BSP Build Failures From GPIO

[Joel Sherrill]

Hi

I did a build sweep overnight on the master and a few BSPs have issues
with the GPIO additions.

arm-lpc1768_mbed_ahb_ram_eth
arm-lpc1768_mbed_ahb_ram
arm-lpc1768_mbed


In file included from ../../../../../../../../rtems/c/src/lib/libbsp/arm/lpc176x/gpio/gpio.c:25:0:
../../../../../.././lpc1768_mbed_ahb_ram_eth/lib/include/bsp/gpio.h:28:4: error: #error "BSP_GPIO_PIN_COUNT or BSP_GPIO_PINS_PER_BANK is not defined."
    #error "BSP_GPIO_PIN_COUNT or BSP_GPIO_PINS_PER_BANK is not defined."
     ^
../../../../../.././lpc1768_mbed_ahb_ram_eth/lib/include/bsp/gpio.h:32:4: error: #error "Invalid BSP_GPIO_PIN_COUNT or BSP_GPIO_PINS_PER_BANK."
    #error "Invalid BSP_GPIO_PIN_COUNT or BSP_GPIO_PINS_PER_BANK."
     ^
../../../../../.././lpc1768_mbed_ahb_ram_eth/lib/include/bsp/gpio.h:41:5: error: division by zero in #if
  #if GPIO_LAST_BANK_PINS > 0

Patches appreciated.

-- 
Joel Sherrill, Ph.D.             Director of Research & Development
joel.sherrill at OARcorp.com        On-Line Applications Research
Ask me about RTEMS: a free RTOS  Huntsville AL 35805
Support Available                (256) 722-9985