[rtems-test] powerpc/psim: RTEMS_POSIX_API: Passed:637 Failed:9 Timeout:0 Test-Too-long:0 Invalid:0 Wrong:0
OAR Tester for Rocky Linux 9
rtems-tester at oarcorp.com
Mon Mar 10 21:21:06 UTC 2025
Testing time : 0:04:17.870379
Average test time: 0:00:00.380340
Host
====
Linux-5.14.0-503.21.1.el9_5.x86_64-x86_64-with-glibc2.34 (Linux rocky9.rtems.com 5.14.0-503.21.1.el9_5.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Jan 8 17:35:30 UTC 2025 x86_64 x86_64)
Configuration
=============
Version: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
Build : RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
Summary
=======
Passed: 637
Failed: 9
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 0
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 678
Failures:
dl06.exe
fsimfsgeneric01.exe
psx09.exe
psx12.exe
psxkey08.exe
spfatal26.exe
ttest01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-7/tools/7/bin/rtems-test --jobs 24 --rtems-tools=/home/tester/rtems-cron-7/tools/7 --rtems-bsp=psim --log=run-psim.log --use-gitconfig --mail b-psim
Host: Linux rocky9.rtems.com 5.14.0-503.21.1.el9_5.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Jan 8 17:35:30 UTC 2025 x86_64
Python: 3.9.21 (main, Dec 5 2024, 00:00:00) [GCC 11.5.0 20240719 (Red Hat 11.5.0-2)]
Host: Linux-5.14.0-503.21.1.el9_5.x86_64-x86_64-with-glibc2.34 (Linux rocky9.rtems.com 5.14.0-503.21.1.el9_5.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Jan 8 17:35:30 UTC 2025 x86_64 x86_64)
[ 1/678] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: dhrystone.exe
<<skipping passes>>
[ 15/678] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: fsimfsgeneric01.exe
Result: failed
Time: 0:00:28.113992 fsimfsgeneric01.exe
=> gdb: /home/tester/rtems-cron-7/tools/7/bin/powerpc-rtems7-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe...
=> warning: File "/home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=>
=> add-auto-load-safe-path /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=>
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-7/tools/7/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/fstests/fsimfsgeneric01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] ../../../testsuites/fstests/fsimfsgeneric01/init.c: 481 rtems_resource_snapshot_check(&before)
=> test end: FSIMFSGENERIC 1
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
[ 16/678] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | powerpc/psim: fsjffs2empty01.exe
<<skipping passes>>
[134/678] p:87 f:1 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl06.exe
Result: failed
Time: 0:00:06.793492 dl06.exe
=> gdb: /home/tester/rtems-cron-7/tools/7/bin/powerpc-rtems7-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/dl06.exe...
=> warning: File "/home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=>
=> add-auto-load-safe-path /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=>
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-7/tools/7/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/libtests/dl06.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] load: /dl06.rap
] dlopen failed: global symbol not found: _tls_rand48_add
=> test end: libdl (RTL) 6
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
[135/678] p:87 f:1 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: dl07.exe
<<skipping passes>>
[203/678] p:150 f:2 u:2 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: ttest01.exe
Result: failed
Time: 0:00:06.269270 ttest01.exe
=> gdb: /home/tester/rtems-cron-7/tools/7/bin/powerpc-rtems7-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/libtests/ttest01.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/libtests/ttest01.exe...
