[rtems-test] riscv64/rv64imafd: RTEMS_DEBUG, RTEMS_POSIX_API: Passed:625 Failed:19 Timeout:2 Test-Too-long:0 Invalid:0 Wrong:0
OAR Tester for Rocky Linux 9
rtems-tester at oarcorp.com
Tue May 6 04:34:10 UTC 2025
Testing time : 0:16:14.443031
Average test time: 0:00:01.439355
Host
====
Linux-5.14.0-503.21.1.el9_5.x86_64-x86_64-with-glibc2.34 (Linux rocky9.rtems.com 5.14.0-503.21.1.el9_5.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Jan 8 17:35:30 UTC 2025 x86_64 x86_64)
Configuration
=============
Version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
Build : RTEMS_DEBUG,RTEMS_POSIX_API
Tools : 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
Summary
=======
Passed: 625
Failed: 19
User Input: 6
Expected Fail: 22
Indeterminate: 0
Benchmark: 3
Timeout: 2
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 677
Failures:
dl01.exe
dl02.exe
dl05.exe
dl06.exe
dl07.exe
dl08.exe
dl09.exe
dl11.exe
dl12.exe
fsrfsbitmap01.exe
malloc04.exe
psx09.exe
psximfs02.exe
spintrcritical20.exe
termios01.exe
ttest02.exe
dl04.exe
regulator01.exe
ts-validation-intr.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
block11.exe
fsimfsgeneric01.exe
Log
===
RTEMS Testing - Tester, 6.0.not_released
Command Line: /home/tester/rtems-cron-7/tools/7/bin/rtems-test --jobs 24 --rtems-tools=/home/tester/rtems-cron-7/tools/7 --rtems-bsp=rv64imafd_spike --log=run-rv64imafd_spike.log --use-gitconfig --mail b-rv64imafd
Host: Linux rocky9.rtems.com 5.14.0-503.21.1.el9_5.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Jan 8 17:35:30 UTC 2025 x86_64
Python: 3.9.21 (main, Dec 5 2024, 00:00:00) [GCC 11.5.0 20240719 (Red Hat 11.5.0-2)]
Host: Linux-5.14.0-503.21.1.el9_5.x86_64-x86_64-with-glibc2.34 (Linux rocky9.rtems.com 5.14.0-503.21.1.el9_5.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Jan 8 17:35:30 UTC 2025 x86_64 x86_64)
[ 1/677] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dhrystone.exe
<<skipping passes>>
[ 15/677] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: fsimfsgeneric01.exe
Result: timeout
Time: 0:13:54.672242 fsimfsgeneric01.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/fstests/fsimfsgeneric01.exe
]
]
=> test start: FSIMFSGENERIC 1
] *** BEGIN OF TEST FSIMFSGENERIC 1 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] *** TIMEOUT TIMEOUT
[ 16/677] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: fsjffs2empty01.exe
<<skipping passes>>
[ 19/677] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: fsrfsbitmap01.exe
Result: failed
Time: 0:02:12.414733 fsrfsbitmap01.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/fstests/fsrfsbitmap01.exe
]
]
=> test start: FSRFSBITMAP 1
] *** BEGIN OF TEST FSRFSBITMAP 1 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] Initializing filesystem RFS
]
] START of RFS Bitmap Unit Test
] Bit set value : 0
] Bit clear value : 1
] Num bit per element : 32
]
] RFS Bitmap Test : size = 4096 (128)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (4095): pass (Success): bit = 4095
] 5. Test bit 0: pass (Success)
] 6. Test bit (size - 1) (4095): pass (Success)
] 7. Test bit range (1,4094] all clear: pass
] 8. Set all bits: PASS (Success)
] 9. Clear bit 3165: PASS (Success)
] 10. Find bit with seed = 0: pass (Success): bit = 3165
] 11. Fail to find bit with seed = 0: pass (Success): bit = 2048
] 12. Clear bit 0: pass (Success)
] 13. Find bit with seed = (size - 1): pass (Success): bit = 0
] 14. Clear bit (size - 1) (4095): pass (Success)
] 15. Find bit with seed = 0: pass (Success): bit = 4095
] 16. Clear bit 0: pass (Success)
] 17. Find bit with seed = (size / 2) (2048): pass (Success): bit = 0
] 18. Clear bit (size - 1) (4095): pass, (Success)
] 19. Find bit with seed = (size / 2) (2048): pass (Success): bit = 4095
] 20. Clear bit 0: pass (Success)
] 21. Find bit with seed = ((size / 2) - 1) (2047): pass (Success): bit = 0
] 22. Clear bit (size - 1) (4095): pass (Success)
] 23. Find bit with seed = ((size / 2) - 1) (2047): pass (Success): bit = 4095
] 23. Set all bits
] 23. Cleared bits (692, 723] (32)
] 23. Alloc'ed all bits (723, 754] (32)
] 24. Set all bits
] 24. Cleared bits (1706, 1762] (57)
] 24. Alloc'ed all bits (1762, 1818] (57)
] 25. Set all bits: PASS (Success)
] 26. Clear bit (650, 1861]: PASS (Success)
] 27. Check free count is 1211: 1211: pass (Success)
] 28. Create search check free count is 1211: 1211: pass (Success)
] 29. Map set check with bit (4098) larger than size (4096)
] 30. Map clear check with bit (4098) larger than size (4096)
] 31. Map test check with bit (4098) larger than size (4096)
] 32. Set all bits in the map, then clear bit (2048) and set this bit once again: PASSED
] 33. Attempt to find bit when all bits are set (expected FAILED): FAILED
] 34. Clear all bits in the map.
] 35. Set a bit and check accounting.
