[PATCH] powerpc/score603e: Remove (obselete).

Ralph Holmes ralph at ybden.com
Tue Dec 8 23:10:24 UTC 2015


Updates #2458.
---
 c/src/lib/libbsp/powerpc/acinclude.m4              |   2 -
 c/src/lib/libbsp/powerpc/score603e/Makefile.am     |  77 ----
 c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.c   | 102 -----
 c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.h   |  42 --
 c/src/lib/libbsp/powerpc/score603e/PCI_bus/flash.c | 108 -----
 .../libbsp/powerpc/score603e/PCI_bus/universe.c    | 255 -----------
 c/src/lib/libbsp/powerpc/score603e/README          |  53 ---
 c/src/lib/libbsp/powerpc/score603e/bsp_specs       |  13 -
 c/src/lib/libbsp/powerpc/score603e/configure.ac    |  84 ----
 c/src/lib/libbsp/powerpc/score603e/console/85c30.c | 422 ------------------
 c/src/lib/libbsp/powerpc/score603e/console/85c30.h |  52 ---
 .../lib/libbsp/powerpc/score603e/console/console.c | 413 -----------------
 .../libbsp/powerpc/score603e/console/consolebsp.h  | 146 ------
 .../libbsp/powerpc/score603e/console/tbl85c30.c    | 194 --------
 c/src/lib/libbsp/powerpc/score603e/include/bsp.h   | 199 ---------
 c/src/lib/libbsp/powerpc/score603e/include/gen2.h  | 209 ---------
 c/src/lib/libbsp/powerpc/score603e/include/tm27.h  |  68 ---
 c/src/lib/libbsp/powerpc/score603e/irq/FPGA.c      | 180 --------
 c/src/lib/libbsp/powerpc/score603e/irq/irq.c       | 495 ---------------------
 c/src/lib/libbsp/powerpc/score603e/irq/irq.h       | 153 -------
 c/src/lib/libbsp/powerpc/score603e/irq/irq_init.c  | 131 ------
 c/src/lib/libbsp/powerpc/score603e/irq/no_pic.c    |  82 ----
 .../powerpc/score603e/make/custom/score603e.cfg    |  29 --
 c/src/lib/libbsp/powerpc/score603e/preinstall.am   | 103 -----
 c/src/lib/libbsp/powerpc/score603e/start/start.S   | 126 ------
 .../libbsp/powerpc/score603e/startup/Hwr_init.c    | 142 ------
 .../libbsp/powerpc/score603e/startup/bspstart.c    | 232 ----------
 .../lib/libbsp/powerpc/score603e/startup/genpvec.c | 166 -------
 .../lib/libbsp/powerpc/score603e/startup/linkcmds  | 248 -----------
 .../lib/libbsp/powerpc/score603e/startup/vmeintr.c |  48 --
 c/src/lib/libbsp/powerpc/score603e/timer/timer.c   |  77 ----
 c/src/lib/libbsp/powerpc/score603e/tod/tod.c       | 172 -------
 c/src/lib/libbsp/powerpc/score603e/vme/VMEConfig.h |  97 ----
 33 files changed, 4920 deletions(-)
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/Makefile.am
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.h
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/PCI_bus/flash.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/PCI_bus/universe.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/README
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/bsp_specs
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/configure.ac
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/console/85c30.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/console/85c30.h
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/console/console.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/console/consolebsp.h
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/console/tbl85c30.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/include/bsp.h
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/include/gen2.h
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/include/tm27.h
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/irq/FPGA.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/irq/irq.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/irq/irq.h
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/irq/irq_init.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/irq/no_pic.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/make/custom/score603e.cfg
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/preinstall.am
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/start/start.S
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/startup/Hwr_init.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/startup/bspstart.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/startup/genpvec.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/startup/linkcmds
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/startup/vmeintr.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/timer/timer.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/tod/tod.c
 delete mode 100644 c/src/lib/libbsp/powerpc/score603e/vme/VMEConfig.h

diff --git a/c/src/lib/libbsp/powerpc/acinclude.m4 b/c/src/lib/libbsp/powerpc/acinclude.m4
index 6442399..4dfb84d 100644
--- a/c/src/lib/libbsp/powerpc/acinclude.m4
+++ b/c/src/lib/libbsp/powerpc/acinclude.m4
@@ -30,8 +30,6 @@ AC_DEFUN([RTEMS_CHECK_BSPDIR],
     AC_CONFIG_SUBDIRS([qemuppc]);;
   qoriq )
     AC_CONFIG_SUBDIRS([qoriq]);;
-  score603e )
-    AC_CONFIG_SUBDIRS([score603e]);;
   ss555 )
     AC_CONFIG_SUBDIRS([ss555]);;
   t32mppc )
diff --git a/c/src/lib/libbsp/powerpc/score603e/Makefile.am b/c/src/lib/libbsp/powerpc/score603e/Makefile.am
deleted file mode 100644
index 2e9eebb..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/Makefile.am
+++ /dev/null
@@ -1,77 +0,0 @@
-ACLOCAL_AMFLAGS = -I ../../../../aclocal
-
-include $(top_srcdir)/../../../../automake/compile.am
-include $(top_srcdir)/../../bsp.am
-
-include_bspdir = $(includedir)/bsp
-
-dist_project_lib_DATA = bsp_specs
-
-include_HEADERS = include/bsp.h
-include_HEADERS += include/tm27.h
-
-nodist_include_HEADERS = include/bspopts.h
-nodist_include_bsp_HEADERS = ../../shared/include/bootcard.h
-DISTCLEANFILES = include/bspopts.h
-
-include_HEADERS += ../../shared/include/coverhd.h include/gen2.h
-
-###
-dist_project_lib_DATA += startup/linkcmds
-
-startup_SOURCES = ../../shared/bspclean.c ../../shared/bsplibc.c \
-    startup/bspstart.c ../../powerpc/shared/startup/bspgetworkarea.c \
-    ../../shared/bsppost.c  \
-    ../../shared/bootcard.c ../../shared/bsppretaskinghook.c \
-    startup/Hwr_init.c \
-    ../../powerpc/shared/startup/sbrk.c ../../shared/gnatinstallhandler.c \
-    ../../powerpc/shared/showbats.c
-
-pclock_SOURCES = ../../powerpc/shared/clock/p_clock.c
-console_SOURCES = console/85c30.c console/85c30.h console/console.c \
-    console/tbl85c30.c console/consolebsp.h
-
-include_bsp_HEADERS = ../../powerpc/shared/pci/pci.h \
-	PCI_bus/PCI.h \
-	../../powerpc/shared/residual/residual.h \
-	../../powerpc/shared/residual/pnp.h \
-	../../powerpc/shared/console/consoleIo.h
-
-pci_SOURCES = PCI_bus/flash.c ../../powerpc/shared/pci/pci.c \
-    ../../powerpc/shared/pci/pcifinddevice.c  PCI_bus/PCI.c  PCI_bus/universe.c
-
-include_bsp_HEADERS += irq/irq.h \
-	../../../libcpu/@RTEMS_CPU@/@exceptions@/bspsupport/irq_supp.h
-
-irq_SOURCES =  irq/no_pic.c irq/irq_init.c \
-    irq/FPGA.c
-
-vectors_SOURCES =
-
-EXTRA_DIST = start/start.S
-start.$(OBJEXT): start/start.S
-	$(CPPASCOMPILE) -o $@ -c $<
-project_lib_DATA = start.$(OBJEXT)
-
-EXTRA_DIST += ../../powerpc/shared/start/rtems_crti.S
-rtems_crti.$(OBJEXT): ../../powerpc/shared/start/rtems_crti.S
-	$(CPPASCOMPILE) -o $@ -c $<
-project_lib_DATA += rtems_crti.$(OBJEXT)
-
-noinst_LIBRARIES = libbsp.a
-libbsp_a_SOURCES = $(pclock_SOURCES) $(console_SOURCES) $(irq_SOURCES) \
-    $(pci_SOURCES) $(vectors_SOURCES) $(startup_SOURCES)
-
-libbsp_a_LIBADD = \
-    ../../../libcpu/@RTEMS_CPU@/shared/cache.rel \
-    ../../../libcpu/@RTEMS_CPU@/shared/cpuIdent.rel \
-    ../../../libcpu/@RTEMS_CPU@/shared/stack.rel \
-    ../../../libcpu/@RTEMS_CPU@/@exceptions@/rtems-cpu.rel \
-    ../../../libcpu/@RTEMS_CPU@/mpc6xx/clock.rel \
-    ../../../libcpu/@RTEMS_CPU@/@exceptions@/exc_bspsupport.rel \
-    ../../../libcpu/@RTEMS_CPU@/@exceptions@/irq_bspsupport.rel \
-     ../../../libcpu/@RTEMS_CPU@/mpc6xx/mmu.rel \
-    ../../../libcpu/@RTEMS_CPU@/mpc6xx/timer.rel
-
-include $(srcdir)/preinstall.am
-include $(top_srcdir)/../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.c b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.c
deleted file mode 100644
index 999ab93..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *  COPYRIGHT (c) 1989-2014.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <rtems.h>
-#include <assert.h>
-#include <stdio.h>
-
-#include <bsp.h>
-
-/*
- * Forced delay to get around timing problems with the UNIVERSE chip.  The
- * two nops are used so that the delay works for varying clock frequencies,
- * up to 66 Mhz, with margin.  Each nop averages about 1 1/2 clock ticks,
- * and since there are 2 nops, this routine takes about 3 clock ticks,
- * which on a worst case 66 Mhz board, is 45 nanosecond. This time period
- * is sufficient to guarantee a work-around to the UNIVERSE chip timing
- * problem.  The problem is that when there are two successive accesses to
- * an UNIVERSE register, without sufficient delay, the second access will
- * not work correctly.
- */
-static void PCI_bus_delay (void)
-{
-  __asm__ volatile ("nop");
-  __asm__ volatile ("nop");
-}
-
-/*
- * PCI_bus_write
- */
-void PCI_bus_write(
-  volatile uint32_t         * _addr,                  /* IN */
-  uint32_t         _data                              /* IN */
-)
-{
-  _data = Convert_Endian_32( _data );
-  *_addr = _data;
-}
-
-uint32_t PCI_bus_read(
-  volatile uint32_t         *  _addr                  /* IN */
-)
-{
-  uint32_t         data;
-
-  data = *_addr;
-  data = Convert_Endian_32( data );
-  return data;
-}
-/*
- * PCI Configuration Cycle Read/Write Access which is used to access all of
- * devices registers on the PCI bus.  i.e.: Universe, Ethernet & PMC.
- */
-uint32_t Read_pci_device_register(
-  uint32_t         address
-)
-{
-  uint32_t         data;
-
-  /*
-   * Write the PCI configuration address
-   */
-   PCI_bus_write( (volatile uint32_t*)SCORE603E_PCI_IO_CFG_ADDR, address );
-
-  /*
-   *  Delay needed when running out of DRAM
-   */
-   PCI_bus_delay ();
-
-  /*
-   * read data
-   */
-  data = PCI_bus_read( (volatile uint32_t*)SCORE603E_PCI_IO_CFG_DATA );
-
-  return data;
-}
-
-void  Write_pci_device_register(
-  uint32_t         address,
-  uint32_t         data
-)
-{
-  /*
-   * Write the PCI configuration address
-   */
-   PCI_bus_write( (volatile uint32_t*)SCORE603E_PCI_IO_CFG_ADDR, address );
-
-  /*
-   *  Delay needed when running out of DRAM
-   */
-   PCI_bus_delay ();
-
-  /*
-   * write data
-   */
-  PCI_bus_write( (volatile uint32_t*)SCORE603E_PCI_IO_CFG_DATA, data );
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.h b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.h
deleted file mode 100644
index 7b1526f..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/PCI.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/**
- *  @file
- *
- *  This include file contains prototypes for chips attached to the
- *  PCI bus.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef __PCI_h
-#define __PCI_h
-
-/*
- * PCI.c
- */
-
-void PCI_bus_write(
-  volatile uint32_t         * _addr,
-  uint32_t         _data
-);
-
-uint32_t         PCI_bus_read(
-  volatile uint32_t         *  _addr
-);
-
-uint32_t         Read_pci_device_register(
-  uint32_t         address
-);
-
-void  Write_pci_device_register(
-  uint32_t         address,
-  uint32_t         data
-);
-
-#endif
diff --git a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/flash.c b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/flash.c
deleted file mode 100644
index a2e084a..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/flash.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <rtems.h>
-#include <assert.h>
-#include <stdio.h>
-#include <inttypes.h>
-
-#include <bsp.h>
-#include <bsp/irq.h>
-#include "PCI.h"
-
-/*
- *  SCORE603e_FLASH_Disable
- */
-unsigned int SCORE603e_FLASH_Disable(
-  uint32_t        area
-)
-{
-  uint8_t         value;
-
-  value = *SCORE603E_BOARD_CTRL_REG;
-  value = value | (~SCORE603E_BRD_FLASH_DISABLE_MASK);
-  *SCORE603E_BOARD_CTRL_REG = value;
-
-  return RTEMS_SUCCESSFUL;
-}
-
-unsigned int SCORE603e_FLASH_verify_enable( void )
-{
-  volatile uint8_t         *Ctrl_Status_Register =
-           (void *)SCORE603E_BOARD_CTRL_REG;
-  uint8_t          ctrl_value;
-  uint32_t         pci_value;
-
-  ctrl_value = *Ctrl_Status_Register;
-  if ( ctrl_value & SCORE603E_BRD_FLASH_DISABLE_MASK ) {
-    printf ("Flash Writes Disabled by board control register %x\n",
-            ctrl_value );
-    assert( 0x0 );
-  }
-
-  pci_value = Read_pci_device_register( 0x800000A8 );
-  if (( pci_value & 0x00001000 ) == 0) {
-    printf("Error PCI A8 \n");
-    assert( 0x0 );
-  }
-
-  pci_value = Read_pci_device_register( 0x800000AC );
-  if ( pci_value & 0x02000000) {
-    printf("Error PCI AC \n");
-    assert( 0x0 );
-  }
-  return RTEMS_SUCCESSFUL;
-}
-
-#if 0
-unsigned int SCORE603e_FLASH_pci_reset_reg(
-  uint8_t          reg,
-  uint32_t         cmask,
-  uint32_t         mask
-)
-{
-  uint32_t         pci_value;
-  uint32_t         value;
-
-  pci_value = Read_pci_device_register( reg );
-  pci_value &= cmask;
-  pci_value |= mask;
-  Write_pci_device_register( reg, pci_value );
-  value = Read_pci_device_register(  reg );
-  if (value != pci_value) {
-    printf("Error PCI 0x%2"PRIX8" wrote 0x%8"PRIX32" read %8"PRIX32"\n", reg, pci_value, value);
-  }
-  return RTEMS_SUCCESSFUL;
-}
-#endif
-
-/*
- *  SCORE603e_FLASH_Enable_writes
- */
-unsigned int SCORE603e_FLASH_Enable_writes(
-  uint32_t         area
-)
-{
-  uint8_t          ctrl_value;
-  uint32_t         pci_value;
-
-  ctrl_value = *SCORE603E_BOARD_CTRL_REG;
-  ctrl_value = ctrl_value & 0xbf;
-  *SCORE603E_BOARD_CTRL_REG = ctrl_value;
-
-  pci_value = Read_pci_device_register( 0x800000A8 );
-  pci_value |= 0x00001000;
-  Write_pci_device_register( 0x800000A8, pci_value );
-
-  pci_value = Read_pci_device_register( 0x800000AC );
-  pci_value &=  (~0x02000000);
-  Write_pci_device_register( 0x000000AC, pci_value );
-
-  return RTEMS_SUCCESSFUL;
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/universe.c b/c/src/lib/libbsp/powerpc/score603e/PCI_bus/universe.c
deleted file mode 100644
index c373aa6..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/PCI_bus/universe.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <rtems.h>
-#include <assert.h>
-#include <stdio.h>
-#include <inttypes.h>
-#include <rtems/bspIo.h>
-
-#include <bsp.h>
-#include "PCI.h"
-
-typedef struct {
-  uint32_t         PCI_ID;                 /* 0x80030000 */
-  uint32_t         PCI_CSR;                /* 0x80030004 */
-  uint32_t         PCI_CLASS;              /* 0x80030008 */
-  uint32_t         PCI_MISC0;              /* 0x8003000C */
-  uint32_t         PCI_BS;                 /* 0x80030010 */
-  uint32_t         Buf_0x80030014[ 0x0A ]; /* 0x80030014 */
-  uint32_t         PCI_MISC1;              /* 0x8003003C */
-  uint32_t         Buf_0x80030040[ 0x30 ]; /* 0x80030040 */
-  uint32_t         LSI0_CTL;               /* 0x80030100 */
-  uint32_t         LSI0_BS;                /* 0x80030104 */
-  uint32_t         LSI0_BD;                /* 0x80030108 */
-  uint32_t         LSI0_TO;                /* 0x8003010C */
-  uint32_t         Buf_0x80030110;         /* 0x80030110 */
-  uint32_t         LSI1_CTL;               /* 0x80030114 */
-  uint32_t         LSI1_BS;                /* 0x80030118 */
-  uint32_t         LSI1_BD;                /* 0x8003011C */
-  uint32_t         LSI1_TO;                /* 0x80030120 */
-  uint32_t         Buf_0x80030124;         /* 0x80030124 */
-  uint32_t         LSI2_CTL;               /* 0x80030128 */
-  uint32_t         LSI2_BS;                /* 0x8003012C */
-  uint32_t         LSI2_BD;                /* 0x80030130 */
-  uint32_t         LSI2_TO;                /* 0x80030134 */
-  uint32_t         Buf_0x80030138;         /* 0x80030138 */
-  uint32_t         LSI3_CTL;               /* 0x8003013C */
-  uint32_t         LSI3_BS;                /* 0x80030140 */
-  uint32_t         LSI3_BD;                /* 0x80030144 */
-  uint32_t         LSI3_TO;                /* 0x80030148 */
-  uint32_t         Buf_0x8003014C[ 0x09 ]; /* 0x8003014C */
-  uint32_t         SCYC_CTL;               /* 0x80030170 */
-  uint32_t         SCYC_ADDR;              /* 0x80030174 */
-  uint32_t         SCYC_EN;                /* 0x80030178 */
-  uint32_t         SCYC_CMP;               /* 0x8003017C */
-  uint32_t         SCYC_SWP;               /* 0x80030180 */
-  uint32_t         LMISC;                  /* 0x80030184 */
-  uint32_t         SLSI;                   /* 0x80030188 */
-  uint32_t         L_CMDERR;               /* 0x8003018C */
-  uint32_t         LAERR;                  /* 0x80030190 */
-  uint32_t         Buf_0x80030194[ 0x1B ]; /* 0x80030194 */
-  uint32_t         DCTL;                   /* 0x80030200 */
-  uint32_t         DTBC;                   /* 0x80030204 */
-  uint32_t         DLA;                    /* 0x80030208 */
-  uint32_t         Buf_0x8003020C;         /* 0x8003020C */
-  uint32_t         DVA;                    /* 0x80030210 */
-  uint32_t         Buf_0x80030214;         /* 0x80030214 */
-  uint32_t         DCPP;                   /* 0x80030218 */
-  uint32_t         Buf_0x8003021C;         /* 0x8003021C */
-  uint32_t         DGCS;                   /* 0x80030220 */
-  uint32_t         D_LLUE;                 /* 0x80030224 */
-  uint32_t         Buf_0x80030228[ 0x36 ]; /* 0x80030228 */
-  uint32_t         LINT_EN;                /* 0x80030300 */
-  uint32_t         LINT_STAT;              /* 0x80030304 */
-  uint32_t         LINT_MAP0;              /* 0x80030308 */
-  uint32_t         LINT_MAP1;              /* 0x8003030C */
-  uint32_t         VINT_EN;                /* 0x80030310 */
-  uint32_t         VINT_STAT;              /* 0x80030314 */
-  uint32_t         VINT_MAP0;              /* 0x80030318 */
-  uint32_t         VINT_MAP1;              /* 0x8003031C */
-  uint32_t         STATID;                 /* 0x80030320 */
-  uint32_t         V1_STATID;              /* 0x80030324 */
-  uint32_t         V2_STATID;              /* 0x80030328 */
-  uint32_t         V3_STATID;              /* 0x8003032C */
-  uint32_t         V4_STATID;              /* 0x80030330 */
-  uint32_t         V5_STATID;              /* 0x80030334 */
-  uint32_t         V6_STATID;              /* 0x80030338 */
-  uint32_t         V7_STATID;              /* 0x8003033C */
-  uint32_t         Buf_0x80030340[ 0x30 ]; /* 0x80030340 */
-  uint32_t         MAST_CTL;               /* 0x80030400 */
-  uint32_t         MISC_CTL;               /* 0x80030404 */
-  uint32_t         MISC_STAT;              /* 0x80030408 */
-  uint32_t         USER_AM;                /* 0x8003040C */
-  uint32_t         Buf_0x80030410[ 0x2bc ];/* 0x80030410 */
-  uint32_t         VSI0_CTL;               /* 0x80030F00 */
-  uint32_t         VSI0_BS;                /* 0x80030F04 */
-  uint32_t         VSI0_BD;                /* 0x80030F08 */
-  uint32_t         VSI0_TO;                /* 0x80030F0C */
-  uint32_t         Buf_0x80030f10;         /* 0x80030F10 */
-  uint32_t         VSI1_CTL;               /* 0x80030F14 */
-  uint32_t         VSI1_BS;                /* 0x80030F18 */
-  uint32_t         VSI1_BD;                /* 0x80030F1C */
-  uint32_t         VSI1_TO;                /* 0x80030F20 */
-  uint32_t         Buf_0x80030F24;         /* 0x80030F24 */
-  uint32_t         VSI2_CTL;               /* 0x80030F28 */
-  uint32_t         VSI2_BS;                /* 0x80030F2C */
-  uint32_t         VSI2_BD;                /* 0x80030F30 */
-  uint32_t         VSI2_TO;                /* 0x80030F34 */
-  uint32_t         Buf_0x80030F38;         /* 0x80030F38 */
-  uint32_t         VSI3_CTL;               /* 0x80030F3C */
-  uint32_t         VSI3_BS;                /* 0x80030F40 */
-  uint32_t         VSI3_BD;                /* 0x80030F44 */
-  uint32_t         VSI3_TO;                /* 0x80030F48 */
-  uint32_t         Buf_0x80030F4C[ 0x9 ];  /* 0x80030F4C */
-  uint32_t         VRAI_CTL;               /* 0x80030F70 */
-  uint32_t         VRAI_BS;                /* 0x80030F74 */
-  uint32_t         Buf_0x80030F78[ 0x2 ];  /* 0x80030F78 */
-  uint32_t         VCSR_CTL;               /* 0x80030F80 */
-  uint32_t         VCSR_TO;                /* 0x80030F84 */
-  uint32_t         V_AMERR;                /* 0x80030F88 */
-  uint32_t         VAERR;                  /* 0x80030F8C */
-  uint32_t         Buf_0x80030F90[ 0x19 ]; /* 0x80030F90 */
-  uint32_t         VCSR_CLR;               /* 0x80030FF4 */
-  uint32_t         VCSR_SET;               /* 0x80030FF8 */
-  uint32_t         VCSR_BS;                /* 0x80030FFC */
-} Universe_Memory;
-
-volatile Universe_Memory *UNIVERSE =
-                         (volatile Universe_Memory *)SCORE603E_UNIVERSE_BASE;
-
-/********************************************************************
- ********************************************************************
- *********                                                  *********
- *********                                                  *********
- *********                                                  *********
- ********************************************************************
- ********************************************************************/
-
-/*
- * Initializes the UNIVERSE chip.  This routine is called automatically
- * by the boot code.  This routine should be called by user code only if
- * a complete SCORE603e VME initialization is required.
