[PATCH 17/17] bsp/altera-cyclone-v: Implement BSP

Gedare Bloom gedare at rtems.org
Wed Feb 26 19:19:30 UTC 2014


Please choose and stick with one mnemonic for the new BSP. You have
used altera-cyclone-v as the BSP group name, but used cylone_v_ and
altcycv_ for the bsp namespace functions, and CYCLONE_V and ALTCYCV
for the prefix of cpp defines. the bsp namespace should be
altera_cyclone_v and cpp should be ALTERA_CYCLONE_V if the bsp is
named altera-cyclone-v.
-Gedare

On Wed, Feb 26, 2014 at 5:52 AM, Ralf Kirchner
<ralf.kirchner at embedded-brains.de> wrote:
> Implemented so far:
> - nocache heap for uncached RAM
> - basic timer
> - level 1 cache handling for arm cache controller
>   in arm-cache-l1.h
> - level 2 L2C-310 cache controller
> - MMU
> - DWMAC 1000 ethernet controller
> - counts for BSP objects
> - basic errata handling
> - smp startup for second core
> ---
>  c/src/lib/libbsp/arm/altera-cyclone-v/Makefile.am  |   16 +-
>  c/src/lib/libbsp/arm/altera-cyclone-v/README       |    3 +
>  c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac |   11 +-
>  .../arm/altera-cyclone-v/console/console-config.c  |  167 ++-
>  .../lib/libbsp/arm/altera-cyclone-v/include/bsp.h  |   46 +-
>  .../lib/libbsp/arm/altera-cyclone-v/include/irq.h  |   69 +-
>  .../libbsp/arm/altera-cyclone-v/include/network.h  |   59 +
>  .../arm/altera-cyclone-v/include/nocache-heap.h    |   49 +
>  .../libbsp/arm/altera-cyclone-v/network/network.c  | 1241 ++++++++++++++++++++
>  .../lib/libbsp/arm/altera-cyclone-v/preinstall.am  |   20 +
>  .../libbsp/arm/altera-cyclone-v/startup/bspreset.c |   10 +-
>  .../libbsp/arm/altera-cyclone-v/startup/bspstart.c |  112 +-
>  .../arm/altera-cyclone-v/startup/bspstarthooks.c   |  231 +++-
>  .../startup/linkcmds.altcycv_devkit                |   16 +-
>  .../arm/altera-cyclone-v/startup/nocache-heap.c    |   87 ++
>  15 Dateien geändert, 1944 Zeilen hinzugefügt(+), 193 Zeilen entfernt(-)
>  create mode 100644 c/src/lib/libbsp/arm/altera-cyclone-v/include/network.h
>  create mode 100644 c/src/lib/libbsp/arm/altera-cyclone-v/include/nocache-heap.h
>  create mode 100644 c/src/lib/libbsp/arm/altera-cyclone-v/network/network.c
>  create mode 100644 c/src/lib/libbsp/arm/altera-cyclone-v/startup/nocache-heap.c
>
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/Makefile.am b/c/src/lib/libbsp/arm/altera-cyclone-v/Makefile.am
> index 6b1749b..1cd92af 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/Makefile.am
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/Makefile.am
> @@ -33,15 +33,20 @@ include_bsp_HEADERS += ../../shared/include/irq-info.h
>  include_bsp_HEADERS += ../../shared/include/stackalloc.h
>  include_bsp_HEADERS += ../../shared/tod.h
>  include_bsp_HEADERS += ../shared/include/start.h
> +include_bsp_HEADERS += ../shared/include/arm-a9mpcore-clock.h
>  include_bsp_HEADERS += ../shared/include/arm-a9mpcore-irq.h
>  include_bsp_HEADERS += ../shared/include/arm-a9mpcore-regs.h
>  include_bsp_HEADERS += ../shared/include/arm-a9mpcore-start.h
>  include_bsp_HEADERS += ../shared/include/arm-cp15-start.h
> +include_bsp_HEADERS += ../shared/include/arm-errata.h
>  include_bsp_HEADERS += ../shared/include/arm-gic.h
>  include_bsp_HEADERS += ../shared/include/arm-gic-irq.h
>  include_bsp_HEADERS += ../shared/include/arm-gic-regs.h
>  include_bsp_HEADERS += ../shared/include/arm-gic-tm27.h
> +include_bsp_HEADERS += ../shared/include/arm-release-id.h
>  include_bsp_HEADERS += include/irq.h
> +include_bsp_HEADERS += include/network.h
> +include_bsp_HEADERS += include/nocache-heap.h
>
>  # Altera hwlib
>  include_bsp_HEADERS += hwlib/include/alt_16550_uart.h
> @@ -139,6 +144,7 @@ libbsp_a_SOURCES += ../shared/arm-cp15-set-ttb-entries.c
>  # Startup
>  libbsp_a_SOURCES += startup/bspreset.c
>  libbsp_a_SOURCES += startup/bspstart.c
> +libbsp_a_SOURCES += startup/nocache-heap.c
>
>  # IRQ
>  libbsp_a_SOURCES += ../../shared/src/irq-default-handler.c
> @@ -149,6 +155,9 @@ libbsp_a_SOURCES += ../../shared/src/irq-server.c
>  libbsp_a_SOURCES += ../../shared/src/irq-shell.c
>  libbsp_a_SOURCES += ../shared/arm-gic-irq.c
>
> +# Network
> +libbsp_a_SOURCES += network/network.c
> +
>  # Console
>  libbsp_a_SOURCES += ../../shared/console.c
>  libbsp_a_SOURCES += ../../shared/console_control.c
> @@ -163,10 +172,9 @@ libbsp_a_SOURCES += ../shared/arm-a9mpcore-clock-config.c
>
>  # Cache
>  libbsp_a_SOURCES += ../../../libcpu/shared/src/cache_manager.c
> -libbsp_a_SOURCES += ../../../libcpu/arm/shared/include/cache_.h
> -libbsp_a_CPPFLAGS += -I$(srcdir)/../../../libcpu/arm/shared/include
> -#libbsp_a_CPPFLAGS += -I$(srcdir)/startup/linux
> -#libbsp_a_SOURCES += startup/linux/cache-l2x0.c
> +libbsp_a_SOURCES += ../shared/include/arm-cache-l1.h
> +libbsp_a_SOURCES += ../shared/arm-l2c-310/cache_.h
> +libbsp_a_CPPFLAGS += -I$(srcdir)/../shared/arm-l2c-310
>
>  # Start hooks
>  libbsp_a_SOURCES += startup/bspstarthooks.c
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/README b/c/src/lib/libbsp/arm/altera-cyclone-v/README
> index e69de29..575b72e 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/README
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/README
> @@ -0,0 +1,3 @@
> +Evaluation board for this BSP:
> +- Cyclone V SoC FPGA Development Kit
> +- DK-DEV-5CSXC6N/ES-0L
> \ No newline at end of file
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac b/c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac
> index bcf5b10..561a192 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac
> @@ -24,7 +24,7 @@ AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
>  RTEMS_BSPOPTS_SET([BSP_START_RESET_VECTOR],[*],[])
>  RTEMS_BSPOPTS_HELP([BSP_START_RESET_VECTOR],[reset vector address for BSP start])
>
> -RTEMS_BSPOPTS_SET([BSP_ARM_A9MPCORE_PERIPHCLK],[altcycv_devkit*],[666666667U])
> +RTEMS_BSPOPTS_SET([BSP_ARM_A9MPCORE_PERIPHCLK],[altcycv_devkit*],[200000000U])
>  RTEMS_BSPOPTS_SET([BSP_ARM_A9MPCORE_PERIPHCLK],[*],[100000000U])
>  RTEMS_BSPOPTS_HELP([BSP_ARM_A9MPCORE_PERIPHCLK],[ARM Cortex-A9 MPCore PERIPHCLK clock frequency in Hz])
>
> @@ -37,6 +37,15 @@ simulation times.])
>  RTEMS_BSPOPTS_SET([BSP_CONSOLE_MINOR],[*],[0])
>  RTEMS_BSPOPTS_HELP([BSP_CONSOLE_MINOR],[minor number of console device])
>
> +RTEMS_BSPOPTS_SET([CYCLONE_V_CONFIG_CONSOLE],[*],[0])
> +RTEMS_BSPOPTS_HELP([CYCLONE_V_CONFIG_CONSOLE],[configuration for console (UART 0)])
> +
> +RTEMS_BSPOPTS_SET([CYCLONE_V_CONFIG_UART_1],[*],[0])
> +RTEMS_BSPOPTS_HELP([CYCLONE_V_CONFIG_UART_1],[configuration for UART 1])
> +
> +RTEMS_BSPOPTS_SET([CYCLONE_V_UART_BAUD],[*],[115200U])
> +RTEMS_BSPOPTS_HELP([CYCLONE_V_UART_BAUD],[baud for UARTs])
> +
>  RTEMS_CHECK_SMP
>  AM_CONDITIONAL(HAS_SMP,[test "$rtems_cv_HAS_SMP" = "yes"])
>
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/console/console-config.c b/c/src/lib/libbsp/arm/altera-cyclone-v/console/console-config.c
> index acad744..7e4dad9 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/console/console-config.c
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/console/console-config.c
> @@ -12,56 +12,151 @@
>   * http://www.rtems.com/license/LICENSE.
>   */
>
> +#include <assert.h>
> +#include <stdint.h>
> +#include <stdbool.h>
>  #include <libchip/serial.h>
> +#include <libchip/ns16550.h>
>
>  #include <bsp.h>
>  #include <bsp/irq.h>
> +#include <bsp/alt_16550_uart.h>
> +#include <socal/alt_rstmgr.h>
> +#include <socal/socal.h>
> +#include <socal/alt_uart.h>
> +#include <socal/hps.h>
> +
> +bool cyclone_v_uart_probe( int minor );
> +
> +static uint8_t cyclone_v_uart_get_register(uintptr_t addr, uint8_t i)
> +{
> +  volatile uint32_t *reg = (volatile uint32_t *) addr;
> +
> +  return (uint8_t) reg [i];
> +}
> +
> +static void cyclone_v_uart_set_register(uintptr_t addr, uint8_t i, uint8_t val)
> +{
> +  volatile uint32_t *reg = (volatile uint32_t *) addr;
> +
> +  reg [i] = val;
> +}
>
>  console_tbl Console_Configuration_Ports[] = {
> -#if 0
> +#ifdef CYCLONE_V_CONFIG_CONSOLE
> +  {
> +    .sDeviceName   = "/dev/ttyS0",
> +    .deviceType    = SERIAL_NS16550,
> +    .pDeviceFns    = &ns16550_fns,
> +    .deviceProbe   = cyclone_v_uart_probe,
> +    .pDeviceFlow   = NULL,
> +    .ulMargin      = 16,
> +    .ulHysteresis  = 8,
> +    .pDeviceParams = (void *)CYCLONE_V_UART_BAUD,
> +    .ulCtrlPort1   = (uint32_t)ALT_UART0_ADDR,
> +    .ulCtrlPort2   = 0,
> +    .ulDataPort    = (uint32_t)ALT_UART0_ADDR,
> +    .getRegister   = cyclone_v_uart_get_register,
> +    .setRegister   = cyclone_v_uart_set_register,
> +    .getData       = NULL,
> +    .setData       = NULL,
> +    .ulClock       = 0,
> +    .ulIntVector   = ALT_INT_INTERRUPT_UART0
> +  },
> +#endif
> +#ifdef CYCLONE_V_CONFIG_UART_1
>    {
> -    .sDeviceName = "/dev/ttyS0",
> -    .deviceType = SERIAL_CUSTOM,
> -    .pDeviceFns = &altcycv_uart_fns,
> -    .deviceProbe = NULL,
> -    .pDeviceFlow = NULL,
> -    .ulMargin = 0,
> -    .ulHysteresis = 0,
> -    .pDeviceParams = (void *) 115200,
> -    .ulCtrlPort1 = 0xe0000000,
> -    .ulCtrlPort2 = 0,
> -    .ulDataPort = 0,
> -    .getRegister = NULL,
> -    .setRegister = NULL,
> -    .getData = NULL,
> -    .setData = NULL,
> -    .ulClock = 0,
> -    .ulIntVector = ALTCYCV_IRQ_UART_0
> -  }, {
> -    .sDeviceName = "/dev/ttyS1",
> -    .deviceType = SERIAL_CUSTOM,
> -    .pDeviceFns = &altcycv_uart_fns,
> -    .deviceProbe = NULL,
> -    .pDeviceFlow = NULL,
> -    .ulMargin = 0,
> -    .ulHysteresis = 0,
> -    .pDeviceParams = (void *) 115200,
> -    .ulCtrlPort1 = 0xe0001000,
> -    .ulCtrlPort2 = 0,
> -    .ulDataPort = 0,
> -    .getRegister = NULL,
> -    .setRegister = NULL,
> -    .getData = NULL,
> -    .setData = NULL,
> -    .ulClock = 0,
> -    .ulIntVector = ALTCYCV_IRQ_UART_1
> +    .sDeviceName   = "/dev/ttyS1",
> +    .deviceType    = SERIAL_NS16550,
> +    .pDeviceFns    = &ns16550_fns,
> +    .deviceProbe   = cyclone_v_uart_probe,
> +    .pDeviceFlow   = NULL,
> +    .ulMargin      = 16,
> +    .ulHysteresis  = 8,
> +    .pDeviceParams = (void *)CYCLONE_V_UART_BAUD,
> +    .ulCtrlPort1   = (uint32_t)ALT_UART1_ADDR,
> +    .ulCtrlPort2   = 0,
> +    .ulDataPort    = (uint32_t)ALT_UART1_ADDR,
> +    .getRegister   = cyclone_v_uart_get_register,
> +    .setRegister   = cyclone_v_uart_set_register,
> +    .getData       = NULL,
> +    .setData       = NULL,
> +    .ulClock       = 0,
> +    .ulIntVector   = ALT_INT_INTERRUPT_UART1
>    }
>  #endif
>  };
>
> +
>  unsigned long Console_Configuration_Count =
>    RTEMS_ARRAY_SIZE(Console_Configuration_Ports);
>
> +bool cyclone_v_uart_probe(int minor)
> +{
> +  bool            ret           = true;
> +  uint32_t        uart_set_mask;
> +  uint32_t        ucr;
> +  ALT_STATUS_CODE sc;
> +  void*           location;
> +
> +  // The ALT_CLK_L4_SP is required for all SoCFPGA UARTs. Check that it's enabled.
