Build CYGWIN_NT-10.0-19045: FAILED 6/rtems-mips on x86_64-pc-cygwin (mipstx39-rtems6-gdb-13.1-x86_64-pc-cygwin-1)
OAR Tester for Windows10 Cygwin
rtems-tester at oarcorp.com
Thu Aug 8 20:29:45 UTC 2024
RTEMS Source Builder - Set Builder, 6 (077d200e1ca1)
Host: CYGWIN_NT-10.0-19045-3.5.3-1.x86_64-x86_64-64bit-WindowsPE
CYGWIN_NT-10.0-19045 VM-Windows10 3.5.3-1.x86_64 2024-04-03 17:25 UTC
x86_64
Build Time: 0:56:33.278361
Output
======
Build Set: 6/rtems-mips
Build Set: tools/rtems-default-tools.bset
config: devel/dtc-1.6.1-1.cfg
package: dtc-1.6.1-x86_64-pc-cygwin-1
building: dtc-1.6.1-x86_64-pc-cygwin-1
sizes: dtc-1.6.1-x86_64-pc-cygwin-1: 4.693MB (installed: 1.481MB)
cleaning: dtc-1.6.1-x86_64-pc-cygwin-1
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-pc-cygwin-1.txt
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-pc-cygwin-1.xml
Build Set: devel/expat-internal.bset
config: devel/expat-2.5.0-1.cfg
package: expat-2.5.0-x86_64-pc-cygwin-1
building: expat-2.5.0-x86_64-pc-cygwin-1
sizes: expat-2.5.0-x86_64-pc-cygwin-1: 8.317MB (installed: 0.000B)
cleaning: expat-2.5.0-x86_64-pc-cygwin-1
cleaning: expat-2.5.0-x86_64-pc-cygwin-1
Build Set: Time 0:01:03.153788
Build Set: devel/gmp-internal.bset
config: devel/gmp-6.3.0.cfg
package: gmp-6.3.0-x86_64-pc-cygwin-1
building: gmp-6.3.0-x86_64-pc-cygwin-1
sizes: gmp-6.3.0-x86_64-pc-cygwin-1: 31.770MB (installed: 0.000B)
cleaning: gmp-6.3.0-x86_64-pc-cygwin-1
cleaning: gmp-6.3.0-x86_64-pc-cygwin-1
Build Set: Time 0:03:48.304520
Build Set: devel/mpfr-internal.bset
config: devel/mpfr-4.2.1.cfg
package: mpfr-4.2.1-x86_64-pc-cygwin-1
building: mpfr-4.2.1-x86_64-pc-cygwin-1
sizes: mpfr-4.2.1-x86_64-pc-cygwin-1: 17.478MB (installed: 0.000B)
cleaning: mpfr-4.2.1-x86_64-pc-cygwin-1
cleaning: mpfr-4.2.1-x86_64-pc-cygwin-1
Build Set: Time 0:02:24.873758
Build Set: textproc/gsed-internal.bset
config: textproc/gsed.cfg
Build Set: Time 0:00:00.096102
Build Set: print/texinfo-internal.bset
config: print/texinfo.cfg
Build Set: Time 0:00:00.448445
config: tools/rtems-gdb-14.2.cfg
package: mips-rtems6-gdb-14.2-x86_64-pc-cygwin-1
building: mips-rtems6-gdb-14.2-x86_64-pc-cygwin-1
sizes: mips-rtems6-gdb-14.2-x86_64-pc-cygwin-1: 1.044GB (installed: 260.138MB)
cleaning: mips-rtems6-gdb-14.2-x86_64-pc-cygwin-1
reporting: tools/rtems-gdb-14.2.cfg -> mips-rtems6-gdb-14.2-x86_64-pc-cygwin-1.txt
reporting: tools/rtems-gdb-14.2.cfg -> mips-rtems6-gdb-14.2-x86_64-pc-cygwin-1.xml
config: tools/rtems-binutils-2.43.cfg
package: mips-rtems6-binutils-2.43-x86_64-pc-cygwin-1
building: mips-rtems6-binutils-2.43-x86_64-pc-cygwin-1
error: building mips-rtems6-binutils-2.43-x86_64-pc-cygwin-1
Build FAILED
See error report: rsb-report-mips-rtems6-binutils-2.43-x86_64-pc-cygwin-1.txt
Note: In some cases the error appears only in
the complete build log (see --log option)
error: building mips-rtems6-binutils-2.43-x86_64-pc-cygwin-1
config: tools/rtems-gcc-13.3-newlib-head.cfg
package: mips-rtems6-gcc-13.3.0-newlib-1339af4-x86_64-pc-cygwin-1
building: mips-rtems6-gcc-13.3.0-newlib-1339af4-x86_64-pc-cygwin-1
error: building mips-rtems6-gcc-13.3.0-newlib-1339af4-x86_64-pc-cygwin-1
Build FAILED
See error report: rsb-report-mips-rtems6-gcc-13.3.0-newlib-1339af4-x86_64-pc-cygwin-1.txt
Note: In some cases the error appears only in
the complete build log (see --log option)
error: building mips-rtems6-gcc-13.3.0-newlib-1339af4-x86_64-pc-cygwin-1
config: tools/rtems-tools-6.cfg
package: rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15-1
building: rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15-1
sizes: rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15-1: 247.300MB (installed: 81.258MB)
cleaning: rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15-1.xml
cleaning: dtc-1.6.1-x86_64-pc-cygwin-1
cleaning: mips-rtems6-gdb-14.2-x86_64-pc-cygwin-1
cleaning: rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15-1
Build Sizes: usage: 1.378GB total: 731.315MB (sources: 388.134MB, patches: 311.347KB, installed 342.877MB)
Build Set: Time 0:49:18.325418
Build Set: tools/rtems-mipstx39-gdb.bset
config: devel/gmp-6.2.1.cfg
package: gmp-6.2.1-x86_64-pc-cygwin-1
building: gmp-6.2.1-x86_64-pc-cygwin-1
sizes: gmp-6.2.1-x86_64-pc-cygwin-1: 34.070MB (installed: 4.193MB)
cleaning: gmp-6.2.1-x86_64-pc-cygwin-1
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-pc-cygwin-1.txt
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-pc-cygwin-1.xml
config: tools/rtems-gdb-13.1.cfg
