[rtems-test] powerpc/psim: RTEMS_POSIX_API: Passed:615 Failed:12 Timeout:16 Test-Too-long:0 Invalid:0 Wrong:0
OAR Tester for CentOS 7
rtems-tester at oarcorp.com
Mon Oct 14 17:09:50 UTC 2024
Testing time : 0:25:33.216318
Average test time: 0:00:02.271431
Host
====
Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
Configuration
=============
Version: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
Build : RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
Summary
=======
Passed: 615
Failed: 12
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 16
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 675
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxinttypes01.exe
psxkey08.exe
psxndbm01.exe
psxreaddir.exe
sp11.exe
sp24.exe
spratemon_err01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
mdosfs_fsstatvfs.exe
psxkey04.exe
psxtmmutexattr01.exe
psxtmthread05.exe
sp18.exe
sp21.exe
sp22.exe
sp43.exe
sp51.exe
sp60.exe
spfifo04.exe
spintrcritical12.exe
spintrcritical13.exe
spintrcritical16.exe
spqreslib.exe
ts-userext.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64
Python: 2.7.5 (default, Nov 14 2023, 16:14:06) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]
Host: Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
[ 1/675] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/675] p:4 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:06.451964 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
=> test end: FSIMFSGENERIC 1
] [ RTEMS shutdown ]
[ 16/675] p:10 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[ 69/675] p:47 f:1 u:0 e:10 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mdosfs_fsstatvfs.exe
Result: timeout
Time: 0:03:10.033564 mdosfs_fsstatvfs.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsstatvfs.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsstatvfs.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsstatvfs.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsstatvfs.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsstatvfs.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSSTATVFS DOSFS
] *** BEGIN OF TEST FSSTATVFS DOSFS ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] Initializing filesystem DOSFS
=> test end: FSSTATVFS DOSFS
] *** TIMEOUT TIMEOUT
[ 70/675] p:48 f:1 u:0 e:10 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mdosfs_fstime.exe
<<skipping passes>>
[134/675] p:104 f:1 u:0 e:18 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:05.875616 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
=> test end: libdl (RTL) 6
] [ RTEMS shutdown ]
[135/675] p:105 f:1 u:0 e:18 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[217/675] p:177 f:2 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:08.452572 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
=> test end: PSX 12
] [ RTEMS shutdown ]
[218/675] p:178 f:2 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[265/675] p:225 f:3 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxinttypes01.exe
Result: failed
Time: 0:00:06.540776 psxinttypes01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxinttypes01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxinttypes01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxinttypes01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxinttypes01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxinttypes01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXINTTYPE 01
] *** BEGIN OF TEST PSXINTTYPE 01 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] strtoimax Testcases....
] Valid Inputs - Positive Number
] Final string pointed by endptr
] Valid Inputs - Negative Number
] Final string pointed by endptr
] Valid Input - Positive Number - Number out of Range
] Valid Input - Negative Number - Number out of Range
] Invalid Input - Invalid base - Use base = 40
] strtoumax Testcases....
] Valid Inputs - Positive Number
] Final string pointed by endptr
] Valid Inputs - Negative Number
] Final string pointed by endptr
] Valid Input - Positive Number - Number out of Range
] Valid Input - Negative Number - Number out of Range
] Invalid Input - Invalid base - Use base = 40
] wcstoimax Testcasesb3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[266/675] p:225 f:3 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxitimer.exe
<<skipping passes>>
[270/675] p:228 f:4 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxkey04.exe
Result: timeout
Time: 0:03:10.294646 psxkey04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey04.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey04.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey04.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey04.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey04.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 4
] *** BEGIN OF TEST PSXKEY 4 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] Init - pthread_key_create - OK
] Init - create - OK
] Init - sleep - let thread run - OK
] Test_Thread 1 - pthread_setspecific - OK
] Test_Thread 1 - sleep - let thread 2 run - OK
] Test_Thread 2 - pthread_setspecific - OK
=> test end: PSXKEY 4
] *** TIMEOUT TIMEOUT
[271/675] p:229 f:4 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxkey05.exe
<<skipping passes>>
[274/675] p:232 f:4 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:10.673692 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
=> test end: PSXKEY 8
] [ RTEMS shutdown ]
[275/675] p:233 f:4 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxkey09.exe
<<skipping passes>>
[284/675] p:242 f:5 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxndbm01.exe
Result: failed
Time: 0:00:09.830038 psxndbm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXNDBM 01
] *** BEGIN OF TEST PSXNDBM 01 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] Open Database.
] Store Records in Database.
] Fetch Records from Database and check.
] Close Database.
] Testcases for 'dbm_open()'.