> +  assert( alt_clk_is_enabled(ALT_CLK_L4_SP) == ALT_E_TRUE );
> +  if ( alt_clk_is_enabled(ALT_CLK_L4_SP) != ALT_E_TRUE ) {
> +    ret = false;
> +  }
> +
> +  if ( ret ) {
> +    switch(minor)
> +    {
> +      case(0):
> +        /* UART 0 */
> +        uart_set_mask = ALT_RSTMGR_PERMODRST_UART0_SET_MSK;
> +        location      = ALT_UART0_ADDR;
> +      break;
> +      case(1):
> +        /* UART 1 */
> +        uart_set_mask = ALT_RSTMGR_PERMODRST_UART1_SET_MSK;
> +        location      = ALT_UART1_ADDR;
> +      break;
> +      default:
> +        /* Unknown case */
> +        assert( minor == 0 || minor == 1 );
> +        ret = false;
> +      break;
> +    }
> +  }
> +  if ( ret ) {
> +    sc = alt_clk_freq_get(ALT_CLK_L4_SP, &Console_Configuration_Ports[minor].ulClock);
> +    assert( sc == ALT_E_SUCCESS );
> +    if ( sc != ALT_E_SUCCESS ) {
> +      ret = false;
> +    }
> +  }
> +
> +  if ( ret ) {
> +    // Bring UART out of reset.
> +    alt_clrbits_word(ALT_RSTMGR_PERMODRST_ADDR, uart_set_mask);
> +
> +    // Verify the UCR (UART Component Version)
> +    ucr = alt_read_word( ALT_UART_UCV_ADDR( location ) );
> +
> +    assert( ucr == ALT_UART_UCV_UART_COMPONENT_VER_RESET );
> +    if ( ucr != ALT_UART_UCV_UART_COMPONENT_VER_RESET ) {
> +      ret = false;
> +    }
> +  }
> +
> +  if ( ret ) {
> +    // Write SRR::UR (Shadow Reset Register :: UART Reset)
> +    alt_write_word( ALT_UART_SRR_ADDR( location ), ALT_UART_SRR_UR_SET_MSK );
> +
> +    // Read the MSR to work around case:119085.
> +    (void)alt_read_word( ALT_UART_MSR_ADDR( location ) );
> +  }
> +
> +  return ret;
> +}
> +
>  static void output_char(char c)
>  {
>    int minor = (int) Console_Port_Minor;
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/include/bsp.h b/c/src/lib/libbsp/arm/altera-cyclone-v/include/bsp.h
> index 8d872ee..6f08ed5 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/include/bsp.h
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/include/bsp.h
> @@ -26,25 +26,51 @@
>  #include <rtems/clockdrv.h>
>
>  #include <bsp/default-initial-extension.h>
> +#include <bsp/arm-release-id.h>
> +#if defined(RTEMS_NETWORKING)
> +  #include <bsp/network.h>
> +#endif /* defined(RTEMS_NETWORKING) */
>
>  #ifdef __cplusplus
>  extern "C" {
>  #endif /* __cplusplus */
>
> -#define BSP_ARM_A9MPCORE_SCU_BASE 0xf8f00000
> +#define BSP_ARM_A9MPCORE_SCU_BASE 0xFFFEC000
>
> -#define BSP_ARM_GIC_CPUIF_BASE 0xf8f00100
> +#define BSP_ARM_GIC_CPUIF_BASE ( BSP_ARM_A9MPCORE_SCU_BASE + 0x00000100 )
>
> -#define BSP_ARM_A9MPCORE_PT_BASE 0xf8f00600
> +#define BSP_ARM_A9MPCORE_GT_BASE ( BSP_ARM_A9MPCORE_SCU_BASE + 0x00000200 )
>
> -#define BSP_ARM_GIC_DIST_BASE 0xf8f01000
> +#define BSP_ARM_GIC_DIST_BASE ( BSP_ARM_A9MPCORE_SCU_BASE + 0x00001000 )
>
> -typedef enum {
> -  BSP_ARM_A9MPCORE_FATAL_CLOCK_IRQ_INSTALL,
> -  BSP_ARM_A9MPCORE_FATAL_CLOCK_IRQ_REMOVE
> -} altcycv_fatal_code;
> +#define BSP_ARM_L2CC_BASE 0xFFFEF000U
> +#define BSP_ARM_MAX_CORES_PER_CONTROLLER 2
>
> -void altcycv_fatal(altcycv_fatal_code code) RTEMS_COMPILER_NO_RETURN_ATTRIBUTE;
> +#ifndef RTEMS_NETWORKING
> +  /** @brief Number of semaphores created by the driver */
> +  #define BSP_NETWORK_SEMAPHORE_COUNT 0
> +
> +  /** @brief Number of tasks created by the driver */
> +  #define BSP_NETWORK_TASK_COUNT 0
> +
> +  /* Network #defines from bsp/network.h */
> +  #define RTEMS_BSP_NETWORK_DRIVER_ATTACH
> +  #define RTEMS_BSP_NETWORK_DRIVER_NAME
> +#else
> +  /* Network #defines from bsp/network.h */
> +  #define RTEMS_BSP_NETWORK_DRIVER_ATTACH NETWORK_IF_ATTACH_DETACH
> +  #define RTEMS_BSP_NETWORK_DRIVER_NAME NETWORK_IF_NAME
> +#endif /* RTEMS_NETWORKING */
> +
> +#define BSP_SEMAPHORE_COUNT \
> +  ( \
> +    BSP_NETWORK_SEMAPHORE_COUNT \
> +  )
> +
> +#define BSP_TASK_COUNT \
> +  ( \
> +    BSP_NETWORK_TASK_COUNT \
> +  )
>
>  #ifdef __cplusplus
>  }
> @@ -52,4 +78,4 @@ void altcycv_fatal(altcycv_fatal_code code) RTEMS_COMPILER_NO_RETURN_ATTRIBUTE;
>
>  #endif /* ASM */
>
> -#endif /* LIBBSP_ARM_ALTCYCV_BSP_H */
> +#endif /* LIBBSP_ARM_ALTCYCV_BSP_H */
> \ No newline at end of file
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/include/irq.h b/c/src/lib/libbsp/arm/altera-cyclone-v/include/irq.h
> index d548e5b..aeee41e 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/include/irq.h
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/include/irq.h
> @@ -22,74 +22,15 @@
>
>  #include <bsp/arm-a9mpcore-irq.h>
>  #include <bsp/arm-gic-irq.h>
> +#include <bsp/alt_interrupt_common.h>
>
>  #ifdef __cplusplus
>  extern "C" {
>  #endif /* __cplusplus */
>
> -#define ALTCYCV_IRQ_CPU_0 32
> -#define ALTCYCV_IRQ_CPU_1 33
> -#define ALTCYCV_IRQ_L2_CACHE 34
> -#define ALTCYCV_IRQ_OCM 35
> -#define ALTCYCV_IRQ_PMU_0 37
> -#define ALTCYCV_IRQ_PMU_1 38
> -#define ALTCYCV_IRQ_XADC 39
> -#define ALTCYCV_IRQ_DVI 40
> -#define ALTCYCV_IRQ_SWDT 41
> -#define ALTCYCV_IRQ_TTC_0_0 42
> -#define ALTCYCV_IRQ_TTC_1_0 43
> -#define ALTCYCV_IRQ_TTC_2_0 44
> -#define ALTCYCV_IRQ_DMAC_ABORT 45
> -#define ALTCYCV_IRQ_DMAC_0 46
> -#define ALTCYCV_IRQ_DMAC_1 47
> -#define ALTCYCV_IRQ_DMAC_2 48
> -#define ALTCYCV_IRQ_DMAC_3 49
> -#define ALTCYCV_IRQ_SMC 50
> -#define ALTCYCV_IRQ_QUAD_SPI 51
> -#define ALTCYCV_IRQ_GPIO 52
> -#define ALTCYCV_IRQ_USB_0 53
> -#define ALTCYCV_IRQ_ETHERNET_0 54
> -#define ALTCYCV_IRQ_ETHERNET_0_WAKEUP 55
> -#define ALTCYCV_IRQ_SDIO_0 56
> -#define ALTCYCV_IRQ_I2C_0 57
> -#define ALTCYCV_IRQ_SPI_0 58
> -#define ALTCYCV_IRQ_UART_0 59
> -#define ALTCYCV_IRQ_CAN_0 60
> -#define ALTCYCV_IRQ_FPGA_0 61
> -#define ALTCYCV_IRQ_FPGA_1 62
> -#define ALTCYCV_IRQ_FPGA_2 63
> -#define ALTCYCV_IRQ_FPGA_3 64
> -#define ALTCYCV_IRQ_FPGA_4 65
> -#define ALTCYCV_IRQ_FPGA_5 66
> -#define ALTCYCV_IRQ_FPGA_6 67
> -#define ALTCYCV_IRQ_FPGA_7 68
> -#define ALTCYCV_IRQ_TTC_0_1 69
> -#define ALTCYCV_IRQ_TTC_1_1 70
> -#define ALTCYCV_IRQ_TTC_2_1 71
> -#define ALTCYCV_IRQ_DMAC_4 72
> -#define ALTCYCV_IRQ_DMAC_5 73
> -#define ALTCYCV_IRQ_DMAC_6 74
> -#define ALTCYCV_IRQ_DMAC_7 75
> -#define ALTCYCV_IRQ_USB_1 76
> -#define ALTCYCV_IRQ_ETHERNET_1 77
> -#define ALTCYCV_IRQ_ETHERNET_1_WAKEUP 78
> -#define ALTCYCV_IRQ_SDIO_1 79
> -#define ALTCYCV_IRQ_I2C_1 80
> -#define ALTCYCV_IRQ_SPI_1 81
> -#define ALTCYCV_IRQ_UART_1 82
> -#define ALTCYCV_IRQ_CAN_1 83
> -#define ALTCYCV_IRQ_FPGA_8 84
> -#define ALTCYCV_IRQ_FPGA_9 85
> -#define ALTCYCV_IRQ_FPGA_10 86
> -#define ALTCYCV_IRQ_FPGA_11 87
> -#define ALTCYCV_IRQ_FPGA_12 88
> -#define ALTCYCV_IRQ_FPGA_13 89
> -#define ALTCYCV_IRQ_FPGA_14 90
> -#define ALTCYCV_IRQ_FPGA_15 91
> -#define ALTCYCV_IRQ_PARITY 92
> -
> -#define BSP_INTERRUPT_VECTOR_MIN 0
> -#define BSP_INTERRUPT_VECTOR_MAX 92
> +/* Use interrupt IDs as defined in alt_interrupt_common.h */
> +#define BSP_INTERRUPT_VECTOR_MIN ALT_INT_INTERRUPT_SGI0
> +#define BSP_INTERRUPT_VECTOR_MAX ALT_INT_INTERRUPT_RAM_ECC_UNCORRECTED_IRQ
>
>  #ifdef __cplusplus
>  }
> @@ -97,4 +38,4 @@ extern "C" {
>
>  #endif /* ASM */
>
> -#endif /* LIBBSP_ARM_ALTCYCV_IRQ_H */
> +#endif /* LIBBSP_ARM_ALTCYCV_IRQ_H */
> \ No newline at end of file
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/include/network.h b/c/src/lib/libbsp/arm/altera-cyclone-v/include/network.h
> new file mode 100644
> index 0000000..7a4553b
> --- /dev/null
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/include/network.h
> @@ -0,0 +1,59 @@
> +/**
> + * @file network.h
> + *
> + * @ingroup [GROUP NAME]
> + *
> + * @brief Network Driver
> + *
> + * API header for the network driver of this BSP
> + */
> +
> +/*
> + * Copyright (c) 2013 embedded brains GmbH.  All rights reserved.
