Running RTEMS samples on MCP750

[Eric Valette]

Stefan Asserhall wrote:
> 
> We've successfully built RTEMS for the powerpc MCP750, but the samples
> won't run the way we expected. Should it be possible to do the following?
> If not, how should it be done?
> 
>  cd mcp750/samples
>  ppc-gdb hello.exe
>  ...
>  (gdb) target ppcbug /dev/ttyS1
>  ...
>  (gdb) load
>  .entry_point_section    : 0x00000000 .. 0x00000004
>  .text   : 0x00003000 .. 0x0001e4cc
>  ...
>  (gdb) run
>  ...
> 
> For us the processor dies after run, and must be reset.
> 
> Stefan Asserhäll
> 
> PS. This is probably a VERY stupid question...

This will not work because PPCBUG exceptions are removed to install
rtems one...
-- 
   __                 
  /  `                   	Eric Valette - Canon CRF
 /--   __  o _.          	Canon Development Europe Team Leader
(___, / (_(_(__         	Rue de la touche lambert
				35517 Cesson-Sevigne  Cedex
				FRANCE
Tel: +33 (0)2 99 87 68 91	Fax: +33 (0)2 99 84 11 30
E-mail: valette at crf.canon.fr	http://www.crf.canon.fr