Build CYGWIN_NT-10.0-19045: FAILED 6/rtems-microblaze on x86_64-pc-cygwin (microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1)
OAR Tester for Windows10 Cygwin
rtems-tester at oarcorp.com
Thu Sep 7 16:58:15 UTC 2023
RTEMS Source Builder - Set Builder, 6 (35c73203df1e)
Host: CYGWIN_NT-10.0-19045-3.4.7-1.x86_64-x86_64-64bit-WindowsPE
CYGWIN_NT-10.0-19045 VM-Windows10 3.4.7-1.x86_64 2023-06-16 14:04 UTC
x86_64
Build Time: 0:37:15.318880
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Build FAILED: microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
checking for fprintf_unlocked... no
checking for fputc_unlocked... yes
checking for fputs_unlocked... yes
checking for fread_unlocked... yes
checking for fwrite_unlocked... yes
checking for getchar_unlocked... yes
checking for getc_unlocked... yes
checking for putchar_unlocked... yes
checking for putc_unlocked... yes
checking for madvise... yes
checking for mallinfo... yes
checking whether mbstowcs works... yes
checking for ssize_t... yes
checking for caddr_t... yes
checking for sys/mman.h... (cached) yes
checking for mmap... (cached) yes
checking whether read-only mmap of a plain file works... yes
checking whether mmap from /dev/zero works... no
checking for MAP_ANON(YMOUS)... yes
checking whether mmap with MAP_ANON(YMOUS) works... no
checking for pid_t... yes
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for ld used by GCC... ld
checking if the linker (ld) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... no, consider installing GNU libiconv
checking for LC_MESSAGES... yes
checking for nl_langinfo and CODESET... yes
checking whether basename is declared... yes
checking whether strstr is declared... yes
checking whether getenv is declared... yes
checking whether atol is declared... yes
checking whether atoll is declared... yes
checking whether asprintf is declared... yes
checking whether sbrk is declared... yes
checking whether abort is declared... yes
checking whether atof is declared... yes
checking whether getcwd is declared... yes
checking whether getwd is declared... yes
checking whether madvise is declared... yes
checking whether stpcpy is declared... yes
checking whether strnlen is declared... yes
checking whether strsignal is declared... yes
checking whether strverscmp is declared... yes
checking whether strtol is declared... yes
checking whether strtoul is declared... yes
checking whether strtoll is declared... yes
checking whether strtoull is declared... yes
checking whether setenv is declared... yes
checking whether unsetenv is declared... yes
checking whether errno is declared... yes
checking whether snprintf is declared... yes
checking whether vsnprintf is declared... yes
checking whether vasprintf is declared... yes
checking whether malloc is declared... yes
checking whether realloc is declared... yes
checking whether calloc is declared... yes
checking whether free is declared... yes
checking whether getopt is declared... no
checking whether clock is declared... yes
checking whether getpagesize is declared... yes
checking whether ffs is declared... yes
checking whether clearerr_unlocked is declared... yes
checking whether feof_unlocked is declared... yes
checking whether ferror_unlocked is declared... yes
checking whether fflush_unlocked is declared... yes
checking whether fgetc_unlocked is declared... yes
checking whether fgets_unlocked is declared... yes
checking whether fileno_unlocked is declared... yes
checking whether fprintf_unlocked is declared... no
checking whether fputc_unlocked is declared... yes
checking whether fputs_unlocked is declared... yes
checking whether fread_unlocked is declared... yes
checking whether fwrite_unlocked is declared... yes
checking whether getchar_unlocked is declared... yes
checking whether getc_unlocked is declared... yes
checking whether putchar_unlocked is declared... yes
checking whether putc_unlocked is declared... yes
checking whether getrlimit is declared... yes
checking whether setrlimit is declared... yes
checking whether getrusage is declared... yes
checking whether mallinfo is declared... yes
checking whether ldgetname is declared... no
checking whether times is declared... yes
checking whether sigaltstack is declared... yes
checking for struct tms... yes
checking for clock_t... yes
checking for F_SETLKW... yes
checking for O_CLOEXEC... yes
checking for AF_UNIX... yes
checking for AF_INET6... yes
checking for _LK_LOCK... no
checking if mkdir takes one argument... no
Using `../../gnu-mirror-gcc-d04fe55/gcc/config/microblaze/microblaze.c' for machine-specific logic.
