[PATCH] [RTEMS] Update RTEMS thread model

[Aurelio Remonda]

On Fri, Sep 11, 2015 at 11:34 AM, Joel Sherrill <joel.sherrill at oarcorp.com>
wrote:

>
>
> On 9/11/2015 9:21 AM, Aurelio Remonda wrote:
>
>> The test runners are in "sim-scripts" make sure a "realview_pbx_a9_qemu
>>> -i ticker.exe" produces the expected output.
>>>
>>
>> Hi, silly question here, running ticker gave me the elapsed times
>> but not in 'real time'. It prints 09:00:00, 09:00:04,..., 09:00:34
>> immediately. Is this a norma behaviour for this test in this BSP?
>>
>
> It is printing the "real time" but the time is set to a date early
> in the RTEMS development history. Look at the year. That's about the
> time the test was initially written.
>
> It is likely running faster than "real time" because it is a simulator.
> The numbers not ending in "5" is a bit unusual. The test consists of
> four tasks:
>
> + one runs every 5 seconds
> + one every 10
> + one every 15
> + IDLE
>
> It exits when one notices it has gone over 30 seconds.
>
>
Thank you Joel! I have another question if you don't mind where i can find
the realview_pbx_a9_qemu.exp file?
I can't find it in dejagnu/boards directory

-- 

Aurelio Remonda

Software Engineer
San Lorenzo 47, 3rd Floor, Office 5
Córdoba, Argentina
*Phone:* +54-351-4217888 / 4218211
<http://www.tallertechnologies.com> <http://www.tallertechnologies.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/devel/attachments/20150914/4749d1d5/attachment-0002.html>