[PATCH] arm/gp32: Remove
Aun-Ali Zaidi
admin at kodeit.net
Sun Dec 13 04:24:16 UTC 2015
updates #2451.
---
c/src/lib/libbsp/arm/acinclude.m4 | 2 -
c/src/lib/libbsp/arm/gp32/Makefile.am | 68 ----
c/src/lib/libbsp/arm/gp32/README | 3 -
c/src/lib/libbsp/arm/gp32/bsp_specs | 13 -
c/src/lib/libbsp/arm/gp32/configure.ac | 23 --
c/src/lib/libbsp/arm/gp32/console/uart.c | 245 ---------------
c/src/lib/libbsp/arm/gp32/include/bsp.h | 96 ------
c/src/lib/libbsp/arm/gp32/make/custom/gp32.cfg | 21 --
c/src/lib/libbsp/arm/gp32/preinstall.am | 79 -----
c/src/lib/libbsp/arm/gp32/smc/smc.c | 417 -------------------------
c/src/lib/libbsp/arm/gp32/smc/smc.h | 44 ---
c/src/lib/libbsp/arm/gp32/start/start.S | 198 ------------
c/src/lib/libbsp/arm/gp32/startup/bspidle.c | 23 --
c/src/lib/libbsp/arm/gp32/startup/bspreset.c | 39 ---
c/src/lib/libbsp/arm/gp32/startup/bspstart.c | 89 ------
c/src/lib/libbsp/arm/gp32/startup/linkcmds | 26 --
c/src/lib/libbsp/arm/gp32/startup/memmap.c | 25 --
17 files changed, 1411 deletions(-)
delete mode 100644 c/src/lib/libbsp/arm/gp32/Makefile.am
delete mode 100644 c/src/lib/libbsp/arm/gp32/README
delete mode 100644 c/src/lib/libbsp/arm/gp32/bsp_specs
delete mode 100644 c/src/lib/libbsp/arm/gp32/configure.ac
delete mode 100644 c/src/lib/libbsp/arm/gp32/console/uart.c
delete mode 100644 c/src/lib/libbsp/arm/gp32/include/bsp.h
delete mode 100644 c/src/lib/libbsp/arm/gp32/make/custom/gp32.cfg
delete mode 100644 c/src/lib/libbsp/arm/gp32/preinstall.am
delete mode 100644 c/src/lib/libbsp/arm/gp32/smc/smc.c
delete mode 100644 c/src/lib/libbsp/arm/gp32/smc/smc.h
delete mode 100644 c/src/lib/libbsp/arm/gp32/start/start.S
delete mode 100644 c/src/lib/libbsp/arm/gp32/startup/bspidle.c
delete mode 100644 c/src/lib/libbsp/arm/gp32/startup/bspreset.c
delete mode 100644 c/src/lib/libbsp/arm/gp32/startup/bspstart.c
delete mode 100644 c/src/lib/libbsp/arm/gp32/startup/linkcmds
delete mode 100644 c/src/lib/libbsp/arm/gp32/startup/memmap.c
diff --git a/c/src/lib/libbsp/arm/acinclude.m4 b/c/src/lib/libbsp/arm/acinclude.m4
index 3a70e0a..f9c4c2f 100644
--- a/c/src/lib/libbsp/arm/acinclude.m4
+++ b/c/src/lib/libbsp/arm/acinclude.m4
@@ -14,8 +14,6 @@ AC_DEFUN([RTEMS_CHECK_BSPDIR],
AC_CONFIG_SUBDIRS([edb7312]);;
gdbarmsim )
AC_CONFIG_SUBDIRS([gdbarmsim]);;
- gp32 )
- AC_CONFIG_SUBDIRS([gp32]);;
gumstix )
AC_CONFIG_SUBDIRS([gumstix]);;
lm3s69xx )
diff --git a/c/src/lib/libbsp/arm/gp32/Makefile.am b/c/src/lib/libbsp/arm/gp32/Makefile.am
deleted file mode 100644
index 1eeb839..0000000
--- a/c/src/lib/libbsp/arm/gp32/Makefile.am
+++ /dev/null
@@ -1,68 +0,0 @@
-ACLOCAL_AMFLAGS = -I ../../../../aclocal
-
-include $(top_srcdir)/../../../../automake/compile.am
-
-include_bspdir = $(includedir)/bsp
-
-dist_project_lib_DATA = bsp_specs
-
-include_HEADERS = include/bsp.h
-include_HEADERS += smc/smc.h
-include_HEADERS += ../../shared/include/tm27.h
-
-include_bsp_HEADERS =
-
-nodist_include_HEADERS = include/bspopts.h
-nodist_include_bsp_HEADERS = ../../shared/include/bootcard.h
-DISTCLEANFILES = include/bspopts.h
-
-nodist_include_HEADERS += ../../shared/include/coverhd.h
-
-noinst_LIBRARIES = libbspstart.a
-libbspstart_a_SOURCES = start/start.S
-project_lib_DATA = start.$(OBJEXT)
-
-dist_project_lib_DATA += startup/linkcmds
-
-noinst_LIBRARIES += libbsp.a
-libbsp_a_SOURCES =
-
-# startup
-libbsp_a_SOURCES += ../../shared/bsplibc.c ../../shared/bsppost.c \
- ../../shared/bsppredriverhook.c ../../shared/bspgetworkarea.c \
- startup/bspstart.c startup/bspidle.c \
- ../../shared/bspclean.c startup/bspreset.c \
- startup/memmap.c ../../shared/bootcard.c ../../shared/sbrk.c \
- ../../shared/gnatinstallhandler.c
-libbsp_a_SOURCES += ../../shared/cpucounterread.c
-libbsp_a_SOURCES += ../../shared/cpucounterdiff.c
-# console
-libbsp_a_SOURCES += console/uart.c ../../shared/console.c \
- ../../shared/console_select.c ../../shared/console_control.c \
- ../../shared/console_read.c ../../shared/console_write.c
-# IRQ
-include_bsp_HEADERS += ../../shared/include/irq-generic.h \
- ../../shared/include/irq-info.h
-libbsp_a_SOURCES += ../../shared/src/irq-default-handler.c
-libbsp_a_SOURCES += ../../shared/src/irq-generic.c
-libbsp_a_SOURCES += ../../shared/src/irq-info.c
-libbsp_a_SOURCES += ../../shared/src/irq-legacy.c
-libbsp_a_SOURCES += ../../shared/src/irq-server.c
-libbsp_a_SOURCES += ../../shared/src/irq-shell.c
-# abort
-libbsp_a_SOURCES += ../shared/abort/abort.c
-# smc
-libbsp_a_SOURCES += smc/smc.c smc/smc.h
-
-# Cache
-libbsp_a_SOURCES += ../../../libcpu/shared/src/cache_manager.c
-libbsp_a_SOURCES += ../../shared/include/cache_.h
-libbsp_a_CPPFLAGS = -I$(srcdir)/../../shared/include
-
-libbsp_a_LIBADD = ../../../libcpu/@RTEMS_CPU@/shared/arm920.rel \
- ../../../libcpu/@RTEMS_CPU@/s3c24xx/clock.rel \
- ../../../libcpu/@RTEMS_CPU@/s3c24xx/timer.rel \
- ../../../libcpu/@RTEMS_CPU@/s3c24xx/irq.rel
-
-include $(srcdir)/preinstall.am
-include $(top_srcdir)/../../../../automake/local.am
diff --git a/c/src/lib/libbsp/arm/gp32/README b/c/src/lib/libbsp/arm/gp32/README
deleted file mode 100644
index 0189a3e..0000000
--- a/c/src/lib/libbsp/arm/gp32/README
+++ /dev/null
@@ -1,3 +0,0 @@
-This is the BSP for GamePark's GP32, a single board
-computer using the Samsung S3C2400 SoC CPU.