Using `../../gnu-mirror-gcc-d04fe55/gcc/config/microblaze/microblaze.md' as machine description file.
Using the following target machine macro files:
../../gnu-mirror-gcc-d04fe55/gcc/config/microblaze/microblaze.h
../../gnu-mirror-gcc-d04fe55/gcc/config/dbxelf.h
../../gnu-mirror-gcc-d04fe55/gcc/config/microblaze/rtems.h
../../gnu-mirror-gcc-d04fe55/gcc/config/rtems.h
../../gnu-mirror-gcc-d04fe55/gcc/config/newlib-stdint.h
../../gnu-mirror-gcc-d04fe55/gcc/config/initfini-array.h
Using `../../gnu-mirror-gcc-d04fe55/gcc/config/ i386/xm-cygwin.h' as host machine macro file.
Using host-cygwin.o for host machine hooks.
checking whether NLS is requested... no
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include... ld
checking if the linker (ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... nm
checking the name lister (nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 8192
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for ld option to reload object files... -r
checking for x86_64-pc-cygwin-objdump... objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-pc-cygwin-ar... (cached) ar
checking for x86_64-pc-cygwin-strip... no
checking for strip... strip
checking for x86_64-pc-cygwin-ranlib... (cached) ranlib
checking command to parse nm output from gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include object... ok
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -fno-rtti -fno-exceptions... no
checking for gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include option to produce PIC... -DDLL_EXPORT -DPIC
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include PIC flag -DDLL_EXPORT -DPIC works... yes
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include static flag -static works... yes
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -c -o file.o... yes
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -c -o file.o... (cached) yes
checking whether the gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include linker (ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include -E
checking for ld used by g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include... ld
checking if the linker (ld) is GNU ld... yes
checking whether the g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include linker (ld) supports shared libraries... yes
checking for g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include option to produce PIC... -DDLL_EXPORT -DPIC
checking if g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include PIC flag -DDLL_EXPORT -DPIC works... yes
checking if g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include static flag -static works... yes
checking if g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -c -o file.o... yes
checking if g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -c -o file.o... (cached) yes
checking whether the g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include linker (ld) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking for microblaze-rtems6-as... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-as
checking what assembler to use... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-as
checking for microblaze-rtems6-ld... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-ld
checking whether we are using gold... no
checking gold linker with split stack support as non default...
checking what linker to use... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-ld
checking for microblaze-rtems6-nm... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-nm
checking what nm to use... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-nm
checking for microblaze-rtems6-objdump... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-objdump
checking what objdump to use... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-objdump
checking for microblaze-rtems6-readelf... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-readelf
checking what readelf to use... /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-readelf
checking for microblaze-rtems6-otool... no
checking what otool to use... not found
checking for microblaze-rtems6-dsymutil... no
checking assembler flags...
checking assembler for .balign and .p2align... yes
checking assembler for .p2align with maximum skip... yes
checking assembler for .literal16... no
checking assembler for working .subsection -1... yes
checking assembler for .weak... yes
checking assembler for .weakref... yes
checking assembler for .nsubspa comdat... no
checking assembler for .hidden... yes
checking linker for .hidden support... yes
checking linker read-only and read-write section mixing... unknown
checking for .preinit_array/.init_array/.fini_array support... checking cross compile... guessing... no
checking assembler for .sleb128 and .uleb128... yes
checking assembler for cfi directives... no
checking assembler for cfi personality directive... no
checking assembler for cfi sections directive... no
checking assembler for eh_frame optimization... yes
checking assembler for section exclude flag... yes
checking assembler for section merging support... yes
checking assembler for stabs directive... yes
checking assembler for COMDAT group support (GNU as)... yes
checking assembler for line table is_stmt support... yes
checking assembler for line table discriminator support... yes
checking assembler for thread-local storage support... yes
checking linker -Bstatic/-Bdynamic option... yes
checking linker --version-script option... yes
checking linker soname option... yes
checking linker --demangle support... yes
checking linker plugin support... 2
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for dwarf2 debug_view support... yes
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for compressed debug sections... 2
checking assembler for .lcomm with alignment... yes
checking for target glibc version... 0.0
checking assembler for gnu_unique_object... yes
checking assembler for tolerance to line number 0... yes
checking support for thin archives... yes
checking linker PT_GNU_EH_FRAME support... no
checking linker CIEv3 in .eh_frame support... yes
checking linker position independent executable support... yes
checking linker PIE support with copy reloc... no
checking linker EH-compatible garbage collection of sections... no
checking linker EH garbage collection of sections bug... yes
checking linker for compressed debug sections... 3
checking linker --as-needed support... yes
checking linker mapfile support for clearing hardware capabilities... no
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... no
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether to avoid linking multiple front-ends at once... no
Links are now set up to build a cross-compiler
from x86_64-pc-cygwin to microblaze-xilinx-rtems6.