> + *
> + *  embedded brains GmbH
> + *  Dornierstr. 4
> + *  82178 Puchheim
> + *  Germany
> + *  <rtems at embedded-brains.de>
> + *
> + * The license and distribution terms for this file may be
> + * found in the file LICENSE in this distribution or at
> + * http://www.rtems.org/license/LICENSE.
> + */
> +
> +#ifndef NETWORK_H_
> +#define NETWORK_H_
> +
> +#include <rtems/rtems_bsdnet.h>
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif /* __cplusplus */
> +
> +/** @brief Number of semaphores created by the driver */
> +#define BSP_NETWORK_SEMAPHORE_COUNT 1
> +
> +/** @brief Number of tasks created by the driver */
> +#define BSP_NETWORK_TASK_COUNT 2
> +
> +/** @brief Network interface attach detach
> + *
> + * Attaches a network interface.
> + * NOTE: Detaching is not supported!
> + */
> +int network_if_attach_detach(
> +  struct rtems_bsdnet_ifconfig *config,
> +  int                           attaching );
> +
> +/** @brief Alias */
> +#define NETWORK_IF_ATTACH_DETACH network_if_attach_detach
> +
> +/** @brief Interface name */
> +#define NETWORK_IF_NAME "eth0"
> +
> +#ifdef __cplusplus
> +}
> +#endif /* __cplusplus */
> +
> +#endif /* NETWORK_H_ */
> \ No newline at end of file
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/include/nocache-heap.h b/c/src/lib/libbsp/arm/altera-cyclone-v/include/nocache-heap.h
> new file mode 100644
> index 0000000..d827584
> --- /dev/null
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/include/nocache-heap.h
> @@ -0,0 +1,49 @@
> +/**
> + * @file nocache-heap.h
> + *
> + * @ingroup [GROUP NAME]
> + *
> + * @brief Heap handling for uncached RAM
> + */
> +
> +/*
> + * Copyright (c) 2013 embedded brains GmbH.  All rights reserved.
> + *
> + *  embedded brains GmbH
> + *  Dornierstr. 4
> + *  82178 Puchheim
> + *  Germany
> + *  <rtems at embedded-brains.de>
> + *
> + * The license and distribution terms for this file may be
> + * found in the file LICENSE in this distribution or at
> + * http://www.rtems.org/license/LICENSE.
> + */
> +
> +#ifndef NOCACHE_HEAP_H_
> +#define NOCACHE_HEAP_H_
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif /* __cplusplus */
> +
> +/** @brief Nocache alloc.
> + *
> + * Allocate memory from uncached heap.
> + * @param   size  Number of bytes to be allocated.
> + * @retval  Pointer to the allocated memory.
> + */
> +void *nocache_malloc( const size_t size );
> +
> +/** @brief Nocache free.
> + *
> + * Release memory from uncached heap.
> + * @param ptr Address of the memory to be released.
> + */
> +void nocache_free( void *ptr );
> +
> +#ifdef __cplusplus
> +}
> +#endif /* __cplusplus */
> +
> +#endif /* NOCACHE_HEAP_H_ */
> \ No newline at end of file
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/network/network.c b/c/src/lib/libbsp/arm/altera-cyclone-v/network/network.c
> new file mode 100644
> index 0000000..e1a0b29
> --- /dev/null
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/network/network.c
> @@ -0,0 +1,1241 @@
> +/**
> + * @file network.c
> + *
> + * @ingroup [GROUP NAME]
> + *
> + * @brief Network Driver
> + *
> + * This driver is a wrapper for the DWMAC 1000 driver from libchip.
> + * The DWMAC 1000 driver is an on-chip Synopsys IP Ethernet controllers
> + */
> +
> +/*
> + * Copyright (c) 2013 embedded brains GmbH.  All rights reserved.
> + *
> + *  embedded brains GmbH
> + *  Dornierstr. 4
> + *  82178 Puchheim
> + *  Germany
> + *  <rtems at embedded-brains.de>
> + *
> + * The license and distribution terms for this file may be
> + * found in the file LICENSE in this distribution or at
> + * http://www.rtems.org/license/LICENSE.
> + */
> +
> +
> +#include <rtems.h>
> +
> +#if defined(RTEMS_NETWORKING)
> +
> +#include <assert.h>
> +#include <stdint.h>
> +#include <stdlib.h>
> +#include <errno.h>
> +#include <rtems.h>
> +#include <rtems/config.h>
> +#include <bsp.h>
> +#include <bsp/irq.h>
> +#include <bsp/linker-symbols.h>
> +#include <bsp/alt_clock_manager.h>
> +#include <bsp/alt_interrupt_common.h>
> +#include <bsp/alt_generalpurpose_io.h>
> +
> +//#include <bsp/network.h>
> +#include "socal/alt_emac.h"
> +#include "socal/alt_rstmgr.h"
> +#include "socal/alt_sysmgr.h"
> +#include "socal/hps.h"
> +#include "socal/socal.h"
> +#include <libchip/dwmac.h>
> +#include "../include/nocache-heap.h" /* TODO: Convert to #include <bsp/nocache-heap.h> */
> +
> +/** @brief Pin mask for the interrupt from the ethernet PHY */
> +#define NETWORK_PIN_MASK_PHY_INTERRUPT 0x00000040U
> +
> +/** @brief Ethernet PHY status */
> +typedef enum {
> +  /** @brief The ethernet PHY is off */
> +  NETWORK_IF_PHY_STATUS_OFF,
> +
> +  /** @brief The ethernet PHY is on an initialized, but stopped */
> +  NETWORK_IF_PHY_STATUS_STOPPED,
> +
> +  /** @brief The ethernet PHY is started and will generate requested events */
> +  NETWORK_IF_PHY_STATUS_STARTED,
> +
> +  /** @brief Number of ethernet PHY statuses */
> +  NETWORK_IF_PHY_STATUS_COUNT
> +} network_if_phy_status;
> +
> +/** @brief Phy context
> + *
> + * ethernet PHY device context
> + */
> +typedef struct {
> +  /** @brief PHY device status */
> +  network_if_phy_status status;
> +
> +  /** @brief An interrupt mask which corresponds to currently requested events */
> +  uint16_t irq_mask;
> +} network_if_phy_context;
> +
> +/** @brief Phy context initializer
> + *
> + * @retval Initialized network PHY context
> + */
> +#define NETWORK_IF_PHY_CONTEXT_INITIALIZER( \
> +    ) \
> +  { \
> +    NETWORK_IF_PHY_STATUS_OFF, \
> +    0 \
> +  }
> +
> +/** @brief Network interface controller ID
> + *
> + * Identifies the network interface controller handled by the driver
> + */
> +typedef enum {
> +  /** @brief ID for EMAC0 */
> +  NETWORK_IF_NIC_ID_EMAC0,
> +
> +  /** @brief ID for EMAC1 */
> +  NETWORK_IF_NIC_ID_EMAC1,
> +
> +  /** @brief Number of network interface controller IDs */
> +  NETWORK_IF_NIC_ID_COUNT
> +} network_if_nic_id;
> +
> +/** @brief Network interface context
> + *
> + * Context for the micro controller specific part of the DWMAC 1000 n
> + * etwork driver
> + */
> +typedef struct {
> +  /** @brief Network interface controller ID */
> +  network_if_nic_id nic_id;
> +
> +  /** @brief Driver context
> +   *
> +   * Address of the context of the low level DWMAC 1000 driver from libchip */
> +  void *driver_context;
> +
> +  /** @brief Ethernet PHY context */
> +  network_if_phy_context phy;
> +
> +  /* TODO: Create network context on micro controller level */
> +} network_if_context;
> +
> +/** @brief Network interface context initializer
> + *
> + * Initializer for the context of a network interface
> + * @param nic_id          ID of the network interface controller
> + * @param driver_context Address of the context of the low level DWMAC 1000
> + *                       driver from libchip
> + * @retval Initialized network interface context
> + */
> +#define NETWORK_IF_CONTEXT_INITIALIZER( \
> +    nic_id, \
> +    driver_context \
> +    ) \
> +  { \
> +    nic_id, \
> +    driver_context, \
> +    NETWORK_IF_PHY_CONTEXT_INITIALIZER() \
> +  }
> +
> +/*********************************************************************************
> +* Helper Methods
> +*********************************************************************************/
> +
> +/** @brief Altera status code to errno
> + *
> + * Convert Altera status code to errno error number
> + * @param status  Altera status code as returned by methods from Alteras HWLib
> + * @retval Converted errno error number from errno.h
> + */
> +static int network_if_altera_status_code_to_errno( ALT_STATUS_CODE status )
> +{
> +  int eno = 0;
> +
> +  switch ( status ) {
> +    /*!
> +     * Indicates a FALSE condition.
> +     */
> +    case ALT_E_FALSE:
> +
> +    /*!
> +     * Indicates a TRUE condition.
