[rtems-test] powerpc/psim: RTEMS_POSIX_API: Passed:610 Failed:16 Timeout:16 Test-Too-long:2 Invalid:0 Wrong:0
OAR Tester for CentOS 7
rtems-tester at oarcorp.com
Mon Sep 9 17:30:26 UTC 2024
Testing time : 0:24:25.723012
Average test time: 0:00:02.168229
Host
====
Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
Configuration
=============
Version: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
Build : RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
Summary
=======
Passed: 610
Failed: 16
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 16
Test too long: 2
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 676
Failures:
block10.exe
dl06.exe
fsimfsgeneric01.exe
imfs_fspatheval.exe
psx12.exe
psxenosys.exe
psxkey08.exe
sp02.exe
sp71.exe
spsimplesched01.exe
termios05.exe
ticker.exe
tm20.exe
minimum.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
devfs04.exe
math.exe
mdosfs_fsscandir01.exe
mrfs_fstime.exe
sp25.exe
spchain.exe
spcpucounter01.exe
spinternalerror02.exe
spintrcritical08.exe
sppps01.exe
spsem_err01.exe
spwatchdog.exe
tftpfs.exe
tmck.exe
tmonetoone.exe
ts-userext.exe
Test too long:
crypt01.exe
unlimited.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64
Python: 2.7.5 (default, Nov 14 2023, 16:14:06) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]
Host: Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
[ 1/676] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/676] p:5 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:06.089490 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
=> test end: FSIMFSGENERIC 1
] [ RTEMS shutdown ]
[ 16/676] p:5 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[ 23/676] p:11 f:1 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: imfs_fspatheval.exe
Result: failed
Time: 0:00:03.497545 imfs_fspatheval.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/imfs_fspatheval.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/imfs_fspatheval.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fspatheval.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fspatheval.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/imfs_fspatheval.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSPATHEVAL ROOT IMFS
] *** BEGIN OF TEST FSPATHEVAL ROOT IMFS ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] Initializing filesystem ROOT IMFS
] Making directory /test1/
] Making directory tets2
] Making directory ///test3
] Making directory test4////
] Making directory ../../test5
] Making directory /test1/../test6
] Making directory ./test7/
] Making directory .././test8
] Making directory test8/./../test9
] Making directory ///test9/../test10
] Making directory !#$%&()-@^_`{}~'
] Making directory 0_1_A
] Making directory aaa bbb
] Making directory ccc....ddd
] Making directory fff
] Removing directory test10
] Removing directory test9
] Removing directory test8
] Removing directory test7
] Removing directory test6
] Removing directory test5
] Removing directory test4
] Removing directory test3
] Removing directory tets2
] Removing directory test1
] Removing directory fff
] Removing directory ccc....ddd
] Removing directory aaa bbb
] Removing directory 0_1_A
] Removing directory !#$%&()-@^_`{}~'
] Create file /test1
] Create file tets2
] Create file ///test3
] Create file test4
] Create file ../../test5
] Create file /../test6
] Create file ./test7
] Create file .././test8
] xecuting thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[ 24/676] p:13 f:1 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: imfs_fspermission.exe
<<skipping passes>>
[ 68/676] p:44 f:2 u:0 e:11 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mdosfs_fsscandir01.exe
Result: timeout
Time: 0:03:06.040102 mdosfs_fsscandir01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsscandir01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/mdosfs_fsscandir01.exe...
=> test end: None
] *** TIMEOUT TIMEOUT
[ 69/676] p:45 f:2 u:0 e:11 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mdosfs_fsstatvfs.exe
<<skipping passes>>
[ 99/676] p:68 f:2 u:0 e:18 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mrfs_fstime.exe
Result: timeout
Time: 0:03:09.213624 mrfs_fstime.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mrfs_fstime.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSTIME RFS
] *** BEGIN OF TEST FSTIME RFS ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] Initializing filesystem RFS
] Sleep a few seconds
=> test end: FSTIME RFS
] *** TIMEOUT TIMEOUT
[100/676] p:68 f:2 u:0 e:19 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: tftpfs.exe
Result: timeout
Time: 0:03:37.374756 tftpfs.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/tftpfs.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/tftpfs.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/tftpfs.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/tftpfs.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/tftpfs.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TFTPFS
] *** BEGIN OF TEST TFTPFS ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] A:TFTPFS
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] S:Version:6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] S:BSP:psim
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:FxbUPMFAfdnPCU2b0Y4l-hl4WMdj1U-2DWddZSVVsUA=
] S:RTEMS_DEBUG:0
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:write_tiny_file_packet_losts
] TFTPFS: /server.tftp:file.txt
] E:write_tiny_file_packet_losts:N:144:F:0:D:0.139872
] B:write_tiny_file_OACK_no_options
] TFTPFS: /127.0.0.1:file.txt
] E:write_tiny_file_OACK_no_options:N:57:F:0:D:0.024029
] B:write_simple_file_large_blocks
] TFTPFS: /127.0.0.1:file.txt
] E:write_simple_file_large_blocks:N:101:F:0:D:0.038547
] B:write_simple_file_disk_full
] TFTPFS: /127.0.0.1:file.txt
] E:write_simple_file_disk_full:N:58:F:0:D:0.052305
] B:write_simple_file_default_options
] E:write_simple_file_default_options:N:416:F:0:D:2.423546
] B:write_simple_file
] TFTPFS: /127.0.0.1:file.txt
] E:write_simple_file:N:100:F:0:D:0.079929
] B:write_short_file_malformed_opcode
] TFTPFS: /127.0.0.1:file.txt
] E:write_short_file_malformed_opcode:N:67:F:0:D:0.043547
] B:write_short_file_malformed_ACK_2
] TFTPFS: /127.0.0.1:file.txt
] E:write_short_file_malformed_ACK_2:N:89:F:0:D:0.053066
] B:write_short_file_malformed_ACK_1
] TFTPFS: /127.0.0.1:file.txt
] E:write_short_file_malformed_ACK_1:N:67:F:0:D:0.043488
] B:write_short_file_bad_block_numbers
] TFTPFS: /127.0.0.1:file.txt
] E:write_short_file_bad_block_numbers:N:160:F:0:D:0.091040
] B:write_one_block_file_stray_packets
] TFTPFS: /127.0.0.1:file.txt
] E:write_one_block_file_stray_packets:N:116:F:0:D:0.089032
] B:write_file_windowsize_trouble
] E:write_file_windowsize_trouble:N:687:F:0:D:0.069466
] B:write_file_rfc7440_scenario
] E:write_file_rfc7440_scenario:N:370:F:0:D:0.038438
] B:write_file_malformed_ack_3
] TFTPFS: /127.0.0.1:file.txt
] E:write_file_malformed_ack_3:N:45:F:0:D:0.004935
] B:write_file_malformed_ack_2
] TFTPFS: /127.0.0.1:file.txt
] E:write_file_malformed_ack_2:N:45:F:0:D:0.005213
] B:write_file_malformed_ack_1
] TFTPFS: /127.0.0.1:file.txt
] E:write_file_malformed_ack_1:N:45:F:0:D:0.004860
] B:write_file_illegal_opcode_1
] TFTPFS: /127.0.0.1:file.txt
] E:write_file_illegal_opcode_1:N:45:F:0:D:0.004988
] B:write_file_fallback_to_no_options
] E:write_file_fallback_to_no_options:N:79:F:0:D:0.024950
] B:write_file_ACK_instead_of_OACK
] E:write_file_ACK_instead_of_OACK:N:56:F:0:D:0.023599
] B:write_empty_file_packet_losts
] TFTPFS: /server.tftp:file.txt
] E:write_empty_file_packet_losts:N:144:F:0:D:0.009983
] B:tftp_write_null_tftp_handle
] E:tftp_write_null_tftp_handle:N:1:F:0:D:0.000416
] B:tftp_write_null_buffer
] E:tftp_write_null_buffer:N:1:F:0:D:0.000416
] B:tftp_read_null_tftp_handle
] E:tftp_read_null_tftp_handle:N:1:F:0:D:0.000415
] B:tftp_read_null_buffer
] E:tftp_read_null_buffer:N:1:F:0:D:0.000416
] B:tftp_open_null_tftp_handle
] E:tftp_open_null_tftp_handle:N:1:F:0:D:0.000416
] B:tftp_open_null_hostname
] E:tftp_open_null_hostname:N:6:F:0:D:0.001579
] B:tftp_open_null_filename
] E:tftp_open_null_filename:N:6:F:0:D:0.001579
] B:tftp_open_illegal_window_size
] E:tftp_open_illegal_window_size:N:7:F:0:D:0.001761
] B:tftp_open_block_size_too_small
] E:tftp_open_block_size_too_small:N:7:F:0:D:0.001806
] B:tftp_open_block_size_too_large
] E:tftp_open_block_size_too_large:N:7:F:0:D:0.001762
] B:tftp_initialize_net_config_null
] E:tftp_initialize_net_config_null:N:0:F:0:D:0.000407
] B:tftp_initialize_net_config
] _"
] E:tftp_initialize_net_config:N:6:F:small_file_lost_packets:N:111:F:0:D:0.062574
] B:read_simple_file
] TFTPFS: /127.0.0.1:file.txt
] E:read_simple_file:N:89:F:0:D:0.096807
] B:read_one_block_file_server_error
] TFTPFS: /127.0.0.1:file.txt
] E:read_one_block_file_server_error:N:59:F:0:D:0.040362
] B:read_one_block_file_malformed_server_error
] TFTPFS: /127.0.0.1:file.txt
] E:read_one_block_file_malformed_server_error:N:58:F:0:D:0.040950
] B:read_one_block_file
] TFTPFS: /127.0.0.1:file.txt
] E:read_one_block_file:N:67:F:0:D:0.042524
] B:read_one_block_close_file
] TFTPFS: /127.0.0.1:file.txt
] E:read_one_block_close_file:N:45:F:0:D:0.141596
] B:read_not_existing_file
] TFTPFS: /server.tftp:file.txt
] E:read_not_existing_file:N:36:F:0:D:0.004362
] B:read_malformed_filename
] TFTPFS: /server.tftp
] E:read_malformed_filename:N:6:F:0:D:0.002659
] B:read_from_unknown_ip_address
] TFTPFS: /not-existing-server-address:file.txt
] L:gethostbyname(not-existing-server-address) = 0
] E:read_from_unknown_ip_address:N:6:F:0:D:0.003499
] B:read_file_with_default_options
] E:read_file_with_default_options:N:304:F:0:D:1.938569
] B:read_file_windowsize_trouble
] E:read_file_windowsize_trouble:N:1124:F:0:D:0.108915
] B:read_file_useless_fallback_to_no_options
] E:read_file_useless_fallback_to_no_options:N:59:F:0:D:0.005709
] B:read_file_stray_packets
] TFTPFS: /127.0.0.1:file.txt
] E:read_file_stray_packets:N:84:F:0:D:0.072017
] B:read_file_rfc7440_scenario
] E:read_file_rfc7440_scenario:N:322:F:0:D:0.031651
] B:read_file_one_large_block
] TFTPFS: /127.0.0.1:file.txt
] E:read_file_one_large_block:N:90:F:0:D:4.691349
] B:read_file_malformed_ack_3
] TFTPFS: /127.0.0.1:file.txt
] E:read_file_malformed_ack_3:N:45:F:0:D:0.005217
] B:read_file_malformed_ack_2
] TFTPFS: /127.0.0.1:file.txt
] E:read_file_malformed_ack_2:N:45:F:0:D:0.004870
] B:read_file_malformed_ack_1
] TFTPFS: /127.0.0.1:file.txt
] E:read_file_malformed_ack_1:N:45:F:0:D:0.005141
] B:read_file_illegal_opcode_1
] TFTPFS: /127.0.0.1:file.txt
] E:read_file_illegal_opcode_1:N:45:F:0:D:0.005269
] B:read_file_fallback_to_no_options
] E:read_file_fallback_to_no_options:N:68:F:0:D:0.006426
] B:read_file_block_number_0
] TFTPFS: /127.0.0.1:file.txt
] E:read_file_block_number_0:N:45:F:0:D:0.035900
] B:read_file_DATA_instead_of_OACK
] E:read_file_DATA_instead_of_OACK:N:45:F:0:D:0.005155
] B:read_empty_file_looing_rrq
] TFTPFS: /server.tftp:file.txt
] E:read_empty_file_looing_rrq:N:89:F:0:D:0.007511
] B:read_empty_file
] TFTPFS: /server.tftp:file.txt
] E:read_empty_file:N:45:F:0:D:0.004975
] B:read_close_file_immediately
] TFTPFS: /127.0.0.1:file.txt
] E:read_close_file_immediately:N:45:F:0:D:0.144565
] B:mount_with_bad_options
] TFTP FS: ERROR in mount options 'windowsize=4567,blocksize=123bad'.
