[rtems-test] powerpc/psim: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:613 Failed:13 Timeout:17 Test-Too-long:0 Invalid:1 Wrong:0
OAR Tester for CentOS 7
rtems-tester at oarcorp.com
Mon Sep 16 17:51:17 UTC 2024
Testing time : 0:22:02.659387
Average test time: 0:00:01.956596
Host
====
Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
Configuration
=============
Version: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
Summary
=======
Passed: 613
Failed: 13
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 17
Test too long: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 676
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
psxreaddir.exe
sp20.exe
spconfig01.exe
termios05.exe
ttest01.exe
minimum.exe
regulator01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
complex.exe
mimfs_fserror.exe
monitor02.exe
psxdevctl01.exe
psxmsgq04.exe
psxndbm01.exe
psxpasswd01.exe
psxsignal06.exe
sp21.exe
sp51.exe
sp63.exe
sp70.exe
spcbssched03.exe
tm22.exe
tm29.exe
tmtimer01.exe
ts-validation-acfg-1.exe
Invalid:
tar03.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-6/tools/6/bin/rtems-test --rtems-tools=/home/tester/rtems-cron-6/tools/6 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64
Python: 2.7.5 (default, Nov 14 2023, 16:14:06) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]
Host: Linux-3.10.0-1160.119.1.el7.x86_64-x86_64-with-centos-7.9.2009-Core (Linux VM-CentOS7 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 x86_64)
[ 1/676] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/676] p:7 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:11.613318 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
=> test end: FSIMFSGENERIC 1
] [ RTEMS shutdown ]
] RTEMS version: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
[ 16/676] p:7 f:0 u:0 e:0 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[ 71/676] p:48 f:1 u:0 e:11 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mimfs_fserror.exe
Result: timeout
Time: 0:03:15.467756 mimfs_fserror.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/fstests/mimfs_fserror.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSERROR MOUNTED IMFS
] *** BEGIN OF TEST FSERROR MOUNTED IMFS ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] Initializing filesystem MOUNTED IMFS
] Testing open with arguments: "name01, O_CREAT | O_EXCL" EXPECT "EEXIST"
] PASS
] Testing mkdir with arguments: "name01, mode" EXPECT "EEXIST"
] PASS
] Testing open with arguments: "name02, O_WRONLY" EXPECT "EISDIR"
] PASS
] Testing open with arguments: "name02, O_RDWR" EXPECT "EISDIR"
] PASS
] Testing open with arguments: "name, O_WRONLY" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing open with arguments: """, O_WRONLY" EXPECT "ENOENT"
] PASS
] Testing open with arguments: "name03, O_WRONLY" EXPECT "ENOENT"
] PASS
] Testing mkdir with arguments: "name, mode" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing mkdir with arguments: """, mode" EXPECT "ENOENT"
] PASS
] Testing open with arguments: "name, O_WRONLY" EXPECT "ENOTDIR"
] PASS
] Testing mkdir with arguments: "name, mode" EXPECT "ENOTDIR"
] PASS
] Testing close with arguments: "-1" EXPECT "EBADF"
] PASS
] Testing close with arguments: "100" EXPECT "EBADF"
] PASS
] @"\\"
] @"\\"
] Testing rename with arguments: "name01, """ EXPECT "ENOENT"
] PASS
] Testing rename with arguments: "name03, name" EXPECT "ENOTDIR"
] PASS
] Testing truncate with arguments: "file, -1" EXPECT "EINVAL"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""tmp"" EXPECT "ENOTEMPTY"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""."" EXPECT "EINVAL"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""tmp/."" EXPECT "EINVAL"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: """" EXPECT "ENOENT"
] PASS
] Testing rmdir with arguments: "nonexistence" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing unlink with arguments: """" EXPECT "ENOENT"
] PASS
] Testing unlink with arguments: "nonexistence" EXPECT "ENOENT"
] PASS
] @"\\"
] @"\\"
] Testing rmdir with arguments: ""tmp/file"" EXPECT "ENOTDIR"
] PASS
] @"\\"
] @"\\"
] Testing unlink with arguments: ""tmp/file/dir"" EXPECT "ENOTDIR"
] PASS
] Testing read with arguments: "fd, readbuf, 10" EXPECT "EBADF"
] PASS
] Testing read with arguments: "100, readbuf, 10" EXPECT "EBADF"
] PASS
] Testing write with arguments: "fd, databuf, 10" EXPECT "EBADF"
] PASS
] Testing write with arguments: "fd, readbuf, 10" EXPECT "EBADF"
] PASS
] Testing lseek with arguments: "fd, -100, SEEK_END" EXPECT "EINVAL"
] PASS
] Testing lseek with arguments: "fd, -100, SEEK_CUR" EXPECT "EINVAL"
] PASS
] Testing lseek with arguments: "fd, -100, SEEK_SET" EXPECT "EINVAL"
] PASS
=> test end: FSERROR MOUNTED IMFS
] *** TIMEOUT TIMEOUT
[ 72/676] p:48 f:1 u:0 e:12 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mimfs_fslink.exe
<<skipping passes>>
[120/676] p:86 f:1 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: complex.exe
Result: timeout
Time: 0:03:11.542760 complex.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/complex.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/complex.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/complex.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/complex.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/complex.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: COMPLEX
] *** BEGIN OF TEST COMPLEX ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] cabs : 1.414214
] cacos : 0.904557 -1.061275i
] cacosh : 1.061275 0.904557i
] carg : 0.785398
] casin : 0.666239 1.061275i
] casinh : 1.061275 0.666239i
] catan : 1.017222 0.402359i
] catanh : 0.402359 1.017222i
] ccos : 0.833730 -0.988898i
] ccosh : 0.833730 0.988898i
] cexp : 1.468694 2.287355i
] cimag : 1.000000
] clog : 0.346574 0.785398i
] conj : 1.000000 -1.000000i
] cpow : 2.807879 1.317865i
] cproj : 1.000000 1.000000i
] creal : 1.000000
] csin : 1.298458 0.634964i
] csinh : 0.634964 1.298458i
] csqrt : 1.098684 0.455090i
] ctan : 0.271753 1.083923i
] ctanh : 1.083923 0.271753i
] cabsf : 1.414214
] cacosf : 0.904557 -1.061275i
] cacoshf: 1.061275 0.904557i
] cargf : 0.785398
] casinf : 0.666239 1.061275i
] casinhf: 1.061275 0.666239i
] catanf : 1.017222 0.402359i
] catanhf: 0.402359 1.017222i
] ccosf : 0.833730 -0.988898i
] ccoshf : 0.833730 0.988898i
] cexpf : 1.468694 2.287355i
] cimagf : 1.000000
] clogf : 0.346574 0.785398i
] conjf : 1.000000 -1.000000i
] cpowf : 2.807879 1.317865i
] cprojf : 1.000000 1.000000i
] crealf : 1.000000
=> Quit
=> No stack.
=> test end: COMPLEX
] *** TIMEOUT TIMEOUT
[121/676] p:88 f:1 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: cpuuse.exe
<<skipping passes>>
[134/676] p:100 f:1 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:07.362684 dl06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
=> test end: libdl (RTL) 6
] [ RTEMS shutdown ]
[135/676] p:101 f:1 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[162/676] p:126 f:2 u:1 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: monitor02.exe
Result: timeout
Time: 0:03:08.032195 monitor02.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/monitor02.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/monitor02.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/monitor02.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/monitor02.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/monitor02.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: MONITOR 2
] *** BEGIN OF TEST MONITOR 2 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] ===> task
] ID NAME SHED PRI STATE MODES EVENTS WAITINFO
] ------------------------------------------------------------------------------
] 0a010001 UI1 UPD 10 READY P:T:nA NONE
] ===> task 32
] @"(gdb)
=> test end: MONITOR 2
] *** TIMEOUT TIMEOUT
[163/676] p:127 f:2 u:1 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: mouse01.exe
<<skipping passes>>
[187/676] p:148 f:3 u:2 e:22 I:0 B:3 t:1 L:0 i:0 W:0 | powerpc/psim: tar03.exe
Result: invalid
Time: 0:00:00.763587 tar03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/tar03.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/tar03.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/tar03.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/tar03.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/tar03.exe
] e24d0, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[188/676] p:148 f:3 u:2 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: termios.exe
<<skipping passes>>
[193/676] p:152 f:3 u:3 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: termios05.exe
Result: failed
Time: 0:00:06.897493 termios05.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/termios05.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/termios05.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios05.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios05.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/termios05.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TERMIOS 5
] *** BEGIN OF TEST TERMIOS 5 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] open(/dev/test) - OK
] Writing: This is test output.
