RTEMS booting problem for PICO-PI-IMX7 board.

[JunBeom Kim (EmbedCoreTech)]

Dear Sebastian,

No problem.

I found that there is difference for accessing GT between Cortex-A7(i.MX7D) and Cortex-A9(i.MX6Q) by ARM technical manual. Therefore, arm-a9mpcore-clock-config.c should be not used for Cortex-A7 based SoC.

If I have update in my side regarding RTEMS testing on PICO-PI-IMX7, I will let you know that.

At this time, I am focusing i.MX6Q regarding SMP and USB Host, too.

On referencing, I was successful to boot SMP kernel without u-boot on i.MX6Q. but, there is still problem for booting SMP kernel with u-boot.
I guess that current problem is related with u-boot.

Best Regards,
JunBeom Kim / EmbedCoreTech

-----Original Message-----
From: Sebastian Huber <sebastian.huber at embedded-brains.de> 
Sent: Monday, April 16, 2018 2:46 PM
To: JunBeom Kim (EmbedCoreTech) <jbkim at e-coretech.kr>; users at rtems.org
Subject: Re: RTEMS booting problem for PICO-PI-IMX7 board.

Hello Kim,

On 13/04/18 10:04, JunBeom Kim (EmbedCoreTech) wrote:
> Dear Sebastian,
>
> I returned to your original code from arm-a9mpcore-clock-config.c to arm-generic-timer-config.c.
> ( Reason ) Global timer register and SCU register can not be accessed by direct memory access. Instead of this, CP15 control access should be used.
>
> Is it correct ?

sorry, I don't have time currently to look at the details of this chip.

-- 
Sebastian Huber, embedded brains GmbH

Address : Dornierstr. 4, D-82178 Puchheim, Germany
Phone   : +49 89 189 47 41-16
Fax     : +49 89 189 47 41-09
E-Mail  : sebastian.huber at embedded-brains.de
PGP     : Public key available on request.

Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.