Xilinx IP core drivers for RTEMS- Keith Robertson still around?

[Robert S. Grimes]

Consider yourself kicked - with all due respect, of course!

Ed Sutter wrote:
> Great.
> I have code examples for hooking up RTEMS to uMon, plus I've hooked
> up TFS to RTEMS FS also.  It hasn't been heavily tested, but if you
> think you can use it lemme know and I'll try to find it.
> Maybe that will *finally* kick me in the butt enough to put this
> info on the RTEMS Wiki also.
> Ed
>
> Robert S. Grimes wrote:
>
>> Hi Ed,
>>
>> Oh, yeah - you did - works great, too!
>>
>> -Bob
>>
>> Ed Sutter wrote:
>>
>>> Bob,
>>> I gave you what I have for the ML403/micromonitor stuff right?
>>> If you need help with that, lemme know.
>>> Ed Sutter
>>>
>>> Robert S. Grimes wrote:
>>>
>>>> Hi Greg,
>>>>
>>>> Please, less formality - Bob is fine by me!
>>>>
>>>> Sounds like I'll be following you, I guess!  I had originally (as 
>>>> in earlier today) thought I'd finish my MicroMonitor work first, 
>>>> but perhaps I should move RTEMS up first.  It doesn't really matter 
>>>> too much for me, and hopefully I'll be able to contribute more - 
>>>> given your schedule.
>>>>
>>>> Do you have the TEMAC working yet?  Or are you using one of the 
>>>> "soft" IP cores?  What serial port core are you using?
>>>>
>>>> Take care,
>>>>
>>>> gregory.menke at gsfc.nasa.gov wrote:
>>>>
>>>>> Thanks Robert!
>>>>>
>>>>> Exactly what I needed.  Over the next few days I will be working the
>>>>> patches in and comparing to the firmware as its been specified in our
>>>>> board- its quite similar to an ML403.  We do have flexibility wrt the
>>>>> Virtex firmware so reconfigs there will not be an issue.  I think the
>>>>> goal will be to create a proper bsp to support our board.  The 
>>>>> initial
>>>>> tests will be RTEMS running our flight software, taking data in 
>>>>> over a
>>>>> serial port and transmitting out of ethernet.
>>>>>
>>>>> I'd be happy to share the RTEMS portions of the work & collaborate
>>>>> wherever its feasable.  We have to be running & stable by the end of
>>>>> August so development is going to be brisk over the next couple 
>>>>> weeks.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Greg
>>>>>
>>>>>
>>>>> Robert S. Grimes writes:
>>>>>  > Hi Greg,
>>>>>  >  > I'm in the same boat as you.  Keith has sent me his diffs, 
>>>>> which I  > include here.  Note that they are against a little 
>>>>> older version  > (V4.6.5) of RTEMS, and should work on a suitably 
>>>>> configured Xilinx ml403  > board.  You'll have to make sure your 
>>>>> V4 configuration is compatible  > with his stuff, or change one 
>>>>> side or another...
>>>>>
>>>>>
>>>>>   
>>>
>>>
>>>
>
>