> +     */
> +    case ALT_E_TRUE:
> +
> +      /*! The operation was successful. */
> +      /* case ALT_E_SUCCESS: */
> +      eno = 0;
> +      break;
> +
> +    /*! The operation failed. */
> +    case ALT_E_ERROR:
> +
> +    /*! An invalid option was selected. */
> +    case ALT_E_INV_OPTION:
> +      eno = EIO; /* I/O error */
> +      break;
> +
> +    /*! FPGA configuration error detected.*/
> +    case ALT_E_FPGA_CFG:
> +      eno = ECANCELED; /* Operation canceled */
> +      break;
> +
> +    /*! FPGA CRC error detected. */
> +    case ALT_E_FPGA_CRC:
> +
> +    /*! An error occurred on the FPGA configuration bitstream input source. */
> +    case ALT_E_FPGA_CFG_STM:
> +      eno = EPROTO; /* Protocol error */
> +      break;
> +
> +    /*! The FPGA is powered off. */
> +    case ALT_E_FPGA_PWR_OFF:
> +      eno = ENODEV; /* No such device */
> +      break;
> +
> +    /*! The SoC does not currently control the FPGA. */
> +    case ALT_E_FPGA_NO_SOC_CTRL:
> +
> +    /*! The FPGA is not in USER mode. */
> +    case ALT_E_FPGA_NOT_USER_MODE:
> +      eno = EPERM; /* Not super-user */
> +      break;
> +
> +    /*! An argument violates a range constraint. */
> +    case ALT_E_ARG_RANGE:
> +
> +    /*! A bad argument value was passed. */
> +    case ALT_E_BAD_ARG:
> +
> +    /*! The argument value is reserved or unavailable. */
> +    case ALT_E_RESERVED:
> +      eno = EINVAL; /* Invalid argument */
> +      break;
> +
> +    /*! The operation is invalid or illegal. */
> +    case ALT_E_BAD_OPERATION:
> +
> +    /*! The version ID is invalid. */
> +    case ALT_E_BAD_VERSION:
> +      eno = EFAULT; /* Bad address */
> +      break;
> +
> +    /*! An operation or response timeout period expired. */
> +    case ALT_E_TMO:
> +
> +    /*! A clock is not enabled or violates an operational constraint. */
> +    case ALT_E_BAD_CLK:
> +      eno = ETIME; /* Timer expired */
> +      break;
> +
> +    /*! The buffer does not contain enough free space for the operation. */
> +    case ALT_E_BUF_OVF:
> +      eno = ENOMEM; /* Not enough core */
> +      break;
> +    default:
> +
> +      /* Unknown case. Implement it! */
> +      assert( 0 == 1 );
> +      eno = EIO;
> +      break;
> +  }
> +
> +  return eno;
> +}
> +
> +/** @brief PHY check chip ID
> + *
> + * Check the chip-ID of the KSZ8842 ethernet PHY.
> + * @param context Address of the network context
> + * @retval  0 if chip could be identified, error code from errno.h otherwise.
> + */
> +static int network_if_phy_check_chip_id( network_if_context *context )
> +{
> +  int      eno;
> +  uint16_t reg;
> +
> +  eno = dwmac_if_read_from_phy(
> +    context->driver_context,
> +    2,
> +    &reg
> +    );
> +
> +  if ( eno == 0 ) {
> +    if ( reg != 0x0022 ) { /* PHY ID part 1 */
> +      eno = ENXIO;
> +    } else {
> +      eno = dwmac_if_read_from_phy(
> +        context->driver_context,
> +        3,
> +        &reg
> +        );
> +
> +      if ( eno == 0 ) {
> +        if ( ( ( reg & 0xFC00 ) >> 10 ) != 0x0005 ) { /* PHY ID part 2 */
> +          eno = ENXIO;
> +        } else if ( ( ( reg & 0x03F0 ) >> 4 ) != 0x0021 ) { /* Manufacturers model number */
> +          eno = ENXIO;
> +        }
> +      }
> +    }
> +  }
> +
> +  return eno;
> +}
> +
> +/*********************************************************************************
> +* Callback Methods
> +*********************************************************************************/
> +
> +/** @brief NIC enable
> + *
> + * Enables (powers up) the network interface card.
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +static int network_if_nic_enable( void *arg )
> +{
> +  int                 eno               = 0;
> +  network_if_context *context           = (network_if_context *) arg;
> +  ALT_CLK_t           module_clk        = ALT_CLK_EMAC0;
> +  uint32_t            permodrst_clr_msk = ALT_RSTMGR_PERMODRST_EMAC0_CLR_MSK;
> +
> +  switch ( context->nic_id ) {
> +    case NETWORK_IF_NIC_ID_EMAC0:
> +    {
> +      module_clk        = ALT_CLK_EMAC0;
> +      permodrst_clr_msk = ALT_RSTMGR_PERMODRST_EMAC0_CLR_MSK;
> +    }
> +    break;
> +    case NETWORK_IF_NIC_ID_EMAC1:
> +    {
> +      module_clk        = ALT_CLK_EMAC1;
> +      permodrst_clr_msk = ALT_RSTMGR_PERMODRST_EMAC1_CLR_MSK;
> +    }
> +    break;
> +
> +    case NETWORK_IF_NIC_ID_COUNT:
> +
> +      /* Invalid case */
> +      eno = ENODEV;
> +      break;
> +    default:
> +
> +      /* Unknown case */
> +      eno = ENOTSUP;
> +      break;
> +  }
> +
> +  /* Pin mux configuration is handled by the Preloader. Thus no
> +   * pin mux configuration here. */
> +
> +  /* Enable the clock for the EMAC module */
> +  if ( eno == 0 ) {
> +    if ( ALT_E_FALSE == alt_clk_is_enabled( module_clk ) ) {
> +      ALT_STATUS_CODE status = alt_clk_clock_enable( module_clk );
> +      eno = network_if_altera_status_code_to_errno( status );
> +    }
> +  }
> +
> +  /* Finish reset for the EMAC module */
> +  if ( eno == 0 ) {
> +    uint32_t reg = alt_read_word( ALT_RSTMGR_PERMODRST_ADDR );
> +    alt_write_word( ALT_RSTMGR_PERMODRST_ADDR, reg & permodrst_clr_msk );
> +  }
> +
> +  return eno;
> +}
> +
> +/** @brief NIC disable.
> + *
> + * Disables (powers down) the network interface card.
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +static int network_if_nic_disable( void *arg )
> +{
> +  int                 eno               = 0;
> +  network_if_context *context           = (network_if_context *) arg;
> +  ALT_CLK_t           module_clk        = ALT_CLK_EMAC0;
> +  uint32_t            permodrst_set_msk = ALT_RSTMGR_PERMODRST_EMAC0_SET_MSK;
> +
> +  switch ( context->nic_id ) {
> +    case NETWORK_IF_NIC_ID_EMAC0:
> +      module_clk        = ALT_CLK_EMAC0;
> +      permodrst_set_msk = ALT_RSTMGR_PERMODRST_EMAC0_SET_MSK;
> +      break;
> +    case NETWORK_IF_NIC_ID_EMAC1:
> +      module_clk        = ALT_CLK_EMAC1;
> +      permodrst_set_msk = ALT_RSTMGR_PERMODRST_EMAC1_SET_MSK;
> +      break;
> +
> +    case NETWORK_IF_NIC_ID_COUNT:
> +
> +      /* Invalid case */
> +      eno = ENODEV;
> +      break;
> +    default:
> +
> +      /* Unknown case */
> +      eno = ENOTSUP;
> +      break;
> +  }
> +
> +  /* Enter rest status for the EMAC module */
> +  if ( eno == 0 ) {
> +    uint32_t reg = alt_read_word( ALT_RSTMGR_PERMODRST_ADDR );
> +    alt_write_word( ALT_RSTMGR_PERMODRST_ADDR, reg | permodrst_set_msk );
> +  }
> +
> +  /* Disable the clock for the EMAC module */
> +  if ( eno == 0 ) {
> +    if ( ALT_E_TRUE == alt_clk_is_enabled( module_clk ) ) {
> +      ALT_STATUS_CODE status = alt_clk_clock_disable( module_clk );
> +      eno = network_if_altera_status_code_to_errno( status );
> +    }
> +  }
> +
> +  return eno;
> +}
> +
> +/** @brief PHY disable.
> + *
> + * Disables (powers down) the network PHY.
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +static int network_if_phy_disable( void *arg )
> +{
> +  int                 eno  = 0;
> +  network_if_context *self = (network_if_context *) arg;
> +  uint32_t            mask;
> +  ALT_STATUS_CODE     status_code;
> +
> +  /* The power pin of the PHY is hard wire to board power control and
> +   * the PHY supports interrupts, This means we can not power it down
> +   * and we don't need to stop a timer for polling PHY events. */
> +
> +  status_code = alt_gpio_port_int_mask_set(
> +    ALT_GPIO_PORTB,
> +    NETWORK_PIN_MASK_PHY_INTERRUPT,
> +    NETWORK_PIN_MASK_PHY_INTERRUPT
> +    );
> +  eno = network_if_altera_status_code_to_errno( status_code );
> +
> +  if ( eno == 0 ) {
> +    mask        = alt_gpio_port_int_enable_get( ALT_GPIO_PORTB );
> +    status_code = alt_gpio_port_int_enable(
> +      ALT_GPIO_PORTB,
> +      mask & ~NETWORK_PIN_MASK_PHY_INTERRUPT
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +  }
> +
> +  if ( eno == 0 ) {
> +    status_code = alt_gpio_port_int_status_clear(
> +      ALT_GPIO_PORTB,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +  }
> +
> +  if ( eno == 0 ) {
> +    self->phy.status = NETWORK_IF_PHY_STATUS_OFF;
> +  }
> +
> +  return eno;
> +}
> +
> +/** @brief PHY enable.
> + *
> + * Enables (powers up) the network PHY.
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +static int network_if_phy_enable( void *arg )
> +{
> +  int                 eno  = 0;
> +  network_if_context *self = (network_if_context *) arg;
> +  ALT_STATUS_CODE     status_code;
> +
> +  /* The power pin of the PHY is hard wire to board power control and
> +   * the PHY supports interrupts, This means we can not power it up
> +   * and we don't need to start a timer for polling PHY events. */
> +
> +  eno = network_if_phy_check_chip_id( self );
> +
> +  if ( eno == 0 ) {
> +    /* The phy is already enabled and we will reset it */
> +    eno = network_if_phy_disable( self );
> +
> +    if ( eno == 0 ) {
> +      rtems_task_wake_after( rtems_clock_get_ticks_per_second() / 100 );
> +    }
> +  } else {
> +    eno = 0;
> +  }
> +
> +  status_code = alt_gpio_port_datadir_set(
> +    ALT_GPIO_PORTB,
> +    NETWORK_PIN_MASK_PHY_INTERRUPT,
> +    0
> +    );
> +  eno = network_if_altera_status_code_to_errno( status_code );
> +
> +  if ( eno == 0 ) {
> +    status_code = alt_gpio_port_int_type_set(
> +      ALT_GPIO_PORTB,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT,
> +      0
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +  }
> +
> +  if ( eno == 0 ) {
> +    status_code = alt_gpio_port_int_pol_set(
> +      ALT_GPIO_PORTB,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT,
> +      1
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +  }
> +
> +  if ( eno == 0 ) {
> +    status_code = alt_gpio_port_debounce_set(
> +      ALT_GPIO_PORTB,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT,
> +      0
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +  }
> +
> +  if ( eno == 0 ) {
> +    status_code = alt_gpio_port_int_enable(
> +      ALT_GPIO_PORTB,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +  }
> +
> +  if ( eno == 0 ) {
> +    status_code = alt_gpio_port_int_mask_set(
> +      ALT_GPIO_PORTB,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT,
> +      0
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +  }
> +
> +  if ( eno == 0 ) {
> +    status_code = alt_gpio_port_int_status_clear(
> +      ALT_GPIO_PORTB,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +  }
> +
> +  if ( eno == 0 ) {
> +    self->phy.status = NETWORK_IF_PHY_STATUS_STOPPED;
> +  }
> +
> +  return eno;
> +}
> +
> +/** @brief Clear phy event status.
> + *
> + * Clears all PHY event statuses.
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +int network_if_phy_event_status_clear( void *arg )
> +{
> +  int             eno;
> +  ALT_STATUS_CODE status_code;
> +
> +  (void) arg;
> +
> +  /* Clear the interrupt status */
> +  status_code = alt_gpio_port_int_status_clear(
> +    ALT_GPIO_PORTB,
> +    NETWORK_PIN_MASK_PHY_INTERRUPT
> +    );
> +  eno = network_if_altera_status_code_to_errno( status_code );
> +
> +  if ( eno == 0 ) {
> +    /* Unmask the interrupt (was masked within interrupt handler) */
> +    status_code = alt_gpio_port_int_mask_set(
> +      ALT_GPIO_PORTB,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT,
> +      0
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +  }
> +
> +  return eno;
> +}
> +
> +/**
> + * @brief Get the PHY event status.
