Build Linux: PASSED 7/rtems-aarch64 on x86_64-linux-gnu
joel at rtems.org
joel at rtems.org
Fri Dec 20 23:59:43 UTC 2024
RTEMS Source Builder - Set Builder, 6 (4bd77e902b76 modified)
Host: Linux-5.14.0-362.13.1.el9_3.x86_64-x86_64-with-glibc2.34
Linux localhost.localdomain 5.14.0-362.13.1.el9_3.x86_64 #1 SMP
PREEMPT_DYNAMIC Wed Dec 13 14:07:45 UTC 2023 x86_64 x86_64
Build Time: 0:12:27.513919
Output
======
Build Set: 7/rtems-aarch64
Build Set: tools/rtems-default-tools.bset
config: devel/dtc-1.7.2-1.cfg
package: dtc-1.7.2-x86_64-linux-gnu-1
building: dtc-1.7.2-x86_64-linux-gnu-1
sizes: dtc-1.7.2-x86_64-linux-gnu-1: 4.425MB (installed: 1.166MB)
cleaning: dtc-1.7.2-x86_64-linux-gnu-1
reporting: devel/dtc-1.7.2-1.cfg -> dtc-1.7.2-x86_64-linux-gnu-1.txt
reporting: devel/dtc-1.7.2-1.cfg -> dtc-1.7.2-x86_64-linux-gnu-1.xml
Build Set: devel/expat-internal.bset
config: devel/expat-2.5.0-1.cfg
package: expat-2.5.0-x86_64-linux-gnu-1
building: expat-2.5.0-x86_64-linux-gnu-1
sizes: expat-2.5.0-x86_64-linux-gnu-1: 9.042MB (installed: 0.000B)
cleaning: expat-2.5.0-x86_64-linux-gnu-1
cleaning: expat-2.5.0-x86_64-linux-gnu-1
Build Set: Time 0:00:05.951194
Build Set: devel/gmp-internal.bset
config: devel/gmp-6.3.0.cfg
package: gmp-6.3.0-x86_64-linux-gnu-1
building: gmp-6.3.0-x86_64-linux-gnu-1
sizes: gmp-6.3.0-x86_64-linux-gnu-1: 35.565MB (installed: 0.000B)
cleaning: gmp-6.3.0-x86_64-linux-gnu-1
cleaning: gmp-6.3.0-x86_64-linux-gnu-1
Build Set: Time 0:00:17.745139
Build Set: devel/mpfr-internal.bset
config: devel/mpfr-4.2.1.cfg
package: mpfr-4.2.1-x86_64-linux-gnu-1
building: mpfr-4.2.1-x86_64-linux-gnu-1
sizes: mpfr-4.2.1-x86_64-linux-gnu-1: 20.195MB (installed: 0.000B)
cleaning: mpfr-4.2.1-x86_64-linux-gnu-1
cleaning: mpfr-4.2.1-x86_64-linux-gnu-1
Build Set: Time 0:00:09.947108
Build Set: textproc/gsed-internal.bset
config: textproc/gsed.cfg
package: gsed-4.9-x86_64-linux-gnu-1
building: gsed-4.9-x86_64-linux-gnu-1
sizes: gsed-4.9-x86_64-linux-gnu-1: 15.839MB (installed: 0.000B)
cleaning: gsed-4.9-x86_64-linux-gnu-1
cleaning: gsed-4.9-x86_64-linux-gnu-1
Build Set: Time 0:00:18.082082
Build Set: print/texinfo-internal.bset
config: print/texinfo.cfg
package: texinfo-7.0.3-x86_64-linux-gnu-1
building: texinfo-7.0.3-x86_64-linux-gnu-1
sizes: texinfo-7.0.3-x86_64-linux-gnu-1: 90.683MB (installed: 0.000B)
cleaning: texinfo-7.0.3-x86_64-linux-gnu-1
cleaning: texinfo-7.0.3-x86_64-linux-gnu-1
Build Set: Time 0:00:19.842346
config: tools/rtems-gdb-15.2.cfg
package: aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1
building: aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1
sizes: aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1: 1.165GB (installed: 196.678MB)
cleaning: aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1
reporting: tools/rtems-gdb-15.2.cfg -> aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gdb-15.2.cfg -> aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1.xml
config: tools/rtems-binutils-2.43.cfg
package: aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1
building: aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1
sizes: aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1: 714.254MB (installed: 196.211MB)
cleaning: aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1
reporting: tools/rtems-binutils-2.43.cfg -> aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1.txt
reporting: tools/rtems-binutils-2.43.cfg -> aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1.xml
config: tools/rtems-gcc-14.2-newlib-head.cfg
package: aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1
building: aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1
sizes: aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1: 6.190GB (installed: 1.669GB)
cleaning: aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1
reporting: tools/rtems-gcc-14.2-newlib-head.cfg -> aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gcc-14.2-newlib-head.cfg -> aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1.xml
config: tools/rtems-tools-7.cfg
package: rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1
building: rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1
sizes: rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1: 294.233MB (installed: 81.160MB)
