[rtems commit] Remove. File is not supposed to be on rtems-4.10-branch.

[Ralf Corsepius]

Module:    rtems
Branch:    4.10
Commit:    5bc90a57475a6309256a5509b854d779d4d22592
Changeset: http://git.rtems.org/rtems/commit/?id=5bc90a57475a6309256a5509b854d779d4d22592

Author:    Ralf Corsépius <ralf.corsepius at rtems.org>
Date:      Thu Jul 26 07:41:43 2012 +0200

Remove. File is not supposed to be on rtems-4.10-branch.

---

 c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in |   88 ---------------------
 1 files changed, 0 insertions(+), 88 deletions(-)

diff --git a/c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in b/c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in
deleted file mode 100644
index 639a9ad..0000000
--- a/c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in
+++ /dev/null
@@ -1,88 +0,0 @@
-/* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */
-
-/* If defined, then the BSP Framework will put a non-zero pattern into the
-   RTEMS Workspace and C program heap. This should assist in finding code that
-   assumes memory starts set to zero. */
-#undef BSP_DIRTY_MEMORY
-
-/* If defined, print a message and wait until pressed before resetting board
-   when application exits. */
-#undef BSP_PRESS_KEY_FOR_RESET
-
-/* If defined, reset the board when the application exits. */
-#undef BSP_RESET_BOARD_AT_EXIT
-
-/* disable testsuite samples with high memory demands */
-#undef BSP_SMALL_MEMORY
-
-/* reset vector address for BSP start */
-#undef BSP_START_RESET_VECTOR
-
-/* ARM clock in Hz */
-#undef LPC32XX_ARM_CLK
-
-/* clock configuration for UART 3 */
-#undef LPC32XX_CONFIG_U3CLK
-
-/* clock configuration for UART 4 */
-#undef LPC32XX_CONFIG_U4CLK
-
-/* clock configuration for UART 5 */
-#undef LPC32XX_CONFIG_U5CLK
-
-/* clock configuration for UART 6 */
-#undef LPC32XX_CONFIG_U6CLK
-
-/* clock mode configuration for UARTs */
-#undef LPC32XX_CONFIG_UART_CLKMODE
-
-/* disable MMU */
-#undef LPC32XX_DISABLE_MMU
-
-/* disable MMU protection of read-only sections */
-#undef LPC32XX_DISABLE_READ_ONLY_PROTECTION
-
-/* disable cache for read-write data sections */
-#undef LPC32XX_DISABLE_READ_WRITE_DATA_CACHE
-
-/* enable RMII for Ethernet */
-#undef LPC32XX_ETHERNET_RMII
-
-/* AHB bus clock in Hz */
-#undef LPC32XX_HCLK
-
-/* main oscillator frequency in Hz */
-#undef LPC32XX_OSCILLATOR_MAIN
-
-/* RTC oscillator frequency in Hz */
-#undef LPC32XX_OSCILLATOR_RTC
-
-/* peripheral clock in Hz */
-#undef LPC32XX_PERIPH_CLK
-
-/* baud for UART 1 */
-#undef LPC32XX_UART_1_BAUD
-
-/* baud for UART 2 */
-#undef LPC32XX_UART_2_BAUD
-
-/* baud for UART 7 */
-#undef LPC32XX_UART_7_BAUD
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION