RTEMS port to Virtex-4/PowerPC

[Kate Feng]

Kate Feng wrote:

> "Robert S. Grimes" wrote:
>
> > Hi all,
> >
> > After many years of quietly monitoring RTEMS, while promoting it as
> > something to consider, I may finally have found an opportunity to use it
> > outside of a simple demo on Bochs!  The system I'm working on requires
> > the high-speed logic available in the new Xilinx Virtex-4 devices, and
> > I'm thinking of using the FX family that includes an embedded PowerPC
> > 405 hard core processor.  I'll be buying a ML403 development board which
> > includes all the goodies (e.g. dual Ethernet, 8 MB Flash, 64 MB SDRAM,
> > Compact Flash interface, etc.)
> >
> > Questions.
> >
> > 1. I suppose the processor I start with is libcpu/powerpc/ppc403 - is
> > this correct?
> >
> > 2. As for the BSP, do I start with libbsp/powerpc/gen405 - is this correct?
> >
> > Anyway, I would be happy to share my experiences, time allowing of
> > course, and of course any hints or pointers would be greatly
> > appreciated!  If others are interested in collaborating, or just want to
> > see how it's going, let me know...
>
> I are looking at  Virtex-II Pro FG456 development board, which is very

I meant "We are looking at the  Virtex-II Pro FG456 development board,
......  "  (Please excuse me for the typing error. )  -- Kate

>
> similar to ML403 (Virtex-4 FPGA).  Virtex-4 have better DPS supports,
> and slightly faster processor power, but it has no RocketI/Os support
> yet, which is what we need.
>
> We will be interested in collaborating and see how it's going.
>
> Kate
>
> >
> >
> > -Bob
> >
> > RSG Associates
> > rsg at ll dot mit dot nospam dot edu