[rtems-test] aarch64/xilinx_zynqmp_lp64_qemu: RTEMS_POSIX_API: Passed:616 Failed:3 Timeout:1 Test-Too-long:0 Invalid:0 Wrong:0

OAR Tester for CentOS 8 Stream rtems-tester at oarcorp.com
Tue May 30 19:41:40 UTC 2023


Testing time     : 0:16:19.792621
Average test time: 0:00:01.555226

Host
====
Linux-4.18.0-490.el8.x86_64-x86_64-with-centos-8 (Linux VM-CentOSStream8.rtems.com 4.18.0-490.el8.x86_64 #1 SMP Thu May 4 10:26:47 UTC 2023 x86_64 x86_64)

Configuration
=============
Version: 6.0.0.63415655e342dbcb9da76aae312ab135901bd2e1
Build  : RTEMS_POSIX_API
Tools  : 12.2.1 20230425 (RTEMS 6, RSB ceed4bd6995074bf74cadce637dad97aee284dd8, Newlib 9ae9eef)

Summary
=======

Passed:        616
Failed:          3
User Input:      6
Expected Fail:   0
Indeterminate:   1
Benchmark:       3
Timeout:         1
Test too long:   0
Invalid:         0
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
Wrong Header:    0
------------------
Total:         630

Failures:
 psxclock.exe
 dl06.exe
 dl05.exe
User Input:
 capture.exe
 fileio.exe
 top.exe
 monitor.exe
 termios.exe
 dl10.exe
Indeterminate:
 spcpucounter01.exe
Benchmark:
 dhrystone.exe
 linpack.exe
 whetstone.exe
Timeouts:
 ts-validation-intr.exe
Log
===