]
] RFS Bitmap Test : size = 2048 (64)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (2047): pass (Success): bit = 2047
] 5. Test bit 0: pass (Success)
] 6. Test bit (size - 1) (2047): pass (Success)
] 7. Test bit range (1,2046] all clear: pass
] 8. Set all bits: PASS (Success)
] 9. Clear bit 1518: PASS (Success)
] 10. Find bit with seed = 0: pass (Success): bit = 1518
] 11. Fail to find bit with seed = 0: pass (Success): bit = 0
] 12. Clear bit 0: pass (Success)
] 13. Find bit with seed = (size - 1): pass (Success): bit = 0
] 14. Clear bit (size - 1) (2047): pass (Success)
] 15. Find bit with seed = 0: pass (Success): bit = 2047
] 16. Clear bit 0: pass (Success)
] 17. Find bit with seed = (size / 2) (1024): pass (Success): bit = 0
] 18. Clear bit (size - 1) (2047): pass, (Success)
] 19. Find bit with seed = (size / 2) (1024): pass (Success): bit = 2047
] 20. Clear bit 0: pass (Success)
] 21. Find bit with seed = ((size / 2) - 1) (1023): pass (Success): bit = 0
] 22. Clear bit (size - 1) (2047): pass (Success)
] 23. Find bit with seed = ((size / 2) - 1) (1023): pass (Success): bit = 2047
] 23. Set all bits
] 23. Cleared bits (114, 145] (32)
] 23. Alloc'ed all bits (145, 176] (32)
] 24. Set all bits
] 24. Cleared bits (211, 267] (57)
] 24. Alloc'ed all bits (267, 323] (57)
] 25. Set all bits: PASS (Success)
] 26. Clear bit (474, 1340]: PASS (Success)
] 27. Check free count is 866: 866: pass (Success)
] 28. Create search check free count is 866: 866: pass (Success)
] 29. Map set check with bit (2050) larger than size (2048)
] 30. Map clear check with bit (2050) larger than size (2048)
] 31. Map test check with bit (2050) larger than size (2048)
] 32. Set all bits in the map, then clear bit (1024) and set this bit once again: PASSED
] 33. Attempt to find bit when all bits are set (expected FAILED): FAILED
] 34. Clear all bits in the map.
] 35. Set a bit and check accounting.
]
] RFS Bitmap Test : size = 420 (14)
] 1. Find bit with seed > size: pass (Success)
] 2. Find bit with seed = size: pass (Success)
] 3. Find bit 0 with seed = 0: pass (Success): bit = 0
] 4. Find bit (size - 1) with seed = (size - 1) (419): pass (Success): bit = 419
] 5. Test bit 0: pass (Success)
] 6. Test bit (size - 1) (419): pass (Success)
] 7. Test bit range (1,418] all clear: pass
] 8. Set all bits: PASS (Success)
] 9. Clear bit 240: PASS (Success)
] 10. Find bit with seed = 0: pass (Success): bit = 240
] 11. Fail to find bit with seed = 0: pass (Success): bit = 0
] 12. Clear bit 0: pass (Success)
] 13. Find bit with seed = (size - 1): pass (Success): bit = 0
] 14. Clear bit (size - 1) (419): pass (Success)
] 15. Find bit with seed = 0: pass (Success): bit = 419
] 16. Clear bit 0: pass (Success)
] 17. Find bit with seed = (size / 2) (210): pass (Success): bit = 0
] 18. Clear bit (size - 1) (419): pass, (Success)
] 19. Find bit with seed = (size / 2) (210): pass (Success): bit = 419
] 20. Clear bit 0: pass (Success)
] 21. Find bit with seed = ((size / 2) - 1) (209): pass (Success): bit = 0
] 22. Clear bit (size - 1) (419): pass (Success)
] 23. Find bit with seed = ((size / 2) - 1) (209): pass (Success): bit = 419
] 23. Set all bits
] 23. Cleared bits (223, 254] (32)
] 23. Alloc'ed all bits (254, 285] (32)
] 24. Set all bits
] 24. Cleared bits (62, 118] (57)
] 24. Alloc'ed all bits (118, 174] (57)
] 25. Set all bits: PASS (Success)
] 26. Clear bit (105, 258]: PASS (Success)
] 27. Check free count is 153: 153: pass (Success)
] 28. Create search check free count is 153: 153: pass (Success)
] 29. Map set check with bit (422) larger than size (420)
] 30. Map clear check with bit (422) larger than size (420)
] 31. Map test check with bit (422) larger than size (420)
] 32. Set all bits in the map, then clear bit (210) and set this bit once again: PASSED
] 33. Attempt to find bit when all bits are set (expected FAILED): FAILED
] 34. Clear all bits in the map.
] 35. Set a bit and check accounting.
