Build FreeBSD: PASSED 6/rtems-riscv on x86_64-freebsd13.2

OAR Tester for FreeBSD 13 rtems-tester at oarcorp.com
Sun Jun 30 16:09:42 UTC 2024


RTEMS Source Builder - Set Builder, 6 (0c685d82082a)

Host: FreeBSD-13.2-RELEASE-p11-amd64-64bit-ELF
       FreeBSD VM-FreeBSD13.rtems.com 13.2-RELEASE-p11 FreeBSD 13.2-RELEASE-p11
       GENERIC amd64 amd64

Build Time: 0:31:45.457393


Output
======

Build Set: 6/rtems-riscv
Build Set: tools/rtems-default-tools.bset
config: devel/dtc-1.6.1-1.cfg
package: dtc-1.6.1-x86_64-freebsd13.2-1
building: dtc-1.6.1-x86_64-freebsd13.2-1
sizes: dtc-1.6.1-x86_64-freebsd13.2-1: 4.208MB (installed: 1.114MB)
cleaning: dtc-1.6.1-x86_64-freebsd13.2-1
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-freebsd13.2-1.txt
reporting: devel/dtc-1.6.1-1.cfg -> dtc-1.6.1-x86_64-freebsd13.2-1.xml
Build Set: devel/expat-internal.bset
config: devel/expat-2.5.0-1.cfg
package: expat-2.5.0-x86_64-freebsd13.2-1
building: expat-2.5.0-x86_64-freebsd13.2-1
sizes: expat-2.5.0-x86_64-freebsd13.2-1: 9.234MB (installed: 0.000B)
cleaning: expat-2.5.0-x86_64-freebsd13.2-1
cleaning: expat-2.5.0-x86_64-freebsd13.2-1
Build Set: Time 0:00:05.305959
Build Set: devel/gmp-internal.bset
config: devel/gmp-6.3.0.cfg
package: gmp-6.3.0-x86_64-freebsd13.2-1
building: gmp-6.3.0-x86_64-freebsd13.2-1
sizes: gmp-6.3.0-x86_64-freebsd13.2-1: 22.482MB (installed: 0.000B)
cleaning: gmp-6.3.0-x86_64-freebsd13.2-1
cleaning: gmp-6.3.0-x86_64-freebsd13.2-1
Build Set: Time 0:00:31.695289
Build Set: devel/mpfr-internal.bset
config: devel/mpfr-4.2.1.cfg
package: mpfr-4.2.1-x86_64-freebsd13.2-1
building: mpfr-4.2.1-x86_64-freebsd13.2-1
sizes: mpfr-4.2.1-x86_64-freebsd13.2-1: 17.751MB (installed: 0.000B)
cleaning: mpfr-4.2.1-x86_64-freebsd13.2-1
cleaning: mpfr-4.2.1-x86_64-freebsd13.2-1
Build Set: Time 0:00:09.082424
Build Set: textproc/gsed-internal.bset
config: textproc/gsed.cfg
package: gsed-4.9-x86_64-freebsd13.2-1
building: gsed-4.9-x86_64-freebsd13.2-1
sizes: gsed-4.9-x86_64-freebsd13.2-1: 16.869MB (installed: 0.000B)
cleaning: gsed-4.9-x86_64-freebsd13.2-1
cleaning: gsed-4.9-x86_64-freebsd13.2-1
Build Set: Time 0:00:25.042935
Build Set: print/texinfo-internal.bset
config: print/texinfo.cfg
package: texinfo-7.0.3-x86_64-freebsd13.2-1
building: texinfo-7.0.3-x86_64-freebsd13.2-1
sizes: texinfo-7.0.3-x86_64-freebsd13.2-1: 89.258MB (installed: 0.000B)
cleaning: texinfo-7.0.3-x86_64-freebsd13.2-1
cleaning: texinfo-7.0.3-x86_64-freebsd13.2-1
Build Set: Time 0:00:32.881597
config: tools/rtems-gdb-14.2.cfg
package: riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1
building: riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1
sizes: riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1: 975.690MB (installed: 150.892MB)
cleaning: riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1
reporting: tools/rtems-gdb-14.2.cfg -> riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1.txt
reporting: tools/rtems-gdb-14.2.cfg -> riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1.xml
config: tools/rtems-binutils-2.42.cfg
package: riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1
building: riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1
sizes: riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1: 637.889MB (installed: 168.180MB)
cleaning: riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1
reporting: tools/rtems-binutils-2.42.cfg -> riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1.txt
reporting: tools/rtems-binutils-2.42.cfg -> riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1.xml
config: tools/rtems-gcc-13.3-newlib-head.cfg
package: riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1
building: riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1
sizes: riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1: 12.442GB (installed: 2.979GB)
cleaning: riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1
