Build FreeBSD: FAILED 6/rtems-mips on x86_64-freebsd12.2 (mips-rtems6-gcc-3a83d00-newlib-783133b-x86_64-freebsd12.2-1)
chrisj at rtems.org
chrisj at rtems.org
Thu Sep 8 15:15:29 UTC 2022
RTEMS Source Builder - Set Builder, 6 (ec696356dbb3)
Host: FreeBSD-12.2-RELEASE-p3-amd64-64bit-ELF
FreeBSD hihi 12.2-RELEASE-p3 FreeBSD 12.2-RELEASE-p3 GENERIC amd64 amd64
Build Time: 0:07:40.026714
Output
======
Build Set: 6/rtems-mips
Build Set: tools/rtems-default-tools.bset
config: devel/dtc-1.6.1-1.cfg
package: dtc-1.6.1-x86_64-freebsd12.2-1
building: dtc-1.6.1-x86_64-freebsd12.2-1
sizes: dtc-1.6.1-x86_64-freebsd12.2-1: 4.144MB (installed: 1.106MB)
cleaning: dtc-1.6.1-x86_64-freebsd12.2-1
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-freebsd12.2-1.txt
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-freebsd12.2-1.xml
config: devel/expat-2.4.8-1.cfg
package: expat-2.4.8-x86_64-freebsd12.2-1
building: expat-2.4.8-x86_64-freebsd12.2-1
sizes: expat-2.4.8-x86_64-freebsd12.2-1: 6.523MB (installed: 718.609KB)
cleaning: expat-2.4.8-x86_64-freebsd12.2-1
reporting: devel/expat-2.4.8-1.cfg -> expat-2.4.8-x86_64-freebsd12.2-1.txt
reporting: devel/expat-2.4.8-1.cfg -> expat-2.4.8-x86_64-freebsd12.2-1.xml
config: devel/gmp-6.2.1.cfg
package: gmp-6.2.1-x86_64-freebsd12.2-1
building: gmp-6.2.1-x86_64-freebsd12.2-1
sizes: gmp-6.2.1-x86_64-freebsd12.2-1: 22.791MB (installed: 1.763MB)
cleaning: gmp-6.2.1-x86_64-freebsd12.2-1
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-freebsd12.2-1.txt
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-freebsd12.2-1.xml
config: tools/rtems-gdb-11.2.cfg
package: mips-rtems6-gdb-11.2-x86_64-freebsd12.2-1
building: mips-rtems6-gdb-11.2-x86_64-freebsd12.2-1
sizes: mips-rtems6-gdb-11.2-x86_64-freebsd12.2-1: 262.260MB (installed: 17.565MB)
cleaning: mips-rtems6-gdb-11.2-x86_64-freebsd12.2-1
reporting: tools/rtems-gdb-11.2.cfg -> mips-rtems6-gdb-11.2-x86_64-freebsd12.2-1.txt
reporting: tools/rtems-gdb-11.2.cfg -> mips-rtems6-gdb-11.2-x86_64-freebsd12.2-1.xml
config: tools/rtems-binutils-2.38.cfg
package: mips-rtems6-binutils-2.38-x86_64-freebsd12.2-1
building: mips-rtems6-binutils-2.38-x86_64-freebsd12.2-1
sizes: mips-rtems6-binutils-2.38-x86_64-freebsd12.2-1: 336.887MB (installed: 38.037MB)
cleaning: mips-rtems6-binutils-2.38-x86_64-freebsd12.2-1
reporting: tools/rtems-binutils-2.38.cfg -> mips-rtems6-binutils-2.38-x86_64-freebsd12.2-1.txt
reporting: tools/rtems-binutils-2.38.cfg -> mips-rtems6-binutils-2.38-x86_64-freebsd12.2-1.xml
config: tools/rtems-gcc-12-newlib-head.cfg
package: mips-rtems6-gcc-3a83d00-newlib-783133b-x86_64-freebsd12.2-1
building: mips-rtems6-gcc-3a83d00-newlib-783133b-x86_64-freebsd12.2-1
error: building mips-rtems6-gcc-3a83d00-newlib-783133b-x86_64-freebsd12.2-1
Build FAILED
See error report: rsb-report-mips-rtems6-gcc-3a83d00-newlib-783133b-x86_64-freebsd12.2-1.txt
error: building mips-rtems6-gcc-3a83d00-newlib-783133b-x86_64-freebsd12.2-1
config: tools/rtems-tools-6.cfg
package: rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0-1
building: rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0-1
sizes: rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0-1: 301.858MB (installed: 77.624MB)
cleaning: rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0-1.xml
cleaning: dtc-1.6.1-x86_64-freebsd12.2-1
cleaning: expat-2.4.8-x86_64-freebsd12.2-1
cleaning: gmp-6.2.1-x86_64-freebsd12.2-1
cleaning: mips-rtems6-gdb-11.2-x86_64-freebsd12.2-1
cleaning: mips-rtems6-binutils-2.38-x86_64-freebsd12.2-1
cleaning: rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0-1
Build Sizes: usage: 473.685MB total: 8.034GB (sources: 7.893GB, patches: 7.421MB, installed 136.798MB)
Build Set: Time 0:06:25.109201
config: tools/rtems-mipstx39-gdb-11.2.cfg
package: mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1
building: mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1
sizes: mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1: 261.246MB (installed: 17.321MB)
cleaning: mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1
reporting: tools/rtems-mipstx39-gdb-11.2.cfg -> mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1.txt
reporting: tools/rtems-mipstx39-gdb-11.2.cfg -> mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1.xml
installing: mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1 -> /build/rtems/tools/6
cleaning: mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:08:05 2022
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-freebsd12.2-1
Config: devel/dtc-1.6.1-1.cfg
Summary:
Device Tree Compiler v1.6.1 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
https://www.devicetree.org/
Version:
1.6.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.6.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.6.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
gmake PREFIX=/build/rtems/tools/6
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.6.1
gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/build/rtems/tools/6 install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:08:05 2022
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-freebsd12.2-1
Config: devel/dtc-1.6.1-1.cfg
Summary:
Device Tree Compiler v1.6.1 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
https://www.devicetree.org/
Version:
1.6.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.6.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.6.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
gmake PREFIX=/build/rtems/tools/6
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.6.1
gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/build/rtems/tools/6 install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:08:09 2022
==============================================================================