] Transmitted 20 characters
] 54 68 69 73 20 69 73 20 74 65 73 74 20 6f 75 74 |This is test out|
] 70 75 74 2e |put. |
] Reading (expected):
] 54 65 73 74 20 69 6e 70 75 74 20 74 68 69 73 20 |Test input this |
] 69 73 2e |is. |
] Read 0 bytes from read(2)
] Error: length must be greater than zero.Echoed 2 characters
] 0d 0a |.. |
] Reading (expected):
] 31 32 33 35 08 34 35 36 2e |1235.456. |
] Read 20 bytes from read(2)
] 54 65 73 74 20 69 6e 70 75 74 20 74 68 69 73 20 |Test input this |
] 69 73 2e 0a |is.. |
] Echoed 4 characters
] 54 2e 0d 0a |T... |
] Reading (expected):
] 74 61 62 09 74 61 62 2e |tab.tab. |
] Read 10 bytes from read(2)
] 31 32 33 35 08 34 35 36 2e 0a |1235.456.. |
] Echoed 21 characters
] 31 00 00 00 00 54 68 69 73 20 69 73 20 74 65 73 |1....This is tes|
] 74 20 6f 75 74 |t out |
] Reading (expected):
] 63 72 0d |cr. |
] Read 9 bytes from read(2)
] 74 61 62 09 74 61 62 2e 0a |tab.tab.. |
] Echoed 20 characters
] 70 75 74 2e 0d 0a 54 65 73 74 20 69 6e 70 75 74 |put...Test input|
] 20 74 68 69 | thi |
] Reading (expected):
] 61 42 63 44 65 46 67 48 2e |aBcDeFgH. |
] Read 3 bytes from read00628bd4ac7a364797cb5e7ad92ba
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[194/676] p:153 f:3 u:3 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: termios06.exe
<<skipping passes>>
[201/676] p:159 f:4 u:3 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: ttest01.exe
Result: failed
Time: 0:01:13.244147 ttest01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/ttest01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/ttest01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/ttest01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/ttest01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/libtests/ttest01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TTEST 1
] *** BEGIN OF TEST TTEST 1 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] A:ttest01
] S:Platform:RTEMS
] S:Compiler:*
] S:Version:*
] S:BSP:*
] S:BuildLabel:*
] S:TargetHash:SHA256:*
] S:RTEMS_DEBUG:*
] S:RTEMS_MULTIPROCESSING:*
] S:RTEMS_POSIX_API:*
] S:RTEMS_PROFILING:*
] S:RTEMS_SMP:*
] B:zalloc_auto
] P:0:0:UI1:test-malloc.c:35
] P:1:0:UI1:test-malloc.c:36
] P:2:0:UI1:test-malloc.c:26
] E:zalloc_auto:N:3:F:0:D:0.001000
] B:wrong_step
] P:0:0:UI1:test-plan.c:6
] F:1:0:UI1:test-plan.c:7:planned step (2)
] E:wrong_step:N:2:F:1:D:0.001000
] B:verbosity_changes
] F:3:0:UI1:test-verbosity.c:12:normal: check fails -> with output
] P:4:0:UI1:test-verbosity.c:14
] F:5:0:UI1:test-verbosity.c:15:verbose: check fails -> with output
] E:verbosity_changes:N:6:F:3:D:0.001000
] B:timer
] P:0:0:UI1:test-rtems.c:26
] P:1:0:UI1:test-rtems.c:29
] P:2:0:UI1:test-rtems.c:39
] P:3:0:ISR:test-rtems.c:14
] P:4:0:ISR:test-rtems.c:15
] P:5:0:UI1:test-rtems.c:44
] P:6:0:UI1:test-rtems.c:45
] P:7:0:UI1:test-rtems.c:48
] E:timer:N:8:F:0:D:0.001000
] B:time_to_string
] P:0:0:UI1:test-time.c:11
] P:1:0:UI1:test-time.c:12
] P:2:0:UI1:test-time.c:13
] P:3:0:UI1:test-time.c:14
] P:4:0:UI1:test-time.c:17
] P:5:0:UI1:test-time.c:18
] E:time_to_string:N:6:F:0:D:0.001000
] B:time
] P:0:0:UI1:test-time.c:55
] P:1:0:UI1:test-time.c:56
] P:2:0:UI1:test-time.c:57
] P:3:0:UI1:test-time.c:58
] P:4:0:UI1:test-time.c:61
] P:5:0:UI1:test-time.c:63
] P:6:0:UI1:test-time.c:64
] P:7:0:UI1:test-time.c:67
] P:8:0:UI1:test-time.c:69
] P:9:0:UI1:test-time.c:70
] P:10:0:UI1:test-time.c:73
] P:11:0:UI1:test-time.c:75
] P:12:0:UI1:test-time.c:76
] P:13:0:UI1:test-time.c:79
] P:14:0:UI1:test-time.c:81
] P:15:0:UI1:test-time.c:82
] P:16:0:UI1:test-time.c:85
] P:17:0:UI1:test-time.c:87
] P:18:0:UI1:test-time.c:88
] P:19:0:UI1:test-time.c:91
] P:20:0:UI1:test-time.c:93
] P:21:0:UI1:test-time.c:94
] P:22:0:UI1:test-time.c:97
] P:23:0:UI1:test-time.c:99
] P:24:0:UI1:test-time.c:100
] P:25:0:UI1:test-time.c:103
] P:26:0:UI1:test-time.c:105
] P:27:0:UI1:test-time.c:106
] P:28:0:UI1:test-time.c:109
] P:29:0:UI1:test-time.c:111
] P:30:0:UI1:test-time.c:112
] P:31:0:UI1:test-time.c:115
] P:32:0:UI1:test-time.c:117
] P:33:0:UI1:test-time.c:118
] P:34:0:UI1:test-time.c:121
] P:35:0:UI1:test-time.c:123
] P:36:0:UI1:test-time.c:124
] P:37:0:UI1:test-time.c:127
] P:38:0:UI1:test-time.c:129
] P:39:0:UI1:test-time.c:130
] E:time:N:40:F:0:D:0.001000
] B:ticks
] P:0:0:UI1:test-time.c:147
] P:1:0:UI1:test-time.c:151
] P:2:0:UI1:test-time.c:152
] P:3:0:UI1:test-time.c:172
] P:4:0:UI1:test-time.c:173
] P:5:0:UI1:test-time.c:174
] P:6:0:UI1:test-time.c:175
] E:ticks:N:7:F:0:D:0.001000
] B:tick
] P:0:0:UI1:test-time.c:44
] E:tick:N:1:F:0:D:0.001000
] B:test_psx_success
] P:0:0:UI1:test-psx.c:31
] F:1:0:UI1:test-psx.c:32:-1 == 0, 0
] F:*:0:UI1:test-psx.c:34:-1 == 0, 0
] P:2:0:UI1:test-psx.c:35
] F:3:0:UI1:test-psx.c:36:-1 == 0, 0
] E:test_psx_success:N:4:F:3:D:0.001000
] B:test_psx_error
] P:0:0:UI1:test-psx.c:19
] F:1:0:UI1:test-psx.c:20:-1 == -1, ENOMEM == ERANGE
] F:2:0:UI1:test-psx.c:21:0 == -1, ENOMEM == ENOMEM
] F:*:0:UI1:test-psx.c:23:-1 == -1, ENOMEM == ERANGE
] F:*:0:UI1:test-psx.c:24:0 == -1, ENOMEM == ENOMEM
] P:3:0:UI1:test-psx.c:25
] F:4:0:UI1:test-psx.c:26:0 == -1, ENOMEM == ENOMEM
] E:test_psx_error:N:5:F:5:D:0.001000
] B:test_eno_success
] P:0:0:UI1:test-eno.c:16
] F:1:0:UI1:test-eno.c:17:ENOMEM == 0
] F:*:0:UI1:test-eno.c:19:ENOMEM == 0
] P:2:0:UI1:test-eno.c:20
] F:3:0:UI1:test-eno.c:21:ENOMEM == 0
] E:test_eno_success:N:4:F:3:D:0.001000
] B:test_eno
] P:0:0:UI1:test-eno.c:6
] F:1:0:UI1:test-eno.c:7:ENOMEM == ERANGE
] F:*:0:UI1:test-eno.c:9:ENOMEM == ERANGE
] P:2:0:UI1:test-eno.c:10
] F:3:0:UI1:test-eno.c:11:ENOMEM == ERANGE
] E:test_eno:N:4:F:3:D:0.001000
] B:steps
] P:0:0:UI1:test-plan.c:31
] P:1:0:UI1:test-plan.c:33
] P:2:0:UI1:test-plan.c:34
] E:steps:N:3:F:0:D:0.001000
] B:step_assert_true
] P:0:0:UI1:test-checks.c:8
] F:1:0:UI1:test-checks.c:9:a
] E:step_assert_true:N:2:F:1:D:0.001000
] B:step_assert_null
] P:0:0:UI1:test-checks.c:136
] F:1:0:UI1:test-checks.c:137:&a == NULL
] E:step_assert_null:N:2:F:1:D:0.001000
] B:step_assert_not_null
] P:0:0:UI1:test-checks.c:159
] F:1:0:UI1:test-checks.c:160:NULL != NULL
] E:step_assert_not_null:N:2:F:1:D:0.001000
] B:step_assert_ne_ushort
] P:0:0:UI1:test-checks.c:739
] F:1:0:UI1:test-checks.c:740:1 != 1
] E:step_assert_ne_ushort:N:2:F:1:D:0.001000
] B:step_assert_ne_uptr
] P:0:0:UI1:test-checks.c:2563
] F:1:0:UI1:test-checks.c:2564:1 != 1
] E:step_assert_ne_uptr:N:2:F:1:D:0.001000
] B:step_assert_ne_ulong
] P:0:0:UI1:test-checks.c:1195
] F:1:0:UI1:test-checks.c:1196:1 != 1
] E:step_assert_ne_ulong:N:2:F:1:D:0.001000
] B:step_assert_ne_ull
] P:0:0:UI1:test-checks.c:1423
] F:1:0:UI1:test-checks.c:1424:1 != 1
] E:step_assert_ne_ull:N:2:F:1:D:0.001000
] B:step_assert_ne_uint
] P:0:0:UI1:test-checks.c:967
] F:1:0:UI1:test-checks.c:968:1 != 1
] E:step_assert_ne_uint:N:2:F:1:D:0.001000
] B:step_assert_ne_uchar
] P:0:0:UI1:test-checks.c:511
] F:1:0:UI1:test-checks.c:512:1 != 1
] E:step_assert_ne_uchar:N:2:F:1:D:0.001000
] B:step_assert_ne_u8
] P:0:0:UI1:test-checks.c:1651
] F:1:0:UI1:test-checks.c:1652:1 != 1
] E:step_assert_ne_u8:N:2:F:1:D:0.001000
] B:step_assert_ne_u64
] P:0:0:UI1:test-checks.c:2335
] F:1:0:UI1:test-checks.c:2336:1 != 1
] E:step_assert_ne_u64:N:2:F:1:D:0.001000
] B:step_assert_ne_u32
] P:0:0:UI1:test-checks.c:2107
] F:1:0:UI1:test-checks.c:2108:1 != 1
] E:step_assert_ne_u32:N:2:F:1:D:0.001000
] B:step_assert_ne_u16
] P:0:0:UI1:test-checks.c:1879