- */
-void initialize_universe(void)
-{
-  uint32_t         jumper_selection;
-  uint32_t         pci_id;
-
-  /*
-   * Read the VME jumper location to determine the VME base address
-   */
-  jumper_selection = PCI_bus_read(
-                     (volatile uint32_t*)SCORE603E_VME_JUMPER_ADDR );
-  printk("initialize_universe: Read 0x%x = 0x%x\n",
-          SCORE603E_VME_JUMPER_ADDR, jumper_selection);
-  jumper_selection = (jumper_selection >> 3) & 0x1f;
-
-  /*
-   * Verify the UNIVERSE CHIP ID
-   */
-   pci_id = Read_pci_device_register( SCORE603E_IO_VME_UNIVERSE_BASE );
-
-   /*
-    * compare to known ID
-    */
-   if (pci_id !=  SCORE603E_UNIVERSE_CHIP_ID ){
-     printk ("Invalid SCORE603E_UNIVERSE_CHIP_ID: 0x08%" PRId32 "\n", pci_id);
-     rtems_fatal_error_occurred( 0x603e0bad );
-   } else {
-     printk("initialize_universe: Reg 0x%x read 0x%x\n",
-     SCORE603E_IO_VME_UNIVERSE_BASE, pci_id );
-   }
-
-   /*
-    * Do not modify the DINK setup of the universe chip.
-    */
-}
-
-/*
- * Set the slave VME base address to the specified base address.
- * Note: Lower 12 bits[11:0] will be masked out prior to setting the VMEbus
- *       Slave Image 0 registers.
- */
-void set_vme_base_address (
-  uint32_t         base_address
-)
-{
-  volatile uint32_t         temp;
-
-  /*
-   * Calculate the current size of the Slave VME image 0
-   */
-  temp = ( PCI_bus_read( &UNIVERSE->VSI0_BD) & 0xFFFFF000) -
-          ( PCI_bus_read( &UNIVERSE->VSI0_BS) & 0xFFFFF000);
-
-  /*
-   * Set the VMEbus Slave Image 0 Base Address to be
-   * the specifed base address on VSI0_BS register.
-   */
-   PCI_bus_write( &UNIVERSE->VSI0_BS, (base_address & 0xFFFFF000) );
-
-  /*
-   * Update the VMEbus Slave Image 0 Bound Address.
-   */
-  PCI_bus_write( &UNIVERSE->VSI0_BD, temp );
-
-  /*
-   * Update the VMEbus Slave Image 0 Translation Offset
-   */
-  temp = 0xFFFFFFFF - (base_address & 0xFFFFF000) + 1 + 0x80000000;
-  PCI_bus_write( &UNIVERSE->VSI0_TO, temp );
-}
-
-/*
- * Gets the VME base address
- */
-static uint32_t get_vme_base_address (void)
-{
-  volatile uint32_t         temp;
-
-  temp = PCI_bus_read( &UNIVERSE->VSI0_BS );
-  temp &= 0xFFFFF000;
-  return (temp);
-}
-
-uint32_t get_vme_slave_size(void)
-{
-  volatile uint32_t         temp;
-  temp  =  PCI_bus_read( &UNIVERSE->VSI0_BD);
-  temp &= 0xFFFFF000;
-  temp  = temp - get_vme_base_address ();
-  return temp;
-}
-
-/*
- * Set the size of the VME slave image
- * Note: The maximum size is up to 24 M bytes. (00000000 - 017FFFFF)
- */
-void set_vme_slave_size (uint32_t size)
-{
-  volatile uint32_t         temp;
-
-  if (size<0)
-    size = 0;
-
-  if (size > 0x17FFFFF)
-    size = 0x17FFFFF;
-
-  /*
-   * Read the VME slave image base address
-   */
-  temp = get_vme_base_address ();
-
-  /*
-   * Update the VMEbus Slave Image 0 Bound Address.
-   */
-  temp = temp + (size & 0xFFFFF000);
-  PCI_bus_write( &UNIVERSE->VSI0_BD, temp );
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/README b/c/src/lib/libbsp/powerpc/score603e/README
deleted file mode 100644
index 1caa2bd..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/README
+++ /dev/null
@@ -1,53 +0,0 @@
-BSP NAME:           score603e
-BOARD:              VISTA SCORE 603e Generation II and beyond
-BUS:                N/A
-CPU FAMILY:         ppc
-CPU:                PowerPC 603e
-COPROCESSORS:       N/A
-MODE:               32 bit mode
-
-DEBUG MONITOR:      see note.
-
-PERIPHERALS
-===========
-TIMERS:             PPC internal Timebase register
-  RESOLUTION:         
-SERIAL PORTS:       2 Z85C30s
-REAL-TIME CLOCK:    Generation II and beyond: ICM7170AIBG
-DMA:                none
-VIDEO:              none
-SCSI:               none
-NETWORKING:         none
-
-DRIVER INFORMATION
-==================
-CLOCK DRIVER:       PPC internal
-IOSUPP DRIVER:      N/A
-SHMSUPP:            N/A
-TIMER DRIVER:       PPC internal
-TTY DRIVER:         PPC internal
-
-STDIO
-=====
-PORT:               Console port 0
-ELECTRICAL:         na
-BAUD:               9600
-BITS PER CHARACTER: 8
-PARITY:             n
-STOP BITS:          1
-
-Notes
-=====
-This BSP has been modified to use the latest exception model.
-However, the modifications were never verified.  This version
-has been partially verified in that Hello.ralf will load and
-run on the board.
-
-This BSP has been tested using DINK Rom monitor.  There have
-been three rom chips loaded on the boards.  One with the SDS
-debug monitor, one with the firmworks monitor, and one with
-the DINK monitor.
-
-The SCORE603e first generation board is no longer available,
-does not appear to be in use by any RTEMS users, and thus
-is no longer supported.
diff --git a/c/src/lib/libbsp/powerpc/score603e/bsp_specs b/c/src/lib/libbsp/powerpc/score603e/bsp_specs
deleted file mode 100644
index 9f89281..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/bsp_specs
+++ /dev/null
@@ -1,13 +0,0 @@
-%rename endfile old_endfile
-%rename startfile old_startfile
-%rename link old_link
-
-*startfile:
-%{!qrtems: %(old_startfile)} \
-%{!nostdlib: %{qrtems: ecrti%O%s rtems_crti%O%s crtbegin.o%s start.o%s -e start -u __vectors}}
-
-*endfile:
-%{!qrtems: %(old_endfile)} %{qrtems: crtend.o%s ecrtn.o%s}
-
-*link:
-%{!qrtems: %(old_link)} %{qrtems: -dc -dp -N}
diff --git a/c/src/lib/libbsp/powerpc/score603e/configure.ac b/c/src/lib/libbsp/powerpc/score603e/configure.ac
deleted file mode 100644
index b65c50c..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/configure.ac
+++ /dev/null
@@ -1,84 +0,0 @@
-## Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.69])
-AC_INIT([rtems-c-src-lib-libbsp-powerpc-ep1a],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
-AC_CONFIG_SRCDIR([bsp_specs])
-RTEMS_TOP(../../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])
-RTEMS_BSP_CONFIGURE
-
-RTEMS_PROG_CC_FOR_TARGET
-RTEMS_CANONICALIZE_TOOLS
-RTEMS_PROG_CCAS
-
-RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[])
-RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED
-
-RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[])
-RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED
-
-## FIXME: This should be a 1 out of 3 selection
-## and is somehow coupled to USE_DINK (cf. include/gen2.h)
-RTEMS_BSPOPTS_SET([SCORE603E_USE_SDS],[*],[0])
-RTEMS_BSPOPTS_HELP([SCORE603E_USE_SDS],
-[use SDS ROM monitor])
-
-RTEMS_BSPOPTS_SET([SCORE603E_OPEN_FIRMWARE],[*],[0])
-RTEMS_BSPOPTS_HELP([SCORE603E_OPEN_FIRMWARE],
-[use Open Firmware ROM monitor])
-
-RTEMS_BSPOPTS_SET([SCORE603E_USE_NONE],[*],[0])
-RTEMS_BSPOPTS_HELP([SCORE603E_USE_NONE],
-[use no ROM monitor])
-
-RTEMS_BSPOPTS_SET([SCORE603E_USE_DINK],[*],[1])
-RTEMS_BSPOPTS_HELP([SCORE603E_USE_DINK],
-[FIXME: Missing explanation.])
-
-RTEMS_BSPOPTS_SET([CONSOLE_USE_INTERRUPTS],[*],[0])
-RTEMS_BSPOPTS_HELP([CONSOLE_USE_INTERRUPTS],
-[whether using console interrupts])
-
-RTEMS_BSPOPTS_SET([HAS_PMC_PSC8],[*],[1])
-RTEMS_BSPOPTS_HELP([HAS_PMC_PSC8],
-[whether has a PSC8 PMC board attached to PMC slot])
-
-RTEMS_BSPOPTS_SET([INITIALIZE_COM_PORTS],[*],[0])
-RTEMS_BSPOPTS_HELP([INITIALIZE_COM_PORTS],
-[FIXME: Missing explanation])
-
-RTEMS_BSPOPTS_SET([PPC_USE_SPRG],[*],[0])
-RTEMS_BSPOPTS_HELP([PPC_USE_SPRG],
-[If defined, then the PowerPC specific code in RTEMS will use some
-of the special purpose registers to slightly optimize interrupt
-response time.  The use of these registers can conflict with
-other tools like debuggers.])
-
-RTEMS_BSPOPTS_SET([CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK], [*], [1])
-RTEMS_BSPOPTS_HELP([CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK],
-[If defined then the BSP may reduce the available memory size
-initially. This can be useful for debugging (reduce the core
-size) or dynamic loading (std gcc text offsets/jumps are < +/-32M).
-Note that the policy can still be defined by the application
-(see sbrk.c, BSP_sbrk_policy). By undefining
-CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK this feature is removed
-and a little memory is saved.])
-
-RTEMS_BSPOPTS_SET([PPC_VECTOR_FILE_BASE],[*],[0x0100])
-RTEMS_BSPOPTS_HELP([PPC_VECTOR_FILE_BASE],
-[This defines the base address of the exception table.
- NOTE: Vectors are actually at 0xFFF00000 but file starts at offset.])
-
-RTEMS_CHECK_NETWORKING
-AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
-
-RTEMS_BSP_CLEANUP_OPTIONS(0, 0)
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-
-RTEMS_PPC_EXCEPTIONS
-
-AC_OUTPUT
diff --git a/c/src/lib/libbsp/powerpc/score603e/console/85c30.c b/c/src/lib/libbsp/powerpc/score603e/console/85c30.c
deleted file mode 100644
index 42dafce..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/console/85c30.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- *  This file contains the console driver chip level routines for the
- *  z85c30 chip.
- *
- *  Currently only polled mode is supported.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <rtems.h>
-#include <bsp.h>
-#include <rtems/libio.h>
-#include <assert.h>
-
-#include "85c30.h"
-#include "consolebsp.h"
-
-#define STATUS_REGISTER     0x00
-#define DATA_REGISTER       0x08
-
-#define Z8530_Status_Is_RX_character_available( _status ) \
-  ( (_status) & 0x01 )
-
-#define Z8530_Status_Is_TX_buffer_empty( _status ) \
-  ( (_status) & 0x04 )
-
-#define Z8530_Status_Is_break_abort( _status ) \
-  ( (_status) & 0x80 )
-
-typedef struct {
-  unsigned char read_setup;
-  unsigned char write_setup;
-  unsigned char mask_value;
-} char_size_info;
-
-static const char_size_info Char_size_85c30[] = {
-  { Z8530_READ_CHARACTER_BITS_8, Z8530_WRITE_CHARACTER_BITS_8, 0xFF },
-  { Z8530_READ_CHARACTER_BITS_7, Z8530_WRITE_CHARACTER_BITS_7, 0x7F },
-  { Z8530_READ_CHARACTER_BITS_6, Z8530_WRITE_CHARACTER_BITS_6, 0x3F },
-  { Z8530_READ_CHARACTER_BITS_5, Z8530_WRITE_CHARACTER_BITS_5, 0x1F }
-};
-
-static const unsigned char Clock_speed_85c30[] = {
-  Z8530_x1_CLOCK, Z8530_x16_CLOCK, Z8530_x32_CLOCK,  Z8530_x64_CLOCK };
-
-static const unsigned char Stop_bit_85c30[] = {
-  Z8530_STOP_BITS_1, Z8530_STOP_BITS_1_AND_A_HALF, Z8530_STOP_BITS_2 };
-
-static const unsigned char Parity_85c30[] = {
-  Z8530_PARITY_NONE, Z8530_PARITY_ODD, Z8530_PARITY_EVEN };
-
-/* PAGE
- *
- * Read_85c30_register
- *
- * Read a Z85c30 register
- */
-static unsigned char Read_85c30_register(
-  volatile unsigned char *csr,                        /* IN  */
-  unsigned char  register_number                      /* IN  */
-)
-{
-  unsigned char Data;
-
-  *csr = register_number;
-
-  rtems_bsp_delay_in_bus_cycles( 40 );
-
-  Data = *csr;
-
-  rtems_bsp_delay_in_bus_cycles( 40 );
-
-  return Data;
-}
-
-/*
- * Write_85c30_register
- *
- *  Write a Z85c30 register
- */
-static void  Write_85c30_register(
-  volatile unsigned char  *csr,                     /* IN  */
-  unsigned char  register_number,                   /* IN  */
-  unsigned char  data                               /* IN  */
-)
-{
-  *csr = register_number;
-
-  rtems_bsp_delay_in_bus_cycles( 40 );
-  *csr = data;
-  rtems_bsp_delay_in_bus_cycles( 40 );
-}
-
-/* PAGE
- *
- *  Reset_85c30_chip
- *
- *  Reset a 85c30 chip.  The pointers for the control registers for both
- *  ports on the chip are used as input.
- */
-void Reset_85c30_chip(
-  volatile unsigned char *ctrl_0,                     /* IN  */
-  volatile unsigned char *ctrl_1                      /* IN  */
-)
-{
-  Write_85c30_register( ctrl_0, 0x09, 0x80 );
-  Write_85c30_register( ctrl_1, 0x09, 0x40 );
-}
-
-/* PAGE
- *
- * initialize_85c30_port
- *
- * initialize a z85c30 Port
- */
-void initialize_85c30_port(
-  const Port_85C30_info *Port
-)
-{
-  uint16_t                value;
-  volatile unsigned char *ctrl;
-  Console_Protocol        *Setup;
-  uint16_t                baud_constant;
-
-  Setup = Port->Protocol;
-  ctrl  = Port->ctrl;
-
-  baud_constant = _Score603e_Z8530_Baud( Port->Chip->clock_frequency,
-    Port->Chip->clock_x, Setup->baud_rate );
-
-  /*
-   * Using register 4
-   * Set up the clock rate.
-   */
-  value = Clock_speed_85c30[ Port->Chip->clock_speed ] |
-          Stop_bit_85c30[ Setup->stop_bits ] |
-          Parity_85c30[ Setup->parity ];
-  Write_85c30_register( ctrl, 0x04, value );
-
-  /*
-   *  Set Write Register 1 to disable all interrupts
-   */
-  Write_85c30_register( ctrl, 1, 0 );
-
-#if CONSOLE_USE_INTERRUPTS
-  /*
-   *  Set Write Register 2 to contain the interrupt vector
-   */
-  Write_85c30_register( ctrl, 2, Port->Chip->vector );
-#endif
-
-  /*
-   *  Set Write Register 3 to disable the Receiver
-   */
-  Write_85c30_register( ctrl, 0x03, 0x00 );
-
-  /*
-   *  Set Write Register 5 to disable the Transmitter
-   */
-  Write_85c30_register( ctrl, 5, 0x00 );
-
-  /* WR 6 -- unneeded in asynchronous mode */
-
-  /* WR 7 -- unneeded in asynchronous mode */
-
-  /*
-   *  Set Write Register 9 to disable all interrupt sources
-   */
-  Write_85c30_register( ctrl, 9, 0x00 );
-
-  /*
-   *  Set Write Register 10 for simple Asynchronous operation
-   */
-  Write_85c30_register( ctrl, 0x0a, 0x00 );
-
-  /*
-   * Setup the source of the receive and xmit
-   * clock as BRG output and the transmit clock
-   * as the output source for TRxC pin via register 11
-   */
-  Write_85c30_register( ctrl, 0x0b, 0x56 );
-
-  value = baud_constant;
-
-  /*
-   * Setup the lower 8 bits time constants = 1E.
-   * If the time constans = 1E, then the desire
-   * baud rate will be equilvalent to 9600, via register 12.
-   */
-  Write_85c30_register( ctrl, 0x0c, value & 0xff );
-
-  /*
-   * using register 13
-   * Setup the upper 8 bits time constants = 0
-   */
-  Write_85c30_register( ctrl, 0x0d, value>>8 );
-
-  /*
-   * Set the DTR/REQ pin goes low when transmit
-   * buffer becomes empty and enable the baud
-   * rate generator enable with clock from the
-   * SCC's PCLK input via register 14.
-   */
-  Write_85c30_register( ctrl, 0x0e, 0x07 );
-
-  /*
-   *  Set Write Register 3 : Base Value is xx00_000x
-   *     D6 - D7 : Receive Character Length               (configured)
-   *     D5      : Auto Enable                            (forced value)
-   *     D4      : Enter Hunt Phase                       (forced value)
-   *     D3      : Receive CRC Enable                     (forced value)
-   *     D2      : Address Search Mode (0 if not SDLC)    (forced value)
-   *     D1      : Sync Character Load Inhibit            (forced value)
-   *     D0      : Receiver Enable                        (configured)
-   */
-  value = 0x01;
-  value = value | Char_size_85c30[ Setup->read_char_bits ].read_setup;
-
-  Write_85c30_register( ctrl, 0x03, value );
-
-  /*
-   *  Set Write Register 5 : Base Value is 0xx0_x000
-   *     D7      : Data Terminal Ready (DTR)              (forced value)
-   *     D5 - D6 : Transmit Character Length              (configured)
-   *     D4      : Send Break                             (forced value)
-   *     D3      : Transmitter Enable                     (configured)
-   *     D2      : CRC Select                             (forced value)
-   *     D1      : Request to Send                        (forced value)
-   *     D0      : Transmit CRC Enable                    (forced value)
-   */
-  value = 0x8a;
-  value = value |  Char_size_85c30[ Setup->write_char_bits ].write_setup;
-  Write_85c30_register( ctrl, 0x05, value );
-
-  /*
-   * Reset Tx UNDERRUN/EOM LATCH and ERROR
-   * via register 0
-   */
-   Write_85c30_register( ctrl, 0x00, 0xf0 );
-
-#if CONSOLE_USE_INTERRUPTS
-  /*
-   *  Set Write Register 1 to interrupt on Rx characters or special condition.
