Build CYGWIN_NT-10.0-19044: FAILED devel/qemu on x86_64-pc-cygwin (gettext-0.18.3.1-x86_64-pc-cygwin-1)

Fri Sep 30 00:15:39 UTC 2022

==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 29 19:16:55 2022
==============================================================================
Report: devel/libiconv-1.14-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: 336f15cc754d994b1988c23da7137b67c454ec31
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libiconv-1.14-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libiconv-1.14-1.cfg
------------------------------------------------------------------------------
Package: libiconv-1.14-x86_64-pc-cygwin-1
 Config: devel/libiconv-1.14-1.cfg
 Summary:
  Provides an iconv() implementation, for use on systems which
  do not have one, or whose implementation cannot convert from/to
  Unicode.
 URL:
  http://www.gnu.org/software/libiconv/
 Version:
  1.14
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz
       sha512: uWd0/vxPodB5SPzGZwJ3ATc8NOv5xBAQAEKOBIrd2FpbteBeWfgOt4OjBUo6ijwNqQlFAFMnW7vz/95RHrPzhw==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_libiconv="libiconv-1.14"
  %setup source libiconv -q -n libiconv-1.14
  %setup patch libiconv -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "" -o "x86_64-pc-cygwin" == "" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_libiconv}/configure  --prefix=/home/rtems-tester/rtems-cron-6/tools/6  --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec_prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include  --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --libexecdir=/home/rtems-tester/rtems-cron-6/tools/6/libexec  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man  --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info  --datadir=/home/rtems-tester/rtems-cron-6/tools/6/share  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 29 19:16:56 2022
==============================================================================
Report: devel/libiconv-1.14-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Repository is dirty
 Head:
  Commit: 336f15cc754d994b1988c23da7137b67c454ec31
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libiconv-1.14-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libiconv-1.14-1.cfg
------------------------------------------------------------------------------
Package: libiconv-1.14-x86_64-pc-cygwin-1
 Config: devel/libiconv-1.14-1.cfg
 Summary:
  Provides an iconv() implementation, for use on systems which
  do not have one, or whose implementation cannot convert from/to
  Unicode.
 URL:
  http://www.gnu.org/software/libiconv/
 Version:
  1.14
 Release:
  1
  Sources: 1
    1: http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz
       sha512: uWd0/vxPodB5SPzGZwJ3ATc8NOv5xBAQAEKOBIrd2FpbteBeWfgOt4OjBUo6ijwNqQlFAFMnW7vz/95RHrPzhw==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_libiconv="libiconv-1.14"
  %setup source libiconv -q -n libiconv-1.14
  %setup patch libiconv -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "" -o "x86_64-pc-cygwin" == "" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
    # Cross build
    CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_libiconv}/configure  --prefix=/home/rtems-tester/rtems-cron-6/tools/6  --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin  --exec_prefix=/home/rtems-tester/rtems-cron-6/tools/6  --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include  --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib  --libexecdir=/home/rtems-tester/rtems-cron-6/tools/6/libexec  --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man  --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info  --datadir=/home/rtems-tester/rtems-cron-6/tools/6/share  --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}