[rtems-test] i386/pc686: RTEMS_POSIX_API: Passed:618 Failed:11 Timeout:2 Test-Too-long:0 Invalid:10 Wrong:0
Joel Sherrill
joel at rtems.org
Sun Dec 21 05:42:24 UTC 2025
Testing time : 0:13:51.915879
Average test time: 0:00:01.228827
Host
====
Linux-5.14.0-611.9.1.el9_7.x86_64-x86_64-with-glibc2.34 (Linux gitlab.oarcorp.com 5.14.0-611.9.1.el9_7.x86_64 #1 SMP PREEMPT_DYNAMIC Tue Nov 25 17:53:21 UTC 2025 x86_64 x86_64)
Configuration
=============
Version: 6.2.0.not-released
Build : RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
Summary
=======
Passed: 618
Failed: 11
User Input: 6
Expected Fail: 27
Indeterminate: 0
Benchmark: 3
Timeout: 2
Test too long: 0
Invalid: 10
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 677
Failures:
dl06.exe
psx09.exe
psx12.exe
sp69.exe
spfatal26.exe
spfatal30.exe
spinternalerror02.exe
sptimecounter02.exe
sptls01.exe
math.exe
tmcontext01.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
psxfenv01.exe
ts-performance-no-clock-0.exe
ts-validation-intr.exe
ts-validation-no-clock-0.exe
ts-validation-one-cpu-0.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
ts-unit-no-clock-0.exe
ts-validation-io-kernel.exe
Invalid:
sp54.exe
spfatal09.exe
spfatal12.exe
spfatal33.exe
spinternalerror01.exe
sptimecounter01.exe
ts-fatal-idle-thread-create-failed.exe
ts-fatal-idle-thread-stack-too-small.exe
ts-fatal-init-task-construct-failed.exe
ts-fatal-too-large-tls-size.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/joel/rtems-cron-6.2/tools/6/bin/rtems-test --jobs 24 --rtems-tools=/home/joel/rtems-cron-6.2/tools/6 --rtems-bsp=pc-qemu --log=run-pc-qemu.log --use-gitconfig --mail b-pc686
Host: Linux gitlab.oarcorp.com 5.14.0-611.9.1.el9_7.x86_64 #1 SMP PREEMPT_DYNAMIC Tue Nov 25 17:53:21 UTC 2025 x86_64
Python: 3.9.23 (main, Aug 19 2025, 00:00:00) [GCC 11.5.0 20240719 (Red Hat 11.5.0-11)]
Host: Linux-5.14.0-611.9.1.el9_7.x86_64-x86_64-with-glibc2.34 (Linux gitlab.oarcorp.com 5.14.0-611.9.1.el9_7.x86_64 #1 SMP PREEMPT_DYNAMIC Tue Nov 25 17:53:21 UTC 2025 x86_64 x86_64)
[ 1/677] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | i386/pc686: dhrystone.exe
<<skipping passes>>
[134/677] p:86 f:0 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | i386/pc686: dl06.exe
Result: failed
Time: 0:00:01.515095 dl06.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/libtests/dl06.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
]
] load: /dl06.rap
] dlopen failed: offset past end of file: offset=8791 size=8791
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[135/677] p:86 f:0 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | i386/pc686: dl07.exe
<<skipping passes>>
[216/677] p:162 f:2 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | i386/pc686: psx09.exe
Result: failed
Time: 0:00:05.513263 psx09.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/psxtests/psx09.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: PSX 9
] *** BEGIN OF TEST PSX 9 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_getschedparam - SUCCESSFUL
] Init: Fri May 24 11:05:00 1996 - current priority = 2
] Init: pthread_setschedparam - SUCCESSFUL (sporadic server)
] Init: Fri May 24 11:05:00 1996 - new priority = 253
] Init: Fri May 24 11:05:00 1996 - new priority = 253
] Init: Fri May 24 11:05:00 1996 - new priority = 252
] Init: Fri May 24 11:05:01 1996 - new priority = 253
] Init: Fri May 24 11:05:02 1996 - new priority = 252
]
] Init: pthread_setschedparam - SUCCESSFUL (sporadic server)
] Init: Initializing mutex attributes for priority ceiling
] Init: Creating a mutex
] Init: Fri May 24 11:05:02 1996 - new priority = 253
] Init: Go into low priority and lock/unlock ceiling mutex
] Init: Go into high priority and lock/unlock ceiling mutex
] Init: Go into low priority and change scheduler parameters
] Init: Go into low priority and set POSIX priority
] Init: Go into low priority and set RTEMS priority
] Init: Go into low priority and set scheduler
] ../../../testsuites/psxtests/psx09/init.c: 342 sc == RTEMS_SUCCESSFUL
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x0b010001