-   */
-  Write_85c30_register( ctrl, 1, 0x10 );
-#endif
-
-  /*
-   *  Set Write Register 15 to disable extended functions.
-   */
-
-  Write_85c30_register( ctrl, 15, 0x00 );
-
-  /*
-   *  Set the Command Register to Reset Ext/STATUS.
-   */
-  Write_85c30_register( ctrl, 0x00, 0x10 );
-
-#if CONSOLE_USE_INTERRUPTS
-
-  /*
-   *  Set Write Register 1 : Base Value is 0001_0110
-   *    Enables Rx interrupt on all characters and special conditions.
-   *    Enables parity as a special condition.
-   *    Enables Tx interrupt.
-   */
-  Write_85c30_register( ctrl, 1, 0x16 );
-
-  /*
-   *  Set Write Register 9 to enable all interrupt sources
-   *  Changed from 0 to a
-   */
-  Write_85c30_register( ctrl, 9, 0x0A );
-
-  /* XXX */
-
-  /*
-   *  Issue reset highest Interrupt Under Service (IUS) command.
-   */
-  Write_85c30_register( Port->ctrl, STATUS_REGISTER, 0x38 );
-
-#endif
-
-}
-
-/* PAGE
- *
- *  outbyte_polled_85c30
- *
- *  This routine transmits a character using polling.
- */
-
-void outbyte_polled_85c30(
-  volatile unsigned char  *csr,                     /* IN  */
-  char ch                                           /* IN  */
-)
-{
-  unsigned char       z8530_status;
-  uint32_t            isrlevel;
-
-  rtems_interrupt_disable( isrlevel );
-
-  /*
-   * Wait for the Transmit buffer to indicate that it is empty.
-   */
-  do {
-    z8530_status = Read_85c30_register( csr, STATUS_REGISTER );
-  } while ( !Z8530_Status_Is_TX_buffer_empty( z8530_status ) );
-
-  /*
-   * Write the character.
-   */
-  Write_85c30_register( csr, DATA_REGISTER, (unsigned char) ch );
-
-  rtems_interrupt_enable( isrlevel );
-}
-
-/* PAGE
- *
- *  inbyte_nonblocking_85c30
- *
- *  This routine polls for a character.
- */
-
-int inbyte_nonblocking_85c30(
-  const Port_85C30_info      *Port
-)
-{
-  volatile unsigned char  *csr;
-  unsigned char   z8530_status;
-  uint8_t         data;
-
-  csr = Port->ctrl;
-
-  /*
-   * return -1 if a character is not available.
-   */
-  z8530_status = Read_85c30_register( csr, STATUS_REGISTER );
-  if ( !Z8530_Status_Is_RX_character_available( z8530_status ) )
-    return -1;
-
-  /*
-   * Return the character read.
-   */
-  data = Read_85c30_register( csr, DATA_REGISTER );
-  data &= Char_size_85c30[ Port->Protocol->read_char_bits ].mask_value;
-
-  return data;
-}
-
-/*
- *  Interrupt driven console IO
- */
-
-#if CONSOLE_USE_INTERRUPTS
-
-/*
- *  Z8530_Async_Channel_ISR
- */
-/* RR0 */
-
-rtems_isr ISR_85c30_Async(
-   const Port_85C30_info   *Port
-)
-{
-  uint16_t                   status;
-  volatile Console_Protocol *Protocol;
-  unsigned char              data;
-  bool                       did_something = false;
-
-  Protocol = Port->Protocol;
-
-  status = Read_85c30_register( Port->ctrl, 0x00 );
-
-  /*
-   *  Was this a RX interrupt?  If so, then process it.
-   */
-
-  if ( Z8530_Status_Is_RX_character_available( status ) ) {
-    data = Read_85c30_register( Port->ctrl, DATA_REGISTER );
-    data &= Char_size_85c30[ Port->Protocol->read_char_bits ].mask_value;
-
-    rtems_termios_enqueue_raw_characters( Port->Protocol->console_termios_data,
-       &data, 1 );
-    did_something = true;
-  }
-
-  /*
-   *  Was this a TX empty interrupt?  If so, then process it.
-   */
-
-  if (Z8530_Status_Is_TX_buffer_empty( status ) ) {
-    if ( !Ring_buffer_Is_empty( &Protocol->TX_Buffer ) ) {
-      Ring_buffer_Remove_character( &Protocol->TX_Buffer, data );
-      Write_85c30_register( Port->ctrl, DATA_REGISTER, data );
-
-    } else {
-      Protocol->Is_TX_active = false;
-      Write_85c30_register( Port->ctrl, STATUS_REGISTER, 0x28 );
-    }
-
-    did_something = true;
-  }
-
-  /*
-   *  Issue reset highest Interrupt Under Service (IUS) command.
-   */
-
-  /*
-   if ( did_something )
-   */
-     Write_85c30_register( Port->ctrl, STATUS_REGISTER, 0x38 );
-}
-
-#endif
diff --git a/c/src/lib/libbsp/powerpc/score603e/console/85c30.h b/c/src/lib/libbsp/powerpc/score603e/console/85c30.h
deleted file mode 100644
index 7fb9df7..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/console/85c30.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*  85c30.h
- *
- *  This include file contains z85c30 chip information.
- *
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef __85c30_H
-#define __85c30_H
-
-/*
- * Clock Speed Definations
- */
-
-#define Z8530_x1_CLOCK                        0x00
-#define Z8530_x16_CLOCK                       0x40
-#define Z8530_x32_CLOCK                       0x80
-#define Z8530_x64_CLOCK                       0xC0
-
-/*
- * Number of Stop Bits.
- */
-#define Z8530_STOP_BITS_1                     0x04
-#define Z8530_STOP_BITS_1_AND_A_HALF          0x08
-#define Z8530_STOP_BITS_2                     0x0C
-
-/*
- * PARITY
- */
-#define Z8530_PARITY_NONE                     0x00
-#define Z8530_PARITY_ODD                      0x01
-#define Z8530_PARITY_EVEN                     0x03
-
-/*
- * Character Bits
- */
-#define Z8530_READ_CHARACTER_BITS_8           0xC0
-#define Z8530_READ_CHARACTER_BITS_7           0x40
-#define Z8530_READ_CHARACTER_BITS_6           0x80
-#define Z8530_READ_CHARACTER_BITS_5           0x00
-
-#define Z8530_WRITE_CHARACTER_BITS_8          0x60
-#define Z8530_WRITE_CHARACTER_BITS_7          0x20
-#define Z8530_WRITE_CHARACTER_BITS_6          0x40
-#define Z8530_WRITE_CHARACTER_BITS_5          0x00
-
-#endif
diff --git a/c/src/lib/libbsp/powerpc/score603e/console/console.c b/c/src/lib/libbsp/powerpc/score603e/console/console.c
deleted file mode 100644
index afbc5b4..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/console/console.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- *  This file contains the TTY driver for the serial ports on the SCORE603e.
- *
- *  This driver uses the termios pseudo driver.
- *
- *  Currently only polled mode is supported.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2014.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <rtems/libio.h>
-#include <stdlib.h>
-#include <assert.h>
-
-#include "consolebsp.h"
-#include <rtems/bspIo.h>
-
-/*
- * The Port Used for the Console interface is based upon which
- * debugger is being used.  The SDS debugger uses a binary
- * interface on port 0 as part of the debugger.  Thus port 0 can
- * not be used as the console port for the SDS debugger.
- */
-
-#define USE_FOR_CONSOLE_DEF  0
-int USE_FOR_CONSOLE = USE_FOR_CONSOLE_DEF;
-
-/*
- *
- *  Console Device Driver Entry Points
- */
-
-/*
- *  console_inbyte_nonblocking
- *
- *  Console Termios polling input entry point.
- */
-static int console_inbyte_nonblocking(
-  int minor
-)
-{
-  int                       port = minor;
-
-  /*
-   * verify port Number
-   */
-  assert ( port < NUM_Z85C30_PORTS );
-
-  /*
-   * return a character from the 85c30 port.
-   */
-  return inbyte_nonblocking_85c30( &Ports_85C30[ port ] );
-}
-
-rtems_device_driver console_close(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return rtems_termios_close (arg);
-}
-
-rtems_device_driver console_read(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return rtems_termios_read (arg);
-}
-
-rtems_device_driver console_write(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return rtems_termios_write (arg);
-}
-
-rtems_device_driver console_control(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return rtems_termios_ioctl (arg);
-}
-
-/*
- *  Interrupt driven console IO
- */
-
-#if CONSOLE_USE_INTERRUPTS
-
-rtems_isr console_isr(
-  rtems_vector_number vector
-)
-{
-  int  i;
-
-  for (i=0; i < NUM_Z85C30_PORTS; i++){
-      ISR_85c30_Async( &Ports_85C30[i] );
-  }
-}
-
-void console_exit()
-{
-  int i;
-  volatile Ring_buffer_t *buffer;
-  uint32_t         ch;
-
-  for ( i=0 ; i < NUM_Z85C30_PORTS ; i++ ) {
-
-    buffer = &( Ports_85C30[i].Protocol->TX_Buffer);
-
-    while ( !Ring_buffer_Is_empty( buffer ) ) {
-      Ring_buffer_Remove_character( buffer, ch );
-      outbyte_polled_85c30( Ports_85C30[i].ctrl, ch );
-    }
-  }
-}
-
-void console_initialize_interrupts( void )
-{
-  volatile Ring_buffer_t     *buffer;
-  Console_Protocol  *protocol;
-  int               i;
-
-  for ( i=0 ; i < NUM_Z85C30_PORTS ; i++ ) {
-    protocol = Ports_85C30[i].Protocol;
-
-    /*
-     * Initialize the ring buffer and set to not transmitting.
-     */
-    buffer = &protocol->TX_Buffer;
-    Ring_buffer_Initialize( buffer );
-    protocol->Is_TX_active = false;
-  }
-
-  /*
-   * Connect each vector to the interupt service routine.
-   */
-  for (i=0; i < NUM_Z85C30_CHIPS; i++)
-    set_vector( console_isr, Chips_85C30[i].vector, 1 );
-  #warning "Install interrupts using proper method for PIC vectors."
-
-  atexit( console_exit );
-
-}
-void console_outbyte_interrupts(
-  const Port_85C30_info *Port,
-  char ch
-);
-
-#endif
-
-/*
- *  console_initialize
- *
- *  Routine called to initialize the console device driver.
- */
-rtems_device_driver console_initialize(
-  rtems_device_major_number  major,
-  rtems_device_minor_number  minor,
-  void                      *arg
-)
-{
-  rtems_status_code          status;
-  rtems_device_minor_number  console;
-  int                        port, p0,p1;
-
-  /*
-   * initialize the termio interface.
-   */
-  rtems_termios_initialize();
-
-  /*
-   *  Register Device Names
-   */
-  console = USE_FOR_CONSOLE;
-  status = rtems_io_register_name( "/dev/console", major, console );
-  if (status != RTEMS_SUCCESSFUL)
-    rtems_fatal_error_occurred(status);
-
-  /*
-   *  Initialize Hardware
-   */
-
-/*
- * INITIALIZE_COM_PORTS is defined in the linker script.  If it is
- * true all serial chips on the board are to be reset at startup
- * otherwise the reset is assumed to occur elsewhere (ie. in the
- * debugger...)
- */
-#if ( INITIALIZE_COM_PORTS )
-  /*
-   * Force to perform a hardware reset w/o
-   * Master interrupt enable via register 9
-   */
-
-  for (port=0; port<NUM_Z85C30_PORTS; port++){
-    p0 = port;
-    port++;
-    p1 = port;
-    Reset_85c30_chip( Ports_85C30[p0].ctrl, Ports_85C30[p1].ctrl );
-  }
-#else
-  /* TEMP - To see if this makes a diff with the new ports.
-   *        Never reset chip 1 when using the chip as a monitor
-   */
-  for (port=2; port<NUM_Z85C30_PORTS; port++){
-    p0 = port;
-    port++;
-    p1 = port;
-    Reset_85c30_chip( Ports_85C30[p0].ctrl, Ports_85C30[p1].ctrl );
-  }
-#endif
-
-  /*
-   * Initialize each port.
-   * Note:  the ports are numbered such that 0,1 are on the first chip
-   *        2,3 are on the second ....
-   */
-
-  for (port=1; port<NUM_Z85C30_PORTS; port++) {
-    initialize_85c30_port( &Ports_85C30[port] );
-  }
-
-#if CONSOLE_USE_INTERRUPTS
-  console_initialize_interrupts();
-#endif
-
-  return RTEMS_SUCCESSFUL;
-}
-
-/*
- *  console_write_support
- *
- *  Console Termios output entry point.
- *
- */
-static ssize_t console_write_support(
-  int   minor,
-  const char *buf,
-  size_t   len)
-{
-  int nwrite = 0;
-  volatile uint8_t         *csr;
-  int                       port = minor;
-
-  /*
-   * verify port Number
-   */
-  assert ( port < NUM_Z85C30_PORTS );
-
-  /*
-   * Set the csr based upon the port number.
-   */
-  csr = Ports_85C30[ port ].ctrl;
-
-  /*
-   * poll each byte in the string out of the port.
-   */
-  while (nwrite < len) {
-#if (CONSOLE_USE_INTERRUPTS)
-    console_outbyte_interrupts( &Ports_85C30[ port ], *buf++ );
-#else
-    outbyte_polled_85c30( csr, *buf++ );
-#endif
-   nwrite++;
-  }
-
-  /*
-   * return the number of bytes written.
-   */
-  return nwrite;
-}
-
-/*
- *  console_open
- *
- *  open a port as a termios console.
- */
-rtems_device_driver console_open(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  rtems_status_code sc;
-  int               port = minor;
-#if (CONSOLE_USE_INTERRUPTS)
-  rtems_libio_open_close_args_t *args = arg;
-  static const rtems_termios_callbacks intrCallbacks = {
-    NULL,                       /* firstOpen */
-    NULL,                       /* lastClose */
-    NULL,                       /* pollRead */
-    console_write_support,      /* write */
-    NULL,                       /* setAttributes */
-    NULL,                       /* stopRemoteTx */
-    NULL,                       /* startRemoteTx */
-    1                           /* outputUsesInterrupts */
-  };
-#else
-  static const rtems_termios_callbacks pollCallbacks = {
-    NULL,                       /* firstOpen */
-    NULL,                       /* lastClose */
-    console_inbyte_nonblocking, /* pollRead */
-    console_write_support,      /* write */
-    NULL,                       /* setAttributes */
-    NULL,                       /* stopRemoteTx */
-    NULL,                       /* startRemoteTx */
-    0                           /* outputUsesInterrupts */
-  };
-#endif
-
-  /*
-   * Verify the minor number is valid.
-   */
-  if (minor < 0)
-    return RTEMS_INVALID_NUMBER;
-
-  if ( port > NUM_Z85C30_PORTS )
-     return RTEMS_INVALID_NUMBER;
-
-  /*
-   *  open the port as a termios console driver.
-   */
-
-#if (CONSOLE_USE_INTERRUPTS)
-   sc = rtems_termios_open( major, minor, arg, &intrCallbacks );
-
-   Ports_85C30[ minor ].Protocol->console_termios_data = args->iop->data1;
-#else
-   sc = rtems_termios_open( major, minor, arg, &pollCallbacks );
-#endif
-
-  return sc;
-}
-
-#if (CONSOLE_USE_INTERRUPTS)
-/*
- *  console_outbyte_interrupts
- *
- *  This routine transmits a character out.
- */
-void console_outbyte_interrupts(
-  const Port_85C30_info *Port,
-  char ch
-)
-{
-  Console_Protocol   *protocol;
-  uint32_t            isrlevel;
-
-  protocol = Port->Protocol;
-
-  /*
-   *  If this is the first character then we need to prime the pump
-   */
-
-  if ( protocol->Is_TX_active == false ) {
-
-    rtems_interrupt_disable( isrlevel );
-    protocol->Is_TX_active = true;
-    outbyte_polled_85c30( Port->ctrl, ch );
-    rtems_interrupt_enable( isrlevel );
-
-    return;
-  }
-
-  while ( Ring_buffer_Is_full( &protocol->TX_Buffer ) );
-
-  Ring_buffer_Add_character( &protocol->TX_Buffer, ch );
-}
-#endif
-
-/* const char arg to be compatible with BSP_output_char decl. */
-static void debug_putc_onlcr(const char c)
-{
-  int                      console;
-  volatile uint8_t         *csr;
-  uint32_t                 isrlevel;
-
-  console = USE_FOR_CONSOLE;
-  csr = Ports_85C30[ console ].ctrl;
-
-  if ('\n'==c){
-    rtems_interrupt_disable( isrlevel );
-    outbyte_polled_85c30( csr, '\r' );
-    __asm__ volatile("isync");
-    rtems_interrupt_enable( isrlevel );
-  }
-
-  rtems_interrupt_disable( isrlevel );
-  outbyte_polled_85c30( csr, c );
-  __asm__ volatile("isync");
-  rtems_interrupt_enable( isrlevel );
-}
-
-BSP_output_char_function_type     BSP_output_char = debug_putc_onlcr;
-BSP_polling_getchar_function_type BSP_poll_char = NULL;
-/* const char arg to be compatible with BSP_output_char decl. */
-
diff --git a/c/src/lib/libbsp/powerpc/score603e/console/consolebsp.h b/c/src/lib/libbsp/powerpc/score603e/console/consolebsp.h
deleted file mode 100644
index d03939a..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/console/consolebsp.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*  consolebsp.h
- *
- *  This include file contains all console driver definations
- *
- *  COPYRIGHT (c) 1989-2010.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef __CONSOLEBSP_H
-#define __CONSOLEBSP_H
-
-#include <rtems.h>
-#include <rtems/ringbuf.h>
-#include <bsp.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- *
- * Note:  The Ports are numbered 0..NUM_Z85C30_CHIPS with port 0 and 1
- *        being on the first chip, and ports 2 and 3 being on the
- *        second chip...
- */
-
-/*
- * Z85c30 configuration informaiton.
- */
-
-#if (HAS_PMC_PSC8)
-#define NUM_Z85C30_CHIPS_ON_MEZZANINE  4
-#else
-#define NUM_Z85C30_CHIPS_ON_MEZZANINE  0
-#endif
-
-#define NUM_Z85C30_CHIPS       (2 + NUM_Z85C30_CHIPS_ON_MEZZANINE)
-#define NUM_Z85C30_PORTS       (NUM_Z85C30_CHIPS * 2)
-
-typedef enum {
-  CONSOLE_x1_CLOCK,
-  CONSOLE_x16_CLOCK,
-  CONSOLE_x32_CLOCK,
-  CONSOLE_x64_CLOCK,
-} CONSOLE_Clock_speed;
-
-typedef enum {
-  CONSOLE_STOP_BITS_1,
-  CONSOLE_STOP_BITS_1_AND_A_HALF,
-  CONSOLE_STOP_BITS_2,
-} CONSOLE_Stop_bits;
-
-typedef enum {
-  CONSOLE_PARITY_NONE,
-  CONSOLE_PARITY_ODD,
-  CONSOLE_PARITY_EVEN,
-} CONSOLE_Parity;
-
-typedef enum {
-  CONSOLE_CHARACTER_BITS_8,
-  CONSOLE_CHARACTER_BITS_7,
-  CONSOLE_CHARACTER_BITS_6,
-  CONSOLE_CHARACTER_BITS_5,
-} CONSOLE_Character_bits;
-
-typedef struct {
-  uint32_t                baud_rate;         /* baud rate value */
-  CONSOLE_Stop_bits        stop_bits;
-  CONSOLE_Parity           parity;
-  CONSOLE_Character_bits   read_char_bits;
-  CONSOLE_Character_bits   write_char_bits;
-
-#if CONSOLE_USE_INTERRUPTS
-  volatile Ring_buffer_t  TX_Buffer;         /* Transmit Buffer    */
-  volatile bool           Is_TX_active;      /* Transmitting       */
-  void          *console_termios_data;
-#endif
-
-} Console_Protocol;
-
-/*
- * Structure used for chip level information.
- */
-typedef struct {
-  uint32_t               vector;
-  uint32_t               clock_frequency;
-  uint16_t               clock_x;
-  CONSOLE_Clock_speed     clock_speed;
-} Chip_85C30_info;
-
-/*
- * Structure used for port level informaiton.
- */
-typedef struct {
-
-  volatile unsigned char    *ctrl;           /* Port Ctrl byte     */
-  volatile unsigned char    *data;           /* Port data byte     */
-
-  unsigned char              port;          /* Port-id / minor #  */
-
-  Console_Protocol          *Protocol;
-  Chip_85C30_info           *Chip;           /* Chip specific info */
-
-} Port_85C30_info;
-
-/*
- * Console port chip configuration tables.