] Use 'O_CREAT | O_EXCL' to open existing file and confirm error.
] @n"
] Use path name larger than '{PATH_MAX}-3 bytes.' and confirm er
=> test end: PSXNDBM 01
] [ RTEMS shutdown ]
[285/675] p:242 f:5 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxobj01.exe
<<skipping passes>>
[291/675] p:247 f:6 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxreaddir.exe
Result: failed
Time: 0:00:38.317361 psxreaddir.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXREADDIR
] *** BEGIN OF TEST PSXREADDIR ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] chdir to the root directory
] chdir() status : 0
] Creating a series of directories under /
] Creating directory: a 0 0 Success
] Creating directory: b 0 0 Success
] Creating directory: c 0 0 Success
] Creating directory: d reate aq
] Create ar
] Open /many and print the directory
] name inode offset reclen type
] a 225368 0 280 0x0118
] b 225472 280 280 0x0118
] c 225576 560 280 0x0118
] d 225680 840 280 0x0118
] e 225784 1120 280 0x0118
] f 225888 1400 280 0x0118
] g 225992 1680 280 0x0118
] h 226096 1960 280 0x0118
] i 226200 2240 280 0x0118
] j 226304 2520 280 0x0118
] k 226408 2800 280 0x0118
] l 226512 3080 280 0x0118
] m 226616 3360 280 0x0118
] n 226720 3640 280 0x0118
] o 226824 3920 280 0x0118
] p 226928 4200 280 0x0118
] q 227032 4480 280 0x0118
] r 227136 4760 280 0x0118
] s 227240 5040 280 0x0118
] t 227344 5320 280 0x0118
] u 227448 5600 280 0x0118
] v 227552 5880 280 0x0118
] w 227656 6160 280 0x0118
] x 227760 6440 280 0x0118
] y 227864 6720 280 0x0118
] z 227968 7000 280 0x0118
] aa 228072 7280 280 0x0118
] ab 228176 7560 280 0x0118
] ac 228280 7840 280 0x0118
] ad 228384 8120 280 0x0118
] ae 228488 8400 280 0x0118
] af 228592 8680 280 0x0118
] ag 228696 8960 280 0x0118
] ah 228800 9240 280 0x0118
] ai 228904 9520 280 0x0118
] aj 229008 9800 280 0x0118
] ak 229112 10080 280 0x0118
] al 229216 10360 280 0x0118
] am 229320 10640 280 0x0118
] an 229424 10920 280 0x0118
] ao 229528 11200 280 0x0118
] ap 229632 11480 280 0x0118
] aq 229736 11760 280 0x0118
] ar 229840 12040 280 0x0118
] open /b/my_file
] scandir a file status: -1
] Open /b/new_file
] fcntl F_SETFD should return 0
] fcntl F_SETFD should return 1
] fcntl F_DUPFD should return a file descriptor
] close duplicate should return 0
] fcntl F_GETFL returns current flags
] fcntl F_GETFL returned 0x0
] fcntl F_SETFL to add O_APPEND and O_NONBLOCK
] fcntl F_GETFL return current flags to see changes
] fcntl F_GETFL returned 0x4008
] fcntl F_GETLK should return -1
] fcntl F_SETLK should return -1
] fcntl F_SETLKW should return -1
] fcntl F_SETOWN should return -1
] fcntl F_GETOWN should return -1
] fcntl invalid argument should return -1
] Status -1
] close should return 0
] " "
] opendir, readdir and closedir /b/my_fireclen type
] y 224744 0 280 0x0118
] z 224840 280 280 0x0118
] x 224936 560 280 0x0118
] Opening directory /c/y
] name inode offset reclen type
] a3333 225032 0 280 0x0118
] j123 225128 280 280 0x0118
] LSEEK to the start of the open directory
] name inode offset reclen type
] dev 224024 0 280 0x0118
] a 224168 280 280 0x0118
] b 224264 560 280 0x0118
] c 224360 840 280 0x0118
] d 224456 1120 280 0x0118
] e 224552 1400 280 0x0118
] f 224648 1680 280 0x0118
] many 225224 1960 280 0x0118
] Rewinding directory
] name inode offset reclen type
] dev 224024 0 280 0x0118
] a 224168 280 280 0x0118
] b 224264 560 280 0x0118
] c 224360 840 280 0x0118
] d 224456 1120 280 0x0118
] e 224552 1400 280 0x0118
] f 224648 1680 280 0x0118
] many 225224 1960 280 0x0118
] Seek directory
] telldir() should report only sizeof(struct dirent) increments
] in position. Sizeof(struct dirent): 280
] seeked to 0 -- currently at 1
] seeked to 70 -- currently at 2
] seeked to 140 -- currently at 3
] Send seekdir a NULL pointer
] Closing directory
] SCANDIR TEST
] selection rule 1
] scanning for any entry under directory /c
] SCANDIR SELECT1 accepts nodename: y
] SCANDIR SELECT1 accepts nodename: z
] SCANDIR SELECT1 accepts nodename: x
] scandir status: 3
] Selected Node Name: y
] Selected Node Name: z
] Selected Node Name: x
] selection rule 2
] scanning for any entry under directory /c whose name = y
] SCANDIR SELECT accepted nodename: y
] SCANDIR SELECT rejected nodename: z
] SCANDIR SELECT rejected nodename: x
] scandir status: 1
] Selected Node Name: y
] SCANDIR with sorting
] selection rule 1
] scanning for any entry under directory /c
] sort in ascending order
] SCANDIR SELECT1 accepts nodename: y
] SCANDIR SELECT1 accepts nodename: z
] SCANDIR SELECT1 accepts nodename: x
] scandir status: 3
] Selected and Sorted Node Name: x
] Selected and Sorted Node Name: y
] Selected and Sorted Node Name: z
] SCANDIR with sorting
] selection rule 1
] scanning for any entry under directory /c
] sort in descending order
] SCANDIR SELECT1 accepts nodename: y
