Build Linux: PASSED devel/qemu on x86_64-linux-gnu

Wed Feb 11 08:48:53 UTC 2026

RTEMS Source Builder - Set Builder, 7 (424f142d70c9)

Host: Linux-6.8.0-90-generic-x86_64-with-glibc2.39
       Linux VM-Ubuntu24 6.8.0-90-generic #91-Ubuntu SMP PREEMPT_DYNAMIC Tue Nov
       18 14:14:30 UTC 2025 x86_64 x86_64

Build Time: 0:21:15.057605

Sizes
=====

Maximum build usage: 10.835GB
Total size: 2.681GB
Installed : 2.511GB
Sources: 174.428MB
Patches: 19.664KB

Output
======

Build Set: devel/qemu
Build Set: devel/autotools-internal.bset
config: devel/autoconf-2.72-1.cfg
package: autoconf-2.72-x86_64-linux-gnu-1
download: https://dl.rtems.org/3f71d459e2127ef2c98b37f11f5284f0c92318ad8d31c5b6034bed370adfe9f3d0f7a12f87e2efced06c11e2a159de4d4a292b751104e83daf11342f25ba9721/autoconf-2.72.tar.gz -> sources/autoconf-2.72.tar.gz
download: https://dl.rtems.org/3f71d459e2127ef2c98b37f11f5284f0c92318ad8d31c5b6034bed370adfe9f3d0f7a12f87e2efced06c11e2a159de4d4a292b751104e83daf11342f25ba9721/autoconf-2.72.tar.gz: error: HTTP Error 404: Not Found
download: https://ftpmirror.gnu.org/autoconf/autoconf-2.72.tar.gz -> sources/autoconf-2.72.tar.gz
 redirect: https://mirror.team-cymru.com/gnu/autoconf/autoconf-2.72.tar.gz
building: autoconf-2.72-x86_64-linux-gnu-1
sizes: autoconf-2.72-x86_64-linux-gnu-1: 8.044MB (installed: 0.000B)
cleaning: autoconf-2.72-x86_64-linux-gnu-1
config: devel/automake-1.18.1-1.cfg
package: automake-1.18.1-x86_64-linux-gnu-1
download: https://dl.rtems.org/e07b439babea7101e04e37f65fbd2ac9df7b41809fc71bd412f21f396063713721c0215a63c87059dbaa0121049f7c39fc678c77373c303d79aba86d4b66f9c2/automake-1.18.1.tar.gz -> sources/automake-1.18.1.tar.gz
download: https://dl.rtems.org/e07b439babea7101e04e37f65fbd2ac9df7b41809fc71bd412f21f396063713721c0215a63c87059dbaa0121049f7c39fc678c77373c303d79aba86d4b66f9c2/automake-1.18.1.tar.gz: error: HTTP Error 404: Not Found
download: https://ftpmirror.gnu.org/automake/automake-1.18.1.tar.gz -> sources/automake-1.18.1.tar.gz
 redirect: https://ftp.wayne.edu/gnu/automake/automake-1.18.1.tar.gz
building: automake-1.18.1-x86_64-linux-gnu-1
sizes: automake-1.18.1-x86_64-linux-gnu-1: 9.670MB (installed: 0.000B)
cleaning: automake-1.18.1-x86_64-linux-gnu-1
config: devel/libtool-2.4.7-1.cfg
package: libtool-2.4.7-x86_64-linux-gnu-1
download: https://dl.rtems.org/27acef46d9eb67203d708b57d80b853f76fa4b9c2720ff36ec161e6cdf702249e7982214ddf60bae75511aa79bc7d92aa27e3eab7ef9c0f5c040e8e42e76a385/libtool-2.4.7.tar.gz -> sources/libtool-2.4.7.tar.gz
building: libtool-2.4.7-x86_64-linux-gnu-1
sizes: libtool-2.4.7-x86_64-linux-gnu-1: 9.716MB (installed: 0.000B)
cleaning: libtool-2.4.7-x86_64-linux-gnu-1
cleaning: autoconf-2.72-x86_64-linux-gnu-1
cleaning: automake-1.18.1-x86_64-linux-gnu-1
cleaning: libtool-2.4.7-x86_64-linux-gnu-1
Build Sizes: usage: 9.716MB total: 6.765MB (sources: 6.746MB, patches: 19.014KB, installed 0.000B)
Build Set: Time 0:00:17.035530
config: devel/libiconv-1.14-1.cfg
config: devel/gettext-0.26-1.cfg
package: gettext-0.26-x86_64-linux-gnu-1
download: https://dl.rtems.org/6c2afb0737843028e1cd27f1cd7dd5b81372ccff8cd8e01e17cfdc517afdd9a849c232f1ff5adca5eb4b03f2cc64f4a3f689ae8b84e523ceeae85384f3844083/gettext-0.26.tar.gz -> sources/gettext-0.26.tar.gz
download: https://dl.rtems.org/6c2afb0737843028e1cd27f1cd7dd5b81372ccff8cd8e01e17cfdc517afdd9a849c232f1ff5adca5eb4b03f2cc64f4a3f689ae8b84e523ceeae85384f3844083/gettext-0.26.tar.gz: error: HTTP Error 404: Not Found
download: http://ftpmirror.gnu.org/gettext/gettext-0.26.tar.gz -> sources/gettext-0.26.tar.gz
 redirect: http://mirrors.ocf.berkeley.edu/gnu/gettext/gettext-0.26.tar.gz
building: gettext-0.26-x86_64-linux-gnu-1
sizes: gettext-0.26-x86_64-linux-gnu-1: 433.870MB (installed: 58.943MB)
cleaning: gettext-0.26-x86_64-linux-gnu-1
reporting: devel/gettext-0.26-1.cfg -> gettext-0.26-x86_64-linux-gnu-1.txt
reporting: devel/gettext-0.26-1.cfg -> gettext-0.26-x86_64-linux-gnu-1.xml
config: devel/libffi-3.4.3-1.cfg
package: libffi-3.4.3-x86_64-linux-gnu-1
download: https://dl.rtems.org/6e3620d3842ae0f983c47c3268364be32b6eeb2fc708b23d141531730e9149abb035c618b295be834999eadef64fabfa39df21c955c40473f3bbc9fd3170bad8/libffi-3.4.3.tar.gz -> sources/libffi-3.4.3.tar.gz
download: https://dl.rtems.org/6e3620d3842ae0f983c47c3268364be32b6eeb2fc708b23d141531730e9149abb035c618b295be834999eadef64fabfa39df21c955c40473f3bbc9fd3170bad8/libffi-3.4.3.tar.gz: error: HTTP Error 404: Not Found