Report: devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.4.8-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
Package: expat-2.4.8-x86_64-freebsd12.2-1
Config: devel/expat-2.4.8-1.cfg
Summary:
Expat XML Parser v2.4.8 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
http://expat.sourceforge.net/
Version:
2.4.8
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_4_8/expat-2.4.8.tar.gz
sha256: 398f6d95bf808d3108e27547b372cb4ac8dc2298a3c4251eb7aa3d4c6d4bb3e2
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.4.8
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.4.8
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --verbose --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info --disable-shared
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.4.8
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:08:09 2022
==============================================================================
Report: devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.4.8-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.4.8-1.cfg
------------------------------------------------------------------------------
Package: expat-2.4.8-x86_64-freebsd12.2-1
Config: devel/expat-2.4.8-1.cfg
Summary:
Expat XML Parser v2.4.8 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
http://expat.sourceforge.net/
Version:
2.4.8
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_4_8/expat-2.4.8.tar.gz
sha256: 398f6d95bf808d3108e27547b372cb4ac8dc2298a3c4251eb7aa3d4c6d4bb3e2
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.4.8
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.4.8
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --verbose --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info --disable-shared
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.4.8
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:08:24 2022
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-freebsd12.2-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --verbose --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info --disable-shared
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:08:24 2022
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-freebsd12.2-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --verbose --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info --disable-shared
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
gmake DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:09:38 2022
==============================================================================
Report: tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gdb-11.2-x86_64-freebsd12.2-1
Config: tools/rtems-gdb-11.2.cfg
Summary:
GDB v11.2 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
http://www.gnu.org/software/gdb/
Version:
11.2
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-11.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mips-rtems6" -o "x86_64-freebsd12.2" == "mips-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --target=mips-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --enable-sim-hardware --without-zlib --with-expat --with-guile=no --with-libiconv-prefix=/usr/local --with-python=/usr/local/bin/python3 --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:09:38 2022
==============================================================================
Report: tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gdb-11.2-x86_64-freebsd12.2-1
Config: tools/rtems-gdb-11.2.cfg
Summary:
GDB v11.2 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
http://www.gnu.org/software/gdb/
Version:
11.2
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-11.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mips-rtems6" -o "x86_64-freebsd12.2" == "mips-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --target=mips-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --enable-sim-hardware --without-zlib --with-expat --with-guile=no --with-libiconv-prefix=/usr/local --with-python=/usr/local/bin/python3 --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:10:12 2022
==============================================================================
Report: tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.38.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-binutils-2.38-x86_64-freebsd12.2-1
Config: tools/rtems-binutils-2.38.cfg
Summary:
Binutils v2.38 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
http://sources.redhat.com/binutils
Version:
2.38
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.38.tar.bz2
sha512: 7690b4158bd6587a85c6b98903980b9ac6f16b47f7fd1e60986b0a70388bedcfdc05d75597aa49c81fec1609ce24bed6c26583f76fd2471a9d63394fd9798afc
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.38"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mips-rtems6" -o "x86_64-freebsd12.2" == "mips-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --target=mips-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info
gmake -j 16 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/build/rtems/tools/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/6/bin/mips-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/share/man/man1/mips-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/6/bin/mips-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/share/man/man1/mips-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/6/bin/mips-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/share/man/man1/mips-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/6/bin/mips-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/share/man/man1/mips-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:10:12 2022
==============================================================================
