[PATCH 2/3] i386: doxygen and comments related to VESA real mode framebuffer
Jan Dolezal
dolezj21 at fel.cvut.cz
Wed Dec 3 23:56:39 UTC 2014
---
c/src/lib/libbsp/i386/pc386/console/fb_vesa_rm.c | 105 ++--
c/src/lib/libbsp/i386/pc386/include/edid.h | 14 +-
c/src/lib/libbsp/i386/pc386/include/fb_vesa.h | 77 +--
c/src/lib/libbsp/i386/pc386/include/tblsizes.h | 1 -
c/src/lib/libbsp/i386/pc386/include/vbe3.h | 694 +++++++++++++--------
.../libbsp/i386/shared/realmode_int/realmode_int.c | 69 +-
.../libbsp/i386/shared/realmode_int/realmode_int.h | 33 +-
c/src/lib/libcpu/i386/cpu.h | 65 +-
cpukit/score/cpu/i386/cpu_asm.S | 4 +-
cpukit/score/cpu/i386/rtems/score/i386.h | 39 +-
10 files changed, 685 insertions(+), 416 deletions(-)
diff --git a/c/src/lib/libbsp/i386/pc386/console/fb_vesa_rm.c b/c/src/lib/libbsp/i386/pc386/console/fb_vesa_rm.c
index e5acbd5..d6fd174 100644
--- a/c/src/lib/libbsp/i386/pc386/console/fb_vesa_rm.c
+++ b/c/src/lib/libbsp/i386/pc386/console/fb_vesa_rm.c
@@ -1,35 +1,39 @@
-/*
- * FB driver for graphic hardware compatible with VESA Bios Extension
- * Real mode interface utilized
- * Tested on real HW.
+/**
+ * @file fb_vesa_rm.c
+ *
+ * @ingroup i386_pc386
+ *
+ * @brief FB driver for graphic hardware compatible with VESA Bios Extension
+ * Real mode interface utilized
+ * Tested on real HW.
*
- * Copyright (c) 2014 - CTU in Prague
- * Jan Doležal ( dolezj21 at fel.cvut.cz )
+ * Public sources related:
+ * - VESA BIOS EXTENSION (VBE) Core Function Standard, Ver: 3.0, Sep 16, 1998
+ * - VESA Enhanced Extended Display Identification Data (E-EDID) Standard
+ * Release A, Revision 2, September 25, 2006
*
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
+ * Hardware is completely initialized upon boot of the system.
+ * Therefore there is no way to change graphics mode later.
*
- * The code for rtems_buffer_* functions were greatly
- * inspired or coppied from:
- * - RTEMS fb_cirrus.c - Alexandru-Sever Horin (alex.sever.h at gmail.com)
+ * Interrupt 0x10 is used for entering graphics BIOS.
*
- * Public sources related:
- * - VESA BIOS EXTENSION (VBE) Core Function Standard, Ver: 3.0, Sep 16, 1998
- * - VESA Enhanced Extended Display Identification Data (E-EDID) Standard
- * Release A, Revision 2, September 25, 2006
+ * Driver reads parameter from multiboot command line to setup video:
+ * "--video=<resX>x<resY>[-<bpp>]"
+ * If cmdline parameter is not specified an attempt for obtaining
+ * resolution from display attached is made.
*/
/*
- * Hardware is completely initialized upon boot of the system.
- * Therefore there is no way to change graphics mode later.
+ * Copyright (c) 2014 - CTU in Prague
+ * Jan Doležal ( dolezj21 at fel.cvut.cz )
*
- * Interrupt 0x10 is used for entering graphics BIOS.
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.org/license/LICENSE.
*
- * Driver reads parameter from multiboot command line to setup video:
- * "--video=<resX>x<resY>[-<bpp>]"
- * If cmdline parameter is not specified an attempt for obtaining
- * resolution from display attached is made.
+ * The code for rtems_buffer_* functions were greatly
+ * inspired or coppied from:
+ * - RTEMS fb_cirrus.c - Alexandru-Sever Horin (alex.sever.h at gmail.com)
*/
#include <bsp.h>
@@ -48,6 +52,13 @@
#define FB_VESA_NAME "FB_VESA_RM"
+/**
+ * @brief Initializes VBE framebuffer during bootup.
+ *
+ * utilizes switches to real mode interrupts and therefore must be
+ * called during bootup before tick is set up and real-time
+ * interrupt vectors utilized
+ */
void vesa_realmode_bootup_init(void);
/* mutex for protection against multiple opens, when called frame_buffer_open */
@@ -187,19 +198,37 @@ uint32_t VBE_read_EDID(uint16_t controller_unit_number,
return (parret.reg_eax & 0xFFFF);
}
+/**
+ * @brief Basic graphic's mode parameters
+ */
typedef struct {
+ /** number of the graphic's mode */
uint16_t mode_number;
+ /** number of pixels in one line */
uint16_t resX;
+ /** number of lines */
uint16_t resY;
+ /** bits per pixel */
uint8_t bpp;
} Mode_params;
-/* finds mode in 'modeList' of 'listLength' length according to resolution
- given in 'searchedResolution'. If bpp is given in that struct as well
- mode with such color depth and resolution is searched for. Otherwise bpp
- has to be zero. Mode number found is returned and also filled into
- 'searchedResolution'. bpp is also filled into 'searchedResolution' if it
- was 0 before call. */
+/**
+ * @brief Find mode by resolution in the given list of modes
+ *
+ * finds mode in \p mode_list of \p list_length length according to resolution
+ * given in \p searched_resolution . If bpp is given in that struct as well
+ * mode with such color depth and resolution is searched for. Otherwise bpp
+ * has to be zero. Mode number found is returned and also filled into
+ * \p searched_resolution . bpp is also filled into \p searchedResolution if it
+ * was 0 before call.
+ *
+ * @param[in] mode_list list of modes to be searched
+ * @param[in] list_length number of modes in the list
+ * @param[in,out] searched_resolution element filled with searched resolution
+ * or/and bpp; mode_number is filled in if appropriate mode found
+ * @retval mode number satisfying given parameters
+ * @retval -1 no suitable mode found
+ */
static uint16_t find_mode_by_resolution(Mode_params *mode_list,
uint8_t list_length,
Mode_params *searched_resolution)
@@ -223,14 +252,18 @@ static uint16_t find_mode_by_resolution(Mode_params *mode_list,
return -1;
}
-/*
- * Parse comandline option "--video=" if available.
+/**
+ * @brief Find mode given within command line.
+ *
+ * Parse command line option "--video=" if available.
* expected format
* --video=<resX>x<resY>[-<bpp>]
* numbers <resX>, <resY> and <bpp> are decadic
*
+ * @param[in] mode_list list of modes to be searched
+ * @param[in] list_length number of modes in the list
* @retval video mode number to be set
- * -1 on parsing error or when no suitable mode found
+ * @retval -1 on parsing error or when no suitable mode found
*/
static uint16_t find_mode_using_cmdline(Mode_params *mode_list,
uint8_t list_length)
@@ -278,11 +311,13 @@ static uint16_t find_mode_using_cmdline(Mode_params *mode_list,
return -1;
}
-/*
- * returns mode number best fitting to monitor attached
+/**
+ * @brief Find mode number best fitting to monitor attached
*
+ * @param[in] mode_list list of modes to be searched
+ * @param[in] list_length number of modes in the list
* @retval video mode number to be set
- * -1 on parsing error or when no suitable mode found
+ * @retval -1 on parsing error or when no suitable mode found
*/
static uint16_t find_mode_using_EDID( Mode_params *mode_list,
uint8_t list_length)
diff --git a/c/src/lib/libbsp/i386/pc386/include/edid.h b/c/src/lib/libbsp/i386/pc386/include/edid.h
index fe6d7da..1120296 100644
--- a/c/src/lib/libbsp/i386/pc386/include/edid.h
+++ b/c/src/lib/libbsp/i386/pc386/include/edid.h
@@ -4,16 +4,16 @@
* @ingroup i386_pc386
*
* @brief VESA EDID definitions.
+ *
+ * This file contains definitions for constants related to
+ * VESA Extended Display Identification Data.
+ * More information can be found at
+ * <http://www.vesa.org/vesa-standards/free-standards/>
+ * VESA public standards may be found at
+ * <http://www.vesa.org/wp-content/uploads/2010/12/thankspublic.htm>
*/
/*
- * edid.h - This file contains definitions for constants related to
- * VESA Extended Display Identification Data.
- * More information can be found at
- * <http://www.vesa.org/vesa-standards/free-standards/>
- * VESA public standards may be found at
- * <http://www.vesa.org/wp-content/uploads/2010/12/thankspublic.htm>
- *
* Copyright (C) 2014 Jan Doležal (dolezj21 at fel.cvut.cz)
* CTU in Prague.
*
diff --git a/c/src/lib/libbsp/i386/pc386/include/fb_vesa.h b/c/src/lib/libbsp/i386/pc386/include/fb_vesa.h
index b82d3e7..d8bfd1b 100644
--- a/c/src/lib/libbsp/i386/pc386/include/fb_vesa.h
+++ b/c/src/lib/libbsp/i386/pc386/include/fb_vesa.h
@@ -3,12 +3,10 @@
*
* @ingroup i386_pc386
*
- * @brief Definitioins for vesa based framebuffer drivers.
+ * @brief Headers specific for framebuffer drivers utilizing VESA VBE.
*/
/*
- * Headers specific for framebuffer drivers utilizing VESA VBE.
- *
* Copyright (C) 2014 Jan Doležal (dolezj21 at fel.cvut.cz)
* CTU in Prague.