cleaning: rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1
reporting: tools/rtems-tools-7.cfg -> rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1.txt
reporting: tools/rtems-tools-7.cfg -> rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1.xml
staging: dtc-1.7.2-x86_64-linux-gnu-1 -> /home/joel/rtems-work/rtems-source-builder/rtems/build/tmp/sb-1000-staging
staging: aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1 -> /home/joel/rtems-work/rtems-source-builder/rtems/build/tmp/sb-1000-staging
staging: aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1 -> /home/joel/rtems-work/rtems-source-builder/rtems/build/tmp/sb-1000-staging
staging: aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1 -> /home/joel/rtems-work/rtems-source-builder/rtems/build/tmp/sb-1000-staging
staging: rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1 -> /home/joel/rtems-work/rtems-source-builder/rtems/build/tmp/sb-1000-staging
cleaning: dtc-1.7.2-x86_64-linux-gnu-1
cleaning: aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1
cleaning: aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1
cleaning: aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1
cleaning: rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1
Build Sizes: usage: 8.323GB total: 2.494GB (sources: 370.003MB, patches: 316.502KB, installed 2.133GB)
Build Set: Time 0:12:25.740440
installing: 7/rtems-aarch64 -> /home/joel/rtems-work/tools/7
clean staging: 7/rtems-aarch64
Staging Size: 2.132GB
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:47:19 2024
==============================================================================
Report: devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.7.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.7.2-x86_64-linux-gnu-1
Config: devel/dtc-1.7.2-1.cfg
Summary:
Device Tree Compiler v1.7.2 for target aarch64-rtems7 on host x86_64-linux-gnu
URL:
https://www.devicetree.org/
Version:
1.7.2
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.7.2.tar.xz
sha512: MPNhEXWlwpVWKC8/KJRwGlg364aWCNideMKAr0SLvDpbbIP1HCj5kYR8DrfEKqV1mbvDFDPxs7LI0WLLIWm5Hw==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.7.2
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.7.2
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/joel/rtems-work/tools/7 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.7.2
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/joel/rtems-work/tools/7 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:47:19 2024
==============================================================================
Report: devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.7.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.7.2-x86_64-linux-gnu-1
Config: devel/dtc-1.7.2-1.cfg
Summary:
Device Tree Compiler v1.7.2 for target aarch64-rtems7 on host x86_64-linux-gnu
URL:
https://www.devicetree.org/
Version:
1.7.2
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.7.2.tar.xz
sha512: MPNhEXWlwpVWKC8/KJRwGlg364aWCNideMKAr0SLvDpbbIP1HCj5kYR8DrfEKqV1mbvDFDPxs7LI0WLLIWm5Hw==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.7.2
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.7.2
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/joel/rtems-work/tools/7 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.7.2
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/joel/rtems-work/tools/7 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:50:25 2024
==============================================================================
Report: tools/rtems-gdb-15.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-15.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-15.2.cfg
------------------------------------------------------------------------------
Package: aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1
Config: tools/rtems-gdb-15.2.cfg
Summary:
GDB v15.2 for target aarch64-rtems7 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
15.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-15.2.tar.xz
