Build CYGWIN_NT-10.0-19045: FAILED 6/rtems-powerpc on x86_64-pc-cygwin (powerpc-rtems6-gcc-506cb58-newlib-a021448-x86_64-pc-cygwin-1)
OAR Tester for Windows10 Cygwin
rtems-tester at oarcorp.com
Fri Jul 28 05:15:48 UTC 2023
RTEMS Source Builder - Set Builder, 6 (fc4426c956c1)
Host: CYGWIN_NT-10.0-19045-3.4.7-1.x86_64-x86_64-64bit-WindowsPE
CYGWIN_NT-10.0-19045 VM-Windows10 3.4.7-1.x86_64 2023-06-16 14:04 UTC
x86_64
Build Time: 2:13:03.819871
Output
======
Build Set: 6/rtems-powerpc
Build Set: tools/rtems-default-tools.bset
config: devel/dtc-1.6.1-1.cfg
package: dtc-1.6.1-x86_64-pc-cygwin-1
building: dtc-1.6.1-x86_64-pc-cygwin-1
sizes: dtc-1.6.1-x86_64-pc-cygwin-1: 4.667MB (installed: 1.469MB)
cleaning: dtc-1.6.1-x86_64-pc-cygwin-1
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-pc-cygwin-1.txt
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-pc-cygwin-1.xml
config: devel/expat-2.5.0-1.cfg
package: expat-2.5.0-x86_64-pc-cygwin-1
building: expat-2.5.0-x86_64-pc-cygwin-1
sizes: expat-2.5.0-x86_64-pc-cygwin-1: 10.085MB (installed: 1.469MB)
cleaning: expat-2.5.0-x86_64-pc-cygwin-1
reporting: devel/expat-2.5.0-1.cfg -> expat-2.5.0-x86_64-pc-cygwin-1.txt
reporting: devel/expat-2.5.0-1.cfg -> expat-2.5.0-x86_64-pc-cygwin-1.xml
config: devel/gmp-6.2.1.cfg
package: gmp-6.2.1-x86_64-pc-cygwin-1
building: gmp-6.2.1-x86_64-pc-cygwin-1
sizes: gmp-6.2.1-x86_64-pc-cygwin-1: 34.089MB (installed: 4.213MB)
cleaning: gmp-6.2.1-x86_64-pc-cygwin-1
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-pc-cygwin-1.txt
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-pc-cygwin-1.xml
Build Set: textproc/gsed-internal.bset
config: textproc/gsed.cfg
Build Set: Time 0:00:00.053264
Build Set: print/texinfo-internal.bset
config: print/texinfo.cfg
Build Set: Time 0:00:00.375395
config: tools/rtems-gdb-13.2.cfg
package: powerpc-rtems6-gdb-13.2-x86_64-pc-cygwin-1
building: powerpc-rtems6-gdb-13.2-x86_64-pc-cygwin-1
sizes: powerpc-rtems6-gdb-13.2-x86_64-pc-cygwin-1: 1.097GB (installed: 279.966MB)
cleaning: powerpc-rtems6-gdb-13.2-x86_64-pc-cygwin-1
reporting: tools/rtems-gdb-13.2.cfg -> powerpc-rtems6-gdb-13.2-x86_64-pc-cygwin-1.txt
reporting: tools/rtems-gdb-13.2.cfg -> powerpc-rtems6-gdb-13.2-x86_64-pc-cygwin-1.xml
config: tools/rtems-binutils-2.39.cfg
package: powerpc-rtems6-binutils-2.39-x86_64-pc-cygwin-1
building: powerpc-rtems6-binutils-2.39-x86_64-pc-cygwin-1
sizes: powerpc-rtems6-binutils-2.39-x86_64-pc-cygwin-1: 757.072MB (installed: 266.805MB)
cleaning: powerpc-rtems6-binutils-2.39-x86_64-pc-cygwin-1
reporting: tools/rtems-binutils-2.39.cfg -> powerpc-rtems6-binutils-2.39-x86_64-pc-cygwin-1.txt
reporting: tools/rtems-binutils-2.39.cfg -> powerpc-rtems6-binutils-2.39-x86_64-pc-cygwin-1.xml
config: tools/rtems-gcc-12-newlib-head.cfg
package: powerpc-rtems6-gcc-506cb58-newlib-a021448-x86_64-pc-cygwin-1
building: powerpc-rtems6-gcc-506cb58-newlib-a021448-x86_64-pc-cygwin-1
error: building powerpc-rtems6-gcc-506cb58-newlib-a021448-x86_64-pc-cygwin-1
Build FAILED
See error report: rsb-report-powerpc-rtems6-gcc-506cb58-newlib-a021448-x86_64-pc-cygwin-1.txt
Note: In some cases the error appears only in
the complete build log (see --log option)
error: building powerpc-rtems6-gcc-506cb58-newlib-a021448-x86_64-pc-cygwin-1
config: tools/rtems-tools-6.cfg
package: rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d-1
building: rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d-1
sizes: rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d-1: 249.058MB (installed: 82.436MB)
cleaning: rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d-1.xml
cleaning: dtc-1.6.1-x86_64-pc-cygwin-1
cleaning: expat-2.5.0-x86_64-pc-cygwin-1
cleaning: gmp-6.2.1-x86_64-pc-cygwin-1
cleaning: powerpc-rtems6-gdb-13.2-x86_64-pc-cygwin-1
cleaning: powerpc-rtems6-binutils-2.39-x86_64-pc-cygwin-1
cleaning: rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d-1
Build Sizes: usage: 1.718GB total: 1.640GB (sources: 1.018GB, patches: 507.909KB, installed 636.358MB)
Build Set: Time 2:13:03.717586
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:03:36 2023
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-pc-cygwin-1
Config: devel/dtc-1.6.1-1.cfg
Summary:
Device Tree Compiler v1.6.1 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
https://www.devicetree.org/
Version:
1.6.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/4783/0001-checks.c-Ensure-argument-is-an-integer-v2.patch
sha256: dd83c10326188732ac26c1fd8dce70b796a7dde204b31c67cf4d04f29ed4dfef
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.6.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.6.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/rtems-tester/rtems-cron-6/tools/6 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.6.1