*
@@ -35,15 +33,16 @@ extern "C" {
/* ----- Prototypes ----- */
/**
- * Returns information about graphic's controller in the infoBlock structure.
+ * @brief Returns information about graphic's controller in the \p info_block
+ * structure.
*
- * @param infoBlock pointer to the struct to be filled with
- controller information
- * @param queriedVBEVersion if >0x200 then video bios is asked to fill in
+ * @param[out] info_block pointer to the struct to be filled with
+ * controller information
+ * @param[in] queried_VBE_Version if >0x200 then video bios is asked to fill in
* parameters which appeared with second version
* of VBE.
- * @retval register ax content as defined in VBE RETURN STATUS paragraph
- * -1 error calling graphical bios
+ * @retval ax register content as defined in VBE RETURN STATUS paragraph
+ * @retval -1 error calling graphical bios
*/
uint32_t VBE_controller_information (
VBE_vbe_info_block *info_block,
@@ -51,13 +50,14 @@ uint32_t VBE_controller_information (
);
/**
- * Fills structure infoBlock with informations about selected mode in
- * modeNumber variable.
+ * @brief Fills structure \p info_block with informations about selected mode in
+ * \p mode_number variable.
*
- * @param infoBlock pointer to the struct to be filled with mode information
- * @param modeNumber detailes of this mode to be filled
- * @retval register ax content as defined in VBE RETURN STATUS paragraph
- * -1 error calling graphical bios
+ * @param[out] info_block pointer to the struct to be filled with
+ * mode information
+ * @param[in] mode_number detailes of this mode to be filled
+ * @retval ax register content as defined in VBE RETURN STATUS paragraph
+ * @retval -1 error calling graphical bios
*/
uint32_t VBE_mode_information (
VBE_mode_info_block *info_block,
@@ -65,13 +65,13 @@ uint32_t VBE_mode_information (
);
/**
- * Sets graphics mode selected. If mode has refreshRateCtrl bit set, than the
- * infoBlock must be filled accordingly.
+ * @brief Sets graphics mode selected. If mode has refreshRateCtrl bit set, than
+ * the \p info_block must be filled accordingly.
*
- * @param modeNumber number of mode to be set
- * @param infoBlock pointer to struct containing refresh rate control info
- * @retval register ax content as defined in VBE RETURN STATUS paragraph
- * -1 error calling graphical bios
+ * @param[in] mode_number number of mode to be set
+ * @param[in] info_block pointer to struct containing refresh rate control info
+ * @retval ax register content as defined in VBE RETURN STATUS paragraph
+ * @retval -1 error calling graphical bios
*/
uint32_t VBE_set_mode (
uint16_t mode_number,
@@ -79,27 +79,27 @@ uint32_t VBE_set_mode (
);
/**
- * Get currently set mode number.
+ * @brief Get currently set mode number.
*
- * @param modeNumber variable to be filled with current mode number
- * @retval register ax content as defined in VBE RETURN STATUS paragraph
- * -1 error calling graphical bios
+ * @param[out] mode_number variable to be filled with current mode number
+ * @retval ax register content as defined in VBE RETURN STATUS paragraph
+ * @retval -1 error calling graphical bios
*/
uint32_t VBE_current_mode (
uint16_t *mode_number
);
/**
- * Gets information about display data channel implemented in the
+ * @brief Gets information about display data channel implemented in the
* graphic's controller.
*
- * @param controllerUnitNumber
- * @param secondsToTransferEDIDBlock approximate time to transfer one EDID block
- * rounded up to seconds
- * @param DDCLevelSupported after call contains DDC version supported and
+ * @param[in] controller_unit_number
+ * @param[out] seconds_to_transfer_EDID_block approximate time to transfer one
+ * EDID block rounded up to seconds
+ * @param[out] DDC_level_supported contains DDC version supported and
* screen blanking state during transfer
- * @retval register ax content as defined in VBE RETURN STATUS paragraph
- * -1 error calling graphical bios
+ * @retval ax register content as defined in VBE RETURN STATUS paragraph
+ * @retval -1 error calling graphical bios
*/
uint32_t VBE_report_DDC_capabilities (
uint16_t controller_unit_number,
@@ -108,13 +108,14 @@ uint32_t VBE_report_DDC_capabilities (
);
/**
- * Reads selected EDID block from display attached to controller's interface.
+ * @brief Reads selected EDID block from display attached to controller's
+ * interface.
*
- * @param controllerUnitNumber
- * @param EDIDBlockNumber block no. to be read from the display
- * @param buffer place to store block fetched from the display
- * @retval register ax content as defined in VBE RETURN STATUS paragraph
- * -1 error calling graphical bios
+ * @param[in] controller_unit_number
+ * @param[in] EDID_block_number block no. to be read from the display
+ * @param[out] buffer place to store block fetched from the display
+ * @retval ax register content as defined in VBE RETURN STATUS paragraph
+ * @retval -1 error calling graphical bios
*/
uint32_t VBE_read_EDID (
uint16_t controller_unit_number,
diff --git a/c/src/lib/libbsp/i386/pc386/include/tblsizes.h b/c/src/lib/libbsp/i386/pc386/include/tblsizes.h
index 6128d87..bd4e989 100644
--- a/c/src/lib/libbsp/i386/pc386/include/tblsizes.h
+++ b/c/src/lib/libbsp/i386/pc386/include/tblsizes.h
@@ -7,7 +7,6 @@
*/
/*
- * Definitions related to the PC386 BSP.
* This header file is also used in assembler modules.
*
* Copyright (C) 2014 Jan Doležal (dolezj21 at fel.cvut.cz)
diff --git a/c/src/lib/libbsp/i386/pc386/include/vbe3.h b/c/src/lib/libbsp/i386/pc386/include/vbe3.h
index 811fc3d..06f614f 100644
--- a/c/src/lib/libbsp/i386/pc386/include/vbe3.h
+++ b/c/src/lib/libbsp/i386/pc386/include/vbe3.h
@@ -4,15 +4,15 @@
* @ingroup i386_pc386
*
* @brief VESA Bios Extension definitions.
+ *
+ * This file contains definitions for constants related to VBE.
+ * More information can be found at
+ * <http://www.vesa.org/vesa-standards/free-standards/>.
+ * VESA public standards may be found at
+ * <http://www.vesa.org/wp-content/uploads/2010/12/thankspublic.htm>.
*/
/*
- * vbe3.h - This file contains definitions for constants related to VBE.
- * More information can be found at
- * <http://www.vesa.org/vesa-standards/free-standards/>
- * VESA public standards may be found at
- * <http://www.vesa.org/wp-content/uploads/2010/12/thankspublic.htm>
- *
* Copyright (C) 2014 Jan Doležal (dolezj21 at fel.cvut.cz)
* CTU in Prague.