] executing thread name:
[217/677] p:162 f:2 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | i386/pc686: psx10.exe
<<skipping passes>>
[219/677] p:164 f:2 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | i386/pc686: psx12.exe
Result: failed
Time: 0:00:03.273636 psx12.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/psxtests/psx12.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 99ms
] [0] L 199ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x0b010001
] executing thread name:
[220/677] p:165 f:2 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | i386/pc686: psx13.exe
<<skipping passes>>
[442/677] p:382 f:4 u:6 e:23 I:0 B:3 t:0 L:0 i:0 W:0 | i386/pc686: sp54.exe
Result: invalid
Time: 0:00:02.015060 sp54.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/sp54.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
] Init - use valid id of API class with no objects
] Init - lookup name within API class with no objects
]
] *** END OF TEST SP 54 ***
]
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x09010001
] executing thread name: IDLE
[443/677] p:383 f:4 u:6 e:23 I:0 B:3 t:0 L:0 i:0 W:0 | i386/pc686: sp55.exe
<<skipping passes>>
[456/677] p:395 f:4 u:6 e:23 I:0 B:3 t:0 L:0 i:1 W:0 | i386/pc686: sp69.exe
Result: failed
Time: 0:00:02.267628 sp69.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/sp69.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: SP 69
] *** BEGIN OF TEST SP 69 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] rtems_rate_monotonic_get_status - verify values of an inactive period
] rtems_rate_monotonic_get_status - verify values of an active period
] wall time should be ~600000000 is 600117105
] cpu time should be ~100000000 is 99871301
] ../../../testsuites/sptests/sp69/init.c: 118 period_status.executed_since_last_period.tv_nsec >= 100000000
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[457/677] p:396 f:4 u:6 e:23 I:0 B:3 t:0 L:0 i:1 W:0 | i386/pc686: sp70.exe
<<skipping passes>>
[497/677] p:438 f:5 u:6 e:23 I:0 B:3 t:0 L:0 i:1 W:0 | i386/pc686: spfatal09.exe
Result: invalid
Time: 0:00:00.501838 spfatal09.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/spfatal09.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..
] Booting from ROM..
[498/677] p:438 f:5 u:6 e:23 I:0 B:3 t:0 L:0 i:1 W:0 | i386/pc686: spfatal10.exe
<<skipping passes>>
[500/677] p:438 f:5 u:6 e:23 I:0 B:3 t:0 L:0 i:1 W:0 | i386/pc686: spfatal12.exe
Result: invalid
Time: 0:00:00.502561 spfatal12.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/spfatal12.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..
] Booting from ROM..
[501/677] p:440 f:5 u:6 e:23 I:0 B:3 t:0 L:0 i:3 W:0 | i386/pc686: spfatal14.exe
<<skipping passes>>
[503/677] p:441 f:5 u:6 e:23 I:0 B:3 t:0 L:0 i:3 W:0 | i386/pc686: spfatal26.exe
Result: failed
Time: 0:00:01.505638 spfatal26.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/spfatal26.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: SPFATAL 26
] *** BEGIN OF TEST SPFATAL 26 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] ../../../testsuites/sptests/spfatal26/init.c: 43 0
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[504/677] p:441 f:5 u:6 e:23 I:0 B:3 t:0 L:0 i:3 W:0 | i386/pc686: spfatal28.exe
<<skipping passes>>
[506/677] p:442 f:5 u:6 e:23 I:0 B:3 t:0 L:0 i:3 W:0 | i386/pc686: spfatal30.exe
Result: failed
Time: 0:00:01.513506 spfatal30.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/spfatal30.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: SPFATAL 30
] *** BEGIN OF TEST SPFATAL 30 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] ../../../testsuites/sptests/spfatal30/init.c: 71 0
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[507/677] p:443 f:5 u:6 e:23 I:0 B:3 t:0 L:0 i:3 W:0 | i386/pc686: spfatal31.exe
<<skipping passes>>
[509/677] p:448 f:6 u:6 e:23 I:0 B:3 t:0 L:0 i:3 W:0 | i386/pc686: spfatal33.exe
Result: invalid
Time: 0:00:00.502665 spfatal33.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/spfatal33.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..
] Booting from ROM..
