Build Linux: FAILED 6/rtems-microblaze on x86_64-linux-gnu (microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1)
sebastian.huber at embedded-brains.de
sebastian.huber at embedded-brains.de
Thu Sep 5 03:55:12 UTC 2024
RTEMS Source Builder - Set Builder, 6 (745ff5f98c8e)
warning: exe: absolute exe found in path: (__chown) /usr/sbin/chown
Host: Linux-5.14.21-150500.55.68-default-x86_64-with-glibc2.3.4
Linux lupus 5.14.21-150500.55.68-default #1 SMP PREEMPT_DYNAMIC Wed Jun 5
21:39:05 UTC 2024 (40e256a) x86_64 x86_64
Build Time: 0:02:44.409531
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Build FAILED: microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
checking for pod2html... yes
pod2html
checking for stdint types... checking for an ANSI C-conforming const... no
checking for KERN_PROC... yes
yes
stdint.h (shortcircuit)
checking sys/mman.h usability... yes
make use of stdint.h in include/isl/stdint.h (assuming C99 compatible system)
checking which gmp to use... system
checking gmp.h usability... checking for __fsetlocking... yes
yes
checking whether asprintf is declared... no
checking for KERN_PROG_ARGS... checking for calloc... checking for getpagesize... yes
checking sys/mman.h presence... yes
checking gmp.h presence... yes
yes
yes
checking for sys/mman.h... yes
checking for mmap... no
checking for clock_gettime... checking for iconv... yes
checking for gmp.h... yes
checking for main in -lgmp... checking whether basename is declared... config.status: creating Makefile
yes
yes
checking for gettimeofday... config.status: creating mkheaders.almost
checking for clock... yes
checking whether read-only mmap of a plain file works... yes
checking whether mmap from /dev/zero works... yes
checking for MAP_ANON(YMOUS)... yes
yes
config.status: creating config.h
checking whether -pthread is supported... checking whether errno is declared... yes
yes
checking for iconv declaration... yes
checking whether -gdwarf-5 is supported... yes
checking whether mmap with MAP_ANON(YMOUS) works... yes
checking whether to enable maintainer-specific portions of Makefiles... no
yes
yes
checking for index... checking for ffs... no
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for nl_langinfo and CODESET... checking whether getopt is declared... configure: updating cache ./config.cache
configure: creating ./config.status
yes
checking for compress in -lz... checking whether mp_get_memory_functions is declared... yes
yes
yes
checking for insque... checking whether vasprintf is declared... yes
checking for LC_MESSAGES... checking for getcwd... yes
yes
checking whether --compress-debug-sections is supported... checking whether ffs is declared... yes
yes
yes
checking for bison... bison
checking version of bison... checking whether clearerr_unlocked is declared... yes
yes
checking for memchr... 3.0.4, ok
checking whether NLS is requested... no
checking whether to use NLS... no
checking for aclocal... aclocal
checking for autoconf... autoconf
checking for autoheader... autoheader
checking bison 3 or later... yes
checking for objcopy... objcopy
checking for readelf... readelf
checking whether objcopy supports debuglink... 3.0.4, bison3
checking whether __builtin_ffs is declared... checking for getpagesize... yes
checking for dsymutil... dsymutil
checking for nm... nm
checking for xz... xz
checking for comm... comm
checking for lzma_auto_decoder in -llzma... yes
configure: updating cache ./config.cache
configure: creating ./config.status
checking whether feof_unlocked is declared... yes
yes
yes
checking whether _BitScanForward is declared... checking for memcmp... yes
checking whether tests can run... checking for gettimeofday... config.status: creating Makefile
no
yes
config.status: creating mkheaders.almost
checking whether strcasecmp is declared... checking whether ferror_unlocked is declared... yes
config.status: creating config.h
yes
yes
yes
checking for memcpy... checking for index... yes
checking whether strncasecmp is declared... checking whether fflush_unlocked is declared... configure: updating cache ./config.cache
yes
checking that generated files are newer than configure... done
configure: creating ./config.status
checking whether _stricmp is declared... yes
yes
yes
checking whether fgetc_unlocked is declared... checking for insque... checking for memmem... no
checking whether _strnicmp is declared... config.status: creating Makefile
yes
yes
config.status: creating config.intl
checking whether fgets_unlocked is declared... no
yes
checking for memmove... checking whether snprintf is declared... checking for memchr... config.status: creating config.h
config.status: executing default-1 commands
yes
yes
checking whether fileno_unlocked is declared... checking whether _snprintf is declared... yes
yes
checking for mempcpy... checking for memcmp... yes
no
checking which clang to use... no
checking for C compiler vendor... (cached) gnu
checking our pkgconfig libname... checking whether fprintf_unlocked is declared... isl
checking our pkgconfig version... 0.24
checking our pkgconfig_libdir... ${libdir}/pkgconfig
expanded our pkgconfig_libdir... /opt/rtems/6/lib/pkgconfig
checking our pkgconfig_libfile... isl.pc
checking our package / suffix... isl /
checking our pkgconfig description... isl Library
checking our pkgconfig requires...
