Build Linux: FAILED 7/rtems-arm on x86_64-linux-gnu (arm-rtems7-gcc-15.2.0-newlib-7d4336cf-x86_64-linux-gnu-1)
OAR Tester for Rocky Linux 10
rtems-tester at oarcorp.com
Thu Aug 20 17:32:12 UTC 2026
RTEMS Source Builder - Set Builder, 7 (5fc5d42b696e)
Host: Linux-6.12.0-211.16.1.el10_2.0.1.x86_64-x86_64-with-glibc2.39
Linux rocky10 6.12.0-211.16.1.el10_2.0.1.x86_64 #1 SMP PREEMPT_DYNAMIC
Sun May 24 12:24:17 UTC 2026 x86_64
Build Time: 0:36:02.748809
Output
======
Build Set: 7/rtems-arm
Build Set: tools/rtems-default-tools.bset
config: devel/dtc-1.7.2-1.cfg
package: dtc-1.7.2-x86_64-linux-gnu-1
building: dtc-1.7.2-x86_64-linux-gnu-1
sizes: dtc-1.7.2-x86_64-linux-gnu-1: 4.362MB (installed: 1.129MB)
cleaning: dtc-1.7.2-x86_64-linux-gnu-1
reporting: devel/dtc-1.7.2-1.cfg -> dtc-1.7.2-x86_64-linux-gnu-1.txt
reporting: devel/dtc-1.7.2-1.cfg -> dtc-1.7.2-x86_64-linux-gnu-1.xml
Build Set: devel/expat-internal.bset
config: devel/expat-2.8.1-1.cfg
package: expat-2.8.1-x86_64-linux-gnu-1
building: expat-2.8.1-x86_64-linux-gnu-1
sizes: expat-2.8.1-x86_64-linux-gnu-1: 10.862MB (installed: 0.000B)
cleaning: expat-2.8.1-x86_64-linux-gnu-1
cleaning: expat-2.8.1-x86_64-linux-gnu-1
Build Set: Time 0:00:05.388436
Build Set: devel/gmp-internal.bset
config: devel/gmp-6.3.0.cfg
package: gmp-6.3.0-x86_64-linux-gnu-1
building: gmp-6.3.0-x86_64-linux-gnu-1
sizes: gmp-6.3.0-x86_64-linux-gnu-1: 35.766MB (installed: 0.000B)
cleaning: gmp-6.3.0-x86_64-linux-gnu-1
cleaning: gmp-6.3.0-x86_64-linux-gnu-1
Build Set: Time 0:00:23.181647
Build Set: devel/mpfr-internal.bset
config: devel/mpfr-4.2.1.cfg
package: mpfr-4.2.1-x86_64-linux-gnu-1
building: mpfr-4.2.1-x86_64-linux-gnu-1
sizes: mpfr-4.2.1-x86_64-linux-gnu-1: 20.167MB (installed: 0.000B)
cleaning: mpfr-4.2.1-x86_64-linux-gnu-1
cleaning: mpfr-4.2.1-x86_64-linux-gnu-1
Build Set: Time 0:00:13.196222
Build Set: textproc/gsed-internal.bset
config: textproc/gsed.cfg
Build Set: Time 0:00:00.013182
Build Set: print/texinfo-internal.bset
config: print/texinfo.cfg
Build Set: Time 0:00:00.240772
config: tools/rtems-gdb-17.2.cfg
package: arm-rtems7-gdb-17.2-x86_64-linux-gnu-1
building: arm-rtems7-gdb-17.2-x86_64-linux-gnu-1
sizes: arm-rtems7-gdb-17.2-x86_64-linux-gnu-1: 1.129GB (installed: 178.615MB)
cleaning: arm-rtems7-gdb-17.2-x86_64-linux-gnu-1
reporting: tools/rtems-gdb-17.2.cfg -> arm-rtems7-gdb-17.2-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gdb-17.2.cfg -> arm-rtems7-gdb-17.2-x86_64-linux-gnu-1.xml
config: tools/rtems-binutils-2.47.cfg
package: arm-rtems7-binutils-2.47-x86_64-linux-gnu-1
building: arm-rtems7-binutils-2.47-x86_64-linux-gnu-1
sizes: arm-rtems7-binutils-2.47-x86_64-linux-gnu-1: 632.213MB (installed: 156.196MB)
cleaning: arm-rtems7-binutils-2.47-x86_64-linux-gnu-1
reporting: tools/rtems-binutils-2.47.cfg -> arm-rtems7-binutils-2.47-x86_64-linux-gnu-1.txt
reporting: tools/rtems-binutils-2.47.cfg -> arm-rtems7-binutils-2.47-x86_64-linux-gnu-1.xml
config: tools/rtems-gcc-15.2-newlib-head.cfg
package: arm-rtems7-gcc-15.2.0-newlib-7d4336cf-x86_64-linux-gnu-1
building: arm-rtems7-gcc-15.2.0-newlib-7d4336cf-x86_64-linux-gnu-1
sizes: arm-rtems7-gcc-15.2.0-newlib-7d4336cf-x86_64-linux-gnu-1: 9.918GB (installed: 2.514GB)
cleaning: arm-rtems7-gcc-15.2.0-newlib-7d4336cf-x86_64-linux-gnu-1
error: copying tree (3): /home/tester/rtems-cron-7/rtems-source-builder/rtems/build/tmp/arm-rtems7-gcc-15.2.0-newlib-7d4336cf-x86_64-linux-gnu-1-1001/home/tester/rtems-cron-7/tools/7/lib/gcc/arm-rtems7/15.2.0/thumb/armv6-m/libstdc++exp.a -> /home/tester/rtems-cron-7/rtems-source-builder/rtems/build/tmp/sb-1001/tools/rtems-default-tools/home/tester/rtems-cron-7/tools/7/lib/gcc/arm-rtems7/15.2.0/thumb/armv6-m/libstdc++exp.a: [Errno 28] No space left on device: '/home/tester/rtems-cron-7/rtems-source-builder/rtems/build/tmp/arm-rtems7-gcc-15.2.0-newlib-7d4336cf-x86_64-linux-gnu-1-1001/home/tester/rtems-cron-7/tools/7/lib/gcc/arm-rtems7/15.2.0/thumb/armv6-m/libstdc++exp.a' -> '/home/tester/rtems-cron-7/rtems-source-builder/rtems/build/tmp/sb-1001/tools/rtems-default-tools/home/tester/rtems-cron-7/tools/7/lib/gcc/arm-rtems7/15.2.0/thumb/armv6-m/libstdc++exp.a'
