Loading section .got2, size 0x2c lma 21bfc
=>  Loading section .rtemsroset, size 0x84 lma 21c28
=>  Loading section .data, size 0x3c8 lma 21cb0
=>  Loading section .sdata, size 0xb9 lma 22078
=>  Start address 4
=>  Transfer rate: 1116488 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sppps01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1731/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1724 W:0    | mipstx39/jmr3904: spprintk.exe
Result: invalid   
Time: 0:00:00.273457 spprintk.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spprintk.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spprintk.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13114 lma 0
=>  Loading section .init, size 0x40 lma 13114
=>  Loading section .fini, size 0x20 lma 13154
=>  Loading section .rodata, size 0x2927 lma 13178
=>  Loading section .eh_frame_hdr, size 0xb74 lma 15aa0
=>  Loading section .eh_frame, size 0x3b54 lma 16614
=>  Loading section .ctors, size 0x8 lma 1a168
=>  Loading section .dtors, size 0x8 lma 1a170
=>  Loading section .got2, size 0x2c lma 1a178
=>  Loading section .rtemsroset, size 0x64 lma 1a1a4
=>  Loading section .data, size 0x30c lma 1a208
=>  Loading section .sdata, size 0x89 lma 1a514
=>  Start address 4
=>  Transfer rate: 863424 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spprintk.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1732/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1724 W:0    | mipstx39/jmr3904: spprivenv01.exe
Result: invalid   
Time: 0:00:00.274604 spprivenv01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spprivenv01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spprivenv01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x151a0 lma 0
=>  Loading section .init, size 0x40 lma 151a0
=>  Loading section .fini, size 0x20 lma 151e0
=>  Loading section .rodata, size 0x26ba lma 15200
=>  Loading section .eh_frame_hdr, size 0xd7c lma 178bc
=>  Loading section .eh_frame, size 0x45c8 lma 18638
=>  Loading section .ctors, size 0x8 lma 1cc00
=>  Loading section .dtors, size 0x8 lma 1cc08
=>  Loading section .got2, size 0x2c lma 1cc10
=>  Loading section .rtemsroset, size 0x74 lma 1cc3c
=>  Loading section .data, size 0x3ac lma 1ccb0
=>  Loading section .sdata, size 0xa9 lma 1d060
=>  Start address 4
=>  Transfer rate: 952344 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spprivenv01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1733/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1724 W:0    | mipstx39/jmr3904: spprofiling01.exe
Result: invalid   
Time: 0:00:00.316891 spprofiling01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spprofiling01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spprofiling01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13f84 lma 0
=>  Loading section .init, size 0x40 lma 13f84
=>  Loading section .fini, size 0x20 lma 13fc4
=>  Loading section .rodata, size 0x2038 lma 13fe8
=>  Loading section .eh_frame_hdr, size 0xc7c lma 16020
=>  Loading section .eh_frame, size 0x411c lma 16c9c
=>  Loading section .ctors, size 0x8 lma 1adb8
=>  Loading section .dtors, size 0x8 lma 1adc0
=>  Loading section .got2, size 0x2c lma 1adc8
=>  Loading section .rtemsroset, size 0x70 lma 1adf4
=>  Loading section .data, size 0x368 lma 1ae68
=>  Loading section .sdata, size 0xa9 lma 1b1d0
=>  Start address 4
=>  Transfer rate: 889736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spprofiling01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1734/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1724 W:0    | mipstx39/jmr3904: spqreslib.exe
Result: invalid   
Time: 0:00:00.294605 spqreslib.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spqreslib.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spqreslib.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17114 lma 0
=>  Loading section .init, size 0x40 lma 17114
=>  Loading section .fini, size 0x20 lma 17154
=>  Loading section .rodata, size 0x2c24 lma 17178
=>  Loading section .eh_frame_hdr, size 0xe5c lma 19d9c
=>  Loading section .eh_frame, size 0x4bdc lma 1abf8
=>  Loading section .tdata, size 0xc lma 1f7d4
=>  Loading section .ctors, size 0x8 lma 1f7e0
=>  Loading section .dtors, size 0x8 lma 1f7e8
=>  Loading section .got2, size 0x2c lma 1f7f0
=>  Loading section .rtemsroset, size 0x74 lma 1f81c
=>  Loading section .data, size 0x3a0 lma 1f890
=>  Loading section .sdata, size 0xa9 lma 1fc30
=>  Start address 4
=>  Transfer rate: 1042088 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spqreslib.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1735/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1724 W:0    | mipstx39/jmr3904: spratemon_err01.exe
Result: invalid   
Time: 0:00:00.278404 spratemon_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spratemon_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spratemon_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16184 lma 0
=>  Loading section .init, size 0x40 lma 16184
=>  Loading section .fini, size 0x20 lma 161c4
=>  Loading section .rodata, size 0x2d00 lma 161e8
=>  Loading section .eh_frame_hdr, size 0xd3c lma 18ee8
=>  Loading section .eh_frame, size 0x4528 lma 19c24
=>  Loading section .ctors, size 0x8 lma 1e14c
=>  Loading section .dtors, size 0x8 lma 1e154
=>  Loading section .got2, size 0x2c lma 1e15c
=>  Loading section .rtemsroset, size 0x74 lma 1e188
=>  Loading section .data, size 0x394 lma 1e200
=>  Loading section .sdata, size 0xad lma 1e598
=>  Start address 4
=>  Transfer rate: 995784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spratemon_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1736/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1729 W:0    | mipstx39/jmr3904: sprbtree01.exe
Result: invalid   
Time: 0:00:00.253452 sprbtree01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sprbtree01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sprbtree01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15218 lma 0
=>  Loading section .init, size 0x40 lma 15218
=>  Loading section .fini, size 0x20 lma 15258
=>  Loading section .rodata, size 0x7494 lma 15278
=>  Loading section .eh_frame_hdr, size 0xc84 lma 1c70c
=>  Loading section .eh_frame, size 0x4250 lma 1d390
=>  Loading section .ctors, size 0x8 lma 215e0
=>  Loading section .dtors, size 0x8 lma 215e8
=>  Loading section .got2, size 0x2c lma 215f0
=>  Loading section .rtemsroset, size 0x6c lma 2161c
=>  Loading section .data, size 0x3dc lma 21688
=>  Loading section .sdata, size 0x91 lma 21a64
=>  Start address 4
=>  Transfer rate: 1103784 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sprbtree01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1737/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1729 W:0    | mipstx39/jmr3904: spregion_err01.exe
Result: invalid   
Time: 0:00:00.277670 spregion_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spregion_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spregion_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16de8 lma 0
=>  Loading section .init, size 0x40 lma 16de8
=>  Loading section .fini, size 0x20 lma 16e28
=>  Loading section .rodata, size 0x2f18 lma 16e48
=>  Loading section .eh_frame_hdr, size 0xdb4 lma 19d60
=>  Loading section .eh_frame, size 0x47b4 lma 1ab14
=>  Loading section .ctors, size 0x8 lma 1f2c8
=>  Loading section .dtors, size 0x8 lma 1f2d0
=>  Loading section .got2, size 0x2c lma 1f2d8
=>  Loading section .rtemsroset, size 0x74 lma 1f304
=>  Loading section .data, size 0x394 lma 1f378
=>  Loading section .sdata, size 0xad lma 1f710
=>  Start address 4
=>  Transfer rate: 1031624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spregion_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1738/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1730 W:0    | mipstx39/jmr3904: sprmsched01.exe
Result: invalid   
Time: 0:00:00.309911 sprmsched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sprmsched01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sprmsched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x153a8 lma 0
=>  Loading section .init, size 0x40 lma 153a8
=>  Loading section .fini, size 0x20 lma 153e8
=>  Loading section .rodata, size 0x24f8 lma 15408
=>  Loading section .eh_frame_hdr, size 0xd54 lma 17900
=>  Loading section .eh_frame, size 0x45a4 lma 18654
=>  Loading section .ctors, size 0x8 lma 1cbf8
=>  Loading section .dtors, size 0x8 lma 1cc00
=>  Loading section .got2, size 0x2c lma 1cc08
=>  Loading section .rtemsroset, size 0x74 lma 1cc34
=>  Loading section .data, size 0x394 lma 1cca8
=>  Loading section .sdata, size 0xc1 lma 1d040
=>  Start address 4
=>  Transfer rate: 952296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sprmsched01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1739/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1730 W:0    | mipstx39/jmr3904: sprmsched02.exe
Result: invalid   
Time: 0:00:00.292717 sprmsched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sprmsched02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sprmsched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ca8 lma 0
=>  Loading section .init, size 0x40 lma 14ca8
=>  Loading section .fini, size 0x20 lma 14ce8
=>  Loading section .rodata, size 0x24d0 lma 14d08
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 171d8
=>  Loading section .eh_frame, size 0x442c lma 17ecc
=>  Loading section .ctors, size 0x8 lma 1c2f8
=>  Loading section .dtors, size 0x8 lma 1c300
=>  Loading section .got2, size 0x2c lma 1c308
=>  Loading section .rtemsroset, size 0x74 lma 1c334
=>  Loading section .data, size 0x394 lma 1c3a8
=>  Loading section .sdata, size 0xa9 lma 1c740
=>  Start address 4
=>  Transfer rate: 933672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sprmsched02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1740/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1730 W:0    | mipstx39/jmr3904: spscheduler01.exe
Result: invalid   
Time: 0:00:00.312781 spscheduler01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spscheduler01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spscheduler01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19274 lma 0
=>  Loading section .init, size 0x40 lma 19274
=>  Loading section .fini, size 0x20 lma 192b4
=>  Loading section .rodata, size 0x2408 lma 192d8
=>  Loading section .eh_frame_hdr, size 0xee4 lma 1b6e0
=>  Loading section .eh_frame, size 0x4e98 lma 1c5c4
=>  Loading section .ctors, size 0x8 lma 2145c
=>  Loading section .dtors, size 0x8 lma 21464
=>  Loading section .got2, size 0x2c lma 2146c
=>  Loading section .rtemsroset, size 0x74 lma 21498
=>  Loading section .data, size 0x3c4 lma 21510
=>  Loading section .sdata, size 0xb1 lma 218d8
=>  Start address 4
=>  Transfer rate: 1100776 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spscheduler01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1741/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1730 W:0    | mipstx39/jmr3904: spsem01.exe
Result: invalid   
Time: 0:00:00.274621 spsem01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsem01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsem01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15dc8 lma 0
=>  Loading section .init, size 0x40 lma 15dc8
=>  Loading section .fini, size 0x20 lma 15e08
=>  Loading section .rodata, size 0x2630 lma 15e28
=>  Loading section .eh_frame_hdr, size 0xd8c lma 18458
=>  Loading section .eh_frame, size 0x46f4 lma 191e4
=>  Loading section .ctors, size 0x8 lma 1d8d8
=>  Loading section .dtors, size 0x8 lma 1d8e0
=>  Loading section .got2, size 0x2c lma 1d8e8
=>  Loading section .rtemsroset, size 0x74 lma 1d914
=>  Loading section .data, size 0x394 lma 1d988
=>  Loading section .sdata, size 0xb5 lma 1dd20
=>  Start address 4
=>  Transfer rate: 978568 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsem01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1742/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1734 W:0    | mipstx39/jmr3904: spsem02.exe
Result: invalid   
Time: 0:00:00.560605 spsem02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsem02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsem02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16208 lma 0
=>  Loading section .init, size 0x40 lma 16208
=>  Loading section .fini, size 0x20 lma 16248
=>  Loading section .rodata, size 0x26f0 lma 16268
=>  Loading section .eh_frame_hdr, size 0xd94 lma 18958
=>  Loading section .eh_frame, size 0x4770 lma 196ec
=>  Loading section .ctors, size 0x8 lma 1de5c
=>  Loading section .dtors, size 0x8 lma 1de64
=>  Loading section .got2, size 0x2c lma 1de6c
=>  Loading section .rtemsroset, size 0x74 lma 1de98
=>  Loading section .data, size 0x394 lma 1df10
=>  Loading section .sdata, size 0xb5 lma 1e2a8
=>  Start address 4
=>  Transfer rate: 989864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsem02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1743/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1734 W:0    | mipstx39/jmr3904: spsem03.exe
Result: invalid   
Time: 0:00:00.307849 spsem03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsem03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsem03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14e48 lma 0
=>  Loading section .init, size 0x40 lma 14e48
=>  Loading section .fini, size 0x20 lma 14e88
=>  Loading section .rodata, size 0x1fcc lma 14ea8
=>  Loading section .eh_frame_hdr, size 0xd54 lma 16e74
=>  Loading section .eh_frame, size 0x459c lma 17bc8
=>  Loading section .ctors, size 0x8 lma 1c164
=>  Loading section .dtors, size 0x8 lma 1c16c
=>  Loading section .got2, size 0x2c lma 1c174
=>  Loading section .rtemsroset, size 0x74 lma 1c1a0
=>  Loading section .data, size 0x394 lma 1c218
=>  Loading section .sdata, size 0xb5 lma 1c5b0
=>  Start address 4
=>  Transfer rate: 930536 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsem03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1744/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1736 W:0    | mipstx39/jmr3904: spsem_err01.exe
Result: invalid   
Time: 0:00:00.525789 spsem_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsem_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsem_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15e08 lma 0
=>  Loading section .init, size 0x40 lma 15e08
=>  Loading section .fini, size 0x20 lma 15e48
=>  Loading section .rodata, size 0x2a64 lma 15e68
=>  Loading section .eh_frame_hdr, size 0xd64 lma 188cc
=>  Loading section .eh_frame, size 0x4588 lma 19630
=>  Loading section .ctors, size 0x8 lma 1dbb8
=>  Loading section .dtors, size 0x8 lma 1dbc0
=>  Loading section .got2, size 0x2c lma 1dbc8
=>  Loading section .rtemsroset, size 0x74 lma 1dbf4
=>  Loading section .data, size 0x394 lma 1dc68
=>  Loading section .sdata, size 0xa9 lma 1e000
=>  Start address 4
=>  Transfer rate: 984360 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsem_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1745/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1738 W:0    | mipstx39/jmr3904: spsem_err02.exe
Result: invalid   
Time: 0:00:00.513604 spsem_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsem_err02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsem_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15e28 lma 0
=>  Loading section .init, size 0x40 lma 15e28
=>  Loading section .fini, size 0x20 lma 15e68
=>  Loading section .rodata, size 0x28f4 lma 15e88
=>  Loading section .eh_frame_hdr, size 0xd74 lma 1877c
=>  Loading section .eh_frame, size 0x4610 lma 194f0
=>  Loading section .ctors, size 0x8 lma 1db00
=>  Loading section .dtors, size 0x8 lma 1db08
=>  Loading section .got2, size 0x2c lma 1db10
=>  Loading section .rtemsroset, size 0x74 lma 1db3c
=>  Loading section .data, size 0x394 lma 1dbb0
=>  Loading section .sdata, size 0xa9 lma 1df48
=>  Start address 4
=>  Transfer rate: 982888 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsem_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1746/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1738 W:0    | mipstx39/jmr3904: spsignal_err01.exe
Result: invalid   
Time: 0:00:00.276370 spsignal_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsignal_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsignal_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14284 lma 0
=>  Loading section .init, size 0x40 lma 14284
=>  Loading section .fini, size 0x20 lma 142c4
=>  Loading section .rodata, size 0x242c lma 142e8
=>  Loading section .eh_frame_hdr, size 0xc9c lma 16714
=>  Loading section .eh_frame, size 0x418c lma 173b0
=>  Loading section .ctors, size 0x8 lma 1b53c
=>  Loading section .dtors, size 0x8 lma 1b544
=>  Loading section .got2, size 0x2c lma 1b54c
=>  Loading section .rtemsroset, size 0x70 lma 1b578
=>  Loading section .data, size 0x364 lma 1b5e8
=>  Loading section .sdata, size 0xa5 lma 1b950
=>  Start address 4
=>  Transfer rate: 905064 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsignal_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1747/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1738 W:0    | mipstx39/jmr3904: spsimplesched01.exe
Result: invalid   
Time: 0:00:00.285172 spsimplesched01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsimplesched01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsimplesched01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15488 lma 0
=>  Loading section .init, size 0x40 lma 15488
=>  Loading section .fini, size 0x20 lma 154c8
=>  Loading section .rodata, size 0x25dd lma 154e8
=>  Loading section .eh_frame_hdr, size 0xd74 lma 17ac8
=>  Loading section .eh_frame, size 0x4504 lma 1883c
=>  Loading section .ctors, size 0x8 lma 1cd40
=>  Loading section .dtors, size 0x8 lma 1cd48
=>  Loading section .got2, size 0x2c lma 1cd50
=>  Loading section .rtemsroset, size 0x70 lma 1cd7c
=>  Loading section .data, size 0x510 lma 1cdf0
=>  Loading section .sdata, size 0xb9 lma 1d300
=>  Start address 4
=>  Transfer rate: 957840 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsimplesched01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1748/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1738 W:0    | mipstx39/jmr3904: spsimplesched02.exe
Result: invalid   
Time: 0:00:00.571595 spsimplesched02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsimplesched02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsimplesched02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15568 lma 0
=>  Loading section .init, size 0x40 lma 15568
=>  Loading section .fini, size 0x20 lma 155a8
=>  Loading section .rodata, size 0x2550 lma 155c8
=>  Loading section .eh_frame_hdr, size 0xd84 lma 17b18
=>  Loading section .eh_frame, size 0x4660 lma 1889c
=>  Loading section .ctors, size 0x8 lma 1cefc
=>  Loading section .dtors, size 0x8 lma 1cf04
=>  Loading section .got2, size 0x2c lma 1cf0c
=>  Loading section .rtemsroset, size 0x74 lma 1cf38
=>  Loading section .data, size 0x394 lma 1cfb0
=>  Loading section .sdata, size 0xad lma 1d348
=>  Start address 4
=>  Transfer rate: 958312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsimplesched02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1749/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1738 W:0    | mipstx39/jmr3904: spsimplesched03.exe
Result: invalid   
Time: 0:00:00.369555 spsimplesched03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsimplesched03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsimplesched03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13ec8 lma 0
=>  Loading section .init, size 0x40 lma 13ec8
=>  Loading section .fini, size 0x20 lma 13f08
=>  Loading section .rodata, size 0x2398 lma 13f28
=>  Loading section .eh_frame_hdr, size 0xcc4 lma 162c0
=>  Loading section .eh_frame, size 0x4218 lma 16f84
=>  Loading section .ctors, size 0x8 lma 1b19c
=>  Loading section .dtors, size 0x8 lma 1b1a4
=>  Loading section .got2, size 0x2c lma 1b1ac
=>  Loading section .rtemsroset, size 0x74 lma 1b1d8
=>  Loading section .data, size 0x394 lma 1b250
=>  Loading section .sdata, size 0xa9 lma 1b5e8
=>  Start address 4
=>  Transfer rate: 898120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsimplesched03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1750/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1740 W:0    | mipstx39/jmr3904: spsize.exe
Result: invalid   
Time: 0:00:00.310803 spsize.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsize.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsize.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16140 lma 0
=>  Loading section .init, size 0x40 lma 16140
=>  Loading section .fini, size 0x20 lma 16180
=>  Loading section .rodata, size 0x2ac9 lma 161a0
=>  Loading section .eh_frame_hdr, size 0xdec lma 18c6c
=>  Loading section .eh_frame, size 0x48c0 lma 19a58
=>  Loading section .tdata, size 0xc lma 1e318
=>  Loading section .ctors, size 0x8 lma 1e324
=>  Loading section .dtors, size 0x8 lma 1e32c
=>  Loading section .got2, size 0x2c lma 1e334
=>  Loading section .rtemsroset, size 0x70 lma 1e360
=>  Loading section .data, size 0x374 lma 1e3d0
=>  Loading section .sdata, size 0xb1 lma 1e748
=>  Start address 4
=>  Transfer rate: 999312 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsize.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1751/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1740 W:0    | mipstx39/jmr3904: spstdc17.exe
Result: invalid   
Time: 0:00:00.313206 spstdc17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spstdc17.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spstdc17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12c18 lma 0
=>  Loading section .init, size 0x40 lma 12c18
=>  Loading section .fini, size 0x20 lma 12c58
=>  Loading section .rodata, size 0x1ea8 lma 12c78
=>  Loading section .eh_frame_hdr, size 0xbc4 lma 14b20
=>  Loading section .eh_frame, size 0x3d9c lma 156e4
=>  Loading section .ctors, size 0x8 lma 19480
=>  Loading section .dtors, size 0x8 lma 19488
=>  Loading section .got2, size 0x2c lma 19490
=>  Loading section .rtemsroset, size 0x6c lma 194bc
=>  Loading section .data, size 0x34c lma 19528
=>  Loading section .sdata, size 0x91 lma 19874
=>  Start address 4
=>  Transfer rate: 837672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spstdc17.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1752/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1745 W:0    | mipstx39/jmr3904: spstdthreads01.exe
Result: invalid   
Time: 0:00:00.306884 spstdthreads01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spstdthreads01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spstdthreads01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18088 lma 0
=>  Loading section .init, size 0x40 lma 18088
=>  Loading section .fini, size 0x20 lma 180c8
=>  Loading section .rodata, size 0x21ec lma 180e8
=>  Loading section .eh_frame_hdr, size 0xfe4 lma 1a2d4
=>  Loading section .eh_frame, size 0x5120 lma 1b2b8
=>  Loading section .ctors, size 0x8 lma 203d8
=>  Loading section .dtors, size 0x8 lma 203e0
=>  Loading section .got2, size 0x2c lma 203e8
=>  Loading section .rtemsroset, size 0x78 lma 20414
=>  Loading section .data, size 0x478 lma 20490
=>  Loading section .sdata, size 0xbd lma 20908
=>  Start address 4
=>  Transfer rate: 1068552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spstdthreads01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1753/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1745 W:0    | mipstx39/jmr3904: spstkalloc.exe
Result: invalid   
Time: 0:00:00.256157 spstkalloc.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spstkalloc.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spstkalloc.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x133c8 lma 0
=>  Loading section .init, size 0x40 lma 133c8
=>  Loading section .fini, size 0x20 lma 13408
=>  Loading section .rodata, size 0x23bc lma 13428
=>  Loading section .eh_frame_hdr, size 0xc3c lma 157e4
=>  Loading section .eh_frame, size 0x3f44 lma 16420
=>  Loading section .ctors, size 0x8 lma 1a364
=>  Loading section .dtors, size 0x8 lma 1a36c
=>  Loading section .got2, size 0x2c lma 1a374
=>  Loading section .rtemsroset, size 0x68 lma 1a3a0
=>  Loading section .data, size 0x348 lma 1a408
=>  Loading section .sdata, size 0x91 lma 1a750
=>  Start address 4
=>  Transfer rate: 868104 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spstkalloc.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1754/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1745 W:0    | mipstx39/jmr3904: spstkalloc02.exe
