[rtems-bsp-builder] 2025-10-13 21:27:28: Profile(s): everything

[OAR Tester for Rocky Linux 9]

RTEMS Tools Project - RTEMS Kernel BSP Builder, 7.0.not_released
================================================================

Host: #1 SMP PREEMPT_DYNAMIC Fri Oct 3 15:42:32 UTC 2025

command: /home/tester/rtems-cron-7/tools/7/bin/rtems-bsp-builder\
         --rtems=/home/tester/rtems-cron-7/rtems --build-\
         path=/home/tester/rtems-cron-7/build --prefix=/home/tester/rtems-\
         cron-7/tools/7/bsps --log=/home/tester/rtems-cron-7/bsp-\
         builder.log --warnings-report=warnings.log --mail --use-gitconfig\
         --profiles=everything

Total Time            : 4:32:32.931653 for 1224 completed job(s)
Average BSP Build Time: 0:00:13.360238

Builds
======
 debug
 no-posix
 posix
 posix-debug
 posix-profiling
 profiling
 smp
 smp-debug

Failures Report
===============
   1 debug powerpc/virtex5 build:
      configure: /home/tester/rtems-cron-7/rtems/waf configure\
      --prefix=/home/tester/rtems-cron-7/tools/7/bsps\
      --top=/home/tester/rtems-cron-7/rtems --rtems-config=config-powerpc-\
      virtex5-debug.ini
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:4: error:
            'rtems_irq_connect_data' {aka 'struct
            __rtems_irq_connect_data__'} has no member named
            'next_handler'
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:19: error:
            excess elements in struct initializer [-Werror]

   2 no-posix powerpc/virtex5 build:
      configure: /home/tester/rtems-cron-7/rtems/waf configure\
      --prefix=/home/tester/rtems-cron-7/tools/7/bsps\
      --top=/home/tester/rtems-cron-7/rtems --rtems-config=config-powerpc-\
      virtex5-no-posix.ini
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:4: error:
            'rtems_irq_connect_data' {aka 'struct
            __rtems_irq_connect_data__'} has no member named
            'next_handler'
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:19: error:
            excess elements in struct initializer [-Werror]

   3 posix powerpc/virtex5 build:
      configure: /home/tester/rtems-cron-7/rtems/waf configure\
      --prefix=/home/tester/rtems-cron-7/tools/7/bsps\
      --top=/home/tester/rtems-cron-7/rtems --rtems-config=config-powerpc-\
      virtex5-posix.ini
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:4: error:
            'rtems_irq_connect_data' {aka 'struct
            __rtems_irq_connect_data__'} has no member named
            'next_handler'
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:19: error:
            excess elements in struct initializer [-Werror]

   4 posix-debug powerpc/virtex5 build:
      configure: /home/tester/rtems-cron-7/rtems/waf configure\
      --prefix=/home/tester/rtems-cron-7/tools/7/bsps\
      --top=/home/tester/rtems-cron-7/rtems --rtems-config=config-powerpc-\
      virtex5-posix-debug.ini
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:4: error:
            'rtems_irq_connect_data' {aka 'struct
            __rtems_irq_connect_data__'} has no member named
            'next_handler'
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:19: error:
            excess elements in struct initializer [-Werror]

   5 posix-profiling powerpc/virtex5 build:
      configure: /home/tester/rtems-cron-7/rtems/waf configure\
      --prefix=/home/tester/rtems-cron-7/tools/7/bsps\
      --top=/home/tester/rtems-cron-7/rtems --rtems-config=config-powerpc-\
      virtex5-posix-profiling.ini
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:4: error:
            'rtems_irq_connect_data' {aka 'struct
            __rtems_irq_connect_data__'} has no member named
            'next_handler'
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:19: error:
            excess elements in struct initializer [-Werror]

   6 profiling powerpc/virtex5 build:
      configure: /home/tester/rtems-cron-7/rtems/waf configure\
      --prefix=/home/tester/rtems-cron-7/tools/7/bsps\
      --top=/home/tester/rtems-cron-7/rtems --rtems-config=config-powerpc-\
      virtex5-profiling.ini
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:4: error:
            'rtems_irq_connect_data' {aka 'struct
            __rtems_irq_connect_data__'} has no member named
            'next_handler'
     error: home/tester/bsps/powerpc/shared/clock/p_clock.c:32:19: error:
            excess elements in struct initializer [-Werror]


Warnings Report
===============
 No warnings