-
diff --git a/c/src/lib/libbsp/arm/gp32/bsp_specs b/c/src/lib/libbsp/arm/gp32/bsp_specs
deleted file mode 100644
index 32c105f..0000000
--- a/c/src/lib/libbsp/arm/gp32/bsp_specs
+++ /dev/null
@@ -1,13 +0,0 @@
-%rename endfile old_endfile
-%rename startfile old_startfile
-%rename link old_link
-
-*startfile:
-%{!qrtems: %(old_startfile)} \
-%{!nostdlib: %{qrtems: start.o%s crti.o%s crtbegin.o%s -e _start}}
-
-*link:
-%{!qrtems: %(old_link)} %{qrtems: -dc -dp -N}
-
-*endfile:
-%{!qrtems: %(old_endfiles)} %{qrtems: crtend.o%s crtn.o%s }
diff --git a/c/src/lib/libbsp/arm/gp32/configure.ac b/c/src/lib/libbsp/arm/gp32/configure.ac
deleted file mode 100644
index 0697f58..0000000
--- a/c/src/lib/libbsp/arm/gp32/configure.ac
+++ /dev/null
@@ -1,23 +0,0 @@
-## Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.69])
-AC_INIT([rtems-c-src-lib-libbsp-arm-gp32],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
-AC_CONFIG_SRCDIR([bsp_specs])
-RTEMS_TOP(../../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])
-RTEMS_BSP_CONFIGURE
-
-RTEMS_PROG_CC_FOR_TARGET
-RTEMS_CANONICALIZE_TOOLS
-RTEMS_PROG_CCAS
-
-RTEMS_CHECK_NETWORKING
-AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
-
-RTEMS_BSP_CLEANUP_OPTIONS(0, 1)
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff --git a/c/src/lib/libbsp/arm/gp32/console/uart.c b/c/src/lib/libbsp/arm/gp32/console/uart.c
deleted file mode 100644
index 9878c33..0000000
--- a/c/src/lib/libbsp/arm/gp32/console/uart.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * console driver for S3C2400 UARTs
- *
- * This driver uses the shared console driver in
- * ...../libbsp/shared/console.c
- *
- * If you want the driver to be interrupt driven, you
- * need to write the ISR, and in the ISR insert the
- * chars into termios's queue.
- *
- * Copyright (c) 2004 Cogent Computer Systems
- * Written by Jay Monkman <jtm at lopingdog.com>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
-*/
-#include <bsp.h> /* Must be before libio.h */
-#include <rtems/libio.h>
-#include <termios.h>
-#include <rtems/bspIo.h>
-
-/* Put the CPU (or UART) specific header file #include here */
-#include <s3c24xx.h>
-#include <libchip/serial.h>
-#include <libchip/sersupp.h>
-
-/* How many serial ports? */
-#define NUM_DEVS 1
-
-int uart_poll_read(int minor);
-
-int dbg_dly;
-
-/* static function prototypes */
-static int uart_first_open(int major, int minor, void *arg);
-static int uart_last_close(int major, int minor, void *arg);
-static int uart_read(int minor);
-static ssize_t uart_write(int minor, const char *buf, size_t len);
-static void uart_init(int minor);
-static void uart_write_polled(int minor, char c);
-static int uart_set_attributes(int minor, const struct termios *t);
-
-/* These are used by code in console.c */
-unsigned long Console_Configuration_Count = NUM_DEVS;
-
-/* Pointers to functions for handling the UART. */
-const console_fns uart_fns =
-{
- libchip_serial_default_probe,
- uart_first_open,
- uart_last_close,
- uart_read,
- uart_write,
- uart_init,
- uart_write_polled, /* not used in this driver */
- uart_set_attributes,
- FALSE /* TRUE if interrupt driven, FALSE if not. */
-};
-
-/*
- * There's one item in array for each UART.
- *
- * Some of these fields are marked "NOT USED". They are not used
- * by console.c, but may be used by drivers in libchip
- *
- */
-console_tbl Console_Configuration_Ports[] = {
- {
- "/dev/com0", /* sDeviceName */
- SERIAL_CUSTOM, /* deviceType */
- &uart_fns, /* pDeviceFns */
- NULL, /* deviceProbe */
- NULL, /* pDeviceFlow */
- 0, /* ulMargin - NOT USED */
- 0, /* ulHysteresis - NOT USED */
- NULL, /* pDeviceParams */
- 0, /* ulCtrlPort1 - NOT USED */
- 0, /* ulCtrlPort2 - NOT USED */
- 0, /* ulDataPort - NOT USED */
- NULL, /* getRegister - NOT USED */
- NULL, /* setRegister - NOT USED */
- NULL, /* getData - NOT USED */
- NULL, /* setData - NOT USED */
- 0, /* ulClock - NOT USED */
- 0 /* ulIntVector - NOT USED */
- }
-};
-
-/*********************************************************************/
-/* Functions called via termios callbacks (i.e. the ones in uart_fns */
-/*********************************************************************/
-
-/*
- * This is called the first time each device is opened. If the driver
- * is interrupt driven, you should enable interrupts here. Otherwise,
- * it's probably safe to do nothing.