download: https://sourceware.org/pub/libffi/libffi-3.4.3.tar.gz -> sources/libffi-3.4.3.tar.gz
building: libffi-3.4.3-x86_64-linux-gnu-1
sizes: libffi-3.4.3-x86_64-linux-gnu-1: 8.080MB (installed: 614.242KB)
cleaning: libffi-3.4.3-x86_64-linux-gnu-1
reporting: devel/libffi-3.4.3-1.cfg -> libffi-3.4.3-x86_64-linux-gnu-1.txt
reporting: devel/libffi-3.4.3-1.cfg -> libffi-3.4.3-x86_64-linux-gnu-1.xml
config: devel/pixman-0.46.4.cfg
package: pixman-0.46.4-x86_64-linux-gnu-1
download: https://dl.rtems.org/10ddb88b51f5456c440d77a7b4230600b099e818378a9b55f715bbe5ec3d9f1e9da2124d28a2bd3377f1ab20af87e0ec4fa9dadaa20a2f1f880dd2dc7f27ca6c/pixman-0.46.4.tar.gz -> sources/pixman-0.46.4.tar.gz
download: https://dl.rtems.org/10ddb88b51f5456c440d77a7b4230600b099e818378a9b55f715bbe5ec3d9f1e9da2124d28a2bd3377f1ab20af87e0ec4fa9dadaa20a2f1f880dd2dc7f27ca6c/pixman-0.46.4.tar.gz: error: HTTP Error 404: Not Found
download: http://cairographics.org/releases/pixman-0.46.4.tar.gz -> sources/pixman-0.46.4.tar.gz
 redirect: https://www.cairographics.org/releases/pixman-0.46.4.tar.gz
building: pixman-0.46.4-x86_64-linux-gnu-1
sizes: pixman-0.46.4-x86_64-linux-gnu-1: 49.918MB (installed: 5.680MB)
cleaning: pixman-0.46.4-x86_64-linux-gnu-1
reporting: devel/pixman-0.46.4.cfg -> pixman-0.46.4-x86_64-linux-gnu-1.txt
reporting: devel/pixman-0.46.4.cfg -> pixman-0.46.4-x86_64-linux-gnu-1.xml
config: devel/glib-2.80.2.cfg
package: glib-2.80.2-x86_64-linux-gnu-1
download: https://dl.rtems.org/9b00d6741523ba5bc60c83da9fbbc1a13bd61307612471acd7faaf57cbcb480941fd61dfff94b2712bd78094beff3af1ceffe4985db0ff97ffe948cc67b821aa/glib-2.80.2.tar.xz -> sources/glib-2.80.2.tar.xz
download: https://dl.rtems.org/72fbde87fecec3aa4b47225dd919ea1d55e97f2cbcf02aba26e5a0d3b1ffb58c25a80a9ef069eb99f9cf4e41ba9604ad06a7ec159870e1e875d86820e12256d3/pcre2-10.42.tar.bz2 -> sources/pcre2-10.42.tar.bz2
download: https://dl.rtems.org/c4b2f9701b8d48d3ce90f7d676b357ccce4cd044c7fddf8d253cd5d4947bc2ad56e8ba58c9b8c3eb1e36695285c95a4bb9b2a961e45729f08b684b7ad96f01bb/pcre2_10.42-2_patch.zip -> sources/pcre2_10.42-2_patch.zip
building: glib-2.80.2-x86_64-linux-gnu-1
sizes: glib-2.80.2-x86_64-linux-gnu-1: 248.239MB (installed: 70.322MB)
cleaning: glib-2.80.2-x86_64-linux-gnu-1
reporting: devel/glib-2.80.2.cfg -> glib-2.80.2-x86_64-linux-gnu-1.txt
reporting: devel/glib-2.80.2.cfg -> glib-2.80.2-x86_64-linux-gnu-1.xml
config: devel/libslirp-4.9.1-1.cfg
package: libslirp-4.9.1-x86_64-linux-gnu-1
download: https://dl.rtems.org/cdb66f6280a9982de3c32269aee352bdf225db918590255abaed9bcd0aee4e996d2d8c2c3f62473f57485603ec29fd35723b0649d3ec3c41cc28b22ce913f63b/libslirp-v4.9.1.tar.gz -> sources/libslirp-v4.9.1.tar.gz
building: libslirp-4.9.1-x86_64-linux-gnu-1
sizes: libslirp-4.9.1-x86_64-linux-gnu-1: 3.316MB (installed: 525.327KB)
cleaning: libslirp-4.9.1-x86_64-linux-gnu-1
reporting: devel/libslirp-4.9.1-1.cfg -> libslirp-4.9.1-x86_64-linux-gnu-1.txt
reporting: devel/libslirp-4.9.1-1.cfg -> libslirp-4.9.1-x86_64-linux-gnu-1.xml
config: devel/dtc-1.7.2-1.cfg
package: dtc-1.7.2-x86_64-linux-gnu-1
building: dtc-1.7.2-x86_64-linux-gnu-1
sizes: dtc-1.7.2-x86_64-linux-gnu-1: 4.745MB (installed: 1.258MB)
cleaning: dtc-1.7.2-x86_64-linux-gnu-1
reporting: devel/dtc-1.7.2-1.cfg -> dtc-1.7.2-x86_64-linux-gnu-1.txt
reporting: devel/dtc-1.7.2-1.cfg -> dtc-1.7.2-x86_64-linux-gnu-1.xml
config: devel/qemu-9.2.4-1.cfg
package: qemu-9.2.4-x86_64-linux-gnu-1
download: https://dl.rtems.org/5aa2ea23d234dd896de73f778defde93f3b490bd22947c396091fdd2231ce5ccd17767c910170a952be88a5593725f1c31b15a6d19b3d30637465d17fb69651c/qemu-9.2.4.tar.xz -> sources/qemu-9.2.4.tar.xz
Creating source directory: patches
download: https://dl.rtems.org/5e7bc77495e45b5d6f117959b0a317a99397e196cfffc40e1b5e4462ef04e645d44fbdcd5c7b51957651fd66fac88db5b47f3c90cdc8a410999f4decce345ac6/Provide-the-missing-LIBUSB_LOG_LEVEL_-for-older-libusb-or-FreeBSD.-Providing-just-the-...<see log> -> patches/Provide-the-missing-LIBUSB_LOG_LEVEL_-for-older-libusb-or-FreeBSD.-Providing-just-the-needed-value-as-a-defined..patch
building: qemu-9.2.4-x86_64-linux-gnu-1
sizes: qemu-9.2.4-x86_64-linux-gnu-1: 8.325GB (installed: 2.376GB)
cleaning: qemu-9.2.4-x86_64-linux-gnu-1
reporting: devel/qemu-9.2.4-1.cfg -> qemu-9.2.4-x86_64-linux-gnu-1.txt
