Integrating RTEMS with ARM Cortex R4
jiri.freyvald at gmail.com
Sat Jan 26 14:07:01 UTC 2013
-------- Original Message --------
Subject: Re: Integrating RTEMS with ARM Cortex R4
Date: Sat, 26 Jan 2013 14:01:55 +0000
From: Jiri Freyvald <jiri.freyvald at gmail.com>
To: priteshgudge at gmail.com
I have been using RTEMS port for Cortex-M4 and so far it works perfectly
(namely STM32F4DISCOVERY board, STM32F407 processor)
I don't know how close M4 and R4 cores are, but I guess porting BSP from
R4 to M4 shouldn't be too difficult.
On 25/01/13 22:31, Pritesh Gudge wrote:
> I am new to RTEMS. I am using an ARM Cortex R4 CPU which is based on
> This is the wiki page which says that Cortex R4 CPUs are supported.
> I am currently using Texas Instruments Hercules Development Kit which
> has ARM Cortex R4 CPU along with 256 KB SRAM
> and 3MB Flash Memory. It also has 8MB SDRAM. I want to use RTEMS as it
> is excellent for Experimental Physics and Industrial Control System
> http://www.aps.anl.gov/epics/. But I did not find any relevant
> documentation which explains the configuration procedure for ARMv7.
> Could anyone kindly guide me with the relevant procedure and specifics
> I must apply to get RTEMS running on the given Embedded Microcontroller.
> Pritesh Gudge
> Research Apprentice
> IRI-Goethe University
> Frankfurt am Main
> Email: gudge at iri.uni-frankfurt.de <mailto:gudge at iri.uni-frankfurt.de>
> Phone: +49 1522 719 0787
> rtems-users mailing list
> rtems-users at rtems.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the users