Result: invalid   
Time: 0:00:00.256530 spstkalloc02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spstkalloc02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spstkalloc02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xd280 lma 0
=>  Loading section .init, size 0x40 lma d280
=>  Loading section .fini, size 0x20 lma d2c0
=>  Loading section .rodata, size 0x1f4c lma d2e0
=>  Loading section .eh_frame_hdr, size 0x6b4 lma f22c
=>  Loading section .eh_frame, size 0x2354 lma f8e0
=>  Loading section .ctors, size 0x8 lma 11c34
=>  Loading section .dtors, size 0x8 lma 11c3c
=>  Loading section .got2, size 0x2c lma 11c44
=>  Loading section .rtemsroset, size 0x60 lma 11c70
=>  Loading section .data, size 0x238 lma 11cd0
=>  Loading section .sdata, size 0x88 lma 11f08
=>  Start address 4
=>  Transfer rate: 588928 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spstkalloc02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1755/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1745 W:0    | mipstx39/jmr3904: spstkalloc03.exe
Result: invalid   
Time: 0:00:00.262446 spstkalloc03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spstkalloc03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spstkalloc03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b274 lma 0
=>  Loading section .init, size 0x40 lma 1b274
=>  Loading section .fini, size 0x20 lma 1b2b4
=>  Loading section .rodata, size 0x253b lma 1b2d8
=>  Loading section .eh_frame_hdr, size 0xe8c lma 1d814
=>  Loading section .eh_frame, size 0x4fcc lma 1e6a0
=>  Loading section .tdata, size 0xc lma 2366c
=>  Loading section .ctors, size 0x8 lma 23678
=>  Loading section .dtors, size 0x8 lma 23680
=>  Loading section .got2, size 0x2c lma 23688
=>  Loading section .rtemsroset, size 0x6c lma 236b4
=>  Loading section .data, size 0x4ec lma 23720
=>  Loading section .sdata, size 0x99 lma 23c0c
=>  Start address 4
=>  Transfer rate: 1172736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spstkalloc03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1756/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1745 W:0    | mipstx39/jmr3904: spstkalloc04.exe
Result: invalid   
Time: 0:00:00.288623 spstkalloc04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spstkalloc04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spstkalloc04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1b234 lma 0
=>  Loading section .init, size 0x40 lma 1b234
=>  Loading section .fini, size 0x20 lma 1b274
=>  Loading section .rodata, size 0x24fb lma 1b298
=>  Loading section .eh_frame_hdr, size 0xe7c lma 1d794
=>  Loading section .eh_frame, size 0x4f9c lma 1e610
=>  Loading section .tdata, size 0xc lma 235ac
=>  Loading section .ctors, size 0x8 lma 235b8
=>  Loading section .dtors, size 0x8 lma 235c0
=>  Loading section .got2, size 0x2c lma 235c8
=>  Loading section .rtemsroset, size 0x6c lma 235f4
=>  Loading section .data, size 0x4ec lma 23660
=>  Loading section .sdata, size 0x91 lma 23b4c
=>  Start address 4
=>  Transfer rate: 1171136 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spstkalloc04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1757/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1748 W:0    | mipstx39/jmr3904: spsysinit01.exe
Result: invalid   
Time: 0:00:00.253227 spsysinit01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsysinit01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsysinit01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c90c lma 0
=>  Loading section .init, size 0x40 lma 1c90c
=>  Loading section .fini, size 0x20 lma 1c94c
=>  Loading section .rodata, size 0x3fa7 lma 1c970
=>  Loading section .eh_frame_hdr, size 0x15d4 lma 20918
=>  Loading section .eh_frame, size 0x6d90 lma 21eec
=>  Loading section .ctors, size 0x8 lma 28c7c
=>  Loading section .dtors, size 0x8 lma 28c84
=>  Loading section .got2, size 0x2c lma 28c8c
=>  Loading section .rtemsroset, size 0x308 lma 28cb8
=>  Loading section .data, size 0x70c lma 28fc0
=>  Loading section .sdata, size 0xb5 lma 296cc
=>  Start address 4
=>  Transfer rate: 1358816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsysinit01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1758/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1748 W:0    | mipstx39/jmr3904: spsyslock01.exe
Result: invalid   
Time: 0:00:00.252800 spsyslock01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spsyslock01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spsyslock01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x17c00 lma 0
=>  Loading section .init, size 0x40 lma 17c00
=>  Loading section .fini, size 0x20 lma 17c40
=>  Loading section .rodata, size 0x242c lma 17c60
=>  Loading section .eh_frame_hdr, size 0xe3c lma 1a08c
=>  Loading section .eh_frame, size 0x49a8 lma 1aec8
=>  Loading section .ctors, size 0x8 lma 1f870
=>  Loading section .dtors, size 0x8 lma 1f878
=>  Loading section .got2, size 0x2c lma 1f880
=>  Loading section .rtemsroset, size 0x70 lma 1f8ac
=>  Loading section .data, size 0x368 lma 1f920
=>  Loading section .sdata, size 0xa9 lma 1fc88
=>  Start address 4
=>  Transfer rate: 1042792 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsyslock01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1759/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1748 W:0    | mipstx39/jmr3904: sptask_err01.exe
Result: invalid   
Time: 0:00:00.256217 sptask_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptask_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptask_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14448 lma 0
=>  Loading section .init, size 0x40 lma 14448
=>  Loading section .fini, size 0x20 lma 14488
=>  Loading section .rodata, size 0x24dc lma 144a8
=>  Loading section .eh_frame_hdr, size 0xcdc lma 16984
=>  Loading section .eh_frame, size 0x4258 lma 17660
=>  Loading section .ctors, size 0x8 lma 1b8b8
=>  Loading section .dtors, size 0x8 lma 1b8c0
=>  Loading section .got2, size 0x2c lma 1b8c8
=>  Loading section .rtemsroset, size 0x70 lma 1b8f4
=>  Loading section .data, size 0x364 lma 1b968
=>  Loading section .sdata, size 0xa5 lma 1bcd0
=>  Start address 4
=>  Transfer rate: 912232 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptask_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1760/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1756 W:0    | mipstx39/jmr3904: sptask_err02.exe
Result: invalid   
Time: 0:00:00.254620 sptask_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptask_err02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptask_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ee4 lma 0
=>  Loading section .init, size 0x40 lma 14ee4
=>  Loading section .fini, size 0x20 lma 14f24
=>  Loading section .rodata, size 0x26f0 lma 14f48
=>  Loading section .eh_frame_hdr, size 0xcdc lma 17638
=>  Loading section .eh_frame, size 0x42f4 lma 18314
=>  Loading section .ctors, size 0x8 lma 1c608
=>  Loading section .dtors, size 0x8 lma 1c610
=>  Loading section .got2, size 0x2c lma 1c618
=>  Loading section .rtemsroset, size 0x70 lma 1c644
=>  Loading section .data, size 0x390 lma 1c6b8
=>  Loading section .sdata, size 0xb5 lma 1ca48
=>  Start address 4
=>  Transfer rate: 939944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptask_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1761/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1756 W:0    | mipstx39/jmr3904: sptask_err03.exe
Result: invalid   
Time: 0:00:00.257530 sptask_err03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptask_err03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptask_err03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c74 lma 0
=>  Loading section .init, size 0x40 lma 14c74
=>  Loading section .fini, size 0x20 lma 14cb4
=>  Loading section .rodata, size 0x28c8 lma 14cd8
=>  Loading section .eh_frame_hdr, size 0xc9c lma 175a0
=>  Loading section .eh_frame, size 0x4178 lma 1823c
=>  Loading section .ctors, size 0x8 lma 1c3b4
=>  Loading section .dtors, size 0x8 lma 1c3bc
=>  Loading section .got2, size 0x2c lma 1c3c4
=>  Loading section .rtemsroset, size 0x70 lma 1c3f0
=>  Loading section .data, size 0x364 lma 1c460
=>  Loading section .sdata, size 0xa5 lma 1c7c8
=>  Start address 4
=>  Transfer rate: 934696 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptask_err03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1762/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1756 W:0    | mipstx39/jmr3904: sptask_err04.exe
Result: invalid   
Time: 0:00:00.275935 sptask_err04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptask_err04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptask_err04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15d84 lma 0
=>  Loading section .init, size 0x40 lma 15d84
=>  Loading section .fini, size 0x20 lma 15dc4
=>  Loading section .rodata, size 0x2a4c lma 15de8
=>  Loading section .eh_frame_hdr, size 0xd34 lma 18834
=>  Loading section .eh_frame, size 0x44f8 lma 19568
=>  Loading section .ctors, size 0x8 lma 1da60
=>  Loading section .dtors, size 0x8 lma 1da68
=>  Loading section .got2, size 0x2c lma 1da70
=>  Loading section .rtemsroset, size 0x70 lma 1da9c
=>  Loading section .data, size 0x364 lma 1db10
=>  Loading section .sdata, size 0xa9 lma 1de78
=>  Start address 4
=>  Transfer rate: 981160 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptask_err04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1763/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1756 W:0    | mipstx39/jmr3904: sptasknopreempt01.exe
Result: invalid   
Time: 0:00:00.260151 sptasknopreempt01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptasknopreempt01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptasknopreempt01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14508 lma 0
=>  Loading section .init, size 0x40 lma 14508
=>  Loading section .fini, size 0x20 lma 14548
=>  Loading section .rodata, size 0x1fa8 lma 14568
=>  Loading section .eh_frame_hdr, size 0xcdc lma 16510
=>  Loading section .eh_frame, size 0x42e0 lma 171ec
=>  Loading section .ctors, size 0x8 lma 1b4cc
=>  Loading section .dtors, size 0x8 lma 1b4d4
=>  Loading section .got2, size 0x2c lma 1b4dc
=>  Loading section .rtemsroset, size 0x74 lma 1b508
=>  Loading section .data, size 0x394 lma 1b580
=>  Loading section .sdata, size 0xa9 lma 1b918
=>  Start address 4
=>  Transfer rate: 904648 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptasknopreempt01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1764/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1756 W:0    | mipstx39/jmr3904: spthread01.exe
Result: invalid   
Time: 0:00:00.256496 spthread01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spthread01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spthread01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15404 lma 0
=>  Loading section .init, size 0x40 lma 15404
=>  Loading section .fini, size 0x20 lma 15444
=>  Loading section .rodata, size 0x2024 lma 15468
=>  Loading section .eh_frame_hdr, size 0xd9c lma 1748c
=>  Loading section .eh_frame, size 0x4608 lma 18228
=>  Loading section .ctors, size 0x8 lma 1c830
=>  Loading section .dtors, size 0x8 lma 1c838
=>  Loading section .got2, size 0x2c lma 1c840
=>  Loading section .rtemsroset, size 0x70 lma 1c86c
=>  Loading section .data, size 0x368 lma 1c8e0
=>  Loading section .sdata, size 0xa9 lma 1cc48
=>  Start address 4
=>  Transfer rate: 943944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spthread01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1765/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1757 W:0    | mipstx39/jmr3904: spthreadlife01.exe
Result: invalid   
Time: 0:00:00.260027 spthreadlife01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spthreadlife01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spthreadlife01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16e28 lma 0
=>  Loading section .init, size 0x40 lma 16e28
=>  Loading section .fini, size 0x20 lma 16e68
=>  Loading section .rodata, size 0x22d4 lma 16e88
=>  Loading section .eh_frame_hdr, size 0xe54 lma 1915c
=>  Loading section .eh_frame, size 0x4bac lma 19fb0
=>  Loading section .ctors, size 0x8 lma 1eb5c
=>  Loading section .dtors, size 0x8 lma 1eb64
=>  Loading section .got2, size 0x2c lma 1eb6c
=>  Loading section .rtemsroset, size 0x74 lma 1eb98
=>  Loading section .data, size 0x3c4 lma 1ec10
=>  Loading section .sdata, size 0xad lma 1efd8
=>  Start address 4
=>  Transfer rate: 1016808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spthreadlife01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1766/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1757 W:0    | mipstx39/jmr3904: spthreadq01.exe
Result: invalid   
Time: 0:00:00.253656 spthreadq01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spthreadq01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spthreadq01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15fec lma 0
=>  Loading section .init, size 0x40 lma 15fec
=>  Loading section .fini, size 0x20 lma 1602c
=>  Loading section .rodata, size 0x20c4 lma 16050
=>  Loading section .eh_frame_hdr, size 0xdcc lma 18114
=>  Loading section .eh_frame, size 0x49e8 lma 18ee0
=>  Loading section .ctors, size 0x8 lma 1d8c8
=>  Loading section .dtors, size 0x8 lma 1d8d0
=>  Loading section .got2, size 0x2c lma 1d8d8
=>  Loading section .rtemsroset, size 0x7c lma 1d904
=>  Loading section .data, size 0x408 lma 1d980
=>  Loading section .sdata, size 0x95 lma 1dd88
=>  Start address 4
=>  Transfer rate: 979144 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spthreadq01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1767/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1757 W:0    | mipstx39/jmr3904: sptimecounter01.exe
Result: invalid   
Time: 0:00:00.252692 sptimecounter01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptimecounter01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptimecounter01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x6bb8 lma 0
=>  Loading section .init, size 0x40 lma 6bb8
=>  Loading section .fini, size 0x20 lma 6bf8
=>  Loading section .rodata, size 0x16bb lma 6c18
=>  Loading section .eh_frame_hdr, size 0x2ec lma 82d4
=>  Loading section .eh_frame, size 0xebc lma 85c0
=>  Loading section .ctors, size 0x8 lma 947c
=>  Loading section .dtors, size 0x8 lma 9484
=>  Loading section .got2, size 0x2c lma 948c
=>  Loading section .rtemsroset, size 0x48 lma 94b8
=>  Loading section .data, size 0x104 lma 9500
=>  Loading section .sdata, size 0x5d lma 9608
=>  Start address 4
=>  Transfer rate: 307968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimecounter01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1768/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1764 W:0    | mipstx39/jmr3904: sptimecounter02.exe
Result: invalid   
Time: 0:00:00.255797 sptimecounter02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptimecounter02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptimecounter02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15880 lma 0
=>  Loading section .init, size 0x40 lma 15880
=>  Loading section .fini, size 0x20 lma 158c0
=>  Loading section .rodata, size 0x2110 lma 158e0
=>  Loading section .eh_frame_hdr, size 0xddc lma 179f0
=>  Loading section .eh_frame, size 0x4864 lma 187cc
=>  Loading section .ctors, size 0x8 lma 1d030
=>  Loading section .dtors, size 0x8 lma 1d038
=>  Loading section .got2, size 0x2c lma 1d040
=>  Loading section .rtemsroset, size 0x78 lma 1d06c
=>  Loading section .data, size 0x398 lma 1d0e8
=>  Loading section .sdata, size 0xa9 lma 1d480
=>  Start address 4
=>  Transfer rate: 960808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimecounter02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1769/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1764 W:0    | mipstx39/jmr3904: sptimecounter03.exe
Result: invalid   
Time: 0:00:00.266507 sptimecounter03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptimecounter03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptimecounter03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14c0c lma 0
=>  Loading section .init, size 0x40 lma 14c0c
=>  Loading section .fini, size 0x20 lma 14c4c
=>  Loading section .rodata, size 0x1fe8 lma 14c70
=>  Loading section .eh_frame_hdr, size 0xd4c lma 16c58
=>  Loading section .eh_frame, size 0x4564 lma 179a4
=>  Loading section .ctors, size 0x8 lma 1bf08
=>  Loading section .dtors, size 0x8 lma 1bf10
=>  Loading section .got2, size 0x2c lma 1bf18
=>  Loading section .rtemsroset, size 0x74 lma 1bf44
=>  Loading section .data, size 0x398 lma 1bfb8
=>  Loading section .sdata, size 0xa9 lma 1c350
=>  Start address 4
=>  Transfer rate: 925608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimecounter03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1770/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1764 W:0    | mipstx39/jmr3904: sptimecounter04.exe
Result: invalid   
Time: 0:00:00.257453 sptimecounter04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptimecounter04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptimecounter04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14248 lma 0
=>  Loading section .init, size 0x40 lma 14248
=>  Loading section .fini, size 0x20 lma 14288
=>  Loading section .rodata, size 0x2064 lma 142a8
=>  Loading section .eh_frame_hdr, size 0xc94 lma 1630c
=>  Loading section .eh_frame, size 0x4168 lma 16fa0
=>  Loading section .ctors, size 0x8 lma 1b108
=>  Loading section .dtors, size 0x8 lma 1b110
=>  Loading section .got2, size 0x2c lma 1b118
=>  Loading section .rtemsroset, size 0x70 lma 1b144
=>  Loading section .data, size 0x368 lma 1b1b8
=>  Loading section .sdata, size 0xa9 lma 1b520
=>  Start address 4
=>  Transfer rate: 896552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimecounter04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1771/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1764 W:0    | mipstx39/jmr3904: sptimer_err01.exe
Result: invalid   
Time: 0:00:00.256536 sptimer_err01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptimer_err01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptimer_err01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16188 lma 0
=>  Loading section .init, size 0x40 lma 16188
=>  Loading section .fini, size 0x20 lma 161c8
=>  Loading section .rodata, size 0x2b24 lma 161e8
=>  Loading section .eh_frame_hdr, size 0xd6c lma 18d0c
=>  Loading section .eh_frame, size 0x472c lma 19a78
=>  Loading section .ctors, size 0x8 lma 1e1a4
=>  Loading section .dtors, size 0x8 lma 1e1ac
=>  Loading section .got2, size 0x2c lma 1e1b4
=>  Loading section .rtemsroset, size 0x74 lma 1e1e0
=>  Loading section .data, size 0x3c0 lma 1e258
=>  Loading section .sdata, size 0xb9 lma 1e618
=>  Start address 4
=>  Transfer rate: 996968 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimer_err01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1772/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1764 W:0    | mipstx39/jmr3904: sptimer_err02.exe
Result: invalid   
Time: 0:00:00.265786 sptimer_err02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptimer_err02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptimer_err02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15de8 lma 0
=>  Loading section .init, size 0x40 lma 15de8
=>  Loading section .fini, size 0x20 lma 15e28
=>  Loading section .rodata, size 0x2940 lma 15e48
=>  Loading section .eh_frame_hdr, size 0xd54 lma 18788
=>  Loading section .eh_frame, size 0x46cc lma 194dc
=>  Loading section .ctors, size 0x8 lma 1dba8
=>  Loading section .dtors, size 0x8 lma 1dbb0
=>  Loading section .got2, size 0x2c lma 1dbb8
=>  Loading section .rtemsroset, size 0x74 lma 1dbe4
=>  Loading section .data, size 0x3c0 lma 1dc58
=>  Loading section .sdata, size 0xb9 lma 1e018
=>  Start address 4
=>  Transfer rate: 984712 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimer_err02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1773/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1764 W:0    | mipstx39/jmr3904: sptimerserver01.exe
Result: invalid   
Time: 0:00:00.253500 sptimerserver01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptimerserver01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptimerserver01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14e28 lma 0
=>  Loading section .init, size 0x40 lma 14e28
=>  Loading section .fini, size 0x20 lma 14e68
=>  Loading section .rodata, size 0x2064 lma 14e88
=>  Loading section .eh_frame_hdr, size 0xd3c lma 16eec
=>  Loading section .eh_frame, size 0x4528 lma 17c28
=>  Loading section .ctors, size 0x8 lma 1c150
=>  Loading section .dtors, size 0x8 lma 1c158
=>  Loading section .got2, size 0x2c lma 1c160
=>  Loading section .rtemsroset, size 0x74 lma 1c18c
=>  Loading section .data, size 0x3c0 lma 1c200
=>  Loading section .sdata, size 0xb9 lma 1c5c0
=>  Start address 4
=>  Transfer rate: 930760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimerserver01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1774/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1764 W:0    | mipstx39/jmr3904: sptimespec01.exe
Result: invalid   
Time: 0:00:00.257027 sptimespec01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptimespec01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptimespec01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14a68 lma 0
=>  Loading section .init, size 0x40 lma 14a68
=>  Loading section .fini, size 0x20 lma 14aa8
=>  Loading section .rodata, size 0x2340 lma 14ac8
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 16e08
=>  Loading section .eh_frame, size 0x42d8 lma 17afc
=>  Loading section .ctors, size 0x8 lma 1bdd4
=>  Loading section .dtors, size 0x8 lma 1bddc
=>  Loading section .got2, size 0x2c lma 1bde4
=>  Loading section .rtemsroset, size 0x70 lma 1be10
=>  Loading section .data, size 0x378 lma 1be80
=>  Loading section .sdata, size 0xb1 lma 1c1f8
=>  Start address 4
=>  Transfer rate: 922952 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptimespec01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1775/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1764 W:0    | mipstx39/jmr3904: sptls01.exe
Result: invalid   
Time: 0:00:00.255906 sptls01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptls01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptls01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14638 lma 0
=>  Loading section .init, size 0x40 lma 14638
=>  Loading section .fini, size 0x20 lma 14678
=>  Loading section .rodata, size 0x1ff3 lma 14698
=>  Loading section .eh_frame_hdr, size 0xce4 lma 1668c
=>  Loading section .eh_frame, size 0x430c lma 17370
=>  Loading section .tdata, size 0x1 lma 1b67c
=>  Loading section .ctors, size 0x8 lma 1b680
=>  Loading section .dtors, size 0x8 lma 1b688
=>  Loading section .got2, size 0x2c lma 1b690
=>  Loading section .rtemsroset, size 0x74 lma 1b6bc
=>  Loading section .data, size 0x368 lma 1b730
=>  Loading section .sdata, size 0xb9 lma 1ba98
=>  Start address 4
=>  Transfer rate: 907880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptls01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1776/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1772 W:0    | mipstx39/jmr3904: sptls02.exe
Result: invalid   
Time: 0:00:00.265157 sptls02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptls02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptls02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x31500 lma 0
=>  Loading section .init, size 0x40 lma 31500
=>  Loading section .fini, size 0x20 lma 31540
=>  Loading section .rodata, size 0x477c lma 31560
=>  Loading section .eh_frame_hdr, size 0x15ec lma 35cdc
=>  Loading section .eh_frame, size 0x8d80 lma 372c8
=>  Loading section .gcc_except_table, size 0xb4 lma 40048
=>  Loading section .tdata, size 0x114 lma 40200
=>  Loading section .ctors, size 0xc lma 40400
=>  Loading section .dtors, size 0x8 lma 4040c
=>  Loading section .got2, size 0x2c lma 40414
=>  Loading section .rtemsroset, size 0x78 lma 40440
=>  Loading section .data, size 0x578 lma 404b8
=>  Loading section .sdata, size 0xec lma 40a30
=>  Start address 4
=>  Transfer rate: 2115936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptls02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00000004 in std::set_unexpected (func=0x0 <std::set_unexpected(void (*)())>) at ../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc:108
=>  108	../../../../../gnu-mirror-gcc-c9bb2be/libstdc++-v3/libsupc++/eh_terminate.cc: No such file or directory.