checking our pkgconfig ext libs... -lisl -lgmp
checking our pkgconfig cppflags...
checking our pkgconfig ldflags...
noninstalled pkgconfig -L /home/EB/sebastian_h/src/rtems-source-builder/rtems/build/microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1/build/isl/.libs
yes
noninstalled pkgconfig -I /home/EB/sebastian_h/src/rtems-source-builder/rtems/build/microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1/build/isl/../../gnu-mirror-gcc-87a5641/isl/include
no
yes
checking for memset... checking whether fputc_unlocked is declared... checking for memcpy... configure: updating cache ./config.cache
yes
checking that generated files are newer than configure... done
configure: creating ./config.status
yes
checking whether fputs_unlocked is declared... checking for mkstemps... yes
checking for memmem... yes
checking whether fread_unlocked is declared... yes
checking for putenv... yes
yes
checking for memmove... checking whether fwrite_unlocked is declared... yes
checking for random... yes
checking whether getchar_unlocked is declared... yes
checking for mempcpy... yes
yes
checking whether getc_unlocked is declared... checking for rename... yes
checking for memset... yes
yes
checking whether putchar_unlocked is declared... checking for rindex... yes
yes
checking whether putc_unlocked is declared... checking for mkstemps... yes
checking for setenv... yes
checking for working alloca.h... yes
checking for putenv... yes
checking for snprintf... yes
checking for alloca... yes
checking for random... yes
checking for ANSI C header files... (cached) yes
checking for nl_langinfo and CODESET... yes
checking for sigsetmask... yes
yes
checking whether NLS is requested... no
checking for uchar... checking for rename... yes
checking for stpcpy...
checking size of ino_t... yes
checking for rindex... yes
checking for stpncpy... 8
checking size of dev_t... config.status: creating Makefile
yes
config.status: creating backtrace-supported.h
checking for setenv... yes
checking for strcasecmp... config.status: creating install-debuginfo-for-buildid.sh
8
checking for ld used by GCC... config.status: creating config.h
yes
/usr/lib64/gcc/x86_64-suse-linux/7/../../../../x86_64-suse-linux/bin/ld
checking if the linker (/usr/lib64/gcc/x86_64-suse-linux/7/../../../../x86_64-suse-linux/bin/ld) is GNU ld... checking for snprintf... config.status: executing libtool commands
yes
checking for shared library run path origin... yes
checking for strchr... config.status: executing gstdint.h commands
done
yes
checking for iconv... (cached) no
checking for CET support... config.status: executing default commands
checking for sigsetmask... yes
checking for strdup... no
yes
checking for stpcpy... configure: updating cache ./config.cache
yes
configure: creating ./config.status
checking for strncasecmp... yes
checking for stpncpy... yes
checking for strndup... yes
checking for strcasecmp... yes
checking for strnlen... config.status: creating Makefile
config.status: creating config.h
yes
config.status: executing depdir commands
checking for strchr... yes
mkdir -p -- .deps
checking for strrchr... yes
checking for strdup... yes
checking for strstr... yes
yes
checking for strncasecmp... checking for strtod... yes
yes
checking for strtol... checking for strndup... yes
config.status: creating isl_srcdir.c
checking for strtoul... yes
checking for strnlen... config.status: creating Makefile
config.status: creating doc/Makefile
yes
checking for strtoll... yes
checking for strrchr... config.status: creating bound_test.sh
config.status: creating codegen_test.sh
yes
checking for strtoull... config.status: creating pip_test.sh
yes
checking for strstr... config.status: creating flow_test.sh
yes
checking for strverscmp... config.status: creating schedule_test.sh
yes
config.status: creating isl_config.h
checking for strtod... config.status: executing depfiles commands
yes
checking for tmpnam... yes
checking for strtol... yes
checking for vasprintf... yes
checking for strtoul... yes
checking for vfprintf... yes
checking for strtoll... yes
checking for vprintf... yes
checking for strtoull... yes
checking for vsnprintf... yes
checking for strverscmp... yes
checking for vsprintf... yes
checking for tmpnam... yes
checking for waitpid... yes
checking for vasprintf... yes
checking for setproctitle... yes
checking for vfprintf... no
checking whether alloca needs Cray hooks... no
checking stack direction for C alloca... yes
checking for vprintf... config.status: executing libtool commands
-1
checking for vfork.h... config.status: executing include/isl/stdint.h commands
config.status: creating include/isl/stdint.h : _ISL_INCLUDE_ISL_STDINT_H
config.status: executing isl.pc commands
config.status: creating isl.pc.in
config.status: creating isl.pc
no
checking for fork... config.status: creating isl-uninstalled.pc
yes
config.status: creating isl-uninstalled.sh