package: mipstx39-rtems6-gdb-13.1-x86_64-pc-cygwin-1
download: https://ftp.gnu.org/gnu/gdb/gdb-13.1.tar.xz -> sources/gdb-13.1.tar.xz
download: https://sourceware.org/bugzilla/attachment.cgi?id=14742 -> patches/gdb-13-freebsd-include.diff
building: mipstx39-rtems6-gdb-13.1-x86_64-pc-cygwin-1
error: building mipstx39-rtems6-gdb-13.1-x86_64-pc-cygwin-1
Build FAILED
See error report: rsb-report-mipstx39-rtems6-gdb-13.1-x86_64-pc-cygwin-1.txt
Note: In some cases the error appears only in
the complete build log (see --log option)
error: building mipstx39-rtems6-gdb-13.1-x86_64-pc-cygwin-1
cleaning: gmp-6.2.1-x86_64-pc-cygwin-1
Build Set: Time 0:07:14.908158
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 8 14:42:57 2024
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 077d200e1ca1d25bdae81118098a43f65bb5996f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-pc-cygwin-1
Config: devel/dtc-1.6.1-1.cfg
Summary:
Device Tree Compiler v1.6.1 for target mips-rtems6 on host x86_64-pc-cygwin
URL:
https://www.devicetree.org/
Version:
1.6.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
Patches: 1
1: https://gitlab.rtems.org/rtems/rtos/rtems/-/blob/main/assets/tracmigration/ticket_attachments/0001-checks.c-Ensure-argument-is-an-integer-v2.patch
sha256: dd83c10326188732ac26c1fd8dce70b796a7dde204b31c67cf4d04f29ed4dfef
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.6.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.6.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/rtems-tester/rtems-cron-6/tools/6 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.6.1
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/rtems-tester/rtems-cron-6/tools/6 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 8 14:42:57 2024
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 077d200e1ca1d25bdae81118098a43f65bb5996f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-pc-cygwin-1
Config: devel/dtc-1.6.1-1.cfg
Summary:
Device Tree Compiler v1.6.1 for target mips-rtems6 on host x86_64-pc-cygwin
URL:
https://www.devicetree.org/
Version:
1.6.1
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
Patches: 1
1: https://gitlab.rtems.org/rtems/rtos/rtems/-/blob/main/assets/tracmigration/ticket_attachments/0001-checks.c-Ensure-argument-is-an-integer-v2.patch
sha256: dd83c10326188732ac26c1fd8dce70b796a7dde204b31c67cf4d04f29ed4dfef
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.6.1
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.6.1
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/rtems-tester/rtems-cron-6/tools/6 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.6.1
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/rtems-tester/rtems-cron-6/tools/6 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 8 15:22:10 2024
==============================================================================
Report: tools/rtems-gdb-14.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 077d200e1ca1d25bdae81118098a43f65bb5996f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-14.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-14.2.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gdb-14.2-x86_64-pc-cygwin-1
Config: tools/rtems-gdb-14.2.cfg
Summary:
GDB v14.2 for target mips-rtems6 on host x86_64-pc-cygwin
URL:
http://www.gnu.org/software/gdb/
Version:
14.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-14.2.tar.xz
sha512: fgeUHx/mYSiMxXG0lkASzqvBdgYk/OIDINsvRwwBQ5sjhvhZtSiNoTIEt1ji47IqdMaMASF425O5UpsG8eIu3g==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-14.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mips-rtems6" -o "x86_64-pc-cygwin" == "mips-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=mips-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --with-system-readline --without-included-gettext --disable-win32-registry --disable-werror --disable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
make -j 8 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 8 15:22:13 2024
==============================================================================
Report: tools/rtems-gdb-14.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 077d200e1ca1d25bdae81118098a43f65bb5996f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-14.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-14.2.cfg
------------------------------------------------------------------------------
Package: mips-rtems6-gdb-14.2-x86_64-pc-cygwin-1
Config: tools/rtems-gdb-14.2.cfg
Summary:
GDB v14.2 for target mips-rtems6 on host x86_64-pc-cygwin
URL:
http://www.gnu.org/software/gdb/
Version:
14.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-14.2.tar.xz
sha512: fgeUHx/mYSiMxXG0lkASzqvBdgYk/OIDINsvRwwBQ5sjhvhZtSiNoTIEt1ji47IqdMaMASF425O5UpsG8eIu3g==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-14.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "mips-rtems6" -o "x86_64-pc-cygwin" == "mips-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --target=mips-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --with-system-readline --without-included-gettext --disable-win32-registry --disable-werror --disable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info
make -j 8 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
rm -rf $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/configure.info*
rm -f $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
touch $SB_BUILD_ROOT/home/rtems-tester/rtems-cron-6/tools/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 8 15:31:26 2024
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 077d200e1ca1d25bdae81118098a43f65bb5996f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools 0483fe3a4bc54e7e928d29c5658a42de4e80ed15 for host x86_64-pc-cygwin
URL:
http://www.rtems.org/
Version:
0483fe3a4bc54e7e928d29c5658a42de4e80ed15
Release:
1
Sources: 1
1: https://gitlab.rtems.org/rtems/tools/rtems-tools/-/archive/0483fe3a4bc54e7e928d29c5658a42de4e80ed15/rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15.tar.bz2
sha512: 1Hfr7lDJbolSJFbSgBNIwPZfK+rncCNpQJAgIjEtq1hGmF62FJjUr9+k1vymQyeHaoT7bqF4ExQ9JHyzL+owqw==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
RT_HOST="--host=x86_64-pc-cygwin"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/rtems-tester/rtems-cron-6/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 8 15:31:26 2024
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 077d200e1ca1d25bdae81118098a43f65bb5996f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15-1
Config: tools/rtems-tools-6.cfg
Summary:
RTEMS Tools 0483fe3a4bc54e7e928d29c5658a42de4e80ed15 for host x86_64-pc-cygwin
URL:
http://www.rtems.org/
Version:
0483fe3a4bc54e7e928d29c5658a42de4e80ed15
Release:
1
Sources: 1
1: https://gitlab.rtems.org/rtems/tools/rtems-tools/-/archive/0483fe3a4bc54e7e928d29c5658a42de4e80ed15/rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15.tar.bz2
sha512: 1Hfr7lDJbolSJFbSgBNIwPZfK+rncCNpQJAgIjEtq1hGmF62FJjUr9+k1vymQyeHaoT7bqF4ExQ9JHyzL+owqw==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-0483fe3a4bc54e7e928d29c5658a42de4e80ed15
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
RT_HOST="--host=x86_64-pc-cygwin"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/rtems-tester/rtems-cron-6/tools/6
./waf
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 8 15:35:20 2024
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 077d200e1ca1d25bdae81118098a43f65bb5996f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-pc-cygwin-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target mipstx39-rtems6 on host x86_64-pc-cygwin
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: iQQzSjvMXIluzsq8dc2p3sZC5AH7U5fEmSxPq+peliyc6L1E6OQjPDTlXIAQzCjbBUX191DL27XwCvU43HY76Q==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 8 15:35:21 2024
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 077d200e1ca1d25bdae81118098a43f65bb5996f
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-pc-cygwin-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target mipstx39-rtems6 on host x86_64-pc-cygwin
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: iQQzSjvMXIluzsq8dc2p3sZC5AH7U5fEmSxPq+peliyc6L1E6OQjPDTlXIAQzCjbBUX191DL27XwCvU43HY76Q==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-pc-cygwin" != "x86_64-pc-cygwin" ; then
# Cross build
CC=$(echo "x86_64-pc-cygwin-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-pc-cygwin-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-pc-cygwin --host=x86_64-pc-cygwin --verbose --prefix=/home/rtems-tester/rtems-cron-6/tools/6 --bindir=/home/rtems-tester/rtems-cron-6/tools/6/bin --exec-prefix=/home/rtems-tester/rtems-cron-6/tools/6 --includedir=/home/rtems-tester/rtems-cron-6/tools/6/include --libdir=/home/rtems-tester/rtems-cron-6/tools/6/lib --mandir=/home/rtems-tester/rtems-cron-6/tools/6/share/man --infodir=/home/rtems-tester/rtems-cron-6/tools/6/share/info --disable-shared
make -j 8 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list