]
] Testing bitmap_map functions with zero initialized bitmap control pointer
]
] Allocate most of memory - attempt to fail while open bitmap - expect ENOMEM
] Attempt to open bitmap returned: Not enough space
] Freeing the allocated memory
]
] END of RFS Bitmap Unit Test
[ 20/677] p:0 f:0 u:0 e:0 I:0 B:0 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: fsrofs01.exe
<<skipping passes>>
[111/677] p:64 f:0 u:0 e:21 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: block11.exe
Result: timeout
Time: 0:13:57.546056 block11.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/block11.exe
]
]
=> test start: BLOCK 11
] *** BEGIN OF TEST BLOCK 11 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] *** TIMEOUT TIMEOUT
[112/677] p:64 f:0 u:0 e:21 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: block12.exe
<<skipping passes>>
[128/677] p:81 f:0 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl01.exe
Result: failed
Time: 0:00:00.507993 dl01.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/dl01.exe
]
]
=> test start: libdl (RTL) 1
] *** BEGIN OF TEST libdl (RTL) 1 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] load: /dl01-o1.o
] dlopen failed: .text.rtems_main: Unsupported relocation type 51 in non-PLT rel
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[129/677] p:81 f:0 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl02.exe
Result: failed
Time: 0:00:00.510692 dl02.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/dl02.exe
]
]
=> test start: libdl (RTL) 2
] *** BEGIN OF TEST libdl (RTL) 2 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] load: /dl02-o1.o
] dlopen failed: .text.dl_o1_callback: Unsupported relocation type 51 in non-PLT
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[130/677] p:81 f:0 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl03.exe
<<skipping passes>>
[132/677] p:84 f:0 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl05.exe
Result: failed
Time: 0:00:01.005630 dl05.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/dl05.exe
]
]
=> test start: libdl (RTL) 5
] *** BEGIN OF TEST libdl (RTL) 5 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] dlopen: .text.exception_dl: Unsupported relocation type 51 in non-PLT r
] /home/tester/rtems-cron-7/rtems/testsuites/libtests/dl05/dl-load.c: 85 handle != NULL
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[133/677] p:84 f:0 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl06.exe
Result: failed
Time: 0:00:01.053480 dl06.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/dl06.exe
]
]
=> test start: libdl (RTL) 6
] *** BEGIN OF TEST libdl (RTL) 6 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
]
] load: /dl06.rap
] dlopen failed: .text: Unsupported relocation type 279 in non-PLT relocations
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[134/677] p:84 f:2 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl07.exe
Result: failed
Time: 0:00:01.268978 dl07.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/dl07.exe
]
]
=> test start: libdl (RTL) 7
] *** BEGIN OF TEST libdl (RTL) 7 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl07/dl-load.c
] load: /dl07-o1.o
] dlopen failed: .text.rtems_main_o1: Unsupported relocation type 51 in non-PLT
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[135/677] p:84 f:2 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl08.exe
Result: failed
Time: 0:00:01.529118 dl08.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/dl08.exe
]
]
=> test start: libdl (RTL) 8
] *** BEGIN OF TEST libdl (RTL) 8 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl08/dl-load.c
] load: /dl08-o1.o
] dlopen failed: .text.rtems_main_o1: Unsupported relocation type 51 in non-PLT
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[136/677] p:85 f:2 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl09.exe
Result: failed
Time: 0:00:00.766834 dl09.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/dl09.exe
]
]
=> test start: libdl (RTL) 9
] *** BEGIN OF TEST libdl (RTL) 9 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] --------------------------------------------------
] Run: 0
] Test source (link in strstr): testsuites/libtests/dl09/dl-load.c
] Allocation size: 0
] load: /dl09-o1.o
] dlopen failed: .text.rtems_main_o1: Unsupported relocation type 51 in non-PLT
] /home/tester/rtems-cron-7/rtems/testsuites/libtests/dl09/dl-load.c: 180 o->handle != NULL
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[137/677] p:85 f:4 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl10.exe
[138/677] p:85 f:4 u:0 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl11.exe
Result: failed
Time: 0:00:00.250601 dl11.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/dl11.exe
]
]
=> test start: libdl (RTL) 11
] *** BEGIN OF TEST libdl (RTL) 11 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] load: /dl11-o1.o
] dlopen failed: .text.get_errno_val: Unsupported relocation type 29 in non-PLT
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[139/677] p:85 f:7 u:1 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dl12.exe
Result: failed
Time: 0:00:00.513014 dl12.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/dl12.exe
]
]
=> test start: libdl (RTL) 12
] *** BEGIN OF TEST libdl (RTL) 12 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] load: /dl12-inc.o
] dlopen failed: .text.dl_o1_func: Unsupported relocation type 51 in non-PLT rel
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[140/677] p:85 f:7 u:1 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: dumpbuf01.exe
<<skipping passes>>
[154/677] p:95 f:10 u:1 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: malloc04.exe
Result: failed
Time: 0:00:00.527468 malloc04.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/malloc04.exe
]
]
=> test start: MALLOC 4
] *** BEGIN OF TEST MALLOC 4 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] No sbrk() amount
] Misaligned extend
] sbrk(512)
] Not enough sbrk() space
] sbrk(1024)
] Valid heap extend
] sbrk(256)
] ../../../testsuites/libtests/malloc04/init.c: 175 sbrk_count == 0
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[155/677] p:95 f:10 u:1 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: malloctest.exe
<<skipping passes>>
[190/677] p:128 f:12 u:2 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: termios01.exe
Result: failed
Time: 0:04:43.127280 termios01.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/termios01.exe
]
]
=> test start: TERMIOS 1
] *** BEGIN OF TEST TERMIOS 1 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] Test termios_baud2index...
] termios_baud_to_index(-2) - NOT OK
] termios_baud_to_index(B0) - OK
] termios_baud_to_index(B50) - OK
] termios_baud_to_index(B75) - OK
] termios_baud_to_index(B110) - OK
] termios_baud_to_index(B134) - OK
] termios_baud_to_index(B150) - OK
] termios_baud_to_index(B200) - OK
] termios_baud_to_index(B300) - OK
] termios_baud_to_index(B600) - OK
] termios_baud_to_index(B1200) - OK
] termios_baud_to_index(B1800) - OK
] termios_baud_to_index(B2400) - OK
] termios_baud_to_index(B4800) - OK
] termios_baud_to_index(B9600) - OK
] termios_baud_to_index(B19200) - OK
] termios_baud_to_index(B38400) - OK
] termios_baud_to_index(B7200) - OK
] termios_baud_to_index(B14400) - OK
] termios_baud_to_index(B28800) - OK
] termios_baud_to_index(B57600) - OK
] termios_baud_to_index(B76800) - OK
] termios_baud_to_index(B115200) - OK
] termios_baud_to_index(B230400) - OK
] termios_baud_to_index(B460800) - OK
] termios_baud_to_index(B921600) - OK
]
] Test termios_baud2number...
] termios_baud_to_number(-2) - NOT OK
] termios_baud_to_number(B0) - OK
] termios_baud_to_number(B50) - OK
] termios_baud_to_number(B75) - OK
] termios_baud_to_number(B110) - OK
] termios_baud_to_number(B134) - OK
] termios_baud_to_number(B150) - OK
] termios_baud_to_number(B200) - OK
] termios_baud_to_number(B300) - OK
] termios_baud_to_number(B600) - OK
] termios_baud_to_number(B1200) - OK
] termios_baud_to_number(B1800) - OK
] termios_baud_to_number(B2400) - OK
] termios_baud_to_number(B4800) - OK
] termios_baud_to_number(B9600) - OK
] termios_baud_to_number(B19200) - OK
] termios_baud_to_number(B38400) - OK
] termios_baud_to_number(B7200) - OK
] termios_baud_to_number(B14400) - OK
] termios_baud_to_number(B28800) - OK
] termios_baud_to_number(B57600) - OK
] termios_baud_to_number(B76800) - OK
] termios_baud_to_number(B115200) - OK
] termios_baud_to_number(B230400) - OK
] termios_baud_to_number(B460800) - OK
] termios_baud_to_number(B921600) - OK
]
] Test termios_number_to_baud...