reporting: devel/qemu-9.2.4-1.cfg -> qemu-9.2.4-x86_64-linux-gnu-1.xml
staging: gettext-0.26-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/rtems-source-builder/bare/build/tmp/sb-1002-staging
installing: gettext-0.26-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/tools/7
staging: libffi-3.4.3-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/rtems-source-builder/bare/build/tmp/sb-1002-staging
installing: libffi-3.4.3-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/tools/7
staging: pixman-0.46.4-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/rtems-source-builder/bare/build/tmp/sb-1002-staging
installing: pixman-0.46.4-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/tools/7
staging: glib-2.80.2-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/rtems-source-builder/bare/build/tmp/sb-1002-staging
installing: glib-2.80.2-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/tools/7
staging: libslirp-4.9.1-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/rtems-source-builder/bare/build/tmp/sb-1002-staging
installing: libslirp-4.9.1-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/tools/7
staging: dtc-1.7.2-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/rtems-source-builder/bare/build/tmp/sb-1002-staging
installing: dtc-1.7.2-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/tools/7
staging: qemu-9.2.4-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/rtems-source-builder/bare/build/tmp/sb-1002-staging
installing: qemu-9.2.4-x86_64-linux-gnu-1 -> /home/tester/rtems-cron-next/tools/7
cleaning: gettext-0.26-x86_64-linux-gnu-1
cleaning: libffi-3.4.3-x86_64-linux-gnu-1
cleaning: pixman-0.46.4-x86_64-linux-gnu-1
cleaning: glib-2.80.2-x86_64-linux-gnu-1
cleaning: libslirp-4.9.1-x86_64-linux-gnu-1
cleaning: dtc-1.7.2-x86_64-linux-gnu-1
cleaning: qemu-9.2.4-x86_64-linux-gnu-1
Build Sizes: usage: 10.835GB total: 2.681GB (sources: 174.428MB, patches: 19.664KB, installed 2.511GB)
installing: devel/qemu -> /home/tester/rtems-cron-next/tools/7
clean staging: devel/qemu
Staging Size: 2.511GB
Mailing report: build at rtems.org

Report
======

==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:55:58 2026
==============================================================================
Report: devel/gettext-0.26-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gettext-0.26-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gettext-0.26-1.cfg
------------------------------------------------------------------------------
Package: gettext-0.26-x86_64-linux-gnu-1
 Config: devel/gettext-0.26-1.cfg
 Summary:
  GetText offers to programmers, translators, and even users, a well
  integrated set of tools and documentation.
 URL:
  http://www.gnu.org/software/gettext/
 Version:
  0.26
 Release:
  1
  Sources: 1
    1: http://ftpmirror.gnu.org/gettext/gettext-0.26.tar.gz
       sha512: bCr7BzeEMCjhzSfxzX3VuBNyzP+M2OAeF8/cUXr92ahJwjLx/1rcpetLA/LMZPSj9omui4TlI87q6FOE84RAgw==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_gettext="gettext-0.26"
  %setup source gettext -q -n gettext-0.26
  %setup patch gettext -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "" -o "x86_64-linux-gnu" == "" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gettext}/configure  --prefix=/home/tester/rtems-cron-next/tools/7  --bindir=/home/tester/rtems-cron-next/tools/7/bin  --exec_prefix=/home/tester/rtems-cron-next/tools/7  --includedir=/home/tester/rtems-cron-next/tools/7/include  --libdir=/home/tester/rtems-cron-next/tools/7/lib  --libexecdir=/home/tester/rtems-cron-next/tools/7/libexec  --mandir=/home/tester/rtems-cron-next/tools/7/share/man  --infodir=/home/tester/rtems-cron-next/tools/7/share/info  --datadir=/home/tester/rtems-cron-next/tools/7/share  --build=x86_64-linux-gnu --host=x86_64-linux-gnu
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:55:58 2026
==============================================================================
Report: devel/gettext-0.26-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/gettext-0.26-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/gettext-0.26-1.cfg
------------------------------------------------------------------------------
Package: gettext-0.26-x86_64-linux-gnu-1
 Config: devel/gettext-0.26-1.cfg
 Summary:
  GetText offers to programmers, translators, and even users, a well
  integrated set of tools and documentation.