sha512: YkAH3s61sVuonAcliD0aaZ+kZxTvMIh/PQFl4XxdZdY0ZxdAoTWqaeQ32RYhirsIz6KjjtMJ/xnUj1HaVrKoug==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-15.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "aarch64-rtems7" -o "x86_64-linux-gnu" == "aarch64-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=aarch64-rtems7 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/home/joel/rtems-work/tools/7 --bindir=/home/joel/rtems-work/tools/7/bin --exec-prefix=/home/joel/rtems-work/tools/7 --includedir=/home/joel/rtems-work/tools/7/include --libdir=/home/joel/rtems-work/tools/7/lib --mandir=/home/joel/rtems-work/tools/7/share/man --infodir=/home/joel/rtems-work/tools/7/share/info
make -j 28 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:50:25 2024
==============================================================================
Report: tools/rtems-gdb-15.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-15.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-15.2.cfg
------------------------------------------------------------------------------
Package: aarch64-rtems7-gdb-15.2-x86_64-linux-gnu-1
Config: tools/rtems-gdb-15.2.cfg
Summary:
GDB v15.2 for target aarch64-rtems7 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
15.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-15.2.tar.xz
sha512: YkAH3s61sVuonAcliD0aaZ+kZxTvMIh/PQFl4XxdZdY0ZxdAoTWqaeQ32RYhirsIz6KjjtMJ/xnUj1HaVrKoug==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-15.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "aarch64-rtems7" -o "x86_64-linux-gnu" == "aarch64-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=aarch64-rtems7 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/home/joel/rtems-work/tools/7 --bindir=/home/joel/rtems-work/tools/7/bin --exec-prefix=/home/joel/rtems-work/tools/7 --includedir=/home/joel/rtems-work/tools/7/include --libdir=/home/joel/rtems-work/tools/7/lib --mandir=/home/joel/rtems-work/tools/7/share/man --infodir=/home/joel/rtems-work/tools/7/share/info
make -j 28 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:51:04 2024
==============================================================================
Report: tools/rtems-binutils-2.43.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.43.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.43.cfg
------------------------------------------------------------------------------
Package: aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1
Config: tools/rtems-binutils-2.43.cfg
Summary:
Binutils v2.43 for target aarch64-rtems7 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
2.43
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.43.tar.bz2
sha512: rQBoju8+cIYoUN/YZb1LK6+Vs0M409GzrhvfhAuerA9SihyWdnRY7p0GVZ2tr8yxOqtcqud77fhEQ6VRyu8SiQ==
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.43"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "aarch64-rtems7" -o "x86_64-linux-gnu" == "aarch64-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=aarch64-rtems7 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/joel/rtems-work/tools/7 --bindir=/home/joel/rtems-work/tools/7/bin --exec-prefix=/home/joel/rtems-work/tools/7 --includedir=/home/joel/rtems-work/tools/7/include --libdir=/home/joel/rtems-work/tools/7/lib --mandir=/home/joel/rtems-work/tools/7/share/man --infodir=/home/joel/rtems-work/tools/7/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 28 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/share/man/man1/aarch64-rtems7-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/share/man/man1/aarch64-rtems7-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/share/man/man1/aarch64-rtems7-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/share/man/man1/aarch64-rtems7-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:51:04 2024
==============================================================================
Report: tools/rtems-binutils-2.43.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.43.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.43.cfg
------------------------------------------------------------------------------
Package: aarch64-rtems7-binutils-2.43-x86_64-linux-gnu-1
Config: tools/rtems-binutils-2.43.cfg
Summary:
Binutils v2.43 for target aarch64-rtems7 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
2.43
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/binutils/binutils-2.43.tar.bz2
sha512: rQBoju8+cIYoUN/YZb1LK6+Vs0M409GzrhvfhAuerA9SihyWdnRY7p0GVZ2tr8yxOqtcqud77fhEQ6VRyu8SiQ==