] TFTP FS: Cannot parse from this point: 'bad'
] E:mount_with_bad_options:N:4:F:0:D:0.002669
] B:client_write_to_file_opened_for_reading
] E:client_write_to_file_opened_for_reading:N:48:F:0:D:0.114054
] B:client_write_simple_file
] E:client_write_simple_file:N:90:F:0:D:0.263498
] B:client_read_to_file_opened_for_writing
] E:client_read_to_file_opened_for_writing:N:60:F:0:D:0.005103
] B:client_open_with_none_default_config
] E:client_open_with_none_default_config:N:126:F:0:D:0.116768
] B:client_open_with_NULL_config
] E:client_open_with_NULL_config:N:47:F:0:D:0.004524
] B:_Tftpfs_Parse_options_windowsize
] E:_Tftpfs_Parse_options_windowsize:N:4:F:0:D:0.000592
] B:_Tftpfs_Parse_options_verbose
] E:_Tftpfs_Parse_options_verbose:N:4:F:0:D:0.000448
] B:_Tftpfs_Parse_options_truncated_option
] E:_Tftpfs_Parse_options_truncated_option:N:1:F:0:D:0.000492
] B:_Tftpfs_Parse_options_surplus_comma
] E:_Tftpfs_Parse_options_surplus_comma:N:4:F:0:D:0.000878
] B:_Tftpfs_Parse_options_rfc1350
] E:_Tftpfs_Parse_options_rfc1350:N:4:F:0:D:0.000451
] B:_Tftpfs_Parse_options_null
] E:_Tftpfs_Parse_options_null:N:4:F:0:D:0.000477
] B:_Tftpfs_Parse_options_illegal_option
] E:_Tftpfs_Parse_options_illegal_option:N:1:F:0:D:0.000553
] B:_Tftpfs_Parse_options_empty
] E:_Tftpfs_Parse_options_empty:N:4:F:0:D:0.000440
] B:_Tftpfs_Parse_options_blocksize
] E:_Tftpfs_Parse_options_blocksize:N:4:F:0:D:0.000525
] B:_Tftpfs_Parse_options_bad_value
] E:_Tftpfs_Parse_options_bad_value:N:1:F:0:D:0.000513
] B:_Tftpfs_Parse_options_all
] E:_Tftpfs_Parse_options_all:N:4:F:0:D:0.000717
] B:OACK_without_option_value
] E:OACK_without_option_value:N:46:F:0:D:0.005387
] B:OACK_without_null
] E:OACK_without_null:N:46:F:0:D:0.005515
] B:OACK_with_unknown_option
] E:OACK_with_unknown_option:N:46:F:0:D:0.004858
] B:OACK_with_surplus_option
] TFTPFS: /127.0.0.1:file.txt
] E:OACK_with_surplus_option:N:46:F:0:D:0.005297
] B:OACK_with_empty_option_value
] E:OACK_with_empty_option_value:N:46:F:0:D:0.004904
] B:OACK_with_empty_option_name
] E:OACK_with_empty_option_name:N:46:F:0:D:0.004835
] B:OACK_windowsize_too_small
] E:OACK_windowsize_too_small:N:46:F:0:D:0.004879
] B:OACK_windowsize_too_large
] E:OACK_windowsize_too_large:N:46:F:0:D:0.004924
] @&"Quit\n"
=> test end: TFTPFS
] *** TIMEOUT TIMEOUT
[101/676] p:69 f:2 u:0 e:19 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: block01.exe
<<skipping passes>>
[110/676] p:75 f:2 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: block10.exe
Result: failed
Time: 0:00:11.787417 block10.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/block10.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/block10.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block10.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block10.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/block10.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: BLOCK 10
] *** BEGIN OF TEST BLOCK 10 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] test case [access]: get and release with waiter
] I: try get
] I: get
] W: try get
] I: purge
] I: release
] I: release done
] W: get
] W: release
] W: release done
] test case [access]: get and release without waiter
] I: try get
] I: get
] I: purge
] I: release
] I: releas and release without waiter
] I: try get modified
] I: get modified
] I: purge
] I: release
] I: release done
] test case [access]: access modified and release modified with waiter
] I: try get modified
] I: get modified
] W: try get
] I: purge
] I: release modified
] I: release modified done
] W: get
] W: release
] W: release done
] test case [access]: access modified and release modified without waiter
] I: try get modified
] I: get modified
] I: purge
] I: release modified
] I: release modified done
] test case [access]: access modified and sync with waiter
] I: try get modified
] I: get modified
] W: try get
] I: purge
] I: sync
] I: sync done
] W: get
] W: release
] W: release done
] test case [access]: access modified and sync without waiter
] I: try get modified
] I: get modified
] I: purge
] I: sync
] I: sync done
] test case [access]: read and release with waiter
] I: try read
] I: read
] W: try get
] I: purge
] I: release
] I: release done
] W: get
] W: release
] W: release done
] test case [access]: read and release without waiter
] I: try read
] I: read
] I: purge
] I: release
] I: release done
] test case [access]: read and release modified with waiter
] I: try read
] I: read
] W: try get
] I: purge
] I: release modified
] I: release modified done
] W: get
] W: release
] W: release done
] test case [access]: read and release modified without waiter
] I: try read
] I: read
] I: purge
] I: release modified
] I: release modified done
] test case [access]: read and sync with waiter
] I: try read
] I: read
] W: try get
] I: purge
] I: sync
] I: sync done
] W: get
] W: release
] W: release done
] test case [access]: read and sync without waiter
] I: try read
] I: read
] I: purge
] I: sync
] I: sync done
] test case [intermediate]: release with waiter
] I: try read
] I: read
] W: try get
] I: release
] I: release done
] I: purge
] W: get
] W: release
] W: release done
] test case [intermediate]: release without waiter
] I: try read
] I: read
] I: release
] I: release done
] I: purge
] test case [intermediate]: release modified with waiter
] I: try read
] I: read
] W: try get
] I: release modified
] I: release modified done
] I: purge
] W: get
] W: release
] W: release done
] test case [intermediate]: release modified without waiter
] I: try read
] I: read
] I: release modified
] I: release modified done
] I: purge
] test case [intermediate]: sync with waiter
] I: try read
] I: read
] W: try get
] I: sync
] I: sync done
] I: purge
] W: get
] W: release
] W: release done
] @"n""\n"
] test case [iexecuting thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[111/676] p:76 f:2 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: block11.exe
<<skipping passes>>
[122/676] p:86 f:3 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: crypt01.exe
Result: test-too-long
Time: 0:05:09.850792 crypt01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/crypt01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/crypt01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/crypt01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/crypt01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/crypt01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: CRYPT 1
] *** BEGIN OF TEST CRYPT 1 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] test crypt_md5_r()
] test crypt_sha256_r()
] input: Hello world!
] salt: $5$saltstring
] expected: $5$saltstring$5B8vYYiY.CVt1RlTTf8KbXBH3hsxY/GNooZaBBGWEc5
] actual: $5$saltstring$5B8vYYiY.CVt1RlTTf8KbXBH3hsxY/GNooZaBBGWEc5
] input: Hello world!
] salt: $5$rounds=10000$saltstringsaltstring
] expected: $5$rounds=10000$saltstringsaltst$3xv.VbSHBb41AL9AvLeujZkZRBAwqFMz2.opqey6IcA
] actual: $5$rounds=10000$saltstringsaltst$3xv.VbSHBb41AL9AvLeujZkZRBAwqFMz2.opqey6IcA
] input: This is just a test
] salt: $5$rounds=5000$toolongsaltstring
] expected: $5$rounds=5000$toolongsaltstrin$Un/5jzAHMgOGZ5.mWJpuVolil07guHPvOW8mGRcvxa5
] actual: $5$rounds=5000$toolongsaltstrin$Un/5jzAHMgOGZ5.mWJpuVolil07guHPvOW8mGRcvxa5
] input: a very much longer text to encrypt. This one even stretches over morethan one line.
] salt: $5$rounds=1400$anotherlongsaltstring
] expected: $5$rounds=1400$anotherlongsalts$Rx.j8H.h8HjEDGomFU8bDkXm3XIUnzyxf12oP84Bnq1
] actual: $5$rounds=1400$anotherlongsalts$Rx.j8H.h8HjEDGomFU8bDkXm3XIUnzyxf12oP84Bnq1
] isalt string but not a short password
] salt: $5$rounds=77777$short
] expected: $5$rounds=77777$short$JiO1O3ZpDAxGJeaDIuqCoEFysAe1mZNJRs3pw0KQRd/
] actual: $5$rounds=77777$short$JiO1O3ZpDAxGJeaDIuqCoEFysAe1mZNJRs3pw0KQRd/
] nV/cZKmF/wJvD
] in $5$rounds=10$roundstoolow
] expected: $5$rounds=1000$roundstoolow$yfvwcWrQ8l/K0DAWyuPMDNHpIVlTQebY9l/gL972bIC
] actual: $5$rounds=1000$roundstoolow$yfvwcWrQ8l/K0DAWyuPMDNHpIVlTQebY9l/gL972bIC
] test crypt_sha512_r()
] input: Hello world!
] salt: $6$saltstring
] expected: $6$saltstring$svn8UoSVapNtMuq1ukKS4tPQd8iKwSMHWjl/O817G3uBnIFNjnQJuesI68u4OTLiBFdcbYEdFCoEOfaS35inz1
] actual: $6$saltstring$svn8UoSVapNtMuq1ukKS4tPQd8iKwSMHWjl/O817G3uBnIFNjnQJuesI68u4OTLiBFdcbYEdFCoEOfaS35inz1
] iVeXbDWra3Oeqh0sbHbbMCVNSnCM/UrjmM0Dp8vOuZeHBy/YTBmSK6H9qs/y3RnOaw5v.
] actual: $6$rounds=10000$saltstringsaltst$OW1/O6BYHV6BcXZu8QVeXbDWra3Oeqh0sbHbbMCVNSnCM/UrjmM0Dp8vOuZeHBy/YTBmSK6H9qs/y3RnOaw5v.
] input: This is just a test
] salt: $6$rounds=5000$toolongsaltstring
] expected: $6$rounds=5000$toolongsaltstrin$lQ8jolhgVRVhY4b5pZKaysCLi0QBxGoNeKQzQ3glMhwllF7oGDZxUhx1yxdYcz/e1JSbq3y6JMxxl8audkUEm0
] actual: $6$rounds=5000$toolongsaltstrin$lQ8jolhgVRVhY4b5pZKaysCLi0QBxGoNeKQzQ3glMhwllF7oGDZxUhx1yxdYcz/e1JSbq3y6JMxxl8audkUEm0
] input: a very much longer text to encrypt. This one even stretches over morethan one line.
] salt: $6$rounds=1400$anotherlongsaltstring
] expected: $6$rounds=1400$anotherlongsalts$POfYwTEok97VWcjxIiSOjiykti.o/pQs.wPvMxQ6Fm7I6IoYN3CmLs66x9t0oSwbtEW7o7UmJEiDwGqd8p4ur1
] actual: $6$rounds=1400$anotherlongsalts$POfYwTEok97VWcjxIiSOjiykti.o/pQs.wPvMxQ6Fm7I6IoYN3CmLs66x9t0oSwbtEW7o7UmJEiDwGqd8p4ur1
] wehave a short salt string but not a short password
] salt: $6$rounds=77777$short
] expected: $6$rounds=77777$short$WuQyW2YR.hBNpjjRhpYD/ifIw05xdfeEyQoMxIXbkvr0gge1a1x3yRULJ5CCaUeOxFmtlcGZelFl5CxtgfiAc0
] actual: $6$rounds=77777$short$WuQyW2YR.hBNpjjRhpYD/ifIw05xdfeEyQoMxIXbkvr0gge1a1x3yRULJ5CCaUeOxFmtlcGZelFl5CxtgfiAc0in a short string
] salt: $6$rounds=123456$asaltof16chars..
] expected: $6$rounds=123456$asaltof16chars..$BtCwjqMJGx5hrJhZywWvt0RLE8uZ4oPwcelCjmw2kSYu.Ec6ycULevoBK25fs2xXgMNrCzIMVcgEJAstJeonj1
] actual: $6$rounds=123456$asaltof16chars..$BtCwjqMJGx5hrJhZywWvt0RLE8uZ4oPwcelCjmw2kSYu.Ec6ycULevoBK25fs2xXgMNrCzIMVcgEJAstJeonj1
] input: imum number is still observed
] salt: $6$rounds=10$roundstoolow
] expected: $6$rounds=1000$roundstoolow$kUMsbe306n21p9R.FRkW3IGn.S9NPN0x50YhH1xhLsPuWGsUSklZt58 ello world!