- *
- * Since micromonitor already set up the UART, we do nothing.
- */
-static int uart_first_open(int major, int minor, void *arg)
-{
- return 0;
-}
-
-
-/*
- * This is called the last time each device is closed. If the driver
- * is interrupt driven, you should disable interrupts here. Otherwise,
- * it's probably safe to do nothing.
- */
-static int uart_last_close(int major, int minor, void *arg)
-{
- return 0;
-}
-
-
-/*
- * Read one character from UART.
- *
- * Return -1 if there's no data, otherwise return
- * the character in lowest 8 bits of returned int.
- */
-static int uart_read(int minor)
-{
- char c;
-
- if (minor == 0) {
- if (rUTRSTAT0 & 0x1) {
- c = rURXH0 & 0xff;
- return c;
- } else {
- return -1;
- }
- } else {
- printk("Unknown console minor number: %d\n", minor);
- return -1;
- }
-
-}
-
-
-/*
- * Write buffer to UART
- *
- * return 1 on success, -1 on error
- */
-static ssize_t uart_write(int minor, const char *buf, size_t len)
-{
- int i;
-
- if (minor == 0) {
- for (i = 0; i < len; i++) {
- /* Wait for fifo to have room */
- while(!(rUTRSTAT0 & 0x2)) {
- continue;
- }
-
- rUTXH0 = (char) buf[i];
- }
- } else {
- printk("Unknown console minor number: %d\n", minor);
- return -1;
- }
-
- return 1;
-}
-
-
-/* Set up the UART. */
-static void uart_init(int minor)
-{
- int i;
- unsigned int reg = 0;
-
- /* enable UART0 */
- rCLKCON|=0x100;
-
- /* value is calculated so : (int)(PCLK/16./baudrate) -1 */
- reg = get_PCLK() / (16 * 115200) - 1;
-
- /* FIFO enable, Tx/Rx FIFO clear */
- rUFCON0 = 0x07;
- rUMCON0 = 0x0;
- /* Normal,No parity,1 stop,8 bit */
- rULCON0 = 0x3;
- /*
- * tx=level,rx=edge,disable timeout int.,enable rx error int.,
- * normal,interrupt or polling
- */
- rUCON0 = 0x245;
- rUBRDIV0 = reg;
-
- for (i = 0; i < 100; i++);
-
-}
-
-/* I'm not sure this is needed for the shared console driver. */
-static void uart_write_polled(int minor, char c)
-{
- uart_write(minor, &c, 1);
-}
-
-/* This is for setting baud rate, bits, etc. */
-static int uart_set_attributes(int minor, const struct termios *t)
-{
- return 0;
-}
-
-/***********************************************************************/
-/*
- * The following functions are not used by TERMIOS, but other RTEMS
- * functions use them instead.
- */
-/***********************************************************************/
-/*
- * Read from UART. This is used in the exit code, and can't
- * rely on interrupts.
-*/
-int uart_poll_read(int minor)
-{
- return uart_read(minor);
-}
-
-
-/*
- * Write a character to the console. This is used by printk() and
- * maybe other low level functions. It should not use interrupts or any
- * RTEMS system calls. It needs to be very simple
- */
-static void _BSP_put_char( char c ) {
- uart_write_polled(0, c);
- if (c == '\n') {
- uart_write_polled(0, '\r');
- }
-}
-
-BSP_output_char_function_type BSP_output_char = _BSP_put_char;
-
-static int _BSP_get_char(void)
-{
- return uart_poll_read(0);
-}
-
-BSP_polling_getchar_function_type BSP_poll_char = _BSP_get_char;
diff --git a/c/src/lib/libbsp/arm/gp32/include/bsp.h b/c/src/lib/libbsp/arm/gp32/include/bsp.h
deleted file mode 100644
index 7c8903f..0000000
--- a/c/src/lib/libbsp/arm/gp32/include/bsp.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/**
- * @file
- * @ingroup arm_gp32
- * @brief Global BSP definitons.
- */
-
-/*
- * Copyright (c) Canon Research France SA.]
- * Emmanuel Raguet, mailto:raguet at crf.canon.fr
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef LIBBSP_ARM_GP32_BSP_H
-#define LIBBSP_ARM_GP32_BSP_H
-
-#include <bspopts.h>
-#include <bsp/default-initial-extension.h>
-
-#include <rtems.h>
-#include <rtems/iosupp.h>
-#include <rtems/console.h>
-#include <rtems/clockdrv.h>
-#include <s3c24xx.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define BSP_FEATURE_IRQ_EXTENSION
-
-#define gp32_initButtons() {rPBCON=0x0;}
-#define gp32_getButtons() \
- ( (((~rPEDAT >> 6) & 0x3 )<<8) | (((~rPBDAT >> 8) & 0xFF)<<0) )
-
-/**
- * @defgroup arm_gp32 GP32 Support
- * @ingroup bsp_arm
- * @brief GP32 Support Pacakge
- * @{
- */
-
-/**
- * @brief functions to get the differents s3c2400 clks
- * @{
- */
-
-uint32_t get_FCLK(void);
-uint32_t get_HCLK(void);
-uint32_t get_PCLK(void);
-uint32_t get_UCLK(void);
-
-/** @} */
-
-void gp32_setPalette( unsigned char pos, uint16_t color);
-
-/* What is the input clock freq in hertz? */
-/** @brief 12 MHz oscillator */
-#define BSP_OSC_FREQ 12000000
-/** @brief FCLK=133Mhz */
-#define M_MDIV 81
-#define M_PDIV 2
-#define M_SDIV 1
-/** @brief HCLK=FCLK/2, PCLK=FCLK/2 */
-#define M_CLKDIVN 2
-/** @brief enable refresh */
-#define REFEN 0x1
-/** @brief CBR(CAS before RAS)/auto refresh */
-#define TREFMD 0x0
-/** @brief 2 clk */
-#define Trp 0x0
-/** @brief 7 clk */
-#define Trc 0x3
-/** @brief 3 clk */
-#define Tchr 0x2
-
-/**
- * @brief This BSP provides its own IDLE thread to override the RTEMS one.