Report: tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.38.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.38.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-binutils-2.38-x86_64-freebsd12.2-1
Config: tools/rtems-binutils-2.38.cfg
Summary:
Binutils v2.38 for target mips-rtems6 on host x86_64-freebsd12.2
URL:
http://sources.redhat.com/binutils
Version:
2.38
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.38.tar.bz2
sha512: 7690b4158bd6587a85c6b98903980b9ac6f16b47f7fd1e60986b0a70388bedcfdc05d75597aa49c81fec1609ce24bed6c26583f76fd2471a9d63394fd9798afc
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.38"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mips-rtems6" -o "x86_64-freebsd12.2" == "mips-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --target=mips-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info
gmake -j 16 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/build/rtems/tools/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/6/bin/mips-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/share/man/man1/mips-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/6/bin/mips-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/share/man/man1/mips-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/6/bin/mips-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/share/man/man1/mips-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/build/rtems/tools/6/bin/mips-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/build/rtems/tools/6/share/man/man1/mips-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:14:02 2022
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools 1cd476e155b3bb236b9bf5f79614cdced8d416a0 for host x86_64-freebsd12.2
URL:
http://www.rtems.org/
Version:
1cd476e155b3bb236b9bf5f79614cdced8d416a0
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0.tar.bz2
sha512: oJ5RzHDsye/mM8cicHE9lD8avxlv/ZYbXjNO2MPMCwHHhDThSh7O0hi70ywaGLrQXSt1mywvKwDwBNH3hJRiEQ==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
RT_HOST="--host=x86_64-freebsd12.2"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/build/rtems/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:14:02 2022
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools 1cd476e155b3bb236b9bf5f79614cdced8d416a0 for host x86_64-freebsd12.2
URL:
http://www.rtems.org/
Version:
1cd476e155b3bb236b9bf5f79614cdced8d416a0
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0.tar.bz2
sha512: oJ5RzHDsye/mM8cicHE9lD8avxlv/ZYbXjNO2MPMCwHHhDThSh7O0hi70ywaGLrQXSt1mywvKwDwBNH3hJRiEQ==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-1cd476e155b3bb236b9bf5f79614cdced8d416a0
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
RT_HOST="--host=x86_64-freebsd12.2"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/build/rtems/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:15:26 2022
==============================================================================
Report: tools/rtems-mipstx39-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-mipstx39-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-mipstx39-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1
Config: tools/rtems-mipstx39-gdb-11.2.cfg
Summary:
GDB v11.2 for target mipstx39-rtems6 on host x86_64-freebsd12.2
URL:
http://www.gnu.org/software/gdb/
Version:
11.2
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-11.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mipstx39-rtems6" -o "x86_64-freebsd12.2" == "mipstx39-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --target=mipstx39-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --enable-sim-hardware --without-zlib --with-expat --with-guile=no --with-libiconv-prefix=/usr/local --with-python=/usr/local/bin/python3 --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Sep 9 01:15:26 2022
==============================================================================
Report: tools/rtems-mipstx39-gdb-11.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: ec696356dbb3f8832ba375de48b88e5f9cd8a7f4
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-mipstx39-gdb-11.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-mipstx39-gdb-11.2.cfg
------------------------------------------------------------------------------
Package: mipstx39-rtems6-gdb-11.2-x86_64-freebsd12.2-1
Config: tools/rtems-mipstx39-gdb-11.2.cfg
Summary:
GDB v11.2 for target mipstx39-rtems6 on host x86_64-freebsd12.2
URL:
http://www.gnu.org/software/gdb/
Version:
11.2
Release:
1
Sources: 1
1: http://ftp.gnu.org/gnu/gdb/gdb-11.2.tar.xz
sha512: 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127
Patches: 0
Preparation:
build_top=$(pwd)
gdb_source="gdb-11.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mipstx39-rtems6" -o "x86_64-freebsd12.2" == "mipstx39-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
# Cross build
CC=$(echo "x86_64-freebsd12.2-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-freebsd12.2-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-freebsd12.2" != "x86_64-freebsd12.2" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-freebsd12.2 --host=x86_64-freebsd12.2 --target=mipstx39-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --enable-sim-hardware --without-zlib --with-expat --with-guile=no --with-libiconv-prefix=/usr/local --with-python=/usr/local/bin/python3 --prefix=/build/rtems/tools/6 --bindir=/build/rtems/tools/6/bin --exec-prefix=/build/rtems/tools/6 --includedir=/build/rtems/tools/6/include --libdir=/build/rtems/tools/6/lib --mandir=/build/rtems/tools/6/share/man --infodir=/build/rtems/tools/6/share/info
gmake -j 16 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
gmake DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/build/rtems/tools/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
touch $SB_BUILD_ROOT/build/rtems/tools/6/share/info/dir
cd ${build_top}
More information about the build
mailing list