*
@@ -37,343 +37,484 @@ extern "C" {
/* VESA BIOS EXTENSION (VBE) Core functions Standard
Version: 3.0 Date: September 16, 1998 */
-/* VBE RETURN STATUS */
-/* AL == 4Fh: Function is supported */
-/* AL != 4Fh: Function is not supported */
+/** AL == 4Fh: Function is supported \n
+ * AL != 4Fh: Function is not supported */
#define VBE_functionSupported 0x4F
-/* AH == 00h: Function call successful */
+/** AH == 00h: Function call successful */
#define VBE_callSuccessful 0x00
-/* AH == 01h: Function call failed */
+/** AH == 01h: Function call failed */
#define VBE_callFailed 0x01
-/* AH == 02h: Function is not supported in the current hardware configuration */
+/** AH == 02h: Function is not supported in the current hardware configuration*/
#define VBE_notSupportedInCurHWConf 0x02
-/* AH == 03h: Function call invalid in current video mode */
+/** AH == 03h: Function call invalid in current video mode */
#define VBE_callInvalid 0x03
/* VBE Mode Numbers */
-/* D0-D8 = Mode number */
+/** D0-D8 = Mode number */
#define VBE_modeNumberMask 0x01FF
#define VBE_modeNumberShift 0x00
-/* If D8 == 0, this is not a VESA defined VBE mode */
+/** If D8 == 0, this is not a VESA defined VBE mode \n
+ If D8 == 1, this is a VESA defined VBE mode */
#define VBE_VESAmodeMask 0x0100
-/* If D8 == 1, this is a VESA defined VBE mode */
-/* D9-D12 = Reserved by VESA for future expansion (= 0) */
#define VBE_VESAmodeShift 0x08
-/* If D11 == 0, Use current BIOS default refresh rate */
+/* D9-D10 = Reserved by VESA for future expansion (= 0) */
+/** If D11 == 0, Use current BIOS default refresh rate \n
+ If D11 == 1, Use user specified CRTC values for refresh rate */
#define VBE_refreshRateCtrlMask 0x0800
-/* If D11 == 1, Use user specified CRTC values for refresh rate */
-/* D12-13 = Reserved for VBE/AF (must be 0) */
#define VBE_refreshRateCtrlShift 0x0B
-/* If D14 == 0, Use Banked/Windowed Frame Buffer */
+/* D12-13 = Reserved for VBE/AF (must be 0) */
+/** If D14 == 0, Use Banked/Windowed Frame Buffer \n
+ If D14 == 1, Use Linear/Flat Frame Buffer */
#define VBE_linearFlatFrameBufMask 0x4000
-/* If D14 == 1, Use Linear/Flat Frame Buffer */
#define VBE_linearFlatFrameBufShift 0x0E
-/* If D15 == 0, Clear display memory */
+/** If D15 == 0, Clear display memory \n
+ If D15 == 1, Preserve display memory */
#define VBE_preserveDispMemMask 0x8000
-/* If D15 == 1, Preserve display memory */
#define VBE_preserveDispMemShift 0x0F
/* Graphics modes */
-/* 15-bit mode, Resolution: 640x400, Colors: 256 */
+/** 15-bit mode, Resolution: 640x400, Colors: 256 */
#define VBE_R640x400C256 0x100
-/* 15-bit mode, Resolution: 640x480, Colors: 256 */
+/** 15-bit mode, Resolution: 640x480, Colors: 256 */
#define VBE_R640x480C256 0x101
-/* 15-bit mode, Resolution: 800x600, Colors: 16 */
+/** 15-bit mode, Resolution: 800x600, Colors: 16 */
#define VBE_R800x600C16 0x102
-/* 7-bit mode, Resolution: 800x600, Colors: 16 */
+/** 7-bit mode, Resolution: 800x600, Colors: 16 */
#define VBE_b7R800x600C16 0x6A
-/* 15-bit mode, Resolution: 800x600, Colors: 256 */
+/** 15-bit mode, Resolution: 800x600, Colors: 256 */
#define VBE_R800x600C256 0x103
-/* 15-bit mode, Resolution: 1024x768, Colors: 16 */
+/** 15-bit mode, Resolution: 1024x768, Colors: 16 */
#define VBE_R1024x768C16 0x104
-/* 15-bit mode, Resolution: 1024x768, Colors: 256 */
+/** 15-bit mode, Resolution: 1024x768, Colors: 256 */
#define VBE_R1024x768C256 0x105
-/* 15-bit mode, Resolution: 1280x1024, Colors: 16 */
+/** 15-bit mode, Resolution: 1280x1024, Colors: 16 */
#define VBE_R1280x1024C16 0x106
-/* 15-bit mode, Resolution: 1280x1024, Colors: 256 */
+/** 15-bit mode, Resolution: 1280x1024, Colors: 256 */
#define VBE_R1280x1024C256 0x107
-/* 15-bit mode, Resolution: 320x200, Colors: 32K (1:5:5:5) */
+/** 15-bit mode, Resolution: 320x200, Colors: 32K (1:5:5:5) */
#define VBE_R320x200C32K 0x10D
-/* 15-bit mode, Resolution: 320x200, Colors: 64K (5:6:5) */
+/** 15-bit mode, Resolution: 320x200, Colors: 64K (5:6:5) */
#define VBE_R320x200C64K 0x10E
-/* 15-bit mode, Resolution: 320x200, Colors: 16.8M (8:8:8) */
+/** 15-bit mode, Resolution: 320x200, Colors: 16.8M (8:8:8) */
#define VBE_R320x200C17M 0x10F
-/* 15-bit mode, Resolution: 640x480, Colors: 32K (1:5:5:5) */
+/** 15-bit mode, Resolution: 640x480, Colors: 32K (1:5:5:5) */
#define VBE_R640x480C32K 0x110
-/* 15-bit mode, Resolution: 640x480, Colors: 64K (5:6:5) */
+/** 15-bit mode, Resolution: 640x480, Colors: 64K (5:6:5) */
#define VBE_R640x480C64K 0x111
-/* 15-bit mode, Resolution: 640x480, Colors: 16.8M (8:8:8) */
+/** 15-bit mode, Resolution: 640x480, Colors: 16.8M (8:8:8) */
#define VBE_R640x480C17M 0x112
-/* 15-bit mode, Resolution: 800x600, Colors: 32K (1:5:5:5) */
+/** 15-bit mode, Resolution: 800x600, Colors: 32K (1:5:5:5) */
#define VBE_R800x600C32K 0x113
-/* 15-bit mode, Resolution: 800x600, Colors: 64K (5:6:5) */
+/** 15-bit mode, Resolution: 800x600, Colors: 64K (5:6:5) */
#define VBE_R800x600C64K 0x114
-/* 15-bit mode, Resolution: 800x600, Colors: 16.8M (8:8:8) */
+/** 15-bit mode, Resolution: 800x600, Colors: 16.8M (8:8:8) */
#define VBE_R800x600C17M 0x115
-/* 15-bit mode, Resolution: 1024x768, Colors: 32K (1:5:5:5) */
+/** 15-bit mode, Resolution: 1024x768, Colors: 32K (1:5:5:5) */
#define VBE_R1024x768C32K 0x116
-/* 15-bit mode, Resolution: 1024x768, Colors: 64K (5:6:5) */
+/** 15-bit mode, Resolution: 1024x768, Colors: 64K (5:6:5) */
#define VBE_R1024x768C64K 0x117
-/* 15-bit mode, Resolution: 1024x768, Colors: 16.8M (8:8:8) */
+/** 15-bit mode, Resolution: 1024x768, Colors: 16.8M (8:8:8) */
#define VBE_R1024x768C17M 0x118
-/* 15-bit mode, Resolution: 1280x1024, Colors: 32K (1:5:5:5) */
+/** 15-bit mode, Resolution: 1280x1024, Colors: 32K (1:5:5:5) */
#define VBE_R1280x1024C32K 0x119
-/* 15-bit mode, Resolution: 1280x1024, Colors: 64K (5:6:5) */
+/** 15-bit mode, Resolution: 1280x1024, Colors: 64K (5:6:5) */
#define VBE_R1280x1024C64K 0x11A
-/* 15-bit mode, Resolution: 1280x1024, Colors: 16.8M (8:8:8) */
+/** 15-bit mode, Resolution: 1280x1024, Colors: 16.8M (8:8:8) */
#define VBE_R1280x1024C17M 0x11B
#define VBE_SpecialMode 0x81FF
/* Text modes */
-#define VBE_C80R60 0x108 /* 15-bit mode, Columns: 80, Rows: 60 */
-#define VBE_C132R25 0x109 /* 15-bit mode, Columns: 132, Rows: 25 */
-#define VBE_C132R43 0x10A /* 15-bit mode, Columns: 132, Rows: 43 */
-#define VBE_C132R50 0x10B /* 15-bit mode, Columns: 132, Rows: 50 */
-#define VBE_C132R60 0x10C /* 15-bit mode, Columns: 132, Rows: 60 */
+#define VBE_C80R60 0x108 /**< 15-bit mode, Columns: 80, Rows: 60 */
+#define VBE_C132R25 0x109 /**< 15-bit mode, Columns: 132, Rows: 25 */
+#define VBE_C132R43 0x10A /**< 15-bit mode, Columns: 132, Rows: 43 */
+#define VBE_C132R50 0x10B /**< 15-bit mode, Columns: 132, Rows: 50 */
+#define VBE_C132R60 0x10C /**< 15-bit mode, Columns: 132, Rows: 60 */
/* VBE function numbers - passed in AX register */
-#define VBE_RetVBEConInf 0x4F00 /* Return VBE Controller Information */
-#define VBE_RetVBEModInf 0x4F01 /* Return VBE Mode Information */
-#define VBE_SetVBEMod 0x4F02 /* Set VBE Mode */
-#define VBE_RetCurVBEMod 0x4F03 /* Return Current VBE Mode */
-#define VBE_SavResSta 0x4F04 /* Save/Restore State */
-#define VBE_DisWinCon 0x4F05 /* Display Window Control */
-#define VBE_SetGetLogScaLinLen 0x4F06 /* Set/Get Logical Scan Line Length */
-#define VBE_SetGetDisSta 0x4F07 /* Set/Get Display Start */
-#define VBE_SetGetDACPalFor 0x4F08 /* Set/Get DAC Palette Format */
-#define VBE_SetGetPalDat 0x4F09 /* Set/Get Palette Data */
-#define VBE_RetVBEProModInt 0x4F0A /* Return VBE Protected Mode Interface */
-#define VBE_GetSetpixclo 0x4F0B /* Get/Set pixel clock */
-#define VBE_PowManExt 0x4F10 /* Power Management Extensions (PM) */
-#define VBE_FlaPanIntExt 0x4F11 /* Flat Panel Interface Extensions (FP) */
-#define VBE_AudIntExt 0x4F13 /* Audio Interface Extensions (AI) */
-#define VBE_OEMExt 0x4F14 /* OEM Extensions */
-#define VBE_DisDatCha 0x4F15 /* Display Data Channel (DDC),
- Serial Control Interface (SCI) */
+/** VBE function - Return VBE Controller Information */
+#define VBE_RetVBEConInf 0x4F00
+/** VBE function - Return VBE Mode Information */
+#define VBE_RetVBEModInf 0x4F01
+/** VBE function - Set VBE Mode */
+#define VBE_SetVBEMod 0x4F02
+/** VBE function - Return Current VBE Mode */
+#define VBE_RetCurVBEMod 0x4F03
+/** VBE function - Save/Restore State */
+#define VBE_SavResSta 0x4F04
+/** VBE function - Display Window Control */
+#define VBE_DisWinCon 0x4F05
+/** VBE function - Set/Get Logical Scan Line Length */
+#define VBE_SetGetLogScaLinLen 0x4F06
+/** VBE function - Set/Get Display Start */
+#define VBE_SetGetDisSta 0x4F07
+/** VBE function - Set/Get DAC Palette Format */
+#define VBE_SetGetDACPalFor 0x4F08
+/** VBE function - Set/Get Palette Data */
+#define VBE_SetGetPalDat 0x4F09
+/** VBE function - Return VBE Protected Mode Interface */
+#define VBE_RetVBEProModInt 0x4F0A
+/** VBE function - Get/Set pixel clock */
+#define VBE_GetSetpixclo 0x4F0B
+/** VBE function - Power Management Extensions (PM) */
+#define VBE_PowManExt 0x4F10
+/** VBE function - Flat Panel Interface Extensions (FP) */
+#define VBE_FlaPanIntExt 0x4F11
+/** VBE function - Audio Interface Extensions (AI) */
+#define VBE_AudIntExt 0x4F13
+/** VBE function - OEM Extensions */
+#define VBE_OEMExt 0x4F14
+/** VBE function - Display Data Channel (DDC), Serial Control Interface (SCI) */
+#define VBE_DisDatCha 0x4F15
/* VBE subfunction numbers - passed in BL register */
-#define VBE_RetVBESupSpeInf 0x00 /* Return VBE Supplemental
- Specification Information */
+#define VBE_RetVBESupSpeInf 0x00 /**< Return VBE Supplemental
+ * Specification Information */
/* *** Structures *** */
+/**
+ * @brief Far pointer as defined by VBE standard.