Build Set: Time 0:36:02.723122
error: copying tree (3): /home/tester/rtems-cron-7/rtems-source-builder/rtems/build/tmp/arm-rtems7-gcc-15.2.0-newlib-7d4336cf-x86_64-linux-gnu-1-1001/home/tester/rtems-cron-7/tools/7/lib/gcc/arm-rtems7/15.2.0/thumb/armv6-m/libstdc++exp.a -> /home/tester/rtems-cron-7/rtems-source-builder/rtems/build/tmp/sb-1001/tools/rtems-default-tools/home/tester/rtems-cron-7/tools/7/lib/gcc/arm-rtems7/15.2.0/thumb/armv6-m/libstdc++exp.a: [Errno 28] No space left on device: '/home/tester/rtems-cron-7/rtems-source-builder/rtems/build/tmp/arm-rtems7-gcc-15.2.0-newlib-7d4336cf-x86_64-linux-gnu-1-1001/home/tester/rtems-cron-7/tools/7/lib/gcc/arm-rtems7/15.2.0/thumb/armv6-m/libstdc++exp.a' -> '/home/tester/rtems-cron-7/rtems-source-builder/rtems/build/tmp/sb-1001/tools/rtems-default-tools/home/tester/rtems-cron-7/tools/7/lib/gcc/arm-rtems7/15.2.0/thumb/armv6-m/libstdc++exp.a'
Mailing report: build at rtems.org
Report
======
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 20 12:08:15 2026
==============================================================================
Report: devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 5fc5d42b696e8c0068d8f0fbcac0a2f3749cf0f1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.7.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.7.2-x86_64-linux-gnu-1
Config: devel/dtc-1.7.2-1.cfg
Summary:
Device Tree Compiler v1.7.2 for target arm-rtems7 on host x86_64-linux-gnu
URL:
https://www.devicetree.org/
Version:
1.7.2
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.7.2.tar.xz
sha512: MPNhEXWlwpVWKC8/KJRwGlg364aWCNideMKAr0SLvDpbbIP1HCj5kYR8DrfEKqV1mbvDFDPxs7LI0WLLIWm5Hw==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.7.2
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.7.2
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/tester/rtems-cron-7/tools/7 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.7.2
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/tester/rtems-cron-7/tools/7 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 20 12:08:15 2026
==============================================================================
Report: devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 5fc5d42b696e8c0068d8f0fbcac0a2f3749cf0f1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.7.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.7.2-x86_64-linux-gnu-1
Config: devel/dtc-1.7.2-1.cfg
Summary:
Device Tree Compiler v1.7.2 for target arm-rtems7 on host x86_64-linux-gnu
URL:
https://www.devicetree.org/
Version:
1.7.2
Release:
1
Sources: 1
1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.7.2.tar.xz
sha512: MPNhEXWlwpVWKC8/KJRwGlg364aWCNideMKAr0SLvDpbbIP1HCj5kYR8DrfEKqV1mbvDFDPxs7LI0WLLIWm5Hw==
Patches: 0
Preparation:
build_top=$(pwd)
%setup source dtc -q -n dtc-1.7.2
%setup patch dtc -p1
cd ${build_top}
Build:
build_top=$(pwd)
cd dtc-1.7.2
# Build and build flags means force build == host
# gcc is not ready to be compiled with -std=gnu99
LDFLAGS="${SB_HOST_LDFLAGS}"
LIBS="${SB_HOST_LIBS}"
CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
make PREFIX=/home/tester/rtems-cron-7/tools/7 WARNINGS=
cd ${build_top}
Install:
build_top=$(pwd)
rm -rf $SB_BUILD_ROOT
cd dtc-1.7.2
make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/tester/rtems-cron-7/tools/7 WARNINGS= install
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 20 12:12:36 2026