] SCANDIR SELECT1 accepts nodename: z
] SCANDIR SELECT1 accepts nodename: x
] scandir status: 3
] Selected and Sorted Node Name: z
] Selected and Sorted Node Name: y
] Selected and Sorted Node Name: x
] unlink /b/my_file should return 0
] Validate readdir across mount point
] name inode offset reclen type
] should_be_hidden 230672 0 280 0x0118
] Attempting to mount IMFS file system at /imfs
] create /imfs/testdir and /imfs/testdir/testsubdir
] name uting thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[292/675] p:248 f:6 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxrwlock01.exe
<<skipping passes>>
[349/675] p:304 f:7 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxtmmutexattr01.exe
Result: timeout
Time: 0:03:11.282337 psxtmmutexattr01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutexattr01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutexattr01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutexattr01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutexattr01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmmutexattr01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXTMMUTEXATTR01
] *** BEGIN OF TEST PSXTMMUTEXATTR01 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] pthread_mutexattr_init: only case - 23
] pthread_mutexattr_setprioceiling: only case - 15
] pthread_mutexattr_getprioceiling: only case - 18
] pthread_mutexattr_setprotocol: only case - 17
] pthread_mutexattr_getprotocol: only case - 18
=> test end: PSXTMMUTEXATTR01
] *** TIMEOUT TIMEOUT
[350/675] p:306 f:7 u:4 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: psxtmnanosleep01.exe
<<skipping passes>>
[371/675] p:325 f:7 u:4 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: psxtmthread05.exe
Result: timeout
Time: 0:03:05.925951 psxtmthread05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread05.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread05.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread05.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtmtests/psxtmthread05.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> test end: None
] *** TIMEOUT TIMEOUT
[372/675] p:326 f:7 u:4 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: psxtmthread06.exe
<<skipping passes>>
[398/675] p:350 f:7 u:6 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: sp11.exe
Result: failed
Time: 0:00:22.433542 sp11.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp11.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp11.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp11.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp11.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp11.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 11
] *** BEGIN OF TEST SP 11 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] TA1 - rtems_event_send - send RTEMS_EVENT_16 to TA2
] TA1 - rtems_event_receive - waiting forever on RTEMS_EVENT_14 and RTEMS_EVENT_15
] TA2 - rtems_event_receive - waiting forever on RTEMS_EVENT_16
] TA2 - RTEMS_EVENT_16 received - eventout => 00010000
] TA2 - rtems_event_send - send RTEMS_EVENT_14 and RTEMS_EVENT_15 to TA1
] TA2 - rtems_event_receive - RTEMS_EVENT_17 or RTEMS_EVENT_18 - forever and ANY
] TA1 - RTEMS_EVENT_14 and RTEMS_EVENT_15 received - eventout => 0000c000
] TA1 - rtems_event_send - send RTEMS_EVENT_18 to TA2
] TA1 - rtems_event_receive - waiting with 10 second timeout on RTEMS_EVENT_14
] TA2 - RTEMS_EVENT_17 or RTEMS_EVENT_18 received - eventout => 00040000
] TA2 - rtems_event_send - send RTEMS_EVENT_14 to TA1
] TA2 - rtems_clock_set - 08:15:00 02/12/1988
] TA2 - rtems_event_send - sending RTEMS_EVENT_10 to self after 4 seconds
] TA2 - rtems_event_receive - waiting forever on RTEMS_EVENT_10
] TA1 - RTEMS_EVENT_14 received - eventout => 00004000
] TA1 - rtems_event_send - send RTEMS_EVENT_19 to TA2
] TA1 - rtems_clock_get_tod - 08:15:00 02/12/1988
] TA1 - rtems_event_send - send RTEMS_EVENT_18 to self after 5 seconds
] TA1 - rtems_event_receive - waiting forever on RTEMS_EVENT_18
] TA2 - RTEMS_EVENT_10 received - eventout => 00000400
] TA2 - rtems_clock_get_tod - 08:15:04 02/12/1988
] TA2 - rtems_event_receive - RTEMS_PENDING_EVENTS
] TA2 - eventout => 00080000
] TA2 - rtems_event_receive - RTEMS_EVENT_19 - RTEMS_NO_WAIT
] TA2 - RTEMS_EVENT_19 received - eventout => 00080000
] TA2 - rtems_task_delete - deletes self
] TA1 - RTEMS_EVENT_18 received - eventout => 00040000
] TA1 - rtems_clock_get_tod - 08:15:04 02/12/1988
] TA1 - rtems_event_send - send RTEMS_EVENT_3 to self
] TA1 - rtems_event_receive - RTEMS_EVENT_3 or RTEMS_EVENT_22 - NO_WAIT and ANY
] TA1 - RTEMS_EVENT_3 received - eventout => 00000008
] TA1 - rtems_event_send - send RTEMS_EVENT_4 to self
] TA1 - rtems_event_receive - RTEMS_EVENT_4 or RTEMS_EVENT_5 - forever and ANY
] TA1 - RTEMS_EVENT_4 received - eventout => 00000010