+ */
typedef struct {
+ /** @brief Offset to segment described by \a selector. */
uint16_t offset;
+ /** @brief Selector or Segment depending on whether this is used from 16bit
+ protected mode or from real mode. */
uint16_t selector;
} RTEMS_COMPILER_PACKED_ATTRIBUTE VBE_far_pointer;
+/**
+ * @brief Protected mode info block as defined by VBE standard.
+ */
typedef struct {
- uint8_t Signature[4]; /* PM Info Block Signature */
- uint16_t EntryPoint; /* Offset of PM entry point within BIOS */
- uint16_t PMInitialize; /* Offset of PM initialization entry point */
- uint16_t BIOSDataSel; /* Selector to BIOS data area emulation block */
- uint16_t A0000Sel; /* Selector to access A0000h physical mem */
- uint16_t B0000Sel; /* Selector to access B0000h physical mem */
- uint16_t B8000Sel; /* Selector to access B8000h physical mem */
- uint16_t CodeSegSel; /* Selector to access code segment as data */
- uint8_t InProtectMode; /* Set to 1 when in protected mode */
- uint8_t Checksum; /* Checksum byte for structure */
+ /** PM Info Block Signature */
+ uint8_t Signature[4];
+ /** Offset of PM entry point within BIOS */
+ uint16_t EntryPoint;
+ /** Offset of PM initialization entry point */
+ uint16_t PMInitialize;
+ /** Selector to BIOS data area emulation block */
+ uint16_t BIOSDataSel;
+ /** Selector to access A0000h physical memmory */
+ uint16_t A0000Sel;
+ /** Selector to access B0000h physical memmory */
+ uint16_t B0000Sel;
+ /** Selector to access B8000h physical memmory */
+ uint16_t B8000Sel;
+ /** Selector to access code segment as data */
+ uint16_t CodeSegSel;
+ /** Set to 1 when in protected mode */
+ uint8_t InProtectMode;
+ /** Checksum byte for structure. Sum over all structure bytes gives 0. */
+ uint8_t Checksum;
} RTEMS_COMPILER_PACKED_ATTRIBUTE VBE_protected_mode_info_block;
-/* General VBE signature */
+/** General VBE signature */
#define VBE_SIGNATURE "VESA"
-/* Signature for VBE 2.0 and higher */
+/** Signature for VBE 2.0 and higher */
#define VBE20plus_SIGNATURE "VBE2"
-/* for STUB see VBE CORE FUNCTIONS VERSION 3.0 - Appendix 1 */
-#define VBE_END_OF_VideoModeList 0xFFFF
+/** for STUB see VBE CORE FUNCTIONS VERSION 3.0 - Appendix 1 */
#define VBE_STUB_VideoModeList 0xFFFF
+#define VBE_END_OF_VideoModeList 0xFFFF
+/**
+ * @brief Information about VBE implementation.
+ */
typedef struct {
- uint8_t VbeSignature[4]; /* VBE Signature */
- uint16_t VbeVersion; /* VBE Version */
- uint8_t *OemStringPtr; /* VbeFarPtr to OEM String */
- uint8_t Capabilities[4]; /* Capabilities of graphics controller */
- uint32_t *VideoModePtr; /* VbeFarPtr to VideoModeList */
- uint16_t TotalMemory; /* Number of 64kb memory blocks */
+ /** VBE Signature */
+ uint8_t VbeSignature[4];
+ /** VBE Version */
+ uint16_t VbeVersion;
+ /** VBE_far_pointer to OEM String */
+ uint8_t *OemStringPtr;
+ /** Capabilities of graphics controller */
+ uint8_t Capabilities[4];
+ /** VBE_far_pointer to VideoModeList */
+ uint32_t *VideoModePtr;
+ /** Number of 64kb memory blocks */
+ uint16_t TotalMemory;
/* Added for VBE 2.0+ */
- uint16_t OemSoftwareRev; /* VBE implementation Software revision */
- uint8_t *OemVendorNamePtr; /* VbeFarPtr to Vendor Name String */
- uint8_t *OemProductNamePtr; /* VbeFarPtr to Product Name String */
- uint8_t *OemProductRevPtr; /* VbeFarPtr to Product Revision String */
- uint8_t Reserved[222]; /* Reserved for VBE implementation scratch */
- /* area */
- uint8_t OemData[256]; /* Data Area for OEM Strings */
+ /** VBE implementation Software revision */
+ uint16_t OemSoftwareRev;
+ /** VBE_far_pointer to Vendor Name String */
+ uint8_t *OemVendorNamePtr;
+ /** VBE_far_pointer to Product Name String */
+ uint8_t *OemProductNamePtr;
+ /** VBE_far_pointer to Product Revision String */
+ uint8_t *OemProductRevPtr;
+ /** Reserved for VBE implementation scratch */
+ uint8_t Reserved[222];
+ /** Data Area for OEM Strings */
+ uint8_t OemData[256];
} RTEMS_COMPILER_PACKED_ATTRIBUTE VBE_vbe_info_block;
+/**
+ * @brief Describes graphic's mode parameter.
+ */
typedef struct {
/* Mandatory information for all VBE revisions */
- uint16_t ModeAttributes; /* mode attributes */
- uint8_t WinAAttributes; /* window A attributes */
- uint8_t WinBAttributes; /* window B attributes */
- uint16_t WinGranularity; /* window granularity */
- uint16_t WinSize; /* window size */
- uint16_t WinASegment; /* window A start segment */
- uint16_t WinBSegment; /* window B start segment */
- uint32_t *WinFuncPtr; /* real mode pointer to window function */
- uint16_t BytesPerScanLine; /* bytes per scan line */
+ /** mode attributes */
+ uint16_t ModeAttributes;
+ /** window A attributes */
+ uint8_t WinAAttributes;
+ /** window B attributes */
+ uint8_t WinBAttributes;
+ /** window granularity */
+ uint16_t WinGranularity;
+ /** window size */
+ uint16_t WinSize;
+ /** window A start segment */
+ uint16_t WinASegment;
+ /** window B start segment */
+ uint16_t WinBSegment;
+ /** real mode pointer to window function */
+ uint32_t *WinFuncPtr;
+ /** bytes per scan line */
+ uint16_t BytesPerScanLine;
/* Mandatory information for VBE 1.2 and above */
- uint16_t XResolution; /* horizontal resolution in px or chars */
- uint16_t YResolution; /* vertical resolution in px or chars */
- uint8_t XCharSize; /* character cell width in pixels */
- uint8_t YCharSize; /* character cell height in pixels */
- uint8_t NumberOfPlanes; /* number of memory planes */
- uint8_t BitsPerPixel; /* bits per pixel */
- uint8_t NumberOfBanks; /* number of banks */
- uint8_t MemoryModel; /* memory model type */
- uint8_t BankSize; /* bank size in KB */
- uint8_t NumberOfImagePages; /* number of images */
- uint8_t Reserved0; /* reserved for page function */
+ /** horizontal resolution in px or chars */
+ uint16_t XResolution;
+ /** vertical resolution in px or chars */
+ uint16_t YResolution;
+ /** character cell width in pixels */
+ uint8_t XCharSize;
+ /** character cell height in pixels */
+ uint8_t YCharSize;
+ /** number of memory planes */
+ uint8_t NumberOfPlanes;
+ /** bits per pixel */
+ uint8_t BitsPerPixel;
+ /** number of banks */
+ uint8_t NumberOfBanks;
+ /** memory model type */
+ uint8_t MemoryModel;
+ /** bank size in KB */
+ uint8_t BankSize;
+ /** number of images */
+ uint8_t NumberOfImagePages;
+ /** reserved for page function */
+ uint8_t Reserved0;
/* Direct Color fields (required for direct/6 and YUV/7 memory models) */
- uint8_t RedMaskSize; /* size of direct color red mask in bits */
- uint8_t RedFieldPosition; /* bit position of lsb of red mask */
- uint8_t GreenMaskSize; /* size of direct color green mask in b */
- uint8_t GreenFieldPosition; /* bit position of lsb of green mask */
- uint8_t BlueMaskSize; /* size of direct color blue mask in b */
- uint8_t BlueFieldPosition; /* bit position of lsb of blue mask */
- uint8_t RsvdMaskSize; /* size of direct color reserved mask */
- uint8_t RsvdFieldPosition; /* bit position of lsb of reserved mask */
- uint8_t DirectColorModeInfo; /* direct color mode attributes */
+ /** size of direct color red mask in bits */
+ uint8_t RedMaskSize;
+ /** bit position of lsb of red mask */
+ uint8_t RedFieldPosition;
+ /** size of direct color green mask in b */
+ uint8_t GreenMaskSize;
+ /** bit position of lsb of green mask */
+ uint8_t GreenFieldPosition;
+ /** size of direct color blue mask in b */
+ uint8_t BlueMaskSize;
+ /** bit position of lsb of blue mask */
+ uint8_t BlueFieldPosition;
+ /** size of direct color reserved mask */
+ uint8_t RsvdMaskSize;
+ /** bit position of lsb of reserved mask */
+ uint8_t RsvdFieldPosition;
+ /** direct color mode attributes */
+ uint8_t DirectColorModeInfo;
/* Mandatory information for VBE 2.0 and above */