] termios_number_to_baud(-2) - NOT OK
] termios_number_to_baud(B0) - OK
] termios_number_to_baud(B50) - OK
] termios_number_to_baud(B75) - OK
] termios_number_to_baud(B110) - OK
] termios_number_to_baud(B134) - OK
] termios_number_to_baud(B150) - OK
] termios_number_to_baud(B200) - OK
] termios_number_to_baud(B300) - OK
] termios_number_to_baud(B600) - OK
] termios_number_to_baud(B1200) - OK
] termios_number_to_baud(B1800) - OK
] termios_number_to_baud(B2400) - OK
] termios_number_to_baud(B4800) - OK
] termios_number_to_baud(B9600) - OK
] termios_number_to_baud(B19200) - OK
] termios_number_to_baud(B38400) - OK
] termios_number_to_baud(B7200) - OK
] termios_number_to_baud(B14400) - OK
] termios_number_to_baud(B28800) - OK
] termios_number_to_baud(B57600) - OK
] termios_number_to_baud(B76800) - OK
] termios_number_to_baud(B115200) - OK
] termios_number_to_baud(B230400) - OK
] termios_number_to_baud(B460800) - OK
] termios_number_to_baud(B921600) - OK
]
] Init - rtems_io_register_driver - Termios Test Driver - OK
] Termios_test_driver - rtems_io_register /dev/test - OK
] Init - Major slot returned = 1
] Init - open - /dev/test - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] tcsetattr - invalid operation - EINVAL
] cfmakeraw - OK
] cfmakesane - OK
]
] tcsetattr - drain - OK
] set_attributes - B0 5-NONE-1
] Test termios setting device baud rate...
] tcsetattr(TCSANOW, B0) - OK
] set_attributes - B0 5-NONE-1
] tcsetattr(TCSADRAIN, B0) - OK
] set_attributes - B0 5-NONE-1
] tcsetattr(TCSAFLUSH, B0) - OK
] set_attributes - B0 5-NONE-1
] tcsetattr(TCSANOW, B50) - OK
] set_attributes - B50 5-NONE-1
] tcsetattr(TCSADRAIN, B50) - OK
] set_attributes - B50 5-NONE-1
] tcsetattr(TCSAFLUSH, B50) - OK
] set_attributes - B50 5-NONE-1
] tcsetattr(TCSANOW, B75) - OK
] set_attributes - B75 5-NONE-1
] tcsetattr(TCSADRAIN, B75) - OK
] set_attributes - B75 5-NONE-1
] tcsetattr(TCSAFLUSH, B75) - OK
] set_attributes - B75 5-NONE-1
] tcsetattr(TCSANOW, B110) - OK
] set_attributes - B110 5-NONE-1
] tcsetattr(TCSADRAIN, B110) - OK
] set_attributes - B110 5-NONE-1
] tcsetattr(TCSAFLUSH, B110) - OK
] set_attributes - B110 5-NONE-1
] tcsetattr(TCSANOW, B134) - OK
] set_attributes - B134 5-NONE-1
] tcsetattr(TCSADRAIN, B134) - OK
] set_attributes - B134 5-NONE-1
] tcsetattr(TCSAFLUSH, B134) - OK
] set_attributes - B134 5-NONE-1
] tcsetattr(TCSANOW, B150) - OK
] set_attributes - B150 5-NONE-1
] tcsetattr(TCSADRAIN, B150) - OK
] set_attributes - B150 5-NONE-1
] tcsetattr(TCSAFLUSH, B150) - OK
] set_attributes - B150 5-NONE-1
] tcsetattr(TCSANOW, B200) - OK
] set_attributes - B200 5-NONE-1
] tcsetattr(TCSADRAIN, B200) - OK
] set_attributes - B200 5-NONE-1
] tcsetattr(TCSAFLUSH, B200) - OK
] set_attributes - B200 5-NONE-1
] tcsetattr(TCSANOW, B300) - OK
] set_attributes - B300 5-NONE-1
] tcsetattr(TCSADRAIN, B300) - OK
] set_attributes - B300 5-NONE-1
] tcsetattr(TCSAFLUSH, B300) - OK
] set_attributes - B300 5-NONE-1
] tcsetattr(TCSANOW, B600) - OK
] set_attributes - B600 5-NONE-1
] tcsetattr(TCSADRAIN, B600) - OK
] set_attributes - B600 5-NONE-1
] tcsetattr(TCSAFLUSH, B600) - OK
] set_attributes - B600 5-NONE-1
] tcsetattr(TCSANOW, B1200) - OK
] set_attributes - B1200 5-NONE-1
] tcsetattr(TCSADRAIN, B1200) - OK
] set_attributes - B1200 5-NONE-1
] tcsetattr(TCSAFLUSH, B1200) - OK
] set_attributes - B1200 5-NONE-1
] tcsetattr(TCSANOW, B1800) - OK
] set_attributes - B1800 5-NONE-1
] tcsetattr(TCSADRAIN, B1800) - OK
] set_attributes - B1800 5-NONE-1
] tcsetattr(TCSAFLUSH, B1800) - OK
] set_attributes - B1800 5-NONE-1
] tcsetattr(TCSANOW, B2400) - OK
] set_attributes - B2400 5-NONE-1
] tcsetattr(TCSADRAIN, B2400) - OK
] set_attributes - B2400 5-NONE-1
] tcsetattr(TCSAFLUSH, B2400) - OK
] set_attributes - B2400 5-NONE-1
] tcsetattr(TCSANOW, B4800) - OK
] set_attributes - B4800 5-NONE-1
] tcsetattr(TCSADRAIN, B4800) - OK
] set_attributes - B4800 5-NONE-1
] tcsetattr(TCSAFLUSH, B4800) - OK
] set_attributes - B4800 5-NONE-1