=> warning: File "/home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/libtests/ttest01.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=>
=> add-auto-load-safe-path /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/libtests/ttest01.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=>
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-7/tools/7/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/libtests/ttest01.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: TTEST 1
] *** BEGIN OF TEST TTEST 1 ***
] *** TEST VERSION: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] A:ttest01
] S:Platform:RTEMS
] S:Compiler:*
] S:Version:*
] S:BSP:*
] S:BuildLabel:*
] S:TargetHash:SHA256:*
] S:RTEMS_DEBUG:*
] S:RTEMS_MULTIPROCESSING:*
] S:RTEMS_POSIX_API:*
] S:RTEMS_PROFILING:*
] S:RTEMS_SMP:*
] B:zalloc_auto
] P:0:0:UI1:test-malloc.c:35
] P:1:0:UI1:test-malloc.c:36
] P:2:0:UI1:test-malloc.c:26
] E:zalloc_auto:N:3:F:0:D:0.001000
] B:wrong_step
] P:0:0:UI1:test-plan.c:6
] F:1:0:UI1:test-plan.c:7:planned step (2)
] E:wrong_step:N:2:F:1:D:0.001000
] B:verbosity_changes
] F:3:0:UI1:test-verbosity.c:12:normal: check fails -> with output
] P:4:0:UI1:test-verbosity.c:14
] F:5:0:UI1:test-verbosity.c:15:verbose: check fails -> with output
] E:verbosity_changes:N:6:F:3:D:0.001000
] B:timer
] P:0:0:UI1:test-rtems.c:26
] P:1:0:UI1:test-rtems.c:29
] P:2:0:UI1:test-rtems.c:39
] P:3:0:ISR:test-rtems.c:14
] P:4:0:ISR:test-rtems.c:15
] P:5:0:UI1:test-rtems.c:44
] P:6:0:UI1:test-rtems.c:45
] P:7:0:UI1:test-rtems.c:48
] E:timer:N:8:F:0:D:0.001000
] B:time_to_string
] P:0:0:UI1:test-time.c:11
] P:1:0:UI1:test-time.c:12
] P:2:0:UI1:test-time.c:13
] P:3:0:UI1:test-time.c:14
] P:4:0:UI1:test-time.c:17
] P:5:0:UI1:test-time.c:18
] E:time_to_string:N:6:F:0:D:0.001000
] B:time
] P:0:0:UI1:test-time.c:55
] P:1:0:UI1:test-time.c:56
] P:2:0:UI1:test-time.c:57
] P:3:0:UI1:test-time.c:58
] P:4:0:UI1:test-time.c:61
] P:5:0:UI1:test-time.c:63
] P:6:0:UI1:test-time.c:64
] P:7:0:UI1:test-time.c:67
] P:8:0:UI1:test-time.c:69
] P:9:0:UI1:test-time.c:70
] P:10:0:UI1:test-time.c:73
] P:11:0:UI1:test-time.c:75
] P:12:0:UI1:test-time.c:76
] P:13:0:UI1:test-time.c:79
] P:14:0:UI1:test-time.c:81
] P:15:0:UI1:test-time.c:82
] P:16:0:UI1:test-time.c:85
] P:17:0:UI1:test-time.c:87
] P:18:0:UI1:test-time.c:88
] P:19:0:UI1:test-time.c:91
] P:20:0:UI1:test-time.c:93
] P:21:0:UI1:test-time.c:94
] P:22:0:UI1:test-time.c:97
] P:23:0:UI1:test-time.c:99
] P:24:0:UI1:test-time.c:100
] P:25:0:UI1:test-time.c:103
] P:26:0:UI1:test-time.c:105
] P:27:0:UI1:test-time.c:106
] P:28:0:UI1:test-time.c:109
] P:29:0:UI1:test-time.c:111
] P:30:0:UI1:test-time.c:112
] P:31:0:UI1:test-time.c:115
] P:32:0:UI1:test-time.c:117
] P:33:0:UI1:test-time.c:118
] P:34:0:UI1:test-time.c:121
] P:35:0:UI1:test-time.c:123
] P:36:0:UI1:test-time.c:124
] P:37:0:UI1:test-time.c:127
] P:38:0:UI1:test-time.c:129
] P:39:0:UI1:test-time.c:130
] E:time:N:40:F:0:D:0.001000
] B:ticks
] P:0:0:UI1:test-time.c:147
] P:1:0:UI1:test-time.c:151
] P:2:0:UI1:test-time.c:152
] FAILED:80:*ctx->c == c
=> test end: TTEST 1
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[204/678] p:151 f:2 u:2 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: ttest02.exe
<<skipping passes>>
[216/678] p:162 f:2 u:3 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx09.exe
Result: failed
Time: 0:00:06.649108 psx09.exe
=> gdb: /home/tester/rtems-cron-7/tools/7/bin/powerpc-rtems7-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx09.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx09.exe...