[510/677] p:448 f:6 u:6 e:23 I:0 B:3 t:0 L:0 i:3 W:0 | i386/pc686: spfatal34.exe
<<skipping passes>>
[521/677] p:455 f:7 u:6 e:23 I:0 B:3 t:0 L:0 i:4 W:0 | i386/pc686: spinternalerror01.exe
Result: invalid
Time: 0:00:00.251533 spinternalerror01.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/spinternalerror01.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..
] Booting from ROM..
[522/677] p:455 f:7 u:6 e:23 I:0 B:3 t:0 L:0 i:4 W:0 | i386/pc686: spinternalerror02.exe
Result: failed
Time: 0:00:01.517240 spinternalerror02.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/spinternalerror02.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: SPINTERNALERROR 2
] *** BEGIN OF TEST SPINTERNALERROR 2 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] INTERNAL_ERROR_NO_CONFIGURATION_TABLE
] INTERNAL_ERROR_NO_CPU_TABLE
] INTERNAL_ERROR_TOO_LITTLE_WORKSPACE
] INTERNAL_ERROR_WORKSPACE_ALLOCATION
] INTERNAL_ERROR_INTERRUPT_STACK_TOO_SMALL
] INTERNAL_ERROR_THREAD_EXITTED
] INTERNAL_ERROR_INCONSISTENT_MP_INFORMATION
] INTERNAL_ERROR_INVALID_NODE
] INTERNAL_ERROR_NO_MPCI
] INTERNAL_ERROR_BAD_PACKET
] INTERNAL_ERROR_OUT_OF_PACKETS
] INTERNAL_ERROR_OUT_OF_GLOBAL_OBJECTS
] INTERNAL_ERROR_OUT_OF_PROXIES
] INTERNAL_ERROR_INVALID_GLOBAL_ID
] INTERNAL_ERROR_BAD_STACK_HOOK
] INTERNAL_ERROR_BAD_ATTRIBUTES
] INTERNAL_ERROR_IMPLEMENTATION_KEY_CREATE_INCONSISTENCY
] INTERNAL_ERROR_IMPLEMENTATION_BLOCKING_OPERATION_CANCEL
] INTERNAL_ERROR_THREAD_QUEUE_ENQUEUE_FROM_BAD_STATE
] INTERNAL_ERROR_UNLIMITED_AND_MAXIMUM_IS_0
] INTERNAL_ERROR_SHUTDOWN_WHEN_NOT_UP
] INTERNAL_ERROR_GXX_KEY_ADD_FAILED
] INTERNAL_ERROR_GXX_MUTEX_INIT_FAILED
] INTERNAL_ERROR_NO_MEMORY_FOR_HEAP
] INTERNAL_ERROR_CPU_ISR_INSTALL_VECTOR
] INTERNAL_ERROR_RESOURCE_IN_USE
] INTERNAL_ERROR_RTEMS_INIT_TASK_ENTRY_IS_NULL
] INTERNAL_ERROR_POSIX_INIT_THREAD_ENTRY_IS_NULL
] INTERNAL_ERROR_THREAD_QUEUE_DEADLOCK
] INTERNAL_ERROR_THREAD_QUEUE_ENQUEUE_STICKY_FROM_BAD_STATE
] INTERNAL_ERROR_BAD_THREAD_DISPATCH_DISABLE_LEVEL
] INTERNAL_ERROR_BAD_THREAD_DISPATCH_ENVIRONMENT
] INTERNAL_ERROR_RTEMS_INIT_TASK_CREATE_FAILED
] INTERNAL_ERROR_POSIX_INIT_THREAD_CREATE_FAILED
] INTERNAL_ERROR_LIBIO_USER_ENV_KEY_CREATE_FAILED
] INTERNAL_ERROR_LIBIO_SEM_CREATE_FAILED
] INTERNAL_ERROR_LIBIO_STDOUT_FD_OPEN_FAILED
] INTERNAL_ERROR_LIBIO_STDERR_FD_OPEN_FAILED
] INTERNAL_ERROR_ILLEGAL_USE_OF_FLOATING_POINT_UNIT
] INTERNAL_ERROR_ARC4RANDOM_GETENTROPY_FAIL
] INTERNAL_ERROR_NO_MEMORY_FOR_PER_CPU_DATA
] INTERNAL_ERROR_TOO_LARGE_TLS_SIZE
] INTERNAL_ERROR_RTEMS_INIT_TASK_CONSTRUCT_FAILED
] INTERNAL_ERROR_IDLE_THREAD_CREATE_FAILED
] INTERNAL_ERROR_NO_MEMORY_FOR_IDLE_TASK_STORAGE
] INTERNAL_ERROR_IDLE_THREAD_STACK_TOO_SMALL
] INTERNAL_ERROR_LIBIO_STDIN_FD_OPEN_FAILED
] ?