reporting: tools/rtems-gcc-13.3-newlib-head.cfg -> riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1.txt
reporting: tools/rtems-gcc-13.3-newlib-head.cfg -> riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1.xml
config: tools/rtems-tools-6.cfg
package: rtems-tools-103d03a950facb08661b91dedee68d656d831373-1
building: rtems-tools-103d03a950facb08661b91dedee68d656d831373-1
sizes: rtems-tools-103d03a950facb08661b91dedee68d656d831373-1: 247.710MB (installed: 59.388MB)
cleaning: rtems-tools-103d03a950facb08661b91dedee68d656d831373-1
reporting: tools/rtems-tools-6.cfg -> rtems-tools-103d03a950facb08661b91dedee68d656d831373-1.txt
reporting: tools/rtems-tools-6.cfg -> rtems-tools-103d03a950facb08661b91dedee68d656d831373-1.xml
staging: dtc-1.6.1-x86_64-freebsd13.2-1 -> /usr/home/tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1003-staging
staging: riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1 -> /usr/home/tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1003-staging
staging: riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1 -> /usr/home/tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1003-staging
staging: riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1 -> /usr/home/tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1003-staging
staging: rtems-tools-103d03a950facb08661b91dedee68d656d831373-1 -> /usr/home/tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1003-staging
cleaning: dtc-1.6.1-x86_64-freebsd13.2-1
cleaning: riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1
cleaning: riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1
cleaning: riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1
cleaning: rtems-tools-103d03a950facb08661b91dedee68d656d831373-1
Build Sizes: usage: 15.792GB total: 3.741GB (sources: 400.513MB, patches: 274.705KB, installed 3.350GB)
Build Set: Time 0:31:21.527426
config: devel/sis-2-1.cfg
package: sis-2.30-x86_64-freebsd13.2-1
download: https://gitlab.rtems.org/rtems/tools/rtems-sis/-/archive/2.30/rtems-sis-2.30.tar.bz2 -> sources/rtems-sis-2.30.tar.bz2
building: sis-2.30-x86_64-freebsd13.2-1
sizes: sis-2.30-x86_64-freebsd13.2-1: 2.370MB (installed: 260.737KB)
cleaning: sis-2.30-x86_64-freebsd13.2-1
reporting: devel/sis-2-1.cfg -> sis-2.30-x86_64-freebsd13.2-1.txt
reporting: devel/sis-2-1.cfg -> sis-2.30-x86_64-freebsd13.2-1.xml
staging: sis-2.30-x86_64-freebsd13.2-1 -> /usr/home/tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1003-staging
installing: sis-2.30-x86_64-freebsd13.2-1 -> /home/tester/rtems-cron-6/tools/6
cleaning: sis-2.30-x86_64-freebsd13.2-1
installing: 6/rtems-riscv -> /home/tester/rtems-cron-6/tools/6
clean staging: 6/rtems-riscv
Staging Size: 3.350GB
Mailing report: build at rtems.org

Report
======

==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 10:38:01 2024
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-freebsd13.2-1
 Config: devel/dtc-1.6.1-1.cfg
 Summary:
  Device Tree Compiler v1.6.1 for target riscv-rtems6 on host x86_64-freebsd13.2
 URL:
  https://www.devicetree.org/
 Version:
  1.6.1
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
       sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
  Patches: 1
    1: https://gitlab.rtems.org/rtems/rtos/rtems/-/blob/main/assets/tracmigration/ticket_attachments/0001-checks.c-Ensure-argument-is-an-integer-v2.patch
       sha256: dd83c10326188732ac26c1fd8dce70b796a7dde204b31c67cf4d04f29ed4dfef
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.6.1
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.6.1
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  LIBS="${SB_HOST_LIBS}"
  CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
  gmake PREFIX=/home/tester/rtems-cron-6/tools/6 WARNINGS=
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.6.1
  gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/home/tester/rtems-cron-6/tools/6 WARNINGS= install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 10:38:01 2024