gcc_driver_version: 10.5.0
checking for -fno-PIE option... yes
checking for -no-pie option... yes
checking linker -z bndplt option... no
checking linker --push-state/--pop-state options... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating dsymutil
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing depdir commands
mkdir -p -- .deps
config.status: executing gccdepdir commands
mkdir -p -- build/.deps
mkdir -p -- ada/.deps
mkdir -p -- brig/.deps
mkdir -p -- c/.deps
mkdir -p -- cp/.deps
mkdir -p -- d/.deps
mkdir -p -- fortran/.deps
mkdir -p -- go/.deps
mkdir -p -- jit/.deps
mkdir -p -- lto/.deps
mkdir -p -- objc/.deps
mkdir -p -- objcp/.deps
mkdir -p -- c-family/.deps
mkdir -p -- common/.deps
mkdir -p -- analyzer/.deps
config.status: executing default commands
mkdir -p -- ./libcc1
Configuring in ./libcc1
make[2]: Entering directory '/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h config/i386/xm-cygwin.h" DEFINES="" \
/bin/sh ../../gnu-mirror-gcc-d04fe55/gcc/mkconfig.sh config.h
TARGET_CPU_DEFAULT="" \
HEADERS="options.h insn-constants.h config/microblaze/microblaze.h config/dbxelf.h config/microblaze/rtems.h config/rtems.h config/newlib-stdint.h config/initfini-array.h defaults.h" DEFINES="LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4 TARGET_BIG_ENDIAN_DEFAULT=4321" \
/bin/sh ../../gnu-mirror-gcc-d04fe55/gcc/mkconfig.sh tm.h
TARGET_CPU_DEFAULT="" \
HEADERS="config/microblaze/microblaze-protos.h tm-preds.h" DEFINES="" \
/bin/sh ../../gnu-mirror-gcc-d04fe55/gcc/mkconfig.sh tm_p.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h config/i386/xm-cygwin.h" DEFINES="" \
/bin/sh ../../gnu-mirror-gcc-d04fe55/gcc/mkconfig.sh bconfig.h
flex -ogengtype-lex.c ../../gnu-mirror-gcc-d04fe55/gcc/gengtype-lex.l && { \
make[2]: *** Waiting for unfinished jobs....
echo '#ifdef HOST_GENERATOR_FILE' > gengtype-lex.c.tmp; \
configure: creating cache ./config.cache
checking build system type... x86_64-pc-cygwin
checking host system type... x86_64-pc-cygwin
make[1]: *** [Makefile:4417: all-gcc] Error 141
make[1]: *** Waiting for unfinished jobs....
