[rtems-test] powerpc/psim: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:635 Failed:9 Timeout:1 Test-Too-long:0 Invalid:0 Wrong:0
OAR Tester for CentOS 8 Stream
rtems-tester at oarcorp.com
Wed Nov 13 12:49:33 UTC 2024
Testing time : 0:12:08.653242
Average test time: 0:00:01.076297
Host
====
Linux-4.18.0-553.6.1.el8.x86_64-x86_64-with-glibc2.28 (Linux VM-CentOSStream8.rtems.com 4.18.0-553.6.1.el8.x86_64 #1 SMP Thu May 30 04:13:58 UTC 2024 x86_64 x86_64)
Configuration
=============
Version: 6.0.0.30fc123f8d
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
Summary
=======
Passed: 635
Failed: 9
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 1
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 677
Failures:
dl06.exe
fsimfsgeneric01.exe
jffs2_fsrdwr.exe
jffs2nand_fsrdwr.exe
psx12.exe
psxkey08.exe
regulator01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
ts-userext.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux VM-CentOSStream8.rtems.com 4.18.0-553.6.1.el8.x86_64 #1 SMP Thu May 30 04:13:58 UTC 2024 x86_64
Python: 3.9.19 (main, May 16 2024, 11:40:09) [GCC 8.5.0 20210514 (Red Hat 8.5.0-22)]
Host: Linux-4.18.0-553.6.1.el8.x86_64-x86_64-with-glibc2.28 (Linux VM-CentOSStream8.rtems.com 4.18.0-553.6.1.el8.x86_64 #1 SMP Thu May 30 04:13:58 UTC 2024 x86_64 x86_64)
[ 1/677] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/677] p:4 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:10.926359 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.30fc123f8d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
=> test end: FSIMFSGENERIC 1
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.30fc123f8d
[ 16/677] p:7 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[ 36/677] p:22 f:1 u:0 e:2 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2_fsrdwr.exe
Result: failed
Time: 0:00:05.690409 jffs2_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrdwr.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrdwr.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrdwr.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrdwr.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2_fsrdwr.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSRDWR JFFS2
] *** BEGIN OF TEST FSRDWR JFFS2 ***
] *** TEST VERSION: 6.0.0.30fc123f8d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] Initializing filesystem JFFS2
] test case: read_write_test
] <4>JFFS2: Error: jffs2_decompress returned 1
] ../../../testsuites/fstests/fsrdwr/init.c: 140 n == len
=> test end: FSRDWR JFFS2
] [ RTEMS shutdown ]
[ 37/677] p:23 f:1 u:0 e:2 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2_fsrename.exe
<<skipping passes>>
[ 50/677] p:31 f:2 u:0 e:6 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2nand_fsrdwr.exe
Result: failed
Time: 0:00:05.853863 jffs2nand_fsrdwr.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fsrdwr.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fsrdwr.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fsrdwr.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fsrdwr.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/jffs2nand_fsrdwr.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSRDWR JFFS2 NAND
] *** BEGIN OF TEST FSRDWR JFFS2 NAND ***
] *** TEST VERSION: 6.0.0.30fc123f8d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] Initializing filesystem JFFS2 NAND
] test case: read_write_test
] <4>JFFS2: Error: jffs2_decompress returned 1
] ../../../testsuites/fstests/fsrdwr/init.c: 140 n == len
=> test end: FSRDWR JFFS2 NAND
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.30fc123f8d
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] executing thread ID: 0x0a010002
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[ 51/677] p:32 f:2 u:0 e:6 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: jffs2nand_fsrename.exe
<<skipping passes>>
[134/677] p:98 f:3 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:05.746619 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.30fc123f8d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
=> test end: libdl (RTL) 6
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.30fc123f8d
[135/677] p:99 f:3 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[219/677] p:177 f:5 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:05.804749 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.30fc123f8d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
=> test end: PSX 12
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.30fc123f8d
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] executing thread ID: 0x0b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 05]
[220/677] p:178 f:5 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[276/677] p:233 f:6 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:10.553985 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.30fc123f8d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
=> test end: PSXKEY 8
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.30fc123f8d
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
[277/677] p:235 f:6 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psxkey09.exe
<<skipping passes>>
[662/677] p:614 f:9 u:6 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: ts-userext.exe
Result: timeout
Time: 0:03:09.782484 ts-userext.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/validation/ts-userext.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TestsuitesUserext
] *** BEGIN OF TEST TestsuitesUserext ***
] *** TEST VERSION: 6.0.0.30fc123f8d
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] A:TestsuitesUserext
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB d82e3f433ba1441dc97e9d3c78eb0eb93212ed16, Newlib 1b3dcfd)
] S:Version:6.0.0.30fc123f8d
] S:BSP:psim
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:FxbUPMFAfdnPCU2b0Y4l-hl4WMdj1U-2DWddZSVVsUA=
] S:RTEMS_DEBUG:1
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:RtemsUserextValUserext
=> Program
=> received signal SIGINT, Interrupt.