==============================================================================
Report: devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.6.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.6.1-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.6.1-x86_64-freebsd13.2-1
 Config: devel/dtc-1.6.1-1.cfg
 Summary:
  Device Tree Compiler v1.6.1 for target riscv-rtems6 on host x86_64-freebsd13.2
 URL:
  https://www.devicetree.org/
 Version:
  1.6.1
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.6.1.tar.gz
       sha256: 38a6257f2c23cb9dfa1781ac4ad122d8358e1a22d33b2da0eb492c190644a376
  Patches: 1
    1: https://gitlab.rtems.org/rtems/rtos/rtems/-/blob/main/assets/tracmigration/ticket_attachments/0001-checks.c-Ensure-argument-is-an-integer-v2.patch
       sha256: dd83c10326188732ac26c1fd8dce70b796a7dde204b31c67cf4d04f29ed4dfef
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.6.1
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.6.1
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  LIBS="${SB_HOST_LIBS}"
  CC=$(echo "/usr/bin/cc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "/usr/bin/c++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
  gmake PREFIX=/home/tester/rtems-cron-6/tools/6 WARNINGS=
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.6.1
  gmake DESTDIR=$SB_BUILD_ROOT PREFIX=/home/tester/rtems-cron-6/tools/6 WARNINGS= install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 10:41:53 2024
==============================================================================
Report: tools/rtems-gdb-14.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-14.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-14.2.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1
 Config: tools/rtems-gdb-14.2.cfg
 Summary:
  GDB v14.2 for target riscv-rtems6 on host x86_64-freebsd13.2
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  14.2
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/gdb/gdb-14.2.tar.xz
       sha512: fgeUHx/mYSiMxXG0lkASzqvBdgYk/OIDINsvRwwBQ5sjhvhZtSiNoTIEt1ji47IqdMaMASF425O5UpsG8eIu3g==
  Patches: 1
    1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
       No checksum
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-14.2"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "riscv-rtems6" -o "x86_64-freebsd13.2" == "riscv-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.2-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.2-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-freebsd13.2 --host=x86_64-freebsd13.2  --target=riscv-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof    --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-sim    --without-zlib  --with-expat  --with-guile=no  --with-libiconv-prefix=/usr/local  --with-python=/usr/local/bin/python3  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info
  gmake -j 8 all V=1
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 10:41:53 2024
==============================================================================
Report: tools/rtems-gdb-14.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-14.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-14.2.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gdb-14.2-x86_64-freebsd13.2-1
 Config: tools/rtems-gdb-14.2.cfg
 Summary:
  GDB v14.2 for target riscv-rtems6 on host x86_64-freebsd13.2
 URL:
  http://www.gnu.org/software/gdb/
 Version:
  14.2
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/gdb/gdb-14.2.tar.xz
       sha512: fgeUHx/mYSiMxXG0lkASzqvBdgYk/OIDINsvRwwBQ5sjhvhZtSiNoTIEt1ji47IqdMaMASF425O5UpsG8eIu3g==
  Patches: 1
    1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
       No checksum
 Preparation:
  build_top=$(pwd)
  gdb_source="gdb-14.2"
  source_dir_gdb=${gdb_source}
  %setup source gdb -q -n ${gdb_source}
  %setup patch gdb -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "riscv-rtems6" -o "x86_64-freebsd13.2" == "riscv-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.2-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.2-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