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.43"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "aarch64-rtems7" -o "x86_64-linux-gnu" == "aarch64-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=aarch64-rtems7 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/joel/rtems-work/tools/7 --bindir=/home/joel/rtems-work/tools/7/bin --exec-prefix=/home/joel/rtems-work/tools/7 --includedir=/home/joel/rtems-work/tools/7/include --libdir=/home/joel/rtems-work/tools/7/lib --mandir=/home/joel/rtems-work/tools/7/share/man --infodir=/home/joel/rtems-work/tools/7/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 28 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/share/man/man1/aarch64-rtems7-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/share/man/man1/aarch64-rtems7-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/share/man/man1/aarch64-rtems7-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/share/man/man1/aarch64-rtems7-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:59:20 2024
==============================================================================
Report: tools/rtems-gcc-14.2-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-14.2-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-14.2-newlib-head.cfg
------------------------------------------------------------------------------
Package: aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1
Config: tools/rtems-gcc-14.2-newlib-head.cfg
Summary:
GCC v14.2.0 and Newlib v1b3dcfd for target aarch64-rtems7 on host x86_64-linux-gnu
URL:
http://gcc.gnu.org/
Version:
14.2.0
Release:
1
Sources: 4
1: https://ftp.gnu.org/gnu/gcc/gcc-14.2.0/gcc-14.2.0.tar.xz
sha512: kyve8M2pS6zt9FKrF/EDwMtRH/LOxV6REvwDKMvx2AO0JZVyjqeyAOCgV8A+hWJvk3AS5Jp1Fbxd0layv0vDlg==
2: --rsb-file=newlib-1b3dcfd.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/1b3dcfd
No checksum
3: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.24.tar.bz2
sha512: qrO929qWuAHQ9W0oaflDFXqtUqb25qYXRe3XQCNMY1w4IxryC8PxoI1Bal6XOpDhgkkHjtjkri8dXeV2WHOOlQ==
4: https://ftp.gnu.org/gnu/mpc/mpc-1.3.1.tar.gz
sha512: S6tO9gdvjF39yZ2BC1EQjO1h6ilCugwcky1iQ2ClRz3yDTKzAPx28rpKoql+Hydcn9SUobqfB8TLKtfOrrGulw==
Patches: 2
1: https://gitlab.rtems.org/-/project/26/uploads/5c21ed0a5ada4d4dc57a19e3b97d3e10/gcc-13.3.0-RTEMS-riscv-multilib.patch
sha512: cb8815d02e9d9d51074daa262b95b2288083a6683676c38a27e304cd8479fc3db347e54a4f937e50e232d90da5742fd99d93612de7356bb7fa0bbc98e4938491
2: https://gitlab.rtems.org/-/project/7/uploads/cc2fab985ed0ea695d333fbabd2b2887/v2-0001-libstdc-v3-Enable-features-for-RTEMS.patch
sha512: bu6DuVp4StljkSpA4/rv3Mygi42+LR/ca9s9mLFS/ybTufVm91XYnDB9GF3mU/9h48jf66U9PvrOP0V+Ovb+RQ==
3: https://gitlab.rtems.org/rtems/rtos/rtems/-/blob/main/assets/tracmigration/ticket_attachments/fix-mac-arm64-isl-config.patch
sha512: wH/bYFplINGUNYUEcx5jtUAhHvaAOD8cpOxltKxDridodTT9fYGWpNvoOg7PLEKkJUxx5gnuSEp2FFc7xJmi6A==
Preparation:
build_top=$(pwd)
gcc_source="gcc-14.2.0"
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-1b3dcfd
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.24"
%setup source isl -q -D -n isl-0.24
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpc="mpc-1.3.1"
%setup source mpc -q -D -n mpc-1.3.1
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
echo "RTEMS 7, RSB 4bd77e902b769579002087214135e8aff9fb0bf6-modified, Newlib 1b3dcfd" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
export PATH=/home/joel/rtems-work/rtems-source-builder/rtems/build/tmp/sb-1000-internal/bin:$PATH
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "aarch64-rtems7" -o "x86_64-linux-gnu" == "aarch64-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
languages="$languages,lto"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/home/joel/rtems-work/tools/7 --bindir=/home/joel/rtems-work/tools/7/bin --exec_prefix=/home/joel/rtems-work/tools/7 --includedir=/home/joel/rtems-work/tools/7/include --libdir=/home/joel/rtems-work/tools/7/lib --libexecdir=/home/joel/rtems-work/tools/7/libexec --mandir=/home/joel/rtems-work/tools/7/share/man --infodir=/home/joel/rtems-work/tools/7/share/info --datadir=/home/joel/rtems-work/tools/7/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=aarch64-rtems7 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --disable-werror --enable-version-specific-runtime-libs --enable-newlib-io-c99-formats --enable-newlib-reent-thread-local --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -w -j 28 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-c++filt
