[rtems-test] powerpc/psim: RTEMS_POSIX_API: Passed:608 Failed:6 Timeout:1 Test-Too-long:0 Invalid:0 Wrong:0

OAR Tester rtems-tester at oarcorp.com
Sun Oct 30 04:29:16 UTC 2022


Testing time     : 0:10:05.483876
Average test time: 0:00:00.968774

Host
====
FreeBSD-12.3-RELEASE-p5-amd64-64bit-ELF (FreeBSD VM-FreeBSD12 12.3-RELEASE-p5 FreeBSD 12.3-RELEASE-p5 GENERIC amd64 amd64)

Configuration
=============
Version: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
Build  : RTEMS_POSIX_API
Tools  : 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)

Summary
=======

Passed:        608
Failed:          6
User Input:      6
Expected Fail:   1
Indeterminate:   0
Benchmark:       3
Timeout:         1
Test too long:   0
Invalid:         0
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
Wrong Header:    0
------------------
Total:         625

Failures:
 fsimfsgeneric01.exe
 dl06.exe
 psx12.exe
 psxkey08.exe
 spfatal31.exe
 minimum.exe
User Input:
 top.exe
 termios.exe
 monitor.exe
 dl10.exe
 fileio.exe
 capture.exe
Expected Fail:
 ts-validation-intr.exe
Benchmark:
 dhrystone.exe
 whetstone.exe
 linpack.exe
Timeouts:
 psx04.exe
Log
===