 URL:
  http://www.gnu.org/software/gettext/
 Version:
  0.26
 Release:
  1
  Sources: 1
    1: http://ftpmirror.gnu.org/gettext/gettext-0.26.tar.gz
       sha512: bCr7BzeEMCjhzSfxzX3VuBNyzP+M2OAeF8/cUXr92ahJwjLx/1rcpetLA/LMZPSj9omui4TlI87q6FOE84RAgw==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_gettext="gettext-0.26"
  %setup source gettext -q -n gettext-0.26
  %setup patch gettext -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "" -o "x86_64-linux-gnu" == "" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  ../${source_dir_gettext}/configure  --prefix=/home/tester/rtems-cron-next/tools/7  --bindir=/home/tester/rtems-cron-next/tools/7/bin  --exec_prefix=/home/tester/rtems-cron-next/tools/7  --includedir=/home/tester/rtems-cron-next/tools/7/include  --libdir=/home/tester/rtems-cron-next/tools/7/lib  --libexecdir=/home/tester/rtems-cron-next/tools/7/libexec  --mandir=/home/tester/rtems-cron-next/tools/7/share/man  --infodir=/home/tester/rtems-cron-next/tools/7/share/info  --datadir=/home/tester/rtems-cron-next/tools/7/share  --build=x86_64-linux-gnu --host=x86_64-linux-gnu
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:03 2026
==============================================================================
Report: devel/libffi-3.4.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libffi-3.4.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libffi-3.4.3-1.cfg
------------------------------------------------------------------------------
Package: libffi-3.4.3-x86_64-linux-gnu-1
 Config: devel/libffi-3.4.3-1.cfg
 Summary:
  LibFFI provides a portable, high level programming interface to
  various calling conventions.
 URL:
  https://sourceware.org/libffi/
 Version:
  3.4.3
 Release:
  1
  Sources: 1
    1: https://sourceware.org/pub/libffi/libffi-3.4.3.tar.gz
       sha512: bjYg04Qq4PmDxHwyaDZL4ytu6y/HCLI9FBUxcw6RSauwNcYYspW+g0mZ6t72T6v6Od8hyVXEBHPzu8n9MXC62A==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_libffi="libffi-3.4.3"
  %setup source libffi -q -n libffi-3.4.3
  %setup patch libffi -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "" -o "x86_64-linux-gnu" == "" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  CFLAGS="${CFLAGS} -Wno-implicit-function-declaration"
  ../${source_dir_libffi}/configure  --prefix=/home/tester/rtems-cron-next/tools/7  --bindir=/home/tester/rtems-cron-next/tools/7/bin  --exec_prefix=/home/tester/rtems-cron-next/tools/7  --includedir=/home/tester/rtems-cron-next/tools/7/include  --libdir=/home/tester/rtems-cron-next/tools/7/lib  --libexecdir=/home/tester/rtems-cron-next/tools/7/libexec  --mandir=/home/tester/rtems-cron-next/tools/7/share/man  --infodir=/home/tester/rtems-cron-next/tools/7/share/info  --datadir=/home/tester/rtems-cron-next/tools/7/share  --build=x86_64-linux-gnu --host=x86_64-linux-gnu
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:03 2026
==============================================================================
Report: devel/libffi-3.4.3-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libffi-3.4.3-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libffi-3.4.3-1.cfg
------------------------------------------------------------------------------
Package: libffi-3.4.3-x86_64-linux-gnu-1
 Config: devel/libffi-3.4.3-1.cfg
 Summary:
  LibFFI provides a portable, high level programming interface to
  various calling conventions.
 URL:
  https://sourceware.org/libffi/
 Version:
  3.4.3
 Release:
  1
  Sources: 1
    1: https://sourceware.org/pub/libffi/libffi-3.4.3.tar.gz
       sha512: bjYg04Qq4PmDxHwyaDZL4ytu6y/HCLI9FBUxcw6RSauwNcYYspW+g0mZ6t72T6v6Od8hyVXEBHPzu8n9MXC62A==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_libffi="libffi-3.4.3"
  %setup source libffi -q -n libffi-3.4.3
  %setup patch libffi -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "" -o "x86_64-linux-gnu" == "" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  CFLAGS="${CFLAGS} -Wno-implicit-function-declaration"
  ../${source_dir_libffi}/configure  --prefix=/home/tester/rtems-cron-next/tools/7  --bindir=/home/tester/rtems-cron-next/tools/7/bin  --exec_prefix=/home/tester/rtems-cron-next/tools/7  --includedir=/home/tester/rtems-cron-next/tools/7/include  --libdir=/home/tester/rtems-cron-next/tools/7/lib  --libexecdir=/home/tester/rtems-cron-next/tools/7/libexec  --mandir=/home/tester/rtems-cron-next/tools/7/share/man  --infodir=/home/tester/rtems-cron-next/tools/7/share/info  --datadir=/home/tester/rtems-cron-next/tools/7/share  --build=x86_64-linux-gnu --host=x86_64-linux-gnu
  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:16 2026
==============================================================================
Report: devel/pixman-0.46.4.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/pixman-0.46.4.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/pixman-0.46.4.cfg
------------------------------------------------------------------------------
Package: pixman-0.46.4-x86_64-linux-gnu-1
 Config: devel/pixman-0.46.4.cfg
 Summary:
  Pixman is a low-level software library for pixel manipulation,
  providing features such as image compositing and trapezoid
  rasterization.
 URL:
  http://www.pixman.org/
 Version:
  0.46.4
 Release:
  1
  Sources: 1
    1: http://cairographics.org/releases/pixman-0.46.4.tar.gz
       sha512: EN24i1H1RWxEDXentCMGALCZ6Bg3iptV9xW75ew9nx6dohJNKKK9M3fxqyCvh+DsT6na2qIKLx+IDdLcfyfKbA==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_pixman="pixman-0.46.4"
  %setup source pixman -q -n pixman-0.46.4
  %setup patch pixman -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd ${source_dir_pixman}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  SYSROOT=$SB_TMPPREFIX
  PKG_CONFIG_PATH=$SYSROOT/lib/pkgconfig  PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${CC} ${LDFLAGS}"  LD_FOR_BUILD="${CC_FOR_BUILD} ${LDFLAGS}"  LDFLAGS="${LDFLAGS} -Wl,-rpath -Wl,/$SB_PREFIX_CLEAN/lib/"  meson setup  --prefix=/home/tester/rtems-cron-next/tools/7  -Dgtk=disabled  -Dlibpng=disabled  _build
  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${LD} ${LDFLAGS}"  LD_FOR_BUILD="${LD_FOR_BUILD} ${LDFLAGS}"  ninja -v -C _build
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_pixman}
  DESTDIR=$SB_BUILD_ROOT  ninja -C _build install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:16 2026
==============================================================================
Report: devel/pixman-0.46.4.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/pixman-0.46.4.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/pixman-0.46.4.cfg
------------------------------------------------------------------------------
Package: pixman-0.46.4-x86_64-linux-gnu-1
 Config: devel/pixman-0.46.4.cfg
 Summary:
  Pixman is a low-level software library for pixel manipulation,
  providing features such as image compositing and trapezoid
  rasterization.