] TA1 - rtems_event_send - send RTEMS_EVENT_18 to self after 5 seconds
] TA1 - rtems_timer_cancel - cancelling timer for event RTEMS_EVENT_18
] TA1 - rtems_event_send - send RTEMS_EVENT_8 to self after 60 seconds
] TA1 - rtems_event_send - send RTEMS_EVENT_9 to self after 60 seconds
] TA1 - rtems_event_send - send RTEMS_EVENT_10 to self after 60 seconds
] TA1 - rtems_timer_cancel - cancelling timer for event RTEMS_EVENT_8
] TA1 - rtems_clock_set - 08:15:00 02/12/1988
] TA1 - rtems_event_send - send RTEMS_EVENT_1 every second
] TA1 - RTEMS_EVENT_1 received - eventout => 00000002 - at 08:15:00 02/12/1988
] TA1 - RTEMS_EVENT_1 received - eventout => 00000002 - at 08:15:01 02/12/1988
] TA1 - RTEMS_EVENT_1 received - eventout => 00000002 - at 08:15:02 02/12/1988
] TA1 - rtems_timer_cancel - cancelling timer for event RTEMS_EVENT_1
] TA1 - rtems_event_send - sending RTEMS_EVENT_11 to self in 1 day
] TA1 - rtems_event_send - sending RTEMS_EVENT_11 to self in 1 day
] TA1 - rtems_event_send - sending RTEMS_EVENT_11 to self in 2 days
] TA1 - rtems_timer_cancel - cancelling RTEMS_EVENT_11 to self in 1 day
] TA1 - rtems_timer_cancel - cancelling RTEMS_EVENT_11 to self in 2 days
] TA1 - rtems_event_send - resending RTEMS_EVENT_11 to self in 2 days
] TA1 - rtems_clock_set - 08:15:02 02/15/1988
] TA1 - rtems_event_receive - waiting forever on RTEMS_EVENT_11
] TA1 - RTEMS_EVENT_11 received - eventout => 00000800
] TA1 - rtems_event_send/rtems_event_receive combination
] @"
] TA1 - rtems_clock_set - 08:15:00 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] executing thread ID: 0x0a010002
] executing thread name: TA1
=> [Inferior 1 (process 42000) exited with code 05]
[399/675] p:351 f:7 u:6 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: sp12.exe
<<skipping passes>>
[405/675] p:356 f:8 u:6 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: sp18.exe
Result: timeout
Time: 0:03:08.884838 sp18.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp18.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp18.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp18.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp18.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp18.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 18
] *** BEGIN OF TEST SP 18 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] Init - rtems_task_create - Unsatisfied on Extensions
=> test end: SP 18
] *** TIMEOUT TIMEOUT
[406/675] p:357 f:8 u:6 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: sp19.exe
<<skipping passes>>
[409/675] p:360 f:8 u:6 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: sp21.exe
Result: timeout
Time: 0:03:12.233365 sp21.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp21.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp21.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 21
] *** BEGIN OF TEST SP 21 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] ----- TESTING THE NULL DRIVER CHECKS -----
] rtems_io_initialize - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_open - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_close - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_read - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_write - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_control - NULL DRIVER RTEMS_SUCCESSFUL
] ----- TESTING THE I/O MANAGER DIRECTIVES -----
] rtems_io_initialize - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_open - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_close - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_read - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_write - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_control - STUB DRIVER RTEMS_SUCCESSFUL
] ----- RETURNING INVALID MAJOR NUMBER -----
] rtems_io_initialize - RTEMS_INVALID_NUMBER
] rtems_io_open - RTEMS_INVALID_NUMBER
] ----- EXERCISE DRIVER REGISTER -----
] rtems_io_register_driver - RTEMS_INVALID_ADDRESS - NULL registered
] rtems_io_register_driver - RTEMS_INVALID_ADDRESS - NULL device
] @"D(gdb)
=> test end: SP 21
] *** TIMEOUT TIMEOUT
[410/675] p:361 f:8 u:6 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: sp22.exe
Result: timeout
Time: 0:03:12.917085 sp22.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp22.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp22.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp22.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp22.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp22.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 22
] *** BEGIN OF TEST SP 22 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] INIT - rtems_timer_create - creating timer 1
] INIT - timer 1 has id (0x12010001)
] TA1 - rtems_timer_ident - identing timer 1
] TA1 - timer 1 has id (0x12010001)
] TA1 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA1 - rtems_timer_fire_after - timer 1 in 3 seconds