[1777/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1772 W:0    | mipstx39/jmr3904: sptls03.exe
Result: invalid   
Time: 0:00:00.255457 sptls03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptls03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptls03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xcf00 lma 0
=>  Loading section .init, size 0x40 lma cf00
=>  Loading section .fini, size 0x20 lma cf40
=>  Loading section .rodata, size 0x1b0c lma cf60
=>  Loading section .eh_frame_hdr, size 0x674 lma ea6c
=>  Loading section .eh_frame, size 0x226c lma f0e0
=>  Loading section .ctors, size 0x8 lma 1134c
=>  Loading section .dtors, size 0x8 lma 11354
=>  Loading section .got2, size 0x2c lma 1135c
=>  Loading section .rtemsroset, size 0x60 lma 11388
=>  Loading section .data, size 0x23c lma 113e8
=>  Loading section .sdata, size 0x94 lma 11628
=>  Start address 4
=>  Transfer rate: 570816 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptls03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1778/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1772 W:0    | mipstx39/jmr3904: sptls04.exe
Result: invalid   
Time: 0:00:00.264179 sptls04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/sptls04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/sptls04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12d74 lma 0
=>  Loading section .init, size 0x40 lma 12d74
=>  Loading section .fini, size 0x20 lma 12db4
=>  Loading section .rodata, size 0x1ec0 lma 12dd8
=>  Loading section .eh_frame_hdr, size 0xbe4 lma 14c98
=>  Loading section .eh_frame, size 0x3df0 lma 1587c
=>  Loading section .tdata, size 0x4 lma 1966c
=>  Loading section .ctors, size 0xc lma 19670
=>  Loading section .dtors, size 0x8 lma 1967c
=>  Loading section .got2, size 0x2c lma 19684
=>  Loading section .rtemsroset, size 0x6c lma 196b0
=>  Loading section .data, size 0x34c lma 19720
=>  Loading section .sdata, size 0x99 lma 19a6c
=>  Start address 4
=>  Transfer rate: 841704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sptls04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1779/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1772 W:0    | mipstx39/jmr3904: spunlimited01.exe
Result: invalid   
Time: 0:00:00.261963 spunlimited01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spunlimited01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spunlimited01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x190fc lma 0
=>  Loading section .init, size 0x40 lma 190fc
=>  Loading section .fini, size 0x20 lma 1913c
=>  Loading section .rodata, size 0x282c lma 19160
=>  Loading section .eh_frame_hdr, size 0xf64 lma 1b98c
=>  Loading section .eh_frame, size 0x52bc lma 1c8f0
=>  Loading section .ctors, size 0x8 lma 21bac
=>  Loading section .dtors, size 0x8 lma 21bb4
=>  Loading section .got2, size 0x2c lma 21bbc
=>  Loading section .rtemsroset, size 0x7c lma 21be8
=>  Loading section .data, size 0x3b8 lma 21c68
=>  Loading section .sdata, size 0x98 lma 22020
=>  Start address 4
=>  Transfer rate: 1115520 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spunlimited01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1780/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1772 W:0    | mipstx39/jmr3904: spversion01.exe
Result: invalid   
Time: 0:00:00.255348 spversion01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spversion01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spversion01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12dec lma 0
=>  Loading section .init, size 0x40 lma 12dec
=>  Loading section .fini, size 0x20 lma 12e2c
=>  Loading section .rodata, size 0x1f4c lma 12e50
=>  Loading section .eh_frame_hdr, size 0xc0c lma 14d9c
=>  Loading section .eh_frame, size 0x3e60 lma 159a8
=>  Loading section .ctors, size 0x8 lma 19808
=>  Loading section .dtors, size 0x8 lma 19810
=>  Loading section .got2, size 0x2c lma 19818
=>  Loading section .rtemsroset, size 0x6c lma 19844
=>  Loading section .data, size 0x34c lma 198b0
=>  Loading section .sdata, size 0x91 lma 19bfc
=>  Start address 4
=>  Transfer rate: 844872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spversion01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1781/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1772 W:0    | mipstx39/jmr3904: spwatchdog.exe
Result: invalid   
Time: 0:00:00.253179 spwatchdog.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spwatchdog.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spwatchdog.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16edc lma 0
=>  Loading section .init, size 0x40 lma 16edc
=>  Loading section .fini, size 0x20 lma 16f1c
=>  Loading section .rodata, size 0x2b09 lma 16f40
=>  Loading section .eh_frame_hdr, size 0xd9c lma 19a4c
=>  Loading section .eh_frame, size 0x46f8 lma 1a7e8
=>  Loading section .ctors, size 0x8 lma 1eee0
=>  Loading section .dtors, size 0x8 lma 1eee8
=>  Loading section .got2, size 0x2c lma 1eef0
=>  Loading section .rtemsroset, size 0x74 lma 1ef1c
=>  Loading section .data, size 0x3e0 lma 1ef90
=>  Loading section .sdata, size 0xb9 lma 1f370
=>  Start address 4
=>  Transfer rate: 1024272 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spwatchdog.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1782/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1772 W:0    | mipstx39/jmr3904: spwkspace.exe
Result: invalid   
Time: 0:00:00.260248 spwkspace.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/sptests/spwkspace.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/sptests/spwkspace.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13698 lma 0
=>  Loading section .init, size 0x40 lma 13698
=>  Loading section .fini, size 0x20 lma 136d8
=>  Loading section .rodata, size 0x2154 lma 136f8
=>  Loading section .eh_frame_hdr, size 0xc34 lma 1584c
=>  Loading section .eh_frame, size 0x4000 lma 16480
=>  Loading section .ctors, size 0x8 lma 1a480
=>  Loading section .dtors, size 0x8 lma 1a488
=>  Loading section .got2, size 0x2c lma 1a490
=>  Loading section .rtemsroset, size 0x6c lma 1a4bc
=>  Loading section .data, size 0x34c lma 1a528
=>  Loading section .sdata, size 0x91 lma 1a874
=>  Start address 4
=>  Transfer rate: 870440 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spwkspace.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1783/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1772 W:0    | mipstx39/jmr3904: tm01.exe
Result: invalid   
Time: 0:00:00.260121 tm01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147a0 lma 0
=>  Loading section .init, size 0x40 lma 147a0
=>  Loading section .fini, size 0x20 lma 147e0
=>  Loading section .rodata, size 0x2494 lma 14800
=>  Loading section .eh_frame_hdr, size 0xcfc lma 16c94
=>  Loading section .eh_frame, size 0x43b4 lma 17990
=>  Loading section .ctors, size 0x8 lma 1bd44
=>  Loading section .dtors, size 0x8 lma 1bd4c
=>  Loading section .got2, size 0x2c lma 1bd54
=>  Loading section .rtemsroset, size 0x70 lma 1bd80
=>  Loading section .data, size 0x378 lma 1bdf0
=>  Loading section .sdata, size 0x95 lma 1c168
=>  Start address 4
=>  Transfer rate: 921576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1784/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1780 W:0    | mipstx39/jmr3904: tm02.exe
Result: invalid   
Time: 0:00:00.257248 tm02.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm02.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm02.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144e0 lma 0
=>  Loading section .init, size 0x40 lma 144e0
=>  Loading section .fini, size 0x20 lma 14520
=>  Loading section .rodata, size 0x24b4 lma 14540
=>  Loading section .eh_frame_hdr, size 0xccc lma 169f4
=>  Loading section .eh_frame, size 0x43b8 lma 176c0
=>  Loading section .ctors, size 0x8 lma 1ba78
=>  Loading section .dtors, size 0x8 lma 1ba80
=>  Loading section .got2, size 0x2c lma 1ba88
=>  Loading section .rtemsroset, size 0x70 lma 1bab4
=>  Loading section .data, size 0x378 lma 1bb28
=>  Loading section .sdata, size 0x99 lma 1bea0
=>  Start address 4
=>  Transfer rate: 915880 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm02.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1785/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1780 W:0    | mipstx39/jmr3904: tm03.exe
Result: invalid   
Time: 0:00:00.257752 tm03.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm03.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm03.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147c0 lma 0
=>  Loading section .init, size 0x40 lma 147c0
=>  Loading section .fini, size 0x20 lma 14800
=>  Loading section .rodata, size 0x247c lma 14820
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 16c9c
=>  Loading section .eh_frame, size 0x43a0 lma 17990
=>  Loading section .ctors, size 0x8 lma 1bd30
=>  Loading section .dtors, size 0x8 lma 1bd38
=>  Loading section .got2, size 0x2c lma 1bd40
=>  Loading section .rtemsroset, size 0x70 lma 1bd6c
=>  Loading section .data, size 0x378 lma 1bde0
=>  Loading section .sdata, size 0x99 lma 1c158
=>  Start address 4
=>  Transfer rate: 921448 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm03.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1786/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1780 W:0    | mipstx39/jmr3904: tm04.exe
Result: invalid   
Time: 0:00:00.269332 tm04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm04.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16040 lma 0
=>  Loading section .init, size 0x40 lma 16040
=>  Loading section .fini, size 0x20 lma 16080
=>  Loading section .rodata, size 0x26f4 lma 160a0
=>  Loading section .eh_frame_hdr, size 0xd64 lma 18794
=>  Loading section .eh_frame, size 0x46a4 lma 194f8
=>  Loading section .ctors, size 0x8 lma 1db9c
=>  Loading section .dtors, size 0x8 lma 1dba4
=>  Loading section .got2, size 0x2c lma 1dbac
=>  Loading section .rtemsroset, size 0x70 lma 1dbd8
=>  Loading section .data, size 0x378 lma 1dc48
=>  Loading section .sdata, size 0x95 lma 1dfc0
=>  Start address 4
=>  Transfer rate: 983720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm04.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1787/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1780 W:0    | mipstx39/jmr3904: tm05.exe
Result: invalid   
Time: 0:00:00.276492 tm05.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm05.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm05.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x133e0 lma 0
=>  Loading section .init, size 0x40 lma 133e0
=>  Loading section .fini, size 0x20 lma 13420
=>  Loading section .rodata, size 0x23ec lma 13440
=>  Loading section .eh_frame_hdr, size 0xc54 lma 1582c
=>  Loading section .eh_frame, size 0x3fb8 lma 16480
=>  Loading section .ctors, size 0x8 lma 1a438
=>  Loading section .dtors, size 0x8 lma 1a440
=>  Loading section .got2, size 0x2c lma 1a448
=>  Loading section .rtemsroset, size 0x6c lma 1a474
=>  Loading section .data, size 0x348 lma 1a4e0
=>  Loading section .sdata, size 0x95 lma 1a828
=>  Start address 4
=>  Transfer rate: 869864 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm05.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1788/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1780 W:0    | mipstx39/jmr3904: tm06.exe
Result: invalid   
Time: 0:00:00.280600 tm06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm06.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13da0 lma 0
=>  Loading section .init, size 0x40 lma 13da0
=>  Loading section .fini, size 0x20 lma 13de0
=>  Loading section .rodata, size 0x245c lma 13e00
=>  Loading section .eh_frame_hdr, size 0xc9c lma 1625c
=>  Loading section .eh_frame, size 0x4148 lma 16ef8
=>  Loading section .ctors, size 0x8 lma 1b040
=>  Loading section .dtors, size 0x8 lma 1b048
=>  Loading section .got2, size 0x2c lma 1b050
=>  Loading section .rtemsroset, size 0x6c lma 1b07c
=>  Loading section .data, size 0x348 lma 1b0e8
=>  Loading section .sdata, size 0x91 lma 1b430
=>  Start address 4
=>  Transfer rate: 894472 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm06.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1789/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1780 W:0    | mipstx39/jmr3904: tm07.exe
Result: invalid   
Time: 0:00:00.265221 tm07.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm07.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm07.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13720 lma 0
=>  Loading section .init, size 0x40 lma 13720
=>  Loading section .fini, size 0x20 lma 13760
=>  Loading section .rodata, size 0x23cc lma 13780
=>  Loading section .eh_frame_hdr, size 0xc6c lma 15b4c
=>  Loading section .eh_frame, size 0x407c lma 167b8
=>  Loading section .ctors, size 0x8 lma 1a834
=>  Loading section .dtors, size 0x8 lma 1a83c
=>  Loading section .got2, size 0x2c lma 1a844
=>  Loading section .rtemsroset, size 0x6c lma 1a870
=>  Loading section .data, size 0x348 lma 1a8e0
=>  Loading section .sdata, size 0x95 lma 1ac28
=>  Start address 4
=>  Transfer rate: 878024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm07.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1790/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1780 W:0    | mipstx39/jmr3904: tm08.exe
Result: invalid   
Time: 0:00:00.257441 tm08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm08.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14aa0 lma 0
=>  Loading section .init, size 0x40 lma 14aa0
=>  Loading section .fini, size 0x20 lma 14ae0
=>  Loading section .rodata, size 0x25a8 lma 14b00
=>  Loading section .eh_frame_hdr, size 0xcbc lma 170a8
=>  Loading section .eh_frame, size 0x427c lma 17d64
=>  Loading section .ctors, size 0x8 lma 1bfe0
=>  Loading section .dtors, size 0x8 lma 1bfe8
=>  Loading section .got2, size 0x2c lma 1bff0
=>  Loading section .rtemsroset, size 0x6c lma 1c01c
=>  Loading section .data, size 0x374 lma 1c088
=>  Loading section .sdata, size 0xb5 lma 1c400
=>  Start address 4
=>  Transfer rate: 927112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm08.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1791/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1780 W:0    | mipstx39/jmr3904: tm09.exe
Result: invalid   
Time: 0:00:00.257617 tm09.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm09.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm09.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x146e0 lma 0
=>  Loading section .init, size 0x40 lma 146e0
=>  Loading section .fini, size 0x20 lma 14720
=>  Loading section .rodata, size 0x250c lma 14740
=>  Loading section .eh_frame_hdr, size 0xd24 lma 16c4c
=>  Loading section .eh_frame, size 0x449c lma 17970
=>  Loading section .ctors, size 0x8 lma 1be0c
=>  Loading section .dtors, size 0x8 lma 1be14
=>  Loading section .got2, size 0x2c lma 1be1c
=>  Loading section .rtemsroset, size 0x70 lma 1be48
=>  Loading section .data, size 0x378 lma 1beb8
=>  Loading section .sdata, size 0x95 lma 1c230
=>  Start address 4
=>  Transfer rate: 923176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm09.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1792/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1786 W:0    | mipstx39/jmr3904: tm10.exe
Result: invalid   
Time: 0:00:00.280567 tm10.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm10.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm10.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x140a0 lma 0
=>  Loading section .init, size 0x40 lma 140a0
=>  Loading section .fini, size 0x20 lma 140e0
=>  Loading section .rodata, size 0x2454 lma 14100
=>  Loading section .eh_frame_hdr, size 0xcec lma 16554
=>  Loading section .eh_frame, size 0x433c lma 17240
=>  Loading section .ctors, size 0x8 lma 1b57c
=>  Loading section .dtors, size 0x8 lma 1b584
=>  Loading section .got2, size 0x2c lma 1b58c
=>  Loading section .rtemsroset, size 0x70 lma 1b5b8
=>  Loading section .data, size 0x378 lma 1b628
=>  Loading section .sdata, size 0x99 lma 1b9a0
=>  Start address 4
=>  Transfer rate: 905672 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm10.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1793/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1788 W:0    | mipstx39/jmr3904: tm11.exe
Result: invalid   
Time: 0:00:00.277304 tm11.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm11.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm11.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14420 lma 0
=>  Loading section .init, size 0x40 lma 14420
=>  Loading section .fini, size 0x20 lma 14460
=>  Loading section .rodata, size 0x2444 lma 14480
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 168c4
=>  Loading section .eh_frame, size 0x43dc lma 175b8
=>  Loading section .ctors, size 0x8 lma 1b994
=>  Loading section .dtors, size 0x8 lma 1b99c
=>  Loading section .got2, size 0x2c lma 1b9a4
=>  Loading section .rtemsroset, size 0x70 lma 1b9d0
=>  Loading section .data, size 0x378 lma 1ba40
=>  Loading section .sdata, size 0x99 lma 1bdb8
=>  Start address 4
=>  Transfer rate: 914056 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm11.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1794/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1788 W:0    | mipstx39/jmr3904: tm12.exe
Result: invalid   
Time: 0:00:00.270251 tm12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm12.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm12.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14460 lma 0
=>  Loading section .init, size 0x40 lma 14460
=>  Loading section .fini, size 0x20 lma 144a0
=>  Loading section .rodata, size 0x244c lma 144c0
=>  Loading section .eh_frame_hdr, size 0xcfc lma 1690c
=>  Loading section .eh_frame, size 0x43ec lma 17608
=>  Loading section .ctors, size 0x8 lma 1b9f4
=>  Loading section .dtors, size 0x8 lma 1b9fc
=>  Loading section .got2, size 0x2c lma 1ba04
=>  Loading section .rtemsroset, size 0x70 lma 1ba30
=>  Loading section .data, size 0x378 lma 1baa0
=>  Loading section .sdata, size 0x99 lma 1be18
=>  Start address 4
=>  Transfer rate: 914824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm12.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1795/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1788 W:0    | mipstx39/jmr3904: tm13.exe
Result: invalid   
Time: 0:00:00.265473 tm13.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm13.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm13.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14420 lma 0
=>  Loading section .init, size 0x40 lma 14420
=>  Loading section .fini, size 0x20 lma 14460
=>  Loading section .rodata, size 0x244c lma 14480
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 168cc
=>  Loading section .eh_frame, size 0x43dc lma 175c0
=>  Loading section .ctors, size 0x8 lma 1b99c
=>  Loading section .dtors, size 0x8 lma 1b9a4
=>  Loading section .got2, size 0x2c lma 1b9ac
=>  Loading section .rtemsroset, size 0x70 lma 1b9d8
=>  Loading section .data, size 0x378 lma 1ba48
=>  Loading section .sdata, size 0x99 lma 1bdc0
=>  Start address 4
=>  Transfer rate: 914120 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm13.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1796/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1788 W:0    | mipstx39/jmr3904: tm14.exe
Result: invalid   
Time: 0:00:00.259767 tm14.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm14.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm14.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14460 lma 0
=>  Loading section .init, size 0x40 lma 14460
=>  Loading section .fini, size 0x20 lma 144a0
=>  Loading section .rodata, size 0x244c lma 144c0
=>  Loading section .eh_frame_hdr, size 0xcfc lma 1690c
=>  Loading section .eh_frame, size 0x43ec lma 17608
=>  Loading section .ctors, size 0x8 lma 1b9f4
=>  Loading section .dtors, size 0x8 lma 1b9fc
=>  Loading section .got2, size 0x2c lma 1ba04
=>  Loading section .rtemsroset, size 0x70 lma 1ba30
=>  Loading section .data, size 0x378 lma 1baa0
=>  Loading section .sdata, size 0x99 lma 1be18
=>  Start address 4
=>  Transfer rate: 914824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm14.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1797/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1788 W:0    | mipstx39/jmr3904: tm15.exe
Result: invalid   
Time: 0:00:00.266091 tm15.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm15.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm15.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x138e0 lma 0
=>  Loading section .init, size 0x40 lma 138e0
=>  Loading section .fini, size 0x20 lma 13920
=>  Loading section .rodata, size 0x24d4 lma 13940
=>  Loading section .eh_frame_hdr, size 0xc54 lma 15e14
=>  Loading section .eh_frame, size 0x3fe0 lma 16a68
=>  Loading section .ctors, size 0x8 lma 1aa48
=>  Loading section .dtors, size 0x8 lma 1aa50
=>  Loading section .got2, size 0x2c lma 1aa58
=>  Loading section .rtemsroset, size 0x6c lma 1aa84
=>  Loading section .data, size 0x348 lma 1aaf0
=>  Loading section .sdata, size 0x91 lma 1ae38
=>  Start address 4
=>  Transfer rate: 882248 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm15.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1798/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1788 W:0    | mipstx39/jmr3904: tm16.exe
Result: invalid   
Time: 0:00:00.284419 tm16.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm16.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm16.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13720 lma 0
=>  Loading section .init, size 0x40 lma 13720
=>  Loading section .fini, size 0x20 lma 13760
=>  Loading section .rodata, size 0x2414 lma 13780
=>  Loading section .eh_frame_hdr, size 0xc54 lma 15b94
=>  Loading section .eh_frame, size 0x400c lma 167e8
=>  Loading section .ctors, size 0x8 lma 1a7f4
=>  Loading section .dtors, size 0x8 lma 1a7fc
=>  Loading section .got2, size 0x2c lma 1a804
=>  Loading section .rtemsroset, size 0x6c lma 1a830
=>  Loading section .data, size 0x348 lma 1a8a0
=>  Loading section .sdata, size 0x95 lma 1abe8
=>  Start address 4
=>  Transfer rate: 877512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm16.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1799/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1788 W:0    | mipstx39/jmr3904: tm17.exe
Result: invalid   
Time: 0:00:00.278554 tm17.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm17.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm17.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x134e0 lma 0
=>  Loading section .init, size 0x40 lma 134e0
=>  Loading section .fini, size 0x20 lma 13520
=>  Loading section .rodata, size 0x23cc lma 13540
=>  Loading section .eh_frame_hdr, size 0xc54 lma 1590c
=>  Loading section .eh_frame, size 0x3fe4 lma 16560
=>  Loading section .ctors, size 0x8 lma 1a544
=>  Loading section .dtors, size 0x8 lma 1a54c
=>  Loading section .got2, size 0x2c lma 1a554
=>  Loading section .rtemsroset, size 0x6c lma 1a580
=>  Loading section .data, size 0x348 lma 1a5f0
=>  Loading section .sdata, size 0x95 lma 1a938
=>  Start address 4