 URL:
  http://www.pixman.org/
 Version:
  0.46.4
 Release:
  1
  Sources: 1
    1: http://cairographics.org/releases/pixman-0.46.4.tar.gz
       sha512: EN24i1H1RWxEDXentCMGALCZ6Bg3iptV9xW75ew9nx6dohJNKKK9M3fxqyCvh+DsT6na2qIKLx+IDdLcfyfKbA==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_pixman="pixman-0.46.4"
  %setup source pixman -q -n pixman-0.46.4
  %setup patch pixman -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd ${source_dir_pixman}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  SYSROOT=$SB_TMPPREFIX
  PKG_CONFIG_PATH=$SYSROOT/lib/pkgconfig  PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${CC} ${LDFLAGS}"  LD_FOR_BUILD="${CC_FOR_BUILD} ${LDFLAGS}"  LDFLAGS="${LDFLAGS} -Wl,-rpath -Wl,/$SB_PREFIX_CLEAN/lib/"  meson setup  --prefix=/home/tester/rtems-cron-next/tools/7  -Dgtk=disabled  -Dlibpng=disabled  _build
  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${LD} ${LDFLAGS}"  LD_FOR_BUILD="${LD_FOR_BUILD} ${LDFLAGS}"  ninja -v -C _build
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_pixman}
  DESTDIR=$SB_BUILD_ROOT  ninja -C _build install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:50 2026
==============================================================================
Report: devel/glib-2.80.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/glib-2.80.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/glib-2.80.2.cfg
------------------------------------------------------------------------------
Package: glib-2.80.2-x86_64-linux-gnu-1
 Config: devel/glib-2.80.2.cfg
 Summary:
  GLib provides the core application building blocks for
  libraries and applications written in C.
 URL:
  https://developer.gnome.org/glib/
 Version:
  2.80.2
 Release:
  1
  Sources: 3
    1: https://download.gnome.org/sources/glib/2.80/glib-2.80.2.tar.xz
       sha512: mwDWdBUjulvGDIPan7vBoTvWEwdhJHGs1/qvV8vLSAlB/WHf/5SycSvXgJS+/zrxzv/kmF2w/5f/6UjMZ7ghqg==
    2: https://github.com/PhilipHazel/pcre2/releases/download/pcre2-10.42/pcre2-10.42.tar.bz2
       sha512: cvveh/7Ow6pLRyJd2RnqHVXpfyy88Cq6JuWg07H/tYwlqAqe8GnrmfnPTkG6lgStBqfsFZhw4eh12Ggg4SJW0w==
    3: --rsb-file=pcre2_10.42-2_patch.zip https://wrapdb.mesonbuild.com/v2/pcre2_10.42-2/get_patch
       No checksum
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_glib="glib-2.80.2"
  %setup source glib -q -n glib-2.80.2
  %setup patch glib -p1
  mkdir -p subprojects/packagecache
  %setup source pcre2 -q -g -p subprojects/packagecache
  %setup source pcre2_patches -q -g -p subprojects/packagecache
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd ${source_dir_glib}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  SYSROOT=$SB_TMPPREFIX
  PKG_CONFIG_PATH=$SYSROOT/lib/pkgconfig  PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${CC} ${LDFLAGS}"  LD_FOR_BUILD="${CC_FOR_BUILD} ${LDFLAGS}"  LDFLAGS="${LDFLAGS} -Wl,-rpath -Wl,/$SB_PREFIX_CLEAN/lib/"  meson setup  --prefix=/home/tester/rtems-cron-next/tools/7  -Db_lundef=false  -Ddefault_library=both  -Dtests=false  -Dinstalled_tests=false  -Dintrospection=disabled  -Dlibmount=disabled  -Dlocalstatedir=/var  -Druntime_dir=/var/run  -Dselinux=disabled  -Dxattr=false  _build
  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${LD} ${LDFLAGS}"  LD_FOR_BUILD="${LD_FOR_BUILD} ${LDFLAGS}"  ninja -v -C _build
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_glib}
  DESTDIR=$SB_BUILD_ROOT  ninja -C _build install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:50 2026
==============================================================================
Report: devel/glib-2.80.2.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/glib-2.80.2.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/glib-2.80.2.cfg
------------------------------------------------------------------------------
Package: glib-2.80.2-x86_64-linux-gnu-1
 Config: devel/glib-2.80.2.cfg
 Summary:
  GLib provides the core application building blocks for
  libraries and applications written in C.