- uint32_t *PhysBasePtr; /* physical address for
- flat memory frame buffer */
- uint32_t Reserved1; /* Reserved - always set to 0 */
- uint16_t Reserved2; /* Reserved - always set to 0 */
+ /** physical address for flat memory frame buffer */
+ uint32_t *PhysBasePtr;
+ /** Reserved - always set to 0 */
+ uint32_t Reserved1;
+ /** Reserved - always set to 0 */
+ uint16_t Reserved2;
/* Mandatory information for VBE 3.0 and above */
- uint16_t LinBytesPerScanLine; /* bytes per scan line for linear modes */
- uint8_t BnkNumberOfImagePages; /* number of images for banked modes */
- uint8_t LinNumberOfImagePages; /* number of images for linear modes */
+ /** bytes per scan line for linear modes */
+ uint16_t LinBytesPerScanLine;
+ /** number of images for banked modes */
+ uint8_t BnkNumberOfImagePages;
+ /** number of images for linear modes */
+ uint8_t LinNumberOfImagePages;
/* linear modes */
- uint8_t LinRedMaskSize; /* size of direct color red mask */
- uint8_t LinRedFieldPosition; /* bit position of lsb of red mask */
- uint8_t LinGreenMaskSize; /* size of direct color green mask */
- uint8_t LinGreenFieldPosition; /* bit position of lsb of green mask */
- uint8_t LinBlueMaskSize; /* size of direct color blue mask */
- uint8_t LinBlueFieldPosition; /* bit position of lsb of blue mask */
- uint8_t LinRsvdMaskSize; /* size of direct color reserved mask */
- uint8_t LinRsvdFieldPosition; /* bit position of lsb of reserved mask */
- uint32_t MaxPixelClock; /* maximum pixel clock
- (in Hz) for graphics mode */
- uint8_t Reserved3[189]; /* remainder of ModeInfoBlock */
+ /** size of direct color red mask */
+ uint8_t LinRedMaskSize;
+ /** bit position of lsb of red mask */
+ uint8_t LinRedFieldPosition;
+ /** size of direct color green mask */
+ uint8_t LinGreenMaskSize;
+ /** bit position of lsb of green mask */
+ uint8_t LinGreenFieldPosition;
+ /** size of direct color blue mask */
+ uint8_t LinBlueMaskSize;
+ /** bit position of lsb of blue mask */
+ uint8_t LinBlueFieldPosition;
+ /** size of direct color reserved mask */
+ uint8_t LinRsvdMaskSize;
+ /** bit position of lsb of reserved mask */
+ uint8_t LinRsvdFieldPosition;
+ /** maximum pixel clock (in Hz) for graphics mode */
+ uint32_t MaxPixelClock;
+ /** remainder of VBE_mode_info_block */
+ uint8_t Reserved3[189];
} RTEMS_COMPILER_PACKED_ATTRIBUTE VBE_mode_info_block;
+/**
+ * @brief Describes monitor synchronization.
+ */
typedef struct {
- uint16_t HorizontalTotal; /* Horizontal total in pixels */
- uint16_t HorizontalSyncStart; /* Horizontal sync start in pixels */
- uint16_t HorizontalSyncEnd; /* Horizontal sync end in pixels */
- uint16_t VerticalTotal; /* Vertical total in lines */
- uint16_t VerticalSyncStart; /* Vertical sync start in lines */
- uint16_t VerticalSyncEnd; /* Vertical sync end in lines */
- uint8_t Flags; /* Flags (Interlaced, Double Scan etc) */
- uint32_t PixelClock; /* Pixel clock in units of Hz */
- uint16_t RefreshRate; /* Refresh rate in units of 0.01 Hz */
- uint8_t Reserved[40]; /* remainder of ModeInfoBlock */
+ /** Horizontal total in pixels */
+ uint16_t HorizontalTotal;
+ /** Horizontal sync start in pixels */
+ uint16_t HorizontalSyncStart;
+ /** Horizontal sync end in pixels */
+ uint16_t HorizontalSyncEnd;
+ /** Vertical total in lines */
+ uint16_t VerticalTotal;
+ /** Vertical sync start in lines */
+ uint16_t VerticalSyncStart;
+ /** Vertical sync end in lines */
+ uint16_t VerticalSyncEnd;
+ /** Flags (Interlaced, Double Scan etc) */
+ uint8_t Flags;
+ /** Pixel clock in units of Hz */
+ uint32_t PixelClock;
+ /** Refresh rate in units of 0.01 Hz */
+ uint16_t RefreshRate;
+ /** remainder of VBE_mode_info_block */
+ uint8_t Reserved[40];
} RTEMS_COMPILER_PACKED_ATTRIBUTE VBE_CRTC_info_block;
+/**
+ * @brief Describes palette entry.
+ */
typedef struct {
- uint8_t Blue; /* Blue channel value (6 or 8 bits) */
- uint8_t Green; /* Green channel value (6 or 8 bits) */
- uint8_t Red; /* Red channel value(6 or 8 bits) */
- uint8_t Alignment; /* DWORD alignment byte (unused) */
+ /** Blue channel value (6 or 8 bits) */
+ uint8_t Blue;
+ /** Green channel value (6 or 8 bits) */
+ uint8_t Green;
+ /** Red channel value(6 or 8 bits) */
+ uint8_t Red;
+ /** DWORD alignment byte (unused) */
+ uint8_t Alignment;
} RTEMS_COMPILER_PACKED_ATTRIBUTE VBE_palette_entry;
+/**
+ * @brief Supplemental VBE info block.
+ */
typedef struct {
- uint8_t SupVbeSignature[7]; /* Supplemental VBE Signature */
- uint16_t SupVbeVersion; /* Supplemental VBE Version */
- uint8_t SupVbeSubFunc[8]; /* Bitfield of supported subfunctions */
- uint16_t OemSoftwareRev; /* OEM Software revision */
- uint8_t *OemVendorNamePtr; /* VbeFarPtr to Vendor Name String */
- uint8_t *OemProductNamePtr; /* VbeFarPtr to Product Name String */
- uint8_t *OemProductRevPtr; /* VbeFarPtr to Product Revision String */
- uint8_t *OemStringPtr; /* VbeFarPtr to OEM String */
- uint8_t Reserved[221]; /* Reserved for description
- strings and future */
- /* expansion */
+ /** Supplemental VBE Signature */
+ uint8_t SupVbeSignature[7];
+ /** Supplemental VBE Version */
+ uint16_t SupVbeVersion;
+ /** Bitfield of supported subfunctions */
+ uint8_t SupVbeSubFunc[8];
+ /** OEM Software revision */
+ uint16_t OemSoftwareRev;
+ /** VBE_far_pointer to Vendor Name String */
+ uint8_t *OemVendorNamePtr;
+ /** VBE_far_pointer to Product Name String */
+ uint8_t *OemProductNamePtr;
+ /** VBE_far_pointer to Product Revision String */
+ uint8_t *OemProductRevPtr;
+ /** VBE_far_pointer to OEM String */
+ uint8_t *OemStringPtr;
+ /** Reserved for description strings and future expansion */
+ uint8_t Reserved[221];
} RTEMS_COMPILER_PACKED_ATTRIBUTE VBE_supplemental_vbe_info_block;
-/* VbeInfoBlock Capabilities */
-/* D0 = 0 DAC is fixed width, with 6 bits per primary color */
-/* = 1 DAC width is switchable to 8 bits per primary color */
+/* VBE_vbe_info_block Capabilities */
+/** VBE Info Block - Capabilities\n
+ D0 = 0 DAC is fixed width, with 6 bits per primary color \n
+ D0 = 1 DAC width is switchable to 8 bits per primary color */
#define VBE_DACswitchableMask 0x0001
-/* D1 = 0 Controller is VGA compatible */
-/* = 1 Controller is not VGA compatible */
+/** VBE Info Block - Capabilities\n
+ D1 = 0 Controller is VGA compatible \n
+ D1 = 1 Controller is not VGA compatible */
#define VBE_notVGAcompatibleMask 0x0002
-/* D2 = 0 Normal RAMDAC operation */
-/* = 1 When programming large blocks of information to the RAMDAC,
+/** VBE Info Block - Capabilities\n
+ D2 = 0 Normal RAMDAC operation \n
+ D2 = 1 When programming large blocks of information to the RAMDAC,
use the blank bit in Function 09h. */
#define VBE_specialRAMDACopMask 0x0004
-/* D3 = 0 No hardware stereoscopic signaling support */
-/* = 1 Hardware stereoscopic signaling supported by controller */
+/** VBE Info Block - Capabilities\n
+ D3 = 0 No hardware stereoscopic signaling support \n
+ D3 = 1 Hardware stereoscopic signaling supported by controller */
#define VBE_hwStereoscopicMask 0x0008
-/* D4 = 0 Stereo signaling supported via external VESA stereo connector */
-/* = 1 Stereo signaling supported via VESA EVC connector */
+/** VBE Info Block - Capabilities\n
+ D4 = 0 Stereo signaling supported via external VESA stereo connector \n
+ D4 = 1 Stereo signaling supported via VESA EVC connector */
#define VBE_supportEVCconnMask 0x0010
/* D5-31 = Reserved */
-/* ModeInfoBlock ModeAttributes */
-/* D0 = Mode supported by hardware configuration */
-/* 0 = Mode not supported in hardware */
-/* 1 = Mode supported in hardware */
+/* VBE_mode_info_block ModeAttributes */
+/** Mode Info Block - Mode Attributes\n
+ D0 = Mode supported by hardware configuration.