=>  Transfer rate: 872008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm17.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1800/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1796 W:0    | mipstx39/jmr3904: tm18.exe
Result: invalid   
Time: 0:00:00.346799 tm18.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm18.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm18.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x131c0 lma 0
=>  Loading section .init, size 0x40 lma 131c0
=>  Loading section .fini, size 0x20 lma 13200
=>  Loading section .rodata, size 0x23c4 lma 13220
=>  Loading section .eh_frame_hdr, size 0xc44 lma 155e4
=>  Loading section .eh_frame, size 0x3f30 lma 16228
=>  Loading section .ctors, size 0x8 lma 1a158
=>  Loading section .dtors, size 0x8 lma 1a160
=>  Loading section .got2, size 0x2c lma 1a168
=>  Loading section .rtemsroset, size 0x6c lma 1a194
=>  Loading section .data, size 0x348 lma 1a200
=>  Loading section .sdata, size 0x91 lma 1a548
=>  Start address 4
=>  Transfer rate: 863944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm18.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1801/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1796 W:0    | mipstx39/jmr3904: tm19.exe
Result: invalid   
Time: 0:00:00.369886 tm19.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm19.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm19.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13d60 lma 0
=>  Loading section .init, size 0x40 lma 13d60
=>  Loading section .fini, size 0x20 lma 13da0
=>  Loading section .rodata, size 0x2524 lma 13dc0
=>  Loading section .eh_frame_hdr, size 0xc7c lma 162e4
=>  Loading section .eh_frame, size 0x40d4 lma 16f60
=>  Loading section .ctors, size 0x8 lma 1b034
=>  Loading section .dtors, size 0x8 lma 1b03c
=>  Loading section .got2, size 0x2c lma 1b044
=>  Loading section .rtemsroset, size 0x6c lma 1b070
=>  Loading section .data, size 0x348 lma 1b0e0
=>  Loading section .sdata, size 0x91 lma 1b428
=>  Start address 4
=>  Transfer rate: 894376 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm19.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1802/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1796 W:0    | mipstx39/jmr3904: tm20.exe
Result: invalid   
Time: 0:00:00.268316 tm20.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm20.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm20.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15660 lma 0
=>  Loading section .init, size 0x40 lma 15660
=>  Loading section .fini, size 0x20 lma 156a0
=>  Loading section .rodata, size 0x27c8 lma 156c0
=>  Loading section .eh_frame_hdr, size 0xd74 lma 17e88
=>  Loading section .eh_frame, size 0x4620 lma 18bfc
=>  Loading section .ctors, size 0x8 lma 1d21c
=>  Loading section .dtors, size 0x8 lma 1d224
=>  Loading section .got2, size 0x2c lma 1d22c
=>  Loading section .rtemsroset, size 0x78 lma 1d258
=>  Loading section .data, size 0x3c0 lma 1d2d0
=>  Loading section .sdata, size 0x99 lma 1d690
=>  Start address 4
=>  Transfer rate: 964936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm20.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1803/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1796 W:0    | mipstx39/jmr3904: tm21.exe
Result: invalid   
Time: 0:00:00.294666 tm21.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm21.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm21.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15280 lma 0
=>  Loading section .init, size 0x40 lma 15280
=>  Loading section .fini, size 0x20 lma 152c0
=>  Loading section .rodata, size 0x259c lma 152e0
=>  Loading section .eh_frame_hdr, size 0xd84 lma 1787c
=>  Loading section .eh_frame, size 0x46a0 lma 18600
=>  Loading section .ctors, size 0x8 lma 1cca0
=>  Loading section .dtors, size 0x8 lma 1cca8
=>  Loading section .got2, size 0x2c lma 1ccb0
=>  Loading section .rtemsroset, size 0x88 lma 1ccdc
=>  Loading section .data, size 0x498 lma 1cd68
=>  Loading section .sdata, size 0x95 lma 1d200
=>  Start address 4
=>  Transfer rate: 955528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm21.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1804/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1796 W:0    | mipstx39/jmr3904: tm22.exe
Result: invalid   
Time: 0:00:00.329903 tm22.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm22.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm22.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14720 lma 0
=>  Loading section .init, size 0x40 lma 14720
=>  Loading section .fini, size 0x20 lma 14760
=>  Loading section .rodata, size 0x2514 lma 14780
=>  Loading section .eh_frame_hdr, size 0xcec lma 16c94
=>  Loading section .eh_frame, size 0x43d8 lma 17980
=>  Loading section .ctors, size 0x8 lma 1bd58
=>  Loading section .dtors, size 0x8 lma 1bd60
=>  Loading section .got2, size 0x2c lma 1bd68
=>  Loading section .rtemsroset, size 0x70 lma 1bd94
=>  Loading section .data, size 0x378 lma 1be08
=>  Loading section .sdata, size 0x95 lma 1c180
=>  Start address 4
=>  Transfer rate: 921736 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm22.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1805/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1796 W:0    | mipstx39/jmr3904: tm23.exe
Result: invalid   
Time: 0:00:00.586335 tm23.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm23.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm23.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15000 lma 0
=>  Loading section .init, size 0x40 lma 15000
=>  Loading section .fini, size 0x20 lma 15040
=>  Loading section .rodata, size 0x2608 lma 15060
=>  Loading section .eh_frame_hdr, size 0xd0c lma 17668
=>  Loading section .eh_frame, size 0x43dc lma 18374
=>  Loading section .ctors, size 0x8 lma 1c750
=>  Loading section .dtors, size 0x8 lma 1c758
=>  Loading section .got2, size 0x2c lma 1c760
=>  Loading section .rtemsroset, size 0x70 lma 1c78c
=>  Loading section .data, size 0x3a4 lma 1c800
=>  Loading section .sdata, size 0xb5 lma 1cba8
=>  Start address 4
=>  Transfer rate: 942760 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm23.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1806/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1796 W:0    | mipstx39/jmr3904: tm24.exe
Result: invalid   
Time: 0:00:00.257143 tm24.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm24.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm24.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x133e0 lma 0
=>  Loading section .init, size 0x40 lma 133e0
=>  Loading section .fini, size 0x20 lma 13420
=>  Loading section .rodata, size 0x241c lma 13440
=>  Loading section .eh_frame_hdr, size 0xc3c lma 1585c
=>  Loading section .eh_frame, size 0x3f64 lma 16498
=>  Loading section .ctors, size 0x8 lma 1a3fc
=>  Loading section .dtors, size 0x8 lma 1a404
=>  Loading section .got2, size 0x2c lma 1a40c
=>  Loading section .rtemsroset, size 0x6c lma 1a438
=>  Loading section .data, size 0x348 lma 1a4a8
=>  Loading section .sdata, size 0x91 lma 1a7f0
=>  Start address 4
=>  Transfer rate: 869352 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm24.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1807/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1796 W:0    | mipstx39/jmr3904: tm25.exe
Result: invalid   
Time: 0:00:00.267944 tm25.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm25.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm25.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14560 lma 0
=>  Loading section .init, size 0x40 lma 14560
=>  Loading section .fini, size 0x20 lma 145a0
=>  Loading section .rodata, size 0x2434 lma 145c0
=>  Loading section .eh_frame_hdr, size 0xcfc lma 169f4
=>  Loading section .eh_frame, size 0x4368 lma 176f0
=>  Loading section .ctors, size 0x8 lma 1ba58
=>  Loading section .dtors, size 0x8 lma 1ba60
=>  Loading section .got2, size 0x2c lma 1ba68
=>  Loading section .rtemsroset, size 0x70 lma 1ba94
=>  Loading section .data, size 0x378 lma 1bb08
=>  Loading section .sdata, size 0xa5 lma 1be80
=>  Start address 4
=>  Transfer rate: 915720 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm25.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1808/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1802 W:0    | mipstx39/jmr3904: tm26.exe
Result: invalid   
Time: 0:00:00.265099 tm26.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm26.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm26.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1cb90 lma 0
=>  Loading section .init, size 0x40 lma 1cb90
=>  Loading section .fini, size 0x20 lma 1cbd0
=>  Loading section .rodata, size 0x2da9 lma 1cbf0
=>  Loading section .eh_frame_hdr, size 0xf2c lma 1f99c
=>  Loading section .eh_frame, size 0x5464 lma 208c8
=>  Loading section .tdata, size 0xc lma 25d2c
=>  Loading section .ctors, size 0x8 lma 25d38
=>  Loading section .dtors, size 0x8 lma 25d40
=>  Loading section .got2, size 0x2c lma 25d48
=>  Loading section .rtemsroset, size 0x70 lma 25d74
=>  Loading section .data, size 0x518 lma 25de8
=>  Loading section .sdata, size 0x95 lma 26300
=>  Start address 4
=>  Transfer rate: 1252464 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm26.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1809/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1802 W:0    | mipstx39/jmr3904: tm27.exe
Result: invalid   
Time: 0:00:00.522359 tm27.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm27.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm27.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1474c lma 0
=>  Loading section .init, size 0x40 lma 1474c
=>  Loading section .fini, size 0x20 lma 1478c
=>  Loading section .rodata, size 0x25ef lma 147b0
=>  Loading section .eh_frame_hdr, size 0xd0c lma 16da0
=>  Loading section .eh_frame, size 0x4418 lma 17aac
=>  Loading section .tdata, size 0xc lma 1bec4
=>  Loading section .ctors, size 0x8 lma 1bed0
=>  Loading section .dtors, size 0x8 lma 1bed8
=>  Loading section .got2, size 0x2c lma 1bee0
=>  Loading section .rtemsroset, size 0x6c lma 1bf0c
=>  Loading section .data, size 0x374 lma 1bf78
=>  Loading section .sdata, size 0x91 lma 1c2ec
=>  Start address 4
=>  Transfer rate: 924608 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm27.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1810/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1802 W:0    | mipstx39/jmr3904: tm28.exe
Result: invalid   
Time: 0:00:00.288471 tm28.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm28.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm28.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x135c0 lma 0
=>  Loading section .init, size 0x40 lma 135c0
=>  Loading section .fini, size 0x20 lma 13600
=>  Loading section .rodata, size 0x2434 lma 13620
=>  Loading section .eh_frame_hdr, size 0xc64 lma 15a54
=>  Loading section .eh_frame, size 0x4064 lma 166b8
=>  Loading section .ctors, size 0x8 lma 1a71c
=>  Loading section .dtors, size 0x8 lma 1a724
=>  Loading section .got2, size 0x2c lma 1a72c
=>  Loading section .rtemsroset, size 0x70 lma 1a758
=>  Loading section .data, size 0x378 lma 1a7c8
=>  Loading section .sdata, size 0x91 lma 1ab40
=>  Start address 4
=>  Transfer rate: 876168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm28.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1811/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1803 W:0    | mipstx39/jmr3904: tm29.exe
Result: invalid   
Time: 0:00:00.281556 tm29.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm29.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm29.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14260 lma 0
=>  Loading section .init, size 0x40 lma 14260
=>  Loading section .fini, size 0x20 lma 142a0
=>  Loading section .rodata, size 0x254c lma 142c0
=>  Loading section .eh_frame_hdr, size 0xc9c lma 1680c
=>  Loading section .eh_frame, size 0x4208 lma 174a8
=>  Loading section .ctors, size 0x8 lma 1b6b0
=>  Loading section .dtors, size 0x8 lma 1b6b8
=>  Loading section .got2, size 0x2c lma 1b6c0
=>  Loading section .rtemsroset, size 0x70 lma 1b6ec
=>  Loading section .data, size 0x378 lma 1b760
=>  Loading section .sdata, size 0x91 lma 1bad8
=>  Start address 4
=>  Transfer rate: 908072 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm29.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1812/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1803 W:0    | mipstx39/jmr3904: tm30.exe
Result: invalid   
Time: 0:00:00.305244 tm30.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm30.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm30.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13860 lma 0
=>  Loading section .init, size 0x40 lma 13860
=>  Loading section .fini, size 0x20 lma 138a0
=>  Loading section .rodata, size 0x2428 lma 138c0
=>  Loading section .eh_frame_hdr, size 0xcac lma 15ce8
=>  Loading section .eh_frame, size 0x415c lma 16994
=>  Loading section .ctors, size 0x8 lma 1aaf0
=>  Loading section .dtors, size 0x8 lma 1aaf8
=>  Loading section .got2, size 0x2c lma 1ab00
=>  Loading section .rtemsroset, size 0x70 lma 1ab2c
=>  Loading section .data, size 0x378 lma 1aba0
=>  Loading section .sdata, size 0x95 lma 1af18
=>  Start address 4
=>  Transfer rate: 884040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm30.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1813/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1804 W:0    | mipstx39/jmr3904: tm31.exe
Result: invalid   
Time: 0:00:00.269310 tm31.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm31.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm31.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144e0 lma 0
=>  Loading section .init, size 0x40 lma 144e0
=>  Loading section .fini, size 0x20 lma 14520
=>  Loading section .rodata, size 0x24c4 lma 14540
=>  Loading section .eh_frame_hdr, size 0xccc lma 16a04
=>  Loading section .eh_frame, size 0x43b8 lma 176d0
=>  Loading section .ctors, size 0x8 lma 1ba88
=>  Loading section .dtors, size 0x8 lma 1ba90
=>  Loading section .got2, size 0x2c lma 1ba98
=>  Loading section .rtemsroset, size 0x70 lma 1bac4
=>  Loading section .data, size 0x378 lma 1bb38
=>  Loading section .sdata, size 0x99 lma 1beb0
=>  Start address 4
=>  Transfer rate: 916008 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm31.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1814/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1804 W:0    | mipstx39/jmr3904: tm32.exe
Result: invalid   
Time: 0:00:00.308236 tm32.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm32.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm32.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147c0 lma 0
=>  Loading section .init, size 0x40 lma 147c0
=>  Loading section .fini, size 0x20 lma 14800
=>  Loading section .rodata, size 0x248c lma 14820
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 16cac
=>  Loading section .eh_frame, size 0x43a0 lma 179a0
=>  Loading section .ctors, size 0x8 lma 1bd40
=>  Loading section .dtors, size 0x8 lma 1bd48
=>  Loading section .got2, size 0x2c lma 1bd50
=>  Loading section .rtemsroset, size 0x70 lma 1bd7c
=>  Loading section .data, size 0x378 lma 1bdf0
=>  Loading section .sdata, size 0x99 lma 1c168
=>  Start address 4
=>  Transfer rate: 921576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm32.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1815/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1804 W:0    | mipstx39/jmr3904: tm33.exe
Result: invalid   
Time: 0:00:00.254436 tm33.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm33.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm33.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144e0 lma 0
=>  Loading section .init, size 0x40 lma 144e0
=>  Loading section .fini, size 0x20 lma 14520
=>  Loading section .rodata, size 0x24bc lma 14540
=>  Loading section .eh_frame_hdr, size 0xccc lma 169fc
=>  Loading section .eh_frame, size 0x43b8 lma 176c8
=>  Loading section .ctors, size 0x8 lma 1ba80
=>  Loading section .dtors, size 0x8 lma 1ba88
=>  Loading section .got2, size 0x2c lma 1ba90
=>  Loading section .rtemsroset, size 0x70 lma 1babc
=>  Loading section .data, size 0x378 lma 1bb30
=>  Loading section .sdata, size 0x99 lma 1bea8
=>  Start address 4
=>  Transfer rate: 915944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm33.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1816/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1809 W:0    | mipstx39/jmr3904: tm34.exe
Result: invalid   
Time: 0:00:00.295906 tm34.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm34.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm34.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147c0 lma 0
=>  Loading section .init, size 0x40 lma 147c0
=>  Loading section .fini, size 0x20 lma 14800
=>  Loading section .rodata, size 0x2484 lma 14820
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 16ca4
=>  Loading section .eh_frame, size 0x43a0 lma 17998
=>  Loading section .ctors, size 0x8 lma 1bd38
=>  Loading section .dtors, size 0x8 lma 1bd40
=>  Loading section .got2, size 0x2c lma 1bd48
=>  Loading section .rtemsroset, size 0x70 lma 1bd74
=>  Loading section .data, size 0x378 lma 1bde8
=>  Loading section .sdata, size 0x99 lma 1c160
=>  Start address 4
=>  Transfer rate: 921512 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm34.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1817/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1810 W:0    | mipstx39/jmr3904: tm35.exe
Result: invalid   
Time: 0:00:00.268597 tm35.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm35.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm35.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x144e0 lma 0
=>  Loading section .init, size 0x40 lma 144e0
=>  Loading section .fini, size 0x20 lma 14520
=>  Loading section .rodata, size 0x24bc lma 14540
=>  Loading section .eh_frame_hdr, size 0xccc lma 169fc
=>  Loading section .eh_frame, size 0x43b8 lma 176c8
=>  Loading section .ctors, size 0x8 lma 1ba80
=>  Loading section .dtors, size 0x8 lma 1ba88
=>  Loading section .got2, size 0x2c lma 1ba90
=>  Loading section .rtemsroset, size 0x70 lma 1babc
=>  Loading section .data, size 0x378 lma 1bb30
=>  Loading section .sdata, size 0x99 lma 1bea8
=>  Start address 4
=>  Transfer rate: 915944 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm35.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1818/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1810 W:0    | mipstx39/jmr3904: tm36.exe
Result: invalid   
Time: 0:00:00.268686 tm36.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tm36.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tm36.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x147c0 lma 0
=>  Loading section .init, size 0x40 lma 147c0
=>  Loading section .fini, size 0x20 lma 14800
=>  Loading section .rodata, size 0x248c lma 14820
=>  Loading section .eh_frame_hdr, size 0xcf4 lma 16cac
=>  Loading section .eh_frame, size 0x43a0 lma 179a0
=>  Loading section .ctors, size 0x8 lma 1bd40
=>  Loading section .dtors, size 0x8 lma 1bd48
=>  Loading section .got2, size 0x2c lma 1bd50
=>  Loading section .rtemsroset, size 0x70 lma 1bd7c
=>  Loading section .data, size 0x378 lma 1bdf0
=>  Loading section .sdata, size 0x99 lma 1c168
=>  Start address 4
=>  Transfer rate: 921576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm36.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1819/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1811 W:0    | mipstx39/jmr3904: tmck.exe
Result: invalid   
Time: 0:00:00.267479 tmck.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tmck.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tmck.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13420 lma 0
=>  Loading section .init, size 0x40 lma 13420
=>  Loading section .fini, size 0x20 lma 13460
=>  Loading section .rodata, size 0x2500 lma 13480
=>  Loading section .eh_frame_hdr, size 0xc4c lma 15980
=>  Loading section .eh_frame, size 0x3f4c lma 165cc
=>  Loading section .ctors, size 0x8 lma 1a518
=>  Loading section .dtors, size 0x8 lma 1a520
=>  Loading section .got2, size 0x2c lma 1a528
=>  Loading section .rtemsroset, size 0x6c lma 1a554
=>  Loading section .data, size 0x348 lma 1a5c0
=>  Loading section .sdata, size 0x91 lma 1a908
=>  Start address 4
=>  Transfer rate: 871624 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmck.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1820/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1811 W:0    | mipstx39/jmr3904: tmcontext01.exe
Result: invalid   
Time: 0:00:00.279105 tmcontext01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tmcontext01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tmcontext01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x142dc lma 0
=>  Loading section .init, size 0x40 lma 142dc
=>  Loading section .fini, size 0x20 lma 1431c
=>  Loading section .rodata, size 0x1ff0 lma 14340
=>  Loading section .eh_frame_hdr, size 0xc44 lma 16330
=>  Loading section .eh_frame, size 0x4008 lma 16f74
=>  Loading section .ctors, size 0x8 lma 1af7c
=>  Loading section .dtors, size 0x8 lma 1af84
=>  Loading section .got2, size 0x2c lma 1af8c
=>  Loading section .rtemsroset, size 0x70 lma 1afb8
=>  Loading section .data, size 0x348 lma 1b028
=>  Loading section .sdata, size 0x91 lma 1b370
=>  Start address 4
=>  Transfer rate: 892904 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmcontext01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1821/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1811 W:0    | mipstx39/jmr3904: tmfine01.exe
Result: invalid   
Time: 0:00:00.259263 tmfine01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tmfine01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tmfine01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x18f84 lma 0
=>  Loading section .init, size 0x40 lma 18f84
=>  Loading section .fini, size 0x20 lma 18fc4
=>  Loading section .rodata, size 0x2258 lma 18fe8
=>  Loading section .eh_frame_hdr, size 0xfac lma 1b240
=>  Loading section .eh_frame, size 0x5524 lma 1c1ec
=>  Loading section .ctors, size 0x8 lma 21710
=>  Loading section .dtors, size 0x8 lma 21718
=>  Loading section .got2, size 0x2c lma 21720
=>  Loading section .rtemsroset, size 0x7c lma 2174c
=>  Loading section .data, size 0x3f4 lma 217c8
=>  Loading section .sdata, size 0xad lma 21bc0
=>  Start address 4
=>  Transfer rate: 1106728 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmfine01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1822/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1811 W:0    | mipstx39/jmr3904: tmonetoone.exe
Result: invalid   
Time: 0:00:00.274181 tmonetoone.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x15ca8 lma 0
=>  Loading section .init, size 0x40 lma 15ca8
=>  Loading section .fini, size 0x20 lma 15ce8
=>  Loading section .rodata, size 0x2078 lma 15d08
=>  Loading section .eh_frame_hdr, size 0xda4 lma 17d80
=>  Loading section .eh_frame, size 0x47cc lma 18b24
=>  Loading section .ctors, size 0x8 lma 1d2f0
=>  Loading section .dtors, size 0x8 lma 1d2f8
=>  Loading section .got2, size 0x2c lma 1d300
=>  Loading section .rtemsroset, size 0x74 lma 1d32c