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/man/man3/*ffi*
echo "Installing RTEMS stdc++ Pretty Printer support"
RSB_RTEMS_GCC_VERSION=$($SB_BUILD_ROOT_BINDIR/aarch64-rtems7-gcc --version | head -1 | awk '{print $3}')
mkdir -p $SB_BUILD_ROOT//home/joel/rtems-work/tools/7/share/gdb/python/rtems
cat "/home/joel/rtems-work/rtems-source-builder/rtems/config/stdcxx-template.py" | sed "s/@RSB_GCC_VERSION@/${RSB_RTEMS_GCC_VERSION}/g" > "$SB_BUILD_ROOT//home/joel/rtems-work/tools/7/share/gdb/python/rtems/stdcxx.py"
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:59:20 2024
==============================================================================
Report: tools/rtems-gcc-14.2-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-14.2-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-14.2-newlib-head.cfg
------------------------------------------------------------------------------
Package: aarch64-rtems7-gcc-14.2.0-newlib-1b3dcfd-x86_64-linux-gnu-1
Config: tools/rtems-gcc-14.2-newlib-head.cfg
Summary:
GCC v14.2.0 and Newlib v1b3dcfd for target aarch64-rtems7 on host x86_64-linux-gnu
URL:
http://gcc.gnu.org/
Version:
14.2.0
Release:
1
Sources: 4
1: https://ftp.gnu.org/gnu/gcc/gcc-14.2.0/gcc-14.2.0.tar.xz
sha512: kyve8M2pS6zt9FKrF/EDwMtRH/LOxV6REvwDKMvx2AO0JZVyjqeyAOCgV8A+hWJvk3AS5Jp1Fbxd0layv0vDlg==
2: --rsb-file=newlib-1b3dcfd.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/1b3dcfd
No checksum
3: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.24.tar.bz2
sha512: qrO929qWuAHQ9W0oaflDFXqtUqb25qYXRe3XQCNMY1w4IxryC8PxoI1Bal6XOpDhgkkHjtjkri8dXeV2WHOOlQ==
4: https://ftp.gnu.org/gnu/mpc/mpc-1.3.1.tar.gz
sha512: S6tO9gdvjF39yZ2BC1EQjO1h6ilCugwcky1iQ2ClRz3yDTKzAPx28rpKoql+Hydcn9SUobqfB8TLKtfOrrGulw==
Patches: 2
1: https://gitlab.rtems.org/-/project/26/uploads/5c21ed0a5ada4d4dc57a19e3b97d3e10/gcc-13.3.0-RTEMS-riscv-multilib.patch
sha512: cb8815d02e9d9d51074daa262b95b2288083a6683676c38a27e304cd8479fc3db347e54a4f937e50e232d90da5742fd99d93612de7356bb7fa0bbc98e4938491
2: https://gitlab.rtems.org/-/project/7/uploads/cc2fab985ed0ea695d333fbabd2b2887/v2-0001-libstdc-v3-Enable-features-for-RTEMS.patch
sha512: bu6DuVp4StljkSpA4/rv3Mygi42+LR/ca9s9mLFS/ybTufVm91XYnDB9GF3mU/9h48jf66U9PvrOP0V+Ovb+RQ==
3: https://gitlab.rtems.org/rtems/rtos/rtems/-/blob/main/assets/tracmigration/ticket_attachments/fix-mac-arm64-isl-config.patch
sha512: wH/bYFplINGUNYUEcx5jtUAhHvaAOD8cpOxltKxDridodTT9fYGWpNvoOg7PLEKkJUxx5gnuSEp2FFc7xJmi6A==
Preparation:
build_top=$(pwd)
gcc_source="gcc-14.2.0"
source_dir_gcc=${gcc_source}
%setup source gcc -q -n ${gcc_source}
%setup patch gcc -p1
cd ${build_top}
source_dir_newlib=sourceware-mirror-newlib-cygwin-1b3dcfd
%setup source newlib -q -D -n ${source_dir_newlib}
%setup patch newlib -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/newlib
ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
source_dir_isl="isl-0.24"
%setup source isl -q -D -n isl-0.24
%setup patch isl -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/isl
ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
source_dir_mpc="mpc-1.3.1"
%setup source mpc -q -D -n mpc-1.3.1
%setup patch mpc -p1
cd ${build_top}
/bin/rm -f ${source_dir_gcc}/mpc
ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
echo "RTEMS 7, RSB 4bd77e902b769579002087214135e8aff9fb0bf6-modified, Newlib 1b3dcfd" > ${source_dir_gcc}/gcc/DEV-PHASE
cd ${source_dir_gcc}
contrib/gcc_update --touch
cd ${build_top}
Build:
build_top=$(pwd)
export PATH=/home/joel/rtems-work/rtems-source-builder/rtems/build/tmp/sb-1000-internal/bin:$PATH
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "aarch64-rtems7" -o "x86_64-linux-gnu" == "aarch64-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
languages="c"
languages="$languages,c++"
languages="$languages,lto"