 URL:
  https://developer.gnome.org/glib/
 Version:
  2.80.2
 Release:
  1
  Sources: 3
    1: https://download.gnome.org/sources/glib/2.80/glib-2.80.2.tar.xz
       sha512: mwDWdBUjulvGDIPan7vBoTvWEwdhJHGs1/qvV8vLSAlB/WHf/5SycSvXgJS+/zrxzv/kmF2w/5f/6UjMZ7ghqg==
    2: https://github.com/PhilipHazel/pcre2/releases/download/pcre2-10.42/pcre2-10.42.tar.bz2
       sha512: cvveh/7Ow6pLRyJd2RnqHVXpfyy88Cq6JuWg07H/tYwlqAqe8GnrmfnPTkG6lgStBqfsFZhw4eh12Ggg4SJW0w==
    3: --rsb-file=pcre2_10.42-2_patch.zip https://wrapdb.mesonbuild.com/v2/pcre2_10.42-2/get_patch
       No checksum
  Patches: 0
 Preparation:
  build_top=$(pwd)
  source_dir_glib="glib-2.80.2"
  %setup source glib -q -n glib-2.80.2
  %setup patch glib -p1
  mkdir -p subprojects/packagecache
  %setup source pcre2 -q -g -p subprojects/packagecache
  %setup source pcre2_patches -q -g -p subprojects/packagecache
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd ${source_dir_glib}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  SYSROOT=$SB_TMPPREFIX
  PKG_CONFIG_PATH=$SYSROOT/lib/pkgconfig  PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${CC} ${LDFLAGS}"  LD_FOR_BUILD="${CC_FOR_BUILD} ${LDFLAGS}"  LDFLAGS="${LDFLAGS} -Wl,-rpath -Wl,/$SB_PREFIX_CLEAN/lib/"  meson setup  --prefix=/home/tester/rtems-cron-next/tools/7  -Db_lundef=false  -Ddefault_library=both  -Dtests=false  -Dinstalled_tests=false  -Dintrospection=disabled  -Dlibmount=disabled  -Dlocalstatedir=/var  -Druntime_dir=/var/run  -Dselinux=disabled  -Dxattr=false  _build
  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${LD} ${LDFLAGS}"  LD_FOR_BUILD="${LD_FOR_BUILD} ${LDFLAGS}"  ninja -v -C _build
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${source_dir_glib}
  DESTDIR=$SB_BUILD_ROOT  ninja -C _build install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:53 2026
==============================================================================
Report: devel/libslirp-4.9.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libslirp-4.9.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libslirp-4.9.1-1.cfg
------------------------------------------------------------------------------
Package: libslirp-4.9.1-x86_64-linux-gnu-1
 Config: devel/libslirp-4.9.1-1.cfg
 Summary:
  libslirp v4.9.1 for target  on host x86_64-linux-gnu
 URL:
  https://gitlab.freedesktop.org/slirp/libslirp
 Version:
  4.9.1
 Release:
  1
  Sources: 1
    1: https://gitlab.freedesktop.org/slirp/libslirp/-/archive/v4.9.1/libslirp-v4.9.1.tar.gz
       sha512: zbZvYoCpmC3jwyJpruNSvfIl25GFkCVauu2bzQruTpltLYwsP2JHP1dIVgPsKf01cjsGSdPsPEHMKLIs6RP2Ow==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source libslirp -q -n libslirp-v4.9.1
  %setup patch libslirp -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd libslirp-v4.9.1
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  SYSROOT=$SB_TMPPREFIX
  PKG_CONFIG_PATH=$SYSROOT/lib/x86_64-linux-gnu/pkgconfig:$SYSROOT/lib/pkgconfig  PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${CC} ${LDFLAGS}"  LD_FOR_BUILD="${CC_FOR_BUILD} ${LDFLAGS}"  LDFLAGS="${LDFLAGS} -Wl,-rpath -Wl,/$SB_PREFIX_CLEAN/lib/"  meson setup  --prefix=/home/tester/rtems-cron-next/tools/7  build
  ninja -v -C build
  cd ${build_top}
 Install:
  build_top=$(pwd)
  cd libslirp-v4.9.1
  /bin/rm -rf $SB_BUILD_ROOT
  DESTDIR=$SB_BUILD_ROOT  ninja -C build install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:53 2026
==============================================================================
Report: devel/libslirp-4.9.1-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/libslirp-4.9.1-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/libslirp-4.9.1-1.cfg
------------------------------------------------------------------------------
Package: libslirp-4.9.1-x86_64-linux-gnu-1
 Config: devel/libslirp-4.9.1-1.cfg
 Summary:
  libslirp v4.9.1 for target  on host x86_64-linux-gnu
 URL:
  https://gitlab.freedesktop.org/slirp/libslirp
 Version:
  4.9.1
 Release:
  1
  Sources: 1
    1: https://gitlab.freedesktop.org/slirp/libslirp/-/archive/v4.9.1/libslirp-v4.9.1.tar.gz
       sha512: zbZvYoCpmC3jwyJpruNSvfIl25GFkCVauu2bzQruTpltLYwsP2JHP1dIVgPsKf01cjsGSdPsPEHMKLIs6RP2Ow==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source libslirp -q -n libslirp-v4.9.1
  %setup patch libslirp -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd libslirp-v4.9.1
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  SYSROOT=$SB_TMPPREFIX
  PKG_CONFIG_PATH=$SYSROOT/lib/x86_64-linux-gnu/pkgconfig:$SYSROOT/lib/pkgconfig  PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT  LIBRARY_PATH=$SYSROOT/lib  LD_LIBRARY_PATH=$SYSROOT/lib  LD="${CC} ${LDFLAGS}"  LD_FOR_BUILD="${CC_FOR_BUILD} ${LDFLAGS}"  LDFLAGS="${LDFLAGS} -Wl,-rpath -Wl,/$SB_PREFIX_CLEAN/lib/"  meson setup  --prefix=/home/tester/rtems-cron-next/tools/7  build
  ninja -v -C build
  cd ${build_top}
 Install:
  build_top=$(pwd)
  cd libslirp-v4.9.1
  /bin/rm -rf $SB_BUILD_ROOT
  DESTDIR=$SB_BUILD_ROOT  ninja -C build install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:57 2026
==============================================================================
Report: devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.7.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.7.2-x86_64-linux-gnu-1
 Config: devel/dtc-1.7.2-1.cfg
 Summary:
  Device Tree Compiler v1.7.2 for target  on host x86_64-linux-gnu
 URL:
  https://www.devicetree.org/
 Version:
  1.7.2