=>  Loading section .data, size 0x394 lma 1d3a0
=>  Loading section .sdata, size 0xad lma 1d738
=>  Start address 4
=>  Transfer rate: 966408 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1823/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1818 W:0    | mipstx39/jmr3904: tmtimer01.exe
Result: invalid   
Time: 0:00:00.506350 tmtimer01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14ac0 lma 0
=>  Loading section .init, size 0x40 lma 14ac0
=>  Loading section .fini, size 0x20 lma 14b00
=>  Loading section .rodata, size 0x20bc lma 14b20
=>  Loading section .eh_frame_hdr, size 0xd3c lma 16bdc
=>  Loading section .eh_frame, size 0x44e8 lma 17918
=>  Loading section .ctors, size 0x8 lma 1be00
=>  Loading section .dtors, size 0x8 lma 1be08
=>  Loading section .got2, size 0x2c lma 1be10
=>  Loading section .rtemsroset, size 0x78 lma 1be3c
=>  Loading section .data, size 0x394 lma 1beb8
=>  Loading section .sdata, size 0xac lma 1c250
=>  Start address 4
=>  Transfer rate: 923552 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1824/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1819 W:0    | mipstx39/jmr3904: ts-unit-no-clock-0.exe
Result: invalid   
Time: 0:00:00.257147 ts-unit-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/unit/ts-unit-no-clock-0.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/unit/ts-unit-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11820 lma 0
=>  Loading section .init, size 0x40 lma 11820
=>  Loading section .fini, size 0x20 lma 11860
=>  Loading section .rodata, size 0x4fcc lma 11880
=>  Loading section .eh_frame_hdr, size 0x90c lma 1684c
=>  Loading section .eh_frame, size 0x3188 lma 17158
=>  Loading section .ctors, size 0x8 lma 1a2e0
=>  Loading section .dtors, size 0x8 lma 1a2e8
=>  Loading section .got2, size 0x2c lma 1a2f0
=>  Loading section .rtemsroset, size 0x74 lma 1a31c
=>  Loading section .data, size 0x2ac lma 1a390
=>  Loading section .sdata, size 0x70 lma 1a63c
=>  Start address 4
=>  Transfer rate: 865632 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/unit/ts-unit-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1825/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1819 W:0    | mipstx39/jmr3904: ts-fatal-init-task-construct-failed.exe
Result: invalid   
Time: 0:00:00.260545 ts-fatal-init-task-construct-failed.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-fatal-init-task-construct-failed.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-fatal-init-task-construct-failed.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xf21c lma 0
=>  Loading section .init, size 0x40 lma f21c
=>  Loading section .fini, size 0x20 lma f25c
=>  Loading section .rodata, size 0x1f0c lma f280
=>  Loading section .eh_frame_hdr, size 0x7a4 lma 1118c
=>  Loading section .eh_frame, size 0x28e8 lma 11930
=>  Loading section .ctors, size 0x8 lma 14218
=>  Loading section .dtors, size 0x8 lma 14220
=>  Loading section .got2, size 0x2c lma 14228
=>  Loading section .rtemsroset, size 0x74 lma 14254
=>  Loading section .data, size 0x290 lma 142c8
=>  Loading section .sdata, size 0x70 lma 14558
=>  Start address 4
=>  Transfer rate: 667168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-fatal-init-task-construct-failed.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1826/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1819 W:0    | mipstx39/jmr3904: ts-fatal-too-large-tls-size.exe
Result: invalid   
Time: 0:00:00.258530 ts-fatal-too-large-tls-size.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-fatal-too-large-tls-size.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-fatal-too-large-tls-size.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xcac8 lma 0
=>  Loading section .init, size 0x40 lma cac8
=>  Loading section .fini, size 0x20 lma cb08
=>  Loading section .rodata, size 0x1ea0 lma cb28
=>  Loading section .eh_frame_hdr, size 0x5fc lma e9c8
=>  Loading section .eh_frame, size 0x2014 lma efc4
=>  Loading section .ctors, size 0x8 lma 10fd8
=>  Loading section .dtors, size 0x8 lma 10fe0
=>  Loading section .got2, size 0x2c lma 10fe8
=>  Loading section .rtemsroset, size 0x70 lma 11014
=>  Loading section .data, size 0x268 lma 11088
=>  Loading section .sdata, size 0x68 lma 112f0
=>  Start address 4
=>  Transfer rate: 563872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-fatal-too-large-tls-size.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1827/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1819 W:0    | mipstx39/jmr3904: ts-performance-no-clock-0.exe
Result: invalid   
Time: 0:00:00.257236 ts-performance-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-performance-no-clock-0.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-performance-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1912c lma 0
=>  Loading section .init, size 0x40 lma 1912c
=>  Loading section .fini, size 0x20 lma 1916c
=>  Loading section .rodata, size 0x2e3c lma 19190
=>  Loading section .eh_frame_hdr, size 0xf5c lma 1bfcc
=>  Loading section .eh_frame, size 0x5478 lma 1cf28
=>  Loading section .ctors, size 0x8 lma 223a0
=>  Loading section .dtors, size 0x8 lma 223a8
=>  Loading section .got2, size 0x2c lma 223b0
=>  Loading section .rtemsroset, size 0x94 lma 223dc
=>  Loading section .data, size 0x438 lma 22470
=>  Loading section .sdata, size 0x7c lma 228a8
=>  Start address 4
=>  Transfer rate: 1132800 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-performance-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1828/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1819 W:0    | mipstx39/jmr3904: ts-terminate.exe
Result: invalid   
Time: 0:00:00.268869 ts-terminate.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-terminate.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-terminate.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12544 lma 0
=>  Loading section .init, size 0x40 lma 12544
=>  Loading section .fini, size 0x20 lma 12584
=>  Loading section .rodata, size 0x25d0 lma 125a8
=>  Loading section .eh_frame_hdr, size 0x9a4 lma 14b78
=>  Loading section .eh_frame, size 0x33e8 lma 1551c
=>  Loading section .ctors, size 0x8 lma 18904
=>  Loading section .dtors, size 0x8 lma 1890c
=>  Loading section .got2, size 0x2c lma 18914
=>  Loading section .rtemsroset, size 0x6c lma 18940
=>  Loading section .data, size 0x284 lma 189b0
=>  Loading section .sdata, size 0x70 lma 18c38
=>  Start address 4
=>  Transfer rate: 812256 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-terminate.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1829/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1819 W:0    | mipstx39/jmr3904: ts-userext.exe
Result: invalid   
Time: 0:00:00.257510 ts-userext.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-userext.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x14330 lma 0
=>  Loading section .init, size 0x40 lma 14330
=>  Loading section .fini, size 0x20 lma 14370
=>  Loading section .rodata, size 0x27e8 lma 14390
=>  Loading section .eh_frame_hdr, size 0xc7c lma 16b78
=>  Loading section .eh_frame, size 0x3e64 lma 177f4
=>  Loading section .ctors, size 0x8 lma 1b658
=>  Loading section .dtors, size 0x8 lma 1b660
=>  Loading section .got2, size 0x2c lma 1b668
=>  Loading section .rtemsroset, size 0x74 lma 1b694
=>  Loading section .data, size 0x2cc lma 1b708
=>  Loading section .sdata, size 0x98 lma 1b9d8
=>  Start address 4
=>  Transfer rate: 906080 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1830/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1819 W:0    | mipstx39/jmr3904: ts-validation-0.exe
Result: invalid   
Time: 0:00:00.288850 ts-validation-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-0.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x16554 lma 0
=>  Loading section .init, size 0x40 lma 16554
=>  Loading section .fini, size 0x20 lma 16594
=>  Loading section .rodata, size 0x2b9c lma 165b8
=>  Loading section .eh_frame_hdr, size 0xc6c lma 19154
=>  Loading section .eh_frame, size 0x41d0 lma 19dc0
=>  Loading section .ctors, size 0x8 lma 1df90
=>  Loading section .dtors, size 0x8 lma 1df98
=>  Loading section .got2, size 0x2c lma 1dfa0
=>  Loading section .rtemsroset, size 0x80 lma 1dfcc
=>  Loading section .data, size 0x3fc lma 1e050
=>  Loading section .sdata, size 0x98 lma 1e450
=>  Start address 4
=>  Transfer rate: 992992 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1831/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1821 W:0    | mipstx39/jmr3904: ts-validation-1.exe
Result: invalid   
Time: 0:00:00.274087 ts-validation-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-1.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x13b94 lma 0
=>  Loading section .init, size 0x40 lma 13b94
=>  Loading section .fini, size 0x20 lma 13bd4
=>  Loading section .rodata, size 0xeaac lma 13bf8
=>  Loading section .eh_frame_hdr, size 0xad4 lma 226a4
=>  Loading section .eh_frame, size 0x3974 lma 23178
=>  Loading section .ctors, size 0x8 lma 26aec
=>  Loading section .dtors, size 0x8 lma 26af4
=>  Loading section .got2, size 0x2c lma 26afc
=>  Loading section .rtemsroset, size 0x74 lma 26b28
=>  Loading section .data, size 0x2cc lma 26ba0
=>  Loading section .sdata, size 0x90 lma 26e70
=>  Start address 4
=>  Transfer rate: 1275808 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1832/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1823 W:0    | mipstx39/jmr3904: ts-validation-acfg-0.exe
Result: invalid   
Time: 0:00:00.256923 ts-validation-acfg-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-0.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x107a0 lma 0
=>  Loading section .init, size 0x40 lma 107a0
=>  Loading section .fini, size 0x20 lma 107e0
=>  Loading section .rodata, size 0x22cc lma 10800
=>  Loading section .eh_frame_hdr, size 0x874 lma 12acc
=>  Loading section .eh_frame, size 0x2edc lma 13340
=>  Loading section .ctors, size 0x8 lma 1621c
=>  Loading section .dtors, size 0x8 lma 16224
=>  Loading section .got2, size 0x2c lma 1622c
=>  Loading section .rtemsroset, size 0x88 lma 16258
=>  Loading section .data, size 0x390 lma 162e0
=>  Loading section .sdata, size 0x78 lma 16670
=>  Start address 4
=>  Transfer rate: 735040 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1833/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1824 W:0    | mipstx39/jmr3904: ts-validation-acfg-1.exe
Result: invalid   
Time: 0:00:00.252036 ts-validation-acfg-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-1.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xef64 lma 0
=>  Loading section .init, size 0x40 lma ef64
=>  Loading section .fini, size 0x20 lma efa4
=>  Loading section .rodata, size 0x1ea8 lma efc8
=>  Loading section .eh_frame_hdr, size 0x74c lma 10e70
=>  Loading section .eh_frame, size 0x2794 lma 115bc
=>  Loading section .ctors, size 0x8 lma 13d50
=>  Loading section .dtors, size 0x8 lma 13d58
=>  Loading section .got2, size 0x2c lma 13d60
=>  Loading section .rtemsroset, size 0x64 lma 13d8c
=>  Loading section .data, size 0x230 lma 13df0
=>  Loading section .sdata, size 0x5c lma 14020
=>  Start address 4
=>  Transfer rate: 656320 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1834/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1824 W:0    | mipstx39/jmr3904: ts-validation-cache.exe
Result: invalid   
Time: 0:00:00.290776 ts-validation-cache.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-cache.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-cache.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12610 lma 0
=>  Loading section .init, size 0x40 lma 12610
=>  Loading section .fini, size 0x20 lma 12650
=>  Loading section .rodata, size 0x2450 lma 12670
=>  Loading section .eh_frame_hdr, size 0x9f4 lma 14ac0
=>  Loading section .eh_frame, size 0x34e0 lma 154b4
=>  Loading section .ctors, size 0x8 lma 18994
=>  Loading section .dtors, size 0x8 lma 1899c
=>  Loading section .got2, size 0x2c lma 189a4
=>  Loading section .rtemsroset, size 0x74 lma 189d0
=>  Loading section .data, size 0x2b8 lma 18a48
=>  Loading section .sdata, size 0x88 lma 18d00
=>  Start address 4
=>  Transfer rate: 814112 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-cache.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1835/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1830 W:0    | mipstx39/jmr3904: ts-validation-intr.exe
Result: invalid   
Time: 0:00:00.520751 ts-validation-intr.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-intr.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-intr.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x19160 lma 0
=>  Loading section .init, size 0x40 lma 19160
=>  Loading section .fini, size 0x20 lma 191a0
=>  Loading section .rodata, size 0x4b14 lma 191c0
=>  Loading section .eh_frame_hdr, size 0xc1c lma 1dcd4
=>  Loading section .eh_frame, size 0x4264 lma 1e8f0
=>  Loading section .ctors, size 0x8 lma 22b54
=>  Loading section .dtors, size 0x8 lma 22b5c
=>  Loading section .got2, size 0x2c lma 22b64
=>  Loading section .rtemsroset, size 0xa8 lma 22b90
=>  Loading section .data, size 0x4ac lma 22c38
=>  Loading section .sdata, size 0xe4 lma 230e4
=>  Start address 4
=>  Transfer rate: 1150528 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-intr.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1836/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1830 W:0    | mipstx39/jmr3904: ts-validation-io-kernel.exe
Result: invalid   
Time: 0:00:00.519335 ts-validation-io-kernel.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-io-kernel.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-io-kernel.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x8214 lma 0
=>  Loading section .init, size 0x40 lma 8214
=>  Loading section .fini, size 0x20 lma 8254
=>  Loading section .rodata, size 0x1790 lma 8278
=>  Loading section .eh_frame_hdr, size 0x3ec lma 9a08
=>  Loading section .eh_frame, size 0x1488 lma 9df4
=>  Loading section .ctors, size 0x8 lma b27c
=>  Loading section .dtors, size 0x8 lma b284
=>  Loading section .got2, size 0x2c lma b28c
=>  Loading section .rtemsroset, size 0x58 lma b2b8
=>  Loading section .data, size 0x70 lma b310
=>  Loading section .sdata, size 0x50 lma b380
=>  Start address 4
=>  Transfer rate: 368224 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-io-kernel.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1837/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1830 W:0    | mipstx39/jmr3904: ts-validation-no-clock-0.exe
Result: invalid   
Time: 0:00:00.506184 ts-validation-no-clock-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-no-clock-0.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-no-clock-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x4b62c lma 0
=>  Loading section .init, size 0x40 lma 4b62c
=>  Loading section .fini, size 0x20 lma 4b66c
=>  Loading section .rodata, size 0x1a460 lma 4b690
=>  Loading section .eh_frame_hdr, size 0x281c lma 65af0
=>  Loading section .eh_frame, size 0xc91c lma 6830c
=>  Loading section .ctors, size 0x8 lma 74c28
=>  Loading section .dtors, size 0x8 lma 74c30
=>  Loading section .got2, size 0x2c lma 74c38
=>  Loading section .rtemsroset, size 0x248 lma 74c64
=>  Loading section .data, size 0x13ec lma 74eb0
=>  Loading section .rtemsrwset, size 0x4 lma 7629c
=>  Loading section .sdata, size 0x398 lma 762a0
=>  Start address 4
=>  Transfer rate: 3879296 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-no-clock-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1838/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1831 W:0    | mipstx39/jmr3904: ts-validation-non-smp.exe
Result: invalid   
Time: 0:00:00.335774 ts-validation-non-smp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-non-smp.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-non-smp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11eb8 lma 0
=>  Loading section .init, size 0x40 lma 11eb8
=>  Loading section .fini, size 0x20 lma 11ef8
=>  Loading section .rodata, size 0x24c8 lma 11f18
=>  Loading section .eh_frame_hdr, size 0x94c lma 143e0
=>  Loading section .eh_frame, size 0x329c lma 14d2c
=>  Loading section .ctors, size 0x8 lma 17fc8
=>  Loading section .dtors, size 0x8 lma 17fd0
=>  Loading section .got2, size 0x2c lma 17fd8
=>  Loading section .rtemsroset, size 0x78 lma 18004
=>  Loading section .data, size 0x2c8 lma 18080
=>  Loading section .sdata, size 0x88 lma 18348
=>  Start address 4
=>  Transfer rate: 794208 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-non-smp.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1839/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1830 W:0    | mipstx39/jmr3904: ts-validation-one-cpu-0.exe
Result: invalid   
Time: 0:00:00.303707 ts-validation-one-cpu-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-one-cpu-0.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-one-cpu-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x1c790 lma 0
=>  Loading section .init, size 0x40 lma 1c790
=>  Loading section .fini, size 0x20 lma 1c7d0
=>  Loading section .rodata, size 0x6630 lma 1c7f0
=>  Loading section .eh_frame_hdr, size 0x1044 lma 22e20
=>  Loading section .eh_frame, size 0x54bc lma 23e64
=>  Loading section .ctors, size 0x8 lma 29320
=>  Loading section .dtors, size 0x8 lma 29328
=>  Loading section .got2, size 0x2c lma 29330
=>  Loading section .rtemsroset, size 0xb4 lma 2935c
=>  Loading section .data, size 0x4e8 lma 29410
=>  Loading section .sdata, size 0xc0 lma 298f8
=>  Start address 4
=>  Transfer rate: 1363392 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-one-cpu-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1840/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1831 W:0    | mipstx39/jmr3904: ts-validation-one-cpu-1.exe
Result: invalid   
Time: 0:00:00.546148 ts-validation-one-cpu-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-one-cpu-1.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-one-cpu-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x12d2c lma 0
=>  Loading section .init, size 0x40 lma 12d2c
=>  Loading section .fini, size 0x20 lma 12d6c
=>  Loading section .rodata, size 0xea94 lma 12d90
=>  Loading section .eh_frame_hdr, size 0xa54 lma 21824
=>  Loading section .eh_frame, size 0x36fc lma 22278
=>  Loading section .ctors, size 0x8 lma 25974
=>  Loading section .dtors, size 0x8 lma 2597c
=>  Loading section .got2, size 0x2c lma 25984
=>  Loading section .rtemsroset, size 0x74 lma 259b0
=>  Loading section .data, size 0x2c0 lma 25a28
=>  Loading section .sdata, size 0x78 lma 25ce8
=>  Start address 4
=>  Transfer rate: 1239744 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-one-cpu-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1841/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1831 W:0    | mipstx39/jmr3904: ts-validation-timecounter-0.exe
Result: invalid   
Time: 0:00:00.262938 ts-validation-timecounter-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-timecounter-0.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-timecounter-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x138dc lma 0
=>  Loading section .init, size 0x40 lma 138dc
=>  Loading section .fini, size 0x20 lma 1391c
=>  Loading section .rodata, size 0x2a2c lma 13940
=>  Loading section .eh_frame_hdr, size 0x9a4 lma 1636c
=>  Loading section .eh_frame, size 0x33fc lma 16d10
=>  Loading section .ctors, size 0x8 lma 1a10c
=>  Loading section .dtors, size 0x8 lma 1a114
=>  Loading section .got2, size 0x2c lma 1a11c
=>  Loading section .rtemsroset, size 0x70 lma 1a148
=>  Loading section .data, size 0x29c lma 1a1b8
=>  Loading section .sdata, size 0x80 lma 1a458
=>  Start address 4
=>  Transfer rate: 861824 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-timecounter-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1842/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1831 W:0    | mipstx39/jmr3904: ts-validation-timecounter-1.exe
Result: invalid   
Time: 0:00:00.306085 ts-validation-timecounter-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-timecounter-1.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-timecounter-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x146a8 lma 0
=>  Loading section .init, size 0x40 lma 146a8
=>  Loading section .fini, size 0x20 lma 146e8
=>  Loading section .rodata, size 0x2550 lma 14708
=>  Loading section .eh_frame_hdr, size 0xac4 lma 16c58
=>  Loading section .eh_frame, size 0x3a10 lma 1771c
=>  Loading section .ctors, size 0x8 lma 1b12c
=>  Loading section .dtors, size 0x8 lma 1b134
=>  Loading section .got2, size 0x2c lma 1b13c
=>  Loading section .rtemsroset, size 0x74 lma 1b168
=>  Loading section .data, size 0x364 lma 1b1e0
=>  Loading section .sdata, size 0x88 lma 1b548
=>  Start address 4
=>  Transfer rate: 896576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-timecounter-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1843/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1838 W:0    | mipstx39/jmr3904: ts-validation-tls-0.exe
Result: invalid   
Time: 0:00:00.255201 ts-validation-tls-0.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-tls-0.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-tls-0.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0x11d78 lma 0
=>  Loading section .init, size 0x40 lma 11d78
=>  Loading section .fini, size 0x20 lma 11db8
=>  Loading section .rodata, size 0x246c lma 11dd8
=>  Loading section .eh_frame_hdr, size 0x94c lma 14244
=>  Loading section .eh_frame, size 0x3290 lma 14b90
=>  Loading section .tdata, size 0x4 lma 17f00
=>  Loading section .ctors, size 0x8 lma 18000
=>  Loading section .dtors, size 0x8 lma 18008
=>  Loading section .got2, size 0x2c lma 18010
=>  Loading section .rtemsroset, size 0x74 lma 1803c
=>  Loading section .data, size 0x2b8 lma 180b0
=>  Loading section .sdata, size 0x88 lma 18368
=>  Start address 4
=>  Transfer rate: 790688 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-tls-0.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1844/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1839 W:0    | mipstx39/jmr3904: ts-validation-tls-1.exe
Result: invalid   
Time: 0:00:00.259675 ts-validation-tls-1.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/validation/ts-validation-tls-1.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/validation/ts-validation-tls-1.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .text, size 0xcb40 lma 0
=>  Loading section .init, size 0x40 lma cb40
=>  Loading section .fini, size 0x20 lma cb80
=>  Loading section .rodata, size 0x1ee4 lma cba0
=>  Loading section .eh_frame_hdr, size 0x5e4 lma ea84
=>  Loading section .eh_frame, size 0x1fe8 lma f068
=>  Loading section .tdata, size 0x4 lma 11100
=>  Loading section .ctors, size 0x8 lma 11200
=>  Loading section .dtors, size 0x8 lma 11208
=>  Loading section .got2, size 0x2c lma 11210
=>  Loading section .rtemsroset, size 0x74 lma 1123c
=>  Loading section .data, size 0x278 lma 112b0
=>  Loading section .sdata, size 0x68 lma 11528
=>  Start address 4
=>  Transfer rate: 565024 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-tls-1.exe 
=>  mips-core: 4 byte read to unmapped address 0x4 at 0x4
=>  Program
=>   received signal SIGBUS, Bus error.