] TA1 - rtems_task_suspend( RTEMS_SELF )
] TA1 - rtems_clock_get_tod - 09:00:02 12/31/1988
] TA1 - rtems_timer_fire_after - timer 1 in 3 seconds
] TA1 - rtems_task_wake_after - 1 second
] TA1 - rtems_clock_get_tod - 09:00:03 12/31/1988
] TA1 - rtems_timer_reset - timer 1
] TA1 - rtems_task_suspend( RTEMS_SELF )
] TA1 - rtems_clock_get_tod - 09:00:06 12/31/1988
] TA1 - rtems_timer_fire_after - timer 1 in 3 seconds
] TA1 - rtems_timer_cancel - timer 1
] TA1 - rtems_clock_get_tod - 09:00:07 12/31/1988
] TA1 - rtems_timer_fire_when - timer 1 in 3 seconds
] TA1 - rtems_task_suspend( RTEMS_SELF )
] TA1 - rtems_clock_get_tod - 09:00:10 12/31/1988
] TA1 - rtems_timer_fire_when - timer 1 in 3 seconds
] TA1 - rtems_task_wake_after - 1 second
=> test end: SP 22
] *** TIMEOUT TIMEOUT
[411/675] p:363 f:8 u:6 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: sp23.exe
[412/675] p:363 f:8 u:6 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: sp24.exe
Result: failed
Time: 0:00:04.276022 sp24.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp24.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp24.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp24.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp24.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp24.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 24
] *** BEGIN OF TEST SP 24 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] TA1 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA2 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA3 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA1 - rtems_clock_get_tod - 09:00:04 12/31/1988
] @"=thread-exited,id="1",group-id="i1"
[413/675] p:363 f:9 u:6 e:22 I:0 B:3 t:2 L:0 i:0 W:0 | powerpc/psim: sp25.exe
<<skipping passes>>
[429/675] p:377 f:9 u:6 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: sp43.exe
Result: timeout
Time: 0:03:22.249536 sp43.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp43.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp43.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp43.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp43.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp43.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 43
] *** BEGIN OF TEST SP 43 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] RTEMS Version: rtems-6.0.0 (PowerPC/Generic (classic FPU)/psim)
] RTEMS Copyright Notice: Copyright (C) 1989, 2021 RTEMS Project and contributors
] rtems_object_get_classic_name - INVALID_ADDRESS
] rtems_object_get_classic_name - INVALID_ID (bad index)
] rtems_object_get_classic_name - INVALID_ID (unallocated index)
] rtems_object_get_classic_name - INVALID_ID (bad API)
] UI1 - name returned by rtems_object_get_classic_name for Init task id
] UI1 - name returned by rtems_object_get_classic_name for RTEMS_SELF
] TEMP - rtems_build_name for TEMP
] rtems_object_get_name - bad id for class with instances
] rtems_object_get_name - bad id for class without instances
] rtems_object_get_name - bad length
] rtems_object_get_name - bad pointer
] rtems_object_get_name returned (UI1 ) for init task id
] rtems_object_get_name returned (UI1 ) for RTEMS_SELF
] rtems_object_set_name - INVALID_ADDRESS
] rtems_object_set_name - INVALID_ID (bad API)
] rtems_object_set_name - INVALID_ID (bad index)
] rtems_object_set_name - change name of init task to (New1)
] New1 - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (New1) for init task
] rtems_object_set_name - change name of init task to (Ne1)
] Ne1 - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (Ne1 ) for init task
] rtems_object_set_name - change name of init task to (N1)
] N1 - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (N1 ) for init task
] rtems_object_set_name - change name of init task to (N)
] N - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (N ) for init task
] rtems_object_set_name - change name of init task to ()
] - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned ( ) for init task
] rtems_object_set_name - change name of init task to (N-0x07-0x09-1)
] N**1 - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (N**1) for init task
] rtems_object_set_name - change name of init task to (SELF)
] SELF - name returned by rtems_object_get_classic_name
] rtems_object_get_name returned (SELF) for init task
] rtems_object_get_name returned (SELF) for init task id
] rtems_build_id - build an id to match init task
] rtems_object_id_get_api - OK
] rtems_object_id_get_class - OK
] rtems_object_id_get_node - OK
] rtems_object_id_get_index - OK
] rtems_object_id_api_minimum returned 1
] rtems_object_id_api_maximum returned 3
] rtems_object_api_minimum_class(0) returned -1
] rtems_object_api_maximum_class(0) returned 0
] rtems_object_api_minimum_class(0) returned -1