  GDB_LIBS_STATIC="-lexpat"
  else
  GDB_LIBS_STATIC="-lexpat"
  GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
  fi
  LIBS_STATIC=${GDB_LIBS_STATIC}  LIBS=${GDB_LIBS}  ../${source_dir_gdb}/configure  --build=x86_64-freebsd13.2 --host=x86_64-freebsd13.2  --target=riscv-rtems6  --verbose --disable-nls  --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof    --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-sim    --without-zlib  --with-expat  --with-guile=no  --with-libiconv-prefix=/usr/local  --with-python=/usr/local/bin/python3  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info
  gmake -j 8 all V=1
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 10:42:48 2024
==============================================================================
Report: tools/rtems-binutils-2.42.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.42.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.42.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1
 Config: tools/rtems-binutils-2.42.cfg
 Summary:
  Binutils v2.42 for target riscv-rtems6 on host x86_64-freebsd13.2
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.42
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/binutils/binutils-2.42.tar.bz2
       sha512: 0sbSZLvqqvKq0fo/xBfBhBpd1KKZ+kfEfRWtuCHCLa5zPljxnrz+o7DFiQulbkpfkqtVEopXLVhbzVFytj9FbA==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.42"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "riscv-rtems6" -o "x86_64-freebsd13.2" == "riscv-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.2-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.2-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure  --build=x86_64-freebsd13.2 --host=x86_64-freebsd13.2  --target=riscv-rtems6  --verbose --disable-nls  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim  --enable-deterministic-archives  --enable-64-bit-bfd    --without-included-gettext  --disable-win32-registry  --disable-werror  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --disable-warn-execstack --disable-warn-rwx-segments
  gmake -j 8 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/riscv-rtems6-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/riscv-rtems6-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/riscv-rtems6-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/riscv-rtems6-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 10:42:48 2024
==============================================================================
Report: tools/rtems-binutils-2.42.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.42.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.42.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-binutils-2.42-x86_64-freebsd13.2-1
 Config: tools/rtems-binutils-2.42.cfg
 Summary:
  Binutils v2.42 for target riscv-rtems6 on host x86_64-freebsd13.2
 URL:
  http://sources.redhat.com/binutils
 Version:
  2.42
 Release:
  1
  Sources: 1
    1: https://ftp.gnu.org/gnu/binutils/binutils-2.42.tar.bz2
       sha512: 0sbSZLvqqvKq0fo/xBfBhBpd1KKZ+kfEfRWtuCHCLa5zPljxnrz+o7DFiQulbkpfkqtVEopXLVhbzVFytj9FbA==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  binutils_source="binutils-2.42"
  source_dir_binutils=${binutils_source}
  %setup source binutils -q -n ${binutils_source}
  %setup patch binutils -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "riscv-rtems6" -o "x86_64-freebsd13.2" == "riscv-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.2-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.2-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_binutils}/configure  --build=x86_64-freebsd13.2 --host=x86_64-freebsd13.2  --target=riscv-rtems6  --verbose --disable-nls  --disable-gdb --disable-libdecnumber --disable-readline --disable-sim  --enable-deterministic-archives  --enable-64-bit-bfd    --without-included-gettext  --disable-win32-registry  --disable-werror  --prefix=/home/tester/rtems-cron-6/tools/6 --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec-prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include --libdir=/home/tester/rtems-cron-6/tools/6/lib  --mandir=/home/tester/rtems-cron-6/tools/6/share/man --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --disable-warn-execstack --disable-warn-rwx-segments