- *
- * So we prototype it and define the constant confdefs.h expects
- * to configure a BSP specific one.
- */
-void *bsp_idle_thread(uintptr_t ignored);
-
-/** @} */
-
-#define BSP_IDLE_TASK_BODY bsp_idle_thread
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _BSP_H */
-
diff --git a/c/src/lib/libbsp/arm/gp32/make/custom/gp32.cfg b/c/src/lib/libbsp/arm/gp32/make/custom/gp32.cfg
deleted file mode 100644
index be48c0d..0000000
--- a/c/src/lib/libbsp/arm/gp32/make/custom/gp32.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Config file for ARM GP32
-#
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-RTEMS_CPU=arm
-RTEMS_CPU_MODEL=s3c2400
-
-# This contains the compiler options necessary to select the CPU model
-# and (hopefully) optimize for it.
-#
-CPU_CFLAGS = -mcpu=arm920t -DCPU_S3C2400
-
-# optimize flag: typically -O2
-CFLAGS_OPTIMIZE_V = -O2 -g
-
-define bsp-post-link
- $(OBJCOPY) -O binary $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT)
- $(default-bsp-post-link)
-endef
diff --git a/c/src/lib/libbsp/arm/gp32/preinstall.am b/c/src/lib/libbsp/arm/gp32/preinstall.am
deleted file mode 100644
index 1d72ddf..0000000
--- a/c/src/lib/libbsp/arm/gp32/preinstall.am
+++ /dev/null
@@ -1,79 +0,0 @@
-## Automatically generated by ampolish3 - Do not edit
-
-if AMPOLISH3
-$(srcdir)/preinstall.am: Makefile.am
- $(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am
-endif
-
-PREINSTALL_DIRS =
-DISTCLEANFILES += $(PREINSTALL_DIRS)
-
-all-am: $(PREINSTALL_FILES)
-
-PREINSTALL_FILES =
-CLEANFILES = $(PREINSTALL_FILES)
-
-all-local: $(TMPINSTALL_FILES)
-
-TMPINSTALL_FILES =
-CLEANFILES += $(TMPINSTALL_FILES)
-
-$(PROJECT_LIB)/$(dirstamp):
- @$(MKDIR_P) $(PROJECT_LIB)
- @: > $(PROJECT_LIB)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/$(dirstamp):
- @$(MKDIR_P) $(PROJECT_INCLUDE)
- @: > $(PROJECT_INCLUDE)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/bsp/$(dirstamp):
- @$(MKDIR_P) $(PROJECT_INCLUDE)/bsp
- @: > $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-
-$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
-PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
-
-$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
-
-$(PROJECT_INCLUDE)/smc.h: smc/smc.h $(PROJECT_INCLUDE)/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/smc.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/smc.h
-
-$(PROJECT_INCLUDE)/tm27.h: ../../shared/include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
-
-$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
-
-$(PROJECT_INCLUDE)/bsp/bootcard.h: ../../shared/include/bootcard.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/bootcard.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/bootcard.h
-
-$(PROJECT_INCLUDE)/coverhd.h: ../../shared/include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h
-
-$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT)
-TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT)
-
-$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
-PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds
-
-$(PROJECT_INCLUDE)/bsp/irq-generic.h: ../../shared/include/irq-generic.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq-generic.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq-generic.h
-
-$(PROJECT_INCLUDE)/bsp/irq-info.h: ../../shared/include/irq-info.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq-info.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq-info.h
-
diff --git a/c/src/lib/libbsp/arm/gp32/smc/smc.c b/c/src/lib/libbsp/arm/gp32/smc/smc.c
deleted file mode 100644
index 3b8d5e2..0000000
--- a/c/src/lib/libbsp/arm/gp32/smc/smc.c
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * s3c2400 smc disk block device implementation
- *
- * Squidge's SMC Low-level access routines.
- * Inspired and derived from routines provided by Samsung Electronics
- * M/M R&D Center & FireFly.
- */
-
-#include <rtems.h>
-#include <rtems/libio.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <inttypes.h>
-
-#include "rtems/blkdev.h"
-#include "rtems/diskdevs.h"
-#include "smc.h"
-#include <rtems/bspIo.h>
-#include <s3c24xx.h>
-
-#define SMC_DEVICE_NAME "/dev/smc"
-#define SMC_SAMSUNG_ID 0xEC
-#define SMC_TOSHIBA_ID 0x98
-
-#define SMC_16MB 0x73
-#define SMC_32MB 0x75
-#define SMC_64MB 0x76
-#define SMC_128MB 0x79
-
-#define LBA_UNUSED 0x80000000
-#define LBA_RESERVED 0x80000001
-
-#define BLOCK_UNUSED 0x80000000
-#define BLOCK_RESERVED 0x80000001
-
-/* SmartMedia Command */
-#define SEQ_DATA_INPUT_CMD 0x80
-#define READ1_CMD 0x00
-#define READ1_1_CMD 0x01
-#define READ2_CMD 0x50
-#define READ_ID_CMD 0x90
-#define RESET_CMD 0xFF
-#define PAGE_PROGRAM_CMD 0x10
-#define BLOCK_ERASE_CMD 0x60
-#define BLOCK_ERASE_CFM_CMD 0xD0
-#define READ_STATUS_CMD 0x70
-#define RESET_PTR_CMD 0x00
-
-
-/* Internal SMC disk descriptor */
-struct SMC_INFO {
- uint8_t id[3];
- uint32_t bytes_per_page;
- uint32_t pages_per_block;
- uint32_t blocks;
- uint32_t mb;
-};
-
-/* Ths S3c2410 uses a different register map */
-#ifdef CPU_S3C2410
-#define rPBDAT rGPBDAT
-#define rPBCON rGPBCON
-#define rPDDAT rGPDDAT
-#define rPEDAT rGPEDAT
-#endif
-
-
-static struct SMC_INFO smc_info;
-
-uint32_t smc_l2p[0x2000];
-uint32_t smc_p2l[0x2000];
-
-#define sm_busy() while (!(rPDDAT & 0x200))
-#define sm_chip_en() rPDDAT &= (~0x80)
-#define sm_chip_dis() rPDDAT |= 0x80
-#define sm_cle_en() rPEDAT |= 0x20
-#define sm_cle_dis() rPEDAT &= (~0x20)
-#define sm_ale_en() rPEDAT |= 0x10
-#define sm_ale_dis() rPEDAT &= (~0x10)
-#define sm_wp_en() rPDDAT &= (~0x40)
-#define sm_wp_dis() rPDDAT |= 0x40
-#define sm_read_en() rPBCON &= 0xFFFF0000
-#define sm_read_dis() rPBCON = (rPBCON & 0xFFFF0000) | 0x5555
-#define sm_write_en() sm_read_dis()
-#define sm_write_dis() sm_read_en()
-
-static void sm_write( uint8_t data)
-{
- rPBDAT = (rPBDAT & 0xFF00) | data;
- rPEDAT &= (~0x08);
- rPEDAT |= 0x08;
-}
-
-static uint8_t sm_read(void)
-{
- uint8_t data;
-
- rPDDAT &= (~0x100);
- data = rPBDAT & 0xFF;
- rPDDAT |= 0x100;
- return data;
-}
-
-static void smc_read_id( uint8_t* buf, uint32_t length)
-{
- uint32_t i;
-
- sm_chip_en();
-
- sm_cle_en();
- sm_write_en();
- sm_write(READ_ID_CMD);
- sm_write_dis();
- sm_cle_dis();
-
- sm_ale_en();
- sm_write_en();
- sm_write( 0);
- sm_write_dis();
- sm_ale_dis();
-
- sm_read_en();
- for (i=0;i<length;i++) *(buf+i) = sm_read();
- sm_read_dis();
-
- sm_chip_dis();
-}
-
-/* read an entire logical page of 512 bytes.*/
-static uint8_t smc_read_page (uint32_t lpage, uint8_t* buf)
-{
- uint32_t block, page, i;
-
- /* convert logical block to physical block
- and then convert into page suitable for read1 command...
