attaching an interrupt in beaglebone bsp

[Angelo Fraietta]

It was not, so I installed it, did a make clean and had same error

On Wed, Jun 17, 2015 at 5:36 PM, Chris Johns <chrisj at rtems.org> wrote:

> On 17/06/2015 5:24 pm, Angelo Fraietta wrote:
> > Fails here during build
> >
> > make[6]: Leaving directory
> >
> `/home/angelo/development/rtems/b-beagle/arm-rtems4.11/c/beagleboneblack/testsuites/libtests/syscall01'
> > Making all in dl01
> > make[6]: Entering directory
> >
> `/home/angelo/development/rtems/b-beagle/arm-rtems4.11/c/beagleboneblack/testsuites/libtests/dl01'
> > arm-rtems4.11-gcc -B../../../../../beagleboneblack/lib/ -specs bsp_specs
> > -qrtems -DHAVE_CONFIG_H -I.
> > -I../../../../../../../rtems-src/c/src/../../testsuites/libtests/dl01
> > -I..
> >
> -I../../../../../../../rtems-src/c/src/../../testsuites/libtests/../support/include
> >   -mcpu=cortex-a8 -O2 -g -Wall -Wmissing-prototypes
> > -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT
> > dl-o1.o -MD -MP -MF .deps/dl-o1.Tpo -c -o dl-o1.o
> >
> ../../../../../../../rtems-src/c/src/../../testsuites/libtests/dl01/dl-o1.c
> > mv -f .deps/dl-o1.Tpo .deps/dl-o1.Po
> > w -f dl.tar dl-o1.o
> >  22:50:56 up 10 days, 16:36,  1 user,  load average: 0.91, 0.56, 0.27
> > USER     TTY        LOGIN@   IDLE   JCPU   PCPU WHAT
> > ../../../../../../tools/build/rtems-bin2c -C dl.tar dl-tar.c
> > cannot open dl.tar for reading
> > make[6]: *** [dl-tar.c] Error 1
>
> Do you have pax installed on your system ?
>
> Ideally configure should check for this.
>
> Chris
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rtems.org/pipermail/users/attachments/20150618/9b7f0377/attachment-0002.html>