Selecting a BSP

[SAeeD]

Hello Everett,

I'm working on RTEMS using LPC32XX for about a year and it supports UART,
I've used it many times.
There is a library for I2C bus and some drivers for I2C and SPI devices
like Flash, EEPROM, and SD card available in RTEMS, though I haven't used
them. But I think it may not be a tough job to use them on LPC32XX.
Maybe there are better BSPs to suit your demand but AFAIK LPC32XX is a good
ARM-based implemented BSP in RTEMS.

SAeeD


On Thu, Jul 18, 2013 at 10:11 PM, 王峰 <everteq at 163.com> wrote:

> Hi All,
>
> I am doing a project that requires UART, SPI and I2C. It also has
> considerable computing
> needs. So I narrowed it down to ARM9 or better with VFP. It would be very
> nice to try
> beaglebone black. But it seems that not all peripherals are supported and
> I think I am
> not capable to add the capability. I googled RTEMS and found LPC32XX seems
> to match
> my needs. But it still not clear to me if the UART, SPI and I2C are
> supported under RTEMS
>
> Can anyone give me some advices on the selection of the board?
>
> Thanks in advance.
>
> Everett
>
>
>
> _______________________________________________
> rtems-users mailing list
> rtems-users at rtems.org
> http://www.rtems.org/mailman/listinfo/rtems-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/users/attachments/20130719/5a8746fd/attachment-0001.html>