[rtems-test] powerpc/psim: RTEMS_POSIX_API: Passed:618 Failed:7 Timeout:3 Test-Too-long:0 Invalid:0 Wrong:1
OAR Tester for CentOS 7
rtems-tester at oarcorp.com
Mon Jul 22 18:30:42 UTC 2024
Testing time : 0:07:44.779616
Average test time: 0:00:00.727354
Host
====
Linux-3.10.0-1160.114.2.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.114.2.el7.x86_64 #1 SMP Wed Mar 20 15:54:52 UTC 2024 x86_64 x86_64)
Configuration
=============
Version: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
Build : RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
Summary
=======
Passed: 618
Failed: 7
User Input: 6
Expected Fail: 1
Indeterminate: 0
Benchmark: 3
Timeout: 3
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 1
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 639
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
spmountmgr01.exe
minimum.exe
spfatal31.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
spmsgq_err01.exe
tm02.exe
ts-userext.exe
Wrong Build:
spfifo05.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux VM-CentOS7 3.10.0-1160.114.2.el7.x86_64 #1 SMP Wed Mar 20 15:54:52 UTC 2024 x86_64
Python: 2.7.5 (default, Nov 14 2023, 16:14:06) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]
Host: Linux-3.10.0-1160.114.2.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.114.2.el7.x86_64 #1 SMP Wed Mar 20 15:54:52 UTC 2024 x86_64 x86_64)
[ 1/639] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/639] p:6 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:01.015405 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 074]
[ 16/639] p:6 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[103/639] p:91 f:1 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:01.793042 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 074]
[104/639] p:92 f:1 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[183/639] p:166 f:2 u:4 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:02.682576 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] executing thread ID: 0x0b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 070]
[184/639] p:167 f:2 u:4 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[238/639] p:221 f:3 u:4 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:01.648767 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 074]
[239/639] p:221 f:3 u:4 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psxkey09.exe
<<skipping passes>>
[479/639] p:456 f:6 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: spfifo05.exe
Result: wrong-build
Time: 0:00:02.853539 spfifo05.exe
Wrong build: tested value: RTEMS_POSIX_API
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spfifo05.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spfifo05.exe...
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo05.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPFIFO 5
] *** BEGIN OF TEST SPFIFO 5 ***
] *** TEST VERSION: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] *** TEST STATE: EXPECTED_PASS
] "d"
] *** TEST BUILD: Ring from /fifo - OK
] read_task - waiting at a barrier
] Init - releasing the read_task
] Init - waiting at a barrier
] read_task - reading from /fifo - OK
] read_task - releasing the write task
] read_task - waiting at a barrier
] Init - converting the write-mode to non-block
] Init - writing to /fifo - OK
] Init - writing to /fifo - Expect EAGAIN
] Init - releasing the read_task
] Init - waiting at a barrier
] read_task - releasing the write task
] Init - writing to /fifo - Expect EPIPE
] Removing the fifo
=> test end: SPFIFO 5
] *** END OF TEST SPFIFO 5 ***
] [ RTEMS shutdown ]
[480/639] p:457 f:6 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: spfreechain01.exe
<<skipping passes>>
[510/639] p:488 f:6 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:1 | powerpc/psim: spmountmgr01.exe
Result: failed
Time: 0:00:02.056038 spmountmgr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spmountmgr01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spmountmgr01.exe...
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spmountmgr01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPMOUNTMGR 1
] *** BEGIN OF TEST SPMOUNTMGR 1 ***
] *** TEST VERSION: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] "9"
] Init - allocating most of heap a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 074]
[511/639] p:488 f:6 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:1 | powerpc/psim: spmrsp01.exe
[512/639] p:488 f:6 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:1 | powerpc/psim: spmsgq_err01.exe
Result: timeout
Time: 0:03:12.858952 spmsgq_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spmsgq_err01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spmsgq_err01.exe...