  gmake -j 8 all
  cd ${build_top}
 Install:
  cd ${build_top}
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  /bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/configure.info*
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  touch $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  mkdir -p $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/locale
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/lib/libiberty*
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-dlltool; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/riscv-rtems6-dlltool*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-nlmconv; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/riscv-rtems6-nlmconv*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-windres; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/riscv-rtems6-windres*
  fi
  if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-windmc; then
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/share/man/man1/riscv-rtems6-windmc*
  fi
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 11:05:52 2024
==============================================================================
Report: tools/rtems-gcc-13.3-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-13.3-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-13.3-newlib-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1
 Config: tools/rtems-gcc-13.3-newlib-head.cfg
 Summary:
  GCC v13.3.0 and Newlib v1ed1516 for target riscv-rtems6 on host x86_64-freebsd13.2
 URL:
  http://gcc.gnu.org/
 Version:
  13.3.0
 Release:
  1
  Sources: 4
    1: --rsb-file=newlib-1ed1516.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/1ed1516
       No checksum
    2: https://ftp.gnu.org/gnu/gcc/gcc-13.3.0/gcc-13.3.0.tar.xz
       sha512: 7V8vTG7Sx5b88sk3BxWenb092xugY9VJgE3WjNq7ttVQmFrhyEZa6aM2z+KSdKbrD0LiGSQ2BXTr2OXVx8moAQ==
    3: https://ftp.gnu.org/gnu/mpc/mpc-1.3.1.tar.gz
       sha512: S6tO9gdvjF39yZ2BC1EQjO1h6ilCugwcky1iQ2ClRz3yDTKzAPx28rpKoql+Hydcn9SUobqfB8TLKtfOrrGulw==
    4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.24.tar.bz2
       sha512: qrO929qWuAHQ9W0oaflDFXqtUqb25qYXRe3XQCNMY1w4IxryC8PxoI1Bal6XOpDhgkkHjtjkri8dXeV2WHOOlQ==
  Patches: 1
    1: https://gitlab.rtems.org/rtems/rtos/rtems/-/blob/main/assets/tracmigration/ticket_attachments/fix-mac-arm64-isl-config.patch
       sha512: wH/bYFplINGUNYUEcx5jtUAhHvaAOD8cpOxltKxDridodTT9fYGWpNvoOg7PLEKkJUxx5gnuSEp2FFc7xJmi6A==
 Preparation:
  build_top=$(pwd)
  gcc_source="gcc-13.3.0"
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib=sourceware-mirror-newlib-cygwin-1ed1516
  %setup source newlib -q -D -n ${source_dir_newlib}
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_isl="isl-0.24"
  %setup source isl -q -D -n isl-0.24
  %setup patch isl -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/isl
  ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
  source_dir_mpc="mpc-1.3.1"
  %setup source mpc -q -D -n mpc-1.3.1
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  echo "RTEMS 6, RSB 0c685d82082ab6d821b5a4da89b2d904ea7a705c, Newlib 1ed1516" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  export PATH=/usr/home/tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1003-internal/bin:$PATH