checking target system type... microblaze-xilinx-rtems6
checking for x86_64-pc-cygwin-gcc... gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include accepts -g... yes
checking for gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include option to accept ISO C89... none needed
checking whether gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include understands -c and -o together... yes
checking how to run the C preprocessor... gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking whether make supports nested variables... yes
checking dependency style of gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include... gcc3
checking whether to enable maintainer-specific portions of Makefiles... no
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include... ld
checking if the linker (ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... nm
checking the name lister (nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 8192
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for ld option to reload object files... -r
checking for x86_64-pc-cygwin-objdump... objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-pc-cygwin-ar... ar
checking for x86_64-pc-cygwin-strip... no
checking for strip... strip
checking for x86_64-pc-cygwin-ranlib... ranlib
checking command to parse nm output from gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include object... ok
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -fno-rtti -fno-exceptions... no
checking for gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include option to produce PIC... -DDLL_EXPORT -DPIC
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include PIC flag -DDLL_EXPORT -DPIC works... yes
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include static flag -static works... yes
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -c -o file.o... yes
checking if gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -c -o file.o... (cached) yes
checking whether the gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include linker (ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether we are using the GNU C++ compiler... yes
checking whether g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include accepts -g... yes
checking dependency style of g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include... gcc3
checking how to run the C++ preprocessor... g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include -E
checking for ld used by g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include... ld
checking if the linker (ld) is GNU ld... yes
checking whether the g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include linker (ld) supports shared libraries... yes
checking for g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include option to produce PIC... -DDLL_EXPORT -DPIC
checking if g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include PIC flag -DDLL_EXPORT -DPIC works... yes
checking if g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include static flag -static works... yes
checking if g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -c -o file.o... yes
checking if g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -c -o file.o... (cached) yes
checking whether the g++ -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include linker (ld) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether basename is declared... yes
checking whether gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -W... yes
checking whether gcc -O2 -g -pipe -I/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-197609/6/rtems-microblaze/home/rtems-tester/rtems-cron-6/tools/6/include supports -Wall... yes
checking for socket libraries... checking for connect... yes
checking for gethostbyname... yes
checking for socketpair... yes
checking for select... yes
checking for fork... yes
configure: updating cache ./config.cache
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating cc1plugin-config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Leaving directory '/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1/build'
make: *** [Makefile:979: all] Error 2
make: INTERNAL: Exiting with 4 jobserver tokens available; should be 8!
make: Leaving directory '/home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1/build'
shell cmd failed: sh -ex /home/rtems-tester/rtems-cron-6/rtems-source-builder/rtems/build/microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1/do-build
error: building microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1
See error report: rsb-report-microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1.txt
Note: In some cases the error appears only in
the complete build log (see --log option)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sizes
=====
Maximum build usage: 1.570GB
Total size: 1.560GB
Installed : 548.903MB
Sources: 1.024GB
Patches: 507.909KB
Output
======
Build Set: 6/rtems-microblaze
config: devel/expat-2.5.0-1.cfg
package: expat-2.5.0-x86_64-pc-cygwin-1
building: expat-2.5.0-x86_64-pc-cygwin-1
sizes: expat-2.5.0-x86_64-pc-cygwin-1: 10.084MB (installed: 1.469MB)
cleaning: expat-2.5.0-x86_64-pc-cygwin-1
reporting: devel/expat-2.5.0-1.cfg -> expat-2.5.0-x86_64-pc-cygwin-1.txt
reporting: devel/expat-2.5.0-1.cfg -> expat-2.5.0-x86_64-pc-cygwin-1.xml
config: devel/gmp-6.2.1.cfg
package: gmp-6.2.1-x86_64-pc-cygwin-1
building: gmp-6.2.1-x86_64-pc-cygwin-1