- */
- block = lpage >> 5;
- if (smc_l2p[block] < LBA_UNUSED) {
- page = smc_l2p[block] << 5;
- page += (lpage & 0x1F);
- }
- else
- return 0;
-
- sm_chip_en();
-
- sm_cle_en();
- sm_write_en();
- sm_write(READ1_CMD);
- sm_write_dis();
- sm_cle_dis();
-
- sm_ale_en();
- sm_write_en();
- sm_write( 0x00);
- sm_write( (uint8_t)(page >> 0));
- sm_write( (uint8_t)(page >> 8));
- if (smc_info.mb >= 64)
- sm_write( (uint8_t)(page >> 16));
- sm_write_dis();
- sm_ale_dis();
-
- sm_busy();
-
- sm_read_en();
- for (i = 0; i < 512; i++) {
- *buf = sm_read();
- buf++;
- }
- sm_read_dis();
- sm_chip_dis();
-
- sm_busy();
- return 1;
-}
-
-static void smc_read_spare( uint32_t page, uint8_t* buf, uint8_t length)
-{
- uint32_t i;
-
- sm_chip_en();
-
- sm_cle_en();
- sm_read_dis();
- sm_write(READ2_CMD);
- sm_read_en();
- sm_cle_dis();
-
- sm_ale_en();
- sm_read_dis();
- sm_write( 0x00);
- sm_write( (uint8_t)(page >> 0));
- sm_write( (uint8_t)(page >> 8));
- if (smc_info.mb >= 64)
- sm_write( (uint8_t)(page >> 16));
- sm_read_en();
- sm_ale_dis();
-
- sm_busy();
-
- sm_read_en();
- for (i=0;i<length;i++)
- *(buf+i) = sm_read();
- sm_read_dis();
-
- sm_chip_dis();
-
-}
-
-static void smc_make_l2p(void)
-{
- uint32_t pblock, i, j, lblock, zone, count, cnt1, cnt2, cnt3;
- uint8_t data[512];
-
- cnt1 = 0;
- cnt2 = 0;
- cnt3 = 0;
-
- for (i=0;i<0x2000;i++) {
- smc_l2p[i] = LBA_RESERVED;
- smc_p2l[i] = BLOCK_RESERVED;
- }
-
- for (pblock=0;pblock<smc_info.blocks;pblock++) {
- /* read physical block - first page */
- smc_read_spare( pblock*smc_info.pages_per_block, (uint8_t*)&data, 16);
-
- zone = pblock >> 10; /* divide by 1024 to get zone */
- if ((data[5] == 0xFF) && ((data[6]&0xF8) == 0x10)) {
- lblock = ((((data[6]<<8)|(data[7]<<0)) >> 1) & 0x03FF) + (zone * 1000);
- smc_l2p[lblock] = pblock;
- smc_p2l[pblock] = lblock;
- cnt1++;
- } else {
- count = 0;
- for (j=0;j<16;j++) {
- if (data[j] == 0xFF) count++;
- }
- if (count == 16) {
- smc_p2l[pblock] = BLOCK_UNUSED;
- cnt2++;
- } else {
- smc_p2l[pblock] = BLOCK_RESERVED;
- cnt3++;
- }
- }
- }
-}
-
-
-static void smc_detect( uint8_t id1, uint8_t id2, uint8_t id3)
-{
- smc_info.id[0] = id1;
- smc_info.id[1] = id2;
- smc_info.id[2] = id3;
- smc_info.mb = 0;
- smc_info.bytes_per_page = 0;
- smc_info.pages_per_block = 0;
- smc_info.blocks = 0;
-
- switch (id1) {
- case SMC_SAMSUNG_ID:
- case SMC_TOSHIBA_ID: {
- switch (id2) {
- case SMC_16MB : smc_info.mb = 16; break;
- case SMC_32MB : smc_info.mb = 32; break;
- case SMC_64MB : smc_info.mb = 64; break;
- case SMC_128MB : smc_info.mb = 128; break;
- }
- break;
- }
- }
-
- switch (smc_info.mb) {
- case 16 : smc_info.bytes_per_page = 512; smc_info.pages_per_block = 32; smc_info.blocks = 0x0400; break;
- case 32 : smc_info.bytes_per_page = 512; smc_info.pages_per_block = 32; smc_info.blocks = 0x0800; break;
- case 64 : smc_info.bytes_per_page = 512; smc_info.pages_per_block = 32; smc_info.blocks = 0x1000; break;
- case 128 : smc_info.bytes_per_page = 512; smc_info.pages_per_block = 32; smc_info.blocks = 0x2000; break;
- }
-}
-
-static void smc_init( void)
-{
- unsigned char buf[32];
- int i;
-
- /* reset smc */
- sm_chip_en();
- sm_cle_en();
- sm_write_en();
- sm_write(0xFF);
- sm_write_dis();
- sm_cle_dis();
- for(i=0;i<10;i++);
- sm_busy();
- sm_chip_dis();
-
- smc_read_id (buf, 4);
- smc_detect (buf[0], buf[1], buf[2]);
- printk ("SMC: [%02X-%02X-%02X-%02X]\n", buf[0], buf[1], buf[2], buf[3]);
- printk ("SMC size: %dMB detected\n",smc_info.mb);
- smc_make_l2p();
-}
-
-/* smc_write --
- * write stub
- */
-static int smc_write(rtems_blkdev_request *req)
-{
- rtems_blkdev_request_done(req, RTEMS_SUCCESSFUL);
- return 0;
-}
-
-
-/* smc_read --
- * PARAMETERS:
- * req - pointer to the READ block device request info
- *
- * RETURNS:
- * ioctl return value
- */
-static int
-smc_read(rtems_blkdev_request *req)
-{
- uint32_t i;
- rtems_blkdev_sg_buffer *sg;
- uint32_t remains;
-
- remains = smc_info.bytes_per_page * req->bufnum;
- sg = req->bufs;
- for (i = 0; (remains > 0) && (i < req->bufnum); i++, sg++)
- {
- int count = sg->length;
- if (count > remains)
- count = remains;
- smc_read_page(sg->block,sg->buffer);
- remains -= count;
- }
- rtems_blkdev_request_done(req, RTEMS_SUCCESSFUL);
- return 0;
-}
-
-/* smc_ioctl --
- * IOCTL handler for SMC device.
