[PATCH 03/42] m68k/mvme167: Fix warnings
Joel Sherrill
joel.sherrill at oarcorp.com
Fri Oct 17 15:23:19 UTC 2014
---
c/src/lib/libbsp/m68k/mvme167/console/console.c | 34 ++++++++++++++++++-------
c/src/lib/libbsp/m68k/mvme167/timer/timer.c | 2 +-
2 files changed, 26 insertions(+), 10 deletions(-)
diff --git a/c/src/lib/libbsp/m68k/mvme167/console/console.c b/c/src/lib/libbsp/m68k/mvme167/console/console.c
index 7ec174e..8f77361 100644
--- a/c/src/lib/libbsp/m68k/mvme167/console/console.c
+++ b/c/src/lib/libbsp/m68k/mvme167/console/console.c
@@ -1,6 +1,4 @@
/*
- * console.c
- *
* This file contains the MVME167 termios console package. Only asynchronous
* I/O is supported.
*
@@ -117,7 +115,9 @@
* All page references are to the MVME166/MVME167/MVME187 Single Board
* Computer Programmer's Reference Guide (MVME187PG/D2) with the April
* 1993 supplements/addenda (MVME187PG/D2A1).
- *
+ */
+
+/*
* Copyright (c) 1998, National Research Council of Canada
*
* The license and distribution terms for this file may be
@@ -535,8 +535,13 @@ rtems_isr cd2401_rx_isr(
)
{
char c;
- uint8_t ch, status, nchars, i, total;
- char buffer[256];
+ uint8_t ch, status, nchars, total;
+ #ifdef CD2401_RECORD_DEBUG_INFO
+ uint8_t i = 0;
+ char buffer[256];
+ #endif
+
+ (void) total; /* avoid set but not used warnings when not recording info */
status = cd2401->u5.b.risrl;
ch = cd2401->licr >> 2;
@@ -545,11 +550,12 @@ rtems_isr cd2401_rx_isr(
if ( CD2401_Channel_Info[ch].tty && !status ) {
/* Normal Rx Int, read chars, enqueue them, and issue EOI */
total = nchars = cd2401->rfoc; /* Nb of chars to retrieve from rx FIFO */
- i = 0;
while ( nchars-- > 0 ) {
c = (char)cd2401->dr; /* Next char in rx FIFO */
rtems_termios_enqueue_raw_characters( CD2401_Channel_Info[ch].tty ,&c, 1 );
- buffer[i++] = c;
+ #ifdef CD2401_RECORD_DEBUG_INFO
+ buffer[i++] = c;
+ #endif
}
cd2401->reoir = 0; /* EOI */
CD2401_RECORD_RX_ISR_INFO(( ch, total, buffer ));
@@ -587,6 +593,15 @@ rtems_isr cd2401_tx_isr(
ch = cd2401->licr >> 2;
initial_ier = cd2401->ier;
+ #ifndef CD2401_RECORD_DEBUG_INFO
+ /*
+ * When the debug is disabled, these variables are really not read.
+ * But when debug is enabled, they are.
+ */
+ (void) initial_ier; /* avoid set but not used warning */
+ (void) final_ier; /* avoid set but not used warning */
+ #endif
+
/* Has this channel been initialized? */
if ( !CD2401_Channel_Info[ch].tty ) {
/* No, record as spurious interrupt */
@@ -594,6 +609,7 @@ rtems_isr cd2401_tx_isr(
(vector << 24) | (cd2401->stk << 16) | (cd2401->tir << 8) | cd2401->tisr;
CD2401_Channel_Info[ch].spur_cnt++;
final_ier = cd2401->ier &= 0xFC;/* Shut up, whoever you are */
+
cd2401->teoir = 0x88; /* EOI - Terminate buffer and no transfer */
CD2401_RECORD_TX_ISR_SPURIOUS_INFO(( ch, status, initial_ier, final_ier,
CD2401_Channel_Info[ch].spur_dev,
@@ -1332,7 +1348,7 @@ ssize_t _167Bug_pollWrite(
*
* CANNOT BE COMBINED WITH INTERRUPT DRIVEN I/O!
*/
-rtems_status_code do_poll_read(
+static rtems_status_code do_poll_read(
rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg
@@ -1370,7 +1386,7 @@ rtems_status_code do_poll_read(
*
* CANNOT BE COMBINED WITH INTERRUPT DRIVEN I/O!
*/
-rtems_status_code do_poll_write(
+static rtems_status_code do_poll_write(
rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg
diff --git a/c/src/lib/libbsp/m68k/mvme167/timer/timer.c b/c/src/lib/libbsp/m68k/mvme167/timer/timer.c
index 3b5dad4..ed2ce26 100644
--- a/c/src/lib/libbsp/m68k/mvme167/timer/timer.c
+++ b/c/src/lib/libbsp/m68k/mvme167/timer/timer.c
@@ -51,7 +51,7 @@ uint32_t Ttimer_val;
*/
bool benchmark_timer_find_average_overhead;
-rtems_isr_entry timerisr(rtems_vector_number);
+rtems_isr timerisr(rtems_vector_number);
/*
* This routine initializes the Tick Timer 1 on the MVME167 board.
--
1.9.3
More information about the devel
mailing list