sizes: gmp-6.2.1-x86_64-pc-cygwin-1: 34.085MB (installed: 4.213MB)
cleaning: gmp-6.2.1-x86_64-pc-cygwin-1
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-pc-cygwin-1.txt
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-pc-cygwin-1.xml
config: tools/rtems-gdb-13.2.cfg
package: microblaze-rtems6-gdb-13.2-x86_64-pc-cygwin-1
building: microblaze-rtems6-gdb-13.2-x86_64-pc-cygwin-1
sizes: microblaze-rtems6-gdb-13.2-x86_64-pc-cygwin-1: 1.034GB (installed: 261.052MB)
cleaning: microblaze-rtems6-gdb-13.2-x86_64-pc-cygwin-1
reporting: tools/rtems-gdb-13.2.cfg -> microblaze-rtems6-gdb-13.2-x86_64-pc-cygwin-1.txt
reporting: tools/rtems-gdb-13.2.cfg -> microblaze-rtems6-gdb-13.2-x86_64-pc-cygwin-1.xml
config: tools/rtems-xilinx-binutils-2.36.cfg
package: microblaze-rtems6-binutils-7af075d-x86_64-pc-cygwin-1
building: microblaze-rtems6-binutils-7af075d-x86_64-pc-cygwin-1
sizes: microblaze-rtems6-binutils-7af075d-x86_64-pc-cygwin-1: 719.280MB (installed: 199.714MB)
cleaning: microblaze-rtems6-binutils-7af075d-x86_64-pc-cygwin-1
reporting: tools/rtems-xilinx-binutils-2.36.cfg -> microblaze-rtems6-binutils-7af075d-x86_64-pc-cygwin-1.txt
reporting: tools/rtems-xilinx-binutils-2.36.cfg -> microblaze-rtems6-binutils-7af075d-x86_64-pc-cygwin-1.xml
config: tools/rtems-xilinx-gcc-10-newlib-head.cfg
package: microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1
warning: 0001-gcc-config-aarch64-rtems.h-Define--USE-INIT-FINI-.patch: no hash found
warning: 0001-microblaze-Define--ELF--for-RTEMS-target.patch: no hash found
building: microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1
error: building microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1
Build FAILED
See error report: rsb-report-microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1.txt
Note: In some cases the error appears only in
the complete build log (see --log option)
error: building microblaze-rtems6-gcc-d04fe55-newlib-a021448-x86_64-pc-cygwin-1
config: tools/rtems-tools-6.cfg
package: rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5-1
building: rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5-1
sizes: rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5-1: 249.119MB (installed: 82.455MB)
cleaning: rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5-1.xml
cleaning: expat-2.5.0-x86_64-pc-cygwin-1
cleaning: gmp-6.2.1-x86_64-pc-cygwin-1
cleaning: microblaze-rtems6-gdb-13.2-x86_64-pc-cygwin-1
cleaning: microblaze-rtems6-binutils-7af075d-x86_64-pc-cygwin-1
cleaning: rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5-1
Build Sizes: usage: 1.570GB total: 1.560GB (sources: 1.024GB, patches: 507.909KB, installed 548.903MB)
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:21:55 2023
==============================================================================
Report: devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.5.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.5.0-x86_64-pc-cygwin-1
Config: devel/expat-2.5.0-1.cfg
Summary:
Expat XML Parser v2.5.0 for target microblaze-rtems6 on host x86_64-pc-cygwin
URL:
http://expat.sourceforge.net/
Version:
2.5.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_5_0/expat-2.5.0.tar.gz
sha512: 8f99pfr7R9zW4PDYkoJqum3nZQnISXvAA4LxEJq44qk9OWlD27UiFkVwRJk6Odc3KASK32UNjoPigYntx7eEAg==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.5.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.5.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.5.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:21:55 2023
==============================================================================
Report: devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.5.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.5.0-x86_64-pc-cygwin-1
Config: devel/expat-2.5.0-1.cfg
Summary:
Expat XML Parser v2.5.0 for target microblaze-rtems6 on host x86_64-pc-cygwin
URL:
http://expat.sourceforge.net/
Version:
2.5.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_5_0/expat-2.5.0.tar.gz
sha512: 8f99pfr7R9zW4PDYkoJqum3nZQnISXvAA4LxEJq44qk9OWlD27UiFkVwRJk6Odc3KASK32UNjoPigYntx7eEAg==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.5.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.5.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.5.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:25:09 2023
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-pc-cygwin-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target microblaze-rtems6 on host x86_64-pc-cygwin
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:25:09 2023
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-pc-cygwin-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target microblaze-rtems6 on host x86_64-pc-cygwin
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: 8904334a3bcc5c896ececabc75cda9dec642e401fb5397c4992c4fabea5e962c9ce8bd44e8e4233c34e55c8010cc28db0545f5f750cbdbb5f00af538dc763be9
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:38:41 2023
==============================================================================
Report: tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-13.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-gdb-13.2-x86_64-pc-cygwin-1
Config: tools/rtems-gdb-13.2.cfg
Summary:
GDB v13.2 for target microblaze-rtems6 on host x86_64-pc-cygwin
URL:
http://www.gnu.org/software/gdb/
Version:
13.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-13.2.tar.xz