] salt: saltstring
] expected: $6$saltstring$svn8UoSVapNtMuq1ukKS4tPQd8iKwSMHWjl/O817G3uBnIFNjnQJuesI68u4OTLiBFdcbYEdFCoEOfaS35inz1
] actual: $6$saltstring$svn8UoSVapNtMuq1ukKS4tPQd8iKwSMHWjl/O817G3uBnIFNjnQJuesI68u4OTLiBFdcbYEdFCoEOfaS35inz1
] tstring
] expected: $5$saltstring$5B8vYYiY.CVt1RlTTf8KbXBH3hsxY/GNooZaBBGWEc5
] actual: $5$saltstring$5B8vYYiY.CVt1RlTTf8KbXBH3hsxY/GNooZaBBGWEc5
=> test end: CRYPT 1
] *** TEST TOO LONG
[123/676] p:87 f:3 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: debugger01.exe
<<skipping passes>>
[126/676] p:90 f:3 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: devfs04.exe
Result: timeout
Time: 0:03:10.088790 devfs04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/devfs04.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/devfs04.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/devfs04.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/devfs04.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/devfs04.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: DEVFS 4
] *** BEGIN OF TEST DEVFS 4 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] Init - attempt to open the /dev/test WR mode -- OK
] Init - attempt to write to /dev/test -- OK
] Init - attempt to write to /dev/test - expect ENOSYS
] Init - attempt to open the /dev/test RD mode -- OK
] Init - attempt to read from /dev/test -- OK
] @(gdb)
=> test end: DEVFS 4
] *** TIMEOUT TIMEOUT
[127/676] p:91 f:3 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: deviceio01.exe
<<skipping passes>>
[134/676] p:98 f:3 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:06.876754 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
=> test end: libdl (RTL) 6
] [ RTEMS shutdown ]
[135/676] p:98 f:4 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[157/676] p:118 f:4 u:1 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: math.exe
Result: timeout
Time: 0:03:08.603772 math.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/math.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/math.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/math.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/math.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> Quit
=> No stack.
=> Quit
=> test end: None
] *** TIMEOUT TIMEOUT
[158/676] p:119 f:4 u:1 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: mathf.exe
<<skipping passes>>
[193/676] p:150 f:4 u:3 e:22 I:0 B:3 t:3 L:0 i:0 W:0 | powerpc/psim: termios05.exe
Result: failed
Time: 0:00:02.564406 termios05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/termios05.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/termios05.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios05.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios05.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios05.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TERMIOS 5
] *** BEGIN OF TEST TERMIOS 5 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] open(/dev/test) - OK
] Writing: This is test output.
] Transmitted 20 characters
] 54 68 69 73 20 69 73 20 74 65 73 74 20 6f 75 74 |This is test out|
] 70 75 74 2e |put. |
] Reading (expected):
] 54 65 73 74 20 69 6e 70 75 74 20 74 68 69 73 20 |Test input this |
] 69 73 2e |is. |
] Read 0 bytes from read(2)
] Error: length must be greater than zero.Echoed 2 characters
] 0d 0a |.. |
] Reading (expected):
] 31 32 33 35 08 34 35 36 2e |1235.456. |
] Read 20 bytes from read(2)
] 54 65 73 74 20 69 6e 70 75 74 20 74 68 69 73 20 |Test input this |
] 69 73 2e 0a |is.. |
] Echoed 4 characters
] 54 2e 0d 0a |T... |
] Reading (expected):
] 74 61 62 09 74 61 62 2e |tab.tab. |
] Read 10 bytes from read(2)
] 31 32 33 35 08 34 35 36 2e 0a |1235.456.. |
] Echoed 21 characters
] 31 00 00 00 00 54 68 69 73 20 69 73 20 74 65 73 |1....This is tes|
] 74 20 6f 75 74 |t out |
] Reading (expected):
] 63 72 0d |cr. |
] Read 9 bytes from read(2)
] 74 61 62 09 74 61 62 2e 0a |tab.tab.. |
] Echoed 20 characters
] 70 75 74 2e 0d 0a 54 65 73 74 20 69 6e 70 75 74 |put...Test input|
] 20 74 68 69 | thi |
] Reading (expected):
] 61 42 63 44 65 46 67 48 2e |aBcDeFgH. |
] Read 3 bytes from readb65d830e8e9957f8a1b644825934a
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[194/676] p:151 f:5 u:3 e:22 I:0 B:3 t:3 L:0 i:0 W:0 | powerpc/psim: termios06.exe
<<skipping passes>>
[217/676] p:172 f:5 u:4 e:22 I:0 B:3 t:3 L:0 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:05.632542 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
=> test end: PSX 12
] [ RTEMS shutdown ]
[218/676] p:173 f:5 u:4 e:22 I:0 B:3 t:3 L:0 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[248/676] p:202 f:6 u:4 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: psxenosys.exe
Result: failed
Time: 0:00:05.755592 psxenosys.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxenosys.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxenosys.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxenosys.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxenosys.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxenosys.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXENOSYS
] *** BEGIN OF TEST PSXENOSYS ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] lio_listio -- ENOSYS
] ERROR -- did not return ENOSYS as expected
=> test end: PSXENOSYS
] [ RTEMS shutdown ]
[249/676] p:202 f:6 u:4 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: psxfatal01.exe
<<skipping passes>>
[274/676] p:226 f:7 u:4 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:05.675495 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
=> test end: PSXKEY 8
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[275/676] p:227 f:7 u:4 e:22 I:0 B:3 t:4 L:0 i:0 W:0 | powerpc/psim: psxkey09.exe
<<skipping passes>>
[389/676] p:337 f:9 u:5 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: ticker.exe
Result: failed
Time: 0:00:05.761909 ticker.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/samples/ticker.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/samples/ticker.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/ticker.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/ticker.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/ticker.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: CLOCK TICK
] *** BEGIN OF TEST CLOCK TICK ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] TA1 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA2 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA3 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA1 - rtems_clock_get_tod - 09:00:04 12/31/1988
] TA2 - rtems_clock_get_tod - 09:00:09 12/31/1nferior 1 (process 42000) exited with code 05]
[390/676] p:337 f:9 u:5 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: unlimited.exe
Result: test-too-long
Time: 0:05:49.119777 unlimited.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/samples/unlimited.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/samples/unlimited.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/unlimited.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/unlimited.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/samples/unlimited.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: UNLIMITED TASK
] *** BEGIN OF TEST UNLIMITED TASK ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] TEST1 : auto-extend disabled.
] TEST1 : creating task 'aa00', number = 0, id = 0a010002, starting, task 0 has started.
] TEST1 : creating task 'aa01', number = 1, id = 0a010003, starting, task 1 has started.
] TEST1 : creating task 'aa02', number = 2, id = 0a010004, starting, task 2 has started.
] TEST1 : creating task 'aa03', number = 3, id = 0a010005, starting, task 3 has started.
] TEST1 : creating task 'aa04', failure, too many.
] TEST1 : signal task 0a010002 to delete, task 0 ending.
] TEST1 : signal task 0a010003 to delete, task 1 ending.
] TEST1 : signal task 0a010004 to delete, task 2 ending.
] TEST1 : signal task 0a010005 to delete, task 3 ending.
] TEST1 : completed
] TEST2 : re-allocate of index numbers, and a block free'ed and one inactive
] TEST2 : creating task 'aa00', number = 0, id = 0a010002, starting, task 0 has started.
] TEST2 : creating task 'aa01', number = 1, id = 0a010003, starting, task 1 has started.
] TEST2 : creating task 'aa02', number = 2, id = 0a010004, starting, task 2 has started.
] @"n"r"
] TEST2 : creatieating task 'aa12', number = 12, id = 0a01000e, starting, task 12 has started.
] TEST2 : creating task 'aa13', number = 13, id = 0a01000f, starting, task 13 has started.
] TEST2 : creating task 'aa14', number = 14, id = 0a010010, starting, task 14 has started.
] TEST2 : creating task 'aa15', number = 15, id = 0a010011, starting, task 15 has started.
] TEST2 : creating task 'aa16', number = 16, id = 0a010012, starting, task 16 has started.
] TEST2 : creating task 'aa17', number = 17, id = 0a010013, starting, task 17 has started.
] TEST2 : creating task 'aa18', number = 18, id = 0a010014, starting, task 18 has started.
] TEST2 : creating task 'aa19', number = 19, id = 0a010015, starting, task 19 has started.
] TEST2 : creating task 'aa20', number = 20, id = 0a010016, starting, task 20 has started.
] TEST2 : creating task 'aa21', number = 21, id = 0a010017, starting, task 21 has started.
] TEST2 : creating task 'aa22', number = 22, id = 0a010018, starting, task 22 has started.
] TEST2 : creating task 'aa23', number = 23, id = 0a010019, starting, task 23 has started.
] TEST2 : block 1 remove, signal task 0a010006, task 4 ending.
] TEST2 : block 1 remove, signal task 0a010007, task 5 ending.
] TEST2 : block 1 remove, signal task 0a010008, task 6 ending.
] TEST2 : block 1 remove, signal task 0a010009, task 7 ending.
] TEST2 : block 1 remove, signal task 0a01000a, task 8 ending.
] TEST2 : block 3 remove, signal task 0a010010, task 14 ending.
] TEST2 : block 3 remove, signal task 0a010011, task 15 ending.
] TEST2 : block 3 remove, signal task 0a010012, task 16 ending.
] TEST2 : block 3 remove, signal task 0a010013, task 17 ending.
] TEST2 : block 3 remove, signal task 0a010014, task 18 ending.
] TEST2 : creating task 'aa24', number = 24, id = 0a010010, starting, task 24 has started.
] TEST2 : creating task 'aa25', number = 25, id = 0a010011, starting, task 25 has started.
] TEST2 : creating task 'aa26', number = 26, id = 0a010012, starting, task 26 has started.
] TEST2 : creating task 'aa27', number = 27, id = 0a010013, starting, task 27 has started.
] TEST2 : creating task 'aa28', number = 28, id = 0a010014, starting, task 28 has started.
] TEST2 : creating task 'aa29', number = 29, id = 0a010006, starting, task 29 has started.
] TEST2 : creating task 'aa30', number = 30, id = 0a010007, starting, task 30 has started.
] TEST2 : creating task 'aa31', number = 31, id = 0a010008, starting, task 31 has started.
] TEST2 : creating task 'aa32', number = 32, id = 0a010009, starting, task 32 has started.
] TEST2 : creating task 'aa33', number = 33, id = 0a01000a, starting, task 33 has started.
] TEST2 : signal task 0a010002 to delete, task 0 ending.
] TEST2 : signal task 0a010003 to delete, task 1 ending.
] TEST2 : signal task 0a010004 to delete, task 2 ending.
] TEST2 : signal task 0a010005 to delete, task 3 ending.
] TEST2 : signal task 0a010010 to delete, task 24 ending.
] TEST2 : signal task 0a010011 to delete, task 25 ending.
] TEST2 : signal task 0a010012 to delete, task 26 ending.
] TEST2 : signal task 0a010013 to delete, task 27 ending.
] TEST2 : signal task 0a010014 to delete, task 28 ending.
] TEST2 : signal task 0a01000b to delete, task 9 ending.
] TEST2 : signal task 0a01000c to delete, task 10 ending.
] TEST2 : signal task 0a01000d to delete, task 11 ending.
] TEST2 : signal task 0a01000e to delete, task 12 ending.
] TEST2 : signal task 0a01000f to delete, task 13 ending.
] TEST2 : signal task 0a010006 to delete, task 29 ending.
] TEST2 : signal task 0a010007 to delete, task 30 ending.
] TEST2 : signal task 0a010008 to delete, task 31 ending.
] TEST2 : signal task 0a010009 to delete, task 32 ending.
] TEST2 : signal task 0a01000a to delete, task 33 ending.
] TEST2 : signal task 0a010015 to delete, task 19 ending.
] TEST2 : signal task 0a010016 to delete, task 20 ending.
] TEST2 : signal task 0a010017 to delete, task 21 ending.
] TEST2 : signal task 0a010018 to delete, task 22 ending.
] TEST2 : signal task 0a010019 to delete, task 23 ending.
] TEST2 : completed
] TEST3 : free more than 3 x allocation size, but not the same block,
] then free a block
] TEST3 : creating task 'aa00', number = 0, id = 0a010002, starting, task 0 has started.
] TEST3 : creating task 'aa01', number = 1, id = 0a010003, starting, task 1 has started.
] TEST3 : creating task 'aa02', number = 2, id = 0a010004, starting, task 2 has started.
] TEST3 : creating task 'aa03', number = 3, id = 0a010005, starting, task 3 has started.
] TEST3 : creating task 'aa04', number = 4, id = 0a010015, starting, task 4 has started.
] TEST3 : creating task 'aa05', number = 5, id = 0a010016, starting, task 5 has started.
] TEST3 : creating task 'aa06', number = 6, id = 0a010017, starting, task 6 has started.
] TEST3 : creating task 'aa07', number = 7, id = 0a010018, starting, task 7 has started.