checking for vsnprintf... yes
checking for vfork... yes
checking for vsprintf... yes
checking for working fork... yes
checking for waitpid... yes
checking for working vfork... (cached) yes
checking for _doprnt... yes
checking for setproctitle... no
checking for sys_errlist... no
checking whether alloca needs Cray hooks... yes
checking for sys_nerr... no
checking stack direction for C alloca... yes
checking for sys_siglist... -1
checking for vfork.h... no
checking for fork... yes
checking for external symbol _system_configuration... no
yes
checking for __fsetlocking... checking for vfork... yes
checking for canonicalize_file_name... yes
checking for working fork... yes
checking for dup3... yes
checking for working vfork... (cached) yes
checking for _doprnt... yes
checking for getrlimit... no
checking for sys_errlist... yes
checking for getrusage... yes
checking for sys_nerr... yes
checking for getsysinfo... yes
checking for sys_siglist... no
checking for gettimeofday... (cached) yes
yes
checking for external symbol _system_configuration... checking for on_exit... no
checking for __fsetlocking... yes
checking for pipe2... yes
checking for canonicalize_file_name... yes
checking for psignal... yes
checking for dup3... yes
checking for pstat_getdynamic... yes
no
checking for getrlimit... checking for pstat_getstatic... yes
no
checking for getrusage... checking for realpath... yes
yes
checking for setrlimit... checking for getsysinfo... yes
checking for spawnve... no
checking for gettimeofday... (cached) yes
checking for on_exit... no
checking for spawnvpe... yes
checking for pipe2... no
checking for strerror... yes
checking for psignal... yes
checking for strsignal... yes
checking for pstat_getdynamic... yes
checking for sysconf... no
checking for pstat_getstatic... yes
checking for sysctl... no
checking for realpath... yes
checking for sysmp... yes
checking for setrlimit... no
checking for table... yes
checking for spawnve... no
checking for times... no
checking for spawnvpe... yes
checking for wait3... no
checking for strerror... yes
checking for wait4... yes
checking for strsignal... yes
checking for sbrk... yes
yes
checking for sysconf... checking whether basename is declared... yes
yes
checking for sysctl... checking whether ffs is declared... yes
checking whether asprintf is declared... yes
checking for sysmp... yes
checking whether vasprintf is declared... no
checking for table... yes
checking whether snprintf is declared... yes
no
checking whether vsnprintf is declared... checking for times... yes
checking whether calloc is declared... yes
checking for wait3... yes
checking whether getenv is declared... yes
checking for wait4... yes
checking whether getopt is declared... yes
yes
checking for sbrk... checking whether malloc is declared... yes
yes
checking whether realloc is declared... checking whether basename is declared... yes
checking whether sbrk is declared... yes
checking whether ffs is declared... yes
checking whether strtol is declared... yes
checking whether asprintf is declared... yes
checking whether strtoul is declared... yes
checking whether vasprintf is declared... yes
checking whether strtoll is declared... yes
checking whether snprintf is declared... yes
checking whether strtoull is declared... yes
checking whether vsnprintf is declared... yes
checking whether strverscmp is declared... yes
checking whether calloc is declared... yes
checking whether strnlen is declared... yes
yes
checking whether getenv is declared... checking whether canonicalize_file_name must be declared... no
yes
checking for stdlib.h... (cached) yes
checking whether getopt is declared... checking for unistd.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... yes
checking whether malloc is declared... yes
checking whether realloc is declared... yes
checking for working strncmp... yes
checking whether sbrk is declared... yes
yes
checking whether strtol is declared... configure: updating cache ./config.cache
configure: creating ./config.status
yes
checking whether strtoul is declared... yes
checking whether strtoll is declared... yes
checking whether strtoull is declared... config.status: creating Makefile
config.status: creating testsuite/Makefile
yes
checking whether strverscmp is declared... config.status: creating config.h
config.status: executing default commands
yes
checking whether strnlen is declared... yes
checking whether canonicalize_file_name must be declared... no
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... yes
checking for working strncmp... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating testsuite/Makefile
config.status: creating config.h
config.status: executing default commands
make[1]: Leaving directory '/tmp/sh/b-rsb/microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1/build'
make: *** [Makefile:1033: all] Error 2
make: Leaving directory '/tmp/sh/b-rsb/microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1/build'