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_gcc}/configure --prefix=/home/joel/rtems-work/tools/7 --bindir=/home/joel/rtems-work/tools/7/bin --exec_prefix=/home/joel/rtems-work/tools/7 --includedir=/home/joel/rtems-work/tools/7/include --libdir=/home/joel/rtems-work/tools/7/lib --libexecdir=/home/joel/rtems-work/tools/7/libexec --mandir=/home/joel/rtems-work/tools/7/share/man --infodir=/home/joel/rtems-work/tools/7/share/info --datadir=/home/joel/rtems-work/tools/7/share --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=aarch64-rtems7 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --disable-werror --enable-version-specific-runtime-libs --enable-newlib-io-c99-formats --enable-newlib-reent-thread-local --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages="$languages"
if test "%_host" != "%_build" ; then
mkdir -p gcc/include
cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
fi
make -w -j 28 all
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
/bin/rm -f ${SB_BUILD_ROOT}/home/joel/rtems-work/tools/7/lib/libiberty.a
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/bin/aarch64-rtems7-c++filt
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/man/man3/*ffi*
echo "Installing RTEMS stdc++ Pretty Printer support"
RSB_RTEMS_GCC_VERSION=$($SB_BUILD_ROOT_BINDIR/aarch64-rtems7-gcc --version | head -1 | awk '{print $3}')
mkdir -p $SB_BUILD_ROOT//home/joel/rtems-work/tools/7/share/gdb/python/rtems
cat "/home/joel/rtems-work/rtems-source-builder/rtems/config/stdcxx-template.py" | sed "s/@RSB_GCC_VERSION@/${RSB_RTEMS_GCC_VERSION}/g" > "$SB_BUILD_ROOT//home/joel/rtems-work/tools/7/share/gdb/python/rtems/stdcxx.py"
/bin/rm -rf ${source_dir_gcc}/newlib
/bin/rm -rf ${source_dir_gcc}/mpfr
/bin/rm -rf ${source_dir_gcc}/mpc
/bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:59:33 2024
==============================================================================
Report: tools/rtems-tools-7.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-7.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-7.cfg
------------------------------------------------------------------------------
Package: rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1
Config: tools/rtems-tools-7.cfg
Summary:
RTEMS Tools 82a8824fb5eecb61a6aa4e765f4502d051220e02 for host x86_64-linux-gnu
URL:
http://www.rtems.org/
Version:
82a8824fb5eecb61a6aa4e765f4502d051220e02
Release:
1
Sources: 1
1: https://gitlab.rtems.org/rtems/tools/rtems-tools/-/archive/82a8824fb5eecb61a6aa4e765f4502d051220e02/rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02.tar.bz2
sha512: vDPdoSYOuks1uUPwrdAsITixbWOVqkdJ0+OBdn0L3VCTnoUd7dyZ4H5js1Lemsb6o8kwEyIV+lyncx/K4cEPLQ==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
RT_HOST="--host=x86_64-linux-gnu"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-work/tools/7
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Fri Dec 20 17:59:33 2024
==============================================================================
Report: tools/rtems-tools-7.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: 4bd77e902b769579002087214135e8aff9fb0bf6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-7.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-7.cfg
------------------------------------------------------------------------------
Package: rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02-1
Config: tools/rtems-tools-7.cfg
Summary:
RTEMS Tools 82a8824fb5eecb61a6aa4e765f4502d051220e02 for host x86_64-linux-gnu
URL:
http://www.rtems.org/
Version:
82a8824fb5eecb61a6aa4e765f4502d051220e02
Release:
1
Sources: 1
1: https://gitlab.rtems.org/rtems/tools/rtems-tools/-/archive/82a8824fb5eecb61a6aa4e765f4502d051220e02/rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02.tar.bz2
sha512: vDPdoSYOuks1uUPwrdAsITixbWOVqkdJ0+OBdn0L3VCTnoUd7dyZ4H5js1Lemsb6o8kwEyIV+lyncx/K4cEPLQ==
Patches: 0
Preparation:
build_top=$(pwd)
rtems_tools_source=rtems-tools-82a8824fb5eecb61a6aa4e765f4502d051220e02
source_dir_rtems_tools=${rtems_tools_source}
%setup source rtems-tools -q -n ${rtems_tools_source}
%setup patch rtems-tools -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
RT_HOST="--host=x86_64-linux-gnu"
else
RT_HOST=
fi
cd ${source_dir_rtems_tools}
./waf distclean configure ${RT_HOST} --prefix=/home/joel/rtems-work/tools/7
./waf
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${source_dir_rtems_tools}
./waf --destdir=$SB_BUILD_ROOT install
cd ${build_top}
More information about the build
mailing list