RTEMS Testing - Tester, 6.0.not_released
 Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail .
 Host: FreeBSD VM-FreeBSD12 12.3-RELEASE-p5 FreeBSD 12.3-RELEASE-p5 GENERIC amd64
 Python: 2.7.18 (default, Jul  3 2022, 01:16:43) [GCC FreeBSD Clang 10.0.1 (git at github.com:llvm/llvm-project.git llvmorg-10.0.1-
Host: FreeBSD-12.3-RELEASE-p5-amd64-64bit-ELF (FreeBSD VM-FreeBSD12 12.3-RELEASE-p5 FreeBSD 12.3-RELEASE-p5 GENERIC amd64 amd64)
[  1/625] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | powerpc/psim: dhrystone.exe
 <<skipping passes>>
[ 15/625] p:5   f:0   u:0   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: fsimfsgeneric01.exe
Result: failed    
Time: 0:00:00.781393 fsimfsgeneric01.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=>  target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=>  Connected to the simulator.
=>  load
=>  run
=>  Starting program: /usr/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe 
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=>  test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
] RTEMS tools: 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)
] executing thread ID: 0x0a010001
] executing thread name: UI1 
=>  [Inferior 1 (process 42000) exited with code 074]
[ 16/625] p:5   f:0   u:0   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: fsjffs2gc01.exe
 <<skipping passes>>
[ 94/625] p:82  f:1   u:0   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: dl06.exe
Result: failed    
Time: 0:00:03.923148 dl06.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=>  target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=>  Connected to the simulator.
=>  load
=>  run
=>  Starting program: /usr/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe 
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=>  test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
] RTEMS tools: 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)
] executing thread ID: 0x0a010001
] executing thread name: UI1 
=>  [Inferior 1 (process 42000) exited with code 074]
[ 95/625] p:84  f:1   u:0   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: dl07.exe
 <<skipping passes>>
[162/625] p:145 f:2   u:4   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: psx04.exe
Result: timeout   
Time: 0:03:18.973792 psx04.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx04.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx04.exe...
=>  target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=>  Connected to the simulator.
=>  load
=>  run
=>  Starting program: /usr/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx04.exe 
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=>  test start: PSX 4
] *** BEGIN OF TEST PSX 4 ***
] *** TEST VERSION: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)
] Init's ID is 0x0b010001
] Init: sigwait - EINVAL (NULL set)
] Init: sigwait - EINVAL (NULL set)
] Init: sigemptyset -  set= 0x00000000
] "2"
] Init:  (2)
] Task_1: 3 seconds left
] Task_1: exit
] Init: Unblock SIGALRM
] Init: Firing alarm in 5 seconds
] Init: 0 seconds left on previous alarm
] Init: Firing alarm in 2 seconds
] Init: 5 seconds left on previous alarm
] Init: Wait 4 seconds for alarm
] Signal: 14 caught by 0xb010001 (3)
] Init: 2 seconds left in sleep
] Init: Block SIGUSR1 and SIGUSR2 only
] Init: Previous blocked set was 0x01000000
] Init: Current blocked set is 0x03000000
] Init: Unblock all signals
] Init: Previous blocked set was 0x03000000
] Init: create a thread to send Init SIGUSR1
] Init: sigsuspend for any signal
] Task_2: sending SIGUSR1
] Task_2: exit
] Signal: 25 caught by 0xb010001 (4)
] Init: awakended from sigsuspend status=-0000001 
] Init: create a thread to sent Process SIGUSR1 with SA_SIGINFO
] Init: sleep so the Task_3 can sAL (set invalid)
] Init: sigfillset - EINVAL (set invalid)
] Init: sigaddset - EINVAL (set invalid)
] Init: sigaddset - EINVAL (signal = 0)
] Init: sigaddset - EINVAL (set invalid)
] Init: sigdelset - EINVAL (set invalid)
] Init: sigdelset - SUCCESSFUL (signal = 0)
] Init: sigdelset - EINVAL (set invalid)
] Init: sigismember - EINVAL (set invalid)
] Init: sigismember - SUCCESSFUL (signal = 0)
] Init: sigismember - EINVAL (signal invalid)
] Init: sigaction - EINVAL (signal = 0)
] Init: sigaction - EINVAL (signal invalid)
] Init: sigaction - EINVAL (SIGKILL)
] Init: pthread_sigmask - EINVAL (set and oset invalid)
] Init: pthread_sigmask - EINVAL (how invalid)
] Init: sigpending - EINVAL (set invalid)
] Task_3: exit
] Init: pthread_sigmask - EINVAL (timout->nsec invalid < 0)
] *** TIMEOUT TIMEOUT
[163/625] p:146 f:2   u:4   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: psx05.exe
 <<skipping passes>>
[170/625] p:153 f:2   u:4   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: psx12.exe
Result: failed    
Time: 0:00:03.403384 psx12.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=>  target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=>  Connected to the simulator.
=>  load
=>  run
=>  Starting program: /usr/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe 
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=>  test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H  97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
] RTEMS tools: 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)
] executing thread ID: 0x0b010001
] executing thread name: 
=>  [Inferior 1 (process 42000) exited with code 070]
[171/625] p:154 f:2   u:4   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: psx13.exe
 <<skipping passes>>
[225/625] p:207 f:3   u:4   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: psxkey08.exe
Result: failed    
Time: 0:00:02.907577 psxkey08.exe
=>  gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet ./b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=>  Reading symbols from ./b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=>  target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=>  Connected to the simulator.
=>  load
=>  run
=>  Starting program: /usr/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe 
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=>  test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.89ba2a9838558841c4f38283e84b99173790d61c
] RTEMS tools: 12.2.1 20221014 (RTEMS 6, RSB cb8821e93378118e78a9cb25859789b126bd5761, Newlib 0b6342c)
] executing thread ID: 0x0a010001
] executing thread name: UI1 
=>  [Inferior 1 (process 42000) exited with code 074]
[226/625] p:209 f:3   u:4   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | powerpc/psim: psxkey09.exe
 <<skipping passes>>
[625/625] p:601 f:6   u:6   e:0   I:0   B:3   t:1   L:0   i:0   W:0   | powerpc/psim: ts-validation-tls-1.exe

Passed:        608
Failed:          6
User Input:      6
Expected Fail:   1
Indeterminate:   0
Benchmark:       3
Timeout:         1
Test too long:   0
Invalid:         0
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
Wrong Header:    0
------------------
Total:         625
Failures:
 fsimfsgeneric01.exe
 dl06.exe
 psx12.exe
 psxkey08.exe
 spfatal31.exe
 minimum.exe
User Input:
 top.exe
 termios.exe
 monitor.exe
 dl10.exe
 fileio.exe
 capture.exe
Expected Fail:
 ts-validation-intr.exe
Benchmark:
 dhrystone.exe
 whetstone.exe
 linpack.exe
Timeouts:
 psx04.exe
Average test time: 0:00:00.968774
Testing time     : 0:10:05.483876


More information about the build mailing list