+ 0 = Mode not supported in hardware\n
+ 1 = Mode supported in hardware */
#define VBE_modSupInHWMask 0x0001
/* D1 = 1 (Reserved) */
-/* D2 = TTY Output functions supported by BIOS */
-/* 0 = TTY Output functions not supported by BIOS */
-/* 1 = TTY Output functions supported by BIOS */
+/** Mode Info Block - Mode Attributes\n
+ D2 = TTY Output functions supported by BIOS.
+ 0 = TTY Output functions not supported by BIOS\n
+ 1 = TTY Output functions supported by BIOS */
#define VBE_TTYOutSupByBIOSMask 0x0004
-/* D3 = Monochrome/color mode (see note below) */
-/* 0 = Monochrome mode */
-/* 1 = Color mode */
+/** Mode Info Block - Mode Attributes\n
+ D3 = Monochrome/color mode (see note below).
+ 0 = Monochrome mode\n
+ 1 = Color mode */
#define VBE_ColorModeMask 0x0008
-/* D4 = Mode type */
-/* 0 = Text mode */
-/* 1 = Graphics mode */
+/** Mode Info Block - Mode Attributes\n
+ D4 = Mode type.
+ 0 = Text mode\n
+ 1 = Graphics mode */
#define VBE_GraphicsModeMask 0x0010
-/* D5 = VGA compatible mode */
-/* 0 = Yes */
-/* 1 = No */
+/** Mode Info Block - Mode Attributes\n
+ D5 = VGA compatible mode.
+ 0 = Yes\n
+ 1 = No */
#define VBE_VGACompModeMask 0x0020
-/* D6 = VGA compatible windowed memory mode is available */
-/* 0 = Yes */
-/* 1 = No */
+/** Mode Info Block - Mode Attributes\n
+ D6 = VGA compatible windowed memory mode is available.
+ 0 = Yes\n
+ 1 = No */
#define VBE_VGACompWinMemModeMask 0x0040
-/* D7 = Linear frame buffer mode is available */
-/* 0 = No */
-/* 1 = Yes */
+/** Mode Info Block - Mode Attributes\n
+ D7 = Linear frame buffer mode is available.
+ 0 = No\n
+ 1 = Yes */
#define VBE_LinFraBufModeAvaiMask 0x0080
-/* D8 = Double scan mode is available */
-/* 0 = No */
-/* 1 = Yes */
+/** Mode Info Block - Mode Attributes\n
+ D8 = Double scan mode is available.
+ 0 = No\n
+ 1 = Yes */
#define VBE_DblScnModeAvaiMask 0x0100
-/* D9 = Interlaced mode is available */
-/* 0 = No */
-/* 1 = Yes */
+/** Mode Info Block - Mode Attributes\n
+ D9 = Interlaced mode is available.
+ 0 = No\n
+ 1 = Yes */
#define VBE_InterlModeAvaiMask 0x0200
-/* D10 = Hardware triple buffering support */
-/* 0 = No */
-/* 1 = Yes */
+/** Mode Info Block - Mode Attributes\n
+ D10 = Hardware triple buffering support.
+ 0 = No\n
+ 1 = Yes */
#define VBE_HWTripBufSupMask 0x0400
-/* D11 = Hardware stereoscopic display support */
-/* 0 = No */
-/* 1 = Yes */
+/** Mode Info Block - Mode Attributes\n
+ D11 = Hardware stereoscopic display support.
+ 0 = No\n
+ 1 = Yes */
#define VBE_HWSterDispSupMask 0x0800
-/* D12 = Dual display start address support */
-/* 0 = No */
-/* 1 = Yes */
+/** Mode Info Block - Mode Attributes\n
+ D12 = Dual display start address support.
+ 0 = No\n
+ 1 = Yes */
#define VBE_DualDispStAdrSupMask 0x1000
/* D13-D15 = Reserved */
-/* ModeInfoBlock WinXAttributes */
-/* D0 = Relocatable window(s) supported */
-/* 0 = Single non-relocatable window only */
-/* 1 = Relocatable window(s) are supported */
+/* VBE_mode_info_block WinXAttributes */
+/** D0 = Relocatable window(s) supported.
+ 0 = Single non-relocatable window only\n
+ 1 = Relocatable window(s) are supported */
#define VBE_RelocWinSupMask 0x01
-/* D1 = Window readable */
-/* 0 = Window is not readable */
-/* 1 = Window is readable */
+/** D1 = Window readable.
+ 0 = Window is not readable\n
+ 1 = Window is readable */
#define VBE_WinReadableMask 0x02
-/* D2 = Window writeable */
-/* 0 = Window is not writeable */
-/* 1 = Window is writeable */
+/** D2 = Window writeable.
+ 0 = Window is not writeable\n
+ 1 = Window is writeable */
#define VBE_WinWritableMask 0x04
/* D3-D7 = Reserved */
-/* ModeInfoBlock MemoryModel */
+/* VBE_mode_info_block MemoryModel */
#define VBE_TextMode 0x00
#define VBE_CGAGraphics 0x01
#define VBE_HerculesGraphics 0x02
@@ -385,32 +526,36 @@ typedef struct {
/* 0x08-0x0F Reserved, to be defined by VESA */
/* 0x10-0xFF To be defined by OEM */
-/* ModeInfoBlock DirectColorModeInfo */
-/* D0 = Color ramp is fixed/programmable */
-/* 0 = Color ramp is fixed */
-/* 1 = Color ramp is programmable */
+/* VBE_mode_info_block DirectColorModeInfo */
+/** D0 = Color ramp is fixed/programmable.
+ 0 = Color ramp is fixed\n
+ 1 = Color ramp is programmable */
#define VBE_ColRampProgMask 0x01
-/* D1 = Bits in Rsvd field are usable/reserved */
-/* 0 = Bits in Rsvd field are reserved */
-/* 1 = Bits in Rsvd field are usable by the application */
+/** D1 = Bits in Rsvd field are usable/reserved.
+ 0 = Bits in Rsvd field are reserved\n
+ 1 = Bits in Rsvd field are usable by the application */
#define VBE_RsvdBitsUsableMask 0x02
-/* CRTCInfoBlock Flags */
-/* D0 = Double Scan Mode Enable */
-/* 0 = Graphics mode is not double scanned */
-/* 1 = Graphics mode is double scanned */
+/* VBE_CRTC_info_block Flags */
+/** CRTC Info Block - Flags\n
+ D0 = Double Scan Mode Enable.
+ 0 = Graphics mode is not double scanned\n
+ 1 = Graphics mode is double scanned */
#define VBE_GrModeDblScanMask 0x01
-/* D1 = Interlaced Mode Enable */
-/* 0 = Graphics mode is non-interlaced */
-/* 1 = Graphics mode is interlaced */
+/** CRTC Info Block - Flags\n
+ D1 = Interlaced Mode Enable.
+ 0 = Graphics mode is non-interlaced\n
+ 1 = Graphics mode is interlaced */
#define VBE_GrModeInterlMask 0x02
-/* D2 = Horizontal sync polarity */
-/* 0 = Horizontal sync polarity is positive (+) */
-/* 1 = Horizontal sync polarity is negative (-) */
+/** CRTC Info Block - Flags\n
+ D2 = Horizontal sync polarity.
+ 0 = Horizontal sync polarity is positive (+)\n
+ 1 = Horizontal sync polarity is negative (-) */
#define VBE_HorSncPolNegMask 0x04
-/* D3 = Vertical sync polarity */
-/* 0 = Vertical sync polarity is positive (+) */
-/* 1 = Vertical sync polarity is negative (-) */
+/** CRTC Info Block - Flags\n
+ D3 = Vertical sync polarity.