- */
-extern Chip_85C30_info Chips_85C30 [ NUM_Z85C30_CHIPS ];
-extern const Port_85C30_info Ports_85C30 [ NUM_Z85C30_PORTS ];
-
-/*
- *  85c30.c prototypes.
- */
-void initialize_85c30_port(
-  const Port_85C30_info *Port
-);
-
-void outbyte_polled_85c30(
-  volatile unsigned char  *csr,                     /* IN  */
-  char ch
-);
-
-int inbyte_nonblocking_85c30(
-  const Port_85C30_info      *Port
-);
-
-void Reset_85c30_chip(
-  volatile unsigned char *ctrl_0,
-  volatile unsigned char *ctrl_1
-);
-
-#if CONSOLE_USE_INTERRUPTS
-rtems_isr ISR_85c30_Async(
-   const Port_85C30_info   *Port
-);
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/c/src/lib/libbsp/powerpc/score603e/console/tbl85c30.c b/c/src/lib/libbsp/powerpc/score603e/console/tbl85c30.c
deleted file mode 100644
index 1b4cfd5..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/console/tbl85c30.c
+++ /dev/null
@@ -1,194 +0,0 @@
- /*
- *  This file contains the table for the z85c30 port
- *  used by the console driver.
- *
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include "consolebsp.h"
-#include <bsp.h>
-#include <bsp/irq.h>
-
-#define CONSOLE_DEFAULT_BAUD_RATE            9600
-#define CONSOLE_DEFAULT_BAUD_CONSTANT        Score603e_Z8530_Chip0_Baud(9600)
-
-#define CONSOLE_DEFAULT_STOP_BITS            CONSOLE_STOP_BITS_1
-#define CONSOLE_DEFAULT_PARITY               CONSOLE_PARITY_NONE
-#define CONSOLE_DEFAULT_READ_CHARACTER_BITS  CONSOLE_CHARACTER_BITS_8
-#define CONSOLE_DEFAULT_WRITE_CHARACTER_BITS CONSOLE_CHARACTER_BITS_8
-#define CONSOLE_DEFAULT_CONSOLE_CLOCK        CONSOLE_x16_CLOCK
-
-#define DEFAULT_PROTOCOL  { CONSOLE_DEFAULT_BAUD_RATE,              \
-                            CONSOLE_DEFAULT_STOP_BITS,              \
-                            CONSOLE_DEFAULT_PARITY,                 \
-                            CONSOLE_DEFAULT_READ_CHARACTER_BITS,    \
-                            CONSOLE_DEFAULT_WRITE_CHARACTER_BITS }
-
-/*
- * Tables of information necessary to use the console 85c30 routines.
- */
-Console_Protocol Protocols_85c30 [ NUM_Z85C30_PORTS ] =
-{
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-
-#if (HAS_PMC_PSC8)
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-  DEFAULT_PROTOCOL,
-#endif
-};
-
-/*
- * Table of chip unique information for each chip.
- * See consolebsp.h for the Chip_85C30_info structure defination.
- */
-Chip_85C30_info Chips_85C30 [ NUM_Z85C30_CHIPS ] =
-{
-  {
-    SCORE603E_85C30_0_IRQ,
-    SCORE603E_85C30_0_CLOCK,
-    SCORE603E_85C30_0_CLOCK_X,
-    CONSOLE_DEFAULT_CONSOLE_CLOCK
-  },
-  {
-    SCORE603E_85C30_1_IRQ,
-    SCORE603E_85C30_1_CLOCK,
-    SCORE603E_85C30_1_CLOCK_X,
-    CONSOLE_DEFAULT_CONSOLE_CLOCK
-  },
-
-#if (HAS_PMC_PSC8)
-  {
-    SCORE603E_85C30_2_IRQ,
-    SCORE603E_85C30_2_CLOCK,
-    SCORE603E_85C30_2_CLOCK_X,
-    CONSOLE_DEFAULT_CONSOLE_CLOCK
-  },
-  {
-    SCORE603E_85C30_3_IRQ,
-    SCORE603E_85C30_3_CLOCK,
-    SCORE603E_85C30_3_CLOCK_X,
-    CONSOLE_DEFAULT_CONSOLE_CLOCK
-  },
-  {
-    SCORE603E_85C30_4_IRQ,
-    SCORE603E_85C30_4_CLOCK,
-    SCORE603E_85C30_4_CLOCK_X,
-    CONSOLE_DEFAULT_CONSOLE_CLOCK
-  },
-  {
-    SCORE603E_85C30_5_IRQ,
-    SCORE603E_85C30_5_CLOCK,
-    SCORE603E_85C30_5_CLOCK_X,
-    CONSOLE_DEFAULT_CONSOLE_CLOCK
-  },
-#endif
-
-};
-
-/*
- * Table of port unique information for each port.
- * See consolebsp.h for the Port_85C30_info structure defination.
- */
-const Port_85C30_info Ports_85C30 [ NUM_Z85C30_PORTS ] = {
-  {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_0,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_0,
-    0x00,
-    &Protocols_85c30[0],
-    &Chips_85C30[0],
-  },
-  {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_1,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_1,
-    0x01,
-    &Protocols_85c30[1],
-    &Chips_85C30[0],
-  },
-  {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_2,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_2,
-    0x02,
-    &Protocols_85c30[2],
-    &Chips_85C30[1],
-  },
-  {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_3,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_3,
-    0x03,
-    &Protocols_85c30[3],
-    &Chips_85C30[1],
- },
-
-#if (HAS_PMC_PSC8)
-  {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_4,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_4,
-    0x04,
-    &Protocols_85c30[4],
-    &Chips_85C30[2],
- },
- {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_5,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_5,
-    0x05,
-    &Protocols_85c30[5],
-    &Chips_85C30[2],
- },
- {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_6,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_6,
-    0x06,
-    &Protocols_85c30[6],
-    &Chips_85C30[3],
- },
- {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_7,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_7,
-    0x07,
-    &Protocols_85c30[7],
-    &Chips_85C30[3],
- },
- {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_8,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_8,
-    0x08,
-    &Protocols_85c30[8],
-    &Chips_85C30[4],
- },
- {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_9,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_9,
-    0x09,
-    &Protocols_85c30[9],
-    &Chips_85C30[4],
- },
- {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_10,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_10,
-    0x0a,
-    &Protocols_85c30[10],
-    &Chips_85C30[5],
- },
- {
-    (volatile unsigned char *) SCORE603E_85C30_CTRL_11,
-    (volatile unsigned char *) SCORE603E_85C30_DATA_11,
-    0x0b,
-    &Protocols_85c30[11],
-    &Chips_85C30[5],
- },
-#endif
-};
diff --git a/c/src/lib/libbsp/powerpc/score603e/include/bsp.h b/c/src/lib/libbsp/powerpc/score603e/include/bsp.h
deleted file mode 100644
index 0b6eb28..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/include/bsp.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- *  This include file contains all board IO definitions.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2014.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef LIBBSP_POWERPC_SCORE603E_BSP_H
-#define LIBBSP_POWERPC_SCORE603E_BSP_H
-
-#define BSP_ZERO_WORKSPACE_AUTOMATICALLY TRUE
-
-#include <bspopts.h>
-#include <bsp/default-initial-extension.h>
-#include <rtems.h>
-#include <rtems/console.h>
-#include <libcpu/io.h>
-#include <rtems/clockdrv.h>
-#include <bsp/vectors.h>
-
-#ifdef ASM
-/* Definition of where to store registers in alignment handler */
-#define ALIGN_REGS 0x0140
-
-#else
-#include <rtems.h>
-#include <rtems/console.h>
-#include <rtems/clockdrv.h>
-#include <rtems/iosupp.h>
-
-/*
- *  We no longer support the first generation board.
- */
-
-#include <gen2.h>
-#include <bsp/irq.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * The following macro calculates the Baud constant. For the Z8530 chip.
- *
- * Note: baud constant = ((clock frequency / Clock_X) / (2 * Baud Rate)) - 2
- *       for the Score603e ((10,000,000 / 16) / (2 * Baud Rate)) - 2
- */
-#define _Score603e_Z8530_Baud( _frequency, _clock_by, _baud_rate  )   \
-  ( (_frequency /( _clock_by * 2 * _baud_rate))  - 2)
-
-#define Score603e_Z8530_Chip1_Baud( _value ) \
-  _Score603e_Z8530_Baud( SCORE603E_85C30_1_CLOCK, \
-     SCORE603E_85C30_1_CLOCK_X, _value )
-
-#define Score603e_Z8530_Chip0_Baud( _value ) \
-  _Score603e_Z8530_Baud( SCORE603E_85C30_0_CLOCK, \
-     SCORE603E_85C30_0_CLOCK_X, _value )
-
-#define Initialize_Board_ctrl_register()                         \
-  *SCORE603E_BOARD_CTRL_REG = (*SCORE603E_BOARD_CTRL_REG |       \
-                               SCORE603E_BRD_FLASH_DISABLE_MASK)
-
-#define Processor_Synchronize() \
-  __asm__ volatile(" eieio ")
-
-
-/* Constants */
-
-/*
- *  Device Driver Table Entries
- */
-
-/*
- * NOTE: Use the standard Console driver entry
- */
-
-/*
- * NOTE: Use the standard Clock driver entry
- */
-
-/*
- *  Information placed in the linkcmds file.
- */
-
-extern int   RAM_START;
-extern int   RAM_END;
-extern int   RAM_SIZE;
-
-extern int   PROM_START;
-extern int   PROM_END;
-extern int   PROM_SIZE;
-
-extern int   CLOCK_SPEED;
-extern int   CPU_PPC_CLICKS_PER_MS;
-
-extern int   end;        /* last address in the program */
-
-/*
- * Total RAM available
- */
-extern int        end;        /* last address in the program */
-extern int        RAM_END;
-extern uint32_t   BSP_mem_size;
-
-
-/*
- * How many libio files we want
- */
-
-#define BSP_LIBIO_MAX_FDS       20
-
-/* functions */
-
-/*
- *
- */
-rtems_isr_entry  set_EE_vector(
-  rtems_isr_entry     handler,                  /* isr routine        */
-  rtems_vector_number vector                    /* vector number      */
-);
-void initialize_external_exception_vector(void);
-
-/*
- * Hwr_init.c
- */
-void init_PCI(void);
-void init_RTC(void);
-void instruction_cache_enable(void);
-void data_cache_enable(void);
-
-void     initialize_PCI_bridge(void);
-uint16_t read_and_clear_irq(void);
-void     set_irq_mask(uint16_t value);
-uint16_t get_irq_mask(void);
-
-/*
- * universe.c
- */
-void     initialize_universe(void);
-void     set_irq_mask(uint16_t value);
-uint16_t get_irq_mask(void);
-void     unmask_irq(uint16_t irq_idx);
-void     mask_irq(uint16_t irq_idx);
-void     init_irq_data_register(void);
-uint16_t read_and_clear_PMC_irq(uint16_t irq);
-bool     Is_PMC_IRQ( uint32_t pmc_irq, uint16_t status_word);
-uint16_t read_and_clear_irq(void);
-void set_vme_base_address(uint32_t base_address);
-uint32_t get_vme_slave_size(void);
-void set_vme_slave_size (uint32_t size);
-
-/*
- * FPGA.c
- */
-void initialize_PCI_bridge(void);
-void init_irq_data_register(void);
-uint32_t Read_pci_device_register(uint32_t address);
-void  Write_pci_device_register(uint32_t address, uint32_t data);
-
-/* flash.c */
-unsigned int SCORE603e_FLASH_Disable(uint32_t unused);
-unsigned int SCORE603e_FLASH_verify_enable(void);
-unsigned int SCORE603e_FLASH_Enable_writes(uint32_t area);
-
-/*
- * PCI.c
- */
-uint32_t PCI_bus_read(volatile uint32_t *_addr);
-void PCI_bus_write(volatile uint32_t *_addr, uint32_t _data);
-
-#define BSP_FLASH_ENABLE_WRITES( _area) SCORE603e_FLASH_Enable_writes( _area )
-#define BSP_FLASH_DISABLE_WRITES(_area) SCORE603e_FLASH_Disable( _area )
-
-#define Convert_Endian_32( _data ) \
-  ( ((_data&0x000000ff)<<24) | ((_data&0x0000ff00)<<8) |  \
-    ((_data&0x00ff0000)>>8)  | ((_data&0xff000000)>>24) )
-
-#define Convert_Endian_16( _data ) \
-  ( ((_data&0x00ff)<<8) | ((_data&0xff00)>>8) )
-
-/*
- *  Interfaces to required Clock Driver support methods
- */
-int BSP_disconnect_clock_handler(void);
-int BSP_connect_clock_handler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ASM */
-
-#endif
diff --git a/c/src/lib/libbsp/powerpc/score603e/include/gen2.h b/c/src/lib/libbsp/powerpc/score603e/include/gen2.h
deleted file mode 100644
index 8e79c33..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/include/gen2.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*  Gen2.h
- *
- *  This include file contains all Generation 2 board addreses
- *
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef __SCORE_GENERATION_2_h
-#define __SCORE_GENERATION_2_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <rtems.h>
-
-/*
- * ISA/PCI I/O space.
- */
-#define SCORE603E_VME_JUMPER_ADDR      0x00e20000
-#define BSP_FLASH_BASE                 0x04000000
-#define SCORE603E_ISA_PCI_IO_BASE      0x80000000
-#define SCORE603E_TIMER_PORT_C         0xfd000000
-#define SCORE603E_TIMER_INT_ACK        0xfd000000
-#define SCORE603E_TIMER_PORT_B         0xfd000008
-#define SCORE603E_TIMER_PORT_A         0xfd000004
-
-#define SCORE603E_BOARD_CTRL_REG       ((volatile uint8_t*)0xfd00002c)
-#define SCORE603E_BRD_FLASH_DISABLE_MASK     0x40
-
-#define SCORE603E_85C30_CTRL_0         ((volatile uint8_t*)0xfe200020)
-#define SCORE603E_85C30_DATA_0         ((volatile uint8_t*)0xfe200024)
-#define SCORE603E_85C30_CTRL_1         ((volatile uint8_t*)0xfe200028)
-#define SCORE603E_85C30_DATA_1         ((volatile uint8_t*)0xfe20002c)
-#define SCORE603E_85C30_CTRL_2         ((volatile uint8_t*)0xfe200000)
-#define SCORE603E_85C30_DATA_2         ((volatile uint8_t*)0xfe200004)
-#define SCORE603E_85C30_CTRL_3         ((volatile uint8_t*)0xfe200008)
-#define SCORE603E_85C30_DATA_3         ((volatile uint8_t*)0xfe20000c)
-
-/*
- * PSC8 - PMC Card
- */
-/* address of our ram on the PCI bus   */
-#define PCI_DRAM_OFFSET              PREP_PCI_DRAM_OFFSET
-#define BSP_PCI_CONFIGURATION_BASE   0x80800000
-#define BSP_PMC_BASE                 BSP_PCI_CONFIGURATION_BASE
-#define PCI_MEM_BASE_ADJUSTMENT      0
-#define BSP_PCI_PMC_DEVICE_BASE      0x80808000
-#define BSP_PCI_REGISTER_BASE        0xfc000000
-
-#define BSP_PCI_DEVICE_ADDRESS( _offset) \
-         ((volatile uint32_t *)( BSP_PCI_PMC_DEVICE_BASE + _offset ))
-
-
-#define BSP_PMC_SERIAL_ADDRESS( _offset )    \
-        ((volatile uint8_t*)(BSP_PCI_REGISTER_BASE + _offset))
-
-/*
- * PMC serial channels - (4-7: 232 and 8-11: 422)
- */
-#define SCORE603E_85C30_CTRL_4        BSP_PMC_SERIAL_ADDRESS(0x00200020)
-#define SCORE603E_85C30_DATA_4        BSP_PMC_SERIAL_ADDRESS(0x00200024)
-#define SCORE603E_85C30_CTRL_5        BSP_PMC_SERIAL_ADDRESS(0x00200028)
-#define SCORE603E_85C30_DATA_5        BSP_PMC_SERIAL_ADDRESS(0x0020002c)
-#define SCORE603E_85C30_CTRL_6        BSP_PMC_SERIAL_ADDRESS(0x00200030)
-#define SCORE603E_85C30_DATA_6        BSP_PMC_SERIAL_ADDRESS(0x00200034)
-#define SCORE603E_85C30_CTRL_7        BSP_PMC_SERIAL_ADDRESS(0x00200038)
-#define SCORE603E_85C30_DATA_7        BSP_PMC_SERIAL_ADDRESS(0x0020003c)
-#define SCORE603E_85C30_CTRL_8        BSP_PMC_SERIAL_ADDRESS(0x00200000)
-#define SCORE603E_85C30_DATA_8        BSP_PMC_SERIAL_ADDRESS(0x00200004)
-#define SCORE603E_85C30_CTRL_9        BSP_PMC_SERIAL_ADDRESS(0x00200008)
-#define SCORE603E_85C30_DATA_9        BSP_PMC_SERIAL_ADDRESS(0x0020000c)
-#define SCORE603E_85C30_CTRL_10       BSP_PMC_SERIAL_ADDRESS(0x00200010)
-#define SCORE603E_85C30_DATA_10       BSP_PMC_SERIAL_ADDRESS(0x00200014)
-#define SCORE603E_85C30_CTRL_11       BSP_PMC_SERIAL_ADDRESS(0x00200018)
-#define SCORE603E_85C30_DATA_11       BSP_PMC_SERIAL_ADDRESS(0x0020001c)
-
-#define	_IO_BASE		       PREP_ISA_IO_BASE
-#define SCORE603E_PCI_IO_CFG_ADDR      0x80000cf8
-#define SCORE603E_PCI_IO_CFG_DATA      0x80000cfc
-
-#define SCORE603E_UNIVERSE_BASE        0x80030000
-#define SCORE603E_IO_VME_UNIVERSE_BASE 0x80007000
-#define PCI_MEM_BASE                   0xc0000000
-#define BSP_PCI_MEM_BASE               PCI_MEM_BASE  /* XXX - May want to remove this later */
-#define BSP_NVRAM_BASE           0xfd100000
-#define BSP_RTC_ADDRESS          ((volatile unsigned char *)0xfd180000)
-#define SCORE603E_JP1_JP2_PROM_BASE    0xfff00000
-#define SCORE603E_NOT_JP1_2_FLASH_BASE 0xff800000
-
-#if (SCORE603E_USE_SDS) | (SCORE603E_USE_OPEN_FIRMWARE) | (SCORE603E_USE_NONE)
-#define SCORE603E_VME_A16_OFFSET       0x04000000
-#elif (SCORE603E_USE_DINK)
-#define SCORE603E_VME_A16_OFFSET       0x11000000
-#define SCORE603E_VME_A24_OFFSET       0x10000000
-#define BSP_VME_A24_BASE               (BSP_PCI_MEM_BASE+SCORE603E_VME_A24_OFFSET)
-#else
-#error "SCORE603E gen2.h -- what ROM monitor are you using"
-#endif
-
-#define BSP_VME_A16_BASE         (BSP_PCI_MEM_BASE+SCORE603E_VME_A16_OFFSET)
-
-/*
- *  Definations for the ICM 1770 RTC chip
- */
-    /*
-     * These values are programed into a register and must not be changed.
-     */
-#define ICM1770_CRYSTAL_FREQ_32K      0x00
-#define ICM1770_CRYSTAL_FREQ_1M       0x01
-#define ICM1770_CRYSTAL_FREQ_2M       0x02
-#define ICM1770_CRYSTAL_FREQ_4M       0x03
-
-#define BSP_RTC_FREQUENCY           ICM1770_CRYSTAL_FREQ_32K
-
-/*
- *  Z85C30 Definations for the 423 interface.
- */
-#define SCORE603E_85C30_0_CLOCK     14745600  /* 10,000,000 ?10->14.5 */
-#define SCORE603E_85C30_0_CLOCK_X       16
-
-/*
- *  Z85C30 Definations for the 422 interface.
- */
-#define SCORE603E_85C30_1_CLOCK     16000000  /* 10,000,000 ?10->14.5 */
-#define SCORE603E_85C30_1_CLOCK_X       16
-
-/*
- *  Z85C30 Definations for the PMC serial chips
- */
-#define SCORE603E_85C30_PMC_CLOCK     16000000  /* 10,000,000 ?10->14.5 */
-#define SCORE603E_85C30_PMC_CLOCK_X       16
-
-#define SCORE603E_85C30_2_CLOCK       SCORE603E_85C30_PMC_CLOCK
-#define SCORE603E_85C30_3_CLOCK       SCORE603E_85C30_PMC_CLOCK
-#define SCORE603E_85C30_4_CLOCK       SCORE603E_85C30_PMC_CLOCK
-#define SCORE603E_85C30_5_CLOCK       SCORE603E_85C30_PMC_CLOCK
-#define SCORE603E_85C30_2_CLOCK_X     SCORE603E_85C30_PMC_CLOCK_X
-#define SCORE603E_85C30_3_CLOCK_X     SCORE603E_85C30_PMC_CLOCK_X
-#define SCORE603E_85C30_4_CLOCK_X     SCORE603E_85C30_PMC_CLOCK_X
-#define SCORE603E_85C30_5_CLOCK_X     SCORE603E_85C30_PMC_CLOCK_X
-
-#define SCORE603E_UNIVERSE_CHIP_ID     0x000010E3
-
-/*
- * FPGA Interupt Address Definations.