RTEMS Testing - Tester, 6.0.not_released
 Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=xilinx_zynqmp_lp64_qemu --log=run-xilinx_zynqmp_lp64_qemu.log --use-gitconfig --mail b-xilinx_zynqmp_lp64_qemu
 Host: Linux VM-CentOSStream8.rtems.com 4.18.0-490.el8.x86_64 #1 SMP Thu May 4 10:26:47 UTC 2023 x86_64
 Python: 2.7.18 (default, Mar  7 2023, 16:18:21) [GCC 8.5.0 20210514 (Red Hat 8.5.0-18)]
Host: Linux-4.18.0-490.el8.x86_64-x86_64-with-centos-8 (Linux VM-CentOSStream8.rtems.com 4.18.0-490.el8.x86_64 #1 SMP Thu May 4 10:26:47 UTC 2023 x86_64 x86_64)
[  1/630] p:0   f:0   u:0   e:0   I:0   B:0   t:0   L:0   i:0   W:0   | aarch64/xilinx_zynqmp_lp64_qemu: dhrystone.exe
 <<skipping passes>>
[ 95/630] p:85  f:0   u:0   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | aarch64/xilinx_zynqmp_lp64_qemu: dl05.exe
Result: failed    
Time: 0:00:00.251787 dl05.exe
=>  exe: qemu-system-aarch64 -no-reboot -nographic -serial mon:stdio -machine xlnx-zcu102 -m 4096 -kernel b-xilinx_zynqmp_lp64_qemu/aarch64/xilinx_zynqmp_lp64_qemu/testsuites/libtests/dl05.exe
] 
] 
=>  test start: libdl (RTL) 5
] *** BEGIN OF TEST libdl (RTL) 5 ***
] *** TEST VERSION: 6.0.0.63415655e342dbcb9da76aae312ab135901bd2e1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 12.2.1 20230425 (RTEMS 6, RSB ceed4bd6995074bf74cadce637dad97aee284dd8, Newlib 9ae9eef)
] exception_base: begin
] exception_base: caught: eb: throw std::runtime_error
] exception_base: end
] exception_dl: begin
] exception_dl: throwing...
] terminate called after throwing an instance of 'std::runtime_error'
]   what():  throw std::runtime_error object
] 
] *** EXIT STATUS NOT ZERO ***
] exit source: 5 (RTEMS_FATAL_SOURCE_EXIT)
] exit code: 1 (0x00000001)
] RTEMS version: 6.0.0.63415655e342dbcb9da76aae312ab135901bd2e1
] RTEMS tools: 12.2.1 20230425 (RTEMS 6, RSB ceed4bd6995074bf74cadce637dad97aee284dd8, Newlib 9ae9eef)
] executing thread ID: 0x0a010001
] executing thread name: UI1 
[ 96/630] p:85  f:0   u:0   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | aarch64/xilinx_zynqmp_lp64_qemu: dl06.exe
Result: failed    
Time: 0:00:00.251621 dl06.exe
=>  exe: qemu-system-aarch64 -no-reboot -nographic -serial mon:stdio -machine xlnx-zcu102 -m 4096 -kernel b-xilinx_zynqmp_lp64_qemu/aarch64/xilinx_zynqmp_lp64_qemu/testsuites/libtests/dl06.exe
] 
] 
=>  test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.63415655e342dbcb9da76aae312ab135901bd2e1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 12.2.1 20230425 (RTEMS 6, RSB ceed4bd6995074bf74cadce637dad97aee284dd8, Newlib 9ae9eef)
] 
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
] 
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.63415655e342dbcb9da76aae312ab135901bd2e1
] RTEMS tools: 12.2.1 20230425 (RTEMS 6, RSB ceed4bd6995074bf74cadce637dad97aee284dd8, Newlib 9ae9eef)
] executing thread ID: 0x0a010001
] executing thread name: UI1 
[ 97/630] p:87  f:2   u:0   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | aarch64/xilinx_zynqmp_lp64_qemu: dl07.exe
 <<skipping passes>>
[193/630] p:177 f:2   u:4   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | aarch64/xilinx_zynqmp_lp64_qemu: psxclock.exe
Result: failed    
Time: 0:00:08.773387 psxclock.exe
=>  exe: qemu-system-aarch64 -no-reboot -nographic -serial mon:stdio -machine xlnx-zcu102 -m 4096 -kernel b-xilinx_zynqmp_lp64_qemu/aarch64/xilinx_zynqmp_lp64_qemu/testsuites/psxtests/psxclock.exe
] 
] 
=>  test start: PSXCLOCK
] *** BEGIN OF TEST PSXCLOCK ***
] *** TEST VERSION: 6.0.0.63415655e342dbcb9da76aae312ab135901bd2e1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 12.2.1 20230425 (RTEMS 6, RSB ceed4bd6995074bf74cadce637dad97aee284dd8, Newlib 9ae9eef)
] Init: clock_gettime - EINVAL (NULL timespec)
] Init: clock_gettime - EINVAL (invalid clockid)
] Init: clock_settime - EINVAL (invalid clockid)
] Thu Jan  1 00:00:01 1970
] Init: clock_settime - before 1988 EINVAL
] Init: clock_settime - invalid nanoseconds EINVAL
] Init: clock_settime - 2400-01-01T00:00:00.999999999Z SUCCESSFUL
] Init: clock_settime - 2400-01-01T00:00:01Z EINVAL
] Init: clock_settime - far future EINVAL
] Init: clock_getres - EINVAL (invalid clockid)
] Init: clock_getres - EINVAL (NULL resolution)
] Init: clock_getres - SUCCESSFUL
] Init: resolution = sec (0), nsec (10000000)
] 
] Fri May 24 11:05:00 1996
] Init: clock_settime - SUCCESSFUL
] Fri May 24 11:05:00 1996