> + *
> + * Reports status on PHY events (e.g. PHY interrupts).
> + * @param[in]  arg        The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @param[out] event_set  Pointer to a buffer for a set of events for which a
> + *                        PHY status change was detected.
> + *                        For events see @see dwmac_phy_event.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +int network_if_phy_events_status_get(
> +  void            *arg,
> +  dwmac_phy_event *event_set )
> +{
> +  int                 eno  = 0;
> +  uint16_t            reg  = 0;
> +  network_if_context *self = (network_if_context *) arg;
> +
> +  eno = dwmac_if_read_from_phy(
> +    self->driver_context,
> +    0x1B,
> +    &reg
> +    );
> +
> +  if ( eno == 0 ) {
> +    if ( ( reg & 0x80 ) != 0 ) {
> +      *event_set |= PHY_EVENT_JABBER;
> +    }
> +
> +    if ( ( reg & 0x40 ) != 0 ) {
> +      *event_set |= PHY_EVENT_RECEIVE_ERROR;
> +    }
> +
> +    if ( ( reg & 0x20 ) != 0 ) {
> +      *event_set |= PHY_EVENT_PAGE_RECEIVE;
> +    }
> +
> +    if ( ( reg & 0x10 ) != 0 ) {
> +      *event_set |= PHY_EVENT_PARALLEL_DETECT_FAULT;
> +    }
> +
> +    if ( ( reg & 0x08 ) != 0 ) {
> +      *event_set |= PHY_EVENT_LINK_PARTNER_ACK;
> +    }
> +
> +    if ( ( reg & 0x04 ) != 0 ) {
> +      *event_set |= PHY_EVENT_LINK_DOWN;
> +    }
> +
> +    if ( ( reg & 0x02 ) != 0 ) {
> +      *event_set |= PHY_EVENT_REMOTE_FAULT;
> +    }
> +
> +    if ( ( reg & 0x01 ) != 0 ) {
> +      *event_set |= PHY_EVENT_LINK_UP;
> +    }
> +  }
> +
> +  return eno;
> +}
> +
> +/** @brief Network PHY interrupt handler
> + *
> + * Handling method for interrupts from the PHY.
> + * @param arg Address of the network interface context
> + */
> +static void network_if_phy_interrupt_handler( void *arg )
> +{
> +  int                 eno  = 0;
> +  network_if_context *self = (network_if_context *) arg;
> +  uint32_t            reg;
> +
> +  reg = alt_gpio_port_int_status_get( ALT_GPIO_PORTB );
> +
> +  if ( reg & NETWORK_PIN_MASK_PHY_INTERRUPT ) {
> +    /* We have a level interrupt and we expect the driver to do
> +     * the actual interrupt handling from within a task context.
> +     * Thus we have to mask the interrupt. A call to
> +     * network_if_phy_event_status_clear() will unmask it */
> +    ALT_STATUS_CODE status_code = alt_gpio_port_int_mask_set(
> +      ALT_GPIO_PORTB,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT,
> +      NETWORK_PIN_MASK_PHY_INTERRUPT
> +      );
> +    eno = network_if_altera_status_code_to_errno( status_code );
> +
> +    if ( eno == 0 ) {
> +      eno = dwmac_if_handle_phy_event(
> +        self->driver_context
> +        );
> +    }
> +  }
> +
> +  assert( eno == 0 );
> +}
> +
> +/** @brief PHY event enable.
> + *
> + * Enables generation of events for an event set.
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @param[in] event_set   Set of events. For these events shall get generated
> + *                        upon PHY status change.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +static int network_if_phy_event_enable(
> +  void                 *arg,
> +  const dwmac_phy_event event_set )
> +{
> +  int                   eno        = 0;
> +  uint16_t              reg        = 0;
> +  network_if_context   *self       = (network_if_context *) arg;
> +  network_if_phy_status old_status = self->phy.status;
> +
> +  if ( arg != NULL ) {
> +    switch ( self->phy.status ) {
> +      case NETWORK_IF_PHY_STATUS_OFF:
> +        break;
> +      case NETWORK_IF_PHY_STATUS_STOPPED:
> +        break;
> +      case NETWORK_IF_PHY_STATUS_STARTED:
> +      {
> +        eno = dwmac_if_read_from_phy(
> +          self->driver_context,
> +          0x1B,
> +          &reg
> +          );
> +
> +        if ( eno == 0 ) {
> +          /* Disable all interrupts, but leave interrupt status bits untouched */
> +          reg &= 0x00FF;
> +          eno  = dwmac_if_write_to_phy(
> +            self->driver_context,
> +            0x1B,
> +            reg
> +            );
> +        }
> +
> +        if ( eno == 0 ) {
> +          self->phy.irq_mask = 0;
> +          self->phy.status   = NETWORK_IF_PHY_STATUS_STOPPED;
> +        }
> +      }
> +      break;
> +      case NETWORK_IF_PHY_STATUS_COUNT:
> +      {
> +        /* Invalid case */
> +        assert( self->phy.status != NETWORK_IF_PHY_STATUS_COUNT );
> +        eno = ENOTSUP;
> +      }
> +      break;
> +      default:
> +      {
> +        /* Unknown case */
> +        assert(
> +          self->phy.status == NETWORK_IF_PHY_STATUS_OFF
> +          || self->phy.status == NETWORK_IF_PHY_STATUS_STOPPED
> +          || self->phy.status == NETWORK_IF_PHY_STATUS_STARTED
> +          );
> +        eno = ENOTSUP;
> +      }
> +      break;
> +    }
> +
> +    if ( eno == 0 ) {
> +      /* Select interrupts to enable */
> +      if ( ( event_set & PHY_EVENT_JABBER ) != 0 ) {
> +        reg |= 0x8000;
> +      }
> +
> +      if ( ( event_set & PHY_EVENT_RECEIVE_ERROR ) != 0 ) {
> +        reg |= 0x4000;
> +      }
> +
> +      if ( ( event_set & PHY_EVENT_PAGE_RECEIVE ) != 0 ) {
> +        reg |= 0x2000;
> +      }
> +
> +      if ( ( event_set & PHY_EVENT_PARALLEL_DETECT_FAULT ) != 0 ) {
> +        reg |= 0x1000;
> +      }
> +
> +      if ( ( event_set & PHY_EVENT_LINK_PARTNER_ACK ) != 0 ) {
> +        reg |= 0x0800;
> +      }
> +
> +      if ( ( event_set & PHY_EVENT_LINK_DOWN ) != 0 ) {
> +        reg |= 0x0400;
> +      }
> +
> +      if ( ( event_set & PHY_EVENT_REMOTE_FAULT ) != 0 ) {
> +        reg |= 0x0200;
> +      }
> +
> +      if ( ( event_set & PHY_EVENT_LINK_UP ) != 0 ) {
> +        reg |= 0x100;
> +      }
> +
> +      switch ( old_status ) {
> +        case NETWORK_IF_PHY_STATUS_OFF:
> +          break;
> +        case NETWORK_IF_PHY_STATUS_STOPPED:
> +          break;
> +        case NETWORK_IF_PHY_STATUS_STARTED:
> +        {
> +          if ( eno == 0 ) {
> +            /* Modify interrupt enable bits, but leave interrupt status bits untouched */
> +            eno = dwmac_if_write_to_phy(
> +              self->driver_context,
> +              0x1B,
> +              reg & 0xFF00
> +              );
> +          }
> +        }
> +        break;
> +        case NETWORK_IF_PHY_STATUS_COUNT:
> +        {
> +          /* Invalid case */
> +          assert( self->phy.status != NETWORK_IF_PHY_STATUS_COUNT );
> +          eno = ENOTSUP;
> +        }
> +        break;
> +        default:
> +        {
> +          /* Unknown case */
> +          assert(
> +            self->phy.status == NETWORK_IF_PHY_STATUS_OFF
> +            || self->phy.status == NETWORK_IF_PHY_STATUS_STOPPED
> +            || self->phy.status == NETWORK_IF_PHY_STATUS_STARTED
> +            );
> +          eno = ENOTSUP;
> +        }
> +        break;
> +      }
> +
> +      if ( eno == 0 ) {
> +        self->phy.irq_mask = reg & 0xFF00;
> +      }
> +    }
> +  }
> +
> +  return eno;
> +}
> +
> +/**
> + * @brief Stop the network PHY.
> + *
> + * Do anything necessary to stop the network PHY (stop generating events, ...).
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +int network_if_phy_stop( void *arg )
> +{
> +  int                 eno  = 0;
> +  rtems_status_code   sc   = RTEMS_SUCCESSFUL;
> +  network_if_context *self = (network_if_context *) arg;
> +
> +  switch ( self->phy.status ) {
> +    case NETWORK_IF_PHY_STATUS_OFF:
> +      break;
> +    case NETWORK_IF_PHY_STATUS_STOPPED:
> +      break;
> +    case NETWORK_IF_PHY_STATUS_STARTED:
> +    {
> +      /* Remove any selected interrupts */
> +      eno = dwmac_if_write_to_phy(
> +        self->driver_context,
> +        0x1B,
> +        0
> +        );
> +
> +      if ( eno == 0 ) {
> +        uint16_t reg;
> +
> +        /* Clear interrupt status bits by reading them */
> +        eno = dwmac_if_read_from_phy(
> +          self->driver_context,
> +          0x1B,
> +          &reg
> +          );
> +      }
> +
> +      if ( eno == 0 ) {
> +        self->phy.irq_mask = 0;
> +
> +        /* Remove interrupt handler */
> +        sc = rtems_interrupt_handler_remove(
> +          ALT_INT_INTERRUPT_GPIO1,
> +          network_if_phy_interrupt_handler,
> +          self
> +          );
> +        eno = rtems_status_code_to_errno( sc );
> +
> +        if ( eno == 0 ) {
> +          self->phy.status = NETWORK_IF_PHY_STATUS_STOPPED;
> +        }
> +      }
> +    }
> +    break;
> +    case NETWORK_IF_PHY_STATUS_COUNT:
> +    {
> +      /* Invalid case */
> +      assert( self->phy.status != NETWORK_IF_PHY_STATUS_COUNT );
> +      eno = ENOTSUP;
> +    }
> +    break;
> +    default:
> +    {
> +      /* Unknown case */
> +      assert(
> +        self->phy.status == NETWORK_IF_PHY_STATUS_OFF
> +        || self->phy.status == NETWORK_IF_PHY_STATUS_STOPPED
> +        || self->phy.status == NETWORK_IF_PHY_STATUS_STARTED
> +        );
> +      eno = ENOTSUP;
> +    }
> +    break;
> +  }
> +
> +  return eno;
> +}
> +
> +/**
> + * @brief Start the network PHY.
> + *
> + * Do anything necessary to start the network PHY (start generating
> + * events, ...).