shell cmd failed: /bin/sh -ex /home/EB/sebastian_h/src/rtems-source-builder/rtems/build/microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1/do-build
error: building microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1
See error report: rsb-report-microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1.txt
Note: In some cases the error appears only in
the complete build log (see --log option)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Output
======
Build Set: 6/rtems-microblaze
config: devel/expat-2.5.0-1.cfg
package: expat-2.5.0-x86_64-linux-gnu-1
building: expat-2.5.0-x86_64-linux-gnu-1
sizes: expat-2.5.0-x86_64-linux-gnu-1: 9.972MB (installed: 1.425MB)
cleaning: expat-2.5.0-x86_64-linux-gnu-1
reporting: devel/expat-2.5.0-1.cfg -> expat-2.5.0-x86_64-linux-gnu-1.txt
reporting: devel/expat-2.5.0-1.cfg -> expat-2.5.0-x86_64-linux-gnu-1.xml
config: devel/gmp-6.2.1.cfg
package: gmp-6.2.1-x86_64-linux-gnu-1
building: gmp-6.2.1-x86_64-linux-gnu-1
sizes: gmp-6.2.1-x86_64-linux-gnu-1: 36.648MB (installed: 4.976MB)
cleaning: gmp-6.2.1-x86_64-linux-gnu-1
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-linux-gnu-1.txt
reporting: devel/gmp-6.2.1.cfg -> gmp-6.2.1-x86_64-linux-gnu-1.xml
config: tools/rtems-gdb-13.2.cfg
package: microblaze-rtems6-gdb-13.2-x86_64-linux-gnu-1
building: microblaze-rtems6-gdb-13.2-x86_64-linux-gnu-1
sizes: microblaze-rtems6-gdb-13.2-x86_64-linux-gnu-1: 889.620MB (installed: 171.069MB)
cleaning: microblaze-rtems6-gdb-13.2-x86_64-linux-gnu-1
reporting: tools/rtems-gdb-13.2.cfg -> microblaze-rtems6-gdb-13.2-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gdb-13.2.cfg -> microblaze-rtems6-gdb-13.2-x86_64-linux-gnu-1.xml
config: tools/rtems-xilinx-binutils-2.36.cfg
package: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
building: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
sizes: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1: 621.380MB (installed: 132.110MB)
cleaning: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
reporting: tools/rtems-xilinx-binutils-2.36.cfg -> microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1.txt
reporting: tools/rtems-xilinx-binutils-2.36.cfg -> microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1.xml
config: tools/rtems-xilinx-gcc-12-newlib-head.cfg
package: microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1
building: microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1
error: building microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1
Build FAILED
See error report: rsb-report-microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1.txt
Note: In some cases the error appears only in
the complete build log (see --log option)
error: building microblaze-rtems6-gcc-87a5641-newlib-1b3dcfd-x86_64-linux-gnu-1
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 5 05:52:36 2024
==============================================================================
Report: devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 745ff5f98c8e208e0056331188005debccaf9db6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.5.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.5.0-x86_64-linux-gnu-1
Config: devel/expat-2.5.0-1.cfg
Summary:
Expat XML Parser v2.5.0 for target microblaze-rtems6 on host x86_64-linux-gnu
URL:
http://expat.sourceforge.net/
Version:
2.5.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_5_0/expat-2.5.0.tar.gz
sha512: 8f99pfr7R9zW4PDYkoJqum3nZQnISXvAA4LxEJq44qk9OWlD27UiFkVwRJk6Odc3KASK32UNjoPigYntx7eEAg==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.5.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.5.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --verbose --prefix=/opt/rtems/6 --bindir=/opt/rtems/6/bin --exec-prefix=/opt/rtems/6 --includedir=/opt/rtems/6/include --libdir=/opt/rtems/6/lib --mandir=/opt/rtems/6/share/man --infodir=/opt/rtems/6/share/info --disable-shared
make -j 48 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.5.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 5 05:52:36 2024
==============================================================================
Report: devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 745ff5f98c8e208e0056331188005debccaf9db6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/expat-2.5.0-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/expat-2.5.0-1.cfg
------------------------------------------------------------------------------
Package: expat-2.5.0-x86_64-linux-gnu-1
Config: devel/expat-2.5.0-1.cfg
Summary:
Expat XML Parser v2.5.0 for target microblaze-rtems6 on host x86_64-linux-gnu
URL:
http://expat.sourceforge.net/
Version:
2.5.0
Release:
1
Sources: 1
1: https://github.com/libexpat/libexpat/releases/download/R_2_5_0/expat-2.5.0.tar.gz