] F:1:0:UI1:test-checks.c:1880:1 != 1
] E:step_assert_ne_u16:N:2:F:1:D:0.001000
] B:step_assert_ne_sz
] P:0:0:UI1:test-checks.c:2791
] F:1:0:UI1:test-checks.c:2792:1 != 1
] E:step_assert_ne_sz:N:2:F:1:D:0.001000
] B:step_assert_ne_str
] P:0:0:UI1:test-checks.c:258
] F:1:0:UI1:test-checks.c:259:"a" != "a"
] E:step_assert_ne_str:N:2:F:1:D:0.001000
] B:step_assert_ne_ssz
] P:0:0:UI1:test-checks.c:2677
] F:1:0:UI1:test-checks.c:2678:1 != 1
] E:step_assert_ne_ssz:N:2:F:1:D:0.001000
] B:step_assert_ne_short
] P:0:0:UI1:test-checks.c:625
] F:1:0:UI1:test-checks.c:626:1 != 1
] E:step_assert_ne_short:N:2:F:1:D:0.001000
] B:step_assert_ne_schar
] P:0:0:UI1:test-checks.c:397
] F:1:0:UI1:test-checks.c:398:1 != 1
] E:step_assert_ne_schar:N:2:F:1:D:0.001000
] B:step_assert_ne_ptr
] P:0:0:UI1:test-checks.c:112
] F:1:0:UI1:test-checks.c:113:&a != &a
] E:step_assert_ne_ptr:N:2:F:1:D:0.001000
] B:step_assert_ne_nstr
] P:0:0:UI1:test-checks.c:313
] F:1:0:UI1:test-checks.c:314:"aaa" != "aaa"
] E:step_assert_ne_nstr:N:2:F:1:D:0.001000
] B:step_assert_ne_mem
] P:0:0:UI1:test-checks.c:208
] F:1:0:UI1:test-checks.c:209:memcmp(&a, &a, sizeof(a)) != 0
] E:step_assert_ne_mem:N:2:F:1:D:0.001000
] B:step_assert_ne_long
] P:0:0:UI1:test-checks.c:1081
] F:1:0:UI1:test-checks.c:1082:1 != 1
] E:step_assert_ne_long:N:2:F:1:D:0.001000
] B:step_assert_ne_ll
] P:0:0:UI1:test-checks.c:1309
] F:1:0:UI1:test-checks.c:1310:1 != 1
] E:step_assert_ne_ll:N:2:F:1:D:0.001000
] B:step_assert_ne_iptr
] P:0:0:UI1:test-checks.c:2449
] F:1:0:UI1:test-checks.c:2450:1 != 1
] E:step_assert_ne_iptr:N:2:F:1:D:0.001000
] B:step_assert_ne_int
] P:0:0:UI1:test-checks.c:853
] F:1:0:UI1:test-checks.c:854:1 != 1
] E:step_assert_ne_int:N:2:F:1:D:0.001000
] B:step_assert_ne_i8
] P:0:0:UI1:test-checks.c:1537
] F:1:0:UI1:test-checks.c:1538:1 != 1
] E:step_assert_ne_i8:N:2:F:1:D:0.001000
] B:step_assert_ne_i64
] P:0:0:UI1:test-checks.c:2221
] F:1:0:UI1:test-checks.c:2222:1 != 1
] E:step_assert_ne_i64:N:2:F:1:D:0.001000
] B:step_assert_ne_i32
] P:0:0:UI1:test-checks.c:1993
] F:1:0:UI1:test-checks.c:1994:1 != 1
] E:step_assert_ne_i32:N:2:F:1:D:0.001000
] B:step_assert_ne_i16
] P:0:0:UI1:test-checks.c:1765
] F:1:0:UI1:test-checks.c:1766:1 != 1
] E:step_assert_ne_i16:N:2:F:1:D:0.001000
] B:step_assert_ne_char
] P:0:0:UI1:test-checks.c:359
] F:1:0:UI1:test-checks.c:360:'1' != '1'
] E:step_assert_ne_char:N:2:F:1:D:0.001000
] B:step_assert_ne
] P:0:0:UI1:test-checks.c:65
] F:1:0:UI1:test-checks.c:66:2 != 2
] E:step_assert_ne:N:2:F:1:D:0.001000
] B:step_assert_lt_ushort
] P:0:0:UI1:test-checks.c:815
] F:1:0:UI1:test-checks.c:816:3 < 3
] E:step_assert_lt_ushort:N:2:F:1:D:0.001000
] B:step_assert_lt_uptr
] P:0:0:UI1:test-checks.c:2639
] F:1:0:UI1:test-checks.c:2640:3 < 3
] E:step_assert_lt_uptr:N:2:F:1:D:0.001000
] B:step_assert_lt_ulong
] P:0:0:UI1:test-checks.c:1271
] F:1:0:UI1:test-checks.c:1272:3 < 3
] E:step_assert_lt_ulong:N:2:F:1:D:0.001000
] B:step_assert_lt_ull
] P:0:0:UI1:test-checks.c:1499
] F:1:0:UI1:test-checks.c:1500:3 < 3
] E:step_assert_lt_ull:N:2:F:1:D:0.001000
] B:step_assert_lt_uint
] P:0:0:UI1:test-checks.c:1043
] F:1:0:UI1:test-checks.c:1044:3 < 3
] E:step_assert_lt_uint:N:2:F:1:D:0.001000
] B:step_assert_lt_uchar
] P:0:0:UI1:test-checks.c:587
] F:1:0:UI1:test-checks.c:588:3 < 3
] E:step_assert_lt_uchar:N:2:F:1:D:0.001000
] B:step_assert_lt_u8
] P:0:0:UI1:test-checks.c:1727
] F:1:0:UI1:test-checks.c:1728:3 < 3
] E:step_assert_lt_u8:N:2:F:1:D:0.001000
] B:step_assert_lt_u64
] P:0:0:UI1:test-checks.c:2411
] F:1:0:UI1:test-checks.c:2412:3 < 3
] E:step_assert_lt_u64:N:2:F:1:D:0.001000
] B:step_assert_lt_u32
] P:0:0:UI1:test-checks.c:2183
] F:1:0:UI1:test-checks.c:2184:3 < 3
] E:step_assert_lt_u32:N:2:F:1:D:0.001000
] B:step_assert_lt_u16
] P:0:0:UI1:test-checks.c:1955
] F:1:0:UI1:test-checks.c:1956:3 < 3
] E:step_assert_lt_u16:N:2:F:1:D:0.001000
] B:step_assert_lt_sz
] P:0:0:UI1:test-checks.c:2867
] F:1:0:UI1:test-checks.c:2868:3 < 3
] E:step_assert_lt_sz:N:2:F:1:D:0.001000
] B:step_assert_lt_ssz
] P:0:0:UI1:test-checks.c:2753
] F:1:0:UI1:test-checks.c:2754:3 < 3
] E:step_assert_lt_ssz:N:2:F:1:D:0.001000
] B:step_assert_lt_short
] P:0:0:UI1:test-checks.c:701
] F:1:0:UI1:test-checks.c:702:3 < 3
] E:step_assert_lt_short:N:2:F:1:D:0.001000
] B:step_assert_lt_schar
] P:0:0:UI1:test-checks.c:473
] F:1:0:UI1:test-checks.c:474:3 < 3
] E:step_assert_lt_schar:N:2:F:1:D:0.001000
] B:step_assert_lt_long
] P:0:0:UI1:test-checks.c:1157
] F:1:0:UI1:test-checks.c:1158:3 < 3
] E:step_assert_lt_long:N:2:F:1:D:0.001000
] B:step_assert_lt_ll
] P:0:0:UI1:test-checks.c:1385
] F:1:0:UI1:test-checks.c:1386:3 < 3
] E:step_assert_lt_ll:N:2:F:1:D:0.001000
] B:step_assert_lt_iptr
] P:0:0:UI1:test-checks.c:2525
] F:1:0:UI1:test-checks.c:2526:3 < 3
] E:step_assert_lt_iptr:N:2:F:1:D:0.001000
] B:step_assert_lt_int
] P:0:0:UI1:test-checks.c:929
] F:1:0:UI1:test-checks.c:930:3 < 3
] E:step_assert_lt_int:N:2:F:1:D:0.001000
] B:step_assert_lt_i8
] P:0:0:UI1:test-checks.c:1613
] F:1:0:UI1:test-checks.c:1614:3 < 3
] E:step_assert_lt_i8:N:2:F:1:D:0.001000
] B:step_assert_lt_i64
] P:0:0:UI1:test-checks.c:2297
] F:1:0:UI1:test-checks.c:2298:3 < 3
] E:step_assert_lt_i64:N:2:F:1:D:0.001000
] B:step_assert_lt_i32
] P:0:0:UI1:test-checks.c:2069
] F:1:0:UI1:test-checks.c:2070:3 < 3
] E:step_assert_lt_i32:N:2:F:1:D:0.001000
] B:step_assert_lt_i16
] P:0:0:UI1:test-checks.c:1841
] F:1:0:UI1:test-checks.c:1842:3 < 3
] E:step_assert_lt_i16:N:2:F:1:D:0.001000
] B:step_assert_le_ushort
] P:0:0:UI1:test-checks.c:796
] F:1:0:UI1:test-checks.c:797:3 <= 2
] E:step_assert_le_ushort:N:2:F:1:D:0.001000
] B:step_assert_le_uptr
] P:0:0:UI1:test-checks.c:2620
] F:1:0:UI1:test-checks.c:2621:3 <= 2
] E:step_assert_le_uptr:N:2:F:1:D:0.001000
] B:step_assert_le_ulong
] P:0:0:UI1:test-checks.c:1252
] F:1:0:UI1:test-checks.c:1253:3 <= 2
] E:step_assert_le_ulong:N:2:F:1:D:0.001000
] B:step_assert_le_ull
] P:0:0:UI1:test-checks.c:1480
] F:1:0:UI1:test-checks.c:1481:3 <= 2
] E:step_assert_le_ull:N:2:F:1:D:0.001000
] B:step_assert_le_uint
] P:0:0:UI1:test-checks.c:1024
] F:1:0:UI1:test-checks.c:1025:3 <= 2
] E:step_assert_le_uint:N:2:F:1:D:0.001000
] B:step_assert_le_uchar
] P:0:0:UI1:test-checks.c:568
] F:1:0:UI1:test-checks.c:569:3 <= 2
] E:step_assert_le_uchar:N:2:F:1:D:0.001000
] B:step_assert_le_u8
] P:0:0:UI1:test-checks.c:1708
] F:1:0:UI1:test-checks.c:1709:3 <= 2
] E:step_assert_le_u8:N:2:F:1:D:0.001000
] B:step_assert_le_u64
] P:0:0:UI1:test-checks.c:2392
] F:1:0:UI1:test-checks.c:2393:3 <= 2
] E:step_assert_le_u64:N:2:F:1:D:0.001000
] B:step_assert_le_u32
] P:0:0:UI1:test-checks.c:2164
] F:1:0:UI1:test-checks.c:2165:3 <= 2
] E:step_assert_le_u32:N:2:F:1:D:0.001000
] B:step_assert_le_u16
] P:0:0:UI1:test-checks.c:1936
] F:1:0:UI1:test-checks.c:1937:3 <= 2
] E:step_assert_le_u16:N:2:F:1:D:0.001000
] B:step_assert_le_sz
] P:0:0:UI1:test-checks.c:2848
] F:1:0:UI1:test-checks.c:2849:3 <= 2
] E:step_assert_le_sz:N:2:F:1:D:0.001000
] B:step_assert_le_ssz
] P:0:0:UI1:test-checks.c:2734
] F:1:0:UI1:test-checks.c:2735:3 <= 2
] E:step_assert_le_ssz:N:2:F:1:D:0.001000
] B:step_assert_le_short
] P:0:0:UI1:test-checks.c:682
] F:1:0:UI1:test-checks.c:683:3 <= 2
] E:step_assert_le_short:N:2:F:1:D:0.001000
] B:step_assert_le_schar
] P:0:0:UI1:test-checks.c:454
] F:1:0:UI1:test-checks.c:455:3 <= 2
] E:step_assert_le_schar:N:2:F:1:D:0.001000
] B:step_assert_le_long
] P:0:0:UI1:test-checks.c:1138
] F:1:0:UI1:test-checks.c:1139:3 <= 2