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/rtems-tester/rtems-cron-6/tools/6 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:03:36 2023
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-pc-cygwin-1
Config: devel/dtc-1.6.1-1.cfg
Summary:
Device Tree Compiler v1.6.1 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
https://www.devicetree.org/
Version:
1.6.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
Patches: 1
1: https://devel.rtems.org/raw-attachment/ticket/4783/0001-checks.c-Ensure-argument-is-an-integer-v2.patch
sha256: dd83c10326188732ac26c1fd8dce70b796a7dde204b31c67cf4d04f29ed4dfef
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.6.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.6.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/rtems-tester/rtems-cron-6/tools/6 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.6.1
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/rtems-tester/rtems-cron-6/tools/6 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:04:30 2023
==============================================================================
Report: devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.5.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.5.0-x86_64-pc-cygwin-1
Config: devel/expat-2.5.0-1.cfg
Summary:
Expat XML Parser v2.5.0 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
http://expat.sourceforge.net/
Version:
2.5.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_5_0/expat-2.5.0.tar.gz
sha512: 8f99pfr7R9zW4PDYkoJqum3nZQnISXvAA4LxEJq44qk9OWlD27UiFkVwRJk6Odc3KASK32UNjoPigYntx7eEAg==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.5.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.5.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.5.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:04:31 2023
==============================================================================
Report: devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.5.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.5.0-x86_64-pc-cygwin-1
Config: devel/expat-2.5.0-1.cfg
Summary:
Expat XML Parser v2.5.0 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
http://expat.sourceforge.net/
Version:
2.5.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_5_0/expat-2.5.0.tar.gz
sha512: 8f99pfr7R9zW4PDYkoJqum3nZQnISXvAA4LxEJq44qk9OWlD27UiFkVwRJk6Odc3KASK32UNjoPigYntx7eEAg==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.5.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.5.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.5.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:08:02 2023
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-pc-cygwin-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:08:03 2023
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-pc-cygwin-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:22:18 2023
==============================================================================
Report: tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-13.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems6-gdb-13.2-x86_64-pc-cygwin-1
Config: tools/rtems-gdb-13.2.cfg
Summary:
GDB v13.2 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
http://www.gnu.org/software/gdb/
Version:
13.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-13.2.tar.xz
sha512: gYXT4Rq2Da//WGClAWV3v+fddUfvAevIZ7wkdgPYK3T/dMTylJLH0q7lcHb1K+M+KJ9Ma0FKS4cNSzAEkJ9MNA==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-13.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems6" -o "x86_64-pc-cygwin" == "powerpc-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=powerpc-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --with-system-readline --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/bin/python3 --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:22:22 2023
==============================================================================
Report: tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-13.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems6-gdb-13.2-x86_64-pc-cygwin-1
Config: tools/rtems-gdb-13.2.cfg
Summary:
GDB v13.2 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
http://www.gnu.org/software/gdb/
Version:
13.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-13.2.tar.xz
sha512: gYXT4Rq2Da//WGClAWV3v+fddUfvAevIZ7wkdgPYK3T/dMTylJLH0q7lcHb1K+M+KJ9Ma0FKS4cNSzAEkJ9MNA==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-13.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems6" -o "x86_64-pc-cygwin" == "powerpc-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=powerpc-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --with-system-readline --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/bin/python3 --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:28:59 2023