] rtems_object_api_maximum_class(0) returned 0
] rtems_object_api_minimum_class(255) returned -1
] rtems_object_api_maximum_class(255) returned 0
] rtems_object_api_minimum_class(OBJECTS_INTERNAL_API) returned 1
] rtems_object_api_maximum_class(OBJECTS_INTERNAL_API) returned 1
] rtems_object_api_minimum_class(OBJECTS_CLASSIC_API) returned 1
] rtems_object_api_maximum_class(OBJECTS_CLASSIC_API) returned 10
] rtems_object_get_api_name(0) = BAD CLASS
] rtems_object_get_api_name(255) = BAD CLASS
] rtems_object_get_api_name(INTERNAL_API) = Internal
] rtems_object_get_api_name(CLASSIC_API) = Classic
] rtems_object_get_api_class_name(0, RTEMS_TASKS) = BAD API
] rtems_object_get_api_class_name(CLASSIC_API, 0) = BAD CLASS
] rtems_object_get_api_class_name(INTERNAL_API, THREADS) = Thread
] rtems_object_get_api_class_name(CLASSIC_API, RTEMS_BARRIERS) = Barrier
] rtems_object_get_class_information - INVALID_ADDRESS
] rtems_object_get_class_information - INVALID_NUMBER (bad API)
] rtems_object_get_class_information - INVALID_NUMBER (api=0xff)
] rtems_object_get_class_information - INVALID_NUMBER (class=0)
] rtems_object_get_class_information - INVALID_NUMBER (class too high)
] rtems_object_get_class_information - Classic Tasks - OK
] Classic API Task Information
] minimum id : 0x0a010001 maximum id: 0x0a010002
] maximum : 2 available : 1
] auto_extend : no
] rtems_object_get_class_information - Classic Timers - OK
] Classic API Timer Information
] minimum id : 0x12010001 maximum id: 0x12010001
] maximum : 1 available : 1
] auto_extend : no
] rtems_task_set_priority - use valid Idle thread id
] rtems_task_set_priority - clobber internal thread class info
=> test end: SP 43
] *** TIMEOUT TIMEOUT
[430/675] p:378 f:9 u:6 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: sp44.exe
<<skipping passes>>
[437/675] p:385 f:9 u:6 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: sp51.exe
Result: timeout
Time: 0:03:09.169709 sp51.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp51.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp51.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp51.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp51.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp51.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 51
] *** BEGIN OF TEST SP 51 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] Create semaphore - priority ceiling unlocked - invalid ceiling
] Create semaphore - priority ceiling locked - violate ceiling
] Create semaphore - priority ceiling unlocked
] Obtain semaphore -- violate ceiling
] Release semaphore we did not obtain
=> test end: SP 51
] *** TIMEOUT TIMEOUT
[438/675] p:386 f:9 u:6 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: sp52.exe
<<skipping passes>>
[446/675] p:394 f:9 u:6 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: sp60.exe
Result: timeout
Time: 0:03:08.311861 sp60.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp60.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp60.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp60.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp60.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 60
] *** BEGIN OF TEST SP 60 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] Init - rtems_rate_monotonic_create - first period
] Init - rtems_rate_monotonic_create - second period
] Init - rtems_rate_monotonic_period - short period
] Init - rtems_rate_monotonic_period - long period initiated
=> test end: SP 60
] *** TIMEOUT TIMEOUT
[447/675] p:395 f:9 u:6 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: sp62.exe
<<skipping passes>>
[513/675] p:455 f:10 u:6 e:22 I:0 B:3 t:9 L:0 i:0 W:0 | powerpc/psim: spfifo04.exe
Result: timeout
Time: 0:03:10.964787 spfifo04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spfifo04.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPFIFO 4
] *** BEGIN OF TEST SPFIFO 4 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] Init - Creating /fifo
] Init - Opening /fifo in readonly, non-blocking mode
] Init - Attempt to lseek on fifo -- Expected ESPIPE
] Init - ioctl: FIONBIO -- Expected EFAULT
] Init - ioctl: FIONBIO -- OK
] Init - ioctl: FIONBIO -- OK
=> test end: SPFIFO 4
] *** TIMEOUT TIMEOUT
[514/675] p:456 f:10 u:6 e:22 I:0 B:3 t:9 L:0 i:0 W:0 | powerpc/psim: spfifo05.exe
<<skipping passes>>
[531/675] p:472 f:10 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: spintrcritical12.exe
Result: timeout
Time: 0:03:11.220327 spintrcritical12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spintrcritical12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spintrcritical12.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPINTRCRITICAL 12
] *** BEGIN OF TEST SPINTRCRITICAL 12 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] A:SPINTRCRITICAL 12