] E:step_assert_le_long:N:2:F:1:D:0.001000
] B:step_assert_le_ll
] P:0:0:UI1:test-checks.c:1366
] F:1:0:UI1:test-checks.c:1367:3 <= 2
] E:step_assert_le_ll:N:2:F:1:D:0.001000
] B:step_assert_le_iptr
] P:0:0:UI1:test-checks.c:2506
] F:1:0:UI1:test-checks.c:2507:3 <= 2
] E:step_assert_le_iptr:N:2:F:1:D:0.001000
] B:step_assert_le_int
] P:0:0:UI1:test-checks.c:910
] F:1:0:UI1:test-checks.c:911:3 <= 2
] E:step_assert_le_int:N:2:F:1:D:0.001000
] B:step_assert_le_i8
] P:0:0:UI1:test-checks.c:1594
] F:1:0:UI1:test-checks.c:1595:3 <= 2
] E:step_assert_le_i8:N:2:F:1:D:0.001000
] B:step_assert_le_i64
] P:0:0:UI1:test-checks.c:2278
] F:1:0:UI1:test-checks.c:2279:3 <= 2
] E:step_assert_le_i64:N:2:F:1:D:0.001000
] B:step_assert_le_i32
] P:0:0:UI1:test-checks.c:2050
] F:1:0:UI1:test-checks.c:2051:3 <= 2
] E:step_assert_le_i32:N:2:F:1:D:0.001000
] B:step_assert_le_i16
] P:0:0:UI1:test-checks.c:1822
] F:1:0:UI1:test-checks.c:1823:3 <= 2
] E:step_assert_le_i16:N:2:F:1:D:0.001000
] B:step_assert_gt_ushort
] P:0:0:UI1:test-checks.c:777
] F:1:0:UI1:test-checks.c:778:3 > 3
] E:step_assert_gt_ushort:N:2:F:1:D:0.001000
] B:step_assert_gt_uptr
] P:0:0:UI1:test-checks.c:2601
] F:1:0:UI1:test-checks.c:2602:3 > 3
] E:step_assert_gt_uptr:N:2:F:1:D:0.001000
] B:step_assert_gt_ulong
] P:0:0:UI1:test-checks.c:1233
] F:1:0:UI1:test-checks.c:1234:3 > 3
] E:step_assert_gt_ulong:N:2:F:1:D:0.001000
] B:step_assert_gt_ull
] P:0:0:UI1:test-checks.c:1461
] F:1:0:UI1:test-checks.c:1462:3 > 3
] E:step_assert_gt_ull:N:2:F:1:D:0.001000
] B:step_assert_gt_uint
] P:0:0:UI1:test-checks.c:1005
] F:1:0:UI1:test-checks.c:1006:3 > 3
] E:step_assert_gt_uint:N:2:F:1:D:0.001000
] B:step_assert_gt_uchar
] P:0:0:UI1:test-checks.c:549
] F:1:0:UI1:test-checks.c:550:3 > 3
] E:step_assert_gt_uchar:N:2:F:1:D:0.001000
] B:step_assert_gt_u8
] P:0:0:UI1:test-checks.c:1689
] F:1:0:UI1:test-checks.c:1690:3 > 3
] E:step_assert_gt_u8:N:2:F:1:D:0.001000
] B:step_assert_gt_u64
] P:0:0:UI1:test-checks.c:2373
] F:1:0:UI1:test-checks.c:2374:3 > 3
] E:step_assert_gt_u64:N:2:F:1:D:0.001000
] B:step_assert_gt_u32
] P:0:0:UI1:test-checks.c:2145
] F:1:0:UI1:test-checks.c:2146:3 > 3
] E:step_assert_gt_u32:N:2:F:1:D:0.001000
] B:step_assert_gt_u16
] P:0:0:UI1:test-checks.c:1917
] F:1:0:UI1:test-checks.c:1918:3 > 3
] E:step_assert_gt_u16:N:2:F:1:D:0.001000
] B:step_assert_gt_sz
] P:0:0:UI1:test-checks.c:2829
] F:1:0:UI1:test-checks.c:2830:3 > 3
] E:step_assert_gt_sz:N:2:F:1:D:0.001000
] B:step_assert_gt_ssz
] P:0:0:UI1:test-checks.c:2715
] F:1:0:UI1:test-checks.c:2716:3 > 3
] E:step_assert_gt_ssz:N:2:F:1:D:0.001000
] B:step_assert_gt_short
] P:0:0:UI1:test-checks.c:663
] F:1:0:UI1:test-checks.c:664:3 > 3
] E:step_assert_gt_short:N:2:F:1:D:0.001000
] B:step_assert_gt_schar
] P:0:0:UI1:test-checks.c:435
] F:1:0:UI1:test-checks.c:436:3 > 3
] E:step_assert_gt_schar:N:2:F:1:D:0.001000
] B:step_assert_gt_long
] P:0:0:UI1:test-checks.c:1119
] F:1:0:UI1:test-checks.c:1120:3 > 3
] E:step_assert_gt_long:N:2:F:1:D:0.001000
] B:step_assert_gt_ll
] P:0:0:UI1:test-checks.c:1347
] F:1:0:UI1:test-checks.c:1348:3 > 3
] E:step_assert_gt_ll:N:2:F:1:D:0.001000
] B:step_assert_gt_iptr
] P:0:0:UI1:test-checks.c:2487
] F:1:0:UI1:test-checks.c:2488:3 > 3
] E:step_assert_gt_iptr:N:2:F:1:D:0.001000
] B:step_assert_gt_int
] P:0:0:UI1:test-checks.c:891
] F:1:0:UI1:test-checks.c:892:3 > 3
] E:step_assert_gt_int:N:2:F:1:D:0.001000
] B:step_assert_gt_i8
] P:0:0:UI1:test-checks.c:1575
] F:1:0:UI1:test-checks.c:1576:3 > 3
] E:step_assert_gt_i8:N:2:F:1:D:0.001000
] B:step_assert_gt_i64
] P:0:0:UI1:test-checks.c:2259
] F:1:0:UI1:test-checks.c:2260:3 > 3
] E:step_assert_gt_i64:N:2:F:1:D:0.001000
] B:step_assert_gt_i32
] P:0:0:UI1:test-checks.c:2031
] F:1:0:UI1:test-checks.c:2032:3 > 3
] E:step_assert_gt_i32:N:2:F:1:D:0.001000
] B:step_assert_gt_i16
] P:0:0:UI1:test-checks.c:1803
] F:1:0:UI1:test-checks.c:1804:3 > 3
] E:step_assert_gt_i16:N:2:F:1:D:0.001000
] B:step_assert_ge_ushort
] P:0:0:UI1:test-checks.c:758
] F:1:0:UI1:test-checks.c:759:2 >= 3
] E:step_assert_ge_ushort:N:2:F:1:D:0.001000
] B:step_assert_ge_uptr
] P:0:0:UI1:test-checks.c:2582
] F:1:0:UI1:test-checks.c:2583:2 >= 3
] E:step_assert_ge_uptr:N:2:F:1:D:0.001000
] B:step_assert_ge_ulong
] P:0:0:UI1:test-checks.c:1214
] F:1:0:UI1:test-checks.c:1215:2 >= 3
] E:step_assert_ge_ulong:N:2:F:1:D:0.001000
] B:step_assert_ge_ull
] P:0:0:UI1:test-checks.c:1442
] F:1:0:UI1:test-checks.c:1443:2 >= 3
] E:step_assert_ge_ull:N:2:F:1:D:0.001000
] B:step_assert_ge_uint
] P:0:0:UI1:test-checks.c:986
] F:1:0:UI1:test-checks.c:987:2 >= 3
] E:step_assert_ge_uint:N:2:F:1:D:0.001000
] B:step_assert_ge_uchar
] P:0:0:UI1:test-checks.c:530
] F:1:0:UI1:test-checks.c:531:2 >= 3
] E:step_assert_ge_uchar:N:2:F:1:D:0.001000
] B:step_assert_ge_u8
] P:0:0:UI1:test-checks.c:1670
] F:1:0:UI1:test-checks.c:1671:2 >= 3
] E:step_assert_ge_u8:N:2:F:1:D:0.001000
] B:step_assert_ge_u64
] P:0:0:UI1:test-checks.c:2354
] F:1:0:UI1:test-checks.c:2355:2 >= 3
] E:step_assert_ge_u64:N:2:F:1:D:0.001000
] B:step_assert_ge_u32
] P:0:0:UI1:test-checks.c:2126
] F:1:0:UI1:test-checks.c:2127:2 >= 3
] E:step_assert_ge_u32:N:2:F:1:D:0.001000
] B:step_assert_ge_u16
] P:0:0:UI1:test-checks.c:1898
] F:1:0:UI1:test-checks.c:1899:2 >= 3
] E:step_assert_ge_u16:N:2:F:1:D:0.001000
] B:step_assert_ge_sz
] P:0:0:UI1:test-checks.c:2810
] F:1:0:UI1:test-checks.c:2811:2 >= 3
] E:step_assert_ge_sz:N:2:F:1:D:0.001000
] B:step_assert_ge_ssz
] P:0:0:UI1:test-checks.c:2696
] F:1:0:UI1:test-checks.c:2697:2 >= 3
] E:step_assert_ge_ssz:N:2:F:1:D:0.001000
] B:step_assert_ge_short
] P:0:0:UI1:test-checks.c:644
] F:1:0:UI1:test-checks.c:645:2 >= 3
] E:step_assert_ge_short:N:2:F:1:D:0.001000
] B:step_assert_ge_schar
] P:0:0:UI1:test-checks.c:416
] F:1:0:UI1:test-checks.c:417:2 >= 3
] E:step_assert_ge_schar:N:2:F:1:D:0.001000
] B:step_assert_ge_long
] P:0:0:UI1:test-checks.c:1100
] F:1:0:UI1:test-checks.c:1101:2 >= 3
] E:step_assert_ge_long:N:2:F:1:D:0.001000
] B:step_assert_ge_ll
] P:0:0:UI1:test-checks.c:1328
] F:1:0:UI1:test-checks.c:1329:2 >= 3
] E:step_assert_ge_ll:N:2:F:1:D:0.001000
] B:step_assert_ge_iptr
] P:0:0:UI1:test-checks.c:2468
] F:1:0:UI1:test-checks.c:2469:2 >= 3
] E:step_assert_ge_iptr:N:2:F:1:D:0.001000
] B:step_assert_ge_int
] P:0:0:UI1:test-checks.c:872
] F:1:0:UI1:test-checks.c:873:2 >= 3
] E:step_assert_ge_int:N:2:F:1:D:0.001000
] B:step_assert_ge_i8
] P:0:0:UI1:test-checks.c:1556
] F:1:0:UI1:test-checks.c:1557:2 >= 3
] E:step_assert_ge_i8:N:2:F:1:D:0.001000
] B:step_assert_ge_i64
] P:0:0:UI1:test-checks.c:2240
] F:1:0:UI1:test-checks.c:2241:2 >= 3
] E:step_assert_ge_i64:N:2:F:1:D:0.001000
] B:step_assert_ge_i32
] P:0:0:UI1:test-checks.c:2012
] F:1:0:UI1:test-checks.c:2013:2 >= 3
] E:step_assert_ge_i32:N:2:F:1:D:0.001000
] B:step_assert_ge_i16
] P:0:0:UI1:test-checks.c:1784
] F:1:0:UI1:test-checks.c:1785:2 >= 3
] E:step_assert_ge_i16:N:2:F:1:D:0.001000
] B:step_assert_false
] P:0:0:UI1:test-checks.c:27
] F:1:0:UI1:test-checks.c:28:a
] E:step_assert_false:N:2:F:1:D:0.001000
] B:step_assert_eq_ushort
] P:0:0:UI1:test-checks.c:720
] F:1:0:UI1:test-checks.c:721:2 == 3
] E:step_assert_eq_ushort:N:2:F:1:D:0.001000
] B:step_assert_eq_uptr
] P:0:0:UI1:test-checks.c:2544
] F:1:0:UI1:test-checks.c:2545:2 == 3
] E:step_assert_eq_uptr:N:2:F:1:D:0.001000
] B:step_assert_eq_ulong
] P:0:0:UI1:test-checks.c:1176
] F:1:0:UI1:test-checks.c:1177:2 == 3
] E:step_assert_eq_ulong:N:2:F:1:D:0.001000