] TEST3 : creating task 'aa08', number = 8, id = 0a010019, starting, task 8 has started.
] TEST3 : creating task 'aa09', number = 9, id = 0a010006, starting, task 9 has started.
] TEST3 : creating task 'aa10', number = 10, id = 0a010007, starting, task 10 has started.
] TEST3 : creating task 'aa11', number = 11, id = 0a010008, starting, task 11 has started.
] TEST3 : creating task 'aa12', number = 12, id = 0a010009, starting, task 12 has started.
] TEST3 : creating task 'aa13', number = 13, id = 0a01000a, starting, task 13 has started.
] TEST3 : creating task 'aa14', number = 14, id = 0a01000b, starting, task 14 has started.
] TEST3 : creating task 'aa15', number = 15, id = 0a01000c, starting, task 15 has started.
] TEST3 : creating task 'aa16', number = 16, id = 0a01000d, starting, task 16 has started.
] TEST3 : creating task 'aa17', number = 17, id = 0a01000e, starting, task 17 has started.
] TEST3 : creating task 'aa18', number = 18, id = 0a01000f, starting, task 18 has started.
] TEST3 : creating task 'aa19', number = 19, id = 0a010010, starting, task 19 has started.
] TEST3 : creating task 'aa20', number = 20, id = 0a010011, starting, task 20 has started.
] TEST3 : creating task 'aa21', number = 21, id = 0a010012, starting, task 21 has started.
] TEST3 : creating task 'aa22', number = 22, id = 0a010013, starting, task 22 has started.
] TEST3 : creating task 'aa23', number = 23, id = 0a010014, starting, task 23 has started.
] TEST3 : creating task 'aa24', number = 24, id = 0a01001a, starting, task 24 has started.
] TEST3 : creating task 'aa25', number = 25, id = 0a01001b, starting, task 25 has started.
] TEST3 : creating task 'aa26', number = 26, id = 0a01001c, starting, task 26 has started.
] TEST3 : creating task 'aa27', number = 27, id = 0a01001d, starting, task 27 has started.
] TEST3 : creating task 'aa28', number = 28, id = 0a01001e, starting, task 28 has started.
] TEST3 : creating task 'aa29', number = 29, id = 0a01001f, starting, task 29 has started.
] TEST3 : creating task 'aa30', number = 30, id = 0a010020, starting, task 30 has started.
] TEST3 : creating task 'aa31', number = 31, id = 0a010021, starting, task 31 has started.
] TEST3 : creating task 'aa32', number = 32, id = 0a010022, starting, task 32 has started.
] TEST3 : creating task 'aa33', number = 33, id = 0a010023, starting, task 33 has started.
] TEST3 : creating task 'aa34', number = 34, id = 0a010024, starting, task 34 has started.
] TEST3 : creating task 'aa35', number = 35, id = 0a010025, starting, task 35 has started.
] TEST3 : creating task 'aa36', number = 36, id = 0a010026, starting, task 36 has started.
] TEST3 : creating task 'aa37', number = 37, id = 0a010027, starting, task 37 has started.
] TEST3 : creating task 'aa38', number = 38, id = 0a010028, starting, task 38 has started.
] TEST3 : creating task 'aa39', number = 39, id = 0a010029, starting, task 39 has started.
] TEST3 : creating task 'aa40', number = 40, id = 0a01002a, starting, task 40 has started.
] TEST3 : creating task 'aa41', number = 41, id = 0a01002b, starting, task 41 has started.
] TEST3 : creating task 'aa42', number = 42, id = 0a01002c, starting, task 42 has started.
] TEST3 : creating task 'aa43', number = 43, id = 0a01002d, starting, task 43 has started.
] TEST3 : creating task 'aa44', number = 44, id = 0a01002e, starting, task 44 has started.
] TEST3 : creating task 'aa45', number = 45, id = 0a01002f, starting, task 45 has started.
] TEST3 : creating task 'aa46', number = 46, id = 0a010030, starting, task 46 has started.
] TEST3 : creating task 'aa47', number = 47, id = 0a010031, starting, task 47 has started.
] TEST3 : creating task 'aa48', number = 48, id = 0a010032, starting, task 48 has started.
] TEST3 : creating task 'aa49', number = 49, id = 0a010033, starting, task 49 has started.
] TEST3 : creating task 'aa50', number = 50, id = 0a010034, starting, task 50 has started.
] TEST3 : creating task 'aa51', number = 51, id = 0a010035, starting, task 51 has started.
] TEST3 : creating task 'aa52', number = 52, id = 0a010036, starting, task 52 has started.
] TEST3 : creating task 'aa53', number = 53, id = 0a010037, starting, task 53 has started.
] TEST3 : creating task 'aa54', number = 54, id = 0a010038, starting, task 54 has started.
] TEST3 : creating task 'aa55', number = 55, id = 0a010039, starting, task 55 has started.
] TEST3 : creating task 'aa56', number = 56, id = 0a01003a, starting, task 56 has started.
] TEST3 : creating task 'aa57', number = 57, id = 0a01003b, starting, task 57 has started.
] TEST3 : creating task 'aa58', number = 58, id = 0a01003c, starting, task 58 has started.
] TEST3 : creating task 'aa59', number = 59, id = 0a01003d, starting, task 59 has started.
] TEST3 : creating task 'aa60', number = 60, id = 0a01003e, starting, task 60 has started.
] TEST3 : creating task 'aa61', number = 61, id = 0a01003f, starting, task 61 has started.
] TEST3 : creating task 'aa62', number = 62, id = 0a010040, starting, task 62 has started.
] TEST3 : creating task 'aa63', number = 63, id = 0a010041, starting, task 63 has started.
] TEST3 : creating task 'aa64', number = 64, id = 0a010042, starting, task 64 has started.
] TEST3 : creating task 'aa65', number = 65, id = 0a010043, starting, task 65 has started.
] TEST3 : creating task 'aa66', number = 66, id = 0a010044, starting, task 66 has started.
] TEST3 : creating task 'aa67', number = 67, id = 0a010045, starting, task 67 has started.
] TEST3 : creating task 'aa68', number = 68, id = 0a010046, starting, task 68 has started.
] TEST3 : creating task 'aa69', number = 69, id = 0a010047, starting, task 69 has started.
] TEST3 : creating task 'aa70', number = 70, id = 0a010048, starting, task 70 has started.
] TEST3 : creating task 'aa71', number = 71, id = 0a010049, starting, task 71 has started.
] TEST3 : creating task 'aa72', number = 72, id = 0a01004a, starting, task 72 has started.
] TEST3 : creating task 'aa73', number = 73, id = 0a01004b, starting, task 73 has started.
] TEST3 : creating task 'aa74', number = 74, id = 0a01004c, starting, task 74 has started.
] TEST3 : creating task 'aa75', number = 75, id = 0a01004d, starting, task 75 has started.
] TEST3 : creating task 'aa76', number = 76, id = 0a01004e, starting, task 76 has started.
] TEST3 : creating task 'aa77', number = 77, id = 0a01004f, starting, task 77 has started.
] TEST3 : creating task 'aa78', number = 78, id = 0a010050, starting, task 78 has started.
] TEST3 : creating task 'aa79', number = 79, id = 0a010051, starting, task 79 has started.
] TEST3 : creating task 'aa80', number = 80, id = 0a010052, starting, task 80 has started.
] TEST3 : creating task 'aa81', number = 81, id = 0a010053, starting, task 81 has started.
] TEST3 : creating task 'aa82', number = 82, id = 0a010054, starting, task 82 has started.
] TEST3 : creating task 'aa83', number = 83, id = 0a010055, starting, task 83 has started.
] TEST3 : creating task 'aa84', number = 84, id = 0a010056, starting, task 84 has started.
] TEST3 : creating task 'aa85', number = 85, id = 0a010057, starting, task 85 has started.
] TEST3 : creating task 'aa86', number = 86, id = 0a010058, starting, task 86 has started.
] TEST3 : creating task 'aa87', number = 87, id = 0a010059, starting, task 87 has started.
] TEST3 : creating task 'aa88', number = 88, id = 0a01005a, starting, task 88 has started.
] TEST3 : creating task 'aa89', number = 89, id = 0a01005b, starting, task 89 has started.
] TEST3 : creating task 'aa90', number = 90, id = 0a01005c, starting, task 90 has started.
] TEST3 : creating task 'aa91', number = 91, id = 0a01005d, starting, task 91 has started.
] TEST3 : creating task 'aa92', number = 92, id = 0a01005e, starting, task 92 has started.
] TEST3 : creating task 'aa93', number = 93, id = 0a01005f, starting, task 93 has started.
] TEST3 : creating task 'aa94', number = 94, id = 0a010060, starting, task 94 has started.
] TEST3 : creating task 'aa95', number = 95, id = 0a010061, starting, task 95 has started.
] TEST3 : creating task 'aa96', number = 96, id = 0a010062, starting, task 96 has started.
] TEST3 : creating task 'aa97', number = 97, id = 0a010063, starting, task 97 has started.
] TEST3 : creating task 'aa98', number = 98, id = 0a010064, starting, task 98 has started.
] TEST3 : creating task 'aa99', number = 99, id = 0a010065, starting, task 99 has started.
] TEST3 : creating task 'ab00', number = 100, id = 0a010066, starting, task 100 has started.
] TEST3 : creating task 'ab01', number = 101, id = 0a010067, starting, task 101 has started.
] TEST3 : creating task 'ab02', number = 102, id = 0a010068, starting, task 102 has started.
] TEST3 : creating task 'ab03', number = 103, id = 0a010069, starting, task 103 has started.
] TEST3 : creating task 'ab04', number = 104, id = 0a01006a, starting, task 104 has started.
] TEST3 : creating task 'ab05', number = 105, id = 0a01006b, starting, task 105 has started.
] TEST3 : creating task 'ab06', number = 106, id = 0a01006c, starting, task 106 has started.
] TEST3 : creating task 'ab07', number = 107, id = 0a01006d, starting, task 107 has started.
] TEST3 : creating task 'ab08', number = 108, id = 0a01006e, starting, task 108 has started.
] TEST3 : creating task 'ab09', number = 109, id = 0a01006f, starting, task 109 has started.
] TEST3 : creating task 'ab10', number = 110, id = 0a010070, starting, task 110 has started.
] TEST3 : creating task 'ab11', number = 111, id = 0a010071, starting, task 111 has started.
] TEST3 : creating task 'ab12', number = 112, id = 0a010072, starting, task 112 has started.
] TEST3 : creating task 'ab13', number = 113, id = 0a010073, starting, task 113 has started.
] TEST3 : creating task 'ab14', number = 114, id = 0a010074, starting, task 114 has started.
] TEST3 : creating task 'ab15', number = 115, id = 0a010075, starting, task 115 has started.
] TEST3 : creating task 'ab16', number = 116, id = 0a010076, starting, task 116 has started.
] TEST3 : creating task 'ab17', number = 117, id = 0a010077, starting, task 117 has started.
] TEST3 : creating task 'ab18', number = 118, id = 0a010078, starting, task 118 has started.
] TEST3 : creating task 'ab19', number = 119, id = 0a010079, starting, task 119 has started.
] TEST3 : creating task 'ab20', number = 120, id = 0a01007a, starting, task 120 has started.
] TEST3 : creating task 'ab21', number = 121, id = 0a01007b, starting, task 121 has started.
] TEST3 : creating task 'ab22', number = 122, id = 0a01007c, starting, task 122 has started.
] TEST3 : creating task 'ab23', number = 123, id = 0a01007d, starting, task 123 has started.
] TEST3 : creating task 'ab24', number = 124, id = 0a01007e, starting, task 124 has started.
] TEST3 : creating task 'ab25', number = 125, id = 0a01007f, starting, task 125 has started.
] TEST3 : creating task 'ab26', number = 126, id = 0a010080, starting, task 126 has started.
] TEST3 : creating task 'ab27', number = 127, id = 0a010081, starting, task 127 has started.
] TEST3 : creating task 'ab28', number = 128, id = 0a010082, starting, task 128 has started.
] TEST3 : creating task 'ab29', number = 129, id = 0a010083, starting, task 129 has started.
] TEST3 : creating task 'ab30', number = 130, id = 0a010084, starting, task 130 has started.
] TEST3 : creating task 'ab31', number = 131, id = 0a010085, starting, task 131 has started.
] TEST3 : creating task 'ab32', number = 132, id = 0a010086, starting, task 132 has started.
] TEST3 : creating task 'ab33', number = 133, id = 0a010087, starting, task 133 has started.
] TEST3 : creating task 'ab34', number = 134, id = 0a010088, starting, task 134 has started.
] TEST3 : creating task 'ab35', number = 135, id = 0a010089, starting, task 135 has started.
] TEST3 : creating task 'ab36', number = 136, id = 0a01008a, starting, task 136 has started.
