Regarding GSOC 2016 BBB Mentor

[punit vara]

On Fri, Mar 11, 2016 at 7:13 PM, Marcos Díaz <
marcos.diaz at tallertechnologies.com> wrote:

> Hi, here at Taller we developed some patches for the BBB bsp.
> The idea of the bootloader is good, in order to not depend anymore on
> U-Boot.
> Other possible drivers are I2c, pwm and maybe others. We have I2c working
> on RTEMS, but using TI StarterWare drivers. you should port them to the
> RTEMS bsp.
> So, either me or Martin Galvan offer to be your mentor / co-mentor. I also
> think that BenGras can be very helpful for this BSP.
> Greetings.
>
> On Fri, Mar 11, 2016 at 6:49 AM, punit vara <punitvara at gmail.com> wrote:
>
>>
>>
>> On Fri, Mar 11, 2016 at 11:52 AM, Jarielle Catbagan <
>> jariellecatbagan at gmail.com> wrote:
>>
>>> Hello Punit,
>>>
>>> I was working on porting the MicroMonitor (uMon) bootloader to the BBB
>>> last year's GSoC 2015.  There is actually still some work that needs to be
>>> done.  At the moment, Ethernet functionality and booting application images
>>> still need to be implemented to get it to the point of making it a usable
>>> bootloader for the BBB.  If you're interested in pursuing this as a
>>> project, feel free to drop on by at umon-devel at rtems.org if you have
>>> any questions.
>>>
>>> Best,
>>> Jarielle
>>>
>>> On Thu, Mar 10, 2016 at 8:43 PM, punit vara <punitvara at gmail.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> I am ready with RTEMS hello world on Beagle bone black (
>>>> https://www.youtube.com/watch?v=FyOHU02bsvw&index=6&list=PL2muodf7ZnYcS18wkilESuJpZGj4mYSMJ)
>>>> and interested to improve BBB BSP . Currently I am testing GPIO and will
>>>> work on PWM driver for showcasing on my proposal. But I am afraid that I
>>>> have not listened anything from Ben Gras. Is some else will mentor me  ? If
>>>> not then should I stick with my BBB idea or go for another RTEMS project
>>>> for which some one can mentor me ? I have already asked this question
>>>> before but I am little worried that is why I created new thread. Any
>>>> suggestions will be appreciated.
>>>>
>>>> _______________________________________________
>>>> devel mailing list
>>>> devel at rtems.org
>>>> http://lists.rtems.org/mailman/listinfo/devel
>>>>
>>>
>>> Thank you Jarielle. I have idea too but I will look into your idea. But
>> I am worried about mentor .Usually Ben Gras mentor for BBB but this time I
>> don't know that's why I would like to know who can mentor me. If nobody is
>> going to mentor BBB this time then my proposal might be rejected :-(
>>
>> _______________________________________________
>> devel mailing list
>> devel at rtems.org
>> http://lists.rtems.org/mailman/listinfo/devel
>>
>
>
>
> --
>
> ______________________________
>
> <http://www.tallertechnologies.com>
>
>
> Marcos Díaz
>
> Software Engineer
>
>
> San Lorenzo 47, 3rd Floor, Office 5
>
> Córdoba, Argentina
>
>
> Phone: +54 351 4217888 / +54 351 4218211/ +54 351 7617452
>
> Skype: markdiaz22
>
> I am very much thankful to you Marcos. Right now I am trying to blink LED
with RTEMS. I will start working on PWM driver after that and then planned
to work on I2c as well as SPI BSPs. Please let me know correct direction if
I am missing something or going in wrong direction. :-)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/devel/attachments/20160311/ec8636bc/attachment-0002.html>