] ?
] ../../../testsuites/sptests/spinternalerror02/init.c: 51 error - 3 == INTERNAL_ERROR_IDLE_THREAD_STACK_TOO_SMALL
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[523/677] p:458 f:7 u:6 e:23 I:0 B:3 t:0 L:0 i:5 W:0 | i386/pc686: spintr_err01.exe
<<skipping passes>>
[596/677] p:530 f:8 u:6 e:23 I:0 B:3 t:0 L:0 i:5 W:0 | i386/pc686: sptimecounter01.exe
Result: invalid
Time: 0:00:00.502912 sptimecounter01.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/sptimecounter01.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..
] Booting from ROM..
[597/677] p:530 f:8 u:6 e:23 I:0 B:3 t:0 L:0 i:5 W:0 | i386/pc686: sptimecounter02.exe
Result: failed
Time: 0:00:02.507972 sptimecounter02.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/sptimecounter02.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: SPTIMECOUNTER 2
] *** BEGIN OF TEST SPTIMECOUNTER 2 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] *** BEGIN OF JSON DATA ***
] [
] ../../../testsuites/sptests/sptimecounter02/init.c: 181 error * error < SBT_1MS * SBT_1MS
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[598/677] p:530 f:8 u:6 e:23 I:0 B:3 t:0 L:0 i:5 W:0 | i386/pc686: sptimecounter03.exe
<<skipping passes>>
[604/677] p:534 f:8 u:6 e:23 I:0 B:3 t:0 L:0 i:6 W:0 | i386/pc686: sptls01.exe
Result: failed
Time: 0:00:01.505771 sptls01.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/sptests/sptls01.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: SPTLS 1
] *** BEGIN OF TEST SPTLS 1 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] TLS item = 123
] TLS item = 123
] ../../../testsuites/sptests/sptls01/init.c: 142 *other_tls_item == 123
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[605/677] p:539 f:8 u:6 e:23 I:0 B:3 t:0 L:0 i:6 W:0 | i386/pc686: sptls02.exe
<<skipping passes>>
[654/677] p:582 f:10 u:6 e:23 I:0 B:3 t:0 L:0 i:6 W:0 | i386/pc686: ts-unit-no-clock-0.exe
Result: timeout
Time: 0:12:03.638559 ts-unit-no-clock-0.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/unit/ts-unit-no-clock-0.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
]
]
=> test start: TestsuitesUnitNoClock0
] *** BEGIN OF TEST TestsuitesUnitNoClock0 ***
] *** TEST VERSION: 6.2.0.not-released
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] A:TestsuitesUnitNoClock0
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] S:Version:6.2.0.not-released
] S:BSP:pc686
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:88YxI_BcN0LiTylhghE9z0TpoFSPW688YjCWrEQn2Is=
] S:RTEMS_DEBUG:0
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:ScoreRbtreeUnitRbtree
] E:ScoreRbtreeUnitRbtree:N:495132:F:0:D:0.000000
] B:ScoreMsgqUnitMsgq
] raw_idt_notify has been called
] *** TIMEOUT TIMEOUT
[655/677] p:583 f:10 u:6 e:23 I:0 B:3 t:0 L:0 i:6 W:0 | i386/pc686: ts-fatal-extension.exe
[656/677] p:587 f:10 u:6 e:23 I:0 B:3 t:0 L:0 i:6 W:0 | i386/pc686: ts-fatal-idle-thread-create-failed.exe
Result: invalid
Time: 0:00:01.505421 ts-fatal-idle-thread-create-failed.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/validation/ts-fatal-idle-thread-create-failed.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
] B:ScoreThreadValFatalIdleThreadCreateFailed
] E:ScoreThreadValFatalIdleThreadCreateFailed:N:2:F:0:D:0.000000
] Z:TestsuitesFatalIdleThreadCreateFailed:C:1:N:2:F:0:D:0.000000
] Y:ReportHash:SHA256:QPtLS-yhGfBAUdLL_WEZ_FT2lWzBVyhBseJc2KAmtD0=
]
] *** END OF TEST TestsuitesFatalIdleThreadCreateFailed ***
]
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread is NULL
[657/677] p:587 f:10 u:6 e:23 I:0 B:3 t:0 L:0 i:6 W:0 | i386/pc686: ts-fatal-idle-thread-stack-too-small.exe
Result: invalid