- *
- * PARAMETERS:
- * dev - device number (major, minor number)
- * req - IOCTL request code
- * argp - IOCTL argument
- *
- * RETURNS:
- * IOCTL return value
- */
-static int
-smc_ioctl(rtems_disk_device *dd, uint32_t req, void *argp)
-{
- switch (req)
- {
- case RTEMS_BLKIO_REQUEST:
- {
- rtems_blkdev_request *r = argp;
- switch (r->req)
- {
- case RTEMS_BLKDEV_REQ_READ:
- return smc_read(r);
- case RTEMS_BLKDEV_REQ_WRITE:
- return smc_write(r);
- default:
- errno = EINVAL;
- return -1;
- }
- break;
- }
-
- default:
- errno = EINVAL;
- return -1;
- }
-}
-
-/* smc_initialize --
- * RAM disk device driver initialization. Run through RAM disk
- * configuration information and configure appropriate RAM disks.
- *
- * PARAMETERS:
- * major - RAM disk major device number
- * minor - minor device number, not applicable
- * arg - initialization argument, not applicable
- *
- * RETURNS:
- * none
- */
-rtems_device_driver
-smc_initialize(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void *arg)
-{
- rtems_status_code rc;
- dev_t dev;
- uint32_t block_num;
-
- rc = rtems_disk_io_initialize();
- if (rc != RTEMS_SUCCESSFUL)
- return rc;
-
- smc_init();
- block_num = smc_info.blocks << 5;
-
- dev = rtems_filesystem_make_dev_t(major, 0);
- rc = rtems_disk_create_phys(dev, 512, block_num,
- smc_ioctl, NULL, SMC_DEVICE_NAME);
-
- return RTEMS_SUCCESSFUL;
-}
diff --git a/c/src/lib/libbsp/arm/gp32/smc/smc.h b/c/src/lib/libbsp/arm/gp32/smc/smc.h
deleted file mode 100644
index 19600e8..0000000
--- a/c/src/lib/libbsp/arm/gp32/smc/smc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/**
- * @file
- * @ingroup gp32_smc
- * @brief SMC disk driver initialization entry point
- */
-
-#ifndef __SMC_H__
-#define __SMC_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <rtems.h>
-
-#include "rtems/blkdev.h"
-
-/**
- * @defgroup gp32_smc SMC Disk Driver
- * @ingroup arm_gp32
- * @brief SMC Disk Driver Support
- * @{
- */
-
-/**
- * @brief smc_initialize
- * SMC disk driver initialization entry point.
- */
-rtems_device_driver
-smc_initialize(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void *arg);
-
-#define SMC_DRIVER_TABLE_ENTRY \
- { smc_initialize, GENERIC_BLOCK_DEVICE_DRIVER_ENTRIES }
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/c/src/lib/libbsp/arm/gp32/start/start.S b/c/src/lib/libbsp/arm/gp32/start/start.S
deleted file mode 100644
index 41b46c8..0000000
--- a/c/src/lib/libbsp/arm/gp32/start/start.S
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * GP32 startup code
- */
-
-/*
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp/linker-symbols.h>
-
-/* Some standard definitions...*/
-.equ PSR_MODE_USR, 0x10
-.equ PSR_MODE_FIQ, 0x11
-.equ PSR_MODE_IRQ, 0x12
-.equ PSR_MODE_SVC, 0x13
-.equ PSR_MODE_ABT, 0x17
-.equ PSR_MODE_UNDEF, 0x1B
-.equ PSR_MODE_SYS, 0x1F
-
-.equ PSR_I, 0x80
-.equ PSR_F, 0x40
-.equ PSR_T, 0x20
-
-.text
-.globl _start
-_start:
- b _start2
-
- at ---------------------------------------------------------------------------------
-@ AXF addresses
- at ---------------------------------------------------------------------------------
- .word bsp_section_text_begin
- .word bsp_section_rodata_end
- .word bsp_section_data_begin
- .word bsp_section_bss_end
- .word bsp_section_bss_begin
- .word bsp_section_bss_end
-
- at ---------------------------------------------------------------------------------
-@ GamePark magic sequence
- at ---------------------------------------------------------------------------------
- .word 0x44450011
- .word 0x44450011
- .word 0x01234567
- .word 0x12345678
- .word 0x23456789
- .word 0x34567890
- .word 0x45678901
- .word 0x56789012
- .word 0x23456789
- .word 0x34567890
- .word 0x45678901
- .word 0x56789012
- .word 0x23456789
- .word 0x34567890
- .word 0x45678901
- .word 0x56789012
-
- at ---------------------------------------------------------------------------------
-_start2:
- at ---------------------------------------------------------------------------------
-
- /*
- * Since I don't plan to return to the bootloader,
- * I don't have to save the registers.
