c++ blackfin toolchain

[Joel Sherrill]

Ralf Corsepius wrote:
> On Tue, 2008-11-18 at 09:11 -0600, Joel Sherrill wrote:
>   
>> Ralf Corsepius wrote:
>>     
>>> On Tue, 2008-11-18 at 08:36 -0600, Joel Sherrill wrote:
>>>   
>>>       
>>>> MOLM wrote:
>>>>     
>>>>         
>>>>> I have just installed toolchain and rtems 4.9 for the bf537 stamp 
>>>>> board, and are able to compile the "hello world" sample - great! 
>>>>> However, is there a reason for the g++ toolchain is missing for the 
>>>>> blackfin architecture? Is it possible to build this support from 
>>>>> source? 
>>>>>           
>
>   
>> Well together we remember "didn't work at one time so
>> disabled."
>>     
>>>> Ralf have you checked this recently?
>>>>     
>>>>         
>>> No. TBD.
>>>       
>
> Done - gcc-4.3.2/newlib-1.16.0 (aka current rtems-4.10 toolchain
> sources) builds bfin-gcc-c++ without any eye-striking problems[1].
>
> I am going to add c++ for the bfin for the rtems-4.10-toolchains.
>
> Ralf
>
> [1] Of course, this doesn't mean much ;)
>
>
>   
If someone can help verify that the latest Skyeye code runs
the RTEMS bfin BSPs correctly, I can then turn on running the
GCC C and C++ tests on this target.

I hadn't turned bfin tool testing on because the bfin skyeye
code still didn't run the BSP out of the box.

--joel


-- 
Joel Sherrill, Ph.D.             Director of Research & Development
joel.sherrill at OARcorp.com        On-Line Applications Research
Ask me about RTEMS: a free RTOS  Huntsville AL 35805
   Support Available             (256) 722-9985