==============================================================================
Report: tools/rtems-gdb-17.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 5fc5d42b696e8c0068d8f0fbcac0a2f3749cf0f1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-17.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-17.2.cfg
------------------------------------------------------------------------------
Package: arm-rtems7-gdb-17.2-x86_64-linux-gnu-1
Config: tools/rtems-gdb-17.2.cfg
Summary:
GDB v17.2 for target arm-rtems7 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
17.2
Release:
1
Sources: 1
1: https://ftpmirror.gnu.org/gdb/gdb-17.2.tar.xz
sha512: d5TFoYW+ftXnrRAAxP99hJfIBCWhvBCKq4/T3Y7N3gNOKU39ZbJcaw3NjtKiQMrwcpPz5zeRts/IkNWA0K9FgQ==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
2: https://gitlab.rtems.org/-/project/26/uploads/f4a37404615b82ab9cb8400ecc64e500/0001-gdb-Add-support-for-TLS-under-RTEMSv17.1.patch
sha512: +oiBYucyDZqtMpDIx/EnuUKufW6Sp8CsvSXr2iBb6Bv3mzpAJlu+Rg72rK98AZTivkF5CCOTyYNSMBhmSmEslQ==
Preparation:
build_top=$(pwd)
gdb_source="gdb-17.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "arm-rtems7" -o "x86_64-linux-gnu" == "arm-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=arm-rtems7 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/home/tester/rtems-cron-7/tools/7 --bindir=/home/tester/rtems-cron-7/tools/7/bin --exec-prefix=/home/tester/rtems-cron-7/tools/7 --includedir=/home/tester/rtems-cron-7/tools/7/include --libdir=/home/tester/rtems-cron-7/tools/7/lib --mandir=/home/tester/rtems-cron-7/tools/7/share/man --infodir=/home/tester/rtems-cron-7/tools/7/share/info
make -j 4 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 20 12:12:36 2026
==============================================================================
Report: tools/rtems-gdb-17.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 5fc5d42b696e8c0068d8f0fbcac0a2f3749cf0f1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-gdb-17.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-gdb-17.2.cfg
------------------------------------------------------------------------------
Package: arm-rtems7-gdb-17.2-x86_64-linux-gnu-1
Config: tools/rtems-gdb-17.2.cfg
Summary:
GDB v17.2 for target arm-rtems7 on host x86_64-linux-gnu
URL:
http://www.gnu.org/software/gdb/
Version:
17.2
Release:
1
Sources: 1
1: https://ftpmirror.gnu.org/gdb/gdb-17.2.tar.xz
sha512: d5TFoYW+ftXnrRAAxP99hJfIBCWhvBCKq4/T3Y7N3gNOKU39ZbJcaw3NjtKiQMrwcpPz5zeRts/IkNWA0K9FgQ==
Patches: 1
1: https://sourceware.org/bugzilla/attachment.cgi?id=14783&format=raw
No checksum
2: https://gitlab.rtems.org/-/project/26/uploads/f4a37404615b82ab9cb8400ecc64e500/0001-gdb-Add-support-for-TLS-under-RTEMSv17.1.patch
sha512: +oiBYucyDZqtMpDIx/EnuUKufW6Sp8CsvSXr2iBb6Bv3mzpAJlu+Rg72rK98AZTivkF5CCOTyYNSMBhmSmEslQ==
Preparation:
build_top=$(pwd)
gdb_source="gdb-17.2"
source_dir_gdb=${gdb_source}
%setup source gdb -q -n ${gdb_source}
%setup patch gdb -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "arm-rtems7" -o "x86_64-linux-gnu" == "arm-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
GDB_LIBS_STATIC="-lexpat"
else
GDB_LIBS_STATIC="-lexpat"
GDB_LIBS="-Xlinker -Bstatic ${LIBS_STATIC} -Xlinker -Bdynamic"
fi
LIBS_STATIC=${GDB_LIBS_STATIC} LIBS=${GDB_LIBS} ../${source_dir_gdb}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=arm-rtems7 --verbose --disable-nls --disable-gas --disable-binutils --disable-ld --disable-gold --disable-gprof --without-included-gettext --disable-win32-registry --disable-werror --enable-sim --without-zlib --with-expat --with-guile=no --with-python=/usr/bin/python3 --prefix=/home/tester/rtems-cron-7/tools/7 --bindir=/home/tester/rtems-cron-7/tools/7/bin --exec-prefix=/home/tester/rtems-cron-7/tools/7 --includedir=/home/tester/rtems-cron-7/tools/7/include --libdir=/home/tester/rtems-cron-7/tools/7/lib --mandir=/home/tester/rtems-cron-7/tools/7/share/man --infodir=/home/tester/rtems-cron-7/tools/7/share/info