Time: 0:00:01.511222 ts-fatal-idle-thread-stack-too-small.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/validation/ts-fatal-idle-thread-stack-too-small.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
] B:ScoreThreadValFatalIdleThreadStackTooSmall
] E:ScoreThreadValFatalIdleThreadStackTooSmall:N:3:F:0:D:0.000000
] Z:TestsuitesFatalIdleThreadStackTooSmall:C:1:N:3:F:0:D:0.000000
] Y:ReportHash:SHA256:RbURvp4utZbhuun6VoqBDPr8KhFRHKgYskclwiABcU0=
]
] *** END OF TEST TestsuitesFatalIdleThreadStackTooSmall ***
]
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread is NULL
[658/677] p:587 f:10 u:6 e:23 I:0 B:3 t:0 L:0 i:6 W:0 | i386/pc686: ts-fatal-init-task-construct-failed.exe
Result: invalid
Time: 0:00:01.505751 ts-fatal-init-task-construct-failed.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/validation/ts-fatal-init-task-construct-failed.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..i386: isr=0 irr=1
] i386: isr=0 irr=1
] B:AcfgValFatalInitTaskConstructFailed
] E:AcfgValFatalInitTaskConstructFailed:N:3:F:0:D:0.000000
] Z:TestsuitesFatalInitTaskConstructFailed:C:1:N:3:F:0:D:0.000000
] Y:ReportHash:SHA256:wfdjPOGHqg3wc_NiNPlwVBymhac3LnFCw9iFoOX6Yxg=
]
] *** END OF TEST TestsuitesFatalInitTaskConstructFailed ***
]
]
] [ RTEMS shutdown ]
] RTEMS version: 6.2.0.not-released
] RTEMS tools: 13.3.0 20240521 (RTEMS 6, RSB no-repo, Newlib 1b3dcfd)
] executing thread ID: 0x09010001
] executing thread name: IDLE
[659/677] p:587 f:10 u:6 e:23 I:0 B:3 t:0 L:0 i:6 W:0 | i386/pc686: ts-fatal-too-large-tls-size.exe
Result: invalid
Time: 0:00:00.503647 ts-fatal-too-large-tls-size.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/validation/ts-fatal-too-large-tls-size.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] Booting from ROM..
] Booting from ROM..
[660/677] p:591 f:10 u:6 e:23 I:0 B:3 t:0 L:0 i:6 W:0 | i386/pc686: ts-performance-no-clock-0.exe
<<skipping passes>>
[669/677] p:595 f:11 u:6 e:23 I:0 B:3 t:0 L:0 i:7 W:0 | i386/pc686: ts-validation-io-kernel.exe
Result: timeout
Time: 0:12:01.154005 ts-validation-io-kernel.exe
=> exe: qemu-system-i386 -no-reboot -nographic -monitor none -serial stdio -append --console=/dev/com1 -kernel b-pc686/i386/pc686/testsuites/validation/ts-validation-io-kernel.exe
] c[?7l[2J[0mSeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
]
]
] iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F130+07EEF130 CA00
] Press Ctrl-B to configure iPXE (PCI 00:03.0)...
]
]
] *** TIMEOUT TIMEOUT
[670/677] p:595 f:11 u:6 e:23 I:0 B:3 t:0 L:0 i:10 W:0 | i386/pc686: ts-validation-no-clock-0.exe
<<skipping passes>>
[677/677] p:601 f:11 u:6 e:23 I:0 B:3 t:0 L:0 i:10 W:0 | i386/pc686: ts-validation-tls-1.exe
Passed: 618
Failed: 11
User Input: 6
Expected Fail: 27
Indeterminate: 0
Benchmark: 3
Timeout: 2
Test too long: 0
Invalid: 10
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 677
Failures:
dl06.exe
psx09.exe
psx12.exe
sp69.exe
spfatal26.exe
spfatal30.exe
spinternalerror02.exe
sptimecounter02.exe
sptls01.exe
math.exe
tmcontext01.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
psxfenv01.exe
ts-performance-no-clock-0.exe
ts-validation-intr.exe
ts-validation-no-clock-0.exe
ts-validation-one-cpu-0.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
ts-unit-no-clock-0.exe
ts-validation-io-kernel.exe
Invalid:
sp54.exe
spfatal09.exe
spfatal12.exe
spfatal33.exe
spinternalerror01.exe
sptimecounter01.exe
ts-fatal-idle-thread-create-failed.exe
ts-fatal-idle-thread-stack-too-small.exe
ts-fatal-init-task-construct-failed.exe
ts-fatal-too-large-tls-size.exe
Average test time: 0:00:01.228827
Testing time : 0:13:51.915879
More information about the build
mailing list