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +int network_if_phy_start( void *arg )
> +{
> +  int                 eno  = 0;
> +  rtems_status_code   sc   = RTEMS_SUCCESSFUL;
> +  network_if_context *self = (network_if_context *) arg;
> +
> +  switch ( self->phy.status ) {
> +    case NETWORK_IF_PHY_STATUS_OFF:
> +    {
> +      assert( self->phy.status != NETWORK_IF_PHY_STATUS_OFF );
> +      eno = EHOSTDOWN;
> +    }
> +    break;
> +    case NETWORK_IF_PHY_STATUS_STOPPED:
> +
> +      /* Disable all interrupts */
> +      eno = dwmac_if_write_to_phy(
> +        self->driver_context,
> +        0x1B,
> +        0
> +        );
> +
> +      if ( eno == 0 ) {
> +      }
> +
> +      if ( eno == 0 ) {
> +        /* Install interrupt handler */
> +        sc = rtems_interrupt_handler_install(
> +          ALT_INT_INTERRUPT_GPIO1,
> +          NULL,
> +          RTEMS_INTERRUPT_SHARED,
> +          network_if_phy_interrupt_handler,
> +          self
> +          );
> +        eno = rtems_status_code_to_errno( sc );
> +      }
> +
> +      if ( eno == 0 ) {
> +        /* Enable interrupts */
> +        eno = dwmac_if_write_to_phy(
> +          self->driver_context,
> +          0x1B,
> +          self->phy.irq_mask
> +          );
> +      }
> +
> +      break;
> +    case NETWORK_IF_PHY_STATUS_STARTED:
> +    {
> +      uint16_t irq_mask = self->phy.irq_mask;
> +
> +      /* Re-start the phy */
> +      eno = network_if_phy_stop( self );
> +
> +      if ( eno == 0 ) {
> +        self->phy.irq_mask = irq_mask;
> +
> +        eno                = network_if_phy_start(
> +          self
> +          );
> +      }
> +    }
> +    break;
> +
> +    case NETWORK_IF_PHY_STATUS_COUNT:
> +    {
> +      /* Invalid case */
> +      assert( self->phy.status != NETWORK_IF_PHY_STATUS_COUNT );
> +      eno = ENOTSUP;
> +    }
> +    break;
> +    default:
> +    {
> +      /* Unknown case */
> +      assert(
> +        self->phy.status == NETWORK_IF_PHY_STATUS_OFF
> +        || self->phy.status == NETWORK_IF_PHY_STATUS_STOPPED
> +        || self->phy.status == NETWORK_IF_PHY_STATUS_STARTED
> +        );
> +      eno = ENOTSUP;
> +    }
> +    break;
> +  }
> +
> +  if ( eno == 0 ) {
> +    self->phy.status = NETWORK_IF_PHY_STATUS_STARTED;
> +  }
> +
> +  return eno;
> +}
> +
> +/**
> + * @brief Allocate nocache RAM.
> + *
> + * Allocate uncached RAM.
> + * @param[in]  arg        The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @param[out] memory     Pointer of a buffer to write the address of the
> + *                        allocated memory to.
> + * @param[in]  size       Number of bytes to be allocated
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +int network_if_mem_alloc_nocache(
> +  void        *arg,
> +  void       **memory,
> +  const size_t size )
> +{
> +  int eno = EINVAL;
> +
> +  (void) arg;
> +
> +  assert( memory != NULL );
> +
> +  if ( memory != NULL ) {
> +    *memory = nocache_malloc( size );
> +
> +    if ( *memory != NULL ) {
> +      eno = 0;
> +    } else {
> +      eno = ENOMEM;
> +    }
> +  }
> +
> +  return eno;
> +}
> +
> +/**
> + * @brief Free nocache RAM.
> + *
> + * Release uncached RAM.
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @param[in] memory      Pointer to the memory to be freed.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +int network_if_mem_free_nocache(
> +  void *arg,
> +  void *memory )
> +{
> +  int eno = EINVAL;
> +
> +  (void) arg;
> +
> +  assert( memory != NULL );
> +
> +  if ( memory != NULL ) {
> +    nocache_free( memory );
> +    eno = 0;
> +  }
> +
> +  return eno;
> +}
> +
> +/**
> + * @brief Bus setup.
> + *
> + * Callback method for setting up the system bus for the network driver.
> + * @param[in] arg         The void pointer argument passed to
> + *                        dwmac_network_if_attach_detach.
> + * @retval 0 on success, error code from errno.h on failure.
> + */
> +int network_if_bus_setup( void *arg )
> +{
> +  (void) arg;
> +
> +  /* Nothing to be done */
> +  return 0;
> +}
> +
> +/*********************************************************************************
> +* Context Data
> +*********************************************************************************/
> +
> +/** @brief Network interface context */
> +static network_if_context context = NETWORK_IF_CONTEXT_INITIALIZER(
> +
> +  /** @brief Use EMAC1 */
> +  NETWORK_IF_NIC_ID_EMAC1,
> +
> +  /** @brief Address of driver context
> +   *
> +   * To be assigned with return value of dwmac_network_if_attach_detach */
> +  NULL
> +  );
> +
> +/** @brief Network driver DMA configuration data */
> +static const dwmac_dma_cfg NETWORK_DMA_CFG = DWMAC_DMA_CFG_INITIALIZER(
> +
> +  /** @brief Bus mode burst length */
> +  DWMAC_DMA_CFG_BUS_MODE_BURST_LENGTH_64,
> +
> +  /** @brief Bus mode fixed burst? */
> +  DWMAC_DMA_CFG_BUS_MODE_BURST_MODE_SINGLE_OR_INCR,
> +
> +  /** @brief Bus mode mixed burst? */
> +  DWMAC_DMA_CFG_BUS_MODE_BURST_NOT_MIXED,
> +
> +  /** @brief Permit AXI burst length of 4 */
> +  DWMAC_DMA_CFG_AXI_BURST_LENGTH_4_NOT_SUPPORTED,
> +
> +  /** @brief Permit AXI burst length of 8 */
> +  DWMAC_DMA_CFG_AXI_BURST_LENGTH_8_NOT_SUPPORTED,
> +
> +  /** @brief Permit AXI burst length of 16 */
> +  DWMAC_DMA_CFG_AXI_BURST_LENGTH_16_NOT_SUPPORTED,
> +
> +  /** @brief Select boundary crossing mode */
> +  DWMAC_DMA_CFG_AXI_BURST_BOUNDARY_4_KB
> +  );
> +
> +/** @brief Network driver configuration data */
> +static const dwmac_cfg NETWORK_DRIVER_CFG = DWMAC_CFG_INITIALIZER(
> +
> +  /** @brief GMII clock rate */
> +  75000000,
> +
> +  /** @brief Address of the GMAC registers for emac1 */
> +  ALT_EMAC1_GMACGRP_ADDR,
> +
> +  /** @brief Address of the DMA registers for emac1 */
> +  ALT_EMAC1_DMAGRP_ADDR,
> +
> +  /** @brief Address of the PHY on the mdio bus */
> +  4,
> +
> +  /** @brief Bytes per L1 cache line */
> +  32,
> +
> +  /** @brief Interrupt number for the EMAC */
> +  ALT_INT_INTERRUPT_EMAC1_IRQ,
> +
> +  /** @brief Set to true if prefetching into cache via PLD is supported */
> +  false,
> +
> +  /** @brief DMA configuration */
> +  &NETWORK_DMA_CFG,
> +
> +  /** @brief Callback method for enabling the network controller */
> +  network_if_nic_enable,
> +
> +  /** @brief Callback method for disabling the network controller */
> +  network_if_nic_disable,
> +
> +  /** @brief Callback method for enabling the PHY */
> +  network_if_phy_enable,
> +
> +  /** @brief Callback method for disabling the PHY */
> +  network_if_phy_disable,
> +
> +  /** @brief Callback which enables PHY events for forwarding to driver */
> +  network_if_phy_event_enable,
> +
> +  /** @brief Callback method for clearing PHY interrupt status */
> +  network_if_phy_event_status_clear,
> +
> +  /** @brief Callback method for getting a set of events from the PHY */
> +  network_if_phy_events_status_get,
> +
> +  /** @brief Callback method for making the PHY start forwarding events */
> +  network_if_phy_start,
> +
> +  /** @brief Callback method for making the PHY stop forwarding events */
> +  network_if_phy_stop,
> +
> +  /** @brief Callback method for allocating uncached memory */
> +  network_if_mem_alloc_nocache,
> +
> +  /** @brief Callback method for freeing uncached memory */
> +  network_if_mem_free_nocache,
> +
> +  /** @brief Callback method for setting up bus upon driver startup */
> +  network_if_bus_setup,
> +
> +  /** @brief Operations for the ethernet mac 1000 */
> +  &DWMAC_1000_ETHERNET_MAC_OPS,
> +
> +  /** @brief Operations for the enhanced DMA descriptors */
> +  &DWMAC_DESCRIPTOR_OPS_ENHANCED
> +  );
> +
> +/*********************************************************************************
> +* API
> +*********************************************************************************/
> +
> +/** @brief Network interface attach/detach
> + *
> + * The standard attach/detach method for network interfaces.
> + * This methods will call the DWMAC 1000 attach/detach method and pass
> + * configuration data and callback methods into it. Via these  the general
> + * DWMAC 1000 driver is able the handle micro controller specific things.
> + * NOTE: Detaching is NOT supported!
> + * @param config    Configuration parameters from and for the BSD network stack.
> + * @param attaching True if attaching the driver to the network stack, false if.
> + *                  detaching
> + * @retval 0 if successful, error code from errno.h if not.
> + */
> +int network_if_attach_detach(
> +  struct rtems_bsdnet_ifconfig *config,
> +  int                           attaching )
> +{
> +  int eno = 0;
> +
> +  assert( config != NULL );
> +
> +  /* Network controller initialization */
> +  context.driver_context = dwmac_network_if_attach_detach(
> +    config,
> +    &NETWORK_DRIVER_CFG,
> +    &context,
> +    attaching
> +    );
> +
> +  if ( context.driver_context == NULL ) {
> +    eno = EFAULT;
> +  }
> +
> +  return eno;
> +}
> +
> +#endif /* defined(RTEMS_NETWORKING) */
> \ No newline at end of file
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/preinstall.am b/c/src/lib/libbsp/arm/altera-cyclone-v/preinstall.am
> index d59525a..5d4fd83 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/preinstall.am
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/preinstall.am
> @@ -86,6 +86,10 @@ $(PROJECT_INCLUDE)/bsp/start.h: ../shared/include/start.h $(PROJECT_INCLUDE)/bsp
>         $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/start.h
>  PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/start.h
>
> +$(PROJECT_INCLUDE)/bsp/arm-a9mpcore-clock.h: ../shared/include/arm-a9mpcore-clock.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
> +       $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/arm-a9mpcore-clock.h
> +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/arm-a9mpcore-clock.h
> +
>  $(PROJECT_INCLUDE)/bsp/arm-a9mpcore-irq.h: ../shared/include/arm-a9mpcore-irq.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
>         $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/arm-a9mpcore-irq.h
>  PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/arm-a9mpcore-irq.h
> @@ -102,6 +106,10 @@ $(PROJECT_INCLUDE)/bsp/arm-cp15-start.h: ../shared/include/arm-cp15-start.h $(PR
>         $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/arm-cp15-start.h
>  PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/arm-cp15-start.h
>
> +$(PROJECT_INCLUDE)/bsp/arm-errata.h: ../shared/include/arm-errata.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
> +       $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/arm-errata.h
> +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/arm-errata.h
> +
>  $(PROJECT_INCLUDE)/bsp/arm-gic.h: ../shared/include/arm-gic.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
>         $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/arm-gic.h
>  PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/arm-gic.h
> @@ -118,10 +126,22 @@ $(PROJECT_INCLUDE)/bsp/arm-gic-tm27.h: ../shared/include/arm-gic-tm27.h $(PROJEC
>         $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/arm-gic-tm27.h
>  PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/arm-gic-tm27.h
>
> +$(PROJECT_INCLUDE)/bsp/arm-release-id.h: ../shared/include/arm-release-id.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
> +       $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/arm-release-id.h
> +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/arm-release-id.h
> +
>  $(PROJECT_INCLUDE)/bsp/irq.h: include/irq.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
>         $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq.h
>  PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq.h
>
> +$(PROJECT_INCLUDE)/bsp/network.h: include/network.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
> +       $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/network.h
> +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/network.h
> +
> +$(PROJECT_INCLUDE)/bsp/nocache-heap.h: include/nocache-heap.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
> +       $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/nocache-heap.h
> +PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/nocache-heap.h
> +
>  $(PROJECT_INCLUDE)/bsp/alt_16550_uart.h: hwlib/include/alt_16550_uart.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
>         $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/alt_16550_uart.h
>  PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/alt_16550_uart.h
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspreset.c b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspreset.c
> index 658f870..6a60db7 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspreset.c
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspreset.c
> @@ -13,14 +13,10 @@
>   */
>
>  #include <bsp/bootcard.h>
> +#include <bsp/alt_reset_manager.h>
>
>  void bsp_reset(void)
>  {
> -  volatile uint32_t *slcr_unlock = (volatile uint32_t *) 0xf8000008;
> -  volatile uint32_t *pss_rst_ctrl = (volatile uint32_t *) 0xf8000200;
> -
> -  while (true) {
> -    *slcr_unlock = 0xdf0d;
> -    *pss_rst_ctrl = 0x1;
> -  }
> +  /* Simply call the reset method from alteras HWLIB */
> +  (void) alt_reset_cold_reset();
>  }
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspstart.c b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspstart.c
> index 40459bb..58f38b9 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspstart.c
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspstart.c
> @@ -12,16 +12,120 @@
>   * http://www.rtems.com/license/LICENSE.