- */
-#define SCORE603E_FPGA_VECT_DATA    ((volatile uint16_t*)0xfd000040)
-#define SCORE603E_FPGA_BIT1_15_0    ((volatile uint16_t*)0xfd000044)
-#define SCORE603E_FPGA_MASK_DATA    ((volatile uint16_t*)0xfd000048)
-#define SCORE603E_FPGA_IRQ_INPUT    ((volatile uint16_t*)0xfd00004c)
-
-/*
- * The PMC status word is at the PMC base address
- */
-#define BSP_PMC_STATUS_ADDRESS  (BSP_PMC_SERIAL_ADDRESS (0))
-#define Is_PMC_85C30_4_IRQ( _status ) (_status & 0x80)    /* SCC 422-1 */
-#define Is_PMC_85C30_2_IRQ( _status ) (_status & 0x40)    /* SCC 232-1 */
-#define Is_PMC_85C30_5_IRQ( _status ) (_status & 0x20)    /* SCC 422-2 */
-#define Is_PMC_85C30_3_IRQ( _status ) (_status & 0x08)    /* SCC 232-2 */
-
-#define SCORE603E_PMC_CONTROL_ADDRESS    BSP_PMC_SERIAL_ADDRESS(0x100000)
-#define SCORE603E_PMC_SCC_232_LOOPBACK (_word) (_word|0x20)
-
-#define PMC_SET_232_LOOPBACK(_word)   (_word | 0x02)
-#define PMC_CLEAR_232_LOOPBACK(_word) (_word & 0xfd)
-#define PMC_SET_422_LOOPBACK(_word)   (_word | 0x01)
-#define PMC_CLEAR_422_LOOPBACK(_word) (_word & 0xfe)
-
-/*
- *  Score603e Interupt Definations.
- */
-
-
-/*
- *  BSP_TIMER_AVG_OVERHEAD and BSP_TIMER_LEAST_VALID for the shared timer
- *  driver.
- */
-
-#define BSP_TIMER_AVG_OVERHEAD   4  /* It typically takes xx clicks        */
-                                    /*     to start/stop the timer.        */
-#define BSP_TIMER_LEAST_VALID    1  /* Don't trust a value lower than this */
-
-/*
- *  Convert decrement value to tenths of microsecnds (used by
- *  shared timer driver).
- *
- *    + CPU has a 66.67 Mhz bus,
- *    + There are 4 bus cycles per click
- *    + We return value in 1/10 microsecond units.
- *   Modified following equation to integer equation to remove
- *   floating point math.
- *   (int) ((float)(_value) / ((66.67 * 0.1) / 4.0))
- */
-
-#define BSP_Convert_decrementer( _value ) \
-  (int) (((_value) * 4000) / 6667)
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
diff --git a/c/src/lib/libbsp/powerpc/score603e/include/tm27.h b/c/src/lib/libbsp/powerpc/score603e/include/tm27.h
deleted file mode 100644
index 0ee290c..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/include/tm27.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * @file
- * @ingroup powerpc_score603e
- * @brief Implementations for interrupt mechanisms for Time Test 27
- */
-
-/*
- *  COPYRIGHT (c) 1989-2014.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _RTEMS_TMTEST27
-#error "This is an RTEMS internal file you must not include directly."
-#endif
-
-#ifndef __tm27_h
-#define __tm27_h
-
-#include <bsp/irq.h>
-
-/*
- *  Stuff for Time Test 27
- */
-
-#define MUST_WAIT_FOR_INTERRUPT 1
-
-void nullFunc() {}
-
-static rtems_irq_connect_data clockIrqData = {BSP_DECREMENTER,
-                                              0,
-                                              (rtems_irq_enable)nullFunc,
-                                              (rtems_irq_disable)nullFunc,
-                                              (rtems_irq_is_enabled) nullFunc};
-void Install_tm27_vector(void (*_handler)())
-{
-  clockIrqData.hdl = _handler;
-  if (!BSP_install_rtems_irq_handler (&clockIrqData)) {
-        printk("Error installing clock interrupt handler!\n");
-        rtems_fatal_error_occurred(1);
-  }
-}
-
-#define Cause_tm27_intr()  \
-  do { \
-    uint32_t   _clicks = 8; \
-    __asm__ volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \
-  } while (0)
-
-#define Clear_tm27_intr() \
-  do { \
-    uint32_t   _clicks = 0xffffffff; \
-    __asm__ volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \
-  } while (0)
-
-#define Lower_tm27_intr() \
-  do { \
-    uint32_t   _msr = 0; \
-    _ISR_Set_level( 0 ); \
-    __asm__ volatile( "mfmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \
-    _msr |=  0x8002; \
-    __asm__ volatile( "mtmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \
-  } while (0)
-
-#endif
diff --git a/c/src/lib/libbsp/powerpc/score603e/irq/FPGA.c b/c/src/lib/libbsp/powerpc/score603e/irq/FPGA.c
deleted file mode 100644
index 9c08d1d..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/irq/FPGA.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * FPGA.c -- Bridge for second and subsequent generations
- */
-
-/*
- *  COPYRIGHT (c) 1989-2014.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <bsp/irq.h>
-#include <string.h>
-#include <fcntl.h>
-#include <assert.h>
-
-#include <rtems/libio.h>
-#include <rtems/libcsupport.h>
-#include <rtems/bspIo.h>
-
-/*
- *  initialize FPGA
- */
-void initialize_PCI_bridge (void)
-{
-  /* Note: Accept DINKs setup of the PCI Bridge and don't
-   *       change anything.
-   */
-}
-
-void set_irq_mask(
-  uint16_t         value
-)
-{
-  volatile uint16_t   *loc;
-
-  loc = (uint16_t*)SCORE603E_FPGA_MASK_DATA;
-
-  *loc = value;
-}
-
-uint16_t get_irq_mask( void )
-{
-  volatile uint16_t  *loc;
-  uint16_t            value;
-
-  loc =  (uint16_t*)SCORE603E_FPGA_MASK_DATA;
-
-  value = *loc;
-
-  return value;
-}
-
-void mask_irq(
-  uint16_t         irq_idx
-)
-{
-  uint16_t         value;
-  uint32_t         mask_idx = irq_idx;
-
-  value = get_irq_mask();
-
-#if (HAS_PMC_PSC8)
-  switch (irq_idx + Score_IRQ_First ) {
-    case SCORE603E_85C30_4_IRQ:
-    case SCORE603E_85C30_2_IRQ:
-    case SCORE603E_85C30_5_IRQ:
-    case SCORE603E_85C30_3_IRQ:
-      mask_idx = SCORE603E_PCI_IRQ_0 - Score_IRQ_First;
-      break;
-    default:
-      break;
-  }
-#endif
-
-  value |= (0x1 << mask_idx);
-  set_irq_mask( value );
-}
-
-void unmask_irq(
-  uint16_t         irq_idx
-)
-{
-  uint16_t         value;
-  uint32_t         mask_idx = irq_idx;
-
-  value = get_irq_mask();
-
-#if (HAS_PMC_PSC8)
-  switch (irq_idx + Score_IRQ_First ) {
-    case SCORE603E_85C30_4_IRQ:
-    case SCORE603E_85C30_2_IRQ:
-    case SCORE603E_85C30_5_IRQ:
-    case SCORE603E_85C30_3_IRQ:
-      mask_idx = SCORE603E_PCI_IRQ_0 - Score_IRQ_First;
-      break;
-    default:
-      break;
-  }
-#endif
-
-  value &= (~(0x1 << mask_idx));
-  set_irq_mask( value );
-}
-
-void init_irq_data_register(void)
-{
-  uint32_t         index;
-  uint32_t         i;
-
-  set_irq_mask( 0xffff );
-
-  /*
-   * Clear any existing interupts from the vector data register.
-   */
-  for (i=0; i<20; i++) {
-    index =  (*SCORE603E_FPGA_VECT_DATA);
-    if ( (index&0x10) != 0x10 )
-      break;
-  }
-}
-
-uint16_t read_and_clear_PMC_irq(
-  uint16_t            irq
-)
-{
-  uint16_t   status_word = irq;
-
-  status_word = (*BSP_PMC_STATUS_ADDRESS);
-
-  return status_word;
-}
-
-bool Is_PMC_IRQ(
-  uint32_t           pmc_irq,
-  uint16_t           status_word
-)
-{
-  bool result = false;
-
-  switch(pmc_irq) {
-    case SCORE603E_85C30_4_IRQ:
-      result = Is_PMC_85C30_4_IRQ( status_word ) ? true : false;
-      break;
-    case SCORE603E_85C30_2_IRQ:
-      result = Is_PMC_85C30_2_IRQ( status_word ) ? true : false;
-      break;
-    case SCORE603E_85C30_5_IRQ:
-      result = Is_PMC_85C30_5_IRQ( status_word ) ? true : false;
-      break;
-    case SCORE603E_85C30_3_IRQ:
-      result = Is_PMC_85C30_3_IRQ( status_word ) ? true : false;
-      break;
-    default:
-      assert( 0 );
-      break;
-  }
-
-  return result;
-}
-
-uint16_t         read_and_clear_irq(void)
-{
-  uint16_t            irq;
-
-
-  irq = (*SCORE603E_FPGA_VECT_DATA);
-  Processor_Synchronize();
-  if ((irq & 0xffff0) != 0x10) {
-    printk( "read_and_clear_irq:: ERROR==>no irq data 0x%x\n", irq);
-    return (irq | 0x80);
-  }
-
-  irq &=0xf;
-  irq += Score_IRQ_First;
-  return irq;
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/irq/irq.c b/c/src/lib/libbsp/powerpc/score603e/irq/irq.c
deleted file mode 100644
index 431d0a9..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/irq/irq.c
+++ /dev/null
@@ -1,495 +0,0 @@
-/*
- *  This file contains the implementation of the function described in irq.h
- *
- *  Copyright (C) 1998, 1999 valette at crf.canon.fr
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <stdlib.h>
-
-#include <bsp.h>
-#include <bsp/irq.h>
-#include <bsp/VME.h>
-#include <rtems/score/apiext.h>  /* for post ISR signal processing */
-#include <libcpu/io.h>
-#include <bsp/vectors.h>
-#include <stdlib.h>
-#include <rtems/bspIo.h> /* for printk */
-
-/*
- * default handler connected on each irq after bsp initialization
- */
-static rtems_irq_connect_data	default_rtems_entry;
-
-/*
- * location used to store initial tables used for interrupt
- * management.
- */
-static rtems_irq_global_settings* 	internal_config;
-static rtems_irq_connect_data*		rtems_hdl_tbl;
-
-/*
- * Check if IRQ is an ISA IRQ
- */
-static inline int is_isa_irq(const rtems_irq_number irqLine)
-{
-  return (((int) irqLine <= BSP_ISA_IRQ_MAX_OFFSET) &
-	  ((int) irqLine >= BSP_ISA_IRQ_LOWEST_OFFSET)
-	 );
-}
-
-/*
- * Check if IRQ is an pci IRQ
- */
-static inline int is_pci_irq(const rtems_irq_number irqLine)
-{
-  return (((int) irqLine <= BSP_PCI_IRQ_MAX_OFFSET) &
-	  ((int) irqLine >= BSP_PCI_IRQ_LOWEST_OFFSET)
-	 );
-}
-
-/*
- * Check if IRQ is a Processor IRQ
- */
-static inline int is_processor_irq(const rtems_irq_number irqLine)
-{
-  return (((int) irqLine <= BSP_PROCESSOR_IRQ_MAX_OFFSET) &
-	  ((int) irqLine >= BSP_PROCESSOR_IRQ_LOWEST_OFFSET)
-	 );
-}
-
-/*
- * ------------------------ RTEMS Irq helper functions ----------------
- */
-
-/*
- * This function check that the value given for the irq line
- * is valid.
- */
-
-static int isValidInterrupt(int irq)
-{
-  if ( (irq < BSP_LOWEST_OFFSET) || (irq > BSP_MAX_OFFSET))
-    return 0;
-  return 1;
-}
-
-/*
- * ------------------------ RTEMS Shared Irq Handler Mngt Routines ----------------
- */
-int BSP_install_rtems_shared_irq_handler  (const rtems_irq_connect_data* irq)
-{
-    rtems_interrupt_level   level;
-    rtems_irq_connect_data* vchain;
-
-printk(" BSP_install_rtems_shared_irq_handler %d\n", irq->name );
-
-    if (!isValidInterrupt(irq->name)) {
-      printk("Invalid interrupt vector %d\n",irq->name);
-      return 0;
-    }
-
-    rtems_interrupt_disable(level);
-
-    if ( (int)rtems_hdl_tbl[irq->name].next_handler  == -1 ) {
-      rtems_interrupt_enable(level);
-      printk("IRQ vector %d already connected to an unshared handler\n",irq->name);
-      return 0;
-    }
-
-     vchain = (rtems_irq_connect_data*)malloc(sizeof(rtems_irq_connect_data));
-
-    /* save off topmost handler */
-    vchain[0]= rtems_hdl_tbl[irq->name];
-
-    /*
-     * store the data provided by user
-     */
-    rtems_hdl_tbl[irq->name] = *irq;
-
-    /* link chain to new topmost handler */
-    rtems_hdl_tbl[irq->name].next_handler = (void *)vchain;
-
-    /*
-     * XXX FIX ME
-     */
-    if (is_pci_irq(irq->name)) {
-    }
-
-    if (is_processor_irq(irq->name)) {
-      /*
-       * Enable exception at processor level
-       */
-    }
-    /*
-     * Enable interrupt on device
-     */
-	if (irq->on)
-    	irq->on(irq);
-
-    rtems_interrupt_enable(level);
-
-    return 1;
-}
-
-/*
- * This function disables a given XXX interrupt
- */
-rtems_status_code bsp_interrupt_vector_disable( rtems_vector_number irqLine)
-{
-  /* XXX FIX ME!!!! */
-
-  printk("bsp_interrupt_vector_disable: 0x%x\n", irqLine );
-  return RTEMS_SUCCESSFUL;
-}
-
-rtems_status_code bsp_interrupt_vector_enable( rtems_vector_number irqLine)
-{
-  /* XXX FIX ME!!!! */
-  printk("bsp_interrupt_vector_enable: 0x%x\n", irqLine );
-
-  return RTEMS_SUCCESSFUL;
-}
-
-
-
-/*
- * ------------------------ RTEMS Single Irq Handler Mngt Routines ----------------
- */
-
-int BSP_install_rtems_irq_handler  (const rtems_irq_connect_data* irq)
-{
-    rtems_interrupt_level       level;
-
-printk(" BSP_install_rtems_irq_handler %d\n", irq->name );
-
-    if (!isValidInterrupt(irq->name)) {
-      printk("Invalid interrupt vector %d\n",irq->name);
-      return 0;
-    }
-    /*
-     * Check if default handler is actually connected. If not issue an error.
-     * You must first get the current handler via i386_get_current_idt_entry
-     * and then disconnect it using i386_delete_idt_entry.
-     * RATIONALE : to always have the same transition by forcing the user
-     * to get the previous handler before accepting to disconnect.
-     */
-    rtems_interrupt_disable(level);
-    if (rtems_hdl_tbl[irq->name].hdl != default_rtems_entry.hdl) {
-      rtems_interrupt_enable(level);
-      printk("IRQ vector %d already connected\n",irq->name);
-      return 0;
-    }
-
-    /*
-     * store the data provided by user
-     */
-    rtems_hdl_tbl[irq->name] = *irq;
-    rtems_hdl_tbl[irq->name].next_handler = (void *)-1;
-
-    /* XXX -FIX ME !! */
-    if (is_pci_irq(irq->name)) {
-      /*
-       * Enable interrupt
-       */
-      printk("is_pci_irq = TRUE - FIX THIS!\n");
-    }
-
-    if (is_processor_irq(irq->name)) {
-      /*
-       * Enable exception at processor level
-       */
-      printk("is_processor_irq = TRUE : Fix This\n");
-    }
-
-    /*
-     * Enable interrupt on device
-     */
-    if (irq->on) {
-        printk("Call 0x%x\n", irq->on );
-    	irq->on(irq);
-    }
-
-    rtems_interrupt_enable(level);
-
-    return 1;
-}
-
-int BSP_get_current_rtems_irq_handler	(rtems_irq_connect_data* irq)
-{
-    rtems_interrupt_level       level;
-
-printk(" BSP_get_current_rtems_irq_handler %d\n", irq->name );
-    if (!isValidInterrupt(irq->name)) {
-      return 0;
-    }
-    rtems_interrupt_disable(level);
-      *irq = rtems_hdl_tbl[irq->name];
-    rtems_interrupt_enable(level);
-    return 1;
-}
-
-int BSP_remove_rtems_irq_handler  (const rtems_irq_connect_data* irq)
-{
-    rtems_irq_connect_data *pchain= NULL, *vchain = NULL;
-    rtems_interrupt_level       level;
-
-printk(" BSP_remove_rtems_irq_handler %d\n", irq->name );
-    if (!isValidInterrupt(irq->name)) {
-      return 0;
-    }
-    /*
-     * Check if default handler is actually connected. If not issue an error.
-     * You must first get the current handler via i386_get_current_idt_entry
-     * and then disconnect it using i386_delete_idt_entry.
-     * RATIONALE : to always have the same transition by forcing the user
-     * to get the previous handler before accepting to disconnect.
-     */
-    rtems_interrupt_disable(level);
-    if (rtems_hdl_tbl[irq->name].hdl != irq->hdl) {
-      rtems_interrupt_enable(level);
-      return 0;
-    }
-
-    if( (int)rtems_hdl_tbl[irq->name].next_handler != -1 )
-    {
-       int found = 0;
-
-       for( (pchain= NULL, vchain = &rtems_hdl_tbl[irq->name]);
-            (vchain->hdl != default_rtems_entry.hdl);
-            (pchain= vchain, vchain = (rtems_irq_connect_data*)vchain->next_handler) )
-       {
-          if( vchain->hdl == irq->hdl )
-          {
-             found= -1; break;
-          }
-       }
-
-       if( !found )
-       {
-          rtems_interrupt_enable(level);
-          return 0;
-       }
-    }
-    else
-    {
-       if (rtems_hdl_tbl[irq->name].hdl != irq->hdl)
-       {
-          rtems_interrupt_enable(level);
-         return 0;
-       }
-    }
-
-    /* XXX - FIX ME !! */
-    if (is_pci_irq(irq->name)) {
-      /*
-       * disable interrupt
-       */
-    }
-    if (is_processor_irq(irq->name)) {
-      /*
-       * disable exception at processor level
-       */
-    }
-
-    /*
-     * Disable interrupt on device
-     */
-	if (irq->off)
-    	irq->off(irq);
-
-    /*
-     * restore the default irq value
-     */
-    if( !vchain )
-    {
-       /* single handler vector... */
-       rtems_hdl_tbl[irq->name] = default_rtems_entry;
-    }
-    else
-    {
-       if( pchain )
-       {
-          /* non-first handler being removed */
-          pchain->next_handler = vchain->next_handler;
-       }
-       else
-       {
-          /* first handler isn't malloc'ed, so just overwrite it.  Since
-          the contents of vchain are being struct copied, vchain itself
-          goes away */
-          rtems_hdl_tbl[irq->name]= *vchain;
-       }
-       free(vchain);
-    }
-
-    rtems_interrupt_enable(level);
-
-    return 1;
-}
-
-/*
- * RTEMS Global Interrupt Handler Management Routines
- */
-
-int BSP_rtems_irq_mngt_set(rtems_irq_global_settings* config)
-{
-    int                    i;
-    rtems_interrupt_level  level;
-
-    /*
-     * Store various code accelerators
-     */
-    internal_config 		= config;
-    default_rtems_entry 	= config->defaultEntry;
-    rtems_hdl_tbl 		= config->irqHdlTbl;
-
-printk(" BSP_rtems_irq_mngt_set\n");
-
-    rtems_interrupt_disable(level);
-    /*
-     * set up internal tables used by rtems interrupt prologue
-     */
-
-    /*
-     *  XXX - FIX ME !!!