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "riscv-rtems6" -o "x86_64-freebsd13.2" == "riscv-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  languages="$languages,lto"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.2-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.2-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gcc}/configure  --prefix=/home/tester/rtems-cron-6/tools/6  --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec_prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include  --libdir=/home/tester/rtems-cron-6/tools/6/lib  --libexecdir=/home/tester/rtems-cron-6/tools/6/libexec  --mandir=/home/tester/rtems-cron-6/tools/6/share/man  --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --datadir=/home/tester/rtems-cron-6/tools/6/share  --build=x86_64-freebsd13.2 --host=x86_64-freebsd13.2  --target=riscv-rtems6  --disable-libstdcxx-pch  --with-gnu-as --with-gnu-ld --verbose  --with-newlib  --disable-nls --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-version-specific-runtime-libs  --enable-newlib-io-c99-formats    --enable-newlib-reent-thread-local  --enable-newlib-iconv  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258  --enable-threads  --disable-plugin    --enable-libgomp    --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  gmake -w -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-c++filt
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 11:05:52 2024
==============================================================================
Report: tools/rtems-gcc-13.3-newlib-head.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gcc-13.3-newlib-head.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gcc-13.3-newlib-head.cfg
------------------------------------------------------------------------------
Package: riscv-rtems6-gcc-13.3.0-newlib-1ed1516-x86_64-freebsd13.2-1
 Config: tools/rtems-gcc-13.3-newlib-head.cfg
 Summary:
  GCC v13.3.0 and Newlib v1ed1516 for target riscv-rtems6 on host x86_64-freebsd13.2
 URL:
  http://gcc.gnu.org/
 Version:
  13.3.0
 Release:
  1
  Sources: 4
    1: --rsb-file=newlib-1ed1516.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-newlib-cygwin/tar.gz/1ed1516
       No checksum
    2: https://ftp.gnu.org/gnu/gcc/gcc-13.3.0/gcc-13.3.0.tar.xz
       sha512: 7V8vTG7Sx5b88sk3BxWenb092xugY9VJgE3WjNq7ttVQmFrhyEZa6aM2z+KSdKbrD0LiGSQ2BXTr2OXVx8moAQ==
    3: https://ftp.gnu.org/gnu/mpc/mpc-1.3.1.tar.gz
       sha512: S6tO9gdvjF39yZ2BC1EQjO1h6ilCugwcky1iQ2ClRz3yDTKzAPx28rpKoql+Hydcn9SUobqfB8TLKtfOrrGulw==
    4: https://gcc.gnu.org/pub/gcc/infrastructure/isl-0.24.tar.bz2
       sha512: qrO929qWuAHQ9W0oaflDFXqtUqb25qYXRe3XQCNMY1w4IxryC8PxoI1Bal6XOpDhgkkHjtjkri8dXeV2WHOOlQ==
  Patches: 1
    1: https://gitlab.rtems.org/rtems/rtos/rtems/-/blob/main/assets/tracmigration/ticket_attachments/fix-mac-arm64-isl-config.patch
       sha512: wH/bYFplINGUNYUEcx5jtUAhHvaAOD8cpOxltKxDridodTT9fYGWpNvoOg7PLEKkJUxx5gnuSEp2FFc7xJmi6A==
 Preparation:
  build_top=$(pwd)
  gcc_source="gcc-13.3.0"
  source_dir_gcc=${gcc_source}
  %setup source gcc -q -n ${gcc_source}
  %setup patch gcc -p1
  cd ${build_top}
  source_dir_newlib=sourceware-mirror-newlib-cygwin-1ed1516
  %setup source newlib -q -D -n ${source_dir_newlib}
  %setup patch newlib -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/newlib
  ln -s $PWD/${source_dir_newlib}/newlib ${source_dir_gcc}/newlib
  source_dir_isl="isl-0.24"
  %setup source isl -q -D -n isl-0.24
  %setup patch isl -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/isl
  ln -s $PWD/${source_dir_isl} ${source_dir_gcc}/isl
  source_dir_mpc="mpc-1.3.1"
  %setup source mpc -q -D -n mpc-1.3.1
  %setup patch mpc -p1
  cd ${build_top}
  /bin/rm -f ${source_dir_gcc}/mpc
  ln -s $PWD/${source_dir_mpc} ${source_dir_gcc}/mpc
  echo "RTEMS 6, RSB 0c685d82082ab6d821b5a4da89b2d904ea7a705c, Newlib 1ed1516" > ${source_dir_gcc}/gcc/DEV-PHASE
  cd ${source_dir_gcc}
  contrib/gcc_update --touch
  cd ${build_top}
 Build:
  build_top=$(pwd)
  export PATH=/usr/home/tester/rtems-cron-6/rtems-source-builder/rtems/build/tmp/sb-1003-internal/bin:$PATH
