Porting an embedded application to an RTEMS

[Sebastian Huber]

On 03/12/2013 01:54 AM, manish jain wrote:
> Does a BSP exist for that hardware and did you run the examples on that BSP ?
> If I am right(I am completely newbie here), BSP is written for an specific OS
> but the application which we want to port does not  use any operating system at
> all only "C" but it supports two different architecture(STM32  and LPC21xx) and
> has drivers for this architecture and for many "mcu" peripheral like "I2c and
> SPI". And when I looked at the architectures supported by RTEMS I was not able
> to find any port for this two processor.

There is a BSP for the STM32F4 Discovery evaluation board.  The LPC2100 family 
is a bit low powered for RTEMS if you use only on-chip resources.  Please have 
a look at the LPC1700 (or LPC2400).

-- 
Sebastian Huber, embedded brains GmbH

Address : Dornierstr. 4, D-82178 Puchheim, Germany
Phone   : +49 89 189 47 41-16
Fax     : +49 89 189 47 41-09
E-Mail  : sebastian.huber at embedded-brains.de
PGP     : Public key available on request.

Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.