] tcsetattr(TCSANOW, B9600) - OK
] set_attributes - B9600 5-NONE-1
] tcsetattr(TCSADRAIN, B9600) - OK
] set_attributes - B9600 5-NONE-1
] tcsetattr(TCSAFLUSH, B9600) - OK
] set_attributes - B9600 5-NONE-1
] tcsetattr(TCSANOW, B19200) - OK
] set_attributes - B19200 5-NONE-1
] tcsetattr(TCSADRAIN, B19200) - OK
] set_attributes - B19200 5-NONE-1
] tcsetattr(TCSAFLUSH, B19200) - OK
] set_attributes - B19200 5-NONE-1
] tcsetattr(TCSANOW, B38400) - OK
] set_attributes - B38400 5-NONE-1
] tcsetattr(TCSADRAIN, B38400) - OK
] set_attributes - B38400 5-NONE-1
] tcsetattr(TCSAFLUSH, B38400) - OK
] set_attributes - B38400 5-NONE-1
] tcsetattr(TCSANOW, B7200) - OK
] set_attributes - B7200 5-NONE-1
] tcsetattr(TCSADRAIN, B7200) - OK
] set_attributes - B7200 5-NONE-1
] tcsetattr(TCSAFLUSH, B7200) - OK
] set_attributes - B7200 5-NONE-1
] tcsetattr(TCSANOW, B14400) - OK
] set_attributes - B14400 5-NONE-1
] tcsetattr(TCSADRAIN, B14400) - OK
] set_attributes - B14400 5-NONE-1
] tcsetattr(TCSAFLUSH, B14400) - OK
] set_attributes - B14400 5-NONE-1
] tcsetattr(TCSANOW, B28800) - OK
] set_attributes - B28800 5-NONE-1
] tcsetattr(TCSADRAIN, B28800) - OK
] set_attributes - B28800 5-NONE-1
] tcsetattr(TCSAFLUSH, B28800) - OK
] set_attributes - B28800 5-NONE-1
] tcsetattr(TCSANOW, B57600) - OK
] set_attributes - B57600 5-NONE-1
] tcsetattr(TCSADRAIN, B57600) - OK
] set_attributes - B57600 5-NONE-1
] tcsetattr(TCSAFLUSH, B57600) - OK
] set_attributes - B57600 5-NONE-1
] tcsetattr(TCSANOW, B76800) - OK
] set_attributes - B76800 5-NONE-1
] tcsetattr(TCSADRAIN, B76800) - OK
] set_attributes - B76800 5-NONE-1
] tcsetattr(TCSAFLUSH, B76800) - OK
] set_attributes - B76800 5-NONE-1
] tcsetattr(TCSANOW, B115200) - OK
] set_attributes - B115200 5-NONE-1
] tcsetattr(TCSADRAIN, B115200) - OK
] set_attributes - B115200 5-NONE-1
] tcsetattr(TCSAFLUSH, B115200) - OK
] set_attributes - B115200 5-NONE-1
] tcsetattr(TCSANOW, B230400) - OK
] set_attributes - B230400 5-NONE-1
] tcsetattr(TCSADRAIN, B230400) - OK
] set_attributes - B230400 5-NONE-1
] tcsetattr(TCSAFLUSH, B230400) - OK
] set_attributes - B230400 5-NONE-1
] tcsetattr(TCSANOW, B460800) - OK
] set_attributes - B460800 5-NONE-1
] tcsetattr(TCSADRAIN, B460800) - OK
] set_attributes - B460800 5-NONE-1
] tcsetattr(TCSAFLUSH, B460800) - OK
] set_attributes - B460800 5-NONE-1
] tcsetattr(TCSANOW, B921600) - OK
] set_attributes - B921600 5-NONE-1
] tcsetattr(TCSADRAIN, B921600) - OK
] set_attributes - B921600 5-NONE-1
] tcsetattr(TCSAFLUSH, B921600) - OK
] set_attributes - B921600 5-NONE-1
] Init - close - /dev/test - OK
]
] Init - open - /dev/test - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
]
] Test termios setting device character size ...
] tcsetattr(TCSANOW, CS5) - OK
] set_attributes - B38400 5-NONE-1
] tcsetattr(TCSADRAIN, CS5) - OK
] set_attributes - B38400 5-NONE-1
] tcsetattr(TCSAFLUSH, CS5) - OK
] set_attributes - B38400 5-NONE-1
] tcsetattr(TCSASOFT, CS5) - OK
] set_attributes - B38400 5-NONE-1
] tcsetattr(TCSANOW, CS6) - OK
] set_attributes - B38400 6-NONE-1
] tcsetattr(TCSADRAIN, CS6) - OK
] set_attributes - B38400 6-NONE-1
] tcsetattr(TCSAFLUSH, CS6) - OK
] set_attributes - B38400 6-NONE-1
] tcsetattr(TCSASOFT, CS6) - OK
] set_attributes - B38400 6-NONE-1
] tcsetattr(TCSANOW, CS7) - OK
] set_attributes - B38400 7-NONE-1
] tcsetattr(TCSADRAIN, CS7) - OK
] set_attributes - B38400 7-NONE-1
] tcsetattr(TCSAFLUSH, CS7) - OK
] set_attributes - B38400 7-NONE-1
] tcsetattr(TCSASOFT, CS7) - OK
] set_attributes - B38400 7-NONE-1
] tcsetattr(TCSANOW, CS8) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSADRAIN, CS8) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSAFLUSH, CS8) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSASOFT, CS8) - OK
] set_attributes - B38400 8-NONE-1
] Init - close - /dev/test - OK
]
] Init - open - /dev/test - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
]
] Test termios setting device parity ...