] TEST3 : creating task 'ab37', number = 137, id = 0a01008b, starting, task 137 has started.
] TEST3 : creating task 'ab38', number = 138, id = 0a01008c, starting, task 138 has started.
] TEST3 : creating task 'ab39', number = 139, id = 0a01008d, starting, task 139 has started.
] TEST3 : creating task 'ab40', number = 140, id = 0a01008e, starting, task 140 has started.
] TEST3 : creating task 'ab41', number = 141, id = 0a01008f, starting, task 141 has started.
] TEST3 : creating task 'ab42', number = 142, id = 0a010090, starting, task 142 has started.
] TEST3 : creating task 'ab43', number = 143, id = 0a010091, starting, task 143 has started.
] TEST3 : creating task 'ab44', number = 144, id = 0a010092, starting, task 144 has started.
] TEST3 : creating task 'ab45', number = 145, id = 0a010093, starting, task 145 has started.
] TEST3 : creating task 'ab46', number = 146, id = 0a010094, starting, task 146 has started.
] TEST3 : creating task 'ab47', number = 147, id = 0a010095, starting, task 147 has started.
] TEST3 : creating task 'ab48', number = 148, id = 0a010096, starting, task 148 has started.
] TEST3 : creating task 'ab49', number = 149, id = 0a010097, starting, task 149 has started.
] TEST3 : creating task 'ab50', number = 150, id = 0a010098, starting, task 150 has started.
] TEST3 : creating task 'ab51', number = 151, id = 0a010099, starting, task 151 has started.
] TEST3 : creating task 'ab52', number = 152, id = 0a01009a, starting, task 152 has started.
] TEST3 : creating task 'ab53', number = 153, id = 0a01009b, starting, task 153 has started.
] TEST3 : creating task 'ab54', number = 154, id = 0a01009c, starting, task 154 has started.
] TEST3 : creating task 'ab55', number = 155, id = 0a01009d, starting, task 155 has started.
] TEST3 : creating task 'ab56', number = 156, id = 0a01009e, starting, task 156 has started.
] TEST3 : creating task 'ab57', number = 157, id = 0a01009f, starting, task 157 has started.
] TEST3 : creating task 'ab58', number = 158, id = 0a0100a0, starting, task 158 has started.
] TEST3 : creating task 'ab59', number = 159, id = 0a0100a1, starting, task 159 has started.
] TEST3 : creating task 'ab60', number = 160, id = 0a0100a2, starting, task 160 has started.
] TEST3 : creating task 'ab61', number = 161, id = 0a0100a3, starting, task 161 has started.
] TEST3 : creating task 'ab62', number = 162, id = 0a0100a4, starting, task 162 has started.
] TEST3 : creating task 'ab63', number = 163, id = 0a0100a5, starting, task 163 has started.
] TEST3 : creating task 'ab64', number = 164, id = 0a0100a6, starting, task 164 has started.
] TEST3 : creating task 'ab65', number = 165, id = 0a0100a7, starting, task 165 has started.
] TEST3 : creating task 'ab66', number = 166, id = 0a0100a8, starting, task 166 has started.
] TEST3 : creating task 'ab67', number = 167, id = 0a0100a9, starting, task 167 has started.
] TEST3 : creating task 'ab68', number = 168, id = 0a0100aa, starting, task 168 has started.
] TEST3 : creating task 'ab69', number = 169, id = 0a0100ab, starting, task 169 has started.
] TEST3 : creating task 'ab70', number = 170, id = 0a0100ac, starting, task 170 has started.
] TEST3 : creating task 'ab71', number = 171, id = 0a0100ad, starting, task 171 has started.
] TEST3 : creating task 'ab72', number = 172, id = 0a0100ae, starting, task 172 has started.
] TEST3 : creating task 'ab73', number = 173, id = 0a0100af, starting, task 173 has started.
] TEST3 : creating task 'ab74', number = 174, id = 0a0100b0, starting, task 174 has started.
] TEST3 : creating task 'ab75', number = 175, id = 0a0100b1, starting, task 175 has started.
] TEST3 : creating task 'ab76', number = 176, id = 0a0100b2, starting, task 176 has started.
] TEST3 : creating task 'ab77', number = 177, id = 0a0100b3, starting, task 177 has started.
] TEST3 : creating task 'ab78', number = 178, id = 0a0100b4, starting, task 178 has started.
] TEST3 : creating task 'ab79', number = 179, id = 0a0100b5, starting, task 179 has started.
] TEST3 : creating task 'ab80', number = 180, id = 0a0100b6, starting, task 180 has started.
] TEST3 : creating task 'ab81', number = 181, id = 0a0100b7, starting, task 181 has started.
] TEST3 : creating task 'ab82', number = 182, id = 0a0100b8, starting, task 182 has started.
] TEST3 : creating task 'ab83', number = 183, id = 0a0100b9, starting, task 183 has started.
] TEST3 : creating task 'ab84', number = 184, id = 0a0100ba, starting, task 184 has started.
] TEST3 : creating task 'ab85', number = 185, id = 0a0100bb, starting, task 185 has started.
] TEST3 : creating task 'ab86', number = 186, id = 0a0100bc, starting, task 186 has started.
] TEST3 : creating task 'ab87', number = 187, id = 0a0100bd, starting, task 187 has started.
] TEST3 : creating task 'ab88', number = 188, id = 0a0100be, starting, task 188 has started.
] TEST3 : creating task 'ab89', number = 189, id = 0a0100bf, starting, task 189 has started.
] TEST3 : creating task 'ab90', number = 190, id = 0a0100c0, starting, task 190 has started.
] TEST3 : creating task 'ab91', number = 191, id = 0a0100c1, starting, task 191 has started.
] TEST3 : creating task 'ab92', number = 192, id = 0a0100c2, starting, task 192 has started.
] TEST3 : creating task 'ab93', number = 193, id = 0a0100c3, starting, task 193 has started.
] TEST3 : creating task 'ab94', number = 194, id = 0a0100c4, starting, task 194 has started.
] TEST3 : creating task 'ab95', number = 195, id = 0a0100c5, starting, task 195 has started.
] TEST3 : creating task 'ab96', number = 196, id = 0a0100c6, starting, task 196 has started.
] TEST3 : creating task 'ab97', number = 197, id = 0a0100c7, starting, task 197 has started.
] TEST3 : creating task 'ab98', number = 198, id = 0a0100c8, starting, task 198 has started.
] TEST3 : creating task 'ab99', number = 199, id = 0a0100c9, starting, task 199 has started.
] TEST3 : creating task 'ac00', number = 200, id = 0a0100ca, starting, task 200 has started.
] TEST3 : creating task 'ac01', number = 201, id = 0a0100cb, starting, task 201 has started.
] TEST3 : creating task 'ac02', number = 202, id = 0a0100cc, starting, task 202 has started.
] TEST3 : creating task 'ac03', number = 203, id = 0a0100cd, starting, task 203 has started.
] TEST3 : creating task 'ac04', number = 204, id = 0a0100ce, starting, task 204 has started.
] TEST3 : creating task 'ac05', number = 205, id = 0a0100cf, starting, task 205 has started.
] TEST3 : creating task 'ac06', number = 206, id = 0a0100d0, starting, task 206 has started.
] TEST3 : creating task 'ac07', number = 207, id = 0a0100d1, starting, task 207 has started.
] TEST3 : creating task 'ac08', number = 208, id = 0a0100d2, starting, task 208 has started.
] TEST3 : creating task 'ac09', number = 209, id = 0a0100d3, starting, task 209 has started.
] TEST3 : creating task 'ac10', number = 210, id = 0a0100d4, starting, task 210 has started.
] TEST3 : creating task 'ac11', number = 211, id = 0a0100d5, starting, task 211 has started.
] TEST3 : creating task 'ac12', number = 212, id = 0a0100d6, starting, task 212 has started.
] TEST3 : creating task 'ac13', number = 213, id = 0a0100d7, starting, task 213 has started.
] TEST3 : creating task 'ac14', number = 214, id = 0a0100d8, starting, task 214 has started.
] TEST3 : creating task 'ac15', number = 215, id = 0a0100d9, starting, task 215 has started.
] TEST3 : creating task 'ac16', number = 216, id = 0a0100da, starting, task 216 has started.
] TEST3 : creating task 'ac17', number = 217, id = 0a0100db, starting, task 217 has started.
] TEST3 : creating task 'ac18', number = 218, id = 0a0100dc, starting, task 218 has started.
] TEST3 : creating task 'ac19', number = 219, id = 0a0100dd, starting, task 219 has started.
] TEST3 : creating task 'ac20', number = 220, id = 0a0100de, starting, task 220 has started.
] TEST3 : creating task 'ac21', number = 221, id = 0a0100df, starting, task 221 has started.
] TEST3 : creating task 'ac22', number = 222, id = 0a0100e0, starting, task 222 has started.
] TEST3 : creating task 'ac23', number = 223, id = 0a0100e1, starting, task 223 has started.
] TEST3 : creating task 'ac24', number = 224, id = 0a0100e2, starting, task 224 has started.
] TEST3 : creating task 'ac25', number = 225, id = 0a0100e3, starting, task 225 has started.
] TEST3 : creating task 'ac26', number = 226, id = 0a0100e4, starting, task 226 has started.
] TEST3 : creating task 'ac27', number = 227, id = 0a0100e5, starting, task 227 has started.
] TEST3 : creating task 'ac28', number = 228, id = 0a0100e6, starting, task 228 has started.
] TEST3 : creating task 'ac29', number = 229, id = 0a0100e7, starting, task 229 has started.
] TEST3 : creating task 'ac30', number = 230, id = 0a0100e8, starting, task 230 has started.
] TEST3 : creating task 'ac31', number = 231, id = 0a0100e9, starting, task 231 has started.
] TEST3 : creating task 'ac32', number = 232, id = 0a0100ea, starting, task 232 has started.
] TEST3 : creating task 'ac33', number = 233, id = 0a0100eb, starting, task 233 has started.
] TEST3 : creating task 'ac34', number = 234, id = 0a0100ec, starting, task 234 has started.
] TEST3 : creating task 'ac35', number = 235, id = 0a0100ed, starting, task 235 has started.
] TEST3 : creating task 'ac36', number = 236, id = 0a0100ee, starting, task 236 has started.
] TEST3 : creating task 'ac37', number = 237, id = 0a0100ef, starting, task 237 has started.
] TEST3 : creating task 'ac38', number = 238, id = 0a0100f0, starting, task 238 has started.
] TEST3 : creating task 'ac39', number = 239, id = 0a0100f1, starting, task 239 has started.
] TEST3 : creating task 'ac40', number = 240, id = 0a0100f2, starting, task 240 has started.
] TEST3 : creating task 'ac41', number = 241, id = 0a0100f3, starting, task 241 has started.
] TEST3 : creating task 'ac42', number = 242, id = 0a0100f4, starting, task 242 has started.
] TEST3 : creating task 'ac43', number = 243, id = 0a0100f5, starting, task 243 has started.
] TEST3 : creating task 'ac44', number = 244, id = 0a0100f6, starting, task 244 has started.
] TEST3 : creating task 'ac45', number = 245, id = 0a0100f7, starting, task 245 has started.
] TEST3 : creating task 'ac46', number = 246, id = 0a0100f8, starting, task 246 has started.
] TEST3 : creating task 'ac47', number = 247, id = 0a0100f9, starting, task 247 has started.
] TEST3 : creating task 'ac48', number = 248, id = 0a0100fa, starting, task 248 has started.
] TEST3 : creating task 'ac49', number = 249, id = 0a0100fb, starting, task 249 has started.
] TEST3 : creating task 'ac50', number = 250, id = 0a0100fc, starting, task 250 has started.
] TEST3 : creating task 'ac51', number = 251, id = 0a0100fd, starting, task 251 has started.
] TEST3 : creating task 'ac52', number = 252, id = 0a0100fe, starting, task 252 has started.
] TEST3 : creating task 'ac53', number = 253, id = 0a0100ff, starting, task 253 has started.
] TEST3 : creating task 'ac54', number = 254, id = 0a010100, starting, task 254 has started.
] TEST3 : creating task 'ac55', number = 255, id = 0a010101, starting, task 255 has started.
] TEST3 : creating task 'ac56', number = 256, id = 0a010102, starting, task 256 has started.
] TEST3 : creating task 'ac57', number = 257, id = 0a010103, starting, task 257 has started.
] TEST3 : creating task 'ac58', number = 258, id = 0a010104, starting, task 258 has started.
] TEST3 : creating task 'ac59', number = 259, id = 0a010105, starting, task 259 has started.
] TEST3 : creating task 'ac60', number = 260, id = 0a010106, starting, task 260 has started.
] TEST3 : creating task 'ac61', number = 261, id = 0a010107, starting, task 261 has started.
] TEST3 : creating task 'ac62', number = 262, id = 0a010108, starting, task 262 has started.