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spmsgq_err01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP MESSAGE QUEUE ERROR 1
] *** BEGIN OF TEST SP MESSAGE QUEUE ERROR 1 ***
] *** TEST VERSION: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] TA1 - rtems_message_queue_broadcast - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_create - NULL Id - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_create - count = 0 - RTEMS_INVALID_NUMBER
] TA1 - rtems_message_queue_create - size = 0 - RTEMS_INVALID_SIZE
] TA1 - rtems_message_queue_create - Q 1 - RTEMS_INVALID_NAME
] TA1 - rtems_message_queue_create - Q 2 - RTEMS_UNSATISFIED
] TA1 - rtems_message_queue_create - Q 2 - RTEMS_INVALID_NUMBER
] TA1 - rtems_message_queue_create - Q 1 - 2 DEEP - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_create - Q 2 - RTEMS_TOO_MANY
] TA1 - rtems_message_queue_delete - unknown RTEMS_INVALID_ID
] TA1 - rtems_message_queue_delete - local RTEMS_INVALID_ID
] TA1 - rtems_message_queue_ident - RTEMS_INVALID_NAME
] TA1 - rtems_message_queue_get_number_pending - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_get_number_pending - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_flush - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_flush - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_receive - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_receive - Q 1 - RTEMS_INVALID_ADDRESS NULL buffer
] TA1 - rtems_message_queue_receive - Q 1 - RTEMS_INVALID_ADDRESS NULL size
] TA1 - rtems_message_queue_receive - Q 1 - RTEMS_UNSATISFIED
] TA1 - rtems_message_queue_receive - Q 1 - timeout in 3 seconds
] TA1 - rtems_message_queue_receive - Q 1 - woke up with RTEMS_TIMEOUT
] TA1 - rtems_message_queue_send - NULL buffer - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_send - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_send - BUFFER 1 TO Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 2 TO Q 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_message_queue_send - BUFFER 3 TO Q 1 - RTEMS_TOO_MANY
] TA1 - rtems_message_queue_urgent - NULL buffer - RTEMS_INVALID_ADDRESS
] TA1 - rtems_message_queue_urgent - RTEMS_INVALID_ID
] TA1 - rtems_message_queue_broadcast - NULL buffer - RTEMS_INVALID_ADDRESS
=> test end: SP MESSAGE QUEUE ERROR 1
] *** TIMEOUT TIMEOUT
[513/639] p:489 f:6 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:1 | powerpc/psim: spmsgq_err02.exe
<<skipping passes>>
[577/639] p:553 f:7 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:1 | powerpc/psim: tm02.exe
Result: timeout
Time: 0:03:09.133222 tm02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tm02.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tm02.exe...
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm02.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TIME TEST 2
] *** BEGIN OF TEST TIME TEST 2 ***
] *** TEST VERSION: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
=> test end: TIME TEST 2
] *** TIMEOUT TIMEOUT
[578/639] p:553 f:7 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:1 | powerpc/psim: tm03.exe
<<skipping passes>>
[624/639] p:599 f:7 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:1 | powerpc/psim: ts-userext.exe
Result: timeout
Time: 0:03:09.591250 ts-userext.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/validation/ts-userext.exe...
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TestsuitesUserext
] *** BEGIN OF TEST TestsuitesUserext ***
] *** TEST VERSION: 6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] A:TestsuitesUserext
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 49a9d9ab3e0a392acbc47b4bdc8c3ae683100cd1, Newlib 1339af4)
] S:Version:6.0.0.7333afe0ae5935608ba882500491c2795eed9a9d
] S:BSP:psim
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:FxbUPMFAfdnPCU2b0Y4l-hl4WMdj1U-2DWddZSVVsUA=
] S:RTEMS_DEBUG:0
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:RtemsUserextValUserext
=> test end: TestsuitesUserext
] *** TIMEOUT TIMEOUT
[625/639] p:600 f:7 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:1 | powerpc/psim: ts-validation-0.exe
<<skipping passes>>
[639/639] p:614 f:7 u:6 e:0 I:0 B:3 t:0 L:0 i:0 W:1 | powerpc/psim: ts-validation-tls-1.exe
Passed: 618
Failed: 7
User Input: 6
Expected Fail: 1
Indeterminate: 0
Benchmark: 3
Timeout: 3
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 1
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 639
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
spmountmgr01.exe
minimum.exe
spfatal31.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
spmsgq_err01.exe
tm02.exe
ts-userext.exe
Wrong Build:
spfifo05.exe
Average test time: 0:00:00.727354
Testing time : 0:07:44.779616
More information about the build
mailing list