=> warning: File "/home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx09.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=>
=> add-auto-load-safe-path /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx09.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=>
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-7/tools/7/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx09.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 9
] *** BEGIN OF TEST PSX 9 ***
] *** TEST VERSION: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_getschedparam - SUCCESSFUL
] Init: Fri May 24 11:05:00 1996 - current priority = 2
] Init: pthread_setschedparam - SUCCESSFUL (sporadic server)
] Init: Fri May 24 11:05:00 1996 - new priority = 253
] Init: Fri May 24 11:05:00 1996 - new priority = 253
] Init: Fri May 24 11:05:00 1996 - new priority = 252
] Init: Fri May 24 11:05:01 1996 - new priority = 253
] Init: Fri May 24 11:05:02 1996 - new priority = 252
] Init: pthread_setschedparam - SUCCESSFUL (sporadic server)
] Init: Initializing mutex attributes for priority ceiling
] Init: Creating a mutex
] Init: Fri May 24 11:05:02 1996 - new priority = 253
] Init: Go into low priority and lock/unlock ceiling mutex
] Init: Go into high priority and lock/unlock ceiling mutex
] Init: Go into low priority and change scheduler parameters
] Init: Go into low priority and set POSIX priority
] Init: Go into low priority and set RTEMS priority
] Init: Go into low priority and set scheduler
] ../../../testsuites/psxtests/psx09/init.c: 342 sc == RTEMS_SUCCESSFUL
=> test end: PSX 9
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
[217/678] p:165 f:2 u:3 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx10.exe
<<skipping passes>>
[219/678] p:165 f:2 u:3 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx12.exe
Result: failed
Time: 0:00:05.856460 psx12.exe
=> gdb: /home/tester/rtems-cron-7/tools/7/bin/powerpc-rtems7-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psx12.exe...
=> warning: File "/home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=>
=> add-auto-load-safe-path /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=>
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-7/tools/7/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/psxtests/psx12.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSX 12
] *** BEGIN OF TEST PSX 12 ***
] *** TEST VERSION: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_attr_init - SUCCESSFUL
] Init: pthread_create - EINVAL (invalid scheduling policy)
] Init: pthread_attr_init - SUCCESSFUL
] Init: set scheduling parameter attributes for sporadic server
] Init: pthread_create - EINVAL (replenish < budget)
] Init: pthread_create - EINVAL (invalid sched_ss_low_priority)
] Init: pthread_create - SUCCESSFUL
] Sporadic Server: exitting
] [0] H 97ms
] [0] L 197ms
] ../../../testsuites/psxtests/psx12/init.c: 245 ctx->samples[ i ].low / SS_REPL_PERIOD_MS == i + 1
=> test end: PSX 12
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] executing thread ID: 0x0b010001
] executing thread name:
=> [Inferior 1 (process 42000) exited with code 05]
[220/678] p:167 f:2 u:3 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psx13.exe
<<skipping passes>>
[277/678] p:219 f:5 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psxkey08.exe
Result: failed
Time: 0:00:06.051282 psxkey08.exe
=> gdb: /home/tester/rtems-cron-7/tools/7/bin/powerpc-rtems7-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe...
=> warning: File "/home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=>
=> add-auto-load-safe-path /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=>
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-7/tools/7/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/psxtests/psxkey08.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: PSXKEY 8
] *** BEGIN OF TEST PSXKEY 8 ***
] *** TEST VERSION: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] Init - Semaphore 1 create - OK
] Init - Semaphore 2 create - OK
] Init - pthread Key create - OK
] Init - 12 tasks have been created - OK
] Init - 12 tasks have been setted key data - OK
] Init - release semaphore 2 - OK
] Init - 12 Tasks have been got key data - OK
] Init - pthread Key delete - OK
] Init - semaphore 1 delete - OK
] Init - semaphore 2 delete - OK
] ../../../testsuites/psxtests/psxkey08/init.c: 181 rtems_resource_snapshot_check(&snapshot)
=> test end: PSXKEY 8
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 05]
[278/678] p:220 f:5 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: psxkey09.exe
<<skipping passes>>
[504/678] p:445 f:6 u:6 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: spfatal26.exe
Result: failed
Time: 0:00:00.831761 spfatal26.exe
=> gdb: /home/tester/rtems-cron-7/tools/7/bin/powerpc-rtems7-gdb -i=mi --nx --quiet b-psim/powerpc/psim/testsuites/sptests/spfatal26.exe
=> Reading symbols from b-psim/powerpc/psim/testsuites/sptests/spfatal26.exe...