] TEST3 : creating task 'ac63', number = 263, id = 0a010109, starting, task 263 has started.
] TEST3 : creating task 'ac64', number = 264, id = 0a01010a, starting, task 264 has started.
] TEST3 : creating task 'ac65', number = 265, id = 0a01010b, starting, task 265 has started.
] TEST3 : creating task 'ac66', number = 266, id = 0a01010c, starting, task 266 has started.
] TEST3 : creating task 'ac67', number = 267, id = 0a01010d, starting, task 267 has started.
] TEST3 : creating task 'ac68', number = 268, id = 0a01010e, starting, task 268 has started.
] TEST3 : creating task 'ac69', number = 269, id = 0a01010f, starting, task 269 has started.
] TEST3 : creating task 'ac70', number = 270, id = 0a010110, starting, task 270 has started.
] TEST3 : creating task 'ac71', number = 271, id = 0a010111, starting, task 271 has started.
] TEST3 : creating task 'ac72', number = 272, id = 0a010112, starting, task 272 has started.
] TEST3 : creating task 'ac73', number = 273, id = 0a010113, starting, task 273 has started.
] TEST3 : creating task 'ac74', number = 274, id = 0a010114, starting, task 274 has started.
] TEST3 : creating task 'ac75', number = 275, id = 0a010115, starting, task 275 has started.
] TEST3 : creating task 'ac76', number = 276, id = 0a010116, starting, task 276 has started.
] TEST3 : creating task 'ac77', number = 277, id = 0a010117, starting, task 277 has started.
] TEST3 : creating task 'ac78', number = 278, id = 0a010118, starting, task 278 has started.
] TEST3 : creating task 'ac79', number = 279, id = 0a010119, starting, task 279 has started.
] TEST3 : creating task 'ac80', number = 280, id = 0a01011a, starting, task 280 has started.
] TEST3 : creating task 'ac81', number = 281, id = 0a01011b, starting, task 281 has started.
] TEST3 : creating task 'ac82', number = 282, id = 0a01011c, starting, task 282 has started.
] TEST3 : creating task 'ac83', number = 283, id = 0a01011d, starting, task 283 has started.
] TEST3 : creating task 'ac84', number = 284, id = 0a01011e, starting, task 284 has started.
] TEST3 : creating task 'ac85', number = 285, id = 0a01011f, starting, task 285 has started.
] TEST3 : creating task 'ac86', number = 286, id = 0a010120, starting, task 286 has started.
] TEST3 : creating task 'ac87', number = 287, id = 0a010121, starting, task 287 has started.
] TEST3 : creating task 'ac88', number = 288, id = 0a010122, starting, task 288 has started.
] TEST3 : creating task 'ac89', number = 289, id = 0a010123, starting, task 289 has started.
] TEST3 : creating task 'ac90', number = 290, id = 0a010124, starting, task 290 has started.
] TEST3 : creating task 'ac91', number = 291, id = 0a010125, starting, task 291 has started.
] TEST3 : creating task 'ac92', number = 292, id = 0a010126, starting, task 292 has started.
] TEST3 : creating task 'ac93', number = 293, id = 0a010127, starting, task 293 has started.
] TEST3 : creating task 'ac94', number = 294, id = 0a010128, starting, task 294 has started.
] TEST3 : creating task 'ac95', number = 295, id = 0a010129, starting, task 295 has started.
] TEST3 : creating task 'ac96', number = 296, id = 0a01012a, starting, task 296 has started.
] TEST3 : creating task 'ac97', number = 297, id = 0a01012b, starting, task 297 has started.
] TEST3 : creating task 'ac98', number = 298, id = 0a01012c, starting, task 298 has started.
] TEST3 : creating task 'ac99', number = 299, id = 0a01012d, starting, task 299 has started.
] TEST3 : creating task 'ad00', number = 300, id = 0a01012e, starting, task 300 has started.
] TEST3 : creating task 'ad01', number = 301, id = 0a01012f, starting, task 301 has started.
] TEST3 : creating task 'ad02', number = 302, id = 0a010130, starting, task 302 has started.
] TEST3 : creating task 'ad03', number = 303, id = 0a010131, starting, task 303 has started.
] TEST3 : creating task 'ad04', number = 304, id = 0a010132, starting, task 304 has started.
] TEST3 : creating task 'ad05', number = 305, id = 0a010133, starting, task 305 has started.
] TEST3 : creating task 'ad06', number = 306, id = 0a010134, starting, task 306 has started.
] TEST3 : creating task 'ad07', number = 307, id = 0a010135, starting, task 307 has started.
] TEST3 : creating task 'ad08', number = 308, id = 0a010136, starting, task 308 has started.
] TEST3 : creating task 'ad09', number = 309, id = 0a010137, starting, task 309 has started.
] TEST3 : creating task 'ad10', number = 310, id = 0a010138, starting, task 310 has started.
] TEST3 : creating task 'ad11', number = 311, id = 0a010139, starting, task 311 has started.
] TEST3 : creating task 'ad12', number = 312, id = 0a01013a, starting, task 312 has started.
] TEST3 : creating task 'ad13', number = 313, id = 0a01013b, starting, task 313 has started.
] TEST3 : creating task 'ad14', number = 314, id = 0a01013c, starting, task 314 has started.
] TEST3 : creating task 'ad15', number = 315, id = 0a01013d, starting, task 315 has started.
] TEST3 : creating task 'ad16', number = 316, id = 0a01013e, starting, task 316 has started.
] TEST3 : creating task 'ad17', number = 317, id = 0a01013f, starting, task 317 has started.
] TEST3 : creating task 'ad18', number = 318, id = 0a010140, starting, task 318 has started.
] TEST3 : creating task 'ad19', number = 319, id = 0a010141, starting, task 319 has started.
] TEST3 : creating task 'ad20', number = 320, id = 0a010142, starting, task 320 has started.
] TEST3 : creating task 'ad21', number = 321, id = 0a010143, starting, task 321 has started.
] TEST3 : creating task 'ad22', number = 322, id = 0a010144, starting, task 322 has started.
] TEST3 : creating task 'ad23', number = 323, id = 0a010145, starting, task 323 has started.
] TEST3 : creating task 'ad24', number = 324, id = 0a010146, starting, task 324 has started.
] TEST3 : creating task 'ad25', number = 325, id = 0a010147, starting, task 325 has started.
] TEST3 : creating task 'ad26', number = 326, id = 0a010148, starting, task 326 has started.
] TEST3 : creating task 'ad27', number = 327, id = 0a010149, starting, task 327 has started.
] TEST3 : creating task 'ad28', number = 328, id = 0a01014a, starting, task 328 has started.
] TEST3 : creating task 'ad29', number = 329, id = 0a01014b, starting, task 329 has started.
] TEST3 : creating task 'ad30', number = 330, id = 0a01014c, starting, task 330 has started.
] TEST3 : creating task 'ad31', number = 331, id = 0a01014d, starting, task 331 has started.
] TEST3 : creating task 'ad32', number = 332, id = 0a01014e, starting, task 332 has started.
] TEST3 : creating task 'ad33', number = 333, id = 0a01014f, starting, task 333 has started.
] TEST3 : creating task 'ad34', number = 334, id = 0a010150, starting, task 334 has started.
] TEST3 : creating task 'ad35', number = 335, id = 0a010151, starting, task 335 has started.
] TEST3 : creating task 'ad36', number = 336, id = 0a010152, starting, task 336 has started.
] TEST3 : creating task 'ad37', number = 337, id = 0a010153, starting, task 337 has started.
] TEST3 : creating task 'ad38', number = 338, id = 0a010154, starting, task 338 has started.
] TEST3 : creating task 'ad39', number = 339, id = 0a010155, starting, task 339 has started.
] TEST3 : creating task 'ad40', number = 340, id = 0a010156, starting, task 340 has started.
] TEST3 : creating task 'ad41', number = 341, id = 0a010157, starting, task 341 has started.
] TEST3 : creating task 'ad42', number = 342, id = 0a010158, starting, task 342 has started.
] TEST3 : creating task 'ad43', number = 343, id = 0a010159, starting, task 343 has started.
] TEST3 : creating task 'ad44', number = 344, id = 0a01015a, starting, task 344 has started.
] TEST3 : creating task 'ad45', number = 345, id = 0a01015b, starting, task 345 has started.
] TEST3 : creating task 'ad46', number = 346, id = 0a01015c, starting, task 346 has started.
] TEST3 : creating task 'ad47', number = 347, id = 0a01015d, starting, task 347 has started.
] TEST3 : creating task 'ad48', number = 348, id = 0a01015e, starting, task 348 has started.
] TEST3 : creating task 'ad49', number = 349, id = 0a01015f, starting, task 349 has started.
] TEST3 : creating task 'ad50', number = 350, id = 0a010160, starting, task 350 has started.
] TEST3 : creating task 'ad51', number = 351, id = 0a010161, starting, task 351 has started.
] TEST3 : creating task 'ad52', number = 352, id = 0a010162, starting, task 352 has started.
] TEST3 : creating task 'ad53', number = 353, id = 0a010163, starting, task 353 has started.
] TEST3 : creating task 'ad54', number = 354, id = 0a010164, starting, task 354 has started.
] TEST3 : creating task 'ad55', number = 355, id = 0a010165, starting, task 355 has started.
] TEST3 : creating task 'ad56', number = 356, id = 0a010166, starting, task 356 has started.
] TEST3 : creating task 'ad57', number = 357, id = 0a010167, starting, task 357 has started.
] TEST3 : creating task 'ad58', number = 358, id = 0a010168, starting, task 358 has started.
] TEST3 : creating task 'ad59', number = 359, id = 0a010169, starting, task 359 has started.
] TEST3 : creating task 'ad60', number = 360, id = 0a01016a, starting, task 360 has started.
] TEST3 : creating task 'ad61', number = 361, id = 0a01016b, starting, task 361 has started.
] TEST3 : creating task 'ad62', number = 362, id = 0a01016c, starting, task 362 has started.
] TEST3 : creating task 'ad63', number = 363, id = 0a01016d, starting, task 363 has started.
] TEST3 : creating task 'ad64', number = 364, id = 0a01016e, starting, task 364 has started.
] TEST3 : creating task 'ad65', number = 365, id = 0a01016f, starting, task 365 has started.
] TEST3 : creating task 'ad66', number = 366, id = 0a010170, starting, task 366 has started.
] TEST3 : creating task 'ad67', number = 367, id = 0a010171, starting, task 367 has started.
] TEST3 : creating task 'ad68', number = 368, id = 0a010172, starting, task 368 has started.
] TEST3 : creating task 'ad69', number = 369, id = 0a010173, starting, task 369 has started.
] TEST3 : creating task 'ad70', number = 370, id = 0a010174, starting, task 370 has started.
] TEST3 : creating task 'ad71', number = 371, id = 0a010175, starting, task 371 has started.
] TEST3 : creating task 'ad72', number = 372, id = 0a010176, starting, task 372 has started.
] TEST3 : creating task 'ad73', number = 373, id = 0a010177, starting, task 373 has started.
] TEST3 : creating task 'ad74', number = 374, id = 0a010178, starting, task 374 has started.
] TEST3 : creating task 'ad75', number = 375, id = 0a010179, starting, task 375 has started.
] TEST3 : creating task 'ad76', number = 376, id = 0a01017a, starting, task 376 has started.
] TEST3 : creating task 'ad77', number = 377, id = 0a01017b, starting, task 377 has started.
] TEST3 : creating task 'ad78', number = 378, id = 0a01017c, starting, task 378 has started.
] TEST3 : creating task 'ad79', number = 379, id = 0a01017d, starting, task 379 has started.
] TEST3 : creating task 'ad80', number = 380, id = 0a01017e, starting, task 380 has started.
] TEST3 : creating task 'ad81', number = 381, id = 0a01017f, starting, task 381 has started.
] TEST3 : creating task 'ad82', number = 382, id = 0a010180, starting, task 382 has started.
] TEST3 : creating task 'ad83', number = 383, id = 0a010181, starting, task 383 has started.
] TEST3 : creating task 'ad84', number = 384, id = 0a010182, starting, task 384 has started.
] TEST3 : creating task 'ad85', number = 385, id = 0a010183, starting, task 385 has started.
] TEST3 : creating task 'ad86', number = 386, id = 0a010184, starting, task 386 has started.
] TEST3 : creating task 'ad87', number = 387, id = 0a010185, starting, task 387 has started.
] TEST3 : creating task 'ad88', number = 388, id = 0a010186, starting, task 388 has started.
] TEST3 : creating task 'ad89', number = 389, id = 0a010187, starting, task 389 has started.
] TEST3 : creating task 'ad90', number = 390, id = 0a010188, starting, task 390 has started.
] TEST3 : creating task 'ad91', number = 391, id = 0a010189, starting, task 391 has started.