=> _Timecounter_Windup (new_boottimebin=new_boottimebin at entry=0x0 <_Timecounter_Tick_simple>, lock_context=lock_context at entry=0x76c40 <_ISR_Stack_area_begin+8224>) at ../../../cpukit/score/src/kern_tc.c:1739
=> 1739 bintime_add(&bt, &th->th_boottime);
=> bt
=> #0 _Timecounter_Windup (new_boottimebin=new_boottimebin at entry=0x0 <_Timecounter_Tick_simple>, lock_context=lock_context at entry=0x76c40 <_ISR_Stack_area_begin+8224>) at ../../../cpukit/score/src/kern_tc.c:1739
=> #1 0x00008e9c in tc_windup (new_boottimebin=0x0 <_Timecounter_Tick_simple>) at ../../../cpukit/score/src/kern_tc.c:1654
=> #2 _Timecounter_Tick () at ../../../cpukit/score/src/kern_tc.c:2337
=> #3 0x0000ab34 in rtems_timecounter_tick () at ../../../cpukit/include/rtems/timecounter.h:101
=> #4 clockHandler () at ../../../bsps/powerpc/shared/clock/clock-ppc-dec.c:118
=> #5 0x0000ad1c in clockIsr (unused=<optimized out>) at ../../../bsps/powerpc/shared/clock/clock-ppc-dec.c:164
=> #6 0x0000cb84 in bsp_irq_dispatch_list_base (sentinel=0x0 <BSP_disable_irq_at_pic>, irq=15, tbl=<optimized out>) at ../../../bsps/powerpc/include/bsp/irq_supp.h:89
=> #7 bsp_irq_dispatch_list (sentinel=0x0 <BSP_disable_irq_at_pic>, irq=15, tbl=<optimized out>) at ../../../bsps/powerpc/include/bsp/irq_supp.h:119
=> #8 C_dispatch_irq_handler (frame=<optimized out>, excNum=<optimized out>) at ../../../bsps/powerpc/shared/irq/openpic_i8259_irq.c:244
=> #9 0x0000ee14 in wrap_change_msr_done_std () at ../../../bsps/powerpc/shared/exceptions/ppc_exc.S:129
=> disconnect
=> You can't do that when your target is `sim'
=> Quit
=> quit
=> test end: TestsuitesUserext
] *** TIMEOUT TIMEOUT
[663/677] p:615 f:9 u:6 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: ts-validation-0.exe
<<skipping passes>>
[677/677] p:628 f:9 u:6 e:23 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: ts-validation-tls-1.exe
Passed: 635
Failed: 9
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 1
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 677
Failures:
dl06.exe
fsimfsgeneric01.exe
jffs2_fsrdwr.exe
jffs2nand_fsrdwr.exe
psx12.exe
psxkey08.exe
regulator01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
ts-userext.exe
Average test time: 0:00:01.076297
Testing time : 0:12:08.653242
More information about the build
mailing list