] tcsetattr(TCSANOW, none) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSADRAIN, none) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSAFLUSH, none) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSASOFT, none) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSANOW, even) - OK
] set_attributes - B38400 8-ODD-1
] tcsetattr(TCSADRAIN, even) - OK
] set_attributes - B38400 8-ODD-1
] tcsetattr(TCSAFLUSH, even) - OK
] set_attributes - B38400 8-ODD-1
] tcsetattr(TCSASOFT, even) - OK
] set_attributes - B38400 8-ODD-1
] tcsetattr(TCSANOW, odd) - OK
] set_attributes - B38400 8-EVEN-1
] tcsetattr(TCSADRAIN, odd) - OK
] set_attributes - B38400 8-EVEN-1
] tcsetattr(TCSAFLUSH, odd) - OK
] set_attributes - B38400 8-EVEN-1
] tcsetattr(TCSASOFT, odd) - OK
] set_attributes - B38400 8-EVEN-1
] Init - close - /dev/test - OK
]
] Init - open - /dev/test - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
]
] Test termios setting device character size ...
] tcsetattr(TCSANOW, 1 bit) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSADRAIN, 1 bits) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSAFLUSH, 1 bits) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSASOFT, 1 bits) - OK
] set_attributes - B38400 8-NONE-1
] tcsetattr(TCSANOW, 2 bits) - OK
] set_attributes - B38400 8-NONE-2
] tcsetattr(TCSADRAIN, 2 bits) - OK
] set_attributes - B38400 8-NONE-2
] tcsetattr(TCSAFLUSH, 2 bits) - OK
] set_attributes - B38400 8-NONE-2
] tcsetattr(TCSASOFT, 2 bits) - OK
] set_attributes - B38400 8-NONE-2
] cfsetospeed(BAD BAUD) - EINVAL
] cfsetospeed(B0) - OK
] cfgetospeed(B0) - OK
] cfsetospeed(B50) - OK
] cfgetospeed(B50) - OK
] cfsetospeed(B75) - OK
] cfgetospeed(B75) - OK
] cfsetospeed(B110) - OK
] cfgetospeed(B110) - OK
] cfsetospeed(B134) - OK
] cfgetospeed(B134) - OK
] cfsetospeed(B150) - OK
] cfgetospeed(B150) - OK
] cfsetospeed(B200) - OK
] cfgetospeed(B200) - OK
] cfsetospeed(B300) - OK
] cfgetospeed(B300) - OK
] cfsetospeed(B600) - OK
] cfgetospeed(B600) - OK
] cfsetospeed(B1200) - OK
] cfgetospeed(B1200) - OK
] cfsetospeed(B1800) - OK
] cfgetospeed(B1800) - OK
] cfsetospeed(B2400) - OK
] cfgetospeed(B2400) - OK
] cfsetospeed(B4800) - OK
] cfgetospeed(B4800) - OK
] cfsetospeed(B9600) - OK
] cfgetospeed(B9600) - OK
] cfsetospeed(B19200) - OK
] cfgetospeed(B19200) - OK
] cfsetospeed(B38400) - OK
] cfgetospeed(B38400) - OK
] cfsetospeed(B7200) - OK
] cfgetospeed(B7200) - OK
] cfsetospeed(B14400) - OK
] cfgetospeed(B14400) - OK
] cfsetospeed(B28800) - OK
] cfgetospeed(B28800) - OK
] cfsetospeed(B57600) - OK
] cfgetospeed(B57600) - OK
] cfsetospeed(B76800) - OK
] cfgetospeed(B76800) - OK
] cfsetospeed(B115200) - OK
] cfgetospeed(B115200) - OK
] cfsetospeed(B230400) - OK
] cfgetospeed(B230400) - OK
] cfsetospeed(B460800) - OK
] cfgetospeed(B460800) - OK
] cfsetospeed(B921600) - OK
] cfgetospeed(B921600) - OK
] cfsetispeed(BAD BAUD) - EINVAL
] cfsetispeed(B0) - OK
] cfgetispeed(B0) - OK
] cfsetispeed(B50) - OK
] cfgetispeed(B50) - OK
] cfsetispeed(B75) - OK
] cfgetispeed(B75) - OK
] cfsetispeed(B110) - OK
] cfgetispeed(B110) - OK
] cfsetispeed(B134) - OK
] cfgetispeed(B134) - OK
] cfsetispeed(B150) - OK
] cfgetispeed(B150) - OK
] cfsetispeed(B200) - OK
] cfgetispeed(B200) - OK
] cfsetispeed(B300) - OK
] cfgetispeed(B300) - OK
] cfsetispeed(B600) - OK
] cfgetispeed(B600) - OK
] cfsetispeed(B1200) - OK
] cfgetispeed(B1200) - OK
] cfsetispeed(B1800) - OK
] cfgetispeed(B1800) - OK
] cfsetispeed(B2400) - OK
] cfgetispeed(B2400) - OK
] cfsetispeed(B4800) - OK
] cfgetispeed(B4800) - OK
] cfsetispeed(B9600) - OK
] cfgetispeed(B9600) - OK
] cfsetispeed(B19200) - OK
] cfgetispeed(B19200) - OK
] cfsetispeed(B38400) - OK
] cfgetispeed(B38400) - OK
] cfsetispeed(B7200) - OK
] cfgetispeed(B7200) - OK
] cfsetispeed(B14400) - OK
] cfgetispeed(B14400) - OK
] cfsetispeed(B28800) - OK
] cfgetispeed(B28800) - OK
] cfsetispeed(B57600) - OK
] cfgetispeed(B57600) - OK
] cfsetispeed(B76800) - OK
] cfgetispeed(B76800) - OK
] cfsetispeed(B115200) - OK
] cfgetispeed(B115200) - OK
] cfsetispeed(B230400) - OK
] cfgetispeed(B230400) - OK
] cfsetispeed(B460800) - OK
] cfgetispeed(B460800) - OK
] cfsetispeed(B921600) - OK
] cfgetispeed(B921600) - OK
] cfsetspeed(BAD BAUD) - EINVAL
] cfsetspeed(B0) - OK
] cfgetspeed(B0) - checking both inspeed and outspeed - OK
] cfsetspeed(B50) - OK
] cfgetspeed(B50) - checking both inspeed and outspeed - OK
] cfsetspeed(B75) - OK
] cfgetspeed(B75) - checking both inspeed and outspeed - OK
] cfsetspeed(B110) - OK
] cfgetspeed(B110) - checking both inspeed and outspeed - OK
] cfsetspeed(B134) - OK
] cfgetspeed(B134) - checking both inspeed and outspeed - OK
] cfsetspeed(B150) - OK
] cfgetspeed(B150) - checking both inspeed and outspeed - OK
] cfsetspeed(B200) - OK
] cfgetspeed(B200) - checking both inspeed and outspeed - OK
] cfsetspeed(B300) - OK
] cfgetspeed(B300) - checking both inspeed and outspeed - OK
] cfsetspeed(B600) - OK
] cfgetspeed(B600) - checking both inspeed and outspeed - OK
] cfsetspeed(B1200) - OK
] cfgetspeed(B1200) - checking both inspeed and outspeed - OK
] cfsetspeed(B1800) - OK
] cfgetspeed(B1800) - checking both inspeed and outspeed - OK
] cfsetspeed(B2400) - OK
] cfgetspeed(B2400) - checking both inspeed and outspeed - OK
] cfsetspeed(B4800) - OK