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] S:Version:6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] S:BSP:psim
] S:BuildLabel:DEFAULT
=> test end: SPINTRCRITICAL 12
] *** TIMEOUT TIMEOUT
[532/675] p:473 f:10 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: spintrcritical13.exe
Result: timeout
Time: 0:03:10.679880 spintrcritical13.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spintrcritical13.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spintrcritical13.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical13.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical13.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical13.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPINTRCRITICAL 13
] *** BEGIN OF TEST SPINTRCRITICAL 13 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] A:SPINTRCRITICAL 13
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] S:Version:6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] S:BSP:psim
] S:BuildLabel:DEFAULT
=> test end: SPINTRCRITICAL 13
] *** TIMEOUT TIMEOUT
[533/675] p:474 f:10 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: spintrcritical14.exe
<<skipping passes>>
[535/675] p:477 f:10 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: spintrcritical16.exe
Result: timeout
Time: 0:03:11.339763 spintrcritical16.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical16.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPINTRCRITICAL 16
] *** BEGIN OF TEST SPINTRCRITICAL 16 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] A:SPINTRCRITICAL 16
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] S:Version:6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] S:BSP:psim
] S:BuildLabel:DEFAULT
=> test end: SPINTRCRITICAL 16
] *** TIMEOUT TIMEOUT
[536/675] p:477 f:10 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: spintrcritical18.exe
<<skipping passes>>
[561/675] p:502 f:10 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: spqreslib.exe
Result: timeout
Time: 0:03:07.289179 spqreslib.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spqreslib.exe
=> test end: None
] *** TIMEOUT TIMEOUT
[562/675] p:503 f:10 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: spratemon_err01.exe
Result: failed
Time: 0:00:03.098612 spratemon_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spratemon_err01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spratemon_err01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spratemon_err01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spratemon_err01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spratemon_err01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP RATE MONOTONIC ERROR 01
] *** BEGIN OF TEST SP RATE MONOTONIC ERROR 01 ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] TA1 - rtems_task_create - 4 created - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_create - RTEMS_INVALID_ADDRESS
] TA1 - rtems_rate_monotonic_create - RTEMS_INVALID_NAME
] TA1 - rtems_rate_monotonic_create - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_create - RTEMS_TOO_MANY
] TA1 - rtems_rate_monotonic_ident - RTEMS_INVALID_NAME
] TA1 - rtems_rate_monotonic_period - RTEMS_INVALID_ID
] TA1 - rtems_rate_monotonic_period - local RTEMS_INVALID_ID
] TA1 - rtems_rate_monotonic_period(RTEMS_PERIOD_STATUS) - RTEMS_NOT_DEFINED
] TA1 - rtems_rate_monotonic_period - 100 ticks - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_period(RTEMS_PERIOD_STATUS) - RTEMS_SUCCESSFUL
] TA1 - rtems_rate_monotonic_period(RTEMS_PERIOD_STATUS) - RTEMS_TIMEOUT
] TA1 - rtems_rate_monotonic_get_statistics - RTEMS_INVALID_ADDRESS
] TA1 - rtems_rate_monotonic_get_status - RTEMS_INVALID_ADDRESS
] TA1 - rtems_rate_monotonic_get_status - RTEMS_INVALID_ID
] TA1 - rtems_rate_monotonic_cancel - RTEMS_INVALID_ID
] TA1 - rtems_rate_monotonic_cancel - local RTEMS_INVALID_ID
] @"n"U"
] TA1 - rtems_rate_monotoI1
=> [Inferior 1 (process 42000) exited normally]
[563/675] p:504 f:10 u:6 e:22 I:0 B:3 t:10 L:0 i:0 W:0 | powerpc/psim: sprbtree01.exe
<<skipping passes>>
[660/675] p:596 f:12 u:6 e:22 I:0 B:3 t:14 L:0 i:0 W:0 | powerpc/psim: ts-userext.exe
Result: timeout
Time: 0:03:08.754982 ts-userext.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/validation/ts-userext.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TestsuitesUserext
] *** BEGIN OF TEST TestsuitesUserext ***
] *** TEST VERSION: 6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] A:TestsuitesUserext
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 989ec6342f410f21e6585e4828a4c5f4f8da5e83, Newlib 1b3dcfd)
] S:Version:6.0.0.ad378dcaf72ce16cfd67bd39de1c71561d24bc32
] S:BSP:psim
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:FxbUPMFAfdnPCU2b0Y4l-hl4WMdj1U-2DWddZSVVsUA=
] S:RTEMS_DEBUG:0
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:RtemsUserextValUserext
=> Program
=> received signal SIGINT, Interrupt.