==============================================================================
Report: tools/rtems-binutils-2.39.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.39.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.39.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems6-binutils-2.39-x86_64-pc-cygwin-1
Config: tools/rtems-binutils-2.39.cfg
Summary:
Binutils v2.39 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
http://sources.redhat.com/binutils
Version:
2.39
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.39.tar.bz2
sha512: +qWS3Uj8cVkBrXBKyW29NLF5LFHnfHqSo4eWSwcAcDx0vgfeRcxHUZRcjAZ0Noxz3Be7xWPR0s0jW169jG5++w==
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.39"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems6" -o "x86_64-pc-cygwin" == "powerpc-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=powerpc-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 8 all
cd ${build_top}
Install:
cd ${build_top}
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/locale
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-dlltool; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/powerpc-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-nlmconv; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/powerpc-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-windres; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/powerpc-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-windmc; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/powerpc-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 17:28:59 2023
==============================================================================
Report: tools/rtems-binutils-2.39.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.39.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.39.cfg
------------------------------------------------------------------------------
Package: powerpc-rtems6-binutils-2.39-x86_64-pc-cygwin-1
Config: tools/rtems-binutils-2.39.cfg
Summary:
Binutils v2.39 for target powerpc-rtems6 on host x86_64-pc-cygwin
URL:
http://sources.redhat.com/binutils
Version:
2.39
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.39.tar.bz2
sha512: +qWS3Uj8cVkBrXBKyW29NLF5LFHnfHqSo4eWSwcAcDx0vgfeRcxHUZRcjAZ0Noxz3Be7xWPR0s0jW169jG5++w==
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.39"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "powerpc-rtems6" -o "x86_64-pc-cygwin" == "powerpc-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=powerpc-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 8 all
cd ${build_top}
Install:
cd ${build_top}
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/locale
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-dlltool; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/powerpc-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-nlmconv; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/powerpc-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-windres; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/powerpc-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-windmc; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/powerpc-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 19:15:33 2023
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools eaf14a654b528b44de14f9da9919555e54324e0d for host x86_64-pc-cygwin
URL:
http://www.rtems.org/
Version:
eaf14a654b528b44de14f9da9919555e54324e0d
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d.tar.bz2
sha512: bcjVLITKdjQLKlalfUptMKLAmvDT0FidARukQHP4rK/8SWpYckPAc8BMMRhS3RX+Ga6NDuxD1Ss/bRlxG6qsdg==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
RT_HOST="--host=x86_64-pc-cygwin"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/rtems-tester/rtems-cron-6/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Jul 27 19:15:34 2023
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: fc4426c956c13b7e5af3c1eb0f17ef4c71ba8a81
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools eaf14a654b528b44de14f9da9919555e54324e0d for host x86_64-pc-cygwin
URL:
http://www.rtems.org/
Version:
eaf14a654b528b44de14f9da9919555e54324e0d
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d.tar.bz2
sha512: bcjVLITKdjQLKlalfUptMKLAmvDT0FidARukQHP4rK/8SWpYckPAc8BMMRhS3RX+Ga6NDuxD1Ss/bRlxG6qsdg==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-eaf14a654b528b44de14f9da9919555e54324e0d
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
RT_HOST="--host=x86_64-pc-cygwin"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/rtems-tester/rtems-cron-6/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list