- *
- * I'll just set the CPSR for SVC mode, interrupts
- * off, and ARM instructions.
- */
- mov r0, #(PSR_MODE_SVC | PSR_I | PSR_F)
- msr cpsr, r0
-
- /* --- Initialize stack pointer registers */
- /* Enter IRQ mode and set up the IRQ stack pointer */
- mov r0, #(PSR_MODE_IRQ | PSR_I | PSR_F) /* No interrupts */
- msr cpsr, r0
- ldr r1, =bsp_stack_irq_size
- ldr sp, =bsp_stack_irq_begin
- add sp, sp, r1
-
- /* Enter FIQ mode and set up the FIQ stack pointer */
- mov r0, #(PSR_MODE_FIQ | PSR_I | PSR_F) /* No interrupts */
- msr cpsr, r0
- ldr r1, =bsp_stack_fiq_size
- ldr sp, =bsp_stack_fiq_begin
- add sp, sp, r1
-
- /* Enter ABT mode and set up the ABT stack pointer */
- mov r0, #(PSR_MODE_ABT | PSR_I | PSR_F) /* No interrupts */
- msr cpsr, r0
- ldr r1, =bsp_stack_abt_size
- ldr sp, =bsp_stack_abt_begin
- add sp, sp, r1
-
- /* Set up the SVC stack pointer last and stay in SVC mode */
- mov r0, #(PSR_MODE_SVC | PSR_I | PSR_F) /* No interrupts */
- msr cpsr, r0
- ldr r1, =bsp_stack_svc_size
- ldr sp, =bsp_stack_svc_begin
- add sp, sp, r1
- sub sp, sp, #0x64
-
-
- /* disable mmu, I and D caches*/
- nop
- nop
- mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #0x01
- bic r0, r0, #0x04
- bic r0, r0, #0x01000
- mcr p15, 0, r0, c1, c0, 0
- nop
- nop
-
- /* clean data cache */
- mov r1,#0x00
-Loop1:
- mov r2,#0x00
-Loop2:
- mov r3, r2, lsl#26
- orr r3, r3, r1, lsl#5
- mcr p15, 0, r3, c7, c14, 2
- add r2, r2, #0x01
- cmp r2, #64
- bne Loop2
- add r1, r1, #0x01
- cmp r1, #8
- bne Loop1
-
-
- /*
- * Initialize the MMU. After we return, the MMU is enabled,
- * and memory may be remapped. I hope we don't remap this
- * memory away.
- */
- ldr r0, =mem_map
- bl mmu_init
-
- /*
- * Initialize the exception vectors. This includes the
- * exceptions vectors (0x00000000-0x0000001c), and the
- * pointers to the exception handlers (0x00000020-0x0000003c).
- */
- mov r0, #0
- adr r1, vector_block
- ldmia r1!, {r2-r9}
- stmia r0!, {r2-r9}
- ldmia r1!, {r2-r9}
- stmia r0!, {r2-r9}
-
- /* Now we are prepared to start the BSP's C code */
- mov r0, #0
- bl boot_card
-
- /*
- * Theoretically, we could return to what started us up,
- * but we'd have to have saved the registers and stacks.
- * Instead, we'll just reset.
- */
- bl bsp_reset
-
- /* We shouldn't get here. If we do, hang */
-_hang: b _hang
-
-
-/*
- * This is the exception vector table and the pointers to
- * the functions that handle the exceptions. It's a total
- * of 16 words (64 bytes)
- */
-vector_block:
- ldr pc, Reset_Handler
- ldr pc, Undefined_Handler
- ldr pc, SWI_Handler
- ldr pc, Prefetch_Handler
- ldr pc, Abort_Handler
- nop
- ldr pc, IRQ_Handler
- ldr pc, FIQ_Handler
-
-Reset_Handler: b bsp_reset
-Undefined_Handler: b Undefined_Handler
-SWI_Handler: b SWI_Handler
-Prefetch_Handler: b Prefetch_Handler
-Abort_Handler: b Abort_Handler
- nop
-IRQ_Handler: b IRQ_Handler
-FIQ_Handler: b FIQ_Handler
-
-.globl Reset_Handler
-.globl Undefined_Handler
-.globl SWI_Handler
-.globl Prefetch_Handler
-.globl Abort_Handler
-.globl IRQ_Handler
-.globl FIQ_Handler
diff --git a/c/src/lib/libbsp/arm/gp32/startup/bspidle.c b/c/src/lib/libbsp/arm/gp32/startup/bspidle.c
deleted file mode 100644
index 0f96f1f..0000000
--- a/c/src/lib/libbsp/arm/gp32/startup/bspidle.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * BSP specific Idle thread
- */
-
-/*
- * Copyright (c) 2000 Canon Research Centre France SA.
- * Emmanuel Raguet, mailto:raguet at crf.canon.fr
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-
-void *bsp_idle_thread(uintptr_t ignored)
-{
- while(1) {
- __asm__ volatile ("MCR p15,0,r0,c7,c0,4 \n");
- }
- return NULL;
-}
-
diff --git a/c/src/lib/libbsp/arm/gp32/startup/bspreset.c b/c/src/lib/libbsp/arm/gp32/startup/bspreset.c
deleted file mode 100644
index a9c3792..0000000
--- a/c/src/lib/libbsp/arm/gp32/startup/bspreset.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <bsp/bootcard.h>
-
-void bsp_reset(void)
-{
- rtems_interrupt_level level;
-
- (void) level;
- rtems_interrupt_disable(level);
- /* disable mmu, invalide i-cache and call swi #4 */
- __asm__ volatile(""
- "mrc p15,0,r0,c1,c0,0 \n"
- "bic r0,r0,#1 \n"
- "mcr p15,0,r0,c1,c0,0 \n"
- "nop \n"
- "nop \n"
- "nop \n"
- "nop \n"
- "nop \n"
- "mov r0,#0 \n"
- "MCR p15,0,r0,c7,c5,0 \n"
- "nop \n"
- "nop \n"
- "nop \n"
- "nop \n"
- "nop \n"
- "swi #4 "
- :
- :
- : "r0"
- );
- /* we should be back in bios now */
-}
diff --git a/c/src/lib/libbsp/arm/gp32/startup/bspstart.c b/c/src/lib/libbsp/arm/gp32/startup/bspstart.c
deleted file mode 100644
index 5002e57..0000000
--- a/c/src/lib/libbsp/arm/gp32/startup/bspstart.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * This file contains the ARM BSP startup package. It includes application,
- * board, and monitor specific initialization and configuration. The generic CPU
- * dependent initialization has been performed before this routine is invoked.
