current cvs on powerpc

[Ed Sutter]

Jennifer,
Yea, I thought I recalled reading that in the archives however,
is there a configure option (or something else) that will cause the
rtems build to use new vs old?  I did nothing to cause the gen405 to
use the old-exception model, that's just what it built with, so I assumed
that was the correct model to use for that bsp.
Ed

> About 3 months ago I converted all of the submitted powerpc bsps from
> old-exceptions to new-exceptions.  Eventually, we will stop support for
> the old-exception model.  The ss555 was one of the bsps converted.
> 
> Jennifer
> 
> 
>>Is powerpc supposed to use new-exceptions or old-exceptions?
>>We just built gen405 and it used old-exceptions.  Any chance
>>that is your issue?
>>Ed
>>
>>
>>>Hi all,
>>>
>>>still trying to compile RTEMS for PowerPC, getting further, but:
>>>
>>>------------------------ cut -----------------------------------
>>>
>>>powerpc-rtems-gcc --pipe -B../../../../.././lib/
>>>-B../../../../.././ss555/lib/ -
>>>specs bsp_specs -qrtems -Wall -mcpu=505 -Dmpc555 -Dss555 -O4
>>>-fno-keep-inline-fu
>>>nctions   -o new-exceptions/rtems-cpu.rel -qnolinkcmds -nostdlib -Wl,-r
>>>new-exce
>>>ptions/new_exceptions_rtems_cpu_rel-cpu.o new-exceptions/cpu_asm.o
>>>powerpc-rtems-gcc: new-exceptions/cpu_asm.o: No such file or directory
>>>gmake[5]: *** [new-exceptions/rtems-cpu.rel] Error 1
>>>gmake[5]: Leaving directory
>>>`/SHARED1/RTEMS/build-rtems-cvs/powerpc-rtems/c/ss55
>>>5/lib/libcpu/powerpc'
>>>gmake[4]: *** [all-recursive] Error 1
>>>gmake[4]: Leaving directory
>>>`/SHARED1/RTEMS/build-rtems-cvs/powerpc-rtems/c/ss55
>>>5/lib/libcpu'
>>>gmake[3]: *** [all-recursive] Error 1
>>>gmake[3]: Leaving directory
>>>`/SHARED1/RTEMS/build-rtems-cvs/powerpc-rtems/c/ss55
>>>5/lib'
>>>gmake[2]: *** [all-recursive] Error 1
>>>gmake[2]: Leaving directory
>>>`/SHARED1/RTEMS/build-rtems-cvs/powerpc-rtems/c/ss55
>>>5'
>>>gmake[1]: *** [all-recursive] Error 1
>>>gmake[1]: Leaving directory
>>>`/SHARED1/RTEMS/build-rtems-cvs/powerpc-rtems/c'
>>>make: *** [all-recursive] Error 1
>>>
>>>------------------------ cut -----------------------------------
>>>
>>>Anybody working on the PowerPC tree ?
>>>
>>>Thanks
>>
>>
>