sha512: gYXT4Rq2Da//WGClAWV3v+fddUfvAevIZ7wkdgPYK3T/dMTylJLH0q7lcHb1K+M+KJ9Ma0FKS4cNSzAEkJ9MNA==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-13.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems6" -o "x86_64-pc-cygwin" == "microblaze-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=microblaze-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --with-system-readline --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/bin/python3 --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:38:44 2023
==============================================================================
Report: tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-13.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-gdb-13.2-x86_64-pc-cygwin-1
Config: tools/rtems-gdb-13.2.cfg
Summary:
GDB v13.2 for target microblaze-rtems6 on host x86_64-pc-cygwin
URL:
http://www.gnu.org/software/gdb/
Version:
13.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-13.2.tar.xz
sha512: gYXT4Rq2Da//WGClAWV3v+fddUfvAevIZ7wkdgPYK3T/dMTylJLH0q7lcHb1K+M+KJ9Ma0FKS4cNSzAEkJ9MNA==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-13.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems6" -o "x86_64-pc-cygwin" == "microblaze-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=microblaze-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --with-system-readline --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/bin/python3 --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:45:14 2023
==============================================================================
Report: tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-xilinx-binutils-2.36.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-binutils-7af075d-x86_64-pc-cygwin-1
Config: tools/rtems-xilinx-binutils-2.36.cfg
Summary:
Binutils v7af075d for target microblaze-rtems6 on host x86_64-pc-cygwin
URL:
http://sources.redhat.com/binutils
Version:
7af075d
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-7af075d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7af075d
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-7af075d
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems6" -o "x86_64-pc-cygwin" == "microblaze-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=microblaze-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 8 all
cd ${build_top}
Install:
cd ${build_top}
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/locale
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-dlltool; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-nlmconv; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-windres; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-windmc; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:45:14 2023
==============================================================================
Report: tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-xilinx-binutils-2.36.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-binutils-7af075d-x86_64-pc-cygwin-1
Config: tools/rtems-xilinx-binutils-2.36.cfg
Summary:
Binutils v7af075d for target microblaze-rtems6 on host x86_64-pc-cygwin
URL:
http://sources.redhat.com/binutils
Version:
7af075d
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-7af075d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7af075d
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-7af075d
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems6" -o "x86_64-pc-cygwin" == "microblaze-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=microblaze-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 8 all
cd ${build_top}
Install:
cd ${build_top}
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/locale
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-dlltool; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-nlmconv; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-windres; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/bin/microblaze-rtems6-windmc; then
rm -f ${SB_BUILD_ROOT}/home/rtems-tester/rtems-cron-6/tools/6/share/man/man1/microblaze-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:57:44 2023
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools eda9325e583f761c53ee3db83124cc77cb4fefb5 for host x86_64-pc-cygwin
URL:
http://www.rtems.org/
Version:
eda9325e583f761c53ee3db83124cc77cb4fefb5
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5.tar.bz2
sha512: kdrwOv0iUKYjWud2g/9aSnduIniNWnQKry04zwKEiwlKdg1KnMhGu4b0mpQD2PnsYxGha/ksPEnHLPnahQTarg==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
RT_HOST="--host=x86_64-pc-cygwin"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/rtems-tester/rtems-cron-6/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 7 11:57:45 2023
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 35c73203df1e0bc7f0935cfb37ebc6581d8f1103
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools eda9325e583f761c53ee3db83124cc77cb4fefb5 for host x86_64-pc-cygwin
URL:
http://www.rtems.org/
Version:
eda9325e583f761c53ee3db83124cc77cb4fefb5
Release:
1
Sources: 1
1: https://git.rtems.org/rtems-tools/snapshot/rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5.tar.bz2
sha512: kdrwOv0iUKYjWud2g/9aSnduIniNWnQKry04zwKEiwlKdg1KnMhGu4b0mpQD2PnsYxGha/ksPEnHLPnahQTarg==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-eda9325e583f761c53ee3db83124cc77cb4fefb5
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
RT_HOST="--host=x86_64-pc-cygwin"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/rtems-tester/rtems-cron-6/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list