-     */
-    for (i=BSP_PCI_IRQ_LOWEST_OFFSET; i < BSP_PCI_IRQ_LOWEST_OFFSET + BSP_PCI_IRQ_NUMBER ; i++) {
-      if (rtems_hdl_tbl[i].hdl != default_rtems_entry.hdl) {
-         {
-            rtems_irq_connect_data* vchain;
-            for( vchain = &rtems_hdl_tbl[i];
-                 ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl);
-                 vchain = (rtems_irq_connect_data*)vchain->next_handler )
-            {
-			  if (vchain->on)
-               	vchain->on(vchain);
-            }
-         }
-
-      }
-      else {
-         /* if (rtems_hdl_tbl[i].off) rtems_hdl_tbl[i].off(&rtems_hdl_tbl[i]); */
-         {
-            rtems_irq_connect_data* vchain;
-            for( vchain = &rtems_hdl_tbl[i];
-                 ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl);
-                 vchain = (rtems_irq_connect_data*)vchain->next_handler )
-            {
-			  if (vchain->off)
-               vchain->off(vchain);
-            }
-         }
-      }
-    }
-    /*
-     * finish with Processor exceptions handled like IRQ
-     */
-    for (i=BSP_PROCESSOR_IRQ_LOWEST_OFFSET; i < BSP_PROCESSOR_IRQ_LOWEST_OFFSET+BSP_PROCESSOR_IRQ_NUMBER; i++){
-      if (rtems_hdl_tbl[i].hdl != default_rtems_entry.hdl) {
-         {
-            rtems_irq_connect_data* vchain;
-            for( vchain = &rtems_hdl_tbl[i];
-                 ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl);
-                 vchain = (rtems_irq_connect_data*)vchain->next_handler )
-            {
-			  if (vchain->on)
-               vchain->on(vchain);
-            }
-         }
-
-      }
-      else {
-         {
-            rtems_irq_connect_data* vchain;
-            for( vchain = &rtems_hdl_tbl[i];
-                 ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl);
-                 vchain = (rtems_irq_connect_data*)vchain->next_handler )
-            {
-			  if (vchain->off)
-               vchain->off(vchain);
-            }
-         }
-
-      }
-    }
-    rtems_interrupt_enable(level);
-    return 1;
-}
-
-int BSP_rtems_irq_mngt_get(rtems_irq_global_settings** config)
-{
-    *config = internal_config;
-    return 0;
-}
-
-unsigned BSP_spuriousIntr = 0;
-
-/*
- * High level IRQ handler called from shared_raw_irq_code_entry
- */
-int C_dispatch_irq_handler (CPU_Interrupt_frame *frame, unsigned int excNum)
-{
-  register unsigned int irq;
-  register unsigned msr;
-  register unsigned new_msr;
-
-  if (excNum == ASM_DEC_VECTOR) {
-    _CPU_MSR_GET(msr);
-    new_msr = msr | MSR_EE;
-    _CPU_MSR_SET(new_msr);
-
-    rtems_hdl_tbl[BSP_DECREMENTER].hdl(rtems_hdl_tbl[BSP_DECREMENTER].handle);
-
-    _CPU_MSR_SET(msr);
-    return 0;
-
-  }
-
-  irq = read_and_clear_irq();
-  _CPU_MSR_GET(msr);
-  new_msr = msr | MSR_EE;
-  _CPU_MSR_SET(new_msr);
-
-  /* rtems_hdl_tbl[irq].hdl(rtems_hdl_tbl[irq].handle); */
-  {
-     rtems_irq_connect_data* vchain;
-     for( vchain = &rtems_hdl_tbl[irq];
-          ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl);
-          vchain = (rtems_irq_connect_data*)vchain->next_handler )
-     {
-        vchain->hdl(vchain->handle);
-     }
-  }
-
-  _CPU_MSR_SET(msr);
-
-  return 0;
-}
-
-rtems_status_code bsp_interrupt_facility_initialize(void)
-{
-  /* Install exception handler */
-  if (ppc_exc_set_handler( ASM_EXT_VECTOR, C_dispatch_irq_handler)) {
-    return RTEMS_IO_ERROR;
-  }
-  if (ppc_exc_set_handler( ASM_DEC_VECTOR, C_dispatch_irq_handler)) {
-    return RTEMS_IO_ERROR;
-  }
-  if (ppc_exc_set_handler( ASM_E300_SYSMGMT_VECTOR, C_dispatch_irq_handler)) {
-    return RTEMS_IO_ERROR;
-  }
-
-  return RTEMS_SUCCESSFUL;
-}
-
-void bsp_interrupt_handler_default( rtems_vector_number vector )
-{
-  if (vector != BSP_DECREMENTER) {
-    printk( "Spurious interrupt: 0x%08x\n", vector);
-  }
-}
-
diff --git a/c/src/lib/libbsp/powerpc/score603e/irq/irq.h b/c/src/lib/libbsp/powerpc/score603e/irq/irq.h
deleted file mode 100644
index 97977a7..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/irq/irq.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* irq.h
- *
- *  This include file describe the data structure and the functions implemented
- *  by RTEMS to write interrupt handlers.
- *
- *  This code is heavilly inspired by the public specification of STREAM V2
- *  that can be found at :
- *
- *  <http://www.chorus.com/Documentation/index.html> by following
- *  the STREAM API Specification Document link.
- *
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef BSP_POWERPC_IRQ_H
-#define BSP_POWERPC_IRQ_H
-
-#define BSP_SHARED_HANDLER_SUPPORT      1
-#include <rtems/irq.h>
-
-#ifndef ASM
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/*
- * rtems_irq_number Definitions
- */
-
-/*
- * ISA IRQ handler related definitions
- */
-#define BSP_ISA_IRQ_NUMBER		(16)
-#define BSP_ISA_IRQ_LOWEST_OFFSET	(0)
-#define BSP_ISA_IRQ_MAX_OFFSET		(BSP_ISA_IRQ_LOWEST_OFFSET + BSP_ISA_IRQ_NUMBER - 1)
-
-/*
- * PCI IRQ handlers related definitions
- */
-#define BSP_PCI_IRQ_NUMBER		(16)
-#define BSP_PCI_IRQ_LOWEST_OFFSET	(BSP_ISA_IRQ_NUMBER)
-#define BSP_PCI_IRQ_MAX_OFFSET		(BSP_PCI_IRQ_LOWEST_OFFSET + BSP_PCI_IRQ_NUMBER - 1)
-
-/*
- * PMC IRQ
- */
-#define BSP_PMC_IRQ_NUMBER              (4)
-#define BSP_PMC_IRQ_LOWEST_OFFSET	(BSP_PCI_IRQ_MAX_OFFSET + 1)
-#define BSP_PMC_IRQ_MAX_OFFSET		(BSP_PMC_IRQ_LOWEST_OFFSET + BSP_PMC_IRQ_NUMBER - 1)
-
-
-/*
- * PowerPC exceptions handled as interrupt where an RTEMS managed interrupt
- * handler might be connected
- */
-#define BSP_PROCESSOR_IRQ_NUMBER	(1)
-#define BSP_PROCESSOR_IRQ_LOWEST_OFFSET (BSP_PMC_IRQ_MAX_OFFSET + 1)
-#define BSP_PROCESSOR_IRQ_MAX_OFFSET	(BSP_PROCESSOR_IRQ_LOWEST_OFFSET + BSP_PROCESSOR_IRQ_NUMBER - 1)
-
-/* Misc vectors for OPENPIC irqs (IPI, timers)
- */
-#define BSP_MISC_IRQ_NUMBER		(8)
-#define BSP_MISC_IRQ_LOWEST_OFFSET	(BSP_PROCESSOR_IRQ_MAX_OFFSET + 1)
-#define BSP_MISC_IRQ_MAX_OFFSET		(BSP_MISC_IRQ_LOWEST_OFFSET + BSP_MISC_IRQ_NUMBER - 1)
-/*
- * Summary
- */
-#define BSP_IRQ_NUMBER			(BSP_MISC_IRQ_MAX_OFFSET + 1)
-#define BSP_LOWEST_OFFSET		(BSP_ISA_IRQ_LOWEST_OFFSET)
-#define BSP_MAX_OFFSET			(BSP_MISC_IRQ_MAX_OFFSET)
-
-/*
- * Some Processor execption handled as RTEMS IRQ symbolic name definition
- */
-#define BSP_DECREMENTER			(BSP_PROCESSOR_IRQ_LOWEST_OFFSET)
-
-/*
- * First Score Unique IRQ
- */
-#define Score_IRQ_First ( BSP_PCI_IRQ_LOWEST_OFFSET )
-
-/*
- * The Following Are part of a Score603e FPGA.
- */
-#define SCORE603E_IRQ00   ( Score_IRQ_First +  0 )
-#define SCORE603E_IRQ01   ( Score_IRQ_First +  1 )
-#define SCORE603E_IRQ02   ( Score_IRQ_First +  2 )
-#define SCORE603E_IRQ03   ( Score_IRQ_First +  3 )
-#define SCORE603E_IRQ04   ( Score_IRQ_First +  4 )
-#define SCORE603E_IRQ05   ( Score_IRQ_First +  5 )
-#define SCORE603E_IRQ06   ( Score_IRQ_First +  6 )
-#define SCORE603E_IRQ07   ( Score_IRQ_First +  7 )
-#define SCORE603E_IRQ08   ( Score_IRQ_First +  8 )
-#define SCORE603E_IRQ09   ( Score_IRQ_First +  9 )
-#define SCORE603E_IRQ10   ( Score_IRQ_First + 10 )
-#define SCORE603E_IRQ11   ( Score_IRQ_First + 11 )
-#define SCORE603E_IRQ12   ( Score_IRQ_First + 12 )
-#define SCORE603E_IRQ13   ( Score_IRQ_First + 13 )
-#define SCORE603E_IRQ14   ( Score_IRQ_First + 14 )
-#define SCORE603E_IRQ15   ( Score_IRQ_First + 15 )
-
-#define SCORE603E_TIMER1_IRQ           SCORE603E_IRQ00
-#define SCORE603E_TIMER2_IRQ           SCORE603E_IRQ01
-#define SCORE603E_TIMER3_IRQ           SCORE603E_IRQ02
-#define SCORE603E_85C30_1_IRQ          SCORE603E_IRQ03
-#define SCORE603E_85C30_0_IRQ          SCORE603E_IRQ04
-#define SCORE603E_RTC_IRQ              SCORE603E_IRQ05
-#define SCORE603E_PCI_IRQ_0            SCORE603E_IRQ06
-#define SCORE603E_PCI_IRQ_1            SCORE603E_IRQ07
-#define SCORE603E_PCI_IRQ_2            SCORE603E_IRQ08
-#define SCORE603E_PCI_IRQ_3            SCORE603E_IRQ09
-#define SCORE603E_UNIVERSE_IRQ         SCORE603E_IRQ10
-#define SCORE603E_1553_IRQ             SCORE603E_IRQ11
-#define SCORE603E_MAIL_BOX_IRQ_0       SCORE603E_IRQ12
-#define SCORE603E_MAIL_BOX_IRQ_1       SCORE603E_IRQ13
-#define SCORE603E_MAIL_BOX_IRQ_2       SCORE603E_IRQ14
-#define SCORE603E_MAIL_BOX_IRQ_3       SCORE603E_IRQ15
-
-/*
- * The Score FPGA maps all interrupts comming from the PMC card to
- * the FPGA interrupt SCORE603E_PCI_IRQ_0 the PMC status word must be
- * read to indicate which interrupt was chained to the FPGA.
- */
-#define SCORE603E_IRQ16   ( Score_IRQ_First + 16 )
-#define SCORE603E_IRQ17   ( Score_IRQ_First + 17 )
-#define SCORE603E_IRQ18   ( Score_IRQ_First + 18 )
-#define SCORE603E_IRQ19   ( Score_IRQ_First + 19 )
-
-/*
- * IRQ'a read from the PMC card
- */
-#define SCORE603E_85C30_4_IRQ          SCORE603E_IRQ16    /* SCC 422-1 */
-#define SCORE603E_85C30_2_IRQ          SCORE603E_IRQ17    /* SCC 232-1 */
-#define SCORE603E_85C30_5_IRQ          SCORE603E_IRQ18    /* SCC 422-2 */
-#define SCORE603E_85C30_3_IRQ          SCORE603E_IRQ19    /* SCC 232-2 */
-
-#define MAX_BOARD_IRQS                 SCORE603E_IRQ19
-
-extern void BSP_rtems_irq_mng_init(unsigned cpuId);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-#endif
diff --git a/c/src/lib/libbsp/powerpc/score603e/irq/irq_init.c b/c/src/lib/libbsp/powerpc/score603e/irq/irq_init.c
deleted file mode 100644
index 25128ad..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/irq/irq_init.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* irq_init.c
- *
- *  This file contains the implementation of rtems initialization
- *  related to interrupt handling.
- *
- *  CopyRight (C) 1999 valette at crf.canon.fr
- *
- * Enhanced by Jay Kulpinski <jskulpin at eng01.gdds.com>
- * to make it valid for MVME2300 Motorola boards.
- *
- * Till Straumann <strauman at slac.stanford.edu>, 12/20/2001:
- * Use the new interface to openpic_init
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <libcpu/io.h>
-#include <libcpu/spr.h>
-#include <bsp/pci.h>
-#include <bsp/residual.h>
-#include <bsp/irq.h>
-#include <bsp.h>
-#include <bsp/vectors.h>
-#include <rtems/bspIo.h>
-
-#define SHOW_ISA_PCI_BRIDGE_SETTINGS 1
-#define SCAN_PCI_PRINT               1
-#define TRACE_IRQ_INIT               0
-
-typedef struct {
-  unsigned char bus;	/* few chance the PCI/ISA bridge is not on first bus but ... */
-  unsigned char device;
-  unsigned char function;
-} pci_isa_bridge_device;
-
-pci_isa_bridge_device* via_82c586 = 0;
-
-extern unsigned int external_exception_vector_prolog_code_size[];
-extern void external_exception_vector_prolog_code(void);
-extern unsigned int decrementer_exception_vector_prolog_code_size[];
-extern void decrementer_exception_vector_prolog_code(void);
-
-static void IRQ_Default_rtems_irq_hdl(
-  rtems_irq_hdl_param ptr
-)
-{
-}
-
-static void IRQ_Default_rtems_irq_enable(
-  const struct __rtems_irq_connect_data__ *ptr
-)
-{
-}
-
-static void IRQ_Default_rtems_irq_disable(
-  const struct __rtems_irq_connect_data__ *ptr
-)
-{
-}
-
-static int  IRQ_Default_rtems_irq_is_enabled(
-  const struct __rtems_irq_connect_data__ *ptr)
-{
-  return 1;
-}
-
-static rtems_irq_connect_data     	rtemsIrq[BSP_IRQ_NUMBER];
-static rtems_irq_global_settings     	initial_config;
-
-static rtems_irq_connect_data defaultIrq = {
-  .name   = 0,
-  .hdl    = IRQ_Default_rtems_irq_hdl,
-  .handle = NULL,
-  .on     = IRQ_Default_rtems_irq_enable,
-  .on     = IRQ_Default_rtems_irq_disable,
-  .isOn   = IRQ_Default_rtems_irq_is_enabled
-};
-
-static rtems_irq_prio irqPrioTable[BSP_IRQ_NUMBER];
-
-  /*
-   * This code assumes the exceptions management setup has already
-   * been done. We just need to replace the exceptions that will
-   * be handled like interrupt. On mcp750/mpc750 and many PPC processors
-   * this means the decrementer exception and the external exception.
-   */
-void BSP_rtems_irq_mng_init(unsigned cpuId)
-{
-  int i;
-
-  /*
-   * First initialize the Interrupt management hardware
-   */
-
-  /*
-   * Initialize RTEMS management interrupt table
-   */
-    /*
-     * re-init the rtemsIrq table
-     */
-    for (i = 0; i < BSP_IRQ_NUMBER; i++) {
-      irqPrioTable[i]  = 8;
-      rtemsIrq[i]      = defaultIrq;
-      rtemsIrq[i].name = i;
-#ifdef BSP_SHARED_HANDLER_SUPPORT
-      rtemsIrq[i].next_handler = NULL;
-#endif
-    }
-
-    /*
-     * Init initial Interrupt management config
-     */
-    initial_config.irqNb 	= BSP_IRQ_NUMBER;
-    initial_config.defaultEntry = defaultIrq;
-    initial_config.irqHdlTbl	= rtemsIrq;
-    initial_config.irqBase	= BSP_LOWEST_OFFSET;
-    initial_config.irqPrioTbl	= irqPrioTable;
-
-    if (!BSP_rtems_irq_mngt_set(&initial_config)) {
-      /*
-       * put something here that will show the failure...
-       */
-      BSP_panic("Unable to initialize RTEMS interrupt Management!!! System locked\n");
-    }
-
-#ifdef TRACE_IRQ_INIT
-    printk("RTEMS IRQ management is now operational\n");
-#endif
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/irq/no_pic.c b/c/src/lib/libbsp/powerpc/score603e/irq/no_pic.c
deleted file mode 100644
index 37b9ca6..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/irq/no_pic.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *
- *  This file contains the implementation of the function described in irq.h
- *
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <rtems.h>
-#include <bsp.h>
-#include <bsp/irq.h>
-#include <bsp/irq_supp.h>
-#include <bsp/vectors.h>
-
-static rtems_irq_connect_data *rtems_hdl_tbl;
-static rtems_irq_connect_data  dflt_entry;
-
-/*
- * High level IRQ handler called from shared_raw_irq_code_entry
- */
-int C_dispatch_irq_handler(
-  BSP_Exception_frame *frame,
-  unsigned int excNum
-)
-{
-  register unsigned int irq;
-#if (HAS_PMC_PSC8)
-  uint16_t              check_irq;
-  uint16_t              status_word;
-#endif
-
-  if (excNum == ASM_DEC_VECTOR) {
-    bsp_irq_dispatch_list(rtems_hdl_tbl, BSP_DECREMENTER, dflt_entry.hdl);
-    return 0;
-  }
-
-  irq = read_and_clear_irq();
-
-#if (HAS_PMC_PSC8)
-   if (irq ==  SCORE603E_PCI_IRQ_0) {
-     status_word = read_and_clear_PMC_irq( irq );
-     for (check_irq=SCORE603E_IRQ16; check_irq<=SCORE603E_IRQ19; check_irq++) {
-       if ( Is_PMC_IRQ( check_irq, status_word )) {
-         bsp_irq_dispatch_list_base(rtems_hdl_tbl, check_irq, dflt_entry.hdl);
-       }
-     }
-   } else
-#endif
-   {
-    bsp_irq_dispatch_list_base(rtems_hdl_tbl, irq, dflt_entry.hdl);
-   }
-
-  return 0;
-}
-
-void
-BSP_enable_irq_at_pic(const rtems_irq_number irq)
-{
-  uint16_t  vec_idx  = irq - Score_IRQ_First;
-  unmask_irq( vec_idx );
-}
-
-int
-BSP_disable_irq_at_pic(const rtems_irq_number irq)
-{
-  uint16_t  vec_idx  = irq - Score_IRQ_First;
-  unmask_irq( vec_idx );
-  return 0;
-}
-
-int
-BSP_setup_the_pic(rtems_irq_global_settings *config)
-{
-  dflt_entry    = config->defaultEntry;
-  rtems_hdl_tbl = config->irqHdlTbl;
-  init_irq_data_register();
-  return 1;
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/make/custom/score603e.cfg b/c/src/lib/libbsp/powerpc/score603e/make/custom/score603e.cfg
deleted file mode 100644
index a657bb3..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/make/custom/score603e.cfg
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-#  Config file for a PowerPC 603e based Vista VMEbus Single Board Computer.
-#  This BSP should work with the following models:
-#
-#     + Vista SCORE 603e
-#
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-RTEMS_CPU=powerpc
-RTEMS_CPU_MODEL=mpc6xx
-
-# This is the actual bsp directory used during the build process.
-
-#  This contains the compiler options necessary to select the CPU model
-#  and (hopefully) optimize for it. 
-#
-CPU_CFLAGS = -mcpu=603e -Dppc603e
-
-# optimize flag: typically -O2
-CFLAGS_OPTIMIZE_V = -O2 -g -fno-keep-inline-functions
-
-define bsp-post-link
-	$(default-bsp-post-link)
-	$(OBJCOPY) -O srec $(basename $@)$(EXEEXT) $(basename $@).s1
-	sed -e 's/.$$//' $(basename $@).s1 | \
-	  $(PACKHEX) >$(basename $@)$(DOWNEXT)
-	rm -f $(basename $@).s1
-endef
diff --git a/c/src/lib/libbsp/powerpc/score603e/preinstall.am b/c/src/lib/libbsp/powerpc/score603e/preinstall.am
deleted file mode 100644
index da25a43..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/preinstall.am
+++ /dev/null
@@ -1,103 +0,0 @@
-## Automatically generated by ampolish3 - Do not edit
-
-if AMPOLISH3
-$(srcdir)/preinstall.am: Makefile.am
-	$(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am
-endif
-
-PREINSTALL_DIRS =
-DISTCLEANFILES += $(PREINSTALL_DIRS)
-
-all-am: $(PREINSTALL_FILES)
-
-PREINSTALL_FILES =
-CLEANFILES = $(PREINSTALL_FILES)
-
-all-local: $(TMPINSTALL_FILES)
-
-TMPINSTALL_FILES =
-CLEANFILES += $(TMPINSTALL_FILES)
-
-$(PROJECT_LIB)/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_LIB)
-	@: > $(PROJECT_LIB)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_INCLUDE)
-	@: > $(PROJECT_INCLUDE)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/bsp/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_INCLUDE)/bsp
-	@: > $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-
-$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
-PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
-
-$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
-
-$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
-
-$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
-
-$(PROJECT_INCLUDE)/bsp/bootcard.h: ../../shared/include/bootcard.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/bootcard.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/bootcard.h
-
-$(PROJECT_INCLUDE)/coverhd.h: ../../shared/include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h
-
-$(PROJECT_INCLUDE)/gen2.h: include/gen2.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/gen2.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/gen2.h
-
-$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
-PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds
-
-$(PROJECT_INCLUDE)/bsp/pci.h: ../../powerpc/shared/pci/pci.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/pci.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/pci.h
-
-$(PROJECT_INCLUDE)/bsp/PCI.h: PCI_bus/PCI.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/PCI.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/PCI.h
-
-$(PROJECT_INCLUDE)/bsp/residual.h: ../../powerpc/shared/residual/residual.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/residual.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/residual.h
-
-$(PROJECT_INCLUDE)/bsp/pnp.h: ../../powerpc/shared/residual/pnp.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/pnp.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/pnp.h
-
-$(PROJECT_INCLUDE)/bsp/consoleIo.h: ../../powerpc/shared/console/consoleIo.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/consoleIo.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/consoleIo.h
-
-$(PROJECT_INCLUDE)/bsp/irq.h: irq/irq.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq.h
-
-$(PROJECT_INCLUDE)/bsp/irq_supp.h: ../../../libcpu/@RTEMS_CPU@/@exceptions@/bspsupport/irq_supp.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq_supp.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq_supp.h
-
-$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT)
-TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT)
-
-$(PROJECT_LIB)/rtems_crti.$(OBJEXT): rtems_crti.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/rtems_crti.$(OBJEXT)
-TMPINSTALL_FILES += $(PROJECT_LIB)/rtems_crti.$(OBJEXT)
-
diff --git a/c/src/lib/libbsp/powerpc/score603e/start/start.S b/c/src/lib/libbsp/powerpc/score603e/start/start.S
deleted file mode 100644
index d58d42c..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/start/start.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * This is based on the mvme-crt0.S file from libgloss/rs6000.
