STM32F4Discovery

[Steven Grunza]

It's working now.  I was using the wrong pin for the USART in addition 
to using the wrong USART (I was expecting output on USART1 but it is on 
USART3).

On 6/19/2014 12:09 AM, Mr. Andrei Chichak wrote:
> I am using openOCD 0.8.0 on the latest MacOS through the Eclipse RTEMS mods.
>
> After figuring out how it all goes together, it seems to work better than many of the commercial debuggers that I have been using recently (looking at you Microchip and P&E).
>
> Andrei
>
>
> On 2014-June-18, at 6:21 PM, Chris Johns <chrisj at rtems.org> wrote:
>
>> On 19/06/2014 4:16 am, Steven Grunza wrote:
>>> The BSP mentions that https://github.com/texane/stlink was used to debug
>>> on Linux.  I'm trying to use openOCD 0.7.0 on Fedora 20.
>>>
>> The RSB has support to build stlink. I have not done so in a long time.
>>
>> Chris
>>


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com