+ 0 = Vertical sync polarity is positive (+)\n
+ 1 = Vertical sync polarity is negative (-) */
#define VBE_VerSncPolNegMask 0x08
@@ -418,17 +563,19 @@ typedef struct {
Version: 1.1 November 18, 1999 */
/* VBE/DDC subfunction numbers - passed in BL register */
-#define VBEDDC_Capabilities 0x0 /* Report VBE/DDC Capabilities */
-#define VBEDDC_ReadEDID 0x1 /* Read EDID */
+/** VBE/DDC subfunction - Report VBE/DDC Capabilities */
+#define VBEDDC_Capabilities 0x0
+/** VBE/DDC subfunction - Read EDID */
+#define VBEDDC_ReadEDID 0x1
/* DDC Capabilities */
/* DDC level supported - returned in BL register */
-/* 0 - DDC1 not supported; 1 - DDC1 supported */
+/** 0 - DDC1 not supported; 1 - DDC1 supported */
#define VBEDDC_1SupportedMask 0x1
-/* 0 - DDC2 not supported; 1 - DDC2 supported */
+/** 0 - DDC2 not supported; 1 - DDC2 supported */
#define VBEDDC_2SupportedMask 0x2
-/* 0 - Screen not blanked during data transfer;
- 1 - Screen blanked during data transfer */
+/** 0 - Screen not blanked during data transfer\n
+ 1 - Screen blanked during data transfer */
#define VBEDDC_scrBlnkDatTrMs 0x4
@@ -436,20 +583,31 @@ typedef struct {
Version: 1.0 Revision: 2 Date: July 2, 1997 */
/* VBE/SCI subfunction numbers - passed in BL register */
-#define VBESCI_ReportCapabil 0x10 /* Report VBE/SCI Capabilities */
-#define VBESCI_BegSCLSDACtrl 0x11 /* Begin SCL/SDA control */
-#define VBESCI_EndSCLSDACtrl 0x12 /* End SCL/SDA control */
-#define VBESCI_WrtSCLClkLine 0x13 /* Write SCL clock line */
-#define VBESCI_WrtSDADatLine 0x14 /* Write SDA data line */
-#define VBESCI_RdySCLClkLine 0x15 /* Read SCL clock line */
-#define VBESCI_RdySDADatLine 0x16 /* Read SDA data line */
+/** VBE/SCI subfunction - Report VBE/SCI Capabilities */
+#define VBESCI_ReportCapabil 0x10
+/** VBE/SCI subfunction - Begin SCL/SDA control */
+#define VBESCI_BegSCLSDACtrl 0x11
+/** VBE/SCI subfunction - End SCL/SDA control */
+#define VBESCI_EndSCLSDACtrl 0x12
+/** VBE/SCI subfunction - Write SCL clock line */
+#define VBESCI_WrtSCLClkLine 0x13
+/** VBE/SCI subfunction - Write SDA data line */
+#define VBESCI_WrtSDADatLine 0x14
+/** VBE/SCI subfunction - Read SCL clock line */
+#define VBESCI_RdySCLClkLine 0x15
+/** VBE/SCI subfunction - Read SDA data line */
+#define VBESCI_RdySDADatLine 0x16
/* SCI Capabilities */
/* I2C level supported - returned in BL register */
-#define VBESCI_capSCLwrtMask 0x1 /* Can write to SCL clock line */
-#define VBESCI_capSDAwrtMask 0x2 /* Can write to SDA data line */
-#define VBESCI_capSCLrdyMask 0x4 /* Can read from SCL clock line */
-#define VBESCI_capSDArdyMask 0x8 /* Can read from SDA data line */
+/** Can write to SCL clock line */
+#define VBESCI_capSCLwrtMask 0x1
+/** Can write to SDA data line */
+#define VBESCI_capSDAwrtMask 0x2
+/** Can read from SCL clock line */
+#define VBESCI_capSCLrdyMask 0x4
+/** Can read from SDA data line */
+#define VBESCI_capSDArdyMask 0x8
#ifdef __cplusplus
diff --git a/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.c b/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.c
index af5cf1e..6836af3 100644
--- a/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.c
+++ b/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.c
@@ -1,20 +1,28 @@
-/*
- * Realmode interrupt call implementation.
+/**
+ * @file realmode_int.c
*
+ * @ingroup i386_shared
*
- * Copyright (c) 2014 - CTU in Prague
- * Jan Doležal ( dolezj21 at fel.cvut.cz )
+ * @brief Real mode interrupt call implementation
+ */
+
+/*
+ * Copyright (c) 2014 - CTU in Prague
+ * Jan Doležal ( dolezj21 at fel.cvut.cz )
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
- *
*/
#include <bsp/realmode_int.h>
#include <string.h>
#include <rtems/score/cpu.h>
+/*
+ * offsets to \a i386_realmode_interrupt_registers declared in realmode_int.h
+ * used in inline assmbler for better readability
+ */
#define IR_EAX_OFF "0x00"
#define IR_EBX_OFF "0x04"
#define IR_ECX_OFF "0x08"
@@ -26,25 +34,45 @@
#define IR_FS_OFF "0x1C"
#define IR_GS_OFF "0x1E"
+/*
+ * offsets to \a rm_int_regs_bkp_param
+ */
#define BKP_ESP_OFF "0x20"
#define BKP_SS_OFF "0x24"
#define BKP_DS_OFF "0x26"
#define RM_ENTRY "0x28"
#define PM_ENTRY "0x2C"
-/* parameters, results, backup values accessible in real mode */
+/**
+ * @brief parameters, results, backup values accessible in real mode
+ *
+ * @note Struct members not necessarily used in C. This serves also as
+ * layout of memory and it is used within inline assembler.
+ */
typedef struct {
i386_realmode_interrupt_registers inoutregs;
+ /** spot for back up of protected mode stack pointer */
uint32_t pm_esp_bkp;
+ /** spot for back up of protected mode stack selector */
uint16_t pm_ss_bkp;
+ /** spot for back up of protected mode data selector */
uint16_t ds_bkp;
+ /** spot for setting up long indirect jump offset
+ to real mode from 16bit protected mode */
uint16_t rm_entry;
+ /** spot for setting up long indirect jump segment
+ to real mode from 16bit protected mode */
uint16_t rm_code_segment;
+ /** returning offset for long indirect jump back
+ to 32bit protected mode */
uint32_t pm_entry;
+ /** returning selector for long indirect jump back
+ to 32bit protected mode */
uint16_t pm_code_selector;
- /* if modifying update offset definitions as well */
+ /* if this struct is to be modified update offset definitions as well */
} RTEMS_COMPILER_PACKED_ATTRIBUTE rm_int_regs_bkp_param;
+/* offsets to \a pm_bkp_and_param */
#define BKP_IDTR_LIM "0x00"
#define BKP_IDTR_BASE "0x02"
#define BKP_ES_OFF "0x06"
@@ -55,18 +83,35 @@ typedef struct {
#define RM_SS "0x14"
#define RM_SP "0x16"
#define RM_DS "0x18"
-/* backup values, pointers/parameters accessible in protected mode */
+
+/**
+ * @brief backup values, pointers/parameters accessible in protected mode
+ *
+ * @note Struct members not necessarily used in C. This serves also as
+ * layout of memory and it is used within inline assembler.
+ */
typedef struct {
+ /** spot for backup protected mode interrupt descriptor table register */
uint16_t idtr_lim_bkp;
+ /** @see idtr_lim_bkp */
uint32_t idtr_base_bkp;
+ /** spot to backup of ES register value in 32bit protected mode */
uint16_t es_bkp;
+ /** spot to backup of FS register value in 32bit protected mode */
uint16_t fs_bkp;
+ /** spot to backup of GS register value in 32bit protected mode */
uint16_t gs_bkp;
+ /** values for indirect jump to 16bit protected mode */
uint32_t rml_entry;
+ /** @see rml_entry */
uint16_t rml_code_selector;
+ /** data selector for 16bit protected mode */
uint16_t rml_data_selector;
+ /** values determinig location of real mode stack */
uint16_t rm_stack_segment;
+ /** @see rm_stack_segment */
uint16_t rm_stack_pointer;
+ /** data segment for real mode */
uint16_t rm_data_segment;
} RTEMS_COMPILER_PACKED_ATTRIBUTE pm_bkp_and_param;
@@ -112,10 +157,14 @@ static __DP_TYPE descsPrepared = __DP_NO;
static uint16_t rml_code_dsc_index = 0;
static uint16_t rml_data_dsc_index = 0;
-/*
- * Prepares real-mode like descriptors to be used for switching
+/**
+ * @brief Prepares real-mode like descriptors to be used for switching
* to real mode.
*
+ * Descriptors will be placed to the GDT.
+ *
+ * @param[in] base32 32-bit physical address to be used as base for 16-bit
+ * protected mode descriptors
* @retval __DP_YES descriptors are prepared
* @retval __DP_FAIL descriptors allocation failed (GDT too small)
*/
diff --git a/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.h b/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.h
index a0216ea..6f77ec9 100644
--- a/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.h
+++ b/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.h
@@ -4,14 +4,14 @@
* @ingroup i386_shared
*
* @brief Definitioins supporting real mode interrupt calls.
+ *
+ * Interface allows calling given interrupt number with content of the
+ * registers defined. For passing or receiving higher amounts of the data
+ * there is a buffer accessible from real mode available. Real mode pointer
+ * to this buffer is passed to the interrupt in the registers.
*/
/*
- * Interface allows calling given interrupt number with content of the
- * registers defined. For passing or receiving higher amounts of the data
- * there is a buffer accessible from real mode available. Real mode pointer
- * to this buffer is passed to the interrupt in the registers.
- *
* Copyright (C) 2014 Jan Doležal (dolezj21 at fel.cvut.cz)
* CTU in Prague.
*
@@ -36,7 +36,11 @@ extern "C" {
/* number of interrupt servicing video functions */
#define INTERRUPT_NO_VIDEO_SERVICES 0x10
-typedef struct { /* used for passing parameters, fetching results and preserving values */
+/**
+ * @brief Used for passing and retrieving registers content to/from real mode
+ * interrupt call.
+ */
+typedef struct {
uint32_t reg_eax;
uint32_t reg_ebx;
uint32_t reg_ecx;
@@ -50,6 +54,8 @@ typedef struct { /* used for passing parameters, fetching results and preserving
} RTEMS_COMPILER_PACKED_ATTRIBUTE i386_realmode_interrupt_registers;
/**
+ * @brief Returns buffer and its size usable with real mode interrupt call.
+ *
* Provides position to real mode buffer. It is buffer
* accessible from real mode context - it is located below
* address ~0x100000 in order for it to be accessible
@@ -57,22 +63,25 @@ typedef struct { /* used for passing parameters, fetching results and preserving
* and through this get bigger portion of an information to/from
* interrupt service routine than just by using register.