- * crt0.S -- startup file for PowerPC systems.
- *
- * Copyright (c) 1995 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#include "ppc-asm.h"
-
-	.file	"start.s"
-	.section ".got2","aw"
-	.align	2
-
-.LCTOC1 = .+32768
-
-	.extern	FUNC_NAME(atexit)
-	.globl	FUNC_NAME(__atexit)
-	.section ".sdata","aw"
-	.align	2
-FUNC_NAME(__atexit):			/* tell C's eabi-ctor's we have an atexit function */
-	.long	FUNC_NAME(atexit)@fixup	/* and that it is to register __do_global_dtors */
-
-	.section ".fixup","aw"
-	.align	2
-	.long	FUNC_NAME(__atexit)
-
-	.section ".got2","aw"
-.Ltable = .-.LCTOC1
-	.long	.LCTOC1			/* address we think .LCTOC1 is loaded at */
-
-.Lbss_start = .-.LCTOC1
-	.long	_edata                 /* includes sbss and bss */
-
-.Lend = .-.LCTOC1
-	.long	_end
-
-.Lstack = .-.LCTOC1			/* stack address if set by user */
-	.long	__stack
-
-	.text
-.Lptr:
-	.long .LCTOC1-.Laddr
-
-	.globl	start
-	.globl	_start
-	.type	start, at function
-	.type	_start, at function
-start:
-_start:
-	b	past_constants
-					/* Set MSR */
-	.long	_etext                  /* end of code space */
-	.long	_edata                  /* end of code and data space */
-
-past_constants:
-	lis     r5,0
-	mr      r4,r5
-	ori     r4,r4,0x0000            /* 0x2030  */
-        mtmsr   r4
-
-        /* The first generation board needed initialization here but the */
-        /* second does not. */
-
-	bl	.Laddr			/* get current address */
-.Laddr:
-	mflr	r4			/* real address of .Laddr */
-	lwz	r5,(.Lptr-.Laddr)(r4)	/* linker generated address of .LCTOC1 */
-	add	r5,r5,r4		/* correct to real pointer */
-	lwz	r4,.Ltable(r5)		/* get linker's idea of where .Laddr is */
-	subf	r4,r4,r5		/* calculate difference between where linked and current */
-
-	/* clear bss */
-	lwz	r6,.Lbss_start(r5)	/* calculate beginning of the BSS */
-	lwz	r7,.Lend(r5)		/* calculate end of the BSS */
-	add	r6,r6,r4		/* adjust pointers */
-	add	r7,r7,r4
-
-	cmplw	1,r6,r7
-	bc	4,4,.Ldone
-
-	subf	r8,r6,r7		/* number of bytes to zero */
-	srwi	r9,r8,2			/* number of words to zero */
-	mtctr	r9
-	li	r0,0			/* zero to clear memory */
-	addi	r6,r6,-4		/* adjust so we can use stwu */
-.Lloop:
-	stwu	r0,4(r6)		/* zero bss */
-	bdnz	.Lloop
-
-.Ldone:
-
-	lwz	r0,.Lstack(r5)		/* stack address or 0 */
-	cmplwi	1,r0,0			/* equal to 0? */
-	bc	12,6,.Lnostack		/* use default stack if == 0 */
-	mr	sp,r0			/* use user defined stack */
-
-.Lnostack:
-
-        lis	r13,_SDA_BASE_ at ha
-	la	r13,_SDA_BASE_ at l(r13)  		/* Read-write small data */
-
-	/* set up initial stack frame */
-	addi	sp,sp,-4		/* make sure we don't overwrite debug mem */
-	lis	r0,0
-	stw	r0,0(sp)		/* clear back chain */
-	stwu	sp,-56(sp)		/* push another stack frame */
-
-	li	r3, 0			/* command line */
-	/* Let her rip */
-	bl	FUNC_NAME(boot_card)
-
-	/* return value from boot_card is argument to exit */
-	bl	FUNC_NAME(exit)
-	trap
-.Lstart:
-	.size	_start,.Lstart-_start
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/Hwr_init.c b/c/src/lib/libbsp/powerpc/score603e/startup/Hwr_init.c
deleted file mode 100644
index 4c68519..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/startup/Hwr_init.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*  Hwr_init.c
- *
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-
-#define PPC603e_SPR_HID0        1008
-#define PPC603e_SPR_HID1        1009
-#define PPC603e_SPR_IBAT0U       528
-#define PPC603e_SPR_IBAT0L       529
-#define PPC603e_SPR_DBAT0U       536
-#define PPC603e_SPR_DBAT0L       537
-#define PPC603e_SPR_IBAT1U       530
-#define PPC603e_SPR_IBAT1L       531
-#define PPC603e_SPR_DBAT1U       538
-#define PPC603e_SPR_DBAT1L       539
-#define PPC603e_SPR_IBAT2U       532
-#define PPC603e_SPR_IBAT2L       533
-#define PPC603e_SPR_DBAT2U       540
-#define PPC603e_SPR_DBAT2L       541
-#define PPC603e_SPR_IBAT3U       534
-#define PPC603e_SPR_IBAT3L       535
-#define PPC603e_SPR_DBAT3U       542
-#define PPC603e_SPR_DBAT3L       543
-#define PPC603e_SPR_DMISS        976
-#define PPC603e_SPR_DCMP         977
-#define PPC603e_SPR_HASH1        978
-#define PPC603e_SPR_HASH2        979
-#define PPC603e_SPR_IMISS        980
-#define PPC603e_SPR_ICMP         981
-#define PPC603e_SPR_RPA          982
-#define PPC603e_SPR_SDR1          25
-#define PPC603e_SPR_PVR          287
-#define PPC603e_SPR_DAR           19
-#define PPC603e_SPR_SPRG0        272
-#define PPC603e_SPR_SPRG1        273
-#define PPC603e_SPR_SPRG2        274
-#define PPC603e_SPR_SPRG3        275
-#define PPC603e_SPR_DSISR         18
-#define PPC603e_SPR_SRR0          26
-#define PPC603e_SPR_SRR1          27
-#define PPC603e_SPR_TBL_WRITE    284
-#define PPC603e_SPR_TBU_WRITE    285
-#define PPC603e_SPR_DEC           22
-#define PPC603e_SPR_IABR        1010
-#define PPC603e_SPR_EAR          282
-
-#define PCI_MEM_CMD   (SCORE603E_PCI_MEM_BASE >> 16)
-
-typedef struct {
-  uint32_t          counter_1_100;
-  uint32_t          counter_hours;
-  uint32_t          counter_min;
-  uint32_t          counter_sec;
-  uint32_t          counter_month;
-  uint32_t          counter_date;
-  uint32_t          counter_year;
-  uint32_t          counter_day_of_week;
-
-  uint32_t          RAM_1_100;
-  uint32_t          RAM_hours;
-  uint32_t          RAM_month;
-  uint32_t          RAM_date;
-  uint32_t          RAM_year;
-  uint32_t          RAM_day_of_week;
-
-  uint32_t          interupt_status_mask;
-  uint32_t          command_register;
-}Harris_RTC;
-
-void init_RTC(void)
-{
-  volatile Harris_RTC *the_RTC;
-
-  the_RTC = (volatile Harris_RTC *)BSP_RTC_ADDRESS;
-
-  the_RTC->command_register = 0x0;
-}
-
-void init_PCI(void)
-{
-  /* DINK Monitor setsup and uses all 4 BAT registers.  */
-  /* The fourth BAT register can be modified to access this area */
-}
-
-#define PPC_Get_HID0( _value ) \
-  do { \
-      _value = 0;        /* to avoid warnings */ \
-      __asm__ volatile( \
-          "mfspr %0, 0x3f0;"     /* get HID0 */ \
-          "isync" \
-          : "=r" (_value) \
-          : "0" (_value) \
-      ); \
-  } while (0)
-
-#define PPC_Set_HID0( _value ) \
-  do { \
-      __asm__ volatile( \
-          "isync;" \
-          "mtspr 0x3f0, %0;"     /* load HID0 */ \
-          "isync" \
-          : "=r" (_value) \
-          : "0" (_value) \
-      ); \
-  } while (0)
-
-void instruction_cache_enable (void)
-{
-  uint32_t         value;
-
-  /*
-   * Enable the instruction cache
-   */
-
-  PPC_Get_HID0( value );
-
-  value |= 0x00008000;       /* Set ICE bit */
-
-  PPC_Set_HID0( value );
-}
-
-void data_cache_enable (void)
-{
-  uint32_t         value;
-
-  /*
-   * enable data cache
-   */
-
-  PPC_Get_HID0( value );
-
-  value |= 0x00004000;        /* set DCE bit */
-
-  PPC_Set_HID0( value );
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/bspstart.c b/c/src/lib/libbsp/powerpc/score603e/startup/bspstart.c
deleted file mode 100644
index 70933af..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/startup/bspstart.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- *  This routine does the bulk of the system initialization.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2010.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <string.h>
-
-#include <bsp.h>
-#include <bsp/bootcard.h>
-#include <rtems/libio.h>
-#include <rtems/libcsupport.h>
-#include <rtems/bspIo.h>
-#include <rtems/counter.h>
-#include <libcpu/cpuIdent.h>
-#include <bsp/irq.h>
-
-#define DEBUG 0
-
-/*
- * Where the heap starts; is used by bsp_pretasking_hook;
- */
-unsigned int BSP_heap_start;
-
-/*
- * PCI Bus Frequency
- */
-unsigned int BSP_bus_frequency;
-
-/*
- * processor clock frequency
- */
-unsigned int BSP_processor_frequency;
-
-/*
- * Time base divisior (how many tick for 1 second).
- * Note: Calibrated with an application using a 20ms timer and
- * a scope.
- */
-unsigned int BSP_time_base_divisor = 3960;
-
-/*
- *  Driver configuration parameters
- */
-uint32_t   bsp_clicks_per_usec;
-
-/*
- * Memory on this board.
- */
-extern char RamSize[];
-uint32_t BSP_mem_size;
-
-extern unsigned long __rtems_end[];
-
-void BSP_panic(char *s)
-{
-  printk("%s PANIC %s\n",_RTEMS_version, s);
-  __asm__ __volatile ("sc");
-}
-
-void _BSP_Fatal_error(unsigned int v)
-{
-  printk("%s PANIC ERROR %x\n",_RTEMS_version, v);
-  __asm__ __volatile ("sc");
-}
-
-/*
- *  bsp_predriver_hook
- *
- *  Before drivers are setup initialize interupt vectors.
- */
-void init_RTC(void);
-void initialize_PMC(void);
-
-void bsp_predriver_hook(void)
-{
-  init_PCI();
-  initialize_universe();
-
-  #if DEBUG
-    printk("bsp_predriver_hook: initialize_PCI_bridge\n");
-  #endif
-  initialize_PCI_bridge ();
-
-#if (HAS_PMC_PSC8)
-  #if DEBUG
-    printk("bsp_predriver_hook: initialize_PMC\n");
-  #endif
-  initialize_PMC();
-#endif
-
-  #if DEBUG
-    printk("bsp_predriver_hook: End of routine\n");
-  #endif
-
-}
-
-/*PAGE
- *
- *  initialize_PMC
- */
-
-void initialize_PMC(void) {
-  volatile uint32_t     *PMC_addr;
-  uint32_t               data;
-
-  /*
-   * Clear status, enable SERR and memory space only.
-   */
-  PMC_addr = BSP_PCI_DEVICE_ADDRESS( 0x4 );
-  *PMC_addr = 0x020080cc;
-  #if DEBUG
-    printk("initialize_PMC: 0x%x = 0x%x\n", PMC_addr, 0x020080cc);
-  #endif
-
-  /*
-   * set PMC base address.
-   */
-  PMC_addr  = BSP_PCI_DEVICE_ADDRESS( 0x14 );
-  *PMC_addr = (BSP_PCI_REGISTER_BASE >> 24) & 0x3f;
-  #if DEBUG
-    printk("initialize_PMC: 0x%x = 0x%x\n", PMC_addr, ((BSP_PCI_REGISTER_BASE >> 24) & 0x3f));
-  #endif
-
-   PMC_addr = (volatile uint32_t*)
-      BSP_PMC_SERIAL_ADDRESS( 0x100000 );
-  data = *PMC_addr;
-  #if DEBUG
-    printk("initialize_PMC: Read 0x%x (0x%x)\n", PMC_addr, data );
-    printk("initialize_PMC: Read 0x%x (0x%x)\n", PMC_addr, data & 0xfc );
-  #endif
-  *PMC_addr = data & 0xfc;
-}
-
-/*PAGE
- *
- *  bsp_start
- *
- *  This routine does the bulk of the system initialization.
- */
-
-void bsp_start( void )
-{
-  unsigned int         msr_value = 0x0000;
-  uintptr_t            intrStackStart;
-  uintptr_t            intrStackSize;
-  ppc_cpu_id_t         myCpu;
-  ppc_cpu_revision_t   myCpuRevision;
-
-  rtems_bsp_delay( 1000 );
-
-  /*
-   *  Zero out lots of memory
-   */
-  #if DEBUG
-    printk("bsp_start: Zero out lots of memory\n");
-  #endif
-
-  BSP_processor_frequency = 266000000;
-  BSP_bus_frequency       =  66000000;
-
-  /*
-   * Get CPU identification dynamically. Note that the get_ppc_cpu_type()
-   * function store the result in global variables so that it can be used
-   * later...
-   */
-  myCpu         = get_ppc_cpu_type();
-  myCpuRevision = get_ppc_cpu_revision();
-  printk("Cpu: 0x%x  Revision: %d\n", myCpu, myCpuRevision);
-  printk("Cpu %s\n", get_ppc_cpu_type_name(myCpu) );
-
-  /*
-   * Initialize the interrupt related settings.
-   */
-  intrStackStart = (uintptr_t) __rtems_end;
-  intrStackSize = rtems_configuration_get_interrupt_stack_size();
-  printk("Interrupt Stack Start: 0x%x Size: 0x%x  Heap Start: 0x%x\n",
-    intrStackStart, intrStackSize, BSP_heap_start
-  );
-
-  BSP_mem_size = (uint32_t) RamSize;
-  printk("BSP_mem_size: %p\n", RamSize );
-
-  /*
-   * Initialize default raw exception handlers.
-   */
-  ppc_exc_initialize(intrStackStart, intrStackSize);
-
-  msr_value = 0x2030;
-  _CPU_MSR_SET( msr_value );
-  __asm__ volatile("sync; isync");
-
-  /*
-   *  initialize the device driver parameters
-   */
-  #if DEBUG
-    printk("bsp_start: set clicks poer usec\n");
-  #endif
-  bsp_clicks_per_usec = 66 / 4;
-  rtems_counter_initialize_converter(bsp_clicks_per_usec * 1000000);
-
-  #if BSP_DATA_CACHE_ENABLED
-    #if DEBUG
-      printk("bsp_start: cache_enable\n");
-    #endif
-    instruction_cache_enable ();
-    data_cache_enable ();
-    #if DEBUG
-      printk("bsp_start: END BSP_DATA_CACHE_ENABLED\n");
-    #endif
-  #endif
-
-  /*
-   * Initalize RTEMS IRQ system
-   */
-  #if DEBUG
-    printk("bspstart: Call BSP_rtems_irq_mng_init\n");
-  #endif
-  BSP_rtems_irq_mng_init(0);
-
-  #if DEBUG
-    printk("bsp_start: end BSPSTART\n");
-    ShowBATS();
-  #endif
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/genpvec.c b/c/src/lib/libbsp/powerpc/score603e/startup/genpvec.c
deleted file mode 100644
index 323bb39..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/startup/genpvec.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- *  These routines handle the external exception.  Multiple ISRs occur off
- *  of this one interrupt.
- *
- *  COPYRIGHT (c) 1989-2008.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may in
- *  the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <rtems/chain.h>
-#include <rtems/bspIo.h>
-#include <assert.h>
-
-#include <stdio.h> /* for sprintf */
-
-/*
- * Proto types for this file
- */
-
-rtems_isr external_exception_ISR (
-  rtems_vector_number   vector                                  /* IN  */
-);
-
-#define   NUM_LIRQ_HANDLERS   20
-#define   NUM_LIRQ            ( MAX_BOARD_IRQS - PPC_IRQ_LAST )
-
-/*
- * Structure to for one of possible multiple interrupt handlers for
- * a given interrupt.
- */
-typedef struct
-{
-  rtems_chain_node    Node;
-  rtems_isr_entry     handler;                  /* isr routine        */
-  rtems_vector_number vector;                   /* vector number      */
-} EE_ISR_Type;
-
-/* Note:  The following will not work if we add a method to remove
- *        handlers at a later time.
- */
-  EE_ISR_Type         ISR_Nodes [NUM_LIRQ_HANDLERS];
-  uint16_t            Nodes_Used;
-  rtems_chain_control ISR_Array  [NUM_LIRQ];
-
-/* XXX */
-void init_irq_data_register(void);
-
-void Init_EE_mask_init(void)
-{
-}
-
-/*
- *  This routine installs one of multiple ISRs for the general purpose
- *  inerrupt.
- */
-rtems_isr_entry  set_EE_vector(
-  rtems_isr_entry     handler,      /* isr routine        */
-  rtems_vector_number vector        /* vector number      */
-)
-{
-  uint16_t         vec_idx  = vector - Score_IRQ_First;
-  uint32_t         index;
-
-  assert  (Nodes_Used < NUM_LIRQ_HANDLERS);
-
-  /*
-   *  If we have already installed this handler for this vector, then
-   *  just reset it.
-   */
-
-  for ( index=0 ; index <= Nodes_Used ; index++ ) {
-    if ( ISR_Nodes[index].vector == vector &&
-         ISR_Nodes[index].handler == handler )
-      return NULL;
-  }
-
-  /*
-   *  Doing things in this order makes them more atomic
-   */
-
-  Nodes_Used++;
-
-  index = Nodes_Used - 1;
-
-  ISR_Nodes[index].handler = handler;
-  ISR_Nodes[index].vector  = vector;
-
-  /* printf( "Vector Index: %04x, Vector: %d (%x)\n",
-          vec_idx, vector, vector); */
-
-  rtems_chain_append( &ISR_Array[vec_idx], &ISR_Nodes[index].Node );
-
-  /*
-   * Unmask the interrupt.
-   */
-  unmask_irq( vec_idx );
-
-  return NULL;
-}
-
-/*
- * This interrupt service routine is called for an External Exception.
