[rtems-test] powerpc/psim: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:632 Failed:7 Timeout:0 Test-Too-long:0 Invalid:0 Wrong:0
OAR Tester for CentOS 8 Stream
rtems-tester at oarcorp.com
Wed Aug 7 19:52:13 UTC 2024
Testing time : 0:03:10.382499
Average test time: 0:00:00.282886
Host
====
Linux-4.18.0-553.6.1.el8.x86_64-x86_64-with-glibc2.28 (Linux VM-CentOSStream8.rtems.com 4.18.0-553.6.1.el8.x86_64 #1 SMP Thu May 30 04:13:58 UTC 2024 x86_64 x86_64)
Configuration
=============
Version: 6.0.0.f29986391dbc9cda88ec0f90699a00857391ef7e
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB 077d200e1ca1d25bdae81118098a43f65bb5996f, Newlib 1339af4)
Summary
=======
Passed: 632
Failed: 7
User Input: 6
Expected Fail: 25
Indeterminate: 0
Benchmark: 3
Timeout: 0
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 673
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
minimum.exe
regulator01.exe
spfatal31.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamelongname.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamelongname.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux VM-CentOSStream8.rtems.com 4.18.0-553.6.1.el8.x86_64 #1 SMP Thu May 30 04:13:58 UTC 2024 x86_64
Python: 3.9.19 (main, May 16 2024, 11:40:09) [GCC 8.5.0 20210514 (Red Hat 8.5.0-22)]
Host: Linux-4.18.0-553.6.1.el8.x86_64-x86_64-with-glibc2.28 (Linux VM-CentOSStream8.rtems.com 4.18.0-553.6.1.el8.x86_64 #1 SMP Thu May 30 04:13:58 UTC 2024 x86_64 x86_64)
[ 1/673] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/673] p:6 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:06.336894 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.f29986391dbc9cda88ec0f90699a00857391ef7e
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 077d200e1ca1d25bdae81118098a43f65bb5996f, Newlib 1339af4)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.f29986391dbc9cda88ec0f90699a00857391ef7e
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 077d200e1ca1d25bdae81118098a43f65bb5996f, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 074]
[ 16/673] p:6 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[133/673] p:99 f:1 u:0 e:24 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:00.967479 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.f29986391dbc9cda88ec0f90699a00857391ef7e
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 077d200e1ca1d25bdae81118098a43f65bb5996f, Newlib 1339af4)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.f29986391dbc9cda88ec0f90699a00857391ef7e
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 077d200e1ca1d25bdae81118098a43f65bb5996f, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 074]
[134/673] p:98 f:1 u:0 e:24 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[216/673] p:175 f:3 u:4 e:24 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:01.008888 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.f29986391dbc9cda88ec0f90699a00857391ef7e
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 077d200e1ca1d25bdae81118098a43f65bb5996f, Newlib 1339af4)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.f29986391dbc9cda88ec0f90699a00857391ef7e
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 077d200e1ca1d25bdae81118098a43f65bb5996f, Newlib 1339af4)
] executing thread ID: 0x0b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 070]
[217/673] p:175 f:3 u:4 e:24 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[272/673] p:231 f:4 u:4 e:24 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:05.915423 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.f29986391dbc9cda88ec0f90699a00857391ef7e
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 077d200e1ca1d25bdae81118098a43f65bb5996f, Newlib 1339af4)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.f29986391dbc9cda88ec0f90699a00857391ef7e
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 077d200e1ca1d25bdae81118098a43f65bb5996f, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 074]
[273/673] p:231 f:4 u:4 e:24 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psxkey09.exe
<<skipping passes>>
[673/673] p:625 f:7 u:6 e:24 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: ts-validation-tls-1.exe
Passed: 632
Failed: 7
User Input: 6
Expected Fail: 25
Indeterminate: 0
Benchmark: 3
Timeout: 0
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 673
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
minimum.exe
regulator01.exe
spfatal31.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamelongname.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamelongname.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Average test time: 0:00:00.282886
Testing time : 0:03:10.382499
More information about the build
mailing list