] Fri May 24 11:05:00 1996
] Time since boot: (4, 12397839)
] Fri May 24 11:05:03 1996
] Fri May 24 11:05:03 1996
] Init: seconds remaining (0)
] 
] Init: nanosleep - EINVAL (NULL time)
] Init: nanosleep - EINVAL (too many nanoseconds)
] Init: nanosleep - negative seconds - EINVAL
] Init: nanosleep - negative nanoseconds - EINVAL
] Init: nanosleep - delay so small results in one tick
] Init: nanosleep - yield with remaining
] Init: nanosleep - yield with NULL time remaining
] Init: nanosleep - 1.05 seconds
] Fri May 24 11:05:06 1996
] Init: sec (0), nsec (0) remaining
] Init: nanosleep - 1.35 seconds
] Fri May 24 11:05:07 1996
] 
] clock_gettime - CLOCK_THREAD_CPUTIME_ID -- ENOSYS
] clock_settime - CLOCK_PROCESS_CPUTIME_ID -- ENOSYS
] clock_settime - CLOCK_THREAD_CPUTIME_ID -- ENOSYS
] 
] Clock settime while sleeping: step=0
] clock: nanosleep: sec=0 nsec=500000000 ticks=51 expected-ticks=51
] clock: clock_nanosleep(CLOCK_REALTIME): sec=0 nsec=500000000 ticks=51 expected-ticks=51
] clock: clock_nanosleep(CLOCK_MONOTONIC): sec=0 nsec=500000000 ticks=51 expected-ticks=51
] 
] Clock settime while sleeping: step=1
] clock: nanosleep: sec=0 nsec=500000000 ticks=51 expected-ticks=51
] clock: clock_nanosleep(CLOCK_REALTIME): sec=0 nsec=500000000 ticks=51 expected-ticks=51
] clock: clock_nanosleep(CLOCK_MONOTONIC): sec=0 nsec=500000000 ticks=51 expected-ticks=51
] 
] Clock settime while sleeping: step=-1
] clock: nanosleep: sec=0 nsec=500000000 ticks=50 expected-ticks=51
] ../../../testsuites/psxtests/psxclock/init.c: 120 ctx->ticks == ticks
] 
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.63415655e342dbcb9da76aae312ab135901bd2e1
] RTEMS tools: 12.2.1 20230425 (RTEMS 6, RSB ceed4bd6995074bf74cadce637dad97aee284dd8, Newlib 9ae9eef)
] executing thread ID: 0x0a010001
] executing thread name: UI1 
[194/630] p:177 f:2   u:4   e:0   I:0   B:3   t:0   L:0   i:0   W:0   | aarch64/xilinx_zynqmp_lp64_qemu: psxclock01.exe
 <<skipping passes>>
[621/630] p:601 f:3   u:6   e:0   I:1   B:3   t:0   L:0   i:0   W:0   | aarch64/xilinx_zynqmp_lp64_qemu: ts-validation-intr.exe
Result: timeout   
Time: 0:12:29.015228 ts-validation-intr.exe
=>  exe: qemu-system-aarch64 -no-reboot -nographic -serial mon:stdio -machine xlnx-zcu102 -m 4096 -kernel b-xilinx_zynqmp_lp64_qemu/aarch64/xilinx_zynqmp_lp64_qemu/testsuites/validation/ts-validation-intr.exe
] 
] 
=>  test start: TestsuitesValidationIntr
] *** BEGIN OF TEST TestsuitesValidationIntr ***
] *** TEST VERSION: 6.0.0.63415655e342dbcb9da76aae312ab135901bd2e1
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 12.2.1 20230425 (RTEMS 6, RSB ceed4bd6995074bf74cadce637dad97aee284dd8, Newlib 9ae9eef)
] A:TestsuitesValidationIntr
] S:Platform:RTEMS
] S:Compiler:12.2.1 20230425 (RTEMS 6, RSB ceed4bd6995074bf74cadce637dad97aee284dd8, Newlib 9ae9eef)
] S:Version:6.0.0.63415655e342dbcb9da76aae312ab135901bd2e1
] S:BSP:xilinx_zynqmp_lp64_qemu
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:huGRj7kHeBWgSJolmeboNSyCgeX2U62J9RiNQ18YPFc=
] S:RTEMS_DEBUG:0
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:RtemsIntrReqVectorIsEnabled
] E:RtemsIntrReqVectorIsEnabled:N:958:F:0:D:0.001410
] B:RtemsIntrReqVectorEnable
] E:RtemsIntrReqVectorEnable:N:12834:F:0:D:0.011252
] B:RtemsIntrReqVectorDisable
] E:RtemsIntrReqVectorDisable:N:12858:F:0:D:0.010105
] B:RtemsIntrReqSetAffinity
] E:RtemsIntrReqSetAffinity:N:4060:F:0:D:0.001750
] B:RtemsIntrReqRaiseOn
] *** TIMEOUT TIMEOUT
[622/630] p:601 f:3   u:6   e:0   I:1   B:3   t:0   L:0   i:0   W:0   | aarch64/xilinx_zynqmp_lp64_qemu: ts-validation-io-kernel.exe
 <<skipping passes>>
[630/630] p:610 f:3   u:6   e:0   I:1   B:3   t:0   L:0   i:0   W:0   | aarch64/xilinx_zynqmp_lp64_qemu: ts-validation-tls-1.exe

Passed:        616
Failed:          3
User Input:      6
Expected Fail:   0
Indeterminate:   1
Benchmark:       3
Timeout:         1
Test too long:   0
Invalid:         0
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
Wrong Header:    0
------------------
Total:         630
Failures:
 psxclock.exe
 dl06.exe
 dl05.exe
User Input:
 capture.exe
 fileio.exe
 top.exe
 monitor.exe
 termios.exe
 dl10.exe
Indeterminate:
 spcpucounter01.exe
Benchmark:
 dhrystone.exe
 linpack.exe
 whetstone.exe
Timeouts:
 ts-validation-intr.exe
Average test time: 0:00:01.555226
Testing time     : 0:16:19.792621


More information about the build mailing list