=>  _start () at ../../../bsps/powerpc/psim/start/start.S:53
=>  53		bl	.Laddr			/* get current address */
[1845/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1839 W:0    | mipstx39/jmr3904: base_sp.exe
Result: invalid   
Time: 0:00:00.284940 base_sp.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/base_sp.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/base_sp.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x123a0 lma 3040
=>  Loading section .fini, size 0x20 lma 153e0
=>  Loading section .rodata, size 0x1abc lma 15400
=>  Loading section .sbss2, size 0x1 lma 16ebc
=>  Loading section .data, size 0x380 lma 16ec0
=>  Loading section .got2, size 0x1c lma 17240
=>  Loading section .ctors, size 0x8 lma 1725c
=>  Loading section .dtors, size 0x8 lma 17264
=>  Loading section .sdata, size 0x88 lma 17270
=>  Start address 3040
=>  Transfer rate: 661384 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/base_sp.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()
[1846/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1839 W:0    | mipstx39/jmr3904: capture.exe
Result: invalid   
Time: 0:00:00.258811 capture.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/capture.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/capture.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x32140 lma 3040
=>  Loading section .fini, size 0x20 lma 35180
=>  Loading section .rodata, size 0x4fa8 lma 351a0
=>  Loading section .tdata, size 0xc lma 3a148
=>  Loading section .sbss2, size 0x1 lma 3a154
=>  Loading section .data, size 0x8fc lma 3a158
=>  Loading section .got2, size 0x1c lma 3aa54
=>  Loading section .ctors, size 0x8 lma 3aa70
=>  Loading section .dtors, size 0x8 lma 3aa78
=>  Loading section .sdata, size 0x98 lma 3aa80
=>  Start address 3040
=>  Transfer rate: 1824936 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/capture.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()
[1847/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1839 W:0    | mipstx39/jmr3904: cdtest.exe
Result: invalid   
Time: 0:00:00.280036 cdtest.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/cdtest.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/cdtest.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x2f450 lma 3040
=>  Loading section .fini, size 0x20 lma 32490
=>  Loading section .rodata, size 0x4020 lma 324b0
=>  Loading section .tdata, size 0xc lma 364d0
=>  Loading section .sbss2, size 0x1 lma 364dc
=>  Loading section .data, size 0x51c lma 364e0
=>  Loading section .gcc_except_table, size 0x16e lma 369fc
=>  Loading section .got2, size 0x1c lma 36b6c
=>  Loading section .ctors, size 0x10 lma 36b88
=>  Loading section .dtors, size 0x8 lma 36b98
=>  Loading section .sdata, size 0x100 lma 36ba0
=>  Start address 3040
=>  Transfer rate: 1696984 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/cdtest.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()
[1848/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1839 W:0    | mipstx39/jmr3904: fileio.exe
Result: invalid   
Time: 0:00:00.299096 fileio.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/fileio.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/fileio.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x82f60 lma 3040
=>  Loading section .fini, size 0x20 lma 85fa0
=>  Loading section .rodata, size 0x12728 lma 85fc0
=>  Loading section .tdata, size 0x14 lma 986e8
=>  Loading section .sbss2, size 0x1 lma 986fc
=>  Loading section .data, size 0x1418 lma 98700
=>  Loading section .got2, size 0x1c lma 99b18
=>  Loading section .ctors, size 0x8 lma 99b34
=>  Loading section .dtors, size 0x8 lma 99b3c
=>  Loading section .sdata, size 0xf0 lma 99b48
=>  Start address 3040
=>  Transfer rate: 4940168 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/fileio.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()
[1849/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1839 W:0    | mipstx39/jmr3904: hello.exe
Result: invalid   
Time: 0:00:00.293560 hello.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/hello.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/hello.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x1af10 lma 3040
=>  Loading section .fini, size 0x20 lma 1df50
=>  Loading section .rodata, size 0x1ae0 lma 1df70
=>  Loading section .tdata, size 0xc lma 1fa50
=>  Loading section .sbss2, size 0x1 lma 1fa5c
=>  Loading section .data, size 0x51c lma 1fa60
=>  Loading section .got2, size 0x1c lma 1ff7c
=>  Loading section .ctors, size 0x8 lma 1ff98
=>  Loading section .dtors, size 0x8 lma 1ffa0
=>  Loading section .sdata, size 0x78 lma 1ffa8
=>  Start address 3040
=>  Transfer rate: 950504 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/hello.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()
[1850/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1839 W:0    | mipstx39/jmr3904: iostream.exe
Result: invalid   
Time: 0:00:00.262469 iostream.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/iostream.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/iostream.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x943f0 lma 3040
=>  Loading section .fini, size 0x20 lma 97430
=>  Loading section .rodata, size 0x9998 lma 97450
=>  Loading section .tdata, size 0xc lma a0de8
=>  Loading section .sbss2, size 0x1 lma a0df4
=>  Loading section .data, size 0x5f0 lma a0df8
=>  Loading section .gcc_except_table, size 0x1d25 lma a13e8
=>  Loading section .got2, size 0x1c lma a3110
=>  Loading section .ctors, size 0x28 lma a312c
=>  Loading section .dtors, size 0x8 lma a3154
=>  Loading section .sdata, size 0x140 lma a315c
=>  Start address 3040
=>  Transfer rate: 5248176 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/iostream.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()
[1851/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1846 W:0    | mipstx39/jmr3904: minimum.exe
[1852/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1847 W:0    | mipstx39/jmr3904: nsecs.exe
Result: invalid   
Time: 0:00:00.261201 nsecs.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/nsecs.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/nsecs.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x1a110 lma 3040
=>  Loading section .fini, size 0x20 lma 1d150
=>  Loading section .rodata, size 0x2234 lma 1d170
=>  Loading section .sbss2, size 0x1 lma 1f3a4
=>  Loading section .data, size 0x578 lma 1f3a8
=>  Loading section .got2, size 0x1c lma 1f920
=>  Loading section .ctors, size 0x8 lma 1f93c
=>  Loading section .dtors, size 0x8 lma 1f944
=>  Loading section .sdata, size 0xa4 lma 1f950
=>  Start address 3040
=>  Transfer rate: 937832 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/nsecs.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()
[1853/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1847 W:0    | mipstx39/jmr3904: paranoia.exe
Result: invalid   
Time: 0:00:00.259836 paranoia.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/paranoia.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/paranoia.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x29de0 lma 3040
=>  Loading section .fini, size 0x20 lma 2ce20
=>  Loading section .rodata, size 0x4b28 lma 2ce40
=>  Loading section .tdata, size 0xc lma 31968
=>  Loading section .sbss2, size 0x1 lma 31974
=>  Loading section .data, size 0x628 lma 31978
=>  Loading section .got2, size 0x1c lma 31fa0
=>  Loading section .ctors, size 0x8 lma 31fbc
=>  Loading section .dtors, size 0x8 lma 31fc4
=>  Loading section .sdata, size 0x100 lma 31fd0
=>  Start address 3040
=>  Transfer rate: 1541704 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/paranoia.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()
[1854/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1847 W:0    | mipstx39/jmr3904: ticker.exe
Result: invalid   
Time: 0:00:00.282268 ticker.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/ticker.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/ticker.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x13770 lma 3040
=>  Loading section .fini, size 0x20 lma 167b0
=>  Loading section .rodata, size 0x1c64 lma 167d0
=>  Loading section .sbss2, size 0x1 lma 18434
=>  Loading section .data, size 0x524 lma 18438
=>  Loading section .got2, size 0x1c lma 1895c
=>  Loading section .ctors, size 0x8 lma 18978
=>  Loading section .dtors, size 0x8 lma 18980
=>  Loading section .sdata, size 0x9c lma 18988
=>  Start address 3040
=>  Transfer rate: 708872 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/ticker.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()
[1855/1855] p:3    f:0    u:0    e:0    I:0    B:0    t:0    L:0    i:1847 W:0    | mipstx39/jmr3904: unlimited.exe
Result: invalid   
Time: 0:00:00.257653 unlimited.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/mipstx39-rtems6-gdb -i=mi --nx --quiet ./build/powerpc/virtex4/testsuites/samples/unlimited.exe
=>  Reading symbols from ./build/powerpc/virtex4/testsuites/samples/unlimited.exe...
=>  target sim --board=jmr3904
=>  Connected to the simulator.
=>  load
=>  Loading section .init, size 0x40 lma 3000
=>  Loading section .text, size 0x13020 lma 3040
=>  Loading section .fini, size 0x20 lma 16060
=>  Loading section .rodata, size 0x1620 lma 16080
=>  Loading section .tdata, size 0xc lma 176a0
=>  Loading section .sbss2, size 0x1 lma 176ac
=>  Loading section .data, size 0x388 lma 176b0
=>  Loading section .got2, size 0x1c lma 17a38
=>  Loading section .ctors, size 0x8 lma 17a54
=>  Loading section .dtors, size 0x8 lma 17a5c
=>  Loading section .sdata, size 0x78 lma 17a64
=>  Start address 3040
=>  Transfer rate: 677576 bits in <1 sec.
=>  run
=>  Starting program: /home/tester/rtems-cron-6/rtems/build/powerpc/virtex4/testsuites/samples/unlimited.exe 
=>  mips-core: 4 byte read to unmapped address 0x3040 at 0x3040
=>  Program
=>   received signal SIGBUS, Bus error.
