[PATCH 1/3] source-builder/config: Add couverture-qemu general config & build instructions.

[Cillian O'Donnell]

On Tue, 1 May 2018, 00:52 Chris Johns, <chrisj at rtems.org> wrote:

> On 28/04/2018 20:18, Cillian O'Donnell wrote:
> > ---
> >  source-builder/config/couverture-qemu-2-1.cfg | 104
> ++++++++++++++++++++++++++
>
> Why a new file? Could the existing qemu config be used?
>

We were thinking at the time that this would eventually replace the qemu
that's there so it was best if it was self contained. They are identical in
places so yes a lot of overlap.

>
> I would prefer to have as few of the global configs as possible and share
> them
> as much as possible.
>
> >  1 file changed, 104 insertions(+)
> >  create mode 100644 source-builder/config/couverture-qemu-2-1.cfg
> >
> > diff --git a/source-builder/config/couverture-qemu-2-1.cfg
> b/source-builder/config/couverture-qemu-2-1.cfg
> > new file mode 100644
> > index 0000000..b0a31bb
> > --- /dev/null
> > +++ b/source-builder/config/couverture-qemu-2-1.cfg
> > @@ -0,0 +1,104 @@
> > +#
> > +# This configuration file configure's, make's and install's
> Couverture-QEMU.
> > +#
> > +
> > +%if %{release} == %{nil}
> > +  %define release 1
> > +%endif
> > +
> > +#
> > +# The description.
> > +#
> > +Name:      couverture-qemu-%{qemu_version}-%{_host}-%{release}
> > +Summary:   Couverture-Qemu is a processor simulator with extra trace
> ability.
>
> I do not mind we have just the QEMU name and summary.
>
> > +Version:   %{qemu_version}
> > +Release:   %{release}
> > +URL:            https://github.com/AdaCore/qemu
> > +BuildRoot: %{_tmppath}/%{name}-root-%(%{__id_u} -n)
> > +
> > +#
> > +# List of architectures to be built
> > +#
> > +%define qemu_archs arm-softmmu,i386-softmmu,lm32-softmmu,mips-softmmu
> > +%define qemu_archs %{qemu_archs},ppc-softmmu,sparc-softmmu
>
> Why limit the archs?
>

These are the ones I tested that produced same results with rtems tester to
the existing qemu. I think there is also ones that aren't relevant to rtems.

>
> > +
> > +#
> > +# Prepare the source code.
> > +#
> > +%prep
> > +  build_top=$(pwd)
> > +
> > +  source_dir_qemu="qemu-%{qemu_version}"
> > +  %source setup qemu -n qemu-%{qemu_version}
>
> Why remove the -q?
>

>From our discussion last year
>     3. What does the -q option do in the %prep section of the build, this
>     option shows up in examples in the docs but there is no description of
>     what it does?
>
>     %source setup qemu -q -n qemu-%{qemu_version}

It is a spec file compatible option that is not used. You can remove the -q.

>
> > +  %patch setup qemu -p1
> > +
> > +  cd ${build_top}
> > +
> > +%build
> > +  build_top=$(pwd)
> > +
> > +  %{build_directory}
> > +
> > +  mkdir -p ${build_dir}
> > +  cd ${build_dir}
> > +
> > +  %if %{pkgconfig check vdeplug}
> > +    VDE_CONFIG="--enable-vde"
> > +    VDE_CFLAGS="%{pkgconfig cflags vdeplug}"
> > +    VDE_LDFLAGS="%{pkgconfig ldflags vdeplug} %{pkgconfig libs vdeplug}"
> > +  %endif
> > +
> > +  %{host_build_flags}
> > +
> > +  if test "%{_build}" != "%{_host}" ; then
> > +    CROSS_PREFIX_OPTION="--cross-prefix=%{_host}-"
> > +  fi
> > +
> > +  SYSROOT=$SB_TMPPREFIX
> > +
> > +  #
> > +  # The --extra-cflags and --extra-ldflags do not work as expected.
> > +  #
> > +  # Hack warning: MSYS2 does not seem to convert the path to
> > +  #               a shell path from Windows so we keep them
> > +  #               separate and handle it in the pkgconfig tool.
> > +  #
> > +  PKG_CONFIG_DEFAULT_PATH=${PKG_CONFIG_PATH} \
> > +  PKG_CONFIG_PATH=$SYSROOT/lib/pkgconfig \
> > +  PKG_CONFIG_BUILD_TOP_DIR=$SB_TMPROOT \
> > +  %{_ld_library_path}=$SYSROOT/lib \
> > +  LDFLAGS="-Wl,-rpath -Wl,/$SB_PREFIX_CLEAN/lib ${VDE_LDFLAGS}" \
> > +  CFLAGS="${CFLAGS} ${VDE_CFLAGS}" \
> > +  ../${source_dir_qemu}/configure \
> > +    --prefix=%{_prefix} \
> > +    ${CROSS_PREFIX_OPTION} \
> > +    --make=%{__make} \
> > +    --target-list=%{?with_qemu_archs:%{with_qemu_archs}}\
> > +                  %{!?with_qemu_archs:%{qemu_archs}} \
> > +    ${VDE_CONFIG} \
> > +    --disable-smartcard-nss \
> > +    --disable-tools \
> > +    --disable-pie \
> > +    --disable-vnc \
> > +    --disable-sdl \
> > +    --disable-gtk \
> > +    --disable-opengl \
> > +    --disable-netmap \
> > +    --disable-werror \
>
> Some of these lines have white space at the end which seems wrong.
>
> > +    --disable-virtfs \
> > +    --disable-docs
>
> Does the standard qemu build with these added?
>

Not sure, didn't test that.

>
> Chris
>
> > +
> > +  %{_ld_library_path}=$SYSROOT/lib \
> > +  %{__make} %{?_smp_mflags} all
> > +
> > +  cd ${build_top}
> > +
> > +%install
> > +  build_top=$(pwd)
> > +
> > +  %{__rmdir} $SB_BUILD_ROOT
> > +
> > +  cd ${build_dir}
> > +  %{_ld_library_path}=$SYSROOT/lib \
> > +  %{__make} DESTDIR=$SB_BUILD_ROOT install
> > +  cd ${build_top}
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/devel/attachments/20180501/9231a07c/attachment-0001.html>