Build Linux: FAILED 7/rtems-m68k on x86_64-linux-gnu (m68k-rtems7-binutils-2.44-x86_64-linux-gnu-1)
joel at rtems.org
joel at rtems.org
Tue Feb 11 15:59:49 UTC 2025
RTEMS Source Builder - Set Builder, 7 (d5d9d1a44701 modified)
Host: Linux-5.14.0-503.19.1.el9_5.x86_64-x86_64-with-glibc2.34
Linux gitlab.oarcorp.com 5.14.0-503.19.1.el9_5.x86_64 #1 SMP
PREEMPT_DYNAMIC Thu Dec 19 12:55:03 UTC 2024 x86_64 x86_64
Build Time: 0:05:44.203933
Output
======
Build Set: 7/rtems-m68k
Build Set: tools/rtems-default-tools.bset
config: devel/dtc-1.7.2-1.cfg
package: dtc-1.7.2-x86_64-linux-gnu-1
building: dtc-1.7.2-x86_64-linux-gnu-1
sizes: dtc-1.7.2-x86_64-linux-gnu-1: 4.388MB (installed: 1.129MB)
cleaning: dtc-1.7.2-x86_64-linux-gnu-1
reporting: devel/dtc-1.7.2-1.cfg -> dtc-1.7.2-x86_64-linux-gnu-1.txt
reporting: devel/dtc-1.7.2-1.cfg -> dtc-1.7.2-x86_64-linux-gnu-1.xml
Build Set: devel/expat-internal.bset
config: devel/expat-2.5.0-1.cfg
package: expat-2.5.0-x86_64-linux-gnu-1
building: expat-2.5.0-x86_64-linux-gnu-1
sizes: expat-2.5.0-x86_64-linux-gnu-1: 9.014MB (installed: 0.000B)
cleaning: expat-2.5.0-x86_64-linux-gnu-1
cleaning: expat-2.5.0-x86_64-linux-gnu-1
Build Set: Time 0:00:18.143675
Build Set: devel/gmp-internal.bset
config: devel/gmp-6.3.0.cfg
package: gmp-6.3.0-x86_64-linux-gnu-1
building: gmp-6.3.0-x86_64-linux-gnu-1
sizes: gmp-6.3.0-x86_64-linux-gnu-1: 35.497MB (installed: 0.000B)
cleaning: gmp-6.3.0-x86_64-linux-gnu-1
cleaning: gmp-6.3.0-x86_64-linux-gnu-1
Build Set: Time 0:00:47.732131
Build Set: devel/mpfr-internal.bset
config: devel/mpfr-4.2.1.cfg
package: mpfr-4.2.1-x86_64-linux-gnu-1
building: mpfr-4.2.1-x86_64-linux-gnu-1
sizes: mpfr-4.2.1-x86_64-linux-gnu-1: 20.194MB (installed: 0.000B)
cleaning: mpfr-4.2.1-x86_64-linux-gnu-1
cleaning: mpfr-4.2.1-x86_64-linux-gnu-1
Build Set: Time 0:00:22.023627
Build Set: textproc/gsed-internal.bset
config: textproc/gsed.cfg
Build Set: Time 0:00:00.023803
Build Set: print/texinfo-internal.bset
config: print/texinfo.cfg
package: texinfo-7.0.3-x86_64-linux-gnu-1
building: texinfo-7.0.3-x86_64-linux-gnu-1
sizes: texinfo-7.0.3-x86_64-linux-gnu-1: 93.059MB (installed: 0.000B)
cleaning: texinfo-7.0.3-x86_64-linux-gnu-1
cleaning: texinfo-7.0.3-x86_64-linux-gnu-1
Build Set: Time 0:01:02.695279
config: tools/rtems-gdb-16.2.cfg
package: m68k-rtems7-gdb-16.2-x86_64-linux-gnu-1
building: m68k-rtems7-gdb-16.2-x86_64-linux-gnu-1
sizes: m68k-rtems7-gdb-16.2-x86_64-linux-gnu-1: 1.135GB (installed: 179.749MB)
cleaning: m68k-rtems7-gdb-16.2-x86_64-linux-gnu-1
reporting: tools/rtems-gdb-16.2.cfg -> m68k-rtems7-gdb-16.2-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gdb-16.2.cfg -> m68k-rtems7-gdb-16.2-x86_64-linux-gnu-1.xml
config: tools/rtems-binutils-2.44.cfg
package: m68k-rtems7-binutils-2.44-x86_64-linux-gnu-1
warning: checksum error: binutils-2.44.tar.bz2
warning: removing: binutils-2.44.tar.bz2
download: https://ftp.gnu.org/gnu/binutils/binutils-2.44.tar.bz2 -> sources/binutils-2.44.tar.bz2
warning: checksum error: binutils-2.44.tar.bz2
error: checksum failure file: sources/binutils-2.44.tar.bz2
Build FAILED
See error report: rsb-report-m68k-rtems7-binutils-2.44-x86_64-linux-gnu-1.txt
Note: In some cases the error appears only in
the complete build log (see --log option)
error: checksum failure file: sources/binutils-2.44.tar.bz2
Build Set: Time 0:05:44.198336
error: checksum failure file: sources/binutils-2.44.tar.bz2
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Feb 11 09:54:20 2025
==============================================================================
Report: devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: d5d9d1a4470134ea9292514c43d6a57402564578
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.7.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.7.2-x86_64-linux-gnu-1
Config: devel/dtc-1.7.2-1.cfg
Summary:
Device Tree Compiler v1.7.2 for target m68k-rtems7 on host x86_64-linux-gnu
URL:
https://www.devicetree.org/
Version:
1.7.2
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.7.2.tar.xz
sha512: MPNhEXWlwpVWKC8/KJRwGlg364aWCNideMKAr0SLvDpbbIP1HCj5kYR8DrfEKqV1mbvDFDPxs7LI0WLLIWm5Hw==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.7.2
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.7.2