=>  0x00003040 in download_entry ()

Passed:           4
Failed:           0
User Input:       0
Expected Fail:    0
Indeterminate:    0
Benchmark:        0
Timeout:          0
Test too long:    0
Invalid:       1851
Wrong Version:    0
Wrong Build:      0
Wrong Tools:      0
Wrong Header:     0
-------------------
Total:         1855
Invalid:
 block07.exe
 rbheap01.exe
 spfatal33.exe
 psxshm02.exe
 psxkey03.exe
 sp18.exe
 psxtmrwlock01.exe
 psxtmrwlock03.exe
 psxfilelock01.exe
 spclock_err01.exe
 sp29.exe
 psxsignal03.exe
 psx09.exe
 psxglobalcon02.exe
 tar01.exe
 psxeintr_join.exe
 psxclock01.exe
 spedfsched04.exe
 defaultconfig01.exe
 spedfsched01.exe
 spmisc01.exe
 dl07.exe
 psxaio02.exe
 md501.exe
 tm29.exe
 spclock_todhook01.exe
 spsyslock01.exe
 block13.exe
 spglobalcon02.exe
 psxreaddir.exe
 spfatal28.exe
 psxclockrealtime01.exe
 spfatal04.exe
 fsdosfsname02.exe
 spintrcritical04.exe
 mdosfs_fsstatvfs.exe
 mimfs_fslink.exe
 psxtmcond06.exe
 spstdc17.exe
 tar03.exe
 imfs_fslink.exe
 spwatchdog.exe
 libfdt01.exe
 psxualarm.exe
 mathf.exe
 tar03.exe
 imfs_fspermission.exe
 sp67.exe
 spconfig02.exe
 tm18.exe
 psxtmrwlock05.exe
 sp30.exe
 spstdthreads01.exe
 spfatal01.exe
 psxstrsignal01.exe
 psxtmrwlock04.exe
 block04.exe
 stackchk01.exe
 spstdc17.exe
 psxid01.exe
 dumpbuf01.exe
 sp08.exe
 psxtmthread01.exe
 psxkey10.exe
 dl05.exe
 getentropy01.exe
 cdtest.exe
 spintrcritical12.exe
 spport_err01.exe
 spintrcritical13.exe
 sptimecounter01.exe
 psx15.exe
 jffs2_fslink.exe
 dl07.exe
 spi01.exe
 rtmonuse.exe
 tm16.exe
 sp03.exe
 psxtmcleanup01.exe
 tmfine01.exe
 sprmsched02.exe
 devnullfatal01.exe
 mdosfs_fsrdwr.exe
 psxconfig01.exe
 psxsignal08.exe
 pwdgrp01.exe
 math.exe
 exit02.exe
 psxtmsem04.exe
 capture01.exe
 sperror02.exe
 termios01.exe
 paranoia.exe
 psxtmrwlock01.exe
 sptls04.exe
 spwkspace.exe
 psxtmkey02.exe
 tm13.exe
 sp35.exe
 top.exe
 spfatal30.exe
 speventtransient01.exe
 spfifo02.exe
 mouse01.exe
 sp75.exe
 psxtmmutexattr01.exe
 tm35.exe
 rcxx01.exe
 fsclose01.exe
 imfs_fserror.exe
 fsrfsbitmap01.exe
 psxtmsem03.exe
 termios07.exe
 psxtmmutex01.exe
 sp47.exe
 block05.exe
 whetstone.exe
 jffs2_fssymlink.exe
 psxualarm.exe
 cpuuse.exe
 psxtmmutex05.exe
 termios04.exe
 psx02.exe
 psx05.exe
 sptask_err02.exe
 ofw01.exe
 uid01.exe
 psxclock.exe
 spregion_err01.exe
 termios07.exe
 psxfile02.exe
 spfatal03.exe
 tm14.exe
 psxtmrwlock05.exe
 sp27a.exe
 psxgetattrnp01.exe
 linpack.exe
 sp68.exe
 dl04.exe
 psx16.exe
 spintrcritical10.exe
 paranoia.exe
 psxtmmutex02.exe
 sp72.exe
 tm30.exe
 irqs01.exe
 irqs01.exe
 spsimplesched02.exe
 block17.exe
 psxftw01.exe
 psxtmsleep01.exe
 tm04.exe
 psxtmrwlock06.exe
 psxautoinit01.exe
 mathl.exe
 uid01.exe
 fsnofs01.exe
 tm11.exe
 sp55.exe
 tmonetoone.exe
 spmkdir.exe
 sp15.exe
 sp50.exe
 sppercpudata01.exe
 spintrcritical05.exe
 spfatal04.exe
 sp22.exe
 spsem01.exe
 psxgetattrnp01.exe
 sptask_err03.exe
 block01.exe
 dhrystone.exe
 psxaio02.exe
 sp32.exe
 termios06.exe
 fsbdpart01.exe
 tm30.exe
 exit02.exe
 tm24.exe
 mathf.exe
 spfreechain01.exe
 sp21.exe
 psxtmmutex06.exe
 sppagesize.exe
 tm27.exe
 sperror02.exe
 termios08.exe
 sp32.exe
 tm13.exe
 sp77.exe
 jffs2_fspatheval.exe
 ts-terminate.exe
 spintrcritical15.exe
 psxinttypes01.exe
 sp58.exe
 psxid01.exe
 sp73.exe
 sp34.exe
 block02.exe
 spwkspace.exe
 ts-validation-timecounter-0.exe
 psxcancel.exe
 mdosfs_fstime.exe
 sprmsched02.exe
 psxmmap01.exe
 termios11.exe
 block14.exe
 termios08.exe
 sparsedisk01.exe
 fsimfsconfig01.exe
 spqreslib.exe
 tm29.exe
 tm09.exe
 psximfs01.exe
 imfs_fsrdwr.exe
 psxsignal02.exe
 mrfs_fsrdwr.exe
 imfs_fstime.exe
 psxchroot01.exe
 deviceio01.exe
 spnsext01.exe
 tm14.exe
 mdosfs_fspatheval.exe
 fileio.exe
 psxcond01.exe
 psxrdwrv.exe
 sp12.exe
 psxcleanup.exe
 sppartition_err01.exe
 dl09.exe
 fsdosfssync01.exe
 psxtmcond01.exe
 tm16.exe
 spfatal01.exe
 sp70.exe
 tm32.exe
 termios05.exe
 spheapprot.exe
 ts-validation-0.exe
 sp25.exe
 sp50.exe
 psxtmonce01.exe
 dl01.exe
 sptimerserver01.exe
 spthreadq01.exe
 spfatal30.exe
 psxitimer.exe
 ts-validation-tls-1.exe
 sptasknopreempt01.exe
 fsrfsbitmap01.exe
 getentropy01.exe
 stackchk.exe
 sp27a.exe
 tm26.exe
 sp20.exe
 mrfs_fspermission.exe
 tmonetoone.exe
 spedfsched04.exe
 tm34.exe
 psxcleanup.exe
 psxclock01.exe
 spcbssched01.exe
 sp76.exe
 i2c01.exe
 i2c01.exe
 nsecs.exe
 psxtmmutex06.exe
 spconfig01.exe
 devfs01.exe
 mimfs_fsrename.exe
 spintrcritical16.exe
 fsjffs2gc01.exe
 psxtmkey01.exe
 sp35.exe
 sp62.exe
 ts-validation-acfg-1.exe
 spwkspace.exe
 utf8proc01.exe
 spwatchdog.exe
 libfdt01.exe
 spintrcritical14.exe
 sprmsched01.exe
 sp18.exe
 psx04.exe
 splinkersets01.exe
 jffs2_fsscandir01.exe
 spfatal09.exe
 psxtmnanosleep01.exe
 psxtmcond10.exe
 rbheap01.exe
 ts-unit-no-clock-0.exe
 spfatal12.exe
 libfdt01.exe
 sp70.exe
 sp26.exe
 mimfs_fsrename.exe
 tm09.exe
 spnsext01.exe
 sha.exe
 flashdisk01.exe
 dl04.exe
 sp64.exe
 tm14.exe
 psxtmcond01.exe
 tm01.exe
 i2c01.exe
 termios.exe
 spfatal28.exe
 spstkalloc02.exe
 psxfilelock01.exe
 sptls01.exe
 psxtmonce01.exe
 mdosfs_fsstatvfs.exe
 record02.exe
 spratemon_err01.exe
 psxshm02.exe
 spintrcritical02.exe
 ts-fatal-too-large-tls-size.exe
 imfs_fspermission.exe
 psxbarrier01.exe
 spregion_err01.exe
 psxtmcond09.exe
 sp21.exe
 ts-validation-io-kernel.exe
 ticker.exe
 spcbssched03.exe
 sperror01.exe
 psxmsgq04.exe
 mimfs_fstime.exe
 spfifo02.exe
 sp66.exe
 psxspin01.exe
 sp42.exe
 mimfs_fssymlink.exe
 spfatal29.exe
 psxtmonce01.exe
 tztest.exe
 block04.exe
 psx16.exe
 psxtmmqrcvblock02.exe
 spobjgetnext.exe
 monitor.exe
 psxtmcond06.exe
 psxspin01.exe
 spmountmgr01.exe
 sp71.exe
 psxsignal05.exe
 ts-validation-0.exe
 block10.exe
 devnullfatal01.exe
 block10.exe
 sptasknopreempt01.exe
 psxkey05.exe
 psxshm01.exe
 tm03.exe
 psxtmbarrier03.exe
 rhtaskpreempt.exe
 tm15.exe
 spfatal26.exe
 spfatal14.exe
 sp06.exe
 rhtaskswitch.exe
 tm05.exe
 spthreadq01.exe
 psxtmmutex06.exe
 psxbarrier01.exe
 psxcond01.exe
 sptask_err04.exe
 crypt01.exe
 psxcleanup01.exe
 tm03.exe
 psxclockrealtime01.exe
 ts-validation-tls-0.exe
 termios10.exe
 spfatal09.exe
 spcbssched01.exe
 termios05.exe
 psxsignal03.exe
 psxclock01.exe
 sptimerserver01.exe
 sppagesize.exe
 psxpipe01.exe
 spstdc17.exe
 psxtmbarrier03.exe
 psxkey10.exe
 imfs_fslink.exe
 tar03.exe
 rhdeadlockbrk.exe
 psxsignal06.exe
 spintrcritical08.exe
 mouse01.exe
 psx01.exe
 fsdosfsname01.exe
 sp33.exe
 spchain.exe
 psxsignal04.exe
 spevent_err03.exe
 spsysinit01.exe
 psxaio01.exe
 fsdosfsformat01.exe
 block14.exe
 spclock_err01.exe
 spwatchdog.exe
 spfatal32.exe
 dhrystone.exe
 sptasknopreempt01.exe
 block09.exe
 psx16.exe
 psxusleep.exe
 spscheduler01.exe
 spmsgq_err02.exe
 sp56.exe
 spmsgq_err01.exe
 spedfsched01.exe
 psxtmbarrier04.exe
 psxstat.exe
 ttest01.exe
 spsignal_err01.exe
 tm18.exe
 psxtmbarrier02.exe
 block01.exe
 imfs_fsscandir01.exe
 malloctest.exe
 psxreaddir.exe
 rtmonuse.exe
 mrfs_fspatheval.exe
 sp65.exe
 sp07.exe
 spfatal10.exe
 sp69.exe
 spedfsched03.exe
 utf8proc01.exe
 termios02.exe
 termios10.exe
 spsem01.exe
 psxtmsem04.exe
 psxkey08.exe
 tm06.exe
 mdosfs_fsrdwr.exe
 spglobalcon01.exe
 sp64.exe
 spassoc01.exe
 psx12.exe
 spmrsp01.exe
 spcbssched03.exe
 jffs2_fstime.exe
 ts-validation-cache.exe
 fsimfsgeneric01.exe
 spclock_err02.exe
 mimfs_fsscandir01.exe
 spfatal04.exe
 tm29.exe
 psxcleanup02.exe
 psxtmkey02.exe
 stackchk01.exe
 newlib01.exe
 spmutex01.exe
 mrfs_fsfpathconf.exe
 mimfs_fssymlink.exe
 psxclock.exe
 block01.exe
 psxtmcond10.exe
 rhilatency.exe
 psxtmsem04.exe
 spcxx01.exe
 sp43.exe
 termios02.exe
 psxusleep.exe
 monitor.exe
 psxtmsem03.exe
 psxkey08.exe
 spglobalcon02.exe
 exit02.exe
 psxclassic01.exe
 block05.exe
 ts-validation-one-cpu-0.exe
 psxtmbarrierattr01.exe
 psxtmmutex03.exe
 termios06.exe
 sptimerserver01.exe
 fsdosfsname02.exe
 psx13.exe
 spversion01.exe
 mimfs_fspermission.exe
 block17.exe
 spintrcritical08.exe
 malloc02.exe
 termios06.exe
 spsimplesched01.exe
 sp55.exe
 psxinttypes01.exe
 spmkdir.exe
 psxkey06.exe
 psxmsgq02.exe
 psx04.exe
 tftpfs.exe
 sha.exe
 mouse01.exe
 spfatal34.exe
 spfatal33.exe
 spintr_err01.exe
 psxfile01.exe
 psxtime.exe
 ts-validation-acfg-0.exe
 psxmsgq02.exe
 pwdgrp01.exe
 sparsedisk01.exe
 sppps01.exe
 rhmlatency.exe
 sptls03.exe
 tm06.exe
 psxsysconf.exe
 psxconfstr.exe
 spcxx01.exe
 rhtaskpreempt.exe
 psxtmsleep01.exe
 psxconcurrency01.exe
 sp75.exe
 psxpasswd02.exe
 tm22.exe
 sp03.exe
 termios01.exe
 block12.exe
 ts-unit-no-clock-0.exe
 sp11.exe
 psxtmsem02.exe
 spratemon_err01.exe
 ts-validation-cache.exe
 tm21.exe
 psxstat.exe
 sptimecounter03.exe
 psxtmthread03.exe
 psxeintr_join.exe
 mimfs_fsscandir01.exe
 spintrcritical20.exe
 psxtmmutex07.exe
 sp24.exe
 psxtmmq01.exe
 spcache01.exe
 jffs2_fsrdwr.exe
 psxrwlock01.exe
 mimfs_fstime.exe
 spintrcritical20.exe
 dhrystone.exe
 psxdevctl01.exe
 psx04.exe
 psxalarm01.exe
 spscheduler01.exe
 dl08.exe
 termios.exe
 mimfs_fslink.exe
 sp04.exe
 psxtmnanosleep02.exe
 spcpucounter01.exe
 psxintrcritical01.exe
 spsimplesched03.exe
 spconsole01.exe
 sp27.exe
 spfifo05.exe
 psxcancel.exe
 imfs_fssymlink.exe
 psxtmthread04.exe
 spglobalcon01.exe
 tmtimer01.exe
 psxtmrwlock07.exe
 capture01.exe
 spmutex01.exe
 sp43.exe
 spchain.exe
 psxtmmutex04.exe
 psx03.exe
 mimfs_fstime.exe
 psxcancel01.exe
 ts-validation-tls-1.exe
 psxclassic01.exe
 spatomic01.exe
 tm35.exe
 mrfs_fspermission.exe
 spfifo03.exe
 spfifo01.exe
 spintrcritical10.exe
 spstkalloc03.exe
 sp63.exe
 ts-performance-no-clock-0.exe
 psxtmthread06.exe
 mrfs_fsrename.exe
 rcxx01.exe
 block09.exe
 psxsem01.exe
 spcache01.exe
 psxgetrusage01.exe
 spthread01.exe
 sp23.exe
 block15.exe
 spedfsched02.exe
 spstdthreads01.exe
 spmsgq_err01.exe
 md501.exe
 psxkey02.exe
 psxtmcleanup01.exe
 sp12.exe
 mrfs_fssymlink.exe
 spfatal29.exe
 sp15.exe
 monitor.exe
 speventsystem01.exe
 mdosfs_fspatheval.exe
 spfatal15.exe
 spunlimited01.exe
 sp52.exe
 tztest.exe
 tm08.exe
 psx12.exe
 psxtmcond08.exe
 fsimfsconfig03.exe
 psx09.exe
 imfs_fspatheval.exe
 spintrcritical05.exe
 cdtest.exe
 jffs2_fspatheval.exe
 psxtmbarrier01.exe
 tm02.exe
 sp67.exe
 sp37.exe
 spcpuset01.exe
 sptimecounter04.exe
 mrfs_fslink.exe
 ts-validation-timecounter-1.exe
 spsize.exe
 fsdosfssync01.exe
 cpuuse.exe
 psxclockrealtime01.exe
 psxtmcond04.exe
 psxtmmutex05.exe
 spstkalloc04.exe
 stringto01.exe
 psxautoinit02.exe
 psx15.exe
 spclock_err01.exe
 psxtmmutex02.exe
 spsem_err02.exe
 sp23.exe
 psxtimer_face01.exe
 psxtmmutex01.exe
 tm11.exe
 tm33.exe
 psxmutexattr01.exe
 dl03.exe
 spfreechain01.exe
 psxtmrwlock05.exe
 malloc02.exe
 tmfine01.exe
 sp17.exe
 spintrcritical18.exe
 malloctest.exe
 spthreadlife01.exe
 ticker.exe
 sptls03.exe
 block07.exe
 spthreadq01.exe
 sppps01.exe
 jffs2_fspermission.exe
 spstkalloc02.exe
 dl03.exe
 sp06.exe
 fsrfsbitmap01.exe
 psxcancel01.exe
 psxtmclocknanosleep03.exe
 psxmsgq02.exe
 sp48.exe
 tm36.exe
 spfatal12.exe
 psx08.exe
 tm23.exe
 psxtmthread02.exe
 psxkey02.exe
 sp46.exe
 spthreadlife01.exe
 psxtmcond08.exe
 sperror01.exe
 spintrcritical04.exe
 psxeintr_join.exe
 psxtmmutex04.exe
 termios08.exe
 spintrcritical14.exe
 newlib01.exe
 psxenosys.exe
 psxtmrwlock07.exe
 spsem03.exe
 psxtmrwlock03.exe
 tm13.exe
 ts-validation-non-smp.exe
 psxcleanup02.exe
 mdosfs_fsstatvfs.exe
 jffs2_fspermission.exe
 sp11.exe
 sp17.exe
 psxfile02.exe
 spintrcritical02.exe
 block06.exe
 fsrofs01.exe
 imfs_fsscandir01.exe
 deviceio01.exe
 tm10.exe
 rhmlatency.exe
 psxtmkey01.exe
 psxrwlock01.exe
 fsbdpart01.exe
 psxtmsleep02.exe
 spatomic01.exe
 sp23.exe
 tm11.exe
 sp62.exe
 tm33.exe
 block03.exe
 sp14.exe
 psxtmmqrcvblock02.exe
 complex.exe
 psxualarm.exe
 sp46.exe
 sp02.exe
 sp33.exe
 spintrcritical13.exe
 sptls03.exe
 tm22.exe
 psxglobalcon01.exe
 spintrcritical22.exe
 sp12.exe
 spsyslock01.exe
 psxtmnanosleep02.exe
 psxconfstr.exe
 spcontext01.exe
 psx10.exe
 psxrdwrv.exe
 psx02.exe
 psxtmthread02.exe
 psxkey07.exe
 speventtransient01.exe
 psxtmmq01.exe
 mrfs_fslink.exe
 sp71.exe
 sp72.exe
 tmcontext01.exe
 ttest02.exe
 fsdosfswrite01.exe
 imfs_fsrdwr.exe
 sp58.exe
 spfatal05.exe
 dl06.exe
 psx10.exe
 fsdosfswrite01.exe
 dl02.exe
 rcxx01.exe
 spsimplesched02.exe
 psxkey01.exe
 sp75.exe
 spfatal11.exe
 psx14.exe
 psxtmmqrcvblock02.exe
 sp57.exe
 psxndbm01.exe
 spfatal34.exe
 sptimer_err02.exe
 psxtmcond06.exe
 spmisc01.exe
 spsem03.exe
 fsimfsconfig03.exe
 sp31.exe
 bspcmdline01.exe
 sperror03.exe
 tm32.exe
 base_sp.exe
 sha.exe
 sp56.exe
 sp01.exe
 psxcond02.exe
 psxfatal01.exe
 tm26.exe
 psxmsgq04.exe
 tm19.exe
 psxtmkey01.exe
 spsize.exe
 sp40.exe
 fsdosfsname01.exe
 psxtmclocknanosleep03.exe
 psxtmbarrier04.exe
 sptask_err04.exe
 sptimespec01.exe
 unlimited.exe
 psxtmsem01.exe
 mimfs_fserror.exe
 psxreaddir.exe
 psxsignal07.exe
 sptimespec01.exe
 sptask_err03.exe
 psxtmbarrierattr01.exe
 dl01.exe
 psxkey04.exe
 tm34.exe
 tm26.exe
 mdosfs_fspatheval.exe
 dl10.exe
 psx06.exe
 psxmsgq01.exe
 mrfs_fspatheval.exe
 psxkey04.exe
 psxsignal06.exe
 mimfs_fspatheval.exe
 termios11.exe
 termios05.exe
 sp53.exe
 sptask_err03.exe
 sp52.exe
 spmountmgr01.exe
 ts-validation-tls-0.exe
 spintrcritical23.exe
 spthreadlife01.exe
 psxtmcond03.exe
 mimfs_fspatheval.exe
 psxstack01.exe
 sptls04.exe
 psxaio02.exe
 sp26.exe
 spintr_err01.exe
 psxaio01.exe
 psxsignal08.exe
 psx06.exe
 psxtmmutex03.exe
 devfs04.exe
 ts-terminate.exe
 psxtmmutex01.exe
 tm31.exe
 spevent_err03.exe
 block17.exe
 ts-userext.exe
 tm05.exe
 ts-fatal-too-large-tls-size.exe
 sp54.exe
 psxtmmq01.exe
 mdosfs_fstime.exe
 psxtimer01.exe
 psxtmcond05.exe
 psxsignal02.exe
 ts-validation-one-cpu-1.exe
 block08.exe
 spfatal32.exe
 capture.exe
 mimfs_fspatheval.exe
 devfs04.exe
 sparsedisk01.exe
 paranoia.exe
 hello.exe
 ts-validation-no-clock-0.exe
 psxtmclocknanosleep02.exe
 stackchk02.exe
 sperror03.exe
 tmck.exe
 tm16.exe
 sp66.exe
 psxtimes01.exe
 fsnofs01.exe
 spclock_todhook01.exe
 tm24.exe
 psxpasswd01.exe
 dl09.exe
 spcpucounter01.exe
 psxtmnanosleep02.exe
 jffs2_fserror.exe
 spfifo05.exe
 sp27a.exe
 psxtmcond04.exe
 sp04.exe
 spfatal34.exe
 ts-validation-one-cpu-0.exe
 mimfs_fspermission.exe
 psxmutexattr01.exe
 sp51.exe
 sperror03.exe
 tm12.exe
 psx07.exe
 tm20.exe
 spsem02.exe
 tm25.exe
 sp37.exe
 psxtmmutexattr01.exe
 psxsignal08.exe
 sp19.exe
 speventsystem01.exe
 psxtmthread05.exe
 sp44.exe
 spsimplesched01.exe
 sp54.exe
 sp48.exe
 spintrcritical12.exe
 sp51.exe
 tar02.exe
 ts-validation-intr.exe
 psxsysconf.exe
 ts-validation-io-kernel.exe
 psx01.exe
 spinternalerror02.exe
 psxaio03.exe
 sp55.exe
 psxpasswd01.exe
 ofw01.exe
 dl06.exe
 fsdosfsformat01.exe
 psxdevctl01.exe
 spintrcritical01.exe
 psxglobalcon01.exe
 ts-validation-tls-0.exe
 spfatal26.exe
 ts-validation-0.exe
 psxtmcond07.exe
 sp13.exe
 speventtransient01.exe