] cfgetspeed(B4800) - checking both inspeed and outspeed - OK
] cfsetspeed(B9600) - OK
] cfgetspeed(B9600) - checking both inspeed and outspeed - OK
] cfsetspeed(B19200) - OK
] cfgetspeed(B19200) - checking both inspeed and outspeed - OK
] cfsetspeed(B38400) - OK
] cfgetspeed(B38400) - checking both inspeed and outspeed - OK
] cfsetspeed(B7200) - OK
] cfgetspeed(B7200) - checking both inspeed and outspeed - OK
] cfsetspeed(B14400) - OK
] cfgetspeed(B14400) - checking both inspeed and outspeed - OK
] cfsetspeed(B28800) - OK
] cfgetspeed(B28800) - checking both inspeed and outspeed - OK
] cfsetspeed(B57600) - OK
] cfgetspeed(B57600) - checking both inspeed and outspeed - OK
] cfsetspeed(B76800) - OK
] cfgetspeed(B76800) - checking both inspeed and outspeed - OK
] cfsetspeed(B115200) - OK
] cfgetspeed(B115200) - checking both inspeed and outspeed - OK
] cfsetspeed(B230400) - OK
] cfgetspeed(B230400) - checking both inspeed and outspeed - OK
] cfsetspeed(B460800) - OK
] cfgetspeed(B460800) - checking both inspeed and outspeed - OK
] cfsetspeed(B921600) - OK
] cfgetspeed(B921600) - checking both inspeed and outspeed - OK
] Init - close - /dev/test - OK
] Multiple open of the device
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
] Termios_test_driver - rtems_set_initial_baud - bad baud - OK
] Termios_test_driver - rtems_set_initial_baud - 38400 - OK
]
[191/677] p:128 f:12 u:2 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: termios02.exe
<<skipping passes>>
[203/677] p:140 f:12 u:3 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: ttest02.exe
Result: failed
Time: 0:02:10.164941 ttest02.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/libtests/ttest02.exe
]
]
=> test start: TTEST 2
] *** BEGIN OF TEST TTEST 2 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] A:TTEST 2
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] S:Version:7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] S:BSP:rv64imafd
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:eD8k6zRjJSHgnJm69OsggYd6yYDolNXSzMq7m0-XHaA=
] S:RTEMS_DEBUG:1
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:TestThreadSwitch
] F:33:0:UI1:init.c:272:4316463607 > 4316463607
] F:41:0:UI1:init.c:272:4325053541 > 4325053541
] F:49:0:UI1:init.c:272:4333643476 > 4333643476
] F:57:0:UI1:init.c:272:4342233411 > 4342233411
] E:TestThreadSwitch:N:62:F:4:D:0.012450
] B:TestInterruptTimeout
] E:TestInterruptTimeout:N:1:F:0:D:0.037745
] B:TestInterruptFatal
] E:TestInterruptFatal:N:1:F:0:D:0.000005
] B:TestInterruptDone
] E:TestInterruptDone:N:10:F:0:D:9.461370
] B:TestInterruptBlocked
] E:TestInterruptBlocked:N:3:F:0:D:0.001430
] Z:TTEST 2:C:5:N:77:F:4:D:9.514575
] Y:ReportHash:SHA256:JH6EwzRbTKbd7Ktmm8JiOq3b3QGgeUBVP9_0sbkques=
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[204/677] p:142 f:12 u:3 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: tztest.exe
<<skipping passes>>
[215/677] p:150 f:12 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: psx09.exe
Result: failed
Time: 0:00:28.050788 psx09.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/psxtests/psx09.exe
]
]
=> test start: PSX 9
] *** BEGIN OF TEST PSX 9 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] Init's ID is 0x0b010001
] Init: pthread_getschedparam - SUCCESSFUL
] Init: Fri May 24 11:05:00 1996 - current priority = 2
] Init: pthread_setschedparam - SUCCESSFUL (sporadic server)
] Init: Fri May 24 11:05:00 1996 - new priority = 253
] Init: Fri May 24 11:05:00 1996 - new priority = 253
] Init: Fri May 24 11:05:00 1996 - new priority = 252
] Init: Fri May 24 11:05:01 1996 - new priority = 253
] Init: Fri May 24 11:05:02 1996 - new priority = 252
]
] Init: pthread_setschedparam - SUCCESSFUL (sporadic server)
] Init: Initializing mutex attributes for priority ceiling
] Init: Creating a mutex
] Init: Fri May 24 11:05:02 1996 - new priority = 253
] Init: Go into low priority and lock/unlock ceiling mutex
] Init: Go into high priority and lock/unlock ceiling mutex
] Init: Go into low priority and change scheduler parameters
] Init: Go into low priority and set POSIX priority
] Init: Go into low priority and set RTEMS priority
] Init: Go into low priority and set scheduler
] ../../../testsuites/psxtests/psx09/init.c: 342 sc == RTEMS_SUCCESSFUL
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0b010001
] executing thread name:
[216/677] p:152 f:12 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: psx10.exe
<<skipping passes>>
[265/677] p:199 f:13 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: psximfs02.exe
Result: failed
Time: 0:02:36.830185 psximfs02.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/psxtests/psximfs02.exe
]
]
=> test start: PSXIMFS 2
] *** BEGIN OF TEST PSXIMFS 2 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] Creating directory /dir00
] Creating directory /dir00/dir01
] Changing directory to /dir00
] Creating link dir01-link0 for dir01
]
] Creating link dir01-link0001 for dir01-link0000
] Link creation failed
] Creating a regular node /node, RDONLY
] Creating link /node-link for /node
] Opening /node-link in WRONLY mode -- expect EACCES
] Creating a symlink /node-slink for /node
] Opening /node-slink in WRONLY mode -- expect EACCES
] Allocate most of heap with a little bit left
] Create an empty file.