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/joel/rtems-work/tools/7 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.7.2
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/joel/rtems-work/tools/7 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Feb 11 09:54:20 2025
==============================================================================
Report: devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: d5d9d1a4470134ea9292514c43d6a57402564578
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.7.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.7.2-x86_64-linux-gnu-1
Config: devel/dtc-1.7.2-1.cfg
Summary:
Device Tree Compiler v1.7.2 for target m68k-rtems7 on host x86_64-linux-gnu
URL:
https://www.devicetree.org/
Version:
1.7.2
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.7.2.tar.xz
sha512: MPNhEXWlwpVWKC8/KJRwGlg364aWCNideMKAr0SLvDpbbIP1HCj5kYR8DrfEKqV1mbvDFDPxs7LI0WLLIWm5Hw==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.7.2
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.7.2
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/joel/rtems-work/tools/7 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.7.2
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/joel/rtems-work/tools/7 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Feb 11 09:59:20 2025
==============================================================================
Report: tools/rtems-gdb-16.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: d5d9d1a4470134ea9292514c43d6a57402564578
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-16.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-16.2.cfg
------------------------------------------------------------------------------
Package: m68k-rtems7-gdb-16.2-x86_64-linux-gnu-1
Config: tools/rtems-gdb-16.2.cfg
Summary:
GDB v16.2 for target m68k-rtems7 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
16.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-16.2.tar.xz
sha512: 8EpjNdve43Htt+MhMpT8u4eKw5re23P34X5iH1Q1BIj19b6pvHQmOSOcEi1ZC+0Vh3GnT8Oq6qf6CuMEIyV2ow==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-16.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "m68k-rtems7" -o "x86_64-linux-gnu" == "m68k-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=m68k-rtems7 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/home/joel/rtems-work/tools/7 --bindir=/home/joel/rtems-work/tools/7/bin --exec-prefix=/home/joel/rtems-work/tools/7 --includedir=/home/joel/rtems-work/tools/7/include --libdir=/home/joel/rtems-work/tools/7/lib --mandir=/home/joel/rtems-work/tools/7/share/man --infodir=/home/joel/rtems-work/tools/7/share/info
make -j 56 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Tue Feb 11 09:59:21 2025
==============================================================================
Report: tools/rtems-gdb-16.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Repository is dirty
Head:
Commit: d5d9d1a4470134ea9292514c43d6a57402564578
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-16.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-16.2.cfg
------------------------------------------------------------------------------
Package: m68k-rtems7-gdb-16.2-x86_64-linux-gnu-1
Config: tools/rtems-gdb-16.2.cfg
Summary:
GDB v16.2 for target m68k-rtems7 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
16.2
Release:
1
Sources: 1
1: https://ftp.gnu.org/gnu/gdb/gdb-16.2.tar.xz
sha512: 8EpjNdve43Htt+MhMpT8u4eKw5re23P34X5iH1Q1BIj19b6pvHQmOSOcEi1ZC+0Vh3GnT8Oq6qf6CuMEIyV2ow==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
Preparation:
build_top=$(pwd)
gdb_source="gdb-16.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "m68k-rtems7" -o "x86_64-linux-gnu" == "m68k-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=m68k-rtems7 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/home/joel/rtems-work/tools/7 --bindir=/home/joel/rtems-work/tools/7/bin --exec-prefix=/home/joel/rtems-work/tools/7 --includedir=/home/joel/rtems-work/tools/7/include --libdir=/home/joel/rtems-work/tools/7/lib --mandir=/home/joel/rtems-work/tools/7/share/man --infodir=/home/joel/rtems-work/tools/7/share/info
make -j 56 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/joel/rtems-work/tools/7/share/info/dir
cd ${build_top}
More information about the build
mailing list