] B:step_assert_eq_ull
] P:0:0:UI1:test-checks.c:1404
] F:1:0:UI1:test-checks.c:1405:2 == 3
] E:step_assert_eq_ull:N:2:F:1:D:0.001000
] B:step_assert_eq_uint
] P:0:0:UI1:test-checks.c:948
] F:1:0:UI1:test-checks.c:949:2 == 3
] E:step_assert_eq_uint:N:2:F:1:D:0.001000
] B:step_assert_eq_uchar
] P:0:0:UI1:test-checks.c:492
] F:1:0:UI1:test-checks.c:493:2 == 3
] E:step_assert_eq_uchar:N:2:F:1:D:0.001000
] B:step_assert_eq_u8
] P:0:0:UI1:test-checks.c:1632
] F:1:0:UI1:test-checks.c:1633:2 == 3
] E:step_assert_eq_u8:N:2:F:1:D:0.001000
] B:step_assert_eq_u64
] P:0:0:UI1:test-checks.c:2316
] F:1:0:UI1:test-checks.c:2317:2 == 3
] E:step_assert_eq_u64:N:2:F:1:D:0.001000
] B:step_assert_eq_u32
] P:0:0:UI1:test-checks.c:2088
] F:1:0:UI1:test-checks.c:2089:2 == 3
] E:step_assert_eq_u32:N:2:F:1:D:0.001000
] B:step_assert_eq_u16
] P:0:0:UI1:test-checks.c:1860
] F:1:0:UI1:test-checks.c:1861:2 == 3
] E:step_assert_eq_u16:N:2:F:1:D:0.001000
] B:step_assert_eq_sz
] P:0:0:UI1:test-checks.c:2772
] F:1:0:UI1:test-checks.c:2773:2 == 3
] E:step_assert_eq_sz:N:2:F:1:D:0.001000
] B:step_assert_eq_str
] P:0:0:UI1:test-checks.c:233
] F:1:0:UI1:test-checks.c:234:"a" == "b"
] E:step_assert_eq_str:N:2:F:1:D:0.001000
] B:step_assert_eq_ssz
] P:0:0:UI1:test-checks.c:2658
] F:1:0:UI1:test-checks.c:2659:2 == 3
] E:step_assert_eq_ssz:N:2:F:1:D:0.001000
] B:step_assert_eq_short
] P:0:0:UI1:test-checks.c:606
] F:1:0:UI1:test-checks.c:607:2 == 3
] E:step_assert_eq_short:N:2:F:1:D:0.001000
] B:step_assert_eq_schar
] P:0:0:UI1:test-checks.c:378
] F:1:0:UI1:test-checks.c:379:2 == 3
] E:step_assert_eq_schar:N:2:F:1:D:0.001000
] B:step_assert_eq_ptr
] P:0:0:UI1:test-checks.c:87
] F:1:0:UI1:test-checks.c:88:&a == &b
] E:step_assert_eq_ptr:N:2:F:1:D:0.001000
] B:step_assert_eq_nstr
] P:0:0:UI1:test-checks.c:283
] P:1:0:UI1:test-checks.c:284
] F:2:0:UI1:test-checks.c:285:"aaa" == "aaab"
] E:step_assert_eq_nstr:N:3:F:1:D:0.001000
] B:step_assert_eq_mem
] P:0:0:UI1:test-checks.c:183
] F:1:0:UI1:test-checks.c:184:memcmp(&a, &b, sizeof(a)) == 0
] E:step_assert_eq_mem:N:2:F:1:D:0.001000
] B:step_assert_eq_long
] P:0:0:UI1:test-checks.c:1062
] F:1:0:UI1:test-checks.c:1063:2 == 3
] E:step_assert_eq_long:N:2:F:1:D:0.001000
] B:step_assert_eq_ll
] P:0:0:UI1:test-checks.c:1290
] F:1:0:UI1:test-checks.c:1291:2 == 3
] E:step_assert_eq_ll:N:2:F:1:D:0.001000
] B:step_assert_eq_iptr
] P:0:0:UI1:test-checks.c:2430
] F:1:0:UI1:test-checks.c:2431:2 == 3
] E:step_assert_eq_iptr:N:2:F:1:D:0.001000
] B:step_assert_eq_int
] P:0:0:UI1:test-checks.c:834
] F:1:0:UI1:test-checks.c:835:2 == 3
] E:step_assert_eq_int:N:2:F:1:D:0.001000
] B:step_assert_eq_i8
] P:0:0:UI1:test-checks.c:1518
] F:1:0:UI1:test-checks.c:1519:2 == 3
] E:step_assert_eq_i8:N:2:F:1:D:0.001000
] B:step_assert_eq_i64
] P:0:0:UI1:test-checks.c:2202
] F:1:0:UI1:test-checks.c:2203:2 == 3
] E:step_assert_eq_i64:N:2:F:1:D:0.001000
] B:step_assert_eq_i32
] P:0:0:UI1:test-checks.c:1974
] F:1:0:UI1:test-checks.c:1975:2 == 3
] E:step_assert_eq_i32:N:2:F:1:D:0.001000
] B:step_assert_eq_i16
] P:0:0:UI1:test-checks.c:1746
] F:1:0:UI1:test-checks.c:1747:2 == 3
] E:step_assert_eq_i16:N:2:F:1:D:0.001000
] B:step_assert_eq_char
] P:0:0:UI1:test-checks.c:340
] F:1:0:UI1:test-checks.c:341:'2' == '3'
] E:step_assert_eq_char:N:2:F:1:D:0.001000
] B:step_assert_eq
] P:0:0:UI1:test-checks.c:46
] F:1:0:UI1:test-checks.c:47:1 == 2
] E:step_assert_eq:N:2:F:1:D:0.001000
] B:step
] P:0:0:UI1:test-step.c:5
] F:1:0:UI1:test-step.c:6:planned step (2)
] E:step:N:2:F:1:D:0.001000
] B:stat
] P:0:0:UI1:test-psx.c:13
] E:stat:N:1:F:0:D:0.001000
] B:rsc_success
] P:0:0:UI1:test-rtems.c:65
] F:1:0:UI1:test-rtems.c:66:RTEMS_INVALID_NUMBER == RTEMS_SUCCESSFUL
] F:*:0:UI1:test-rtems.c:68:RTEMS_INVALID_NUMBER == RTEMS_SUCCESSFUL
] P:2:0:UI1:test-rtems.c:69
] F:3:0:UI1:test-rtems.c:70:RTEMS_INVALID_NUMBER == RTEMS_SUCCESSFUL
] E:rsc_success:N:4:F:3:D:0.001000
] B:rsc
] P:0:0:UI1:test-rtems.c:54
] F:1:0:UI1:test-rtems.c:55:RTEMS_INVALID_NUMBER == RTEMS_INVALID_ID
] F:*:0:UI1:test-rtems.c:57:RTEMS_INVALID_NUMBER == RTEMS_INVALID_ID
] P:2:0:UI1:test-rtems.c:58
] F:3:0:UI1:test-rtems.c:59:RTEMS_INVALID_NUMBER == RTEMS_INVALID_ID
] E:rsc:N:4:F:3:D:0.001000
] B:plan_ok
] P:0:0:UI1:test-plan.c:13
] E:plan_ok:N:1:F:0:D:0.001000
] B:plan_failed
] P:0:0:UI1:test-plan.c:19
] F:*:0:UI1:*:*:actual steps (1), planned steps (2)
] E:plan_failed:N:1:F:1:D:0.001000
] B:now
] L:0.001000000
] E:now:N:0:F:0:D:0.003000
] B:nested_plan
] P:0:0:UI1:test-plan.c:42
] P:1.0:0:UI1:test-plan.c:44
] P:1.1:0:UI1:test-plan.c:45
] P:1:0:UI1:test-plan.c:47
] E:nested_plan:N:4:F:0:D:0.001000
] B:missing_timer_delete
] P:0:0:UI1:test-leak.c:119
] F:*:0:UI1:*:*:RTEMS timer leak (1)
] E:missing_timer_delete:N:1:F:1:D:0.001000
] B:missing_task_delete
] P:0:0:UI1:test-leak.c:110
] F:*:0:UI1:*:*:RTEMS task leak (1)
] E:missing_task_delete:N:1:F:1:D:0.001000
] B:missing_sema_delete
] P:0:0:UI1:test-leak.c:14
] F:*:0:UI1:*:*:RTEMS semaphore leak (1)
] E:missing_sema_delete:N:1:F:1:D:0.001000
] B:missing_region_delete
] P:0:0:UI1:test-leak.c:99
] F:*:0:UI1:*:*:RTEMS region leak (1)
] E:missing_region_delete:N:1:F:1:D:0.001000
] B:missing_period_delete
] P:0:0:UI1:test-leak.c:88
] F:*:0:UI1:*:*:RTEMS period leak (1)
] E:missing_period_delete:N:1:F:1:D:0.001000
] B:missing_part_delete
] P:0:0:UI1:test-leak.c:78
] F:*:0:UI1:*:*:RTEMS partition leak (1)
] E:missing_part_delete:N:1:F:1:D:0.001000
] B:missing_mq_delete
] P:0:0:UI1:test-leak.c:67
] F:*:0:UI1:*:*:RTEMS message queue leak (1)
] E:missing_mq_delete:N:1:F:1:D:0.001000
] B:missing_key_delete
] P:0:0:UI1:test-leak.c:128
] P:1:0:UI1:test-leak.c:131
] F:*:0:UI1:*:*:POSIX key leak (1)
] F:*:0:UI1:*:*:POSIX key value pair leak (1)
] E:missing_key_delete:N:2:F:2:D:0.001000
] B:missing_free
] P:0:0:UI1:test-leak.c:22
] E:missing_free:N:1:F:0:D:0.001000
] B:missing_extension_delete
] P:0:0:UI1:test-leak.c:57
] F:*:0:UI1:*:*:RTEMS extension leak (1)
] E:missing_extension_delete:N:1:F:1:D:0.001000
] B:missing_close
] P:0:0:UI1:test-leak.c:35
] F:*:0:UI1:*:*:file descriptor leak (FAILED:80:*ctx->c == c
=> test end: TTEST 1
] [ RTEMS shutdown ]
[202/676] p:160 f:4 u:3 e:22 I:0 B:3 t:1 L:0 i:1 W:0 | powerpc/psim: ttest02.exe
<<skipping passes>>
[217/676] p:173 f:4 u:4 e:22 I:0 B:3 t:2 L:0 i:1 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:08.820375 psx12.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
=> test end: PSX 12
] [ RTEMS shutdown ]
[218/676] p:174 f:4 u:4 e:22 I:0 B:3 t:2 L:0 i:1 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[246/676] p:200 f:6 u:4 e:22 I:0 B:3 t:2 L:0 i:1 W:0 | powerpc/psim: psxdevctl01.exe
Result: timeout
Time: 0:03:09.290415 psxdevctl01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxdevctl01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxdevctl01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxdevctl01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxdevctl01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxdevctl01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXDEVCTL 1
] *** BEGIN OF TEST PSXDEVCTL 1 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] posix_devctl() SOCKCLOSE on invalid file descriptor -- EBADF
] posix_devctl() SOCKCLOSE on valid file descriptor -- OK
] posix_devctl() FIONBIO with invalid nbyte -- EINVAL
] posix_devctl() FIONBIO with invalid file descriptor -- EBADF
] @"e&"Quit\n"
=> No stack.