*
- * @param size pointer to variable, where the size of buffer
- * will be filled
+ * @param[out] size pointer to variable, where the size of buffer
+ * will be filled
* @retval pointer to buffer
*/
extern void *i386_get_default_rm_buffer(uint16_t *size);
/**
+ * @brief Call to real mode interrupt with specified int NO and processor
+ * registers.
+ *
* This function allows calling interrupts in real mode and to set processor
* registers as desired before interrupt call is made and to retrieve the
* registers content after call was made.
*
- * @param interruptNumber interrupt number to be called
- * @param ir pointer to structure containing registers to be passed to interrupt
- * and to retrieve register content after call was made.
+ * @param[in] interrupt_number interrupt number to be called
+ * @param[in] ir pointer to structure containing registers to be passed to
+ * interrupt and to retrieve register content after call was made.
* @retval 0 call failed (GDT too small or pagin is on)
- * 1 call successful
+ * @retval 1 call successful
*/
extern int i386_real_interrupt_call(
uint8_t interrupt_number,
diff --git a/c/src/lib/libcpu/i386/cpu.h b/c/src/lib/libcpu/i386/cpu.h
index 23a82de..0242e27 100644
--- a/c/src/lib/libcpu/i386/cpu.h
+++ b/c/src/lib/libcpu/i386/cpu.h
@@ -1,5 +1,7 @@
/*
- * cpu.h - This file contains definitions for data structure related
+ * @file cpu.h
+ *
+ * This file contains definitions for data structure related
* to Intel system programming. More information can be found
* on Intel site and more precisely in the following book :
*
@@ -241,7 +243,9 @@ extern int i386_get_idt_config (rtems_raw_irq_global_settings** config);
* See page 11.12 Figure 11-8.
*
*/
-
+/**
+ * @brief describes one entry of Global/Local Descriptor Table
+ */
typedef struct {
unsigned int limit_15_0 : 16;
unsigned int base_address_15_0 : 16;
@@ -272,34 +276,36 @@ extern void i386_set_GDTR (segment_descriptors*,
uint16_t limit);
/**
- * C callable function:
- * Puts global descriptor @sd to the global descriptor table on index
- * @segment_selector_index
+ * @brief Allows to set a GDT entry.
*
+ * Puts global descriptor \p sd to the global descriptor table on index
+ * \p segment_selector_index
+ *
+ * @param[in] segment_selector_index index to GDT entry
+ * @param[in] sd structure to be coppied to given \p segment_selector in GDT
* @retval 0 FAILED out of GDT range or index is 0, which is not valid
* index in GDT
- * 1 SUCCESS
+ * @retval 1 SUCCESS
*/
extern uint32_t i386_raw_gdt_entry (uint16_t segment_selector_index,
segment_descriptors* sd);
/**
- * C callable function
- * fills @sd with provided @base in appropriate fields of @sd
+ * @brief fills \p sd with provided \p base in appropriate fields of \p sd
*
- * @param base 32-bit address to be set as descriptor's base
- * @param sd descriptor being filled with @base
+ * @param[in] base 32-bit address to be set as descriptor's base
+ * @param[out] sd descriptor being filled with \p base
*/
extern void i386_fill_segment_desc_base (uint32_t base,
segment_descriptors* sd);
/**
- * C callable function
- * fills @sd with provided @limit in appropriate fields of @sd
- * also influences granularity bit
+ * @brief fills \p sd with provided \p limit in appropriate fields of \p sd
+ *
+ * sets granularity bit if necessary
*
- * @param limit 32-bit value representing number of limit bytes
- * @param sd descriptor being filled with @limit
+ * @param[in] limit 32-bit value representing number of limit bytes
+ * @param[out] sd descriptor being filled with \p limit
*/
extern void i386_fill_segment_desc_limit (uint32_t limit,
segment_descriptors* sd);
@@ -312,37 +318,40 @@ extern uint32_t i386_set_gdt_entry (uint16_t segment_selector,
uint32_t limit);
/**
- * C callable function returns next empty descriptor in GDT.
+ * @brief Returns next empty descriptor in GDT.
+ *
+ * Number of descriptors that can be returned depends on \a GDT_SIZE
*
* @retval 0 FAILED GDT is full
- * <1;65535> segment_selector number as index to GDT
+ * @retval <1;65535> segment_selector number as index to GDT
*/
extern uint16_t i386_next_empty_gdt_entry (void);
/**
- * Copies GDT entry at index @segment_selector to structure
- * pointed to by @struct_to_fill
+ * @brief Copies GDT entry at index \p segment_selector to structure
+ * pointed to by \p struct_to_fill
*
- * @param segment_selector index to GDT table for specifying descriptor to copy
+ * @param[in] segment_selector index to GDT table specifying descriptor to copy
+ * @param[out] struct_to_fill pointer to memory where will be descriptor coppied
* @retval 0 FAILED segment_selector out of GDT range
- * <1;65535> retrieved segment_selector
+ * @retval <1;65535> retrieved segment_selector
*/
extern uint16_t i386_cpy_gdt_entry (uint16_t segment_selector,
segment_descriptors* struct_to_fill);
/**
- * Returns pointer to GDT table at index given by @segment_selector
+ * @brief Returns pointer to GDT table at index given by \p segment_selector
*
- * @param segment_selector index to GDT table for specifying descriptor to get
+ * @param[in] sgmnt_selector index to GDT table for specifying descriptor to get
* @retval NULL FAILED segment_selector out of GDT range
- * pointer to GDT table at @segment_selector
+ * @retval pointer to GDT table at \p segment_selector
*/
extern segment_descriptors* i386_get_gdt_entry (uint16_t sgmnt_selector);
/**
- * Extracts base address from GDT entry pointed to by @gdt_entry
+ * @brief Extracts base address from GDT entry pointed to by \p gdt_entry
*
- * @param gdt_entry pointer to entry from which base should be retrieved
+ * @param[in] gdt_entry pointer to entry from which base should be retrieved
* @retval base address from GDT entry
*/
RTEMS_INLINE_ROUTINE void* i386_base_gdt_entry (segment_descriptors* gdt_entry)
@@ -353,9 +362,9 @@ RTEMS_INLINE_ROUTINE void* i386_base_gdt_entry (segment_descriptors* gdt_entry)
}
/**
- * Extracts limit in bytes from GDT entry pointed to by @gdt_entry
+ * @brief Extracts limit in bytes from GDT entry pointed to by \p gdt_entry
*
- * @param gdt_entry pointer to entry from which limit should be retrieved
+ * @param[in] gdt_entry pointer to entry from which limit should be retrieved
* @retval limit value in bytes from GDT entry
*/
extern uint32_t i386_limit_gdt_entry (segment_descriptors* gdt_entry);
diff --git a/cpukit/score/cpu/i386/cpu_asm.S b/cpukit/score/cpu/i386/cpu_asm.S
index f3ef4e2..45079a6 100644
--- a/cpukit/score/cpu/i386/cpu_asm.S
+++ b/cpukit/score/cpu/i386/cpu_asm.S
@@ -334,9 +334,9 @@ SYM (i386_Physical_to_logical):
* uint16_t *offset
* );
*
- * Fills segment:offest realmode pointer counted from thirty-two bit physical
+ * Fills segment:offest real mode pointer counted from thirty-two bit physical
* address.
- * Returns 0 if unconvertible, 1 if successfuly converted.
+ * Returns 0 if inconvertible, 1 if successfuly converted.
*/
.set PHYS_PTR_ARG, 4
diff --git a/cpukit/score/cpu/i386/rtems/score/i386.h b/cpukit/score/cpu/i386/rtems/score/i386.h
index 926627d..875526a 100644
--- a/cpukit/score/cpu/i386/rtems/score/i386.h
+++ b/cpukit/score/cpu/i386/rtems/score/i386.h
@@ -185,10 +185,14 @@ void *i386_Physical_to_logical(
void *address
);
-/*
- * i386_Real_to_physical
+/**
+ * @brief Converts real mode pointer {segment, offset} to physical address.
+ *
+ * i386_Real_to_physical
*
- * Converts real mode pointer {segment, offset} to physical address.
+ * @param[in] segment used with \p offset to compute physical address
+ * @param[in] offset used with \p segment to compute physical address
+ * @retval physical address
*/
RTEMS_INLINE_ROUTINE void *i386_Real_to_physical(
uint16_t segment,
@@ -197,19 +201,24 @@ RTEMS_INLINE_ROUTINE void *i386_Real_to_physical(
return (void *)(((uint32_t)segment<<4)+offset);
}
-/*
- * i386_Physical_to_real
- * Retreives real mode pointer elements {segmnet, offset} from physical address
- * Function returns the highest segment (base) address possible.
- * Example: input address - 0x4B3A2
- * output segment - 0x4B3A
- * offset - 0x2
- * input address - 0x10F12E
- * output segment - 0xFFFF
- * offset - 0xF13E
+/**
+ * @brief Retreives real mode pointer elements {segmnet, offset} from
+ * physical address.
+ *
+ * i386_Physical_to_real
+ * Function returns the highest segment (base) address possible.
+ * Example: input address - 0x4B3A2
+ * output segment - 0x4B3A
+ * offset - 0x2
+ * input address - 0x10F12E
+ * output segment - 0xFFFF
+ * offset - 0xF13E
*
- * return 0 address not convertible, must be less than 0x10FFEF
- * 1 segment and offset extracted
+ * @param[in] address address to be converted, must be less than 0x10FFEF
+ * @param[out] segment segment computed from \p address
+ * @param[out] offset offset computed from \p address
+ * @retval 0 address not convertible
+ * @retval 1 segment and offset extracted
*/
int i386_Physical_to_real(
void *address,
--
1.9.1
More information about the devel
mailing list