=> warning: File "/home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal26.exe" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".
=> To enable execution of this file add
=>
=> add-auto-load-safe-path /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal26.exe
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> To completely disable this security protection add
=>
=> set auto-load safe-path /
=> line to your configuration file "
=> /home/tester/.config/gdb/gdbinit".
=> For more information about this security protection see the
=> "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
=> info "(gdb)Auto-loading safe path"
=> target sim -f /home/tester/rtems-cron-7/tools/7/share/rtems/tester/rtems/testing/bsps/psim-device-tree
=> Connected to the simulator.
=> load
=> run
=> Starting program: /home/tester/rtems-cron-7/rtems/b-psim/powerpc/psim/testsuites/sptests/spfatal26.exe
] OpenPIC Version 1.2 (2 CPUs and 17 IRQ sources) at 0x4229103616
] OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0
] Overriding NumSources (17) from configuration with 16
] OpenPIC timer frequency is 1 Hz
] BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0
=> test start: SPFATAL 26
] *** BEGIN OF TEST SPFATAL 26 ***
] *** TEST VERSION: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] exception vector 7 (0x7)
] next PC or address of fault = 0x00000260
] saved MSR = 0x0008a072
] context = task, ISR nest level = 0
] thread dispatch disable level = 0
] R0 = 0x00000260 R1 = 0x00027fd8 R2 = 0x0002f010 R3 = 0x0000010a
] p"
] R4 = 0x00000000 Rtion vector 7 (0x7)
] next PC or address of fault = 0x00000260
] saved MSR = 0x0008a072
] context = task, ISR nest level = 0
] thread dispatch disable level = 0
] R0 = 0x00000260 R1 = 0x00027fd8 R2 = 0x0002f010 R3 = 0x0000010a
] R4 = 0x00000000 R5 = 0x00000000 R6 = 0x00000000 R7 = 0x80808080
] R8 = 0x53000000 R9 = 0x0000cdf3 R10 = 0x00000020 R11 = 0x0000dc98
] R12 = 0x40000000 R13 = 0x000187fc R14 = 0x00000000 R15 = 0x00000000
] R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
] R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
] R24 = 0x00000000 R25 = 0x00000000 R26 = 0x00000000 R27 = 0x00000000
] R28 = 0x00000000 R29 = 0x00000000 R30 = 0x000215c0 R31 = 0x000239c8
] CR = 0x20000000
] CTR = 0x0000c0b4
] XER = 0x20000000
] LR = 0x00000260
] DAR = 0x00000000
] executing thread ID = 0x0a010001, name = UI1
] Stack Trace:
] IP: 0x00000260, LR: 0x00000260
] --^ 0x00000e9c--^ 0x00000df0
] RTEMS version: 7.0.0.9e7371709d6e7f5a6fc0a8c05cc7da30486b1af4
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 04a84f76056858cd04e16c49cb844b7fe44b38df, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
=> [Inferior 1 (process 42000) exited with code 011]
[505/678] p:445 f:6 u:6 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: spfatal28.exe
<<skipping passes>>
[678/678] p:616 f:9 u:6 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | powerpc/psim: ts-validation-tls-1.exe
Passed: 637
Failed: 9
User Input: 6
Expected Fail: 23
Indeterminate: 0
Benchmark: 3
Timeout: 0
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 678
Failures:
dl06.exe
fsimfsgeneric01.exe
psx09.exe
psx12.exe
psxkey08.exe
spfatal26.exe
ttest01.exe
spfatal31.exe
ts-fatal-extension.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
ts-validation-intr.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Average test time: 0:00:00.380340
Testing time : 0:04:17.870379
More information about the build
mailing list