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "riscv-rtems6" -o "x86_64-freebsd13.2" == "riscv-rtems6" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  languages="c"
  languages="$languages,c++"
  languages="$languages,lto"
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
    # Cross build
    CC=$(echo "x86_64-freebsd13.2-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-freebsd13.2-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "/usr/bin/cc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "/usr/bin/c++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gcc}/configure  --prefix=/home/tester/rtems-cron-6/tools/6  --bindir=/home/tester/rtems-cron-6/tools/6/bin  --exec_prefix=/home/tester/rtems-cron-6/tools/6  --includedir=/home/tester/rtems-cron-6/tools/6/include  --libdir=/home/tester/rtems-cron-6/tools/6/lib  --libexecdir=/home/tester/rtems-cron-6/tools/6/libexec  --mandir=/home/tester/rtems-cron-6/tools/6/share/man  --infodir=/home/tester/rtems-cron-6/tools/6/share/info  --datadir=/home/tester/rtems-cron-6/tools/6/share  --build=x86_64-freebsd13.2 --host=x86_64-freebsd13.2  --target=riscv-rtems6  --disable-libstdcxx-pch  --with-gnu-as --with-gnu-ld --verbose  --with-newlib  --disable-nls --without-included-gettext  --disable-win32-registry  --disable-werror  --enable-version-specific-runtime-libs  --enable-newlib-io-c99-formats    --enable-newlib-reent-thread-local  --enable-newlib-iconv  --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,\
  cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,\
  iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,\
  iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,\
  iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,\
  ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,\
  utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,\
  win_1253,win_1254,win_1255,win_1256,win_1257,win_1258  --enable-threads  --disable-plugin    --enable-libgomp    --enable-languages="$languages"
  if test "%_host" != "%_build" ; then
  mkdir -p gcc/include
  cp ../${source_dir_gcc}/gcc/gsyslimits.h gcc/include/syslimits.h
  fi
  gmake -w -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
  /bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-6/tools/6/lib/libiberty.a
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/bin/riscv-rtems6-c++filt
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/info/dir
  /bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-6/tools/6/share/man/man3/*ffi*
  /bin/rm -rf ${source_dir_gcc}/newlib
  /bin/rm -rf ${source_dir_gcc}/mpfr
  /bin/rm -rf ${source_dir_gcc}/mpc
  /bin/rm -rf ${source_dir_gcc}/gmp
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 11:06:09 2024
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-103d03a950facb08661b91dedee68d656d831373-1
 Config: tools/rtems-tools-6.cfg
 Summary:
  RTEMS Tools 103d03a950facb08661b91dedee68d656d831373 for host x86_64-freebsd13.2
 URL:
  http://www.rtems.org/
 Version:
  103d03a950facb08661b91dedee68d656d831373
 Release:
  1
  Sources: 1
    1: https://gitlab.rtems.org/rtems/tools/rtems-tools/-/archive/103d03a950facb08661b91dedee68d656d831373/rtems-tools-103d03a950facb08661b91dedee68d656d831373.tar.bz2
       sha512: ZxFOMnKFuP39EvUM8VESEKnbxriYGeqHly34tuAoo/cx7E1kBIqjkH3UbHnA24KBTewInOhlNKn9HY0HPKaO6w==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-103d03a950facb08661b91dedee68d656d831373
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
  RT_HOST="--host=x86_64-freebsd13.2"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/tester/rtems-cron-6/tools/6
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 11:06:09 2024
==============================================================================
Report: tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-tools-6.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-tools-6.cfg
------------------------------------------------------------------------------
Package: rtems-tools-103d03a950facb08661b91dedee68d656d831373-1