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.7.2.tar.xz
       sha512: MPNhEXWlwpVWKC8/KJRwGlg364aWCNideMKAr0SLvDpbbIP1HCj5kYR8DrfEKqV1mbvDFDPxs7LI0WLLIWm5Hw==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.7.2
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.7.2
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  LIBS="${SB_HOST_LIBS}"
  CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
  make PREFIX=/home/tester/rtems-cron-next/tools/7 WARNINGS=
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.7.2
  make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/tester/rtems-cron-next/tools/7 WARNINGS= install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 02:56:57 2026
==============================================================================
Report: devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/dtc-1.7.2-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/dtc-1.7.2-1.cfg
------------------------------------------------------------------------------
Package: dtc-1.7.2-x86_64-linux-gnu-1
 Config: devel/dtc-1.7.2-1.cfg
 Summary:
  Device Tree Compiler v1.7.2 for target  on host x86_64-linux-gnu
 URL:
  https://www.devicetree.org/
 Version:
  1.7.2
 Release:
  1
  Sources: 1
    1: https://www.kernel.org/pub/software/utils/dtc/dtc-1.7.2.tar.xz
       sha512: MPNhEXWlwpVWKC8/KJRwGlg364aWCNideMKAr0SLvDpbbIP1HCj5kYR8DrfEKqV1mbvDFDPxs7LI0WLLIWm5Hw==
  Patches: 0
 Preparation:
  build_top=$(pwd)
  %setup source dtc -q -n dtc-1.7.2
  %setup patch dtc -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  cd dtc-1.7.2
  # Build and build flags means force build == host
  # gcc is not ready to be compiled with -std=gnu99
  LDFLAGS="${SB_HOST_LDFLAGS}"
  LIBS="${SB_HOST_LIBS}"
  CC=$(echo "gcc ${SB_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CXX=$(echo "g++ ${SB_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  CC_FOR_BUILD=${CC}
  CXX_FOR_BUILD=${CXX}
  export CC CXX CC_FOR_BUILD CXX_FOR_BUILD CFLAGS LDFLAGS LIBS
  make PREFIX=/home/tester/rtems-cron-next/tools/7 WARNINGS=
  cd ${build_top}
 Install:
  build_top=$(pwd)
  rm -rf $SB_BUILD_ROOT
  cd dtc-1.7.2
  make DESTDIR=$SB_BUILD_ROOT PREFIX=/home/tester/rtems-cron-next/tools/7 WARNINGS= install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 03:08:57 2026
==============================================================================
Report: devel/qemu-9.2.4-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/qemu-9.2.4-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/qemu-9.2.4-1.cfg
------------------------------------------------------------------------------
Package: qemu-9.2.4-x86_64-linux-gnu-1
 Config: devel/qemu-9.2.4-1.cfg
 Summary:
  Qemu is a simulator of various processors.
 URL:
  http://www.qemu.org/
 Version:
  9.2.4
 Release:
  1
  Sources: 1
    1: https://download.qemu.org/qemu-9.2.4.tar.xz
       sha512: WqLqI9I03Ylt5z93je/ek/O0kL0ilHw5YJH90iMc5czRd2fJEBcKlSvoilWTcl8cMbFabRmz0wY3Rl0X+2llHA==
  Patches: 1
    1: https://patchwork.ozlabs.org/patch/406903/raw
       No checksum
 Preparation:
  build_top=$(pwd)
  source_dir_qemu="qemu-9.2.4"
  %setup source qemu -q -n qemu-9.2.4
  %setup patch qemu -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "" -o "x86_64-linux-gnu" == "" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  CROSS_PREFIX_OPTION="--cross-prefix=x86_64-linux-gnu-"
  fi
  SYSROOT=$SB_TMPPREFIX
  STAGED_GLIB="-I${SB_TMPPREFIX}/include/glib-2.0 -I${SB_TMPPREFIX}/lib/glib-2.0/include"
  STAGED_PIXMAN=" -I${SB_TMPPREFIX}/include/pixman-1"
  STAGED_INCLUDES="${STAGED_GLIB} ${STAGED_PIXMAN}"
  CC="${CC} ${STAGED_INCLUDES}"
  CXX="${CXX} ${STAGED_INCLUDES}"
  PKG_CONFIG_DEFAULT_PATH=${PKG_CONFIG_PATH}  PKG_CONFIG_PATH=$SYSROOT/lib/x86_64-linux-gnu/pkgconfig:$SYSROOT/lib/pkgconfig:$SYSROOT/libdata/pkgconfig  PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT  LD_LIBRARY_PATH=$SYSROOT/lib  ../${source_dir_qemu}/configure  --prefix=/home/tester/rtems-cron-next/tools/7  ${CROSS_PREFIX_OPTION}  --make=make  --extra-ldflags="-Wl,-rpath -Wl,/$SB_PREFIX_CLEAN/lib/:/$SB_PREFIX_CLEAN/lib/x86_64-linux-gnu -L$SYSROOT/lib ${VDE_LDFLAGS}"  --extra-cflags="${CFLAGS} ${VDE_CFLAGS}"    ${VDE_CONFIG}  --disable-werror --disable-tools --disable-vnc --disable-sdl --disable-gtk --disable-opengl --disable-netmap --disable-nettle --disable-spice --enable-slirp --enable-pixman --disable-download
  LD_LIBRARY_PATH=$SYSROOT/lib  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  LD_LIBRARY_PATH=$SYSROOT/lib  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}
==============================================================================
RTEMS Tools Project <users at rtems.org> Wed Feb 11 03:08:57 2026
==============================================================================
Report: devel/qemu-9.2.4-1.cfg
------------------------------------------------------------------------------
RTEMS Source Builder Repository Status
 Remotes:
[ remotes removed, contact sender for details ]
 Status:
  Clean
 Head:
  Commit: 424f142d70c97ca4e498e58d666d798c9de4a264
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (1) devel/qemu-9.2.4-1.cfg
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Build Set: (2) devel/qemu-9.2.4-1.cfg
------------------------------------------------------------------------------
Package: qemu-9.2.4-x86_64-linux-gnu-1
 Config: devel/qemu-9.2.4-1.cfg
 Summary:
  Qemu is a simulator of various processors.