=> 0x0000623c in _Timecounter_Windup (new_boottimebin=new_boottimebin at entry=0x0 <_Timecounter_Tick_simple>, lock_context=lock_context at entry=0x723e0 <_ISR_Stack_area_begin+8224>) at ../../../cpukit/score/src/kern_tc.c:1711
=> 1711 th->th_offset_count += delta;
=> bt
=> #0 0x0000623c in _Timecounter_Windup (new_boottimebin=new_boottimebin at entry=0x0 <_Timecounter_Tick_simple>, lock_context=lock_context at entry=0x723e0 <_ISR_Stack_area_begin+8224>) at ../../../cpukit/score/src/kern_tc.c:1711
=> #1 0x00006540 in tc_windup (new_boottimebin=0x0 <_Timecounter_Tick_simple>) at ../../../cpukit/score/src/kern_tc.c:1654
=> #2 _Timecounter_Tick () at ../../../cpukit/score/src/kern_tc.c:2337
=> #3 0x00007a70 in rtems_timecounter_tick () at ../../../cpukit/include/rtems/timecounter.h:101
=> #4 clockHandler () at ../../../bsps/powerpc/shared/clock/clock-ppc-dec.c:118
=> #5 0x00007c58 in clockIsr (unused=<optimized out>) at ../../../bsps/powerpc/shared/clock/clock-ppc-dec.c:164
=> #6 0x000099a4 in bsp_irq_dispatch_list_base (sentinel=0x0 <BSP_disable_irq_at_pic>, irq=15, tbl=<optimized out>) at ../../../bsps/powerpc/include/bsp/irq_supp.h:89
=> #7 bsp_irq_dispatch_list (sentinel=0x0 <BSP_disable_irq_at_pic>, irq=15, tbl=<optimized out>) at ../../../bsps/powerpc/include/bsp/irq_supp.h:119
=> #8 C_dispatch_irq_handler (frame=<optimized out>, excNum=<optimized out>) at ../../../bsps/powerpc/shared/irq/openpic_i8259_irq.c:244
=> #9 0x0000bc34 in wrap_change_msr_done_std () at ../../../bsps/powerpc/shared/exceptions/ppc_exc.S:129
=> disconnect
=> You can't do that when your target is `sim'
=> Quit
=> quit
=> test end: TestsuitesUserext
] *** TIMEOUT TIMEOUT
[661/675] p:596 f:12 u:6 e:22 I:0 B:3 t:14 L:0 i:0 W:0 | powerpc/psim: ts-validation-0.exe
<<skipping passes>>
[675/675] p:610 f:12 u:6 e:22 I:0 B:3 t:14 L:0 i:0 W:0 | powerpc/psim: ts-validation-tls-1.exe
Passed: 615
Failed: 12
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 16
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 675
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxinttypes01.exe
psxkey08.exe
psxndbm01.exe
psxreaddir.exe
sp11.exe
sp24.exe
spratemon_err01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
mdosfs_fsstatvfs.exe
psxkey04.exe
psxtmmutexattr01.exe
psxtmthread05.exe
sp18.exe
sp21.exe
sp22.exe
sp43.exe
sp51.exe
sp60.exe
spfifo04.exe
spintrcritical12.exe
spintrcritical13.exe
spintrcritical16.exe
spqreslib.exe
ts-userext.exe
Average test time: 0:00:02.271431
Testing time : 0:25:33.216318
More information about the build
mailing list