SV: RTEMS 4.6.4 fails on Cygwin

[Ole Hansen]

Hello Angelo

Is there a 'safe way' to build RTEMS(386/ppc/arm) under Cygwin.

I can build tools, but trying to build RTEMS itself fails.

 best regards
 
 ole at danelec.dk

* Software Manager 
 * danelec electronics a/s
 * Blokken 44
 * DK-3460 Birkeroed
 * DENMARK
  * Phone: +45 45821879
   * Fax:  +45 45821979
    * Email: ole at danelec.dk
     * http://www.danelec.dk
      * ftp://ftp.danelec.dk
       * Radio call sign: oz1jru
        ***************************************************************
        *    If you seek luck, luck will strike you ..... 8o)         *
        ***************************************************************



> -----Oprindelig meddelelse-----
> Fra: Angelo Fraietta [mailto:newsgroups at smartcontroller.com.au]
> Sendt: 9. marts 2006 21:54
> Til: RTEMS Users
> Emne: Re: RTEMS 4.6.4 fails on Cygwin
> 
> 
> I get the same error
> 
> xr wrote:
> > I use cygwin(gcc4.0.2) to build rtems(4.7beta), it is OK
> > I think, you may lack some thing(M4, automake with rtems diff,etc), 
> > thougth I donot sure wether these makes any difference in build a 
> > release version. How about make a pc586 version?
> >  
> > 
> --------------------------------------------------------------
> ----------
> > xr
> > 2006-03-09
> >  >  Greetings  all
> >  >
> >  >  I  have  successfully  built  RTEMS  4.6.4  on  Linux  
> and  Mac  OSX 
> >  by  building
> >  >  GCC  3.3.5  and  then  building  tools  and  RTEMS
> >  >
> >  > 
> >  
> http://www.smartcontroller.com.au/~angelo/rtems/RTEMSForSmartC
> ontroller.html
> >  >
> >  >
> >  >  I  attempted  to  do  this  on  CYGWIN,  however,  it  failed 
> >  during  the  building
> >  >  of  RTEMS
> >  >  http://www.smartcontroller.com.au/~angelo/rtems/BuildRtems.html
> >  >
> >  >  I  tried  with  both  pc386  and  pc386dx
> >  >
> >  >  Making  preinstall  in  make
> >  >  gmake[4]:  Entering  directory
> >  >  `/cygdrive/d/develop/CDRTEMS/build/i386-rtems/c/pc3
> >  >  86/make'
> >  >  gmake[4]:  Nothing  to  be  done  for  `preinstall'.
> >  >  gmake[4]:  Leaving  directory
> >  >  `/cygdrive/d/develop/CDRTEMS/build/i386-rtems/c/pc38
> >  >  6/make'
> >  >  Making  preinstall  in  optman
> >  >  gmake[4]:  Entering  directory
> >  >  `/cygdrive/d/develop/CDRTEMS/build/i386-rtems/c/pc3
> >  >  86/optman'
> >  >  Makefile:567:  ***  multiple  target  patterns.    Stop.
> >  >  gmake[4]:  Leaving  directory
> >  >  `/cygdrive/d/develop/CDRTEMS/build/i386-rtems/c/pc38
> >  >  6/optman'
> >  >  gmake[3]:  ***  [preinstall-recursive]  Error  1
> >  >  gmake[3]:  Leaving  directory
> >  >  `/cygdrive/d/develop/CDRTEMS/build/i386-rtems/c/pc38
> >  >  6'
> >  >  gmake[2]:  ***  [pc386]  Error  1
> >  >  gmake[2]:  Leaving  directory
> >  >  `/cygdrive/d/develop/CDRTEMS/build/i386-rtems/c'
> >  >  gmake[1]:  ***  [all-recursive]  Error  1
> >  >  gmake[1]:  Leaving  directory
> >  >  `/cygdrive/d/develop/CDRTEMS/build/i386-rtems/c'
> >  >  make:  ***  [all-recursive]  Error  1
> >  >
> >  >  Any  suggestions  as  to  how  I  can  get  it  fixed  quick?
> >  
> > --
> > Angelo  Fraietta
> >  
> > PO  Box  859
> > Hamilton  NSW  2303
> >  
> > Home  Page
> >  
> >  
> > http://www.smartcontroller.com.au/~angelo/
> >  
> > There  are  those  who  seek  knowledge  for  the  sake  of 
>  knowledge 
> >  -  that  is
> > CURIOSITY
> > There  are  those  who  seek  knowledge  to  be  known  by  
> others  - 
> >  that  is  VANITY
> > There  are  those  who  seek  knowledge  in  order  to  
> serve  -  that 
> >  is  LOVE
> >          Bernard  of  Clairvaux  (1090  -  1153)
> >  
> >  
> 
> -- 
> Angelo Fraietta
> 
> PO Box 859
> Hamilton NSW 2303
> 
> Home Page
> 
> 
> http://www.smartcontroller.com.au/~angelo/
> 
> There are those who seek knowledge for the sake of knowledge - that is
> CURIOSITY
> There are those who seek knowledge to be known by others - 
> that is VANITY
> There are those who seek knowledge in order to serve - that is LOVE
>     Bernard of Clairvaux (1090 - 1153)
> 
> 
>