 URL:
  http://www.qemu.org/
 Version:
  9.2.4
 Release:
  1
  Sources: 1
    1: https://download.qemu.org/qemu-9.2.4.tar.xz
       sha512: WqLqI9I03Ylt5z93je/ek/O0kL0ilHw5YJH90iMc5czRd2fJEBcKlSvoilWTcl8cMbFabRmz0wY3Rl0X+2llHA==
  Patches: 1
    1: https://patchwork.ozlabs.org/patch/406903/raw
       No checksum
 Preparation:
  build_top=$(pwd)
  source_dir_qemu="qemu-9.2.4"
  %setup source qemu -q -n qemu-9.2.4
  %setup patch qemu -p1
  cd ${build_top}
 Build:
  build_top=$(pwd)
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross-build (Xc) if no target or the host and target match.
    # Canadian-cross (Cxc) if build, host and target are all different.
    if test -z "" -o "x86_64-linux-gnu" == "" ; then
      build_dir="build-xc"
    else
      build_dir="build-cxc"
    fi
  else
    build_dir="build"
  fi
  mkdir -p ${build_dir}
  cd ${build_dir}
  # Host and build flags, Cross build if host and build are different and
  # Cxc build if target is deifned and also different.
  # Note, gcc is not ready to be compiled with -std=gnu99 (this needs to be checked).
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
    # Cross build
    CC=$(echo "x86_64-linux-gnu-gcc" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "x86_64-linux-gnu-g++" | sed -e 's,-std=gnu99 ,,')
    CPPFLAGS="${SB_HOST_CPPFLAGS}"
    CFLAGS="${SB_HOST_CFLAGS}"
    CXXFLAGS="${SB_HOST_CXXFLAGS}"
    LDFLAGS="${SB_HOST_LDFLAGS}"
    LDLIBS="${SB_HOST_LIBS}"
    LIBS="${SB_HOST_LIBS}"
    # Host
    CPPFLAGS_FOR_HOST="${SB_HOST_CPPFLAGS}"
    CFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CXXFLAGS}"
    LDFLAGS_FOR_HOST="${SB_HOST_LDFLAGS}"
    LDLIBS_FOR_HOST="${SB_HOST_LIBS}"
    LIBS_FOR_HOST="${SB_HOST_LIBS}"
    CXXFLAGS_FOR_HOST="${SB_HOST_CFLAGS}"
    CC_FOR_HOST=$(echo "gcc ${SB_HOST_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_HOST=$(echo "g++ ${SB_HOST_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    # Build
    CFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CXXFLAGS}"
    LDFLAGS_FOR_BUILD="${SB_BUILD_LDFLAGS}"
    LDLIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    LIBS_FOR_BUILD="${SB_BUILD_LIBS}"
    CXXFLAGS_FOR_BUILD="${SB_BUILD_CFLAGS}"
    CC_FOR_BUILD=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX_FOR_BUILD=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
  else
    LDFLAGS="${SB_BUILD_LDFLAGS}"
    LDLIBS="${SB_BUILD_LIBS}"
    LIBS="${SB_BUILD_LIBS}"
    CC=$(echo "gcc ${SB_BUILD_CFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CXX=$(echo "g++ ${SB_BUILD_CXXFLAGS}" | sed -e 's,-std=gnu99 ,,')
    CC_FOR_BUILD=${CC}
    CXX_FOR_BUILD=${CXX}
  fi
  export CC CXX CPPFLAGS CFLAGS CXXFLAGS LDFLAGS LIBS LDLIBS
  export CC_FOR_HOST CXX_FOR_HOST CPPFLAGS_FOR_HOST CFLAGS_FOR_HOST CXXFLAGS_FOR_HOST LDFLAGS_FOR_HOST LDLIBS_FOR_HOST LIBS_FOR_HOST
  export CC_FOR_BUILD CXX_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD LDFLAGS_FOR_BUILD LDLIBS_FOR_BUILS LIBS_FOR_BUILS
  if test "x86_64-linux-gnu" != "x86_64-linux-gnu" ; then
  CROSS_PREFIX_OPTION="--cross-prefix=x86_64-linux-gnu-"
  fi
  SYSROOT=$SB_TMPPREFIX
  STAGED_GLIB="-I${SB_TMPPREFIX}/include/glib-2.0 -I${SB_TMPPREFIX}/lib/glib-2.0/include"
  STAGED_PIXMAN=" -I${SB_TMPPREFIX}/include/pixman-1"
  STAGED_INCLUDES="${STAGED_GLIB} ${STAGED_PIXMAN}"
  CC="${CC} ${STAGED_INCLUDES}"
  CXX="${CXX} ${STAGED_INCLUDES}"
  PKG_CONFIG_DEFAULT_PATH=${PKG_CONFIG_PATH}  PKG_CONFIG_PATH=$SYSROOT/lib/x86_64-linux-gnu/pkgconfig:$SYSROOT/lib/pkgconfig:$SYSROOT/libdata/pkgconfig  PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT  LD_LIBRARY_PATH=$SYSROOT/lib  ../${source_dir_qemu}/configure  --prefix=/home/tester/rtems-cron-next/tools/7  ${CROSS_PREFIX_OPTION}  --make=make  --extra-ldflags="-Wl,-rpath -Wl,/$SB_PREFIX_CLEAN/lib/:/$SB_PREFIX_CLEAN/lib/x86_64-linux-gnu -L$SYSROOT/lib ${VDE_LDFLAGS}"  --extra-cflags="${CFLAGS} ${VDE_CFLAGS}"    ${VDE_CONFIG}  --disable-werror --disable-tools --disable-vnc --disable-sdl --disable-gtk --disable-opengl --disable-netmap --disable-nettle --disable-spice --enable-slirp --enable-pixman --disable-download
  LD_LIBRARY_PATH=$SYSROOT/lib  make -j 8 all
  cd ${build_top}
 Install:
  build_top=$(pwd)
  /bin/rm -rf $SB_BUILD_ROOT
  cd ${build_dir}
  LD_LIBRARY_PATH=$SYSROOT/lib  make DESTDIR=$SB_BUILD_ROOT install
  cd ${build_top}