- */
-rtems_isr external_exception_ISR (
-  rtems_vector_number   vector             /* IN  */
-)
-{
- uint16_t            index;
- EE_ISR_Type         *node;
- uint16_t            value;
-#if (HAS_PMC_PSC8)
- uint16_t            PMC_irq;
- uint16_t            check_irq;
- uint16_t            status_word;
-#endif
-
- index = read_and_clear_irq();
- if ( index >= NUM_LIRQ ) {
-   printk( "ERROR:: Invalid interrupt number (%02x)\n", index );
-   return;
- }
-
-#if (HAS_PMC_PSC8)
-  PMC_irq = SCORE603E_PCI_IRQ_0 - SCORE603E_IRQ00;
-
-  if (index ==  PMC_irq) {
-    status_word = read_and_clear_PMC_irq( index );
-
-    for (check_irq=SCORE603E_IRQ16; check_irq<=SCORE603E_IRQ19; check_irq++) {
-      if ( Is_PMC_IRQ( check_irq, status_word )) {
-        index = check_irq - SCORE603E_IRQ00;
-        node = (EE_ISR_Type *)(ISR_Array[ index ].first);
-
-        if ( rtems_chain_is_tail( &ISR_Array[ index ], (void *)node ) ) {
-          printk ("ERROR:: check %d interrupt %02d has no isr\n", check_irq, index);
-          value = get_irq_mask();
-          printk("        Mask = %02x\n", value);
-	}
-        while ( !rtems_chain_is_tail( &ISR_Array[ index ], (void *)node ) ) {
-          (*node->handler)( node->vector );
-          node = (EE_ISR_Type *) node->Node.next;
-        }
-      }
-    }
-  }
-  else
-#endif
-  {
-    node = (EE_ISR_Type *)(ISR_Array[ index ].first);
-    if ( rtems_chain_is_tail( &ISR_Array[ index ], (void *)node ) ) {
-      printk( "ERROR:: interrupt %02x has no isr\n", index);
-      value = get_irq_mask();
-      printk("        Mask = %02x\n", value);
-      return;
-    }
-    while ( !rtems_chain_is_tail( &ISR_Array[ index ], (void *)node ) ) {
-     (*node->handler)( node->vector );
-     node = (EE_ISR_Type *) node->Node.next;
-    }
-  }
-
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/linkcmds b/c/src/lib/libbsp/powerpc/score603e/startup/linkcmds
deleted file mode 100644
index 7006557..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/startup/linkcmds
+++ /dev/null
@@ -1,248 +0,0 @@
-OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc",
-	      "elf32-powerpc")
-
-OUTPUT_ARCH(powerpc)
-ENTRY(_start)
-
-/*
- *  Number of Decrementer countdowns per millisecond
- *
- *  Calculated by:  (66 Mhz * 1000) / 4 cycles per click
- */
-
-PROVIDE(CPU_PPC_CLICKS_PER_MS = 16500);
-
-RamBase = DEFINED(RamBase) ? RamBase : 0x0;
-RamSize = DEFINED(RamSize) ? RamSize : 31M;
-
-MEMORY
-  {
-        VECTORS : ORIGIN = 0, LENGTH = 64K
-        RAM : ORIGIN = 1M, LENGTH = 31M
-        EPROM : ORIGIN = 0xFFF00000, LENGTH = 0x80000
-  }
-
-SECTIONS
-{
-  .vectors 0x00100 :
-  {
-    *(.vectors)
-  }
-
-  /* Read-only sections, merged into text segment: */
-  /* SDS ROM worked at 0x30000                     */
-  .interp         : { *(.interp) }
-  .hash		  : { *(.hash)		}
-  .dynsym	  : { *(.dynsym)		}
-  .dynstr	  : { *(.dynstr)		}
-
-  .rel.dyn        :
-    {
-      *(.rel.init)
-      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
-      *(.rel.fini)
-      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
-      *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*)
-      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
-      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
-      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
-      *(.rel.ctors)
-      *(.rel.dtors)
-      *(.rel.got)
-      *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
-      *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
-      *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
-      *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
-      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
-    } >RAM
-  .rela.dyn       :
-    {
-      *(.rela.init)
-      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
-      *(.rela.fini)
-      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
-      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
-      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
-      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
-      *(.rela.ctors)
-      *(.rela.dtors)
-      *(.rela.got)
-      *(.rela.got1)
-      *(.rela.got2)
-      *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
-      *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
-      *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
-      *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
-      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
-    } >RAM
-  .rel.plt        : { *(.rel.plt) }
-  .rela.plt       : { *(.rela.plt) }
-
-  .plt   : { *(.plt) }
- .text  0x100000:
-  {
-    
-    *(.text*)
-    *(.gnu.linkonce.t.*)
-    *(.descriptors)
-
-    /*
-     * Special FreeBSD sysctl sections.
-     */
-    . = ALIGN (16);
-    __start_set_sysctl_set = .;
-    *(set_sysctl_*);
-    __stop_set_sysctl_set = ABSOLUTE(.);
-    *(set_domain_*);
-    *(set_pseudo_*);
-
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-  }  >RAM
-  .init		  : { _init = .; __init = .; *(.init)		} >RAM
-  .fini		  : { _fini = .; __fini = .; *(.fini)		} >RAM
-  .rodata  	  : { *(.rodata*) KEEP (*(SORT(.rtemsroset.*))) *(.gnu.linkonce.r*) } >RAM
-  .rodata1	  : { *(.rodata1)		} >RAM
-  .tdata : {
-    _TLS_Data_begin = .;
-    *(.tdata .tdata.* .gnu.linkonce.td.*)
-    _TLS_Data_end = .;
-  } >RAM
-  .tbss : {
-    _TLS_BSS_begin = .;
-    *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon)
-    _TLS_BSS_end = .;
-  } >RAM
-  _TLS_Data_size = _TLS_Data_end - _TLS_Data_begin;
-  _TLS_Data_begin = _TLS_Data_size != 0 ? _TLS_Data_begin : _TLS_BSS_begin;
-  _TLS_Data_end = _TLS_Data_size != 0 ? _TLS_Data_end : _TLS_BSS_begin;
-  _TLS_BSS_size = _TLS_BSS_end - _TLS_BSS_begin;
-  _TLS_Size = _TLS_BSS_end - _TLS_Data_begin;
-  _TLS_Alignment = MAX (ALIGNOF (.tdata), ALIGNOF (.tbss));
-  .eh_frame	  : { *(.eh_frame)		} >RAM
-  _etext = .;
-  PROVIDE (_etext = .);
-  PROVIDE (__SDATA2_START__ = .);
-  .sdata2   	  : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) } >RAM
-  .sbss2   	  : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) } >RAM
-  PROVIDE (__SBSS2_END__ = .);
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  It would
-     be more correct to do this:
-       . = ALIGN(0x40000) + (ALIGN(8) & (0x40000 - 1));
-     The current expression does not correctly handle the case of a
-     text segment ending precisely at the end of a page; it causes the
-     data segment to skip a page.  The above expression does not have
-     this problem, but it will currently (2/95) cause BFD to allocate
-     a single segment, combining both text and data, for this case.
-     This will prevent the text segment from being shared among
-     multiple executions of the program; I think that is more
-     important than losing a page of the virtual address space (note
-     that no actual memory is lost; the page which is skipped can not
-     be referenced).  */
-  . =  ALIGN(8) + 0x40000;
-  PROVIDE (sdata = .);
-  .data    :
-  {
-   *(.data)
-    *(.data.*)
-    KEEP (*(SORT(.rtemsrwset.*)))
-    *(.gnu.linkonce.d.*)
-    CONSTRUCTORS
-  } >RAM
-  PROVIDE (__EXCEPT_START__ = .);
-  .gcc_except_table   : { *(.gcc_except_table*) } >RAM
-  PROVIDE (__EXCEPT_END__ = .);
-
-  .data1   	  : { *(.data1) 	} >RAM
-  .got1		  : { *(.got1) 		} >RAM
-  .dynamic	  : { *(.dynamic) 	} >RAM
-  /* Put .ctors and .dtors next to the .got2 section, so that the pointers
-     get relocated with -mrelocatable. Also put in the .fixup pointers.
-     The current compiler no longer needs this, but keep it around for 2.7.2  */
-		PROVIDE (_GOT2_START_ = .);
-  .got2		  :  { *(.got2)	} >RAM
-		PROVIDE (__GOT2_END__ = .);
-		PROVIDE (__CTOR_LIST__ = .);
-  .ctors	  : { *(.ctors) } >RAM
-		PROVIDE (__CTOR_END__ = .);
-		PROVIDE (__DTOR_LIST__ = .);
-  .dtors	  : { *(.dtors) } >RAM
-		PROVIDE (__DTOR_END__ = .);
-		PROVIDE (_FIXUP_START_ = .);
-  .fixup	  : { *(.fixup) } >RAM
-		PROVIDE (_FIXUP_END_ = .);
-		PROVIDE (__FIXUP_END__ = .);
-		PROVIDE (_GOT2_END_ = .);
-  .got		  : {
-    PROVIDE (_GOT_START_ = .);
-    s.got = .;
-    *(.got)
-  }	 >RAM
-  .got.plt	  : { *(.got.plt) } >RAM
-		PROVIDE (_GOT_END_ = .);
-		PROVIDE (__GOT_END__ = .);
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  PROVIDE (__SDATA_START__ = .);
-  .sdata	  : {
-     *(.sdata .sdata.* .gnu.linkonce.s.*)
-     _edata  =  .;
-  } >RAM
-  PROVIDE (_edata = .);
-  PROVIDE (RAM_END = ADDR(.text) + 10M);
-  . =  ALIGN(8) + 0x1000;
-  .sbss      :
-  {
-    PROVIDE (__sbss_start = .);
-    *(.sbss*)
-    *(.scommon)
-    *(.gnu.linkonce.sb.*)
-    PROVIDE (__sbss_end = .);
-  } >RAM
-  .bss       :
-  {
-    PROVIDE (__bss_start = .);
-    *(.dynbss)
-    *(.bss .bss* .gnu.linkonce.b*)
-    *(COMMON)
-  }  >RAM
-  . = ALIGN(16) + 0x8000;
-  PROVIDE (__stack = .);
-  __rtems_end = . ;
-  . =  ALIGN(8) + 0x8000;
-  PROVIDE(_end = .);
-  PROVIDE(end = .);
-
-  /* These are needed for ELF backends which have not yet been
-     converted to the new style linker.  */
-  .stab 0 : { *(.stab) } >RAM
-  .stabstr 0 : { *(.stabstr) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/startup/vmeintr.c b/c/src/lib/libbsp/powerpc/score603e/startup/vmeintr.c
deleted file mode 100644
index 5d455b9..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/startup/vmeintr.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  VMEbus support routines for the Generation I board.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2008.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may in
- *  the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <rtems.h>
-#include <bsp.h>
-#include <rtems/vmeintr.h>
-
-/*
- *  VME_interrupt_Disable
- */
-void VME_interrupt_Disable(
-  VME_interrupt_Mask                mask                        /* IN  */
-)
-{
-  volatile uint8_t  *VME_interrupt_enable;
-  uint8_t           value;
-
-  VME_interrupt_enable = 0;
-  value = *VME_interrupt_enable;
-  value &= ~mask;  /* turn off interrupts for all levels in mask */
-  *VME_interrupt_enable = value;
-}
-
-/*
- *  VME_interrupt_Enable
- */
-void VME_interrupt_Enable(
-  VME_interrupt_Mask                mask                        /* IN  */
-)
-{
-  volatile uint8_t          *VME_interrupt_enable;
-  uint8_t          value;
-
-  VME_interrupt_enable = 0;
-  value = *VME_interrupt_enable;
-  value |= mask;  /* turn on interrupts for all levels in mask */
-  *VME_interrupt_enable = value;
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/timer/timer.c b/c/src/lib/libbsp/powerpc/score603e/timer/timer.c
deleted file mode 100644
index f1f1312..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/timer/timer.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*  timer.c
- *
- *  This file implements a benchmark timer using the General Purpose Timer.
- *
- *  Notes:
- *
- *  BSP_TIMER_AVG_OVERHEAD and BSP_TIMER_LEAST_VALID are required to be
- *  provided in bsp.h
- *
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <assert.h>
-
-#include <bsp.h>
-#include <rtems/btimer.h>
-
-uint64_t         Timer_driver_Start_time;
-
-bool benchmark_timer_find_average_overhead;
-
-/*
- * benchmark_timer_initialize
- */
-
-void benchmark_timer_initialize()
-{
-
-  /*
-   *  Timer runs long and accurate enough not to require an interrupt.
-   */
-
-  Timer_driver_Start_time = PPC_Get_timebase_register();
-}
-
-/*
- *  benchmark_timer_read
- */
-
-benchmark_timer_t benchmark_timer_read()
-{
-  uint64_t          clicks;
-  uint64_t          total64;
-  uint32_t          total;
-
-  /* approximately CLOCK_SPEED clicks per microsecond */
-
-  clicks = PPC_Get_timebase_register();
-
-  assert( clicks > Timer_driver_Start_time );
-
-  total64 = clicks - Timer_driver_Start_time;
-
-  assert( total64 <= 0xffffffff );  /* fits into a uint32_t   */
-
-  total = (uint32_t) total64;
-
-  if ( benchmark_timer_find_average_overhead == true )
-    return total;          /* in "clicks" of the decrementer units */
-
-  if ( total < BSP_TIMER_LEAST_VALID )
-    return 0;            /* below timer resolution */
-
-  return BSP_Convert_decrementer(total - BSP_TIMER_AVG_OVERHEAD);
-}
-
-void benchmark_timer_disable_subtracting_average_overhead(
-  bool find_flag
-)
-{
-  benchmark_timer_find_average_overhead = find_flag;
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/tod/tod.c b/c/src/lib/libbsp/powerpc/score603e/tod/tod.c
deleted file mode 100644
index 217c6f0..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/tod/tod.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Real Time Clock (Harris ICM7170) for RTEMS
- *
- *  This part is found on the second generation of this board.
- *
- *  COPYRIGHT (c) 1989-2009.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <rtems.h>
-#include <tod.h>
-#include <bsp.h>
-
-/*
- * These values are programed into a register and must not be changed.
- */
-
-#define ICM1770_CRYSTAL_FREQ_32K      0x00
-#define ICM1770_CRYSTAL_FREQ_1M       0x01
-#define ICM1770_CRYSTAL_FREQ_2M       0x02
-#define ICM1770_CRYSTAL_FREQ_4M       0x03
-
-void ICM7170_GetTOD(
-  volatile unsigned char *imc1770_regs,
-  uint8_t                icm1770_freq,
-  rtems_time_of_day      *rtc_tod
-);
-void ICM7170_SetTOD(
-  volatile unsigned char *imc1770_regs,
-  uint8_t                icm1770_freq,
-  rtems_time_of_day      *rtc_tod
-);
-
-/*
- *  This code is dependent on the Vista 603e's use of the ICM7170 RTC/NVRAM
- *  and should remain in this file.
- */
-
-void setRealTimeToRTEMS()
-{
-  rtems_time_of_day rtc_tod;
-
-  ICM7170_GetTOD( BSP_RTC_ADDRESS, BSP_RTC_FREQUENCY, &rtc_tod );
-  rtems_clock_set( &rtc_tod );
-}
-
-void setRealTimeFromRTEMS()
-{
-  rtems_time_of_day rtems_tod;
-
-  rtems_clock_get_tod( &rtems_tod );
-  ICM7170_SetTOD( BSP_RTC_ADDRESS, BSP_RTC_FREQUENCY, &rtems_tod );
-}
-
-int checkRealTime()
-{
-  rtems_time_of_day rtems_tod;
-  rtems_time_of_day rtc_tod;
-
-  ICM7170_GetTOD( BSP_RTC_ADDRESS, BSP_RTC_FREQUENCY, &rtc_tod );
-  rtems_clock_get_tod( &rtems_tod );
-
-  if( rtems_tod.year == rtc_tod.year &&
-      rtems_tod.month == rtc_tod.month &&
-      rtems_tod.day == rtc_tod.day ) {
-     return ((rtems_tod.hour   - rtc_tod.hour) * 3600) +
-            ((rtems_tod.minute - rtc_tod.minute) * 60) +
-             (rtems_tod.second - rtc_tod.second);
-  }
-  return 9999;
-}
-
-/*
- *  These routines are ICM7170 should be in
- *  a separate support library.
- * XXX Make static
- */
-static int ICM7170_GetField(
-  volatile unsigned char *imc1770_regs,
-  int                     reg
-)
-{
-  unsigned char x;
-
-  x = imc1770_regs[reg*4];
-
-  return x;
-}
-
-static void ICM7170_SetField(
-  volatile unsigned char *imc1770_regs,
-  int                     reg,
-  unsigned char             d
-)
-{
-  imc1770_regs[reg*4] = d;
-}
-
-void ICM7170_GetTOD(
-  volatile unsigned char *imc1770_regs,
-  uint8_t                icm1770_freq,
-  rtems_time_of_day      *rtc_tod
-)
-{
-  int year;
-  int usec;
-  static bool init = true;
-
-  /* Initialize the clock at once prior to reading */
-  if (init ) {
-    ICM7170_SetField( imc1770_regs,  0x11, (0x0c | icm1770_freq) );
-    init = false;
-  }
-
-  /* Latch times */
-  /* rtc_tod->ticks  = */
-
-  usec = ICM7170_GetField( imc1770_regs, 0x00 );
-
-  year = ICM7170_GetField( imc1770_regs, 0x06 );
-  if ( year >= 88 )
-    year += 1900;
-  else
-    year += 2000;
-
-  rtc_tod->year   = year;
-  rtc_tod->month  = ICM7170_GetField( imc1770_regs, 0x04 );
-  rtc_tod->day    = ICM7170_GetField( imc1770_regs, 0x05 );
-  rtc_tod->hour   = ICM7170_GetField( imc1770_regs, 0x01 );
-  rtc_tod->minute = ICM7170_GetField( imc1770_regs, 0x02 );
-  rtc_tod->second = ICM7170_GetField( imc1770_regs, 0x03 );
-  rtc_tod->ticks  = ICM7170_GetField( imc1770_regs, 0x00 );
-}
-
-void ICM7170_SetTOD(
-  volatile unsigned char *imc1770_regs,
-  uint8_t                icm1770_freq,
-  rtems_time_of_day      *rtc_tod
-)
-{
-  int year;
-
-  year = rtc_tod->year;
-  if ( year >= 2088 )        /* plan ahead :) */
-    rtems_fatal_error_occurred( 0xBAD0BAD0 );
-
-  if ( year >= 2000 )
-    year -= 2000;
-  else
-    year -= 1900;
-
-  ICM7170_SetField( imc1770_regs, 0x11, (0x04 |icm1770_freq ) );
-
-  ICM7170_SetField( imc1770_regs, 0x06, year );
-  ICM7170_SetField( imc1770_regs, 0x04, rtc_tod->month );
-  ICM7170_SetField( imc1770_regs, 0x05, rtc_tod->day );
-  ICM7170_SetField( imc1770_regs, 0x01, rtc_tod->hour );
-  ICM7170_SetField( imc1770_regs, 0x02, rtc_tod->minute );
-  ICM7170_SetField( imc1770_regs, 0x03, rtc_tod->second );
-
-  /*
-   * I don't know which day of week is
-   *
-   */
-  ICM7170_SetField( imc1770_regs, 0x07, 1 );
-
-  ICM7170_SetField( imc1770_regs,  0x11, (0x0c | icm1770_freq) );
-}
diff --git a/c/src/lib/libbsp/powerpc/score603e/vme/VMEConfig.h b/c/src/lib/libbsp/powerpc/score603e/vme/VMEConfig.h
deleted file mode 100644
index cfe9a48..0000000
--- a/c/src/lib/libbsp/powerpc/score603e/vme/VMEConfig.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef RTEMS_BSP_VME_CONFIG_H
-#define RTEMS_BSP_VME_CONFIG_H
-
-/* BSP specific address space configuration parameters */
-
-/*
- * Authorship
- * ----------
- * This software was created by
- *     Till Straumann <strauman at slac.stanford.edu>, 2002,
- * 	   Stanford Linear Accelerator Center, Stanford University.
- *
- * Acknowledgement of sponsorship
- * ------------------------------
- * This software was produced by
- *     the Stanford Linear Accelerator Center, Stanford University,
- * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
- *
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- *
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- *
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software.  Hence, anyone may
- * freely use it for any purpose without restriction.
- *
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- *
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */
-/*
- * The BSP maps VME address ranges into
- * one BAT.
- * NOTE: the BSP (startup/bspstart.c) uses
- * hardcoded window lengths that match this
- * layout:
- *
- * BSP_VME_BAT_IDX defines
- * which BAT to use for mapping the VME bus.
- * If this is undefined, no extra BAT will be
- * configured and VME has to share the available
- * PCI address space with PCI devices.
- */
-#undef   BSP_VME_BAT_IDX
-
-#define _VME_A32_WIN0_ON_PCI	0x10000000
-#define _VME_A24_ON_PCI			0x1f000000
-#define _VME_A16_ON_PCI			0x1fff0000
-
-/* start of the A32 window on the VME bus
- * TODO: this should perhaps be a configuration option
- */
-#define _VME_A32_WIN0_ON_VME	0x20000000
-
-/* if _VME_DRAM_OFFSET is defined, the BSP
- * will map our RAM onto the VME bus, starting
- * at _VME_DRAM_OFFSET
- */
-#undef  _VME_DRAM_OFFSET
-
-/* Tell the interrupt manager that the universe driver
- * already called openpic_eoi() and that this step hence
- * must be omitted.
- */
-
-#undef _VME_CSR_ON_PCI
-
-#undef BSP_PCI_VME_DRIVER_DOES_EOI
-
-extern int BSP_VMEInit();
-extern int BSP_VMEIrqMgrInstall();
-
-#define BSP_VME_UNIVERSE_INSTALL_IRQ_MGR(err)						\
-	do {														\
-  		err = vmeUniverseInstallIrqMgr(0,5,1,6);						\
-	} while (0)
-
-#endif
-- 
2.3.5



More information about the devel mailing list