=> test end: PSXDEVCTL 1
] *** TIMEOUT TIMEOUT
[247/676] p:201 f:6 u:4 e:22 I:0 B:3 t:2 L:0 i:1 W:0 | powerpc/psim: psxeintr_join.exe
<<skipping passes>>
[274/676] p:227 f:6 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:12.829379 psxkey08.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
=> test end: PSXKEY 8
] [ RTEMS shutdown ]
[275/676] p:228 f:6 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxkey09.exe
<<skipping passes>>
[282/676] p:234 f:7 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxmsgq04.exe
Result: timeout
Time: 0:03:05.962463 psxmsgq04.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxmsgq04.exe
=> test end: None
] *** TIMEOUT TIMEOUT
[283/676] p:235 f:7 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxmutexattr01.exe
[284/676] p:236 f:7 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxndbm01.exe
Result: timeout
Time: 0:03:14.833736 psxndbm01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxndbm01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXNDBM 01
] *** BEGIN OF TEST PSXNDBM 01 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] Open Database.
] Store Records in Database.
] Fetch Records from Database and check.
] Close Database.
] Testcases for 'dbm_open()'.
] Use 'O_CREAT | O_EXCL' to open existing file and confirm error.
] Use path name larger than '{PATH_MAX}-3 bytes.' and confirm error.
] Open file with write access only and confirm error.
] Testcases for 'dbm_store()'
] Insert new record with same key using 'DBM_INSERT' mode and confirm error.
] Insert new record with same key using 'DBM_REPLACE' mode and confirm changes.
] Store a new record and confirm that total number of records is successful 2.
] Testcases for 'dbm_fetch()'
] Fetch existing records and confirm results.
] Fetch non-existing record and confirm error.
] Testcases for 'dbm_delete()'
] Delete non-existing record and confirm error.
] Delete existing record and confirm that total number of records is successful 1.
] Confirm if correct record is deleted.
] Check if the data is not corrupted after usage of 'dbm_delete()'.
] Empty records in database and check results of 'dbm_firstkey()'.
] @"T&"Quit\n"
=> test end: PSXNDBM 01
] *** TIMEOUT TIMEOUT
[285/676] p:237 f:7 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxobj01.exe
<<skipping passes>>
[287/676] p:239 f:7 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxpasswd01.exe
Result: timeout
Time: 0:03:09.791466 psxpasswd01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxpasswd01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXPASSWD 1
] *** BEGIN OF TEST PSXPASSWD 1 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] Init - getpwent() -- OK, result should be NULL
] Init - getgrent() -- OK, result should be NULL
] Init - setpwent() -- OK
] Init - setgrent() -- OK
] Init - getpwent() (1) -- OK
] username: root
] user password:
] user ID: 0
=> test end: PSXPASSWD 1
] *** TIMEOUT TIMEOUT
[288/676] p:240 f:7 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxpasswd02.exe
<<skipping passes>>
[291/676] p:243 f:7 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxreaddir.exe
Result: failed
Time: 0:00:27.865268 psxreaddir.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxreaddir.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXREADDIR
] *** BEGIN OF TEST PSXREADDIR ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] chdir to the root directory
] chdir() status : 0
] Creating a series of directories under /
] Creating directory: a 0 0 Success
] Creating directory: b 0 0 Success
] Creating directory: c 0 0 Success
] Creating directory: d 0 0 Success
] Creating directory: e 0 0 Success
] Creating directory: f 0 0 Success
] Creating directory: c/y 0 0 Success
] Creating directory: c/z 0 0 Success
] Creating directory: c/x 0 0 Success
] Creating directory: c/y/a3333 0 0 Success
] Creating directory: c/y/j123 0 0 Success
] Create a lot of files
] Create a
] Create b
] Create c
] Create d
] Create e
] Create f
] Create g
] Create h
] Create i
] Create j
] Create k
] Create l
] Create m
] Create n
] Create o
] Create p
] Create q
] Create r
] Create s
] Create t
] Create u
] Create v
] Create w
] Create x
] Create y
] Create z
] Create aa
] Create ab
] Create ac
] Create ad
] Create ae
] Create af
] Create ag
] Create ah
] Create ai
] Create aj
] Create ak
] Create al
] Create am
] Create an
] Create ao
] Create ap
] Create aq
] Create ar
] Open /many and print the directory
] name inode offset reclen type
] a 248208 0 280 0x0118
] b 248336 280 280 0x0118
] c 248464 560 280 0x0118
] d 248592 840 280 0x0118
] e 248720 1120 280 0x0118
] f 248848 1400 280 0x0118
] g 248976 1680 280 0x0118
] h 249104 1960 280 0x0118
] i 249232 2240 280 0x0118
] j 249360 2520 280 0x0118
] k 249488 2800 280 0x0118
] l 249616 3080 280 0x0118
] m 249744 3360 280 0x0118
] n 249872 3640 280 0x0118
] o 250000 3920 280 0x0118
] p 250128 4200 280 0x0118
] q 250256 4480 280 0x0118
] r 250384 4760 280 0x0118
] s 250512 5040 280 0x0118
] t 250640 5320 280 0x0118
] u 250768 5600 280 0x0118
] v 250896 5880 280 0x0118
] w 251024 6160 280 0x0118
] x 251152 6440 280 0x0118
] y 251280 6720 280 0x0118
] z 251408 7000 280 0x0118
] "5"
] aa 251536 7280 280 0x01186 11480 280 0x0118
] aq 253584 11760 280 0x0118
] ar 253712 12040 280 0x0118
] open /b/my_file
] scandir a file status: -1
] Open /b/new_file
] fcntl F_SETFD should return 0
] fcntl F_SETFD should return 1
] fcntl F_DUPFD should return a file descriptor
] close duplicate should return 0
] fcntl F_GETFL returns current flags
] fcntl F_GETFL returned 0x0
] fcntl F_SETFL to add O_APPEND and O_NONBLOCK
] fcntl F_GETFL return current flags to see changes
] fcntl F_GETFL returned 0x4008
] fcntl F_GETLK should return -1
] fcntl F_SETLK should return -1
] fcntl F_SETLKW should return -1
] fcntl F_SETOWN should return -1
] fcntl F_GETOWN should return -1
] fcntl invalid argument should return -1
] Status -1
] close should return 0
] opendir, readdir and closedir /b/my_file
] opendir, readdir and closedir
] chdir to /b/my_file
] Performing stat of directory /
] status for stat : 0, size of directory: 2240
] Open and print directory /
] name inode offset reclen type
] dev 246496 0 280 0x0118
] a 246688 280 280 0x0118
] b 246808 560 280 0x0118
] c 246928 840 280 0x0118
] d 247048 1120 280 0x0118
] e 247168 1400 280 0x0118
] f 247288 1680 280 0x0118
] many 248016 1960 280 0x0118
] mkdir /d/my_dir
] Open /d/my_dir
] remove /d/my_dir.
] close /d/my_dir.