make -j 4 all V=1
cd ${build_top}
Install:
build_top=$(pwd)
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/dir
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 20 12:13:25 2026
==============================================================================
Report: tools/rtems-binutils-2.47.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 5fc5d42b696e8c0068d8f0fbcac0a2f3749cf0f1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.47.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.47.cfg
------------------------------------------------------------------------------
Package: arm-rtems7-binutils-2.47-x86_64-linux-gnu-1
Config: tools/rtems-binutils-2.47.cfg
Summary:
Binutils v2.47 for target arm-rtems7 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
2.47
Release:
1
Sources: 1
1: https://ftpmirror.gnu.org/binutils/binutils-2.47.tar.bz2
sha512: EHMHxkJ/zweIBMREcRiJ0uq1o9CNYmlEX2NUFiNuXe4ti7PgJLLs5c5KF9ZH375FI/B5Ojnk6D7oGaNtHGb2pw==
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.47"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "arm-rtems7" -o "x86_64-linux-gnu" == "arm-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=arm-rtems7 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/tester/rtems-cron-7/tools/7 --bindir=/home/tester/rtems-cron-7/tools/7/bin --exec-prefix=/home/tester/rtems-cron-7/tools/7 --includedir=/home/tester/rtems-cron-7/tools/7/include --libdir=/home/tester/rtems-cron-7/tools/7/lib --mandir=/home/tester/rtems-cron-7/tools/7/share/man --infodir=/home/tester/rtems-cron-7/tools/7/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/bin/arm-rtems7-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/share/man/man1/arm-rtems7-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/bin/arm-rtems7-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/share/man/man1/arm-rtems7-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/bin/arm-rtems7-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/share/man/man1/arm-rtems7-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/bin/arm-rtems7-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/share/man/man1/arm-rtems7-windmc*
fi
cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Thu Aug 20 12:13:25 2026
==============================================================================
Report: tools/rtems-binutils-2.47.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
Remotes:
[ remotes removed, contact sender for details ]
Status:
Clean
Head:
Commit: 5fc5d42b696e8c0068d8f0fbcac0a2f3749cf0f1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) tools/rtems-binutils-2.47.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) tools/rtems-binutils-2.47.cfg
------------------------------------------------------------------------------
Package: arm-rtems7-binutils-2.47-x86_64-linux-gnu-1
Config: tools/rtems-binutils-2.47.cfg
Summary:
Binutils v2.47 for target arm-rtems7 on host x86_64-linux-gnu
URL:
http://sources.redhat.com/binutils
Version:
2.47
Release:
1
Sources: 1
1: https://ftpmirror.gnu.org/binutils/binutils-2.47.tar.bz2
sha512: EHMHxkJ/zweIBMREcRiJ0uq1o9CNYmlEX2NUFiNuXe4ti7PgJLLs5c5KF9ZH375FI/B5Ojnk6D7oGaNtHGb2pw==
Patches: 0
Preparation:
build_top=$(pwd)
binutils_source="binutils-2.47"
source_dir_binutils=${binutils_source}
%setup source binutils -q -n ${binutils_source}
%setup patch binutils -p1
cd ${build_top}
Build:
build_top=$(pwd)
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross-build (Xc) if no target or the host and target match.