] Then increase it's size to more than remaining space
] Clean up again
] Allocate most of heap
] Attempt to mount a fs at dir01 -- expect ENOMEMFreeing allocated memory
] Changing directory to /
] Allocate most of heap
] Attempt to create /node-link-2 for /node -- expect ENOMEM
] Attempt to create /node-slink-2 for /node -- expect ENOMEM
] Freeing allocated memory
[266/677] p:201 f:13 u:4 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: psxintrcritical01.exe
<<skipping passes>>
[539/677] p:468 f:16 u:6 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: spintrcritical20.exe
Result: failed
Time: 0:01:41.078943 spintrcritical20.exe
=> exe: spike --isa=RV64IMAFD b-rv64imafd/riscv/rv64imafd/testsuites/sptests/spintrcritical20.exe
]
]
=> test start: SPINTRCRITICAL 20
] *** BEGIN OF TEST SPINTRCRITICAL 20 ***
] *** TEST VERSION: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] *** TEST STATE: EXPECTED_PASS
] *** TEST BUILD: RTEMS_DEBUG RTEMS_POSIX_API
] *** TEST TOOLS: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] A:SPINTRCRITICAL 20
] S:Platform:RTEMS
] S:Compiler:13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] S:Version:7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] S:BSP:rv64imafd
] S:BuildLabel:DEFAULT
] S:TargetHash:SHA256:eD8k6zRjJSHgnJm69OsggYd6yYDolNXSzMq7m0-XHaA=
] S:RTEMS_DEBUG:1
] S:RTEMS_MULTIPROCESSING:0
] S:RTEMS_POSIX_API:1
] S:RTEMS_PROFILING:0
] S:RTEMS_SMP:0
] B:SemaphoreObtainTimeoutInterrupt
] F:3:0:UI1:init.c:192:8 == 4
] F:4:0:UI1:init.c:194
] E:SemaphoreObtainTimeoutInterrupt:N:9:F:2:D:10.067595
] Z:SPINTRCRITICAL 20:C:1:N:9:F:2:D:10.068040
] Y:ReportHash:SHA256:tpI3PQuhgDt9cmGCqM96cVRAjhhKX0dT6T8O1UFJ19c=
]
] [ RTEMS shutdown ]
] RTEMS version: 7.0.0.69b72bb9df88b876c84d624228f2bc12fd76049c
] RTEMS tools: 13.3.0 20240521 (RTEMS 7, RSB 8084e3563ebc745f14c425fdd0d0b0deb8380995, Newlib 1b3dcfd)
] executing thread ID: 0x0a010001
] executing thread name: UI1
[540/677] p:469 f:16 u:6 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: spintrcritical21.exe
<<skipping passes>>
[677/677] p:604 f:18 u:6 e:22 I:0 B:3 t:0 L:0 i:0 W:0 | riscv64/rv64imafd: ts-validation-tls-1.exe
Passed: 625
Failed: 19
User Input: 6
Expected Fail: 22
Indeterminate: 0
Benchmark: 3
Timeout: 2
Test too long: 0
Invalid: 0
Wrong Version: 0
Wrong Build: 0
Wrong Tools: 0
Wrong Header: 0
------------------
Total: 677
Failures:
dl01.exe
dl02.exe
dl05.exe
dl06.exe
dl07.exe
dl08.exe
dl09.exe
dl11.exe
dl12.exe
fsrfsbitmap01.exe
malloc04.exe
psx09.exe
psximfs02.exe
spintrcritical20.exe
termios01.exe
ttest02.exe
dl04.exe
regulator01.exe
ts-validation-intr.exe
User Input:
capture.exe
dl10.exe
fileio.exe
monitor.exe
termios.exe
top.exe
Expected Fail:
imfs_fsrenameexisting.exe
imfs_fsrenamepermexisting.exe
imfs_fssymlink.exe
jffs2_fsrenameexisting.exe
jffs2_fsrenamemaxlinks.exe
jffs2_fsrenamepermexisting.exe
jffs2_fssymlink.exe
jffs2nand_fsrenameexisting.exe
jffs2nand_fsrenamemaxlinks.exe
jffs2nand_fsrenamepermexisting.exe
jffs2nand_fssymlink.exe
mdosfs_fsrenameexisting.exe
mdosfs_fsrenamemaxlinks.exe
mimfs_fsrenameexisting.exe
mimfs_fsrenamemaxlinks.exe
mimfs_fsrenamepermexisting.exe
mimfs_fssymlink.exe
mrfs_fsrenameexisting.exe
mrfs_fsrenamelongname.exe
mrfs_fsrenamemaxlinks.exe
mrfs_fsrenamepermexisting.exe
mrfs_fssymlink.exe
Benchmark:
dhrystone.exe
linpack.exe
whetstone.exe
Timeouts:
block11.exe
fsimfsgeneric01.exe
Average test time: 0:00:01.439355
Testing time : 0:16:14.443031
More information about the build
mailing list