] Opening directory /c
] @"
] name inode offs18
] f 247288 1680 280 0x0118
] many 248016 1960 280 0x0118
] Rewinding directory
] name inode offset reclen type
] dev 246496 0 280 0x0118
] a 246688 280 280 0x0118
] b 246808 560 280 0x0118
] c 246928 840 280 0x0118
] d 247048 1120 280 0x0118
] e 247168 1400 280 0x0118
] f 247288 1680 280 0x0118
] many 248016 1960 280 0x0118
] Seek directory
] telldir() should report only sizeof(struct dirent) increments
] in position. Sizeof(struct dirent): 280
] seeked to 0 -- currently at 1
] seeked to 70 -- currently at 2
] seeked to 140 -- currently at 3
] Send seekdir a NULL pointer
] Closing directory
] SCANDIR TEST
] selection rule 1
] scanning for any entry under directory /c
] SCANDIR SELECT1 accepts nodename: y
] SCANDIR SELECT1 accepts nodename: z
] SCANDIR SELECT1 accepts nodename: x
] scandir status: 3
] Selected Node Name: y
] Selected Node Name: z
] Selected Node Name: x
] selection rule 2
] scanning for any entry under directory /c whose name = y
] SCANDIR SELECT accepted nodename: y
] SCANDIR SELECT rejected nodename: z
] SCANDIR SELECT rejected nodename: x
] scandir status: 1
] Selected Node Name: y
] SCANDIR with sorting
] selection rule 1
] scanning for any entry under directory /c
] sort in ascending order
] SCANDIR SELECT1 accepts nodename: y
] SCANDIR SELECT1 accepts nodename: z
] SCANDIR SELECT1 accepts nodename: x
] scandir status: 3
] Selected and Sorted Node Name: x
] Selected and Sorted Node Name: y
] Selected and Sorted Node Name: z
] SCANDIR with sorting
] selection rule 1
] scanning for any entry under directory /c
] sort in descending order
] SCANDIR SELECT1 accepts nodename: y
] SCANDIR SELECT1 accepts nodename: z
] SCANDIR SELECT1 accepts nodename: x
] scandir status: 3
] Selected and Sorted Node Name: z
] Selected and Sorted Node Name: y
] Selected and Sorted Node Name: x
] unlink /b/my_file should return 0
] Validate readdir across mount point
] name inode offset reclen type
] should_be_hidden 262688 0 280 0x0118
] Attempting to mount IMFS file system at /imfs
] create /imfs/testdir and /imfs/testdir/testsubdir
] nameexecuting thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[292/676] p:244 f:7 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxrwlock01.exe
<<skipping passes>>
[301/676] p:252 f:8 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxsignal06.exe
Result: timeout
Time: 0:03:09.315556 psxsignal06.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxsignal06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxsignal06.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxsignal06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXSIGNAL 6
] *** BEGIN OF TEST PSXSIGNAL 6 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] Init: pthread_cond_init - OK
] Init: pthread_mutex_init - OK
] Init: pthread_create - OK
] Test: Unblock SIGUSR1
] Test: pthread_cond_wait - OK
] Init: pthread_kill - SIGUSR to Test Thread - OK
] Init: pthread_kill - SIGUSR to Test Thread - OK
=> test end: PSXSIGNAL 6
] *** TIMEOUT TIMEOUT
[302/676] p:253 f:8 u:4 e:22 I:0 B:3 t:3 L:0 i:1 W:0 | powerpc/psim: psxsignal07.exe
<<skipping passes>>
[408/676] p:352 f:9 u:6 e:22 I:0 B:3 t:7 L:0 i:1 W:0 | powerpc/psim: sp20.exe
Result: failed
Time: 0:00:05.960399 sp20.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp20.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp20.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp20.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp20.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp20.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 20
] *** BEGIN OF TEST SP 20 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] TA1 - rtems_rate_monotonic_create id = 0x42010001
] TA1 - rtems_rate_monotonic_ident id = 0x42010001
] TA1 - (0x42010001) period 2
] TA2 - rtems_rate_monotonic_create id = 0x42010002
] TA2 - rtems_rate_monotonic_ident id = 0x42010002
] TA2 - (0x42010002) period 2
] TA3 - rtems_rate_monotonic_create id = 0x42010003
] TA3 - rtems_rate_monotonic_ident id = 0x42010003
] TA3 - (0x42010003) period 2
] TA4 - rtems_rate_monotonic_create id = 0x42010004
] TA4 - rtems_rate_monotonic_ident id = 0x42010004
] TA4 - (0x42010004) period 2
] TA5 - rtems_rate_monotonic_create id = 0x42010005
] TA5 - rtems_rate_monotonic_ident id = 0x42010005
] TA5 - (0x42010005) period 100
] TA6 - rtems_rate_monotonic_create id = 0x42010006
] TA6 - rtems_rate_monotonic_ident id = 0x42010006
] TA6 - (0x42010006) period 0
] TA5 - PERIODS CHECK OK (1)
] TA5 - PERIODS CHECK OK (2)
] TA5 - PERIODS CHECK OK (3)
] TA5 - PERIODS CHECK OK (5)
] TA6 - Actual: 10 Expected: 10 - OK
] TA6 - Actual: 20 Expected: 20 - OK
] TA6 - Actual: 30 Expected: 30 - OK
] TA6 - Actual: 40 Expected: 40 - OK
] TA6 - Actual: 50 Expected: 50 - OK
] TA6 - Actual: 60 Expected: 60 - OK
] TA6 - Actual: 70 Expected: 70 - OK
] TA6 - Actual: 80 Expected: 80 - OK
] TA6 - Actual: 90 Expected: 90 - OK
] TA6 - Actual: 100 Expected: 100 - OK
] TA5 - PERIODS CHECK OK (6)
] TA5 - PERIODS CHECK OK (7)
] TA5 - PERIODS CHECK OK (8)
] TA5 - PERIODS CHECK OK (9)
] TA3a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] executing thread ID: 0x0a010007
] executing thread name: TA5
=> [Inferior 1 (process 42000) exited with code 05]
[409/676] p:353 f:9 u:6 e:22 I:0 B:3 t:7 L:0 i:1 W:0 | powerpc/psim: sp2038.exe
[410/676] p:354 f:9 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: sp21.exe
Result: timeout
Time: 0:03:10.322528 sp21.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp21.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp21.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp21.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 21
] *** BEGIN OF TEST SP 21 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] ----- TESTING THE NULL DRIVER CHECKS -----
] rtems_io_initialize - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_open - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_close - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_read - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_write - NULL DRIVER RTEMS_SUCCESSFUL
] rtems_io_control - NULL DRIVER RTEMS_SUCCESSFUL
] ----- TESTING THE I/O MANAGER DIRECTIVES -----
] rtems_io_initialize - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_open - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_close - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_read - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_write - STUB DRIVER RTEMS_SUCCESSFUL
] rtems_io_control - STUB DRIVER RTEMS_SUCCESSFUL
] ----- RETURNING INVALID MAJOR NUMBER -----
] rtems_io_initialize - RTEMS_INVALID_NUMBER
] rtems_io_open - RTEMS_INVALID_NUMBER
] ----- EXERCISE DRIVER REGISTER -----
] rtems_io_register_driver - RTEMS_INVALID_ADDRESS - NULL registered
] rtems_io_register_driver - RTEMS_INVALID_ADDRESS - NULL device
=> test end: SP 21
] *** TIMEOUT TIMEOUT
[411/676] p:354 f:9 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: sp22.exe
<<skipping passes>>
[438/676] p:380 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: sp51.exe
Result: timeout
Time: 0:03:10.044773 sp51.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp51.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp51.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp51.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp51.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp51.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 51
] *** BEGIN OF TEST SP 51 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] Create semaphore - priority ceiling unlocked - invalid ceiling
] Create semaphore - priority ceiling locked - violate ceiling
] Create semaphore - priority ceiling unlocked
] Obtain semaphore -- violate ceiling
] Release semaphore we did not obtain
=> test end: SP 51
] *** TIMEOUT TIMEOUT
[439/676] p:381 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: sp52.exe
<<skipping passes>>
[449/676] p:392 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: sp63.exe
Result: timeout
Time: 0:03:12.304952 sp63.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp63.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp63.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp63.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp63.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp63.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 63
] *** BEGIN OF TEST SP 63 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] Init - _Heap_Initialize (for test one) - OK
] Init - Heap size=984
] Init - _Heap_Allocate - too large size (overflow)- not OK
] Init - _Heap_Allocate_aligned - OK
] Init - _Heap_Resize_block - OK
] Init - _Heap_Initialize (for test two) - OK
=> test end: SP 63
] *** TIMEOUT TIMEOUT
[450/676] p:392 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: sp64.exe
<<skipping passes>>
[456/676] p:398 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: sp70.exe
Result: timeout
Time: 0:03:13.504611 sp70.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/sp70.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/sp70.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp70.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp70.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/sp70.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SP 70
] *** BEGIN OF TEST SP 70 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] Creating task 1 - OK
] Creating task 2 - OK
] Creating task 3 - OK
] Creating task 4 - OK
] Creating task 5 - OK
] Creating task 6 - OK
] Deleting task 2
] Deleting task 3
] Deleting task 4
] Deleting task 5
] Creating task 2 - OK
] Creating task 3 - OK
] @"(gdb)
=> test end: SP 70
] *** TIMEOUT TIMEOUT
[457/676] p:399 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: sp71.exe
<<skipping passes>>
[469/676] p:411 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: spcbssched03.exe
Result: timeout
Time: 0:03:16.150965 spcbssched03.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spcbssched03.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spcbssched03.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcbssched03.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcbssched03.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spcbssched03.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPCBSSCHED 3
] *** BEGIN OF TEST SPCBSSCHED 3 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] PT1 - rtems_rate_monotonic_create id = 0x42010001
] PT1 - rtems_rate_monotonic_ident id = 0x42010001