 Config: tools/rtems-tools-6.cfg
 Summary:
  RTEMS Tools 103d03a950facb08661b91dedee68d656d831373 for host x86_64-freebsd13.2
 URL:
  http://www.rtems.org/
 Version:
  103d03a950facb08661b91dedee68d656d831373
 Release:
  1
  Sources: 1
    1: https://gitlab.rtems.org/rtems/tools/rtems-tools/-/archive/103d03a950facb08661b91dedee68d656d831373/rtems-tools-103d03a950facb08661b91dedee68d656d831373.tar.bz2
       sha512: ZxFOMnKFuP39EvUM8VESEKnbxriYGeqHly34tuAoo/cx7E1kBIqjkH3UbHnA24KBTewInOhlNKn9HY0HPKaO6w==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  rtems_tools_source=rtems-tools-103d03a950facb08661b91dedee68d656d831373
  source_dir_rtems_tools=${rtems_tools_source}
  %setup source rtems-tools -q -n ${rtems_tools_source}
  %setup patch rtems-tools -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
  RT_HOST="--host=x86_64-freebsd13.2"
  else
  RT_HOST=
  fi
  cd ${source_dir_rtems_tools}
  ./waf distclean configure ${RT_HOST} --prefix=/home/tester/rtems-cron-6/tools/6
  ./waf
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_rtems_tools}
  ./waf --destdir=$SB_BUILD_ROOT install
  cd ${build_top}


==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 11:09:23 2024
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.30-x86_64-freebsd13.2-1
 Config: devel/sis-2-1.cfg
 Summary:
  Sis v2.30 for host x86_64-freebsd13.2
 Version:
  2.30
 Release:
  1
  Sources: 1
    1: https://gitlab.rtems.org/rtems/tools/rtems-sis/-/archive/2.30/rtems-sis-2.30.tar.bz2
       sha512: eVE6w76AqW4aPsixlZOj8VV7e2RAsXPp+jbS4WHWubgSK8DXHKyuM9aiaM4mh1rpsU/8U1y3u00X6Xj7U/82Vg==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source sis -q -n rtems-sis-2.30
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd rtems-sis-2.30
  ac_prefix=/home/tester/rtems-cron-6/tools/6
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
  CFLAGS_FOR_BUILD="-g -O2 -Wall"
  fi
  export CFLAGS CFLAGS_FOR_BUILD CC
  if test "riscv-rtems6" != "" ; then
  SIS_PREFIX="riscv-rtems6-"
  fi
  CFLAGS="$SB_CFLAGS"  ./configure  --program-prefix="$SIS_PREFIX"  --prefix=${ac_prefix}
  gmake -j 8 all
  unset CFLAGS_FOR_BUILD
  cd ${build_top}
 Install:
  build_top=$(pwd)
  export PATH="/home/tester/rtems-cron-6/tools/6/bin:${PATH}"
  /bin/rm -rf $SB_BUILD_ROOT
  cd rtems-sis-2.30
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Sun Jun 30 11:09:23 2024
==============================================================================
Report: devel/sis-2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 0c685d82082ab6d821b5a4da89b2d904ea7a705c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/sis-2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/sis-2-1.cfg
------------------------------------------------------------------------------
Package: sis-2.30-x86_64-freebsd13.2-1
 Config: devel/sis-2-1.cfg
 Summary:
  Sis v2.30 for host x86_64-freebsd13.2
 Version:
  2.30
 Release:
  1
  Sources: 1
    1: https://gitlab.rtems.org/rtems/tools/rtems-sis/-/archive/2.30/rtems-sis-2.30.tar.bz2
       sha512: eVE6w76AqW4aPsixlZOj8VV7e2RAsXPp+jbS4WHWubgSK8DXHKyuM9aiaM4mh1rpsU/8U1y3u00X6Xj7U/82Vg==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source sis -q -n rtems-sis-2.30
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd rtems-sis-2.30
  ac_prefix=/home/tester/rtems-cron-6/tools/6
  if test "x86_64-freebsd13.2" != "x86_64-freebsd13.2" ; then
  CFLAGS_FOR_BUILD="-g -O2 -Wall"
  fi
  export CFLAGS CFLAGS_FOR_BUILD CC
  if test "riscv-rtems6" != "" ; then
  SIS_PREFIX="riscv-rtems6-"
  fi
  CFLAGS="$SB_CFLAGS"  ./configure  --program-prefix="$SIS_PREFIX"  --prefix=${ac_prefix}
  gmake -j 8 all
  unset CFLAGS_FOR_BUILD
  cd ${build_top}
 Install:
  build_top=$(pwd)
  export PATH="/home/tester/rtems-cron-6/tools/6/bin:${PATH}"
  /bin/rm -rf $SB_BUILD_ROOT
  cd rtems-sis-2.30
  gmake DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}


More information about the build mailing list