] TEST3 : creating task 'ad92', number = 392, id = 0a01018a, starting, task 392 has started.
] TEST3 : creating task 'ad93', number = 393, id = 0a01018b, starting, task 393 has started.
] TEST3 : creating task 'ad94', number = 394, id = 0a01018c, starting, task 394 has started.
] TEST3 : creating task 'ad95', number = 395, id = 0a01018d, starting, task 395 has started.
] TEST3 : creating task 'ad96', number = 396, id = 0a01018e, starting, task 396 has started.
] TEST3 : creating task 'ad97', number = 397, id = 0a01018f, starting, task 397 has started.
] TEST3 : creating task 'ad98', number = 398, id = 0a010190, starting, task 398 has started.
] TEST3 : creating task 'ad99', number = 399, id = 0a010191, starting, task 399 has started.
] TEST3 : creating task 'ae00', number = 400, id = 0a010192, starting, task 400 has started.
] TEST3 : creating task 'ae01', number = 401, id = 0a010193, starting, task 401 has started.
] TEST3 : creating task 'ae02', number = 402, id = 0a010194, starting, task 402 has started.
] TEST3 : creating task 'ae03', number = 403, id = 0a010195, starting, task 403 has started.
] TEST3 : creating task 'ae04', number = 404, id = 0a010196, starting, task 404 has started.
] TEST3 : creating task 'ae05', number = 405, id = 0a010197, starting, task 405 has started.
] TEST3 : creating task 'ae06', number = 406, id = 0a010198, starting, task 406 has started.
] TEST3 : creating task 'ae07', number = 407, id = 0a010199, starting, task 407 has started.
] TEST3 : creating task 'ae08', number = 408, id = 0a01019a, starting, task 408 has started.
] TEST3 : creating task 'ae09', number = 409, id = 0a01019b, starting, task 409 has started.
] TEST3 : creating task 'ae10', number = 410, id = 0a01019c, starting, task 410 has started.
] TEST3 : creating task 'ae11', number = 411, id = 0a01019d, starting, task 411 has started.
] TEST3 : creating task 'ae12', number = 412, id = 0a01019e, starting, task 412 has started.
] TEST3 : creating task 'ae13', number = 413, id = 0a01019f, starting, task 413 has started.
] TEST3 : creating task 'ae14', number = 414, id = 0a0101a0, starting, task 414 has started.
] TEST3 : creating task 'ae15', number = 415, id = 0a0101a1, starting, task 415 has started.
] TEST3 : creating task 'ae16', number = 416, id = 0a0101a2, starting, task 416 has started.
] TEST3 : creating task 'ae17', number = 417, id = 0a0101a3, starting, task 417 has started.
] TEST3 : creating task 'ae18', number = 418, id = 0a0101a4, starting, task 418 has started.
] TEST3 : creating task 'ae19', number = 419, id = 0a0101a5, starting, task 419 has started.
] TEST3 : creating task 'ae20', number = 420, id = 0a0101a6, starting, task 420 has started.
] TEST3 : creating task 'ae21', number = 421, id = 0a0101a7, starting, task 421 has started.
] TEST3 : creating task 'ae22', number = 422, id = 0a0101a8, starting, task 422 has started.
] TEST3 : creating task 'ae23', number = 423, id = 0a0101a9, starting, task 423 has started.
] TEST3 : creating task 'ae24', number = 424, id = 0a0101aa, starting, task 424 has started.
] TEST3 : creating task 'ae25', number = 425, id = 0a0101ab, starting, task 425 has started.
] TEST3 : creating task 'ae26', number = 426, id = 0a0101ac, starting, task 426 has started.
] TEST3 : creating task 'ae27', number = 427, id = 0a0101ad, starting, task 427 has started.
] TEST3 : creating task 'ae28', number = 428, id = 0a0101ae, starting, task 428 has started.
] TEST3 : creating task 'ae29', number = 429, id = 0a0101af, starting, task 429 has started.
] TEST3 : creating task 'ae30', number = 430, id = 0a0101b0, starting, task 430 has started.
] TEST3 : creating task 'ae31', number = 431, id = 0a0101b1, starting, task 431 has started.
] TEST3 : creating task 'ae32', number = 432, id = 0a0101b2, starting, task 432 has started.
] TEST3 : creating task 'ae33', number = 433, id = 0a0101b3, starting, task 433 has started.
] TEST3 : creating task 'ae34', number = 434, id = 0a0101b4, starting, task 434 has started.
] TEST3 : creating task 'ae35', number = 435, id = 0a0101b5, starting, task 435 has started.
] TEST3 : creating task 'ae36', number = 436, id = 0a0101b6, starting, task 436 has started.
] TEST3 : creating task 'ae37', number = 437, id = 0a0101b7, starting, task 437 has started.
] TEST3 : creating task 'ae38', number = 438, id = 0a0101b8, starting, task 438 has started.
] TEST3 : creating task 'ae39', number = 439, id = 0a0101b9, starting, task 439 has started.
] TEST3 : creating task 'ae40', number = 440, id = 0a0101ba, starting, task 440 has started.
] TEST3 : creating task 'ae41', number = 441, id = 0a0101bb, starting, task 441 has started.
] TEST3 : creating task 'ae42', number = 442, id = 0a0101bc, starting, task 442 has started.
] TEST3 : creating task 'ae43', number = 443, id = 0a0101bd, starting, task 443 has started.
] TEST3 : creating task 'ae44', number = 444, id = 0a0101be, starting, task 444 has started.
] TEST3 : creating task 'ae45', number = 445, id = 0a0101bf, starting, task 445 has started.
] TEST3 : creating task 'ae46', number = 446, id = 0a0101c0, starting, task 446 has started.
] TEST3 : creating task 'ae47', number = 447, id = 0a0101c1, starting, task 447 has started.
] TEST3 : creating task 'ae48', number = 448, id = 0a0101c2, starting, task 448 has started.
] TEST3 : creating task 'ae49', number = 449, id = 0a0101c3, starting, task 449 has started.
] TEST3 : creating task 'ae50', number = 450, id = 0a0101c4, starting, task 450 has started.
] TEST3 : creating task 'ae51', number = 451, id = 0a0101c5, starting, task 451 has started.
] TEST3 : creating task 'ae52', number = 452, id = 0a0101c6, starting, task 452 has started.
] TEST3 : creating task 'ae53', number = 453, id = 0a0101c7, starting, task 453 has started.
] TEST3 : creating task 'ae54', number = 454, id = 0a0101c8, starting, task 454 has started.
] TEST3 : creating task 'ae55', number = 455, id = 0a0101c9, starting, task 455 has started.
] TEST3 : creating task 'ae56', number = 456, id = 0a0101ca, starting, task 456 has started.
] TEST3 : creating task 'ae57', number = 457, id = 0a0101cb, starting, task 457 has started.
] TEST3 : creating task 'ae58', number = 458, id = 0a0101cc, starting, task 458 has started.
] TEST3 : creating task 'ae59', number = 459, id = 0a0101cd, starting, task 459 has started.
] TEST3 : creating task 'ae60', number = 460, id = 0a0101ce, starting, task 460 has started.
] TEST3 : creating task 'ae61', number = 461, id = 0a0101cf, starting, task 461 has started.
] TEST3 : creating task 'ae62', number = 462, id = 0a0101d0, starting, task 462 has started.
] TEST3 : creating task 'ae63', number = 463, id = 0a0101d1, starting, task 463 has started.
] TEST3 : creating task 'ae64', number = 464, id = 0a0101d2, starting, task 464 has started.
] TEST3 : creating task 'ae65', number = 465, id = 0a0101d3, starting, task 465 has started.
] TEST3 : creating task 'ae66', number = 466, id = 0a0101d4, starting, task 466 has started.
] TEST3 : creating task 'ae67', number = 467, id = 0a0101d5, starting, task 467 has started.
] TEST3 : creating task 'ae68', number = 468, id = 0a0101d6, starting, task 468 has started.
] TEST3 : creating task 'ae69', number = 469, id = 0a0101d7, starting, task 469 has started.
] TEST3 : creating task 'ae70', number = 470, id = 0a0101d8, starting, task 470 has started.
] TEST3 : creating task 'ae71', number = 471, id = 0a0101d9, starting, task 471 has started.
] TEST3 : creating task 'ae72', number = 472, id = 0a0101da, starting, task 472 has started.
] TEST3 : creating task 'ae73', number = 473, id = 0a0101db, starting, task 473 has started.
] TEST3 : creating task 'ae74', number = 474, id = 0a0101dc, starting, task 474 has started.
] TEST3 : creating task 'ae75', number = 475, id = 0a0101dd, starting, task 475 has started.
] TEST3 : creating task 'ae76', number = 476, id = 0a0101de, starting, task 476 has started.
] TEST3 : creating task 'ae77', number = 477, id = 0a0101df, starting, task 477 has started.
] TEST3 : creating task 'ae78', number = 478, id = 0a0101e0, starting, task 478 has started.
] TEST3 : creating task 'ae79', number = 479, id = 0a0101e1, starting, task 479 has started.
] TEST3 : creating task 'ae80', number = 480, id = 0a0101e2, starting, task 480 has started.
] TEST3 : creating task 'ae81', number = 481, id = 0a0101e3, starting, task 481 has started.
] TEST3 : creating task 'ae82', number = 482, id = 0a0101e4, starting, task 482 has started.
] TEST3 : creating task 'ae83', number = 483, id = 0a0101e5, starting, task 483 has started.
] TEST3 : creating task 'ae84', number = 484, id = 0a0101e6, starting, task 484 has started.
] TEST3 : creating task 'ae85', number = 485, id = 0a0101e7, starting, task 485 has started.
] TEST3 : creating task 'ae86', number = 486, id = 0a0101e8, starting, task 486 has started.
] TEST3 : creating task 'ae87', number = 487, id = 0a0101e9, starting, task 487 has started.
] TEST3 : creating task 'ae88', number = 488, id = 0a0101ea, starting, task 488 has started.
] TEST3 : creating task 'ae89', number = 489, id = 0a0101eb, starting, task 489 has started.
] TEST3 : creating task 'ae90', number = 490, id = 0a0101ec, starting, task 490 has started.
] TEST3 : creating task 'ae91', number = 491, id = 0a0101ed, starting, task 491 has started.
] TEST3 : creating task 'ae92', number = 492, id = 0a0101ee, starting, task 492 has started.