] PT1 - (0x42010001) period 30
] PT2 - rtems_rate_monotonic_create id = 0x42010002
] PT2 - rtems_rate_monotonic_ident id = 0x42010002
] PT2 - (0x42010002) period 40
] PT3 - rtems_rate_monotonic_create id = 0x42010003
] PT3 - rtems_rate_monotonic_ident id = 0x42010003
] PT3 - (0x42010003) period 50
] PT4 - rtems_rate_monotonic_create id = 0x42010004
] PT4 - rtems_rate_monotonic_ident id = 0x42010004
] PT4 - (0x42010004) period 70
] AT5 AT6 P1-S ticks:2
] P1-F ticks:12
] P2-S ticks:12
] P2-F ticks:22
] P3-S ticks:22
] P3-F ticks:32
] P1-S ticks:32
] P1-F ticks:42
] P4-S ticks:42
] P4-F ticks:52
] P2-S ticks:52
] P1-S ticks:62
] P1-F ticks:72
] P2-F ticks:72
] P3-S ticks:72
] P3-F ticks:82
] AT6-S ticks:82
] P6-F ticks:87
] Killing task 6
] AT5-S ticks:87
] P1-S ticks:92
] P1-F ticks:102
] P2-S ticks:102
] P2-F ticks:112
] P4-S ticks:112
] P1-S ticks:122
] P1-F ticks:132
] P2-S ticks:132
] P2-F ticks:142
] P3-S ticks:142
] P1-S ticks:152
] P1-F ticks:162
] P3-F ticks:162
] P4-F ticks:162
] P2-S ticks:172
] P1-S ticks:182
] P1-F ticks:192
] P2-F ticks:192
] P3-S ticks:192
] P3-F ticks:202
] P4-S ticks:202
] P1-S ticks:212
] P1-F ticks:222
] P2-S ticks:222
] P2-F ticks:232
] P3-S ticks:232
] P1-S ticks:242
] P1-F ticks:252
] P2-S ticks:252
] P2-F ticks:262
] P3-F ticks:262
] Signal overrun, fixing the task
] P1-S ticks:272
] P1-F ticks:282
] P3-S ticks:282
] P2-S ticks:292
] P1-S ticks:302
] P1-F ticks:312
] P2-F ticks:312
] P3-F ticks:312
] P3-S ticks:322
] P1-S ticks:332
] P1-F ticks:342
] P2-S ticks:342
] P2-F ticks:352
] P3-F ticks:352
] P1-S ticks:362
] P1-F ticks:372
] P2-S ticks:372
] P2-F ticks:382
] P1-S ticks:392
] P1-F ticks:402
] P2-S ticks:412
] P1-S ticks:422
] P1-F ticks:432
] P2-F ticks:432
] P3-S ticks:432
] P1-S ticks:452
] P1-F ticks:462
] P2-S ticks:462
] P2-F ticks:472
] P3-F ticks:472
] P1-S ticks:482
] P1-F ticks:492
] P2-S ticks:492
] P2-F ticks:502
] P1-S ticks:512
] P1-F ticks:522
] P3-S ticks:522
] P2-S ticks:532
] P1-S ticks:542
] P1-F ticks:552
] P2-F ticks:552
] P3-F ticks:552
] P1-S ticks:572
] P1-F ticks:582
] P2-S ticks:582
] P2-F ticks:592
] P1-S ticks:602
] P1-F ticks:612
] P2-S ticks:612
] P2-F ticks:622
] P3-S ticks:622
] P1-S ticks:632
] P1-F ticks:642
] P3-F ticks:642
] P2-S ticks:652
] P1-S ticks:662
] P1-F ticks:672
] P2-F ticks:672
] P1-S ticks:692
] P1-F ticks:702
] P2-S ticks:702
] P2-F ticks:712
] P1-S ticks:722
] P1-F ticks:732
] P2-S ticks:732
] P3-S ticks:732
] P2-F ticks:742
] P1-S ticks:752
] P1-F ticks:762
] P3-F ticks:762
] P2-S ticks:772
] P1-S ticks:782
] P1-F ticks:792
] P2-F ticks:792
] P1-S ticks:812
] P1-F ticks:822
] P2-S ticks:822
] P3-S ticks:822
] P2-F ticks:832
] P1-S ticks:842
=> test end: SPCBSSCHED 3
] *** TIMEOUT TIMEOUT
[470/676] p:412 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: spchain.exe
<<skipping passes>>
[474/676] p:416 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: spconfig01.exe
Result: failed
Time: 0:00:01.065231 spconfig01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spconfig01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spconfig01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spconfig01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spconfig01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/sptests/spconfig01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPCONFIG 1
] *** BEGIN OF TEST SPCONFIG 1 ***
] *** TEST VERSION:
=> [Inferior 1 (process 42000) exited with code 05]
[475/676] p:417 f:10 u:6 e:22 I:0 B:3 t:8 L:0 i:1 W:0 | powerpc/psim: spconfig02.exe
<<skipping passes>>
[633/676] p:568 f:12 u:6 e:22 I:0 B:3 t:13 L:0 i:1 W:0 | powerpc/psim: tm22.exe
Result: timeout
Time: 0:03:08.987249 tm22.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tm22.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tm22.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm22.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm22.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm22.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] THE TIMES REPORTED BY THIS TEST INCLUDE DEBUG CODE!
=> test start: TIME TEST 22
] *** BEGIN OF TEST TIME TEST 22 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] rtems_message_queue_broadcast: task readied returns to caller - 447
] rtems_message_queue_broadcast: no waiting tasks - 167
=> test end: TIME TEST 22
] *** TIMEOUT TIMEOUT
[634/676] p:570 f:12 u:6 e:22 I:0 B:3 t:13 L:0 i:1 W:0 | powerpc/psim: tm23.exe
<<skipping passes>>
[640/676] p:575 f:12 u:6 e:22 I:0 B:3 t:13 L:0 i:1 W:0 | powerpc/psim: tm29.exe
Result: timeout
Time: 0:03:10.068615 tm29.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tm29.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tm29.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm29.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm29.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tm29.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
] THE TIMES REPORTED BY THIS TEST INCLUDE DEBUG CODE!
=> test start: TIME TEST 29
] *** BEGIN OF TEST TIME TEST 29 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] rtems_rate_monotonic_create: only case - 543
] rtems_rate_monotonic_period: initiate period returns to caller - 345
] rtems_rate_monotonic_period: obtain status - 64
=> test end: TIME TEST 29
] *** TIMEOUT TIMEOUT
[641/676] p:576 f:12 u:6 e:22 I:0 B:3 t:13 L:0 i:1 W:0 | powerpc/psim: tm30.exe
<<skipping passes>>
[652/676] p:587 f:12 u:6 e:22 I:0 B:3 t:13 L:0 i:1 W:0 | powerpc/psim: tmtimer01.exe
Result: timeout
Time: 0:03:21.977505 tmtimer01.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/tmtests/tmtimer01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TMTIMER 1
] *** BEGIN OF TEST TMTIMER 1 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] *** BEGIN OF JSON DATA ***
] {
] "timer-count": 21888,
] "samples": [
] {
] "active-timers": 0,
] "first": 173,
] "middle": 173,
] "last": 173
] }, {
] "active-timers": 2,
] "first": 187,
] "middle": 229,
] "last": 180
] }, {
] "active-timers": 4,
] "first": 199,
] "middle": 193,
] "last": 226
] }, {
] "active-timers": 7,
] "first": 199,
] "middle": 205,
] "last": 256
] }, {
] "active-timers": 10,
] "first": 211,
] "middle": 205,
] "last": 251
] }, {
] "active-timers": 14,
] "first": 211,
] "middle": 218,
] "last": 264
] }, {
] "active-timers": 19,
] "first": 223,
] "middle": 217,
] "last": 283
] }, {
] "active-timers": 25,
] "first": 223,
] "middle": 230,
] "last": 312
] }, {
] "active-timers": 32,
] "first": 223,
] "middle": 230,
] "last": 290
] }, {
] "active-timers": 41,
] "first": 235,
] "middle": 230,
] "last": 325
] }, {
] "active-timers": 52,
] "first": 235,
] "middle": 243,
] "last": 302
] }, {
] "active-timers": 66,
] "first": 235,
] "middle": 242,
] "last": 315
] }, {
] "active-timers": 83,
] "first": 247,
] "middle": 242,
] "last": 334
] }, {
] "active-timers": 104,
] "first": 247,
] "middle": 255,
] "last": 328
] }, {
] "active-timers": 130,
] "first": 247,
] "middle": 254,
] "last": 341
] }, {
] "active-timers": 162,
] "first": 259,
] "middle": 254,
] "last": 341
] }, {
] "active-timers": 201,
] "first": 259,
] "middle": 267,
] "last": 389
] }, {
] "active-timers": 249,
] "first": 259,
] "middle": 268,
] "last": 389
] }, {
] "active-timers": 308,
] "first": 259,
] "middle": 280,
] "last": 366
] }, {
] "active-timers": 381,
] "first": 271,
] "middle": 269,
] "last": 458
] }, {
] "active-timers": 470,
] "first": 271,
] "middle": 280,
] "last": 379
] }, {
] "active-timers": 580,
] "first": 271,
] "middle": 292,
] "last": 392
] }, {
] "active-timers": 715,
] "first": 283,
] "middle": 280,
] @"1"@" "
] "last": 41319,
] "last": 456
] }, {
] "active-timers": 4644,
] "first": 307,
] "middle": 329,
] "last": 468
] }, {
] "active-timers": 5714,
] "first": 319,
] "middle": 317,
] "last": 468
] }, {
] "active-timers": 7030,
] "first": 319,
] "middle": 331,
] "last": 481
] }, {
] "active-timers": 8649,
] "first": 319,
] "middle": 329,
] "last": 529
] }, {
] "active-timers": 10640,
] "first": 331,
] "middle": 329,
] "last": 494
] }, {
] "active-timers": 13089,
] "first": 331,
] "middle": 341,
] "last": 542
] }, {
] "active-timers": 16101,
] "first": 331,
] "middle": 343,
] "last": 558
] }, {
] "active-timers": 19806,
=> test end: TMTIMER 1
] *** TIMEOUT TIMEOUT
[653/676] p:588 f:12 u:6 e:22 I:0 B:3 t:13 L:0 i:1 W:0 | powerpc/psim: ts-unit-no-clock-0.exe
<<skipping passes>>
[665/676] p:599 f:13 u:6 e:22 I:0 B:3 t:13 L:0 i:1 W:0 | powerpc/psim: ts-validation-acfg-1.exe
Result: timeout
Time: 0:03:12.397441 ts-validation-acfg-1.exe
=> gdb: /home/tester/rtems-cron-6/tools/6/bin/powerpc-rtems6-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-1.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-1.exe...
=> warning: File "/home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-1.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=> add-auto-load-safe-path
=> /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-1.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-6/tools/6/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-6/rtems/b-psim/powerpc/psim/testsuites/validation/ts-validation-acfg-1.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TestsuitesValidationAcfg1
] *** BEGIN OF TEST TestsuitesValidationAcfg1 ***
] *** TEST VERSION: 6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] A:TestsuitesValidationAcfg1
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB 2e6e83660f259d28327ac042b4960716781e24d0, Newlib 1b3dcfd)
] S:Version:6.0.0.333a1aee2bc00628bd4ac7a364797cb5e7ad92ba
] S:BSP:psim
=> test end: TestsuitesValidationAcfg1
] *** TIMEOUT TIMEOUT
[666/676] p:600 f:13 u:6 e:22 I:0 B:3 t:13 L:0 i:1 W:0 | powerpc/psim: ts-validation-cache.exe
<<skipping passes>>
[676/676] p:610 f:13 u:6 e:22 I:0 B:3 t:13 L:0 i:1 W:0 | powerpc/psim: ts-validation-tls-1.exe
Passed: 613
Failed: 13
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 17
Test too long: 0
Invalid: 1
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 676
Failures:
dl06.exe
fsimfsgeneric01.exe
psx12.exe
psxkey08.exe
psxreaddir.exe
sp20.exe
spconfig01.exe
termios05.exe
ttest01.exe
minimum.exe
regulator01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
complex.exe
mimfs_fserror.exe
monitor02.exe
psxdevctl01.exe
psxmsgq04.exe
psxndbm01.exe
psxpasswd01.exe
psxsignal06.exe
sp21.exe
sp51.exe
sp63.exe
sp70.exe
spcbssched03.exe
tm22.exe
tm29.exe
tmtimer01.exe
ts-validation-acfg-1.exe
Invalid:
tar03.exe
Average test time: 0:00:01.956596
Testing time : 0:22:02.659387
More information about the build
mailing list