>   */
>
> +/*#define DEBUG_ECC_ERROR*/  /* TODO: Delete DEBUG_ECC_ERROR after implementation phase */
> +
> +#include <assert.h>
> +#include <stdint.h>
>  #include <bsp.h>
>  #include <bsp/bootcard.h>
>  #include <bsp/irq-generic.h>
> +#include <bsp/alt_interrupt_common.h>
> +#include <bsp/linker-symbols.h>
> +#include <bsp/start.h>
> +#include <rtems/config.h>
> +#include <socal/alt_rstmgr.h>
> +#include <socal/alt_sysmgr.h>
> +#include <socal/hps.h>
> +#ifdef DEBUG_ECC_ERROR
> +  #include <rtems/irq-extension.h>
> +  #include <socal/socal.h>
> +  #include <socal/alt_sdr.h>
> +#endif /* DEBUG_ECC_ERROR */
> +
> +#ifndef MIN
> +#define MIN( a, b ) ( ( a ) < ( b ) ? ( a ) : ( b ) )
> +#endif
>
> -void altcycv_fatal(altcycv_fatal_code code)
> +#ifdef DEBUG_ECC_ERROR
> +static void irq_handler_ddr_ecc_error( void *arg )
>  {
> -  rtems_fatal(RTEMS_FATAL_SOURCE_BSP_SPECIFIC, code);
> +  (void) arg;
> +  uint32_t cal_success                      =
> +    ALT_SDR_CTL_DRAMSTS_CALSUCCESS_GET(
> +      *( (uint32_t *) ALT_SDR_CTL_DRAMSTS_ADDR ) );
> +  uint32_t          cal_fail                = ALT_SDR_CTL_DRAMSTS_CALFAIL_GET(
> +    *( (uint32_t *) ALT_SDR_CTL_DRAMSTS_ADDR ) );
> +  uint32_t          single_bit_error        =
> +    ALT_SDR_CTL_DRAMSTS_SBEERR_GET( *( (uint32_t *) ALT_SDR_CTL_DRAMSTS_ADDR ) );
> +  uint32_t          double_bit_error        =
> +    ALT_SDR_CTL_DRAMSTS_DBEERR_GET( *( (uint32_t *) ALT_SDR_CTL_DRAMSTS_ADDR ) );
> +  uint32_t          auto_correction_dropped = ALT_SDR_CTL_DRAMSTS_CORRDROP_GET(
> +    *( (uint32_t *) ALT_SDR_CTL_DRAMSTS_ADDR ) );
> +  volatile uint32_t erraddr                 =
> +    ALT_SDR_CTL_ERRADDR_ADDR_GET(
> +      *(volatile uint32_t *) ALT_SDR_CTL_ERRADDR_ADDR );
> +
> +  /* Simply avoid a compiler warning */
> +  ++cal_success;
> +  ++cal_fail;
> +  ++single_bit_error;
> +  ++double_bit_error;
> +  ++auto_correction_dropped;
> +  ++erraddr;
> +
> +  alt_setbits_word( ALT_SDR_CTL_DRAMINTR_ADDR,
> +                    ALT_SDR_CTL_DRAMINTR_INTRCLR_SET_MSK );
>  }
>
> -void bsp_start(void)
> +static void setup_ecc_interrupt( void )
>  {
> -  bsp_interrupt_initialize();
> +  rtems_status_code sc = rtems_interrupt_handler_install(
> +    ALT_INT_INTERRUPT_DDR_ECC_ERROR_IRQ,
> +    NULL,
> +    RTEMS_INTERRUPT_UNIQUE,
> +    irq_handler_ddr_ecc_error,
> +    NULL
> +    );
> +
> +
> +  assert( sc == RTEMS_SUCCESSFUL );
>  }
> +
> +#else
> +  #define setup_ecc_interrupt()
> +#endif /* DEBUG_ECC_ERROR */
> +
> +static unsigned int bspstart_cores_started = 1;
> +
> +#ifdef RTEMS_SMP
> +static void bsp_start_secondary_cores( void )
> +{
> +  volatile uint32_t *mpumodrst       = ALT_RSTMGR_MPUMODRST_ADDR;
> +  uint32_t          *cpu1_start_addr = (
> +    ALT_SYSMGR_ROMCODE_ADDR + ALT_SYSMGR_ROMCODE_CPU1STARTADDR_OFST );
> +  const uint32_t     CORES           = MIN(
> +    (uintptr_t) bsp_processor_count,
> +    rtems_configuration_get_maximum_processors() );
> +  unsigned int       index;
> +
> +
> +  /* Memory would get overwritten if a too small processor count
> +   * would be specified */
> +  assert( (uintptr_t) bsp_processor_count >= BSP_ARM_MAX_CORES_PER_CONTROLLER );
> +
> +  if ( (uintptr_t) bsp_processor_count >= BSP_ARM_MAX_CORES_PER_CONTROLLER
> +       && bspstart_cores_started < CORES ) {
> +    for ( index = 1; index < CORES; ++index ) {
> +      /* set the start address from where the core will execute */
> +      (*cpu1_start_addr) = ALT_SYSMGR_ROMCODE_CPU1STARTADDR_VALUE_SET(
> +        (uintptr_t) _start );
> +
> +      /* Make the core finish it's reset */
> +      (*mpumodrst) &= ~ALT_RSTMGR_MPUMODRST_CPU1_SET_MSK;
> +      ++bspstart_cores_started;
> +    }
> +  }
> +}
> +
> +#else
> +
> +/* Nothing to be done */
> +  #define bsp_start_secondary_cores()
> +#endif /* #ifdef RTEMS_SMP */
> +
> +void bsp_start( void )
> +{
> +  bsp_interrupt_initialize();
> +  setup_ecc_interrupt();
> +  bsp_start_secondary_cores();
> +}
> \ No newline at end of file
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspstarthooks.c b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspstarthooks.c
> index 9831084..dd3821b 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspstarthooks.c
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/bspstarthooks.c
> @@ -17,6 +17,13 @@
>  #include <bsp/arm-cp15-start.h>
>  #include <bsp/arm-a9mpcore-start.h>
>  #include <bsp/linker-symbols.h>
> +#include <socal/alt_sdr.h>
> +#include <alt_address_space.h>
> +#include <socal/socal.h>
> +#include <socal/hps.h>
> +#include "../include/arm-cache-l1.h"
> +
> +/*#define DEBUG_ECC_ERROR*/ /* TODO: Delete DEBUG_ECC_ERROR after the implementation phase */
>
>  #ifdef RTEMS_SMP
>    #define MMU_DATA_READ_WRITE ARMV7_MMU_DATA_READ_WRITE_SHAREABLE
> @@ -24,84 +31,178 @@
>    #define MMU_DATA_READ_WRITE ARMV7_MMU_DATA_READ_WRITE_CACHED
>  #endif
>
> +/* 1 MB reset default value for address filtering start */
> +#define BSPSTART_L2_CACHE_ADDR_FILTERING_START_RESET 0x100000
> +
> +#ifndef BSPSTARTHOOKS_MIN
> +#define BSPSTARTHOOKS_MIN( a, b ) ( ( a ) < ( b ) ? ( a ) : ( b ) )
> +#endif
> +
> +LINKER_SYMBOL( bsp_section_nocache_size );
> +LINKER_SYMBOL( bsp_section_nocache_end );
> +LINKER_SYMBOL( bsp_section_nocache_begin );
> +
>  BSP_START_DATA_SECTION static const arm_cp15_start_section_config
> -altcycv_mmu_config_table[] = {
> +  altcycv_mmu_config_table[] = {
> +  ARMV7_CP15_START_DEFAULT_SECTIONS,
>    {
> -    .begin = (uint32_t) bsp_section_fast_text_begin,
> -    .end = (uint32_t) bsp_section_fast_text_end,
> -    .flags = ARMV7_MMU_CODE_CACHED
> -  }, {
> -    .begin = (uint32_t) bsp_section_fast_data_begin,
> -    .end = (uint32_t) bsp_section_fast_data_end,
> -    .flags = MMU_DATA_READ_WRITE
> -  }, {
> -    .begin = (uint32_t) bsp_section_start_begin,
> -    .end = (uint32_t) bsp_section_start_end,
> -    .flags = ARMV7_MMU_CODE_CACHED
> -  }, {
> -    .begin = (uint32_t) bsp_section_vector_begin,
> -    .end = (uint32_t) bsp_section_vector_end,
> -    .flags = MMU_DATA_READ_WRITE
> -  }, {
> -    .begin = (uint32_t) bsp_section_text_begin,
> -    .end = (uint32_t) bsp_section_text_end,
> -    .flags = ARMV7_MMU_CODE_CACHED
> -  }, {
> -    .begin = (uint32_t) bsp_section_rodata_begin,
> -    .end = (uint32_t) bsp_section_rodata_end,
> -    .flags = ARMV7_MMU_DATA_READ_ONLY_CACHED
> -  }, {
> -    .begin = (uint32_t) bsp_section_data_begin,
> -    .end = (uint32_t) bsp_section_data_end,
> -    .flags = MMU_DATA_READ_WRITE
> -  }, {
> -    .begin = (uint32_t) bsp_section_bss_begin,
> -    .end = (uint32_t) bsp_section_bss_end,
> -    .flags = MMU_DATA_READ_WRITE
> -  }, {
> -    .begin = (uint32_t) bsp_section_work_begin,
> -    .end = (uint32_t) bsp_section_work_end,
> -    .flags = MMU_DATA_READ_WRITE
> -  }, {
> -    .begin = (uint32_t) bsp_section_stack_begin,
> -    .end = (uint32_t) bsp_section_stack_end,
> -    .flags = MMU_DATA_READ_WRITE
> -  }, {
> -    .begin = 0xe0000000U,
> -    .end = 0xe0200000U,
> -    .flags = ARMV7_MMU_DEVICE
> -  }, {
> -    .begin = 0xf8000000U,
> -    .end = 0xf9000000U,
> +    .begin = (uint32_t) bsp_section_nocache_begin,
> +    .end   = (uint32_t) bsp_section_nocache_end,
> +
> +    .flags = ARMV7_MMU_DATA_READ_WRITE | ARM_MMU_SECT_TEX_0
> +  }, { /* Periphery area */
> +    .begin = 0xFC000000U,
> +    .end   = 0x00000000U,
>      .flags = ARMV7_MMU_DEVICE
>    }
>  };
>
> -BSP_START_TEXT_SECTION static void setup_mmu_and_cache(void)
> +BSP_START_TEXT_SECTION static void setup_mmu_and_cache( const uint32_t CPU_ID )
>  {
> -  uint32_t ctrl = arm_cp15_start_setup_mmu_and_cache(
> -    ARM_CP15_CTRL_A,
> -    ARM_CP15_CTRL_AFE | ARM_CP15_CTRL_Z
> -  );
> -
> -  arm_cp15_start_setup_translation_table_and_enable_mmu_and_cache(
> -    ctrl,
> -    (uint32_t *) bsp_translation_table_base,
> -    ARM_MMU_DEFAULT_CLIENT_DOMAIN,
> -    &altcycv_mmu_config_table[0],
> -    RTEMS_ARRAY_SIZE(altcycv_mmu_config_table)
> -  );
> +  uint32_t       ctrl  = arm_cp15_get_control();
> +  const uint32_t CORES = BSPSTARTHOOKS_MIN(
> +    (uintptr_t) bsp_processor_count,
> +    rtems_configuration_get_maximum_processors() );
> +
> +  /* We expect the L1 caches and program flow prediction to be off */
> +  assert( ( ctrl & ARM_CP15_CTRL_I ) == 0 );
> +  assert( ( ctrl & ARM_CP15_CTRL_C ) == 0 );
> +  assert( ( ctrl & ARM_CP15_CTRL_Z ) == 0 );
> +
> +  ctrl = arm_cp15_start_setup_mmu_and_cache(
> +    ARM_CP15_CTRL_A | ARM_CP15_CTRL_M,
> +    ARM_CP15_CTRL_AFE
> +    );
> +
> +  if( CPU_ID == 0 ) {