# Canadian-cross (Cxc) if build, host and target are all different.
if test -z "arm-rtems7" -o "x86_64-linux-gnu" == "arm-rtems7" ; then
build_dir="build-xc"
else
build_dir="build-cxc"
fi
else
build_dir="build"
fi
mkdir -p ${build_dir}
cd ${build_dir}
# Host and build flags, Cross build if host and build are different and
# Cxc build if target is deifned and also different.
# Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
# Cross build
CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
CPPFLAGS="${SB_HOST_CPPFLAGS}"
CFLAGS="${SB_HOST_CFLAGS}"
CXXFLAGS="${SB_HOST_CXXFLAGS}"
LDFLAGS="${SB_HOST_LDFLAGS}"
LDLIBS="${SB_HOST_LIBS}"
LIBS="${SB_HOST_LIBS}"
# Host
CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
LIBS_FOR_HOST="${SB_HOST_LIBS}"
CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
# Build
CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
else
LDFLAGS="${SB_BUILD_LDFLAGS}"
LDLIBS="${SB_BUILD_LIBS}"
LIBS="${SB_BUILD_LIBS}"
CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
CC_FOR_BUILD=${CC}
CXX_FOR_BUILD=${CXX}
fi
export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
../${source_dir_binutils}/configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=arm-rtems7 --verbose --disable-nls --disable-gdb --disable-libdecnumber --disable-readline --disable-sim --enable-deterministic-archives --enable-64-bit-bfd --without-included-gettext --disable-win32-registry --disable-werror --prefix=/home/tester/rtems-cron-7/tools/7 --bindir=/home/tester/rtems-cron-7/tools/7/bin --exec-prefix=/home/tester/rtems-cron-7/tools/7 --includedir=/home/tester/rtems-cron-7/tools/7/include --libdir=/home/tester/rtems-cron-7/tools/7/lib --mandir=/home/tester/rtems-cron-7/tools/7/share/man --infodir=/home/tester/rtems-cron-7/tools/7/share/info --disable-warn-execstack --disable-warn-rwx-segments
make -j 4 all
cd ${build_top}
Install:
cd ${build_top}
/bin/rm -rf $SB_BUILD_ROOT
cd ${build_dir}
make DESTDIR=$SB_BUILD_ROOT install
/bin/rm -rf $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/configure.info*
/bin/rm -f $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/dir
touch $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/info/dir
mkdir -p $SB_BUILD_ROOT/home/tester/rtems-cron-7/tools/7/share/locale
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/lib/libiberty*
if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/bin/arm-rtems7-dlltool; then
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/share/man/man1/arm-rtems7-dlltool*
fi
if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/bin/arm-rtems7-nlmconv; then
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/share/man/man1/arm-rtems7-nlmconv*
fi
if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/bin/arm-rtems7-windres; then
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/share/man/man1/arm-rtems7-windres*
fi
if test ! -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/bin/arm-rtems7-windmc; then
/bin/rm -f ${SB_BUILD_ROOT}/home/tester/rtems-cron-7/tools/7/share/man/man1/arm-rtems7-windmc*
fi
cd ${build_top}
More information about the build
mailing list