GDB Server for m68k

[Gus Paolone]

Thanks to all for the tips. I guess I forgot to look in the most obvious
place first. I'll give "m68k-stub.c" a go.

Thanks again.

Gus

Chris Johns wrote:
> 
> Gus Paolone wrote:
> >
> > Hi all;
> >
> > Has anybody implemented a gdb server for a m68k target? I'm particularly
> > interested in  "set breakpoint, step, etc" functions.
> >
> > I'm interested in connecting my target (68360) over a serial port. I'm
> > familiar with the gdb serial protocol, but I expect implementing code to
> > manage debug control such as "step" to be difficult to implement.
> >
> > Any help, suggestions or pointers to information would be greatly
> > appreciated.
> >
> 
> GDB source code has an example m68k stub. I also found this link on the
> gdb web page :
> 
>   http://sourceforge.net/project/?group_id=1541
> 
> --
>  Chris Johns, mailto:ccj at acm.org