> +    arm_cp15_start_setup_translation_table(
> +      (uint32_t *) bsp_translation_table_base,
> +      ARM_MMU_DEFAULT_CLIENT_DOMAIN,
> +      &altcycv_mmu_config_table[0],
> +      RTEMS_ARRAY_SIZE( altcycv_mmu_config_table )
> +    );
> +  } else {
> +    /* FIXME: Sharing the translation table between processors is brittle */
> +    arm_cp15_set_translation_table_base((uint32_t *) bsp_translation_table_base);
> +  }
> +
> +  /* Enable MMU */
> +  ctrl |= ARM_CP15_CTRL_M;
> +
> +  arm_cp15_set_control( ctrl );
> +
> +  if( CPU_ID == (CORES - 1) ) {
> +    /* Enable all cache levels for the last core */
> +    rtems_cache_enable_instruction();
> +    rtems_cache_enable_data();
> +  } else {
> +    /* Enable only L1 cache */
> +    arm_cache_l1_enable_data();
> +    arm_cache_l1_enable_instruction();
> +  }
> +
> +  /* Enable flow control prediction aka. branch prediction */
> +
> +/* TODO: With the current network stack 06-Feb2014 in_checksum()
> + * becomes a severe performance bottle neck with branch prediction enabled
> +   ctrl |= ARM_CP15_CTRL_Z;
> +   arm_cp15_set_control(ctrl);*/
>  }
>
> -BSP_START_TEXT_SECTION void bsp_start_hook_0(void)
> +BSP_START_TEXT_SECTION void bsp_start_hook_0( void )
>  {
> -  arm_a9mpcore_start_hook_0();
> +  uint32_t ctrl;
> +  volatile a9mpcore_scu *scu    = (volatile a9mpcore_scu *) BSP_ARM_A9MPCORE_SCU_BASE;
> +  uint32_t               cpu_id = arm_cortex_a9_get_multiprocessor_cpu_id();
> +  const uint32_t         CORES  = BSPSTARTHOOKS_MIN(
> +    (uintptr_t) bsp_processor_count,
> +    rtems_configuration_get_maximum_processors() );
> +
> +  assert( cpu_id < CORES );
> +
> +  if( cpu_id < CORES ) {
> +
> +    (void)arm_cp15_mmu_disable( 32 );
> +
> +    ctrl = arm_cp15_get_control();
> +    ctrl &= ~( ARM_CP15_CTRL_I | ARM_CP15_CTRL_C | ARM_CP15_CTRL_Z );
> +    arm_cp15_set_control( ctrl );
> +
> +    if( cpu_id == 0 ) {
> +      /* Enable Snoop Control Unit (SCU) */
> +      arm_a9mpcore_start_scu_enable( scu );
> +    }
> +
> +#ifdef RTEMS_SMP
> +    /* Enable cache coherency support for this processor */
> +    uint32_t actlr = arm_cp15_get_auxiliary_control();
> +    actlr |= ARM_CORTEX_A9_ACTL_SMP;
> +    arm_cp15_set_auxiliary_control(actlr);
> +#endif
> +
> +    if (cpu_id == 0) {
> +      arm_a9mpcore_start_scu_invalidate(cpu_id, 0xF);
> +    }
> +
> +    setup_mmu_and_cache( cpu_id );
> +
> +#ifdef RTEMS_SMP
> +    if (cpu_id != 0) {
> +      arm_a9mpcore_start_set_vector_base();
> +
> +      arm_gic_irq_initialize_secondary_cpu();
> +
> +      arm_cp15_set_domain_access_control(
> +        ARM_CP15_DAC_DOMAIN(ARM_MMU_DEFAULT_CLIENT_DOMAIN, ARM_CP15_DAC_CLIENT)
> +      );
> +      _SMP_Start_multitasking_on_secondary_processor();
> +    }
> +#endif
> +  } else {
> +    /* FIXME: Shutdown processor */
> +    while (1) {
> +      __asm__ volatile ("wfi");
> +    }
> +  }
>  }
>
> -BSP_START_TEXT_SECTION void bsp_start_hook_1(void)
> +BSP_START_TEXT_SECTION void bsp_start_hook_1( void )
>  {
> +  uint32_t addr_filt_start;
> +  uint32_t addr_filt_end;
> +
> +
> +#ifndef DEBUG_ECC_ERROR
> +
> +  /* FIXME: Disable ECC. Preloader respectively UBoot enable ECC.
> +     But they do run without interrupts. Our BSP will enable interrupts
> +     and get spurious ECC error interrupts. Thus we disasable ECC
> +     until we either know about a better handling or Altera has modified
> +     it's SDRAM settings to not create possibly false ECC errors */
> +  uint32_t ctlcfg = alt_read_word( ALT_SDR_CTL_CTLCFG_ADDR );
> +  ctlcfg &= ALT_SDR_CTL_CTLCFG_ECCEN_CLR_MSK;
> +  alt_write_word( ALT_SDR_CTL_CTLCFG_ADDR, ctlcfg );
> +#endif
> +
> +  /* Perform L3 remap register programming first by setting the desired new MPU
> +     address space 0 mapping. Assume BOOTROM in order to be able to boot the second core. */
> +  alt_addr_space_remap(
> +    ALT_ADDR_SPACE_MPU_ZERO_AT_BOOTROM,
> +    ALT_ADDR_SPACE_NONMPU_ZERO_AT_SDRAM,
> +    ALT_ADDR_SPACE_H2F_ACCESSIBLE,
> +    ALT_ADDR_SPACE_LWH2F_ACCESSIBLE );
> +
> +  /* Next, adjust the L2 cache address filtering range. Set the start address to
> +     the default reset value and retain the existing end address configuration. */
> +  alt_l2_addr_filter_cfg_get( &addr_filt_start, &addr_filt_end );
> +
> +  if ( addr_filt_start != BSPSTART_L2_CACHE_ADDR_FILTERING_START_RESET ) {
> +    alt_l2_addr_filter_cfg_set( BSPSTART_L2_CACHE_ADDR_FILTERING_START_RESET,
> +                                addr_filt_end );
> +  }
> +
>    arm_a9mpcore_start_hook_1();
>    bsp_start_copy_sections();
> -  setup_mmu_and_cache();
> +
>    bsp_start_clear_bss();
> -}
> +}
> \ No newline at end of file
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/startup/linkcmds.altcycv_devkit b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/linkcmds.altcycv_devkit
> index 2bb0f82..60f99a0 100644
> --- a/c/src/lib/libbsp/arm/altera-cyclone-v/startup/linkcmds.altcycv_devkit
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/linkcmds.altcycv_devkit
> @@ -1,6 +1,18 @@
>  MEMORY {
> -   RAM_MMU   : ORIGIN = 0x00100000, LENGTH = 16k
> -   RAM       : ORIGIN = 0x00104000, LENGTH = 512M - 1M - 16k
> +   RAM_MMU : ORIGIN = 0x00100000, LENGTH = 16k
> +   NOCACHE : ORIGIN = 0x00200000, LENGTH = 1M
> +   RAM     : ORIGIN = 0x00300000, LENGTH = 1024M - 1M - 1M - 1M
> +}
> +
> +SECTIONS {
> +  .nocache : {
> +    bsp_section_nocache_begin = .;
> +    *(SORT(.bsp_nocache*))
> +    bsp_section_nocache_end = .;
> +  } > NOCACHE AT > NOCACHE
> +  bsp_section_nocache_size = bsp_section_nocache_end - bsp_section_nocache_begin;
> +  bsp_section_nocache_load_begin = LOADADDR (.nocache);
> +  bsp_section_nocache_load_end = bsp_section_nocache_load_begin + bsp_section_nocache_size;
>  }
>
>  INCLUDE linkcmds.altcycv
> diff --git a/c/src/lib/libbsp/arm/altera-cyclone-v/startup/nocache-heap.c b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/nocache-heap.c
> new file mode 100644
> index 0000000..0c5e526
> --- /dev/null
> +++ b/c/src/lib/libbsp/arm/altera-cyclone-v/startup/nocache-heap.c
> @@ -0,0 +1,87 @@
> +/**
> + * @file nocache-heap.c
> + *
> + * @ingroup [GROUP NAME]
> + *
> + * @brief Heap handling for uncached RAM
> + */
> +
> +/*
> + * Copyright (c) 2013 embedded brains GmbH.  All rights reserved.
> + *
> + *  embedded brains GmbH
> + *  Dornierstr. 4
> + *  82178 Puchheim
> + *  Germany
> + *  <rtems at embedded-brains.de>
> + *
> + * The license and distribution terms for this file may be
> + * found in the file LICENSE in this distribution or at
> + * http://www.rtems.org/license/LICENSE.
> + */
> +
> +#include <assert.h>
> +#include <errno.h>
> +#include <bsp/linker-symbols.h>
> +#include "../include/nocache-heap.h" /* TODO: Convert to #include <bsp/nocache-heap.h> */
> +#include <rtems/score/heapimpl.h>
> +
> +/** @brief Uncached RAM pool
> + *
> + * Allocate the whole bsp_nocache for the nocache heap */
> +static char nocache_pool[1024
> +                         * 1024] __attribute__( ( section( ".bsp_nocache" ) ) );
> +
> +/** @brief Nocache heap
> + *
> + * Heap control for the uncached RAM heap */
> +static Heap_Control nocache_heap;
> +
> +/** @brief Init nocache heap
> + *
> + * Constructor for the uncached RAM heap
> + * @retval 0 on succuss, error code from errno.h on failure
> + */
> +__attribute__( ( constructor ) ) int nocache_init_heap( void )
> +{
> +  int       eno         = 0;
> +  uintptr_t heap_status = 0;
> +
> +
> +  heap_status = _Heap_Initialize(
> +    &nocache_heap,
> +    &nocache_pool[0],
> +    sizeof( nocache_pool ),
> +    0
> +    );
> +
> +  if ( heap_status == 0 ) {
> +    eno = ENOMEM;
> +  }
> +
> +  return eno;
> +}
> +
> +/** @brief Allocate uncached RAM
> + *
> + * Allocates RAM from the uncached heap
> + * @param size  Number of bytes to be allocated
> + * @retval  Pointer to the allocated RAM
> + */
> +void *nocache_malloc( const size_t size )
> +{
> +  return _Heap_Allocate( &nocache_heap, size );
> +}
> +
> +/** @brief Free uncached RAM
> + *
> + * Releases RAM from the uncached heap
> + * @param ptr Address of the RAM to be released
> + */
> +void nocache_free( void *ptr )
> +{
> +  if ( ptr != NULL ) {
> +    bool ok = _Heap_Free( &nocache_heap, ptr );
> +    assert( ok );
> +  }
> +}
> \ No newline at end of file
> --
> 1.7.10.4
>
> _______________________________________________
> rtems-devel mailing list
> rtems-devel at rtems.org
> http://www.rtems.org/mailman/listinfo/rtems-devel




More information about the devel mailing list