- */
-
-/*
- * Copyright (c) 2000 Canon Research Centre France SA.
- * Emmanuel Raguet, mailto:raguet at crf.canon.fr
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <bsp/irq-generic.h>
-#include <rtems/bspIo.h>
-#include <s3c24xx.h>
-
-/*
- * BSP Specific Initialization in C
- */
-static void bsp_start_default( void )
-{
- uint32_t cr;
- uint32_t pend,last;
- uint32_t REFCNT;
- int i;
-
- /* stop RTC */
- #ifdef CPU_S3C2400
- rTICINT = 0x0;
- #else
- rTICNT = 0x0;
- #endif
- /* stop watchdog,ADC and timers */
- rWTCON = 0x0;
- rTCON = 0x0;
- rADCCON = 0x0;
-
- /* disable interrupts */
- rINTMOD = 0x0;
- rINTMSK = BIT_ALLMSK; /* unmasked by drivers */
-
- last = 0;
- for(i=0; i<4; i++) {
- pend = rSRCPND;
- if(pend == 0 || pend == last)
- break;
- rSRCPND = pend;
- rINTPND = pend;
- last = pend;
- }
-
- /* setup clocks */
- rCLKDIVN = M_CLKDIVN;
- rMPLLCON = ((M_MDIV<<12)+(M_PDIV<<4)+M_SDIV);
- /* setup rREFRESH
- * period = 15.6 us, HCLK=66Mhz, (2048+1-15.6*66)
- */
- REFCNT = 2048+1-(15.6*get_HCLK()/1000000);
- rREFRESH = ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT);
-
- /* set prescaler for timers 2,3,4 to 16(15+1) */
- cr = rTCFG0 & 0xFFFF00FF;
- rTCFG0 = (cr | (15<<8));
-
- /* set prescaler for timers 0,1 to 1(0+1) */
- cr = rTCFG0 & 0xFFFFFF00;
- rTCFG0 = (cr | (0<<0));
-
- /*
- * Init rtems exceptions management
- */
- /* FIXME: Use shared start.S */
- rtems_exception_init_mngt();
-
- /*
- * Init rtems interrupt management
- */
- bsp_interrupt_initialize();
-}
-
-/*
- * By making this a weak alias for bsp_start_default, a brave soul
- * can override the actual bsp_start routine used.
- */
-void bsp_start (void) __attribute__ ((weak, alias("bsp_start_default")));
diff --git a/c/src/lib/libbsp/arm/gp32/startup/linkcmds b/c/src/lib/libbsp/arm/gp32/startup/linkcmds
deleted file mode 100644
index 6fcbe1a..0000000
--- a/c/src/lib/libbsp/arm/gp32/startup/linkcmds
+++ /dev/null
@@ -1,26 +0,0 @@
-MEMORY {
- SDRAM_MMU : ORIGIN = 0x0c000000, LENGTH = 16k
- SDRAM : ORIGIN = 0x0c004000, LENGTH = 7M - 16k
-}
-
-REGION_ALIAS ("REGION_START", SDRAM);
-REGION_ALIAS ("REGION_VECTOR", SDRAM);
-REGION_ALIAS ("REGION_TEXT", SDRAM);
-REGION_ALIAS ("REGION_TEXT_LOAD", SDRAM);
-REGION_ALIAS ("REGION_RODATA", SDRAM);
-REGION_ALIAS ("REGION_RODATA_LOAD", SDRAM);
-REGION_ALIAS ("REGION_DATA", SDRAM);
-REGION_ALIAS ("REGION_DATA_LOAD", SDRAM);
-REGION_ALIAS ("REGION_FAST_TEXT", SDRAM);
-REGION_ALIAS ("REGION_FAST_TEXT_LOAD", SDRAM);
-REGION_ALIAS ("REGION_FAST_DATA", SDRAM);
-REGION_ALIAS ("REGION_FAST_DATA_LOAD", SDRAM);
-REGION_ALIAS ("REGION_BSS", SDRAM);
-REGION_ALIAS ("REGION_WORK", SDRAM);
-REGION_ALIAS ("REGION_STACK", SDRAM);
-REGION_ALIAS ("REGION_NOCACHE", SDRAM);
-REGION_ALIAS ("REGION_NOCACHE_LOAD", SDRAM);
-
-_ttbl_base = ORIGIN (SDRAM_MMU);
-
-INCLUDE linkcmds.armv4
diff --git a/c/src/lib/libbsp/arm/gp32/startup/memmap.c b/c/src/lib/libbsp/arm/gp32/startup/memmap.c
deleted file mode 100644
index fec8a50..0000000
--- a/c/src/lib/libbsp/arm/gp32/startup/memmap.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * GP32 Memory Map
- *
- * Copyright (c) 2004 by Cogent Computer Systems
- * Written by Jay Monkman <jtm at lopingdog.com>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-#include <rtems.h>
-#include <libcpu/mmu.h>
-
-/* Remember, the ARM920 has 64 TLBs. If you have more 1MB sections than
- * that, you'll have TLB lookups, which could hurt performance.
- */
-mmu_sect_map_t mem_map[] = {
-/* <phys addr> <virt addr> <size> <flags> */
- {0x0c000000, 0x00000000, 1, MMU_CACHE_NONE}, /* SDRAM for vectors */
- {0x0c000000, 0x0c000000, 7, MMU_CACHE_WTHROUGH}, /* SDRAM W cache */
- {0x0c700000, 0x0c700000, 1, MMU_CACHE_NONE}, /* SDRAM W/O cache */
- {0x14000000, 0x14000000, 16, MMU_CACHE_NONE}, /* Internals Regs - */
- {0x15000000, 0x15000000, 16, MMU_CACHE_NONE}, /* Internal Regs - */
- {0x00000000, 0x00000000, 0, 0} /* The end */
-};
--
2.1.4
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
More information about the devel
mailing list