=> test end: UNLIMITED TASK
] *** TEST TOO LONG
[391/676] p:337 f:9 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: sp01.exe
[392/676] p:338 f:9 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: sp02.exe
Result: failed
Time: 0:00:08.612224 sp02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp02.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp02.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp02.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp02.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp02.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 2
] *** BEGIN OF TEST SP 2 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] E"
] ***ND OF TEST SP 2 ***
=> test end: SP 2
] [ RTEMS shutdown ]
[393/676] p:339 f:9 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: sp03.exe
<<skipping passes>>
[414/676] p:358 f:11 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: sp25.exe
Result: timeout
Time: 0:03:16.554688 sp25.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp25.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp25.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp25.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp25.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp25.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 25
] *** BEGIN OF TEST SP 25 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] TA1 - rtems_region_ident - 0x32010001
] TA1 - rtems_region_get_segment - wait on 64 byte segment from region 1
] TA1 - got segment from region 1 - 0x00000040
] TA1 - rtems_region_get_segment_size from - 0x00000040
] TA1 - got segment size of 124
] TA1 - rtems_region_get_segment - wait on 128 byte segment from region 1
] TA1 - got segment from region 1 - 0x000000c0
] TA1 - rtems_region_get_segment - wait on 256 byte segment from region 1
] TA1 - got segment from region 1 - 0x00000180
] TA1 - rtems_region_get_segment - wait on 512 byte segment from region 1
] TA1 - got segment from region 1 - 0x000002c0
] TA1 - rtems_region_get_segment - wait on 1024 byte segment from region 1
] TA1 - got segment from region 1 - 0x00000500
] TA1 - rtems_region_get_segment - wait on 2048 byte segment from region 1
] TA1 - got segment from region 1 - 0x00000940
] TA1 - rtems_region_get_segment - wait on 4096 byte segment from region 1
] TA1 - got segment from region 1 - 0x00001180
] TA1 - rtems_region_get_segment - wait on 8192 byte segment from region 1
] @(gdb)
=> test end: SP 25
] *** TIMEOUT TIMEOUT
[415/676] p:359 f:11 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: sp26.exe
<<skipping passes>>
[457/676] p:401 f:11 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: sp71.exe
Result: failed
Time: 0:00:06.195859 sp71.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp71.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp71.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp71.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp71.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp71.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 71
] *** BEGIN OF TEST SP 71 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[458/676] p:402 f:12 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: sp72.exe
<<skipping passes>>
[470/676] p:413 f:12 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: spchain.exe
Result: timeout
Time: 0:03:13.941495 spchain.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spchain.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spchain.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spchain.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spchain.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spchain.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPCHAIN
] *** BEGIN OF TEST SPCHAIN ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] Init - Initialize chain empty
] INIT - Verify rtems_chain_insert
] INIT - Verify _Chain_Initialize_one
] INIT - Verify rtems_chain_is_first
] INIT - Verify rtems_chain_is_last
] INIT - Verify rtems_chain_append_with_empty_check
] @"d"(gdb)
=> test end: SPCHAIN
] *** TIMEOUT TIMEOUT
[471/676] p:414 f:12 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: spclock_err01.exe
<<skipping passes>>
[478/676] p:421 f:12 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: spcpucounter01.exe
Result: timeout
Time: 0:03:37.135427 spcpucounter01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spcpucounter01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spcpucounter01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcpucounter01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcpucounter01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcpucounter01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPCPUCOUNTER 1
] *** BEGIN OF TEST SPCPUCOUNTER 1 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] CPU counter frequency: 1410065408Hz
] nanoseconds for frequency count ticks: 1000000000
] test delay nanoseconds (10 times)
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] ns busy wait duration: 1000156ns
] ns busy wait relative to clock tick: 0.000156
] test delay ticks (10 times)
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] ticks busy wait duration: 1000155ns
] ticks busy wait relative to clock tick: 0.000155
] test overheads (10 times)
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] overhead read: 1 ticks, 0ns
] overhead difference: 2 ticks, 1ns
] overhead delay ns: 25 ticks, 17ns
] overhead delay ticks: 11 ticks, 7ns
] @"(gdb)
=> test end: SPCPUCOUNTER 1
] *** TIMEOUT TIMEOUT
[479/676] p:422 f:12 u:6 e:22 I:0 B:3 t:5 L:1 i:0 W:0 | powerpc/psim: spcpuset01.exe
<<skipping passes>>
[521/676] p:463 f:13 u:6 e:22 I:0 B:3 t:6 L:2 i:0 W:0 | powerpc/psim: spinternalerror02.exe
Result: timeout
Time: 0:03:05.979530 spinternalerror02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spinternalerror02.exe
=> test end: None
] *** TIMEOUT TIMEOUT
[522/676] p:463 f:13 u:6 e:22 I:0 B:3 t:6 L:2 i:0 W:0 | powerpc/psim: spintr_err01.exe
<<skipping passes>>
[528/676] p:468 f:13 u:6 e:22 I:0 B:3 t:6 L:2 i:0 W:0 | powerpc/psim: spintrcritical08.exe
Result: timeout
Time: 0:03:10.445777 spintrcritical08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spintrcritical08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spintrcritical08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spintrcritical08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPINTRCRITICAL 8
] *** BEGIN OF TEST SPINTRCRITICAL 8 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] A:SPINTRCRITICAL 8
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] S:Version:6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] S:BSP:psim
] S:BuildLabel:DEFAULT
=> test end: SPINTRCRITICAL 8
] *** TIMEOUT TIMEOUT
[529/676] p:469 f:13 u:6 e:22 I:0 B:3 t:6 L:2 i:0 W:0 | powerpc/psim: spintrcritical09.exe
<<skipping passes>>
[558/676] p:496 f:13 u:6 e:22 I:0 B:3 t:8 L:2 i:0 W:0 | powerpc/psim: sppps01.exe
Result: timeout
Time: 0:03:09.964314 sppps01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sppps01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sppps01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sppps01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sppps01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sppps01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPPPS 1
] *** BEGIN OF TEST SPPPS 1 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] A:SPPPS 1
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] S:Version:6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] S:BSP:psim
] S:BuildLabel:DEFAULT
=> test end: SPPPS 1
] *** TIMEOUT TIMEOUT
[559/676] p:497 f:13 u:6 e:22 I:0 B:3 t:8 L:2 i:0 W:0 | powerpc/psim: spprintk.exe
<<skipping passes>>
[572/676] p:510 f:13 u:6 e:22 I:0 B:3 t:8 L:2 i:0 W:0 | powerpc/psim: spsem_err01.exe
Result: timeout
Time: 0:03:13.305996 spsem_err01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spsem_err01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spsem_err01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsem_err01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsem_err01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsem_err01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP SEMAPHORE ERROR 01
] *** BEGIN OF TEST SP SEMAPHORE ERROR 01 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] TA1 - rtems_semaphore_create - RTEMS_SUCCESSFUL
] TA1 - rtems_semaphore_release - RTEMS_UNSATISFIED
] TA1 - rtems_semaphore_delete - RTEMS_SUCCESSFUL
] TA1 - rtems_semaphore_create - RTEMS_INVALID_NAME
] TA1 - rtems_semaphore_create - RTEMS_INVALID_ADDRESS
] TA1 - rtems_semaphore_create - 1 - RTEMS_SUCCESSFUL
] TA1 - rtems_semaphore_create - 2 - RTEMS_SUCCESSFUL
] TA1 - rtems_semaphore_create - 3 - RTEMS_TOO_MANY
] TA1 - rtems_semaphore_create - FIFO and inherit - RTEMS_NOT_DEFINED
] TA1 - rtems_semaphore_create - FIFO and ceiling - RTEMS_NOT_DEFINED
] TA1 - rtems_semaphore_create - ceiling and inherit - RTEMS_NOT_DEFINED
] TA1 - rtems_semaphore_create - RTEMS_NOT_DEFINED
] TA1 - rtems_semaphore_create - RTEMS_INVALID_NUMBER
] TA1 - rtems_semaphore_delete - RTEMS_INVALID_ID
] TA1 - rtems_semaphore_delete - local RTEMS_INVALID_ID
] TA1 - rtems_semaphore_ident - global RTEMS_INVALID_NAME
] TA1 - rtems_semaphore_ident - local RTEMS_INVALID_NAME
] TA1 - rtems_semaphore_release - RTEMS_INVALID_ID
] TA1 - rtems_semaphore_flush - RTEMS_INVALID_ID
=> test end: SP SEMAPHORE ERROR 01
] *** TIMEOUT TIMEOUT
[573/676] p:511 f:13 u:6 e:22 I:0 B:3 t:8 L:2 i:0 W:0 | powerpc/psim: spsem_err02.exe
<<skipping passes>>
[575/676] p:513 f:13 u:6 e:22 I:0 B:3 t:8 L:2 i:0 W:0 | powerpc/psim: spsimplesched01.exe
Result: failed
Time: 0:00:04.073496 spsimplesched01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spsimplesched01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spsimplesched01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsimplesched01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsimplesched01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spsimplesched01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPSIMPLESCHED 1
] *** BEGIN OF TEST SPSIMPLESCHED 1 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] TA1 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA2 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA3 - rtems_clock_get_tod - 09:00:00 12/31/1988
] TA1 - rtems_clock_get_tod - 09:00:04 12/31/1988
] @"8""\n"
=> [Inferior 1 (process 42000) exited with code 05]
[576/676] p:513 f:14 u:6 e:22 I:0 B:3 t:8 L:2 i:0 W:0 | powerpc/psim: spsimplesched02.exe
<<skipping passes>>
[610/676] p:545 f:14 u:6 e:22 I:0 B:3 t:10 L:2 i:0 W:0 | powerpc/psim: spwatchdog.exe
Result: timeout
Time: 0:03:10.628662 spwatchdog.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spwatchdog.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spwatchdog.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spwatchdog.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spwatchdog.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spwatchdog.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPWATCHDOG
] *** BEGIN OF TEST SPWATCHDOG ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] INIT - rtems_timer_create - creating timer 1
] INIT - timer 1 has id (0x12010001)
] TA1 - rtems_timer_ident - identing timer 1
] TA1 - timer 1 has id (0x12010001)
] TA1 - rtems_clock_get_tod - 09:00:00 12/31/1988
=> test end: SPWATCHDOG
] *** TIMEOUT TIMEOUT
[611/676] p:546 f:14 u:6 e:22 I:0 B:3 t:10 L:2 i:0 W:0 | powerpc/psim: spwkspace.exe
<<skipping passes>>
[631/676] p:566 f:14 u:6 e:22 I:0 B:3 t:10 L:2 i:0 W:0 | powerpc/psim: tm20.exe
Result: failed
Time: 0:00:06.846383 tm20.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tm20.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tm20.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm20.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm20.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm20.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TIME TEST 20
] *** BEGIN OF TEST TIME TEST 20 ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] rtems_partition_create: only case - 352
] rtems_region_create: only case - 452
] rtems_partition_get_buffer: available - 56
] rtems_partition_get_buffer: not available - 49
] rtems_partition_return_buffer: only case - 63
] @@"t"
] rtems_partition_delete: only case ing thread ID: 0x0a010002
] executing thread name: TIM1
=> [Inferior 1 (process 42000) exited with code 05]
[632/676] p:568 f:14 u:6 e:22 I:0 B:3 t:10 L:2 i:0 W:0 | powerpc/psim: tm21.exe
<<skipping passes>>
[648/676] p:581 f:15 u:6 e:22 I:0 B:3 t:11 L:2 i:0 W:0 | powerpc/psim: tmck.exe
Result: timeout
Time: 0:03:12.388710 tmck.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tmck.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tmck.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmck.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmck.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmck.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TIME CHECKER
] *** BEGIN OF TEST TIME CHECKER ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] Units may not be in microseconds for this test!!!
] 5 100
] Total time = 500
] Average time = 5
] Time Check: NULL timer stopped at - 6
] Time Check: LOOP (1000) timer stopped at - 3505
] Time Check: LOOP (10000) timer stopped at - 35005
=> test end: TIME CHECKER
] *** TIMEOUT TIMEOUT
[649/676] p:582 f:15 u:6 e:22 I:0 B:3 t:11 L:2 i:0 W:0 | powerpc/psim: tmcontext01.exe
<<skipping passes>>
[651/676] p:586 f:15 u:6 e:22 I:0 B:3 t:11 L:2 i:0 W:0 | powerpc/psim: tmonetoone.exe
Result: timeout
Time: 0:03:11.225227 tmonetoone.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmonetoone.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TMONETOONE
] *** BEGIN OF TEST TMONETOONE ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] yield
=> test end: TMONETOONE
] *** TIMEOUT TIMEOUT
[652/676] p:586 f:15 u:6 e:22 I:0 B:3 t:11 L:2 i:0 W:0 | powerpc/psim: tmtimer01.exe
<<skipping passes>>
[661/676] p:592 f:16 u:6 e:22 I:0 B:3 t:12 L:2 i:0 W:0 | powerpc/psim: ts-userext.exe
Result: timeout
Time: 0:03:13.852740 ts-userext.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/validation/ts-userext.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-userext.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TestsuitesUserext
] *** BEGIN OF TEST TestsuitesUserext ***
] *** TEST VERSION: 6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] A:TestsuitesUserext
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 8488d28da6bfa233a90c2e80898696fd8de15534, Newlib 1339af4)
] S:Version:6.0.0.6dee3075426b65d830e8e9957f8a1b644825934a
] S:BSP:psim
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:FxbUPMFAfdnPCU2b0Y4l-hl4WMdj1U-2DWddZSVVsUA=
] S:RTEMS_DEBUG:0
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:RtemsUserextValUserext
=> #0 0x000076cc in ppc_interrupt_disable () at ../../../cpukit/score/cpu/powerpc/include/rtems/powerpc/registers.h:717
=> #3 0x00007a70 in rtems_timecounter_tick () at ../../../cpukit/include/rtems/timecounter.h:101
=> #4 clockHandler () at ../../../bsps/powerpc/shared/clock/clock-ppc-dec.c:118
=> test end: TestsuitesUserext
] *** TIMEOUT TIMEOUT
[662/676] p:594 f:16 u:6 e:22 I:0 B:3 t:12 L:2 i:0 W:0 | powerpc/psim: ts-validation-0.exe
<<skipping passes>>
[676/676] p:606 f:16 u:6 e:22 I:0 B:3 t:13 L:2 i:0 W:0 | powerpc/psim: ts-validation-tls-1.exe
Passed: 610
Failed: 16
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 16
Test too long: 2
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 676
Failures:
block10.exe
dl06.exe
fsimfsgeneric01.exe
imfs_fspatheval.exe
psx12.exe
psxenosys.exe
psxkey08.exe
sp02.exe
sp71.exe
spsimplesched01.exe
termios05.exe
ticker.exe
tm20.exe
minimum.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
devfs04.exe
math.exe
mdosfs_fsscandir01.exe
mrfs_fstime.exe
sp25.exe
spchain.exe
spcpucounter01.exe
spinternalerror02.exe
spintrcritical08.exe
sppps01.exe
spsem_err01.exe
spwatchdog.exe
tftpfs.exe
tmck.exe
tmonetoone.exe
ts-userext.exe
Test too long:
crypt01.exe
unlimited.exe
Average test time: 0:00:02.168229
Testing time : 0:24:25.723012
More information about the build
mailing list