 rhdeadlockbrk.exe
 iostream.exe
 psxtmthread06.exe
 spstkalloc04.exe
 iostream.exe
 tm27.exe
 sptimer_err01.exe
 sp34.exe
 tm04.exe
 sptimer_err02.exe
 ts-validation-no-clock-0.exe
 psxkey09.exe
 whetstone.exe
 spversion01.exe
 termios.exe
 spclock_err02.exe
 psxaio03.exe
 block16.exe
 mdosfs_fserror.exe
 spregion_err01.exe
 sp40.exe
 psxtmcond03.exe
 psxconfig01.exe
 heapwalk.exe
 mrfs_fsrename.exe
 sp27.exe
 psxkey10.exe
 cpuuse.exe
 mdosfs_fsscandir01.exe
 spstkalloc04.exe
 psxautoinit01.exe
 ts-fatal-too-large-tls-size.exe
 psxtmcond02.exe
 psxalarm01.exe
 fileio.exe
 psxtmsem05.exe
 devnullfatal01.exe
 tar01.exe
 sperror02.exe
 spcbssched02.exe
 psxtmthread01.exe
 ts-validation-non-smp.exe
 sprbtree01.exe
 block03.exe
 sp01.exe
 spfatal31.exe
 psx15.exe
 tm12.exe
 imfs_fsrdwr.exe
 dl07.exe
 spmsgq_err01.exe
 block13.exe
 spconsole01.exe
 spntp01.exe
 psxtmmqrcvblock01.exe
 sp65.exe
 exit01.exe
 sp24.exe
 tmcontext01.exe
 tm10.exe
 psxinttypes01.exe
 sptimer_err01.exe
 psxitimer.exe
 imfs_fssymlink.exe
 ttest01.exe
 ttest02.exe
 spmsgq_err02.exe
 stringto01.exe
 tm34.exe
 sp08.exe
 spfifo01.exe
 psxtmthread02.exe
 spsem_err01.exe
 top.exe
 ts-validation-timecounter-0.exe
 rhtaskpreempt.exe
 splinkersets01.exe
 psxtmthread06.exe
 sp33.exe
 pwdgrp02.exe
 sptimecounter03.exe
 psxtmcleanup01.exe
 sptask_err02.exe
 mrfs_fserror.exe
 sp31.exe
 fsclose01.exe
 sp45.exe
 sp16.exe
 psxtmthread05.exe
 spunlimited01.exe
 psxtmbarrier01.exe
 psxclassic01.exe
 spintrcritical23.exe
 psxthreadname01.exe
 psxenosys.exe
 block04.exe
 md501.exe
 fsdosfssync01.exe
 iostream.exe
 spfatal14.exe
 termios04.exe
 psxconcurrency01.exe
 tm25.exe
 utf8proc01.exe
 psx11.exe
 block14.exe
 sp69.exe
 speventsystem01.exe
 psxtimer01.exe
 psxtmbarrier02.exe
 ts-validation-timecounter-0.exe
 psxstack01.exe
 psxtmsem03.exe
 fsdosfsformat01.exe
 bspcmdline01.exe
 psxtmcond05.exe
 tm07.exe
 getentropy01.exe
 block03.exe
 psxsem01.exe
 rhtaskswitch.exe
 mathf.exe
 psxtmsleep01.exe
 fsimfsconfig01.exe
 sptimecounter04.exe
 cdtest.exe
 sp07.exe
 psxstrsignal01.exe
 tm23.exe
 psxfchx01.exe
 sp54.exe
 tm17.exe
 psxsignal03.exe
 hello.exe
 termios10.exe
 tm19.exe
 spclock_err02.exe
 block10.exe
 spextensions01.exe
 psxkey01.exe
 psxtmsem01.exe
 sprmsched01.exe
 spstkalloc.exe
 sptask_err04.exe
 psx08.exe
 spcbssched01.exe
 sp04.exe
 sp77.exe
 psxstack02.exe
 tm15.exe
 tm28.exe
 ts-validation-1.exe
 jffs2_fsscandir01.exe
 psxrdwrv.exe
 spfatal11.exe
 psxsignal05.exe
 record01.exe
 fsimfsconfig03.exe
 psxtimer_face01.exe
 hello.exe
 psxspin01.exe
 ticker.exe
 psxkey03.exe
 spprintk.exe
 nsecs.exe
 spport_err01.exe
 spassoc01.exe
 spfatal31.exe
 fsdosfswrite01.exe
 mrfs_fssymlink.exe
 sp57.exe
 spfatal33.exe
 tztest.exe
 psxkey05.exe
 spstdthreads01.exe
 psxtmsem05.exe
 psxtmnanosleep01.exe
 spfatal14.exe
 spconfig02.exe
 spedfsched04.exe
 pwdgrp02.exe
 psxtmcond05.exe
 ts-performance-no-clock-0.exe
 jffs2_fslink.exe
 spport_err01.exe
 psxthreadname01.exe
 psxsignal01.exe
 psxfchx01.exe
 tm01.exe
 sp63.exe
 spprofiling01.exe
 uid01.exe
 record01.exe
 spintrcritical11.exe
 jffs2_fssymlink.exe
 ts-validation-acfg-1.exe
 psxdevctl01.exe
 psxmsgq03.exe
 spfifo03.exe
 base_sp.exe
 sp31.exe
 ttest02.exe
 heapwalk.exe
 psxmsgq03.exe
 spfatal11.exe
 psxrwlock01.exe
 spatomic01.exe
 tm20.exe
 spcbssched02.exe
 sptask_err01.exe
 jffs2_fslink.exe
 termios03.exe
 mrfs_fsfpathconf.exe
 imfs_fspermission.exe
 psxtmrwlock04.exe
 spextensions01.exe
 termios11.exe
 psxfile01.exe
 tmfine01.exe
 sp2038.exe
 spfatal05.exe
 psxcleanup02.exe
 spprofiling01.exe
 psxtmclocknanosleep01.exe
 whetstone.exe
 tm07.exe
 fsnofs01.exe
 fsdosfsname02.exe
 linpack.exe
 psxfatal02.exe
 exit03.exe
 sppagesize.exe
 devfs01.exe
 sp59.exe
 psxsem01.exe
 sp56.exe
 sp74.exe
 imfs_fstime.exe
 sp40.exe
 tm07.exe
 sptimecounter04.exe
 sp02.exe
 psxstack02.exe
 base_sp.exe
 spconfig01.exe
 tm22.exe
 psxmsgq03.exe
 psxaio03.exe
 spstkalloc.exe
 sp25.exe
 sp44.exe
 spscheduler01.exe
 mimfs_fslink.exe
 termios02.exe
 malloc04.exe
 psxcleanup01.exe
 spmkdir.exe
 psxtmthreadattr01.exe
 psxgetrusage01.exe
 sptls01.exe
 sp2038.exe
 sp25.exe
 sp35.exe
 psxobj01.exe
 linpack.exe
 rhilatency.exe
 sp43.exe
 imfs_fspatheval.exe
 sppartition_err01.exe
 spobjgetnext.exe
 psxonce01.exe
 psx05.exe
 spsimplesched03.exe
 psximfs02.exe
 psxfatal02.exe
 psxsignal05.exe
 spcxx01.exe
 psxglobalcon02.exe
 sp74.exe
 tm31.exe
 tm23.exe
 psxtmmutex07.exe
 tm35.exe
 sptimecounter02.exe
 psxconcurrency01.exe
 tm01.exe
 stackchk02.exe
 unlimited.exe
 mrfs_fstime.exe
 spmountmgr01.exe
 dl04.exe
 imfs_fspatheval.exe
 psxgetrusage01.exe
 psxshm02.exe
 sp65.exe
 sp13.exe
 iostream.exe
 spinternalerror01.exe
 jffs2_fsrdwr.exe
 spconsole01.exe
 psxobj01.exe
 sp11.exe
 spfatal29.exe
 psxtmcond07.exe
 psxkey01.exe
 spsem02.exe
 ts-fatal-init-task-construct-failed.exe
 dumpbuf01.exe
 psxmsgq01.exe
 psxfatal01.exe
 devfs01.exe
 psxndbm01.exe
 mdosfs_fsscandir01.exe
 psxobj01.exe
 mimfs_fssymlink.exe
 rhilatency.exe
 psxcancel01.exe
 spfatal05.exe
 psxusleep.exe
 sp64.exe
 block11.exe
 pwdgrp02.exe
 spmrsp01.exe
 spfifo01.exe
 spntp01.exe
 spclock_todhook01.exe
 sp60.exe
 psxtmthread04.exe
 sp02.exe
 spfatal31.exe
 sptimecounter01.exe
 sperror01.exe
 tar02.exe
 psxmount.exe
 sp14.exe
 psxtmbarrier03.exe
 psxfile02.exe
 sppercpudata01.exe
 rhsemshuffle.exe
 psxpipe01.exe
 exit03.exe
 deviceio01.exe
 psxtmkey02.exe
 fsrofs01.exe
 sp62.exe
 tm04.exe
 spsem_err01.exe
 spmsgq_err02.exe
 sp58.exe
 block08.exe
 spedfsched02.exe
 mdosfs_fserror.exe
 monitor02.exe
 ts-validation-one-cpu-1.exe
 psxftw01.exe
 sp07.exe
 psxkey06.exe
 fsimfsconfig02.exe
 spsignal_err01.exe
 psxfile01.exe
 spsem01.exe
 spedfsched03.exe
 sp18.exe
 spsimplesched03.exe
 sp21.exe
 psxautoinit02.exe
 psxtmsleep02.exe
 base_sp.exe
 spmisc01.exe
 psx05.exe
 sp48.exe
 malloc03.exe
 mrfs_fstime.exe
 sp49.exe
 spintrcritical09.exe
 psxshm01.exe
 psxtmcond08.exe
 stackchk01.exe
 capture.exe
 psxconfstr.exe
 rhsemshuffle.exe
 psxkey09.exe
 tmtimer01.exe
 psxstat.exe
 psxtimer02.exe
 spfatal03.exe
 tftpfs.exe
 sptls02.exe
 dl05.exe
 ts-terminate.exe
 block16.exe
 psxtmrwlock07.exe
 psx12.exe
 spassoc01.exe
 spthread01.exe
 sp49.exe
 psxtmrwlock01.exe
 psxtmclocknanosleep01.exe
 pwdgrp01.exe
 psxtmthread03.exe
 sptls04.exe
 sppartition_err01.exe
 tm10.exe
 splinkersets01.exe
 psxtmmutex02.exe
 sp38.exe
 psxcond02.exe
 sp73.exe
 tm12.exe
 sp38.exe
 psxgetattrnp01.exe
 spfatal15.exe
 flashdisk01.exe
 termios03.exe
 psxtmbarrier02.exe
 block11.exe
 fileio.exe
 shell01.exe
 spsem02.exe
 sptask_err01.exe
 psxtmbarrier01.exe
 spstkalloc.exe
 ts-validation-acfg-1.exe
 sp51.exe
 psxfchx01.exe
 sptls02.exe
 spintrcritical03.exe
 dl09.exe
 exit01.exe
 psxalarm01.exe
 sptimecounter01.exe
 sp16.exe
 crypt01.exe
 psxtmsleep02.exe
 spnsext01.exe
 capture.exe
 sp19.exe
 psxtmrwlock02.exe
 sp03.exe
 psxtmcond02.exe
 sp76.exe
 block13.exe
 sp05.exe
 spcpuset01.exe
 stringto01.exe
 tm15.exe
 tm08.exe
 sp46.exe
 psximfs02.exe
 psxchroot01.exe
 tmck.exe
 psxconfig01.exe
 ts-performance-no-clock-0.exe
 spintrcritical18.exe
 spfatal32.exe
 spobjgetnext.exe
 psxmount.exe
 psxbarrier01.exe
 unlimited.exe
 mimfs_fsrdwr.exe
 psxtmnanosleep01.exe
 dl05.exe
 block05.exe
 sp20.exe
 spsem_err01.exe
 spthread01.exe
 ts-fatal-init-task-construct-failed.exe
 monitor02.exe
 nsecs.exe
 sp68.exe
 putenvtest.exe
 ts-validation-timecounter-1.exe
 block15.exe
 sp08.exe
 fsjffs2gc01.exe
 psxfenv01.exe
 spversion01.exe
 spcpuset01.exe
 mrfs_fstime.exe
 psxtimer01.exe
 psximfs02.exe
 spfifo04.exe
 psxtimer02.exe
 block15.exe
 mrfs_fsrename.exe
 sp32.exe
 mrfs_fsrdwr.exe
 spfatal10.exe
 psxcond02.exe
 tm02.exe
 sp77.exe
 sp71.exe
 mimfs_fserror.exe
 psxtmmutex07.exe
 psxtmmutexattr01.exe
 ts-userext.exe
 stackchk.exe
 psxcond01.exe
 ts-fatal-init-task-construct-failed.exe
 tm27.exe
 psxautoinit01.exe
 psxtmrwlock03.exe
 jffs2_fstime.exe
 sppps01.exe
 block02.exe
 spcbssched02.exe
 spinternalerror02.exe
 psxintrcritical01.exe
 spi01.exe
 tm19.exe
 sprbtree01.exe
 spcontext01.exe
 sp24.exe
 fsimfsconfig02.exe
 sp19.exe
 spsem_err02.exe
 cdtest.exe
 spglobalcon02.exe
 spintrcritical21.exe
 psxtime.exe
 sp74.exe
 sp59.exe
 block07.exe
 complex.exe
 psxsignal06.exe
 fsfseeko01.exe
 mdosfs_fsscandir01.exe
 sptimecounter02.exe
 tftpfs.exe
 jffs2_fspermission.exe
 psxmmap01.exe
 psx07.exe
 jffs2_fsscandir01.exe
 spmrsp01.exe
 dl01.exe
 psx13.exe
 spinternalerror02.exe
 dumpbuf01.exe
 ofw01.exe
 spqreslib.exe
 mrfs_fslink.exe
 psxstack01.exe
 psximfs01.exe
 spprivenv01.exe
 psxtmclocknanosleep03.exe
 spcpucounter01.exe
 spfifo04.exe
 sprmsched01.exe
 termios09.exe
 sptimespec01.exe
 fsfseeko01.exe
 spprintk.exe
 imfs_fslink.exe
 sp49.exe
 sp53.exe
 sp68.exe
 exit01.exe
 sp20.exe
 fileio.exe
 psximfs01.exe
 termios07.exe
 sp16.exe
 psxtmclocknanosleep02.exe
 fsrofs01.exe
 sptimecounter03.exe
 psx10.exe
 spconfig01.exe
 spintrcritical21.exe
 tm08.exe
 psxsignal07.exe
 tm36.exe
 spfatal30.exe
 sp26.exe
 psxmsgq01.exe
 psxautoinit02.exe
 fsfseeko01.exe
 sp06.exe
 hello.exe
 psxkey02.exe
 sp37.exe
 tar01.exe
 tm30.exe
 spsem_err02.exe
 ts-validation-tls-1.exe
 psx01.exe
 psxtmcond09.exe
 rhsemshuffle.exe
 spprintk.exe
 psxtmthread04.exe
 spfreechain01.exe
 spchain.exe
 psxcancel.exe
 psxmutexattr01.exe
 spintrcritical03.exe
 mrfs_fspermission.exe
 spntp01.exe
 sp60.exe
 sp45.exe
 ts-validation-one-cpu-0.exe
 ts-validation-non-smp.exe
 psxtmthread05.exe
 mrfs_fsrdwr.exe
 psxsignal04.exe
 psxsignal02.exe
 spprivenv01.exe
 mrfs_fsscandir01.exe
 psx08.exe
 sp76.exe
 sp53.exe
 ts-validation-io-kernel.exe
 psxtmmqrcvblock01.exe
 sprbtree01.exe
 tm25.exe
 termios09.exe
 fsimfsgeneric01.exe
 tar02.exe
 sp29.exe
 sp15.exe
 sptls01.exe
 tm32.exe
 block16.exe
 psxtmthread03.exe
 spsem03.exe
 putenvtest.exe
 psx06.exe
 ts-unit-no-clock-0.exe
 psxfenv01.exe
 psxtmbarrierattr01.exe
 spstkalloc03.exe
 psxtime.exe
 rbheap01.exe
 tmcontext01.exe
 psxcleanup.exe
 tm17.exe
 spsyslock01.exe
 malloc03.exe
 sptls02.exe
 devfs04.exe
 psxpasswd02.exe
 spfifo05.exe
 complex.exe
 psxsignal01.exe
 malloc02.exe
 sp34.exe
 dl08.exe
 psxglobalcon02.exe
 psxid01.exe
 mrfs_fserror.exe
 record02.exe
 spfifo04.exe
 psxchroot01.exe
 ts-validation-one-cpu-1.exe
 nsecs.exe
 sp63.exe
 termios09.exe
 fsclose01.exe
 termios01.exe
 spprivenv01.exe
 jffs2_fserror.exe
 sp47.exe
 heapwalk.exe
 spfatal28.exe
 psxpasswd01.exe
 spinternalerror01.exe
 psxtmclocknanosleep01.exe
 psxcleanup01.exe
 crypt01.exe
 sp69.exe
 ts-validation-cache.exe
 mimfs_fsrdwr.exe
 sp41.exe
 imfs_fstime.exe
 tmck.exe
 mdosfs_fstime.exe
 sp2038.exe
 exit03.exe
 sp42.exe
 malloc03.exe
 psxkey03.exe
 spintrcritical01.exe
 ts-validation-intr.exe
 spinternalerror01.exe
 dl02.exe
 spintrcritical11.exe
 psx11.exe
 spstkalloc02.exe
 fsimfsconfig02.exe
 flashdisk01.exe
 block08.exe
 psxtmsem05.exe
 sp14.exe
 psxpasswd02.exe
 sp72.exe
 psx03.exe
 psxtmrwlock02.exe
 spprofiling01.exe
 psxtmsem02.exe
 record01.exe
 psxglobalcon01.exe
 mrfs_fserror.exe
 dl08.exe
 psxfatal02.exe
 psxtmcond09.exe
 ttest01.exe
 psxkey05.exe
 stackchk02.exe
 tm31.exe
 dl02.exe
 psxtmmutex03.exe
 spfatal01.exe
 tm28.exe
 jffs2_fserror.exe
 psx07.exe
 spcbssched03.exe
 fsjffs2gc01.exe
 sptask_err01.exe
 mrfs_fsscandir01.exe
 sp30.exe
 block12.exe
 psxsignal04.exe
 monitor02.exe
 psxkey07.exe
 malloctest.exe
 block06.exe
 psxtmclocknanosleep02.exe
 psxkey09.exe
 psx14.exe
 sp52.exe
 math.exe
 paranoia.exe
 spsignal_err01.exe
 psxitimer.exe
 fsimfsgeneric01.exe
 mimfs_fserror.exe
 dl10.exe
 psxstack02.exe
 sptask_err02.exe
 tm21.exe
 spsimplesched02.exe
 spcache01.exe
 psxfilelock01.exe
 psxkey07.exe
 dl06.exe
 spheapprot.exe
 psx14.exe
 mdosfs_fserror.exe
 tm17.exe
 sptimecounter02.exe
 tm20.exe
 sp60.exe
 sp01.exe
 psxtmmqrcvblock01.exe
 malloc04.exe
 sp66.exe
 spsysinit01.exe
 psxfenv01.exe
 stackchk.exe
 spi01.exe
 psxtimer02.exe
 newlib01.exe
 spedfsched01.exe
 ts-validation-acfg-0.exe
 block12.exe
 mrfs_fsfpathconf.exe
 sp41.exe
 spintrcritical24.exe
 defaultconfig01.exe
 rtmonuse.exe
 sp27.exe
 sp44.exe
 ticker.exe
 rhtaskswitch.exe
 ts-userext.exe
 psxtmthreadattr01.exe
 sp29.exe
 sp59.exe
 mrfs_fssymlink.exe
 putenvtest.exe
 mimfs_fspermission.exe
 ts-validation-timecounter-1.exe
 block09.exe
 sptimer_err02.exe
 sptimer_err01.exe
 sp05.exe
 psxpipe01.exe
 psxtimer_face01.exe
 block11.exe
 ts-validation-1.exe
 spedfsched03.exe
 spintrcritical22.exe
 sp50.exe
 psxtmcond10.exe
 psxkey06.exe
 psxtmcond07.exe
 tm24.exe
 spedfsched02.exe
 psxfatal01.exe
 imfs_fserror.exe
 spintrcritical15.exe
 rhdeadlockbrk.exe
 dl10.exe
 spcontext01.exe
 spheapprot.exe
 psxshm01.exe
 sp30.exe
 sp42.exe
 sp70.exe
 sp05.exe
 psxtmrwlock06.exe
 psx13.exe
 ts-validation-1.exe
 spmutex01.exe
 spfatal12.exe
 psxaio01.exe
 spsize.exe
 sp57.exe
 psx02.exe
 imfs_fsscandir01.exe
 psxtmbarrier04.exe
 spfifo02.exe
 psxtmrwlock06.exe
 tm18.exe
 ts-validation-intr.exe
 spsysinit01.exe
 psxtmcond01.exe
 defaultconfig01.exe
 psxsignal07.exe
 sp41.exe
 psxndbm01.exe
 spratemon_err01.exe
 psxftw01.exe
 psxmsgq04.exe
 tm05.exe
 rhmlatency.exe
 block02.exe
 ts-validation-acfg-0.exe
 psx09.exe
 sp13.exe
 fsimfsconfig01.exe
 psxthreadname01.exe
 dl03.exe
 psx11.exe
 spintr_err01.exe
 tmonetoone.exe
 psxonce01.exe
 capture.exe
 spfatal03.exe
 psxenosys.exe
 psxtmthread01.exe
 tm09.exe
 spevent_err03.exe
 sp47.exe
 spfifo03.exe
 mathl.exe
 sprmsched02.exe
 tm33.exe
 math.exe
 jffs2_fstime.exe
 tm02.exe
 fsdosfsname01.exe
 sp73.exe
 psxtmthreadattr01.exe
 tm21.exe
 shell01.exe
 spconfig02.exe
 mimfs_fsscandir01.exe
 psxkey08.exe
 sp22.exe
 sppercpudata01.exe
 tmtimer01.exe
 psxtimes01.exe
 psxtmcond03.exe
 spintrcritical24.exe
 psxtmcond04.exe
 jffs2_fspatheval.exe
 imfs_fssymlink.exe
 unlimited.exe
 termios04.exe
 psxkey04.exe
 psxsignal01.exe
 sp67.exe
 mimfs_fsrdwr.exe
 spfatal09.exe
 psx03.exe
 mimfs_fsrename.exe
 spextensions01.exe
 jffs2_fssymlink.exe
 spintrcritical16.exe
 malloc04.exe
 spintrcritical09.exe
 block06.exe
 psxmmap01.exe
 bspcmdline01.exe
 tm03.exe
 ts-validation-no-clock-0.exe
 spstkalloc03.exe
 record02.exe
 spfatal15.exe
 spqreslib.exe
 spfatal10.exe
 psxtmmutex05.exe
 spglobalcon01.exe
 psxsysconf.exe
 capture01.exe
 sp22.exe
 psxonce01.exe
 tm36.exe
 psxtmmutex04.exe
 shell01.exe
 psxclock.exe
 top.exe
 sp45.exe
 psxmount.exe
 psxtmsem01.exe
 psxtimes01.exe
 tm06.exe
 psxtmsem02.exe
 irqs01.exe
 psxtmrwlock02.exe
 mrfs_fspatheval.exe
 spunlimited01.exe
 psxtmrwlock04.exe
 psxtmcond02.exe
 termios03.exe
 mdosfs_fsrdwr.exe
 psxstrsignal01.exe
 sp17.exe
 sp38.exe
 spsimplesched01.exe
 imfs_fserror.exe
 mrfs_fsscandir01.exe
 tm28.exe
 fsbdpart01.exe
 mathl.exe
 jffs2_fsrdwr.exe
Average test time: 0:00:00.067290
Testing time     : 0:02:04.823209