sha512: 8f99pfr7R9zW4PDYkoJqum3nZQnISXvAA4LxEJq44qk9OWlD27UiFkVwRJk6Odc3KASK32UNjoPigYntx7eEAg==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source expat -q -n expat-2.5.0
%setup patch expat -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd expat-2.5.0
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --verbose --prefix=/opt/rtems/6 --bindir=/opt/rtems/6/bin --exec-prefix=/opt/rtems/6 --includedir=/opt/rtems/6/include --libdir=/opt/rtems/6/lib --mandir=/opt/rtems/6/share/man --infodir=/opt/rtems/6/share/info --disable-shared
make -j 48 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd expat-2.5.0
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 5 05:53:01 2024
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 745ff5f98c8e208e0056331188005debccaf9db6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-linux-gnu-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target microblaze-rtems6 on host x86_64-linux-gnu
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: iQQzSjvMXIluzsq8dc2p3sZC5AH7U5fEmSxPq+peliyc6L1E6OQjPDTlXIAQzCjbBUX191DL27XwCvU43HY76Q==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --verbose --prefix=/opt/rtems/6 --bindir=/opt/rtems/6/bin --exec-prefix=/opt/rtems/6 --includedir=/opt/rtems/6/include --libdir=/opt/rtems/6/lib --mandir=/opt/rtems/6/share/man --infodir=/opt/rtems/6/share/info --disable-shared
make -j 48 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 5 05:53:01 2024
==============================================================================
Report: devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 745ff5f98c8e208e0056331188005debccaf9db6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gmp-6.2.1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gmp-6.2.1.cfg
------------------------------------------------------------------------------
Package: gmp-6.2.1-x86_64-linux-gnu-1
Config: devel/gmp-6.2.1.cfg
Summary:
The GNU Multiple Precision Arithmetic Library (GMP) v6.2.1 for target microblaze-rtems6 on host x86_64-linux-gnu
URL:
https://gmplib.org/
Version:
6.2.1
Release:
1
Sources: 1
1: https://gcc.gnu.org/pub/gcc/infrastructure/gmp-6.2.1.tar.bz2
sha512: iQQzSjvMXIluzsq8dc2p3sZC5AH7U5fEmSxPq+peliyc6L1E6OQjPDTlXIAQzCjbBUX191DL27XwCvU43HY76Q==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source gmp -q -n gmp-6.2.1
%setup patch gmp -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd gmp-6.2.1
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
./configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --verbose --prefix=/opt/rtems/6 --bindir=/opt/rtems/6/bin --exec-prefix=/opt/rtems/6 --includedir=/opt/rtems/6/include --libdir=/opt/rtems/6/lib --mandir=/opt/rtems/6/share/man --infodir=/opt/rtems/6/share/info --disable-shared
make -j 48 all
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd gmp-6.2.1
make DESTDIR=$SB_BUILD_ROOT install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 5 05:54:16 2024
==============================================================================
Report: tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 745ff5f98c8e208e0056331188005debccaf9db6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-13.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-gdb-13.2-x86_64-linux-gnu-1
Config: tools/rtems-gdb-13.2.cfg
Summary:
GDB v13.2 for target microblaze-rtems6 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
13.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-13.2.tar.xz
sha512: gYXT4Rq2Da//WGClAWV3v+fddUfvAevIZ7wkdgPYK3T/dMTylJLH0q7lcHb1K+M+KJ9Ma0FKS4cNSzAEkJ9MNA==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-13.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=microblaze-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/opt/rtems/6 --bindir=/opt/rtems/6/bin --exec-prefix=/opt/rtems/6 --includedir=/opt/rtems/6/include --libdir=/opt/rtems/6/lib --mandir=/opt/rtems/6/share/man --infodir=/opt/rtems/6/share/info
make -j 48 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/rtems/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/rtems/6/share/info/dir
touch $SB_BUILD_ROOT/opt/rtems/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 5 05:54:17 2024
==============================================================================
Report: tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 745ff5f98c8e208e0056331188005debccaf9db6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-13.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-13.2.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-gdb-13.2-x86_64-linux-gnu-1
Config: tools/rtems-gdb-13.2.cfg
Summary:
GDB v13.2 for target microblaze-rtems6 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
13.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-13.2.tar.xz
sha512: gYXT4Rq2Da//WGClAWV3v+fddUfvAevIZ7wkdgPYK3T/dMTylJLH0q7lcHb1K+M+KJ9Ma0FKS4cNSzAEkJ9MNA==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-13.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=microblaze-rtems6 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/opt/rtems/6 --bindir=/opt/rtems/6/bin --exec-prefix=/opt/rtems/6 --includedir=/opt/rtems/6/include --libdir=/opt/rtems/6/lib --mandir=/opt/rtems/6/share/man --infodir=/opt/rtems/6/share/info
make -j 48 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/rtems/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/rtems/6/share/info/dir
touch $SB_BUILD_ROOT/opt/rtems/6/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 5 05:54:56 2024
==============================================================================
Report: tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 745ff5f98c8e208e0056331188005debccaf9db6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-xilinx-binutils-2.36.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
Config: tools/rtems-xilinx-binutils-2.36.cfg
Summary:
Binutils v7af075d for target microblaze-rtems6 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
7af075d
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-7af075d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7af075d
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-7af075d
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=microblaze-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/opt/rtems/6 --bindir=/opt/rtems/6/bin --exec-prefix=/opt/rtems/6 --includedir=/opt/rtems/6/include --libdir=/opt/rtems/6/lib --mandir=/opt/rtems/6/share/man --infodir=/opt/rtems/6/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 48 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/rtems/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/rtems/6/share/info/dir
touch $SB_BUILD_ROOT/opt/rtems/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/opt/rtems/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/opt/rtems/6/bin/microblaze-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/share/man/man1/microblaze-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/rtems/6/bin/microblaze-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/share/man/man1/microblaze-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/rtems/6/bin/microblaze-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/share/man/man1/microblaze-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/rtems/6/bin/microblaze-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/share/man/man1/microblaze-rtems6-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Sep 5 05:54:56 2024
==============================================================================
Report: tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 745ff5f98c8e208e0056331188005debccaf9db6
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-xilinx-binutils-2.36.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-xilinx-binutils-2.36.cfg
------------------------------------------------------------------------------
Package: microblaze-rtems6-binutils-7af075d-x86_64-linux-gnu-1
Config: tools/rtems-xilinx-binutils-2.36.cfg
Summary:
Binutils v7af075d for target microblaze-rtems6 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
7af075d
Release:
1
Sources: 1
1: --rsb-file=sourceware-mirror-binutils-gdb-7af075d.tar.gz https://codeload.github.com/RTEMS/sourceware-mirror-binutils-gdb/tar.gz/7af075d
No checksum
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source=sourceware-mirror-binutils-gdb-7af075d
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "microblaze-rtems6" -o "x86_64-linux-gnu" == "microblaze-rtems6" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=microblaze-rtems6 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/opt/rtems/6 --bindir=/opt/rtems/6/bin --exec-prefix=/opt/rtems/6 --includedir=/opt/rtems/6/include --libdir=/opt/rtems/6/lib --mandir=/opt/rtems/6/share/man --infodir=/opt/rtems/6/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 48 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/opt/rtems/6/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/opt/rtems/6/share/info/dir
touch $SB_BUILD_ROOT/opt/rtems/6/share/info/dir
mkdir -p $SB_BUILD_ROOT/opt/rtems/6/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/opt/rtems/6/bin/microblaze-rtems6-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/share/man/man1/microblaze-rtems6-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/rtems/6/bin/microblaze-rtems6-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/share/man/man1/microblaze-rtems6-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/rtems/6/bin/microblaze-rtems6-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/share/man/man1/microblaze-rtems6-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/opt/rtems/6/bin/microblaze-rtems6-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/opt/rtems/6/share/man/man1/microblaze-rtems6-windmc*
fi
cd ${build_top}
More information about the build
mailing list